Rivet Nuts Inserts - Sherex Fastening Solutions by Huyett

Fastening Systems Engineered For Performanceâ&#x201E;¢

RIVET NUT INSERT CATALOG

AS9100, ISO 9001:2015 AND IATF 16949:2016 CERTIFIED

TABLE OF CONTENTS

general information

page

About Us.........................................................................................................................................2-3 Rivet Nut Introduction....................................................................................................................4-6 hex body rivet nuts

Product Line Overview...................................................................................................................... 7 Full Hex Inch Body - Inch and Metric Threads FHK/FHL....................................................................................................................................... 8 CFH/CFHD.................................................................................................................................... 9 LRGH.......................................................................................................................................... 10 Full Hex Metric Body - Metric Threads HUPO/HUKO............................................................................................................................. 11 Half Hex Inch Body - Inch and Metric Threads CAH............................................................................................................................................ 12 Half Hex Metric Body - Inch and Metric Threads HUPO/HUKO............................................................................................................................. 13 round body rivet nuts

Product Line Overview .................................................................................................................... 14 Inch Body - Inch and Metric Threads CAO Smooth, small flange......................................................................................................... 15 CA

Smooth, large flange........................................................................................................... 16

LRGR Smooth, large flange, large diameter................................................................................ 17 CPB Slotted, pre-bulbed, large flange.......................................................................................... 18 CPN Smooth, straight shank, large flange................................................................................... 19 CAK Knurled, small flange......................................................................................................... 20 CAL Knurled, large flange.......................................................................................................... 21 CFT/CAT Knurled, small flange, heavy duty, 360 swaging........................................................... 22 CFW/CAW Diamond knurled, small flange, heavy duty, 360 swaging........................................ 23 Riv-Float ® / Riv-Float ® - Short Floating Nut, Self-Aligning.......................................................24-25 NAS/MS Rivet Nuts Flat and Countersunk Heads..................................................................26-29

TABLE OF CONTENTS page

Metric Body - Inch and Metric Threads UPO/UFO Smooth, large and countersunk flange...................................................................... 30 UKO Smooth, small flange......................................................................................................... 31 UPO RS/UFO RS Knurled, large and countersunk flange........................................................... 32 CLM/CKM Knurled, large and small flange................................................................................. 33 other rivet nut products

Rivet Nut Studs Rivet Nut and Screw Combination........................................................................ 34 Kits & Bags..................................................................................................................................35-36 specialty fastener solutions

Product Showcase.......................................................................................................................37-38 fastener installation systems

Overview......................................................................................................................................... 39 Hand Tools....................................................................................................................................... 40 Pneumatic Tools (Spin-Spin).............................................................................................................. 41 Hydro-Pneumatic Tools (Spin-Pull)..............................................................................................42-44 technical information

Rivet Nut Coatings............................................................................................................................ 45 Rivet Nut Sealants............................................................................................................................ 46 Mechanical Lock & LocsertÂŽ............................................................................................................. 47 Testing Methods............................................................................................................................... 48 Decimal Equivalents & Drill Size Chart............................................................................................ 49 additional information

Value Propositions............................................................................................................................ 50 Sherex Product Matrix...................................................................................................................... 51 Sherex Website & 3D Model Downloads.......................................................................................... 52 Additional Sherex Product Lines....................................................................................................... 53

ABOUT US ABOUT SHEREX

Sherex Industries was founded in 1979 in Buffalo, NY primarily serving the Automotive About Sherex and Fluid Sherex Power markets. In 2004, the rivet nut division was spun off, and became Sherex About Fastening Solutions. Throughout our 40 year history, we’ve remained steadfast in our Fluid Power markets. mission to deliver Fluid Power markets.high quality fastening solutions at the lowest total installed cost. We’ve expanded and improved our offerings and services by creating proprietary products, forming mission to deliver high quality fastening solutions at the lowest total installed cost. We’ve strategic and establishing world-class production facilities customer mission topartnerships, deliver high quality fastening solutions at the lowest total installed cost. and We’ve support centers in Taiwan, Mexico, The U.K., and Akron, Ohio. strategicpartnerships, partnerships, and establishing world-class production facilities and customer strategic and establishing world-class production facilities and customer Blind RivetNut Nut sprovide provide load-bearing threads in knowledgeable assembled aTaiwan, team ofMexico, experienced, engineering and technical sales BlindWe’ve Rivet s load-bearing threads in support centers in and Akron, Ohio. support centers inthat Taiwan, Mexico, and Akron, Ohio. thin sheet tmaterials materials a re too thinfor a tapp that are to exceeding our customers’ needsand by collaborating to create thin professionals shee thataare toodedicated thinfor a tapp ed ed We’veassembled assembled team of experienced, knowledgeable engineering technical We’ve a team of experienced, knowledgeable engineering and technical sales sales thread. BlindRivet RivetNuts Nuts also used when thread. Blind also areare used when an an customized, application-specific solutions. professionals that are dedicated to exceeding our customers’ by collaborating professionals that are dedicated to exceeding our customers’ needs needs by collaborating to createto create app lication lication haslittle little access to the backside has oror nono access to the backside as they theyca ca

RivetNut NutIntrodu Introdu ction Rivet ction

Advantages of Rivet Nuts

Rivet Nuts provide a stron g thread in thin materials that canno t be tapp . ed

Rivet Nuts can be installed from on e side fothe work piece , also known as a “Blind App lication.”

Presence Rivet Global Nuts can be installed from on e side fothe work piece , also known as a “Blind App lication.” Rivet Nuts work great wheneasy disassembly and reassembly of produ cts is requ ired . Sherex provides service and support to our customers around the world through a network of Global Presence Rivet Nuts work when easy di disassembly reassembly produ is requ . berglass. We are Rivet nu ts can be great installed in many erent kind sand of material includofing stee l,cts plastic andired Sherex provides service and support to our customers around the world through a network of GLOBAL PRESENCE a partner in We are Rivet nu ts can be installed in many di erent kind s of material includ ing stee l, plastic and Sherex provides service and support to our customers around the world through aberglass. network Once Rivet Nuts arework installed add ition al compon ents with thread ed fasteners can betools, att ached. that together to provide a comprehensive range of products, automation, a partner in of sales offices, technical support centers, distribution hubs, and manufacturing facilities. Rivet Nuts nothat t nee dinstalled to be welded the baseamaterial. Once RivetdoNuts arework add ition al compon ents with thread ed fasteners can betools, att ached. together totoprovide comprehensive range of products, automation, Prepainted willdnotot be during the Rivet Nut installation process. Rivet Nuts material do no t nee be damaged welded to the base material. Sherex Headquarters

Sherex U.K.

Rivet Nuts are available in many di erent styles &materials for many di erent ind k s of Prepainted material will no t be damaged during theNY Rivet Nut installation process. Buﬀalo, app lication s.

Sherex Headquarters Sherex Rivet Nuts are available in many di erent styles &materials for many di erentU.K. ind k s of Applications : Industries Buﬀalo, NY app lication s. Rivet nu ts are used in a variety o ndu stries: Aerospace

Applications : Industries Sherex Akron Automotive HVAC

Ag/Con struction Equ ipment

Ligh ting Electron ics o Medical Rivet nu ts are used in a variety ndu stries: Sherex Akron Automotive HVAC Aerospace

Railways

Sherex Mexico

Ligh ting 1

Electron ics

Ag/Con struction Equ ipment

Medical

Sherex Taiwan

Railways

Sherex Taiwan

Sherex Mexico Sherex Fastening Solutions

•

Sherex Fastening Solutions

Phone: 866-474-3739

•

Fax: 716-875-0358

Phone: 866-474-3739

Sherex Fastening Solutions

•

www.sherex.com

Fax: 716-875-0358

866-474-3739

•

E-mail: info@sherex.com

www.sherex.com

•

E-mail: info@sherex.com

info@sherex.com

ABOUT ABOUT US US ABOUT US ABOUT US

World ManufacturingFACILITIES Facilities WORLDClass CLASS MANUFACTURING World Class Manufacturing Facilities

Sherex has two strategically-located, ISO certified manufacturing facilities in Chungli Sherex has two strategically-located, ISOproduce certified amanufacturing in Chungli City, Taiwan, and Akron, Ohio that wide variety facilities of fasteners. Sherex has two strategically-located, ISO certified manufacturing facilities in Chungli City, Taiwan, and Akron, Ohio that produce a wide variety of fasteners. World Class Manufacturing Facilities City, Taiwan, and Akron, Ohio that produce a wide variety of fasteners. SHEREX TAIWAN SHEREXAkron AKRON Sherex Sherex Taiwan Sherex has two strategically-located, ISO certified manufacturing facilities in Chungli Sherex Akron Sherex Taiwan City, Taiwan, and Akron, Ohio that produce a wide variety of fasteners.

Manufacturing Manufacturing Facilities Facilities & Quality Manufacturing Assurance Facilities & Quality Assurance

Sherex Akron

Sherex Taiwan

Any manufacturing that uses thin materials Any manufacturing that uses thin materials Any manufacturing that uses thin materials Sherex Akron manufactures MS/NAS Sherex Taiwan Sherex Taiwan manufactures specializes inhigh using cold Sherex manufactures MS/NAS SherexAkron Akron manufactures MS/NAS fasteners and other specialty parts on a Sherex Taiwan specializes in using cold volume standard and to custom fasteners forming technology produce rivet fasteners and other specialty parts using using fasteners and other specialty parts variety of cold forming, tapping, and CNC forming technology to producetapping rivet utilizing cold forming nuts, clinch nuts, andmachines, specialty designs cold forming and machining cold forming and machining technologies. and Davenport screw machines. Small nuts,Taiwan clinch nuts, andmachines, specialty designs machines, CNC screw Sherex Akron manufactures MS/NAS Sherex specializes in usingauto cold in a high volume production technologies. Our small batch Our small batch production capabilities batch production capability allows us to in a high volume production lathes, and optical machines. fasteners and capabilities other specialty partsus using forming technology to produce rivet of environment. We sorting are also capable production allow to and allow us to offer reduced lead times assist customers with prototyping and environment. We are also capable of cold forming and machining technologies. nuts, clinch nuts, designs machining partsand for specialty production and offer reduced lead times and low low minimum order quantities. Cage research and development projects, and to parts for production and Our small batch production capabilities in amachining high volume production application development. minimum order quantities. Codes 7EK30 and 4JQL4. offer reduced lead times and low minimum application development. allow us to offer reduced lead times and environment. We are also capable of Cage Codes 7EK30 and 4JQL4. order quantities. Cage Codes 7EK30 low minimum order quantities. Cage and machining parts for production and QSLM approved by the U.S. Defense 4JQL4.7EK30 and 4JQL4. Codes application development. and Logistics Agency. UnsurpassedQUALITY Quality UNSURPASSED EachSherex Sherex manufacturing manufacturing facility a team of Each facilityisisled ledbyby engineering professionals charged with ensuring Unsurpassed Quality a seasoned team of seasoned engineering professionals allSherex products meet stringent quality requirements. charged with ensuring allfacility products meet stringent Each manufacturing is led by a team ofOur facilities are certified toOur AS9100, ISO are 9001:2008, ISO 14001, quality requirements. facilities certified seasoned engineering professionals charged with ensuring ISO/TS 16949, and ISO 17025. The Sherex Quality to AS9100, ISO 9001:2015, ISO 14001, IATF all products meet stringent quality requirements. Our Management System, and ourISO use ofSherex SPC (Statistical 16949:2016, and ISO 17025. The Quality facilities are certified to AS9100, 9001:2008, ISO 14001, Process Control) ensures that all of our products are Management System, and our of SPC (Statistical ISO/TS 16949, and ISO 17025. Theuse Sherex Quality manufactured using reliable, repeatable, and compliant Process Control) ensures all of our products Management System, and ourthat use of SPC (Statistical processes. are manufactured using reliable, repeatable, and Process Control) ensures that all of our products are We also use tensile testing, accelerated corrosion salt spray compliant processes. manufactured using reliable, repeatable, and compliant testing machines, torque testing, standard measurement processes. gauging equipment, andaccelerated opticalcorrosion sorting machines We also tensile testing, corrosion Weand also useuse tensile testing, accelerated salt sprayto ensure world class product quality. Please contact us for salt spray testing machines, testing, standard testing machines, torque testing,torque standard measurement more information on our quality processes. measurement and gauging equipment, optical and gauging equipment, and optical sorting and machines to sorting machines to ensure world class product ensure world class product quality. Please contact us for quality. Please contact us for more information on more information on our quality processes. our quality certifications and processes.

Phone: 866-474-3739 • Fax: 716-875-0358 • www.sherex.com • E-mail: info@sherex.com • IATF Sherex Fastening Solutions • Phone: 866-474-3739 • Fax: 716-875-0358 • www.sherex.com • E-mail: info@sherex.com 16949:2016

Sherex Fastening Solutions

•

Phone: 866-474-3739

Sherex Fastening Solutions

•

Fax: 716-875-0358

866-474-3739

•

www.sherex.com

•

E-mail: info@sherex.com

info@sherex.com

RIVET NUT INTRODUCTION

Rivet Nut Introduction

Blind Rivet Nuts provide load-bearing threads in thin sheet materials that are too thin for a tapped thread. They are called “blind” because they can be installed from one side of the work Once theload-bearing rivet nut is installed, components can Blind Rivetpiece. Nuts provide threads additional in thin sheet materials thatusing are too thin for a tapped be attached threaded fasteners.

thread. Blind Rivet Nuts also are used when an application has little or no access to the backside as they can be installed from the front side of the work piece. Screw

Attached Component Base Material

Rivet Nut

Advantages of Rivet Nuts Rivet Nuts provide a strong thread in thin materials that cannot be tapped. advantages of rivet nuts Rivet Nuts can be installed from one side of the work piece, also known as a “Blind Application.”

Rivet Nuts great whenthread easy disassembly andthat reassembly products is required. • work Provide a strong in thin materials cannot beoftapped. Canbe beinstalled installed in from onedifferent side of the workofpiece as a “Blind Application.” Rivet nuts• can many kinds material including steel, plastic and fiberglass. • Are easyadditional disassembly and reassembly products is required. Once Rivet Nutsideal are when installed components with of threaded fasteners can be attached. • Can be installed in many different kinds of material including steel, plastic and fiberglass.

Rivet Nuts do not need to be welded to the base material.

• Once Rivet Nuts are installed, additional components with threaded fasteners can be attached.

Prepainted material will not be damaged during the Rivet Nut installation process.

• Prepainted material will not be damaged during the Rivet Nut installation process.

Rivet Nuts are available in many different styles & materials for many different kinds of applications. • Rivet Nuts are available in many different styles & materials for many different types of applications.

Applications: Industries

• Ideal replacement for weld nuts: Rivet nuts are used in a variety of industries: • More efficient, simple installation Automotive HVAC Aerospace • Will not distort base material

Lighting

Electronics

Ag/Construction Equipment

Medical

Railways

• Eliminate weld spatter, toxic fumes, and other by-products of the welding process

Sherex Fastening Solutions

•

866-474-3739

•

www.sherex.com

•

info@sherex.com

RIVET NUT INTRODUCTION

Rivet nuts are used in a variety of industries: • Automotive • HVAC • Aerospace and Defense • Agricultural Equipment

• Construction Equipment • General Industrial • Electronics • Medical

• Railways • Heavy Truck • Solar • Wind Power

Any manufacturing that uses thin materials examples of rivet nut applications Some Example Include:

Rivet Nut Rivet Nut

After VehicleRetrofit Retrofit–-Tool ToolBox Box After Market Market Vehicle

Vehicle Side Rail Rail Vehicle Accessory Accessory –- Pickup Pickup Side

Rivet Nut

Appliance - Washer Tub Base Automotive – Light Assembly Rivet Nut Sherex Fastening Solutions

•

866-474-3739

Agricultural – Class 10.9 Structural Agriculture Equipment – High Strength Component Mounting Rivet Nut •

www.sherex.com

•

info@sherex.com

RIVET NUT INTRODUCTION Inch/Imperial Body Styles • Imperial/Inch body styles are designed to be placed in fractional or common inch drill/punch hole sizes. • They are the most common styles used in the American marketplace. • Most inch/imperial body styles are available with metric or inch threads. • Parts are manufactured by Sherex Taiwan, our IATF 16949:2016 and ISO 14001certified production facility, and Sherex Akron, our AS9100 and ISO 9001:2015 certified facility. • Special designs are available to meet customer specific requirements. Contact Sherex with your application information.

catalog attributes

- inch body style

Grip Range Material Thickness L Length HD Head Diameter HT Head Thickness D Diameter

D(A/F) IL LB ILB ITD

Diameter Across Flats Installed Length Length Closed End Installed Length Closed End Installed Thread Depth

Metric/European Body Styles • Metric European body styles are designed to be placed into metric drilled or punched holes. • Many metric body styles are available with metric or inch threads. • Products are manufactured in our IATF 16949:2016, AS9100, and ISO 9001:2015 certified production facility or in the EN 9100 certified production facility of our partner, Dejond, in Belgium. • Special designs are available to meet customer specific requirements. Contact Sherex with your application information.

catalog attributes

- metric body style

Grip Range(E) Material Thickness L Length D Head Diameter K Head Thickness Sherex Fastening Solutions

•

d Diameter d(A/F) Diameter Across Flats b Hole Size 866-474-3739

•

www.sherex.com

•

info@sherex.com

HEX BODY RIVET NUTS Hex body rivet nuts provide superior spin out resistance to round body rivet nuts. When a hex shaped hole can be produced, we recommend using one of our full hex or half hex rivet nut product lines: • Full Hex rivet nuts are ideal for heavy duty applications, and should be installed with hydro-pneumatic spin-pull tools • Half Hex rivet nuts are ideal for light duty applications, and can be installed using all Sherex tools full hex

- inch Body

Product Line

Head (Flange)

Hex

Small

✓

✓ ✓

FHK CFH

full hex

Closed End

Large

✓

FHL

Available

✓ ✓

Hex

✓

✓ ✓

Available Modifications

Head (Flange) Small

HUPO Tubtara®

✓

HUKO Tubtara®

✓ ✓

Large

Closed End

✓ ✓

- inch and metric Head (Flange)

Product Line Half Hex

HUKO METRIC Tubtara®

Sealed Head

✓ ✓ ✓

Body

HUPO METRIC Tubtara®

Class 8/Grade 5 Proof Load

✓ ✓

Product Line

CAH

Sealed End

- metric Body

half hex

Performance

Small

Large

Available Modifications Closed End

Sealed Head

✓

✓ ✓ ✓

✓ ✓

✓ ✓ ✓ ✓ ✓ ✓ ✓

Sherex Fastening Solutions

•

866-474-3739

•

www.sherex.com

•

info@sherex.com

FHK/FHL FULL HEX SMALL AND LARGE FLANGE SERIES FHK SERIES

• The FHK/FHL series provides increased spin out resistance over round body and half hex body rivet nuts. • Proven to meet Class 8 and Grade 5 thread strength. • Inch body • Inch and metric threads

• The FHK series has a small flange for a near flush installation.

FHL SERIES

fhk - small flange unified thread (unit - inches) Part Number Inch - Steel Part Number FHK2-2520-138 Inch - Steel FHK2-2520-236 FHK2-2520-138 FHK2-2520-335 FHK2-2520-236 FHK2-3118-157 FHK2-2520-335 FHK2-3118-276 FHK2-3118-157 FHK2-3118-394 FHK2-3118-276 FHK2-3716-177 FHK2-3118-394 FHK2-3716-295 FHK2-3716-177 FHK2-3716-413 FHK2-3716-295 FHK2-5013-177 FHK2-3716-413 FHK2-5013-177

FHK - SMALL FLANGE UNIFIED THREAD (UNITS - INCHES) Range L HD (A/F) HT (A/F) IL FHK - SMALLGrip FLANGE UNIFIED THREAD (UNITS - DINCHES) Thread Size

Thread Size 1/4-20 UNC 1/4-20 UNC 5/16-18 UNC 5/16-18 UNC 3/8-16 UNC 3/8-16 1/2-13 UNC UNC 1/2-13 UNC

± .015 L

± .010 ± .015* ± .025** ± .005 HD (A/F) HT± .008

DMax. (A/F)

Ref. IL

+.004/-.000 Hole Size (A/F)

.039 Min. .138 .039 .236 .138 .031 .236 .157 .031 .276 .157 .039 .276 .177 .039 .295 .177 .039 .295 .039

±.673 .015 .772 .673 .870 .772 .787 .870 .913 .787 1.039 .913 .955 1.039 1.053 .955 1.191 1.053 1.215 1.191 1.215

± .010 ± .015* ± .025** ± .005 ± .008

.138 Max. .236 .138 .335 .236 .157 .335 .276 .157 .394 .276 .177 .394 .295 .177 .413 .295 .177 .413 .177

.390

.016

Max. .354

Ref. .469

+.004/-.000 .354

.390

.016

.354

.469

.354

.457

.016

.432

.535

.433

.457

.016

.432

.535

.433

.559*

.025*

.511

.689

.512

.559* .734**

.025* .044*

.511 .656

.689 .866

.512 .656

.734**

.044*

.656

.866

FHK - SMALL FLANGE METRIC THREAD (UNITS - MILLIMETERS) IL FHK - SMALL FLANGE METRIC THREAD (UNITS - MILLIMETERS) Thread Size

Grip Range HD-(A/F) HT D (A/F) fhk - small flange metric thread L(unit millimeters ) Part Number Metric - Steel Part Number FHK2-610-3.5 Metric - Steel FHK2-610-6.0 FHK2-610-3.5 FHK2-610-8.5 FHK2-610-6.0 FHK2-8125-4.0 FHK2-610-8.5 FHK2-8125-7.0 FHK2-8125-4.0 FHK2-8125-10.0 FHK2-8125-7.0 FHK2-1015-4.5 FHK2-8125-10.0 FHK2-1015-7.5 FHK2-1015-4.5 FHK2-1015-10.5 FHK2-1015-7.5 FHK2-12175-4.5 FHK2-1015-10.5 FHK2-12175-4.5

Thread Size M6 X 1.0 ISO M6 X 1.0 ISO M8 X 1.25 ISO M8 X 1.25 ISO M10 X 1.5 ISO M10 XX 1.75 1.5 ISO M12 ISO M12 X 1.75 ISO

± L.38

± .25 ± .38* ± .64** HD (A/F)

± 0.13 ± 0.18* HT

DMax. (A/F)

Ref. IL

+.10/-.000 Hole Size (A/F)

1.0 Min. 3.5 1.0 6.0 3.5 0.8 6.0 4.0 0.8 7.0 4.0 1.0 7.0 4.5 1.0 7.5 4.5 1.0 7.5 1.0

17.10 ± .38 19.60 17.10 22.10 19.60 20.00 22.10 23.20 20.00 26.40 23.20 24.25 26.40 26.75 24.25 30.25 26.75 30.85 30.25 30.85

± .25 ± .38* ± .64**

± 0.13 ± 0.18*

Max. 8.98

Ref. 11.9

+.10/-.000 9.0

Grip Range

Grip Range .039 .138 Min. Max. .138 .236 .236 .335 .039 .138 .031 .157 .138 .236 .157 .276 .236 .335 .276 .394 .031 .157 .039 .177 .157 .276 .177 .295 .276 .394 .295 .413 .039 .177 Grip Range .177 .295 .295 .413 Min. Max. Grip Range .039 .177 Min. Max.

L .657 ± .756 .015

.854 .657 .771 .756 .897 .854 1.020 .771 .910 .897 1.010 1.020 1.140 .910 L 1.010 1.140 ± .015 L 1.181 ± .015

.039 .177 Grip Range

1.181 L

3.5 Max. 6.0 3.5 8.5 6.0 4.0 8.5 7.0 4.0 10.0 7.0 4.5 10.0 7.5 4.5 10.5 7.5 4.5 10.5 4.5

9.92

.44

9.92

.44

8.98

11.9

9.0

11.60

.41

10.98

13.6

11.0

11.60

.41

10.98

13.6

11.0

14.20*

.64*

12.98

17.5

13.0

14.20* 18.65**

.64* 1.12*

12.98 16.65

17.5 22.0

13.0 16.66

18.65**

1.12*

16.65

22.0

16.66

HD (A/F)

D (A/F)

Hole Size (A/F)

HD (A/F)

D (A/F)

+.004/-.000 Hole Size (A/F)

± .511 .014

± .059 .006

Max. .354

Ref. .469

+.004/-.000 .354

.511 .630

.059 .059

.354 .432

.469 .535

.354 .433

.630 .748

.059 .079

.432 .511

.535 .689

.433 .512

HD (A/F) .748 ± .025 HD (A/F) .959 ± .025

HT .079 ± .004 HT .085 ± .004

D (A/F) .511 Max. D (A/F) .656 Max.

IL .689 Ref. IL .866 Ref.

Hole Size (A/F) .512 +.010/-.000 Hole Size (A/F) .656 +.010/-.000

.959 HD (A/F)

.085 HT

.656 D (A/F)

.866 IL

.656 Hole Size (A/F)

+.10/-.000 Hole Size (A/F)

Ref. 11.9

+.10/-.000 9.0

11.9 13.6

9.0 11.0

13.6 17.5

11.0 13.0

17.5 IL

13.0 Hole Size (A/F)

Ref. IL 22.0 Ref.

+.25/-.000 Hole Size (A/F) 16.66 +.25/-.000

22.0

16.66

fhk - small flange metric thread fhl large Thread unified thread (unit unit--millimeters inches) ) Part Number Size Inch - Steel

FHL - LARGE THREAD (UNITS - INCHES) Min. FLANGE Max. UNIFIED ± .015 ± .014 ± .006 Max. Ref.

5/16-18 UNC 3/8-16 UNC

LRGH2-5013-177

1/2-13 UNC

Thread Size 1/4-20 UNC 1/4-20 UNC 5/16-18 UNC

3/8-16 UNC Thread Size 1/2-13 UNC Thread Size

fhl - largeFHL flange metric thread - millimeters ) - LARGE FLANGE METRIC(unit THREAD (UNITS - MILLIMETERS) Part Number Metric - Steel

• The FHL series has a large flange to provide increased strength in punched and drilled holes.

FHL2-610-3.5 Part Number FHL2-610-6.0 Metric - Steel FHL2-610-8.5 FHL2-610-3.5 FHL2-8125-4.0 FHL2-610-6.0 FHL2-8125-7.0 FHL2-610-8.5 FHL2-8125-10.0 FHL2-8125-4.0 FHL2-1015-4.5 FHL2-8125-7.0 FHL2-1015-7.5 FHL2-8125-10.0 FHL2-1015-10.5 FHL2-1015-4.5 FHL2-1015-7.5 FHL2-1015-10.5 Part Number Metric - Steel LRGH2-12175-4.5 Part Number Metric - Steel LRGH2-12175-4.5

Thread Size FHL - LARGE FLANGE METRIC THREAD Min. Max. ± .38 ± .35 (UNITS ± .15 - MILLIMETERS) Max. Ref. Grip Range L HD (A/F) HT D (A/F) 1.0 3.5 16.70 Thread Size Min. Max. ± .38 ± .35 ±1.50 .15 Max. M6 X 1.0 ISO 13.00 8.98 3.5 6.0 19.20 6.0 8.5 21.70 1.0 3.5 16.70 0.8 4.0 19.60 M6 X 1.0 ISO 13.00 1.50 8.98 3.5 6.0 19.20 M8 X 1.25 ISO 16.00 1.50 10.98 4.0 7.0 22.80 6.0 8.5 21.70 7.0 10.0 26.00 0.8 4.0 19.60 1.0 4.5 23.10 M8 X 1.25 ISO 16.00 1.50 10.98 4.0 7.0 22.80 M10 X 1.5 ISO 19.00 2.00 12.98 4.5 7.5 25.60 7.0 10.0 26.00 7.5 10.5 29.10 1.0 4.5 23.10 M10 X 1.5 ISO 19.00 2.00 12.98 4.5 7.5 25.60 Grip Range L HD (A/F) HT D (A/F) 7.5 10.5 29.10 Material: Steel 1008/1010 Thread Size Min. Finishes: Max. .38 trivalent±chromate .64 .10 SFS-01-001 Max. RoHS Compliant Zinc plated –± clear per±Sherex Grip Range L HD (A/F) HT D (A/F) M12 X 1.75 ISO 24.36 2.16 16.65 1.0 4.5 30.00 Thread Size Sherex rivet nuts are compatible with Min. full hex Max. ± .38 ± the .64 following±hardware: .10 Max. GRADE 2, GRADE 5, CLASS 8.8 and CLASS 9.8 Please contact Sherex when using other grade fasteners. M12 X 1.75 ISO 24.36 2.16 16.65 1.0 4.5 30.00

*Mechanical lock feature is available on all Full Hex parts. Please contact Sherex for details. Mating material holes must be smaller than flange diameter.

.656 Hole Size (A/F)

Min. Max. Grip Range

FHL - LARGE FLANGE UNIFIED THREAD (UNITS - INCHES)

FHL2-2520-138 Part Number FHL2-2520-236 Inch - Steel FHL2-2520-335 FHL2-2520-138 FHL2-3118-157 FHL2-2520-236 FHL2-3118-276 FHL2-2520-335 FHL2-3118-394 FHL2-3118-157 FHL2-3716-177 FHL2-3118-276 FHL2-3716-295 FHL2-3118-394 FHL2-3716-413 FHL2-3716-177 SHEREX FHL2-3716-295 Part Number FHL2-3716-413 Inch - Steel SHEREX LRGH2-5013-177 Part Number Inch - Steel

Hole Size (A/F)

Min. Max. Grip Range

Sherex Fastening Solutions

•

866-474-3739

•

www.sherex.com

•

info@sherex.com

CFH & CFHD FULL HEX BODY SERIES CFH SERIES

CFHD SERIES

cfh unified thread (unit Part Number Number Part Part Number CFH2-1024-085♦♦ CFH2-1024-085 CFH2-1024-085♦ CFH2-1024-135♦♦ CFH2-1024-135 CFH2-1024-135♦ CFH2-1024-185♦♦ CFH2-1024-185 CFH2-1024-185♦ CFH2-1032-085♦♦ CFH2-1032-085 CFH2-1032-085♦ CFH2-1032-135♦♦ CFH2-1032-135 CFH2-1032-135♦ CFH2-1032-185♦♦ CFH2-1032-185 CFH2-1032-185♦ CFH2-2520-085 CFH2-2520-085 CFH2-2520-085 CFH2-2520-145 CFH2-2520-145 CFH2-2520-145 CFH2-2520-205♦♦ CFH2-2520-205 CFH2-2520-205♦ CFH2-3118-105 CFH2-3118-105 CFH2-3118-105 CFH2-3118-175 CFH2-3118-175 CFH2-3118-175 CFH2-3118-245♦♦ CFH2-3118-245 CFH2-3118-245♦ CFH2-3716-115♦♦ CFH2-3716-115 CFH2-3716-115♦ CFH2-3716-205♦♦ CFH2-3716-205 CFH2-3716-205♦ CFH2-3716-295♦♦ CFH2-3716-295 CFH2-3716-295♦

Thread Size Size Thread Thread Size 10-24 UNC UNC 10-24 10-24 UNC 10-24 UNC UNC 10-24 10-24 UNC 10-24 UNC UNC 10-24 10-24 UNC 10-32 UNF UNF 10-32 10-32 UNF 10-32 UNF UNF 10-32 10-32 UNF 10-32 UNF UNF 10-32 10-32 UNF 1/4-20 UNC UNC 1/4-20 1/4-20 UNC 1/4-20 UNC UNC 1/4-20 1/4-20 UNC 1/4-20 UNC UNC 1/4-20 1/4-20 UNC 5/16-18 UNC UNC 5/16-18 5/16-18 UNC 5/16-18 UNC UNC 5/16-18 5/16-18 UNC 5/16-18 UNC UNC 5/16-18 5/16-18 UNC 3/8-16 UNC UNC 3/8-16 3/8-16 UNC 3/8-16 UNC UNC 3/8-16 3/8-16 UNC 3/8-16 UNC UNC 3/8-16 3/8-16 UNC

Grip Range Range Grip Grip Range Min. Max. Min. Max. Min. Max. .010 .085 .010 .085 .010 .085 .085 .135 .085 .135 .085 .135 .135 .185 .135 .185 .135 .185 .010 .085 .010 .085 .010 .085 .085 .135 .085 .135 .085 .135 .135 .185 .135 .185 .135 .185 .020 .085 .020 .085 .020 .085 .085 .145 .085 .145 .085 .145 .145 .205 .145 .205 .145 .205 .030 .105 .030 .105 .030 .105 .105 .175 .105 .175 .105 .175 .175 .245 .175 .245 .175 .245 .030 .115 .030 .115 .030 .115 .115 .205 .115 .205 .115 .205 .205 .295 .205 .295 .205 .295

cfh metric thread (unit Part Number Number Part Part Number CFH2-580-2.1♦♦ CFH2-580-2.1 CFH2-580-2.1♦ CFH2-580-3.5♦♦ CFH2-580-3.5 CFH2-580-3.5♦ CFH2-580-5.0♦♦ CFH2-580-5.0 CFH2-580-5.0♦ CFH2-610-2.1♦♦ CFH2-610-2.1 CFH2-610-2.1♦ CFH2-610-3.6♦♦ CFH2-610-3.6 CFH2-610-3.6♦ CFH2-610-5.2♦♦ CFH2-610-5.2 CFH2-610-5.2♦ CFH2-8125-2.5♦♦ CFH2-8125-2.5 CFH2-8125-2.5♦ CFH2-8125-4.5♦♦ CFH2-8125-4.5 CFH2-8125-4.5♦ CFH2-8125-6.6♦♦ CFH2-8125-6.6 CFH2-8125-6.6♦ CFH2-1015-2.9♦♦ CFH2-1015-2.9 CFH2-1015-2.9♦ CFH2-1015-5.2♦♦ CFH2-1015-5.2 CFH2-1015-5.2♦ CFH2-1015-7.5♦♦ CFH2-1015-7.5 CFH2-1015-7.5♦

Thread Size Size Thread Thread Size M5x0.8 ISO ISO M5x0.8 M5x0.8 ISO M5x0.8 ISO ISO M5x0.8 M5x0.8 ISO M5x0.8 ISO ISO M5x0.8 M5x0.8 ISO M6x1.0 ISO ISO M6x1.0 M6x1.0 ISO M6x1.0 ISO ISO M6x1.0 M6x1.0 ISO M6x1.0 ISO ISO M6x1.0 M6x1.0 ISO M8x1.25 ISO ISO M8x1.25 M8x1.25 ISO M8x1.25 ISO ISO M8x1.25 M8x1.25 ISO M8x1.25 ISO ISO M8x1.25 M8x1.25 ISO M10x1.50 ISO ISO M10x1.50 M10x1.50 ISO M10x1.50 ISO ISO M10x1.50 M10x1.50 ISO M10x1.50 ISO ISO M10x1.50 M10x1.50 ISO

- inches) LL L ± .015 .015 ± ± .015 .344 .344 .344 .406 .406 .406 .453 .453 .453 .344 .344 .344 .406 .406 .406 .453 .453 .453 .406 .406 .406 .469 .469 .469 .531 .531 .531 .562 .562 .562 .640 .640 .640 .703 .703 .703 .625 .625 .625 .718 .718 .718 .812 .812 .812

- millimeters)

Grip Range Range Grip Grip Range Min. Max. Max. Min. Min. Max. 0.50 2.15 2.15 0.50 0.50 2.15 2.15 3.55 3.55 2.15 2.15 3.55 3.55 5.05 5.05 3.55 3.55 5.05 0.50 2.15 2.15 0.50 0.50 2.15 2.15 3.65 3.65 2.15 2.15 3.65 3.65 5.20 5.20 3.65 3.65 5.20 0.50 2.55 2.55 0.50 0.50 2.55 2.50 4.55 4.55 2.50 2.50 4.55 4.55 6.60 4.55 6.60 4.55 6.60 0.75 2.95 0.75 2.95 0.75 2.95 2.95 5.20 5.20 2.95 2.95 5.20 5.20 7.50 5.20 7.50 5.20 7.50

cfhd unified thread (unit Thread Size Size Thread Part Number Number Part Thread Size Part Number CFHD2-2520-080♦♦ 1/4-20 1/4-20 UNC UNC CFHD2-2520-080 CFHD2-2520-080♦ 1/4-20 UNC CFHD2-2520-150♦♦ 1/4-20 1/4-20 UNC UNC CFHD2-2520-150 CFHD2-2520-150♦ 1/4-20 UNC CFHD2-3118-100♦♦ 5/16-18 5/16-18 UNC UNC CFHD2-3118-100 CFHD2-3118-100♦ 5/16-18 UNC CFHD2-3118-180♦♦ 5/16-18 5/16-18 UNC UNC CFHD2-3118-180 CFHD2-3118-180♦ 5/16-18 UNC CFHD2-3716-125♦♦ 3/8-16 3/8-16 UNC UNC CFHD2-3716-125 CFHD2-3716-125♦ 3/8-16 UNC CFHD2-3716-230♦♦ 3/8-16 3/8-16 UNC UNC CFHD2-3716-230 CFHD2-3716-230♦ 3/8-16 UNC

HD HD Min. HDMax. Max. Min. Min. Max. .329 .359 .359 .329 .329 .359 .329 .359 .359 .329 .329 .359 .329 .359 .359 .329 .329 .359 .329 .359 .359 .329 .329 .359 .329 .359 .359 .329 .329 .359 .329 .359 .359 .329 .329 .359 .422 .452 .452 .422 .422 .452 .422 .452 .452 .422 .422 .452 .422 .452 .452 .422 .422 .452 .547 .577 .577 .547 .547 .577 .547 .577 .577 .547 .547 .577 .547 .577 .577 .547 .547 .577 .641 .671 .671 .641 .641 .671 .641 .671 .671 .641 .641 .671 .641 .671 .671 .641 .641 .671

Grip Range Range Grip Grip Range Min. Max. Max. Min. Min. Max. .020 .080 .080 .020 .020 .080 .080 .150 .150 .080 .080 .150 .020 .100 .100 .020 .020 .100 .100 .180 .180 .100 .100 .180 .020 .125 .125 .020 .020 .125 .125 .230 .230 .125 .125 .230

HD HD LL L HD Min. Max. Max. ± ± .38 .38 Min. Min. Max. ± .38 9.14 9.90 9.90 10.30 10.30 9.14 9.14 9.90 10.30 9.14 9.90 9.90 11.90 11.90 9.14 9.14 9.90 11.90 9.14 9.90 9.90 13.48 13.48 9.14 9.14 9.90 13.48 10.71 11.47 11.47 10.30 10.30 10.71 10.71 11.47 10.30 10.71 11.47 11.47 11.90 11.90 10.71 10.71 11.47 11.90 10.71 11.47 11.47 13.48 13.48 10.71 10.71 11.47 13.48 14.69 15.45 15.45 15.86 15.86 14.69 14.69 15.45 15.86 14.69 15.45 15.45 17.84 17.84 14.69 14.69 15.45 17.84 14.69 15.45 15.45 19.82 19.82 14.69 14.69 15.45 19.82 17.10 17.86 17.86 15.88 15.88 17.10 17.10 17.86 15.88 17.10 17.86 17.86 18.24 18.24 17.10 17.10 17.86 18.24 17.10 17.86 17.86 20.62 20.62 17.10 17.10 17.86 20.62

D (A/F) (A/F) IL HT D IL HT (A/F) Ref. HT DMax. IL Nom. Max. Nom. Ref. Nom. Max. Ref. .043 .223 .200 .200 .043 .223 .043 .223 .200 .043 .223 .210 .210 .043 .223 .043 .223 .210 .043 .223 .210 .210 .043 .223 .043 .223 .210 .043 .223 .200 .200 .043 .223 .043 .223 .200 .043 .223 .210 .210 .043 .223 .043 .223 .210 .043 .223 .210 .210 .043 .223 .043 .223 .210 .043 .296 .250 .250 .043 .296 .043 .296 .250 .043 .296 .250 .250 .043 .296 .043 .296 .250 .043 .296 .250 .250 .043 .296 .043 .296 .250 .048 .368 .375 .375 .048 .368 .048 .368 .375 .048 .368 .380 .380 .048 .368 .048 .368 .380 .048 .368 .375 .375 .048 .368 .048 .368 .375 .058 .437 .400 .400 .058 .437 .058 .437 .400 .058 .437 .405 .405 .058 .437 .058 .437 .405 .058 .437 .410 .410 .058 .437 .058 .437 .410

(A/F) Hole Size Size (A/F) Hole Hole Size (A/F)

+.005/-.000 +.005/-.000 +.005/-.000 .224 .224 .224 .224 .224 .224 .224 .224 .224 .224 .224 .224 .224 .224 .224 .224 .224 .224 .297 .297 .297 .297 .297 .297 .297 .297 .297 .369 .369 .369 .369 .369 .369 .369 .369 .369 .438 .438 .438 .438 .438 .438 .438 .438 .438

Material: Steel 1008/1010 Stainless Steel 302 Aluminum 5056

RoHS Compliant Finishes: Zinc Plated-Yellow Trivalent Chromate per Sherex SFS-01-001, SC2 Zinc Plated-Clear Trivalent Chromate per Sherex SFS-01-001

• Inch body • Inch and metric threads

(A/F) Hole Size Size (A/F) D (A/F) (A/F) IL HT D IL Hole HT HT D (A/F) IL Hole Size (A/F) Nom. Max. Max. Ref. Ref. +.13/-.000 Nom. +.13/-.000 Nom. Max. Ref. +.13/-.000 1.09 6.35 6.35 6.72 6.72 6.35 1.09 6.35 1.09 6.35 6.72 6.35 1.09 6.35 6.35 6.72 6.72 6.35 1.09 6.35 1.09 6.35 6.72 6.35 1.09 6.35 6.35 6.72 6.72 6.35 1.09 6.35 1.09 6.35 6.72 6.35 1.09 7.51 6.22 6.22 7.51 1.09 7.51 7.51 1.09 7.51 6.22 7.51 1.09 7.51 6.22 6.22 7.51 1.09 7.51 7.51 1.09 7.51 6.22 7.51 1.09 7.51 6.22 6.22 7.51 1.09 7.51 7.51 1.09 7.51 6.22 7.51 1.57 10.08 10.08 10.35 10.35 10.08 1.57 10.08 1.57 10.08 10.35 10.08 1.57 10.08 10.08 10.35 10.35 10.08 1.57 10.08 1.57 10.08 10.35 10.08 1.57 10.08 10.08 10.35 10.35 10.08 1.57 10.08 1.57 10.08 10.35 10.08 1.57 11.89 11.89 13.08 13.08 11.89 1.57 11.89 1.57 11.89 13.08 11.89 1.57 11.89 11.89 13.08 13.08 11.89 1.57 11.89 1.57 11.89 13.08 11.89 1.57 11.89 11.89 13.08 13.08 11.89 1.57 11.89 1.57 11.89 13.08 11.89

- inches) HD HD HD Min. Max. Max. Min. Min. Max. .454 .484 .484 .454 .454 .484 .454 .484 .484 .454 .454 .484 .579 .609 .609 .579 .579 .609 .579 .609 .609 .579 .579 .609 .673 .703 .703 .673 .673 .703 .673 .703 .703 .673 .673 .703

LL L ± .015 .015 ± ± .015 .500 .500 .500 .578 .578 .578 .625 .625 .625 .703 .703 .703 .703 .703 .703 .812 .812 .812

D (A/F) (A/F) IL HT D IL HT HT D (A/F) IL Nom. Max. Max. Ref. Ref. Nom. Nom. Max. Ref. .058 .312 .312 .340 .340 .058 .058 .312 .340 .058 .312 .312 .345 .345 .058 .058 .312 .345 .062 .397 .397 .405 .405 .062 .062 .397 .405 .062 .397 .397 .405 .405 .062 .062 .397 .405 .088 .468 .468 .450 .450 .088 .088 .468 .450 .088 .468 .468 .450 .450 .088 .088 .468 .450

(A/F) Hole Size Size (A/F) Hole Hole Size (A/F)

+.010/-.000 +.010/-.000 +.010/-.000 .312 .312 .312 .312 .312 .312 .397 .397 .397 .397 .397 .397 .468 .468 .468 .468 .468 .468

part numbering system CFH/CFHD Specifications

• The CFH series offers a full hexagonal body for exceptional spin out resistance.

Part Number Example: CFH2-2520-085 CFH Full Hex Heavy Duty Large Flange CFHD - High Strength

2 2520 (_) 085 T Material Thread Size Grip Range Empty-Open End Clear Trivalent 1-Stainless Steel B-Closed End 2-Steel 3-Aluminum

• The CFHD series offers the same benefits as the CFH series but with higher strength. • Inch body • Inch threads

Special finish or material available upon request

♦ Non-Standard Part: Minimum order quantity required after depletion of stock. Please contact Sherex for current availability. Sherex rivet nuts are compatible with the following hardware: GRADE 2, GRADE 5, CLASS 8.8 and CLASS 9.8 Please contact Sherex when using other grade fasteners.

Sherex Fastening Solutions

•

866-474-3739

•

www.sherex.com

•

info@sherex.com

LARGE SIZE FULL HEX SERIES Part Number Inch - Steel

LRGR2-5013-150 Part Number Inch - Steel LRGR2-6211-200

LRGR SERIES - ROUND BODY

Grip Range Thread SizeLRGR SERIES Min. Max. Grip Range 1/2-13 .050 .150 Size ThreadUNC Min. Max. 5/8-11 UNC .080 .200 3/4-10 .048 .250 1/2-13 UNC UNC .050 .150

LRGR2-7510-250 LRGR2-5013-150♦ LRGR2-6211-200 LRGR2-7510-250♦ Part Number Metric - Steel

5/8-11 UNC 3/4-10 UNC Thread Size

LRGR2-12175-3.8 Part Number Metric - Steel ♦ LRGR2-1620-5.0

M12x1.75 ISO Thread Size M16x2.0 ISO

Hole Size

D .656 Max. .826 .906 .656

Ref. IL .984 Ref. 1.142 .878 .984

+.010/-.000 Hole Size .656 +.010/-.000 .827 .907 .656

.080 .200 Grip Range .048 .250

L HD HT 1.260 .945 .085 ± .015 ± .025 ± .004 1.428 1.181 .098 1.210 .118 1.260 1.235 .945 .085 1.428 1.181 .098 L HD HT 1.210 1.235 .118

.826 D .906

1.142 IL .878

.827 Hole Size .907

Min. Max. Grip Range 1.27 3.80 Min. Max. 2.00 5.00

± .38 L 32.00 ± .38 36.27

Max. D 16.65 Max. 20.98

Ref. IL 25.00 Ref. 29.00

+.25/-.000 Hole Size 16.66 +.25/-.000 21.00

-± .015 ROUND BODY ± .025 ± .004 Max.

± .64 HD 24.00 ± .64 30.00

± .10 HT 2.16 ± .10 2.50

LRGR2-12175-3.8 M12x1.75 ISO 1.27 3.80 32.00 24.00 2.16 16.65 25.00 LRGR2-1620-5.0♦ M16x2.0 ISO 2.00 5.00 36.27 30.00 2.50 20.98 29.00 lrgh series - fullLRGH hex body unified thread (unit - inches) SERIES - FULL HEX BODY Part Number Inch - Steel LRGH2-5013-177 Part Number Inch - Steel LRGH2-6211-200

• The LRGH series has a large flange for increased performance • Large diameters for heavy duty applications

Grip Range Thread Size LRGHMin.SERIES Max. Grip Range 1/2-13 .040 .177 Size ThreadUNC Min. Max. 5/8-11 UNC .080 .200

D (A/F)

- ±FULL HEX BODY .015 ± .025 ± .004 Max.

L HD HT D (A/F) 1.181 .959 .085 .656 ± .015 ± .025 ± .004 Max. 1.260 1.260 .118 .826

16.66 21.00

Hole Size (A/F)

Ref. IL .866 Ref. .965

+.010/-.000 Hole Size (A/F) .656 +.010/-.000 .827

LRGH2-5013-177 1/2-13 UNC .040 .177 1.181 .959 .085 .656 .866 .656 L HD Grip Range HT D .826 (A/F) .965 IL Hole Size LRGH2-6211-200 5/8-11 UNC .080 .200 1.260 1.260 .118 .827 (A/F) lrgh series Thread - full Part Number Sizehex metric thread (unit - millimeters) Min. Max. ± .38 ± .64 ± .10 Max. Ref. +.25/-. 000 Metric - Steel L Grip Range HD HT D (A/F) IL Hole Size (A/F) LRGH2-12175-4.5 Part Number Metric - Steel LRGH2-1620-5.0

M12x1.75 ISO Thread Size M16x2.0 ISO

1.00 Min. 2.00

4.50 Max. 5.00

30.00 ± .38 32.00

24.36 ± .64 32.00

2.16 ± .10 3.00

16.65 Max. 20.98

22.00 Ref. 24.50

16.66 +.25/-. 000 21.00

LRGH2-12175-4.5 LRGH2-1620-5.0

M12x1.75 ISO M16x2.0 ISO

1.00 2.00

4.50 5.00

30.00 32.00

24.36 32.00

2.16 3.00

16.65 20.98

22.00 24.50

16.66 21.00

• Inch body • Inch and metric threads

application examples

Utility Pole

Hex Nut

Utility Pole Attachments

3/4” Round STEP-NUT™

3/4” Step Bolt

Bracket Bolt

Truck Frame Attachments

Truck Frame

5/8” Full Hex Rivet Nut

Material: Steel C1010/C1022 RoHS Compliant Finishes: Zinc plated – clear trivalent chromate per Sherex SFS-01-001 Sherex full hex rivet nuts are compatible with the following hardware: GRADE 2, GRADE 5, CLASS 8.8 and CLASS 9.8 Please contact Sherex when using other grade fasteners. *Mechanical lock feature is available on all Full Hex parts. Please contact Sherex for details.

Sherex Fastening Solutions

•

866-474-3739

•

www.sherex.com

•

info@sherex.com

HUPO LARGE FLANGE AND HUKO SMALL FLANGE HEX METRIC SERIES HUPO SERIES

HUKO SERIES

hupo metric thread (unit Part Number

Thread Size

Part Steel Number Steel TU-SM4HUPO20ZT TU-SM5HUPO30ZT TU-SM4HUPO20ZT TU-SM6HUPO30ZT TU-SM5HUPO30ZT TU-SM6HUPO55ZT TU-SM6HUPO30ZT TU-SM8HUPO30ZT TU-SM6HUPO55ZT TU-SM8HUPO55ZT TU-SM8HUPO30ZT TU-SM8HUPO80ZT TU-SM8HUPO55ZT TU-SM10HSPO35ZT TU-SM8HUPO80ZT TU-SM10HSPO60ZT TU-SM10HSPO35ZT TU-SM12HUPO40ZT TU-SM10HSPO60ZT

Thread Size M4X0.7 ISO M5X0.8ISO ISO M4X0.7 M6X1.0ISO ISO M5X0.8 M6X1.0ISO ISO M6X1.0 M8X1.25ISO ISO M6X1.0 M8X1.25ISO ISO M8X1.25 M8X1.25ISO ISO M8X1.25 M10X1.5ISO ISO M8X1.25 M10X1.5ISO ISO M10X1.5 M12X1.75ISO ISO M10X1.5

TU-SM12HUPO40ZT

M12X1.75 ISO

- millimeters)

Grip Range (E) Min.RangeMax. Grip (E)

L ± L0.35

D ± D0.35

K ± K0.15

Thread Size

Thread Size M4X0.7 ISO M5X0.8ISO ISO M4X0.7 M5X0.8ISO ISO M5X0.8 M6X1.0ISO ISO M5X0.8 M6X1.0ISO ISO M6X1.0 M8X1.25ISO ISO M6X1.0 M8X1.25ISO ISO M8X1.25 M10X1.5ISO ISO M8X1.25

Hole Size (b+0.1) Hole Size (b+0.1) 6.0 7.0 6.0

Min. 0.5 0.5 0.5 0.5 0.5 3.0 0.5 0.5 3.0 3.0 0.5 5.5 3.0 0.8 5.5 3.5 0.8 1.0 3.5

Max. 2.0 3.0 2.0 3.0 3.0 5.5 3.0 3.0 5.5 5.5 3.0 8.0 5.5 3.5 8.0 6.0 3.5 4.0 6.0

± 10.0 0.35 13.0 10.0 14.5 13.0 16.5 14.5 16.5 16.5 19.0 16.5 22.0 19.0 21.0 22.0 23.5 21.0 25.0 23.5

± 0.35 9.0 10.0 9.0

19.0

2.0

13.0

19.0 23.0

2.0 2.0

13.0 16.0

1.0

4.0

25.0

23.0

2.0

16.0

± 0.15 1.0 1.0 1.0

10.0 13.0

1.0 1.5

7.0 9.0

13.0

1.5

9.0

16.0

1.5

16.0

Min.RangeMax. Grip (E) Min. 0.5 0.5 0.5 3.0 0.5 0.5 3.0 3.0 0.5 0.5 3.0 3.0 0.5 0.8 3.0

Max. 2.0 3.0 2.0 5.5 3.0 3.0 5.5 5.5 3.0 3.0 5.5 5.5 3.0 3.5 5.5

± L0.35 ± 11.0 0.35 14.0 11.0 16.5 14.0 16.0 16.5 18.5 16.0 18.0 18.5 20.5 18.0 23.0 20.5

11.0

1.5

huko metric threadGrip - millimeters (unit Range (E) Part Number L D ) Part Steel Number Steel TU-SM4HUKO20ZT TU-SM5HUKO30ZT TU-SM4HUKO20ZT TU-SM5HUKO55ZT TU-SM5HUKO30ZT TU-SM6HUKO30ZT TU-SM5HUKO55ZT TU-SM6HUKO55ZT TU-SM6HUKO30ZT TU-SM8HUKO30ZT TU-SM6HUKO55ZT TU-SM8HUKO55ZT TU-SM8HUKO30ZT TU-SM10HUKO35ZT TU-SM8HUKO55ZT

d (A/F) -0.02/-0.15 d (A/F) -0.02/-0.15 6.0 7.0 6.0

K +0.3/-0.05 K

11.0

d (A/F) -0.02/-0.15 d (A/F)

11.0 11.0

Hole Size (b+0.1) Hole Size

+0.3/-0.15 D +0.3/-0.15 6.6

+0.3/-0.05 0.6

-0.02/-0.15 6.0

(b+0.1) 6.0

6.6 7.7

0.6 0.6

6.0 7.0

7.7 9.8

0.6 0.7

7.0 9.0

9.8 11.8

0.7 0.7

9.0 11.0

11.8 13.8

0.7 0.7

11.0 13.0

TU-SM10HUKO35ZT M10X1.5 ISO 0.8 3.5 23.0 13.8 0.7 13.0 13.0 Material: Steel QST 34-3 Material: Stainless 304 Cu part numbering system Steel QST Steel 34-3 StainlessSteel Steel304 316Cu Cu **All Stainless Steel are Semi-Hexagonal Stainless Part Number HUPO/HUKO Specifications Stainless Steel 316 Cu **All Stainless Steel are Semi-Hexagonal Example: TU-SM5HUPO30ZT RoHs Compliant Finish: Zinc Top, 96 w / 480 r Material: RoHs Compliant Finish: M5 S HUP O 30 Steel QST 34-3 TU ZT Zinc Top, 96 w / 480 r Thread Size Product Type O-Open End Grip Range Zinktop (Clear) Stainless Steel 304 Cu Product Style Material S-Steel Large Flange X-Closed End Stainless Steel 316 Cu Metric SS-304 Stainless Steel Flat Head Hexagonal Shank RoHs Compliant Finish: Metric Body Zinktop (Clear), 96 w / 480 r *Semi-Hexagonal Shank Part Number Example: TU-SM5HUKO30ZT M5 S Thread Size Material S-Steel SS-304 Stainless Steel

TU Product Style Metric Special finish or material available upon request All Stainless Steel parts are semi-hexagonal shank.

HUK O 30 ZT Product Type O-Open End Grip Range Zinktop (Clear) Small Flange X-Closed End Round Body Hexagonal Shank Metric Body

• The HUPO series has a large flange that provides increased strength. • Metric body and metric threads

• The HUKO series has a smaller flange that gives a near flush installation into the parent material. • Metric body and metric threads

Grip Range can be affected by parent material and hole size. Sherex recommends trial installations to determine the proper grip range for the application. Closed End sizes available: M4, M5, M6, M8. Also available with imperial threads - minimum order quantity is 25,000 pieces if not in stock. Mating material holes must be smaller than flange diameter. Contact Sherex for test data. INSTALLATION TOOLING HUPO/HUKO Series can be installed with our Hand Tools and Hydro-Pneumatic Tools. For additional tooling information see pages 39-44.

All Parts have been manufactured by:

Available with closed end and seal for protection from fluids and air (X Series).

TUBTARA®- A DEJOND PRODUCT Sherex rivet nuts are compatible with the following hardware: GRADE 2, GRADE 5, CLASS 8.8 and CLASS 9.8 Please contact Sherex when using other grade fasteners.

Sherex Fastening Solutions

•

866-474-3739

•

www.sherex.com

•

info@sherex.com

CAH HALF HEX BODY LARGE FLANGE THIN WALL SERIES OPEN END

CLOSED END

L HD Part Number Thread Size Grip Range (Steel) Min. Max. ± .015 ±.010 ±.025* CAH2-0632-080 6-32 UNC .020 .080 .385 .375 CAH2-0632-130 6-32 UNC .080 .130 .435 .375 CAH2-0832-080 8-32 UNC .020 .080 .385 .375 CAH2-0832-130 8-32 UNC .080 .130 inches .435 .375 unified thread unit CAH2-1024-130 10-24 UNC .020 .130 .435 .390 CAH2-1024-225 10-24 UNC .130 .225 .535 .390 L HD Part Number Thread Size Grip Range CAH2-1032-130 10-32 UNF .020 .130 ±.435 .390 (Steel) Min. Max. .015 ±.010 ±.025* CAH2-1032-225 10-32 UNF .130 .225 .535 .390 CAH2-0632-080 6-32 UNC .020 .080 .385 .375 CAH2-2520-165 1/4-20 UNC .027 .585 .510 CAH2-0632-130 6-32 UNC .080 .165 .130 .435 .375 CAH2-2520-260 1/4-20 UNC .165 .685 .510 CAH2-0832-080 8-32 UNC .020 .260 .080 .385 .375 CAH2-2528-165 UNF .027 .585 .510 CAH2-0832-130♦ 1/4-28 8-32 UNC .080 .165 .130 .435 .375 CAH2-2528-260♦ 1/4-28 UNF .165 .685 .510 CAH2-1024-130 10-24 UNC .020 .260 .130 .435 .390 CAH2-3118-150 5/16-18 UNC .027 .685 .655* CAH2-1024-225 10-24 UNC .130 .150 .225 .535 .390 CAH2-3118-312 UNC .150 .845 .655* CAH2-1032-130 5/16-18 10-32 UNF .020 .312 .130 .435 .390 CAH2-1032-225♦ 5/16-24 10-32 UNF .130 .150 .225 .535 .390 CAH2-3124-150 UNF .027 .685 .655* CAH2-2520-165 1/4-20 UNC .027 .312 .165 .585 .510 CAH2-3124-312♦ 5/16-24 UNF .150 .845 .655* CAH2-2520-260 1/4-20 UNC .165 .150 .260 .510 CAH2-3716-150 3/8-16 .027 .685 .655* CAH2-2528-165 1/4-28 UNC UNF .027 .312 .165 .585 .510 CAH2-3716-312♦ 3/8-16 .150 .845 .655* CAH2-2528-260♦ ♦ 3/8-24 1/4-28 UNF UNF .165 .150 .260 .685 .510 CAH2-3724-150 .027 .685 .655* CAH2-3118-150♦ 5/16-18 UNC .150 .027 .312 .150 .685 .655* 3/8-24 UNF .845 .655* CAH2-3724-312

(

• The CAH series offers a semi hex body for excellent resistance to spin out in the hole. • Inch body • Inch and metric threads

CAH2-3118-312 5/16-18 UNC CAH2-3124-150♦ 5/16-24 UNF CAH2-3124-312♦ 5/16-24 UNF CAH2-3716-150 3/8-16 UNC CAH2-3716-312 3/8-16 UNC CAH2-3724-150♦ 3/8-24 UNF CAH2-3724-312♦ 3/8-24 UNF

.150 .027 .150 .027 .150 .027 .150

.312 .150 .312 .150 .312 .150 .312

metric thread (unit

CLOSED END

SEALED HEAD

Part Number (Steel) CAH2-470-2.0♦ CAH2-470-3.3♦ CAH2-580-3.3 CAH2-580-5.7♦ Part Number CAH2-610-4.2 (Steel) CAH2-610-6.6 CAH2-470-2.0♦ CAH2-8125-3.8 CAH2-470-3.3♦ CAH2-8125-7.9 CAH2-580-3.3 CAH2-1015-3.8 CAH2-580-5.7♦ CAH2-1015-7.9 CAH2-610-4.2 ♦

)

.845 .685 .845 .685 .845 .685 .845

.655* .655* .655* .655* .655* .655* .655*

HT D (A/F) ± .003 Max. .027 .249 .027 .249 .027 .249 .027 .249 .027 .280 .027 (A/F) D.280 HT ±.027 .003 .280 Max. .027 .280 .027 .249 .030 .374 .027 .249 .030 .374 .027 .249 .030 .374 .027 .249 .030 .374 .027 .280 .035 .499 .027 .280 .035 .499 .027 .280 .027 .280 .035 .499 .030 .374 .035 .499 .030 .374 .035 .499 .030 .374 .035 .499 .030 .374 .035 .499 .035 .499 .035 .499 .035 .035 .035 .035 .035 .035 .035

.499 .499 .499 .499 .499 .499 .499

IL Max. .295 .295 .295 .295 .275 .275 IL .275 Max. .275 .295 .400 .295 .400 .295 .400 .295 .400 .275 .530 .275 .515 .275 .275 .530 .400 .515 .400 .530 .400 .515 .400 .530 .530 .515

LB ± .015 .740 .740 .740 .740 1.030 1.030 LB 1.030 ± .015 1.030 .740 1.190 .740 1.190 .740 1.190 .740 1.190 1.030 1.445 1.030 1.445 1.030 1.030 1.445 1.190 1.445 1.190 1.445 1.190 1.445 1.190 1.445 1.445 1.445

ILB Max. .640 .580 .640 .580 .845 .735 ILB .845 Max. .735 .640 1.015 .580 .915 .640 1.015 .580 .915 .845 1.235 .735 1.220 .845 .735 1.235 1.015 1.220 .915 1.235 1.015 1.220 .915 1.235 1.235 1.220

ITD Hole Size (A/F) Ref. +.004/-.000 .575 .250 .640 .250 .575 .250 .640 .250 .695 .281 .805 .281 ITD Hole Size (A/F) .695 .281 Ref. +.004/-.000 .805 .281 .575 .250 .945 .375 .640 .250 1.085 .375 .575 .250 .945 .375 .640 .250 1.085 .375 .695 .281 1.045 .500 .805 .281 1.170 .500 .695 .281 .805 .281 1.045 .500 .945 .375 1.170 .500 1.085 .375 1.045 .500 .945 .375 1.170 .500 1.085 .375 1.045 .500 1.045 .500 1.170 .500

IL Max. 7.49 7.49 6.99 6.99 IL 10.16 Max. 10.16 7.49 13.46 7.49 13.08 6.99 13.46 6.99 13.08 10.16

LB ± .38 18.80 18.80 26.16 26.16 LB 30.23 ± .38 30.23 18.80 36.70 18.80 36.70 26.16 36.70 26.16 36.70 30.23

ILB Max. 16.26 14.73 21.46 18.67 ILB 25.78 Max. 23.24 16.26 31.37 14.73 30.99 21.46 31.37 18.67 30.99 25.78

ITD Hole Size (A/F) Ref. +.10/-.000 14.61 6.35 16.26 6.35 17.65 7.14 20.45 Hole 7.14 Size (A/F) ITD 24.00 9.53 Ref. +.10/-.000 27.56 9.53 14.61 6.35 26.54 12.70 16.26 6.35 29.72 12.70 17.65 7.14 26.54 12.70 20.45 7.14 29.72 12.70 24.00 9.53

.515 .530 .515 .530 .515 .530 .515

1.445 1.445 1.445 1.445 1.445 1.445 1.445

1.220 1.235 1.220 1.235 1.220 1.235 1.220

1.170 1.045 1.170 1.045 1.170 1.045 1.170

.500 .500 .500 .500 .500 .500 .500

- millimeters)

Thread Size Grip Range Min. Max. M4x0.7 ISO 0.50 2.00 M4x0.7 ISO 2.00 3.30 M5x0.8 ISO 0.50 3.30 M5x0.8 ISO 3.30 5.70 Thread Size Grip Range M6x1.0 ISO 0.70 4.20 Min. Max. M6x1.0 ISO 4.20 6.60 M4x0.7 ISO 0.50 2.00 M8x1.25 ISO 0.70 3.80 M4x0.7 ISO 2.00 3.30 M8x1.25 ISO 3.80 7.90 M5x0.8 ISO 0.50 3.30 M10x1.5 ISO 0.70 M5x0.8 ISO 3.30 3.80 5.70 M10x1.5 ISO 3.80 M6x1.0 ISO 0.70 7.90 4.20

L ± .38 9.78 11.05 11.05 13.59 L 14.86 ± .38 17.40 9.78 17.40 11.05 21.46 11.05 17.40 13.59 21.46 14.86

HD ±.25 ±.64* 9.53 9.53 9.91 9.91 HD 12.96 ±.25 ±.64* 12.96 9.53 16.64* 9.53 16.64* 9.91 16.64* 9.91 16.64* 12.96

HT D (A/F) ± .08 Max. 0.68 6.35 0.68 6.35 0.68 7.10 0.68 D7.10 (A/F) HT 0.76 9.50 ± .08 Max. 0.76 9.50 0.68 6.35 0.89 12.70 0.68 6.35 0.89 12.70 0.68 7.10 0.89 12.70 0.68 7.10 0.89 12.70 0.76 9.50

CAH2-610-6.6 M6x1.0 ISO 4.20 6.60 17.40 12.96 0.76 9.50 10.16 30.23 23.24 27.56 9.53 ♦ Non-Standard Part: Minimum order quantity required after depletion of stock. Please contact Sherex for current availability. CAH2-8125-3.8 M8x1.25 ISO 0.70 3.80 17.40 16.64* 0.89 12.70 13.46 36.70 31.37 26.54 12.70 CAH2-8125-7.9 M8x1.25 ISO 3.80 7.90 21.46 16.64* 0.89 12.70 13.08 36.70 30.99 29.72 12.70 part numbering CAH2-1015-3.8 M10x1.5 ISO 0.70system 3.80 17.40 16.64* 0.89 12.70 13.46 36.70 31.37 26.54 12.70 CAH2-1015-7.9♦ M10x1.5 ISO 3.80 7.90 21.46 16.64* 0.89 12.70 13.08 36.70 30.99 29.72 12.70 Part Number CAH Specifications Example: CAH2-2520-165 Material: Steel 1008/1010 2 2520 165 (_) CAH Stainless Steel 302* Material Thread Size Grip Range Empty-Open End Product Style Aluminum 5056 1-Stainless Steel B-Closed End Semi Hex RoHS Compliant Finishes: 2-Steel T-Clear Trivalent Thin Wall Series Zinc Plated-Yellow Trivalent Chromate 3-Aluminum per Sherex SFS-01-001, SC2

Zinc Plated-Clear Trivalent Chromate per Sherex SFS-01-001

Special finish or material available upon request

*Contact Sherex for exact product dimensions in Stainless Steel. Grip range can be affected by parent material and hole size. Sherex recommends trial installations to determine the proper grip range for the application. Contact Sherex for details. CAH style rivet nuts are available in sealed head and closed end designs. Other specials available upon request. Contact Sherex for test data. INSTALLATION TOOLING CAH Series can be installed with our Hand Tools, Pneumatic Tools, and Hydro-Pneumatic Tools. For additional tooling information see pages 39-44.

Sherex rivet nuts are compatible with the following hardware: GRADE 2, GRADE 5, CLASS 8.8 and CLASS 9.8 Please contact Sherex when using other grade fasteners.

Sherex Fastening Solutions

•

866-474-3739

•

www.sherex.com

•

info@sherex.com

HUPO/HUKO HALF HEX BODY METRIC SERIES HUPO STAINLESS SERIES

HUPO/ HUKO HALF HEX SERIES hupo series (unit Part Number (304 Stainless Steel)

Thread Size

TU-SSM4HUPO20 TU-SSM5HUPO30 TU-SSM6HUPO30 TU-SSM6HUPO50 TU-SSM8HUPO30 TU-SSM8HUPO55 TU-SSM10HUPO35

M4X0.7 ISO M5X0.8 ISO M6X1.0 ISO M6X1.0 ISO M8X1.25 ISO M8X1.25 ISO M10X1.5 ISO

- millimeters)

Grip Range (E) Min.

Max.

L ± 0.35

D ± 0.35/-0.15

0.5 0.5 0.5 3.0 0.5 3.0 0.8

2.0 3.0 3.0 5.5 3.0 5.5 3.5

11.0 11.5 14.5 16.5 16.0 18.5 21.5

9.0 10.0

d (A/F) -0.02/-0.15

Hole Size (b+0.1)

1.0 1.0

6.0 7.0

12.0

1.5

9.0

15.0 17.0

1.5 1.5

11.0 13.0

K ± 0.15/-0.05

part numbering system HUPO Specifications Part Number Grip Range (E) L K Diameter-Inch Diameter-Metric Hole Size - Inch Hole Size - Metric Part Number D Material Example: Thread Size TU-SM5UPO30ZT d (A/F) d (A/F) (b+0.1) (A/F) (b+.004) (A/F) (304 Stainless Steel) Min. Max. Steel QST 34-3 TU UNF S M5 0.295 0.020 UP O 7.0 30 0.276 ZT 7.0 TU-SS1032HUKO30 0.020 0.118 0.472 0.276 Stainless Steel 304 Cu 10-32 TU-SS2520HUKO30 UNC Style0.020 0.118 0.571 0.374 0.354 9.0 End 9.0 (Clear) Product Material Thread Size 0.020 Product Type O-Open Grip0.354 Range Zinktop Stainless Steel 316 Cu 1/4-20 0.422 11.0 0.433 11.0 5/16-18 UNC TU-SS3118HUKO30 0.020 0.630 0.453 0.020 0.118 Metric S-Steel Large Flange, Flat Head X-Closed End Aluminum ALMG 2.5 A-Aluminum Metric Body RoHs Compliant Finish: SS-304 Stainless Steel Zinktop (Clear), 96 w / 480 r *316-316 Stainless Steel Special finish or material available upon request Grip Range (E)

Part Number Thread Size HUKO STAINLESS SERIES (304 Stainless Steel) TU-SSM4HUPO20 TU-SSM5HUPO30 TU-SSM6HUPO30 TU-SSM6HUPO50 TU-SSM8HUPO30 TU-SSM8HUPO55 TU-SSM10HUPO35

M4X0.7 ISO M5X0.8 ISO M6X1.0 ISO M6X1.0 ISO M8X1.25 ISO M8X1.25 ISO M10X1.5 ISO d

R 0.3

Min.

Max.

L ± 0.35

D ± 0.35/-0.15

0.5 0.5 0.5 3.0 0.5 3.0 0.8

2.0 3.0 3.0 5.5 3.0 5.5 3.5

11.0 11.5 14.5 16.5 16.0 18.5 21.5

9.0 10.0

huko series (unit Part Number (304 Stainless Steel)

Thread Size

TU-SS1032HUKO30 TU-SS2520HUKO30 TU-SS3118HUKO30

10-32 UNF 1/4-20 UNC 5/16-18 UNC

d (A/F) -0.02/-0.15

Hole Size (b+0.1)

1.0 1.0

6.0 7.0

12.0

1.5

9.0

15.0 17.0

1.5 1.5

11.0 13.0

K ± 0.15/-0.05

Min.

Max.

0.020 0.020 0.020

0.118 0.118 0.118

0.472 0.571 0.630

Diameter-Inch d (A/F)

0.295 0.020 0.374 0.020 0.453 0.020

Diameter-Metric d (A/F)

0.276 0.354 0.422

Hole Size - Inch Hole Size - Metric (b+0.1) (A/F) (b+.004) (A/F)

7.0 9.0 11.0

0.276 0.354 0.433

7.0 9.0 11.0

S 1032 Material Thread Size S-Steel A-Aluminum SS-304 Stainless Steel *316-316 Stainless Steel

• The HUKO series has a small flange for a near flush installation. • Metric body

Part Number Example: TU-SS1032HUKO30 TU Product Style Metric

• Metric body and metric threads

- inches)

Grip Range (E)

part numbering system HUKO Specifications Material Steel QST 34-3 Stainless Steel 304 Cu Stainless Steel 316 Cu

• The HUPO series offers a half hex body with a large flange that provides increased strength.

• Inch threads HUK Product Type Small Flange Hexagonal Shank Inch Body

O O-Open End X-Closed End

30 Grip Range

Special finish or material available upon request

*316 Stainless Steel has extra corrosion resistance and can be used in the medical, chemical and food industries. Grip range can be affected by parent material and hole size. Sherex recommends trial installations to determine the proper grip range for the application. Also available with imperial threads - minimum order quantity is 25,000 pieces if not in stock. Mating material holes must be smaller than flange diameter. INSTALLATION TOOLING HUPO/HUKO Series can be installed with our Hand Tools and Hydro-Pneumatic Tools. For additional tooling information see pages 39-44.

Available with closed end and seal for protection from fluids and air (X Series).

All Parts have been manufactured by: TUBTARA®- A DEJOND PRODUCT

Sherex Fastening Solutions

•

866-474-3739

•

www.sherex.com

•

info@sherex.com

ROUND BODY RIVET NUTS Sherex offers a comprehensive selection of round body rivet nuts designed to fit into Inch (Imperial) or Metric drilled or punched hole sizes. inch body style Body

Product Line

Smooth

Head (Flange)

Knurled

✓ ✓

CAO CA

CAL CFT/CAT

CPB/CPN*

LRGR

✓ ✓

Large

✓ ✓ ✓ ✓

✓

✓ ✓

✓

Riv-Float®

✓ ✓

Large Sizes (up Floating Nut (for Off-center to ¾”, M20) applications)

✓

Diamond Knurl

CFW/CAW

360 Swaging

✓ ✓ ✓ ✓

CAK

Small

Heavy Duty (Thick Wall)

✓

✓ ✓

*Prebulbed, Slotted (CPN has straight shank)

metric body style Body

Head (Flange)

Product Line Smooth

UPO Tubtara® UFO Tubtara® UKO Tubtara®

Knurled

Large

✓

✓ ✓

UFO RS Tubtara® CLM CKM

Sherex Fastening Solutions

Countersunk

✓

UPO RS Tubtara®

Small

✓ ✓ ✓

✓

✓ ✓

✓

•

✓ ✓

866-474-3739

•

www.sherex.com

•

info@sherex.com

CAO SMALL FLANGE SMOOTH BODY THIN WALL SERIES

Thread Size Grip Range L Part Number (Steel) Min. Max. ± .015 CAO2-0632-080 6-32 UNC .020 .080 .385 CAO2-0832-080 8-32 UNC .020 .080 .385 CAO2-1024-130 10-24 UNC .020 .130 .440 CAO2-1032-130 10-32 UNF .020 .130 .440 CAO2-2520-165 1/4-20 UNC .030 .165 .580 unified thread (unit ) CAO2-2528-165 ♦ 1/4-28 UNF .030- inches .165 .580 CAO2-3118-200 5/16-18 UNC .040 .200 .690 Size Grip L Part Number ♦ Thread CAO2-3124-200 5/16-24 UNF .040 Range .200 .690 (Steel) Min. .200 Max. ±.690 .015 CAO2-3716-200 3/8-16 UNC .040 CAO2-3724-200 UNF .040 .690 CAO2-0632-080♦ 3/8-24 6-32 UNC .020 .200 .080 .385 CAO2-0832-080 8-32 UNC .020 .080 .385 CAO2-1024-130 10-24 UNC .020 .130 .440 CAO2-1032-130 10-32 UNF .020 .130 .440 CAO2-2520-165 1/4-20 UNC .030 .165 .580 CAO2-2528-165♦ 1/4-28 UNF .030 .165 .580 CAO2-3118-200 5/16-18 UNC .040 .200 .690 CAO2-3124-200♦ 5/16-24 UNF .040 .200 .690 CAO2-3716-200 3/8-16 UNC .040 .200 .690 CAO2-3724-200♦ 3/8-24 UNF .040 .200 .690

HD ± .010 ±.015* .295 .295 .320 .320 .425 .425 .560* HD .560* ± .010 ±.015* .560* .560* .295 .295 .320 .320 .425 .425 .560* .560* .560* .560*

HT ± .003 .018 .018 .020 .020 .022 .022 .022 HT .022 ±.022 .003 .022 .018 .018 .020 .020 .022 .022 .022 .022 .022 .022

D Max. .249 .249 .280 .280 .374 .374 .499 D .499 Max. .499 .499 .249 .249 .280 .280 .374 .374 .499 .499 .499 .499

IL Max. .315 .315 .330 .330 .440 .440 .540 IL .540 Max. .540 .540 .315 .315 .330 .330 .440 .440 .540 .540 .540 .540

Hole Size +.006/-.000 .250 .250 .281 .281 .375 .375 .500 Hole Size .500 +.006/-.000 .500 .500 .250 .250 .281 .281 .375 .375 .500 .500 .500 .500

♦ Non-Standard Part: Minimum order quantity required after depletion of stock. Please contact Sherex for current availability.

• The CAO series offers body diameters that will fit in common hole sizes. • The small flange also allows for near flush installations. • Inch body • Inch and metric threads

metric thread (unit Part Number (Steel)

Thread Size

CAO2-470-2.0 CAO2-580-3.3 CAO2-610-4.2 CAO2-8125-5.1 CAO2-1015-5.1

M4x0.7 ISO M5x0.8 ISO M6x1.0 ISO M8x1.25 ISO M10x1.5 ISO

Part Number (Steel)

Thread Size

- millimeters)

Grip Range Min. Max. 0.50 2.00 0.50 3.30 0.76 4.20 1.02 5.10 1.02 5.10

L ± .38 9.78 11.18 14.73 17.53 17.53

HD ± .25 ± .38* 7.49 8.13 10.80 14.22* 14.22*

Grip Range L ± Min. Max. ± .38 CAO2-470-2.0 M4x0.7 ISO 0.50 2.00 9.78 part numbering system CAO2-580-3.3 M5x0.8 ISO 0.50 3.30 11.18 CAO2-610-4.2 M6x1.0 ISO 0.76 4.20 CAO Specifications Part Number 14.73 CAO2-8125-5.1 M8x1.25 ISO 1.02 5.10CAO2-2520-165 17.53 Material: Example: Steel 1008/1010 CAO2-1015-5.1 M10x1.5 ISO 1.02 5.10 17.53 Aluminum 5056

CAO Product Style Low Profile Smooth Shank RoHS Compliant Finishes: Inch: Zinc Plated-Clear Trivalent Chromate Thin Wall Series per Sherex SFS-01-001

HD .25 ± .38* 7.49 8.13 10.80 14.22* 14.22*

2 Material 2-Steel 3-Aluminum

Metric: Zinc Plated-Yellow Trivalent Chromate per Sherex SFS-01-001, SC2

HT ± .08 0.46 0.51 0.56 0.56 0.56

D Max. 6.32 7.11 9.50 12.67 12.67

IL Max. 8.00 8.38 11.18 13.72 13.72

Hole Size +.15/-.000 6.40 7.20 9.60 12.70 12.70

HT ± .08 0.46 0.51 0.56 0.56 0.56

D Max. 6.32 7.11 9.50 12.67 12.67

IL Max. 8.00 8.38 11.18 13.72 13.72

Hole Size +.15/-.000 6.40 7.20 9.60 12.70 12.70

2520 Thread Size

165 Grip Range

CLOSED END

(_) Empty-Open End B-Closed End T-Clear Trivalent

Special finish or material available upon request

Grip range can be affected by parent material and hole size. Sherex recommends trial installations to determine the proper grip range for the application. Mating material holes must be smaller than flange diameter. Contact Sherex for details. Contact Sherex for test data. INSTALLATION TOOLING CAO Series can be installed with our Hand Tools, Pneumatic Tools, and Hydro-Pneumatic Tools. For additional tooling information see pages 39-44. Sherex rivet nuts are compatible with the following hardware: GRADE 2, GRADE 5, CLASS 8.8 and CLASS 9.8 Please contact Sherex when using other grade fasteners.

Sherex Fastening Solutions

•

866-474-3739

•

www.sherex.com

•

info@sherex.com

CA HEAVY DUTY RIVET NUT FLAT HEAD SERIES

unified thread (unit

• The CA series offers a thick head and thick collapse chamber wall thickness for heavy duty applications. • Inch body and inch threads

CLOSED END

Part Number (Steel) CA-0440S-060♦ CA-0440S-085♦ CA-0440S-110♦ CA-0632S-075♦ CA-0632S-120 CA-0632S-160♦ CA-0832S-075 CA-0832S-120 CA-0832S-160♦ CA-1024S-080♦ CA-1024S-130♦ CA-1024S-180♦ CA-1032S-080 CA-1032S-130 CA-1032S-180♦ CA-2520S-080 CA-2520S-140♦ CA-2520S-200 CA-3118S-125 CA-3118S-200 CA-3118S-275♦ CA-3716S-115 CA-3716S-200 CA-3716S-285♦ CA-5013S-150 CA-5013S-250♦ CA-5013S-350♦

Thread Size

- inches)

Grip Range Min. Max. .010 .060 .060 .085 .085 .100 .010 .075 .075 .120 .120 .160 .010 .075 .075 .120 .120 .160 .010 .080 .080 .130 .130 .180 .010 .080 .080 .130 .130 .180 .020 .080 .080 .140 .140 .200 .030 .125 .125 .200 .200 .275 .030 .115 .115 .200 .200 .285 .050 .150 .150 .250 .250 .350

4-40 UNC 4-40 UNC 4-40 UNC 6-32 UNC 6-32 UNC 6-32 UNC 8-32 UNC 8-32 UNC 8-32 UNC 10-24 UNC 10-24 UNC 10-24 UNC 10-32 UNF 10-32 UNF 10-32 UNF 1/4-20 UNC 1/4-20 UNC 1/4-20 UNC 5/16-18 UNC 5/16-18 UNC 5/16-18 UNC 3/8-16 UNC 3/8-16 UNC 3/8-16 UNC 1/2-13 UNC 1/2-13 UNC 1/2-13 UNC

L ± .015 .345 .370 .400 .438 .500 .500 .438 .500 .500 .531 .594 .641 .531 .594 .641 .625 .687 .750 .750 .875 .937 .844 .938 1.031 .906 1.031 1.141

HD ± .015 .270 .270 .270 .325 .325 .325 .357 .357 .357 .406 .406 .406 .406 .406 .406 .475 .475 .475 .665 .665 .655 .781 .781 .781 .906 .906 .906

HT Nom. .025 .025 .025 .032 .032 .032 .032 .032 .032 .038 .038 .038 .038 .038 .038 .058 .058 .058 .062 .062 .062 .088 .088 .088 .085 .085 .085

D +.000/-.004 .155 .155 .155 .189 .189 .189 .221 .221 .221 .250 .250 .250 .250 .250 .250 .332 .332 .332 .413 .413 .413 .490 .490 .490 .625 .625 .625

IL Ref. .230 .230 .230 .300 .315 .270 .300 .315 .270 .380 .390 .390 .380 .390 .390 .450 .450 .450 .505 .555 .540 .585 .595 .605 .605 .630 .640

Hole Size .155-.157 .155-.157 .155-.157 .189-.193 .189-.193 .189-.193 .221-.226 .221-.226 .221-.226 .250-.256 .250-.256 .250-.256 .250-.256 .250-.256 .250-.256 .332-.338 .332-.338 .332-.338 .413-.423 .413-.423 .413-.423 .490-.500 .490-.500 .490-.500 .625-.635 .625-.635 .625-.635

♦ Non-Standard Part: Minimum order quantity required after depletion of stock. Please contact Sherex for current availability.

part numbering system COUNTERSUNK HEAD

CA Specifications Material: Steel 1008/1010/1110 Non-Magnetic Stainless Steel 302 Stainless Steel 430 Aluminum 5056/6053

Part Number Example: CA-2520S-080

RoHS Compliant Finish: Zinc Plated-Clear Trivalent Chromate per Sherex SFS-01-001

CA Product Style Heavy Duty Large Flange Smooth Shank

2520 Thread Size

Material S-Steel A-Aluminum SS-Stainless Steel 430 NM-Stainless Steel 302 NM318-Stainless Steel 316

(_) Empty-Open End B-Closed End T-Clear Trivalent K-Keyed Head

080 Grip Range

Special finish or material available upon request

KEYED HEAD

Sherex manufactures NAS 1329 and NAS 1330 style Rivet Nuts. See pages 26-29 for details. 16

Grip range can be affected by parent material and hole size. Sherex recommends trial installations to determine the proper grip range for the application. Contact Sherex for details. CA style rivet nuts are available in closed end, keyed, and countersunk head designs. Other specials available upon request. Contact Sherex for test data. INSTALLATION TOOLING CA Series can be installed with our Hand Tools and Hydro-Pneumatic Tools. For additional tooling information see pages 39-44. Sherex rivet nuts are compatible with the following hardware: GRADE 2, GRADE 5, CLASS 8.8 and CLASS 9.8 Please contact Sherex when using other grade fasteners.

Sherex Fastening Solutions

•

866-474-3739

•

www.sherex.com

•

info@sherex.com

LARGE SIZE ROUND SERIES

lrgr series

- round body unified threadBODY (unit - inches) LRGR SERIES - ROUND

Part Number Number Part Inch -- Steel Steel Inch Part Part Number Number LRGR2-5013-150 LRGR2-5013-150 Inch Inch -- Steel Steel LRGR2-6211-200 LRGR2-6211-200 LRGR2-5013-150 LRGR2-5013-150 LRGR2-7510-250♦♦ LRGR2-7510-250 LRGR2-6211-200 LRGR2-6211-200 LRGR2-7510-250 LRGR2-7510-250♦♦

Size Thread Size Thread

Grip Range Range HD HT Grip LL HD HT LRGR SERIES -- ROUND BODY LRGR SERIES ROUND BODY Grip Grip Range Range Min. Max. Min. Max.

Thread Size Thread Size 1/2-13 UNC UNC 1/2-13 5/8-11 UNC UNC 5/8-11 1/2-13 1/2-13 UNC UNC 3/4-10 UNC UNC 3/4-10 5/8-11 5/8-11 UNC UNC 3/4-10 3/4-10 UNC UNC

L L HD HT .015 .025 ±±HT .004 ±± .015 ±±HD .025 .004

D D

IL IL

Hole Size Size Hole

DD Max. Max.

IL IL Ref. Ref.

Hole Hole Size Size +.010/-.000 +.010/-.000

Min. Max. .015 .025 .004 Ref. +.010/-.000 Min. Max. .015 ±±.945 .025 ±±.085 .004 Max. Max. Ref. +.010/-.000 .050 .150 ±±1.260 1.260 .945 .085 .656 .984 .656 .050 .150 .656 .984 .656 .080 .200 1.428 1.181 1.181 .098 .098 .826 1.142 1.142 .827 .080 .200 1.428 .826 .827 .050 .150 1.260 .656 .984 .656 .050 .150 1.260 .945 .945 .085 .085 .656 .984 .656 .048 .250 1.210 1.235 1.235 .118 .118 .906 .878 .907 .048 .250 1.210 .906 .878 .907 .080 .200 1.428 .826 .827 .080 .200 1.428 1.181 1.181 .098 .098 .826 1.142 1.142 .827 .048 .250 1.210 .906 .878 .907 .048 .250 1.210 1.235 1.235 .118 .118 .906 .878 .907 HD unit Gripmetric Range HT - millimeters D IL Size LL HD Grip Range D IL Hole lrgr series - round body thread ( HT )Hole Size Part Number Number Size Thread Size Part Thread Grip DD IL Hole L Grip Range Range HD HT IL Hole Size Size Min. Max. .38 ±±HD .64 ±±HT .10 Max. Ref. +.25/-.000 Min. Max. ±±L.38 .64 .10 Max. Ref. +.25/-.000 Metric -- Steel Steel Metric Part Thread Part Number Number Thread Size Size Min. Max. ± .10 Max. Ref. +.25/-.000 Min. Max. ± .38 .38 ± ± .64 .64 ±±2.16 .10 Max. 25.00 Ref. +.25/-.000 LRGR2-12175-3.8 M12x1.75 ISO ISO 1.27 3.80 32.00 24.00 2.16 16.65 25.00 16.66 LRGR2-12175-3.8 M12x1.75 1.27 3.80 32.00 24.00 16.65 16.66 Metric Metric -- Steel Steel LRGR2-1620-5.0♦♦ M16x2.0 M16x2.0 ISO ISO 2.00 5.00 36.27 30.00 30.00 2.50 2.50 20.98 29.00 29.00 21.00 LRGR2-1620-5.0 2.00 5.00 36.27 20.98 21.00 LRGR2-12175-3.8 1.27 3.80 32.00 16.66 LRGR2-12175-3.8 M12x1.75 M12x1.75 ISO ISO 1.27 3.80 32.00 24.00 24.00 2.16 2.16 16.65 16.65 25.00 25.00 16.66 LRGR2-1620-5.0 2.00 5.00 36.27 21.00 LRGR2-1620-5.0♦♦ M16x2.0 M16x2.0 ISO ISO 2.00 5.00 36.27 30.00 30.00 2.50 2.50 20.98 20.98 29.00 29.00 21.00

LRGH SERIES - FULL HEX BODY HD Grip Range Range HT D (A/F) (A/F) LL HD HT D LRGH SERIES -- FULL HEX BODY LRGHGrip SERIES FULL HEX BODY application examples Part Number Number Size Thread Part Size Thread

Inch -- Steel Steel Inch Part Part Number Number LRGH2-5013-177 LRGH2-5013-177 Inch Inch -- Steel Steel LRGH2-6211-200 LRGH2-6211-200 LRGH2-5013-177 LRGH2-5013-177 LRGH2-6211-200 LRGH2-6211-200

Thread Size Thread Size 1/2-13 UNC UNC 1/2-13 5/8-11 UNC UNC 5/8-11 1/2-13 1/2-13 UNC UNC 5/8-11 5/8-11 UNC UNC

Vending Part NumberMachine Size Thread Size Part Number Thread Leg Leveler Metric Steel Metric -- Steel Part Thread Part Number Number Size Thread Size LRGH2-12175-4.5 M12x1.75 ISO ISO LRGH2-12175-4.5 M12x1.75 Metric Metric -- Steel Steel LRGH2-1620-5.0 M16x2.0 ISO ISO LRGH2-1620-5.0 M16x2.0 LRGH2-12175-4.5 LRGH2-12175-4.5 M12x1.75 M12x1.75 ISO ISO LRGH2-1620-5.0 M16x2.0 LRGH2-1620-5.0 M16x2.0 ISO ISO

IL IL

Hole Size Size (A/F) (A/F) Hole

IL IL Ref. Ref.

Hole Size Hole Size (A/F) (A/F) +.010/-.000 +.010/-.000

±±.959 .025 .004 Ref. .025 ±±.085 .004 Max. Max. Ref. .959 .085 .656 .866 .656 .866 1.260 .118 .118 .826 .965 1.260 .826 .965 .959 .085 .656 .866 .959 .085 .656 .866 1.260 .826 .965 1.260 .118 .118 .826 .965 HD HT D (A/F) (A/F) IL HD HT D IL

+.010/-.000 +.010/-.000 .656 .656 .827 .827 .656 .656 .827 .827 Hole Size Size (A/F) (A/F) Hole

Grip Grip Range Range Min. Max. Min. Max.

L (A/F) L HD HT (A/F) .015 .025 ±±HT .004 DDMax. Max. ±± .015 ±±HD .025 .004

Min. Max. Min. Max. .040 .177 .040 .177 Bracket .080 .200 .080 .200 .040 .177 .040 .177 .080 .200 .080 .200 Grip Range Range Grip

±±1.181 .015 .015 1.181 1.260 1.260 1.181 1.181 1.260 1.260 LL

L HD .38M16 .64 ±±L.38 ±±HD .64

Grip Grip Range Range Min. Max. Min. Max. Min. Min. 1.00 1.00 2.00 2.00 1.00 1.00 2.00 2.00

Round Max. ± ± Max. ± .38 .38 ± .64 .64 4.50 30.00 24.36 4.50 30.00 24.36 Bolt Rivet Nut 5.00 32.00 32.00 32.00 5.00 32.00 4.50 30.00 4.50 30.00 24.36 24.36 5.00 32.00 5.00 32.00 32.00 32.00

Leg Leveler

(A/F) HT (A/F) .10 DDMax. Max. ±±HT .10 ±±2.16 .10 .10 2.16 3.00 3.00 2.16 2.16 3.00 3.00

IL IL Ref. Ref.

Max. Ref. Max. 22.00 Ref. 16.65 22.00 16.65 20.98 24.50 24.50 20.98 16.65 16.65 22.00 22.00 20.98 20.98 24.50 24.50

• The LRGR series has a large flange for increased performance • Large diameter for heavy duty applications • Inch body • Inch and metric threads

Hole Size (A/F) Hole Size000 (A/F) 000 +.25/-. +.25/-. 000 000 +.25/-. +.25/-. 16.66 16.66 21.00 21.00 16.66 16.66 21.00 21.00

Rail Car Frame Bolt

Railcar Attachments

5/8” Round Rivet Nut

Rail Car Step

Sherex Fastening Solutions

•

866-474-3739

•

www.sherex.com

•

info@sherex.com

CPB PREBULBED SLOTTED BODY SERIES

• The CPB series offers a large grip range for installation into single, variable or multiple thickness materials. • Large backside footprint provides increased pull out resistance. • Designed to be installed in thin plastics without distorting the base material. • Inch body • Inch and metric threads

Part Number Thread Size Grip Range HD (Steel) Min. Max. Min. Max. CPB2-1024-175♦ 10-24 UNC .020 .175 .490 .510 .175 .320 .490 .510 CPB2-1024-320♦ 10-24 UNC CPB2-1032-175 10-32 UNF .020 .175 .490 .510 CPB2-1032-320 10-32 UNF .175 .320 .490 .510 CPB2-2520-280 1/4-20 UNC .020 .280 .610 .645 CPB2-2520-500 1/4-20 UNC .280 .500 .610 .645 unified thread (unit - inches) CPB2-3118-280 5/16-18 UNC .020 .280 .740 .770 CPB2-3118-500 5/16-18 UNC .280 Range .500 .740HD.770 Part Number Thread Size Grip (Steel) Min. Max. Min. Max. CPB2-1024-175♦ 10-24 UNC .020 .175 .490 .510 .175 .320 .490 .510 CPB2-1024-320♦ 10-24 UNC CPB2-1032-175 10-32 UNF .020 .175 .490 .510 CPB2-1032-320 10-32 UNF .175 .320 .490 .510 CPB2-2520-280 1/4-20 UNC .020 .280 .610 .645 CPB2-2520-500 1/4-20 UNC .280 .500 .610 .645 CPB2-3118-280 5/16-18 UNC .020 .280 .740 .770 CPB2-3118-500 5/16-18 UNC .280 .500 .740 .770

metric thread (unit Thread Size Part Number (Steel) CPB2-580-4.45♦ M5x0.8 ISO CPB2-580-8.1 M5x0.8 ISO CPB2-610-7.1 M6x1.0 ISO CPB2-610-12.7♦ M6x1.0 ISO CPB2-8125-7.1 M8x1.25 ISO CPB2-8125-12.7♦ M8x1.25 ISO

L ±.015 .828 .921 .828 .921 1.000 1.234 1.141 1.375 L ±.015 .828 .921 .828 .921 1.000 1.234 1.141 1.375

HT ±.005 .038 .038 .038 .038 .059 .059 .062 .062 HT ±.005 .038 .038 .038 .038 .059 .059 .062 .062

D Max. .329 .329 .329 .329 .382 .382 .495 .495 D Max. .329 .329 .329 .329 .382 .382 .495 .495

IL Ref. .410 .410 .410 .410 .505 .505 .570 .570 IL Ref. .410 .410 .410 .410 .505 .505 .570 .570

Hole Size +.006/-.000 .336 .336 .336 .336 .390 .390 .500 .500 Hole Size +.006/-.000 .336 .336 .336 .336 .390 .390 .500 .500

L ±.0.38 21.03 23.80 25.40 31.32 28.95 34.90

HT ±.0.13 0.96 0.96 1.50 1.50 1.57 1.57

D Max. 8.35 8.35 9.70 9.70 12.57 12.57

IL Ref. 10.00 10.00 12.80 12.80 14.48 14.48

Hole Size +.15/-.000 8.55 8.55 10.00 10.00 12.70 12.70

- millimeters)

Grip Range Min. Max. 0.50 4.45 4.45 8.10 0.50 7.10 7.10 12.70 0.50 7.10 7.10 12.70

HD Min. Max. 12.45 12.95 12.45 12.95 15.50 16.38 15.50 16.38 18.80 19.65 18.80 19.65

♦ Non-Standard Part: Minimum order quantity required after depletion of stock. Please contact Sherex for current availability. Thread Size Grip Range HD L HT D IL Hole Size Part Number (Steel) Min. Max. Min. Max. ±.0.38 ±.0.13 Max. Ref. +.15/-.000 0.50 4.45 12.45 12.95 21.03 0.96 8.35 10.00 8.55 CPB2-580-4.45♦ M5x0.8 ISO part numbering system CPB2-580-8.1 M5x0.8 ISO 4.45 8.10 12.45 12.95 23.80 0.96 8.55 8.35 10.00 CPB2-610-7.1 M6x1.0 ISO 0.50 7.10 15.50 16.38 25.40 1.50 9.70 12.80 10.00 CPB Specifications Part Number 7.10 12.70 15.50 16.38 31.32 1.50 9.70 12.80 10.00 CPB2-610-12.7♦ M6x1.0 ISO Material: Example: CPB2-2520-280 CPB2-8125-7.1 M8x1.25 ISO 0.50 7.10 18.80 19.65 28.95 1.57 12.57 14.48 12.70 Steel 1008/1010 2520 1.57 280 Aluminum 6061 ♦ M8x1.25 ISO CPB 12.70 18.802 19.65 CPB2-8125-12.7 7.10 34.90 12.57 14.48 (_) 12.70

WEDGE HEAD

RoHS Compliant Finishes: Zinc Plated-Yellow Trivalent Chromate per Sherex SFS-01-001, SC2 Zinc Plated-Clear Trivalent Chromate per Sherex SFS-01-001

Product Style Slotted Body Pre-bulbed

2-Steel 3-Aluminum

Thread Size

Grip Range

Empty-Open End T-Clear Trivalent W-Wedge Head TR-Trim Head

Special finish or material available upon request

TRIM HEAD

INSTALLATION TOOLING CPB Series can be installed with our Hand Tools, Pneumatic Tools, and Hydro-Pneumatic Tools. For additional tooling information see pages 39-44. Sherex rivet nuts are compatible with the following hardware: GRADE 2, GRADE 5, CLASS 8.8 and CLASS 9.8 Please contact Sherex when using other grade fasteners.

Sherex Fastening Solutions

•

866-474-3739

•

www.sherex.com

•

info@sherex.com

CPN STRAIGHT SHANK SLOTTED BODY SERIES

Part Number Thread Size Grip Range HD (Steel) Min. Max. Min. Max CPN2-1024-175♦ 10-24 UNC .020 .175 .490 .510 CPN2-1024-320♦ 10-24 UNC .175 .320 .490 .510 10-32 UNF .020 .175 .490 .510 CPN2-1032-175♦ CPN2-1032-320♦ 10-32 UNF .175 .320 .490 .510 CPN2-2520-280 1/4-20 UNC .020 .280 .610 .645 .280 .500 .610 .645 CPN2-2520-500♦ 1/4-20 UNC CPN2-3118-280 ♦ 5/16-18 UNC .020 .280 .740 unified thread - inches (unit ) .770 CPN2-3118-500♦ 5/16-18 UNC .280 .500 .740 .770 Thread Size Grip Range HD Part Number (Steel) Min. Max. Min. Max CPN2-1024-175♦ 10-24 UNC .020 .175 .490 .510 CPN2-1024-320♦ 10-24 UNC .175 .320 .490 .510 10-32 UNF .020 .175 .490 .510 CPN2-1032-175♦ CPN2-1032-320♦ 10-32 UNF .175 .320 .490 .510 CPN2-2520-280 1/4-20 UNC .020 .280 .610 .645 .280 .500 .610 .645 CPN2-2520-500♦ 1/4-20 UNC CPN2-3118-280♦ 5/16-18 UNC .020 .280 .740 .770 CPN2-3118-500♦ 5/16-18 UNC .280 .500 .740 .770

metric thread (unit Part Number (Steel)

Thread Size

CPN2-580-4.45♦ M5x0.8 ISO CPN2-580-8.1♦ M5x0.8 ISO CPN2-610-7.1♦ M6x1.0 ISO CPN2-610-12.7♦ M6x1.0 ISO CPN2-8125-7.1♦ M8x1.25 ISO CPN2-8125-12.7♦ M8x1.25 ISO

L ± .015 .781 .921 .781 .921 1.000 1.234 1.141 1.375 L ± .015 .781 .921 .781 .921 1.000 1.234 1.141 1.375

HT ± .005 .038 .038 .038 .038 .059 .059 .062 .062 HT ± .005 .038 .038 .038 .038 .059 .059 .062 .062

D Max. .272 .272 .272 .272 .346 .346 .437 .437 D Max. .272 .272 .272 .272 .346 .346 .437 .437

IL Ref. .425 .425 .425 .425 .505 .505 .570 .570 IL Ref. .425 .425 .425 .425 .505 .505 .570 .570

Hole Size +.006/-.000 .273 .273 .273 .273 .347 .347 .438 .438 Hole Size +.006/-.000 .273 .273 .273 .273 .347 .347 .438 .438

L ± 0.38 21.03 23.80 25.40 31.32 28.95 34.90

HT ± .13 0.96 0.96 1.50 1.50 1.57 1.57

D Max. 7.47 7.47 8.79 8.79 11.10 11.10

IL Ref. 9.90 9.90 12.80 12.80 14.48 14.48

Hole Size +.15/-0.00 7.48 7.48 8.80 8.80 11.11 11.11

- millimeters)

Grip Range Min. Max. 0.50 4.45 4.45 8.10 0.50 7.10 7.10 12.70 0.50 7.10 7.10 12.70

HD Min. Max 12.45 12.95 12.45 12.95 15.50 16.38 15.50 16.38 18.80 19.65 18.80 19.65

• The CPN series offers a large grip range for installation into single, variable or multiple thickness materials. • Large backside footprint provides increased pull out resistance. • Designed to be installed in thin plastics without distorting the base material. • Inch body • Inch and metric threads

♦ Non-Standard Part: Minimum order quantity required after depletion of stock. Please contact Sherex for current availability.

Part Number (Steel)

Thread Size

Grip Range HD Min. Max. Min. Max 0.50 4.45 12.45 12.95 CPN2-580-4.45♦ M5x0.8 ISO part numbering system CPN2-580-8.1 ♦ M5x0.8 ISO 4.45 8.10 12.45 12.95 CPN2-610-7.1♦ M6x1.0 ISO 0.50 7.10 15.50 16.38 CPN Specifications Part Number CPN2-610-12.7 ♦ M6x1.0 ISO 7.10 12.70 15.50 16.38 Material: Example: CPN2-2520-280 CPN2-8125-7.1 ♦ M8x1.25 ISO 0.50 7.10 18.80 19.65 Steel 1008/1010 Aluminum 6061 CPN 12.70 18.80 219.65 CPN2-8125-12.7 ♦ M8x1.25 ISO 7.10 RoHS Compliant Finishes: Zinc Plated-Yellow Trivalent Chromate per Sherex SFS-01-001, SC2 Zinc Plated-Clear Trivalent Chromate per Sherex SFS-01-001

Product Style Slotted Body Straight Shank

L ± 0.38 21.03 23.80 25.40 31.32 28.95 2520 34.90

HT ± .13 0.96 0.96 1.50 1.50 1.57 1.57

2-Steel Thread Size 3-Aluminum

D Max. 7.47 7.47 8.79 8.79 11.10 280 11.10

IL Hole Size Ref. +.15/-0.00 9.90 7.48 9.90 7.48 12.80 8.80 12.80 8.80 14.48 11.11 14.48 (_) 11.11

Grip Range

Empty-Open End T-Clear Trivalent W-Wedge Head

Special finish or material available upon request

WEDGE HEAD

Grip range can be affected by parent material and hole size. Sherex recommends trials installations to determine the proper grip range for the application. Contact Sherex for details. Contact Sherex for test data. CPN Series must be installed with spin pull tooling. For more information see pages 39-44. Sherex rivet nuts are compatible with the following hardware: GRADE 2, GRADE 5, CLASS 8.8 and CLASS 9.8 Please contact Sherex when using other grade fasteners.

Sherex Fastening Solutions

•

866-474-3739

•

www.sherex.com

•

info@sherex.com

CAK SMALL FLANGE KNURLED BODY THIN WALL SERIES OPEN END

CLOSED END

Part Number Thread Size Grip Range (Steel) Min. Max. CAK2-0632-080 thread 6-32 UNC .020 .080 unified unit CAK2-0632-130 6-32 UNC .080 .130 CAK2-0832-080 8-32 UNC .020 .080 Part Number Thread Size Grip Range CAK2-0832-130 8-32 UNC .080 .130 (Steel) Min. Max. CAK2-1024-130 10-24 UNC .020 .130 CAK2-0632-080 6-32 UNC .020 CAK2-1024-225 10-24 UNC .130 .080 .225 CAK2-0632-130 6-32 UNC .080 CAK2-1032-130 10-32 UNF .020 .130 .130 CAK2-0832-080 8-32 UNC .020 CAK2-1032-225 10-32 UNF .130 .080 .225 CAK2-0832-130 8-32 UNC CAK2-2520-165 1/4-20 UNC .080 .027 .130 .165 CAK2-1024-130 10-24 UNC CAK2-2520-260 1/4-20 UNC .020 .165 .130 .260 CAK2-1024-225 10-24 UNC .130 .225 CAK2-2528-165♦ 1/4-28 UNF .027 .165 CAK2-1032-130 10-32 UNF .020 .130 CAK2-2528-260♦ 1/4-28 UNF .165 .260 CAK2-1032-225 10-32 UNF CAK2-3118-150 5/16-18 UNC .130 .027 .225 .150 CAK2-2520-165 1/4-20 UNC CAK2-3118-312 5/16-18 UNC .027 .150 .165 .312 CAK2-2520-260 1/4-20 UNC CAK2-3124-150♦ 5/16-24 UNF .165 .027 .260 .150 CAK2-2528-165 ♦ 1/4-28 UNF .027 .165 CAK2-3124-312♦ 5/16-24 UNF .150 .312 CAK2-2528-260 CAK2-3716-150♦ 1/4-28 3/8-16 UNF UNC .165 .027 .260 .150 CAK2-3118-150 UNC .027 CAK2-3716-312 5/16-18 3/8-16 UNC .150 .150 .312 CAK2-3118-312 UNC .150 CAK2-3724-150♦ 5/16-18 3/8-24 UNF .027 .312 .150 CAK2-3124-150 UNF .027 CAK2-3724-312♦♦ 5/16-24 3/8-24 UNF .150 .150 .312 CAK2-3124-312♦ 5/16-24 UNF .150 .312 CAK2-3716-150 3/8-16 UNC .027 .150 CAK2-3716-312 3/8-16 UNC .150 .312 CAK2-3724-150♦ 3/8-24 UNF .027 .150 CAK2-3724-312♦ 3/8-24 UNF .150 .312

(

• The CAK series has a small flange for a near flush installation. • Knurled body provides a higher resistance to spin out when installed in soft materials. • Inch body • Inch and metric threads

metric thread (unit

CLOSED END

L HD ± .015 ±.010 ±.015* .420 .310 inches .470 .310 .420 .310 L HD .470 .310 ± .015 ±.010 ±.015* .475 .340 .420 .310 .585 .340 .470 .310 .475 .340 .420 .310 .585 .340 .470 .310 .580 .455 .475 .340 .680 .455 .585 .340 .580 .455 .475 .340 .680 .455 .585 .340 .690 .595* .580 .455 .805 .595* .680 .455 .690 .595* .580 .455 .805 .595* .680 .455 .690 .595* .690 .595* .805 .595* .805 .595* .690 .595* .690 .595* .805 .595* .805 .595* .690 .595* .805 .595* .690 .595* .805 .595*

)

HT ± .002 .019 .019 .019 HT .019 ± .002 .019 .019 .019 .019 .019 .019 .019 .019 .022 .019 .022 .019 .022 .019 .022 .019 .022 .022 .022 .022 .022 .022 .022 .022 .022 .022 .022 .022 .022 .022 .022 .022 .022 .022 .022 .022

D Max. .265 .265 .265 D .265 Max. .296 .265 .296 .265 .296 .265 .296 .265 .390 .296 .390 .296 .390 .296 .390 .296 .530 .390 .530 .390 .530 .390 .530 .390 .530 .530 .530 .530 .530 .530 .530 .530 .530 .530 .530 .530

IL Max. .305 .305 .305 IL .305 Max. .315 .305 .315 .305 .315 .305 .315 .305 .380 .315 .380 .315 .380 .315 .380 .315 .470 .380 .425 .380 .470 .380 .425 .380 .470 .470 .425 .425 .470 .470 .425 .425 .470 .425 .470 .425

LB ± .015 .740 .740 .740 LB .740 ± .015 .990 .740 .990 .740 .990 .740 .990 .740 1.190 .990 1.190 .990 1.190 .990 1.190 .990 1.390 1.190 1.390 1.190 1.390 1.190 1.390 1.190 1.390 1.390 1.390 1.390 1.390 1.390 1.390 1.390 1.390 1.390 1.390 1.390

ILB Max. .640 .580 .640 ILB .580 Max. .845 .640 .735 .580 .845 .640 .735 .580 1.005 .845 .905 .735 1.005 .845 .905 .735 1.175 1.005 1.025 .905 1.175 1.005 1.025 .905 1.175 1.175 1.025 1.025 1.175 1.175 1.025 1.025 1.175 1.025 1.175 1.025

ITD Ref. .610 .670 .610 ITD .670 Ref. .730 .610 .840 .670 .730 .610 .840 .670 .895 .730 1.035 .840 .895 .730 1.035 .840 .995 .895 1.120 1.035 .995 .895 1.120 1.035 .995 .995 1.120 1.120 .995 .995 1.120 1.120 .995 1.120 .995 1.120

Hole Size +.006/-.000 .266 .266 .266 Hole Size .266 +.006/-.000 .297 .266 .297 .266 .297 .266 .297 .266 .391 .297 .391 .297 .391 .297 .391 .297 .531 .391 .531 .391 .531 .391 .531 .391 .531 .531 .531 .531 .531 .531 .531 .531 .531 .531 .531 .531

- millimeters)

L HD HT D IL LB ILB ITD Hole Size Part Number Thread Size Grip Range (Steel) Min. Max. ± .38 ±.25 ±.38* ± .05 Max. Max. ± .38 Max. Ref. +.15/-.000 CAK2-470-2.0 M4x0.7 ISO 0.50 2.00 10.67 7.87 0.48 6.73 7.75 18.80 16.26 15.49 6.75 CAK2-470-3.3 M4x0.7 ISO 2.00 3.30 11.94 7.87 0.48 6.73 7.75 18.80 14.73 17.02 6.75 CAK2-580-3.3 M5x0.8 ISO 0.50 3.30 12.07 8.64 0.48 7.52 8.00 25.15 21.46 18.54 7.60 L HD HT D IL LB ILB ITD Hole Size Part Number Thread Size Grip Range CAK2-580-5.7 M5x0.8 ISO 3.30 5.70 14.86 8.64 0.48 7.52 8.00 25.15 18.67 21.34 7.60 (Steel) Min. Max. ± .38 ±.25 ±.38* ± .05 Max. Max. ± .38 Max. Ref. +.15/-.000 CAK2-610-4.2 M6x1.0 ISO 0.70 4.20 14.73 11.56 0.55 9.91 9.65 30.23 25.53 22.73 10.00 CAK2-470-2.0 M4x0.7 ISO 0.50 2.00 10.67 7.87 0.48 6.73 7.75 18.80 16.26 15.49 6.75 CAK2-610-6.6 M6x1.0 ISO 4.20 6.60 17.27 11.56 0.55 9.91 9.65 30.23 22.99 26.29 10.00 CAK2-470-3.3 M4x0.7 ISO 7.87 0.48 6.73 7.75 18.80 6.75 CAK2-8125-3.8 M8x1.25 ISO 2.00 0.70 3.30 3.80 11.94 17.53 15.11* 0.55 13.46 11.94 35.31 14.73 29.85 17.02 25.27 13.50 CAK2-580-3.3 M5x0.8 ISO 8.64 0.48 7.52 8.00 25.15 7.60 CAK2-8125-7.9 M8x1.25 ISO 0.50 3.80 3.30 7.90 12.07 20.45 15.11* 0.55 13.46 10.80 35.31 21.46 26.04 18.54 28.45 13.50 CAK2-580-5.7 ♦ M10x1.5 M5x0.8 ISO 8.64 0.48 7.52 8.00 25.15 7.60 CAK2-1015-3.8 ISO 3.30 0.70 5.70 3.80 14.86 17.53 15.11* 0.55 13.46 11.94 35.31 18.67 29.85 21.34 25.27 13.50 CAK2-610-4.2 ♦ M10x1.5 M6x1.0 ISO 11.56 0.55 9.91 9.65 30.23 10.00 CAK2-1015-7.9 ISO 0.70 3.80 4.20 7.90 14.73 20.45 15.11* 0.55 13.46 10.80 35.31 25.53 26.04 22.73 28.45 13.50 CAK2-610-6.6 M6x1.0 ISO 4.20 6.60 17.27 11.56 0.55 9.91 9.65 30.23 22.99 26.29 10.00 CAK2-8125-3.8 M8x1.25 ISO 0.70 3.80 17.53 required 15.11* 0.55 13.46 35.31for 29.85 25.27 13.50 ♦ Non-Standard Part: Minimum order quantity after depletion of stock. Please 11.94 contact Sherex current availability. CAK2-8125-7.9 M8x1.25 ISO 3.80 7.90 20.45 15.11* 0.55 13.46 10.80 35.31 26.04 28.45 13.50 CAK2-1015-3.8♦ M10x1.5 ISO 0.70 3.80 17.53 15.11* 0.55 13.46 11.94 35.31 29.85 25.27 13.50 part numbering system CAK2-1015-7.9♦ M10x1.5 ISO 3.80 7.90 20.45 15.11* 0.55 13.46 10.80 35.31 26.04 28.45 13.50

CAK Specifications Material: Steel 1008/1010 Stainless Steel 302* Aluminum 5056

Part Number Example: CAK2-2520-165

RoHS Compliant Finishes: Zinc Plated-Yellow Trivalent Chromate per Sherex SFS-01-001, SC2 Zinc Plated-Clear Trivalent Chromate per Sherex SFS-01-001

CAK Product Style Small Flange Knurled Body Thin Wall Series

2 Material 1-Stainless Steel 2-Steel 3-Aluminum

2520 Thread Size

165 Grip Range

(_) Empty-Open End B-Closed End T-Clear Trivalent

Special finish or material available upon request

*Contact Sherex for exact product dimensions in Stainless Steel. Grip range can be affected by parent material and hole size. Sherex recommends trial installations to determine the proper grip range for the application. Contact Sherex for details. CAK style rivet nuts are available in closed end designs. Other specials available upon request. Contact Sherex for test data. Mating material holes must be smaller than flange diameter. INSTALLATION TOOLING CAK Series can be installed with our Hand Tools, Pneumatic Tools, and Hydro-Pneumatic Tools. For additional tooling information see pages 39-44.

Sherex rivet nuts are compatible with the following hardware: GRADE 2, GRADE 5, CLASS 8.8 and CLASS 9.8 Please contact Sherex when using other grade fasteners.

Sherex Fastening Solutions

•

866-474-3739

•

www.sherex.com

•

info@sherex.com

CAL LARGE FLANGE KNURLED BODY THIN WALL SERIES OPEN END

Part Number Thread Size (Steel) CAL2-0632-080 6-32 UNC CAL2-0632-130 6-32 UNC CAL2-0832-080 thread 8-32 UNC unified CAL2-0832-130 8-32 UNC Part Number Thread Size CAL2-1024-130 10-24 UNC (Steel) CAL2-1024-225 10-24 UNC CAL2-1032-130 10-32UNC UNF CAL2-0632-080 6-32 CAL2-1032-225 10-32UNC UNF CAL2-0632-130 6-32 CAL2-2520-165 1/4-20 UNC CAL2-0832-080 8-32 UNC CAL2-2520-260 1/4-20 UNC CAL2-0832-130 8-32 UNC CAL2-2528-165 1/4-28UNC UNF CAL2-1024-130 10-24 CAL2-2528-260 1/4-28UNC UNF CAL2-1024-225 10-24 CAL2-3118-150 5/16-18 UNC CAL2-1032-130 10-32 UNF CAL2-3118-312 5/16-18 UNC CAL2-1032-225 10-32 UNF CAL2-3124-150 5/16-24UNC UNF CAL2-2520-165 1/4-20 CAL2-3124-312♦ 1/4-20 5/16-24UNC UNF CAL2-2520-260 CAL2-3716-150 3/8-16 UNF UNC CAL2-2528-165 1/4-28 CAL2-3716-312 3/8-16 UNF UNC CAL2-2528-260 1/4-28 CAL2-3724-150 3/8-24 UNC UNF CAL2-3118-150 5/16-18 CAL2-3724-312♦ 5/16-18 3/8-24 UNC UNF CAL2-3118-312 CAL2-5013-200 1/2-13 UNC CAL2-3124-150 5/16-24 UNF CAL2-5013-350 1/2-13 UNC CAL2-3124-312♦ 5/16-24 UNF CAL2-3716-150 3/8-16 UNC CAL2-3716-312 3/8-16 UNC CAL2-3724-150 3/8-24 UNF CAL2-3724-312♦ 3/8-24 UNF CAL2-5013-200 1/2-13 UNC CAL2-5013-350 1/2-13 UNC

CLOSED END

Grip Range Min. Max. .020 .080 .080 .130 .020 .080 unit .080 .130 Grip .020 Range .130 .130 .225 Min. Max. .020 .130 .020 .080 .130 .225 .080 .130 .027 .165 .020 .080 .165 .260 .080 .130 .027 .165 .020 .130 .165 .260 .130 .225 .027 .150 .020 .130 .150 .312 .130 .225 .027 .150 .027 .165 .150 .312 .165 .260 .027 .150 .027 .165 .150 .312 .165 .260 .027 .150 .027 .150 .150 .312 .150 .312 .063 .200 .027 .150 .200 .350 .150 .312 .027 .150 .150 .312 .027 .150 .150 .312 .063 .200 .200 .350

(

metric thread (unit

L HD HT ± .015 ±.010 ±.025* ± .003 .420 .390 .030 .470 .390 .030 .420 .390 .030 inches .470 .390 .030 L HD HT .475 .415 .030 ± .585 .015 ±.010.415 ±.025* ± .030 .003 .475 .415 .030 .420 .390 .030 .585 .415 .030 .470 .390 .030 .580 .500 .030 .420 .390 .030 .680 .500 .030 .470 .390 .030 .580 .500 .030 .475 .415 .030 .680 .500 .030 .585 .415 .030 .690 .685* .035 .475 .415 .030 .805 .685* .035 .585 .415 .030 .690 .685* .035 .580 .500 .030 .805 .685* .035 .680 .500 .030 .690 .685* .035 .580 .500 .030 .805 .685* .035 .680 .500 .030 .690 .685* .035 .690 .685* .035 .805 .685* .035 .805 .685* .035 1.150 .865* .047 .690 .685* .035 1.300 .865* .047 .805 .685* .035 .690 .685* .035 .805 .685* .035 .690 .685* .035 .805 .685* .035 1.150 .865* .047 1.300 .865* .047

)

D Max. .265 .265 .265 .265 D .296 .296 Max. .296 .265 .296 .265 .390 .265 .390 .265 .390 .296 .390 .296 .530 .296 .530 .296 .530 .390 .530 .390 .530 .390 .530 .390 .530 .530 .530 .530 .685 .530 .685 .530 .530 .530 .530 .530 .685 .685

IL Max. .305 .305 .305 .305 IL .315 .315 Max. .315 .305 .315 .305 .380 .305 .380 .305 .380 .315 .380 .315 .470 .315 .425 .315 .470 .380 .425 .380 .470 .380 .425 .380 .470 .470 .425 .425 .850 .470 .850 .425 .470 .425 .470 .425 .850 .850

LB ± .015 .740 .740 .740 .740 LB .990 ± .990 .015 .990 .740 .990 .740 1.190 .740 1.190 .740 1.190 .990 1.190 .990 1.390 .990 1.390 .990 1.390 1.190 1.390 1.190 1.390 1.190 1.390 1.190 1.390 1.390 1.390 1.390 2.365 1.390 2.365 1.390 1.390 1.390 1.390 1.390 2.365 2.365

ILB Max. .640 .580 .640 .580 ILB .845 .735 Max. .845 .640 .735 .580 1.005 .640 .905 .580 1.005 .845 .905 .735 1.175 .845 1.025 .735 1.175 1.005 1.025 .905 1.175 1.005 1.025 .905 1.175 1.175 1.025 1.025 2.070 1.175 1.920 1.025 1.175 1.025 1.175 1.025 2.070 1.920

ITD Ref. .610 .670 .610 .670 ITD .730 .840 Ref. .730 .610 .840 .670 .895 .610 1.035 .670 .895 .730 1.035 .840 .995 .730 1.120 .840 .995 .895 1.120 1.035 .995 .895 1.120 1.035 .995 .995 1.120 1.120 1.505 .995 1.505 1.120 .995 1.120 .995 1.120 1.505 1.505

Hole Size +.006/-.000 .266 .266 .266 .266 Hole Size .297 .297 +.006/-.000 .297 .266 .297 .266 .391 .266 .391 .266 .391 .297 .391 .297 .531 .297 .531 .297 .531 .391 .531 .391 .531 .391 .531 .391 .531 .531 .531 .531 .688 .531 .688 .531 .531 .531 .531 .531 .688 .688

• Knurled body provides a higher resistance to spin out when installed in soft materials. • Inch body • Inch and metric threads

- millimeters)

Part Number Thread Size Grip Range L HD HT D IL LB ILB ITD Hole Size (Steel) Min. Max. ± .38 ±.25 ±.64* ± .08 Max. Max. ± .38 Max. Ref. +.15/-.000 6.75 CAL2-470-2.0 M4x0.7 ISO 0.50 2.00 10.68 9.91 0.76 6.73 7.75 18.80 16.26 15.49 CAL2-470-3.3 M4x0.7 ISO 2.00 3.30 11.94 9.91 0.76 6.73 7.75 18.80 14.73 17.02 6.75 7.60 CAL2-580-3.3 M5x0.8 ISO 0.50 3.30 12.07 10.54 0.76 7.52 8.00 25.15 21.46 18.54 CAL2-580-5.7 M5x0.8 ISO 3.30 5.70 14.86 10.54 0.76 7.52 8.00 25.15 18.67 21.34 7.60 Part Number Thread Grip L HD HT D IL LB ILB ITD Hole Size CAL2-610-4.2 M6x1.0Size ISO 0.70 Range 4.20 14.73 12.70 0.76 9.91 9.65 30.23 25.53 22.73 10.00 (Steel) CAL2-610-6.6 M6x1.0 ISO 4.20 6.60 9.91 9.65 22.99 26.29 10.00 Min. Max. ±17.27 .38 ±.2512.70 ±.64* ±0.76 .08 Max. Max. ±30.23 .38 Max. Ref. +.15/-.000 CAL2-8125-3.8 M8x1.25ISO ISO 0.70 3.80 17.53 17.40* 0.89 13.46 11.94 35.31 16.26 29.85 15.49 25.27 13.50 CAL2-470-2.0 M4x0.7 0.50 2.00 10.68 9.91 0.76 6.73 7.75 18.80 6.75 CAL2-8125-7.9 M8x1.25ISO ISO 3.80 7.90 20.45 17.40* 0.89 13.46 10.80 35.31 14.73 26.04 17.02 28.45 13.50 CAL2-470-3.3 M4x0.7 2.00 3.30 11.94 9.91 0.76 6.73 7.75 18.80 6.75 CAL2-1015-3.8 M10x1.5ISO ISO 0.70 3.80 17.53 17.40* 0.89 13.46 8.00 11.94 25.15 35.31 21.46 29.85 18.54 25.27 13.50 CAL2-580-3.3 M5x0.8 0.50 3.30 12.07 10.54 0.76 7.52 7.60 CAL2-1015-7.9 M10x1.5ISO ISO 3.80 7.90 20.45 17.40* 0.89 13.46 8.00 10.80 25.15 35.31 18.67 26.04 21.34 28.45 13.50 CAL2-580-5.7 M5x0.8 3.30 5.70 14.86 10.54 0.76 7.52 7.60 CAL2-12175-5.1 M12x1.75 ISO 0.70 1.60 5.10 29.21 21.97* 1.19 17.40 9.65 21.59 30.23 60.07 25.53 52.58 22.73 38.23 17.45 CAL2-610-4.2 M6x1.0 ISO 4.20 14.73 12.70 0.76 9.91 10.00 ISO 4.20 5.10 8.90 33.02 21.97* 1.19 17.40 9.65 21.59 30.23 60.07 22.99 48.77 26.29 38.23 17.45 CAL2-12175-8.9 CAL2-610-6.6 ♦ M12x1.75 M6x1.0 ISO 6.60 17.27 12.70 0.76 9.91 10.00 CAL2-8125-3.8 M8x1.25 ISO 0.70 3.80 17.53 17.40* 0.89 13.46 11.94 35.31 29.85 25.27 13.50 ♦ Non-Standard Part: Minimum order quantity required after depletion of stock. Please contact Sherex for current availability. CAL2-8125-7.9 M8x1.25 ISO 3.80 7.90 20.45 17.40* 0.89 13.46 10.80 35.31 26.04 28.45 13.50 CAL2-1015-3.8 M10x1.5 ISO 0.70 3.80 17.53 17.40* 0.89 13.46 11.94 35.31 29.85 25.27 13.50 part numbering system CAL2-1015-7.9 M10x1.5 ISO 3.80 7.90 20.45 17.40* 0.89 13.46 10.80 35.31 26.04 28.45 13.50 CAL2-12175-5.1 M12x1.75 ISO 1.60 5.10 29.21 21.97* 1.19 17.40 21.59 60.07 52.58 38.23 17.45 CAL Specifications Number 21.97* ♦ M12x1.75 ISO 5.10 8.90 Part33.02 1.19 17.40 21.59 60.07 48.77 38.23 17.45 CAL2-12175-8.9

Material: Steel 1008/1010 Stainless Steel 302* Aluminum 5056

• The CAL series has a large flange to provide increased strength in punched and drilled holes.

CLOSED END

Example: CAL2-2520-165

RoHS Compliant Finishes: Zinc Plated-Yellow Trivalent Chromate per Sherex SFS-01-001, SC2 Zinc Plated-Clear Trivalent Chromate per Sherex SFS-01-001

CAL Product Style Large Flange Knurled Body Thin Wall Series

2 Material 1-Stainless Steel 2-Steel 3-Aluminum

2520 Thread Size

165 Grip Range

(_) Empty-Open End B-Closed End T-Clear Trivalent W-Wedge Head S-Sealed

WEDGE HEAD

Special finish or material available upon request

*Contact Sherex for exact product dimensions in Stainless Steel. Grip range can be affected by parent material and hole size. Sherex recommends trial installations to determine the proper grip range for the application. Contact Sherex for details. CAL style rivet nuts are available in sealed, closed end, and wedge head designs by special order. Other specials available upon request. Contact Sherex for test data. INSTALLATION TOOLING CAL Series can be installed with our Hand Tools, Pneumatic Tools, and Hydro-Pneumatic Tools. For additional tooling information see pages 39-44. Sherex rivet nuts are compatible with the following hardware: GRADE 2, GRADE 5, CLASS 8.8 and CLASS 9.8 Please contact Sherex when using other grade fasteners.

Sherex Fastening Solutions

•

866-474-3739

•

www.sherex.com

•

info@sherex.com

SEALED HEAD

CFT/CAT KNURLED 3600 SWAGING SERIES

Recommended Hole Size +.005/-.00 Part Number (Steel)

Thread Size

Cadmium Free & RoHS Compliant

HD ± .005

L ± .015

D Max.

CAT2-0632 CAT2-0832 CAT2-1024 Part Number CAT2-1032 (Steel) CAT2-2520 CAT2-0440 CAT2-3118 CAT2-0632 CAT2-3716 CAT2-0832 CAT2-5013 CAT2-1024 CAT2-1032 CFT2-0440 CAT2-2520 CFT2-0632 CAT2-3118 CFT2-0832 CAT2-3716 CFT2-1024 CAT2-5013 CFT2-1032 CFT2-2520 CFT2-0440 CFT2-3118 CFT2-0632 CFT2-3716 CFT2-0832 CFT2-5013 CFT2-1024 CFT2-1032 CFT2-2520 CFT2-3118 CFT2-3716 CFT2-5013

6-32 UNC 8-32 UNC 10-24 UNC Thread Size 10-32 UNF 1/4-20 UNC 4-40 UNC 5/16-18 UNC 6-32 UNC 3/8-16 UNC 8-32 UNC 1/2-13 UNC 10-24 UNC 10-32 UNF 4-40 UNC 1/4-20 UNC 6-32 UNC 5/16-18 UNC 8-32 UNC 3/8-16 UNC 10-24 UNC 1/2-13 UNC 10-32 UNF 1/4-20 UNC 4-40 UNC 5/16-18 UNC 6-32 UNC 3/8-16 UNC 8-32 UNC 1/2-13 UNC 10-24 UNC 10-32 UNF 1/4-20 UNC 5/16-18 UNC 3/8-16 UNC 1/2-13 UNC

N N Cadmium N Free & N RoHS Compliant N N N N N N Y N Y N Y N Y N Y Y Y Y Y Y Y Y Y Y Y

.240 .269 .306 HD .306 ± .005 .400 .211 .528 .240 .588 .269 .800 .306 .306 .211 .400 .240 .528 .269 .588 .306 .800 .306 .400 .211 .528 .240 .588 .269 .800 .306 .306 .400 .528 .588 .800

.370 .370 .370 .370 L .370 ± .015 .515 .370 .615 .370 .745 .370 .935 .370 .370 .370 .515 .370 .615 .370 .745 .370 .935 .370 .515 .370 .615 .370 .745 .370 .935 .370 .370 .515 .615 .745 .935

.1875 .2185 .2495 .2805 D .2805 Max. .3745 .1875 .4995 .2185 .5615 .2495 .7485 .2805 .2805 .1875 .3745 .2185 .4995 .2495 .5615 .2805 .7485 .2805 .3745 .1875 .4995 .2185 .5615 .2495 .7485 .2805 .2805 .3745 .4995 .5615 .7485

unified thread CAT2-0440 4-40 UNC (unitN- inches .211 )

• The CFT/CAT series offers one rivet nut for materials of any thickness greater than .030 inches. • Cadmium Free finish allows the CFT Series to be used in any industry, including automotive. • Designed to be used in metal applications.

metric thread (unit

• Inch body

Part Number (Steel)

• Inch and metric threads

CAT2-350♦ CAT2-470♦ CAT2-580♦ CAT2-610 Part Number CAT2-8125 (Steel) ♦ CAT2-1015♦ CAT2-350♦♦ CAT2-12175 CAT2-470♦ CAT2-580 ♦ CFT2-350♦ CAT2-610 CFT2-470♦ CAT2-8125 CFT2-580 ♦ CAT2-1015 CFT2-610 ♦ CAT2-12175 CFT2-8125 ♦

MAT. THICK .030-.090

MAT. THICK .091-.124

MAT. THICK .125-.186

MAT. THICK .187-Over

.1875 .1935 .1935 .1960 .2188 .2210 .2280 .2280 Hole Size +.005/-.00 .2656 .2500 Recommended .2570 .2656 .2812 .2900 .2900 .2969 MAT. THICK MAT. THICK MAT. THICK MAT. THICK .2812 .2900 .2900 .2969 .030-.090 .091-.124 .125-.186 .187-Over .3750 .3750 .3860 .3906 .1875 .1935 .1935 .1960 .5000 .5000 .5156 .5156 .2188 .2210 .2280 .2280 .5625 .5625 .5781 .5781 .2500 .2570 .2656 .2656 .7500 .7656 .7810 .7970 .2812 .2900 .2900 .2969 .2900 .2969 .2812 .2900 .1875 .1935 .1935 .1960 .3860 .3906 .3750 .3750 .2188 .2210 .2280 .2280 .5000 .5000 .5156 .5156 .2500 .2570 .2656 .2656 .5625 .5625 .5781 .5781 .2812 .2900 .2900 .2969 .7810 .7500 .7656 .7970 .2812 .2900 .2900 .2969 .3750 .3750 .3860 .3906 .1875 .1935 .1960 .1935 .5000 .5000 .5156 .5156 .2188 .2210 .2280 .2280 .5625 .5625 .5781 .5781 .2656 .2500 .2570 .2656 .7500 .7656 .7810 .7970 .2969 .2812 .2900 .2900 .2812 .2900 .2969 .2900 .3750 .3750 .3906 .3860 .5000 .5000 .5156 .5156 .5625 .5625 .5781 .5781 .7500 .7656 .7810 .7970

- millimeters) Recommended Hole Size +.13/-.00

Thread Size

Cadmium Free & RoHS Compliant

HD ± .13

L ± .38

D Max.

MAT. THICK 0.76-2.29

M3X0.5 ISO M4X0.7 ISO M5X0.8 ISO M6X1.0 ISO Thread M8X1.25Size ISO M10X1.5 ISO M3X0.5 ISO M12X1.75 ISO M4X0.7 ISO M5X0.8 M3X0.5 ISO ISO M6X1.0 M4X0.7 ISO ISO M8X1.25 ISO M5X0.8 ISO M10X1.5 ISO M6X1.0 ISO M12X1.75 ISO M8X1.25 ISO

N N N Cadmium N Free & N RoHS Compliant N N N N N Y N Y N Y N Y N Y

5.36 6.83 7.77 10.16 HD 13.41 ± .13 14.94 5.36 20.32 6.83 7.77 5.36 10.16 6.83 13.41 7.77 14.94 10.16 20.32 13.41

9.40 9.40 9.40 13.08 L 15.62 ± .38 18.92 9.40 23.75 9.40 9.40 9.40 13.08 9.40 15.62 9.40 18.92 13.08 23.75 15.62

4.76 6.34 7.12 9.51 D 12.69 Max. 14.26 4.76 19.01 6.34 7.12 4.76 9.51 6.34 12.69 7.12 14.26 9.51 19.01 12.69

4.75 4.90 4.90 4.97 6.35 6.52 6.74 6.74 Recommended Hole Size 7.36+.13/-.00 7.54 7.14 7.36 9.80 MAT.9.52 THICK MAT.9.52 THICK MAT. THICK MAT.9.92 THICK 12.70 12.70 13.09 13.09 0.76-2.29 2.31-3.15 3.17-4.72 4.72-Over 14.28 14.28 14.68 14.68 4.75 4.90 4.90 4.97 19.05 19.44 19.83 20.24 6.35 6.52 6.74 6.74 7.36 7.54 7.14 7.36 4.90 4.97 4.75 4.90 9.52 9.52 9.80 9.92 6.35 6.52 6.74 6.74 12.70 12.70 13.09 13.09 7.14 7.36 7.36 7.54 14.28 14.28 14.68 14.68 9.52 9.52 9.80 9.92 19.05 19.44 19.83 20.24 12.70 12.70 13.09 13.09

MAT. THICK 2.31-3.15

MAT. THICK 3.17-4.72

MAT. THICK 4.72-Over

CFT2-1015 M10X1.5 ISO Y 14.94 18.92 14.26 14.28 14.28 14.68 4.90 M3X0.5 ISO Y 5.36 9.40 4.76 4.75 4.90 CFT2-350♦♦ CFT2-12175 M12X1.75 ISO Y 20.32 23.75 19.01 19.05 19.44 19.83 CFT2-470♦ M4X0.7 ISO Y 6.83 9.40 6.34 6.35 6.52 6.74 CFT2-580 M5X0.8 ISO Y quantity required 7.77 after depletion 9.40 7.12 7.14contact Sherex 7.36 for current availability. 7.36 ♦ Non-Standard Part: Minimum order of stock. Please CFT2-610 M6X1.0 ISO Y 10.16 13.08 9.51 9.52 9.52 9.80 CFT2-8125 M8X1.25 ISO Y 13.41 15.62 12.69 12.70 12.70 13.09 part numbering system CFT2-1015 M10X1.5 ISO Y 14.94 18.92 14.26 14.28 14.28 14.68 CFT2-12175♦ M12X1.75 ISO Y 20.32 23.75 19.01 19.05 19.44 19.83

CFT/CAT Specifications Material: Stainless Steel, 304 L Steel, 12L14 Steel, 1215

14.68 4.97 20.24 6.74 7.54 9.92 13.09 14.68 20.24

Part Number Example: CAT2-2520 CAT Cadmium T series Featuring 3600 Swaging

Finish:

CAT is Cadmium Plated per QQ-P-416 Type 1, Class 3 with clear protective coating

CFT is Proprietary Tin Plated

2 Material 1-Stainless Steel 2-Steel

2520 Thread Size

Special finish or material available upon request

*CFT and CAT rivet nut styles are dimensionally the same. CFT is Cadmium Free and RoHS Compliant. Actual hole size can be affected by parent material and material thickness. Contact Sherex for details. CFT/CAT series available in different finishes. Other specials available upon request. Contact Sherex for test data. Mating material holes must be smaller than flange diameter. INSTALLATION TOOLING CFT/CAT Series can be installed with our Hand Tools, Pneumatic Tools, and Hydro-Pneumatic Tools. For additional tooling information see pages 39-44. Sherex rivet nuts are compatible with the following hardware: GRADE 2, GRADE 5, CLASS 8.8 and CLASS 9.8 Please contact Sherex when using other grade fasteners.

CFT Stainless Steel (CFT1) products are now produced in our Sherex Akron facility, and are available with reduced lead times! Sherex Fastening Solutions

•

866-474-3739

•

www.sherex.com

•

info@sherex.com

CFW/CAW DIAMOND KNURLED 3600 SWAGING SERIES

Part Number (Steel)

Thread Size

CAW2-0632♦ CAW2-0832 Part Number CAW2-1024 (Steel) CAW2-1032 CAW2-0632 CAW2-2520♦ CAW2-0832 CAW2-3118 CAW2-1024 CAW2-3716♦ CAW2-1032 CAW2-2520 CFW2-0632♦ CAW2-3118 CFW2-0832 CAW2-3716 CFW2-1024♦ CFW2-1032 CFW2-0632 CFW2-2520♦ CFW2-0832 CFW2-3118♦ CFW2-1024 CFW2-3716♦ CFW2-1032 CFW2-2520 CFW2-3118♦ CFW2-3716♦

6-32 UNC 8-32 UNC Thread Size 10-24 UNC 10-32 UNF 6-32 UNC 1/4-20 UNC 8-32 UNC 5/16-18 UNC 10-24 UNC 3/8-16 UNC 10-32 UNF 1/4-20 UNC 6-32 UNC 5/16-18 UNC 8-32 UNC 3/8-16 10-24 UNC 10-32 UNF 6-32 UNC 1/4-20 UNC 8-32 UNC 5/16-18 UNC 10-24 UNC 3/8-16 UNC 10-32 UNF 1/4-20 UNC 5/16-18 UNC 3/8-16 UNC

unified thread (unit

metric thread (unit Part Number (Steel)

Thread Size

Cadmium Free & RoHS Compliant

HD ± .005

L ± .015

D Max.

Hole Size +.005/-.00

N Cadmium N Free & N RoHS Compliant N N N N N N N N NY NY NY Y YY YY YY Y Y Y Y

.255 .285 HD ±.320 .005 .320 .255 .415 .285 .550 .320 .615 .320 .415 .255 .550 .285 .615 .320 .320 .255 .415 .285 .550 .320 .615 .320 .415 .550 .615

.370 .370 L ±.370 .015 .370 .370 .515 .370 .615 .370 .740 .370 .515 .370 .615 .370 .740 .370 .370 .370 .515 .370 .615 .370 .740 .370 .515 .615 .740

.233 .264 D .295 Max. .295 .233 .389 .264 .528 .295 .590 .295 .389 .233 .528 .264 .590 .295 .295 .233 .389 .264 .528 .295 .590 .295 .389 .528 .590

.234 .266 Hole Size .297 +.005/-.00 .297 .234 .391 .266 .531 .297 .594 .297 .391 .234 .531 .266 .594 .297 .297 .234 .391 .266 .531 .297 .594 .297 .391 .531 .594

- inches)

- millimeters) Cadmium Free & RoHS Compliant

HD ± .13

L ± .38

D Max.

Hole Size +.13/-.00

M4X0.7 ISO N 7.24 CAW2-470♦ 9.40 6.71 6.75 Cadmium M5X0.8 ISO N Free 8.13 9.40 7.50 7.54 CAW2-580♦ Part Number HD L D Hole Size & Thread M6X1.0 Size ISO N 10.54 CAW2-610♦ 13.08 9.88 9.92 RoHS Compliant (Steel) ± .13 ± .38 Max. +.13/-.00 M8X1.25 ISO N 13.97 15.62 13.41 13.49 CAW2-8125♦ M4X0.7 ISO N 7.24 CAW2-470♦♦ 9.40 6.71 6.75 M10X1.5 ISO N 15.62 CAW2-1015 18.80 14.99 15.00 M5X0.8 ISO N 8.13 9.40 7.50 7.54 CAW2-580♦ M6X1.0 NY 10.54 CAW2-610 13.08 9.88 9.92 M4X0.7 ISO ISO 7.24 9.40 6.71 6.75 CFW2-470♦♦ M8X1.25 NY 13.97 15.62 13.41 13.49 CAW2-8125 CFW2-580♦♦ 9.40 7.50 7.54 M5X0.8 ISO 8.13 M10X1.5 NY 15.62 CAW2-1015 18.80 14.99 15.00 CFW2-610 ♦ M6X1.0 ISO 10.54 13.08 9.88 9.92 M8X1.25 ISO Y 13.97 15.62 13.41 13.49 CFW2-8125♦ CFW2-1015 M10X1.5 ISO 15.62 18.80 14.99 15.00 M4X0.7 ISO YY 7.24 9.40 6.71 6.75 CFW2-470♦♦ CFW2-580♦ 9.40 7.50 7.54 M5X0.8 ISO Y 8.13 ♦ Non-Standard Part: Minimum order quantity required after depletion of stock. Please contact Sherex for current availability. CFW2-610 M6X1.0 ISO Y 10.54 13.08 9.88 9.92 M8X1.25 ISO Y 13.97 15.62 13.41 13.49 CFW2-8125♦ part numbering system CFW2-1015 ♦ M10X1.5 ISO Y 15.62 18.80 14.99 15.00 CFW/CAW Specifications Material: Stainless Steel, 304 L Steel, 12L14 Steel, 1215

• The CFW/CAW series offers a knurled body for increased spin out resistance in soft materials. • Increased wall thickness provides increased shear strength. • Cadmium Free finish allows the CFW Series to be used in any industry, including automotive. • Inch body • Inch and metric threads

Part Number Example: CAW2-2520 2 Material 1-Stainless Steel 2-Steel

CAW Cadmium W series Featuring 3600 Swaging

Finish:

CAW is Cadmium Plated per QQ-P-416 Type 1, Class 3 with clear protective coating

CFW is Proprietary Tin Plated

2520 Thread Size

Special finish or material available upon request

*CFW and CAW rivet nut styles are dimensionally the same. CFW is Cadmium Free and RoHS Compliant. Actual hole size can be affected by parent material and material thickness. Contact Sherex for details. CFW/CAW series available in different finishes. Other specials available upon request. Contact Sherex for test data. Mating material holes must be smaller than flange diameter. INSTALLATION TOOLING CFW/CAW Series can be installed with our Hand Tools, Pneumatic Tools, and Hydro-Pneumatic Tools. For additional tooling information see pages 39-44. Sherex rivet nuts are compatible with the following hardware: GRADE 2, GRADE 5, CLASS 8.8 and CLASS 9.8 Please contact Sherex when using other grade fasteners.

Sherex Fastening Solutions

•

866-474-3739

•

www.sherex.com

•

info@sherex.com

RIV-FLOAT®

STANDARD RIVET NUT INSTALLED

CROSS SECTION OF RIV-FLOAT® INSTALLED

features and benefits

• The RIV-FLOAT® series provides easy, accurate, and fast attachment of components in off-center applications.

• Accounts for tolerance stack up in joint design and misalignment during service of the joint. • Floating nut aligns to drive angle of screw virtually eliminating cross threading and spin out. • Allows for installation in post painted or powder coat applications where riveted nut plates or cage nuts are typically used. • RoHS compliant Zinc electroplate to 8µm with trivalentchromate - 96/240 hrs (WR/RR). • Designed with higher thread strength than regular rivet nuts. • Mechanically locked RIV-FLOAT® is available with prevailing torque feature to IFI spec 100/107. GR HT

• Inch body HD

• Inch and metric threads

INSTALLED

UNINSTALLED

rfk small flange series (unit Part Number InchNumber (Steel) Part InchNumber (Steel) Part RFK2-0632-130 InchNumber (Steel) Part RFK2-0632-130 RFK2-0832-130 Inch (Steel) RFK2-1032-150 RFK2-0832-130 RFK2-0632-130 RFK2-2520-150 RFK2-1032-150 RFK2-0632-130 RFK2-0832-130

Grip Range

Radial

Thread Size

Grip Range Min. Max. Grip Range Min. Max. Grip Range .027 .130 Min. Max. .027 .130 .027 .130 Min. Max. .027 .150 .027 .130 .027 .150 .027 .150 .130 .027

Deflection Radial

Thread Size

Deflection Radial .020 Deflection Radial .020 .020 Deflection .015 .020 .030 .015 .020

6-32 UNC Thread Size Thread Size 6-32 UNC UNC 8-32 10-32 UNF 8-32 UNC 6-32 1/4-20 UNC 10-32 UNF 6-32 8-32 UNC

RFK2-1032-150 10-32 UNF .015 .027 RFK2-0832-130 8-32 UNC .020 rfk small flange series (unit

CENTERING NOSEPIECE

• The RIV-FLOAT series should be installed with the FLEX-5 Hydro Pneumatic Tool with a RIV-FLOAT®Anvil. ®

RFK2-2520-150

1/4-20 UNC

.030

RFK2-2520-150 RFK2-1032-150 Part Number RFK2-2520-150 Metric (Steel) Part Number

1/4-20 UNC 10-32 UNF Thread Size 1/4-20 UNC

.030 .015 Radial .030 Deflection Radial

Thread M4x0.7 Size ISO Thread M5X0.8 ISO M4x0.7 Size M6x1.0 M5X0.8 ISO ISO M4x0.7 ISO

Deflection Radial .51 Deflection Radial .38 .51 Deflection .76 .38 .51

RFK2-610-3.8 RFK2-580-3.8 RFK2-470-3.3

M6x1.0 ISO ISO M5X0.8 M4x0.7

.76 .38 .51

RFK2-610-3.8 RFK2-580-3.8

M6x1.0 ISO M5X0.8

.76 .38

RFK2-610-3.8 M6x1.0 ISO rfl large flange Part Number Thread Size InchNumber (Steel) Part Thread Size InchNumber (Steel) Part Thread Size RFL2-0632-130 6-32 UNC Part InchNumber (Steel) Thread Size RFL2-0632-130 6-32 UNC RFL2-0832-130 8-32 UNC Inch (Steel) RFL2-0832-130 8-32 UNC RFL2-0632-130 6-32 RFL2-1032-150 10-32 UNF RFL2-0632-130 6-32 UNC RFL2-0832-130 8-32 RFL2-1032-150 10-32 UNF RFL2-2520-150 1/4-20 UNC

RFL2-0832-130 8-32 UNC RFL2-1032-150 10-32 UNF RFL2-2520-150 1/4-20 UNC RFL2-1032-150 10-32 UNF RFL2-2520-150 1/4-20 UNC Part Number RFL2-2520-150 1/4-20 UNC Thread Size rfl large flange Metric (Steel) Part Number Thread Size Metric (Steel) Part Number Thread RFL2-470-3.3 M4x0.7 Size ISO Part Number Metric (Steel) Thread RFL2-470-3.3 M4x0.7 Size ISO RFL2-580-3.8 M5x0.8 ISO Metric (Steel)

Min. Max. Grip Range Min. Max. Grip Range .027 .130 Min. Max. .027 .130 .027 .130 Min. Max. .027 .130 .027 .150

.020 .015 .030 .020 .015 .030

.027 .027 .027 .027

.015 .030 Radial .030 series Deflection Radial Deflection Radial .51 Radial Deflection

RFL2-580-3.8 RFL2-610-3.8 RFL2-610-3.8

M5x0.8 M6x1.0 ISO ISO M6x1.0 ISO

.38 .76 .76

HD ± .010 HD ± .010 HD .455 ± .010 .455 .455 ± .010 .455 .455 .595 .455

HT ± .002 HT ± .002 HT .022 ± .002 .022 .022 ± .002 .022 .022 .022 .022 .022

D Max. D Max. D .390 Max. .390 .390 Max. .390 .390 .530 .390

IL Ref. IL Ref. IL .522 Ref. .522 .522 Ref. .522 .522 .630 .522

Hole Size +.006/-.000 Hole Size +.006/-.000 Hole Size .391 +.006/-.000 .391 .391 +.006/-.000 .391 .391 .531 .391

.022 .022 HT .022

.530 .390 D .530 .390

.630 .522 IL .630 .522

HT .022 ± .05 HT ± .05 HT .55 ± .05 .55 .55 ± .05 .55 .55 .55

D .530 Max. D Max. D 9.91 Max. 9.91 9.91 Max. 13.46 9.91 9.91

IL .630 Ref. IL Ref. IL 13.25 Ref. 13.25 13.25 Ref. 16.00 13.25 13.25

.531 .391 Hole Size .531 .391 Hole Size .531 +.15/-.000 Hole Size +.15/-.000 Hole Size 10.00 +.15/-.000 10.00 10.00 +.15/-.000 13.50 10.00 10.00

.130 .150 .150 .130 .150

15.11 11.56

.55 .55

13.46 9.91

16.00 13.25

13.50 10.00

20.80 18.28

15.11 11.56

.55

13.46 9.91

16.00 13.25

20.80 L

15.11 HD

.55 HT

13.46 D

16.00 IL

13.50 10.00 13.50 Hole Size

± .0215 L ± .0215 L .7195 ± .0215 .7195 .7195 ± .0215 .7195 .7195

HD ± .010 HD ± .010 HD .500 ± .010 .500 .500 ± .010 .500 .500

HT ± .003 HT ± .003 HT .030 ± .003 .030 .030 ± .003 .030 .030

D Max. D Max. D .390 Max. .390 .390 Max. .390 .390

IL Ref. IL Ref. IL .522 Ref. .522 .522 Ref. .522 .522

.7195 .8190 .7195 .7195 .8190

.500 .685 .500 .500 .685

.030 .035 .030 .030 .035

.390 .530 .390 .390 .530

.522 .630 .522 .522 .630

.030 .035 HT .035 HT ± .08 HT ± .08 HT ±.76 .08 .76 ±.76 .08 .76 .89 .76 .76 .89

.390 .530 D .530 D Max. D Max. D 9.91 Max. 9.91 9.91 Max. 9.91 13.46 9.91 9.91 13.46

.522 .630 IL .630 IL Ref. IL Ref. IL 13.25 Ref. 13.25 13.25 Ref. 13.25 16.00 13.25 13.25 16.00

.76 .89 .89

9.91 13.46 13.46

13.25 16.00 16.00

.027 .150 .7195 .500 .027 Range .150 .8190 .685 Grip L HD .027 .150 .8190 .685 Grip Range L HD unit Min. Max.millimeters ± .55 ± .25 Grip Range L HD Min. Max. ± .55 ± .25 Grip Range L HD 0.70 3.3 18.28 12.70 Min. Max. ± .55 ± .25 0.70 3.3 18.28 12.70 0.70 3.8 18.28 12.70 Min. Max. ± .55 ± .25 0.70 3.3 18.28 12.70 3.8 3.8 20.80 17.40 0.70 3.3 18.28 12.70 0.70 3.8 18.28 12.70 20.80 17.40

(

0.70 0.70 0.70

3.8 3.8 3.8

)

Hole Size

20.80 18.28

unit - inches) (Grip Range L

Deflection Radial .020 Radial Deflection .020 .020 Deflection .020 .015

.51 .38 Deflection .51 .38 .76 .51 .38 .76

Size Thread Thread Size # 8-32 UNC Size 8-32 UNC ##10-32 UNF

0.70 3.8 3.8 0.70 3.3 3.8 0.70 0.70 Range 3.8 Grip

Deflection Radial

M4x0.7 M5x0.8 ISO M6x1.0 M4x0.7 ISO M5x0.8 M6x1.0 ISO

L L ± .0215 L ± .0215 L .7195 ± .0215 .7195 .7195 ± .0215 .7195 .7195 .8190 .7195

.027 .150 .8190 .595 .150 .7195 .130 .455 millimeters L HD Grip Range .8190 .595 .027 .150 .7195 .455 L HD Grip Range .027 .150 .8190 .595 Min. Max. ± .55 ± .25 L HD Grip Range Min. Max. ± .55 ± .25 L HD Grip Range 0.70 3.3 18.28 11.56 Min. Max. ± .55 ± .25 3.8 18.28 11.56 0.70 0.70 3.3 18.28 11.56 Min. Max. ± .55 ± .25 0.70 3.8 20.80 15.11 3.8 18.28 11.56 0.70 0.70 3.3 18.28 11.56

.76 series Radial

RFL2-470-3.3 RFL2-580-3.8 RFL2-610-3.8 RFL2-470-3.3 RFL2-580-3.8 RFL2-610-3.8

Thread Thread Size

Thread Size

Metric (Steel) Part Number RFK2-470-3.3 Metric (Steel) Part Number RFK2-580-3.8 RFK2-470-3.3 Metric (Steel) RFK2-610-3.8 RFK2-580-3.8 RFK2-470-3.3

- inches)

18.28 20.80 20.80

12.70 17.40 17.40

)

Hole Size +.006/-.000 Hole Size +.006/-.000 Hole Size .391 +.006/-.000 .391 .391 +.006/-.000 .391 .391 .391 .531 .391 .391 .531 .391 .531 Hole Size .531 Hole Size +.15/-.000 Hole Size +.15/-.000 Hole Size 10.00 +.15/-.000 10.00 10.00 +.15/-.000 10.00 13.50 10.00 10.00 13.50 10.00 13.50 13.50

Suggested Suggested Failure Mode Failure Mode Assembly Torque RIV-FLOAT is covered under USTorque PatentOut No. 7,713,011 Pull Out Failure Mode Failure Mode Assembly (Pull Out) (Torque Out) GradeTorque 5 Suggested Thickness Pull Out Torque Out (Steel) Material (Pull Out) (TorqueMode Out) Grade 5 Suggested Class 8.8 Failure Mode Failure Assembly Torque (Steel) Material Thickness Pull Out Torque Out Class 8.8 Failure Mode Failure Mode Assembly Torque (Pull Out) (Torque Out) Grade 5 Sherex Fastening Solutions 866-474-3739 www.sherex.com info@sherex.com • • • Thickness Pull Out Torque Out (Steel) .130" 2205 lbf Bolt Breaks 71 in-lb Bolt Breaks 22.0 in-lb (Pull Out) (Torque Out) Grade 5 Class 8.8 (Steel) .130" 2205 lbf lbf Bolt Breaks Breaks 71 in-lb Bolt Breaks Breaks 22.0 in-lb in-lb .150" 3530 Bolt 128 in-lb Bolt 36.0 Class 8.8 Material Material Thickness

GRIP RANGE GRIP RANGE RANGE GRIP

CROSS SECTION OF RIV-FLOAT® - SHORT Installed GRIP RANGE

RIV-FLOAT® - SHORT Installed

CROSS SECTION RIV-FLOAT®-SHORT Installed CROSS SECTION OFOFRIV-FLOAT - SHORT Installed ®

RIV-FLOAT -SHORT

Uninstalled Uninstalled Uninstalled Standard Rivet Nut Installed Uninstalled

Installed Installed Cross Section of aInstalled Standard Rivet Nut Installed Installed

RFSK SERIES - SMALL rfsk inch thread small flange seriesFLANGE (unit - inches) Part Number

Thread Size

RFSK SERIES SERIES SMALL FLANGE Sherex rivet nuts are compatible with the following hardware: RFSK -- SMALL FLANGE L 5, CLASS HD 8.8 and HT Grip Range GRADE 2, GRADE CLASS 9.8D RFSK SERIES - SMALL FLANGE Please contact Sherex L when using HD other grade HT fasteners. D Grip Range

Hole Size CENTERING

Radial

NOSEPIECE

IL Hole Size Float Radial L HD HT D IL Hole Size Grip Range Radial Thread Size M in. M ax . ± .01 ± .012 ± .003 M ax . R ef. +.006/ -.000 Thread Size Float L HD HT D IL Hole Size Grip Range Float Radial M in.® - SHORT M ax . is ± .01 ± .012 .003 M ax . Rtool ef. +.006/ -.000 RIV-FLOAT installed with Flex-5±±.025 Hydro-Pneumatic 8-32 UNC 0.020 .020 .394 .246 .433 Thread Size M in. M.100 ax . ± .01 ± .480 .012 .003 M.431 ax . R ef. +.006/ -.000 Float ® - SHORT Anvil with RIV-FLOAT Inch - Steel ♦ RFSK2-1024-100 10-24 UNC 0.020 .020 .100 .431 .246 .433 RFSK2-0832-100 ♦ 8-32 UNC 0.020 .020 .100 .394 .480 .025 .431 .246 .433 M in. M ax . ±.394 .01 ±.480 .012 ±.025 .003 M ax . R ef. +.006/ -.000 RFSK2-0832-100♦ 8-32 UNC 0.020 .020 .100 .394 .480 .025 .431 .246 .433 10-32 0.020 .020 .100 .394 .480 .025 .431 .246 .433 RFSK2-1032-100 RFSK2-1024-100♦ ♦ 10-24 UNF UNC 0.020 .020 .100 .394 .480 .025 .431 .246 .433 Sherex Fastening Solutions • 400 Riverwalk Pkwy, Suite 600 • Tonawanda, NY 14150.431 • Phone:.246 866-474-3739 • www.sherex.com • The RIV-FLOAT® - Short RFSK2-1024-100 ♦ 10-24 0.020 .020 .100 .394 .480 .025 .433 RFSK2-0832-100 ♦ 8-32 UNC 0.020 .020 .100 .394 .480 .025 .431 .246 .433 Cross Section ♦ of a Standard 10-32 UNF 0.020 .020 .100 .394 .480 .025 .431 .246 .433 RFSK2-1032-100 Rivet ♦♦Nut Installed 10-32 0.020 .020 .100 .394 .480 .025 .431 .246 .433 RFSK2-1032-100 RFSK2-1024-100 10-24 UNF UNC 0.020 .020 .100 .394 .480 .025 .431 .246 .433 series provides easy, rfsk metric thread small flange series unit millimeters SHEREX L HD HT D IL Hole Size Grip ♦ 10-32 UNF 0.020 .020 Range .100 .394 .480 .025 .431 .246 .433 RFSK2-1032-100 accurate, and fast Radial Part Number compatible with the following hardware: Thread Size SHEREX attachment of L HD HT D IL Hole Size Grip Range Float CENTERINGGrip Range SHEREX Radial L HD HT D IL Hole Size ADE 5, CLASS 8.8Metric and CLASS 9.8 - Steel Radial Part Number Thread Size M ax . ± .25 ± .30 ± .07 M ax . R ef. +.15/ -.00 components in NOSEPIECEM in. Part Number Thread Size Float rex when using other grade fasteners. SHEREX L HD HT D IL Hole Size Grip Range Float Metric - Steel off-center applications Radial M in. M ax . ± .25 ± .30 ± .07 M ax . R ef. +.15/ -.00 Metric - Steel RFSK2-470-2.5 M4x0.7 ISO 0.50 0.50 10.00 12.20 10.95 6.25 11.00 Part Number Thread Size M in. M2.50 ax . ± .25 ± .30 ± .63 .07 M ax . R ef. +.15/ -.00 with a shorter body. Float Metric Steel RFSK2-580-2.5 ♦ M5X0.8 ISO 0.50 0.50 2.50 10.00 12.20 .63 10.95 6.25 11.00 RFSK2-470-2.5 M4x0.7 ISO 0.50 0.50 2.50 10.00 12.20 10.95 6.25 11.00 M in. M ax . ± .25 ± .30 ±.63 .07 M ax . R ef. +.15/ -.00 stalled with Flex-5 Hydro-Pneumatic M4x0.7 tool RFSK2-470-2.5 ISO 0.50 0.50 2.50 10.00 12.20 .63 10.95 6.25 11.00 RFSK2-580-2.5 ♦ M5X0.8 ISO 0.50 0.50 2.50 10.00 12.20 .63 10.95 6.25 11.00 V-FLOAT® - SHORT Anvil • Inch body RFSK2-580-2.5 M5X0.8 0.50 0.50 2.50 10.00 12.20 .63 10.95 6.25 11.00 RFSK2-470-2.5♦ M4x0.7 ISO ISO 0.50 0.50 2.50 10.00 12.20 .63 10.95 6.25 11.00 InchNumber - Steel Part Part Number Inch - Steel InchNumber - Steel ♦ RFSK2-0832-100 Part

(

RFSL SERIES FLANGE 2.50 - LARGE 10.00 12.20 .63

RFSK2-580-2.5 ISO 0.50 0.50 e 600 • Tonawanda, NY 14150 •♦Phone: M5X0.8 866-474-3739 • www.sherex.com

)

Part Number

Thread Size

InchNumber - Steel Part Part Number Inch - Steel InchNumber - Steel RFSL2-0832-100 Part

Thread Size Thread Size

Inch - Steel RFSL2-1024-100 RFSL2-0832-100 RFSL2-0832-100 RFSL2-1032-100 RFSL2-1024-100 RFSL2-1024-100 RFSL2-0832-100 RFSL2-1032-100 RFSL2-1032-100 RFSL2-1024-100

10-24 UNC 8-32 UNC 8-32 UNC 10-32 10-24 UNF UNC 10-24 8-32 UNC 10-32 UNF 10-32 10-24 UNF UNC

RFSL2-1032-100

10-32 UNF

8-32 UNC Thread Size

Grip Range

6.25

11.00

Hole Size

RFSL SERIES - LARGE FLANGE L HD HT Grip Range

Float Radial Radial Float Float Radial 0.020 Float 0.020 0.020 0.020 0.020 0.020 0.020 0.020 0.020 0.020 0.020

Grip Range M in. M ax . Grip Range M in. M ax . .020 M in. M.100 ax .

L ± .01 L ± .01 ±.406 .01

HD ± .015 HD ± .015 ± .555 .015

HT ± .003 HT ± .003 ± .033 .003

D D M ax . D M ax . M.431 ax .

IL IL R ef. IL R ef. .246 R ef.

Hole Size Hole Size +.006/ -.000 Hole Size +.006/ -.000 .433 +.006/ -.000

.020 .020 M in. .020 .020 .020 .020 .020 .020 .020 .020

.100 .100 M ax . .100 .100 .100 .100 .100 .100 .100 .100

.406 ±.406 .01 .406 .406 .406 .406 .406 .406 .406 .406

.555 ±.555 .015 .555 .555 .555 .555 .555 .555 .555 .555

.033 ±.033 .003 .033 .033 .033 .033 .033 .033 .033 .033

.431 .431 M ax . .431 .431 .431 .431 .431 .431 .431 .431

.246 .246 R ef. .246 .246 .246 .246 .246 .246 .246 .246

.433 .433 +.006/ -.000 .433 .433 .433 .433 .433 .433 .433 .433

0.020

Grip .020 Range .100

L .406

HD .555

HT .033

D .431

IL .246

Hole Size .433

Grip Range Grip Range M in. M ax . Grip Range M in. M ax . 0.50 M in. M2.50 ax . 0.50 2.50 0.50 2.50 M in. M ax . 0.50 2.50 0.50 2.50 0.50 2.50 0.50 2.50

L L ± .30 L ± .30 10.30 ± .30 10.30 10.30 ± .30 10.30 10.30 10.30 10.30

HD HD ± .38 HD ± .38 14.10 ± .38 14.10 14.10 ± .38 14.10 14.10 14.10 14.10

HT ± .08 HT ± .08 ± .85 .08 .85 ±.85 .08 .85 .85 .85 .85

D M ax . D M ax . 10.95 M ax . 10.95 10.95 M ax . 10.95 10.95 10.95 10.95

IL R ef. IL R ef. 6.25 R ef. 6.25 6.25 R ef. 6.25 6.25 6.25 6.25

Hole Size +.15/ -.00 Hole Size +.15/ -.00 11.00 +.15/ -.00 11.00 11.00 +.15/ -.00 11.00 11.00 11.00 11.00

0.50

10.30

14.10

.85

10.95

6.25

11.00

Radial rfsl metricThread thread large flange series (unit Part Number Size Metric - Steel Part Number Part Number Metric - Steel Metric - Steel RFSL2-470-2.5 Part Number

Thread Size Thread Size

Metric - Steel RFSL2-580-2.5 RFSL2-470-2.5 RFSL2-470-2.5 RFSL2-580-2.5 RFSL2-580-2.5 RFSL2-470-2.5

M5x0.8 M4x0.7 ISO ISO M4x0.7 ISO M5x0.8 ISO M5x0.8 M4x0.7 ISO ISO

Float Radial Radial Float Float Radial 0.50 Float 0.50 0.50 0.50 0.50 0.50 0.50

RFSL2-580-2.5

M5x0.8 ISO

0.50

M4x0.7 ISO Thread Size

RFSK2-0832-1 RFSK2-0832-1 RFSK2-1032-1 RFSK2-0832-1 RFSK2-1032-1 RFSK2-1032-1 RFSK2-1032-1

10.95

RFSL SERIES SERIES -- LARGE LARGE FLANGE FLANGE rfsl inch thread large flange series (unit - inches) RFSL Radial

SHEREX AERO SHEREX AER PART NUM SHEREX AERO SHEREX AER PART NUM NUM PART PART NUM RFSK2-0832-1

2.50

-HTmillimeters )Hole Size D IL

• Inch and metric threads

Prints and Tech Prints and andatTech Tech are Prints available ww Prints andatTech are available ww are available at ww are available at ww Patent Pen Patent Pen Pen Patent Patent Pen

Sherex Fastening Solutions • 400 Riverwalk Pkwy, Suite 600 • Tonawanda, NY 14150 • Phone: 866-474-3739 ♦ Non-Standard Part: Minimum order quantity required after depletion of stock. Please contact Sherex for current availability. Sherex Fastening Fastening Solutions Solutions •• 400 400 Riverwalk Riverwalk Pkwy, Pkwy, Suite Suite 600 600 •• Tonawanda, Tonawanda, NY NY 14150 14150 •• Phone: Phone: 866-474-3739 866-474-3739 Sherex ® CENTERING RIV-FLOAT -SHORT Riveted Nut Plates vs.600 Cage Nuts Sherex Fastening Solutions • 400vs.Riverwalk Pkwy, Suite • Tonawanda, NY 14150 • Phone: 866-474-3739 Riv-Float® Short Rivet Nuts are an ideal replacement in applications where Riveted Nut Plates or Cage Nuts are being used: they require fewer holes and installation is quicker and can be done with access to only one side of the work piece.

Riv-Float® Short

Riveted Nut Plate

1 round hole

3 holes (1 for plate, 2 for the rivets)

1 square hole

Access to work piece

One side

Both sides

Installation Time

2 - 3 seconds

Hole

15 - 20 seconds

NOSEPIECE

Cage Nut

15 - 20 seconds

• The RIV-FLOAT® - Short series should be installed with the FLEX-5 Hydro Pneumatic Tool with a RIV-FLOAT® - Short Anvil.

Riveted Nut Plate RIV-FLOAT®-SHORT Cage Nut

RIV-FLOAT® Short is covered under U.S. Patent No. 9,309,914 Sherex Fastening Solutions • 866-474-3739 • www.sherex.com • info@sherex.com

.185

NAS/MS FLAT HEAD STYLES

When using a pull to stroke installation tool use the following equations to determine approximate stroke distance: 1. (rivet nut max grip) – (actual base material thickness) = (“X”) 2. (“X”) + (pull up factor) = Stroke Distance

Note for Material

MS/NAS FLAT HEAD STYLES *Note: part numbers reflect steel, open-end, non-keyed, with cadmium yellow plating only. Please refer to part numbering system outline for further configurations.

DFARS

Compliant to DFARS 252.225-7009

Produced in our AS9100 Certified manufacturing facility in Akron, Ohio.

unified thread (unit

UNIFIED THREAD (UNIT-INCHES) THREAD SIZE

ØB +/.015

- inches) INSTALL HOLE SIZE

KEYWAY DIMENSIONS

Spreadsheet FLAT HEAD COMMON MIN MAX C ØD INSTALL E F Spreadsheet FLAT HEAD NOT COMMON NOM +.000/-.004 DRILL SIZE MAX +.005/-.000

G MAX

(REF)

P +.003/-.000

*PULL UP FACTOR

.055 .065 .065 .080 .095

PART NUMBERING SYSTEM

.120 .155

PART NUMBERING SYSTEM

.185

part numbering system

Example: SXS2528-80CY SX CLASSIFICATION Sherex PART STANDARD NAS Part

MS27130

S 2528 (_) 80 CYCLASSIFICATION CLASSIFICATION PART STANDARD

PART STANDARD

CLASSIFICATION Material (_) - Open Ended Grip Range CY-Cadmium Yellow MS27130 Thread Size NAS1329 STANDARD S-Steel Non KeyedPART Ending in 0 or 5 ZY-Zinc Yellow A-Aluminum B-Closed End denotes Flat Head ML-Mechanical Lock SS- 430 Stainless Steel K-Keyed NM- 316 Stainless R-Ribbed Ending in 1 or 6 (Non-Magnetic) denotes Countersunk Sherex Fastening Solutions, LLC ~ 400 Riverwalk Pkwy, Suite 600 ~ Tonawanda, NY, 14150 ~ 866-4SHEREX ~ www.sherex.com Head CH-Alloy Steel B-Brass

MS/NAS FLAT HEAD STYLES

NAS1329

MS/NAS COUNTERSUNK HEAD STYLES

Sherex Fastening Solutions, LLC ~ 400 Riverwalk Pkwy, Suite 600 ~ Tonawanda, NY, 14150 ~ 866-4SHEREX ~ www.sherex.com

PROUDLY MADE IN THE USA

SHEREX FASTENING SOLUTIONS®

CLASSIFICATION PART STANDARD 7EK30

Compliant to DFARS 252.225-7009

CLASSIFICATION PART STANDARD 4JQL4

Sherex Fastening Solutions

•

866-474-3739

•

www.sherex.com

•

info@sherex.com

1. 2.

(rivet nut max grip) – (actual base material thickness) = (“X”) (“X”) + (pull up factor) = Stroke Distance

Note for Material *Note: part numbers reflect steel, open-end, non-keyed, with cadmium yellow plating only. Please refer to part numbering system outline for further configurations.

DFARS

NAS/MS FLAT HEAD STYLES

Compliant to DFARS 252.225-7009

unified thread (unit THREAD SIZE PART NUMBER*

THREAD SIZE

SXS4-60CY SXS4-85CY SXS4-110CY SXS4-135CY SXS4-160CY SXS4-185CY SXS6-75CY SXS6-120CY SXS6-160CY SXS6-200CY SXS6-240CY SXS6-280CY SXS8-75CY SXS8-120CY SXS8-160CY SXS8-200CY SXS8-240CY SXS8-280CY SXS1024-80CY SXS10-80CY SXS10-130CY SXS10-180CY SXS10-230CY SXS10-280CY SXS10-330CY

#4-‐40 UNC-‐3B

#6-‐32 UNC-‐3B

#8-‐32 UNC-‐3B

#10-‐32 UNF -‐3B 10-24 UNC-3B #10/24 UNC-‐3B 10-32 UNF-3B

GRIP RANGE

- inches)

IDENTITIFYING

OPEN END END KEYED KEYED A ND OPEN AND KEYLESS KEYLESS

CLOSED END KEYLESS

CLOSED END KEYED

CLOSED END KEYLESS

CLOSED END KEYED

MARK GRIP RANGESpreadsheet IDENTIFYING FLAT HEAD NOT COMMON MARK

A M L J K L +/-‐ A M L J K L +/+/-‐ .015 REF +/-‐ .015 NOM NOM .015 +/- .015 REF +/- .015 NOM NOM .015

.010-‐.060 .060-‐.085 .085-‐.110 .110-‐.135 .135-‐.160 .160-‐.185 .010-‐.075 .075-‐.120 .120-‐.160 .160-‐.200 .200-‐.240 .240-‐.280 .010-‐.075 .075-‐.120 .120-‐.160 .160-‐.200 .200-‐.240 .240-‐.280

BLANK 1 RAD 2 RAD 3 RAD 4 RAD 5 RAD 1 RAD 3 RAD 5 RAD 1 CIRC 2 CIRC 3 CIRC PART 1 RAD 3 RAD 5 RAD 1 CIRC 2 CIRC 3 CIRC

0.345 0.230 0.500 0.370 0.230 0.525 0.400 0.230 0.555 0.425 0.230 0.580 0.450 0.230 0.605 0.480 0.230 0.635 0.438 0.300 0.625 0.500 0.315 0.625 0.500 0.270 0.750 0.562 0.290 0.750 0.625 0.310 0.750 0.687 0.330 0.812 NUMBERING SYSTEM 0.438 0.300 0.625 0.500 0.315 0.625 0.500 0.270 0.750 0.625 0.350 0.750 0.625 0.305 0.875 0.687 0.340 0.875

.010-‐.080

BLANK

0.531

0.380

.080-‐.130 .130-‐.180 .180-‐.230 .230-‐.280 .280-‐.330

1 RAD 2 RAD 3 RAD 4 RAD 5 RAD

0.594 0.641 0.703 0.750 0.797

0.390 0.390 0.395 0.395 0.385

J K J K NOM NOM NOM NOM

0.385 0.385 0.390 0.385 0.385 0.385 0.490 0.440 0.520 0.480 0.435 0.455 0.490 0.440 0.520 0.475 0.555 0.530

0.230 0.230 0.230 0.230 0.230 0.230 0.305 0.255 0.260 0.260 0.260 0.265 0.305 0.255 0.260 0.265 0.310 0.290

0.500 0.525 0.555 0.580 0.605 0.635 0.750 0.750 0.750 0.750 0.750 0.812 0.750 0.750 0.750 0.750 0.875 0.875

0.385 0.385 0.390 0.385 0.385 0.385 0.615 0.565 0.520 0.480 0.435 0.455 0.615 0.565 0.520 0.475 0.555 0.530

0.230 0.230 0.230 0.230 0.230 0.230 0.405 0.355 0.310 0.260 0.260 0.265 0.405 0.355 0.310 0.265 0.310 0.290

0.781

0.630

0.380

0.781

0.630

0.380

0.843 0.891 0.953 1.000 1.047

0.640 0.640 0.645 0.645 0.630

0.390 0.390 0.395 0.395 0.385

0.843 0.891 0.953 1.000 1.047

0.640 0.640 0.645 0.645 0.630

0.390 0.390 0.395 0.395 0.385

1/4-‐20 U NC-‐3B 1/4-28 UNF-3B SXS2528-80CY .020-‐.080 BLANK 0.625 0.450 0.937 0.760 0.440 0.937 0.760 SXS25-80CY 1/4-20 1/4-‐28 UNC-3B UNF-‐3B CLASSIFICATION CLASSIFICATION SXS25-140CY .080-‐.140 1 RAD 0.687 0.450 1.000 0.760 0.440 1.000 0.760 PART1.062 STANDARD SXS25-200CYPART STANDARD .140-‐.200 2 RAD 0.750 0.450 1.062 0.760 0.440 0.760 SXS25-260CY .200-‐.260 3 RAD 0.812 0.445 1.125 0.755 0.445 1.125 0.755 SXS25-320CY .260-‐.320 4 RAD 0.875 0.445 1.187 0.755 0.445 1.187 0.755 SXS25-380CY .320-‐.380 5 RAD 0.937 0.445 1.250 0.755 0.445 1.250 0.755 5/16-‐18 U NC-‐3B UNF-3B SXS3124-125CY 5/16-24 .030-‐.125 BLANK 0.750 0.505 1.187 0.940 0.550 1.187 0.940 SXS31-125CY 5/16-18 5/16-‐24 UNC-3B UNF-‐3B SXS31-200CY .125-‐.200 1 RAD 0.875 0.555 1.281 0.960 0.555 1.281 0.960 SXS31-275CY .200-‐.275 2 RAD 0.937 0.540 1.343 0.950 0.560 1.343 0.950 SXS31-350CY .275-‐.350 3 RAD 1.032 0.560 1.437 0.965 0.570 1.437 0.965 SXS31-425CY .350-‐.425 4 RAD 1.125 0.580 1.531 0.985 0.575 1.531 0.985 SXS31-500CY .425-‐.500 5 RAD 1.187 0.565 1.593 0.975 0.580 1.593 0.975 3/8-‐16 U NC-‐3B UNF-3B SXS3724-115CY 3/8-24 .030-‐.115 BLANK 0.844 0.585 1.281 1.020 0.660 1.281 1.020 SXS37-115CY 3/8-16 3/8-‐24 UNC-3B UNF-‐3B SXS37-200CY .115-‐.200 ADRiverwalk Pkwy, 0.938 1.375 1.030 1.375 1.030 Sherex Fastening Solutions, LLC 1 ~R 400 Suite 600 0.595 ~ Tonawanda, NY, 14150 ~ 866-4SHEREX ~ 0.670 www.sherex.com SXS37-285CY .200-‐.285 2 RAD 1.031 0.605 1.468 1.040 0.680 1.468 1.040 SXS37-370CY .285-‐.370 3 RAD 1.125 0.615 1.562 1.050 0.690 1.562 1.050 SXS37-455CY .370-‐.455 4 RAD 1.218 0.630 1.656 1.065 0.710 1.656 1.065 SXS37-540CY .455-‐.540 5 RAD 1.312 0.635 1.750 1.075 0.715 1.750 1.075 1/2-‐13 U NC-‐3B 1/2-20 UNF-3B SXS5020-150CY .050-‐.150 BLANK 0.906 0.605 1.328 1.030 0.605 1.328 1.030 SXS50-150CY 1/2-13 1/2-‐20 UNC-3B UNF-‐3B SXS50-250CY .150-‐.250 1 RAD 1.031 0.630 1.453 1.055 0.630 1.453 1.055 SXS50-350CY .250-‐.350 2 RAD 1.141 0.640 1.562 1.060 0.640 1.562 1.060 SXS50-450CY .350-‐.450 3 RAD 1.250 0.650 1.671 1.070 0.650 1.671 1.070

NAS1329

MS27130

MS/NAS COUNTERSUNK HEAD STYLES

Produced in our AS9100 Certified manufacturing facility in Akron, Ohio.

0.440 0.440 0.440 0.445 0.445 0.445 0.550 0.555 0.560 0.570 0.575 0.580 0.660 0.670 0.680 0.690 0.710 0.715 0.605 0.630 0.640 0.650

*Note: Part numbers reflect steel, open-end, non-keyed, with cadmium yellow plating only. Please refer to part numbering system outlined on page 26 for further configurations.

Sherex Fastening Solutions

•

866-474-3739

•

www.sherex.com

•

info@sherex.com

NAS/MS COUNTERSUNK STYLES MS/NAS FLAT HEAD STYLES

Produced in our AS9100 Certified manufacturing facility in Akron, Ohio.

unified thread (unit

UNIFIED THREAD (UNIT-INCHES) THREAD SIZE

ØB +/.015

- inches) INSTALL HOLE SIZE Spreadsheet FLAT HEAD COMMON

C NOM

ØD +.000/-.004

INSTALL DRILL SIZE (REF)

MIN

MAX

E MAX

Spreadsheet COUNTERSUNK HEAD NOT COMMON

F +.005/-.000

KEYWAY DIMENSIONS G MAX

P +.003/-.000

*PULL UP FACTOR

.055 .065 .065 .080

PART NUMBERING SYSTEM

.095 .120 .155 .185

PART NUMBERING SYSTEM

CLASSIFICATION part numbering system PART STANDARD

Example: SXS2528-80CY CLASSIFICATION PART STANDARD

MS27130

CLASSIFICATION PART STANDARD 2528 (_) 80

MS/NAS FLAT HEAD STYLES

Sherex

Material

MS27130

CLASSIFICATION PART STANDARD

NAS1330

NAS1329

Sherex Fastening SuiteEnded 600 ~ Tonawanda, NY,Range 14150 ~ 866-4SHEREX CY-Cadmium ~ www.sherex.com ThreadSolutions, Size LLC ~ 400 Riverwalk (_) -Pkwy, Open Grip

NAS Part S-Steel FLEX-5 HYDRO-PNEUMATIC TOOL A-Aluminum SS- 430 Stainless Steel NM- 316 Stainless (Non-Magnetic) CH-Alloy Steel B-Brass

Non Keyed B-Closed End K-Keyed R-Ribbed

Ending in 0 or 5 denotes Flat Head

Yellow ZY-Zinc Yellow ML-Mechanical Lock

Ending in 1 or 6 denotes Countersunk Head

Sherex Fastening Solutions, LLC ~ 400 Riverwalk Pkwy, Suite 600 ~ Tonawanda, NY, 14150 ~ 866-4SHEREX ~ www.sherex.com

PROUDLY MADE IN THE USA

SHEREX FASTENING SOLUTIONS®

CLASSIFICATION PART STANDARD 7EK30

Compliant to DFARS 252.225-7009

CLASSIFICATION PART STANDARD 4JQL4

Sherex Fastening Solutions

•

866-474-3739

•

www.sherex.com

•

info@sherex.com

NAS/MS COUNTERSUNK STYLES

UNIFIED THREAD (UNIT-INCHES) unified thread THREAD SIZE

PART NUMBER*

THREAD SIZE

SXS4-81CY SXS4-106CY SXS4-131CY SXS4-156CY SXS4-181CY SXS4-206CY SXS6-106CY SXS6-161CY SXS6-201CY SXS6-241CY SXS6-281CY SXS6-321CY SXS8-106CY SXS8-161CY SXS8-201CY SXS8-241CY SXS8-281CY SXS8-321CY SXS1024-116CY SXS10-116CY SXS10-166CY SXS10-216CY SXS10-266CY SXS10-316CY SXS10-366CY

#4-‐40 UNC-‐3B

(unit - inches)

GRIP RANGE

#6-‐32 UNC-‐3B

#8-‐32 UNC-‐3B

#10-24 #10-‐32 UNC-3B UNF -‐3B #10-‐24 U NC-‐3B #10-32 UNF-3B

Spreadsheet

OPEN END KEYED AND KEYLESS

CLOSED END KEYLESS

CLOSED END KEYED

OPEN END KEYED CLOSED END KEYLESS CLOSED END KEYED AND KEYLESS A M L J K L +/J K REF M +/ L .015 NOM J NOM K L .015 +/-‐ NOM J NOM K +/- A .015 +/-‐ .015 REF +/-‐ .015 NOM NOM .015 NOM NOM COUNTERSUNK HEAD NOT COMMON 0.370 0.235 0.525 0.390 0.235 0.525 0.390 0.235 0.395 0.235 0.550 0.390 0.235 0.550 0.390 0.235 0.420 0.235 0.575 0.390 0.235 0.575 0.390 0.235 0.450 0.235 0.600 0.390 0.235 0.600 0.390 0.235 0.475 0.235 0.625 0.390 0.235 0.625 0.390 0.235 0.500 0.235 0.650 0.390 0.235 0.650 0.390 0.235 0.500 0.325 0.687 0.510 0.325 0.812 0.635 0.425 0.500 0.280 0.687 0.465 0.280 0.812 0.590 0.380 0.562 0.295 0.687 0.420 0.260 0.812 0.545 0.335 0.625 0.315 0.812 0.505 0.295 0.812 0.505 0.295 0.625 0.270 0.812 0.465 0.265 0.812 0.465 0.265 0.687 0.290 0.844 0.455 0.265 0.844 0.455 0.265 0.500 0.325 0.687 0.510 0.325 0.812 0.635 0.425 0.500 0.280 0.687 0.465 0.280 0.812 0.590 0.380 0.562 0.290 0.687 0.415 0.255 0.812 0.540 0.330 0.625 0.310 0.875 0.560 0.290 0.875 0.560 0.290 0.687NUMBERING 0.325 0.875 0.515 0.290 0.875 0.515 0.290 PART SYSTEM 0.687 0.295 0.875 0.485 0.300 0.875 0.485 0.300

IDENTITIFYING IDENTIFYING MARK MARK

.050-‐.081 .081-‐.106 .106-‐.131 .131 -‐.156 .156-‐.181 .181-‐.206 .065-‐.106 .106-‐.161 .161-‐.201 .201-‐.241 .241-‐.281 .281-‐.321 .065-‐.106 .106-‐.161 .161-‐.201 .201-‐.241 .241-‐.281 .281-‐.321

BLANK 1 RAD 2 RAD 3 RAD 4 RAD 5 RAD BLANK 2 RAD 4 RAD 1 CIRC 2 CIRC 3 CIRC BLANK 2 RAD 4 RAD 1 CIRC 2 CIRC 3 CIRC

.065-‐.116

BLANK

0.578

0.395

0.828

0.645

0.395

0.828

0.645

0.395

.116-‐.166 .166-‐.216 .216-‐.266 .266-‐.316 .316-‐.366

1 RAD 2 RAD 3 RAD 4 RAD 5 RAD

0.625 0.687 0.734 0.781 0.844

0.385 0.400 0.390 0.385 0.400

0.875 0.938 0.984 1.031 1.094

0.635 0.650 0.640 0.635 0.650

0.385 0.400 0.390 0.385 0.400

0.875 0.938 0.984 1.031 1.094

0.635 0.650 0.640 0.635 0.650

0.385 0.400 0.390 0.385 0.400

1/4-‐20 UNF-3B UNC-‐3B 1/4-28 SXS2528-151CY .089-‐.151 BLANK 0.687 0.440 1.000 0.750 0.435 1.000 0.750 SXS25-151CY 1/4-20 1/4-‐28 UNC-3B UNF-‐3B SXS25-211CY CLASSIFICATION .151-‐.211 1 RAD 0.750 0.440 1.062 0.750 0.435 CLASSIFICATION 1.062 0.750 SXS25-271CY PART STANDARD .211-‐.271 2 RAD 0.812 0.440 1.125 0.750 0.435PART 1.125 0.750 STANDARD SXS25-331CY .271-‐.331 3 RAD 0.875 0.435 1.187 0.750 0.435 1.187 0.750 SXS25-391CY .331-‐.391 4 RAD 0.937 0.435 1.250 0.750 0.435 1.250 0.750 SXS25-451CY .391-‐.451 5 RAD 1.000 0.435 1.312 0.760 0.445 1.312 0.760 5/16-‐18 UNF-3B UNC-‐3B SXS3124-181CY 5/16-24 .106-‐.181 BLANK 0.844 0.540 1.218 0.915 0.540 1.218 0.915 SXS31-181CY 5/16-18 5/16-‐24 UNC-3B UNF-‐3B SXS31-256CY .181-‐.256 1 RAD 0.937 0.560 1.312 0.935 0.560 1.312 0.935 SXS31-331CY .256-‐.331 2 RAD 1.000 0.550 1.406 0.955 0.550 1.406 0.955 SXS31-406CY .331-‐.406 3 RAD 1.093 0.565 1.468 0.940 0.565 1.468 0.940 SXS31-481CY .406-‐.481 4 RAD 1.156 0.555 1.562 0.960 0.555 1.562 0.960 SXS31-556CY .481-‐.556 5 RAD 1.250 0.575 1.625 0.950 0.575 1.625 0.950 3/8-24 UNF-3B 3/8-‐16 U NC-‐3B SXS3724-211CY .125-‐.211 BLANK 0.938 0.580 1.375 1.020 0.655 1.375 1.020 SXS37-211CY 3/8-16 3/8-‐24 UNC-3B UNF-‐3B Sherex Fastening Solutions, LLC 400 Riverwalk 1.031 Pkwy, Suite 600 ~ Tonawanda,1.468 NY, 14150 ~ 866-4SHEREX ~ www.sherex.com SXS37-296CY .211-‐.296 1 ~RAD 0.590 1.030 0.655 1.468 1.030 SXS37-381CY .296-‐.381 2 RAD 1.125 0.600 1.562 1.040 0.675 1.562 1.040 SXS37-466CY .381-‐.466 3 RAD 1.219 0.615 1.656 1.050 0.690 1.656 1.050 SXS37-551CY .466-‐.551 4 RAD 1.312 0.625 1.750 1.065 0.705 1.750 1.065 .551-‐.636 5 RAD 1.442 0.650 1.859 1.090 0.715 1.859 1.090 SXS37-636CY 1/2-‐13 UNF-3B UNC-‐3B 1/2-20 SXS5020-226CY .125-‐.226 BLANK 0.984 0.610 1.406 1.030 0.610 1.406 1.030 SXS50-226CY 1/2-13 1/2-‐20 UNC-3B UNF-‐3B SXS50-326CY .226-‐.326 1 RAD 1.094 0.620 1.515 1.040 0.620 1.515 1.040 SXS50-426CY .326-‐.426 2 RAD 1.218 0.640 1.625 1.050 0.640 1.625 1.050 SXS50-526CY .426-‐.526 3 RAD 1.312 0.635 1.750 1.075 0.635 1.750 1.075

MS27130

NAS1330

FLEX-5 HYDRO-PNEUMATIC TOOL

Produced in our AS9100 Certified manufacturing facility in Akron, Ohio.

0.435 0.435 0.435 0.435 0.435 0.445 0.540 0.560 0.550 0.565 0.555 0.575 0.655 0.655 0.675 0.690 0.705 0.715 0.610 0.620 0.640 0.635

*Note: Part numbers reflect steel, open-end, non-keyed, with cadmium yellow plating only. Please refer to part numbering system outlined on page 28 for further configurations.

Sherex Fastening Solutions

•

866-474-3739

•

www.sherex.com

•

info@sherex.com

UPO LARGE FLANGE/UFO COUNTERSUNK FLANGE ROUND METRIC SERIES UFO SERIES

UPO SERIES

- millimeters)

upo series metric thread (unit

• The UPO series offers a large flange for increased strength and better containment of round or oversized holes. • Metric body and metric threads

Part Number Steel

Thread Size

TU-SM3UPO20ZT TU-SM3UPO30ZT TU-SM4UPO30ZT TU-SM4UPO45ZT TU-SM5UPO30ZT TU-SM5UPO55ZT TU-SM6UPO30ZT TU-SM6UPO55ZT TU-SM6UPO80ZT TU-SM8UPO30ZT TU-SM8UPO55ZT TU-SM8UPO80ZT TU-SM10UPO35ZT TU-SM10UPO60ZT TU-SM10SPO35ZT TU-SM10SPO60ZT TU-SM12UPO40ZT TU-SM12UPO70ZT

M3X0.5 ISO M3X0.5 ISO M4X0.7 ISO M4X0.7 ISO M5X0.8 ISO M5X0.8 ISO M6X1.0 ISO M6X1.0 ISO M6X1.0 ISO M8X1.25 ISO M8X1.25 ISO M8X1.25 ISO M10X1.5 ISO M10X1.5 ISO M10X1.5 ISO M10X1.5 ISO M12X1.75 ISO M12X1.75 ISO

TU-SM4UFO50ZT TU-SM5UFO40ZT TU-SM5UFO65ZT TU-SM6UFO45ZT TU-SM6UFO65ZT TU-SM8UFO45ZT TU-SM8UFO65ZT TU-SM10UFO45ZT TU-SM10UFO65ZT TU-SM12UFO45ZT TU-SM12UFO75ZT

0.5 2.0 0.5 3.0 0.5 3.0 0.5 3.0 5.5 0.5 3.0 5.5 0.8 3.5 0.8 3.5 1.0 4.0

2.0 3.0 3.0 4.5 3.0 5.5 3.0 5.5 8.0 3.0 5.5 8.0 3.5 6.0 3.5 6.0 4.0 7.0

9.8 10.8 10.8 12.3 12.0 15.0 14.5 16.5 19.0 16.0 18.5 21.5 19.8 22.8 21.0 24.0 25.0 28.0

M3X0.5 ISO M4X0.7 ISO M4X0.7 ISO M5X0.8 ISO M5X0.8 ISO M6X1.0 ISO M6X1.0 ISO M8X1.25 ISO M8X1.25 ISO M10X1.5 ISO M10X1.5 ISO M12X1.75 ISO M12X1.75 ISO

1.7 1.7 3.5 1.7 4.0 1.7 4.5 1.7 4.5 1.7 4.5 2.0 4.5

D ± 0.35

K ± 0.15

d -0.02/-0.15

Hole Size (b+0.1)

8.0

0.8

5.0

5.1

10.0

0.8

6.0

11.0

1.0

7.0

13.0

1.5

9.0

16.0

1.5

11.0

18.5

2.3

12.4

12.5

19.0

2.0

13.0

23.0

2.0

16.0

- millimeters) OL ± 0.35

D +0.00/-0.5

K +0.3/-0.05

d -0.02/-0.15

Hole Size (b+0.1)

11.25 11.5 13.0 13.0 16.0 17.0 19.0 19.0 21.0 21.0 23.0 26.0 29.0

8.0

1.5

5.0

5.1

9.0

1.5

6.0

10.0

1.5

7.0

12.0

1.5

9.0

14.0

1.5

11.0

15.4

1.5

12.4

12.5

19.0

1.8

16.0

3.5 3.5 5.0 4.0 6.5 4.5 6.5 4.5 6.5 4.5 6.5 4.5 7.5

part numbering system

Product Style Metric

RoHs Compliant Finish: Zinc Top, 96 w / 480 r UFO Specifications Material: Steel QST 34-3 Stainless Steel 304 Cu Aluminum ALMG 2.5

M5 Material Thread Size S-Steel A-Aluminum SS-304 Stainless Steel *316-316 Stainless Steel

UP O Product Type O-Open End Large Flange, Flat Head X-Closed End Metric Body

30 Grip Range

ZT Zinktop (Clear)

Part Number Example: TU-SM5UFO35ZT TU Product Style: Metric

RoHs Compliant Finish: Zinktop (Clear), 96 w / 480 r

S M5 Material Thread Size S-Steel A-Aluminum SS-304 Stainless Steel

UF O 35 ZT Product Type O-Open End Grip range Zinktop (Clear) Smooth Shank X-Closed End Countersunk Head Special finish or material available upon request Metric Body

*316 Stainless Steel has extra corrosion resistance and can be used in the medical, chemical and food industries.

Grip Range can be affected by parent material and hole size. Sherex recommends trial installations to determine the proper grip range for the application. Closed End sizes available: M4, M5, M6, and M8. Also available with imperial threads - minimum order quantity is 25,000 pieces if not in stock. Contact Sherex for test data. Mating material holes must be smaller than flange diameter. INSTALLATION TOOLING UPO and UFO Series can be installed with our Hand Tools and Hydro-Pneumatic Tools. For additional tooling information see pages 39-44.

L ± 0.35

Material: UPO Specifications Part Number Steel QST 34-3 Material Example: TU-SM5UPO30ZT Steel QSTSteel 34-3 304 Cu Stainless S Stainless Steel 3042.5 Cu TU Aluminum ALMG Stainless Steel 316 Cu Aluminum ALMG 2.5

Available with knurled shank for increased performance (KN Series).

Max.

(

TU-SM3UFO35ZT

• Metric body and metric threads

Min.

Material: ufo series metric thread unit Steel QST 34-3 Grip Range (E) Stainless 304 Cu PartSteel Number Thread Size Stainless Steel Steel 316 Cu Min. Max. Aluminum ALMG 2.5 RoHs Compliant Finish: TU-SM4UFO35ZT Zinc Top, 96 w / 480 r

• The UFO series offers a contersunk head for flush installation into the parent materials.

Grip Range (E)

All Parts have been manufactured by: TUBTARA®- A DEJOND PRODUCT

Sherex Fastening Solutions

•

866-474-3739

•

www.sherex.com

•

info@sherex.com

UKO SMALL FLANGE ROUND METRIC SERIES

uko unified thread (unit

- inches)

Grip Range (E)

Part Number (304 Stainless Steel)

Thread Size

Min.

Max.

Diameter-Inch (d)

Diameter-Metric (d)

Hole Size - Inch (b+.004)

Hole Size - Metric (b+0.1)

TU -SS1 032UKO3 0

10-32 UN F

.02 0

.11 8

.47 2

.29 5

.02 0

.27 6

7.0

.27 6

7.0

TU -SS2 520UKO3 0 TU -SS3 118UKO3 0

1/4-20 UNC 5/16-18 UNC

.02 0 .02 0

.11 8 .11 8

.57 1 .63 0

.37 4 .45 3

.02 0 .02 0

.35 4 .43 3

9.0 11.0

.35 4 .43 3

9.0 11.0

Grip Range (E)

Part Number Thread Size metric thread unit Min. (304 Stainless Steel)

(

TU -SS1 Part032HUKO30 Number

TU -SS2 520HUKO30 Steel TU -SS3 118HUKO30

10-32 UN F

Thread 1/4-20 UNC 5/16-18 UNC

TU-SM4UKO30ZT TU-SM5UKO30ZT TU-SM5UKO55ZT TU-SM6UKO30ZT TU-SM6UKO55ZT TU-SM8UKO30ZT TU-SM8UKO55ZT TU-SM10UKO35ZT

Diameter-Inch (d) (A/F)

L D K - millimeters Max. )

.02 0

Grip .29 5 .11 8Range .47 2(E)

.02 0

.11 8 Min. .11 8

Size .02 0

M4X0.7 ISO M5X0.8 ISO M5X0.8 ISO M6X1.0 ISO M6X1.0 ISO M8X1.25 ISO M8X1.25 ISO M10X1.5 ISO

0.5 0.5 3.0 0.5 3.0 0.5 3.0 0.8

.57 1 .37 4 Max. .63 0 .45 3

3.0 3.0 5.5 3.0 5.5 3.0 5.5 3.5

.02 0 OL

.27 6

.02 0 ± 0.35 .02 0

10.75 12.0 15.0 14.5 16.5 16.0 18.5 19.5

Diameter-Metric (d) (A/F) 7.0

Hole Size - Inch (b+.004) (A/F)

Hole Size - Metric (b+0.1) (A/F)

.27 6d

Hole7.0 Size 9.0 (b+0.1)

.35 4 +0.3/-0.15 .43 3

9.0 +0.3/-0.05 11.0

.35 4 -0.02/-0.15 .43 3

6.0

7.5

0.5

7.0

9.5

0.5

9.0

11.5

0.5

11.0

12.9

0.5

12.4

12.5

6.5

0.5

11.0

• The UKO inch series has a smaller flange that gives a near flush installation. • Metric body and metric threads

Material: Steel QST 34-3 Stainless Steel 304 Cu part numbering system Stainless Steel 316 Cu Aluminum ALMG 2.5

UKO Specifications Part Number Material: Example: TU-SM5UKO30ZT RoHs Compliant Finish: Steel QST 34-3 Zinc Top, 96 w / 480 r S M5 Stainless Steel 304 Cu TU Thread Size Stainless Steel 316 Cu Product Style: Material S-Steel Metric Aluminum ALMG 2.5 A-Aluminum SS-304 Stainless Steel RoHs Compliant Finish: *316-316 Stainless Steel Zinktop (Clear), 96 w / 480 r

UK Product Type Smooth Shank Small Flange, Round Body Metric Body

O 30 ZT O-Open End Grip range Zinktop (Clear) X-Closed End

Special finish or material available upon request

*316 Stainless Steel has extra corrosion resistance and can be used in the medical, chemical and food industries. Grip Range can be affected by parent material and hole size. Sherex recommends trial installations to determine the proper grip range for the application. Closed End sizes available: M4, M5, M6, M8. Also available with imperial threads - minimum order quantity is 25,000 pieces if not in stock. Contact Sherex for test data. Mating material holes must be smaller than flange diameter.

INSTALLATION TOOLING UKO Series can be installed with our Hand Tools and Hydro-Pneumatic Tools. For additional tooling information see pages 39-44.

All Parts have been manufactured by: TUBTARA®- A DEJOND PRODUCT

Sherex Fastening Solutions

•

866-474-3739

•

www.sherex.com

•

info@sherex.com

Available with knurled shank for increased performance (KN Series).

UPO RS LARGE FLANGE AND UFO RS COUNTERSUNK HEAD KNURLED METRIC SERIES UPO RS SERIES

UFO RS SERIES

upo rs metric thread (unit Part Number Steel Part Number TU-SM4UPO30RZT Steel TU-SM4UPO45RZT

• The UPO RS series has a large flange that provides increased strength and better containment of round or oversized holes. • Unique knurling increases spin out resistance in soft materials. • Metric body and metric threads

Thread Size

Min. Max. Grip Range (E) 0.5 3.0 Min. Max. 3.0 4.5 0.5 3.0 3.0 5.5 4.5 0.5 3.0 3.0 5.5 0.5 3.0 3.0 5.5 0.8 3.5 0.5 3.0 3.5 6.0 3.0 5.5 0.8 3.5 Grip (E) 3.5 Range6.0

L ± 0.35 L 10.75 ±12.25 0.35

D ± 0.35 D ±10.0 0.35

K ± 0.15 K ±0.75 0.15

M4X0.7 ISO Thread Size M4X0.7 ISO TU-SM5UPO30RZT M5X0.8 ISO 12.0 TU-SM4UPO30RZT M4X0.7 10.75 1.0 11.0 0.75 10.0 TU-SM5UPO55RZT M5X0.8 15.0 TU-SM4UPO45RZT M4X0.7 ISO 12.25 TU-SM6UPO30RZT M6X1.0 14.5 TU-SM5UPO30RZT M5X0.8 ISO 12.0 1.5 13.0 1.0 11.0 TU-SM6UPO55RZT M6X1.0 16.5 TU-SM5UPO55RZT M5X0.8 ISO 15.0 TU-SM8UPO30RZT M8X1.25 ISO 16.0 TU-SM6UPO30RZT M6X1.0 ISO 14.5 16.0 1.5 13.0 TU-SM8UPO55RZT M8X1.25 ISO 18.5 TU-SM6UPO55RZT M6X1.0 ISO 16.5 TU-SM10UPO35RZT M10X1.5 ISO 19.75 TU-SM8UPO30RZT M8X1.25 16.0 18.5 2.25 16.0 1.5 TU-SM10UPO60RZT M10X1.5 ISO 22.75 TU-SM8UPO55RZT M8X1.25 18.5 TU-SM10UPO35RZT M10X1.5 ISO 19.75 18.5 2.25 TU-SM10UPO60RZT M10X1.5 ISO 22.75 Part Number L K D ufo rs metric thread unit - millimeters ( ) Thread Size Steel ± 0.35 +0.00/-0.5 +0.3/-0.05 Min. Max. Grip Range (E) Part Number L D K TU-SM4UFO35RZT M4X0.7 ISO 1.7 3.5 11.5 Thread Size 9.0 1.5 Steel ± 0.35 +0.00/-0.5 +0.3/-0.05 Min. Max. TU-SM4UFO50RZT M4X0.7 ISO 3.5 5.0 13.0 TU-SM5UFO40RZT M5X0.8 1.7 4.0 TU-SM4UFO35RZT M4X0.7 ISO 3.5 TU-SM5UFO65RZT M5X0.8 ISO 4.0 6.5 TU-SM4UFO50RZT M4X0.7 3.5 5.0 TU-SM6UFO45RZT M6X1.0 ISO 4.5 TU-SM5UFO40RZT M5X0.8 1.7 4.0 TU-SM6UFO65RZT M6X1.0 ISO 4.5 TU-SM5UFO65RZT M5X0.8 4.0 6.5 TU-SM8UFO45RZT M8X1.25 ISO 1.7 4.5 TU-SM6UFO45RZT M6X1.0 ISO TU-SM8UFO65RZT M8X1.25 ISO TU-SM6UFO65RZT M6X1.0 ISO 4.5 6.5 TU-SM10UFO45RZT M10X1.5 ISO 1.7 4.5 TU-SM8UFO45RZT M8X1.25 TU-SM10UFO65RZT M10X1.5 ISO TU-SM8UFO65RZT M8X1.25 4.5 6.5 TU-SM10UFO45RZT M10X1.5 ISO 1.7 4.5 Material: TU-SM10UFO65RZT M10X1.5 ISO 4.5 6.5 Steel QST 34-3 Material: RoHs Compliant Finish: part numbering system Steel QST 34-3 Zinc Top, 96 w / 480 r UPO RS/UFO RS Specifications Part Number RoHs Compliant Finish: Example: TU-SM5UPO30RZT Zinc Top, 96 w / 480 r Material: Steel QST 34-3

• The UFO RS has a countersunk head style for flush installations.

- millimeters)

Grip Range (E)

RoHs Compliant Finish: Zinktop (Clear), 96 w / 480 r

• Unique knurling increases spin out resistance.

13.0 11.5 16.0 13.0 17.0 13.0 19.0 16.0 19.0 17.0 21.0 19.0 21.0 19.0 23.0 21.0 21.0 23.0

d -0.02/-0.15 d 6.3 -0.02/-0.15

Hole Size (b+0.1) Hole Size 6.4 (b+0.1)

7.3 6.3

7.4 6.4

9.3 7.3

9.4 7.4

11.4 9.3

11.5 9.4

12.9 11.4

13.0 11.5

12.9 d -0.02/-0.15 d 6.3 -0.02/-0.15

13.0 Hole Size (b+0.1) Hole Size 6.4 (b+0.1)

10.0 9.0

1.5

7.3 6.3

7.4 6.4

12.0 10.0

1.5

9.3 7.3

9.4 7.4

14.0 12.0

1.5

11.4 9.3

11.5 9.4

15.4 14.0

1.5

12.9 11.4

13.0 11.5

15.4

1.5

12.9

13.0

S M5 UP O 30 TU O-Open End Grip Product Style: Material Thread Size Product Type S-Steel Large Flange, Flat Head Metric Metric Body Part Number Example: TU-SM5UFO40RZT

R Ribbed

S M5 UF TU ZT O R 30 Product Style: Material Thread Size Product Type O-Open End Grip Ribbed Zinktop (Clear) S-Steel Smooth Shank Metric Countersunk Head Metric Body Special finish or material available upon request

• Metric body and metric threads

Grip Range can be affected by parent material and hole size. Sherex recommends trial installations to determine the proper grip range for the application. Also available with imperial threads - minimum order quantity is 25,000 pieces if not in stock. Contact Sherex for test data.

INSTALLATION TOOLING UPO RS/UFO RS Series can be installed with our Hand Tools and Hydro-Pneumatic Tools. For additional tooling information see pages 39-44.

ZT Zinktop (Clear)

All Parts have been manufactured by: TUBTARA®- A DEJOND PRODUCT Sherex rivet nuts are compatible with the following hardware: GRADE 2, GRADE 5, CLASS 8.8 and CLASS 9.8 Please contact Sherex when using other grade fasteners.

Sherex Fastening Solutions

•

866-474-3739

•

www.sherex.com

•

info@sherex.com

CLM LARGE FLANGE AND CKM SMALL FLANGE KNURLED METRIC SERIES

clm metric thread (unit Part Number Thread Size Metric - Steel CLM2-470-3.0♦ M4X0.7 ISO CLM2-580-3.0♦ M5X0.8 ISO CLM2-610-3.0 M6X1.0 ISO CLM2-8125-3.0 M8X1.25 ISO CLM2-1015-3.5♦ M10X1.5 ISO

- millimeters) L

Grip Range (E) Min.

Max.

0.25 0.25 0.50 0.50 0.50

3.00 3.00 3.00 3.00 3.50

Nom. Min. Max. 11.5 13.0 16.0 17.5 22.0

8.62 9.62 12.62 15.62 18.12

9.38 10.38 13.38 16.38 18.88

±.13

Max.

0.75 1.00 1.50 1.50 2.25

5.95 6.95 8.95 10.95 12.95

Hole Size

Ref. +0.10/-.000 7.10 7.90 9.40 11.00 14.50

6.00 7.00 9.00 11.00 13.00 • The CLM series is the metric body version of the CAL series. • Metric body and metric threads

ckm metric thread (unit Part Number Metric - Steel

Thread Size

CKM2-470-3.0♦ CKM2-580-3.0♦ CKM2-610-3.0♦ CKM2-8125-3.0♦ CKM2-1015-3.5♦

M4X0.7 ISO M5X0.8 ISO M6X1.0 ISO M8X1.25 ISO M10X1.5 ISO

- millimeters) L

Grip Range (E) Min.

Max.

0.25 0.25 0.50 0.50 0.50

3.00 3.00 3.00 3.00 3.50

Nom. Min. Max. 11.3 12.7 15.3 17.3 20.4

6.70 7.20 7.70 8.20 9.70 10.20 11.62 12.38 13.62 14.38

Hole Size

±.13

Max.

Ref.

+0.10/-.000

0.46 0.46 0.50 0.63 0.80

5.95 7.10 6.95 7.90 8.95 9.40 10.95 11.00 12.95 14.50

6.00 7.00 9.00 11.00 13.00

♦ Non-Standard Part: Minimum order quantity required after depletion of stock. Please contact Sherex for current availability.

• The CKM series is the metric body version of the CAK series.

part numbering system CLM/CKM Specifications Material: Steel 1008/1010 Aluminum 5056

Part Number Example: CLM2-610-3.0

RoHS Compliant Finishes: Zinc Plated-Yellow Trivalent Chromate per Sherex SFS-01-001, SC2 Zinc Plated-Clear Trivalent Chromate per Sherex SFS-01-001

• Metric body and metric threads

CLM Product Style Large Flange Knurled Body Metric Body

2 Material 2-Steel 3-Aluminum

610 Thread Size

3.0 Grip Range

(_) Empty-Open End B-Closed End T-Clear Trivalent

CKM Product Style Small Flange Knurled Body Metric Body

2 Material 2-Steel 3-Aluminum

610 Thread Size

3.0 Grip Range

(_) Empty-Open End B-Closed End T-Clear Trivalent

Special finish or material available upon request

Grip range can be affected by parent material and hole size. Sherex recommends trial installations to determine the proper grip range for the application. Contact Sherex for details. CLM & CKM style rivet nut specials available upon request. Contact Sherex for test data. Mating material holes must be smaller than flange diameter. INSTALLATION TOOLING CLM/CKM Series can be installed with our Hand Tools and Hydro-Pneumatic Tools. For additional tooling information see pages 39-44.

Sherex rivet nuts are compatible with the following hardware: GRADE 2, GRADE 5, CLASS 8.8 and CLASS 9.8 Please contact Sherex when using other grade fasteners.

Sherex Fastening Solutions

•

866-474-3739

•

www.sherex.com

•

info@sherex.com

RIVET RIVETNN RIVET

RIVET NUT STUDS

RIVET NUT

RI NU SE ASherex Rivet Rivet Nut Stud isNut astuds 2 studs pieceare fastener combining a rivet nut and asheet screw, idealapplications for thin sheet metal Sherex Rivet Nut studs are another solution for thin sheet metal applications Rivet are another solution for thin metal applications Sherex Nut another solution for thin sheet metal applications with blind installation requirements. Sherex Rivet Nuts are available in asizes, variety of with blind installation requirements, and are available sizes, styles, with blind installation requirements, and are available avariety variety styles, with blind installation requirements, and are available ininin aavariety ofofof sizes, styles, sizes, styles, materials, and finishes. Contact us with your thread size, length, and installation materials, and finishes. Contact usus with your thread size, length, and installation materials, and finishes. Contact with your thread size, length, and installation materials, and finishes. Contact us with your thread size, length, and installation material thickness requirements. material thickness requirements. material thickness requirements. material thickness requirements.

Sherex Rivet Nut studs are another solution for thin sheet metal applications with blind installation requirements, and are available in a variety of sizes, styles, FEATURES AND BENEFITS FEATURES AND BENEFITS FEATURES AND BENEFITS materials, and finishes. Contact us with your thread size, length, and installation • Simple, blind installation Simple, blind installation Simple, blind installation material thickness requirements. ••••Reduces Simple, blind installation processing cost of weld studs Eliminates costly, messy process Eliminates costly, messywelding welding process ••••Eliminates Eliminates costly, messy process risk of weld spatterwelding and material distortion FEATURES AND BENEFITS • Aids assembly • Aids assembly • • Eliminates Aids assembly cost of post installation paint process • be Simple, blind installation • Can used point centering pin • Can be used as ahanging hanging centering pin • • Can Canbe beused used aahanging ororor centering as as aas hanging pointpoint orpoint centering pin pin • Eliminates costly, messy welding process Great for use inwire harnessing Great for use inwire wire harnessing for use in wire harnessing ••••Great Great for use in harnessing features and benefits

• Aids assembly • Can be used as a hanging point or centering pin • Great for use in wire harnessing PRODUCT EXAMPLES PRODUCT EXAMPLES PRODUCT EXAMPLES PRODUCT EXAMPLES Wedge Head Stud Wedge Head Stud Wedge Head Stud PRODUCT EXAMPLES

Full Full Hex Stud Full Hex Stud Full Hex Stud Hex Stud Full Hex Stud

Wedge Head Stud

This M6 stud was developed forfor wire harnessing This M6 stud was developed wire harnessing This M6 stud was developed for wire harnessing This M6 stud was developed for wire harnessing on a truck frame. The design incorporates on a truck frame. The design incorporates on on a truck frame. aaa a This M6 studThe was developed for wire harnessing a truck frame. Thedesign designincorporates incorporates wedgehead feature for increased spin out wedgehead feature for increased spin out wedgehead feature forfor increased spin on a truck frame. The design incorporates wedgehead feature increased spinout out a )screw resistance, and aMAThread forout (R()R*)(*R * screw forreduced reduced resistance, and aMAThread MAThread wedgehead feature for increased spin for resistance, and a ® screw resistance, and a MAThread * screw for reduced (R)* screw for reduced cross thread risk during assembly. cross thread risk during assembly. resistance, and a MAThread cross threadcross risk thread during risk assembly. reduced during assembly.

This M12 Full Hex stud was This M12 Full Hex stud was M12 Full Hex stud was ThisThis M12 Full Hex stud was developed asas areplacement replacement forfora a developed a replacement developed as a developed as aHex replacement This M12 Full stud was for afor a weld stud in an agricultural feeder. weld stud in an agricultural weld stud in an agricultural feeder. developed replacement for a feeder. weld stud inasana agricultural feeder. weld stud in an agricultural feeder.

cross thread risk during assembly.

INSTALLATION INSTALLATION INSTALLATION INSTALLATION Sherex Rivet Nut studs cancan be installed with with specially designed rivet nutrivet stud Sherex Rivet Nut studs bebe installed specially designed nut stud Sherex Rivet Nut studs can installed with specially designed rivet nut stud Sherex Rivet Nut studs can be installed with specially designed rivet nut stud Sherex Rivet Nut studs can be installed with specially designed rivet nut stud headsets using our SSG and Flex series tools. headsets using our SSG and Flex series tools. headsets using our SSG and Flex series tools. headsets using our SSG and Flex series tools. headsets using our SSG and Flex series tools.

www.sherex.com

• E-mail: info@sherex.com

m•• E-mail: info@sherex.com E-mail: info@sherex.com •E-mail: mcom info@sherex.com 34

Sherex Fastening Solutions

• Phone: 866-474-3739 • Fax: 716-875-0358 • www.sherex.com • E-mail: info@sherex.com

(R) is a registered * tradmark MAThread is a registered trademark of MAThread Inc. *MAThread of MAThread, Sherex Fastening Solutions 866-474-3739 716-875-0358 info@sherex.com •Inc. Sherex Fastening Solutions• Phone: Phone: 866-474-3739 Fax: 716-875-0358• www.sherex.com www.sherex.com• E-mail: E-mail: info@sherex.com •Phone: •Fax: •www.sherex.com •E-mail: Sherex Fastening Solutions 866-474-3739 Fax: 716-875-0358 info@sherex.com

•

(R)(R) *MAThread aregistered registered tradmark MAThread, Inc. (R) *MAThread a registered tradmark of MAThread, Inc. *MAThread isisais tradmark ofofMAThread, Inc. Sherex Fastening Solutions • 866-474-3739

•

www.sherex.com

•

info@sherex.com

CAL & CAH KITS cal rivet nut hand tool kit (unit

Part Number

Kit Contents

CAL RNHT SML IN KIT

CAL RNHT LRG IN KIT

50 pieces of CAL2-0632-080 40 pieces of CAL2-0832-080 40 pieces of CAL2-1032-130 1 RNHT-0632 Tool 1 RNHT-0832 Tool 1 RNHT-1032 Tool

30 pieces of CAL2-2520-165 20 pieces of CAL2-3118-150 20 pieces of CAL2-3716-150 1 RNHT-2520 Tool 1 RNHT-3118 Tool 1 RNHT-3716 Tool

cal rivet nut hand tool kit (unit

Part Number

Kit Contents

CAL RNHT LRG MET KIT

50 pieces of CAL2-470-2.0 40 pieces of CAL2-580-3.3 1 RNHT-M4 Tool 1 RNHT-M5 Tool

30 pieces of CAL2-610-4.2 20 pieces of CAL2-8125-3.8 20 pieces of CAL2-1015-3.8 1 RNHT-M6 Tool 1 RNHT-M8 Tool 1 RNHT-M10 Tool

Kit Contents

- inches)

CAL SML IN KIT

CAL LRG IN KIT

50 pieces of CAL2-0632-080 40 pieces of CAL2-0832-080 40 pieces of CAL2-1032-130

30 pieces of CAL2-2520-165 20 pieces of CAL2-3118-150 20 pieces of CAL2-3716-150

cal rivet nut kit (unit

Part Number

- metric)

CAL RNHT SML MET KIT

cal rivet nut kit (unit

Part Number

- inches)

- metric)

CAL SML MET KIT

CAL LRG MET KIT

50 pieces of CAL2-470-2.0 40 pieces of CAL2-580-3.3

30 pieces of CAL2-610-4.2 20 pieces of CAL2-8125-3.8 20 pieces of CAL2-1015-3.8

cah rivet nut hand tool kit (unit

- inches)

Part Number

CAH RNHT SML IN KIT

CAH RNHT LRG IN KIT

CAH RNHT LRG MET KIT

50 pieces of CAH2-0632-080 40 pieces of CAH2-0832-080 40 pieces of CAH2-1032-130 1 RNHT-0632 Tool 1 RNHT-0832 Tool 1 RNHT-1032 Tool

30 pieces of CAH2-2520-165 20 pieces of CAH2-3118-150 20 pieces of CAH2-3716-150 1 RNHT-2520 Tool 1 RNHT-3118 Tool 1 RNHT-3716 Tool

30 pieces of CAH2-610-4.2 20 pieces of CAH2-8125-3.8 20 pieces of CAH2-1015-3.8 1 RNHT-M6 Tool 1 RNHT-M8 Tool 1 RNHT-M10 Tool

Kit Contents

cah rivet nut kit (unit

Part Number Kit Contents

(unit - metric)

- inches)

CAH SML IN KIT

(unit - metric) CAH LRG MET KIT

CAH LRG IN KIT

50 pieces of CAH2-0632-080 30 pieces of CAH2-2520-165 30 pieces of CAH2-610-4.2 40 pieces of CAH2-0832-080 20 pieces of CAH2-3118-150 20 pieces of CAH2-8125-3.8 40 pieces of CAH2-1032-130 20 pieces of CAH2-3716-150 20 pieces of CAH2-1015-3.8 Sherex Fastening Solutions

•

866-474-3739

•

www.sherex.com

•

info@sherex.com

RIV-FLOAT® KITS riv-float® rivet nut hand tool kits Inch Kit

6-32/ 8-32 Mini Inch Kit

Metric Kit

Part Number: RNHT RF INCH KIT RNHT RF METRIC KIT Tools Sizes: Rivet Nuts:

10-32/ ¼-20 Mini Inch Kit

RNHT 6-32/8-32 RF MINI KIT

RNHT 10-32/2520 RF MINI KIT

6-32 to ¼-20

M4 to M6

¼-28

10-32 and ¼-20

30 of RFL2-0632-130

30 of RFL2-470-3.3

20 of RFL2-0632-130

20 of RFL2-1032-150

30 of RFL2-0832-130

30 of RFL2-580-3.8

20 of RFL2-0832-130

10 of RFL2-2520-150

30 of RFL2-1032-150

20 of RFL2-610-3.8

20 of RFL2-2520-150

**Mechanically Locked Parts are non-stock and may have increased lead times

Mechanically Locked Mechanically Locked Inch Kit Metric Kit riv-float® rivet nut hand tool bag Part Number: RNHT RF ML INCH KIT RNHT RF ML METRIC KIT 6-32 BAG 8-32 BAG 10-32 BAG Tools Sizes: ¼-28 ¼-28 6-32 BAGBAG 8-32 BAGBAG 10-32 BAG RNHT-0832RF Part Number: RNHT-0632RF RNHT-1032RF BAG 20 of SH-22-0632

¼- 20 BAG ¼- 20 BAG RNHT-2520RF BAG

20 of SH-22-470 RNHT-0832RF RNHT-1032RF RNHT-2520RF ¼-28 BAG 10-32 BAG ¼-20 BAG 20 of SH-22-0832 20 of SH-22-580 ¼-28 10-32 ¼-20 ¼-28 15 of RFL2-0832-130 15 of RFL2-1032-150 10 of RFL2-2520-150 15 of RFL2-0632-130 20 of SH-22-1032 15 of RFL2-0632-130 15 of RFL2-0832-130 15 of RFL2-1032-150 10 of RFL2-2520-150

Part Number: Tools Sizes: RNHT-0632RF ¼-28 BAG Rivet Nuts: Tools Rivet Sizes: Nuts: Rivet Nuts:

M4 BAG

M5 BAG

M6 BAG

Part Number:

M4 BAG BAG RNHT-M4RF

M5 BAG BAG RNHT-M5RF

M6 BAG BAG RNHT-M6RF

Part Number: Tools Sizes:

RNHT-M4RF ¼-28 BAG

RNHT-M5RF M5 BAG

RNHT-M6RF M6 BAG

Tools Rivet Sizes: Nuts:

¼-28 15 of RFL2-470-3.3

M5 15 of RFL2-580-3.8

M6 15 of RFL2-610-3.8

Rivet Nuts:

15 of RFL2-470-3.3

15 of RFL2-580-3.8

15 of RFL2-610-3.8

Each tool comes with an extra mandrel

Mechanically Locked Mechanically Locked 6-32 BAG 8-32 BAG Mechanically Locked Mechanically Locked ® 10-32 BAG 8-32 BAG single kits riv short 6-32 BAG 8-32 BAG RNHT-0632RF MLfloat BAG RNHT-0832RF ML BAG Part Number:

–

Mechanically Locked 10-32 BAG Mechanically Locked BAG 10-32M4 BAG RNHT-1032RF ML BAG

M5 BAG

RNHT-M5RFS BAG RNHT-0832RFS BAG RNHT-1032RFS BAG Part Number: RNHT-M4RFS BAG 8-32 BAG 10-32 BAG M4MLBAG M5 BAG ML BAG RNHT-0832RF BAG RNHT-1032RF Part Number: ¼-28 BAG ¼-28 ML Tools Sizes: RNHT-0632RF ¼-28 M5 8-32 10-32 Tools Sizes: M4 RNHT-M5RFS BAG RNHT-0832RFS BAG BAG Part Number: ¼-28 BAG ¼-28 Tools Sizes: 15 of SH-22-0632 ¼-28 15RNHT-1032RFS of SH-22-0832 15 ofRNHT-M4RFS SH-22-1032 Rivet Nuts: 15 of M5 Rivfloat Shorts 15 of 8-32 8-32 Rivfloat Shorts 15 of 10-32 Rivfloat 15 of M4 Rivfloat Shorts Rivet Nuts: M5 10-32 15 of SH-22-0632 Tools M4 15 of SH-22-0832 15 of SH-22-1032 Rivet Sizes: Nuts:

Rivet Nuts:

15 of 8-32 Rivfloat Shorts Mechanically Locked M4 BAG Mechanically Locked M4 BAG RNHT-M4RF ML BAG

15 of 10-32 Rivfloat

15 of M4 Rivfloat Shorts

15 of M5 Rivfloat Shorts

Mechanically Locked M5 BAG Mechanically Locked M5 BAG RNHT-M5RF ML BAG

Part Number: ® multi kitsRNHT-M4RF – riv float - short BAG RNHT-M5RF Part Number: ¼-28-ML ¼-28ML BAG Tools Sizes: Tools Rivet Sizes: Nuts: Rivet Nuts: Part Number: Tools Sizes: Part Number: Tools Sizes: Rivet Nuts: Rivet Nuts:

¼-28 15 of Inch SH-22-470 Kit

Metric Kit 15 of ¼-28 SH-22-580

15 of SH-22-470 RNHT RFS Inch Inch Kit Kit

15 of SH-22-580 RNHT RFS Metric Metric Kit Kit

Sherex Fastening Solutions ~ 400M4, Riverwalk Pkwy, Suite 600 ~ Tonawanda, NY 14150 8-32, ¼-20 M5,Metric M6 RNHT10-32, RFS Inch Kit RNHT RFS Kit 8664 74 3739 ~ www.sherex.com effective March, 2009 30 of 6-3210-32, Rivfloat Shorts 40Pricing of M4 8-32, ¼-20 M4,Rivfloat M5, M6Shorts

30 30 of of 8-32 6-32 Rivfloat Rivfloat Shorts Shorts 30 of 10-32 Rivfloat Shorts Shorts 30 of 8-32 Rivfloat 20 30 of of ¼-20 10-32Rivfloat RivfloatShorts Shorts

30 40 of of M5 M4 Rivfloat Rivfloat Shorts Shorts 20 of M6 Rivfloat 30 of M5 Rivfloat Shorts Shorts 20 of M6 Rivfloat Shorts

20 of ¼-20 Rivfloat Shorts

Sherex Fastening Solutions ~ 400 Riverwalk Pkwy, Suite 600 ~ Tonawanda, NY 14150 8664 74 3739 ~ www.sherex.com Sherex Fastening Solutions ~Pricing 400 Riverwalk effective Pkwy, March,Suite 2009600 ~ Tonawanda, NY 14150 8664 74 3739 ~ www.sherex.com Pricing effective March, 2009

Sherex Fastening Solutions

•

866-474-3739

•

www.sherex.com

•

info@sherex.com

SPECIALTY FASTENER SOLUTIONS Sherex’s Application and Design Engineers can create custom, application-specific solutions. We work with our customers to understand the application requirements and manufacturing scenario, and design high performance lowest-total-installed cost solutions. We are available for line walks and to collaborate with your engineering and manufacturing teams. Contact us today to learn more. Here are some examples of custom products created by Sherex:

This Dejond part was designed with a “compression limiter-like” collar on the flat head, used to act as a spacer between two assembled components.

Was developed to attach a molded plastic cover to a base unit. If the rivet nut has an outside thread to accept a nut, the plastic cover could be altered and the external thread of the rivet nut could be used for the attachment point.

Designed with an extra large head to act like a spacer.

Sherex developed this part to add increased spin out resistance in soft materials. Special knurl design provides increased engagement with the base material. Small flange provided near flush installation.

Special small grip part designed for materials thinner than .030 inches.

Sherex Fastening Solutions

•

866-474-3739

•

www.sherex.com

•

info@sherex.com

SPECIALTY FASTENER SOLUTIONS

A replacement for a more expensive, machined component that would periodically spin-out. The customer required a low-profile insert with high spin-out resistance. Sherex developed this part has a half-hex body to increase spin performance, 0.145” max installed length, and higher strength threads to withstand installation forces.

Sherex developed a high strength rivet nut that is compatible with class 10.9 bolts. This design incorporates a full hex body for increased spin out resistance. It also ensures the bolt is the failure mode, which is a best practice when working with structural applications.

Special head and wedge design to meet spin-out requirements in an application.

Sherex shouldered rivet nut was developed for attachments in plastics. The shoulder design provides a positive metal to metal installation redirecting the load of the joint through the rivet nut shoulder. This minimizes the plastic from creeping during assembly and maintains joint clamp load.

M6 prebulbed slotted body design incorporated under head wedges to increase the spin out resistance in soft plastic.

5/16-18 prebulbed slotted body style with a trimmed head. This head feature allowed installation in the field by the consumer or assembler when used with a special low cost installation tool. Feature also allows head to sit flush within a slot to prevent spin out.

Closed end design with o-ring and o-ring recess under head provides the ultimate sealing solution for attachment points in applications with chemicals and other fluids that breakdown other sealing compounds. 38

Sherex Fastening Solutions

•

866-474-3739

•

www.sherex.com

•

info@sherex.com

FASTENER INSTALLATION SYSTEMS We are committed to providing comprehensive solutions that include the right-fit fastener and the right-fit installation tool at the lowest-total-installed-cost. In addition to our standard and speciality fasteners, we offer the following installation system options: rivet nut hand tools

pneumatic tools (spin-spin)

• Best for small production work and prototyping • Available in multiple sizes and styles

• Powered by air pressure • Available in pistol grip, right angle, and inline styles • Feature quick change nose piece for headset replacement

hydro-pneumatic tools (spin- pull)

• Powered by air pressure and hydraulic fluid • Best for heavy duty rivet nuts where higher installation force is needed

automation

• Best for large production environments • Contact us to discuss your application requirements

Tool Service and Repair

Please contact one of our authorized repair partners for tool service and repair: Alcorn Industries 5412 Rock Hampton Court Indianapolis, IN 46268 Alcornindustrial.com Sales@alcornindustrial.com 1-800-317-4775

Sherex Fastening Solutions

•

866-474-3739

Three Day Tool Service 6767 8th Street Buena Park, CA 90620 Threedaytool.com sales@threedaytool.com 714-521-9180

•

www.sherex.com

•

info@sherex.com

RIVET NUT HAND TOOLS LHF TOOLS riv-float®

standard Thread Size 6-32 8-32 10-24 10-32 1/4-20 1/4-28 M4 M5 M6 M8 M10

Mandrel LHFM 0632 LHFM 0832 LHFM 1024 LHFM 1032 LHFM 2520 LHFM 2528 LHFM M4 LHFM M5 LHFM M6 LHFM M8 LHFM M10

Anvil LHFA 0632 LHFA 0832 LHFA 10 LHFA 10 LHFA 25 LHFA 25 LHFA M4 LHFA M5 LHFA M6 LHFA M8 LHFA M10

riv-float®-short

Thread Size

Mandrel

Anvil

6-32 8-32 10-32 1/4-20 M4 M5 M6

LHFM 2528 LHFM 2528 LHFM 1032 LHFM 2520 LHFM 2528 LHFM M5 LHFM M6

LHFA 25 LHFA 25 LHFA 10RF LHFA 25RF LHFA 25 LHFA M5RF LHFA M6RF

Thread Size 8-32 10-32 M4 M5

Mandrel

Anvil

LHFM 0832 LHFM 1032 LHFM M4 LHFM M5

LHFM 0832RFS LHFM 1032RFS LHFM M4RFS LHFM M5RFS

LHF 202 (Imperial Tool) Includes: 8-32, 10-24, and 1/4-20 head sets LHF 202M (Metric Tool) Includes: M4, M5, and M6 head sets M5toHand This hand tool was designed installTool any rivet nut ranging in size from 6-32 to 1/4-28 (M4-M10), and is ideal for small production work and prototyping.

Ratchet Style Hand Installation tool designed for small production work and prototyping Installation Sizes: 6-32 to 3/8-24 (M4 – M10) M5 (Imperial Tool) Includes: 10-32, 1/4-20, 5/16-18, and 3/8-16 head sets M5 (Metric Tool) Includes: M5, M6, M8, and M10 head sets

DLHT AND DRHT TOOLS (formerly M4 and M5 Hand Tool) riv-float®

standard Thread Size

DLHT

DRHT

6-32 8-32 10-24 10-32 1/4-20 1/4-28 5/16-18 3/8-16 1/2-13 M4 M5 M6 M8 M10 M12

Head Sets (Includes Anvil & Mandrel)

Anvil

Mandrel

Thread Size

MHS-0632 MHS-0832 MHS-1024 MHS-1032 MHS-2520 MHS-2528 MHS-3118 MHS-3716 MHS-5013 MHS-M4 MHS-M5 MHS-M6 MHS-M8 MHS-M10 MHS-M12

MA-0632 MA-0832 MA-1024 MA-1032 MA-2520 MA-2528 MA-3118 MA-3716 MA-5013 MA-M4 MA-M5 MA-M6 MA-M8 MA-M5 MA-M10 MA-M12

M-0632 M-0832 M-1024 M-1032 M-2520 M-2528 M-3118 M-3716 M-5013 M-M4 M-M5 M-M6 M-M8 M-M5 M-M10 M-M12

8-32 10-32 1/4-20 M4 M5 M6

Head Sets

Anvil

(Includes Anvil & Mandrel)

riv-float®-short Thread Size

8-32 10-24 10-32 M4 M5

Head Sets

Anvil

(Includes Anvil & Mandrel)

MHS-0832RF MA-0832RFS MHS-1024RFS MA-10RFS MHS-1032RF MA-10RFS MHS-M4RFS MA-M4RFS MHS-M5RFS MA-M5RFS

DLHT (Imperial Tool) Includes: 1/4-20, 5/16-18, 3/8-16, and 1/2-13 head sets. DLHT (Metric Tool) Includes: M6, M8, M10, and M12 head sets DRHT (Imperial Tool) Includes: 10-32, 1/4-20, 5/16-18, and 3/8-16 head sets. DRHT (Metric Tool) Includes: M5, M6, M8, and M10 head sets

RNHTS TOOL riv-float®

standard

Part Number RNHT-0632 RNHT-0832 RNHT-1024 RNHT-1032 RNHT-2520 RNHT-2528 RNHT-3118 RNHT-3124 RNHT-3716 RNHT-3724 RNHT-4320 RNHT-M3 RNHT-M4 RNHT-M5 RNHT-M6 RNHT-M8 RNHT-M10

Sherex Fastening Solutions

Thread 6-32 8-32 10-24 10-32 1/4-20 1/4-28 5/16-18 5/16-24 3/8-16 3/8-24 7/16-20 M3 M4 M5 M6 M8 M10

•

Mandrel

MHS-0832RF MA-2520/2528 M-2528 MHS-1032RF MA-1032RF M-1032 MHS-2520RF MA-2520/2528RF M-2520 MHS-M4RF MA-2520/2528 M-2528 MHS-M5RF MA-M5RF M-M5 MHS-M6RF MA-M6RF M-M6

866-474-3739

Thread Size

Part Number

6-32 8-32 10-32 1/4-20 M4 M5 M6

RNHT-2528RF RNHT-2528RF RNHT-1032RF RNHT-2520RF RNHT-2528RF RNHT-M5RF RNHT-M6RF

riv-float®-short Thread Size

M4 M5

•

Part Number

RNHT-M4RFS RNHT-M5RFS

www.sherex.com

•

info@sherex.com

Mandrel

M-0832 M-1024 M-1032 M-M4 M-M5

RIVET NUT PNEUMATIC SPIN - SPIN TOOLS Designed for installing steel or aluminum CAL, CAK, CAH, CAO, CFT/CAT*, CFW/CAW* and CPB rivet nut inserts. Features quick change nose piece for head set replacement without tools. *Can install stainless steel.

SSG-800 PISTOL GRIP STYLE

Part Number

Thread Size

SSG - 801, 901 & 911

4-40 6-32 8-32 M3 M4

SSG - 802, 902 & 912

10-24 10-32 1/4-20 1/4-28 M5 M6

SSG - 803, 903 & 913

SSG - 804

SSG-808

5/16-18 5/16-24 3/8-16 3/8-24 M8 M10

Tool RPM 801&901 3000 3000 3000 3000 3000 802&902 1500 1500 1500 1500 1500 1500 803&903 600 600 600 600 600 600

911 2200 2200 2200 2200 2200 912 1100 1100 1100 1100 1100 1100 913 400 400 400 400 400 400

SSG-910 RIGHT ANGLE STYLE

SSG-900 INLINE STYLE

Air Pressure Minimum Complete Head Hex Driver Weight Air Inlet Air Use (Dynamic) Assembly Hose Size

Mandrel

Bearing Set

PSI

LBS

NPT

CFM

35-45 70-80 70-90 35-45 35-45

3.0 3.0 3.0 3.0 3.0

1/4" 1/4" 1/4" 1/4" 1/4"

5 5 5 5 5

3/8 3/8 3/8 3/8 3/8

HS-0440 HS-0632 HS-0832 HS-M3 HS-M4

HD-4 HD-6 HD-8 HD-M3 HD-M4

M-0440-150 M-0632-150 M-0832-150 M-M3-30 M-M4-35

BS-4 BS-6 BS-8 BS-M3 BS-M4

60-80 60-80 70-90 70-90 60-80 70-90

3.0 3.0 3.0 3.0 3.0 3.0

1/4" 1/4" 1/4" 1/4" 1/4" 1/4"

5 5 5 5 5 5

3/8 3/8 3/8 3/8 3/8 3/8

HS-1024 HS-1032 HS-2520 HS-2528 HS-M5 HS-M6

HD-10 HD-10 HD-25 HD-25 HD-M5 HD-M6

M-1024-175 M-1032-175 M-2520-175 M-2528-200 M-M5-40 M-M6-40

BS-10 BS-10 BS-25 BS-25 BS-M5 BS-M6

90-110 90-110 90-110 90-110 90-110 90-110

3.0 3.0 3.0 3.0 3.0 3.0

1/4" 1/4" 1/4" 1/4" 1/4" 1/4"

5 5 5 5 5 5

3/8 3/8 3/8 3/8 3/8 3/8

HS-3118 HS-3124 HS-3716 HS-3724 HS-M8 HS-M10

HD-31 HD-31 HD-37 HD-37 HD-M8 HD-M10

M-3118-175 M-3124-175 M-3716-200 M-3724-200 M-M8-40 M-M10-45

BS-31 BS-31 BS-37 BS-37 BS-M8 BS-M10

Complete Head Assembly Rivet Nut Stud

Make Up Complete Head Assembly

5/16-18 5/16-24 3/8-16 3/8-24 M8 M10

400 400 400 400 400 400

90-110 90-110 90-110 90-110 90-110 90-110

3.0 3.0 3.0 3.0 3.0 3.0

1/4" 1/4" 1/4" 1/4" 1/4" 1/4"

5 5 5 5 5 5

3/8 3/8 3/8 3/8 3/8 3/8

HS-3118 HS-3124 HS-3716 HS-3724 HS-M8 HS-M10

HD-31 HD-31 HD-37 HD-37 HD-M8 HD-M10

M-3118-175 M-3124-175 M-3716-200 M-3724-200 M-M8-40 M-M10-45

BS-31 BS-31 BS-37 BS-37 BS-M8 BS-M10

1/2-13 1/2-20 M12

275 275 275

75-120 75-120 75-120

4.0 4.0 4.0

1/4" 1/4" 1/4"

5 5 5

3/8 3/8 3/8

HS-5013 HS-5020 HS-M12

HD-50 HD-50 HD-M12

M-5013-250 M-5020-225 M-M12-60

BS-50 BS-50 BS-M12

HSS-0632

HSS-1032 HSS-2520 HSS-M5 HSS-M6

HSS-3716 HSS-M8

HSS-M8

*Contact Sherex for other thread sizes

*Contact Sherex for Prebulbed (CPB) Mandrel part numbers and for SSG replacement part numbers. Contact Sherex for SSG Replacement part numbers. *Weight for 800 series only. High temperature grease should be used to lubricate the bearing set. Contact Sherex for availability. Sherex recommends the use of an air regulator, air filter, and lubrication system to reduce the wear of internal components. It is also recommended to lubricate the mandrel to increase performance. Mandrels should be replaced when excessive thread wear occurs with a high quality socket head cap screw.

Sherex Fastening Solutions

•

866-474-3739

•

www.sherex.com

•

info@sherex.com

RIVET NUT HYDRO-PNEUMATIC FLEX-5 TOOL One Tool With Pull to Pressure & Pull to Stroke Capabilities FLEX-5S: The Sherex FLEX-5S utilizes a Pull to Stroke method of installation. This method allows the insert to be installed to the same distance each time. This is helpful when installing into soft materials (prevents crushing of the base material) or when a specific Installed Length is required.

FLEX-5P: The Sherex FLEX-5P utilizes a Pull to Pressure method of installation. This method allows the same insert type to be installed into varying material thicknesses (within the Grip Range of the part) without any adjustment to the tool.

View our FLEX-5 Tool Demonstrations at www.sherex.com features and benefits

Change over kit for converting between pull to pressure and pull to stroke • • • • • • • •

• Installs Rivet Nut Studs from M5-M8 and 10-24-5/16-24. • Available in an in-line version. • Split tool available (remote booster for lighter tool). • Upgradeable to process monitoring. • 5,000 lbs (22 kN) pulling force at 90 psi. • 7 mm (0.276 in.) of available stroke. • 2-3 second cycle time. • All aluminum design for improved durability.

Installs Rivet Nuts from: M3-M10 and 4-40-3/8-16. Push to start nose piece to spin on fastener. Single stage trigger. Automatic reverse with manual reverse bypass. Quick change mandrel design. Light weight (4.2 lbs). Can be suspended from a balancer. Socket head cap screw mandrel. 1/2

STANDARD HEAD SET

head sets for standard rivet nuts Thread Size

Complete Headset FL5 - HS - M3

Anvil (1 + 2)

Mandrel (3)

Hex Driver (4)

Reducing sleeve (5)

FL5 - HS - 00903

M -M3 -40

FL5 - HS - 01003

FL5 - HS - 09103

FL5 - HS - M4

FL5 - HS - 00904

M -M4 - 55

FL5 - HS - 01004

FL5 - HS - 09104

FL5 - HS - M5

FL5 - HS - 00905

M -M5 - 65

FL5 - HS - 01005

FL5 - HS - 09105

FL5 - HS - M6

FL5 - HS - 00906

M -M6 - 65

FL5 - HS - 01006

FL5 - HS - 09106

FL5 - HS - M8

FL5 - HS - 00908

M -M8 - 65

FL5 - HS - 01008

FL5 - HS - 09108

M 10

FL5 - HS - M10

FL5 - HS- 00910

M -M10 - 65

FL5 - HS - 01010

n/a

4 - 40 UNC

FL5 - HS - 0440

FL5 - HS- 00854

M -0440 - 175

FL5 - HS - 00754

FL5 - HS - 09154

6 -32 UNC

FL5 - HS - 0632

FL5 - HS - 00856

M -0632 - 175

FL5 - HS - 00756

FL5 - HS - 09156

8 -32 UNC

FL5 - HS - 0832

FL5 - HS - 00858

M -0832 - 175

FL5 - HS - 00758

FL5 - HS - 09158

10 -24 UNC

FL5 - HS - 1024

FL5 - HS -00850

M -1024 - 250

FL5 - HS - 00750

FL5 - HS - 09150

10 -32 UNF

FL5 - HS - 1032

FL5 - HS - 00850

M -1032 - 250

FL5 - HS - 00750

FL5 - HS - 09150

1/4-20 UNC

FL5 - HS - 2520

FL5 - HS - 00848

M -2520 - 250

FL5 - HS - 00748

FL5 - HS - 09148

1/4-28 UNF

FL5 - HS - 2528

FL5 - HS - 00848

M -2528 - 250

FL5 - HS - 00748

FL5 - HS - 09148

5/16-18 UNC

FL5 - HS - 3118

FL5 - HS - 00840

M -3118 - 250

FL5 - HS - 00740

FL5 - HS - 09140

5/16-24 UNF

FL5 - HS - 3124

FL5 - HS - 00840

M -3124 - 250

FL5 - HS - 00740

FL5 - HS - 09140

3/8-16 UNC

FL5 - HS - 3716

FL5 - HS - 00842

M -3716 - 250

FL5 - HS - 00742

n/a

3/8-24 UNF

FL5 - HS - 3724

FL5 - HS - 00842

M -3724 - 25 0

FL5 - HS - 00742

n/a

Thread Size

Hex• Driver Reducing sleeve Mandrel Complete Sherex Fastening Solutions •Anvil 866-474-3739 • www.sherex.com info@sherex.com (1 + 2) (3) (4) (5) Headset

1/4-28 UNF

FL5 - HS - 2528

FL5 - HS - 00848

M -2528 - 250

FL5 - HS - 00748

FL5 - HS - 09148

5/16-18 UNC

FL5 - HS - 3118

FL5 - HS - 00840

M -3118 - 250

FL5 - HS - 00740

FL5 - HS - 09140

FL5 - HS - 00840 FL5 - HS - 00740FLEXFL5 - 5 HS -TOOL 09140 RIVET NUT HYDRO-PNEUMATIC & MS 100 TOOL

5/16-24 UNF

FL5 - HS - 3124

3/8-16 UNC

FL5 - HS - 3716

3/8-24 UNF

FL5 - HS - 3724

Thread Size

Complete Headset

M -3124 - 250

FL5 - HS - 00842

M -3716 - 250

FL5 - HS - 00742

n/a

FL5 - HS - 00842

M -3724 - 25 0

FL5 - HS - 00742

n/a

Anvil (1 + 2)

Mandrel (3)

Hex Driver (4)

head sets for rivet nut studs

FL5 - HS - M5S

FL5 - HS - S0905

FL5 - HS - 0S005

FL5 - HS - 01010

Reducing sleeve (5) n/a

FL5 - HS - M6S

FL5 - HS - S0906

FL5 - HS - 0S006

FL5 - HS - 01010

n/a

M 8*

FL5 - HS - M8S

FL5 - HS - S0908

FL5 - HS - 0S008

FL5 - HS - 01010

n/a

10 -24 UNC

FL5 - HS - 1024S

FL5 - HS - S0850

FL5 - HS - S1024

FL5 - HS - 01010

n/a

10 -32 UNF

FL5 - HS - 1032S

FL5 - HS - S0850

FL5 - HS - S1032

FL5 - HS - 01010

n/a

1/4-20 UNC 1/4-28 UNF

FL5 - HS - 2520S

FL5 - HS - S0848

FL5 - HS - S2520

FL5 - HS - 01010

n/a

FL5 - HS - 2528S

FL5 - HS - S0848

FL5 - HS - S2528

FL5 - HS - 01010

n/a

5/16-18 UNC *

F L5- HS - 3118S

FL5 - HS - S0840

FL5 - HS - S3118

FL5 - HS - 01010

n/a

5/16-24 UNF *

FL5 - HS - 3124S

FL5 - HS - S0840

FL5 - HS - S3124

FL5 - HS - 01010

n/a

1/2

STUD PULLER

*Head sets include p/n FL5-HS-12S92 adaptor nut 1/2

head sets for riv-float® Thread Size Thread Size

M4 M5 M4 M6 M5 4-40 M6UNC 6-32 4-40 UNC UNC 8-32 UNC 6-32 UNC 10-24 UNC 8-32 UNC 10-32 UNC UNF 10-24 1/4-20 UNC 10-32 UNF 1/4-28 UNF Thread 1/4-20Size UNC 6-32

Complete Headset Complete Headset F L 5-HS -2528R F L 5-HS -M5R F L 5-HS -2528R F L 5-HS -M6R F L 5-HS -M5R F L 5-HS -2528R F L 5-HS -M6R F L 5-HS -2528R F L 5-HS -2528R F L 5-HS -2528R F L 5-HS -2528R F L 5-HS -1024R F L 5-HS -2528R F L 5-HS -1032R F L 5-HS -1024R F L 5-HS -2520R F L 5-HS -1032R MS 50 F L 5-HS -2528R Mandrel Anvil1 F L 5-HS -2520R

MA-364-0632

MA-367-0632

Anvil (1 + 2) Anvil (1 +-00848 2) F L 5-HS

Mandrel (3) Mandrel (3) M-2528-225

Hex Driver (4) Hex Driver (4)-00748 F L 5-HS

F L 5-HS -R 0995 F L 5-HS -00848 F L 5-HS -R 0996 F L 5-HS -R 0995 F L 5-HS -00848 F L 5-HS -R 0996 F L 5-HS -00848 F L 5-HS -00848 F L 5-HS -00848 F L 5-HS -00848 F L 5-HS -R 0950 F L 5-HS -00848 F L 5-HS -R 0950 F L 5-HS -R 0950 F L 5-HS -R 0948 F L 5-HS -R 0950 F L 5-HS -R 0948 F L 5-HS -R 0948

M-M5-65 M-2528-225 M-M6-65 M-M5-65 M-2528-225 M-M6-65 M-2528-225 M-2528-225 M-2528-225 M-2528-225 M-1024-250 M-2528-225 M-1032-250 M-1024-250 M-2520-250 M-1032-250 M-2528-250 M-2520-250

F L 5-HS -01005 F L 5-HS -00748 F L 5-HS -01006 F L 5-HS -01005 F L 5-HS -00748 F L 5-HS -01006 F L 5-HS -00748 F L 5-HS -00748 F L 5-HS -00748 F L 5-HS -00748 F L 5-HS -00750 F L 5-HS -00748 F L 5-HS -00750 F L 5-HS -00750 F L 5-HS -00748 F L 5-HS -00750 F L 5-HS -00748 F L 5-HS -00748

M-2528-250 Mandrel (3) Mandrel M-M4-55 (3)

F L 5-HS -00748 Hex Driver (4) Hex Driver (4)-01004 F L 5-HS

M-M5-65 M-M4-55 M-0832-150 M-M5-65 M-1024-225 M-0832-150 M-1032-225 M-1024-225

F L 5-HS -01005 F L 5-HS -01004 F L 5-HS -00758 F L 5-HS -01005 F L 5-HS -00750 F L 5-HS -00758 F L 5-HS -00750 F L 5-HS -00750

F L 5-HS -09105 F L 5-HS -09104 F L 5-HS -09158 F L 5-HS -09105 F L 5-HS -09150 F L 5-HS -09158 F L 5-HS -09150 F L 5-HS -09150

M-1032-225

F L 5-HS -00750

F L 5-HS -09150

1/4-28 F L 5-HSMA-157-0832 -2528R 1 F L 5-HS -R 0948 8-32 UNFMA-207-0832 Anvil head sets for Complete riv-float®-short Thread 10-24 SizeMA-209-1024Headset MA-159-1032 (1 + 2) 10-32 MA-162-1032Complete MA-159-1032 Anvil Thread SizeMA-211-2520 1/4-20 MA-161-2520 F L 5-HS -M4S R F L 5-HS -S 2) R 0994 (1 + Headset M4

1/4-28 MA-362-2528 MA-161-2520 F L 5-HSMA-368-3118 -M5S R F L 5-HS -S R 0995 M5 5/16-18 MA-365-3118 F L 5-HS -M4S R F L 5-HS -S R 0994 M4 5/16-24 MA-366-3124 MA-368-3118 F L 5-HS -0832S R F L 5-HS -S R 0858 8-32 UNC F L 5-HSMA-357-3716 -M5S R F L 5-HS -S R 0995 M5 3/8-16 MA-358-3716 F L 5-HS MA-357-3716 -1024S R F L 5-HS -S R 0950 10-24 UNC 3/8-24 MA-363-3724 F L 5-HS -0832S R F L 5-HS -S R 0858 8-32 UNC M3 MA-203-03MM F L 5-HSMA-213-03MM -1032S R F L 5-HS -S R 0950 10-32 UNF F L 5-HSMA-214-04MM -1024S R F L 5-HS -S R 0950 10-24 UNC M4 MA-204-04MM M5 MA-205-05MM F L 5-HSMA-215-05MM -1032S R F L 5-HS -S R 0950 10-32 UNF M6 MA-206-06MM MA-216-06MM M8 MA-208-08MM MA-218-08MM MA-210-10MM MA-220-10MM msM10 100 rivet nut tool

Thread Size 5/16-18 5/16-24 3/8-16 3/8-24 7/16-14 7/16-20 1/2-13 1/2-20 M8 M10 M12 M14

MS100 Mandrel MA-373-3118 MA-377-3124 MA-374-3716 MA-378-3724 MA-375-4314 MA-301-4320 MA-376-5013 MA-379-5020 MA-308-08MM MA-310-10MM MA-312-12MM MA-314-14MM

Anvil MA-369-3118 MA-369-3118 MA-370-3716 MA-370-3716 MA-371-4314 MA-371-4314 MA-372-5013 MA-372-5013 MA-318-08MM MA-320-10MM MA-322-12MM MA-324-14MM

Sherex Fastening Solutions

•

Reducing sleeve (5) Reducing sleeve (5)-09148 F L 5-HS F L 5-HS -09105 F L 5-HS -09148 F L 5-HS -09106 F L 5-HS -09105 F L 5-HS -09148 F L 5-HS -09106 F L 5-HS -09148 F L 5-HS -09148 F L 5-HS -09148 F L 5-HS -09148 F L 5-HS -09150 F L 5-HS -09148 F L 5-HS -09150 F L 5-HS -09150 F L 5-HS -09148 F L 5-HS -09150 F L 5-HS -09148 F L 5-HS -09148

RIV-FLOAT® HEAD SETS

F L 5-HS -09148 Reducing sleeve (5) Reducing sleeve (5)-09104 F L 5-HS

The MS 100 Rivet Nut installation tool installs rivet nuts from 5/16-18 to 1/2-20 and M8 to M14. It also installs 5/16 -18 and M8 Riv-Float®. The MS 100 tool comes with one mandrel and one anvil. The MS 100 Rivet Nut installation tool should be operated at 80-100 psi. Sherex recommends the use of an air regulator, air filter and lubrication system to reduce the wear of internal components. It is also recommended to lubricate the mandrel to increase performance. Mandrels should be replaced when excessive thread wear occurs.

866-474-3739

•

www.sherex.com

•

info@sherex.com

RIVET NUT HYDRO-PNEUMATIC FLEX-18 TOOL features and benefits

The most powerful tool on the market providing Pull to Pressure and Pull to Stroke installation capabilities. • • • • • • • • • • • • •

Installs Rivet Nuts from M8 to M16 and 5/16-18 to 3/4-10. Push to start nose piece to spin on fastener. Single stage trigger. Automatic reverse with manual reverse bypass. Quick change mandrel design. Socket head cap screw mandrel for sizes up to M12 and 1/2-20. Can be suspended from a balancer. 18,000 lbs. (80 kN) of pulling force. 15 mm (.591 in) of available stroke. Upgradeable to process monitoring. 2-3 second cycle time. Light weight handle (8.0 lbs.). All aluminum handle design for improved durability.

FL EX-18 SE RIES HEAD SE T C OMP ONEN TS

head sets for standard size nose case Thread Size

Thread Size

Complete Headset Complete

Headset

Anvil

Hex Driver

Mandrel

Anvil

M -M8 -65

Adaptor Nut

Hex Driver

Mandrel

FL5 - H S -010 08

Adaptor Nut

FL18 - H S -M8

FL18 - H S -00908

FL18 - H S -09108

M10 M8

FL18 S -M10 FL18- H -H S -M8

FL18 - H-SH-00910 FL18 S -00908 M -M M10-65 -M8 -65

FL18 - H-SH-00912 - H S- H -01012 H S -09112 FL18 S -00910 M -MM12-65 -M 10-65 FL18FL5 S - 01010 FL18 -FL18 - H S -09110

FL5 -FL5 H S - 01010 H S -09110 H S -010 08 FL18 -FL18 - H S -09108

M12 M10

FL18 -M12 FL18- H - HS S -M10

5/16 -18 M12UNC

FL18 -3118 FL18- -HHS S -M12

FL18 - H-SH-00908 H S -00740 H S -09108 FL18 S -00912 M -3118 M -M -250 12-65 FL5 -FL18 - H S -01012FL18 -FL18 - H S -09112

5/16 -24 5/16 -18 UNF UNC

FL18 -3124 FL18- H - HS S -3118

3/8-16 5/16 -24UNC UNF

FL18 -3716 FL18- H - HS S -3124

FL18 - H-SH-00908 -250-250FL5 -FL5 H S -00740 H S -09108 FL18 S -00908 M -3124 M -3118 - H S -00740 FL18 -FL18 - H S -09108 FL18 H S -00910 M -3716 -300 FL5 H S -00742 FL18 H S -09110 FL18 - H S -00908 M -3124 -250 FL5 - H S -00740 FL18 - H S -09108

3/8-24 UNF

FL18 - H S -3724

FL18 - H S -00910

1/2-13 UNC

FL18 - H S -5013

FL18 - H S -00950

M -5013 -300

FL18 - H S -00750

FL18 - H S -09150

1/2-20 UNF

FL18 - H S -5020

FL18 - H S -00950

M -5020 -300

FL18 - H S -00750

FL18 - H S -09150

3/8-16 UNC 3/8-24 UNF

1/2-13 UNC 1/2-20 UNF

FL18 - H S -3716 FL18 - H S -3724

FL18 - H S -5013 FL18 - H S -5020

Complete Thread Size head sets for large Headset Complete Thread M16 Size FL18 - H S -M16 Headset 5/8-11 UNC FL18 - H S -6211 M16UNC FL18- H -H S -M16 3/4-10 FL18 S -7510

-300 H S -00742 H S -09110 FL18 - H S -00910 M -3724 M -3716 -300FL5 -FL5 - H S -00742 FL18 -FL18 - H S -09110

FL18 - H S -00910

FL18 - H S -00950 FL18 - H S -00950

M -3724 -300

FL5 - H S -00742

M -5013 -300

FL18 - H S -00750

FL18 - H S -09150

M -5020 -300

FL18 - H S -00750

FL18 - H S -09150

Mandrel sizeAnvil nose case FL18 - H SAnvil -00916

Mandrel M -M 16-F L 18

FL18 - H S -00962

M -6211 -FL18

FL18 S -00916 M -7510 M -M -FL18 16-F L 18 FL18 - H-SH-00975

5/8-11 UNC

FL18 - H S -6211

FL18 - H S -00962

M -6211 -FL18

3/4-10 UNC

FL18 - H S -7510

FL18 - H S -00975

M -7510 -FL18

View our FLEX-18 tool demonstration at www.Sherex.com Contact Sherex for more information on Process Monitoring Tools.

Sherex Fastening Solutions

•

866-474-3739

•

www.sherex.com

•

info@sherex.com

FL18 - H S -09110

RIVET NUT COATINGS Sherex rivet nuts are coated in a variety of electroplated coatings to increase corrosion resistance. Electroplated coatings are metals within a solution applied via an electrical current, and are RoHS, Reach, and ELV compliant, EXCEPT for Cadmium. Customer-specific and custom coatings are available on request. Coating Description Zinktop Clear

Zinc Nickel

Salt Spray Test Results (per ASTM B117-16)

• Zinc plated then coated (passivated) • 96 hours before white rust with Trivalent Chromate • 480 hours before red rust • Standard on Dejond Tubtara® • Color: clear • 120 hours before white rust • 1,000 hours before red rust

• Standard Zinc Nickel • Color: silver (clear) or black

Trivalent Chromate

• Zinc plated then coated (passivated) • 96 hours before white rust with Trivalent Chromate • 240 hours before red rust • Color: yellow, clear, black

Tin

• Proprietary • Cadmium replacement when RoHS compliance is needed

• 96 hours before red rust

CRE

• Proprietary Zinc Nickel offering superior performance to standard • Color: silver or black

• 500 hours before red rust

• Propietary Zinc Nickel offering superior performance standard • Color: silver or black

• 1,000 hours before red rust

Cadmium Yellow

• Compliant to ASTM B766, • 96 hours before red rust Class 5, Type II, and SAE AMS-QQ-P-416 Class 3, Type II

Cadmium Clear

• Rivet Nuts (CAW, CAT) • Compliant to SAE AMS-QQ-P-416 Class 3, Type 1 with clear coat

Sherex Fastening Solutions

•

866-474-3739

•

www.sherex.com

• 72 hours before white rust • 144 hours before red rust

•

info@sherex.com

SEALANTS Rivet nut head sealants are an ideal solution when a leak proof joint is required. We recommend using in conjunction with closed end rivet nuts for optimal performance. Seal Description • For standard large Seal2 flange rivet nuts • Prevents fluid or air from passing through head • Resistant to automotive fluids (oils, fuels, antifreeze)

Performance Results

Best Fit Applications

• Withstands temperatures up to 300F (150C)

• Where resistance to automotive fluids is necessary

• No leakage up to 160 psi of backside pressure

• Ideal replacement for PVC foam Plastisol

• For standard large flange rivet nuts • PVC particles suspended in plasticizer • Cost effective option for sealing out dirt, dust, and water

Silicone

• For standard large flange rivet nuts • Compatible with plastics

Dejond O-Ring Seal

• For HX Tubtara® parts • O-ring made of Nitrile Rubber (NBR) • Offset groove for metal to metal contact, providing better spin out resistance

Sherex Fastening Solutions

•

• Not recommended in • General purpose sealing applications where contact with automotive fluids is possible

• Withstands temperatures up to 425F (218C)

• Where part must withstand a finish baking process

• Can pass through paint bake for up to 30 minutes with no reduction in sealing performance • Watertight up to 145 PSI (per IP68)

• Marine, automotive, heavy truck, and other harsh • Resistant to hydraulic environments where fluids, organic oils, a watertight seal gasoline, kerosene, is required and water under 175F (80C)

866-474-3739

•

www.sherex.com

•

info@sherex.com

MECHANICAL LOCK & LOCSERT®

Product Description • The final thread of the Mechanical Lock rivet nut is mechanically deformed. The deformed thread acts as a prevailing torque feature, which resists vibrational loosening. Mechanical Lock

• Available on most rivet nuts series, including Hex Body, Round Body with keyed head, and Round Body with wedge head

Performance Results • Mechanical locks are applied onto rivet nuts to customer specifications, and can be applied to meet IFI, ISO, and NAS prevailing torque specifications. Contact Sherex for more information.

Best Fit Applications • Where joints are susceptible to vibrational loosening • Where currently using locking patch on a bolt. Our Mechanical Lock feature is a cost-effective alternative.

• Spin-pull tools are required for installation

Locsert®

• Has been tested to increase spin out performance on average 87%

• For standard rivet nuts • Adhesive preapplied under the head • During installation, the adhesive bonds the rivet nut to the base material

• Where a round hole is the only option not able to stamp a hex hole • Increased spin out performance for a round rivet nut

• Increases spin out performance

Sherex Fastening Solutions

•

866-474-3739

•

www.sherex.com

•

info@sherex.com

TESTING METHODS pull out

Definition: • Pull Out occurs when threads are pulled from the rivet nut (ultimate thread strength) or base material is distorted and the entire rivet nut pulls through the base material. Causes: • Hole size is too large. • Forces applied to the joint are higher than anticipated.

spin out

Definition: • Spin Out is the amount of torque required to make a rivet nut spin in the hole in which it was installed. Causes: • Bolt cross threads into the rivet nut causing it to spin. • Excessive corrosion causes bolt to bind in the nut. • Using a screw with mechanical locking feature that has higher prevailing torque than the spin out of the rivet nut. torque out

Definition: • Torque force required to strip threads out of the rivet nut. • This method of testing sandwiches the head of the rivet nut between the non-rotational mating part and parent or base panel. • Spin Out is not a factor because tightening the bolt on the non-rotating part holds the rivet nut in place and prevents it from spinning. Causes: • Assembly torque is too high causing thread failure. • Improper grade of fastener used. *Torque can be affected by various factors such as coefficient of friction of the finish, prevailing torque, washers, etc. Sherex recommends you test your application. suggested assembly torque SUGGESTED ASSEMBLY TORQUE

Definition: • Recommended torque for assembling a rivet nut joint with Class 8.8/Grade 5 hardware.

Contact Sherex should you require Grade 8, Class 10 or higher joint strength.

Sherex Fastening Solutions

•

866-474-3739

•

www.sherex.com

•

THREAD SIZE

INCH LBS. -Nm PLATED SCREW GRADE 5 CLASS 8.8

# 6-32 UNC # 8-32 UNC # 10-24 UNC # 10-32 UNF 1/4-20 UNC 1/4-28 UNF 5/16-18 UNC 5/16-24 UNC 3/8-16 UNC 3/8-24 UNF M4x0.7 ISO M5x0.8 ISO M6x1.0 ISO M8x1.25 ISO M10x1.5 ISO M12x1.75 ISO

12 22 32 36 75 75 156 156 276 276 2.5 5.0 8.6 21.0 42.0 72.0

info@sherex.com

SHEREX DECIMAL EQUIVALENTS & DRILL SIZE CHART

Drill

Size

Inch InchDrill Metric Size (mm) (Dec.) (Dec.)

Drill Metric Inch Metric Inch Drill InchDrill (mm) Size (mm) (Dec.) Size (Dec.) Size (Dec.)

Metric Metric Drill (mm) (mm) Size

Drill Metric Inch Drill Inch Inch Size (mm) (Dec.) Size (Dec.) (Dec.)

Metric Metric Drill (mm) (mm) Size

Drill Metric Inch Drill Inch Inch Size (mm) (Dec.) Size (Dec.) (Dec.)

Metric Metric Drill (mm) (mm) Size

Drill Metric Inch Drill Inch Inch Size (mm) (Dec.) Size (Dec.) (Dec.)

Metric Metric (mm) (mm)

.0135 80

.0135 .343

.343 50

50 .0700 50

.0700 .0700 1.778

1.778 1.778 22

22 .157022

.1570 .1570 3.988

3.988 3.988 G

.2610GG

.2610 .2610 6.630

6.630 6.630 31/64

31/64 12.304 .4844 31/64 .4844 .4844

12.304 12.304

.0145 79

.0145 .368

.368 49

49 .0730 49

.0730 .0730 1.854

1.854 1.854 21

21 .159021

.1590 .1590 4.039

4.039 4.039 17/64

17/64 6.746 .2656 17/64 .2656 .2656

6.746 6.746 1/2

1/2 1/2 .5000

.5000 .5000 12.700

12.700 12.700

1/64

.01561/64

.0156 .396

.396 48

48 .0760 48

.0760 .0760 1.930

1.930 1.930 20

20 .161020

.1610 .1610 4.089

4.089 4.089 H

.2660HH

.2660 .2660 6.756

6.756 6.756 33/64

33/64 13.096 .5156 33/64 .5156 .5156

13.096 13.096

.0160 78

.0160 .406

.406 5/64

5/64 1.984 .0781 .0781 .07815/64

1.984 1.984 19

19 .166019

.1660 .1660 4.216

4.216 4.216 I

.2720II

.2720 .2720 6.909

6.909 6.909 17/32

17/32 13.492 .5312 17/32 .5312 .5312

13.492 13.492

.0180 77

.0180 .457

.457 47

47 .0785 47

.0785 .0785 1.994

1.994 1.994 18

18 .169518

.1695 .1695 4.305

4.305 4.305 J

.2770JJ

.2770 .2770 7.036

7.036 7.036 35/64

35/64 13.891 .5469 35/64 .5469 .5469

13.891 13.891

.0200 76

.0200 .508

.508 46

46 .0810 46

.0810 .0810 2.057

2.057 2.057 11/64

11/64 4.366 .1719 11/64 .1719 .1719

4.366 4.366 K

.2810KK

.2810 .2810 7.137

7.137 7.137 9/16

9/16 14.288 .5625 9/16 .5625 .5625

14.288 14.288

.0210 75

.0210 .533

.533 45

45 .0820 45

.0820 .0820 2.083

2.083 2.083 17

17 .173017

.1730 .1730 4.394

4.394 4.394 9/32

9/32 9/32 .2812

.2812 .2812 7.142

7.142 7.142 37/64

37/64 14.684 .5781 37/64 .5781 .5781

14.684 14.684

.0225 74

.0225 .572

.572 44

44 .0860 44

.0860 .0860 2.184

2.184 2.184 16

16 .177016

.1770 .1770 4.496

4.496 4.496 L

.2900LL

.2900 .2900 7.366

7.366 7.366 19/32

19/32 .5938 19/32 15.083 .5938 .5938

15.083 15.083

.0240 73

.0240 .609

.609 43

43 .0890 43

.0890 .0890 2.261

2.261 2.261 15

15 .180015

.1800 .1800 4.572

4.572 4.572 M

.2950MM

.2950 .2950 7.493

7.493 7.493 39/64

39/64 .6094 39/64 15.479 .6094 .6094

15.479 15.479

.0250 72

.0250 .635

.635 42

42 .0935 42

.0935 .0935 2.375

2.375 2.375 14

14 .182014

.1820 .1820 4.623

4.623 4.623 19/64

19/64 19/64 .2969

.2969 .2969 7.541

7.541 7.541 5/8

5/8 5/8 .6250

.6250 .6250 15.875

15.875 15.875

.0260 71

.0260 .660

.660 3/32

.0938 3/32 2.383 .0938 .09383/32

2.383 2.383 13

13 .185013

.1850 .1850 4.700

4.700 4.700 N

.3020NN

.3020 .3020 7.671

7.671 7.671 41/64

41/64 .6406 41/64 16.271 .6406 .6406

16.271 16.271

.0280 70

.0280 .711

.711 41

41 .0960 41

.0960 .0960 2.438

2.438 2.438 3/16

3/16 3/16 .1875

.1875 .1875 4.763

4.763 4.763 5/16

5/16 5/16 .3125

.3125 .3125 7.938

7.938 7.938 21/32

21/32 .6562 21/32 16.667 .6562 .6562

16.667 16.667

.0292 69

.0292 .742

.742 40

40 .0980 40

.0980 .0980 2.489

2.489 2.489 12

12 .189012

.1890 .1890 4.801

4.801 4.801 O

.3160OO

.3160 .3160 8.026

8.026 8.026 43/64

43/64 .6719 43/64 17.066 .6719 .6719

17.066 17.066

.0310 68

.0310 .787

.787 39

39 .0995 39

.0995 .0995 2.527

2.527 2.527 11

11 .191011

.1910 .1910 4.851

4.851 4.851 P

.3230PP

.3230 .3230 8.204

8.204 8.204 11/16

11/16 .6875 11/16 17.463 .6875 .6875

17.463 17.463

1/32

.03121/32 .0320 67

.0312 .792 .0320 .813

.792 38

38 .1015 38 37 .104 37

.1015 .1015 2.578 .104 .104 2.642

2.578 2.578 10

10 .193510 .196099

.1935 .1935 4.915 .1960 .1960 4.978

4.915 4.915 21/64

21/64 .3281 21/64 8.334 .3281 .3281 .3320 .3320 .3320QQ 8.433

8.334 8.334 45/64

45/64 .7031 45/64 17.859 .7031 .7031 23/32 .7188 23/32 18.258 .7188 .7188

18.258 18.258

.330 66 .0350 65 .0360 64

.330 .838 .0350 .889

.199088 .201077

.1990 .1990 5.055 .2010 .2010 5.105

5.105 5.105 11/32

.3390 .3390 .3390RR 8.611 11/32 .3438 11/32 8.733 .3438 .3438

8.611 8.611 47/64

13/64 .2031 13/64 5.159 .2031 .2031 .2040 .2040 .204066 5.182

5.159 5.159 S 5.182 5.182 T

.3480SS .3580TT

.205555 .209044

.2055 .2055 5.220 .2090 .2090 5.309

5.220 5.220 23/64

23/64 .3594 23/64 9.129 .3594 .3594 .3680 .3680 .3680UU 9.347

9.129 9.129 51/64

.213033 7/32 7/32 .2188

.2130 .2130 5.410 .2188 .2188 5.558

3/8 3/8 .3750 .3770VV

.3750 .3750 9.525 .3770 .3770 9.576

9.525 9.525 53/64

.221022 .228011

.2210 .2210 5.613 .2280 .2280 5.791

.3860 W .3860 .3860W 9.804 25/64 .3906 25/64 9.921 .3906 .3906 .3970 .3970 .3970XX 10.084

9.804 9.804 55/64 9.921 9.921 7/8

64 63 62 61 60 59 58 57 56

3/64 55 54

.0370 63 .0380 62 .0390 61 .0400 60 59 .0410 59 58 .0420 58 57 .0430 57 56 .0465 56

.889 7/64 .914 35

.0360 .914 .0370 .940

.940 34 .965 33

.0380 .965 .0390 .991

.991 32 1.016 31

.0400 1.016 .0410 .0410 1.041

1.041 1.041 1/8 1.067 1.067 30

.0420 .0420 1.067 .0430 .0430 1.092

1.092 1.092 29 1.181 1.181 28

.0465 .0465 1.181 3/64 1.191 .0469 .0469 .04693/64 55 1.321 .0520 .0520 .0520 55 54 1.397 .0550 .0550 .0550 54

53 1.511 .0595 .0595 .0595 53 1/16 1.588 .0625 .0625 .06251/16 52 1.613 .0635 .0635 .0635 52

51 .0670 51

1/16

.813 37 .838 36

No. of Gauge 10 11 12 13 14 15 16 17 18 19 20

.0670 .0670 1.702 No. of No. of Aluminum Gauge Gauge (B & S) 10 100.101 11 11 0.0907 12 12 0.0808 13 130.072 14 14 0.0641 15 15 0.0571 16 16 0.0508 17 17 0.0453 18 18 0.0403 19 19 0.0359 20 20 0.0320

.1065 36 2.705 .1065 .1065 36 .1094 7/64 2.779 .1094 .10947/64

35 .1100 35 34 .1110 34

.1100 .1100 2.794 .1110 .1110 2.819

33 .1130 33 32 .1160 32

.1130 .1130 2.870 .1160 .1160 2.946

31 .1200 31 1/8 .12501/8

.1200 .1200 3.048 .1250 .1250 3.175

30 .1285 30 29 .1360 29

.1285 .1285 3.264 .1360 .1360 3.454

1.191 1.191 9/63 1.321 1.321 27

.1405 28 3.569 .1405 .1405 28 .1406 9/63 3.571 .1406 .14069/63 .1440 27 3.658 .1440 .1440 27

1.397 1.397 26 1.511 1.511 25

26 .1470 26 25 .1495 25

1.588 1.588 24 1.613 1.613 23

24 .1520 24 23 .1540 23

1.702 1.702 5/32

2.642 2.642 9 2.705 2.705 8 2.779 2.779 7 2.794 2.794 13/64 2.819 2.819 6 2.870 2.870 5 2.946 2.946 4 3.048 3.048 3 3.175 3.175 7/32 3.264 3.264 2 3.454 3.454 1 3.569 3.569 A

4.978 4.978 Q 5.055 5.055 R

5.309 5.309 U 5.410 5.410 3/8 5.558 5.558 V 5.613 5.613 W 5.791 5.791 25/64 5.944 5.944 X

.3480 .3480 8.839 .3580 .3580 9.093

3.571 3.571 15/64 3.658 3.658 B

.2340 .2340 .2340AA 5.944 15/64 .2344 15/64 5.954 .2344 .2344 .2380 .2380 .2380BB 6.045

.1470 .1470 3.734 .1495 .1495 3.797

3.734 3.734 C 3.797 3.797 D

.2420CC .2460DD

.2420 .2420 6.147 .2460 .2460 6.248

6.147 6.147 Z 6.248 6.248 27/64

.1520 .1520 3.861 .1540 .1540 3.912

3.861 3.861 1/4 3.912 3.912 E

1/4 .25001/4 .2500EE

.2500 .2500 6.350 .2500 .2500 6.350

6.350 6.350 7/16 6.350 6.350 29/64

27/64 .4219 27/64 10.716 .4219 .4219 7/16 .4375 7/16 11.113 .4375 .4375 29/64 .4531 29/64 11.509 .4531 .4531

.1562 5/32 3.967 .1562 .15625/32

3.967 3.967 F

.2570 FF

.2570 .2570 6.528

6.528 6.528 15/32

15/32 .4688 15/32 11.908 .4688 .4688

Aluminum Aluminum Steel (B & (B(U.S. & S) S)Std.)

Steel Steel (U.S. (U.S. Std.) Std.)

0.101 0.101 0.1345 0.0907 0.0907 0.1196 0.0808 0.0808 0.1046 0.072 0.072 0.0897 0.0641 0.0641 0.0747 0.0571 0.0571 0.0673 0.0508 0.0508 0.0598 0.0453 0.0453 0.0538 0.0403 0.0403 0.0478 0.0359 0.0359 0.0418 0.0320 0.0320 0.0359

0.1345 0.1345 0.1196 0.1196

Gauge 21 22

0.1046 0.1046 0.0897 0.0897

23 24

0.0747 0.0747 0.0673 0.0673

25 26

0.0598 0.0598 0.0538 0.0538

27 28

0.0478 0.0478 0.0418 0.0418

29 30

0.0359 0.0359

Sherex Fastening Solutions

No. of No. of Aluminum Gauge Gauge (B & S) 21 210.0285 22 220.0253 23 230.0226 24 240.0201 25 250.0179 26 260.0159 27 270.0142 28 280.0126 29 290.0113 30 300.0100

No. of

•

866-474-3739

•

www.sherex.com

5.954 5.954 Y 6.045 6.045 13/32

.4040 .4040 .4040YY 10.262 13/32 .4062 13/32 10.317 .4062 .4062 .4130 .4130 .4130ZZ 10.490

Aluminum Aluminum Steel (B (B&&S) S) (U.S. Std.) 0.0285 0.0285 0.0253 0.0253 0.0226 0.0226 0.0201 0.0201 0.0179 0.0179 0.0159 0.0159 0.0142 0.0142 0.0126 0.0126 0.0113 0.0113 0.0100 0.0100

•

0.0329 0.0299 0.0269 0.0239 0.0209 0.0179 0.0164 0.0149 0.0135 0.0120

info@sherex.com

8.433 8.433 23/32 8.733 8.733 3/4 8.839 8.839 49/64 9.093 9.093 25/32 9.347 9.347 13/16 9.576 9.576 27/32

10.084 10.084 57/64 10.262 10.262 29/32 10.317 10.317 59/64 10.490 10.490 15/16 10.716 10.716 61/64 11.113 11.113 31/32 11.509 11.509 63/64 11.908 11.908 1

17.859 17.859

47/64 .7344 47/64 18.654 .7344 .7344 3/4 .7500 3/4 19.050 .7500 .7500

18.654 18.654

49/64 .7656 49/64 19.446 .7656 .7656 25/32 .7812 25/32 19.842 .7812 .7812

19.446 19.446

51/64 .7969 51/64 20.241 .7969 .7969 13/16 .8125 13/16 20.638 .8125 .8125

20.241 20.241

53/64 .8281 53/64 21.034 .8281 .8281 27/32 .8438 27/32 21.433 .8438 .8438 55/64 .8594 55/64 23.829 .8594 .8594

21.034 21.034

7/8 .8750 7/8 22.225 .8750 .8750 57/64 .8906 57/64 22.621 .8906 .8906 29/32 .9062 29/32 23.017 .9062 .9062 59/64 .9219 59/64 23.416 .9219 .9219 15/16 .9375 15/16 23.813 .9375 .9375 61/64 .9531 61/64 24.209 .9531 .9531 31/32 .9688 31/32 24.608 .9688 .9688 63/64 .9844 63/64 25.004 .9844 .9844 1.000 1.000 1.00011 25.400

19.050 19.050 19.842 19.842 20.638 20.638 21.433 21.433 23.829 23.829 22.225 22.225 22.621 22.621 23.017 23.017 23.416 23.416 23.813 23.813 24.209 24.209 24.608 24.608 25.004 25.004 25.400 25.400

Steel Steel (U.S. (U.S.Std.) Std.) 0.0329 0.0329 0.0299 0.0299 0.0269 0.0269 0.0239 0.0239 0.0209 0.0209 0.0179 0.0179 0.0164 0.0164 0.0149 0.0149 0.0135 0.0135 0.0120 0.0120

VALUE PROPOSITIONS

FASTENING SYSTEMS ENGINEERED FOR PERFORMANCE™ Benefits of Full Hex Rivet Nuts vs. Welded Hex Fasteners The challenge: A manufacturer of agricultural equipment was experiencing insufficient throughput rates in its baler product lines. • The issue was determined to be a result of the welding process used in the numerous attachment points. • The manufacturer wanted to improve the work environment by reducing the amount of emissions and vapors caused by the welding process. The solution: Working directly with the manufacturer, the Sherex engineering team designed a new line of full hex rivet nuts to meet the application performance requirements. • The new full hex rivet nuts significantly increased the application spin out resistance during installation.

• Additionally, the new solution eliminated all emissions and vapors associated with the welding process, which led to a safer working environment for the assemblers. The savings: Annual usage of the rivet nuts: 1,000,000

Cost savings: $0.12 per weld = $120,000 annual savings! Sherex is a global manufacturer with a unique market approach in engineered fastening solutions that combines fasteners, tooling, and automation to deliver the best solution at the lowest total installed cost.

• Sherex provided a complete installation solution to the customer: full hex rivet nuts and the FLEX-5 tool. • This new process replaced the previous welding process, increasing throughput by 50%.

Benefits of In-Die Fastener Installation vs. Welded Fastener Methods The challenge: A manufacturer of automotive safety systems was experiencing a high fallout rate at the attachment point of the seat belt retractor assembly.

• The new clinch nut automated process simplified the component manufacturing process by reducing the number of required steps and reduced on-site inventory.

• The failure was determined to be a result of the secondary welding process that was required to attach the nut to the sheet metal component.

The savings:

• This process caused a very high percentage of thread damage and distortion of the welded nut. The solution: Sherex introduced the manufacturer to an MDS automation in-die fastener installation system. • By utilizing the MDS automation installation system and incorporating a clinch nut design into the seat rail, the manufacturer was able to produce the sheet metal stamping and place the fastener in the same operation.

Annual part assemblies: 450,000

Cost savings: $0.37 per part = $166,500 annual savings! Sherex is a global manufacturer with a unique market approach in engineered fastening solutions that combines fasteners, tooling, and automation to deliver the best solution at the lowest total installed cost.

• This improvement eliminated the welding process that caused the thread damage. These are illustrative examples of actual experiences and are intended for sales purposes only. These are illustrative examples of actual experiences and are intended for sales purposes only.

Sherex Fastening Solutions

•

866-474-3739

•

www.sherex.com

•

info@sherex.com

SHEREX PRODUCT MATRIX Product Line

Body Style Round, Smooth

Round, Knurled

Slotted

Half Hex

Full Hex

Small Flange

CAH CA

CAO

Flat

Countersunk

CAK

Large Flange

CAL

Available Modifications

Standard Head Styles

FHK

FHL

X X

Other

Class 8 Proof Load

RoHs Compliant

Spin Out

Pull Out

Performance

Sealed Head

Plastics

Hard Steel

Thick Steel (>.5”)

Aluminum

P-

P+

Yes

P-

P+

Yes

P+

Yes

P-

Yes

P-

Yes

Proof Load Performance

Closed End

X X

Application Base Material

P+

Yes

P+

Yes

CFW

X *DIAMOND

P-

Yes

CAW

X *DIAMOND

P-

CFT

P-

Yes

CAT

P-

CPB

Yes

CPN

Yes

CFH

P+

Yes

CFHD

P+

Yes

P-

P+

Yes

P+

Yes

LRGR

LRGH

RFL

RFK

RFSL

RFSK

X X

UPO

UFO

UKO

HUPO

HUKO

X X

UPO RS

UFO RS

CLM

X 2

P+

Yes

P-

P+

Yes

P-

P+

Yes

P-

P+

Yes

P+

Yes

P+

Yes

P-

P+

Yes

P-

P+

Yes

P-

P+

Yes

P-

P+

Yes

X X

P-

CKM

1 1

1) May require special design features in plastics. 2) Stainless and carbon steel only, stainless steel HUPO/HUKO parts are half hex.

Rivet nut studs in all product styles (excludes CAT, CAW, CFT, and CFW lines) are available by custom order.

A: High B: Medium C: Low

R: Recommended P+: Possible, higher performance P: Possible P-: Possible, lower performance NR: Not recommended

Sherex Fastening Solutions

•

866-474-3739

•

www.sherex.com

•

info@sherex.com

Sherex Website and 3D Models Sherex SHEREX Website Sherex and 3D Models Website and 3D Models

sherex website

WEBSITE AND 3D MODELS sherex website sherex website

• Complete product catalog featuring thousands of unique parts • Complete product catalog featuring thousands of parts and sales drawings, sale sheets, pictures • unique Engineering and full product specs available online or as a • Engineering and sales drawings, sale sheets, pictures download for offline viewing. Complete product catalog and full product• specs available online or as afeaturing thousands of unique parts download for offline viewing.

• Engineering and sales drawings, marketing literature, pictures and full product specs available online or as a download for offline viewing. 3D Model Downloads 3D Model Downloads

3d model downloads • Sherex utilizes Solidworks® 3D modeling to offer full customization and design ®capabilities to our customers. • Sherex 3D website modeling offer full to Simply utilizes click theSolidworks button on our to to gain access customization and design capabilities to our customers. thousands of 3D Solidworks models. ® 3D modeling to offer full • Sherex utilizes Simply click the button on our website to gain access to customization and design capabilities to our customers. thousands of 3D models. Simply click the button on our website to gain access to • Solidworks® enables customers to select parts based on thousands of 3D models. style of interest, type ofcustomers material, to material thickness, • Solidworks® enables select parts basedopen on or ® closed end, and threadcustomers size. • Solidworks enables to select parts based on style of interest, type of material, material thickness, open or Once styleaofcustomer interest, type material, thickness, •closed has of selected thematerial required options,open or end, and thread size. closed end, and thread size. Solidworks® willhas create an 3Dthe model of the fastener for • Once a customer selected required options, placement into your modeling system. • Once a customer has selected required options, Solidworks® will create an 3D the model of the fastener for

Solidworks will an 3Dsystem. model of the fastener for into yourcreate modeling •placement Models are available in 60 different formats, ranging from placement into your modeling system. 3D XML to Universal 3D. Customers can view parts from any • Models available in 60download different formats, ranging fromuse. angle orare perspective, and CAD files for offline • Models available3D. in 60 different formats, ranging 3D XML toare Universal Customers can view parts from from any •angle aretoavailable for Imperial/Inch Full any Hex Models 3Dor XML Universal 3D. CustomersCAD canbody view parts from perspective, and download filesstyles, for offline use. angle or perspective, ® and download CAD files for offline use. rivet nuts, and Brass Inserts. • Models areRIV-FLOAT available for, Imperial/Inch body styles, Full Hex ®

•rivet can directly a quote from Sherex ®for •Customers Models are available Imperial/Inch body styles, Fullthrough Hex nuts, RIV-FLOAT , request and Brass Inserts. ® have a customer service rep follow the Solidworks site, and rivet nuts,can RIV-FLOAT , and Brass Inserts.from Sherex through • Customers directly request a quote up Solidworks with them promptly to discuss their unique the site, and have a customer serviceneeds. rep follow • Customers can directly request a quote from Sherex through

up them promptly to have discuss their unique with the Solidworks site, and a customer serviceneeds. rep follow up with them promptly to discuss their unique needs.

50 50

Sherex Fastening Solutions Sherex Fastening Solutions

• •

•

Phone: 866-474-3739 Phone: 866-474-3739

Sherex Fastening Solutions

•

Fax: 716-875-0358 Fax: 716-875-0358

866-474-3739

•

• •

www.sherex.com www.sherex.com

www.sherex.com

•

• •

E-mail: info@sherex.com E-mail: info@sherex.com

info@sherex.com

She

Sher

ADDITIONAL SHEREX PRODUCT LINES Sherex also offers a variety of additional product lines to meet customer application requirements: fasteners for thin sheet plastics

THREADED INSERTS

Threaded Inserts provide a strong threaded attachment point in soft or hard plastics and are ideal when post-mold installation is required.

MOLDED INSERTS

Molded Inserts provide a high performance threaded attachment point in soft or hard plastics, and are ideal for applications where inserts can be installed during the molding process.

COMPRESSION LIMITERS

Compression Limiters are used in conjunction with fasteners in soft or hard plastics applications to prevent overstressing of the base material and clamp loss of the fastened joint. Sherex’s compression limiters are custom engineered for the specific application.

LOAD BEARING NUT AND STUD PLATES

Load bearing nut and stud plates are metal plates with pre-installed fasteners. They allow superior joint performance using fasteners typically not used in plastics and composites and reduce fastener installation time on the production line. Sherex offers two types of load bearing nut and stud plates: Internally Threaded Nut Plates (with Clinch Nuts, Rivet Nuts, Riveting Nuts, or Threaded Inserts installed) and Externally Threaded Stud Plates (with Clinch Nuts or Rivet Nuts installed). All nut and stud plates are custom engineered to meet specific application requirements. fasteners for thin sheet metals

CLINCH NUTS

Clinch nuts are self-clinching, internally threaded nuts that are pressed into the base material. They are ideal for applications where there is access to both sides of the base material, and with high thread strength and superior pull-out force requirements. Sherex clinch nuts are available with a serrated clinch feature, a six-lobe clinch feature, or with custom riveting nut feature. vibrational loosening prevention ™

WEDGE LOCKING WASHERS

TEC Series wedge locking washers are heavy duty, resusable, self-locking washers designed to secure safety-critical applications against vibrational loosening. Manufactured using stamping process. Available in carbon and stainless steel sizes M3-M72, #5-3”.

WEDGE LOCKING WASHERS

Disc-Lock wedge locking washers are heavy duty, self-locking washers designed to secure safety-critical applications against vibrational loosening. Ideal for applications where reusability is not required. Manufactured using scrapless coldforming technology. Available in carbon steel sizes M3-M38, #6- 1 1/1 and in stainless steel sizes M6-M24, 1/4”-1”.

WEDGE LOCKING NUTS

Disc-Lock Wedge locking nuts are patented, heavy duty, self-locking nuts designed to protect joint integrity to secure safety critical applications against vibrational loosening. Available in sizes from M10 to M22, 3/8” to 7/8”.

Sherex Fastening Solutions

•

866-474-3739

•

www.sherex.com

•

info@sherex.com

SHEREX FASTENING SOLUTIONS

Â®

HEADQUARTERS:

SHEREX FASTENING SOLUTIONS 400 Riverwalk Pkwy, Suite 600 Tonawanda, NY 14150 Phone: 866-474-3739 E-mail: info@sherex.com www.sherex.com

PRODUCTION FACILITIES:

SHEREX AKRON

850 Moe Drive Akron, OH 44310 Phone: 234-205-1178 Fax: 716-875-0358

SHEREX TAIWAN

No. 201, Sandong Road Chungli City Taoyuan District, Taiwan 32053 Phone: +886 3-498-8689 Fax: +886 3-498-3543 E-mail: sales@sherex.com.tw SALES AND DISTRIBUTION FACILITY

SHEREX MEXICO S. DE R.L. DE C.V. Circuito Balvanera 5A Bodega 11 Parque Industrial Balvanera Corregidora, Queretaro C.P. 76900 Mexico Phone: +52 (442) 196-8354 E-mail: sales@sherexmexico.com ALL INFORMATION IN THIS CATALOG IS SUBJECT TO CHANGE WITHOUT NOTICE. THIS CATALOG IS UNCONTROLLED UNLESS VIEWED FROM THE FOLLOWING LOCATION: SHEREX.COM/TECHNICAL-INFO. PLEASE REFER TO THIS LOCATION FOR THE MOST CURRENT VERSION OF THE CATALOG.

C-RN 2/2019

AS9100, ISO 9001:2015 AND IATF 16949:2016 CERTIFIED