Tips for Dealing with Pool Pump Problems The pool pump ensures to run circulation and filtration system properly, regardless of whether it is in ground or above ground pool. It creates pressure inside the pool which leads water pass through filter. In this process, pump gets rid of debris, dirt, and other foreign particles from a pool. Pool management companies recommend to use high-quality pump as if it works well, your water will get purified. Pool pump is the heart of your pool, however, due to lack of maintenance the pool pump can stop functioning properly. This can shut down pool function immediately which is not a profitable deal for commercial pool owners. Due to advanced pool/aquatic technology, it is easy for professionals to rectify the issue. So, it is important to hire such professionals who have skills and use advanced technology. This enables them to provide efficient and reliable pool services. Pool management app GoAquatix allows to manage pool facility efficiently. With the help of this app, pool owner and employees can manage facility from a personalized dashboard set up for specific aquatic facility’s needs.
You can make aware about pool problems to professionals through this app. According to them, when it comes to dealing with pool pump, first pool owners should know when they should repair pool pump. Here are the most common pool pump problems and the ways to fix them. If your pool pump makes a noise it means it vibrates. Mostly, the noise will be the result of a vibrating pump. First check, loose screws in the base of the pump. If you find any, tighten them immediately. If you find a gap between the base and the pump itself; fill the gap with rubber mat to stop the vibration. Due to mud or dirt accumulated in pool pump, your pump stops to fetch pull water. First, clean the baskets to get rid of all the mud. Then check pump impeller. It is connected to the motor which is responsible for the flow of water. Because of the dirt, impellers usually get jammed over time. Therefore, open the pump and clear away all debris Due to a loose connection, the pump doesn’t work. Apart from this, lack of electricity, voltage fluctuations, and a blown fuse are also the main reasons to stop the functioning of the pump. If all these elements are working just fine, then your pool company staff may consider other possibilities.
If your pump doesn’t pull water, the first thing you need to check is to see if anything is stuck in the pump and skimmer basket. When too much mud or dirt gets accumulated, the pump will stop pulling water. You just need to clean the baskets to remove mud.