Compatible Heated hoses Equipment for the future We has been investing in the development of a new manufacturing system for the hoses in order to reduce production time, therefore product cost, and also guarantee a high repeatability in hose features. Continuous contribution of efforts to Research and Development in new technologies and components help us to assure a good quality and performance of our products.
New designs of our Technical Department with precise manufacturing process give our hoses the maximum reliability, aside from high flexibility and great efficiency of electrical consumption, so we can satisfy our customers’ needs and achieve profitable technical and economic factors to transport adhesives to the application point under the most suitable conditions. Anyway, our customer service capacity together with design and manufacturing means allow us to make special projects under customer requirements. If you need any further information about our compatible hoses, its applications or characteristics, don’t hesitate to contact our technical service department. Hose core is a high temperature PTFE pipe with low adherence so it can be used even with hard adhesives. It is reinforced with a steel mesh cover for high pressure applications (up to 100 bar according to working temperature and version).
Its careful and accurate production and the insulating materials give our hoses a uniform internal temperature, with a great stability in all the length, avoiding extra heated zones and preventing chars of the adhesive. Flexibility is one of the greatest features of these hoses. A wide range of accessories can be supplied with our hoses to be used as a complement of the installation. Fittings of different types and lengths, in line filter, thermal insulations for the fittings, hose extension corsets, fixation supports, etc., allow you to adapt the installation for the required particular characteristics of it.
TECHNICAL CHARACTERISTICS Standard diameters available Standard lengths available Max. working temperature Temperature sensors Max. working pressure Max. bending radius Hydraulic connection Electrical power supply
8, 13, 16 and 20 mm (internal) from 0.6 to 7.2 m increasing every 0.6 m; 8, 9, 10, 12, 13, 14 and 15 m 230°C RTD Pt100 or Ni120 (ask for other possibilities) 100 (Ø8) / 70 (Ø13) / 55 (Ø16) / 45 (Ø20) bar at 200°C 120 mm (for Ø8) female nut JIC 9/16’ (Ø8), 3/4’ (Ø13), M22x1.5 (Ø16), M30x1.5 (Ø20) 200/230V AC (control from melting unit) Standardization and compatibility of electrical connections
Wide range of accessories
Inner PTFE core reinforced with Steel mesh Different diameters available
New secure covers with minimum external diameter
New cover with greater insulation and more flexibility
Standard threads for every diameter Protecting cover with better wear resistance New resistance wire for higher durability
Glue-On ApS Lindvedparken 101 5260 Odense S Tlf.: 75711929 WWW.Glue-On.com