ECO RESILIENT FLOORING
KEY TAKEAWAYS KEY TAKEAWAYS
CONSTRUCTION Ultimate Sc Deep Struct Providing the loo Eco Compo CONVENIENT For fast & easy g Pre-Attached For additional co CONSTRUCTION Ulti Deep P Eco C F Pr F
Scratch-Stain-Wear Resistant Surface
Structured Decorative Layer
ok & feel of a premium hardwood / tiles
osite Core
NIENT CLICK SYSTEM
glue-less installation
ed Cork Backing
omfort and sound absorption
SAFETY & SUSTAINABILITY LET’S SAFETY & SUSTAINABILITY
UN IQ U E AND I NNO VATIVE 100% PVC / Plasticizers / PP free Eco Composite core Sustaina ble produc t Pa ten t Pend ing N e w C on s tru c tio n MAKE PLASTIC A THING OF THE PAST! UN IQ U E AND I NNO VATIVE 100% PVC / Plasticizers / PP free Eco Composite core Sustaina ble produc t Pa ten t Pend ing N e w C on s tru c tio n MAKE PLASTIC A THING OF THE PAST!
All our floors are home or the one
Eco Re All our home
SAFETY & SUSTAINABILITY
Eco Resilient Floor
SUSTAINABILITY
SAFETY &
Flooring were developed with a focus on sustainability and safety.
safe for our environment, whether that’s the one inside your we share outside.
Cork Pre Attached Backing
Saving up to 15kg of plastic vs. traditional flooring underlays would use for a 100 sqm install Up to 50%
Up to 50% RECYCLED CONTENT
RECYCLED CONTENT
IMPROVED LOADING FACTORS
• •
• •
IMPROVED LOADING FACTOR
CORK BACKING CORK BACKING
Cork 15
ould
your typi w
use
Cork backings allow s to s up to Kg of the cking plastic
15 pical flooring underlay use for a 100m² install!
ULTIMATE STABILITY
This test measure s the “memory” behavior of the product – abilit y to return to the original size prior to being heated up.
Test method:
The planks are heated up to 176°F (80°C), after which it is cooled dow n for 24h to the original temperature of 73.5°F (23°C). The size variation is measured and compared to the original size.
Results:
Eco R e s i li ent Fl oor ing is up to 2X more stable v s SPC , up to 4X more stable vs LVT and up to 8X more stable vs WPC * .
*Due to WPC’s strong curling and shrinking.
L OWE R IS BE TT E R U p to - 0.0 5% Standard LV T -0.1% -0.2% -0.3% -0.4% U p to - 0.45 %
R i g i d C o r e U p to - 0.2% U p to - 0.1%
St anda r d W P C
St anda r d
Eco Resilient Flooring
ULTIMATE STABILITY
ULTIMATE STABILITY
• N O UNSIGHTY TRANSITION MOLDINGS WI
Thanks to its Eco Composite Core, Eco Resilient
• N O UNSIGHTY TRANSITION MOLDINGS WITHIN 1,000
Thanks to its Eco Composite Core, Eco Resilie
Flooring is ultra stable – virtually not reacting to temperature and humidity variations.
Flooring is ultra stable – virtually not reacting temperature and humidity variations.
Which means:
Which means:
• The floor can be installed w ithout transition
• The floor can be installed w ithout transition
moldings up to 600 m2 even in doorways
moldings up to 600 m2 even in doorways
• The floor requires no acclimation
• The floor requires no acclimation
m2
ULTIMATE PERFORMANCE SCR Exceptional Wear Resistance *'Class 33 Very Heavy Commercial performance according to classification standard EN 16511 using test method EN 13329 (see standard TABER abrasion test) 21 22 23 31 32 33 Class 0.55 w ea PH EN OMEN vs PVC - bas ULTIMATE PERFORMANCE Exceptional Wear Resistance *'Class 33 Very Heavy Commercial performance according to classification standard EN 16511 using test method EN 13329 (see standard TABER abrasion test) 21 22 23 31 32 33 Class
RAT CHES
ear layer equivalent
AL scr atch r esistance
sed w ater pr oof floor
ST
STAI NS
N ot aff stai
N ot affected by most staining agents
Intro:
ULTIMATE PERFORMANCE
ULTIMATE PERFORMANCE
Deep Scratch Resistance - Higher is better
Intro:
Eco Resilient Flooring
Deep Scratch Resistance - Higher is better
This test measures resistance of a product to deep scratches; measured in grams.
Test method: ISO 1518
Results:
Test method: ISO 1518
Results:
• Eco Resilient Flooring is up to 27% better vs standard SPC.
• Eco Resilient Flooring is up to 27% better vs standard SPC.
• Up to 33% better vs standard WPC.
• Up to 33% better vs standard WPC.
• Up to 57% better vs standard LVT.
• Up to 57% better vs standard LVT.
This test measures resistance of a product to deep scratches; measured in gram
ULTIMATE PERFORMANCE
PERFORMANCE
Test met hod (E N 438):
Test met hod (E N 438):
1. There is a total of 19 staining agents in liquid or paste form. 2. The agents are added to a test sample's surface for a defined pe removed.
1. There is a total of 19 staining agents in liquid or 2. The agents are added to a test sample's surface removed.
3. Each agent is evaluated on a scale: 0 = no stain / 1 = slight / 2 = 4. Result is a sum of all points -> best = 0/57, worst = 57/57
3. Each agent is evaluated on a scale: 0 = no stain 4. Result is a sum of all points -> best = 0/57, wors
Eco Resilient Flooring is up to waterproof products available toda agents and the floor ’s surface rem
Eco Resilient Flooring is up to 15% more waterproof products available today. Eco Resi agents and the floor ’s surface remains clean ULTIMATE
Standard LV T
0 3 mm) Standard LV T
mm)
Industr
Leading Protectiv
(
( 0 55
Resilient
y
e Coating (0 55mm)
Standard LV T ( 0
mm) Standard LV T ( 0 55 mm) Resilient Industr
Leading Protectiv e Coating
55mm)
3
y
(0
min to 16 hours depending on the agent) and t hen
period (from 2min to 16 hours depending on the agent) and t hen
= intense
= moderate / 3 = intense
tain resistant than most ring resists most staining visible changes.
more stain resistant than most silient Flooring resists most staining with no visible changes.
Stain resistance Result 1=Good,57=bad SCORE tandard Rigid Core 16/57 72% lient Industry ing Protective 10/57 82% esilient Flooring 10/57 82%
Coffee Iodine Permanent marker Lipstick Shoe polish Stain resistance Result 1=Good,57=bad SCORE Standard Rigid Core 16/57 72% Resilient Industry Leading Protective 10/57 82% Eco Resilient Flooring 10/57 82%
Micro-scratch resistance EN 16094 Regular Coating Eco Resilient Flooring Pressure Applied (N) 16 32 Nbr of Revolutions 160 1000 TRITEC FINISH –MICRO SCRATCH RESIST Eco Resilient Floo up to 10x more scratch resistant other rigid core Micro-scratch resistance EN Regular Coating Pressure Applied (N) 16 Nbr of Revolutions 160 TRITEC FINISH –MICRO
Eco Resi up to scratch other rig
SCRATCH
TANCE
oring is more
than floors.
Resilient Up
x Better
to 10x Better
nt
EASE
Thanks to the floor ’s Eco Composite Core
Thanks to the floor ’s Eco Compos
Flooring is fast & easy to install directly over
Flooring is fast & easy to install dire
subfloor preparation, no telegraphing & no
subfloor preparation, no telegraph
TI LES CO NCRE
EASE
TI LES
onvenient click system, Eco Resilient
and a convenient click system, Eco Resilient
hard surface subfloors, with minimal climation!
er mos t hard surface subfloors, with minimal o acclimation!
WOO D
NCRETE WOO D
COL LECT
CTI ONS
Product Product size Thickness Eternity (8) 198 x 1215 mm 7 (incl. 1mm Cork) Eternity
120 x 600 mm 7 (incl. 1mm Cork)
240 x 1525 mm 7 (incl. 1mm Cork) Avenue
236 x 1830 mm 10 (incl. 2mm Cork)
Herringbone (4)
Eternity XL
(6)
(12)
Collections
Surface Bevel Click
Brushed Painted Bevel Angle-Tap
Painted Bevel Angle-Drop
Painted
Angle-Tap )
Painted
Angle-Tap Overall
EIR
EIR Brushed
EIR Brushed
Bevel
EIR Brushed
Bevel
Embossed
C o ll e
Ete r
Ete
t y c t i o n
ni
Ete r
Ete
C o ll e
t y c t i o n
ni
Eternity 2859 2856 Product size Thickness 198 x 1215 mm 7 (incl. 1mm Cork) 2860 2867 Eternity 2859 2856 Product size Thickness 198 x 1215 mm 7 (incl. 1mm Cork) 2860 2867
2863 2852 Bevel Click Painted Bevel Angle-Tap 2865 2866 2863 2852 Surface Bevel Click EIR Brushed Painted Bevel Angle-Tap 2865 2866
E t e r n it y He C o ll e E t e r n it y
He rri ngbone
c t i o n
E t e r n it y He C o ll e E t e r n it y
He rri ngbone
c t i o n
Eternity Herringbone
2866 2860 Product size Thickness 120 x 600 mm 7 (incl. 1mm Cork) Eternity
2866 2860 Product size Thickness 120 x 600 mm 7 (incl. 1mm Cork)
Herringbone
2856 2863 Bevel Click Painted Bevel Angle-Drop 2856 2863 Surface Bevel Click EIR Brushed Painted Bevel Angle-Drop
C o
ll e E ter
E ter ni
ty X L
c t i o n
ni
E ter ni
C o ll e
ty X L
c t i o n
ni
1877 187 1872 1876 Product size Thickness 240 x 1525 mm 7 (incl. 1mm Cork) Eternity XL 1877 1872 Product size Thickness 240 x 1525 mm 7 (incl. 1mm Cork)
Eternity XL
1871 1874 Bevel Click Painted Bevel Angle-Tap 1870 1871 1876 1874 Surface Bevel Click EIR Brushed Painted Bevel Angle-Tap
A ve C o ll
e
A ve
nu e
c t i o n
A ve C o ll
e
A ve
nu e
c t i o n
Avenue 1812 1813 1144 1149 Product size Thickness 236 x 1830 mm 10 (incl 2mm Cork) Avenue 1812 1144 Product size Thickness 236 x 1830 mm 10 (incl 2mm Cork)
1814 1140 Bevel Click Painted Bevel Angle-Tap 1813 1814 149 1140 Surface Bevel Click EIR Brushed Painted Bevel Angle-Tap
1767 1776 Avenue 1793 1442 Product size Thickness 236 x 1830 mm 10 (incl 2mm Cork) Ov Overall Em 1767 Avenue 1793 Product size Thickness 236 x 1830 mm 10 (incl 2mm Cork)
1768 1462 Overall Embossed Bevel Click Painted Bevel Angle-Tap 1776 1768 1442 1462 Overall Embossed Surface Bevel Click EIR Brushed Painted Bevel Angle-Tap erall Embossed mbossed
FOLLOW US FOLONLOW
SOCIAL MEDIA
