Cleans

HANDOVER CLEANS

3 3

- Your unit is installed and cleaned . - Call Goplay to book in your biannual cleans. - You have received your handover package . - Depending on your area, you may need to have your - You have signed off on the installation . playground unit cleaned every 3 months. Please call Goplay to discuss and schedule your playground

INSPECTIONS

4 4

- Please call Goplay to book in your annual maintenance inspection. - Ask us about our subscription based, fully inclusive care plan.

INSPECTIONS

Your new playground has the added benefit of being low maintenance . Whilst the equipment will require minimal maintenance, inspections should be carried out on a regular basis in order to ensure that equipment is in correct running order .

There are several factors that will affect how frequently your inspections and maintenance checks need to be carried out . Some factors include:

• High level of use • Coastal location • Older equipment • Lower levels of supervision

On the following pages you will find an inspection timetable listing the items on your playground equipment that should be checked at each inspection . We have also included an example routine inspection sheet to help you get your inspection schedule up and running .

INSPECTIONS

We recommend the following schedule of inspections in order to keep a properly maintained play area .

It is recommended that your Playground Auditor:

• Is a certified and experienced Playground Auditor and Safety Inspector . • Has extensive knowledge of the playground standards . • Is fully insured (Professional Indemnity and Public Liability minimum 5 million AUD) .

Routine Inspection

This should be carried out each day prior to use, or once in every 24 hour cycle . Visual inspections should identify obvious hazards such as foreign objects and dirty or damaged parts . This can be carried out by a member of staff .

Operational Inspection

This is a more detailed inspection to check the operation and stability of the equipment, in particular for wear . This should be carried out by a Goplay Playground Auditor .

Comprehensive Inspection

A comprehensive inspection should be carried out annually .

This is done to establish the overall safety of the equipment, foundations and surfaces . This will also assess any change in the safety of the equipment resulting from repairs made, or from added/replaced components . This should be carried out by a Goplay Playground Auditor .

INSPECTION CHECKLIST

The items listed below are specific to the Goplay playground system and are intended as a guide only . The equipment should be checked during operational and comprehensive inspections to be in accordance with all relevant sections of AS 4685 SET:2014

Check the entire playground for miscellaneous debris or litter

Check for damage caused by vandalism or misuse

Check that equipment is clean and dry

Check surfacing materials for foreign debris or objects

Check rubber surface areas for damage or deterioration

Check that slides are clear and the sliding surface is clean and safe to use

Check that crawl tubes are clear and that the surfaces are clean

Check that entrances and exits are clear, in particular slide exits

Check that all fasteners securing panels are in place and are firmly tightened

Check that all tube connecting bolts are in place and are firmly tightened to 20 Nm

Routine Operational Comprehensive

INSPECTION CHECKLIST

Check all polycarbonate panels and windows for cracks, specifically around bolt holes Check bolts securing polycarbonate panels & windows are in place and are tightened to 10 Nm

Check slide surfaces for raised cuts or scrapes

Check equipment for sharp edges or protrusions

Check fence & gate post attachments

Check that gate locking mechanism works correctly

Check that foundation bolts are secure

Check welds for cracks and corrosion

Check all steel components for corrosion

Check plastic tubes for cracks - specifically around flanges

Check that steering wheels are firmly connected and rotate freely

Routine Operational Comprehensive

Problems Identified or Observed

ROUTINE INSPECTION SHEET

EXAMPLE

Check the entire playground area for miscellaneous debris or litter . Check for damage to playground equipment, features and the outer fence caused by vandalism or wear . Check surfacing materials for foreign objects or debris . Inspect rubber surface areas for damage or deterioration . Check that slides are clear and free and that the sliding surface is clean and safe to use . Check that crawl tubes are clear and free and that the surfaces are clean . Check entrances and exits are clear . In particular check that there are no objects within the exit areas of slides .

Action Required

Rectified? Y / N Y / N Y / N Y / N Y / N Y / N Y / N

Checked By: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Signed: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Date: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .