aad39.ps
1/9/15
3:15 AM
Page 39
QUICK REFERENCE: TRANSPORTS
DERCO AEROSPACE, INC. 8065 West Fairlane Milwaukee WI 53223 www.dercoaerospace.com 414-355-3066 derco@dercoaerospace.com FAX: 414-355-6129 Mailing Address: POB 250970 Milwaukee WI 53225 Northrop Grumman Corporation 19382 Baywatch Lane Huntington Beach CA 92646 www.northropgrumman.com 818-715-3290 FAX: 818-598-2089 Pacific Propeller Inc. PO Box 1187, 5802 S. 228th Street Kent WA 98032 www.pacprop.com 253-872-7767 FAX: 253-872-6557 Contact: Al Hayward ahayward@pacprop.com FAA CRS# NQ3R719L /P3 BLADE MANUFATURER
AS THE PLANES WE
SUPPORT F4/F5/F16 A leader in the aerospace innovative concept of one stop shopping for military aerospace requirements
&
BEARINGS
Dixie Aerospace Suite 100, 560 Atlanta S. Pkwy. Atlanta GA 30349 Telex: 542141 SITA: ATLDBXD 404-348-8100 Toll Free: 800-241-8471 FAX: 404-763-2577 www.dixieaerospace.com sales@dixieaerospace.com MECANEX USA INC 119 White Oak Drive Berlin CT 06037 860-828-6531 www.mecanexusa.com FAX: 860-828-6533 Contact: Patricia Saglimbeni sales@mecanexusa.com
MIRAJ CORPORATION 345 Route 17, P.O. Box 70 Hasbrouck Heights NJ 07604 201-288-8877 Contact: Fred Scheps - Sales Mgr. FAX: 201-288-7356 www.mirajcorp.com mirajcorp@aol.com
CABLE FITTINGS CABLE FITTINGS
CABLE & WIRE CABLE & WIRE AIRBORNE TECHNOLOGIES, INC. 999 Avenida Acaso Camarillo CA 93012 805-389-3700 Contact: Gary Ferris FAX: 805-389-3708 Repair Station #WY2R283L P.O. Box 2210 Camarillo CA 93011 www.airbornetech.com sales@airbornetech.com
ARINC AEROSPACE CORPORATION 6400 S.E. 59th Street Oklahoma City OK 73135 www.arinc.com/defense 405-605-7184 FAX: 405-601-6029 Contact: Alex Thagard athagard@arinc.com Canfield Electronics, Inc. 90 Remington Blvd. Ronkonkoma NY 11779 Contact: Ray Zaun 631-585-4100 www.canfieldelectronics.com FAX: 631-585-4200 info@canfieldelectronics.com WWW.ABDONLINE.COM
•F -5 F4/J 79
6400 S.E. 59th Street Oklahoma City OK 73135 www.arinc.com/defense 405-605-7184 FAX: 405-601-6029 Contact: Alex Thagard athagard@arinc.com LOOS & COMPANY INC. Wire Rope Division 1 Cable Rd. Pomfret CT 06258 860-928-7981 www.loosco.com FAX: 860-928-6167 Toll Free: 800-533-5667 900 Industrial Blvd Naples FL 33942 239-321-5667
15042 Whittram Ave Fontana, CA 92335 Ph: 909-829-3031 • Fax: 909-350-3630 www.qaviation.com
&
ARINC AEROSPACE CORPORATION
T38 /J8 S5 61 •F /T -1 58 6/F •C 10 H0 & 53 F1 /T 10 64 •O •A -4 V/J5 10 2 /T •A 76 -7 •E /T -3 F4 /T 1 F3 •C 3 -1 •E 30 -2 /T & 56 P3/T •K 56 C13 5/J 57
BEARINGS
SERVICE AS FAST
TF 33
ASP Avionics NV/SA Vliegplein 2 Bus 1 Genk Belgium B-3600 FAX: +3289386659 +3289384345 www.asp-avionics.com Contact: Vande Voorde CASCADE AEROSPACE - An Operating unit of IMP Aerospace and Defence 1337 Townline Road, Abbotsford BC Canada V2T 6E1 604-850-7372 www.cascadeaerospace.com FAX: 604-557-2655 DAC International 6702 McNeil Drive Austin TX USA 78729 512-331-5323
Cobham Antenna Systems, Inc. 596 Lowell Street Methuen MA 01844 978-557-2497 www.cobham.com FAX: 978-557-2800 Joy Leuis jouy.leuis@cobham.com Continental Cable Company 253 Monument Rd. Hinsdale NH 03451 603-256-3136 FAX: 603-256-6003 LOOS & COMPANY INC. Wire Rope Division 1 Cable Rd. Pomfret CT 06258 860-928-7981 www.loosco.com FAX: 860-928-6167 Toll Free: 800-533-5667 900 Industrial Blvd Naples FL 33942 239-321-5667 Northrop Grumman Corporation 19382 Baywatch Lane Huntington Beach CA 92646 www.northropgrumman.com 818-715-3290 FAX: 818-598-2089
CONNECTORS CONNECTORS Avnet Electro Air 400 Franklin Road Ste 260 Marietta GA 30067 em.avnet.com/electroair 800-241-7530 Contact: Beth Boedeker FAX: 770-799-4945 beth.boedeker@avnet.com
BENCHMARK CONNECTOR CORP. 4501 N.W. 103rd Ave Sunrise FL 33351 Contact: Wayne Nelson 954-746-9929 Toll Free: 800-896-7153 FAX: 954-746-9448 www.benchmarkconnector.com info@benchmarkconnector.com Canfield Electronics, Inc. 90 Remington Blvd. Ronkonkoma NY 11779 Contact: Ray Zaun 631-585-4100 www.canfieldelectronics.com FAX: 631-585-4200 info@canfieldelectronics.com Connector Distribution Corp. 2985 E.Harcourt St. Rancho Dominguez CA 90221 www.cdc-online.com 310-632-2466 Toll Free: 800-421-5840 FAX: 310-632-5413 ** Inventory Avialable on abdonline.com Electronic Expediters, Inc. 3700 Via Pescador Camarillo CA USA 93012 Contact: Ira Berns 805-987-7171 FAX: 805-987-3344 www.expediters.com sales@expediters.com H S Electronics, Inc. P.O. Box 126010, 1665 W. 33rd Place Hialeah FL 33012 305-821-5802 FAX: 800-823-6691 Contact: Larry Campbell/Paola-Cara
AVIATION AFTERMARKET DEFENSE | WINTER 2014/15
39
3 D Machine Company, Inc. Anaheim, CA 92807
Contact name:
Costel Falcusen
Phone: 714 777-8985 URL:
3dmachineco.com
3D Machine is a woman-owned CNC job shop that prides in quick turn around of jobs that require precision metal cutting. Our quality system complies to the ISO 9001:2000 standard and our prices are VERY reasonable. Quick turnaround is a common reality, since we are small but very effective. 4th Dimension PCB, Inc. Sunrise, FL 33323-1517
Contact name:
MARK S. ECKERT
Phone: 954 240-3600 URL:
www.pcb-design.com
4th Dimension PCB is dedicated to providing quality Printed Circuit Board design services, utilizing experienced designers, at affordable rates, in a ""timely"" manner. Visit us at http://www.4thdpcb.com A B M Precision Metal Work, Inc. West Babylon, NY 11704
Contact name:
A. Marino
Phone: 631 694-1850 URL: job shop serving various industries , such as aerospace ,specializing in grumman spare parts. A D Machining Anaheim, CA 92806
Contact name:
Jay Dutt
Phone: 714 632-7035 URL:
admachining.com
Defense and aerospace job shop machining. A P Labs San Diego, CA 92127
Contact name:
Justine Johnson
Phone: 858 674-2870 URL:
http://www.aplabs.com
AP Labs is the premier provider of COTS solutions, custom turnkey products, specializing in the design, development and manufacturing of rugged enclosures and integrated systems for high-
Sj,\||MWAGER
end defense, aerospace and commercial markets. AP Labs provides single point-of-contact for design, test and support of complex systems, whether it's complete systems containing scores of racks or single enclosure. Supported by its Manufacturing Services Division, AP Labs also provides in-house precision sheet metal fabrication, wiring harnesses, circuit card and enclosure assemblies. a&v engineering, inc COMPTON, CA 90220-5444
Contact name:
VIC KUYUMJIAN
Phone: 310 637-9906 URL: aerospace machine shop, prototypes and production. A. M. Precision Machining. Inc. Elk Grove Village, IL 60007
Contact name:
Andy Kozlowski
Phone: URL: http://www.amprecision.com A.M. Precision Machining, Inc. (AMP) is a woman owned, ISO-9000 registered, small business machine shop, that is family operated out of Elk Grove Village, Illinois. AMP provides 3, 4, and 5 axis machining up to 30” X 30” X 60”, turning capacity of up to 94” diameter and EDM capabilities for the aerospace, military, power generation, oil drilling, and other various industries. AMP specializes in low to medium volumes and materials ranging from aircraft aluminum to aerospace exotics such as Inconel, titanium, beryllium, waspalloy, and hastalloy. Secondary operations include full in house tool room, lapping, gundrilling, and assembly. AMP works to customer specified tolerances. Recognized by major customers as “Certified Supplier” and “Self Release – Source Inspection”. Recent awards in 2002 include “Supplier of the Year for 100% on-time delivery and 100% quality from major customer in power generation industry and “Best Quality Program Implementation” from MTAPP- Air Force Outreach program. Recently expanded facilities to eastern Europe in near by Warsaw, Poland. A.E. Petsche Co., Inc. Arlington, TX 76012-3696
Contact name:
Alan Petsche
Phone: 817 461-9473 URL:
http://www.aepetsche.com
A.E. Petsche Co., Inc. is a distributor of aerospace wire and cable and associated products. Acknowledged as the world's largest stocking distributor of Aerospace wire and cable A.E. Petsche Company also offers JIT inventory programs. A.K.A. Engineering Chino, CA 91710
Contact name:
Alan J. Arena
Cotronics_FederalBG_2015_Federal BG PG 1/15/15 9:38 AM Page 1
HIGH TEMPERATURE MATERIALS FOR ELECTRICAL l STRUCTURAL l INDUSTRIAL l MEDICAL APPLICATIONS TO 4000ºF Flexible Conductive Silver Based Epoxy Duralco™ 125 thermally conductive electrical epoxy bonds to most metals, ceramics and plastics to form a stress-free adhesive bond. Continuous service up to 450ºF.
High Temperature Low Expansion Adhesive Resbond™ 905 Quartz is formulated for bondng low expansion and thermal shock resistant ceramics. Ideal for electronic and metallurgical applications to 2500ºF.
Thermally Conductive Adhesives Duralco™ 132 thermally conductive adhesives combine Cotronics’ unique, high temperature resins with highly conductive fillers to form thermally conductive, adhesive bonds with continuous service up to 500ºF.
High Expansion Adhesive Thermeez™ 7030 bonds and protects to 1800ºF. Apply to ceramics, ceramic cloths, door and tadpole gaskets and metals. Excellent adhesion to steel, stainless, aluminum, lead and ceramics.
High Purity, Alumina Adhesive Protects Critical Electronic Components Resbond™ 989 offers continuous protection to 3000ºF. Apply directly to metals, glass, ceramics, graphite and silicon carbide. Provides high bond strength and excellent electrical, moisture, chemical and solvent resistance for bonding and sealing.
You have challenging applications… we have solutions! High Temperature Products Since 1971
131 47th Street, Brooklyn, New York 11232-4225 Call: 718.788.5533 Fax: 718.788.5538 Email: sales@cotronics.com Web: www.cotronics.com
TECH SUPPORT I CUSTOM FORMULATIONS I QUANTITY PRICING
Phone: 909 627-9725 URL:
www.akaengineering.com
A.K.A. Engineering is a dynamic company at the forefront of engineering for Vehicles, Simulation, Theme Parks, and Sustainable Energy Solutions. Our force and motion simulation techniques are in use at NASA, US Air Force and Navy, and Theme parks and Museums around the world. Services also include CAD design and drafting, dynamic and kinematic analysis, finite element analysis, technical reports and equipment troubleshooting. a.m.e. metals inc. Amherst, OH 44001
Contact name:
ERIX INFANTE
Phone: 440 985-3749 URL:
amemetals.com
metals service center. specializes in continuous cast, centrifugal cast, sand casting of all copper alloys. oil impregnated sintered bronze, finished machine parts. and cast iron products. power transmission, fluid transport, aerospace, drilling, shipbuilding. bushings, bearings, bridge plates. wear plates, A.S. Thomas Inc. Westwood, MA 02090
Contact name:
DAVID THOMAS
Phone: 781 329-9200 URL:
www.asthomas.com
Founed 1955, R&D firm providing high-end CAD/CAM software, manufacturing process development and support, expert system. Services include 2-5 axis macining for low volume and prototype production. Specialize in 5-axis contouring, complex surfaces, airfoils, feed screws, medical, aerospace, defense... A2Z Global Languages Network Haddon Township, NJ 08108-1825
Contact name:
THEODORA LANDGREN
Phone: 856 833-0220 URL:
www.a2zglobal.com
TRANSLATION AND PUBLISHING IN ALL LANGUAGES for 30 years.Value Star Award for highest customer satisfaction. We translate technical information into 50+ foreign languages, nonclassified, and provide interpreters, audio recordings Worldwide network experts in: Computer based training modules, websites, computer software and hardware, communications, astrospace, aerospace, medical products, defense systems, AEGIS program material. Excellent project managers, and a full time staff to handle all of your foreign language needs anywhere. AAI Services Corporation Hunt Valley, MD 21031-1305
Contact name:
Trina Lawrence
Phone: 410 628-3484 URL:
aaicorp.com
AAI Services, headquartered in Hunt Valley, MD, offers an array of services either at the customer's location or from our regional technology centers in Maryland, South Carolina, Utah, Oklahoma, and Florida. AAI Services specializes in engineering and modifications, operations and maintenance, logistics products, and training and simulation. AALL AMERICAN Fasteners Cinnaminson, NJ 08077-2560
Contact name:
Kimberly A. Tenenbaum
Phone: 856 786-7799 URL: Fasteners, Electrical Hardware, MS/AN/NAS Hardware AAR Aircraft Component Services - NY Garden City, NY 11530-2188
Contact name:
ROBERT SOPP
Phone: 516 357-2757 URL:
www.aarcorp.com
AAR specializes in Repair & Overhaul, Test Equipment and Training Services for Aerospace Components. ABB AAS Quebec (ABB Bomem inc.) QUEBEC, Qu G1K 9H4
Contact name:
Michel Gaudreau
Phone: 418 877-2944 URL:
www.abb.com/analytical
ABB Analytical and Advanced Solutions, QuĂŠbec (formaly BOMEM) designs, manufactures and markets high-performance FT-IR/NIR spectrometers for the chemical & hydrocarbon processing, pharmaceutical, metallurgical and dairy industries. We also offer FT-IR spectrometers and spectroradiometers for research, environmental, academic, semiconductor, aerospace, and remote-sensing applications. Our instruments can be used for QA/QC in the laboratory or on-line. Visit our web site at www.abb.com/analytical Able Industrial products, INC ONTARIO, CA 91761-7709
Contact name:
GILBERT MARTINEZ
Phone: 909 930-1585 URL:
www.able123.com
ABLE Industrial Products, Inc. has been servicing companies locally, nationally, and internationally since 1974.Our Class 10,000 climate controlled clean room meets the strict Federal Standard 209E cleanliness requirements of the Automotive, Computer, Medical, and Aerospace.ABLE INDUSTRIAL PRODUCTS IS A DISTRIBUTOR OF ABRASIVES ADHESIVE
AND PRESSURE SENSITIVE TAPES. 3M, LOCKTITE,PERMACEL, CHR, AMERICAN TAPE, AND GE PRODUCTS ARE JUST SOME OF THE QUALITY MANUFACTURES THAT WE REPRESENT. AS AN ADDED VALUE SERVICE WE SPECIALIZE IN THE CUSTOM MANUFACTURING OF GASKETS, ROTARY DIE CUTTING & FABRICATION OF VARIOUS TYPES OF MATERIALS SUCH AS FOAM, SPONGE,CORK,FELT AND RUBBER PRODUCTS.We're ISO 9000:2001 certified by Intertek Systems, we are also a SBA certified SDB. Able Industrial Products, Incorporated Ontario, CA 91761
Contact name:
Mr. Harold J. Martinez
Phone: 909 930-1585 URL:
www.able123.com
Able Industrial Products is a distributor of Industrial Supplies, for 3M, Loctite, General Electric, etc. Able performs laminations, fabrications, slitting, conversion, rotary/die cutting to customer specifications. Plus, Specialty Tapes, Adhesives, Abrasives, Silicone Sealants, Loctites, Converter/Laminator of Weatherstripping, Closed Cell Neoprene Sponge, Poly Foam, Solid Neoprene Rubber & Plastics. ACA Associates New York, NY 10017-3647
Contact name:
Donald P. Schenk
Phone: 212 808 URL: http://www.aca-assoc.com
ACAS Jupiter, FL 33478
Contact name:
Manuel Loret de Mola
Phone: 561 747-0294 URL:
www.acas-inc.com
ACAS provides the Aircraft Industry with Full Turn Key Service, including; Complete Conceptual Design, Design/ Engineering, FAA Approval/ Certification and Liaison/ Interface Support for Manufacturing & Installation.Our expertise addresses all issues related to aesthetic Design, Acoustic Interior Panel System, Seating, Cabinetry Components, Lighting, Entertainment Systems, Mechanical / Electrical Systems and all emergency requirements. FAA Certification STC, 8110-3, PMAWe also manufacture Aircraft CNC machined parts and kits. Accurate Automation Corporation Chattanooga, TN 37421
Contact name:
REBA L. PAP
Phone: 423 894-4646 URL:
www.accurate-automation.com
Accurate Automation Corporation is an innovative aerospace firm specializing in advanced
Unmanned Aerial Vehicles (UAVs) and Guided Missiles. Accurate Automation has been responsible for the design, development, testing, and manufacturing of UAVs such as the X-43ALS, LoFLYTEŽ, GLOV™, and MLOV. Our aircraft include our family of unique jet engines, advanced adaptive flight controls, flight computers, telemetry subsystems, and data acquisition subsystems. Also available are innovative image compression and authentication tools for secure real time transmission via satellite. AAC is a pioneering developer of plasma aerodynamics and EW protection systems. Our customers include the United States Army, Navy, Air Force, NASA, and the National Science Foundation. Accurate Electronics, Inc. Chatsworth, CA 91311
Contact name:
Alex Hazrati
Phone: 818 882-5858 URL:
www.accurate-elec.com
Accurate Electronics is an Electronic Contract Manufacturing company specializing in Turnkey and Consignment PCB assembly for over 26 years. Our customers include leaders in the aerospace/defense, medical, telecommunications, automotive and consumer industries.Accurate Electronics has earned the following certifications AS 9100, ISO 13485, ISO 9001; additionally we are ITAR compliant. Accurate Metal Machining Inc. Willoughby, OH 44094
Contact name:
John Racic
Phone: 440 951-8404 URL:
www.accuratemetalmachining.com
Specialize in the machining of stainless steel, high temperature and non-ferrous metal components for the aircraft, aerospace, defense, semi-conductor, valve, fitting and medical industries. Accutrex Products, Inc. Canonsburg, PA 15317
Contact name:
Lauren W. Naumoff
Phone: 724 746-4300 URL:
www.accutrex.com
ISO 9002 Veteran-owned manufacturer of custom shims,laminated shims, gaskets, special washers, metal stampings and sheet metal fabrications. Manufacture AccuPeel laminated shim stock. Offer laser and waterjet cutting services. Accuturn Corporation Riverside, CA 92507-0784
Contact name:
Iggy Araujo
Phone: 951 656-6621 URL:
www.accuturncorp.com
Precision Swiss Screw Machine components.Precision CNC ComponentsComplete fabrication of contacts, Shafts, Screws, Fixtures etc. Areas Served: Aerospace, (Military,and Commercial) Automotive, Appliance, Computer, Electronic and Medical. ACE GRINDING & MANUFACTURING OF TEXAS Grand Prairie, TX 75052
Contact name:
KAREN CARLISLE
Phone: 972 6604666 URL: We have been in business for 24 years. We manufacture and distribute various kinds of aerospace fasteners (bolts, screws, washers, nuts, pins and studs). Ace Grinding & Mfg. Of Texas, Inc. Grand Prairie, TX 75052-7636
Contact name:
Karen Carlisle
Phone: 972 660-4666 URL:
no http://
MANUFACTURER & DISTRIBUTOR OF AERSPACE FASTENERS ACells Corp. Vista, CA 92081-8323
Contact name:
David M. Allen
Phone: 760 727-6666 URL:
www.AmCells.com
AmCells designs and manufactures a broad line of electronic scales, load cells & instrumentation for the weighing industry. AmCells combination of high quality and low cost is unbeatable. AmCells also manufactures custom force measurement and weighing systems for cranes, trucks, forklifts, offshore oil platforms, medical, military & aerospace applications. AmCells can provide private labels, standard, semi-standard & custom products or systems to customer specifications. AmCells specializes in difficult applications. Acheson Colloids Company Port Huron, MI 48060
Contact name:
Christine Haas
Phone: 810 984-5581 URL:
www.achesonindustries.com
Globally positioned manufacturer and supplier of electronic materials, specialty coatings, process lubricants, and lubricant application equipment. Products provide value in applications throughout the electronics, automotive, aerospace, appliance and other technology critical industries. ACI Technical Services Inc. New Carlisle, OH 45344
Contact name:
Mark Peters
Phone: 937 882-9500 URL:
www.acitechserv.com
ACI Technical Services Inc. is a small disadvantaged minority owned distributer of military, areospace, and commercial wire, cable, and small electronics. Acme Electric Corporation Tempe, AZ 85282
Contact name:
Gary L. Lesser
Phone: 480 894-6864 URL:
acmeelec.com
Custom designer and manufacturer of emergency backup power supplies for both aerospace and groundbase applications such as; charge control units for all battery technologies, ""Zero Maintenance"" Nicad Battery, converters, inverters, power control units,transformers, etc. Acme Metals & Recycling, Inc. Springfield, MA 01104-2435
Contact name:
George R. Sachs
Phone: 413 737-3112 URL:
http://www.acmerecycling.com
Processor, broker, of all ferrous and non-ferrous metals. We provide container and crane services. Affiliate, Commodity Resources of NE recycles paper, office waste programs. Serving commercial, trades, and industrial accounts since 1938 Acme Portable Machines, Inc. Azusa, CA 91702
Contact name:
Jimmy Chang
Phone: 626 610-1888 URL:
www.acmeportable.com
ACME Portable Machines, Inc. was founded in 1994, with the headquarters located in Los Angeles, California. ACME is committed to quality in all of our products with its skilled engineers and technicians. It is dedicated in bringing the most integrated portable computer in the marketplace. All ACME portables are designed and manufactured right down to detailed specifications. ACME portables have been proven effective in meeting the most demanding environments and out perform others in critical applications such as data acquisition, analyzing LAN/WAN and telecommunication signals. The ruggedness also allows for function welling in manufacturing facility, as well as in the medical field for diagnostics and aerospace applications. All of this knowledge has allowed ACME to become the leader in portable computing. We take advantage of the latest technology advancements to meet the ever demanding needs of today and the future. Combining power, portability and durability unseen before, the ACME Lunchbox Portable is truly defined as the ""Power to Go"". Acroamatics, Inc Goleta, CA 93117
Contact name:
Patricia Johnson
Phone: 805 967-9909 URL:
www.acroamatics.com
Acroamatics is a leading supplier of telemetry systems for ground stations, airborne telemetry and other defense, aerospace and deep space applications. ACROHELIPRO Global Services Inc Richmond, Br V7B 1A4
Contact name:
Dave McGrath
Phone: 604 276-7685 URL:
www.acrohelipro.com
ACROHELIPRO Global Services Inc. is a subsidiary of Vector Aerospace Corporation; providing comprehensive maintenance, repair and overhaul(MRO support for Sikorsky, Bell and Eurocopter helicopters. Headquartered at the 158,000 sq/ft maintenance facility in Richmond, British Columbia, Canada, the company has five additional state-of-the-art MRO facilities located throughout Canada and the United States. Whether you require maintenance, repair, total overhaul, or field technical support, ACROHELIPRO?s team of dedicated professionals will meet your needs. Capabilities include engines (overhaul capabilities include GE CT58/T58, T64 and T700; Rolls Royce Model 250; Turbomeca Arriel; and Pratt & Whitney Canada PT6T), dynamic components, airframe/structures, avionics repair and new equipment installations, rotor blades and accessories. ACROHELIPRO?s in-house engine and dynamic components test cell capability further enhances its wide range of OEM-approved programs. This wide-variety of expert services and technical resources further assures customers of an on-going commitment to providing only the highest quality products and services, and clearly illustrates world-class capabilities as a tip-to-tail MRO service provider for the rotary wing aerospace industry. ACROHELIPRO consistently operates with one clear objective: getting its clients back in action?safely, reliably, and precisely on schedule.ACROHELIPRO; ""Excellence in Helicopter Mainteance."" Acton Technologies Pittston, PA 18640
Contact name:
Lauren J Marsh
Phone: 570 654-0612 URL:
www.actontech.com
Acton Technologies is the world leader in the surface modification of fluoropolymers and has been successfully etching all fluoropolymers including PTFE and PVDF among others. Acton also manufactures the chemicals for modifying the surface of fluoropolymers to enable adhesion. Acton's products and services are employed by industry leaders in the areas of aerospace, automotive, electronics and semiconductors, fiber optics, medicine, energy, environmental and more. Acton Technologies, Inc. Pittston, PA 18640-0726
Contact name:
Lauren Marsh
Phone: 570 654-0612 URL:
www.actontech.com
High-performance plastics processor and manufacturer founded in 1947; leader in the surface modification of fluoropolymers for all industries including aerospace, automotive, computer, defense, electronic, medical & commercial. Providing batch & continuous contract etching of fluoropolymer films, printed circuit boards, machined & molded parts, wire, tubing & microparticles and calendering & orienting of fluoropolymer films. ADCO Circuits Inc. Rochester Hills, MI 48309-3514
Contact name:
Marc Damman
Phone: 248 829-4677 URL:
www.adcocircuits.com
ADCO Circuits is an ISO/TS 16949 certified Electronic Manufacturing Service (EMS) provider of class II and class III circuit card assemblies and systems. Since 1981 ADCO has been servicing the industrial, automotive, military/aerospace, telecommunications, and medical markets by supplying engineering and manufacturing services for prototypes and volume production.Capabilities include but are not limited to TH, SMT, Micro BGA, Flex, and Box Builds. Test resources include a staff of degreed engineers to formulate test plans and execute ICT, Functional Test, and Burn In. Automated conformal coating and potting processes are also available. An experienced staff of Project Managers, Manufacturing Engineers, and Quality Engineers, all contribute to a proven launch process that greatly reduce the risks common with new programs. ADCO’s modern facility is 43,000 square feet and equipped with both an epoxy floor and an automated humidification system throughout for ESD control. An automated stockroom and on-line systems for procurement, documentation, and quality tracking, ensure compliance to customer specifications and allow for quick reaction to engineering and schedule changes. Two SMT flex lines, two wave-solder lines, and flexible manufacturing cells for off-line operations enable ADCO to configure the facility for efficient throughput of diverse designs Adco Industries, Inc. JENKS, OK 74037-3739
Contact name:
CAMERON CUMMINS
Phone: 918 299-0066 URL: DISTRIBUTOR - AEROSPACE - COMPOSITE AND METAL BONDING Addison Precision Mfg. Rochester, NY 14615-3308
Contact name:
George Chapman
Phone: 585 534-9538 URL:
addisonprec.com
Contract manufacturer of aerospace toleranced machined parts for the aircraft,space,missile,marine,medical, and defense industries.Capabilities include CNC ID/OD Grinding,CNC Swiss Turning, CNC Milling, CNC Wire/Sinker Edm. Admill Machine Co Newington, CT 06111-5522
Contact name:
Evan R. Axenroth
Phone: 860 667-3676 URL: Admill Machine is a small business that specializes in the machining and manufacture of aerospace quality parts under 18 inches in diameter. Admill Machine uses the latest manufacturing techniques and processes to offer the customer with the best cost and delivery options, while maintaining unequaled customer satisfaction . Adtek Photomask Montreal, QC H4T 1J6
Contact name:
Peter Erhart
Phone: 514 737-7030 URL:
www.adtekphotomask.com
Adtek Photomask is a long established merchant photomask manufacturer, supplying a full range of Optical and E.Beam/Laserwrite photomasks to the semiconductor and related industries for over 25 years.Our customers include both large multinationals and smaller companies. We handle the toughest applications for microelectronic manufactures, leading university/government laboratories and photonic reasearch centers.Applications range from MEMS, military, medical, computer, aerospace, opto-electronic, and telecomunications sectors through to pure research.All of our customer, both big and small, receive Personalized Service from the Adtek team. Our highly trained profesionals find the best possible solution for each individual application within a quick turnaround time. We subscribe to ""on-time"" delivery policy. Advanced Aerospace Metals BROKEN ARROW, OK 74012-8725
Contact name:
Mike Atteberry
Phone: 918 254-7022 URL: Advanced Aerospace Metals is a supplier of quality welding wires for the Military,Aerospace and Defense Industry. We supply AWS and AMS products. We supply wires in GMAW,GTAW and SMAW processes. Advanced Cerametrics, Inc. Lambertville, NJ 08530-0128
Contact name:
R B Cass
Phone: 609 397-2900 URL:
www.advancedcerametrics.com
Advanced Cerametrics (ACI)designs and manufactures advanced ceramic materials, ceramic fibers, piezoelectric fiber composite transducers, actuators and energy harvesting composites. ACI sells to the aerospace, automotive, medical, electronic, textile and sports industries. Products include, smart, actively controlled tennis rackets and skis; acoustic transducers; sonar transducers; energy scavenging transducers; vibration reduction transducers; insulators; ceramic fiber for metal and ceramic matrix composites; thread guides; wear surfaces; and porous ceramics.
ADVANCED COMPOSITE PRODUCTS AND TECHNOLOGY INC Huntington Beach, CA 92649-1507
Contact name:
Ryan Clampitt
Phone: 714 895-5544 URL:
www.acpt.com
Design, develop, and manufacture structures and hardware from advanced composite materials (graphite, fiberglass, and Kevlar). Are fully certified to ISO 9001:2008 AND AS9100:2009 Rev C. Qualified and approved by most major aerospace firms and provide items for the US military. Equally adept at industrial and aerospace/military applications Advanced Global Materials, Inc. Brookhaven, NY 117189746
Contact name:
SEAN HALL
Phone: 631 218-8890 URL:
www.advancedglobalmaterials.com
Distributor of specialty metals, Valves, Flanges, Fittings. Copper, Brass, Alloys, Stainless Steel, Nickels, Tantalum, Molybdenum, Aluminum and many more. Plate, Sheet, Bar, Tube, Pipe and forgings. Advanced Laser Machining Inc CHIPPEWA FALLS, WI 54729
Contact name:
JOHN WALTON
Phone: 715 720-8093 URL:
www.laser27.com
Precision metal fabrication. Aerospace components, industrial truck components. Advanced Machining Inc. Longmont, CO 80501-6170
Contact name:
Cleve Tuck
Phone: 303 485-5256 URL: High precision machining and plastic injection, vendors include aerospace, laser and Hi Tech Advanced Optics, Inc. Pewaukee, WI 53072-0
Contact name:
WENDY HEIL
Phone: 262 548-1155 URL:
www.advancedoptics.com
Manufacturer of precision and custom optical components for aerospace, medical instrumentation, academics and research, and industrial applications. OEM production and
prototype quantities available. Products include optical flats, front surface mirrors and optical grade windows. Advanced Sensing Products The Woodlands, TX 77380
Contact name:
Angie Chi
Phone: 281 681-9342 URL:
www.aspsensors.com
Advanced Sensing Products (ASP) is a manufacturer of temperature sensors. We specialize in precision industrial resistance temperature detectors (RTDs), working standard platinum resistance thermometers (PRTs), secondary standard PRTs, and thermocouples. Our temperature sensors have excellent accuracy and stability with a wide temperature range. We also offer temperature sensor calibration services with certificate data traceable to National Institute of Standards and Technology (NIST). Our products are sold both in the U.S. and international markets. Advanced Technologies Inc Newport News, VA 23606
Contact name:
Paul W. Thomeer
Phone: 757 873-3017 URL:
www.advancedtechnologiesinc.com
Advanced Technologies Incorporated (ATI) is a leading supplier of quality aerospace research and development products delivered on schedule. ATI provides engineering and fabrication services and produces a wide variety of wind tunnel models, test equipment, composite fan blades, prototype hardware, full-scale mock-ups and models, training devices, and has specialized expertise developing composite rotor blades, rotor test stands, experimental helicopters, and unmanned air vehicles (UAV's). ADVANCED TECHNOLOGY CO Pasadena, CA 91107-3778
Contact name:
JEAN DESILVESTRI
Phone: 626 449-2696 URL:
http://www.at-co.com
MANUFACTURER OF AIRCRAFT COMPONENTS INCLUDING ACOUSTIC FILTERS AND NOISE DAMPENERS, FOR COMMERCIAL AND MILITARY APPLICATIONS. JOB SHOP SERVICES IN MATERIALS JOINING: ELECTRON BEAM WELDING, LASER WELDING, CUTTING AND DRILLING, MANUAL AND AUTOMATIC GTA WELDING. COMPLETE MACHINE SHOP INCLUDING CONVENTIONAL AND CNC MILLS AND LATHES. NEW LASER MARKING MACHINE. CERTIFIED AS9100/ISO 9001:2008, NADCAP, DCMC AND BY ALL MAJOR AEROSPACE COMPANIES. WE ARE WOMAN OWNED SMALL COMPANY IN BUISNESS SINCE 1971. FOR MORE INFORMATION LOG ONTO AT-CO.COM. Advanced Telemetrics International Spring Valley, OH 45370-8708
Contact name:
Phil Merrill
Phone: 937 862-6948 URL:
http://www.atitelemetry.com
Advanced Test Equipment Rentals San Diego, CA 92121-1526
Contact name:
Chris Reed
Phone: 888 554-2832 URL:
www.atecorp.com
Advanced Test Equipment Rentals is a provider of test and measurement equipment for Defense, Communications, EMC, Aerospace and related industries. We carry equipment from several key manufacturers such as, AEMC, Agilent, Amplifier Research, Anritsu, Fluke, Haefely, IFI, Rohde & Schwarz, Teseq/Schaffner, Yokogawa and many more. Headquartered in San Diego, California, Advanced Test Equipment Rentals has over 29 years of experience and ships to clients worldwide. Additional information about Advanced Test Equipment Rentals is available at http://www.atecorp.com. Advanced Tool Corporation Camarillo, CA 93012
Contact name:
DEAN FRALEY
Phone: 805 482-1280 URL:
HTTP://WWW.ATCRACING.COM
Precision Machine Shop with CNC Mills and Lathes,EDM's, and Toolmaking.ATC provides precision tooling,prototypes,short-run production parts, contract assembly, and engineering design services. Advanced Training Systems International, Inc. Mesa, AZ 85212
Contact name:
Isobel Redfield
Phone: 480 792-6203 URL:
www.atsifightertraining.com
At its international flight operations center at the former Williams Air Force Base near Phoenix, Arizona, ATSI offers world-class fighter combat training services for U.S. State Department approved nations - and for the U.S. Navy, Marines, and Air Force. At Williams, ATSI delivers integrated flight training using a mixed squadron of McDonnell Douglas A-4 Skyhawks and twoseat TA-4 Skyhawks. ATSI specializes in tactical aviation training and professional flight test services for the aerospace industry. ATSI's highly experienced instructor pilots provide extensive expertise in training regimens ranging from basic jet flight training to Fighter Weapons School. Aerie Group, The Fairfax, VA 22030-5813
Contact name:
Giuseppe Fascione
Phone: 703 266-3244 URL:
www.aeriegroup.com
The Aerie Group companies have been serving the needs of the aerospace industry since 1989. We are an international management consulting, aircraft marketing and aerospace engineering services group, headquartered in the Washington DC area, with offices in Rome, Italy and a worldwide network of associates. Our team is comprised of highly successful professionals from the international aerospace industry, each having demonstrated exceptional achievements. Aero Chip Inc Gardena, CA 90248
Contact name:
Liviu Pribac
Phone: 310 329-8600 URL:
aerochip.com
Precission machine parts. Specialized in aerospace. Approved by all major aerospace companies. Small, minority owned, SBA approved. Aero Defense Components, Inc. MC HENRY, IL 60050-7036
Contact name:
LINDA HAMM
Phone: 815 385-4141 URL: Distributor of Aircraft and Aerospace Fasteners and Hardware Aero industrial tool co.,inc. Sarasota, FL 34240
Contact name:
FRANK MOSCA
Phone: 941 379-5444 URL:
www.aerotools.com
DISTRUBITOR OF PNEUMATIC AND HAND TOOL FOR AIRCRAFT INDUSTRIES.STOCKING DISTRIBUTOR FOR CP,ARO,CHERRY,DESOUTTER,HUCK,DOTCO,CRAIG,MARTIN CUTTING TOOLS,SCHEAFER MACHINE,US INDUSTRIAL TOOL AND MORE AERO INDUSTRIAL TOOL CO.INC. Sarasota, FL 34240-9509
Contact name:
ina mosca
Phone: 516 5421300 URL:
http://WWW.AEROTOOL.COM
selling pneumatic and hand tools to the aircraft and aerospace industries. Aero Mac Inc Mukilteo, WA 98275-5016
Contact name:
DICK CARLBURG
Phone: 425 348 4140 URL:
aeromacinc.com
SATURATION SHOT PEENING PRIMARILY TO AEROSPACE REQUIREMENTS, I.E.BOEING BAC 5730, BOMBARDIER BAPS 185-002 AND SAE AMS-S-13165/MIL-S-13165. CAPABLE OF SHOT PEENING UP TO 51 FEET LONG STRINGER ON AWHEELABRATOR CONVEYOR SYSTEM SUPPORTED BY TWO PANGBORNS ANDSEVERAL MANUAL MACHINES. LOCATED ADJACENT TO THE BOEING EVERETTASSEMBLY PLANT. PRE/NADCAP APPROVED, AS 9100B APPROVED AND ISO 9001 REGISTERED SUNCE 2004. AERO SPRING & MFG CO INC Phoenix, AZ 85040-2889
Contact name:
CRAIG M ROTH
Phone: 602 2434329 URL:
asm@qwest.net
Build to print fabrication, machining, and small assembly for aerospace and related industries. Approved source for most prime contractors and subcontractors. AS9100, ISO9002, and MILSTD-45208 compliant. AeroBiz.Net, Inc Mesa, AZ 85210
Contact name:
Russ Isley
Phone: 215 275-8617 URL:
aerobiz.net
AeroBiz.Net, Inc is a one-stop aviation solutions company. Specializing in Aerospace Engineering, Maintenance Training, FAA Certification, Technical Publications, Computer Programming, Data Conversions, Web Development, Software Evaluations, Needs Analysis, Records Auditing. Aeroflex / Weinschel Frederick, MD 21703
Contact name:
Barry Newlin
Phone: 301 846-9222 URL:
www.aeroflex-weinschel.com
Aeroflex / Weinschel develops, manufactures, markets, and sells high quality microwave and RF components and subsystems for wireless mobile, defence and broadband infrastucture and test applications. Weinschel¡¦s mission is to provide superior design capabilities, products of consistent high quality, innovative solutions, and a high level of service to help its customers compete in today¡¦s demanding world markets.The company was founded in the 1940's and offered the world's first commercially available coaxial attenuators. In 1952, the company founders formed Weinschel Engineering Co., and continued to pursue the advancement of microwave technologies. In 1994, Weinschel's Quality Management system is approved to: ISO 9001, EN 29001, BS5750: Pat1: and ANSI/ASQC Q9001-1994. Today Weinschel, a subsidiary of MCE Technologies, Inc., is a name acknowledged to be synonymous with high reliability, quality, technical competence and leadership in the state-of-art microwave components and subsystems.
Weinschel products are employed in standards laboratories, OEM, test facilities, quality control and manufacturing departments of most communications and aerospace companies as well as defence, government agencies and private research firms throughout the world. Applications include satellite and ground communications systems, radar, OEM, signal analysis, telecommunications, air traffic control, and precision microwave related instruments and system use. Weinschel¡¦s product line includes Programmable step attenuators including PIN, FET, relay and edge-line technologies, resistive power splitters, dividers, high power (up to 1000 watts) and low passive IM fixed attenuators, coaxial terminations, continuously variable and manual variable attenuators, Planar Blind-mate and Planar Crown connector systems, SmartStep components and RF simulation subsystems. Aeroflex / Weinschel, Inc. Frederick, MD 21703
Contact name:
Barry Newlin
Phone: 301 846-9222 URL:
www.aeroflex-weinschel.com
Aeroflex / Weinschel develops, manufactures, markets, and sells high quality microwave and RF components and subsystems for wireless mobile, defence and broadband infrastucture and test applications. Weinschel¡¦s mission is to provide superior design capabilities, products of consistent high quality, innovative solutions, and a high level of service to help its customers compete in today¡¦s demanding world markets.The company was founded in the 1940's and offered the world's first commercially available coaxial attenuators. In 1952, the company founders formed Weinschel Engineering Co., and continued to pursue the advancement of microwave technologies. In 1994, Weinschel's Quality Management system is approved to: ISO 9001, EN 29001, BS5750: Pat1: and ANSI/ASQC Q9001-1994. Today Weinschel, a subsidiary of MCE Technologies, Inc., is a name acknowledged to be synonymous with high reliability, quality, technical competence and leadership in the state-of-art microwave components and subsystems. Weinschel products are employed in standards laboratories, OEM, test facilities, quality control and manufacturing departments of most communications and aerospace companies as well as defence, government agencies and private research firms throughout the world. Applications include satellite and ground communications systems, radar, OEM, signal analysis, telecommunications, air traffic control, and precision microwave related instruments and system use. Weinschel¡¦s product line includes Programmable step attenuators including PIN, FET, relay and edge-line technologies, resistive power splitters, dividers, high power (up to 1000 watts) and low passive IM fixed attenuators, coaxial terminations, continuously variable and manual variable attenuators, Planar Blind-mate and Planar Crown connector systems, SmartStep components and RF simulation subsystems. Aeroflex RAD, Inc. Colorado Springs, CO 80919
Contact name:
Malcolm Thomson
Phone: 719 531 URL: www.aeroflex.com/rad Aeroflex RAD offers Radiation Effects Testing, engineering, & consulting. Tests include TID, ELDRS, NEUTRON, PROMPT FLASH XRAY, PROTON and SEE (SEL, SET, SEU, SEGR). Also we offer a line of RAD HARD MOSFETs compatible with many IR MOSFETS. A 14bit Rad Hard A to D converter is shipping. Aero-Glen, Inc. Richardson, TX 75081
Contact name:
GLENDA STICKNEY
Phone: 972 234-0984 URL:
www.aeroglen.com
WOMAN OWNED SMALL BUSINESS. ISO 9002:1994 CERTIFIED Aeroprodutcs Inc. Charlotte, NC 28210-4313
Contact name:
ANDREW MARGONIS
Phone: 704 566-8350 URL: INDEPENDENT PARTS DISTRIBUTOR FOR THE FOLLOWING COMPANIES:AIRMAZE(DONALDSON) FILTERS, HONEYWELL INTNL, TEXTRON LYCO-MING, HAMILTON SUNDSTRAND, AIRCRAFT BRAKING SYS., LEAR ROMECPRATT & WHITNEY CANADA, GRIMES AEROSPACE, LORD CORP., ITTFLUID TECHNOLOGIES, ROLLS ROYCE, PTI FILTERS, ALLIED SIGNAL,CESSNA, TELEDYNE, FACET FILTERS AND WOODWARD GOVERNOR. Aero-Safe Technologies Inc. Fort Erie, On L2A 5N1
Contact name:
Anthony E rodway
Phone: 905 871-1663 URL:
www.aerosafe.ca
Since 1981 aero-safe technologies inc. has been a high precision CNC manufacturing and assembly supplier to the aerospace, satellite communications, surveillance, defence, optical and medical industries.We are located in Fort Erie, Ontario Canada on the beautiful Niagara Peninsula. Our 25,000 square foot temperature controlled facility employs 50 plus highly skilled people. We are extremely proud of our in-house apprenticeship training program.The talented people in our production engineering department at aero-safe have a comprehensive background in manufacturing, tooling and fixture design.Our Cad/Cam department is equipped with IBM Intellistation M-Pro workstations each sporting the latest versions of IronCad and EdgeCam Professional for machining directly from solid models.Electronic data exchange is our preferred method of manufacture. We are capable of handling nearly any type of data format that our customers require.Manufacturing capability includes precision CNC machining, assembly, microscopic and electro-chemical deburring as well as high precision CMM inspection.The milling department at aero-safe is equipped with 17 precision Matsuura CNC machining centers.The turning department is equipped with 8 precision CNC Nakamura turning centers.EDM machines are AGIE wire and sink.The deburring department consists of two temperature controlled areas employing 9 skilled deburr operators. Equipment includes 5 Leica stereo microscopes (up to 40X magnification) with attached video monitors.Since 1999, aero-safe technologies inc., has been ISO 9002 registered.The quality control department is an 875 square foot environmentally controlled area staffed by skilled QC inspectors. This department is fully equipped with a wide range of conventional inspection gauges and measuring equipment as well as 2 CNC co-ordinate measuring machines.Aero-safe Technologies has 2 subsidiaries Aero-Safe Processing andAeroSafe Devices.Processing is capable of chemical cleaning, chemical convertion coatings (MIL-C5541), passivation (QQ-P-35), anodizing (MIL-A-8625), black oxide.Testing includes salt spray, adhesion,thickness, and coating weight.Devices supplies air cargo equipment,parachute
mechanical dereefers, light weight cargo quick disconnects. Aerospace & Commercial Tooling, Inc. Ontario, CA 91761
Contact name:
Oscar Borello
Phone: 909 930-5780 URL:
www.actooling.com
In operation for over 10 years. Build to order tooling, parts, sub-assemblies, small assemblies, sheet metal forming capabillities, CNC, CAD, CAM, CAE, CAI. Reverse engineering. Tooling (Hard and soft tooling). Hot forming, super plastic forming (SPF). Small-minority, veteran owned business. Cage 08JK5 AEROSPACE AND COMMERCIAL TOOLING INC ONTARIO, CA 91761-5788
Contact name:
OSCAR BORELLO
Phone: URL:
AEROSPACE CONTROL PRODUCTS INC. DAVENPORT, IA 52806-1305
Contact name:
William K. Stout
Phone: 563 391-6051 URL:
http://www.cmeflow.com
Manf pressure switches and float switches for aircraft. Also Manf. laminar type gas flow meters, claibrators and associated instrumentation. Product line includes automatic gas flow measurement test stands used for testing various gas regulators and other devices Aerospace Control Products, Inc. Davenport, IA 52806-1305
Contact name:
William K. Stout
Phone: URL:
Aerospace Data International La Habra, CA 90632-3121
Contact name:
Thomas J. LaPorte
Phone: 562 697-2668 URL:
www.aerospacedata.com
ADI is a Veteran-Owned company that specializes in Aircraft Systems Design Documentation Services for the development and maintenance of Wiring Diagrams, System Schematics,
Equipment/Component Lists and associated data. ADI services new designs, upgrades, modifications, and conversions of existing documentation to include Service Bulletins & Engineering Order change incorporations. AEROSPACE DISTRIBUTORS, INC. FEDERAL WAY, WA 98003
Contact name:
Pierre Pinsonnault
Phone: 253 661-9600 URL:
WWW.AEROD.COM
Aerospace Distributors is a leading, worldwide aftermarket supplier of new and overhauled aircraft parts and equipment for commercial and military aircraft. We are subscribers to Aeroxchange, ILS, OneAero, Partsbase, various internet online services, giving us instant access to airlines and overhaul facilities around the world.To find out more about Aerospace Distributors, Inc., visit our webiste at www.aerod.com Aerospace Elite Electronics Inc. Largo, FL 33774
Contact name:
RYAN ESPOSITO
Phone: 727 394-9000 URL:
AEROSPACEELITE.COM
WE ARE A SUPPLIER OF ACTIVE AND PASSIVE BOARDLEVEL COMPONENTS. Aerospace Engineering and Research Associates Lanham, MD 20706
Contact name:
Kathryn Bowlin
Phone: 301 459-7890 URL:
www.freeflight.com
Aerospace Engineering is located just outside Washington D.C. With over 15 years of experience, we are one of the most established companies in CNS, and Air Traffic Management (ATM) business. We provide consulting and supply of leading-edge software tools for Air Traffic Control, Air Traffic Management and Flight Planning Applications. We offer scientific programming and analysis expertise. Aerospace Engineering and Research Associates, Inc Lanham, MD 20706-6309
Contact name:
Kathryn Bowlin
Phone: 301 459-7890 URL:
www.freeflight.com
Aerospace Engineering and Research Associates, Inc. (Aerospace Engineering) offers a highly skilled team of dedicated professionals with ands on aviation system development experience and offer services related to developing and deploying aviation systems. Aerospace Engineerng
Herzliya, Is 46663
Contact name:
Moti Kaplan
Phone: +972-50 789-7855 URL:
www.aerospaceeng.com
Aerospace Engineering is a developer and manufacturer of illuminated switch panels, instrument bezels and control assemblies for the aerospace industry and military ground vehicles. Aerospace Fabrication & Materials, LLC Farmington, MN 55024
Contact name:
Robert W. Blume
Phone: 651 463-8500 URL:
www.aerospacefab.com
Contract manufaturer of thermal and corrosion protective products. Aerospace Instrument Support, Inc. Denton, TX 76207
Contact name:
Mark Care
Phone: 940 566-0035 URL: We are a FAA Certified Repair Station (CRS# XI7R807J)Class 1, 2, 3, & 4 Ratings. Aerospace International Representatives, LLC Anaheim, CA 92807
Contact name:
Sheri Chaffin
Phone: 714 777-9850 URL:
www.isellair.com
Very small woman-owned minority business located in a HUB zone - providing all aerospace products, parts and out-sourcing of overhaul and repair. Currently holding large lots of L188, Pe, C130, C17 and A10 parts. Specialize in hard-to-find parts and exendables and consumables. . Currently a Boeing Silver Supplier and Quality certification ISO9001:2000 and AS9100. Quality Manager: Graham Barton. AEROSPACE KNOB CO CHINO, CA 91708-1797
Contact name:
D ROBINSON
Phone: URL:
Aerospace Products, Inc. Haltom City, TX 76117-5347
Contact name:
John Denton
Phone: 817 332-1669 URL:
www.apipaints.com
Woman owned small business. Distibutor and repackager of aircraft sealants, coatings,lubricants and adhesives. Aerospace Sales Industries, Inc. Westminster, MD 21157
Contact name:
Bonnie Starck
Phone: 410 871-2140 URL:
aerospacesales.com
Small business, veteran/minolity owned electrics distributor specializing in wire, cable, connectors, backshells, tubing, network equipment, fiberoptic cable and connectors, ICs, enclosures, raceway. Services both government and commercial industry. Aerospace Services International, Inc. Herndon, VA 20171-2233
Contact name:
BILLIE H. VINCENT
Phone: 703 322 URL: www.asiwebsite.com Aerospace Services International, Inc.(ASI) provides a wide range of consulting and professional services to government organizations and the transportation industry, particularly in regard to aviation; and cargo and multi-modal transportation systems. Our extensive, worldwide experience has direct application to government regulatory agencies, air carriers, airport authorities, communications/navigation/surveillance system development and service providers, multinational corporations, seaport authorities, and other organizations with systems that are potentially vulnerable to deliberate interference, weather events, political changes, or accidents. We address each client's needs through a comprehensive analysis, vulnerability assessment, requirements determination, program and systems design, financial analyses, implementation, and training.Coordinated System Elements.ASI strongly believes that modern technology alone is not the answer. Technical assets must be combined with well planned processes, and a knowledgeable and motivated staff into a unified protection system reinforced by management that is responsible and accountable. This system must be frequently evaluated and promptly updated as organizational changes and environmental circumstances evolve. A well planned system with adequate resources, especially well-trained and motivated people combined with the right mix of equipment and procedures will ensure the most effective level of preparedness needed to withstand damaging occurrences. Aerospace Technologies Inc. Fort Worth, TX 76112-7306
Contact name:
Doug Epperson
Phone: 817 451-0620 URL:
Aerospace Technologies, Inc. Lilburn, GA 30047
Contact name:
Michelle Nash
Phone: 770 564-0500 URL:
www.atiworldwide.com
We supply military aircraft hardware. AN,MS,NAS standards as well as hard to find items. Large inventory including L1011, B707, Vickers and Goodrich. Lockheed approved, CCR registered. We will work hard on any type of items that you require. Close to Hartsfield International and export to companies world wide. aerospace technology group North Olmsted, OH 44070
Contact name:
Dr. Guion S. Bluford, Jr.
Phone: 216 925-1010 URL:
no http://
Consulting organization which provides engineering support, business development, risk assessment, and engineering analysis in the development and application of innovative aerospace technologies to support government and industry needs. Customers include NASA, Department of Defense, and industry. Aerospace Wire & Cable Co. Flushing, NY 11356
Contact name:
Richard Chen
Phone: 718 358 2345 URL:
http://www.aerospacewire.com
MANUFACTURER OF HIGH TECHNOLOGY ,HIGH TEMPERATURE WIRE ANDCABLE. SPECIALIZED TEFLON INSULATED WIRE AND CABLE, CUSTOMDESIGNED WIRE AND CABLE. QUICK DELIVERY AND EXCELLENT PRICE. Aerospacedefense manufacturing MARYSVILLE, WA 98271
Contact name:
Kevin Richardson
Phone: 360 653-8124 URL:
Aero-tech Tooling Services, Inc. Marietta, GA 30007-0756
Contact name:
Julie W. Stith
Phone: 770 578-9994 URL:
www.aerotechtool.com
We consult on aerospace production and program topics. AGC Incorporated Meriden, CT 06451
Contact name:
Michael Doolan
Phone: 203 317-2630 URL:
www.agcincorporated.com
Aerospace spare part manufacturer specializing in Hot forming of titanium, complex sheet metal and machined assemblies, as well as, composite to metal bonding. Originally a rubber and plastic molding manufacturer AGC Incorporated has evolved over the last 50 years to meet the demanding aerospace market. Agfa NDT Inc. Lewistown, PA 17044
Contact name:
Rosemary Olson
Phone: 717 2420327 URL:
http://AgfaNDT.com
Agfa NDT is your supplier of complete NDT solutions. Now, with innovative new products and extensive support from the Krautkramer Ultrasonic Systems, HOCKING Eddy Current Pantak Seifert X-ray Systems, RADView Digital Systems and STRUCTURIX Film Systems product lines, Agfa s Non-Destructive Testing Business Group is positioned as the leading global NDT solutions provider for the major technologies of ultrasonic, x-ray, digital and film systems. Agiltron, Inc. Woburn, MA 01801
Contact name:
Geoffrey Burnham
Phone: 781 935-1200 URL:
www.agiltron.com
AGILTRON is a rapidly growing developer and manufacturer of advanced fiber-optics, photonics, optical components, IR imagers, sensors, nanoparticle coatings and other high tech products. Agiltron’s products include high speed optical switches, couplers, attenuators, delay lines, splitters, specialty fibers, fiber splicing systems, optical systems, imaging systems along with other products and systems. Agiltron serves the high tech specialty photonics markets with highly differentiated products providing industry leading performance and value. The Company offers both standard products and customer-driven development/manufacturing products and services. Our customers include the DoD and major US Aerospace/Defense companies and cable/telecom companies around the globe. Agio Precision Industries, Inc. Mamaroneck, NY 10543
Contact name:
Benito Scimia
Phone: 914 381-5252 URL:
Agio Precision Industries ia a small machine shop engagingin the manufacture of precision parts to bueprint specifications for the aerospace, military, aviation, medical and electronic industries.Our 8000 square foot facility is fully equiped with modern CNC lathes and milling centers, Swiss automatic screw machines to 1/2"" capacity, and all supporting equipment.We supply metal,alloy, and plastic parts turned and milledto size and with all required finishes and treatments. Airborne Systems Pennsauken, NJ 08109-1309
Contact name:
Emmanuelle Celicout
Phone: 856 3822746 URL:
www.airborne-sys.com
Parachutes and Parachutes Systems for handling persons and loads,namely space and air vehicle recovery parachutes, seat ejection parachutes, boat delivery parachutes, deceleration parachutes for high-performance aircraft, and weapons delivery parachutes namely deployment handles and release mechanisms, fittings,lines, straps, and harnesses for handling persons and loads, integrated oxygen masks all sold as a unit; brake chutes as used in industrial, defense, and military operations for the retrieval of people and cargo loads, all sold as a unit in International Class 9 Airco International Huntington Beach, CA 92649
Contact name:
KATHY TODOROVICH
Phone: 714 379-9116 URL: SMALL ARMS BRASS, BULLETS, AND AMMUNITION. AIREPS, INC. ANAHEIM, CA 92807
Contact name:
Sheri Sue Chaffin
Phone: 714 777-9850 URL:
www.isellair.com
Distributor of aerospace hardware, expendables, consumables and out-sourcing overhaul services. Airmo, Inc., Pressure Technologies速 Minneapolis, MN 55433
Contact name:
Harry Moran
Phone: 763 786-0000 URL:
www.airmo.com
Airmo is the leading designer/manufacturer of patented testing, hydro-expansion, and endforming systems, tooling, and components with capabilities up to 60,000 PSI. Our testing equipment includes pressure systems and tooling for leak testing with gases such as air,
nitrogen, helium, and liquids such as water, glycol, oil, fuel and others.Our quick-couplings/quickdisconnects are favored by oil and gas and aerospace industries and are rated up to 60,000 PSI. We manufacture stand-alone pressure pumps, check-valves, relief-valves, accumulators, airbleed-valves, regulators, and other components. Alcoa Inc. Rockdale, TX 76567
Contact name:
Thomas E. Leary
Phone: 724 337-5467 URL:
www.alcoa.com/smd
Alcoa is the world's leading producer of primary aluminum, fabricated aluminum and alumina. It serves customers in the aerospace, automotive, packaging, building and construction, commercial transportation and a wide variety of industrial markets. Aldine Technologies Industries, Inc. East Rutherford, NJ 07073-1621
Contact name:
Peter Gould
Phone: 973 4055155 URL:
aldinetechnologies.com
Specialty Non-Woven Manufacture and converter.Products for the Aerospace,Optical,Medical,Art restauration,Electronics,Tea,Coffee, Herbal Filters, and other non linting uses. ALEXCO, L.L.C. Chandler, AZ 85226-5215
Contact name:
Naomi Rodriquez
Phone: 866 5253926 URL:
www.alexcoaz.com
Producer of aluminum extrusions for the aerospace market. Alinabal Inc. Milford, CT 06460
Contact name:
TILSIA
Phone: 203 877-3241 URL:
WWW.ALINABAL.COM
THE ENGINEERED PRODUCTS GROUP PROVIDES A WIDE RANGE OF MANUFACTURING CAPABILITIES FROM SIMPLE STAMPINGS TO COMPLEX ASSEMBILIES, INCLUDING MEDICAL, COMMERICAL, AEROSPACE, ELECTRICAL, INDUSTRIAL, AUTOMOTIVE AND DEFENSE. THE ENGINEERED PRODUCTS GROUP IS QS 900,ISO 9002 AND 9000 COMPLIANT. All Metals & Forge Group,llc Fairfield, NJ 07004
Contact name:
Lewis A Weiss
Phone: 973 276-5000 URL:
www.steelforge.com
AM&FG is an ISO9001:2000, AS9100(US Aerospace) and EN9100(European) open die and seamless rolled ring forger of Stainless, Nickel, Aluminum, Titanium, Super Alloys, Alloy Steel,Carbon Steel, Tool Steels,Copper . All mill forms and open die and seamless rolled rings forgings. (up to 216"" Dia)(weight 80,000 lbs All Power Manufacturing Co. Santa Fe Springs, CA 90670
Contact name:
Jeff Rindskopf
Phone: 562 802-2640 URL:
www.allpowermfg.com
All Power is the leading supplier of aerospace bushings, and manufactures a wide range of precision aerospace hardware for aircraft structures and engines. All Power is registered to ISO 9001:2000 (with AS 9100A) ALLEGHENY LUDLUM CORPORATION
Contact name:
Richard A. Duncan, Jr
Phone: URL: www.alleghenyludlum.com Allegheny Ludlum is a world leader in the production of flat-rolled titanium-based alloys, nickelbased alloys, premium specialty steels and stainless steels for the aerospace, chemical, petrochemical, power, envionmental, automotive and electronics industries. These alloys are available in a variety of product forms including plate, sheet, strip and foil to meet your unique production requirements.Because Allegheny Ludlum adheres to strict quality standards and process controls, our metal products offer propoerties, such as exceptional wear-resistance, corrosion- and heat-resistance, toughness and strength. Alliance Coatings Incorporated El Cajon, CA 92020
Contact name:
Bill McKune
Phone: 619 596-9191 URL:
www.alliancecoatings.com
Alliance Coatings Inc. (ACI) is a wholesale distributer of Sherwin Williams Aerospace primers and topcoats.ACI provides primers and topcoats in various MIL-SPECIFICATIONS.ACI also provides a patented 2-ounce two-component touch-up kit. Kits contain either primer/topcoat. This kit is unique to ACI.Orders are typically shipped within 2-days of receipt of order. Alliance Engineering Consultants, Inc. Santa Clara, CA 95054-3100
Contact name:
Kenneth S. Ngai
Phone: 408 970-9888 URL:
www.aec-engineers.com
Alliance Engineering Consulatnats, Inc. provides a broad range of electrical engineering services for projects in transportation, infrastructure, streetscape, parks, utilities, high tech, electronics, aerospace, biotechnology, pharmaceutica, and other technical related industries, as well as for educational, medical, detention, commercial and government facilities. Alliance Spacesystems Inc. Pasadena, CA 91103
Contact name:
Rene P. McClendon
Phone: 626 296-1373 URL:
www.asi-space.com
Alliance Spacesystems, Inc. provides mechanical systems engineering, robotics, structures, and mechanisms primarily for spacecraft and science instruments. Services include design, analysis, fabrication, assembly and test of these products for space and other demanding applications. Uniquely situated to provide a full range of services in the area of mechanical design and fabrication to the aerospace industry, ASI has the ability to provide complete end-to-end products from conception through integration and test. Key competencies of ASI personnel include mechanical and electromechanical engineering, design, analysis, machining, mechanical assembly, and test engineering. Current facilities include an engineering design center, a precision machine shop and QA facility, a mechanical assembly area including a class 10,000 clean room, and an environmental test area with thermal/vacuum capability to simulate the conditions of space. Allied Specialty Precision, Inc. Mishawaka, IN 46545
Contact name:
PAM RUBENSTEIN
Phone: 574 255-4718 URL:
www.aspi-nc.com
Allied Specialty Precision, Inc., (ASPI), is a manufacturing company entering its 52nd year in business. Founded in 1954, ASPI is a high precision manufacturing company serving the aircraft, aerospace and other related industries. We specialize in manufacturing gears, parts from castings and forgings, wire EDM, precision grinding, turning, milling, silver brazing, matched mechanical and silver brazed assemblies. We are ISO 9002/AS 9000 registered and Nadcap accredited per AS 7110 for welding. Alloy Machine & Tool Co., Inc. Lynbrook, NY 11563-2607
Contact name:
Paul R. Will
Phone: 516 593-3445 URL: AEROSPACE, ELFCTRONICS, MEDICAL, COMMERCIALJOB SHOPCNC MILLING & TURNING CENTERSQUALITY PRECISION MACHINING OFALL TYPES OF METALS, PLASTICS & CASTINGSDIP BRAZE PARTSCOMPLETE SUBASSEMBLIESSHORT / LONG RUN PRODUCTIONS3-D CAD. CAM SYSTEMCMM FOR INSPECTIONQUICK TURNAROUND TIME
Alphatech Systems, Inc Palm Bay, FL 32905
Contact name:
Jerry Phillips
Phone: 321 729-0419 URL:
None
Cable/wire harness assemblies, Power Distribution Panel and Communication Boxes Alta Precision Inc. MONTREAL, Qu H1J 2S1
Contact name:
GIOVANNI BEVILACQUA
Phone: 514 353-0919 URL:
www.altaprecision.com
Alta Precision focuses and specializes in large, complex parts for the aerospace industry - mainly landing gear components and gearboxes/engine components. Our strengths rely on experienced personnel who lead and train a young, motivated, highly skilled team. Being involved in projects producing parts for new aircrafts using innovative alloys has kept us on the forefront with inventive machining/manufacturing methods while adhering/respecting to strict aerospace specifications.Its clients include Messier Dowty, Heroux Devtek, Goodrich, CAE, Bombardier, USAF, & Kodak. AMERICAN AEROSPACE CONTROLS, INC. Farmingdale, NY 11735-1115
Contact name:
Greg D'Abramo
Phone: 631 694-5100 URL:
http://www.a-a-c.com
American AeroSpace Quality Corp. Pomona, CA 91766
Contact name:
Felicia Zequeira
Phone: 909 266-9692 URL:
www.aasqc.com
We offers a variety of CNC Manufacturing, Services. Providing premium service at a competitive cost is our main objective,and pride ourselves on a total commitment to our customers needs. American AeroSpace Quality, Corp Pomona, CA 91766
Contact name:
Arturo V Zequeira
Phone: 909 865-0883 URL:
www.aasqc.com
We offers a variety of 3 to Five Axis, CNC Manufacturing Services. Providing premium service at a competitive cost is our main objective,and pride ourselves on a total commitment to our customers needs. American AeroSpace Quality, Corp. Pomona, CA 91766
Contact name:
Art Zequeira
Phone: 909 865-0883 URL:
www.aasqc.com
Machine Shop cnc, precision cnc, combined with our highly skilled craftsmen you will not be disappointed. Quality is #1 in this Industry. American Connector Corp. Miami Lakes, FL 33014
Contact name:
Neal Bonavia
Phone: 305 591-7530 URL:
www.amccfl.com
American Connector has dedicated itself to serving the Military and Commercial Aerospace markets with professionalism, striving to deliver outstanding service, superior quality and the finest product available. We specialize in stocking mil-spec and commercial connectors, contacts, relays, circuit breakers, switches and accessories for the avionics and aerospace industry. AMERICAN CRANE & EQUIPMENT CORP Douglassville, PA 19518-1299
Contact name:
Karen Norheim
Phone: 610 385-6061 URL:
www.americancrane.com
Design and manufacture electric overhead cranes, wire rope hoists and specialized lifting systems; single girder, double girder and gantry cranes up to 200-ton capacity; wire rope hoists for monorail top-running and based mounted applications. Custom crane systems built to military specifications including aerospace and naval applications. Cranes and hoists are available for nuclear applications. Specialized equipment includes remotely operated grapples, automated cranes, transfer cards, lifting beams, etc. Full range of support services including installation, repair, modernizations, engineering studies and preventative maintenance. American Crane & Equipment Corporation Douglassville, PA 19518-1299
Contact name:
Karen Norheim
Phone: 610 385-6061 URL:
www.americancrane.com
Design & manufacture electric overhead cranes, wire rope hoists and specialized lifting systems; single girder, double girder and gantry cranes up to 200-ton capacity; wire rope hoists for monorail top-running & based mounted applications. Custom crane systems built to military
specifications including aerospace & naval applications. Cranes & hoists are available for nuclear applications. Specialized equipment includes remotely operated grapples, automated cranes, transfer cards, lifting beams. Full range of support services including installation, repair, modernizations, engineering studies & preventative maintenance. American GNC Corporation Simi Valley, CA 93065
Contact name:
Dr. Tasso Politopoulos
Phone: 805 582-0582 URL:
www.americangnc.com
American GNC Corporation specializes in applying advanced technologies to contemporary problems of critical importance within the Guidance, Navigation, Control and Communications (GNCC), transportation, aerospace and defense industries. Our product including: coremicro IMU, coremicro AHRS/INS, coremicro AHRS/INS/GPS Integration, coremicro AHRS/INS/DGPS Integration, coremicro Navigator and GPS/IMU REALTIME SIMULATOR.With Micro-ElectroMechanical-Systems (MEMS), the coremicro IMU provides angle increments, velocity increments, a time base (sync) in three axes and is capable of withstanding high vibration and accelerations. American Hofmann Corp. Lynchburg, VA 24506-0369
Contact name:
Stephen Norris
Phone: 434 5220300 URL:
http://www.hofmann-global.com
American Hofmann supplies the highest quality Balancing Machines for Automotive, Medical, Electro-Motor, Turbocharger, Digital Media, Gas Turbine, Aerospace and many other Industries.Portable balancing Machines and Analyzers.Our customers are Global supported by our network of agents and employees around the world.For 75 years Hofmann has provided precision balancing solutions whether for Manual, Semi or Fully Automatic production requirements. Our Contract Balancing Department can help you evaluate your balancing problems as well as providing a balancing service for you prototypes or complete production runoffs. American Industries Diversified, Inc. Phoenix, AZ 85040
Contact name:
Alan Vaughn
Phone: 602 243-3071 URL:
www.aid-az.com
AID is an applicator of Aerospace and Technical coatings that include, Mil-Spec paints, Dry Film Lubricants, Teflon's ( PTFE ), Halar, Kynar, Absite, and numerous powder coats. We process jobs from one piece to large orders. We are Nadcap certified and can quote or analize most coating requirements. American Magnetics, Inc. (AMI) Oak Ridge, TN 37831-2509
Contact name:
Aashish Chourey
Phone: 865 482-1056 URL:
www.americanmagnetics.com
Founded in 1968, American Magnetics (AMI) has grown to become a leading supplier of superconducting magnet solutions to meet almost any requirement. These include both traditional and cryogen-free magnet systems. Almost 50% of all systems produced by AMI are custom designed for demanding applications. AMI also offers a wide range of cryogen level instruments and associated autofill systems. Other products include magnet power supplies, cryo-mechanical assemblies and vapor cooled current leads. Please visit us at: www.americanmagnetics.com American Precision Hydraulics Huntington Beach, CA 92649
Contact name:
Steve Smith
Phone: 714 903-8610 URL:
www.americanprecisionassembly.com
AEROSPACE ASSEMBLYINSTALLATION OF BEARINGS, BUSHINGS, RIVETS, HARDWARE, COLD WORKING AND ALL PHASES OF AEROSPACE ASSEMBLY.HYDRAULIC PRESSURE TESTING American Protective Clothing U. S. A. Lorain, OH 44053
Contact name:
Bob Jordan
Phone: 440 960-2724 URL: APC designs and manufactures reusable Cleanroom Garments and Anti-Static Cleanroom Garments for Automotive Paintrooms,Electronics, Biomedical, Pharmaceutical, Aerospace, Food Processing, Nuclear Anti-C, Medical Device, etc. applications. Coveralls / Bunny Suits, Hoods, Face Masks, Frocks, Lab coats, Shoe Covers, Boots, etc are some of the Items in our Product Line. Please call us for all your Clothing needs. American R.C.S. Group Portland, IN 47371
Contact name:
JB Goodrich
Phone: 260 726-7818 URL:
www.americanrcsgroup.com
<font size=4>Commemorative Coins and Medallions<br><br> <u><font size=2>DESIGNED TO MEET YOUR UNIQUE NEEDS:</u><li>SALES -- Coins and medallions lend a classy, personal cachet to your gift shop or lobby.<li>SPECIAL EVENTS -- Celebrate significant milestones or events for your company, university or organization.<li>AWARDS -Honor employees, volunteers, donors and others for outstanding accomplishments. American Seal & Engineering Orange, CT 06477
Contact name:
Joe Kedves
Phone: 203 789-8819 URL:
www.ameriseal.com
American Seal & Engineering is a manufacturer of high performance seals and gaskets and sealing systems for critical and extreme environments. ASE Designs and manufactures products for use in the Aerospace, Oil & Gas, Chemical, Petrochemical, Nuclear and Automotive industries for over thirty years. AMETEK Aerospace & Defense Wilmington, MA 01887-2190
Contact name:
Laura Z Dion
Phone: 978 988-4639 URL:
www.ametekaerodefense.com
AMGLO KEMLITE_LABS INC Bensenville, IL 60106-1952
Contact name:
Grant Hyland
Phone: 630 350-9470 URL:
www.amglo.com
Manufacturer of specialty lamps since 1935.Aerospace, Airport Runaway/aircraft landing, obstruction/warning. AMS MATERIALS, LLC Jacksonville, FL 32223
Contact name:
Scott Shaffer
Phone: 904 262-7972 URL:
www.amsmaterials.com
AMS is a Woman owned manufacturer's representative headquartered in Jacksonville, Florida. Operations were first started in 1999 and incorporated as AMS Materials, LLC in 2000. It is a representative firm to the Electronics, CEM, Aerospace, Military, Fiber Optics and Chemical industries in the Southeast and Southwest USA. AMS specializes in specialty chemicals, materials and the unit operations to use them effectively . PFPE/PFPAE Lubricants- paste, liquids, dispersion; Cleaning Solvents- lead free and circuit board cleaners, LOX/GOX, HFE solvents; Equipment such as vapor phase soldering machines, vapor degreasers, aqueous cleaners, automated cleanliness test stations; EMI/RFI- board level filters, custom cabling systems, custom filters (our specialty); Fluids and Oligomers- 3M Performance Fluids, custom halogenated research chemicals.AMS Materials, LLC is a woman owned business concern. EIN 59-3662047, CAGE Code 1U0V0, NAICS 325199 ANALATOM INCORPORATED Sunnyvale, CA 94089
Contact name:
Bernard C. Laskowski
Phone: 408 734-9392 URL:
www.analatom.com
Analatom Incorporated is an independent research facility conducting research into structural health, integrity and security monitoring systems. In 1997, Analatom decided to become a product-oriented company that buys and develops technology. The principals became interested in the field of Micro-Electrical-Mechanical-Systems (MEMS). Analatom has licensed base line technology for chemical MEMS sensors for the purpose of commercially developing “smart sensors”. The licensor is with the Australian Defense Department Science and Technology Organisation (DSTO), which is one of the world-leading laboratories in detecting, repairing and preventing corrosion.The specific baseline technologies licensed from DSTO are the Adhesive Bond Degradation Sensors (ABDS), corrosion Linear Polarization Resistance (LPR) sensor and a Silicon MEMS Strain Gauge. Under the US Department of Defense (DoD) SBIR Phase I and Phase II programs Analatom redesigned these devices making them feasible to fabricate, and the company has produced prototypes and developed an easy to use monitoring and data harvesting system. Field-testing validated the operation of the sensor systems. These MEMS sensor systems have been patented. Trademark names include “Smart Tape Sensor System” and “Thin Sensor”. Analytical Graphics, Inc. Exton, PA 19341-2380
Contact name:
Stefanie Claypoole
Phone: 610 9818167 URL:
www.agi.com
Analytical Graphics, Inc. (AGI) develops commercial off-the-shelf (COTS) analysis software for land, sea, air, and space that is relied upon by the national security and space communities in more than 32,000 worldwide installations. In addition to the STK product suite, AGI produces the desktop software applications Navigation Tool Kit and Orbit Determination Tool Kit; interactive visualization AGI Viewer software; and the development tools 4DX and Real-Time Tracking Technology (RT3). For more information about AGI or its commercially available software technologies, e-mail info@agi.com or explore www.agi.com. Analyticon Corporation Rancho Palos Verdes, CA 90275-6313
Contact name:
J M Wagner
Phone: 310 519-1964 URL: Analyticon Corporation is a small woman and Hispanic operated S corporation that focuses on analytically oriented system engineering endeavors such as algorithm / simulation synthesis and mission design and performance analyses. Its expertise and innovations are primarily in two important aerospace fields - the guidance, navigation & modern control of vehicles such as missiles, satellites and spacecraft - and the remote sensing / surveillance / tracking / identification of hostile missile threats viewed primarily from infrared satellite posts. Other fields of Analyticon expertise are pattern recognition (particularly numeric processing facet), sensor / data fusion inroads (~ RF and acoustic / seismic), key infrared phenomenology, and boost phase intercept by SBIs or novel GBIs. Andec Mfg. Ltd. Toronto, On M9W 4Y9
Contact name:
Richard deWalle
Phone: 416 213-8000 URL:
www.andec.ca
Eddy Currrent and Ultrasonic Systems and sensors,Nondetructive testing equipment, NDE, NDT,Automated inspection of aerospace , automotive, bar, tube, rod, sheet, concrete, parts. Andrews Space, Inc. Seattle, WA 98104
Contact name:
Kim Huyber
Phone: 206 342-9934 URL:
www.andrews-space.com
Aerospace Engineering Firm, Research & Development Anitech Inc Las Vegas, NV 89117
Contact name:
Ed Smith
Phone: 702 696-1600 URL:
www.anitech.net
Anitech provides management consulting, training and software for manufacturing companies, specializing in lean manufacturing and value stream mapping software. Anixter Pentacon Inc. GRAND PRAIRIE, TX 75052
Contact name:
Brandy Ratliff
Phone: 972 660-5691 URL:
Answer Precision Tool Inc. Kitchener, On N2G 3W5
Contact name:
Dave Henning
Phone: 519 748-0079 URL:
www.answerprecision.com
Answer Precision Tool is a Manufacturing Technology Center which specializes in low to medium size production runs. APT can provide both 3 and 5 axis high speed machining. Our CAD/CAM department can generate or provide aid in generating and/or modifying part geometry. Turn-key assembly cells to inspect,hold,rivet,form,weld,glue,screw parts together can be provided. We will provide a design and build solution. The quality department through the use of Co-ordinate Measuring Machines can provide inspection/validation of parts and reverse engineering. AP Labs, Inc San Diego, CA 92127-1714
Contact name:
Justine Johnson
Phone: 858 674-2850 URL:
www.aplabs.com
Suppliers of the most versatile line of standard & custom rugged enclosures available. Convection or Conduction-cooled, rack-mount or ATR form factor,shock-isolated or hard-mount, whatever level of systems integration, AP Labscan supply a single chassis up to a fully cabled complete rack or turn-key system. In addition, AP Labs provide VME-based systems for data acquisition,PCM telemetry, & Avionics and have developed a digital video recording &replay system capable of acquiring real-time high resolution RGB, NTSC/PAL, and audio data. APEX MILLS CORP Inwood, NY 11096-2010
Contact name:
Pamela Siegel
Phone: 516 371-7685 URL:
www.apexmills.com
Apex Mills is a textile developer that specializes in designing and manufacturing synthetic knit fabrics to meet the specific needs of customers. Apollo Design Services, Inc Salem, NH 03079
Contact name:
Gayle A. Williams
Phone: 800 878-2556 URL:
www.apollodesign.com
Apollo Design Services provides solutions for all your personnel needs in virtually all classifications of employment. We are industry specific recruiters, adaptable to your industry. Some of the major industries we have served include: Aircraft and Aerospace * Architectural and Engineering * Automotive *High Technology *Construction * Electronics * Energy * Government and Defense * Marine * Nuclear * Petrochemical * Pharmaceutical * Telecommunications * Transportation Apollo Tool & Die, Inc. Rochester, NY 14615
Contact name:
Chuck Day
Phone: 585 254-2422 URL: Apollo Tool & Die, Inc. was established in 1979 and is a Woman Owned Minority Business. Apolloâ&#x20AC;&#x2122;s diverse manufacturing and total project capabilities make Apollo the logical choice as a one stop source for CNC & Conventional Machining, Water Jet and Laser machining, Precision Sheet Metal Fabrication, EDM, Tooling & Stamping and Engineering support. Apollo serves Aerospace, Automotive, Business Products, Health/Medical, Optical/Imaging and the Semi Conductor industries from proto types, low, mid and high volumes to accommodate your manufacturing requirements. APS Materials, Inc., CerAnode Division Dayton, OH 45405-2364
Contact name:
Lisa Smith
Phone: 937 278-6547 URL:
www.apsmaterials.com
Thermal Spray Coatings by APS Materials, Inc. (APS). Founded in 1975 by four engineers with strong backgrounds in material science, their goal was to provide a complete resource for Thermal Spray (TS) technology to the thermal spray coating industry. Today, APS is experiencing rapid growth as a client based provider of innovative thermal spray solutions for a wide range of needs in surface modification. The versatility of our staff and processes is reflected in the diverse clientele and industries we serve, including aerospace, materials processing, biomedical, automotive, and electronics. Thermal spray coatings by APS are simply the superior choice.CerAnode"" Division of APS Materials, Inc. Founded in 1984 as result of an exclusive Technology Transfer from the Army Corps of Engineers under the Davis Bacon Act, CerAnode Technologies International manufactures a full line of Mixed Metal Oxide (MMO) Impressed Current Anodes for most every application within the Cathodic Protection (CP) Industry along with Transformer Rectifiers (TR s) featuring Integrated Remote Monitoring & Control from the Remote Test Post to the SCADA Control Room Console. In addition, CerAnode manufactures Reference Electrodes, Coupon Reference Probes and other corrosion sensor technology. These products are used to measure and mitigate the corrosion of pipelines, AST bottoms, ships, locks and most any other underground or underwater metal structure. Archangel Systems, Inc. Auburn, AL 36832
Contact name:
Michael E. Greene
Phone: 334 826-8008 URL:
http://www.archangel.com
Archangel Systems, Inc. specializes in the development of inertial measurement systems, inertial sensors, attitude heading reference sytems, roll-over sensors, and other aerospace/automotive related equipment. Archer Rubber Co. Milford, MA 01757-3458
Contact name:
Bruce Calechman
Phone: 508 473-1870 URL:
www.archerrubber.com
We are a leading supplier of high quality elastomeric coated fabrics in military, industrial, and commercial markets, using all types of rubber polymers including, Neoprene, Nitrile,SBR, Butyl, Hypalon, Fluorocarbons, Epichlorohydrin, and Natural RubberWith 120,000 sq. ft. of manufacturing space and various types of coating and laminating capabilities, we have the capacity and versatility to solution or calendar coat fabrics effectively and deliver on time.A stateof-the-art thermal oxiation system, exceeding EPA requirements, allows the use of solvent based coatings that give us more flexibility in processing various polymers and blends to obtain the desired viscosities.A variety of curing processes are utilized to meet customer requirements. When requested, uncured materials are supplied in a range of finishes and interleafs.Quality control systems are currently in place that conform to military and aerospace standards MIL-I45208A and D1-9000, with continuing improvements and changes towards ISO9000 standards for future certification.
Armacel Armor Corporation Camarillo, CA 93012-8756
Contact name:
Asia Fernandez
Phone: 805 482-0016 URL:
www.armacelarmorcorp.com
Armacel Armor produces body armor including light weight ESAPI and SAPI solutions. Other solutions include vehicle and aircraft armor. Armacel Armorâ&#x20AC;&#x2122;s primary customer is the Department of Defense. Additionally, we are in development of various materials including polyethylene, aramid and graphite composites for industrial and aerospace applications. ARRAY AEROSPACE Doral, FL 33172-1365
Contact name:
Josephine Hernandez
Phone: 7862299481 URL:
Array Aerospace, Inc, Doral, FL 33172-2224
Contact name:
Josephine Hernandez
Phone: 786 331-7029 URL:
www.arrayaerospace.com
Repair and Overhaul of Wheel speed transducers and various electrical accessories. Arrow Diversified Tooling, Inc. Ellington, CT 06029
Contact name:
Janis Ekeberg
Phone: 860 872-9072 URL:
www.arrowdiversified.com
Manufacturer of Tools and Dies; Fixturing; Jigs; Gages; Prototype and Production Parts; Sheetmetal; Non-Metallic (Wood, Plastics, Epoxies, Urethanes); CNC 3-D Machining; Blanking; Forming; Molds; Patterns - Machined and Cast; CMMInspection capabilites; Tooling Services for All Industries - Precision, Aerospace, Automotive and Commercial. Arrow Diversified Tooling, Inc. Ellington, CT 06029
Contact name:
David Trench
Phone: 860 872-9072 URL:
www.arrowdiversified.com
Aryan Aerospace Fasteners Nashik, Ma 422010
Contact name:
Naresh Chadha
Phone: 00 91 2535603310 URL:
www.aircraftspaces.com
Manufacturers of Fasteners, Machined component, Jigs, Dies & Fixtures, Sheetmetal Components for the Aeronautical & Defence Industry. asa case corona, CA 92880-7444
Contact name:
craig seitz
Phone: 909 738-8222 URL:
www.asacase.com
asa is a manufaturer of high quality reusable shipping casesused in all facets of industry for transport and protectionof equipment ie. computers, video, audio, military, medical, aerospace, sports. our cases meet and exceed all ATA and MIL specs required sold under the tm Reasonable Rax and True Composite Cases which are the only real composite cases in the industry built from high quality carbon fiber or kevlar panels ultra lightweight for ease of handling ASAP Corporation MARYSVILLE, WA 98271-8914
Contact name:
BRIAN BERG
Phone: 360 657-0127 URL: Provide a full spectrum of engineering and mfr services for the aviation industry.Engineering services include design,stress substantiation, finite element modeling, fatigue and damage tolerance, FAA certification on commercial aircraft.Manufacturing services include fabrication of sheet metal, machined and composite parts. prototyping, parts assembly etc. ASAP is a FAA PMA holder. ASC Process Systems Sylmar, CA 91342
Contact name:
Loyd Champion
Phone: 818 349-4272 URL:
www.aschome.com
Manufacturer of specialized process equipment, control systems, and custom manufacturing software used in the composites, plastics, coatings and finishing industries. We also retrofit, service and maintain process equipment and controls. Ashland Electric Products, Inc. Rochester, NH 03867-4296
Contact name:
Chip Gehres
Phone: 603 335-1100 URL:
www.ashlandelectric.com
Ashland designs and manufactures high performance-high reliability electric motors, fans and blowers for defense, aerospace, transportation and medical applications. ASM Aerospace Specification Metals, Inc. Pompano Beach, FL 33069
Contact name:
Doug Bridges
Phone: 954 977-0666 URL:
www.AerospaceMetals.com
Distributors of aerospace grades of superalloys, titanium, high-temperature alloys, nickel and cobalt based alloys, aluminum, stainless and alloy steels and other exotic alloys in sheet, plate, bar, rod, tubing, coil, extrusions, forgings, castings, billet, and other shapes. Aspen Precision Technologies Inc. Petaluma, CA 94954
Contact name:
Richard F. Hunt Sr.
Phone: 707 778-6422 URL:
http://www.aspenprecision.com
Aspen Precision Technologies is an ISO 9002 Certified precision machining manufacturer of components for the Aerospace, Analytical Instrumentation, Medical, Semiconductor, and Optical industries. Aspen has 30 CNC machining centers (horizontal/vertical milling, large/small turning and Swiss screw turning) with prototype & tooling capabilities, precision microcircuit deburr and ""Turnkey"" mechanical/electrical assembly capability. We utilize MasterCam 3D software and offer electronic data exchange for IGES & DXF software files.Aspen has a state-of-the-art metrology lab with a Zeiss Contura CNC CMM. Our integrated Statistical Process Control Techniques include a three-step fully documented inspection process allows you to forego incoming inspection at your facility. Associated Aerospace Activities Inc SAN LEANDRO, CA 94577-3194
Contact name:
D.E. JOHNSON
Phone: 510 483-9020 URL:
Associated Machine Technology Brea, CA 92821
Contact name:
Mike Ralls
Phone: 714 996-8178 URL:
www.associatedtech.com
Associates Aerospace Activities San Leandro, CA 94577
Contact name:
Rebecca MacDougall
Phone: 510 483-9020 URL:
www.aaai.com
Manufacture exhaust nozzle parts for military aircraft AST Acme Coatings & Linings, Inc. Louisville, KY 40210
Contact name:
Wayne Cundiff
Phone: 502 583-8355 URL:
www.Tanklining.com
AST/Acme Coatings & Linings is a specialty applicator of custom coatings and sheet linings for protection against corrosion and abrasion. These coatings or linings can be applied in our shop and in the field. Typical applications include process and storage tanks, fans, heat exchangers, concrete (secondary containment), material handling racks/fixtures and other types of industrial equipment. Powder coatings (including fluoropolymers), plural component polyurethanes and polyureas, epoxies, phenolics, etc. Tank linings include coatings, baked coatings, and rubber and fluoropolymer sheet linings. AST/Acme possesses over 100 years of service to the corrosion protection industry. We offer time proven materials to fight corrosion and abrasion on all types of industrial equipment. We work with the latest developments in coatings and linings technologies. Astro Precision Machine, Inc. Salem, NH 03079-0491
Contact name:
Troy Hasty
Phone: 603 893-3700 URL:
astropmi.com
Twenty plus years experience producing high quality parts for asrospace,defense, high tech.,medical and other industries.In the Aerospace/Defense Industry we have a supplier code (No.879783) from Raytheon Company.We are actively machining components for New Hampshire Ball Bearings(aerospace bearings)and Diversified Optical (thermal imaging equipment).We are also in the process of securing a supplier code from BAE Systems formerly Lockheed Sanders.-- Facilities of 22,000 sq.ft.-- (Equipment List)HORIZONTAL MILLING - 2000 Toyoda FA400 w/RGV 12 pallet pool-1996 Tsugami FMA3 w/11 Pallet pool (VERTICAL MILLING)1998 Kitamura Mycenter 3 w/automatic pallet changer - 1998 Kitamura Mycenter 3x w/automatic pallet changer - 1995 Kitamura Mycenter 3x - (2)1998 kitamura Mycenter Zero w/automatic pallet changer - 1995 Excel 810 - (3)1994 Mori Seiki MV40M - 1994 Mori Seiki MV40B - 2001 Supermax (CNC LATHES) 1995 Mori Seiki CL-25 w/Tailstock - 1995 Mori Seiki CL-25 - 1995 Mori Seiki CL-15 - Plus A Mitutoyo CMM and much more support equipment.Astro Technology Inc. Meridian, ID 83642
Contact name:
Robi Foldesi
Phone: 208 888-3456 URL:
home.rmci.net/astrotech
For the past 35 years Astro Technology nc has built a reputation on handling specialized types of material & high quaility parts, which involves Aerospace, computer electronic components, and good customer relations. We are capable to handle close tolerance and complex components, short runs, & high-end production runs on our CNC turning and machining centers. Astro-Geo-Marine, Inc. Ventura, CA 93003
Contact name:
Thomas Fenole
Phone: 805 654-8300 URL:
www.astrogeomarine.com
Astro-Geo-Marine, Inc. (A.G.M.) is a reliable supplier of quality electronic and automatic test equipment for over 35 years. A.G.M. has extensive experience in designing & manufacturing (custom) as well as contract manufacturing. Our primary products are power supplies & systems, inverters, load banks, tone generators, controllers & regulators, and specialized electronic equipment. We serve aerospace (military & commercial) and industrial sectors. Electronic power conversion solutions for air, land and sea! Astronautics Corporation of America Milwaukee, WI 53209
Contact name:
Daniel R. Wade
Phone: 414 449-4242 URL:
www.astronautics.com
Astronautics is a world leader in the design, development, and manufacture of military and commercial electronics. Its products are used throughout the world in a wide range of military and commercial applications for ground, sea, and aerospace. More than 100,000 aircraft use Astronautics flight instruments, displays, computers, and components.Astronautics products are used in numerous air, sea, ground, and missile and space applications. Astronautics major product lines include Electronic Flight Instrument System, Electronic flight bag, Engine Indicating and Crew Alerting System, Network Server Systems, Multifunction Displays, Mission and display processors and systems, Flight director, Flight control system, Inertial guidance system, Air data computer, Integrated Network Server Unit and Auto pilot.Astronautics also provide complete systems for aircrafts across the world. ATI Wah Chang ALBANY, OR 97321
Contact name:
Katherine Toews
Phone: 541 917-6785 URL:
www.alleghenytechnologies.com/wahchang
We are one of the world's largest manufacturers of specialty metals and chemicals, used in energy production, chemical and mineral processing, defense, aerospace, medical, research and consumer products. Wah Chang materials include hafnium, niobium, titanium, vanadium, zirconium, silicon tetrachloride, and zirconium and hafnium chemicals. Aurora Casting & Engineering, Inc
Santa Paula, CA 93060
Contact name:
John Penrose
Phone: 805 933-2761 URL: Investment Casting FoundrySpecializing in small to medium size castingsAluminum, Steel, BronzeStereolithography, Rapid Prototyping CapabilityApproved to AS 9100Approved by all major prime contractors Automated Coatings, Inc. Edgewood, MD 21040
Contact name:
Michael Waskey
Phone: 410 671-7383 URL:
automatedcoatings.com
Automated Coatings, Inc. provides plating and painting services for military, aerospace, industrial and commercial applications. We are a Woman Owned Small Businessand are approved by NADCAP and most defense contractors. Automated Precision, Inc. Rockville, MD 20850-3981
Contact name:
Melissa Young
Phone: 301 330-8100 URL:
www.apisensor.com
Automated Precision Inc. is a world leader of advanced metrology solutions for industry. Founded by Dr. Kam Lau in 1987, API has pioneered progressively higher standards of accuracy for coordinate measuring and machine tool operation. Headquartered in North America, API has offices throughout South America, the Netherlands, Germany, China, Japan, Mexico and India as well as itâ&#x20AC;&#x2122;s extensive network of partnerships with recognized industry representatives throughout the world to insure that all customers have quality local support.API products are installed and used by all of the world's leading automotive, aerospace, machine tool, and CMM manufacturers. API's experienced engineering team is unmatched in its ability to create advanced innovative products, which meet the needs of rapid evolving industrial technologies. API is an active member of, and a key technology partner in several federal and industry sponsored programs for the advancement of various manufacturing scenarios. Automation for Industry (High Point Tool Co., Inc. Fairfield, NJ 07004
Contact name:
Gordon C. Eckley
Phone: 973 227-2570 URL:
www.afi47.com
We are problem solvers. We are a veteran owned small business that conceptualizes, designs & builds special machinery for production and/or testing in all industries. We have worked for aerospace, automotive, medical and personal product manufacturers. We have designed & built military product test rigs for Lockheed Martin.
Autometrix Precision Cutting Systems Grass Valley, CA 95945-8418
Contact name:
Abe Myers
Phone: 530 477-5065 URL:
http://www.autometrix.com
Autometrix develops 2D CAD software and builds single and low-ply cutting systems for anybody needing to design patterns and then cut them out accurately, and quickly. Our equipment is ideal for fabric, leather, and composite materials. With our worldwide experience, Autometrix offers the tools necessary for perfect pattern design, as well as fast, accurate, and reliable cutting. Our intuitive PatternSmith? software allows full CAD file creation, and is also compatible with many other common CAD files. Autotest Company San Antonio, TX 78219
Contact name:
Michael McGregor
Phone: 210 661-8661 URL:
www.autotest.com
Manufacturer of Automated test equipment for power suplies, UPS, and fuel cells. Main industries are Military, Medical, Military contractors, Industrial and OEM of power industry. Avchem, Inc. Saint Charles, MO 63301
Contact name:
Meghan Schrumpf
Phone: 636 946-4500 URL:
www.avchem.com
Avchem provides total Chemical Management Services (CMS) to the aerospace industry. We offer tailored business process solutions that will significantly reduce your total cost of ownership of aerospace chemicals. As a Boeing spin-out company, Avchem possesses special aerospace chemical domain knowledge and expertise, proven HAZMAT JIT/POU processes, and the latest chemical material tracking software and Web-enabled tools for the lowest cost of operation. AVERITECH INC. Englewood, CO 80112
Contact name:
BEN CONTRERAS
Phone: 303 925-0458 URL:
www.averitech.com
Averitech is a high technology small 8(a) business specializing in system engineering, project management, and electro-optical systems. Our personnel have extensive experience in the aerospace industry and support several large prime contractors in syste m analysis and concept design of electro-optical systems. Averitech also supports government organizations in evaluation of electro-optical concepts, system operations and program optimization.
AVIATION METALS OF NC Charlotte, NC 28269-2600
Contact name:
MIKE CONTES
Phone: 800 776-7075 URL:
www.aviationmetals.net
DISTRIBUTOR OF AEROSPACE QUALITY METALS & MATERIALS INCLUDING ALLOYS OF ALUMINUM, ALLOY & STAINLESS STEEL, TITANIUM, TUNGSTEN, COPPER, BRASS, AND NICKEL TO NAME A FEW. THESE ALLOYS ARE AVAILABLE IN SHEET, PLATE, STRIP, BAR, TUBING, CASTINGS, FORGINGS, EXTRUSIONS, AND ROLL FORMS.VALUE ADDED SERVICES INCLUDE CUTTING TO SIZE, HEAT TREATING, GUN DRILLING, TREPANNING, ANODIZING, CHEM-MILLING, GRINDING, MATERIAL TESTING, EXPORT/CUSTOMIZED PACKAGING, AOG/SAME DAY SHIPPING, AND PVC PROTECTIVE TAPE COATING.ISO9001:2000 & AS9100 QUALITY CERTIFIEDWWW.AVIATIONMETALS.NET Aviation Safety Facilitators Corp Elmont, NY 11003
Contact name:
Kenneth Susko
Phone: 516 352-4879 URL:
NA
Application of Fiber Optics, Miniture Spectrometers, Optical Sensors,Endospore Detection for Aviation and Aerospace vehicles. Such as measuring Oxygen in Fuel Tank Ullage, Cabin Enviroment as well as transportation and storage of Hazardous Materials Land and Shipboard method. Research and developement for new applications AVIOR INTEGRATED PRODUCTS INC LAVAL, Qu H7L3W3
Contact name:
JOE MARCHESCHI
Phone: 450 6296200 URL:
www.avior.ca
Avior Integrated Products is an integrator for the aerospace and military industry. Competencies include; Design, development and fabrication of Sheet Metal, Machined, Composite and Plastic parts or assemblies. Products are used on aircraft, missile launch systems, or vehicule structural components. Components include; flight control surfaces; (rudder, elevator, flaps, ailerons), fuselage (ribs, access panels, brackets), interiors (sidewalls, cockpit panels, glaresheilds), transparencies or glazings (wingtip navigational light lens). Avitek Aerospace Industries, Inc. OAK CREEK, WI 53154-2107
Contact name:
Jay Schwane
Phone: 414 764-8865 URL:
www.avitek-aero.com
Avitek Aerospace Industries Inc. is a supplier of commercial and military components, mainly applying to C130, C12, P3, F4, F16, and F22 aircraft. We can fill your AOG and Just in Time
requests, in addition to rotable parts exchange sales. Our repair station, FAA CRS# AHKR270X, is a clean, modern 12,000 square-foot facility specializing in the overhaul, repair and testing of commercial and military aircraft red-oil (MIL H-5606 fluid) hydraulic components and accessories. Avlite Aviation Inc Paso Robles, CA 93446
Contact name:
Tom Leatherwood
Phone: 805 239-4037 URL:
avliteaviation.com
Small business specializing in Grimes Aerospace lighting fixtures and components. Av-Tech Industries, Inc. Arlington, TX 76005-5066
Contact name:
Allen A. Avery, Sr.
Phone: 817 640-4031 URL:
www.thomasregional.com/nto/av-tech
Distributor of Aerospace, military & commercial Fasteners, Electronic Components & Misc. Aircraft Parts. AVTRON AEROSPACEINC. Independence, OH 44131
Contact name:
YUEGANG ZHAO
Phone: 216 642-1230 URL:
http://www.avtron.com
Avtron is a designer and manufacturer of test equipment for aircraft components. Avtron manufactures test systems for electrical generator system components, electrical control panels, hydraulic components and fuel system components. Avtron is ISO 9001 certified and holds several national stock numbers for aircraft test systems. Axiomatic Technologies Corp. Mississauga, On L4Z 1Z8
Contact name:
Ron Dimitrescu
Phone: 905 602-9270 URL:
www.axiomatic.com
Axiomatic is an ISO 9001:2000 based company and experienced supplier of rugged controls for demanding applications such as telecommunication, off highway, automotive, military and aerospace. aztex, inc. Waltham, MA 02451
Contact name:
ALAN A. MILLER
Phone: 781 622-5528 URL:
www.aztex-z-fiber.com
Manufacturer of Composite Aerospace Parts B & H Incorporated Auburn, WA 98001-1705
Contact name:
Karla Webster
Phone: 253 939-3500 URL: Job Shop Machine Shop, Precision Machining, CNC Milling and Turing. Steel, Aluminum, Plastics. Aerospace, Commercial and Medical. B E I Kimco Magnetic Div. San Marcos, CA 92069
Contact name:
Katherine Aufdengarten
Phone: 760 510-2514 URL:
htt//.beikimco.com
BEI Kimco Magnetics Division manufactures Brushless DC Motors, Electronic Commutator Drives, and Linear and Rotary Voice Coil Actuators for use in medical, semiconductor processing, aerospace, instrumentation, military and industrial applications. Applications include medical equipment and instrumentation, test and measurement devices, analytic instruments, machine tools, office automation equipment, automated manufacturing and robotic systems. Fractional horsepower Brushless DC Motors are available to 950 oz. - in. peak torque ratings and to operating speeds of 10,000 RPM. Rotary and Linear Voice Coil Actuators available to peak torque (rotary) and force (linear) ratings of 1500 oz. - in. and 500 lbs. respectively B&B Socket Products, Inc. Placentia, CA 92870-6737
Contact name:
Angela Grandbois
Phone: 714 985-4361 URL:
www.bbsocket.com
We are a distributor of AN-MS-NAS-NA-MIL fasteners, commercial fasteners, metric fasteners, aerospace hardware and electronic hardware. Stocking DFARS 252.225-7014 Alt 1 Compliant Fasteners Stocking RoHS Compliant Fasteners. ISO 9001:2000 and AS9100:01 Certified.Small Business Certified. WBE (Woman Business Enterprise Certified. B/E Aerospace - (ALSON MFG) COMPTON, CA 90220-5449
Contact name:
Harold Garcie
Phone: 310 639-9322 URL: 5 Axis Laser Positioned Gantry Milling of complex aircraft skins, webs, bulkheads and other structual components. Core competency includes contour forming of aluminum.Government
Cage Code is 56127 B/E Aerospace, Consumables Management Miami, FL 33172
Contact name:
Karen Cantor
Phone: 305 925-2638 URL:
www.beconsumables.com
Stocking distributor of AN-MS-NAS-BAC-Airbus hardware, including CherryMax, HuckMax rivets, solid rivets, clamps, hi-loks, nuts, engine nuts, bolts, fittings, screws, and washers. ISO 9001:2000, AS/EN 9120, Nadcap Level C, FAA AC-00-56, and MIL-I-45208. Baas Mabel Inc. SIMI VALLEY, CA 93063-3380
Contact name:
Bob Ruble
Phone: 805 520-8075 URL:
www.royalcoatings.com
Prototype and production quantities are welcome. Liquid painted items can be almost any size and powder coated components can be up to 22 feet. We can coat most metals, plastic and some wood. We have a new conveyor automated coating system with iron phospate wash and distilled water rinse including and in-line oven with coating booth. Have separate enclosed booths for MilSpec applications. We silk screen, fill and surface parts in-house. BAE Systems Technical Services Fort Walton Beach, FL 32548
Contact name:
Greg Schilling
Phone: 850 244-7729 URL:
www.ts-technicalservices.com
<b><i>BAE Systems</b></i> is an international company engaged in the development, delivery and support of advanced defence and aerospace systems in the air, on land, at sea and in space. The company designs, manufactures and supports military aircraft, surface ships, submarines, fighting vehicles, radar, avionics, communications, electronics and guided weapon systems. It is a pioneer in technology with a heritage stretching back hundreds of years. It is at the forefront of innovation, working to develop the next generation of intelligent defence systems.<br><b><i>BAE Systems</b></i> has major operations across five continents and customers in some 130 countries. The company has more than 90,000 people and generates annual sales of approximately ÂŁ12 billion through its wholly-owned and joint venture operations. Baere Aerospace Consulting, Inc. West Lafayette, IN 47906
Contact name:
Melanie Thom
Phone: 765 743-9812 URL:
www.baereaerospace.com
Baere Aerospace provides problem solutions involving fuels and lubricant systems. Services
include engineering design support, testing and interpretation, manufacturing support and field support. Barrios Technology Ltd. Houston, TX 77058-1556
Contact name:
Karen Saltsman
Phone: 281 280-1900 URL:
www.barrios.com
Barrios Technology provides engineering for space operations, information technology, and training solutions to government and the aerospace industry. Baublys Control Laser Orlando, FL 32837
Contact name:
Monica Correal
Phone: 407 926-3500 URL:
www.controllaser.com
Baublys Control Laser CorporationLeader in manufacturing fully integrated lasers and mechanical coding, marking, engraving, deep engraving, and 3D engraving systems and solution for the aerospace, automotive, coining & jewelry, consumer/commercial, electronic, medical, mold & die, packaging, tooling and trophy & awards industries. Our Laser Marking Systems are available: 10 Watt, 25 Watt, 50 Watt and CO2 with high power Nd:YAG & Nd:YLF lamp and diode pumped Infrared, Green, UV & Deep UV systems. Bauer, Inc. Bristol, CT 06010
Contact name:
Sharon Roys
Phone: 860 583-9100 URL:
http://www.bauerct.com
World wide manufacturer of Test and Support equipment for military and commercial aviation / aerospace industries BAX Global INC. Irvine, CA 92602
Contact name:
GENITA JEFFREY
Phone: 757 461-6398 URL:
WWW.BAX GLOBAL.com
BAX Global is a subsidiary of The Brink's Company. We are a $2.4 billion transportation and supply chain management company with over 12,000 employees worldwide. We have a worldwide network of 500 offices in 133 countries. Our global challenges involve constantly changing conditions and demands, widely dispersed geographic areas and worldwide development in affiliation with supply chains. We provide business solutions to the world s leading companies. BAX Global is one of the world's leading international freight transportation and supply chain management companies. BAX Global offers a full range of services called BAXSuite
products encompassing international air and sea freight forwarding multi-modal delivery options, and guaranteed and standard delivery throughout North America. Primary industries use BAX Global because of its comprehensive range of services include aerospace, automotive, hi-tech, health care and retail. BAX Global's flexible, value-added services differentiates it from others in the industry. Bechdon Co., Inc., The Upper Marlboro, MD 20774-8746
Contact name:
Michael Janes
Phone: 301 2490900 URL:
www.bechdon.com
Precision machined parts, fabrications, and assemblies for the Defense and Aerospace industries. Becker Machine & Tool, Inc. Princeton, MN 55371
Contact name:
Christine M. Gerth
Phone: 763 389-4093 URL:
www.beckermachinetool.com
Becker Machine & Tool, Inc. is a precision machining company catering to defense, aerospace, industrial controls, medical, electronics, special machines, heavy equipment, and other industries that demand high precision and quality. Belcan Corporation Cincinnati, OH 45242
Contact name:
Jamie Linenkugel
Phone: 513 891-0972 URL:
www.belcan.com
Belcan Corporation provides technical and temporary staffing, full-service engineering, design and build, application technology, software development and training, procurement, information technology, and multimedia services worldwide. Belle Aerospace Corporation Wheaton, IL 60187
Contact name:
JOHN J. BELLE
Phone: 630 430-1926 URL: Advance hardware development engineering services for aerospace flight systems using a combination of Computer Aid Engineering (CAE) and Computer Aid Design (CAD) tools. Beneke Wire Co. Louisville, KY 40214-3788
Contact name:
Michael Beneke
Phone: 502 367-6434 URL:
www.benekewire.com
An ISO 9001:2008 company that manufactures round and hex drawn aluminum wire and rod in coil and straight length form utilizing heat treatable and non-heat treatable aluminum alloys. Beneke offers special finishes that improve tooling, formability, and efficiencies. Cold heading, nuts, bolts, screws, solid, semi-tubular and tubular rivets, escomatic wire, screw machine stock, bar stock, fence, carabiners are just a few specialty fasteners and applications manufactured from their wire. Beneke serves the automotive, aerospace, marine, apparel, building and construction industries. BENTAL INDUSTRIES LTD. Merom Golan, Is 12436
Contact name:
Moti Nitzan
Phone: 972 528514290 URL: www.bental.co.il Bental Industries, a member of GevaSol group, is one of the industry?s leading suppliers of specialized motion systems for a wide range of military and civilian applications. Its solutions meet the needs of the most demanding industrial scenarios and the most rugged combat conditions. The company specializes in innovative motion technologies which include stabilized gimbal systems, brush and brushless motors, permanent magnet generators, electronic drivers and controllers, servo actuators and more. Berco Precision Valencia, CA 91355-4619
Contact name:
Richard Berberat
Phone: 661 295-5171 URL:
www.bercoprecision.com
Tool & Die Shop specializing in Jig Boring and Jig Grinding and custom fabrication of jigs, fixtures, gages, and prototypes. Bergen Cable Technology, LLC Fairfield, NJ 07004
Contact name:
Peter W. Bartholomew
Phone: 973 276-0605 URL:
www.bergencable.com
Manufacturer of Mechanical Wire Rope Cable Assemblies for the Aerospace, Marine, Medical, Military, Transportation, and General OEM markets. Also featuring Safety Cable, a threaded fastener retention system, which is an easy to install, low cost alternative to lockwire. Bergen Cable is a QPL supplier of Lockclad Cable Assemblies manufactured in accordance with MILDTL-87218. BERKSHIRE INDUSTRIES INC WESTFIELD, MA 01086-0828
Contact name:
Bill Golen
Phone: 4135688676 URL:
www.BerkshireIndustries.com
Precision machining of close tolerance and complex components for the aerospace industry. Berry Enterprises Inc - Precision Machining Roy, UT 84067-0243
Contact name:
KAY P BERRY
Phone: 801 825-8102 URL:
(none)
Precision Machining and Manufacturing of Government, Military, Aerospace, and Industrial Parts and Tooling. Reverse Engineering. Job Shop. Billingsley Magnetics Brookeville, MD 20833
Contact name:
Eva M. Billingsley
Phone: 301 774-7707 URL:
www.magnetometer.com
Research and Development, Manufacture of fluxgate magnetometers, gradiometers and magnetic field instrumentation for military and commercial customers in aerospace, geophysical and naval applications. Bill-Jay Machine Tool Corp. RONKONKOMA, NY 11779-6641
Contact name:
ROBERT MULLER
Phone: 631 467-2632 URL:
BILL-JAY.COM
Manufacturer of complex 4-5 axis components and sub assemblies for the aerospace industry. Both for rotorcraft and fixed wing aircraft. Bisco Industries, Inc Irving, TX 75062
Contact name:
Joy L. Almond
Phone: 972 554-4078 URL:
www.biscoind.com
Distributor of electronic components and hardware fasteners for the electronic, aerospace and fabrication industry. We have over 167 manufacturers that we can supply your electronic and hardware fastener requirements from. Call us for your hard to find items as well. Bisco Industries, Inc. Irving, TX 75062-4943
Contact name:
Joy L. Almond
Phone: 972 554-4078 URL:
www.biscoind.com
Distributor of electronic components and hardware fasteners for the electronic, aerospace and fabrication industries. We have over 160 companies that we can pull from to assist you in your electronic component and hardware fastener requirements. Bissinger & Stein, Inc. Kulpsville, PA 19443
Contact name:
C. F. Workman
Phone: 215 256-1122 URL:
http://www.steinseal.com
Since 1964 Bissinger & Stein has provided close tolerance, precision Aircraft Quality contract machining for numerous Aerospace Prime contractors. Parts machined by us have been used in the F22, JSF, A10, F4, F14, F16, F15, F18, and Space Shuttle programs. We also provide critical parts for the CH47 and CH46 programs. BiTMICRO Networks, Inc. Fremont, CA 94538
Contact name:
Percelia Narzoles
Phone: 510 743-3194 URL:
www.bitmicro.com
BiTMICRO Networks develops flash disk, solid state disk (SSD), network storage and file cache solid state storage solutions in 2.5"" and 3.5"" hard disk drive (HDD) footprint and 19"" rackmount configurations. <P> With more than 200 employees around the globe, BiTMICRO continues to drive SSD innovations with leading-edge solid state hard drive technologies. The E-Disk速 solid state disk drive and flash disk drive solutions are ideal for harsh, demanding, and mission-critical applications in the industrial, embedded, computer, communication, medical, military, and aerospace industries. <P> In addition, E-Disk速 flash disks offer unmatched performance, significantly reducing access times to stored information, acting as performance boosters for almost any enterprise application such as:<P> - ISP, ASP and E-Commerce Applications<BR>Financial and OLTP Applications<BR>- Portable Computing<BR>- Direct Attach Storage (DAS)<BR>- NAS and SAN<BR>- RAID Systems<BR> BKM RESOURCES, INC. GLOBAL CHEMICALS Eatontown, NJ 07724
Contact name:
RECHE KIRKLAND
Phone: 732 264-2300 URL:
www.bkmresources.com
Chemical Management Services and Chemical Distribution of specialty and commodity chemicals for laboratory and industrial use with warehousing capabilities nationally. BLACKSKY CORPORATION Carlsbad, CA 92008
Contact name:
Scott Bartel
Phone: 760 476-9482 URL:
blacksky.com
The blacksky Corporation provides cost effective solutions for small scale rocketry, aerospace systems and instrumentation. Successful blacksky activities inculde the: US Navy Affordable Weapon; NASA Dryden Aerospike Rocket Test; University of New Mexico Student Rocket Kits; flight video systems for the X-cup.The president of the blacksky Corporaion has over 30 years of experience in aerospace technology and participated in several highly successful NASA satellite programs and with the Strategic Defense Initiative Organization space missions. Consulting services are avialable for systems evaluation and technical assessment activities as well as the design and test of small scale systems. Blevins Screw Prod, Inc. Flint, MI 48503
Contact name:
Bruce Blevins
Phone: 810 7441820 URL: Manufacturer of screw machine type parts from bar stock in quantities from 1 to 100,000. Manufacture to print. Five inch diameter or smaller. Aircraft and aerospace is our specialty. Body Tech NW, Inc. Mukilteo, WA 98275
Contact name:
Monica Keating
Phone: 866 315-0640 URL:
www.bodytechnw.com
Body Tech NW was founded in 2000 by Laura Kaplan. Born of the desire to enhance the lives of physically challenged people with added comfort and mobility, the Body Tech NW line of seating and postioning products offer unparalleled innovation in design, material, engineering, function, durability and aesthetics. Our mission is to become a valued partner with rehabilitation technology specialists worldwide to assist their efforts of providing for and enhancing the lives of their customers.Our team of engineers have adapted extensive aerospace technology and experience into many of the innovations currently found in the Body Tech NW suite of positioning products available. Our product development team listens closely to our customers for product feedback, needs, and desires and acts as a liaison to our engineering team to make sure that needed, ""cutting-edge"" products and technology are brought to the market in a timely manner.The Body Tech NW team, many with medical and mufuacturers' bachground and experience, direct the path for making sure that the Body Tech NW brand name of superior positioning products is well-communicated within the rehabilitation industry. Boeing Co. (H Q), The Chicago, IL 60606
Contact name:
Sue Lorenz
Phone: 312 544-2936 URL:
http://www.boeing.com
The Boeing Company is the largest aerospace company in the world and the United States'
leading exporter. Total company revenues for 2001 were $58.2 billion. It is NASA's largest contractor and the largest manufacturer of commercial jetliners and military aircraft. The company's capabilities in aerospace also include rotorcraft,electronic and defense systems, missiles, rocket engines, launch vehicles, satellites, and advanced information and communication systems. The company has an extensive global reach with customers in 145 countries. Bolduc's Machine Works Inc. CHAPLIN, CT 06235
Contact name:
JOHN BOLDUC
Phone: 860 455-1232 URL: We make all types of assembly & disassembly tooling for the Aerospace Industry. We are currently vendor numbered for United Technologies,and Government work. We are a general Machine shop with capabilities for a large range of projects. We network with other shops for added capability. We do R&D, one of's, and production runs. A sampling of our tooling is as follows: electrical cables and electrical testing circuits, Hydraulic repairs,pumps and hydraulic assisted tooling, and our primary product, fully machined tools. WE are proud of our Quality and On-Time deliveries. We are qualified to work to mil-std 45208. Please call with your needs. Bortis Performance Machine Co. Anaheim, CA 92806
Contact name:
Vasile Bortis
Phone: 714 630-6648 URL: Full service machine shop specializing in high precision production work.Milling,turning,drilling,boring,and other cutting operations in common and exotic metals and plastics. Machining operations on aerospace materials are a specialty. Boyd Corp. Modesto, CA 95357
Contact name:
Jeff Pile
Phone: 209 2361111 URL:
http://www.boydcorp.com
Boyd Corporation is a custom fabricator of resilient materials for the electronic, transportation, medical, aerospace industries and the industrial OEM. We specialize in the manufacturing of component parts using flexible and semi-rigid materials and support your needs with local experienced technical sales personal to address your critical design and material specifications. Branford Wire Mountain Home, NC 28758-0677
Contact name:
THOMAS SIGLER
Phone: 828 692-5791 URL:
www.branfordwire.com
Mfg. of specialty stainless and nickel alloy wire, strand, thermal spray and welding wire. aerospace. inconel, monel. lockwire, Nickel & Stainless steel products. markets: medical, aerospace, nuclear, petrochemical, commercial etc. Branford Wire & Mfg. Co., Inc. Mountain Home, NC 28758
Contact name:
Tom Sigler
Phone: 828 692-5791 URL:
www.branfordwire.com
mfg. of nickel & stainless steel wire, weld wire, thermal spray, lock, strand, cable, gov't certified(3A860), spring temper to annealed, 0.002 Brannigan Solutions LLC Huntington Beach, CA 92646-2844
Contact name:
John Benz
Phone: 714 593-6420 URL:
www.brannigansolutions.com
Software and systems engineering company with experience in aerospace and defense industries. Brannigan has been supplying engineering contract and sub-contract support to leading aerospace companies in Southern CA since 1997.Have experience with military aircraft updgrade programs for both AF and NAVY programs as well as FAA programs.We have provided consulting services for CMM and CMMI efforts and have intimate working knowledge of software life cycle and systems development processes. We have developed software unit test strategies and programs for our customers that meet both MIL-STDs and FAA safety level B standards. We have expertise in providing software test and evaluation support for numerous projects and have uncovered various system anomalies resulting in ehanced system reliability.Brannigan is currently supporting Satellite flight control and payload software efforts for Boeing, El Segundo. We are also working with Rockwell Collins on the In-Flight Entertainment systems. BREAULT RESEARCH ORGANIZATION INC TUCSON, AZ 85715-3862
Contact name:
Michael Stevenson
Phone: 520 721-0500 URL:
www.breault.com
Breault Research Organization, Inc. (BRO) is a full-service optical engineering firm providing innovative solutions for the aerospace, automotive, biotechnology, consumer electronics, defense, medical, semiconductor, and telecommunications industries. Bren-Ko Patterns, Inc. Hamilton, OH 45015
Contact name:
RANDY JOHNSON
Phone: 513 874-7236 URL:
WE ARE ABLE TO RENDER YOUR PATTERN IN SEVERAL DIFFERNT MEDIAS TO INCLUDE, BUT NOT LIMITED TO WOOD ,FOAM, METAL, AND PLASTICS. OUR DIVERSE EXPERTISE RANGE FROM, MANDRELS FOR THE MANUFACTURING OF BRAIDED FABRICS FOR COMPOSITE REINFORCEMENT IN TECHNOLOGICAL APPLICATIONS TO PATTERNS FOR THE MACHINE TOOL INDUSTRY. WE ALSO PRODUCE PATTERNS FOR THE AUTOMOTIVE INDUSTRY AND AEROSPACE INDUSTRIES. WE ALSO OFFER PROTOTYPE PATTERNS, AND CASTINGS FOR MODELING. WE ARE CAPABLE OF BUILDING PATTERNS FROM EXISTING CASTINGS AND REFURBISHING OLD PATTERNS. Brewster Jr., Inc., William H. Fairfield, NJ 07004
Contact name:
SALVATORE T. FREDA
Phone: 973 227-1050 URL:
www.brewster-washers.com
MANUFACTURERS OF PRECISION ROUND WASHERS, SHIMS AND DISCS.SPECIALIZING IN SMALL SIZES AND STAINLESS STEEL.NOT LIMITED TO METALS, PLASTICS ARE AVAILABLE Brewster Jr., Inc., Wm. H. Fairfield, NJ 07004
Contact name:
Salvatore T. Freda, Jr.
Phone: 973 227-1050 URL:
www.brewster-washers.com
Since 1919, we have manufactured Precision Round Washers, Shims and Discs for the Aerospace, Defense, Optical, Computer, Chemical,Robotic Industries. Creating solutions for highly precise parts for the medical industry too.We specialize in small to miniature sizes and our vast stock of various Stainless Steels. But we are not limited to metals, Plastics are available in a wide variety of density's and colors. Brico Welding & Fabrication, Inc. Chesterfield, MI 48051
Contact name:
Brad Coons
Phone: 586 948-8881 URL:
www.bricowelding.com
Specialists in aluminum and stainless steel weldments.Fine plasma cutting of nonferrous and ferrous materials up to 1"" thick.Limited machining capabillities.Certified welders in AWS and missile and aerospace welding. Bridean Incorporated Yorktown Heights, NY 10598-6625
Contact name:
CLINT FARRELL
Phone: 631 226-0700 URL:
WWW.BRIDEAN.COM
Manufacturer of precision assemblies, parts and kits for aerospace OEMs and aftermarket. Specializing in Sikorsky, Northrop Grumman and Lockheed Martin aircraft. Broadwave Technologies, Inc Greenwood, IN 46143-1444
Contact name:
Joetta Trulock
Phone: 317 888-8316 URL:
www.broadwavetech.com
BroadWave Technologies is a leading manufacturer of RF & Microwave coaxial components including but not limited to terminations, attenuators and power dividers for the Aerospace, Automotive, Defense, Medical, Telecommunications, Test and Measurement markets. In addition to standard products BroadWave specializes in low cost custom components. BroadWave Technologies, Inc. Greenwood, IN 46143-1444
Contact name:
Michael Trulock
Phone: 317 888-8316 URL:
www.broadwavetechnologies.com
BroadWave Technologies, Inc. is a leading manufacturer of test accessories, terminations, attenuators and power dividers for the Aerospace, Automotive, Defense, Medical, Telecommunications, Test and Measurement markets. In addition to standard products BroadWave specializes in low cost custom components. Most devices are available with BNC, F, N, SMA, TNC or 7/16 DIN connectors. We encourage you to contact us with your unique requirements so we may propose a solution. Often we are able to provide a solution from our existing models. BRUSH RESEARCH MANUFACTURING CO INC Los Angeles, CA 90022-1288
Contact name:
Heather Fowlie
Phone: 323 261-2193 URL:
http://www.brushresearch.com
Since 1958, Brush Research Manufacturing has been a leader and manufacturer of premium quality custom and standard power brushes, twisted-in-wire brushes, and the BRM patented FlexHone速 Tool. Bryant-Lee Associates San Antonio, TX 78217
Contact name:
Daniel Benac
Phone: 210 657-1005 URL:
in work
The company provides materials engineering and test services specializing in aircraft structures, failure analysis, reverse engineering and materials characterization. We assist with mishap investigations. We have a dedicated labaroatory that characterizes steel, alumnum, titanium, and
superalloys. Bryce Aviation Inc. Bow, NH 03304
Contact name:
Mr. Sean L. Wray
Phone: 603 774-6686 URL:
www.bryceaviation.com
Specialty Aerospace parts and tooling manufacturer. Primarily providing security components to commercial air carriers worldwide. Brytam Manufacturing, Inc. Derby, KS 67037
Contact name:
Tammy Reed
Phone: 316 788-3300 URL:
www.brytammfg.com
Manufacturer of Aerospace Parts. We do CNC Machining, CNC Programming, Tool Design, Tool Fabrication, Quality and Process System, Rockwell Hardness Testing and Conductivity Testing. Brytam Mfg., Inc. Derby, KS 67037
Contact name:
Tammy Reed
Phone: 316 788-3300 URL:
www.brytammfg.com
SMALL WOMAN OWNED MACHINE SHOP. CURRENT MANUFACTURER OF AEROSPACE PARTS. CAN MACHINE TITANIUM, MAGNESIUM, ALUMINUM, STEEL & STAINLESS STEEL. HAVE ALSO MACHINED NYLON, NYLATRON, AND PHENOLIC. PRIMARY CUSTOMER IS RAYTHEON AIRCRAFT COMPANY AND CESSNA AIRCRAFT COMPANY. B-Side Plastics Pearland, 77584-2950
Contact name:
Barry Stiles
Phone: URL: www.b-sideplastics.com
BST Systems Plainfield, CT 06374
Contact name:
Zoe Adamedes
Phone: 860 564-4078 URL:
www.bstsys.com
Manufacturer of batteries,custom electronics and electrical cabling for military and aerospace
applications BTC Electronic Components Wake Forest, NC 27587
Contact name:
Mike Johnson
Phone: 919 556-8900 URL:
www.btcelectronics.com
BTC is a value-added, authorized/franchised distributor specializing in connectors, connector accessories, backshells and heat shrink products for military, aerospace, medical and industrial applications. Franchised for 27 lines. One hour response on RFQs. On-time delivery and outstanding quality. All value-added services plus tin dipping. ISO9001:2000, AS9100, MIL-790 certified. Burtree, Inc. Van Nuys, CA 91405
Contact name:
CYRUS MASSOUDI, M.E.
Phone: 818 786-4276 URL:
www.burtreeinc.com
Precision machining & mechanical assemblies serving the aerospace, defense & commercial industries. Quality system is approved to ISO-9002. Certified supplier of Northrop Grumman, & Raytheon Systems Co. Approved by US Dept. of Defense & registered on CCR, CAGE Code 4L564. Also approved by most major aerospace primes & commercial concerns. BuzzMac International LLC Glendale, WI 53209-3252
Contact name:
Paul A. Bosomworth
Phone: 414 352-5419 URL:
www.buzzmac.com
Company is based in Glendale, WI, USA. Specialize in developing nondestructive testing equipment and software for measuring the elastic and damping properties of materials. C & A tool engr. CHURUBUSCO, IN 46723-0094
Contact name:
Jack Green
Phone: 260 693-2167 URL:
www.catool.com
CNC, turing, milling, OD grinding, ID grinding, centerless grinding and EDM.Productions and prototypeMarkets, Aerospace, Medical, Fuel systems, C & M Machine Inc. Rogers, AR 72756-9237
Contact name:
ARCHIE COOPER
Phone: 479 631-2994 URL: Small women owned company providing machine shop services in the defense and aerospace industry. We provide milling and turning services on various types of metals including aluminum, stainless, other steels, titanium, inconel, copper, brass etc. We do long run production as well as prototypes. C & M Machine, Inc. Rogers, AR 72756
Contact name:
Archie Cooper
Phone: 479 631-2994 URL: small women owned machine shop doing work primarily in theaerospace and defense industry. N/C milling, conventional milling and turning. Short run and production. Materials include inconel, titanium, copper,aluminum, stainless and other steels. C and M Machine Inc. ROGERS, AR 72756-9237
Contact name:
ARCHIE COOPER
Phone: 479 631-2994 URL: Small women owned company providing machine shop services in the defense and aerospace industry. We provide milling and turning services on various types of metals including aluminum, stainless, other steels, titanium, inconel, copper, brass etc. We do long run production as well as prototypes. C E C Vibrations Products Inc. Covina, CA 91722
Contact name:
Richard Rogers
Phone: 626 938-0200 URL:
http://www.cecvp.com
CEC Vibration Products is a manufacturer of vibration sensors and condition monitoring equipment specialized for use in harsh environment applications. CEC provides a full line of selfgenerating velocity sensors, industrial accelerometers, digital switches, transmitters, signal conditioners, remote displays, cable assemblies and fully programmable vibration monitoring equipment (8000 CCATS) used in health monitoring and qualification testing. CEC has a fieldproven reputation for product reliability and support. This strong reputation is the paramount reason our worldwide aerospace, military, industrial and marine customers choose CEC products for their critical machinery health measurements. Trust CEC to bring quality to your field of operation. C N C Industries, Inc. Fairmont, WV 26554
Contact name:
Greg Morgan
Phone: 304 366-8262 URL:
www.cncindust.com
CNC Industries Inc. is a “job shop” manufacturing firm located in Fairmont, WV. Our customer base includes aerospace, medical, military, and numerous commercial and machinery industries. With our knowledge of commercial and exotic materials, years of machining experience, and our ability to handle numerous drawing formats via the Internet, our facilities can handle one-of-a-kind prototype pieces to long run production work. C R A Machine San Diego, CA 92117
Contact name:
Chris Arnold
Phone: 858 483-6390 URL: CRA PRECISION MACHINE IS A FULL SERVICES MANUFACHURINGFACILITIY.CNC MILLING AND CNC LATHE. PRECISION TURING ALL METAL AND ALUM. MATERIALS.AEROSPACE MANUFACTURING OF SPARE PARTSNAVY SPARE PARTS C T I Electronics Corp. Stratford, CT 06615-7314
Contact name:
Peter Mikan
Phone: 203 386-9779 URL:
http://www.ctielectronics.com
CTI Electronics has established an enviable reputation as the preferred supplier of HMI (Human Machine Interface) products to fields including aerospace, automation, food, marine, medical, military, pharmaceutical and transportation. These operator input devices include a complete family of industrial joysticks, industrial mouse pointers and industrial keyboards; all which are designed to be the most reliable and durable in that market place. Cage Code # 0K9X9. C&H Hydraulics NEWPORT BEACH, CA 92663-2806
Contact name:
JAMES F ANDREAE JR
Phone: 949 646-6230 URL:
CANDHHYDRAULICS.COM
BUSHING & BEARING INSTALLATION & STAKING. MANUFACTURER OF ELECTRONIC SWITCHES. MANUFACTURER OF HYDRAULIC AEROSPACE COMPONENTS CableTest Systems Inc. Markham, ON L3R 4C1
Contact name:
Raymond Simmons
Phone: 905 475-2607 URL:
www.cabletest.com
CableTest Systems Inc. provides total cable testing solutions to a wide array of industries including aerospace, computers, medical, telecommunications, transportation and the military. Customers rely on CableTest s high voltage interconnect equipment to test their cables, wiring harnesses, power cords, and backplanes with speed, accuracy and reliability. Cal Glass For Research, Inc. Costa Mesa, CA 92626
Contact name:
Robert Cheatley
Phone: 714 546-7250 URL:
http://www.cal-glass.com
Cal-Glass is a Pyrex and quartz scientific glassblowing company with over 40 years of experience. We service many fields including aerospace, semiconductors, chemical, petrochemical, and biotech, just to name a few. Cal-Glass is unique in the scientific glassblowing industry primarily owing to the chemical engineering expertise we possess. We can design, engineer, modify, and manufacture from the ground up. Cal-Glass builds from bench scale to pilot plant systems. We have built chemical production distillation systems for many international companies. Our Eco Stills速 partner designs environmental recovery apparatus for water-based and organic-based solvents. CAL Precision, Inc. Riverside, CA 92503
Contact name:
Mike Loper
Phone: 951 343-9379 URL:
www.calprecision.com
Our facility is located in Riverside, California where we have done business for the past 6 years. We have over 25 years experience in the Aerospace industry and our looking forward to doing business with you. During this time we have also been involved in Mold & Die, Automotive, Semiconductor, and the Medical Industries.<br><br>We pride ourselves with the knowledge that we will manufacture the parts that most shops do not like to take on. Our estimating department encourages you to send over your most difficult prints for quote.<br><br>We look forward to serving you with long or short run and/or prototype work. We offer quality work, quick turn around, and personalized attention to all of our customers. We believe in the principle of integrity and honesty in the work place, and we feel that we can offer you a shop that not only will meet your expectations, but to exceed them.<br><br>We also offer contract programming and solid model construction, which can easily be exported, to our customers either in IGS, DXF or Parasolid files. Calco Aerospace Fort Worth, TX 76115
Contact name:
CHARLES GRALAPP
Phone: 817 921-2558 URL:
www.calcoaero.com
Small woman-owned hardware and fastener ditributorAS9100A certified CALIFORNIA METAL & SUPPLY INC. Santa Fe Springs, CA 90670-8232
Contact name:
Kenneth Minkyu Lee
Phone: 310 515-1166 URL:
www.CaliforniaMetal.com
Aerospace Aluminum, Stainless, Alloy Steel, Titanium, Pipe, Tubing, Valve, Fittings, Hardware and Chemical SpecialistBuy everything from one source: Save time, paperwork and money. Calmont Wire and Cable Santa Ana, CA 92707
Contact name:
Peter Knorre
Phone: 714 549-0336 URL:
www.calmont.com
ISO9001 certified manufacturer of custom-made, precision wire and cable for the aerospace, biomedical, military, sensors and robotics industries. Cam Development & Micro Components Inc Hydeville, VT 05750-0177
Contact name:
Stephen D Corbett
Phone: 802 265-3240 URL:
www.camdevelopment.net
Our company was founded by Derek E Corbett a graduate of Northhampton Polytechnic in London England. His sons are carrying the family tradition. Stephen D Corbett has 30+ yrs experience, intruducing the latest CNC machines in production threw inspection. We are a Precision Swiss Turning manufacturer. Capacity from 20mm and down, tolerances from .0003 to 10 microns on finishes. Machines can produce flats, slots, crossholes, contouring etc. Including fine pitch pinions and gears. Up to 1 1/2"" diameter, diametral pitch 20-110 to 160 teeth. Agma 10-12 on small pinions to agma 6-7 on larger gears, prototype to production. Serving the Medical, Military, Aerospace and Commercial Industries for over 40yrs. Quality Assurance Manual, Full SPC, Mil 45208A, Mil 45662A and ISO Compliant. Customer satisfaction is our #1 priority. From hundreds to millions per year. You will not be disapointed. Contact us with all your turning requirements. Cam Engineering, Inc. Lowell, MA 01851-5156
Contact name:
PHAM , BINH
Phone: 978 459-2213 URL: complete contract precision machining and manufacturing company,buil metal parts to spcification. Cambridge Collaborative INC Concord, MA 01742-3302
Contact name:
Stephen Manning
Phone: 617 876-5777 URL:
www.seam.com
Cambridge Collaborative, Inc. is a research, development and consulting firm founded in 1970 in Cambridge, Massachusetts. The firm provides engineering services in vibration and acoustics to clients in both the public and private sectors. We support modeling, testing and product development projects. The staff includes mechanical, acoustical, and aeronautical engineers, most of whom hold advanced degrees. Cambridge Collaborative has developed, sells and supports the SEAM速 and visiSEAMTM computer programs for statistical energy analysis modeling. In addition to telephone support and periodic updates to the software, the company provides client courses for SEAM速 users and public courses on statistical energy analysis. Cambridge Collaborative is a Small Business familiar with government contracting requirements and procedures, having held contracts with both Federal and local government agencies. Overhead rates have been established by the U.S. Government Audit Agency, and the company maintains a Secret facility clearance. Camcorp Industries, Inc. Venice, FL 34292
Contact name:
Mrs Dorian Demarest
Phone: 941 493-0622 URL:
www.camcorponline.com
Short and long runs, Sheet Metal Fabrications, punching, assemblies, aerospace standards, CNC Machining Center, in process of ISO Certification. Cam-Tech Inc. Arlington, TX 76001-7120
Contact name:
Larry Broseh
Phone: 817 784-8482 URL:
www.cam-tech-inc.com
Aerospace structural and airframe parts, mfr. of titanium, aluminum, alloy, stainless, and inconel parts. Mfr. of oilfield and construction drilling equipment; couplings, API threads, etc. Canam Aerospace Inc. Surrey, Br V4N 4X8
Contact name:
R.L. (Bob) Macdonald
Phone: 604 888-7954 URL:
www.canamaerospace.com
Manufacturer of Helicopter External Load Equipment.Cargo Hooks, Synthetic Long Lines, Electric Swivels, Cargo Nets and a variety of other products. Cape Aerospace LLC CAPE CORAL, FL 33909-2917
Contact name:
MARC O. ABRAMS
Phone: 941 574-1446 URL:
Research and developement of small arms systems for the army.Manufacture of 20 and 30 mm gun systems for the u.s. gov. plus variuos other gov. items./ also faa repair station for jt8 & jt9 engine parts.research& development on small arms. CAPE AEROSPACE LLC. Cape Coral, FL 33909
Contact name:
MARC O. ABRAMS
Phone: 239 574-1446 URL:
Capps Mfg., Inc. Wichita, KS 67213
Contact name:
Ron L. capps
Phone: 316 942-9351 URL:
www.cappsmfg.com
Aircraft and Commercial Sheet Metal Parts and Assemblies.Capps works closely with your Engineering team andspecializes in stretch form and fabrication of detail parts and assemblies. Capps is skilled in working with extruded and sheet metal details produced from Aluminum, Titanium, Inconel, Corrosion resistant steels, and other alloys. Capps is nationally known for innovative methods of solving the toughest manufacturing challenges. From high volume contracts to unique aerospace designs, the ""old pros"" at Capps say ""no job is too tough. Caratron Industries, Inc. Fraser, MI 48026-1606
Contact name:
Bryan Barlow
Phone: 586 285-7700 URL:
www.bmtaerospace.com
Caratron Industries is a manufacturer of high technology gearing for the global aerospace industry. The company services four basic market segments within the aerospace industry that encompass: Turbine Engine & Systems, Mechanical Actuation, Helicopter Drive Systems, and Defense. Products are primarily ""build to print"" and manufactured to OEM drawings and specifications. For its size Caratron has an edge over its peers in terms of the depth and sophistication of its up to date equipment, manufacturing capabilities and financial resources. Over the past 24 months Caratron has embraced the six sigma philosophy putting forth the necessary resources to fine tune the companies internal systems and operating processes. In conjunction, manufacturing process improvement teams were established to continuously attack waste, reduce cycle times. Production planning has been enhanced with the implementation of MRP to the companies Visual ERP system enabling it to enjoy an excellent reputation for on time deliveries. Caratron is certified to ISO9002 and compliant with the aerospace industries AS9100 quality system. The company is recognized by its customers, and has a reputation in the industry, for having excellent quality. caravan international corporation New York, NY 10022
Contact name:
MS U CERNUSCHI
Phone: 212 223-7190 URL:
www.caravan-ny.com
distributor, supplier and exporter of aircraft spare parts, electronic components, systems and subsystems, search and rescue, communications, antennae, direction finder, satellite systems and sub-systems, medical equipment and supplies Carden Machine Shop, Inc. Sullivan, MO 63080-1228
Contact name:
William Houtz
Phone: 573 468-4194 URL:
www.cardenmachine.com
Carden Machine Shop (CMS), a Woman Owned Small Business, was founded in 1956 to provide state of the art machining, grinding and minor sub-assembly to the aerospace and commercial industries.Maintaining a stable workforce in excess of 40 employees, CMS is a 46,000 square foot climate controlled facility only one hour southwest of St. Louis. Utilizing our CNC 3, 4, 5-axis mills and high speed machining along with CNC lathes, thread rolling, and cylindrical, center-less and surface grinding capabilities. CMS is one of the most complete and versatile manufacturing operations in the industry.CMS’s quality system is CERTIFIED AS9100 , ISO-9001:2000, D19000, Mil-I-45208A and all of our customer specific quality level requirements. Our quality performance has allowed us to achieve delegated source and “ship to stock” status with many of our clients eliminating the need for customer source inspection.We look forward to the opportunity to be of service to your company Cardona Mfg. Corp. Burbank, CA 91504
Contact name:
CINDY MAYBERRY
Phone: 818 841-8358 URL:
UNDER CONSTRUCTION
We are a precision machine shop. We have been in business since 1967. We are certified as a small disadvantaged business. Cargille Laboratories Cedar Grove, NJ 07009-1289
Contact name:
W.J. Sacher
Phone: 973 239-6633 URL:
www.cargille.com
Cargille started in 1924 is in the business of the development and manufacture of optical liquids calibrated for refractive index for use throughout the many labaoratory disciplines involving microscopy and or optics for example: aerospace, telecommunications, particle identification, hematology, geology, testing labs, art conservations, etc. A Specialty Optical Liquids catalog is available which includes comparative diagrams of glasses and optical liquids. The optical liquids are plotted for refractive index versus dispersion similar to optical glass diagrams provided by optical glass manufacturers. Cargille's other catalogs include data sheets on disposable beakers, heavy liquids, immersion oils, refractive index and immersion liquids, plastic boxes, reference
sets, sample storage systems, micro slide and tissue file boxes and viscosity tubes. Major products: refractive index matching liquids, highly stable laser liquids, immersion oils, mounting media, optical gel, fused silica metching liquids, high refractive index melts, optical coupling liquids, immersion liquids, comminuted optical glasss & mineralogical reference standards and slides for microscopoy, liquid and solid density standards, viscosity tubes, graduated disposable beakers and other scientific and laboratory specialties. Carlisle Interconnect Technologies (Formerly Tenso Saint Augustine, FL 32092
Contact name:
Karissa Ickes
Phone: 904 829-5600 URL:
www.carlisleit.com
Designs and manufactures high performance interconnect solutions encompassing every facet of design and production: Aerospace Wire/Cable and Assemblies, RF/Microwave Cable, Connectors and Assemblies, Electronic Manufacturing Services, and Medical Cable Assemblies. Products are targeted at applications in the aerospace, defense electronics, wireless infrastructure, optical telecommunications, test and measurement and medical industries. CARLYLE INC SEATTLE, WA 98188-4807
Contact name:
John Featherston
Phone: 425 656 URL: www.carlyle-inc.com Carlyle's primary businesses include; custom commercial and mil-spec Aircraft harnesses and bulk mil-spec wire & cable, Boeing, Airbus and Aerospace compliant Ethernet assemblies & bulk wire and cable. Carlyle stocks & sells Physical Layer Networking products, including Cabinets, racks, patch panels, bulk copper Cat5e/6 - & fiber optic cable PDU's & KVM's.We also design and build Rapid Deployment Data Center Installations Cascade Casket Mfg Company Kent, WA 98031
Contact name:
Ms LeeTerry
Phone: 253 854-1800 URL:
www.cascadegasket.com
Molded rubber products, molded silicone and silicone foam, aero-dynamic seals, die cut gaskets & water jet cutting. Specialty rubber compounding and specialty sheet stock availability.Our 55 year reputation in aerospace is based on our knowledge of rubber & silicone science and its application and our speed of manufacture & delivery. Orders are commonly filled in two weeks and less with six weeks delivery being the norm. Cascia & Associates STEVENSVILLE, MD 21666-2522
Contact name:
MARK CASCIA
Phone: 410 604-2127 URL:
www.CasciaAndAssociates.com
Cascia & Associates is an Aerospace Engineering firm specializing in Spacecraft Systems Engineering, Program and Project Management, Design and Analysis of spaceflight systems, and verification test plans and procedures Cases by MASCO - Div of MEI Research Corp Murrieta, CA 92562
Contact name:
Ron Rich
Phone: 951 326-3026 URL:
www.casesbymasco.com
Cases U. S. A., Inc. Monee, IL 60449-8059
Contact name:
Suell Kluck
Phone: 800 219-9191 URL:
www.cases-usa.com
Cases USA offers solutions to shipping case needs. From fabricated ATA shipping containers to softsided, zippered cases. Stock and custom designed protection cases for electronic, broadcast, lighting, musical, computer, tradeshow OEM, field equipment and military applications. Cases USA is a woman owned enterprise. Casters.com City Of Industry, CA 91748
Contact name:
KEITH MCKINNEY
Phone: 626 912-1688 URL:
www.casters.com
Easy to use e-commerce source for high quality 'made in US' industrial casters and wheels for aerospace, government and military applications. Competitive pricing. National stock number cross-reference list available. Buy factory direct at www.Casters.com. Call 800-327-6355 for help or email info@casters.com. Castle Butte Consulting Inc Castle Rock, CO 80109-9615
Contact name:
Wesley L. West
Phone: 303 681-3931 URL: Consulting service in aerospace programs specializing in space and intelligence programs. Program reviews, red teams, proposal, M&A evaluations CDM Electronics, Inc. Turnersville, NJ 08012
Contact name:
Mark DeLeo
Phone: 856 740-1200 URL:
www.cdmelectronics.com
<b><i>Provider of interconnect products and Value Added Contract Services for missiles, destroyers, helicopters, short-takeoff fighters (STOVL), UAVs, submarines & aircraft carriers.</b></i> <br>Stocking distributor of circular, audio & communications, filtered, printed circuit, rack & panel, and RF connectors; RF cables, test cables, semi-rigid cables. Contract services include connector assembly, <a href=""http://www.cdmelectronics.com"" target=""_blank"">Cable Assembly</a>, <a href=""http://www.cdmelectronics.com"" target=""_blank"">Wire Harness</a>, design assistance, logistical, packaging and technical support. ISO 9001 Certified, UL Listed, NEDA Supplier Authorized Distributor. <br>Principals include Times Microwave Systems, WPI General Connector, WPI Viking, Winchester Electronics, 2E Mechatronics. QPL approved for many MIL standards. <br><br>NAICS Codes include: <i>331422, 331491, 335929, 331319, 423610, 334417, 336413, 334419, 423690</i> CENTURY FASTENERS CORP. ELMHURST, NY 11373
Contact name:
Tom Brodsky
Phone: 718 446-5000 URL:
www.centuryfasteners.com
International wholesale distributor of fasteners, electromechanical components and electronic hardware, as well as value-added inventory management services, selling to OEM's and CEM's in such industries as electronic, telecommunications, computer, military, aerospace, industrial, automotive, security, and white goods. industries Certified Fabricators, Inc. Buena Park, CA 90620-1040
Contact name:
Bill Bedell
Phone: 714 670-1491 URL:
www.certifiedfab.com
Machining, Fabrication, Assembly, Tooling Certified Industries II, LLC PHOENIX, AZ 85027
Contact name:
Jim Dooley
Phone: 623 516-1227 URL:
www.certifiedind.com
Sheet metal fabrication, certified mig and tig welding, precision and prototype machining, FAA Repair Station, JAA Repair Station, NADCAP AccreditedSpecializes in aerospace. CFW/Precision Metal Components Grover Beach, CA 93433
Contact name:
John Spinas
Phone: 805 489-4670 URL:
www.cfwpmc.com
CFW/Precision Metal Components is a full service metal manufacturer. We specialze in Drawn and Stamped metal enclosures for the Electronics, Medical Device, Aerospace industries amoung many other industries. Other specialities include custom Hand Fabrication, Machining, Deburing,CNC machining,Prototype Engineering to name a few. We are a divison of California Fine Wire an industry leader in Wire Forming. Our website will give detailed information regarding our capibilities, or e-mail or fax request for quotes to tstieger@cfwpmc.com. We look forward to working with your company. Chandler Interconnect, Inc. San Diego, CA 92128-3768
Contact name:
Jeff Chandler
Phone: 858 674-6579 URL:
www.chandlerinterconnect.com
Chandler Interconnect provides design and documentation, as well as prototype/initial production fabrication for custom electrical cables and wiring harnesses, specializing in aerospace and defense applications. Visit our website for more details or contact us to discuss your needs and how we can best serve your organization. Chandler/May, Inc. Huntsville, AL 35806
Contact name:
Steve May
Phone: 256 722-0175 URL:
www.chandlermay.com
Chandler/May, Inc. is a system integration and software development company that provides computer system solutions to the Defense, Aerospace, Telecommunication and Industrial Markets. Chandler/May, Inc. has been providing embedded computer solutions and integration services for the development of tactical ground control shelters, custom computer systems, simulators, test stations and trainers to the military and aerospace industries for over 15 years. Chandler/May Inc.’s UAV Shelter division builds the Shadow Tactical Unmanned Aircraft Ground Control Station that is HMMWV mounted and is currently operational in several military deployments. In summer 2004 a new 25,000 square foot building came online to build, test and integrate UAV shelters. CMI incorporates the latest technologies into these shelters using CMI’s unique integration and test processes for rugged systems. The Computer System Solutions division designs and builds a line of comprehensive open architecture computer systems using COTS components.We have extensive experience building demanding mission critical applications using the latest commercial-off-the-shelf products from the leading VME, CompactPCI, PCI, PC/104 and Sun based suppliers. CMI’s experience spans multiple disciplines including packaging, design, operating systems, middleware, software development, data acquisition and control, storage solutions, networking, video inspection and communications. Channel Islands Opto-Mechanical Engineering, Inc. Ventura, CA 93003
Contact name:
Alan Cornelius
Phone: 805 644-2153 URL:
ciome.com
Channel Islands O-M Engineering is a job shop that provides Optical products(Lenses, Mirrors & Windows)for Space, Aerospace & industrial Markets as well as Optical & Mechanical Engineering Services & Precision Machining for ""build-to-print"" requirements. We specialize in Metal/Optical assemblies & Fast-Turn Prototypes. Chart Industries, Inc. New Prague, MN 56071-1000
Contact name:
Terry Rezac
Phone: 952 758-4484 URL:
www.chart-ind.com
Chart Industries, Inc. is a leading global supplier of standard and custom-engineered products and systems serving a wide variety of low-temperature and cryogenic applications. Chart manufactures a broad line of cryogenic products for the liquefaction, storage, transportation, and use of gases such as helium, nitrogen, argon, oxygen, carbon dioxide, natural gas, and hydrogen, for a multitude of industrial, commercial, and scientific end-users. Chem Processing, Inc. Rockford, IL 61109
Contact name:
Curt Cedarleaf
Phone: 815 874-8118 URL:
www.chemprocessing.co
Chem Processing, Inc. is a company that specializes in platings and coatings for corrosion and wear resistance. We apply many metallic, ceramic, teflon, and other materials that enhance the desired properties of the base material.we are involved in aerospace, automotive, constuction, food,fastener, industrial, and high end commercial products. ChemArt Company Lincoln, RI 02865-4252
Contact name:
Allison Houle
Phone: 401 333-9200 URL:
www.chemart.com
ChemArt designs and manufactures photo chemically etched decorative brass ornaments and collectibles. A Veteran-Owned Small Business (VOSB), ChemArt also manufactures precision etched parts and components requiring exacting tolerances and is ISO 9001:2000 certified. ChemArt provides products for industries including giftware, electronics, industrial and fundraising. We manufacture, sell and market the Baldwin Christmas ornaments and official White House ornaments. Located in Lincoln, RI, our products are made on premises. Chemetall Foote Corp Kings Mountain, NC 28086
Contact name:
Gary Otwell
Phone: 704 734-2677 URL:
www.chemetalllithium.com
World's largest producer of lithium products. Integrated facilities producing numerous lithium chemetals and lithium metal from lithium brine raw materials. Manufacturing facilities in the US, Germany, Taiwan, and Chile. Offices worldwide. Chicago Pneumatic Tool Company york, SC 29745
Contact name:
larry outtrim
Phone: 803 817-7273 URL:
WWW.CHICAGOPNEUMATIC.COM
Chicago Pneumatic was incorporated in 1901. We provide pneumatic and electric tools to the aerospace, light assembly, mvic,truck and trailer manufacturing, petrochemical as well as Maintenance and Repair operations. Chroma Technology Corp. Bellows Falls, VT 05101
Contact name:
Kate Guerrina
Phone: 802 428-2539 URL:
http://www.chroma.com
Chroma Technology Corp. is an employee-owned company that specializes in the design and manufacture of precision optical filters and coatings.Our filters have been developed for a variety of applications: low-light fluorescence microscopy and cytometry; spectrographic imaging in optical microscopy; laser-based confocal and multi-photon instrumentation; and Raman spectroscopy.For each of these applications we provide the greatest accuracy in color separation, optical quality and signal purity. Chromalloy Power Services Corporation San Antonio, TX 78226
Contact name:
SEAN W. DOOLEY
Phone: 210 331-2400 URL:
www.chromalloysatx.com
Overhaul & Repair of Auxiliary Power Units, Gas Turbine Engines & accessories/components for the Aerospace, Industrial & Marine industries. Chrysan Industries, Inc. Plymouth, MI 48170-6
Contact name:
Suk-Kyu Koh
Phone: 734 451-5411 URL:
www.chrysanindustries.com
Automotive Lubricants & Specialty Chemicals.Aviation & Aerospace LubricantsDistributor of BPCastrol, ConocoPhillips, ExxonMobil, Nippon Oil, Petro-Canada, SK Lubricants. Cicon Engineering Inc. Van Nuys, CA 91406
Contact name:
Iris Meister
Phone: 818 909-6060 URL:
www.cicon.com
Manufacturer of Cable and Harness assemblies for aerospace and military related industries. Cicon Engineering, Inc. Van Nuys, CA 91406
Contact name:
Laurie Kertenian
Phone: 818 909-6060 URL:
www.cicon.com
Cicon Engineering serves the cable and wire harness requirements of the aerospace and defense industry. We have a 36,000 sq. ft. facility, which is able to turn out a full range of complex, high volume, and quick turnaround applications including JIT. Cicon offers EDI for quotations, purchase orders, documentation and other transmittals. CINCINNATI THERMAL SPRAY INC Blue Ash, OH 45242-8437
Contact name:
Ed Simonds
Phone: 513 793-0670 URL:
www.cincinnatithermalspray.com
CTS is a thermal spray job shop offering plasma spray, HVOF, dual wire arc and combustion thermal spray coatings that provide wear resistance, thermal protection, corrosion resistance, electrical resistance or conductance and a variety of other surface effects. We also provide dry lubrication services. We also manufacture wear parts for pump and valve applications. We serve the Aerospace, Land based gas turbine, Primary metals, Pulp and Paper, Automotive, Mixer, Pump and Valve markets. Cincom Systems, Inc. Cincinnati, OH 45246
Contact name:
Gloria Daniel
Phone: 513 612-2396 URL:
www.cincom.com
At a Glance ""Founded in 1968 ""World headquarters in Cincinnati,Ohio ""Sales and customer support offices in 20 countries ""5,000 customers in 93 countries hundreds of whom havebeen with Cincom for over 20 years ""Worldwide support network 24x7x365 coverage ""Longestserving CEO in the industry Thomas M..NiesStrategic, mission-critical solutions for: ""Creating and growing customer relationships ""Managing complex manufacturing operations ""Building and maintaining e-business information systemsComprehensive Services and Support ""Application services and hosting ""Consulting for complex customer communications ""E-business solutions for legacy applications ""On and off-shore application development,maintenance andmanagement ""International inbound,outbound and web-based call centerservices Circle Systems, Inc.
Hinckley, IL 60520-1228
Contact name:
MARK ERLANSON
Phone: 815 286-3271 URL:
www.circlesafe.com
Circle Systems, Inc. has been a leading manufacturer of magnetic particles for nondestructive testing for over forty years. Starting as a chemical company, its roots are in the chemistry of particle manufacture, wetting agents, anti-foamers, corrosion inhibitors and pH adjusters. From these roots have grown and developed the first magnetic particles designed specifically for underwater inspection; the first water-based aerosol magnetic particle inspection package; the first magnetic stripe card for quick bath inspection; dual inspection particles; wetting agents and water base carriers that retain all the dispersion benefits of oil, while providing non-toxic and environmentally safe application -- just to name a few.In addition to the proprietary line, Circle is also a laboratory specialist -- recognizing the need for unique requirements that go beyond its proprietary line. For this reason, Circle has developed special products for the particular needs of the railroads, underwater inspection and the steel, automotive and aerospace industries. Circle's chemists, technicians and sales personnel stand ready to provide you with the formulations, fluorescent and non-fluorescent, that will meet your individual requirements.All Circle products are certified to Military, ASTM, AMS and other pertinent standards. Clad Metal Specialties, Inc. BAY SHORE, NY 11706-3402
Contact name:
DENISE MARCOCCIA
Phone: 631 666-7750 URL:
WWW.CLADMETAL.COM
Clad Metal strip for Aerospace, Defense, Automotive, Electronics, Telecom, Appliance and Medical applications. Power Supplies, Lead frame, connector materials, solar interconnect materials, etc.Certifications: AS/NZS ISO 9001:2000 and AS 9100 Rev B:2004 Clean Air America, Inc. Rome, GA 30161-3848
Contact name:
Jorgen Brahm
Phone: 1-706 291-1700 URL: www.clean-air.com Clean Air America, Inc. is an industry leader committed to the manufacture and development of air filtration technology and modular systems that enhance employee well being, protect the environment and increase customer profitability. Our customer base includes aerospace, automotive, laser, mining, medical equipment and construction equipment manufacturers and robotics intergrators. Clean Energy Consulting Corporation PLAINFIELD, IN 46168-8174
Contact name:
Sy A. Ali PhD. P.E.
Phone: 317 839-6617 URL:
www.cleanenergyconsulting.com
A small business consulting organization with expertise in electric power, aerospace, the environment and regulatory policy. Clean Energy Consulting is established to assist business and engineering customers on:"" Project management "" Project planning and business case modeling "" Implementing energy and aerospace projects"" Design and development"" Protecting the environment"" Participating in regulatory policy development.MISSION: The mission is to provide oversight services to customers by promoting clean, environmentally superior, power generation; aerospace systems design; environmental protection; and regulatory policy assistance.OBJECTIVE: Assist customers with technology research and development, feasibility studies, product planning, proposal generation, and the selection of power generation sources and aerospace systems, which would utilize clean fuels, protect the environment, offer high performance, and be cost effective. The company is registered as a small business with the following organizations and agencies:"" DNB "" CCR"" SBA ProNet"" Cage Code"" GSA"" TPIN"" Opportunity IndianaPROVIDE CONSULTING SERVICES ON:"" CLEAN, HIGH EFFICIENCY, POWER GENERATION AND PROPULSION SYSTEMS DESIGN AND DEVELOPMENT- Design and development of environmentally superior power generation products and propulsion systems (gas turbines, jet engines, IGCC, NGCC, fuel cells, life sciences and bio-engineering products), for distributed and central power generation, aerospace, and medical devices applications - Installation and commissioning of power and aerospace products - Cost effective equipment selection and system design and integrationConventional and renewable fuels based energy systems- Product reliability, availability, durability and maintainability- Product support- Component and system testing- Structural design, turbo-machinery aero-thermal design, preliminary design, system optimization- High temperature materials (metallics, directionally solidified and single crystal alloys, ceramics)Technology research and development"" PROJECT MANAGEMENT AND PROGRAM ADMINISTRATION- Large or small projects with internal finances and/or Federal Government contracts- P&L analyses, business case evaluations (cash flows, return on investment, payback, capital investment, market assessment, risk assessment and mitigation strategy development). Proposal generation and follow-up with potential sponsors- Program management oversight (earned value or other software models to monitor budgets, schedules, deliverables, critical milestones)- Customer presentations on project status and progress- Executive management briefings- One year and five year budgets development and implementation. Oversight services"" ENVIRONMENTAL ENHANCEMENT AND CONTROL: REGULATORY POLICY INTERACTIONS- Site selection and permitting- Pollution control equipment selection and installation- Multi-media pollution control (air, water, solid, hazardous and toxic waste control) Disposal of power plant solid wastes- Wet lands protection - Environmental remediation; Environmental Management- Carbon management and sequestration- NEPA, NPDES, EIS, PSD, NSR and other environmental permitting documents - Regulatory policy analyses and participation in applications and hearings Clear Lake Filtration League City, TX 77573
Contact name:
Kenny Williams
Phone: 281 534-9112 URL:
www.clearlakefiltration.com
Engineering, Light Manufacturing and Fabrication Services. Click Bond, Inc. Carson City, NV 89706-0713
Contact name:
Steve Welch
Phone: 775 885-8000 URL:
www.clickbond.com
Click Bond designs and manufactures fasteners optimized for adhesive bonding to structure including: rivetless nutplates, studs, standoffs, brackets, cable tie mounts; sleeves; and advanced composite threaded fasteners. Click Bond?s adhesive bonded fasteners reduce or eliminate the need to drill holes into structures for making attachments. We take pride in our ability to assist aerospace and other manufacturers in the use of bonded fastener technology to improve structural characteristics, extend product life, and streamline manufacturing processes. Clifford-Jacobs Forging Co. Champaign, IL 61824-0830
Contact name:
Cheryl Hacking
Phone: 519 6500303 URL:
www.clifford-jacobs.com
Close-Die, Impression Forging for short to medium runs. Capabilities from 3lbs to 800lbs, up to 30"" in diameter and 50"" in length. Carbon, Alloy and Stainless Materials. www.cliffordjacobs.com CNC Machine & Design,Inc. Salt Lake City, UT 84101-2506
Contact name:
Charles Weyrauch
Phone: 801 531-9922 URL:
www.cncmachinedesign.com
CNC Contract Machining of for DOD, Aerospace, Medical, Firearms, and Industrial parts. COAST AIR SUPPLY CO INC Mission Hills, CA 91345-1114
Contact name:
Mariani Salmon
Phone: 8188982288 URL:
www.coastair.com
Coast Air is a small, veteran-owned and operated business, located in Southern California specializing in serving the aerospace industry. We are a current supplier of milspec electromechanical hardware to many Aerospace Prime contractors such as Lockheed and Boeing Our products (Raychem, Thomas & Betts, Panduit, FCI Burndy) are used in cable harness assembly and other products used in aircraft and avionics systems.Founded in 1953, we have received awards from Boeing, Rockwell, ITT, Small Business Administration and Rockwell for superior quality and service. To meet the quality requirements of our industry we have been an ISO 9002 registered company since 1998.Our Website (http://www.coastair.com) has our complete line card (http://WWW.COASTAIR.COM/fs_products.html) along with our Mission Statement (http://WWW.COASTAIR.COM/fs_about.html).To check our complete inventory: (http://www.coastair.com/fs_search.html). For future quotes you can contact anyone in sales:Mark markv@coastair.comKaren karent@coastair.comIrma irmah@coastair.comOr can call 818-898-2288 or FAX 818-361-8918 Coast Metal Craft, Inc. Rancho Dominguez, CA 90221
Contact name:
Tom Thompson
Phone: 310 537-0570 URL:
coastmetalcraft.com
Flex Metal Hose, Metal Spinning, Sheet Metal Fabrication/Assembly, 4 Axis CNC Machining, 550 Ton Forming Press, Welding (TIG & SPOT,) Penetrant Inspection, X-Ray inspection. Approved by all Aerospace Prime Contractors, The U.S. Army and Air Force. coast precision enterprises inc. San Diego, CA 92121
Contact name:
Paul Sramek
Phone: 858 695-9585 URL:
www.coastprecision.com
Coast Precision is a machine shop manufacturing machine parts for: aerospace,electronic,semiconductor,telecomunication,automotive and medical industris. We have a R/D, prototype, short run and production run capabilities on our manual and CNC high production equipment.We are platinum source supplier for Northrop-Grumman Coastal Aerospace Inc. Melfa, VA 23410
Contact name:
Bruce Freeman
Phone: 757 787-3704 URL:
www.coastalaerospace.com
Overhaul & Repair of Garrett, Allied Signal & Honeywell 85 & 95 series Auxilliary Power Units & components Coax Incorporated Glen Rock, PA 17327-1011
Contact name:
Ande Anderson
Phone: 717 227-0045 URL:
www.coaxcables.com
Cole Instrument Corporation Santa Ana, CA 92799-5063
Contact name:
David Bray
Phone: 714 556-3100 URL:
www.cole-switches.com
Designs and manufactures precision rotary switches and optical encoders for military and aerospace applications. Coleman and Associates, Model Makers Houston, TX 77065
Contact name:
RICHARD COLEMAN
Phone: 281 890-8290 URL:
www.coleman-associates.com
Coleman, Charles S. Millersburg, PA 17061
Contact name:
Justin Kaufman
Phone: 717 692-4444 URL:
www.colemans.com
Supplier of government surplus tank, armored carrier, automotive, aerospace and ship parts. Collis Tool Corporation Camanche, IA 52730
Contact name:
Chris Rodriguez
Phone: 563 259-2454 URL:
www.collistool.com
Collis Tool Corporation is a stocking manufacturer of metalworking toolholders and accessories. 10,000 + SKU's. Specializing in AT3, V-Flange, BT, NMTB, HSK Holders, Collets and a complete line of Automotive and Aerospace tooling. Major supplier of precision CNC Bushings and Holders. Standard items include Coolant Gland Coolant thru holders, Balanced toolholders, Sleeves, Split Sleeves, Drill Chucks, Hydraulic Holders, Mill Chucks and R8 kits. Major manufacturer of Quick Change Tooling Systems, Adapters, Collet Nuts, Spanner Wrenches, Shrink Fit Holders, Floating Holders, Solid and Tension/Compression Tooling Systems. Colonial Wire & Cable, Inc. Sterling, MA 01564-2415
Contact name:
Debra Foley
Phone: 978 422-6000 URL:
www.colonialwireandcable.com
Stocking distributor of Mil-Spec wire and cable products, aerospace wire and heat shrink tubing Command Electronics Co Kansas City, MO 64134-0142
Contact name:
P G KOTSIFAKIS
Phone: 816 761-3514 URL:
www.airdata-testers.com
Manufacturer/distributor of aircraft Airdata Calibrators and Pitot/Static System testers. Small business with under 100 employees. Originally an FAA-certificated Avionic Repair Station since 1965. Cage Code 0YY64 Commercial Aircraft Products LLC Wichita, KS 67213
Contact name:
Dan Kilby
Phone: 316 942-7987 URL:
www.comairprodllc.com
We are a manufacturer of electromechanical systems, structural components & detail assemblies for aviation, automotive & industrial markets. We have a complete CNC precision machining facility for prototype, short run & production of component parts. Our Cad-Cam design, engineering & assembly facilities are capable of meeting customer requirements for precision components & assemblies. We are an FAA approved repair station #CGRR546K Communication Coil, Inc. Schiller Park, IL 60176
Contact name:
E. Goldmann
Phone: 847 671-1333 URL:
www.communicationcoil.com
Design aand manufacture of Custom electromagnetic components including: coils, inductors, baluns, RF filter networks and transformers for RF and Power applications at frequencies fron 400Hz to 2GHz complete technical representation, inc. IRVING, TX 75063-2209
Contact name:
stace symonds
Phone: 972 621-1111 URL: distributor and manufacturer of aerospace filtration products. Composite Engineering, Inc Sacramento, CA 95838
Contact name:
Matt Cano
Phone: 916 992-5216 URL:
www.cei.to
Developer and manufacturer of custom composite structures. R & D, Engineering, Compression Molding, Autoclave Pressing, Metal-to-Metal Bonding. In-house machine shop, Tooling and Secondary Operations Composite Mfg. & Research, Inc. Princeton, TX 75407-4839
Contact name:
Thomas Foster
Phone: 972 734-0117 URL:
(no http://)
est 1990 RESEARCH AND DEVELOPMENT SPECIALISTS, MANUFACTURE OF AEROSPACE
COMPOSITES. MANUFACTURING PROCESSES USED RTM, VAC BAG,COMPRESSION MOLDING,WET LAYUP, USING CMR PATENTED PROCESS. CNC MACHINING OF COMPOSITES, AMMO CAN FABRICATION AND ACCESSORIES USING GRAPHITE, KEVLAR, CERAMIC, FIBERGLASS, EPOXY, BENZOXENE, VINYLESTER RESIN SYSTEMS. Compucraft Fabricators, Inc. Montgomeryville, PA 18936
Contact name:
Jim Shafer
Phone: 800 366-7108 URL:
www.metalwork.com
Precision metal fabricators servicing Aerospace, Electronic and High-Tech industries from prototypes thru production. CNC rotary axis laser cutting for quick, precise machining of complex profiles. Complete design & engineering capability in-house. Call us at the prototype stage. Quality Assurance to MIL-I-45208A. Pharmaceutical / Food Grade metalwork with finishes to meet FDA requirements.Electronic File Transfer. E-mail your drawings to sales@metalwork.com for a prompt quote! Connect Group, Inc. Millersville, MD 21108
Contact name:
Lorraine Johns
Phone: 410 729-5000 URL:
www.connectgroupinc.com
Connect Group manufactures a wide variety of high quality cable assemblies, wire harnesses, and electro-mechanical assemblies. Capabilities include design through production of commercial, industrial and aerospace interconnection production. Connecticut Jig Grinding, LLC Riverton, CT 06065-1216
Contact name:
Alan Green
Phone: 860 738-8809 URL:
www.ctjiggrinding.com
Connecticut Jig Grinding has been providing manufacturing services since 1969. We offer CNC jig grinding and CNC machining manufacturing services. Contact us today with your job requirements. SIC codes 3599, 3541, 3544. Consensus Technology, LLC Seattle, WA 98103
Contact name:
James H. MacConnell
Phone: 206 524-8555 URL:
www.consensustech.com
Consensus is a consulting firm specializing in integrated product team operations in the aerospace R&D environment. Focusing on the unique needs of multi-functional R&D teams, Consensus provides technical expertise in advanced aerospace structures and innovative
concepts AND in all aspects of team operation: formation, leadership, program operations, problem solving, decision making, documentation, and communication. Control Products Corp. Grand Prairie, TX 75051
Contact name:
H. Wayne Hanks
Phone: 972 264-0368 URL:
www.cpctexas.com
CPC designs and manufactures integrated lighting systems including night vision imaging compatible systems (NVIS) for military and commercial applications. AS9100 certified specializing in Interior and Exterior Aircraft lighting, Edge-lit cockpit controls and displays, Flight Worthy Black Box, Flight Simulation Electronic Components and Structures. Controls Research, Incorporated Slidell, LA 70461
Contact name:
Paul J. Hoffman
Phone: 985 788-0142 URL:
www.controlsresearch.com
Controls Research, Incorporated was established in February 2003, and is a Louisiana CCorporation. We provide engineering products and services in the areas of control systems design, analysis, research, development and test. Our staff has over 20 years of experience in the military, aerospace, automotive, and energy industries working with major corporations including: General Electric Company, Westinghouse Corporation, Teledyne Corporation, Ford Motor Company, Visteon Corporation, and Cummins Engine Company. We are a minority owned, small disadvantaged, small and emerging technology firm. Converters, Inc. Huntingdon Valley, PA 19006
Contact name:
Linda James
Phone: 215 355-5400 URL:
www.converters.com
Converters, Inc. is a Preferred 3M Converter of tapes and adhesives. We carry a full line of 3M products that meet the demands of every industry. In addition, we offer an Emergency Tape Program that guarantees same day shipments of roll stock goods. The custom die cut parts we provide offer great design ability, accurate placement and ascetically pleasing results. Our entire staff is dedicated to providing customers with remarkable products that will keep your production at an optimum level. CORCORAN gROUP, INCORPORATED Scottsdale, AZ 85259-3204
Contact name: Phone: URL:
JAMES J. CORCORAN
A WOMAN OWNED TECHNICAL CONSULTING FIRM SPECIALIZING IN AEROSPACE, PERFORMANCE AND PROCESS SOLUTIONS. Costa Precision Mfg Corporation Claremont, NH 03743-0990
Contact name:
James Zullo
Phone: 603 542-5229 URL:
www.costaprecision .com
Courage Enterprises, Inc. Sunrise, FL 33351
Contact name:
HARRY BOUVIER
Phone: 760 439-8844 URL:
www.courageenterprises.com
COURAGE ENTERPRISES IS IN THE BUSINESS OF ELECTRONIC COMPONENTS FOR AREAS OF THE ARMED FORCES, THE AEROSPACE INDUSTRY,THE TELECOMMUNICATION INDUSTRY. WE ARE WHOLESALER AND DISTRIBUTOR OF CONNECTOR,CABLY ASSY., BACKSHELLS, AND OTHERS. WE ALSO PERFORM OUTGASSING FOR AEROSPACE PARTS. Craftech Metal Forming, Inc. Perris, CA 92570-6738
Contact name:
Al Rinaldo
Phone: 951 940-6444 URL:
www.craftechmetal.com
Sheet metal job shop fabricator specializing in drop hammer and titanium hot forming/sizing applications for the aerospace industry. typically build parts and assemblies to print. Customers include most major defense contractors. Creative Coatings Incorporated Front Royal, VA 22630-0809
Contact name:
Dale R Miller
Phone: 540 636-7911 URL:
www.coatingsusa.com
Applications of industrial chemical coatings, powder coatings, and screen printing for original equipment manufaturers. Specialties include Mil-Spec, RIF AND EMI SHIELDING, CARC, DEFENSE, Electronics, FED STD, and Aerospace. Creative Precision Phoenix, AZ 85027
Contact name:
Allen Kiesel
Phone: 623 587-9400 URL:
www.cpwest.com
Contract Manufacturer of High Technology Components for Government, Aerospace, Medical and Electronic industries. Crescendo Electronics, Inc. Seal Beach, CA 90740-2935
Contact name:
Alex Saenz
Phone: 562 243-0646 URL:
www.crescendo-electronics.com
Crescendo Electronics is a full service electronic design and development resource. We specialize in embedded computer systems for communication, command and control. We offer general purpose processor and digital signal processor design services. Our software design process adheres to recognized life cycle design practices. We design and develop multi-tasking software systems to run on a variety of Real Time Operating Systems.For aerospace and high reliability designs we perform custom computer peripheral design, development, simulation and verification in VHDL for FPGAs. We have experience with large system designs. CRI a Division of RSI INC. Austin, TX 78744-1661
Contact name:
David Bosco
Phone: URL: www.rsi-cri.com RSI has three operating divisions - distribution division provides electronic interconnect parts to defense/aerospace industries, the CRI division provides rugged COTS products and services including repackaged SGI, HP, Dell, Sun to meet Mil-Spec environmental requirements, and a Custom Services Group that provides custom design and contract manufacturing services including cables and wire harnesses, custom gaskets, electronic packaging and more. Criterion Tool & Die Inc./Criterion Insturment Brook Park, OH 44142-1609
Contact name:
Tanya DiSalvo
Phone: 216 267-1733 URL:
http://www.criteriontool.com
Established in 1953 Criterion Tool & Die, Inc./Criterion Instrument is a female owned company that has been providing custom precision machined parts and assemblies to the aerospace, medical, nuclear and commercial industries. CNC capabilities include milling, turning and Swiss turning on our state of the art machining centers. We can provide you with prototype through production quantities in stainless steel, titanium, inconel, nitinol, and plastics including ultem, nylon, and delrin.We are ISO9001:2000 certified; FDA registered and our manufacturing is in compliance with GMP standards. Allow Criterion to be part of the solution for your next project. Cross & Associates Mfg Inc. Nepean, ON K2E 7Z1
Contact name:
Chuck Sheffield
Phone: 613 226-3002 URL:
www.cam.on.ca
Leader in custom precision CNC machining since 1988. Specialize in production of small to medium size parts for a variety of industries including transportation, medical, telecommunications and aerospace. Able to receive electronic files. Crown Valley Precision Baldwin Park, CA 91706
Contact name:
LISA MILLER
Phone: 626 962-1087 URL: High precision machined parts. specializing in Aerospace & Medical & Hydraulics industries.Cnc turning and milling. all materials CRS Registrars, Inc. MAUMEE, OH 43537-4314
Contact name:
CHRIS CRUMP
Phone: 419 861-1689 URL:
www.crsregistrars.com
CRS Registrars Inc. CRS provides accredited registration services in ISO 9000, QS-9000, TE Supplement, ISO 14001, AS9000, and AS9100 standards. Our mission is to provide a service that exceeds customer expectations with uncompromising quality. This is demonstrated by being consistently ranked year after year at the top in all categories surveyed by Quality Digest magazine. Certification from CRS ensures quality, augments growth and increases profit. CRS also provides additional services, such as a toll free help line and many pre-assessment options. For the office nearest you, please call or visit our Web site.CRS Registrars Inc. Phone: (800) 8917333 Fax: (419) 861-1696www.crsregistrars.com CS Communication & Systems Canada inc Ville St-Laurent, Qu H4T 1Z9
Contact name:
Louis Desjardins
Phone: 514 748-8258 URL:
www.cscanada.ca
CS Canada offers expertise in system software design, verification and integration to the DO178B standard.CS Canada is a subsidiary of CS Communication et Systems , the leading European developer embedded software for aerospace systems. CS Canada is a software services and test-bench supplier to major engine and airframe manufacturers in North-America. CTRL Systems, Inc Westminster, MD 21157-3040
Contact name:
Robert Roche
Phone: 410 876-5676 URL:
www.ctrlsys.com
CTRL Systems, Inc. is a high-tech manufacturer of ultrasound NDT diagnostic devices and instruments (UL101), unique sound analysis, sophisticated signal processing, and maintenance management software(InCTRL). CTRL provides a turnkey solutions to many departments within aerospace, aviation, health, petrochemical, railroad, truck, automotive, manufacturing, and the military. CTRL Systems's growing reputation is built on its commitment to quality, and the philosophy of developing long-term relationships with its customers and advancements of new technologies that promote the effectiveness of equipment reliability. CTRL Systems, Inc. Westminster, MD 21157-3040
Contact name:
Benjamin Fried
Phone: 410 876-5676 URL:
www.ctrlsys.com
CTRL Systems, Inc. is a developer and manufacturer of non-destructive, predictive maintenance products including ultrasonic sensors and software. Since the companyâ&#x20AC;&#x2122;s inception in 1989, CTRL has developed a series of unsurpassed sensors and systems that diagnose the condition of vehicles, industrial machinery, and mechanical components. The company provides practical, affordable solutions to engineering, operations, safety, quality control, and maintenance departments in several industries including aerospace, health, petrochemical, manufacturing, and the military. The performance and quality of CTRL's products are affirmed by such events as NASA's selection of the UL101 ultrasonic sensor for leak detection on the International Space Station and all of the Space Shuttles, and use of the UL101 by the US Military and several large industrial companies throughout the world. CTRL's growing reputation is built on its commitment to product quality, technology advancement, and providing the most complete solution to clients. In 2002, CTRL was recognized as one of the government's best suppliers and awarded the Gold Medal for Quality Performance by Defense Center Richmond, which purchases more than 900,000 items used by military and other government agencies. In 2002, the company was also recognized by the U.S. Department of Commerce for significant new-to-market export sales. CU Aerospace, L.L.C. Champaign, IL 61820
Contact name:
David L. Carroll
Phone: 217 333-8274 URL:
cuaerospace.com
CU Aerospace is engaged in identifying, researching and developing promising aerospace technologies with the ultimate goal of commercializing and distributing these new developments. Four product areas are being pursued at the present time, Laser Products, Space Systems (Electric Propulsion, Solar Sail Technology, Space Systems Software) Aircraft Safety Products and Aerospace Materials. CU Aerospace also provides scientific consulting services in their areas of expertise. CUMING CORPORATION Avon, MA 02322-1121
Contact name:
David Turi
Phone: 508 580-2660 URL:
www.cumingmw.com
Provides a full product line of microwave absorbers, dielectric materials and design, construction of shielded rooms & installation of anechoic chambers. The microwave absorber line is designed for antenna systems and consists of:radar-absorbing tiles and sheets tuned to attenuate a narrow band or multi-band of frequencies. Includes iron, non-ferrous loaded elastomeric-based absorbers and broad-banded foam absorbers made from open-cell and reticulated foam and honeycomb absorbers for high power applications. Dielectric product line includes artificial and standard dielectrics with permittivity in the range of 1.02 to 36, a series of syntactic based dielectric products which feature low weight, good mechanical properties and dielectric properties of 1.22 - 3.00. Materials are available in sheet, block form and as a ""pack-in-place"" material. A complete line of absorbers for Freespace simulation, used in anechoic chambers and bench top test setups. Provides full services of anechoic chamber design, absorber manufacturing and installation operational at or below 100 MHz through 100 GHz. Designs and builds shielded rooms, host building and offers Project Management for Turn-Key contracts.Development of specialty materials for specific applications; and availability of fabricated parts and peel and stick adhesive for ease of application of absorbers into devices. Cummins Aerospace Anaheim, CA 92806-1229
Contact name:
Sean Cummins
Phone: 714 879-2800 URL:
www.CumminsAerospace.com
CURT DECKERT ASSOCIATES INC Santa Ana, CA 92705-1902
Contact name:
CURT DECKERT
Phone: 714 639-0746 URL:
http://www.cdeckert.com
As R&D Specialists in optical technology development and transfer we evaluate strategies and new product concepts by researching potential competition, determining design-to-cost feasibility, design demonstration prototypes, integrate working optical systems, and develop prototypes to commercialize new technologies in medical, computer, measurement, surveillance, entertainment, aerospace, toy, and other areas. Curtiss-Wright Controls, EM Technologies Stratford, ON N4Z 1A1
Contact name:
Peter Ridgen
Phone: 519 271-3880 URL:
www.novatronics.com
Cutting Edge Manufacturing Newbury Park, CA 91320-2157
Contact name:
Roger Likley
Phone: 805 498-6535 URL: We are a CNC machine shop specializing in aerospace, medical and microwave applications. CVI Optical Components Covina, CA 91724
Contact name:
CHUCK HOLT
Phone: 626 967-5281 URL:
www.cvilaser.com
MANUFACTURER OF PRECISION OPTICS SUCH AS WINDOWS,PRISMS,BEAMSPLITTERS, LENSES AND VARIOUS OPTICAL ASSEMBLIES. ALSO PROVIDE COATING SERVICES SUCH AS ANTI-REFLECTIVE COATINGS - V-COATS, BROADBAND ARC, BEAMSPLITTERSHIGH AND LOW PASS FILTERS, REFLECTIVE COATINGS - ALUMINUM, ENHANCED ALUMINUM, DIELECTRIC REFLECTORS, GOLD COATINGS, HOT AND COLD MIRRORS ITO (CONDUCTIVE COATINGS) AND OTHER CUSTOM COATINGS. CWS Coil Winding Specialist Santa Ana, CA 92705-4908
Contact name:
James Lau
Phone: 714 547-4446 URL:
www.coilws.com
CWS designs and manufactures 50/60 Hz, 120 Hz, 400 Hz, 100 Khz, 200 Khz, 500 Khz potted and unpotted transformers with single or multiple outputs for aerospace, military, industrial application. High current (1 amp to 300 amps )inductors, line filters, chokes, and any custom coils and windings. Custom design is our specialty.CWS also manufactures 1 KW to 10 KW Antenna Baluns ( balance to unbalance impedance matching) and Ununs ( unbalance to unbalance impedance matching) for HF frequency band. Cyril Bath Company Monroe, NC 28110-7393
Contact name:
Janet Griffin
Phone: 704 289-8531 URL:
www.cyrilbath.com
A company with cutting edge technology in Sheet Stretch Forming, Extrusion Stretch Wrap Forming, Elastoforming, and Super Plastic Forming for Aerospace, Automotive and Other heavy industrial applications. D & B Industries, Inc. DAYTON, OH 45432-1867
Contact name:
Duain L. Gillott
Phone: 937 253-8658 URL:
HTTP://D-BINDUSTRIES.COM
CNC milling & turning of Hi-temp alloys to aluminum. Serving aerospace industry.
D. J. Grey Company, Inc. Healdsburg, CA 95448
Contact name:
Marla Grey
Phone: 707 431-2779 URL:
djgreycompany.com
For over 17 years D. J. Grey Company, Inc. has been making custom cable assemblies for Instrumentation, Telecommunication, Medical and Aerospace Companies. D. J. Grey Co. offers simple cut and prep of discrete wires, sophistocated electronic instrumentation cables, individual harness assemblies, and component sub-assemblies tailored to customer specifications. We are dedicated to quality without compromise. All of our product are fully inspected, electrically tested and certified prior to shipment. We guarantee on time delivery. Special features include: Tool-up capabilities, KANBAN, JIT, ""Dock to Stock"" deliveries, large volume as well as prototype runs, and we adhere to J-STD, IPC 610 class 3 standards. ""Our most important products are Quality and On-Time Delivery"" Marla J. Grey, CEO D.M.E. GROUP Inc. Gatesville, TX 76528
Contact name:
Hugh McDanel
Phone: 254 4048901 URL: We specialize in design & manufacturing. Our experience in aircraft, aerospace, electromechanical and petrolium spans over 37 years in such projects as, prototype of a devise used in cattle taging, to Blackhawk medical suite helicopter for the Army and Design and manufacture of process and packaging equiptment. D3 TECHNOLOGIES, INC. San Diego, CA 92111-1810
Contact name:
Bob Roland
Phone: 858 571-8563 URL:
www.d3technologies.com
D3 Technologies is a full services, aerospace engineering company specializing in aerospace structural design, analysis, FAA certification and industrial tool design. Using state-of-the-art design and analysis tools (such as CATIA, Unigraphics II, MSC NASTRAN, PATRAN, etc.) D3 provides engineering services to such diverse programs as F/A-18 Service Life Extension, E-2/C2, 747 Large Cargo Freighter, Boeing 787, F-35 Joint Strike Fighter to name a few. DaCo Enterprises, Inc SANDY, UT 84070-1644
Contact name:
Dave Carter
Phone: 801 255-6011 URL:
www.dacoprecision.com
Precision machine shop providing custom machined parts to Aerospace, Electronics & Medical
customers. Shop is equipped with late model CNC Lathes & Machining Centers with 4 & 5 axis capabilities. DaCo is ISO 9002/2000 compliant and has been in business since 1976. DA-Green Electronics, Ltd South River, NJ 08882-0267
Contact name:
Barry E Greenberg
Phone: 732 254-2735 URL:
www.dgecorp.com
For over 33 years, DA-Green Electronics (DGE), a Woman Owned Small Business, has been recognized as a leader in the distribution and assembly of connectors, contacts and related accessories. Our large inventory includes many Mil specifications; Mil-DTL-5015; Mil-C-26482; Mil-C-83723, Mil-C-81703 (SAE), Rack and Panel Connectors and Mil-DTL-22992 Class L compatible power connectors. DGE can also provide Value-Added Services including: Cable Assemblies • Kitting • Marking • Backfilling • Modifications/Specials • Plating. All connectors and assemblies furnished by DGE pass through a rigid quality control system, with processes and procedures in compliance to Military and Industrial ISO Standards. Providing top quality products and excellent service to the Mil-Aerospace, Government and Industrial/Commercial industries; let us help you fulfill your compliance filings. Damaskos, Inc. Chadds Ford, PA 19317-9689
Contact name:
Nick Damaskos
Phone: 610 358-0200 URL:
www.damaskosinc.com
We are a small R&D company that develops systems to measure magnetic and dielectric properties of a wide class of materials in the RF and mm-Wave spectra. These systems consist of fixturing, software and ancillary components and are designed to work with common Anritsu, Agilent and Rohde&Schwarz microwave network analyzers. They consist of coax, waveguide, freespace, cavity, open resonator and Courtney resonator setups, liquid and powder cells with software and training. They are employed in industry by materials manufacturers and their buyers, by aerospace companies, by Government Laboratories and by Universities. Danner Corporation AUBURN, WA 98092
Contact name:
H J Danner
Phone: 253 833-5333 URL:
www.danner.net
Manufactures of aerospace composite structures. Honeycomb slicing, forming, potting, bonding, 5 axis machining upto 10' X 20' X 3'. Autoclave and oven curing. DANVO MACHINING COMPANY Santa Ana, CA 92705-5238
Contact name:
DIANE I VOSLOO
Phone: 714 751-1401 URL:
www.danvomachiningcompany.com
Danvo Machining Company is a Woman-ownedSmallBusiness,Certified to AS9100 Rev B & ISO9001:2000. We specialize in Precision Machining for the Aircraft & Aerospace Industries. Danvo has been established since 1976.Our main customers are Northrop Grumman & Vought A.I.I. DaqScribe Technologies Inc. Centennial, CO 80111-6710
Contact name:
Sam Herceg
Phone: 775 721 URL: www.daqscribe.com DaqScribe Technology, Inc. is a provider of full spectrum of products for the Test and Measurement applications for the military, aerospace and automotive markets. It offers high performance signal conditioning front-ends and data acquisition systems providing a total system solutions. Their Digital Data Recorder (DDR) products can record data at a total rates of 400MB/ Second with real time displays. DaqScribe Technology, Inc. Centennial, CO 80111-6710
Contact name:
Y.S. Yoong
Phone: 303 220-7457 URL:
www.daqscribe.com
DaqScribe Technology, Inc. is a full-service solution provider for the Mechanical Test and Measurement applications for the military, aerospace and automotive markets. The services include selection of transducers, signal conditioner and data acquisition components; system integration, test planning and test management. In order to offer cost-effective solutions, DaqScribe has formed extensive alliances with the leading industry vendors Dare Electronics, Inc. Troy, OH 45373
Contact name:
Karen K. Beagle
Phone: 937 335-0031 URL:
www.DareElectronics.com
Manufacturer of standard and custom electronic and electro-mechanical products, including: Relays, Flashers, Voltage Sensors, Phase Sensors, Frequency Sensors, Power Monitors, Choppers, Radio Transmitters, Receivers, Antenna Couplers, Power Supplies, and other Electronic Sensing and Control Devices. Datum Control Co. Anaheim, CA 92806
Contact name:
ATLEE HITCHCOCK
Phone: 714 414-1170 URL:
www.datumcontrol.com
Datum Control Co. is a growing CNC machine shop. Our customers come from the aerospace, robotics, composites and food processing industries.The largest mill has travels of 120""the largest lathe has travels of 33""We take pride in making quality parts in a timely manner.With our extensive vendor source list we can machine and process all types of parts. Daubert Cromwell LLC Alsip, IL 60803
Contact name:
Joy E. Bitter
Phone: 708 293-7750 URL:
www.daubertcromwell.com
Manufacturer of corrosion inhibitor packaging paper, bags, films, liquids, emitters and devices for commercial and industrial applications where metals need rust-free protection. Primarily used in military manufacturing, storage and export; automotive and component manufacturing; aviation/aerospace, electronics, and other fabricated metal parts industries. Daubert Cromwell is on the QPD for Mil-PRF-3420 VCI papers, and MIL-PRF-22019 VCI films. DaveCo Industries, Inc. Garland, TX 75042-7693
Contact name:
Mark Helterbrand
Phone: 972 272-2561 URL:
www.daveco-ind.com
DaveCo Industries, Inc. has provided manufacturing solutions for 25 years to the aerospace, defense, electronics, energy, entertainment, medical, postal, semiconductor, and telecommunications industries. The company’s core services of precision sheet metal, machining, assembly and finishing are enhanced by its focus on providing efficiency and manufacturability solutions from prototype to production. DaveCo’s ability to meet tomorrow’s manufacturing challenges offers a bright future for the company and its partners. For more information visit www.daveco-ind.com or call 972-272-2561. Davin Inc. Commack, NY 11725-5407
Contact name:
David Zschunke
Phone: 631 499-6363 URL:
www.davin-inc.com
Sales, rentals, leasing, of aviation ground support equipment (i.e. tow tractor, deicers, cargo loaders) Davis Tool Inc. Hillsboro, OR 97123
Contact name:
DON DYKSTRA
Phone: 503 648-0936 URL:
www.davistl.com
Contract Manufacturing for the Aerospace, Medical, and High-Tech industries.
Dayton Aerospace, Inc. DAYTON, OH 45431-1662
Contact name:
Tony Griffin
Phone: 937 423-4300 URL:
www.daytonaero.com
Dayton Aerospace is a small technical services and consulting company that has helped industry and government customers succeed in big ways since 1984. We have a wide range of technical skills and capabilities that can provide you innovative solutions to tough problems. DDC-I, Inc. Phoenix, AZ 85020-3955
Contact name:
Bob Morris
Phone: 602 275-7172 URL:
www.ddci.com
DDC-I, Inc. is a global supplier of software development tools, custom software development services, & legacy software system modernization solutions, with a primary focus on safetycritical embedded applications. Experts in software development for over 20 years, DDC-I's customers are in the commercial, military, aerospace, & safety-critical industries. DDC-I offers compilers, integrated development environments and run-time systems for C, Embedded C++, Ada, JOVIAL and Fortran application development. DDL, Inc. Eden Prairie, MN 55344
Contact name:
Patrick J. Nolan
Phone: 952 941-9226 URL:
www.testedandproven.com
DDL Testing Services provides shelf-life, package, product & material testing services and validation including shock, vibration, tensile, leak, mechanical and environmental testing. Contact us today to find out more about our package and material testing services: http://www.testedandproven.com/federalbuyers Dearborn Electronics, Inc. Longwood, FL 32750
Contact name:
Richard Bergeron
Phone: 407 695-6562 URL:
http://www.dearbornelectronics.com
Dearborn manufactures high performance film capacitors and ceramic EMI filters. The markets served are military, aerospace and high end industrial. The company has been a leading supplier for over 55 years and the manufacturing facilities are located in Longwood, Florida. Dearborn is part of Exxelia group and includes manufacturing of tantalums, aluminum electrolytics, ceramics, magnetic components and more.Besides standard product, Dearborn provides custom designs for customer directed applications.
DEB Manufacturing Inc LAKEWOOD, NJ 08701
Contact name:
RON LYONS
Phone: 732 364-7007 URL:
www.debmfg.com
D.E.B is a designer and manufacturer of rotary viscous dampers for aerospace and industrial applications. These units are made to precise tolerances. Damping rates from 0.5 to 200,000 inlb/rad/sec. Capable of input torques up to 4,000 in-lb. Temperature compensated models are available. Laboratory calibrate and tested. Quality System to Mil-I-45208. Computer Aided Design (CAD) and CNC for precision machining. Typical applications are as rate limiting devices in aircraft flight controls & in satellite solar panels and antennae as well as industrial mechanisms. Defco, Inc. Decatur, AL 35602-1209
Contact name:
J. O. Sims
Phone: 256 353-7697 URL:
www.defco.com
Manufacturer of pumps, hydraulic and pneumatic cylinders, valves, strainers and related items. Custom fabrication and machining including swiss automatic turning. DEFINITIVE SOLUTIONS & TECHNOLOGIES, INC Auburn, WA 98001
Contact name:
Cheryl Amundsen
Phone: 253 854-7179 URL:
www.dstwaterjet.com
DS&T is a machine shop that specializes in waterjet cutting any material from softest foam to hardest metal or composite. Some materials include graphite, titanium, steel, stainless steel, brass, bronze, bullet resistant glass, standard glass,inconel. We can handle extra heavy products up to 3500 lbs. Materials thin as .010"" or thick as 8"" not a problem. DS&T has a waterjet machine that is capable of eliminating tapers on cut when required. Delphi Automotive LLP Troy, MI 48098-2815
Contact name:
Richard Franzi
Phone: 949 660-5701 URL:
delphi.com/connect
Delphi Connection Systems part of Delphi Corporation (NYSE: DPH) is a global connector supplier specializing in the design, engineering and manufacturing of automotive, military specification and commercial interconnect products. Our products support military, defense, aerospace, commercial avionics, automotive, telecommunications, computer & peripherals, medical, industrial and, instrumentation markets. Products include fiber optic and electrical connectors and cable assemblies, high-speed, high density Gold Dot채 interconnects, flexible
printed circuit assemblies, automotive connection systems and industry standard commercial products. Delphi Connection Systems offers customized solutions, worldwide manufacturing facilities, and expertise in advanced technologies for multi-industry connector applications. Visit our website to find out more about Delphi at www.delphi.com/connect Deltek Herndon, VA 20171
Contact name:
Laura Riviere
Phone: 703 885-9697 URL:
www.deltek.com
Deltek provides the most advanced project management solutions to more aerospace, defense, and agency programs than any other company. We combine more than 20 years of industry knowledge with extensive global experience and innovative technology to create software solutions that help you better manage and control business critical projects.Complete project portfolio management, Advanced Earned Value calculations and reporting, Open architecture that'sfully compatible with Microsoft Project and other major planning software. Denison Hydraulics, Inc. Marysville, OH 43040-9504
Contact name:
Rick Rockwell
Phone: 937 644-3915 URL:
www.DenisonHydraulics.com
Products and Services:Products include axial piston pumps and motors, radial piston motors, vane pumps and motors, hydrostatic transmissions, electronic controls and interface devices as well as directional, proportional, pressure and modular control valves. Denison serves the global market with dependable, quality hydraulic equipment and systems for demanding applications where superior performance and rugged durability are required.These include marine and aerospace sectors, Denison products are used extensively on steering gear and cranes; in-deck machinery and stabilizers; mooring winches; pipe laying vessels and replenishment at sea systems; and in aircraft test stands. In mobile and industrial applications, such as mining, quarrying and drilling; earthmoving and construction; environmental waste and recovery; chemical and processing equipment; pulp and paper making; railway locomotion; machine tools, steel making, die casting, injection molding and stamping presses.Since the company was formed in 1931, the Denison name has been associated with many significant advances and achievements in hydraulics technology. In fact, having over 700 patents to its name, Denison Hydraulics Inc. is one of the worldâ&#x20AC;&#x2122;s most innovative developers of high-performance hydraulic products. Derco Aerospace, Inc. Milwaukee, WI 53223-3216
Contact name:
Jenifer Thomas
Phone: 414 371-3565 URL:
www.dercoaerospace.com
Distibutor for OEM Military Aircraft parts. Manufacturer of Northrop Grummond A4, F4, and F5 Aircraft Parts.
Desert Gem Productions INC Albuquerque, NM 87111
Contact name:
CLAY WRIGHT
Phone: 505 293-8908 URL:
www.claywright.net
From exploring the stars (Italian TV, CNN) to understanding the space within (Johnson & Johnson, National Institutes of Health), Aerospace (CBS, Honeywell) subspace (DOE / National Environmental Technology Network) saving space (EPA), secret spaces (Discovery Channel / Secrets of the CIA) and spaced out (Warner Brothers, Canadian MostMusic, HBO). I ve helped clients take their stories to national audiences. Recent clients include:, ABC News, CNN, The History Channel, and EXTRA! PGA, Fox News, AARP, The Travel Channel, AlliedSignal, The Outdoor Channel, Ford Motor Company, US Census Bureau, Boy Scouts of America, Home & Garden TV, Money World Toronto, Film Garden, US Fish and Wildlife Service, Franklin Covey, National Geographic, NEA, CTV& Design_ Net Engineering LLC Lakewood, CO 80227
Contact name:
Vince Tate
Phone: 303 462-0096 URL:
www.design-group.com
Design_Net Engineering (DNet) LLC is an aerospace company focused on Responsive Space satellite technology providing end-to-end instrumentation, avionics, and satellite bus subsystem development. DNet provides systems engineering, real-time software engineering, hardware engineering, real-time space mission simulation, satellite integration and test, and space qualified manufacturing. Small satellite subsystems include attitude control node, power management and distribution, command and data handling, and payload subsystem controllers. DNet is a leader in satellite Plug and Play technology and rapid satellite development methodologies. Dexter Magnetic Technologies Elk Grove Village, IL 60007
Contact name:
Courtney M. Stone
Phone: 847 956 URL: http://www.dextermag.com Dexter Magnetic Technologies, Inc. (DMT) is a global provider of magnetic solutions serving the aerospace & defense industry. DMT provides comprehensive magnetic solutions including the design, manufacture, distribution and field mapping of magnets and magnetic assemblies. For over 50 years DMT has been providing application driven solutions, supported by our industry leading technology, operations and sales teams. These teams provide our customers with swift, cost effective and innovative solutions including magnetron design, microwave magnets, sensors, magnetic gears, couplings and actuators. Our professional staff is determined to provide the highest level of customer service, technical assistance and value for our customers. We are an ISO 9001:2000 registered supplier and are in the process of becoming certified to the AS9100 QMS. DFCI Solutions, Inc. (Formerly Dzus Fastener Co. I West Islip, NY 11795-3116
Contact name:
Stephen Meshover
Phone: 407 926-0231 URL:
www.dfcis.com
Design, manufacture and distribute specialty quick acting fastener solutions. These solutions can be in plated metal, stainless steel and plastic. Products include quarter turn fasteners and latches. DI FRANCES & ASSOCIATES, LLC Wales, WI 53183-9700
Contact name:
JOHN DI FRANCES
Phone: 262 968-9850 URL:
http://www.difrances.com/GenMp.html
PROFESSIONAL SPEAKING - John Di Frances is an international business veteran with 30+ years of global experience including 20 years of professional speaking and senior executive level consulting. His unique presentations focus on the high audience take-away value that results in improved individual and organizational performance. Through carefully developed and targeted keynotes, seminars, conferences, and executive retreats, John empowers his audiences. His highly personable style touches both the mind and the heart. With thought-provoking insights, vivid stories, and frequent doses of humor, John impacts his audiences in a way they do not soon forget. Each presentation is created by John from a blank sheet of paper and is designed for the unique needs of that specific audience. In this manner John provides the vision and impetus needed to take the organization to the next level.ADVISING & CONSULTING John's wide ranging background and global experience enable him to resolve complex client problems without reinventing-the-wheel , by applying principles and strategies already proven elsewhere. He has found that the same core problems are common across aerospace/defense, services, technology, medical, manufacturing, research, financial and insurance. John works within a senior group of consultants, covering a wide range of functional specialities. Dielectric Polymers, Inc. Holyoke, MA 01040
Contact name:
Stacey Sears
Phone: 413 441-9755 URL:
www.dipoly.com
Pressure sensitive tape manufacturer has served a variety of industrial applications including automotive, aerospace, electronics, appliance, biotechnology, wireless communications, graphic arts, high temperature masking and splicing for more than 30 years. The company coats acrylic, silicone and rubber adhesives on poly-coated paper release liners and films such as polyester and Kapton(R).Products include unsupported silicone and acrylic transfer adhesives for high performance bonding applications (supplied self wound and double linered), silicone/acrylic double coated tape, heat activated dry films, plating tapes, splicing tapes, powder coating tapes, thermal transfer imprintable polyimide label stock and protective films.The company also offers custom coating for specialized applications. We work closely with customers to troubleshoot applications, develop variations of existing products or entirely new product configurations, source raw materials for special projects and work with specialty converters for product fabrication. Our small company size allows quick response time for custom coating applications.
Dien Inc. Dallas, TX 75247-5507
Contact name:
Audrey Reed
Phone: 214 634-3436 URL:
HTTP://WWW.DIENINC.COM
Chemical distribution company selling to aerospace, industrial, personal care and food industries. Strategically aligned with national distribution companies for nationwide coverage. In addition partnered with a total chemical management firm. DieTek Tools, Inc. Melbourne, FL 32940-7102
Contact name:
Paul L. Cahan Jr.
Phone: 321 757-3160 URL:
www.dietektools.com
a Veteran Owned Small Business.Precision machining of component parts. CNC and conventional milling, turning and grinding. Serving aerospace, packaging and tool & die industries for 6 years.ISO9000 certification in progress. Digico Reseau Global Inc. Laval, QC H7L 5A1
Contact name:
William Nash
Phone: 450 967 7100 URL:
www.digico.cc
Founded in 1978, Digico Global Network is a provider of advanced manufacturing and end-to-end operations services to original equipment manufacturers (OEMs). Since its inception, Digico has formed solid and successful relationships with many recognizable leaders in such industries as electronics, aerospace, medical/life sciences and security systems. Digital Global Strategies Washington, DC 20005
Contact name:
Nonyem Okolo
Phone: 202 842-3108 URL:
www.digitalglobalstrategies.com
Digital Global Strategies is a U.S. based consulting & technical engineering service company headquartered in Washington DC. DGS brings experience in aggregate engineering, procurement, construction & project management, a proven track record in carrying out all size projects globally in sectors as industry, power, energy,IT, transportation, telecommunications, environment, aerospace, and infrastructure. It helps clients eliminate boundaries, collaborate in innovative procedures, and foster a business culture that seeks improvements. In working with select partners, we serve the world's companies and governments. Digital Optics Corporation Charlotte, NC 28262
Contact name:
Jessica Wargats
Phone: 704 887-7613 URL:
www.doc.com
Digital Optics Corporation (DOC) is a global leader in the technology development, design, and fabrication of micro-optical solutions. Our wafer-based design and manufacturing platform along with our strategic relationships with injection molding and coating vendors enables optical solutions with exceptional performance and quality that are applicable in a variety of markets.Our micro-optics expertise lends itself to many applications across the spectrum. From larger, high performance precision optics, to low cost solutions in different materials, shapes, and sizes, DOC works closely with its partners to arrive at the best solution for a given application. DOC's optical sub assemblies (OSA's) are integrated solutions that offer increased optical functionality with a number of benefits over more conventional approaches such as ease of integration, reduced assembly steps, smaller form factor, manufacturability, and lower cost. This is accomplished by integrating wafer-based passive optical components (diffractives, refractives, etc.) with active components, such as lasers and detectors, along the optical axis through our wafer/die integration platform.DOC provides both semi-standard and customized solutions for aerospace/defense, consumer & medical devices, data storage, semiconductor equipment, sensors, vision systems and more. Driven by an unparalleled commitment to quality, customer satisfaction, technological innovation, and continuous improvement, DOC is a leading optical solutions provider. Diliberto& Associates,Consulting, Inc Tiburon, CA 94920
Contact name:
M C DILIBERTO, P.E.
Phone: 415 435-4675 URL: Fire Protection Engineering Consulting Services for Aerospace, Government & Military Dionics-USA Incorporated Westbury, NY 11590-4893
Contact name:
Kenneth W. Davis
Phone: 516 997-7474 URL:
www.dionics-usa.com
DIONICS-USA Incorporated, the inventor of the Photovoltaic (PV) optically-isolated MOSFET driver, is a major contributor to the advancement of the state-of-the-art in PV optically-isolated Solid State Relays. In addition to expertise in micro-Photovoltaics, we pioneered the use of Dielectric Isolation processing for monolithic high-voltage IC's used in gas-discharge digital displays. We also manufacture capacitors, transistors and display drivers. Dirk Arnold Plummer, P.E. Sea Bright, NJ 07760-2233
Contact name:
DIRK PLUMMER
Phone: 732 219-9553 URL:
www.chemconsultants.org/daplummer.html
CONTRACTOR LIAISON/SELECTION,ECONOMIC EVALUATIONS,EXPERIMENTAL DESIGN&ANALYSIS;GOVERNMENT RELATIONS/CONTRACTOR,MANAGEMENT SERVICES ASSISTANCE,PROJECT MANAGEMENT/DEVELOPMENT,QUALITY CONTROL,RESEARCH&DEVELOPMENT,SYSTEMS ANALYSIS&SYSTEMS DESIGN OF FUSION ENERGY SOURCES Diversified Design Dynamics, Ltd. West Chester, OH 45069-4812
Contact name:
David M. Robers
Phone: 513 942-1924 URL:
www.3dltd.com
Automation, machinery, tooling and product design and assembly inclduing engineering support for finite element analysis, drive system updates, 3,4&5 axis programming, aerospace and automotive cnc machinery. Diversified Technology Group, Inc. Huntsville, AL 35805-6436
Contact name:
Hal Stanford
Phone: 256 722-2127 URL:
www.dtgtech.com
A Business Service Company:Diversified Technology Group, Inc. is a Small Woman Owned Business (SWOB) HUBZone Company supporting the Aerospace and Defense Industry. Our core focus is providing engineering support services, employment,and multimedia solutions since 1999. Dixie Aerospace, Inc ATLANTA, GA 30349-5928
Contact name:
Wesley Miller
Phone: 404 348-8108 URL:
DNB Engineering Inc. FULLERTON, CA 92833-2821
Contact name:
DOUGLAS BROADDUS
Phone: 714 870-7781 URL:
www.dnbenginc.com
Full Service Military, Aerospace and Commercial Compliance test and engineering laboratory offering Electromagnetic Compatibility, Direct Strike and Induced Lightning, Product Safety and Environmental testing and Engineering Services. We specialize in the out of the ordinary, hard to meet requirements. Headquartered in Southern California with 3 facilities in the Western US DNB Engineering Inc. is the most capable EMI/C and Lightning Test Lab in the US. NVLAP, NARTE and DESC Approved for MIL-STD-461 Testing.
DNV Training & Solutions Duluth, GA 30096-7145
Contact name:
Jeff Bohon
Phone: 770 279-0001 URL:
www.dnvtraining.com
DNV is a global leader in management systems and risk management training, assessments and implementation services. Our unique combination of knowledge and experience can help your company become more productive and improve results of your: Risk Management,Quality Management Systems,Safety Management Systems,Environmental Management Systems, andIntegrated Management Systems.DNV's practical training approach can be customized for all manufacturing and service industries. We invite you to join over 11,000 professionals who benefit each year from DNV's comprehensive approach to training solutions. Document Solutions, Inc. Boston, MA 02210
Contact name:
Duff Johnson
Phone: 800 743-7842 URL:
www.document-solutions.com
Document Solutions Inc. is the oldest PDF electronic document service bureau in the world. We deliver services for PDF content applications with a special focus on Section 508 compliance and intelligent forms solutions.All work is performed by US citizens in the US. Clients include agencies of the US Federal and State Governments, General Electric, Raytheon, ChevronTexaco, Textron Aerospace, the World Bank, the United Nations and many others. Work is performed by quotation only. Don Wolf & Associates, Inc. Chatsworth, CA 91311
Contact name:
Mark Wolf
Phone: 818 885-5800 URL:
www.donwolf.com
Don Wolf & Associates is a distributor of industrial valves & instrumentation including: solenoid valves, cryogenic valves, valves for medical equipment, valves for special effects, earthquake gas shut off valves, wireless, ambient air toxic gas monitors, VOC monitors, PID PPM & PPB toxic gas monitors, CO, H2S, LEL monitors, exhaust gas & combustion monitors & analyzers, HVAC instruments, pressure, temperature, velocity & humidity monitors & meters, anemometers, data loggers, IAQ indoor air quality monitors & instruments, dust and particulate monitors. Dorco Electronics, Inc. Santa Fe Springs, CA 90670-5031
Contact name:
Ted Casmer
Phone: 562 623-1133 URL:
www.dorco.com
Manufacturer of custom transformer bobbins, fiberglass tubes/coil forms, fiberglass encapsulation
cases, headers, panels, insulators, angles, gaskets, spacers, shims, stand-offs, washers, and all plastics CNC machined to your specifications. Dorco has been in business since 1958 serving the aerospace and electronics industries. Some of our customers are Abbott Technologies, Babcock, Coast Magnetics, Crane Aerospace & Electronics, L3-Electron Devices, L3Communications-Power Paragon, and Robert M. Hadley Co. Dorco Fiberglass Products Santa Fe Springs, CA 90670-5031
Contact name:
Ted Casmer
Phone: 562 623-1133 URL:
www.dorco.com
Manufacturer of custom transformer bobbins, fiberglass tubes/coil forms,fiberglass encapsulation cases, headers, panels, insulators, angles, gaskets, spacers, shims, stand-offs, washers, and all plastics CNC machined to your specifications. Dorco has been in business since 1958 serving the aerospace and electronics industries. Some of our customers are Boeing, Coast Magnetics, Delco Electronics, Honeywell, Litton Electron Devices, Signal Technology, and Teledyne. DOTec Corp Saint Charles, MO 63301
Contact name:
Dr. Al Gonzalez, PE, PhD
Phone: 314 757-9498 URL:
www.dotecengineering.com
DOTec Inc is an SDB founded in 1991, became a corporation in 1995, military and civilian clients design, analysis and testing of equipment, part, components, entire systems. Perform aircraft fatigue life estimation, cost analysis, value engineering, Spend analysis other services include drafting, re-design of mechanical, electromechanical parts. Design and built construction projects. DOUGLAS & MFG.CO.INC Cincinnati, OH 45241
Contact name:
Sam Corrado
Phone: 513 563-8920 URL:
www.dmachineinc.com
At Douglas Machine our core competence is EDM processing and multiaxis CNC machining. Douglas Machine is a premier manufacturer of both aircraft and land-based gas turbine blades, vanes and related componentes. We have served the OEM jet engine manufacturers and airlines for nearly 20 years as both a component manufacturer and as a certified FAA repair station. Douglas Machine has expertise in virtually all aspects of precision metal fabrication.Today, Douglas also serves non-areospace manufactuerers with highly advanced machining capabilities and technical leadership. Douglas is a privetly held small disadvantaged woman-owned, company. DOVI INDUSTRIES, INC Deer Park, NY 11729
Contact name:
CARLOS DOVI
Phone: URL: PRECISION MACHINE SHOP. WE MANUFACTURE PRECISION PARTS (METAL AND PLASTIC) FOR AEROSPACE AND MILITARY INDUSTRY. Drilube / All Metals Processing , Inc Stanton, CA 90680
Contact name:
Bob Wolfsberger
Phone: 714 828-8238 URL:
www.allmetalsprocessing.com
We are a complete full line metal finishing company specializing in Aerospace. We have been in business for over 58 years. DRS Pivotal Power Bedford, No B4B 1G9
Contact name:
Alexander (Sandy) Barnhill
Phone: 902 832-7353 URL:
www.pivotalpower.com
DRS Pivotal Power, a wholly owned susidiary of DRS Technologies, designs and manufacturers static power conversion equipment in the 100W to 100kW power range for use in military and alternative energy applications.For the last 12 years the company has focused its efforts on the military markets offering low to medium power, custom solutions to specific defence related requirements. In the past year the company has begun a diversification strategy to include products in the industrial markets, specifically the alternative energy sector. DRS TECHNOLOGIES, INC. PARSIPPANY, NJ 07054-3813
Contact name:
Patricia Williamson
Phone: 973 898-1500 URL:
www.drs.com
DRS Technologies is a leading provider of defense electronics systems. Our products are sold to all branches of the U.S. military, major aerospace and defense prime contractors, government agencies, international military forces and industrial markets. We focus on command, control & communications (C3), power systems, intelligence, tactical computers, reconnaissance, surveillance & target acquisition (RSTA), combat training and control systems, test and energy management, and sustainment and support products and services. DRS Training & Control Systems, Inc. Fort Walton Beach, FL 32548-3803
Contact name:
Jeff Singleton
Phone: 850 302-3225 URL:
www.drs-tcs.com
DRS Training & Control Systems, Inc. is a diversified system engineering company located in
Fort Walton Beach, Florida. DRS Training & Control Systems provides design, engineering, and manufacturing services in support of defense systems worldwide. Our products and service areas include electronic systems, controls for weapon systems, simulation and training systems including air combat training systems and threat radar systems, coastal surveillance radars, combat vehicle service life extension programs, unmanned surface vehicles and aerospace support equipment including material handling systems. DSP Consulting, LLC MERRIMACK, NH 03054-4213
Contact name:
Glenn Bernard
Phone: 603 759-9888 URL:
www.dspconsulting.com
DSP Consulting specializes in development and implementation of signal processing algorithms for the aerospace, defense, telecommunications and digital signal processing (DSP) markets. Emphasis is placed on rapid prototyping and leveraging of previously developed technology applied to new problems. Acoustics, communication signals, signal exploitation, direction finding, signal recognizers, signal acquisition, pattern and signal classification algorithms are our forte. DUCOM Inc. Silver Spring, MD 20910
Contact name:
DUKE C CHUNG
Phone: 301 585-0900 URL:
www.ducominc.com
Since its inception in 1985, DUCOM, Inc. (DUCOM) has earned a well-deserved reputation for quality services and management efficiency in the areas of its expertise. DUCOM's excellent performance is well documented as a Prime Contractor or Subcontractor in support of various projects within the Federal organizations. DUCOM has its six (6) branch /field offices in U.S.A. and one (1) in Seoul, Korea. <P>DUCOM is a woman-owned, small disadvantaged business (WO/SDB) firm specializing in Engineering and Technical Support, Telecommunications, Aviation/Aerospace Programs, Systems Design and Integration, Information Technology, Data Base Development and Applications, Facility Operations, Integrated Logistics Support (ILS), Environmental Engineering, Test & Evaluation, Strategic Planning, Business Process ReEngineering (BPR), Manpower Studies, Human Resources Management, Training and Complex Management Consulting Services. Duelmark Aerospace Corporation Cambridge, VT 05444
Contact name:
Mr Sewall B. Rent, Jr.
Phone: 802 644-2603 URL: Duelmark Aerospace Corporation is a full service interconnect system company specializing in military and comnercial applications. We design, develop, prototype, manufacture and repair a wide variety of electrical harnesses/cables and electrical enclosures. Duer Advanced Technology & Aerospace, Inc. Vienna, VA 22180
Contact name:
Susan M. Duer
Phone: 703 242-9002 URL:
www.data-inc.com
IT services firm supporting both public and private sectors. Dugan Air Inc Bellevue, WA 98004
Contact name:
Charles Dugan
Phone: 425 453-5553 URL:
www.duganair.com
DuganAir is a multi-person, multi-principal sales rep firm that focuses on high tech sales to the aerospace, medical, semi-conductor, and nuclear marketplaces in WA, OR, ID, and BC. The manufacturers that we represent are all ISO9000 and Boeing D19000 qualified, with excellent delivery and quality records and market tested competitive pricing. DUKES INC Northridge, CA 91324
Contact name:
Gloria Morgan-Richardson
Phone: 818 998-9811 URL:
www.dukesaerospace.com
Dukes Aerospace is a private corporation headquartered in Northridge, CA. USA. Dukes designs and manufactures components and systems for commercial, corporate, military and general aviation aircraft. Dukes has served the aerospace industry for 43 years specializing in the engineering of custom valves, componenets and systems to meet your applications. Our designs are used on the Trident Submarine, the space shuttle, Atlas Centaur Rocket, DC10 airliner, F16 & F18 military aircraft, Citation business jets, and hundreds of other aircraft. Dukes provides support and service to it's customers thru a FAA licensed repair and overhaul station. DUNMORE CORP Bristol, PA 19007
Contact name:
Steve Young
Phone: 215 781-8895 URL:
www.dunmore.com
Metallizer, Coater and Laminator of Plastic Films, Fabrics and Paper.Supplier of Thermal Reflective Film for the Aerospace market. Durex Industries Cary, IL 60013
Contact name:
Debbie Casaletto
Phone: 847 639-5600 URL:
www.durexindustries.com
Durex Industries is an ISO 9001:2000 certified manufacturer of custom electric heaters and temperature sensors for all thermal process applications in the semiconductor, medical, plastics, packaging, adhesives, foodservice, aerospace, steel production, and power generation industries. Durex provides engineered designs from concept and prototype through production. Special testing and services include full x-ray analysis, temperature calibration, life cycle testing, FEA analysis, helium leak tests, and thermal imaging. Duvvuri Research Associates Chula Vista, CA 91910
Contact name:
DR Tirumalesa DUVVURI
Phone: 619 426-0958 URL: Specialises in Scientific and business softwaare design, development. testing, SQA and IV&> ALSO PROVIDES R&D in aerodynamis/gasdynamics of aircraft, missiles and engines. DynaCom Industries, Inc. Johnstown, PA 15902
Contact name:
Kathleen S. Condo
Phone: 814 536-4491 URL:
www.dynacom.us.com
Build-to-print wire harness/cable assemblies [from simple to highly complex and sophisticated] and precision machined parts subcontracts to Defense/Aerospace prime contractors. 8[a] certified; HUBZone qualified; Quality Management System certified to ISO 9001; U.S./Canada Joint Certification Program; Registered Manufacturer of Defense Articles: Directorate of Defense Trade Controls, U.S. State Department Dynacomp Corp FERNDALE, WA 98248
Contact name:
CRAIG EVANS
Phone: 360 366-5442 URL: Design and fabrication of advanced composite aerostructures. Full tooling and clean room facilities. Design using MSC-Nastran and SolidWorks/Mechanical Desktop. Dynacomp Corporation Ferndale, WA 98248
Contact name:
CRAIG EVANS
Phone: 360 366-5442 URL:
www.dynacomp.org
Advanced Composites, Composite Aerospace Structures, Design and Fabrication, Tooling and Consulting, Missles, defense products, Space Vehicles Dynacs Military & Defense, Inc.
PALM HARBOR, FL 34684-1934
Contact name:
DAVID BORGES
Phone: 727 787-1245 URL: Dynacs Military & Defense, Inc. is an engineering firm headquartered in Palm Harbor, Florida, with US field offices in Albuquerque, NM, Greenbelt, MD, and Dallas TX. Dynacs is an experienced and diversified, advanced technology firm, with recognized superior engineering talents and capabilities In the following areas: Dynamics & Control, Commercial Aircraft, Instrumentation, Information Systems, Process Development, Avionics,Aerospace Modeling, Range Systems, Optics, Software Development, Sensors and Sensor Development, Mission Control, Systems Integration, Trainers and SimulatorsSpacecraft Design, Ground Stations, Space Robotics,Human Factors, Radar Imaging, Command and Control Information Systems (C2IS) Dynamic Flowform Corp Billerica, MA 01821
Contact name:
Matthew Fonte
Phone: 978 667-0202 URL:
www.flowform.com
Flowforming is an advanced cold metalworking process that produces seamless, dimensionally precise, thin walled tubing and cylinders. Flowformed components have increased mechanical properties, superior surface finishes and excellent dimensional control.Well known for its efficiency and economical benefits, flowforming has been widely accepted as the process of choice in the fabrication of difficult-to-manufacture military and aerospace components such as rocket motor cases, nozzles, missile tubes, cartridge cases and bomb bodies. Cylindrical, conical, ogivial and/or contoured geometries are well suited for its application. Dynamic Soft Analysis, Inc. Pittsburgh, PA 15213-1851
Contact name:
TANYA C. MILLS
Phone: 412 683-0161 URL:
www.betasoft-thermal.com
BETAsoft Thermal Analysis Software for electronic boards and components provides 3Dimensional heat transfer analysis with fast, accurate results. For over 17 years, BETAsoft has been satisfying hundreds of users worldwide in the aerospace, telecom, automotive industries and more. This user-friendly program is the only thermal analysis available on PC, with seamless interfaces most MCAD and ECAD placement packages. Dynamic Structures and Materials, LLC Franklin, TN 37064-4015
Contact name:
Murray Johns
Phone: 615 595-6665 URL:
www.dynamic-structures.com
Dynamic Structures and Materials, LLC (DSM) specializes in the custom development,
application, and integration of micro and nanopositioning devices and systems for precision motion control solutions. DSM's growth and proven track record are driven by the company's core competencies in specialty actuator design, controls design, power electronics, and system integration including control software. DSM's customer base includes the semiconductor, aerospace, optical component assembly, defense, and automotive industries as well as academic institutions. DYNEX/RIVETT INC Pewaukee, WI 53072-2590
Contact name:
Bruce Peight
Phone: 262 691-0300 URL:
www.dynexhydraulics.com
Dynex manufactures hydraulic components and systems used in demanding applications, such as military earthmoving equipment and towing vehicles; military aerospace test-stands and ground support equipment; and emergency steering systems on ships. Dynex headquarters and manufacturing facility is in Pewaukee, Wisconsin, U.S.A. Power units and custom hydraulic systems are fabricated in Ashland, Massachusetts, U.S.A. A sales engineering office and warehouse in Eaton Socon, UK, serves Dynex customers in Europe, Africa and the Middle East. E C STYBERG ENGINEERING CO INC RACINE, WI 53401-0788
Contact name:
E C STYBERG JR
Phone: 262 637-9301 URL:
www.styberg.com
Contract metal component fabricator, ISO/TS16949, NADCAP Weld/Spotweld, Heat Treat and NDT cert and business for over 80 years E. T. BALANCING INC. Los Angeles, CA 90061-1146
Contact name:
JAMES E. NAPORA
Phone: 310 5389795 URL:
ETBALANCE.COM
Industrial & Aerospace Balancing Services, Balancing & Vibration Measuring Equipment Sales & Service, Spin Testing Services, Balancing Machine Calibration Service Tracable to NIST,High Speed Tool Holder Balancing E.V. Roberts Carson, CA 90746
Contact name:
Scott Gius
Phone: 800 374-3872 URL:
www.evroberts.com
Distributor, manufacturer, Chemical Management and customized packaging of Epoxy Adhesives, Resins, Potting Compounds, Sealants from 3M, GE Silicones, Henkel (formerly
Loctite Aerospace & Loctite Industrial, Huntsman (Formerly Vantico), Emerson & Cuming, SIA, Shell, Dow Corning, Cognis, EaglePicher Energy Products Corporation Surrey, BC V3W 9Y6
Contact name:
Brad Audette
Phone: 604 543-4393 URL:
www.eaglepicher.com
Since its introduction to the industry in 1942, EaglePicher has become the most diversified battery manufacturer in the world. The company has become a leading supplier of batteries for missiles, submunitions, mines, sonobuoys, fuzes and aerospace power backup. Additionally, EaglePicher is a major supplier of energetic devices and pyrotechnic components for military and commercial applications. Producing more than 25 different electrochemical systems, as well as energetic devices, flares, battery packs, electronics and subassemblies, EaglePicher supplies in excess of 1,000 different part numbers to 250 military and commercial customers. Through continued investments in facilities, equipment and technology upgrades and research, EaglePicher is positioned to continue as a world leader in aerospace battery design and manufacturing.Quick Response, Experience, Complete Testing, and Competitive PricingThe special capabilities of engineers, electrochemists, and hardware assembly technicians are brought together as a team dedicated to producing all forms of custom batteries and electronic assemblies for the most demanding requirements.EaglePicher's vertical and horizontal manufacturing integration allows us to produce complete systems with an average of 90% of the materials and components produced by EaglePicher. This results in stricter quality control and more on-time deliveries. In order to ensure the highest quality standards for all items manufactured, EaglePicher Defense is ISO 9001 certified. Through our continued improvements, the Defense Department has initiated several Six Sigma projects as well as ISO 2000.EaglePicher is committed to innovative leadership through teaming with National Labs, universities and third party developers. We can provide intellect in meeting customer design requirements.EaglePicher Energy Products has design and manufacturing capabilities for both Lithium Sulfur Dioxide (Li/SO2) and Lithium Manganese Dioxide (Li/MnO2) cells and batteries.Energy Products has supplied these battery types to both the military and commercial markets. In addition, EPEPC is packaging the LiMnO2 cell chemistry in flexible foilpouches, (Pouch Technology), as well as developing secondary Li-Ion cell and battery Technology for aerospace and premium commercial applications. EaglePicher Technologies, LLC Joplin, MO 64801
Contact name:
Scott Reeves
Phone: 417 623-8333 URL:
www.eaglepicher.com
EaglePicher Technologies, LLC is a leading producer of batteries, battery chargers, batteryrelated electronics and pyrotechnic energetic devices for military, aerospace and medical use. East/West Industries, Inc. Ronkonkoma, NY 11779-6800
Contact name:
Mr. Joseph Spinosa
Phone: 631 9815900 URL:
www.eastwestindustries.com
Business Focus: Design, development, test, manufacture and support of sophisticated mechanical and electronic products which meet customer’s requirements with innovative approaches, cost efficiency and high quality.Specialization: Aerospace and defense markets.Company Statement: East/West is a woman-owned, small business founded in 1968. East/West provides high quality products to customers such as the US Department of Defense (DOD). East/West’s customers are consistently impressed with our solid performance record of quick response, on-time deliveries, and adherence to high quality standards.East/West’s quality standards include being a certified and registered ISO 9001:2000 company, compliant to AS9100, and an approved MIL-Q-9858 supplier with Statistical Process Control (SPC) in place.East/West is independently owned and well established in the Aerospace and DOD community. East/West's management and staff, have been actively engaged in the design, development, testing, manufacturing, and support of products such as aircraft ejection seats, crew and passenger seats, life support systems and ground support equipment since the early 1950’s. Since its founding in 1968, East/West has been developing a team which is particularly proud of its proven ability to manage projects both large and small, through the combination of extensive industry experience and excellent coordination among its departments, vendors, and customers.East/West has consistently been recognized by the United States Small Business Administration as a model small business company, which has provided superior performance as a subcontractor. Major government prime contractors have also recognized East/West for its excellence of program performance. This performance is the reason East/West is a preferred supplier to major aircraft manufacturers.Products / Services: Products include: aircraft seats (ejection, crash attenuating, crew, troop and passenger), life support systems (emergency oxygen systems and survival kits), ground support equipment (utility floor cranes and tool kits) and medical equipment. Services cover the entire product life cycle with technical and manufacturing support areas; which include overhaul, refurbishment and upgrade of various sophisticated aerospace systems.Clients: US and foreign governments, major aircraft manufacturers, medical and commercial customers. Eastern Aerocast Inc. Lachine, QC H8T 2J8
Contact name:
Jozef Kasuto
Phone: 514 636-7990 URL:
www.eastern.ca
Manufacturer of Ferrous and non-ferrous investment castings for aerospace, electronics, microvave, military and similar applications. East-West Technology Corporation Jupiter, FL 33478-6419
Contact name:
Kittrin Fralc
Phone: 561 776-7339 URL:
www.EWTtest.com
East-West Technology is a full service test laboratory with thirty years experience serving domestic and international clients in private industry and government including the aerospace, automotive, nuclear, safety, medical and defense, and other commercial industries.Our West Palm Beach, Florida facility provides a full spectrum of test services including extreme environmental simulation and custom configurations for hydraulics/pneumatics, vibration/shock (sine and random/srs shock spectrum), acoustic noise, nuclear qualification, high pressure/flow testing, hot air/hot fuel flow, steam testing and more.East-West is A2LA accredited to ISO/IEC Guide 17025 meeting the test laboratory requirements of ISO 9000 series specifications. Our testing experience encompasses all of the standards generally required within most industries
including ASTM, ANSI, NEMA, SAE, FAA, RTCA, IEC, IEEE, NRC, UL, Bellcore, and meets the new dynamic and climatic requirements of MIL-STD-810F. Equipped to test single components or complete systems, EWT provides a Full Service Support Team including Design Evaluation, Research and Development, and On-Site Engineering to meet customer needs for standard or custom testing Eaton Aerospace Electro-Mechanical Systems Grand Rapids, MI 49512
Contact name:
Brian Woloszyk
Phone: 616 831-8232 URL:
WWW.AEROSPACE.EATON.COM
A broad range of highly reliable electromechanical actuators and flight control products including electromechanical primary and secondary flight control actuation systems; AC/DC motors; utility actuators; cockpit throttle quadrants, controls and switches and power drive units. The operation's Grand Rapids, Michigan facility offers design knowledge and experience in linear and rotary electromechanical actuation with AC or DC brush and brushless motors, electronic motor controllers, servo drive electronics and mechanical assembly. Eaton Aerospace L.L.C Sarasota, FL 34243
Contact name:
Mattie Rhodes
Phone: 941 751-7115 URL:
Aerospace.eaton.com
Engineered interfaces including relays, toggle and rocker switches, miniature switches, limit switches, push-button switches, remote control circuit breakers and power and load management systems. Products and systems from this facility, located in Sarasota, Florida, function to control, switch and distribute electrical power in commercial and general aviation, military aircraft and offhighway vehicle markets. Most products and systems have to perform in very harsh environments and require an extremely high degree of performance reliability.Eaton Aerospace Power and Load Management (PALM) business unit located in Sarasota, Florida is pleased to announce the acquisition of Mechanical Products Inc. aerospace product lines of Jackson, Michigan. Eaton PALMâ&#x20AC;&#x2122;s acquisition includes both thermal and magnetic actuated electro-mechanical manual circuit breakers and a family of Remote Control Circuit Breakers. Eaton Aerospace LLC Glenolden, PA 19036
Contact name:
Pat Birch
Phone: 610 522-4099 URL:
www.aerospace.eaton.com
Manufacturer of oil debris monitoring, sensing and measuring equipment and accessories and pressure switch and transducer products. EATON Aerospace, Engineered Sensors Bethel, CT 06801
Contact name:
Ed Napierkowski
Phone: 203 796-6046 URL:
www.aerospace.eaton.com/pressure.html
EBTEC Corp. Agawam, MA 01001-0465
Contact name:
Mark C. Hauser
Phone: 413 786-0393 URL:
www.ebteccorp.com
EBTEC is dedicated to high-energy beam and manufacturing positioned as the leader in industry. Celebrating 46 years, EBTEC's high-energy beam services have been their core strength. Highenergy beam processes include; electron beam welding, laser cutting, laser drilling, and laser welding services. Abrasive waterjet cutting and drilling, EDM processing, Vacuum Furnace, and plasma welding services augment this core. Complete manufacture enhances current offerings strategic to our growth. Visit our web site for additional information - www.ebteccorp.com. Efkay Associates Islamabad, Pu 44000
Contact name:
Farooq Khan
Phone: URL: www.efkay.net
EHMKE MANUFACTURING CO INC Philadelphia, PA 19124
Contact name:
Robert L. Rosania
Phone: 215 324-4200 URL:
www.ehmkemanufacturing.com
Ehmke is an industrial textile / technical fabrics manufacturing company specializing in acoustical blankets, aerospace fabric products, military specification materials, fabric cases, bags, covers, tarpaulins, straps and web assemblies. Ehmke offers fabric design, engineering, manufacturing and installation services. Ehmke Manufacturing Co., Inc. Philadelphia, PA 19124
Contact name:
Robert L. Rosania
Phone: 215 324-4200 URL:
www.ehmkemanufacturing.com
Ehmke is an industrial textile / technical fabrics manufacturing company specializing in acoustical blankets, aerospace fabric products, military specification materials, fabric cases, bags, covers, tarpaulins, straps and web assemblies. Ehmke offers fabric design, engineering, manufacturing and installation services.
EKLA-TEK, LLC Consulting Phoenix, AZ 85048-8675
Contact name:
Eli Kawam
Phone: 480 706-8561 URL:
www.eklatek.com
EKLATEK Provides Design and Development Engineering Services to the Aerospace Industry for Electrical Power Systems and Power Electronics. We Perform Analysis, Design, Troubleshooting, Development, EMI/EMC, Thermal and Structural Assessment and Design, Design Review Support, Subcontract Technical Management, Customer Interface and Coordination ELA Irvine, CA 92612
Contact name:
Adriana Chirilov
Phone: 949 222-2760 URL:
www.ela1.com
ELA is a GSA-approved vendor (GS-10F-0165N) and an SBA-registered small business firm providing language translation, interpretation and training for the US Government and private businesses. We provide advisory assistance to global business development.Our clients include a number of industrial, technology, aerospace, defense, healthcare, biomedical, education, government and private firms.We recruit linguists to be deployed arpund the world or for role playing excercises Electromech Technologies Wichita, KS 67217
Contact name:
Vanni Traves
Phone: URL: http://www.electromech.com
Electronic Design & Research Inc. Louisville, KY 40258
Contact name:
V SHVARTSMAN
Phone: 502 933-8660 URL:
www.vsholding.com
During the past 5 years EDR Inc. has been developing and manufacturing a variety of AC, DC, AC/DC, NO & NC and TOTEM output Solid State Relays (SSR) and Solid State Power COntroller (SSPC) Module for Aircraft or Navy in 115VAC/200VDC applications.A SSR is a powerful switch designed to outperform a mechanical type relay. Designed specially for high power motor controls, inverters, switching power supplies, choppers and high energy pulse circuits in the aerospaces, defense, transportation, industrial and medical industries. Electronic Hardware Corporation Farmingdale, NY 11735
Contact name:
STEVEN SGAMMATO
Phone: 631 752-9143 URL:
www.ehcknobs.com
Electronic Hardware Corporation is a customer focused supplier of molded plastic components and assemblies. EHC supplies control knobs, pointers and dials. Our product line also includes machined aluminum knobs, handles and a variety of items that have aerospace and commercial applications. Electro-Optical Products Corp. Glendale, NY 11385
Contact name:
Ziva Tuchman
Phone: 718 997-8100 URL:
www.EOPC.com
Manufacturer and supplier of stock and custom optical scanners and deflectors (resonant, polygon, acousto-optic, XY raster scanners), choppers and modulators (tuning fork, rotating, electro-optic, acousto-optic), frequency shifters, tunable filters, filter selectors, optical shutters and laser safety shutters.The products are used in industrial, scientific, medical, aerospace and military applications worldwide. IR, UV, vacuum, cryo and high temperature applications available. Elgar Electronics Corporation San Diego, CA 92121
Contact name:
Brandon Ratliff
Phone: 858 458-0281 URL:
www.elgar.com
Elgar Electronics produces Programmable AC Power Supplies and Programmable DC Power Supplies. Elgar Electronics is a world leader in programmable power supplies and related power products sold under the Elgar, Sorensen, and Power Ten brands. The companyâ&#x20AC;&#x2122;s technology plays a key role in industries such as automotive, aerospace, medical, telecom, semiconductor, defense, and OEM applications. Elgarâ&#x20AC;&#x2122;s comprehensive product range includes AC power sources, programmable DC power systems and loads, solar array simulators, and integrated rack power subsystem services. Elgar Electronics is located in San Diego, California. Elite Technical Services, Inc. Ronkonkoma, NY 11779-3020
Contact name:
Donna Keller
Phone: 631 366-2345 URL:
http://www.elitetechnical.com
Elite Technical is the premier provider of technical and engineering consultants and staff augmentation services in the Information Technology and the Aerospace/Defense sectors, nationwide. EMF. Inc. MERRITT ISLAND, FL 32952
Contact name:
GENA CLARK
Phone: 407 453-3670 URL: Manufacturer of precision machining, welded fabrications, and sheet metal components for the aerospace industry. Empire Airlines, Inc. Hayden, ID 83835-7640
Contact name:
Dale Mason-Wargo
Phone: 208 292-3819 URL:
www.empireairlines.com/
Empire Airlines is a 29-year-old 121 and 135 Supplemental Air Carrier whose primary business is operating 60 aircraft in air cargo markets in the United States and Canada. We have two additional divisions. Empire Aerospace, a certificated 145 repair station, provides heavy maintenance and modifications while Reliant Logistics, a charter logistics company, arranges charters for high priority materials and personnel worldwide. Empire Airlines also provides airlines certification services and contract flying. Today Empire employee 230 people and does business worldwide. The ""We Can Do That"" spirit that evolved while securing and fulfilling private and government contracts, drives the company to meet new challenges. EMPRISE CORPORATION Kennesaw, GA 30144-6430
Contact name:
David A. Penz, P.E.
Phone: 770 425-1420 URL:
http://www.emprise-usa.com
Emprise specializes in the design and fabrication of custom test stands and facilities in the automotive, aerospace, alternate and industrial power industries. Emprise projects range from small, bench style test stands to large engine test facilities. We build new and modernize old facilities. EMRAD Aerospace GARDENA, CA 90248-3138
Contact name:
LORENZA M. VITUG
Phone: 310 769-5987 URL:
www.emradaerospace.com
The EMRAD Aerospace is an aerospace engineering and manufacturing company. A Minority Woman-Owned and Small Disadvantaged Business.CAPABILITY:Engineering and Manufacturing of Parts for Commercial and Military Aircraft, Missile, and Space Vehicle.PRODUCTS: Metallic Flexible Joints and Bellows, Ducting, Exhaust System and Airframe Components.ENGINEERING: Concurrent Engineering and Manufcaturing in Product Development Process -from project specification and/or conceptual design through customer approval and/or delivery; Product Design, Analysis, Development and Testing using CATIA ME2; Fixtures and Tooling Design; 3D Solid Modelling, Reverse Engineering and Generation of Production Drawings.MANUFACTURING: Fabrication; Machining; Welding, and Assmebly; Fixtures and Tooling DevelopmentSERVICES: Product Design, Research and Development, Part
Structural Analysis and Testing, Sheet Metal Forming, Ducting, Fabrication, Assembly, Welding and Machining, Tooling Design and Development.QUALITY SYSTEM: EMRAD Aerospace is in compliance with Aerospace and Military requirements i.e., ISO 9000, AS 9000, D1-9000 and MILQ-9858A or MIL-I-45208 as applicable.Lockheed Martin Astronautics Approved Source for Welding Special Process and its entire Quality Systems.PRODUCT MANAGEMENT: EMRAD Aerospace technical people determine the most cost effective manufacturing method, design the proper tooling, and introduce the right process to produce a product with high quality that meets the customer specification; We have a vast of reliable, qualified, and approved vendors/suppliers stored in our computer database whenever an outside resource is needed to meet manufacturing and process criteria, and expedite product development.PERSONNEL: Professionals, technical and skilled individuals, all aerospace-oriented and have years of hands-on experience in the aerospace manufacturing environment.COMMITMENT: Lowest Pricing, Highest Quality, Best OnTime Delivery, and Management Direct Involvement from Initial Marketing Stage Through Delivery of Product.FACILITY: The facility occupies the entire unit with approximate 10,000 sq. ft. of an industrial building. EMTEQ Family of Companies New Berlin, WI 53151
Contact name:
Kellie Griffin
Phone: 262 679 6108 URL:
www.emteq.com
EMTEQ is a design, integration, certification, manufacturing and test facility specializing in civilian and military system integrated installation kits: LRU/equipment, harnessing, RF, LED lighting, mechanical racking, installations, STC and PMA certification. Our facility is AS9100 and FAA PMA approved. Our staff is known for their responsiveness, flexibility, program management and planning capabilities in supporting a variety of avionics and electrical system design, certification, kit fabrication and installations. With our 100 STC and EASA/international office approvals, EMTEQ is experienced with systems including: TCAS, SATCOM, IFE, TAWS, ELT, EFB, LED Lighting integration and more. EMTEQ also manufactures a variety of build to print harnesses and integrated box assemblies. EMW Laser Largo, FL 33773-5305
Contact name:
mike menchen
Phone: 727 548-0452 URL:
www.emwlaser.com
Laser Job Shop with complete capabilities including Laser cutting,welding,marking, deep engraving,and machining. Our company specializes in small and complex projects aimed at the medical and aerospace industries. We have 15 lasers in the Yag and Co2 wavelengths to handle all types of materials such as plastics, metal, ceramic. Over 15 years experience in the laser field. EMW Laser ,Inc. Largo, FL 33773
Contact name:
Michael Menchen
Phone: 727 548-0452 URL:
www.emwlaser.com
Contract laser job shop. Specializing in laser marking, engraving, machining, and welding. Able to process all metals and plastic materials. Our company also has conventional secondary machining capabilities. We specialize in work in the miniture field. 11,000 square feet of manufacturing floor space. Work for the automotive, aerospace, medical, and commerical industries. ENSCO, Inc. Falls Church, VA 22042-4503
Contact name:
Ms. Michele Pennington
Phone: 703 321-4630 URL:
www.ensco.com
ENSCO, Inc. provides engineering, science and advanced technology solutions for the defense, security, transportation, and aerospace industries. A privately held company with a history of innovation spanning four decades, ENSCO is headquartered near Washington, D.C., with field offices throughout the United States and representatives across the globe. Learn more about ENSCO at www.ensco.com Erie Engineered Products, Inc. N.Tonawanda, NY 14094
Contact name:
Virginia Wilson
Phone: 716 694-2020 URL:
www.containers-cases.com
Manufacturer of aluminum and steel containers and cases, as well as thermoformed plastic cases and parts. Our capabilities include design and manufacture of containers/cases for aerospace, electronics and nuclear industry applications. e-Rockies Intl Inc Los Angeles, CA 90020
Contact name:
Hurbert Hur
Phone: 213 200-1992 URL:
www.Rockies-intl.com
1. A leadng company to develop the Advanced Automatic Test Equipment(ATE) system, Special Test Equipment(STE), TPS development, Various Simulators, 2. Electronic Manufacturing & Engineering for military, aerospace and industry (Automation & controls) sectors. 3. International Trading defense ILS, electroncis, communications and IT products, too. 4. We have resources in Asia/Pacific for engineering, manufacturing and International trading, too. ESP Aerospace Fasteners, Inc. Pomona, CA 91768-3286
Contact name:
Louise M. McKinnis
Phone: 909 839-2595 URL:
WWW.ESPAERO.COM
ESP Aerospace Fasteners is a certified Small Disadvantaged Minority Woman owned
business,incorporated in 1991. In addition to those certifications, ESP is also 8a and ISO9002 certified. ESP is a distributor of aerospace hardware and fasteners. Hard to find parts have been our specialty from the beginning. Our staff's years ofexperience, knowledge of the product,aerospace industry and commitment to customer service, go beyond comparison. Essex Industries, Inc Saint Louis, MO 63123
Contact name:
Alicia Bond
Phone: 314 832-4500 URL:
www.essexind.com
Essex Industries is a leading supplier to the Aerospace and Defense, First Response, Safety and Medical markets.The product range has grown to include Life Support & Ground Support Equipment, Platform Controls and Aircraft Components. As a result, Essex Industries has been a part of virtually every major military and commercial aerospace program since 1947. Eutectic Resources, Inc. Brazil, IN 47834-0339
Contact name:
Dean Hoffman
Phone: 812 443-1085 URL: We design, manufacture, install and refurbish all phases or aspects of Industrial Vacuum Systems. These systems are generally found in the Aerospace and/or Medical Heat Treating Industry.From hot zones, pumps,and pumping systems to furnace repairs and installations. Everest Interscience, Inc. Tucson, AZ 85705
Contact name:
Marilyn M. Everest
Phone: 520 792-4545 URL:
www.everestinterscience.com
Everest Interscience, a twenty-five year old firm, manufactures and markets infrared thermometers and infrared temperature sensors. The latest advances in infrared thermometry are offered in these instruments. These innovations include field focusable optics (patent pending) with our Vario-Zooom feature and patented Intra-Optical Light Sighting to determine exactly where a temperature measurement is being taken.Everest's instruments include both high-temperature sensors with plus/minus one degree resolution and low-temperature snesors with plus/minus one tenth degree resolution. They can measure the temperature of objects that cannot be measured in any other way such as fragile or rough target surfaces or objects too hot to measure in other other way. EXB Solutions, Inc. Minneapolis, MN 55416
Contact name:
ROBERT J. SCHMIDT
Phone: 952 541-9889 URL:
www.exbsolutions.com
EXB SolutionsTM, Inc. (EXB) is a software engineering services company that specializes in custom applications, product simulation, and verification and validation (V&V), uniquely, in both the fields of embedded engineering & information technology (IT). EXB’s focus also includes the following industries: defense, avionics/aerospace, medical/diagnostics, government, temperature controls, and professional services. EXB has its headquarters in Minneapolis, Minn. EXB is a Certified Small Business per the U.S. Small Business Administration.EXB develops custom engineering, business, and government software applications, and provides related application integration services. Our expertise includes the following specialties: • Windows-Based Applications • Product Simulators • “Real-Time” Windows Execution • High Reliability Software Design and Development • V&V Tools• Development Tools• Legacy System Updates• PC Security • Image Processing Exotic Metal Treating, Inc. Indianapolis, IN 46203
Contact name:
KEITH SUSKO
Phone: 317 784-8565 URL:
exoticmetaltreating.com
Performs Heat treating and furnace brazing services on aerospace components. NADCAP certified. FAA Repair Station EKXR156L. Falciani Machine, Inc. Madison, AL 35758
Contact name:
Justin Roepe
Phone: 256 461-0900 URL:
www.falcianimachine.com
Falciani Machine is committed to manufacturing precision-machined components for the military/defense, aerospace, aircraft, medical, and commercial industries. Falciani Machine provides precision machining and fabrication to a wide range of industries including aerospace, military/defense, commercial and medical. Using the latest in CNC machining technology, we can quickly manufacture the most complex designs for prototyping to large production runs with close tolerances. FALCON CREST AVIATION SUPPLY CO., INC. Houston, TX 77061-5206
Contact name:
Melissa Waters
Phone: 713 644-2290 URL:
no http://
FALCON ELECTRONICS Commack, NY 11725-5717
Contact name:
Brian Diaz
Phone: 631 3518515 URL:
http://www.falconelec.com
Distributor of electronic components supplying products to Military, aerospace and industrial manufacturers. Product offering includes:Vishay Siliconix, Microsemi, Linfinity, Holt, Optek, Semtech, Semelab, APT, Silicon Sysytems, Satcon/FMIXtreme Semiconductors Farrar Aerospace LLC Ontario, CA 91761
Contact name:
VICTOR TAO
Phone: 909 390-2424 URL:
WWW.FARRARAEROSPACE.NET
QUALITY AND RELIABILITY SINCE 1951MANUFACTURER OF AIRFRAME AND STRUCTURAL COMPONENTSDESIGN AND FABRICATION OF LARGE ASSEMBLIES, HONEYCOMB ASSEMBLIES. FASTENING SYSTEMS INTERNATIONAL INC Sonoma, CA 95476
Contact name:
Mark Herand
Phone: 707 935-1170 URL:
www.fsirivet.com
Fastening Systems International, Inc. is a leading manufacture of blind rivet tool kits featuring mechanical, hand hydraulic, air-hydraulic and 12v DC cordless operated riveters. FSI inventories a wide variety of aerospace blind rivets including CherryMax, Huck-Clinch, Cherry-Lock, OlympicLok, Huck SMLS and Huck Blind Bolts. FSI is an authorized distributor and repair center for Avdel/Cherry Textron, Huck/Alcoa Fasteners, Gesipa/Olympic Fastening Systems, Zephyr Tool/Lok-Fast and AVK Industrial Products (rivnuts). Fatigue Technology Inc Seattle, WA 98138
Contact name:
David Coddington
Phone: 206 246-2010 URL:
www.fatiguetech.com
Fatigue Technology Inc. (FTI) is the world leader in fastener, bushing and fatigue life solutions. FTI pioneered the cold expansion technology over 39 years ago and have advanced this science to develop innovative solutions for bushing installations, fastener applications and aerospace fitting and hardware installations. ISO 9001/AS9100 Registered. Tooling is CE compliant. Independent Materials Testing Laboratory. FEC Technology Corp PLAINVIEW, NY 11803-1606
Contact name:
MATI OREN
Phone: 516 576-7070 URL:
WWW.FEC-TECH.COM
FEC TECHNOLOGY IS A DISTRIBUTOR OF ACTIVE & PASSIVE ELECTRONIC COMPONENET FOR MILITARY/AEROSPACE & TELECOMUNICATIONS MARKETS.WE ARE
DEDICATED TO SUPPLY YOUR COMPONENTS NEEDS WITHPERSONALIZED SERVICE and QUALITY PRODUCTS Federal Technology Group, Inc. Bozeman, MT 59718-6062
Contact name:
Todd Johnson
Phone: 406 586-2997 URL:
www.fedtechgroup.com
Federal Technology Group, Inc. (FTG) is a consulting firm specializing in all aspects of business, technology and product development, as well as technology licensing, and federal technology transfer. In addition to championing the commercialization and development of technologies for government and private entities, FTG develops and manufactures several advanced materials including metal-coated particles, lattice block materials and time-release/microencapsulation products. It works extensively with NASA and the Department of Defense, serving as a liaison to obtain the best outcome for all parties. FTG actively supports U.S. federal laboratories, academic institutions, Global 500 companies, as well as small companies, both domestically and abroad.FTG is built upon bringing innovative technologies to market in many fields, including biotechnology, software, information technology, aerospace, electronics, advanced materials, medicine, and environmental remediation. FTG presents solutions to problems companies face by offering advice and assistance in areas including operations, administrative management, financial planning and budgeting, intellectual property, and new business startups. Federal-Mogul Systems Protection Group Exton, PA 19341
Contact name:
Erin Wright
Phone: 610 280-2491 URL:
www.federal-mogul.com
Federal-Mogul Systems Protection Group is a worldwide manufacturer of innovative protection solutions. The product lines include woven, braided, or knitted textile sleevings or non-woven materials used for abrasion, radiant heat, mechanical, thermal, acoustical and installation protection. We cover a wide variety of industries including automotive, aerospace, military, marine, telecommunications, mining, and electrcical/electronics. Our products include Roundit 2000, CableGuide, Expando, Fyrejacket, and ProGard. For more information please refer to our website or contact our customer service department. FELLFAB Corporation College Park, GA 30349
Contact name:
Julie Glenister
Phone: 905 5609230 URL:
www.fellfab.com
Established in 1952, FELLFAB is a privately owned company that engineers, manufactures innovative textile products. FELLFAB actively serves clients in Military/Defence, Aviation, Aerospace, Industrial, Material Handling, Transportation markets.FELLFAB has the ability to meet MIL specifications, provide testing, certification. FELLFAB is registered under ISO 9001:2000, and AS9100 to ensure the highest levels of quality are achieved. FELLFAB is a technology driven company with a strong commitment to quality, manufacturing excellence and production
efficiency. FenBar Precision Machinists Inc. Thornwood, NY 10594-1348
Contact name:
Mike Allen
Phone: 914 769-5506 URL:
www.fenbar.com
FenBar Precision was started in 1954 as a Prototype and product development machine shop.Today we own our 8000sq ft bldg in Thornwood NY.We employ 18 people as machinists,die makers and machine operaters and have 8 CNC machines, 4 of which are lathes 1 swiss screw machine and 3 vertical machining centers. Additionally, we own 14 punch presses for a total of 54 machine tools for high and small production. Feole Technologies Inc. Johnston, RI 02919-4931
Contact name:
Robert A. Feole
Phone: 401 943-3141 URL:
Feole.com
Feole Technologies Inc. has been in business for 16 years,offering sales,service and engineering of NDT Products.We have over 75 years of experience in the field of NDT.We have ASNT/ACCP Level III Certified personnel on out staff.We sell a full line of NDT Equipment throughout the world.Products include Ultrasonics,X-Ray,Eddy Current,Magnetic Particle,Liquid Penetrant,Video Inspection Equipment,Accoustic Emmission and Special Systems including Ultrasonic Immersion Systems,Magnetic Particle and LiquidPenetrant Systems. Some of the lines we carry are Agfa/Krautkramer,Zetec,Ely Chemical,Parker Research,Talco Systems,Physical Accoustics,SnakeEye Video Equipment andother Video Lines. Ferguson Perforating Providence, RI 02905-0038
Contact name:
Bob Colombi
Phone: 401 941-8876 URL:
www.fergusonperf.com
Ferguson perforates all types of metals, and plastics for the aerospace, filtration, HVAC, and noise abatement industries as well as custom panels for the architectural market. Fiber Innovations, Inc Walpole, MA 02081
Contact name:
Eric Brockman
Phone: URL: www.fiberinnovations.com Fiber Innovations, Inc. (FII) develops and manufactures composite components for the Aerospace, Defense and Commercial Industries. Our capabilities include net shaped braided preforms, braided/stitched preforms, resin transfer molded (RTM) and vacuum assisted RTM
(VaRTM) composite components/products utilizing braided and/or woven fabric preforms. Examples include pressure vessels, tubing, satellite profiles, toroidal structures, fuselage frames and stringers, rotor blades, airfoils/spars and aircraft engine vane/ducting components. FII has received Certificates of Registration to ISO 9001 and AS 9100. Fiber Science, Inc. Palm Bay, FL 32905-3430
Contact name:
Steven D. Fredricks
Phone: 321 726-6327 URL:
www.fiber-science.com
Manmade fibers for textile, industrial, medical and aerospace applications. High temp, meltcolored, chemical resistant, and many more. Fiberoptic Systems, Inc. Simi Valley, CA 93065
Contact name:
KATHY HANAU
Phone: 805 583-2088 URL:
WWW.FIBEROPTICSYSTEMS.COM
FSI is a manufacturer of bulk optical fiber and fiber optic assemblies for OEM and custom applications. FSI has been serving the needs of the medical, machine vison, entertainment, aerospace, and spectroscopy industries for over 20 years. FSI continues to help customers design the most reliable and cost conscious solutions for their illumination and sensing requirements. Findlay Machine & Tool, Inc. Findlay, OH 45840
Contact name:
George Hay
Phone: 419 422-0768 URL:
www.fmtinc.com
FMT, Inc. provides world class parts cleaning systems for industries such as Automotive, Electronic, Metal Finishing, Stamping/Casting/Forging, Fastener/Fittings, Rebuilding, Transportation/Earth Moving, Aerospace/Aircraft, Appliance, and many more.FMT, Inc. manufactures In-Line Belt Systems, Cabinet Washers, Rotary Baskets, Immersion-Agitation Systems, Pallet Cleaning Systems, Monorail Systems, Tube Cleaning Systems, and Rotary Drum Systems for many of the top Fortune 500 Companies. We provide customized units as well, that are designed to meet specific customer needs.FMT, Inc. takes pride in providing the most advanced technologies within today's market. With our highly experienced professionals in house, we are able to engineer fully automated systems to assist in the automation process of aqueous parts cleaning systems.Along with outstanding products, FMT maintains excellent customer service standards that meet or exceed our customer's expectations. All customers receive individualized attention for all of their cleaning needs. FMT provides personnel from many fields to customize equipment required by the customer. FineTest Inc. North Bay Village, FL 33141
Contact name:
NESSIM HAMAOUI
Phone: 305 866-0045 URL:
www.finetest.com
Automated Power Supply Testers, ITA and Functional Test Programs, I2C, EEPROM Programming, JTAG, Burn-In, Hipot, Agilent Technologies Channel Partner. ATE for Military, Aerospace, Telcom, Medical. Our customers include: US Air Force, US Navy, Lockheed-Martin, BAE Systems, Marconi, Nortel, Lucent Technologies, GE Medical, IBM etc. Firan Technology Group Scarborough, On M1X 1A5
Contact name:
Rebecca Rupprecht
Phone: 416 299-4000 URL:
www.firantechnology.com
Firan Technology Group (FTG) is a manufacturer of complex multilayer rigid and flexible printed circuits for the Aerospace, Avionics and high reliability commercial markets. FTG offers Quick turn prototyping capability from 48 hours to high mix low to medium production volumes. The company has expertise in a variety of standard and exotic materials which include High Tg FR4, BT Resin, Polyimide, Teflon, Flex, Thermount, High Speed Dielectrics such as Nelco 4000-13, FR408, Megtron and Gtek. FTG can also provide Buried Capacitance ZBC Licensed), Microvia drilling capability, heat sink machining and bonding, rigid flex and most surface finishes in house. Firan Technology Group, Aerospace Div. Scarborough, On M1H 1H2
Contact name:
Collin D. Latchman
Phone: 416 438-6076 URL:
www.firantechnology.com
Manufacturer of Illuminated panels for Air, land and Sea vehicles and equipment, per SAEAS7788 utilizing, Incandescent, LED and Electro-Luminescent lighting. Also, meeting Night Vision (NVIS) Lighting requirements per MIL-L-85762. FIRST CLASS PACKAGING INC El Cajon, CA 92020-1662
Contact name:
SANDRA BROCK
Phone: 1 619-579-7166 URL: www.firstclasspack.com FIRST CLASS PACKAGING IS A CORE DEALER FOR PELICAN-HARDIGG CASES & SKIDMATES. WE ALSO MANUFACTURE CUSTOM FOAM INSERTS, WOOD CRATES & PALLETS. First Class Packaging Inc. Santee, CA 92072
Contact name:
SANDY BROCK
Phone: 619 579-7166 URL:
www.firstclasspack.com
Manufacturer & distributor of packaging materials.Wood Crates, Pallets, Foam and Foam Inserts, Dealers for Hardigg, Pelican, Flambeau Transit Cases. Primary customers are Aerospace, Military, Industrial and High Tech First Level Inc. York, PA 17406
Contact name:
NABIL HOMSY
Phone: 717 266-2450 URL:
www.firstlevelinc.com
ELECTRONIC MANUFACTURING SERVICE (EMS) Provides microelectronic packaging, design, and contract assembly services.The company has clean rooms with ESD protection. Services include component placement, die attachment, wedge and ball bonding, encapsulation,lead attach, trimming and forming, stud bumping, micropost onto bare die or PCBs, medical device, optoelectronic, and hybrid microelectronic assembly. COB,BGAs, Chip Carriers, and MCMs. Electrical and Electronic Assemblies(5998)Electronic Modules (5963), Fiber Optic Devices (6030),Electronic Microcircuits (5962), Misc. Electrical & Electronic Components (5999), Misc. Fiber Optic Components (6099), Optoelectronic Devices & Associated Hardware (5980), Semiconductor Devices & Associated Hardware (5961). Firstmark Aerospace Corporation Creedmoor, NC 27522
Contact name:
Dianne Turner
Phone: 919 956-4280 URL:
www.firstmarkaerospace.com
Firstmark Aerospace designs, manufactures, and repairs precision electronic, electromagnetic, and mechanical components and systems for the Aerospace and Defense industry.With over 50 years experience in avionics technology, our products are in service worldwide, performing flawlessly in military, civil, and commercial applications.FIRSTMARK is located in Durham in North Carolina, USA (RALEIGH/DURHAM/RESEARCH TRIANGLE PARK AREA). Our products have been designed and built for the most demanding ground, missile and aircraft applications for the last 50 years. They can be found on F18 Hornets, AV8B Harriers, C130 Hurcules, P-3 Orions to name but a few military platforms. Our civilian aircraft experience spans all of the Boeing commercial aircraft family.MissionOur business is building and repairing high-performance electromechanical products for the aerospace industry. We are dedicated to expanding our markets nationally and globally, where profitable and acceptable. We recognize our success is dependent upon our ability to provide consistent quality and value to our customers while providing a market return to our investors. We are committed to maintaining the highest principles in our exchange with customers, employees, investors, the environment, our community, and our global society. Our responsibility is to provide flawless products and exceptional services to the military, commercial, and commuter aerospace customers we serve. We will accomplish this goal through strategic planning, inventive techniques, and the application of cost-reducing and quality-enhancing technologies.Reference: NAICS -335312MIL-I-45208, MIL-Q-9858AS9100 IMPLEMENTATION IN PROCESS FJ ORLANDO & ASSOCIATES, INC. West Melbourne, FL 32904-3808
Contact name:
Fred Orlando
Phone: 321 258-9392 URL:
http://home.earthlink.net/~fjorlando/
Systems Engineering and Small Business Consultants FLC Machined Products Co. Inc. Rowley, MA 01969
Contact name:
Jeffrey P Carnevale
Phone: 978 948-7525 URL:
www.flcmachine.com
Manufacturing company , cnc machining,aerospace and commercial , 5 axis machining, coolrunners water cooled heatsinks Flexx System Co. Colorado Springs, CO 80907-3514
Contact name:
Nona Womack
Phone: 719 260-8409 URL:
http://www.flexxsystems.com
Floturn, Inc. Fairfield, OH 45014
Contact name:
Michael Chaney
Phone: 513 671-0210 URL:
www.floturn.com
Unique stainless steel metal spinning and flow forming for the aerospace, military, food, chemical processing and heavy equipment manufacturing industries. Metal spinning comes in many varieties and many different materials including both titanium and copper. FMI Aerostructures Valencia, CA 91355
Contact name:
Steven M. Wooten
Phone: 661 257-0231 URL:
www.forrestmachining.com
An Aerospace and Assembly Company. Foci Opto Encoders, Div. of Ruhle Co. Valhalla, NY 10595
Contact name:
D. GANDHI
Phone: 914 287-4071 URL:
www.ruhle.com
WE DESIGN AND MANUFACTURE OPTICAL ENCODERS FOR THE INDUSTRIAL,MILITARY AND AEROSPACE MARKETS. OUR FULL LINE OF PRODUCTS CONNSISTS OF THE FOLLOWING:1) INDUSTRIAL INCREMENTAL AND ABSOLUTE ENCODERS.2) HIGH RESOLUTION MILITARY ENCODERS.3) SPECIAL PURPOSE ENCODERS FOR THE MILITARY AND SPACE.4) ENCODED TORQUE MOTORS,FILM DRIVE SYSTEMS5) SOLID STATE LIMIT SWITCHES.6) SPECIAL PURPOSE CONTROL SYSTEMS. Forecast International Inc. Newtwon, CT 06470-1607
Contact name:
Monty Nebinger
Phone: 203 426-0800 URL:
www.forecast1.com
Forecast International is a Market Research and consulting Firm renowned as a leader in market intelligence and forecasting for the aerospace, defense, Electonics and power systems industries. Our full-time staff of distinguished analysts are unmatched worldwide for their expertise in our areas of study. We provide our clients with the most accurate, reliable and unbiased information in the most cost efficient manner and have been providing the world's intelligence communities with top level market intelligence for four decades. Forged Metals, Inc FONTANA, CA 92337-7204
Contact name:
JOHN GILL
Phone: 909 350-9260 URL:
WWW.FORGEMAN.COM
Manufacturer of Seamless Ring Forgings primarily for the Aerospace Industry. Formation, Inc. Moorestown, NJ 08057-1365
Contact name:
Doug Crawford
Phone: 856 234-5020 URL:
www.formation.com
Formation provides a broad range of products and services to the aerospace, data communications, defense and transportation industries, including ruggedized disk products, avionics-class servers and mobile gateway/router/firewall equipment. Formation also provides the fully synchronized Advanced Integrated Recorder system for air traffic control, defense and intelligence applications. The company has been in business since 1970. Fort Wayne Metals Research Products Corporation Fort Wayne, IN 46809
Contact name:
Kristopher Keys
Phone: 260 918-3743 URL:
www.fwmspecialty.com
Fort Wayne Metals, a raw material supplier, produces high-quality precision wire for miltitary,
aerospace, medical and dental industry. Capabilities include sizes from 0.0005 to 0.394 inches in DFT, titanium, precious and super alloys, Nitinol and stainless steel materials. The company fabricates product into round,flat,and shaped wire, and strands and cables by coils spools, or straight and cut lengths. Foster Engineering, Inc. Dyersville, IA 52040
Contact name:
Juli Foster
Phone: 563 875-6367 URL:
www.Precision-CNC-Machining.com
For over 25 years, Foster Engineering has been specializing in precision CNC machining. At Foster Engineering, quality workmanship at reasonable prices, where the customer's needs always come first is the first priority. Although we are a small company, we strive to stay on the leading edge of technology by constantly upgrading our equipment and computer assisted systems. By doing this, we give our customers an edge over their competition by reducing costs and cutting lead times. Foster Engineering's goal is to maximize efficiency through technology and minimize costs to its customers. We believe this helps build a stronger working relationship through teamwork in theses areas. Please explore our website and find out more about how Foster Engineering can be the company that meets your precision CNC machining needs Frank Products, Inc Belgrade, MT 59714
Contact name:
nancy
Phone: 406 388-6666 URL:
www.frank-products.com
small company that machines parts from plastics and metals, cage code 19998, work to MILSTD-45208A, in business since 1956, CNC machining,CNC milling and CNC turning,grinding,tapping,etcaerospace/defense, commercial and medical markets frank products.inc. Gallatin Gateway, MT 59730-8609
Contact name:
nancy mcmorrow
Phone: 406 388-6666 URL:
www.frank-products.com
cnc precision machining of all plastics and metals. Have been in business since 1956; work to mil-std 40280A. Most of our work is in the aerospace/defense, medical, commercial, and recreational fields. Frontier Bolt, Inc. LAKEWOOD, CO 80214-5379
Contact name:
Patricia Burnham
Phone: 800 669-4841 URL:
frontierbolt.net
Fastener Distributor Futek Advanced Sensor Technology Irvine, CA 92618
Contact name:
Shu Fan
Phone: 949 465-0900x17 URL:
http://www.futek.com
Located in Irvine, Southern California, FUTEK Advanced Sensor Technology is a world leading manufacturer of Load Cells, Force, Torque, Pressure Sensors / Transducers and related instrumentation, such as Signal Conditioner and Analog / Digital Displays. Products are sold to multiple industries, including Automation (Robotics), Computer, Medical, Aerospace, Material Handling and Testing.Since its inception in 1989, FUTEK Advanced Sensor Technology has demonstrated steady growth and built a solid reputation in both the USA and the many overseas markets. Customers find our winning formula attractive and recognize the benefits of our high quality products and services. Futron Corporation Bethesda, MD 20814-3202
Contact name:
Mr Joseph Fuller, Jr.
Phone: 301 913-9372 URL:
www.futron.com
Futron applies analytically rigorous decision-support methods to transform data into information. We collaborate closely with clients to relate decisions to future outcomes and measures of value. Our aerospace consulting services include market and industry analyses, safety and risk management, and communications and information management. The Futron vision and commitment to innovation, quality and excellence result in a higher performing future for clients.Futron enhances its clients ability to understand and make complex decisions. Using its innovative analytic methods, models, and in-depth data repository, Futron generates valuable intelligence in a world of risk and uncertainty. Consulting services include market and industry analyses, safety and risk management, and communications and information management. Futron's commitment to quality, excellence and value results in superior performance for clients. Future Machine Products, Inc. Ontario, CA 91761
Contact name:
Tory Delgadillo
Phone: 909 605-6880 URL: We are a full service machine shop specializing in long bed machining. Our quality system is compliant to AS 9100. Our capacity is from 8 foot by 48 foot by 27 inches high and from 36 inches by 70 foot 36 inches high. All of our machines are CNC 3 axis from single spindle to three spindle. We have a total of 10 machines. Future Machine Products Inc. has been provider of quality aerospace products for over 25 years and would be pleased to service your procurement requirements. G & H Aerospace, Inc. SCOTTSDALE, AZ 85260-2406
Contact name:
Terry Glass
Phone: 480 951-5800 URL:
G Atkinson Design Professional Mississauga, On L5N 6B8
Contact name:
Wendy Atkinson
Phone: 905 858-9638 URL:
www.gadp.com
We are full service product design and development consultants specializing in CAD (Pro/ENGINEER, AutoCAD and SolidWorks). With over 30 years of industry experience in mechanical design including automotive, aerospace, injection molding, heavy machinery and robotics. G K D-U S A, Inc. Cambridge, MD 21613-9401
Contact name:
J David Carduff
Phone: 410 221-0542 URL:
http://www.gkdusa.com
Technical weaving mill of precision filtration media and specialty process conveyor belts. Also produce woven metal fabrics for architectural and design use, including building facades and blast deflection screens. Woven filtration media is available to single digit micron ratings. Weaves include plain, dutch, and reverse dutch weaves among others. Weaving capbilities are precise. Food, beverage, chemical, aerospace, minerals, and many more industries are served. Wind tunnel screens and specialty filter leaves and elements are also producedConveyor belts of stainless steel and synthetic materials are used for continuous filtration, thermal operations, transport, collection, and pressing. The self tracking Trackmatic belts are a unique, durable, and long lasting workhorse in the GKD line up.The GKDMetalFabrics line of architectural products have been used for their aesthetics and longevity, but have found applications in security, protection, safety, sun shading, and even blast containment. Parking structures are easily covered in a rolled down facade for security and safety, while the open area allows for continuous air flow. Many applications. G T Products, Inc. Grapevine, TX 76051
Contact name:
Cary Mellema
Phone: 817 481-7113 URL:
www.gtproducts.com
Silicone Caulk (All different Colors)Silicone Mold Making RubberSilicone Waterproofing SystemsSilicone GelsSilicone Potting CompoundsSilicone Masonary Water RepellentsSilicone Fabric CoatingsUrethane CoatingsUrethane Rubber and Rigid UrethanesUrethane Foams G&S MACHINE INC
BEDFORD, TX 76021-5208
Contact name:
CAROLYN SMITH
Phone: URL: Manufacturing facility for the aerospace industry since 1968. G. B. & G. Die & Gasket Co., Inc. New Orleans, LA 70130-5026
Contact name:
Gerard Gegenheimer
Phone: 504 522-9613 URL:
http://www.gbggasket.com
GB&G is a privately held and owned corporation located in New Orleans, LA and houses 46,000 square feet of warehouse and office space. GB&G employs 31 full-time employees and president, Todd Bourgeois, attributes the company's success to ""our quality people, excellent service and our continued training programs."" GB&G has over $1 million of stock in our warehouse. Being a distributor for major manufacturers, GB&G can provide you with quality products in a timely manner and will customize to your specifications.GB&G is an industrial supplier of Hose, Couplings, V-Belts, Belting, Custom Cut Gaskets, Gasket Material, Dies, Metal Gaskets, Compression Packing, Expansion Joints, Extrusions, Fendering, O-rings, Felt, Sponge, Adhesive-Back Sponge, O-Rings, Tubing and more. Industries and businesses that rely on our products and services include: Aerospace, Casinos, Construction, Food/Restaurant, Hospital, Hotel/Motel, Marine, Office Buildings, Petrochemical, Power, Pulp & Paper, School, Ship Building, Transportation and more. Contact us by phone: (504)522-9613, fax: (504)588-9912, email: sales@gbggasket.com or visit our web site at www.gbggasket.com. G. S. Precision, Inc BRATTLEBORO, VT 05301-3642
Contact name:
Dave Munday
Phone: 802 257-5200 URL:
GSPRECISION.COM
G.S.PRECISION, MANUFACTURES HIGH PRECISION SMALL COMPONENTS AND ASSEMBLIES FOR AEROSPACE, AUTOMOTIVE, COMPUTER, ELECTRONICS, MEDICAL, INSTRUMENTATION AND OTHER INDUSTRIES. OUR SHOP IS A MODERN FACILITY OFFERING SOME OF THE MOST ADVANCED SWISS SCREW MACHINES/ CNC MACHINING AND MEASURING EQUIPMENT AVAILABLE. WE HAVE FULLY DOCUMENTED SPC SYSTEM. GSP IS ISO 9000:2002 COMPANY. G.W. Lisk Co., Inc. CLIFTON SPRINGS, NY 14432-1195
Contact name:
CONSTANCE STRUB
Phone: 315 462-4460 URL:
www.gwlisk.com
Small Business designer and manufacturer of linear and rotary solenoids, valves, linear variable
differential transducers, and flame arrestors. Our products can be found in commercial, aerospace, military, automotive, and industrial applications. We take pride in our custom design and manufacturing capabilities and own state of the art manufacturing, test, and measuring equipment. Gage Bilt Products Corp. Warren, MI 48088
Contact name:
Bruce Godfrey
Phone: 586 7717664 URL:
http://www.gagebilt.com
Gage Bilt has been supplying high quality, hih production riveting tools to commercial and aerospace industries for over 45 years. We have a full range of blind rivet and lockbolt installation systems to install Pop, Huck,Allfast, Cherry and other fasteners.Our products provide unique ergonomic advantages. They include a wide range of in-line, offset and right angle equiptment for the most challenging applications. Garcia Industries Inc. Santa Fe Springs, CA 90670
Contact name:
Larry Garcia
Phone: 562 906-9797 URL: Precision C.N.C machining, General machine work Gavial Engineering & Manufacturing, Inc. Santa Maria, CA 93455
Contact name:
CHRIS MULLER
Phone: 805 614-0060 URL:
www.gavial.com
Gavial is an integrator of highly-specialized packages for aerospace applications. By combining skills in machining, electronics, joining, and assembly, the company is able to construct highreliability fabrications for aerospace in small quantities. Examples of our work include ground support assemblies, cable assemblies, and control panels. We can fabricate prototypes and small quantities, on a build-to-print basis, using the most exacting quality standards. Just hand us the prints, we'll do the rest! GB TECH INC Houston, TX 77058
Contact name:
GALE E BURKETT
Phone: 281 333 3703 URL:
HTTP://www.gbtech.net
GB Tech, Inc., is a full service engineeriing and information technology services company with more than 350 employees across the nation. Specific areas of support include: Engineering Analysis, Hardware Design & Development, System Integration & Testing, Software
Development/Verification & Validation, Payload Integration, Laboratory Technical Services, Logistics Support Service, Remote Sensing, Desktop Application Development and Staff Augmentation GE Druck New Fairfield, CT 06812
Contact name:
Lisa Hickey
Phone: 203 746-0400 URL:
www.pressure.com
GE Druck a part of the GE Infrastructure Sensing business is an industry leader in the manufacturing of a range of pressure transducers and transmitters, which are used in multitude of applications and measure pressures from less than 0.015 psi to a high degree of accuracy in the most demanding environments. This range includes relatively low cost OEM devices to very high accuracy resonant silicon barometric sensors. Major sectors include aerospace, water, gas, petrochemical and transportation, with applications ranging from offshore oil platforms to Formula One (F1) racing cars.The range of portable field calibrators extends from basic instruments to some of the most accurate and intelligent pressure and temperature calibrators in the world. GE Ruska produce primary pneumatic and hydraulic pressure standards from 0.003 psi through to 72,500 psi. These are non-electronic calibrators and are often used for calibrating electronic secondary standard instruments. The fast response secondary electronic controllers use both silicon and fused quartz sensors giving an accuracy of 0.003% FS. These instruments are used in both production environments and standards rooms.In addition, GE Druck has a range of Air Data Test Sets, which are used to calibrate aircraft pitot static instruments from helicopters to supersonic fighters. GE Sensing & Inspection Technologies Billerica, MA 01821
Contact name:
Lynne W. Cybulak
Phone: 978 437-1736 URL:
www.gesensinginspection.com
GE Sensing & Inspection Technologies provides precision sensor-based products for measuring temperature, pressure, liquid level, humidity, gas concentration, and flow rate. We also design, manufacture and service ultrasonic, remote visual inspection, radiographic and eddy current equipment and systems that inspect, monitor and test materials and equipment without disassembling, deforming or damaging them.We deliver specialized solutions for applications in the aerospace, power generation, oil and gas, automotive and healthcare industries. GEAR Software, Inc Jupiter-Tequesta, FL 33469
Contact name:
Sam Plummer
Phone: 561 575-4327 URL:
www.gearsoftware.com
GEAR Software has developed standard-setting DVD and CD recording software products for UNIX, Linux, Windows and Mac since 1986. The company creates robust and reliable multiplatform recording solutions that support SUN Solaris, Trusted Solaris, IBM AIX, HP-UX, Windows, and Linux operating systems. GEAR's software solutions are compatible with the full
range of DVD and CD recorders, tape drives and jukeboxes. The software is the ideal tool for archiving digital data such as audio, data, video and other mission critical information to CD or DVD disc. GEAR is also a leading provider of software developer tools (GEARWorks SDK). This powerful developer's library enables software development companies to integrate optical recording technology into their own products. ""GEAR-powered"" CD and DVD recording technology, via the GEARWorks SDK, is integrated in a variety of software products for data storage, consumer audio, digital imaging, on-line entertainment, publishing, medical imaging, and information security. GEAR's software technology for DVD and CD recording has also been proven for use in embedded applications under Linux and Windows.GEAR Software is a member of the Aerospace Industries Association, The Navy League of the United States, the DVD Forum and various other industry groups in the software development arena. General Test Laboratory, Inc., A Div. of Wyle Labs Santa Clara, CA 95054
Contact name:
Mary Jo Marchman
Phone: 408 764-5522 URL:
www.generaltestlab.com
Offer component level testing for commercial, military, and aerospace applications. Electrical, environmental and mechanical testing or qualification performed per customer application or MILSTD and JEDEC specifications. Genesis Enterprises, Inc Brazil, IN 47834
Contact name:
Terry Wilkison
Phone: 812 446-2665 URL: Genesis Enterprises, Inc. provides a wide range of quality commercial vacuum heat treating processes, including annealing, stress relieving, precipitation/age harding, tempering, vacuum brazing, sintering and harding. Our market includes the following industries: aerospace, automotive, medical suppliers and industrial equipment. Genesis Enterprises offers our unique expertise and dedication to delivering a quality product and service on time at optitmum cost. Genitest inc. - Laboratory Division Montreal, Qu H2K 3A5
Contact name:
Jean Lavoie
Phone: 514 526-8378 URL:
www.genitest.com
Genitest is a metallurgical testing laboratory for the aerospace/aircraft industry (since 1989). Genitest is accredited by Defence Logistics Agency (CCR -DOD) and is registered by CGRP in accordance with the Defence Production Act. Other certifications includes Rolls-Royce, Pratt & Whitney, United Technologies, Messier-Dowty, Heroux-Devtek,... Geodetic Systems Inc Melbourne, FL 32901
Contact name:
Gary Johanning
Phone: 321 724-6831 URL:
www.geodetic.com
Geodetic Systems, Inc. (GSI) is an international supplier of industrial photogrammetry solutions for the industrial measurement/metrology marketplace. GSI develops and markets the V-STARS family of 3D coordinate measurement systems for users involved in measurement and inspection applications in diverse industries such as aerospace, power generation, automotive and shipbuilding. INCA3, the company s flagship product, is a state-of-the-art digital photogrammetry camera with many progressive features. GSI distributes its products via a worldwide network of industry partners. Founded in 1977, the privately-held company is located in Melbourne, Florida. Georgia Aerospace Systems Manufacturing Inc. Atlanta, GA 30303-2509
Contact name:
Alvin Harper
Phone: 404 221-1780 URL:
georgiaaerospace.com
Composite structures for aircraft and marine applications.Materials for stealth aircraft, submarine and vehicles with reduced signature. Low observable technology.Sensors for Homeland security applications.Fiber Optic Guided Missile Technology.Autoclave Cured Composite Structures. Geotek Folsom, CA 95630
Contact name:
Geotek
Phone: 916 351-0965 URL: Aerospace Manufacturing Geotest - Marvin Test Systems, Inc. Irvine, CA 92614-5846
Contact name:
Gretchen Adin
Phone: 949 263-2222 URL:
www.geotestinc.com
A subsidiary of the Marvin Group (Inglewood, CA) Geotest –Marvin Test Systems, Inc. is a global supplier of PXI and PC-based test products, systems, and solutions. Founded in 1988, Geotest offers hundreds of PXI and PC-Based test products including test instrumentation, instrument controllers, test development software, turnkey test systems, and obsolescence replacement products. Geotest's off-the-shelf products include state-of-the-art software and hardware for the test and measurement market such as ATEasy®, the leading software development environment for A.T.E. applications; GX7000, a 6U, 20 slots PXI chassis, a broad range of 3U and 6U PXI test instruments, GTXI®, Geotest's innovative 14-slot test instrument controller with support for PCI, ISA, PXI, and CPCI instruments; and DIO®, the world's fastest PC-based digital I/O. Geotest’s products and systems are used worldwide in thousands of aerospace, semiconductors, communications, medical, industrial, and military test applications. Gerhardt Gear Co. Inc.
Burbank, CA 91502
Contact name:
R J GERHARDT
Phone: 818 842-6700 URL:
www.gerhardtgear.com
Gerhardt Gear Co. is a custom gear and precision parts manufacture with over 45 years of experience.We manufacture a wide range of custom gears, splines and serrations from 3/16"" to 38"" diameter, and from 3 pitch to 200 pitch. We also cut a full range of metric gears,splines and serrations all to aerospace standars. Gforce Aerospace, LLC LAS VEGAS, NV 89123
Contact name:
Dag
Phone: 702 808-3866 URL:
www.gforceaerospace.com
Repair and Overhaul Material for the following Aircraft 737-200, 737-NG, 747-Various, C130, C141, C5, L1011, GGI International Lachine, Qu H8T 3J1
Contact name:
Melissa Guyot
Phone: 514 631-6662 URL:
www.ggi-international.com
GGI International is a global leader in the design, engineering and manufacture of User Interface Assemblies including membrane switches and keypads, silicone rubber, touch screen assemblies, PCB keypad assemblies and graphic overlays. GGI is active in virtually every sector of the marketplace where a product requires a user-interface, some industries include Medical, Military/Aerospace, Point-of-Sale, Telecom and Industrial Controls.GGI is RoHS and ESD 20.20 compliant as well as ISO 9001:2000 and C-TPAT certified. As one of the first in its industry to have obtained ISO 9001:2000 certification, GGI focuses on the quality and reliability of their products with the goal of consistently meeting and exceeding clients' expectations. GGI remains on top of the industry in terms of innovation by being the exclusive Canadian licensee of Duraswitch technologies, which has allowed GGI to manufacture, market and distribute such next generation switch technologies as PushGate, High-Impact PushGate, thiNcoder RT and MagnaMouse to the world market. Ginn Consulting Group, Inc. Friendswood, TX 77546-6134
Contact name:
T. Walter Ginn
Phone: 281 996-0049 URL:
www.ginnconsulting.com
Ginn Consulting Group, Inc. provides program and project management consultation services to aviation and aerospace industries, governmental agencies and private businesses. The company is a certified SDB by the Small Business Administration. Our team members possess years of
experience in disciplines including aviation and aerospace management, operations and safety, EPA and OSHA regulatory compliance, information technology, business process improvement, and legislative and policy issues. Global Machine Works, Inc. Arlington, WA 98223-7821
Contact name:
Dan Bellman
Phone: 360 403-8432 URL: Global Machine Works, Inc., is a contract manufacturer of high quality, precision-machined parts and assemblies serving the aerospace and medical industry throughout the United States and Canada. Our manufacturing capability ranges from small to large complex products produced from plastics, stainless steel, heat-treatable alloys, ferrous and non-ferrous materials, and titanium. Please contact us at your convenience if you have any questions about our organization.We invite you to tour our facility and look forward to the opportunity in assisting you with your manufacturing requirements. Glotrax Polymers Inc. Warkworth, ON K0K 3K0
Contact name:
Nancy Glover
Phone: 905 344-1166 URL:
www.glotrax.com
GPI supplies a variety of high performance resins and specialty chemicals for industries ranging from electronics to aerospace. In addition to the standard line of unique materials for custom applications that have been developed by our Technology, Service and Development Group, GPI is proud to represent Magnolia Plastics and Permabond products. GM Nameplate Seattle, WA 98119
Contact name:
Benjamin Gorenberg
Phone: 206 284-2200 URL:
www.gmnameplate.com
Established in 1954, GM Nameplate manufactures product identification components, electronic input devices and large format digital graphics.As a custom manufacturer, GM Nameplate's production capabilities encompass a wide range of processes: injection and compression molding, laser cutting, engraving and plastic decorating, for the aerospace, medical, automotive and appliance industries. GM Nameplate also designs and engineers entire interface constructions: keyboards, touch screens, elastomeric keypads, PCB, lighting, subpanels and surrounding bezels. Other products include precision die-cut components, injection-molded components and EMI/ESD shielding. GM Nameplate is ISO 9001, QS 9000 and Boeing D1-9000 certified and maintains UL, CSA and MIL-Spec standards.The company employs 1,000 and owns and operates eight manufacturing facilities in California, North Carolina, Oregon, Washington (2), Canada, China and Singapore. Corporate headquarters are in Seattle, Wash. GMT Composites, Inc Bristol, RI 02809-2728
Contact name:
DAVID SCHWARTZ
Phone: 401 253-8802 URL:
http://www.gmtcomposites.com/
Builder of advanced carbon fiber composite parts and structures. Goldenwest Mfg., Inc. Grass Valley, CA 95945
Contact name:
Cliff Stewart
Phone: 530 272 URL: goldenwestmfg.com We sell Machinable Plastic Boards,RTV Silicone Rubber, Foam Boards,Urethane Casting Resins, Fillers. Gooch & Housego Melbourne, FL 32934-9296
Contact name:
Niki Phelps
Phone: +441460 256457 URL:
www.goochandhousego.com
Gooch & Housego the components & materials division of Gooch & Housego PLC a global technology business supplying state of the art photonic products into the Aerospace & Defence, Industrial & Research and Biomedical & Life Sciences market sectors. G&H manufacture Acousto-Optics, Electro-Optics, Fiber-Optics, & Precision Optical Components & Sub Systems, combined with Materials Engineering, Crystal Growth, Polishing & Coating capabilities. GORKO INDUSTRIES, INC. North Hills, CA 91343-6108
Contact name:
LIDIA GORKO
Phone: 818 894-8801 URL:
http://www.gorkoind.com
Contract manufacturer of medium to high complexity detail components and assemblies per OEM's & government drawings and specifications, for customers in aerospace, aircraft, medical, telecommunication, automotive, energy, automation and other industries. Materials used: metals, precious metals, exotics, plastics, composites. Gorla Consultants Inc. STRONGSVILLE, OH 44149-1514
Contact name:
Rama Gorla
Phone: 440 243-1180 URL: Gorla Consultants Inc. was incorporated in the state of Ohio on February 24, 1999. It is a
company organized to exploit the aerospace engineering research and development and software development market. The company was founded by Mrs. Vijaya Gorla and is a socially and economically disadvantaged woman-owned small business. Gorla Consultants Inc. has the computer software for CFD and structural finite element analysis as well as probabilistic analysis. GOVERNMENT CONTRACTING ASSIST Huntington Beach, CA 92649-1050
Contact name:
Ian Hendricks
Phone: 714 379-4911 URL:
www.gcalabels.com
Barcode labels,barcode printers, barcode software, scanning equipment and supplies, especially for Aerospace Industry Government Contracting Assistance Huntington Beach, CA 92649
Contact name:
JULIA GRABEL
Phone: 714 379-4911 URL:
www.gcalabels.com
Military and Aerospace product and shipment marking specialists - Bar Codes, RFID, custom labels and tags. One stop resource for printers, labelstock, media, scanners, software. Unequalled expertise in compliance marking specifications and mandates. gp:50 Grand Island, NY 14072-1223
Contact name:
Joseph Less
Phone: 716 773-9300 URL:
www.gp50.com
Manufacturer of pressure and temperature transducers & transmitters for all applications from industrial through aerospace including 'S' class models gp50 ny ltd GRAND ISLAND, NY 14072-1223
Contact name:
jeff gruszka
Phone: 716 773-9300 URL:
www.gp50.com
GP:50 Designs and Manufactures Aerospace Transducers forSpace,Flight Qualified and Ground support programs. GRA, Incorporated Jenkintown, PA 19046-2094
Contact name:
Cynthia Jones
Phone: 215 884-7500 URL:
www.gra-inc.com
GRA was founded in 1972 and specializes in strategic advice and financial analysis related to transportation. The firm has played a leading role in helping shape important airline industry developments including deregulation, privatization and international consolidaation within the airline industry. The firm has also played a prominent role in modernizing the regulatory framework for the air transportation industry, and is now the chief economic counsel to the Federal Aviation Administration.GRA's headquarters are in suburban Philadelphia with an affiliate office in New York. Grace Aerospace, Inc. FORT WORTH, TX 76109
Contact name:
Clifton Grace
Phone: 817 732-3541 URL:
www.graceaero.com
Grand Valley Manufacturing Company Titusville, PA 16354-1661
Contact name:
David Ewing
Phone: 814 827-2707 URL:
www.gvmco.com
Grand Valley Mfg. Co is a job shop machining company with four (4) plant locations in Pennsylvania. GVM Co. specializes in deep hole drilling and boring, CNC lathe turning and CNC milling of parts up to 150 tons in weight. GVM also specializes in the machining of long parts, some exceeding 60 feet in length.GVM provides services for Aerospace, Off-Shore Oil and Gas Drilling and Production platforms, Steel and Special Metals Production, Naval vessels and Defense applications, Paper Production Equipment, Construction equipment, AND Naval and Commercial Nuclear equipment. Grant Riveters Bridgeport, CT 06605
Contact name:
Bruce McNaughton
Phone: 203 366-4557 URL:
http://www.grantriveters.com
Manufactures of Multi-process Orbital Riveters. We specialize in Orbital Forming, Twin Spin Roller Radial Forming, Multi-Spin Roller Radial Forming, Spin-Press Flow Forming, Impact Fastening,and Squeeze Riveting. We offer proto-typing and riveting services for single piece to large production runs. Our machine's carry an two and three year warranty. Our machines are operated by pneumatic, hydraulic or servo-electric actuation. Support Power Head, Bench Top, Double-Ended Horizontal and automated work cell riveting systems. Gravitas Digital Solutions, Inc. Orlando, FL 32828-8278
Contact name:
Alex Longo
Phone: 407 482-3854 URL:
www.gds-inc.com
Gravitas Digital Solutions (GDS), Inc. is an aerospace and information technology (IT) firm located in Orlando, Florida. The staff at GDS, Inc. has over 12 years of project management, systems management,and software development experience in the aerospace and IT markets. We have experience with the top DOD corporations such as General Electric Aerospace, Lockheed Martin, Harris, Raytheon, General Dynamics, and ITT Industries. GRAY TECHNOLOGIES, INC. Bel Air, MD 21014
Contact name:
MARK A. GRAY
Phone: 410 937-0497 URL:
www.graytechnologies.com
Gray Technologies, Inc., established in 1992, specializes in the development of software and electronics for high-performance real-time embedded computing systems. Applications include military, aerospace, homeland security, and commercial systems. The company operates as a small group of engineering consultants working under non-disclosure agreements and time and material purchase orders from prime contractors or their subcontractors. Gray Technologies offers its customers various levels of support across all phases and most disciplines in the systems development process. The company provides services in the following engineering disciplines: systems engineering, software engineering, signal processing algorithm development, electrical engineering, mechanical engineering, system integration and testing, and enginerring project management. We will work on your site or ours. We can provide references at your request. Our labor rates are competitive. Please call or email. GRAYBAR ELECTRIC COMPANY INC Saint Louis, MO 63105
Contact name:
Jeffrey M. Cook
Phone: 314 573-9362 URL:
www.graybar.com
Graybar, the nation's largest distributor of Electrical and Comm/Data products,established in 1869 is headquartered in St. Louis, Missouri and is represented by over 9,500 employee owners. Graybar provides products and services from over 4,000 manufacturers to our customers through 290 stocking locations and 16 national & regional distribtution centers. Graybar services multiple markets including Government (Federal & State), Automotive, Petro-Chem, Hospitals, OEM, Metals, Construction, Utility, Aerospace and Communications. Graybar is registered under ISO9002. To learn more about Graybar, log onto www.graybar.com and join the thousands of satisfied customers we are proudly serving. Griffon Aerospace, Inc. Huntsville, AL 35806
Contact name:
Larry French
Phone: 256 859-3880 URL:
Guard Lee, Inc.
www.griffon-aerospace.com
Apopka, FL 32703
Contact name:
Thomas Wilkes
Phone: 407 886-7112 URL:
http://www.quard-lee.com
Space vehicle display replicas, models & prototypes Guard-Lee, Inc. Apopka, FL 32703-7730
Contact name:
Linda Little
Phone: 407 886-7112 URL:
www.guard-lee.com
trainers, simulators, full scale replicas of anything to do with aerospace Guest Associates, Inc. Huntsville, AL 35805
Contact name:
Michael C. Guest
Phone: 256 534-2487 URL:
www.guestassociates.com
<b>Guest Associates, Inc. (GAI)</b> was established in 1977 in order to provide technical consulting and business development services to a wide array of clients seeking business with the Department of Defense, NASA and other government agencies. Covering both national and international markets, GAI provides superior intelligence and market research for a fraction of the typical marketing costs. Guest Associates, Inc. is the '<b>Competitive Edge</b>' that our clients rely on in today's highly competitive business environment. Gulf Coast Stamping Fort Myers, FL 33905
Contact name:
Steve Spencer
Phone: 239 694-5900 URL: Specializing in short run metal stamping. Serving the Aerospace, Filtration and General Industrial markets since 1984. Experienced in Aluminum, Stainless Steel and Cold Rolled Steel. We continue to grow because of our innovative approach to customer service. If your organization has begun implementing the tools of Continuous Improvement, we are ready to support your efforts. Whether it is designing for manufacturability, using your sketches or CAD drawings, reacting to purchase orders, EDI releases or KANBAN signals, or developing custom stocking programs, we are trained to assist your staff. H & B Engineering CANOGA PARK, CA 91304-1518
Contact name:
MARJORIE BASHAW
Phone: 818 998-1566 URL:
www.handbengineering.com
PRODUCTION MACHINE SHOP WHICH SPECIALIZES IN CNC TURNING AND MILLING. CURRENT CUSTOMERS ARE FROM THE AEROSPACE, DEFENSE AND AUTOMOTIVE INDUSTRIES. H. M. Dunn Company, Inc. Euless, TX 76040-2001
Contact name:
Danny Grounds
Phone: 817 283-3722 URL:
hmdunn.com
Engineering and manufacturing machine shop with a diverse assortment of 3, 4,5 and 6-axis CNC machines. Specialize in aerospace industry close tolerance machining of aluminum, steel, titanium, casting, forging and plastic. Military and commercial parts and assemblies, complex contoured surfaces and tool design. Manufacture jigs, fixtures and contour molds. Hades Mfg. Corp. Farmingdale, NY 11735
Contact name:
Eugene Brand
Phone: 631 249-4244 URL:
www.hadesmfgcorp.com
Aircraft and aerospace thermocouple signal conditioning amplifiers, thermocouple reference junctions, multiplexers. thermocouple probes, etc. Hamar Laser Instruments, Inc. Danbury, CT 06810-7322
Contact name:
ROD HAMAR
Phone: 203 730-4600 URL:
www.hamarlaser.com
HLI is a US-based leader in laser alignment technology, for such applications as: machine tool (mills, grinders, VTLs and lathes) alignment, aerospace jig alignment, laser leveling, shaft alignment, bore alignment (stern tubes, drive shaft bearings and turbines), roll alignment, plastics processing equipment alignment (extruders, injection molding) and many more. We also offer laser alignment services. For over 36 years, we have offered the latest in laser alignment technology with automatically rotating laser planes that are the most accurate in the world. Hamill Manufacturing TRAFFORD, PA 15085
Contact name:
John S Dalrymple
Phone: 724 744-2131 URL:
www.hamillmfg.com
Hamill specializes in precision machining , welding and fabricating of complex components from difficult-to-machine metals such as Inconel, stainless steel and titanium to aluminum and plastic.
Currently serving the naval and commercial nuclear programs, power generation, aerospace, semiconductor, glass and plastic mold industries and numerous other quality conscious customers. Over 48 years of precision manufacturing experience. Qualified to NAVSEA 2501500-1 , MIL-STD-278, SNT-TC-1A, AWS D1.1, MIL-I-45208/ISR-1, MIL-Q-9858/QRC-82, and ISO 9002 Compliant HARDWARE SPECIALTY CO., INC Long Island City, NY 11101-1994
Contact name:
Steven Boush
Phone: 508 481-8622 URL:
www.hardwarespecialty.com
International Dist. Of Fasteners & Electronic Hardware. Screws, Nuts, Bolts, Washers, Screw Machine Products, Spacers, Standoffs, Terminals, Captive Fasteners, Cable Ties, Latches, Handles, Plastic & Metal PCB Hardware, LED Assemblies, Heat Sinks, Thermal Management, Labels, Tubing, Fuses. All Metals, Standards, Specials, Inch & Metric. Value-Added Services Including: Kitting, Bar-Coding & Scanning, Cut Tubing, Custom Labels, Hot Stamp Marking, Assemblies, EDI, Managed Inventory Programs & In-Plant Warehousing. To The Commercial, Electronic, Military & Aerospace OEM Markets. ISO 9001 Registered. Full-Service Quality Assurance Facilities. Hardy Engineering & Manufacturing Auburn, WA 98002
Contact name:
Gay Hardy
Phone: 253 735-6488 URL:
www.hardyem.com
Fabrication, engineering, fine machining, and manufacturing company. Boeing certified. Expert Craftsmen. Professional Engineers on staff. Full time Quality Inspection. 17,000 ft2 facility. 22' x 13' pass through doors. Custom machine design and fabrication. Prototyping. Dedicated to Quality and Timeliness of our customers parts and requirements Hardy Engineering and Manufacturing Auburn, WA 98002
Contact name:
Gay E. Hardy
Phone: 253 735-6488 URL:
hardyem.com
Custom Manufacturing and Engineering Machine Design and Build Prototyping & Retrofit of new and existing machines Tooling CNC Mills and CNC Lathes Expert CraftsmenHardy Engineering & Manufacturing is located in Auburn, Washington and specializes in precision machining, fabrication, and assembly. Our facility is a company owned 18,000 square foot building with 24 foot ceilings and 22 x13 pass-through shop doors. The precision parts, hardware and specialized machines we manufacture are typically used in commercial manufacturing, aerospace/defense tooling, medical/research processes, and prototype development. We have Professional Engineers on our staff. Harold S Haller & Company Cleveland, OH 44116
Contact name:
Gail G. Haller
Phone: 440 895-0775 URL:
www.haroldhaller.com
Harold S Haller & Company provides consulting services to clients in the areas of total quality management, process and product improvement, implementation of Six Sigma methods for breakthroughs, training and implementation of analytical trouble shooting methods, and software for use in Six Sigma projects like design and analysis of experiments, process modeling, variation reduction, and process control. HART Enterprises, Inc. Draper, UT 84020
Contact name:
James H. Hartman, Ph.D.
Phone: 801 495-3007 URL:
http://www.hartenterprisesinc.com
EXPERTISE15+ YEARS EXPERIENCE IN THE EDUCATIONAL / BIOTECHNOLOGY FIELDS, INCLUDING VIROLOGY, MOLECULAR BIOLOGY, MICROBIOLOGY, BIOCHEMISTRY, CHEMISTRY, INHALATION TOXICOLOGY, GENETIC TOXICOLOGY, SOMATIC CELL GENETICS, TRANS-DERMAL ABSORPTION KINETICS, ENVIRONMENTAL ENGINEERING.20+ YEARS EXPERIENCE IN THE NUCLEAR AND PROCESS ENGINEERING FIELDS, INCLUDING SETPOINT CALCULATIONS, INSTRUMENT LOOP UNCERTAINTY CALCULATIONS, MANAGEMENT, DESIGN, CONSTRUCTION, START-UP, INSTALLATION, TESTING, MODIFICATION OF INSTRUMENTATION AND CONTROL SYSTEMS, AND AEROSPACE GUIDANCE & CONTROL SYSTEMS. Hart Scientific Inc. American Fork, UT 84003-9715
Contact name:
Dallen Baugh
Phone: 801 763-1600 URL:
www.hartscientific.com
Hart manufactures temperature calibration and measurement equipment - liquid baths, dry-wells, thermometer readouts, temperature sensors. We also have a NVLAP accreditted temperature calibration laboratory. We offer the broadest line of temperature calibration and measurement equipment in the world. We supply national laboratories, government laboratories, corporate laboratories, and manufacturing facilities ranging from pharmaceuticals and biomedical to petroleum to aerospace. We offer the best in temperature metrology. Hartrun Corp. Saint Augustine, FL 32080
Contact name:
L. K. Hartmann
Phone: 904 471-5959 URL:
N/A
Manufacturer and developer of instrumentation for fatigue crack growth testing. Products sold worldwide to leading companies in the aerospace, industrial and academic research laboratories.
Trademarks: KRAK-GAGE and FRACTOMAT. Haskel International, Inc. Burbank, CA 91502-2027
Contact name:
Irma Aguilar
Phone: 818 556-2528 URL:
www.haskel.com
Haskel manufactures high pressure pneumatic driven, pumps, gas boosters, valves, accumulators, regulators, switches, receivers, components and systems for gas boosting/mixing and applications such as oxygen boosters and breathing air booster systems for pure breathing oxygen in fire and mine rescue . Oxygen booster units conform to MIL STD 1330D. Applications include liquid and gas pressure testing of hoses, valves, vessels, gas containers; helium leak detection, gas transfer, fluid power, boosting plant air pressure, CFC recovery/charging, SF6 recycling. HDL Research Lab, Inc. Brenham, TX 77833
Contact name:
Paula Imm
Phone: 979 836-2300 URL:
www.hdl.cc
Custom design, engineer and manufacture of high-reliability, severe-environment power converters for military and aerospace markets. Principle products include high/low voltage power systems, AC-DC and DC-DC converters, battery chargers. Small Business established 1978. Compliant to ISO-9001:2000, MIL-I-45208A. Capabilities from 2 Vdc to 25,000 Vdc and 100 microwatts to 1.5 KW. HDLs innovation and competence have received recognition throughout the industry. Experienced design teams employ CAE tools to design electronic componentscircuits, interactive tools to enhance design, CAD tools for engineering drawings. On-site fullyequipped environmental test facility supports clients needs. Heffernan Consulting Inc PALOS VERDES PENINSULA, CA 90274-3412
Contact name:
James Heffernan
Phone: 310 265-0477 URL:
www.heffernan.tv
EXPERTISE: Domestic and international project management, program management, supervision and engineering experience with the installation, operations and maintenance of systems and facilities for government and commercial applications including specialized experience with aerospace, police, military, university, utilities and oil/gas exploration/production business lines. Definition, design, procurement and migration plan of corporate telecommunications networks and systems to new multimedia PBX, call center and CTI platforms. Emergency 911 centers. SYSTEMS: PCM, FDM, CDM, T-carrier and CEPT (E-1) multiplex; earth stations, VSAT, TDMA, FDMA, CDMA, DAMA; mobile telephone, IMTS, AMPS, cellular, electronic switching systems, ESS, PBX, computer control, SCADA and TDM equipment; wideband, Frame Relay, ATM, SONET, SDH, microwave and fiber optics. NETWORKS: LAN, WAN, ETHERNET, Wireless, Broadband, FDDI CERTIFICATION: NARTE Certified Master Engineer with Master endorsements RF and non-RF emitting. LICENSE: Federal
Communications Commission (FCC) First Class/General Class Radiotelephone MEMBER: Consultant Programs: NORTEL, Lucent, MITEL, Avaya INTERNATIONAL ASSIGNMENTS: Czech Republic, Germany, Greenland, Guam, Hungary, India, Indonesia, Iran, Japan, Netherlands, Okinawa, Philippines, Saudi Arabia, Singapore, Taiwan, TurkeyPlanning & Implementation Broadband, Satellite, Wireless, 802.11, Wi-Fi Call Centers, PBX, CTI, Emergency 9-1-1 PSAPs Corporate Telecommunications Specialties Project Management Systems Engineering Telecon and Telephone Communications Fiber Optics Networks LAN/WAN - Other Microwave Hentzen Coatings, Inc. Milwaukee, WI 53218
Contact name:
Albert Hentzen
Phone: 414 353-4200 URL:
www.hentzen.com
Formulation and Manfuacture of OEM, Defense, Aerospace, and Specialty Liquid & Powder Coatings Heptner Manufacturing Co Tullytown, PA 19007
Contact name:
Barbara Heptner
Phone: 215 945-6615 URL:
no http://
Woman owned screw machine shop established in 1995 to manufacture various types fasteners including, but not limited to, screws, nuts, bolts, spacers, washers, pins, etc; special fasteners from print, sample or description, to Government and a variety of Commercial Industries (medical parts, automotive, aerospace, water filtration, hardware, etc.) Herley Industries, dba Herley Lancaster Lancaster, PA 17603-4092
Contact name:
Tammy Boston
Phone: 717 397-2777 URL:
www.HERLEY.COM
View Printable Version About Us For more than 40 years, Herley has been supplying solid, innovative, and sophisticated RF, microwave and millimeter wave components and subsystems to the defense and aerospace industries. Growing through internal expertise, strategic acquisitions, and alliances, Herley today offers a strong portfolio of products across the entire microwave spectrum. Evolving from a component supplier to a systems provider, we work closely with prime contractors, the U.S. government, and governments and militaries worldwide to provide a range of solutions for radars, flight instrumentation, weapons sensors, electronic warfare systems and guidance systems. A strong focus on product upgrades, R&D and new product development enables us to maintain technological leadership to the benefit of customers worldwide. In both engineering and production, we maintain state-of-the-art capabilities to ensure continued leadership and the ability to deliver on the increasingly complex and intelligent capabilities required for defense and aerospace applications. While our primary focus is defense and aerospace electronics, our technologies find us in commercial applications - particularly in the scientific and medical fields. Our expertise in pulsed and continuous-wave microwave
amplifiers and related technologies finds use in nuclear magnetic resonance and magnetic resonance imaging systems. In the international market, the Company has achieved a significant presence, with over 32% of its revenues coming from international customers in fiscal 2004. The Company expects this market to continue to grow, fueled in part by its membership in the MRCM marketing partnership and the acquisition of UK-based EW Simulation Technology, Ltd. Heston Precision Livermore, CA 94550-3853
Contact name:
Sandi
Phone: 925 606-7240 URL:
members.aol.com/hestonprecision/MachineShop.html
Production, Prototype, Precision Machined Parts, Fabricated to your specification.We offer a cooperative effort!For Machines/ Equipment for the Food IndustryFor Laser IndustryFor Construction IndustryFor the Department of Defense, Department of Energy, Over 25 years experience in machining various metals, plastics, graphite, etcetersA small, woman owned business since 1993. Hetra Secure Solutions Palm Bay, FL 32905
Contact name:
Michael Adamcheck
Phone: 321 953-3033 URL:
WWW.HETRASECURE.COM
HETRA Secure Solutions is a small business specializing in network systems solutions incorporating Open Architecture (PCI, cPCI, VME, SEME), TEMPEST Crypto and extreme environmental performance and survivability technologies (MILSTD-810, DO160) in support of military forces, intelligence agencies and prime contractors worldwide. HEXCEL SCHWEBEL Anderson, SC 29624
Contact name:
STEVE KOONCE
Phone: 864 260-3220 URL:
WWW.HEXCELSCHWEBEL.COM
Produces woven and non-woven fabrics from fiberglass, carbon, Kevlar, and other organic fibers for use in electronic PWB, aerospace and industrial composites, and ballistic protection products. Hextek Corporation Lightweight Optics Tucson, AZ 85719
Contact name:
Michael Voevodsky
Phone: 520 623-7647 URL:
www.hextek.com
Design and manufacture customized lightweight mirrors and substrates for telescope, laser, lab, metrology, air and space borne optical systems. Sizes up to 2500 mm in diameter, lightweighting to densities as low as 8 kg/sqr meter. Virtually any geometry possible. Flats, spheres, aspheres
and off-axis aspheres as fast as f/0.5. HI TEMP INSULATION INC Camarillo, CA 93012
Contact name:
Jim Roth
Phone: 805 484-2774 URL:
www.hi-tempinsulation.com
Hi-Temp Insulation Inc. provides the Aircraft, Missile and Space Industries with the most innovative designs and the very best products to solve thermal and acoustical problems. Specialists in metal foil, soft goods and sewn insulation designs; we have gained considerable experience by providing solutions for a variety of demanding applications. HI-TEC Associates, Inc. Lakeland, FL 33813
Contact name:
JOSEPH M. GONZALEZ, P.E.
Phone: 863 644-8200 URL:
www.hitecjobs.com
Contract Employment / Personnel Services: Specialists in the recruitment and placement of the following personnel: engineering, technical, aerospace, manufacturing, information systems / technology, computer support services, systems design & integration, administrative / clerical and light industrial personnel. Hi-Tech Mold & Tool, Inc. Pittsfield, MA 01201
Contact name:
Ann Fyfe
Phone: 413 443-9184 URL:
www.hitechmoldtool.com
Hi-Tech is a full service custom injection molder of plastic and silicon servicing the Aerospace, Medical, Elevator, Automotive and Automotive Aftermarket, Consumer, and Electrical markets. We process parts in PEEK, PEKK, PEI, PAI, PPS, PBT, PVC, ABS, PC, PA, TPE, TPO, TPU, and many other engineering grades. We offer a full range of secondary services including assembly,decorating, sonic welding, heat staking, annealing, testing, and more. Hobart Institute of Welding Technology Troy, OH 45373
Contact name:
Brenda K. Scott
Phone: 937 332-5000 URL:
www.welding.org
Hobart Institute of Welding Technology s staff of seasoned professionals offers you advanced training in all major welding processes. Services include skill-development courses for the new student, as well as certifications and/or technical training for welders looking to enhance their skills. Customized training for your corporate welding needs is available on- or off-site. A wide selection of world-class welding training and educational materials are available for training or
reference use. Hobart Institute of Welding Technology is a 501(c)3, nonprofit organization dedicated to excellence in welding education. Hoefner Corporation So. El Monte, CA 91733-1777
Contact name:
Jerry Hoefner
Phone: 626 443-3258 URL: Hoefner Corporation is an aerospace job shop which has been in business since 1946. We are a small business engaged in the manufacturing of precision, complex components and assemblies to customer design. We do multi-axis CNC machining up to 7 axis. We have clean room assembly capability. Hoffman Engineering Corporation Stamford, CT 06907
Contact name:
Jack DeSoye
Phone: 203 425-8900 URL:
www.hoffmanengineering.com
At Hoffman Engineering we know light. We simulate it and detect it. We filter it and focus it; bend, project and analyze it. We design, build, test and calibrate equipment to measure it. We have been designing equipment for and supporting the lighting needs of the Aerospace, Defense, Automotive and Display industries since 1955. HOHMAN PLATING & MFG., LLC Dayton, OH 45404-1132
Contact name:
Mike Post
Phone: 937 228-2191 URL:
http://www.hohmanplating.com/
Hohman offers a wide variety of metal finishes. see our WEB page for a complete listing. We are ISO/TS 16949:2002, AS9100B:2004,and NADCAP certified and process to most all MIL,ASTM, and AMS plating specifications. Ho-Ho-Kus, Inc. PATERSON, NJ 07524-2523
Contact name:
Gene Kurish
Phone: 973 278-2274 URL:
www.hohokusinc.com
Manufacturer of Aerospace parts.Clamps, Worm drives, Nuts, Bolts.Progressive Sheet Metal Stamping.Professional Assembly, Inspection and Packaging. Homogeneous Metals, Inc. CLAYVILLE, NY 13322
Contact name:
JOHN L. LAPINSKI
Phone: 315 839-5421 URL:
hmipowder.com
Manufacture superalloy powder metal and Plasma ""thermal"" spray powders for the aerospace and other industries. HONEYWELL - Sensing and Control Freeport, IL 61032
Contact name:
M45 Marketing Services
Phone: 800 537-6945 URL:
www.honeywell.com/sensing
Honeywell Sensing and Control manufactures and supplies sensors, switches, manual controls, fiber-optics components, IT, emitters, and receivers. Provides to commercial, business equipment, consumer, medical, automotive, aerospace, and industrial markets worldwide. Horizon Aerospace Victor, NY 14564
Contact name:
Micheal T. Ferreby
Phone: 585 742-4936 URL:
www.horizonaero.com
Horizon Aerospace produces a wide variety of standard commercial and military based instrumentation that is by design configurable to application specific requirements meeting industry and regulatory-based aerospace standards with minimal delivery lead times. Our experience with Aerospace instrumentation includes digital and analog data displays, system design, detailed design, test, verification and validation, sensor selection and signal conditioning. Design processes are based on structured analysis and design methodologies compliant with industry and regulatory standards. We provide our customers with years of experience in addressing environmental concerns in both the military requirements (MIL-STD-810) and the commercial requirements (DO-160D). We also have the experience and capability to develop software to the rigorous standards of DO-178B HR Synergy Poquoson, VA 23662-1563
Contact name:
George Denninghoff
Phone: 757 868-5825 URL:
www.hrsynergy.com
HR Synergy's services are focused on delivering highly integrated performance solutions to its clients. We provide a broad spectrum of analysis for public, private or public/private consortium activities including facilitation, strategic planning and training services. We are proud to have received Dunn and Bradstreetâ&#x20AC;&#x2122;s highest past performance rating from our clients. We have consulted to government, aerospace, communications, professional service, healthcare and manufacturing clients. Included are Alcoa, Siemens VDO, Alltel, NASA and two of its public private consortiums, the AGATE Alliance and the SATS program. We also offer performance management services including the integration of performance systems from linking strategic elements to performance factors to delivering performance appraisals.
Hurd Aero, LLC Savannah, TN 38372
Contact name:
JOSEPH E. HURD
Phone: 731 607-7181 URL: AeroSpace Consultant. Providing Consultant for Exercises, Wargames, Experimentation, and Command and Control. Hurlen Corporation Santa Fe Spgs, CA 90670
Contact name:
J. HURTADO
Phone: 562 941-5330 URL:
www.hurlen.com
METAL SERVICE CENTER..SUPPLIER OF HARD TO FIND METALS TO GOVERNMENT, AVIATION, AND AEROSPACE COMPANIES HURLEY, INGA Westfield, MA 01085-4831
Contact name:
Inga Hurley
Phone: 413 5628450 URL:
n/a
Sole Proprietorship - Women-Owned - Quality Consulting Services including documentation, training, consulting Hydradyne Hydraulics LLC Tampa, FL 33619-2319
Contact name:
gale helton
Phone: 504 227-0254 URL:
www.hydra-dyne.com
Hydradyne Hydraulics sells and services hydraulic systems to many different industries. We have 30 branches located in the Southeastern and Southwestern U.S. We represent many of the finest Fluid Power Manufacturers in the industry.Parker Hose & Fittings, Denison Hydraulics, Parker Hydraulics, Poclain, Linde, SnapTite, Braden/Gearmatic Winches, Heco Gear, RR Transmission, Gear Products, Lake, Noshok, Brand Hydraulics, Calzoni, Zinga, Hartmann, Gresen Valves, Chelsea PTOs, and also Hydradyne Custom Power Units.Test Stands for Aerospace Industry.Our fabrication center builds the finest quality systems.Hydradyne's Management System is ISO 9002 Certified. Hydraulic Technology, Inc. Rocklin, CA 95765
Contact name:
Daniel Stokes
Phone: 916 645-3317 URL:
http://www.hydraulictechnology.com
Manufacturers of test, repair, ground support and custom fabricated equipment for the military, aerospace, industrial and automotive communities. Hypertronics Corporation Hudson, MA 01749
Contact name:
Aubrey Vachon
Phone: 978 568-0451 URL:
www.hypertronics.com
Hypertronics is a world-leading provider of high performance Interconnect solutions for the most demanding applications. Hypertronics designs, manufactures and distributes specialty connectors and connector solutions for the electronics industry. All Hypertronics' products are built upon our legendary Hypertac contact design, which outperforms all other interconnect contact solutions in terms of reliability, low contact forces and value. Providing customers with the highest degree of support from engineering, manufacturing and customer service, we have established ourselves as the premium source for specialty connector solutions in the industry's most demanding markets such as: medical, industrial, test and measurement, military and aerospace. I M C Magnetics Corp., Arizona Div. Tempe, AZ 85281
Contact name:
Ron Baier
Phone: 480 968-4441 URL:
www.imc-magnetics.com
I. T. Services Culver City, CA 90230-6609
Contact name:
Gordon Ross
Phone: 310 216-6715 URL:
www.e-its.com
We provide High Tech Temporary Help on a national basis. Our core business is the Aerospace and Defense Industry. We also provide Pay-Rolled employees to most major Defense Contractors. I.R.I.S. technologies Peoria, AZ 85345-3437
Contact name:
James T Sutterfield
Phone: URL: www.iristechnologies.biz
I.S.S. Corporation
Irvine, CA 92612
Contact name:
Jacob Nelik
Phone: 949 752-2528 URL:
www.issc.net
Established in 1993 as a VAR and System integrator providing hardware, software and custom parts to Government, Aerospace and educational institutions. Providing Cellular communiucation terminals/modems with built-in programming capability, reducing the need to develop separate hardware, hence reducing costs and development turn around time. Icon Northern Rubber Notts, UK, Br DN22 6HH
Contact name:
Rebecca Johnson
Phone: 416 771-4324 URL:
www.iconpolymer.com
The Icon Polymer Group is a leading worldwide manufacturer of technical rubber components, with a turnover in excess of ÂŁ20m. At our Retford site, in North Nottinghamshire, we have over 330 employees and a wide range of products including:Automotive : Fabric reinforced brake chamber diaphragms Steering couplings and rubber bearings Injection moulded gaiters and hoses Brake sealsAerospace : Lightweight multi branch ducting and hoses Oxygen breathing hoses Inflight refuelling hoses SealsSpeciality : Polymer-coated fabrics Flat drive beltsFabric reinforced diaphragms Injection, compression and transfer mouldings Hand fabricationsPharmaceutical : Icon is a market leader in the fields of; Automotive/Transport, Pharmaceutical â&#x20AC;&#x201C; Healthcare, Specialist Technical Solutions, Aerospace/Defence and Domestic Appliances. Our wide range of skills, manufacturing techniques, compounds and technical knowledge enable us to put forward the best technical and cost effective solution for many applications.At Icon, we provide many services, which include full design and testing facilities to international standards, and to many of our customer specifications. Icon is approved to QS 9000 & ISO 9001 and currently holds many customer approvals including various Aerospace, Pharmaceutical, and Automotive and Defence qualifications ICS Sensor Processing (A member of Radstone Embedd Billerica, MA 01821-3487
Contact name:
Susan Anderson
Phone: 613 749-9241 URL:
www.ics-ltd.com
Incorporated in 1980, Interactive Circuits and Systems Ltd. (ICS) - A member of Radstone Embedded Computing; is a powerhouse in the Embedded Systems industry serving real-time sensor processing applications from Sonar to Cellular with open-architecture, COTS (Commercial-off-the-shelf) boards and system-level products. ICS products are used in sonar, acoustic test and measurement, radar, military and commercial wireless, and RF test and measurement applications. More specifically - ICS is a leading designer and developer of software radio modules for defense radio applications such as radar, signal intelligence, secure communications and tactical receivers. As well, the combination of our data acquisition
technology and applications expertise in DSP and software radio with Radstone's broad range of rugged computer products, enable us to provide a complete system solution from data acquisition through to operator displays. ICS customers include all major US & International defense and aerospace companies; government laboratories; and major telecom equipment manufacturers. An inventor of the FPDP data flow standard, ICS is highly regarded as a solution provider with a thorough knowledge of complex sonar, radar and communication systems. Through its prime partners, ICS offers turn-key solutions and as well as installation and training services for military sensor processing and mechanical test and measurement applications. IDD Aerospace Corporation Redmond, WA 98052
Contact name:
Shannon Howland
Phone: 425 897-4318 URL: IDD is a subsidiary of ZODIAC Corp. and manufactures Intregrated Switch Panels, Control Panel Assemblies, and Bezels to meet both Military and Commercial applications. IDD is also the leader in high performance NVIS and Commercial Light Plates for use in flightdecks of all aircraft. IEH Corporation Brooklyn, NY 11220-2525
Contact name:
David Offerman
Phone: 718 492-9698 URL:
www.iehcorp.com
IEH offers custom-designed Hyperboloid connectors created to meet our customer's specific requirements. Our connectors provide the low forces, extreme shock and vibration resistance and long life that are the hallmarks of Hyperboloid technology. IEH connectors are used in a variety of industries and applications, including: military, aerospace, computer, medical, automotive, test equipment and commercial IFOS, Inc. Sunnyvale, CA 94085-3525
Contact name:
Lee Ky Good
Phone: 408 565-9000 URL:
www.ifos.com
IFOS, Inc., of Sunnyvale, California, manufactures and sells advanced optical sensing systems, sensors, software and services in the structural monitoring and environmental safety markets for the transportation, oil & gas, civil, security, and bio/chemical industries. The multi-sensor monitoring system, I*SenseTM, has yielded a family of system level products that are rugged, compact, light-weight, fast, highly sensitive, precise, durable, low in power consumption, immune to electromagnetic interference, modular and scalable for mass production. These products provide order of magnitude cost/performance gains over competitive offerings in the market for a number of critical applications. IFOS is shipping the fastest 1 - 16 Channel fiber optic sensor systems available in the market today. At the heart of the I*SenseTM Interrogation System is a proprietary state-of-the-art, solid state and super fast optical spectral processor with subpicometer resolution. I*SenseTM is designed economically to monitor a flexible number of sensors ranging from a few to as many as an unprecedented one thousand. IFOS has become a
virtual one-stop shop providing total solutions to customers, providing I*SenseTM monitoring systems, intelligent data acquisition, interrogation, analysis and display software as well as ancillary monitoring and maintenance services. Ignition Technologies, LLC Sudbury, MA 01776
Contact name:
Sanjay Patel
Phone: 617 320-0328 URL:
www.ignitiontechnologies.com
Experienced program management, engineering services and software consulting for the department of defense and prime contractors.Security clearances available.Engineering services include program management, mechanical engineering, aerospace engineering and electrical engineering in all phases of development. Software capabilities include Java, JDBC,.Net, SQL, Oracle, VB, J2EE. IMAGINEERING ENTERPRISES INC SOUTH BEND, IN 46619
Contact name:
F. James Hammer
Phone: 574 287 URL: www.iftworldwide.com Imagineering Finishing Technologies is a world class leader in the metal finishing field. Recognized world wide for it's KnowledgeSource (TM) approach to engineered metal finishing solutions, IFT offers Electroless Nickel, various conversion coatings such as Zn, Mg and Fe Phosphate, non-destructive testing, consulting and a variety of other services.Imagineering is you metal finishing partner. IMC Magnetics Corp. Tempe, AZ 85281-2993
Contact name:
Kimberly Lilly
Phone: 480 968-4441 URL:
www.imc-magnetics.com
Custom manufacturer of solenoids, valves (pnumatic, Hydraulic and fuel), fans, blowers and motors for aerospace, poer generation, semiconductor equipment and industrial applicaitons. We offer rapid prototypes on new development of solenoid/valve and fan/motor programs. IMP Aerospace & Defence Enfield, No B2T1L5
Contact name:
Carl F. Kumpic
Phone: 902 873-2250 URL:
www.impaerospace.com
IMP Aerospace & Defence is a full service and manufacturing company with three dvisions Military Engineering and Maintenance, Electronic Systems and Aerostructures. With more than 1900 engineering, technical and managerial staff working with ISO 9000 and AS9100
management and quality systems, IMP Aerospace & Defence brings to bear almost 60 years experience and an international reputation for providing comprehensive engineering solutions as well as support to military and commercial programs. IMPAK Corporation Los Angeles, CA 90061
Contact name:
Brian Knoll
Phone: 310 715-6600 URL:
www.sorbentsystems.com
Manufacturer of thermal impulse heat sealing machinery. including hand sealers table top bag sealers, vacuum sealers, vacuum chambers, extended lenght and contour sealers. Provider of flexible packaging for biomedical and aerospace industries. Specializing in in high barrier films, foil laminates, mil-spec material and food grade materials.Provider of Desiccants and Oxygen Absorbers, in a variety of sizes and prepackaged formats suitable for different applications. Desiccant Paper, sachets and capsules. Low Temperature, Fast Acting and Grease Resistant Film Oxygen Absorbers. Indiana Aircraft Hardware Fortville, IN 46040
Contact name:
Mike Ferrell
Phone: 317 485-6500 URL:
WWW.INDIANAAIRCRAFT.COM
MANUFACTURE AND STOCKING DISTRIBUTOR OF AEROSPACE HARDWARE AND FASTENERS. Industrial Ceramic Technology, Inc ANN ARBOR, MI 48103-9503
Contact name:
Stacy Bering
Phone: 734 761-8137 URL:
www.indceramictech.com
Manufacture advanced ceramic-matrix composites(CMC) using silicon carbide whiskers. Specialize in an electroconductiveCMC capable of being EDM cut at tool steel speeds. Applications include dies for extruding, drawing and forming metals, cutting tools, and tooling/wear parts for industrial, aerospace, defense, and medical use. Industrial Fluoro-Plastics, Inc. West Jordan, UT 84081-5641
Contact name:
Bob Chavez
Phone: 801 282-6722 URL:
www.ifp-ptfe.com
IFP is a Molder of PTFE (Teflon速), rods, blocks and tubes. All molding is performed in a cleanroom environment using a variety of compounds. IFP also applies PTFE coatings to various molds, sealing dies, medical equipment, packaging equipment and industrial equipment.
Industrial Laminates Norplex, Inc. Postville, IA 52162
Contact name:
Robert Smail
Phone: 608 781-7215 URL:
www.ilnorplex.com
Industrial Laminates/Norplex, Inc., has purchased the assets of Micarta Industrial Composites, and the new Company, Norplex-Micarta is providing high-performance thermoset composites in sheet, tube, rods and molded shapes for: Power Generation and Distribution, Transportation, Aerospace, Military, Automotive, Electronics, Telecommunications, Medical and Energy Exploration. We manufacture the entire line of thermoset composites to NEMA, IEC, IPC, Industrial Standards, and numerous specialty products in our enlarged facility in the Mid-West. Norplex-Micarta has over one hundred years of experience in the laminating industry, and our engineers are constantly developing new products for new applications; Ballistic Resistant Laminate (BRASS), Pipeline Insulation (NP500WR), Vibratory Springs (NP510UD), StormBlocker (Tornado Shelter Surface Material) and StormShield (Hurricane Window Covering). Call NorplexMicarta Customer Service at 800 350-9490 or email info@ilnorplex.com or visit our web site at www.ilnorplex.com for more information about high-performance thermoset composites and how they will help your with your applications. Industrial Tool, Die & Engineering Inc. Tucson, AZ 85714-3431
Contact name:
Don Theriault
Phone: 520 745-8771 URL:
www.itde.com
manufacturer of complex machined parts Industrial Tube Corp. Perris, CA 92571
Contact name:
Robert Ansalone
Phone: 909 657-2611 URL:
http://www.industrialtube.net
One of the world's leading aerospace producers of non-metallic tubing and ducting. INDUSTRIAL TUBE CORPORATION Perris, CA 92571-3228
Contact name:
Robert Gregg
Phone: 951 657-2611 URL:
www.industrialtube.net
MANUFACTURER OF NON-METALLIC TUBING, HOSES, HOSE AIR DUCTS, SPECIAL SHAPES, COMPOSITES, WASTE DRAINS, PRIMARILY FOR THE AEROSPACE INDUSTRY. INFINITE SPACE SYSTEMS, INC.
Tucson, AZ 85705
Contact name:
Milton J. Schick
Phone: 520 888-1731 URL:
www.infinitespacesystems.com
&#65279;Aerospace company pursuing R&D in materials and systems, including visual optical quality CFRP carbon/epoxy composite mirrors molded and replicated from ultra-high quality convex glass molds with a RMS surface roughness of 6.5 Angstroms as removed from the glass mold, epoxy resins that produce no internal stresses during or after curing, flexible composite armor, a 100% water vapor barrier polyurea coating to prevent moisture absorption on Earth andoutgassing in the vacuum of space and may resist mono-atomic oxygen attack, insulation materials (some spray applied) covering temperature ranges from -300 degrees F to +7000 degrees F, unusual and novel techniques for advanced spacecraft propulsion. Infopower International Inc. Mississauga, ON L4Z 3K7
Contact name:
Prabir Dutt
Phone: 905 507-2100 URL:
www.erpdbo.com
InfoPower International Inc., a Canadian software company, has been operating since 1983 with it's own state-of-the-art ERP II Enterprise Solutions package, developed with over 280 man years of effort and with over 370 installation sites at diverse small businesses to large multi-nationals worldwide, from North America to Europe and the Far East. These customers are involved in a broad spectrum of industries, from major aerospace & defense, to food processing, to distribution, to publishing, to automotive, to 3rd. party logistics and many other combinations. Please refer to the InfoPower web site www.erpdbo.com (Enterprise Resource Planning with Dynamic Business Objects) for more details. Infrared Systems Development Corporation Winter Park, FL 32792
Contact name:
Kimberly Griffin
Phone: 407 679-5101 URL:
www.infraredsystems.com
Infrared Systems Development Corporation (ISDC) Designs and Manufactuers High Quality Electro-Optical Systems and Components for all aspects of Infrared Sciences. Since the 1950 s our products have been used in applications from Biotechnology to Aerospace Systems. Our High Performance Industry Standard Blackbody Sources have recently been improved with a 0.1ยบC Resolution PID Controller and Long-Life CoAxial Cavity Heaters. Our New Femto-Second Laser Pulse Spectroscopy System is used to analyze complex Biological samples to further Medical Sciences by understanding Protein and Amino Acid structures. And our Standard and Custom Infrared Test Stations are used to Test, Calibrate and Align Infrared Cameras, Radiometers and Detectors. We have a solution for you that will fit in your budget. Please Contact Andrew J. Duran or Elizabeth Amyx at (407) 679-5101 for more information. Ingersoll International, Inc. Rockford, IL 61103
Contact name:
Laura Bawinkel
Phone: 815 987-6582 URL:
http://www.ingersoll.com
INGERSOLL INTERNATIONAL is a privately held manufacturer of machine tools and high precision complex parts for industrial applications around the world. The company offers a diverse range of products, from general purpose, modular machining centers to high velocity fiveaxis machines and composite manufacturing machinery for aerospace, primary metals, power generation, agriculture, construction, automotive, diesel, and die/mold industries. Ingersoll's Contract Manufacturing division provides precision parts manufacturing and complex assembly services. From large, precision components to prototype parts and testing of advanced machining concepts, Ingersoll manufacturing facilities can accommodate parts as large as 19 meters long and weighing up to 50 tons, with the capacity to fabricate and machine weldments weighing up to 80 tons. Ingersoll's experienced staff of engineers and technicians also offer a broad range of value-added options to service and support machine tools built by Ingersoll and other manufacturers. Ingersoll engineers concept, design and implement custom engineering solutions, and field service technicians travel worldwide to retrofit, repair, inspect, move and/or install machine tools. Innovative Manufacturing Technology, Inc. (IMT) Huntsville, AL 35811-7940
Contact name:
Greg Hollis
Phone: 256 746-0901 URL: Innovative Manufacturing Technology, Inc. (IMT) is a supplier of machined and fabricated product. IMT has over 25 years experience in the business of manufacturing sheet metal and machine products from commercial to aerospace. IMT offers a highly flexible manufacturing facility, using the latest state of the art multi-axis, manufacturing equipment. Our flexibility extends from prototypes, to high volume orders, from initial design engineering assistance, to just-in-time manufacturing, with a reputation for quality. Or philosophy is to provide customer service, on time delivery, quality craftsmanship and professional management, while offering competitive pricing in an ever-changing environment. Innovative Materials Testing Technologies, Inc. SUPERIOR, CO 80027-4633
Contact name:
Yushi Sun
Phone: 303 554-8000 URL:
www.imtt-usa.com
IMTT is the sole source providing remote field eddy current techniques for non-destructive inspection of aircraft/aerospace components.Unique features of the techniques include:1. Deep penetration. e.g. detecting corrosion/crack thru 0.8"" into multi-layer aluminum structures, detecting Al or Ti layer thru 0.9"" graphite-epoxy composite without removal of fasteners and disassemly of structure, detecting crack/corrosion of bushed hole without removal of bushing.2. High sensitivity, e.g. capable of detecting a 0.004"" deep corrosion pit on backside of a 0.125"" thick Al layer.3. Easy to use, similar to using a conventional ET system and accommodate commercial EC probes;4. Low price, similar to that of an EC system;5. Robust and portabe. INORA Technologies, Inc. Ann Arbor, MI 48108-9719
Contact name:
Nate Enstrom
Phone: 734 302-7488 URL:
www.inora.com
Our main business is the licensing of our Core INORA Data Evaluation Engine. The robust INORA Core Engine is ready to apply to any data evaluation application, and uses proprietary algorithms to automatically recognize and appropriately deal with all unexpected deviations and constraints within a data set, regardless of what the data represents, or where it comes from. The INORA Core Engine is available either through a direct Core Technology License, or as a ready to use, Core Technology-based application built for your specific needs. Instar Engineering and Consulting, Inc. Littleton, CO 80128
Contact name:
TOM SARAFIN
Phone: 303 973-2316 URL:
instarengineering.com
Short courses and engineering services in the space industry. Expertise in structures, dynamics, mechanical systems engineering, and system development. Integrated Environmental Services Inc. Lake Forest, CA 92630
Contact name:
Ron Gregg
Phone: 949 460-7000 URL:
www.iesinet.com
Established in 1995, Integrated Environmental Services Inc. is a full service environmental consulting firm with an unmatched track record in serving private and government-sector clients in a variety of industries, including: aerospace, chemicals, electronics, manufacturing, mining petroleum and real estate. Integrated’s areas of expertise include: Project Strategy, Design and Management, Information and Data Management and Software Development, Risk Management, Agency Interaction and Negotiation, Strategic Plans & “Whitepapers” to Achieve Regulatory “Agency Closure”, Site Development and Land Use Planning, Project Quality Assurance/Quality Control (QA/QC), Health Risk Assessment, Hazardous Waste Management. Regulatory Reconnaissance and Compliance, Site Environmental Health and Safety, Remedial Investigation/Feasibility Study (FI/FS) and Remedial Cost Estimation/Analysis, Groundwater Fate and Transport Modeling, Field Work Support, Site Assessment and Characterization, among others.Integrated staff is a close-knit group of outstanding, experienced technical and management professionals who are dedicated to working closely with clients, not only in resolving open environmental issues but also in forging a successful path forward.In a relatively short span of time, clients have saved over $65 M in remedial costs because of Integrated’s successful application of broad knowledge of environmental regulations, remedial technologies, and project management. Integrated Polymer Industries, Inc Santa Ana, CA 92704-6448
Contact name:
Ergun Kirlikovali
Phone: 714 434-0800 URL:
www.integratedpolymer.com
Zero-VOC company... Manufactures and markets IPN based advanced polymer formulations to aerospace, construction, repair and maintenance industries. Nearly 4,000 products , as adhesives, coatings, sealants, primers, and more. Pollution prevention, high performance, sprayability, adjustable parametrs like potlife, cure time, hardness, and more. Not a drop of solvent used in any formulation since 1985... Major clients include US Air Force, US Navy, power generation, paper mills, chemical processing, petroleum refinaries, and public works. INTEGRITY SYSTEMS, INC. BELMONT, MA 02478-3224
Contact name:
Dr. Neal A. Carlson
Phone: 617 484-8412 URL:
www.integrity1.com
Integrity Systems is a small aerospace engineering firm specializing in fault-tolerant navigation, multiplatform track fusion, and geodetic modeling. Our emphasis is on system design, algorithm development, performance analysis, and software engineering.Our primary focus is on integrated navigation systems and multiplatform target tracking systems for air, space, and marine applications. Our staff has contributed to critical national programs like the Space Shuttle and baseline GPS navigation equipment. Our more recent R&D work has addressed advanced navigation and tracking methods, geo-data modeling, and high-precision reconstruction of aircraft/missile flight test trajectories. Interactive Circuits and Systems Ltd. Ottawa, ON K1J 9G2
Contact name:
Brian McCormick
Phone: 613 749-9241 URL:
www.ics-ltd.com
ICS designs and manufactures COTS (commercial off-the-shelf) data acquisition boards, software and integrated sub-systems. ICS products are used in sonar, acoustic test and measurement, military and commercial radar, military and commercial wireless, and, RF test and measurement applications. The combination of our data acquisition technology and applications expertise in DSP and software radio with Radstone's broad range of rugged computer products, enable us to provide a complete system solution from data acquisition through to operator displays. ICS customers include: all major US and international defense and aerospace companies; Government laboratories and major telecom equipment manufacturers. Inter-Coastal Electronics Mesa, AZ 85215
Contact name:
Thomas Hayes
Phone: 480 981-6898 URL:
inter-coastal.net
Inter-Coastal Electronics, Inc. (ICE), incorporated in 1990, is a small, privately-held company dedicated to providing our government and commercial customers with the best possible equipment to meet their training and testing requirements. The company designs, develops, manufactures and markets state-of-the-art simulation, training and instrumentation devices for the U.S. military as well as commercial position tracking and testing equipment.
Intercomp Co. Inc. Medina, MN 55340-9342
Contact name:
Robert Kroll
Phone: 763 476-2531 URL:
www.intercompco.com
Manufacturer of high precision weighing and measurement equipment for industrial, automotive, aerospace, transportation, warehouse, and agricultural applications. Interconnect Devices, Inc. Kansas City, KS 66106
Contact name:
Karen Bock
Phone: 913 342-5544 URL:
www.idinet.com
Interconnect Devices, Inc. designs and manufactures probes for PCB and semiconductor test and high reliability connectors. IDI high reliability interconnects have low and consistent resistance, cycle life of 500,000 connects/disconnects, bandwidths above 10 GHz, densities of 0.25mm pitch and above, current rating up to 45A, easy blind-mate characteristics and provide outstanding performance in applications where severe shock and vibration are present. Markets served include, military, medical and industrial. Interface & Control Systems Inc Indialantic, FL 32903
Contact name:
BRIAN BUCKLEY
Phone: 321 723-0399 URL:
www.interfacecontrol.com
ICS is a product development and engineering services firm specializing in real-time, embedded and autonomous command and control software systems. We provide a robust software product called SCL - a rule -based Expert System that provides a framework to develop real-time command, control and monitoring for a wide variety of applications for Satellite Control Centers, Integration and Test Facilities, and Simulators. ICS also produces the Remote Intelligent Monitor System (RIMS) which is a web-based monitor and control Graphical User Interface used along with the SCL toolset. SCL, Automatiion, Command and Control, Expert System Interface & Control Systems, Inc. Indialantic, FL 32903-3112
Contact name:
BRIAN BUCKLEY
Phone: 321 723-0399 URL:
www.interfacecontrol.com
ICS is a product development and engineering services firm specializing inreal-time, embedded and autonomous command and control software systems. Weprovide a robust software product called SCL - a rule -based Expert Systemthat provides a framework to develop real-time command, control andmonitoring for a wide variety of applications from Satellite Control Centersand Simulators to eCRM, Asset Tracking, and Intelligence systems. Ourhighly qualified
engineering staff have provided product, training, andengineering services to a wide variety of customers like Lockheed Martin,The Aerospace Corporation, Ball Aerospace, Johns Hopkins University andApplied Physics Lab, Naval Research Lab, Northrop Grumman/Aerojet, GEHarrisand the Army. These companieshave relied on ICS for mission critical systems that include:· Control Centers· Embedded (flight and ground)· Test Sets and Ground Support Equipment· Tactical Intelligence· Fault Detection and Recovery· Simulations Interim Solutions for Government, LLC Oklahoma City, OK 73112
Contact name:
Gerald W. Williams
Phone: 405 286-0915 URL:
www.isgovt.com
Service Disabled Veteran Owned Small Business. Provides temporary personnel under 5 CFR 300.501. Also a source of training development and delivery, air traffic control, aviation systems maintenance and repair, aviation safety and security, engineering support, meteorological support, HRM support, management studies and analysis, ADA and Section 504 A&E Audits and Studies. Interlectric Corporation Warren, PA 16365-2849
Contact name:
Robert Brown
Phone: 814 723-6061 URL:
www.interlectric.com
Interlectric Corporation is one of the largest independent fluorescent lamp manufacturers in the world, producing all its lamps in the U.S.A. Currently we manufacture a full range of T8 and T12 fluorescent lamps. We also carry a full line of HID, incandescent, ballast, and tanning products.In addition to a complete line of general lighting application lamps, Interlectric offers specialty lighting in the areas of actinic, aerospace, agricultural, aperture, appliance, entertainment, full spectrum, medical, merchandising, mining, reprographic, sign, tanning, and ultraviolet sources. Our own fleet of trailers enhances our ability to serve our customers by virtually eliminating breakage and lost shipments. Complementing our standard lamps, Interlectric provides you with the opportunity to develop new products through our engineered lamp department. Through this department, our engineers work directly with you to generate specifications and product in almost any quantity.Interlectric is dedicated to producing quality products to meet the needs of our customers in the marketplace. International Aero, Inc. Burlington, WA 98233-3623
Contact name:
Rick Stables
Phone: 360 757-2376 URL:
www.intl-aero.com
Since 1988, International Aero, Inc. has been solely dedicated to provide the world’s airlines and lessors with the highest quality interior components and services.From component overhauls to fleet wide reconfigurations, IAI is a fully integrated supplier of aircraft interior equipment and services. We maintain extensive in-house capabilities to project manage, engineer, fabricate, integrate, test and certify reconfigurations and modifications to aircraft interiors.
INTERNATIONAL CERAMIC ENGINEERING INC Worcester, MA 01606-3307
Contact name:
Meg Mulhern
Phone: 508 853-4700 URL:
http://www.intlceramics.com
ICE is a manufacturer and fabricator of standard and customer advanced ceramic and machinable plastic components for many industries. Materials are used for high wear resistance, corrosion and errosion resistance, high temerature, thermal insulation, and fracture toughness. Prototype to production quantities produced. Rapid Prototyping option also available.Please contact International Ceramic Engineering for cost effective design, development and manufacturing assistance. INTERNATIONAL CERAMICS ENGINEERING CORPORATION Worcester, MA 01606-3307
Contact name:
MEG MULHERN
Phone: 5088534700 URL:
http://www.intlceramics.com
Manufacturer and Fabricator of Advanced Ceramic and Plastic Materials for many industries including Aerospace, Semiconductor, Automotive, etc. International Management Systems, Inc. Tampa, FL 33609
Contact name:
Steve Pearson
Phone: 813 639-9876 URL:
www.ims4iso.com
International Management Systems, Inc. is a United States-based, ANSI-RAB accredited registrar of management systems such as ISO 9000. In addition, IMS offers verification of management systems modeled on the aerospace standard AS9100, as well as the telecommunications standard TL9000. Intertape Polymer Group, Inc. Sarasota, FL 34232
Contact name:
Drew Kisela
Phone: 703 988-9785 URL:
www.intertapepolymer.com
Intertape Polymer Group Inc. (IPG) is an acknowledged leader in the packaging industry. Leveraging its advanced manufacturing technologies, extensive research and development capabilities and a comprehensive strategic acquisition program, the company has assembled the broadest and deepest range of products in the industry. This strategy allows IPG to create a sustainable economic advantage for its customers through its commitment to deliver a portfolio of solutions around the most efficient supply chain in the industry.IPG manufactures a broad range of packaging products and systems that reflect the needs of both its industrial and retail
customers. These include one of the largest offerings of tape available: pressure-sensitive and water-activated, carton-sealing, masking, filament, flatback, cloth/duct, double-coated, high performance specialty, electrical, automotive, aerospace and HVAC tapes. Additional products include shrink film and stretch film as well as carton-sealing equipment, ink jet printing systems and labeling systems.Intertape is a leader in the engineered coated products and flexible intermediate bulk container (FIBC) industries. With heavy emphasis placed on R&D, IPG is bringing to market many innovative new products for the agricultural and structural fabrics industries.Established in 1981 with headquarters in Montreal, Quebec and Bradenton, Florida, Intertape employs approximately 2,600 employees with operations in 12 locations, including 12 manufacturing facilities in North America and Europe. Inventex, Inc. West Nottingham, NH 03291
Contact name:
Gary Smith
Phone: 603 942-9857 URL:
www.inventexinc.com
Precision machining of prototype glass and ceramic optics andcomponents for the aerospace industry. IRD Glass Litchfield, MN 55355-5324
Contact name:
Todd A. Anderson
Phone: 320 693 URL: http://www.irdglass.com IRD Glass specializes in manufacturing optical and industrial glass components using a wide range of raw materials. They excel at holding very precise tolerances to help their customers solve excess variation problems. IRD is dedicated to each customer, developing an intimate relationship with them to ensure that projects are completed on schedule, have met or exceeded all specifications, and are completed in the most economical manner feasible. They are currently sole-source providers to numerous world-class corporations in the sensor, machine vision, medical, pressure transducer, defense, aerospace and other industries. Iron Systems, Inc. San Jose, CA 95131-1229
Contact name:
Bob Sidhu
Phone: 408 943-8000 URL:
www.ironsystems.com
Focused on its primary mission to provide state-of-the-art servers and computer systems. Iron Systems, Inc. is a manufacturer of high-end servers in industrial rack-mount designs and standard tower case for use in business, research, engineering, industrial, aerospace and military settings. As one of the pioneer of Internet ready serversâ&#x20AC;Ś. Iron Systems engineers have been a leading provider of custom-build, Solutions tailored to its customerâ&#x20AC;&#x2122;s unique needs based on some of the most popular operating systems such as Linux, FreeBSD and Microsoft 2K. Iron systems is complete and total solution company when it comes to network integration hardware. Our goal is to provide macro solution @ micro level.In order to ease the process of ordering and getting helpful information regarding servers, networking hardware and other related computer
equipments we have a well up to date and complete web site. We update our web site on daily bases. We are a small and minority owned business enterprise. Irvin Aerospace Canada Ltd. Belleville, On K8N 5J1
Contact name:
Eileen
Phone: 613 967-8069 URL:
www.irvincanada.com
IRVIN AEROSPACE, first established in 1919, produces all types of parachutes. Developed and tested for over 75 years, our parachutes are used for Aerial Delivery (personnel, cargo, inflatable life-support systems), Recovery Systems, and Deceleration Systems. Other products include airdroppable Rescue Systems, Parachute Mechanisms, and equipment Lowering Systems. Irvin also provides parachute packing and maintenance services for our customers. Our Engineering Department oversees all projects from the proposal stage to production, encompassing design, development, drawings, procedures, specifications, testing and approval of the first-off specimen. Irvin parachutes are used worldwide and are endorsed by many nations as products of reliability and quality. Island Components Group Inc BOHEMIA, NY 11716-3111
Contact name:
ROY A KOCH
Phone: 631 563-4224 URL:
www.islandcomponents.com
Manufacturer of specialty electromechanical rotating components and small actuators and drives for military/aerospace and industrial applications. Isola Group Chandler, AZ 85226
Contact name:
Matt Lake
Phone: 864 859-8127 URL:
www.isola-group.com
Manufacturer of High Pressure Laminates for Printed Circuit, high speed digitial, RF and MicroWave industries. ITT A/CD WLV Westlake Village, CA 91361
Contact name:
Jamie McGrath
Phone: 805 495-8420 URL:
www.aoa-gps.com
ITT Aerospace/Communications Division acquired Allen Osborne Associates, Inc. (AOA), a leading innovator and manufacturer of high precision GPS and SAASM technology. ITT A/CD WLV is a premier designer, developer and manufacturer of high precision, high performance Global Positioning System (GPS) receiver equipment. In twenty-seven years of operation the
Westlake Village facility (formerly AOA) has provided over 120 countries worldwide with high accuracy receivers of various configurations for commercial applications, such as for Time Transfer, Geodetic/Tectonophysics and Surveying applications. J C P M, INC RANCHO CUCAMONGA, CA 91730-5852
Contact name:
CARLOS CAJAS
Phone: URL: www.jcpm-inc.com AEROSPACE MACHINE SHOPMACHINED PRODUCTSISO CERTIFIED J M K Tool & Die Mfg. Rochelle Park, NJ 07662
Contact name:
John Kristofich
Phone: 201 845-4710 URL:
www.jmktool.com
LEADER IN QUALITY STAMPINGS!Manufacturing Company specializing in Serving: Electronics, Aerospace, Industrial, Automotive, Jewelry, Medical. Over 30 years of quality service to all trades. Modern 20,000 sq. ft. air conditioned plant. Innovative products design and development. Versatile precision tooling. Unique economical production methods. High quality assembly and finishing. Expert technical personnel.YOU NAME IT-WE MAKE IT, JMK is unique in the diversity of its experience and equipment. As all around stamping experts, with our own in house tool/die making state of the art facilities, we can produce quality tooling for virtually any industry. Industry's latest CAD/CAM systems. Advanced Equipment/wire EDMs, conventional EDMs and CNC machines. Jig borers, grinders and pantographs. 15 Power presses up to 125 Ton capacity. 15 Hydraulic presses up to 400 Ton capacity. All Materials Used: Titanium ( Hot Form and Stamped shapes ), Inconel, Monel, aLL Stainless Steel, BeCu, AL, Steel ( Cold Roll or Hot Roll), Cu, Brass, etc. J R D Aerospace, Inc. Tyler, TX 75701-2519
Contact name:
Jerry Mitchell
Phone: 903 592-1471 URL:
www.jrdaerospace.com
Electron Beam welding, Submerged Arc, Plasma Arc,Resistance Seam and GTAW Welding, Plasma spraying, Plating,Inspection services,X Ray,Fluorescent Penetrant,Magnetic particle and Turbine engine component repair. Jaco Engineering Anaheim, CA 92805
Contact name:
Lynda Early
Phone: 714 991-1680 URL:
www.JacoEngineering.com
Precision Machined Parts and assemblies. Aerospace, Military and Commercial Jaco Engineering Inc. Anaheim, CA 92805
Contact name:
Lynda Early
Phone: 714 991-1680 URL:
www.JacoEngineering.com
Precision Machined Parts and assemblies. Aerospace, Military and Commercial Jane's Information Group Inc. Alexandria, VA 22314-3240
Contact name:
Laura Long
Phone: 703 236-2465 URL:
www.janes.com
Jane Œs Information Group is a world leading provider of intelligence and analysis on national and international defence, security and risk developments. Jane•fs is an independent organisation with an unrivalled reputation of accuracy, authority and impartiality. Jayco Engineering, Inc. Costa Mesa, CA 92627
Contact name:
Chuck Girton
Phone: 642 9803 URL: MANUFACTURERS OF PRECISION MACHINED PARTS FOR GOV'T AND AEROSPACE. Jaycraft Corporation Spring Valley, CA 91979
Contact name:
Steve Hanks
Phone: 619 670-3900 URL:
http://www.jaycraft.com
Jaycraft Corporation specializes in precision CNC machined components and assemblies for turbine engines, aerospace, aircraft, compressors and more. Advanced in-plant capabilities enable Jaycraft to produce parts in small or large quantities that meet rigid commercial, industrial and military specifications and tolerances. For over forty years, Jaycraft Corporation is the preferred source of many customers for timely, efficient and quality machining solutions. Jay-Em Aerospace Cuyahoga Falls, OH 44223
Contact name:
FILORETA ALLEN
Phone: 330 923-0333 URL:
JAY-EM.COM
An aerospace manufacturer that has supplied wheels, brakes and spare parts to the US Air Force, DOD and FMS for over 30 years. Jenkins & Sons, Inc., M. W. Cedar Grove, NJ 07009-1813
Contact name:
Craig Sigler
Phone: 800 278-7437 URL:
http://www.jenkinsbrush.com
M.W. Jenkins' Sons is now well into it's second century of producing the finest, most durable, and most reliable brushes for users worldwide. Since the days of the horsecart, Jenkins has virtually set the pace for precision brushes in applications that range from heavy duty, high volume manufacturing to aerospace/military, nuclear power and petroleum. In fact, the Jenkins METLKOR brushes of all sizes are recognized as some of the finest available in thousands of industries. Jenks Metals LLC Orlando, FL 32809
Contact name:
WILLIAM HOLLINGSED
Phone: 407 855-0060 URL:
www,jenksmetals.com
Metals Service Center specializing in aerospace and defense metals. Over 50 years in the business. JET AEROSPACE INC Somerset, PA 15501
Contact name:
Joseph A Miller
Phone: 814 4436101 URL: Precision machining geared to the aerospace engineering. Jet Fabricators, Inc. Michigan City, IN 46361-0266
Contact name:
Larry E. Hussey
Phone: 219 8728611 URL:
http://www.jetfab.com
Established in 1956, Jet Fabricators utilizes over 100,000 square feet of floor space in the manufacture of custom steel fabrications for OEM's in the construction machinery, material handling, agricultural machinery and aerospace industries, as well as the service machinery and power generation industries. Fabrications will range from 20 gage sheet up to 2 inch plate, in both ferrous and non-ferrous materials. Quantities produced can be from one piece prototypes to multi-thousand production runs. JET TECH International, Inc.
Jupiter, FL 33458
Contact name:
Drew D. Ehlert
Phone: 561 748-0770 URL:
www.jettechintlinc.com
Engineering and technical support for military and commercial jet engine design, incident investigation, overhaul, repair development and test. We also, supply marine and industrial safety products. Jetaire Aerospace & Technology, Inc. Atlanta, GA 303316628
Contact name:
Richard Campbell
Phone: 404 346-7175 URL:
www.jetaire-aerospace.com
Development and manufacture of commercial and military aircraft systems. Federal Aviation Administration (FAA) regulatroy consulting for airlines. JETEC Corporation Costa Mesa, Ca 92626
Contact name:
DERRECK FORD
Phone: 949 477-6161 URL:
www.jetec.com
JETEC is a minority-owned company specializing in industrial inkjet, laser and dot peen marking solutions for Mil-Std 130 UID compliance. We offer a wide range of labels and tags as well as label generation software and systems. Our Express Product Marking Service is ideal for customers seeking to contract labeling and direct product marking of small and large jobs. Visit our website at www.jetec.com to learn more about the products and services offered by JETEC Corporation. Jewell Instruments, LLC Manchester, NH 03103-3324
Contact name:
Sandra Mannion
Phone: 603 669-6400 URL:
www.jewellinstruments.com
Jewell Instruments is a world leader in the manufacture and distribution of panel meters, avionics components, inertial sensors and precision solenoids. Jewell Instruments provides custom solutions for a diverse group of industries, including aerospace, medical, industrial, telecommunications and many more. We serve industries ranging from aerospace, marine, communication and rail to various industrial applications. Our depth of applications experience, product knowledge and engineering expertise makes us the solution of choice. JMJJ Incorporated Johnstown, PA 15904-2815
Contact name:
Jim Kralik
Phone: 814 266-3106 URL:
www.jmjjinc.com
JMJJ Inc. is a small electrical assembly shop specializing in military and aerospace wiring harnesses and assemblies. JOG SYSTEM ENGINEERING, Inc. San Diego, CA 92122-3741
Contact name:
JEFFREY GRADY
Phone: 858 458-0121 URL:
http://www.jogse.com
System engineering consulting and training company providing a complete system engineering certificate program in four or six courses. Consulting to support near-term work needs. Johanson Mfg. Corp. Boonton, NJ 07005
Contact name:
Rocco Melchione
Phone: 973 334-2676 URL:
www.johansonmfg.com
Specializing in precision mechanical products for electronics industry: wireless,aerospace,medical,and automotive.Recognized world-wide for unsurpassed quality,service, and integrity. Jmc facilities located in: United States,Dominican Republic,Switzerland and Asia. State of the art technology and equipment enable JMC to control the product from design through manufacturing.Our extensive capabilities allow vertical integration,thus minimizing the need for outsourcing of component parts. This results in customer service that is responsive and agile.Our capabilities include: precision screw machining,precision plating,stamping,tooling,ceramic processing(pressing,sintering,and metallization),custom assembly,and high volume assembly. John Eppler Machine Works, Inc. Philadelphia, PA 19136
Contact name:
MATT STEHM
Phone: 215 624-3400 URL:
WWW.JOHNEPPLER.COM
JOHN EPPLER MACHINE WORKS, INC. LOCATED IN N.E. PHILADELPHIA, IS A FAMILY OWNED AND OPERATED SMALL BUSINESS. THE COMPANY WAS ESTABLISHED IN 1885 AND HAS BEEN AT ITS PRESENT LOCATION FOR 40 YEARS. WE ARE A CONTRACT MANUFACTURING AND FABRICATION COMPANY SERVING THE PHARMACEUTICAL, AEROSPACE, GOVERNMENT AGENCIES,POWER INDUSTRIES AND SPECIAL MACHINERY. WE EMPLOY APPROXIMATELY 20 PEOPLE IN OUR 35,000 SQ FOOT MANUFACTURING FACILITY. Jones Engineering & Manufacturing, Inc. Rose Hill, KS 67133-9719
Contact name:
BRENDA MCCORMICK
Phone: 316 755-1780 URL: We manufacture ground support equipment for military and commercial markets. Jones Metal Products Company, Inc. West Lafayette, OH 43845
Contact name:
Dan Erb
Phone: 740 545-6381 URL:
jmpforming.com
Short to Medium run Deep Draw Sheet Hydroforming and Stamping. Industries served are Aerospace, Defense, Lighting, Medical, Cookware, Automotive, and Locomotive. Jose Garcia Construction, Inc. Denver, CO 80260-5800
Contact name:
Jose Garcia
Phone: 303 429-3209 URL: General contractor doing commercial work. We specialize in new building, remodeling, additions, alterations, and tenant finish. We perform supervision, carpentry, drywall, labor, and concrete work. We have performed work for the Denver Federal Center, Fitzsimons Army Medical Center, Buckley Air National Guard, National Institute of Standards and Technology, National Center for Atmospheric Research, City and County of Denver, Lowry Air Force Base, Rocky Flats Plant, Rocky Mountain Arsenal and Denver Public Schools in the past. We have also performed work for private companies such as Coors Plant, Ball Aerospace, Rocky Mountain Metal Container, AT&T, and US West. We are dedicated to performing the work to the Owner's satisfaction and on schedule. Joseff-Hollywood Burbank, CA 91502-1922
Contact name:
Tina Joseff
Phone: 818 846-0157 URL:
joseff-hollywood.com
Foundry producing ferrous and non-ferrous investment castings for aerospace, medical, electronics, etc. Manufacturing castings for McDonnell Douglas since 1941. Currently approved by Lockheed Martin, Boeing Company, Honeywell. JSB Holdings, Inc. dba R&D Specialty/Manco Phoenix, AZ 85043
Contact name:
Linda R. Druse
Phone: 602 278-7700 URL:
www.R&DSPECIALTY.com
Aerospace Precision Machine Shop JWS Machine Inc. Brazil, IN 47834-6873
Contact name:
Jeff Stark
Phone: 812 442-0900 URL: JWS Machine is a Woman-Owned Job Shop Machine Shop. We specialize in Multi-Axis Machining and Swiss Machining. We run Prototype to Production. JWS services the Aerospace, Medical, Cryogenic and Defense industries. Our Quality system complies with ISO 9000. K & H Enterprises Ltd. Oklahoma City, OK 73150-2817
Contact name:
Harvey Hampton
Phone: 404 733-5489 URL: K & H Enterprises provides engineering and technical services to government and industry clients. We are highly skilled in the aerospace industry with extensive experience with aircraft modifications, maintenance, and operation issues. We can conduct studies, recommend solutions to problems, prepare requirement documentation, design modifications, prepare modification kits, prepare technical documentation, and provide engineering consultation.K & H also has extensive experience in National Aerospace Systems used guide and control aircraft. We have experience with weather, navigation, radar, landing, communication, and environmental systems. We can conduct studies, prepare modifications, conduct tests, and prepare documentations. K C Consulting Engineering Rolla, MO 65401-7739
Contact name:
Kirk Christensen
Phone: 573 647-6054 URL:
http://www.kc-propulsion
Develop aerospace propulsion system and component computer models. Includes steady-state design and off-design codes for gas generator, expander and staged combustion liquid rocket engines, air breathing/rocket based combined cycles, etc. Use third party codes such as NASA CEA. Component models include compressors, turbines, combustors, liquid pumps, inlets, nozzles, and heat exchangers. Propellants include cryogenic, hydrocarbon, and hypergolic liquid propellants and solid formulations. Evaluate propulsion system performance using vehicle trajectory simulations. Includes use of POST3D, Missile DATCOM, etc. K L H Industries, Inc. Germantown, WI 53022
Contact name:
Darrell Voigt
Phone: 262 253-4990 URL:
http://www.klhindustries.com
Progressive, Full Service Tool & Manufacturing, and Wire Electrical Discharge Machining Job Shop. Providing Total Machining Solutions at a Higher Level of Technology, Quality, and Performance. ISO 9002 Certified with Refined Processes and Capabilities to Provide the Vital Resources Needed to Exceed All Expectations with Respect to All Forms of Machining. Engineering and Consulting for 24 High Speed EDM Machines, Large Capacity CNC Machining Center, and Large Capacity Abrasive Waterjet. Large Work Envelopes With Weight Capacities To 10,000 lbs. Electronic Data Compliant with High End Software Systems. Types of Work Include: All Tooling Related to Molding, All Types of Die Work Including High Speed Progressive Dies, Protype, and Short and Extended Run Applications. Industry Sectors Served Include: Aerospace, Medical, Electronics, Automotive, Energy, Nuclear, Defense, and Consumer Products. Kapco / Valtec Ivoryton, CT 06442
Contact name:
Joe Ahern
Phone: 800 825-8321 URL:
www.kapcovaltec.com
Kapco / Valtec is a leading distributor of expendable seals, o-rings, packings, gaskets, clamps and couplings. We are one of the worldest largest suppliers of aircraft seals. Since our merger with Kapco we have expanded our product lines. We are now HPG, Boeing and Lockheed Licensed Distributors. All parts are Factory New and fully certified. Valtec has an accredited quality assurance system. We are QDL and ISO9002 certified. We accept Visa and Mastercard. Kavlico Corporation Moorpark, CA 93021
Contact name:
Lori Appel
Phone: +1 805 523-2000 URL:
www.kavlico.com
Kavlico manufacture pressure, position, force and other specialty sensors and transducers for military, commercial and aircraft, missle and sppace programs, automotive, power generation,. HVAC, on/off-highway applications and more. K-Chem,Inc. Birmingham, AL 35222-1915
Contact name:
Karen A. Halpern
Phone: 205 592-0844 URL:
www.k-chem.com
We have industrial and institutional chemicals such as degreasers, absorbents, penetrants, solvents, have chemicals for water treatment and waste water sewage plants, aerospace, electronics, maintenance, mil specs, janitorial, environmentally safe products, disinfectants, deodorants. We are HUBZone Certified, Woman Owned Business, and Small Business. We have specialty products such as oil dispersants, oil splitters, chemicals that biodegrade out oil in soil and on water. Floor restorers. We have a product that cleans 5-ton trucks, 5 KW generators, and motor pool bay areas, clean exterior of turbine engines and rotor areas and Army C-12 Fixedwing aircraft. We have silicones and much more. We have silicones, adhesives, nut and bolt looseners, demoisterants, sorbents, products that biodegrade out hydrocarbons from soil and from water ways, acids, insecticides, herbicides, solution centers, greases, coatings, automotive
and fleet maintenance, hand care, building maintenance, floor care products, deodorants, lubricants, and 1,1,1 replacement in both aerosol and liquid, and more. Kelly Space & Technology, Inc. San Bernardino, CA 92408
Contact name:
Karen V. West
Phone: 909 382-5644 URL:
kellyspace.com
Kelly Space & Technology, Inc. (KST) is a privately-held aerospace, defense, homeland security, testing and commercial products technology development company located at the San Bernardino International Airport (former Norton Air Force Base), in California. KST has established the Aerospace Research & Development Center (ARDC) at the San Bernardino International Airport to mature and deploy critical technologies that provide advancements in aviation, space, homeland security, energy generation and related technologies for both military and commercial system applications. Kenig Aerospace Plantation, FL 33313
Contact name:
Emily Mountcastle
Phone: 954 792-8911 URL:
www.kenigaero.com
Aerospace Metallic Raw Materials Distributor:Supplying Aluminum, Stainless, Titanium, Alloy Steels, Tungsten, Copper, Bronze, Brass in Rod, Bar, Extrusions, Shapes, Tubes, Sheet & Plate. Small Disadvataged Minority Owned Business since 1986. KENT ASSOCIATES INC Mansfield, TX 76063-2703
Contact name:
RICHARD GEIST
Phone: 817 473-2855 URL:
www.kentassocmfg.com
Manufacturers mechcanical structural components and assemblies, as well as Engine componets, for Military Aerospace Weapon Systems. Specializing in C-5, EC-10, KC135, F15, F16, A-10, T-37/38, F111. Kimmel Gerke Associates, Ltd. South Saint Paul, MN 55075-2637
Contact name:
William Kimmel
Phone: 888 364-4878 URL:
www.emiguru.com
Electrical Engineering consultants specializing in Electromagnetic Interference and Compatibility. Experts in emissions, susceptibility, EMI, EMC, ESD, EMP, FCC, RFI, and power disturbances. Work includes design, troubleshooting, testing, and seminars. Business areas include computers, telecom, medical, automotive, military, avionics, aerospace, and industrial electronics at the
board, equipment and facility/platform level. KineticSystems Company, LLC Lockport, IL 60441
Contact name:
Lin Zou
Phone: 514 633-7007 URL:
www.kscorp.com
KineticSystems designs, manufactures, and services high-performance data acquisition products and systems for the worldwide aerospace, automotive, and scientific laboratory markets. Products include: Sigma Delta A/D conversion products, Digital Data Recorders, Signal Conditioners, Programmable Signal Conditioners & Instrumentation Amplifier Systems, and compact, turnkey PC-based testing systems. Popular over the last 30 years for its wide array of standardized high-performance VXI, CompactPCI/PXI, and CAMAC modular products, KineticSystems continues to provide innovative new data acquisition products that suit their customers' evolving requirements. KINGS Electronics Co., Inc. Rock Hill, SC 29730-9063
Contact name:
Holli Mills
Phone: 803 909-5094 URL:
www.kingselectronics.com
Kings Electronics designs and manufactures Radio Frequency interconnection solutions for the Aerospace, Commercial, Military, Telecommunications and Broadcast markets. Kings RF connectors operate from 0 to 18 GHz in a variety of series including BNC, SMA, TNC, TRT, TRB, 440 Cross Connect modules, Type N, 7/16 and High Voltage connectors. Adapters, terminations, accessories and cable assemblies are also manufactured by Kings and available. Kings government approved parts are specified to military codes 39012, 55339, 49142 and UG-Type. K-JACK AERO INDUSTRIES, LLC Brea, CA 92821
Contact name:
LORIE POHL
Phone: 714 578-1700 URL: Aerospace machine shop. Quality system is currently AS9100 N/C. Capabilities include: 2-3-4-5 Axis machinin and assembly. Currently producing landing gear and wide array of structural components. Knowledge Workers, Inc ENGLEWOOD, CO 80112
Contact name:
Joe Weiner
Phone: 303 925-7524 URL:
KnowledgeWorkers.com
Knowledge Workers [www.KnowledgeWorkers.com] is a 20-year-old professional services firm
and a leading provider of human capital solutions, focused on bundling technology and services for recruiting and hiring. The philosophy is simple: provide strategy, direction, tactics, and technology in a way that aligns recruiting efforts with corporate strategic goals. Customer loyalty, quality service, and long-term relationships are hallmarks of Knowledge Workers engagements. Our success is rooted in three core elements that define Knowledge Workers: > People: Our dedicated and professional staff > Process: Our focus on efficiencies that maximize resources, dollars, and efforts> Technology: The underpinning of our services, providing comprehensive metrics and reportingKnowledge Workers Recruitment Managed Services suite is a unique bundling of technology and services that provides a true end-to-end recruitment solution. Recruitment Managed Services solutions are selected according to your individual needs, and include:> Planning and Process Improvement> Career Portals> Applicant Tracking Systems> Hiring Manager Interface> Hourly Hiring Interface> Best Practice Staffing> 21st Century Performance Reporting We have helped organizations in both the public and private sectors redesign and streamline recruitment processes to achieve superior return on their investments in hiring methods. From locations across the country, Knowledge Workers supports clients in the Aerospace, Banking, Defense, Emerging Technology, Healthcare, Information Technology, and Telecommunications industries. Kula Enterprises - Mill Basics Video Training Laguna Hills, CA 92654-2626
Contact name:
N Morris
Phone: 888 654-2468 URL:
kulaenterprises.com
CNC & Conventional Mill Machining Education, Consulting and Support for the Manufacturer, Training Facility, Machinists, Tool & Die Industry, Job Shops, Gun, Machine Manufacturers & Distributors.This in depth video, written by a prominent aerospace parts manufacturer, covers the critical principles of good machining practices with techniques few machinists have had the opportunity to learn. FOR the BUSINESS OWNER: Eliminate having to waste valuable time training and Re-training. Reduce Set-Up Times. Increase Productivity and PROFITS. Increase Shop Safety. This video covers the procedures Every operator should know before heading to the shop floor such as; -Indicating A Vise -Finding An Edge -Finding the Center of a Shaft Clamping down a Fixture -Collet and End Mill Holders and more!ARE PICTURES REALLY WORTH A THOUSAND WORDS.... we think it could mean thousands of dollars to your Bottom Line. Generally, people who have the most experience in a company (those who make the best candidates to act as teachers) are so valuable in their positions that they may not have the time or inclination to teach what they know to others. Video provides numerous advantages over conventional training methods. Kulite Semiconductor Products, Inc. Leonia, NJ 07605-2210
Contact name:
Stuart Kurtz
Phone: 201 461-0900 URL:
www.kulite.com
Kulite is the world's leader in piezoresistive pressure transducers. Our patented silicon-on-silicon sensing element allows for an extremely accurate, reliable, and rugged transducer to be built in an extremely small package. Kulite pressure transducers are well known in the Automotive, Aerospace, Defense, Marine, and Oil Exploration fields for their performance, innovation, and longetivity. Kyzen Corporation
Nashville, TN 37211-3106
Contact name:
Sherry Stepp
Phone: 615 831-0888 URL:
http://www.kyzen.com
Kyzen provides best in class precision cleaning chemistries for electronics, advanced packaging, metal finishing and aerospace applications. We offer a broad range of process solutions ranging from hand wipes and sprayable aqueous cleaning formulations to engineered vapor degreasing solvents. All of our products are environmentally friendly and effective in virtually all cleaning systems. Kyzen operates two fully equipped cleaning applications centers where we test nearly 300 soldering materials from the worldâ&#x20AC;&#x2122;s leading suppliers. Our lab is also available for customer process development. Our goal is to provide our customers with integrated cleaning SOLUTIONS! L.J.F. Industries, Inc. ONTARIO, CA 91761
Contact name:
JAMES A. ALTIER
Phone: 909 923-8774 URL:
N/A
INDUSTRIAL DISTRIBUTOR OF CUTTING TOOLS AND FLUIDS. WE MANUFACTURE BLUE PRINT SPECIALS ALONG WITH MODIFICATIONS AND SHARPENING SERVICE. WE HAVE OVER 60 YEARS EXPERIENCE IN THE CUTTING TOOL INDUSTRY. WE ARE MINORITY WOMAN OWNED. L-3 Communications Avionics Systems, Inc. Grand Rapids, MI 49512-9704
Contact name:
Bill Ferguson
Phone: 616 949-6600 URL:
www.L-3com.com/as
L-3 Communications Avionics Systems is a global leader in the manufacturing of safety-related systems for the aerospace industry. These products serve operators of general & business aviation, air transport and militaryaircraft around the world. L-3 Avionics Systems has a full line of aircraft collision avoidance, lightning detection, terrain awareness, display systems, electro mechanical gyros, electronic solid state standby systems, power conditioning, flight controls, and TACAN navigation products. LAM Manufacturing Rancho Santa Margarita, CA 92688-1426
Contact name:
Luis A. Martinez
Phone: URL: LAM Manufacturing, LLC provides Aerospace, Commercial, and Industrial customers complete electronic systems solutions through customized applications, design and engineering services for interconnect systems and high-reliability assemblies. LAM Manufacturing, LLC is a single
provider offering complete installation kits provisions, engineering services and comprehensive installation support for the Aviation , Military, Marine and Transportation industries. LaMachine Shop Inc. HAM LAKE, MN 55304-5535
Contact name:
Joe LaBonne
Phone: 763 434-6108 URL:
www.lamachineshop.com
We are a precision machining job shop. We perform both CNC turning adn CNC milling as well as Swiss style machining. Machined materials include stanless steels, steels, alloys, brass, aluminum, plastics and others. We are a certified supplier to many industries including Medical, Defense, Aerospace, food service and industrial. LAMSCO WEST Valencia, CA 91355
Contact name:
G BALDWIN
Phone: 661 2958620 URL:
www.lamscowest.com
Lamsco West is a small California company (a division of the Compass Aerospace Corporation) employing approximately 70 people with yearly sales exceeding ten million dollars. Lamsco has operated continuously as a manufacturer in California since 1961. Landing Gear Test Facility Wright-Patterson AFB, OH 45433-7202
Contact name:
JAMES G MCCLAIN
Phone: 937 255-1609 URL:
assf.wpafb.af.mil
Comprehensive landing gear testing services, specializing in military aerospace, NASA, and commercial aviation testing. Services include aircraft tire durability testing, aircraft tire tread wear testing, aircraft wheel and brake qualification testing, landing gear impact and simulated ground loads testing, landing gear shimmy testing, integrated landing gear dynamics testing, landing gear durability and fatigue testing, aircraft and truck tire non-destructive inspection. LAYKE INC PHOENIX, AZ 85017-4810
Contact name:
Ernest J. Apodaca
Phone: 602 272-2654 URL:
laykeincorporated.com
Layke Inc. has been in business in Phoenix Arizona for the past (54) years.Layke is a Precision Aerospace Macnine Job Shop manufacturing parts with the use of CNC Milling Machine Centers, CNC Turning Centers, Manual lathe, mills, flat lap, grinding, pressure testing, marking, assembly, etc.ISO 9001:2000 & AS9100:2001 Third party certified by Perry Johnson Registrars.
Layke, Inc. Phoenix, AZ 85017-4892
Contact name:
Ernest Apodaca
Phone: 602 272-2654 URL:
http://www.laykeincorporated.com
Precision Aerospace Job ShopMachining with CNC mills, CNC Lathes, Manual milling and lathes.LapSurface grindPressure TestSome assemblyAS9100 & ISO/2002 thrird party certified Leach International Buena Park, CA 90620
Contact name:
Dave Abend
Phone: 714 736-7598 URL:
http://www.leachintl.com
Manufactures and supplies: mil-qualified subminiature and miniature relays; DC contactors to 1000 amps; AC contactors to 90 KVA; time delay relays, voltage, current and frequency sensors, including Hall effect current sensors; solid state relays and solid state power controllers; integrated switch panels, keyboards, illuminated switchlights and indicators, central warning systems, anti-icing controllers, and accessories. Provides value-added Electrical Power Distribution Assemblies (EPDAs) incorporating the latest switching technology. Lectroetch Co. Sheffield Village, OH 44054
Contact name:
D. A. Badt
Phone: 440 934-1249 URL:
www.lectroetch.com
LEE COMPANY THE Westbrook, CT 06498-1500
Contact name:
Gillian Russo
Phone: 860 399-6281 URL:
www.theleeco.com
For over 60 years, The Lee Company has pioneered the development of miniature fluid control components for aerospace hydraulic and fuel systems, medical and scientific instrumentation, oil tools, industrial hydraulics, inkjet printing, and other industries worldwide.Lee's unique capabilities in miniaturization and engineering expertise keep the company at the forefront of fluid flow technology, and enable it to work effectively with customers to solve difficult fluid control problems. Limco Airepair, Inc. Tulsa, OK 74107
Contact name:
Lynn R. Grimm
Phone: 918 445-4300 URL:
www.limcoairepair.com
Manufacture, repair and overhaul of Aerospace Heat Exchangers, Oil Coolers and Ducting. We also manufactureground based Air Conditioning systems and SF6 gas storageand reclaiming systems and Demineralizers. LINDBERG Watertown, WI 53094
Contact name:
Patrick Weymer
Phone: 920 262-3814 URL:
www.heat-treat.com
Lindberg is a major manufacturer of industrial, light industrial, and laboratory heat processing products for the aerospace, automotive, ceramic, education, electronics, fabricated metal, government, machinery, medical, and powdered metal industries. Our products include integral quench, box, continuous, and pit furnaces and ovens, and furnace peripheral equipment including transfer cars, and atmosphere generators. Linread Northbridge Leicester, LE LE18 2BL
Contact name:
Matt Oldfield
Phone: 44 2572945 URL:
www.linreadnorthbridge.com/leicester
Manufacturer Of Aerospace components,Bolts & Fasteners primarily for use in Aircraft Engines. Key customers includeGE,RR,P&W and Airbus. LKD Aerospace Issaquah, WA 98027
Contact name:
Kristy Chamberlain
Phone: 425 391-0229 URL:
www.Lkdaerospace.com
Interior Aircraft parts LME INC Annapolis, MD 21409-5216
Contact name:
Stuart F. Hall
Phone: 410 7576319 URL:
http://www.lmeinc.com
LME, Inc. is a small veteran-owned business that has been providing engineering, logistics, and management services to the DoD for aerospace systems for over 35 years. We specialize in aviation life support equipment design and support, missile acquisition logistics, and weapon system integration and support. LMI Aerospace, Inc..
St. Charles, MO 63302-0678
Contact name:
Ted Kretschmar
Phone: 636 946-6525 URL:
www.lmiaerospace.com
LMI Aerospace, a leading supplier of quality components to the aerospace and technology industries for 55 years, operates thirteen facilities that fabricate, machine, finish, integrate, assemble and kit formed, close tolerance aluminum and specialty alloy components for commercial, corporate, regional and military aircraft, laser equipment used in the semiconductor and medical industries, and for the commerical sheet metal industries. Long-Lok Fasteners Corp. Cincinnati, OH 45215
Contact name:
Juanita Kuuttila
Phone: 513 772-1880 URL:
www.longlok.com
Manufacturer of military and commercial prevailing torque type self-locking and self-sealing fasteners. Product lines include Long-Lok nylon, Vespel and Kel-F strip and pellet, Poly-Lok high temperature polyester patch, all-metal Dyna-Thred II, Loctite Corporation pre-applied adhesives and sealants, T-Sert threaded inserts, Omni-Lok and Dual-Lok. Selected self-locking features can be applied to externally and internally threaded parts as well as custom components. SelfSeal fasteners have an O-ring under the head with an engineered groove to seal fluids either in or out of a system. This company will develop custom fastening products or processes to work directly with your specialty components. Lovejoy Chaplet Corp. Hoosick Falls, NY 12090-1815
Contact name:
Peter Mcguire
Phone: 518 686-5232 URL:
www.lovejoychaplet.com
Lovejoy Chaplet Corporation has been providing precision-machined products on a contract basis for various industries throughout the world since 1911. Lovejoy specializes in the manufacture of turned and milled parts with intricate geometries often requiring multiple machining operations, produced in short to medium production runs and delivered in a Just-in-Time manner to the highest quality levels.Lovejoy Chaplet has consistently been a leader in the machined products industry with respect to the implementation of new technologies, techniques, equipment and management systems. We have embraced the use of Lean Manufacturing, 5S organizational techniques, CNC machining technology, robotics, lights-out manufacturing and SPC inspection methods since the early 80's. Lovejoy operates single spindle turning equipment, and high speed machining centers enabling it to be competitive on production runs of 50 to 100,000 pc. while working in virtually all materials.ISO 9000:2001 certified by international registrar NSF-ISR, quality continues to be a key element in the company's success. Embracing quality techniques of 5S, continual process improvement, SPC and vision inspection, has allowed Lovejoy Chaplet to maintain product quality at world-class levels. LuBo America, Inc. Lincolnwood, IL 60712-1710
Contact name:
Juno Kang
Phone: URL: http://www.luboinc.com/ Manufacturer of various types of sleeve bushings, such as plain metal bushings, self-lubricating bushings, non-metal bushings for General Industrial machinery, aerospace/automotive, marine, heavy machnery, and bridge/construction. LUB-O-SEAL CO, INC. CYPRESS, TX 77410-0246
Contact name:
Mark Kirchgessner
Phone: URL: http://www.Lub-O-Seal.com Mfg and Dist of industrial and aerospace lubricants, sealants and adhesives. Mil-A-907, Mil-T5544, Mil-T-22361, MIL-T-83483, VV-P-236, VV-L-800, CID-A-A-59313 and many more. Lucix Corporation Camarillo, CA 93012-8758
Contact name:
Chris Rebbe
Phone: 805 987-3677 URL:
www.lucix.com
Lucix Corporation designs and manufactures Dielectric Resonator Oscillators (DROs), MIC Component Amplifiers from 10 MHz to 45.0 GHz, Upconverters, Downconverters, Tranceivers, Switched DRO Assemblies, MIC Subsystems in the frequency range of 4.4 GHz to 44 GHz. Lumar Ă&#x2030;lectronique Inc. Dorval, Qu H9P 2P4
Contact name:
Catherine Gratton
Phone: 514 633-9940 URL:
www.lumar-elect.com
Our company was established in 1988, through these years we've come across great technical projects for the hydro power industry, robotics, telecommunications, marine, aerospace. As a subcontractor we have helped great companies achieve their goals with high quality products and on time deliveries. Lumar electronics covers a variety of products related to electrical engineering. Manufacturing of electronic assembliesControl panels Mechanical assembliesChassis cabling and wiringMulticonductor cablesCable harnessesCoaxial cable assembliesSemirigid semiflex cable assembliesHeliax cable assemblies Lytron Incorporated Woburn, MA 01801-1039
Contact name:
Nancy J. Conti
Phone: 781 933-7300 URL:
www.Lytron.com
Lytron designs and manufactures custom high performance heat exchangers, cold plates, and cooling systems. Our heat exchanger technologies include vacuum brazed plate-fin as well as tube-fin. Our cold plates technologies include vacuum brazed, flat tube, and tubed. Our development engineers have extensive heat transfer, fluid dynamics, and material analysis experience. Also supporting the design process are analytical tools, solid modeling software, and an empirical database with 40 years of data. Complete vibration and shock system qualifications are available on most of our components. M & Q Packaging Corporation Schuylkill Haven, PA 17972-9746
Contact name:
Shannon Gaverick
Phone: 570 385-4991 URL:
www.mqplastics.com
Manufacturer of high-temperature plastic products (bags, film, and sheet) serving clients in diverse industries such as food preparation (400F oven safe), foodservice (PanSaver oven pan liners and Scrub Saver steam table safe), food storage (cook-chill casings and supplies), YieldMaster meat processing casings, medical and dental sterilization, cleanroom, industrial (drum liners, solvent recovery bags, pipe liners, environmental waste disposal bags), and aerospace. All manufacturing performed at our ISO 9001:2000 Pennsylvania facility. Certifications include: ISO, NSF, Kosher, CFIA. Products available worldwide. M &M International Aerospace Metals, Inc. Holly Hill, FL 32117
Contact name:
Tina Muldoon
Phone: URL:
M T I Electronics, LLC NEWBURY PARK, CA 91320-1103
Contact name:
DR DONALD E. DAVIS
Phone: 805 375-5665 URL:
M&M International Aerospace Metals, Inc. Ft. Lauderdale, FL 33309-1963
Contact name:
Tina Muldoon
Phone: 954 977-6335 URL:
www.mmaerospacemetals.com
M&M International Aerospace Metals, In. Is a certified Minority and women owned small business.Our inventory cosists of aluminum,stainless steel,alloy steels,hight temperature nickel and Titanium.ISO9001 and AS9100 Certified company.
M.R.Research Centennial, CO 80122
Contact name:
Dr. Reinaldo Perez, PE
Phone: 303 977-5845 URL:
www.m-r-research.com
Electronics, aerospace, medical, and telecommunications Engineering service company. Provide engineering design of PCB, ASIC, FPGA, RF, MW circuits using EDA, CAD, CAM methods. Reliability engineering analysis including; failure modes effects (FMECA), PRA (reliability prediction), parts derating or stress analysis, worst case analysis. Antenna design and development. Electromagnetic interference and compatability.Telecommunication and wireless designs.Educational services for enginnering and project managements. M/A-Com, Inc. Lynchburg, VA 24501
Contact name:
Mike McPhatter
Phone: 434 455-9234 URL:
www.macom-wireless.com
M/A-COM, Inc., a business unit of Tyco Electronics, is a leading supplier of critical communications systems and equipment for public safety, utility, federal and select commercial markets. Products range from some of the most advanced IP-based voice and data networks, to traditional wireless systems that offer customers the highest levels of reliability, interoperability, scalability and security. M/A-COM is also a recognized leader in the design and manufacture of radio frequency (RF), microwave and millimeter wave solutions for the commercial wireless telecommunications, aerospace and defense industries. Headquartered in Lowell, MA, M/A-COM has offices and manufacturing facilities worldwide. Information about M/A-COM can be found on the Web at www.macom.com or www.macom-wireless.com. M+P INTERNATIONAL INC Verona, NJ 07044-1729
Contact name:
AL PROSUK
Phone: 973 2393005 URL:
www.mpina.com
m+p international is a system and software provider for noise and vibration applications. Experimental data acquisition, control and analysis solutions are available for the defense, aerospace and automotive industries. Mabels Prototyping and Coffeeshop SAINT PETERSBURG, FL 33706-5077
Contact name:
Floyd Roberts
Phone: 727 642-3747 URL:
www.mables.biz
Research and Development Firm for Aerospace Prototyping (mechanical), Coatings,and Paints
MAC Industries LLC Salt Lake City, UT 84123-3616
Contact name:
Zina Kiryakos
Phone: 801 268-2577 URL:
macindustries.com
Mac Industries is a growing business presently providing precision machined and fabricated components for the Military, Aerospace, Medical and Commercial Industries since 1986. We are interested in expanding our services to you, and seek opportunities for CNC and Conventional Machining, as well as Fabrication work. Please see page 2 for information on our facilities and capabilities. Our Quality Management System complies with the requirements of ISO 9001:2000 and is registered by BSI Management Systems. Quality Assurance Manuals and Welding Certifications are available upon request.We pride ourselves on our service, timely delivery and our commitment to quality. Our shop rate is very competitive and we would appreciate the opportunity to quote on your projects.We would like to thank you for your time, and we look forward to being of service to you in the near future. Machine Technology, Inc. Fenton, MO 63026
Contact name:
Randy Gunn
Phone: 636 349-7680 URL:
www.mach-tech.com
Machine Technology is a quality oriented manufacturer of precision machine parts. We specialize in medical and dental instruments and components, aerospace, ground support, automotive, and hydraulic industries. We have highly experienced personnel and we are constantly updating our manufacturing processes and equipment. From prototyping to short-run applications to long-run production, we can service your machining requirements. MacKenzie Aircraft Parts, Inc. Vista, CA 92081
Contact name:
Toni MacKenzie
Phone: 760 727-3775 URL:
www.macairparts.com
Supplier of OEM hardware and commercial and military aircraft and helicopter spares. Spare parts are listed on ILS database or at PartsBase.com. Parts for DC10, 747,737, L1011, etc. Cargo Planes: C130, C141, C5, Jets and Helicopters. Large inventory switches, connectors, relays, bearings, nuts, bolts, rivets, vales and more. ISO 9001:2000 certified. MacMar, Inc. Burbank, CA 91506-1751
Contact name:
Larry McAuley
Phone: 818 566-8302 URL:
www.MacMarInc.com
Architcetural and Engineering Services for commerical, residential,industrial,institutional;and City, County, State and Federal Governments. Special expertise in single & muti-family housing, clean rooms, secure rooms, sound recording and editing rooms, healthcare facilities, and aerospace facilities. MACSEMA, INC. Bend, OR 97701-5890
Contact name:
Rose Sellew
Phone: 541 389-1122 URL:
www.macsema.com
MacSema, Inc. manufactures ButtonMemory, contact memory buttons (CMB) with up to 1GB of battery-free data capacity. Uses include manual storage, configuration management, electronic maintenance logbook, and life cycle asset tracking and life-limited component management. Capable of storing technical manuals and schematics as well as tracking cradle to grave history. MacSema also manufactures a line of rugged, portable, bar code and Button readers. Asset tracking and maintenance software, programming tools and technical support available. Manufactured in the U.S.A. Magchem Inc. Boucherville, Qu J4B 5Z5
Contact name:
Jim Goldsbrough
Phone: 450 655-1344 URL:
www.magchem.com
MagChem is a company founded in 1946, developing, manufacturing and marketing highly specialized products, encompassing surface finishing, metalworking lubricants and water conditioning. Carrying a full line of products, MagChem is characterized by developing products responding to specific customer needs.MagChem is a founding member and strategic partner of the Aerochemical alliance.www.aerochemicals.com Magellan Aerospace Corporation Mississauga, On L4T 1A9
Contact name:
William Matthews
Phone: 905 677-1889 URL:
www.magellanaerospace.com
Magellan Aerospace Corporation is one of the world's most integrated and comprehensive aerospace industry suppliers. Magellan designs, engineers, and manufactures aeroengine and aerostructure components for aerospace markets, advanced products for military and space markets, and complementary specialty products. Magellan is a public company whose shares trade on the Toronto Stock Exchange TSX: MAL), with operating units throughout the United States and Canada. MAGNECOMP INC Pickens, SC 29671-0625
Contact name:
TIM SULLIVAN
Phone: 864 878-4700 URL:
http://www.MagneCompInc.com
Design and Manufacture Transformers and Inductors for Aerospace, Industrial, and Military applications.Power to 5Kva 400Hz, 1Kva 50/60Hz, Hi voltage isolation to 20,000Vrms, Corona free.Pulse, Triggen, Saturable Reactors,Scott-T transformers Laminated, Toroidal. Magnecomp Inc. Pickens, SC 29671
Contact name:
Tim Sullivan
Phone: 864 878-4700 URL:
www.MagneCompInc.com
Manufacturer and Designer of Transformers and Inductors for Aerospace Military, and Industrial applications.We design to specification drawings or your circuit requirements. We design and redesign units which are out of production or otherwise unavailable.The MagneComp engineering staff has been designing and manufacturing transformers and inductors for these applications for over 35 years.We have expertise in Scott-T transformers,high accuracy ratio transformers, transformers for isolating high voltages up to 20,000 volts and tested to be corona free,as well as magnetic amplifirr, and many other types of transformers and inductors up to 2KVA power levels. Magnetic Design Labs, Inc. Santa Ana, CA 92705-5020
Contact name:
Kamran Kazem
Phone: 714 558-3355 URL:
www.magneticdesign.com
Designer and Manufacturer of Leading-Edge Power Electronics Products: Switching and Linear Power Supplies, Power DC-AC Sine Wave Inverters, DC-DC Converters, LVDT Transducers, Magnetic Amplifiers. Products are ruggedized and Hi-Reliability. We sell to Military and Commercial markets. Magnetics Pittsburgh, PA 15238-0422
Contact name:
Kimberly Holcombe
Phone: 412 696-1300 URL:
www.mag-inc.com
Since 1949, MAGNETICS, has been a leading world supplier of precision, high quality magnetic components and materials to the electronics industry. We specialize in research, design, and production of a broad range of high-quality magnetic cores for applications such as chokes, inductors, filters, transformers, and power supply components for end use in telecommunications, aerospace, military, computer, medical, and other electronics systems. Staffed with a high degree of technical talent, and having modern research facilities, MAGNETICS has followed a carefully charted course to find and fill specialized industrial needs, while at the same time pioneering many new products, designs, and manufacturing innovations. Many of these developments have resulted in acceptance as industry standards in tape wound cores, powder cores, and ferrite cores--all products of MAGNETICS.MAGNETICS places a strong emphasis on technical knowledge. Research and development aimed at improving existing products and introducing new materials and geometries, has made MAGNETICS an innovation leader in the soft magnetic
industry. And with one of the largest Application Engineering staffs in the industry, MAGNETICS is able to provide technical assistance for any design challenge. Magnolia Plastics, Inc. Atlanta, GA 30341-2296
Contact name:
Rick Wells
Phone: 770 451-2777 URL:
www.magnoliaplastics.com
Since 1957, Magnolia Plastics has been providing High-Performance Epoxy Systems worldwide serving diverse industries including: Aerospace; Civil Engineering; Communications; Defense; Electronics & Electrical; Energy; Industrial & Other; Marine & Maritime; Sports & Recreation; and Transportation. Magnolia produces a variety of innovative, bromide-free epoxies including: Adhesives (Aerospace, Structural and General Purpose); Syntactics; Composite and Composite Repair Resins; Electrically and Thermally Conductive Epoxies; Potting and Encapsulating Epoxies; and Tooling Resins. Custom-Formulated and Custom-Packaged Epoxy Systems are available. AS9100 Certified. Magparts Azusa, Ca 91702-3241
Contact name:
Robert Bates
Phone: 626 334-7897 URL:
www.magparts.com
MAGPARTS is a well-organized foundry operation located in 100,000 square feet of buildings on approximately three and a half acres of land in the city of Azusa, California, twenty miles east of Los Angeles. We produce premium quality magnesium and aluminum castings.Our modern aluminum sand foundry has over 33,000 square feet of manufacturing space with melting capacity of up to 20,000 pounds per day. This recently completed facility includes both dry sand and green sand molding systems. Castings from ounces to as heavy as 125 pounds net weight can be produced. Our permanent mold foundry has been combined with the new sand foundry to gain efficiency in our melting operations and share the advantages of our new core making operations. The magnesium sand foundry has a melting capacity of 10,000 pounds per day. The foundry includes both green sand and dry sand molding operations.The investment foundry is housed in 6,500 square feet. We are capable of pouring aluminum and magnesium investment castings up to 20 pounds net weight and approximately 24 square inches in size. We presently cast many different aluminum alloys that include A201, A206, A356, 356, A357, F357, C355, 319 and 535. We have made significant mechanical strength advancements in the A201 alloy.We presently cast magnesium alloys AZ91C, AZ91E, AZ92A, EZ33A, ZE41A, and QE22.Approximately 90% of MAGPARTS business is done with major aircraft, aerospace and defense companies. MAGPARTS Quality system is certified to ISO 9001 and AS9100 in addition to NADCAP approval for heat treat and mechanical testing. _____ Magparts, A California Corporation AZUSA, CA 91702-3241
Contact name:
Robert Bates
Phone: 626 334-7897 URL:
www.magparts.com
Magnesium and aluminum castings are poured using sand (green and dry), permenent mold, and investment methods. Magparts is an aerospace foundry, also specializing in vein work and air moving equipment. Castings as large as 120 lbs.plus are poured in sand. Our investment foundry can produce castings (aluminum and magnesium) up to 25 lbs. within a volume of two feet cubed. Permanent mold, up to 75 lbs. Check our website for additional services. MAK Products & Distribution Rubidoux, CA 92509
Contact name:
Rose Kaczmarek
Phone: 909 781-6076 URL:
www.makenvironmental.com
Environmental Chemical Alternatives: Specialty Chemicals, solvent replacements, hazard cleanup, packaging/corrugated/plastics/containers/custom design & UN Packaging.Partners for a cleaner future, safe work practices that reduce workers exposures to hazardous chemicals. Working with industry sectors to compare and improve the performance, human health, environmental risks and costs of existing and alternative products, processes and practices. We promote integrating cleaner, less expensive and smart solutions into everyday business practices. Serving the Aerospace industry and US NAVYWe provide products and services that will improve and preserve our quality of life. Make-Way Machine, Inc. Seabrook, NH 03874
Contact name:
Kevin Fritz
Phone: 603 474-5250 URL: We specialize in production as well as prototype machining, particularly milling, turning and surface grinding. As a supplier to a variety of fields including but not limited too the Aerospace, Communications, Electronics, Semiconductor, Medical and Food Service Industries using a broad range of materials including exotic metals and plastics. We have been in business since 1985 and believe in a working partnership with our customers, your satisfaction is our number one priority. MANUFACTURING AUTOMATION & SOFTWARE SYSTEMS Chatsworth, CA 91311
Contact name:
Gamal Balady
Phone: URL: http://www.massgroup.com Company ProfileManufacturing Automation Software & Systems Group - MASS Group, Inc. - is a single source supplier for automation software, hardware, and engineering services for aerospace, automotive, semiconductor, electronics, food & beverage, chemicals, energy, petroleum and utilities markets. Software SolutionsThe company is a leader in providing comprehensive shop floor to top floor factory automation products, expert consulting, support services, and training for PC based control, Semiconductor Wafer Reclaim Management, CMMS, HMI, SCADA, MES, SPC/SQC, CRM, ERP, RF networking and warehouse management software to industrial automation and manufacturing markets.Industrial Automation HardwareMASS Group provides high quality automation, control and Auto ID products including,
industrial 2d part marking lasers, 2D part scanners, barcode scanners, barcode printers, mobile computers, and RF wireless networking for industrial environments. Many of the products we offer can be used to enhance aspects of manufacturing and logistics, and solve other unique problems for vertical markets such as hospitality, food and drug, and healthcare. MASS Group specialty technology products are ideally suited for use in rugged environments and extremes posed by parts manufacturing, electronics, food and beverage processing and semiconductor fabrication. MASS Group provides wireless LAN, barcode scanners, and mobile computers to enable mobile workforces to work in real-time. By improving the tracking ability of equipment, assets and inventory our hardware and software products are enabling todayâ&#x20AC;&#x2122;s manufacturer to be more competitive in global markets. Engineering Services MASS Group, Inc. specializes in integrating technologically advanced factory automation software and hardware through cost effective engineering services for a wide range of industrial manufacturing processes. Our engineering services enable customers to increase the efficiency of operations by simplifying and reducing the time required in evaluating, buying and implementing integrated manufacturing software applications and tools. We provide high quality, industry standard services backed by a network of highly skilled engineers trained in the latest automation technologies. Maris Systems Design, Inc. Spencerport, NY 14559-1931
Contact name:
JERRY GERACI
Phone: 585 352-8230 URL:
http://www.marissystems.com
We design and build special machines and automation equipment. Lean cells, power and free conveyors, dials, robotics, material handling, packaging, testing, inspection, assembly, machining equipment, etc.. We service the automotive, pharmaceutical, consumer products and aerospace industries. We handle anything from simple fixtures up to highly intricate automation systems. See a 6 minute video on our web site (http://www.marissystems.com)that highlights some of the equipment that we've recently designed and built. Special machinery is our specialty! Master Machine (Windsor) Ltd. Oldcastle, On N0R 1L0
Contact name:
William Bolton
Phone: 519 737-6111 URL:
www.mastermachineltd.com
Custom Contract CNC Machining services utililizing 2, 3, 3 plus 1 and 3 plus 2 axis machining technics. Full sculptured surfaces that require CAD/CAM cutter path and CNC machining. In house Boring Mill services. 500 ponuds up to 100,000 pound capacity. Finish Componant supplier. Custom Design & Manufacturing capabilties that include wide variety of products. Experienced Design and Manufacturing in CNC Machine Tools, Fixtures, Injection Molds, Compression Molds, Pinch Trim Tools, Retrofitting & Rebuilding of Machinery and Consulting. MasterSource Co., Inc. Akron, OH 44306
Contact name:
Diane Marsh
Phone: 330 794-8700 URL:
NA
Metal distributor supplying ferrous and non-ferrous materials in all forms. Over 15 years experience supplying the aerospace industry and military/defense. Specialize in the difficult and unusual items but also stock 1018 and A36 round and flat bars and 1045 round bars. MAX LEVY AUTOGRAPH INC PHILADELPHIA, PA 19144-4211
Contact name:
Thomas Cinque
Phone: 215 8423675 URL:
www.maxlevy.com
Max Levy Autograph specializes in ultra-precision patterned optical, mechanical, microelectronic components and NIST traceable metrology and calibration standards up to 3' x 10'. Major manufacturing process capabilities include: photolithography, electroforming, photochemical etching, film products, micro-contouring/machining, and calibration services. Maxwell Technologies, Inc. San Diego, CA 92123
Contact name:
Steve Obedoza
Phone: 858 503-3300 URL:
www.maxwell.com
Maxwell is a leading developer and manufacturer of innovative, cost-effective energy storage and power delivery solutions. Our BOOSTCAP速 ultracapacitor cells and multi-cell modules and POWERCACHE速 backup power systems provide safe and reliable power solutions for applications in consumer and industrial electronics, transportation and telecommunications. Our CONDIS速 high-voltage grading and coupling capacitors help to ensure the safety and reliability of electric utility infrastructure and other applications involving transport, distribution and measurement of high-voltage electrical energy. Our radiation-mitigated microelectronic products include power modules, memory modules and single board computers that incorporate powerful commercial silicon for superior performance and high reliability in aerospace applications. Mayady Manufacturing Co Inc DENTON, TX 76207
Contact name:
Joe Kaszynski
Phone: 940 898-8301 URL:
www.maydaymfg.com
Manufacturing of precision aerospace components including bushings, pins, and spacers. MCGEAN-ROHCO INC Cleveland, OH 44105-3010
Contact name:
PATRICE LALLEMENT
Phone: 216 341 URL: www.mcgean.com Cee-Bee takes pride in its many years of product service to the commercial and military aviation industry. Originally established as a supplier of industrial products, Cee-Bee has expanded
through continuing research and development into many areas related to production and maintenance of aircraft. For more than 50 years, Cee-Bee products have helped the industry meet the demanding requirements in all aspects of aircraft maintenance, manufacture, and overhaul. Among finely developed products available from Cee-Bee are engine overhaul products, interior and exterior cleaners, lavatory care products, and paint strippers. Cee-Bee's customers receive the best quality products backed by research and service. Cee-Bee aviation products help commercial airlines, military, aerospace, and original equipment manufacturers meet the demanding requirements of the aviation industry. All products are tested against aviation industry specifications. These products are also designed to be environmentally friendly and help meet environmental regulations. Cee-Bee cleaners are available for most aviation applications from cleaning aircraft exteriors to removing difficult soils to cleaning sensitive alloy surfaces. Cee-Bee lavatory care products help maintain clean and odor-free lavatories while maintaining functionality. Cee-Bee engine overhaul products are designed to safely remove scale and soils from turbine blades and other engine components. Cee-Bee paint strippers are designed to quickly remove paint from aircraft and aircraft components without damaging the underlying metal or damaging the environment. M-Dot Aerospace Phoenix, AZ 85040-1939
Contact name:
B. J. Taylor
Phone: 480 921-4128 URL:
www.m-dot.com
Mechanical Engineering and Manufacturing of turbine products Mecanum inc. Sherbrooke, Qu J1K 0A2
Contact name:
NOUREDDINE ATALLA
Phone: 819 563-3317 URL:
www.mecanum.com
Mecanum Inc. is a software development and consulting firm committed to finding and bringing innovative solutions to Automotive, Aerospace and building Industry noise and vibrations problems through advanced analytical, numerical and experimental expertise. Mecanum Inc. also offers various services related to noise control ranging from classical tests and simulations to advanced and complete turn-key projects and products.Mecanum's primary mission is the development of the most comprehensive vibro-acoustic prediction tools and the design of the most advanced sound packages for the automotive, Aerospace and building Industries. Both internally and externally funded research in porous materials modeling and experimental characterization lead to the development of the company’s NOVA™ and FOAMX™ software products together with advanced equipments for fine characterization of the acoustic and mechanical properties of Porous materials. Both software are commercialized by ESI-group, the developer of AUTOSEA2 and RAYON vibro-acoustics software. Please visit Mecanum's web site for details: www.mecanum.com Mechanical Specialties Co. Binghamton, NY 13904
Contact name:
Eugene Mazza
Phone: 607 723-1105 URL:
www.mechspecial.com
Specializing in Prototype and Short-run production of parts to print. We work with many industries, primarily Aerospace and Medical/Surgical Tooling for Spinal and Orthopedic Implants. ISO 9001:2000. We prefer small quantities and will work with single unit interests!! Machines include CNC, Lathes and EDM (wire and ram) Meco Inc Paris, IL 61944
Contact name:
W P MAGERS
Phone: 217 465-7575 URL: Precision metal fabrications and machined components for gas turbine engines and aerospace applications. MEG TECHNOLOGIES INC LONG BEACH, CA 90804-1020
Contact name:
TAMMY A BUCK
Phone: 562 986-5500 URL:
http://www.mtifast.com
ISO 9000 certified. Woman-owned, small, disadvantaged distributor of aerospace and commercial fasteners. Carrying large certified inventory of inserts,nuts, bolts, screw, rivets, bushings, clamps, bearings, fittings, washers, andmore. Authorized distributor for Avdel Cherry Textron. Meggitt-Oregon MCMINNVILLE, OR 97128-0887
Contact name:
Darci Ancalade
Phone: 503 472-0045 URL:
www.meggittsilicone.com
manufacture of flexible aerospace products Mercury Electronics Div of DTP Incorporated York, PA 17405
Contact name:
Dan Snyder
Phone: 717 854-9557 URL:
www.mercuryelectronics.com
Contract manufacturer of custom electrical assemblies. Low or high volume. Products include: Harnesses, Panels, Consoles, Cables, Coaxial, Ribbon, Battery, Power, RF, Shielded, Data, Miniature, Communications, Temperature Sensors. Services include: Assembly, Crimping, Cut/Strip/Terminate, Ultrasonic Splicing, Inkjet Marking, Hot Stamp Marking, Shrink Tube Marking, Potting, Braiding, Soldering, Kitting, Engineering, AutoCAD. Industries include; OEM, Industrial, Military, Commercial, Aerospace, Transportation, HVAC, Medical, Marine, Entertainment, Gaming, Communications, Security, Construction. Modern 27,000 SQ FT facility, in business since 1946, UL, CUL
Merle Environmental Corp. MONSEY, NY 10952-5109
Contact name:
Deborah Rosenthal
Phone: 845 356-6833 URL: Merle environmental corp. W.B.E.21 Cannan RoadChestnut Ridge, NY 10952Phone (845) 3566833Fax: (845) 356-2473e-mail: drosen@j51.comDeborah Rosenthal is the founder of Merle Environmental Corp., a Women-Owned Business Enterprise (W.B.E.). Merle Environmental Corp. is a consulting firm specializing all aspects of environmental compliance i.e. Air, Superfund Amendment Reauthorization Act, Hazardous Waste and FIFRA.Deborah attended McGill University in Montreal, Quebec, Canada. She then moved to the United States and completed her studies at Farleigh Dickinson University obtaining a BS Degree in Science and Engineering. With 25 years of experience in the Environmental Arena, Deborah has been an Environmental & Safety Manager and teacher for Companies such as Essex Specialty Products (a wholly owned subsidiary of the Dow Chemical Company), Marcal Paper Mills, International Paper (formerly Champion Paper and St. Regis Paper) as well as Singer Kearfott (aerospace). As a private consultant I have had such clients as Koch Industries and Fisher Scientific, National Fuel Gases, and Gypsum in New Jersey.Environmental Compliance Services:· Air Permits &#8211; Title V, Facility Wide Permits, and individual stack permits. · Annual Air Emission Statements · Training &#8211; On all aspect of environmental compliance, i.e. air permits (energy), hazardous waste, superfund and pesticides. · Toxic Release Inventory Report (TRI) &#8211; SARA 313 · Hazardous Waste Classifications &#8211; RCRA Compliance teaching all aspects of the Resource Conservation Recovery Act as well as Annual and Biennial Reporting. · Due Diligence &#8211; Phase I. Initial investigation for remediation or purchase of industrial sites.· FIFRA-Pesticides Section 7 compliance as a contractor for EPA Merrill Engineering Ltd Delta, Br V4G 1L5
Contact name:
JAN TANNER-DUNDAS
Phone: 604 952-4199 URL:
www.merrilleng.com
Design and manufacture aerospace tooling and ground support equipment. Main and tail rotor static balance kits, Engine stands, aircraft maintenance platforms, various overhaul and custom tooling. Merritt Tool Co. Kilgore, TX 75663-1209
Contact name:
A.P. Merritt
Phone: 903 983-1592 URL:
Merryweather Foam, Inc. Sylacauga, AL 35151-4601
www.merritttool.com
Contact name:
Bellaire Riley
Phone: 256 249-8546 URL:
www.merryweather.com
We are a fabricator/distributor of over 80 different foams, Foamex, Poron and Voltek, to name a few. We now have three manufacturing facilities to better serve your needs, Barberton, Ohio; Sylacauga, Alabama; and Anthony, New Mexico. Materials we stock and fabricate daily, range from crosslinked polyethylene, PVC foams, closed cell sponge, hi-temp and antimicrobial Poron, Foamex filtered foams, polyester and polyether foams, felted foams, to pressure sensitive adhesives. Our capabilities include die cutting, adhesive coating, blind whole drilling, slitting, hotwire forming, custom packaging and custom fabrication.We currently supply OEM companies in the automotive, aerospace, building products, computer/electronic, tire, medical, consumer products and military markets. Typical applications include, sound and vibration dampening, RFI & reservoiring, protective padding and packaging. Merwarth,Ann FORT MYERS, FL 33908-1799
Contact name:
Ann Merwarth
Phone: 239 415-2290 URL: Aerospace consulting METALEX MFG. INC. CINCINNATI, OH 45242-2083
Contact name:
Don McGraw - Director of Sales/Marketing
Phone: 513 489-0507 URL:
www.metalexmfg.com
Metalex Manufacturing is an ISO 9001/AS9100, high-technology, contract machine shop that specializes in manufacturing complex, close tolerance parts, and assemblies. We embrace challenging projects and prototypes for high tech needs and production runs for commercial applications. Global customers including major spacecraft and aircraft builders, NASA, the world?s largest consumer packaged goods companies, and global utilities. We specialize in complex 5-axis machining, precision grinding, welding (R, S, U, U2 stamp), EDM, tooling, and fabrication & assembly services. METALMART INTERNATIONAL INC Commerce, CA 90040-1606
Contact name:
Bill Lippman
Phone: 562 6929081 URL:
http://www.metal-mart.com
Stocking distributor of specialty aerospace metals, including aircraft alloy aluminum, magnesium, titanium, and stainless sheet, plate, rod, bar and extrusion. Methode Electronics, Inc. Chicago, IL 60706-4548
Contact name:
Tim Mix
Phone: 847 392-3500 URL:
www.methode.com
Methode Electronics, Inc. (NASDAQ: METH) is a global manufacturer of electronic component and subsystem devices. Methode designs, manufactures and markets devices employing electrical, electronic, wireless, sensing and optical technologies. Methode's components are found in the primary end markets of the automotive, communications (including information processing and storage, networking equipment, wireless and terrestrial voice/data systems), military, aerospace, rail and other transportation industries; and the consumer, safety, medical, and industrial equipment markets. Further information can be found at Methode's website www.methode.com. Metro Tool & Manufacturing Inc. GRAND PRAIRIE, TX 75052-7203
Contact name:
DENNIS HEFFERNAN
Phone: 972 641-7355 URL: JOB SHOP & PRODUCTION TOOLING FOR AEROSPACE & COMMERCIAL NEEDS. NO JOB IS TO BIG OR TO SMALL. Metropolitan Aircraft Parts, Inc. West Babylon, NY 11704-1144
Contact name:
JOSEPH CUTUGNO
Phone: 631 752-2290 URL:
www.metair.com
AN - NAS - MS - BOEING STANDARD HARDWARE FOR THE AEROSPACE AND DEFENSE INDUSTRIESSPECIALISTS IN C130, F104, PROCUREMENTAIRESEARCH WASHERS, SHIMS, O-RINGS AND MISC. HARDWARE Metters Industries Inc. Orlando, FL 32826
Contact name:
Jim Exter
Phone: 407 658-6084 URL:
www.metters.com
Manufacture military training devices including ground and flight simulators and components. Land and Sea mine simulators for training humans, sea lions and dolphins. Meyco Machine and Tool Inc. FOUNTAIN VALLEY, CA 92708-4201
Contact name:
LARRY K. LONG
Phone: 714 435-1546 URL:
meycomachine.com
Precision machine shop for aerospace, government and commerical industry. Manufacture of tooling: weld/assembly fixtures, Dies and fiberglass templates. Micro Machining, Inc. Windsor Mill, MD 21244
Contact name:
Alex Doyle
Phone: 410 944-5666 x15 URL:
www.micromachining.com
ISO 9002 registered precision machining job shop offering full range of services from programming and concurrent engineering to CNC milling and turning, manual milling and turning, EDM, grinding, and honing, to finishing of parts and sub-assemblies. We process a wide variety of materials including all stainless steel grades, aluminum, brass, copper and alloys, nickel and alloys, titanium, magnesium, Kovar, and Duroid. We also have extensive experience machining castings. Micro customers include BAE, Lockheed Martin, Raytheon, Honeywell, Northrop Grumman, NASA, Optim, Fiber-Tech, and L-3 Communications. Industries served include aerospace, avionics, microwave, medical/dental instruments, and optical equipment. Microdata Systems, Inc. TOTOWA, NJ 07512-1100
Contact name:
Anthony J. Haddad, PMP
Phone: 973 237-1910 URL: Program Management and Project Management consulting company. Specialize in turnkey project management systems and project management training. Experts in aerospace, IT, IPTs, WBS, EVM, CPM, VBA, etc. Claims experts in Delay and Disruption claims. Microdolly Hollywood Burbank, CA 91505
Contact name:
A. Johnson
Phone: 818 845-8383 URL:
www.microdolly.com
MICRODOLLY HOLLYWOOD manufactures precision built ultra-light Camera Dollies, Dolly Tracks, Jib Arm Cranes, Suction Mounts and Remote Pan/Tilt Power Heads. Aerospace materials and engineering allow MICRODOLLY HOLLYWOOD to produce the lightest, most portable Camera Support Systems available. Average set up time is less than two minutes. MicroE Systems, subsidiary of GSI Group Natick, MA 01760
Contact name:
Pat Kreckie
Phone: 508 903-5059 URL:
http://www.microesys.com
With corporate offices in Billerica, MA, GSI Group develops and delivers the enabling technology solutions that bring our customers' advanced manufacturing applications to life.Our leading
brands include precision motion products, lasers, and laser systems, and are used to boost efficiency annd productivity in the global military, aerospace, medical, semiconductor, electronics, and industrial markets. Microlap Technologies, Inc. ROLLA, ND 58367
Contact name:
TERRY L. HOSELTON
Phone: 701 477-3193 URL:
www,microlap.com
Microlap is a manufacturer of miniature components made of synthetic ruby, synthetic sapphire, ceramic, carbides and other hardened materials. We specialize in the prodution of high precision parts that are manufactured to the customers specifications. Our R & D department is skilled in technical areas that enable our company to assist your engineers in development of experimental products. Currently this company produces parts for the aerospace industry, communications, automotive, food service, medical, water jet and agricultural industries. We also produce optical lenses and prisms and have been very successful in working with clients in producing lenses and other components for the laser. MicroSat Systems Inc. Littleton, CO 80127
Contact name:
Mark C. Wood
Phone: 720 842-8010 URL:
www.microsatsystems.com
Middle East Services Group (Consultancy) San Pedro, CA 90731-3809
Contact name:
Mr. Stephen H. Franke
Phone: 310 832-1037 URL: Veteran-owned small business providing professional services related to business intelligence, market research and sector analysis, training & consultancy support to US govermment agencies, corporations, firms / SMEs and other entities with interests in the Middle East (Arabophone countries, Iran and Turkey) and Arabophone regions of Africa. Special competencies in advice on business practices, language aspects, and cultural dynamics of aerospace & defense technologies, business development, customer satisfaction & retention, technology transfers, economic offsets / industrial participation (IP) programs, skills migration, and the training & development of Middle Eastern nationals as managers, technicians and staff members. Mide Technology Corporation Medford, MA 02155
Contact name:
Petra Botha
Phone: 781 306-0609 URL:
www.mide.com
Midé Technology Corporation is a Research and Development Company active primarily in the aerospace, automotive, and manufacturing industries. Midé is able to design and produce custom made products and serves many companies in the important role of consultant. The company has the ability to conceptualize, design and deliver high performance systems tailored to a user’s specific application. System components, whether custom designed or sourced from suppliers, are integrated through Midé’s extensive suite of expertise in the fields of electronics, actuation, sensing, control, system design, and integration.Products and Services Description: The innovative experts at Midé are able to design and produce custom made actuators.Problem solving through modeling and analysis: Midé’s personnel have extensive experience in the modeling of coupled static and dynamic systems including; compressible and incompressible fluid systems, structures, smart material systems, robotics, thermal, aeroelastic and nonlinear systems. Midé personnel have strong backgrounds and experience in the control of electromechanical systems and have the capabilities to design and implement analog and digital controllers for these systems.Prototype development: Midé can design, develop, and test turnkey prototypes. Their design team follows a design model to iteratively arrive at a performance and cost optimum solution. Milcom Services Inc Lake Worth, FL 33461-3361
Contact name:
Ursula Lemmens
Phone: URL:
Millrite Design Inc. Westfield, MA 01085-1329
Contact name:
Judy Hill
Phone: 413 568-8300 URL:
www.millrite.com
Millrite Design Inc. provides Tool Design, Product Design and Machine Design and Build services. We have over 200 years of experience in the aerospace industry. We utilize Unigraphics, Pro-E, Autocad, CADRA and Solidworks. Tool Design is for jigs, gages and fixtures. Product design involves solid modeling concepting Machine Design concept, design and documentation Milo Engineering Torrance, CA 90505-5330
Contact name:
Raymond Hofer
Phone: 310 326-0274 URL:
www.miloeng.com
Aerospace fasteners and CNC Machine shop.miloeng.com Milton Vermont Sheet Metal, Inc. Milton, VT 05468-3296
Contact name:
Wendell Devenger
Phone: 802 893-1581 URL:
www.trianglemetalfab.com
Tri-Angle is engaged in the manufacturing of precision fabrications and machined components for the aerospace, ordnance, electronic, and commercial industries. Our quality system is registered in accordance with ISO9002:1994 and all inspection, measuring and test equipment is calibrated and traceable to The National Institute of Standards and Technology.Welding is performed in accordance with AMS-STD-2219 by qualified welders meeting AMS-STD-1595 requirements, or those imposed by our customers. Mingo Aerospace, LLC Owasso, OK 74055
Contact name:
Rick Richardson
Phone: 918 272-7371 URL:
www.mingoaerospace.com
Mingo Aerospace is a repair and overhaul with manufacturing capabilities to the defense and aerospace idustries. FAA Repair Station W8QR228Y, EASA Repair Station 145.5951, ISO 9001/AS-9100 Registered. Mirart, Inc. Pompano Beach, FL 33069-4323
Contact name:
Jeff Oster
Phone: 954 9745230 URL:
http://www.mirart.com
We manufacture and fabricate from acrylic and acrylic mirror thousands of different items. Mirrored switch plates, acrylic furniture, mall glass clamps, bath accessories, Knobs, pulls, Shower door handles, candy and bulk food bins, closet dividers, POP displays, and many custom and made to order OEM parts.We also distribute glass and mirror working tools, Supplies, abrasives, foam tape, UV adhesives, Diamond Drills, Makita Tools, 3m bumpons, and many other items.We also make products for military and aerospace out of other exotic engineering and hiperformance plastics. MissionSpace Corporation La Canada, CA 91011
Contact name:
John Eagles
Phone: 818 541-0067 URL:
www.missionspace.com
MissionSpace provides Commercial-Off-The-Shelf (COTS) software, superior technical support, and custom solutions to the Aerospace Community. We integrate our COTS data acquistition and telemetry processing software with software and hardware packages from our industry par tners to provide our customers with a complete, turn-key solution. Or, as an option, we can integrate our COTS components with your existing hardware to provide you with the ultimate in cost savings. Miyano Machinery, Inc. Wood Dale, IL 60191
Contact name:
Imad Tsay
Phone: 630 766-4141 URL:
www.miyano-US.com
Miyano Machinery Inc. is a high quality machine builder, specializing in the manufacturing of high precision CNC lathes, CNC drilling/tapping machines, and screw machines. We provide sales, parts, & service though out the nation to the following industries: Automotive, Aerospace, Medical, and Electrical. MJ Aerospace, LLC ROBERTS, MT 59070-0252
Contact name:
Sandra L. Obert
Phone: 406 445-9850 URL:
none
We are a small,hubzone, woman-owned business that focuses on detail and efficiency in supplying surplus parts. mkr precision,inc new milford, NJ 07646-1636
Contact name:
vijay panchal
Phone: 201 262-1859 URL: Our company specializes in custom machining for parts and machines for the medical, plastic, and aerospace industries. Our company can do any type of custom design and fabrications you need done, and we can also do conversionwork for any existing machinery you have. Our CNC machines can work with plastic, steel, aluminum, precious metals, and other materials. Delivery is alsoavailable anywhere in the state of New Jersey. You wonâ&#x20AC;&#x2122;t find a faster turnaround or more detailed work anywhere else Modern Pattern Works Ltd. Scarborough, On M1L 4B7
Contact name:
Barry Smith
Phone: 416- 7515272 URL: ESTABLISHED IN 1956 NOW LOCATED IN SCARBOROUGH WITH 7 HIGHLY SKILLED CRAFTSMEN - OPERATING SPACE. 6500SQ.FT. OF PLANT/OFFICE. EQUIPPED WITH UP TO DATE MACHINERY AND EXPERIENCED IN ALL ASPECTS OF MANUFACTURED PRODUCTS INCLUDING FOUNDRY,PLASTICS AND AEROSPACE TRAINING AIDS AND MODELS FOR THE CANADIAN SPACE AGENCY. Modified Polymer Components, Inc. Sunnyvale, CA 94089
Contact name:
Noel Taylor
Phone: 408 733-8900 URL:
www.modifiedpolymer.com
Modified Polymer Components Inc. specializes in the design, rapid prototyping and manufacture of reliable, highly precise polymer components for Medical Device OEMs, as well as companies in the electronics, aerospace, biotech and semiconductor industries. Since its founding in 1989, MPC has grown into an ISO 9001/13485 registered contract manufacturer. Our capabilities include manufacturing of wire reinforced tubing, product improvement, custom modifications to existing components, electrical assembly, thermoplastic molding, silicone molding, and specialty tubing processing. MPC operates a 23,000-square-foot facility in Sunnyvale, California, that houses two R&D environments, multiple white rooms, a state-of-the-art machine shop and large industrial manufacturing spaces. MODULAR DEVICES INC Shirley, NY 11967-4706
Contact name:
CHRISTINE MERL
Phone: 631 345-3100 URL:
http://www.mdipower.com
MDI manufacturers Hybrid,Discrete and Surface Mount Converters, Power Supplies and Power Systems, for Military, Commercial Space and Aerospace applications.Our converters are fully self-contained system level products in standard, semi-custom and customer packages.All units have built-in EMI and common mode filters.Available power levels range from 1 to 2000 Watts.Wide selection of input bus voltages. Standard & unique output voltages. We offer single converters and converter assemblies which simplify system integration and reduce risk associated with new designs.We offer various grade levels and radiation solutions.MDI delivers proven experience, quality and reliability for success. Modular Devices, Inc. Shirley, NY 11967
Contact name:
CHRISTINE MERL
Phone: 631 345-3100 URL:
www.mdipower.com
Modular Devices, Inc. (MDI) designs and produces an exceptionally wide range of power supplies for military, aerospace and commercial space applications. From single converters to robust converter assemblies, MDI's high reliability hybrid DC-DC converters with built-in EMI filtering offer optimum technology in the smallest, lightest packages for the most demanding applications. Ruggedized assemblies and Proton Rad Hard technology in standard designs adaptable to your unique requirements. Newest additions include point-of-load converters, sequenced converters, and in-rush limiters. Monarch Industries Brea, CA 92821
Contact name:
Richard Matthews
Phone: 714 671-5861 URL: Distributor of Adhesives
www.glue4u.com
MONOGRAM AEROSPACE FASTENERS LOS ANGELES, CA 90040
Contact name:
MICHELLE MULLIN
Phone: 323 722-4760 URL:
www.monogramaerospace.com
We manufacture fasteners for the aerospace industry as well as the tooling to install and remove. Monroe Machined Products.com Seatac, WA 98148
Contact name:
Sue Johnson
Phone: 206 242-4898 URL:
www.mmpnet.com
We are an small family owned business that specializes in manufacturing and machining aircraft parts. Morton & Company, Inc. Wilmington, MA 01887
Contact name:
ROB POIROT
Phone: 978 657-7726 URL:
www.mortco.com
Precision machining job shop with electro-mechanical assembly capabilities. 35 years in aerospace, military, medical and laser fields. 35 employees, 12,000 sq. ft., palletized machining centers. KAN BAN, JIT and Ship to Stock inventory plans. MPTechnologies Inc. Brecksville, OH 44141-3413
Contact name:
PAUL J TAKACS
Phone: 440 838-4466 URL:
MPTechUSA.com
The mission of MPTechnologies (Manufacturing Process Technologies) is to design, develop and build new machines, processes and systems for the manufacturing and processing industries.* Special Machines* Automated Systems* New Processes* Automated Robotic Work CellsAutomated machines, processes and systems have been designed, built and delivered for Fortune 500 clients in a wide range of industries.* Automotive and Aerospace* Consumer and Appliance* Food and Packaging* Plastics and Rubber* Medical and HealthPrograms in the public sector include NASA, US Air Force, US Navy and the US Postal System.Final delivered machines and systems can range in cost from $20,000 to over $2 million. For one client we shipped seven systems, each over $1 million, to three of their international facilities. When required we can provide a quick turnaround for client projects. MS Electronix Miami, FL 33162-4246
Contact name:
Kathy Pino
Phone: 305 945-8798 URL:
www.mselectronix.com
We are a woman-owned small company and are eager to provide maximum opportunity to help people meet their needs in the Avionics and Aerospace Industry. We are very efficient and strive to deliver exceptional service without delay, superior quality and the finest products available. Our staff's experience is backed by access to some of the largest inventories in the industry. We understand the importance of timeliness and our stock is ready to support your requirements. We specialize in supplying Military and Commercial connectors, contacts, backshells / adapters, tools, relays, switches, circuit breakers, cable assemblies and accessories. We are also very skillful in locating those â&#x20AC;&#x153;hard to findâ&#x20AC;? parts and can supply you with products from some of the leading manufactures such as Amphenol, ITT Cannon, Bendix, Deutsch, Aero-Electric, Glenair, Daniels and many more. We can also provide you with MIL-C-22992 Class L Connectors. The Class L Connectors are the largest size cylindrical connectors and are suitable for industrial or military applications, and meet the demands of heavy power interconnections. An example would be MS90556C32412P. MS Electronix has dedicated itself to serving the Military and Commercial Aerospace market we hope we can develop a business relationship that you will benefit from. MSE Technology Applications, Inc. Butte, MT 59701
Contact name:
Andrew P. Zdinak
Phone: 406 494-7233 URL:
www.mse-ta.com
Applied technical firm specializing in developing, evalauting, deploying, and commericalizing innvoative advanced technologies in the area of environmental remediation, pollution prevention, advanced metal coatings, propulsion systems, and energy processes. MSK PRECISION PRODUCTS, INC Fort Lauderdale, FL 33309
Contact name:
RON MAY
Phone: 954 7760770 URL:
www.mskprecision.com
MSK's primary capabilities are screw machining or turning and the ancillary operations that traditionally accompany them. We have CNC and CAM Swiss equipment for high precision work and lights out machining. Our Brown & Sharpe machines and Hardinge Conquest CNC lathes are available for medium volume production runs. Additional Hardinge lathes, Omniturns and hand screw machines are used for short runs and secondary operations, if required MTI-MILLIREN TECHNOLOGIES INC Newburyport, MA 01950-4054
Contact name:
Manish Vaish
Phone: 978 465-6064 URL:
www.mti-milliren.com
MTI Milliren Technologies Inc. designs and manufactures frequency control products for commercial, military and aerospace applications. MTI's product line includes precision
oscillators, multiple frequency sources, Synthesizers and Logarithmic Amplifiers. Mulville Consulting Services Vienna, VA 22180-4612
Contact name:
Daniel Mulville
Phone: 703 850-9053 URL:
www.mulville.com
Aerospace management and technical consulting National Electrical Carbon Products Greenville, SC 29607
Contact name:
Stacey Hargrave
Phone: 864 458-7777 URL:
www.nationalelectrical.com
National Electrical Carbon Products offers carbon brushes for DC and slip-ring motors, specialty products, surface rounding and cleaning brushes and technical services (training, seminars,material testing).National Reliability Systems, a division of NECP, offers portable and online vibration analysis equipment, as well as vibration analysis services and training. National Sealants & Lubricants Magnolia, TX 77355-1641
Contact name:
Billy Matthews
Phone: 800 527-0011 URL:
www.nationalsealants.com
Distributor of sealants, lubricants, adhesives, epoxies, silicones, solvents, and cleaners used in the aerospace industry. Products have BMS, AMS, or MIL specifications and National Stock Numbers (NSN). NC Aerospace DANBURY, CT 06810-8044
Contact name:
Natalie Caetano
Phone: 203 748-5400 URL:
www.ncaerospace.com
Distributor of aircraft parts. ND Industries, Inc. Clawson, MI 48017
Contact name:
Ted Wallace
Phone: 248 655-2515 URL:
www.ndindustries.com
For over 50 years ND Industries has been a pioneer in fastening and sealing technologies, owning and operating the largest group of facilities in the United States as well as state of the art facilities in China and Taiwan. ND provides top quality fastening and assembly related products and services, specializing in sealants, threadlockers, anaerobics, lubricants, adhesives and more, to a wide variety of industries, including automotive, electronics, aerospace, marine, construction, and appliance. NEFAB Packaging Inc. Dallas, TX 75019
Contact name:
Laura Ballam
Phone: 469 444-5320 URL:
www.nefab.us
Nefab, founded in 1949, delivers complete packaging solutions to global industrial groups with a focus on the Telecom, Energy, Aerospace, Vehicles and Healthcare Equipment industries. We develop complete packaging solutions optimized to reduce total cost and environmental impact in your supply chain. With global engineering and supply capabilities we serve you in every corner of the world. In order to meet customers' needs for packaging solutions, Nefab offers export packaging compliant with International Phytosanitary standards.<br><b>Nefab - Your Packaging Solution. Nell-Joy Industries Copiague, NY 111726
Contact name:
Sandra Puebla
Phone: 631 842-8989 URL:
www.nelljoy.com
We are manufacturers and suppliers of aircraft parts, helicopter materials, and engines. We carry over 350,000 different parts in temperature controlled warehouses located throughout the nation. We also provide services such as overhauls, repairs, and maintenance. Our clients vary from private domestic companies, US Gov't, Foreign companies and governments. For more information on our company and capabilities please send an e-mail to spuebla@nelljoy.com Net eSolutions Corporation Herndon, VA 20170-4846
Contact name:
Sandeep Somaiya
Phone: 703 788-6606 URL:
www.netesolutions.com
Nete, established 1999, is an Internet and e-business one-stop services provider for Internet/Web and Software Applications Development and Design Consulting Services firm - we are a one-stop shop - offering strategy, architecture, branding, creative, design, coding, marketing, testing and maintenance/hosting services. We are one of the prestigious Golden Web Award winners for 2002-2003. We are headquartered in the Washington DC/Northern Virginia metro area. We are Virginia Corporation with a team strength of 30 talented designers and programmers at all locations. Nete serves a broad and diversified global client base in a variety of segments, including Capital and Financial Services, Professional Services, Advertising, Entertainment, Media, Health and Medicine, Government, Internet, Sports, Travel, Aerospace, Corporates, Manufacturers, Software, Technology, Institutes, Real Estate, Communities, and Internet-based
software components development. Netzer Metalcraft, Inc. Baltimore, MD 21211-4884
Contact name:
Scott A. Saunders
Phone: 410 467-9762 URL:
www.netzermetalcraftinc.com
An Aerospace and Industrial Sheet Metal, Machining, and Fabricating Facility located in Baltimore Maryland. Items manufactured range from Hydroformed and Marformed components, to riveted, bonded, or welded assemblies, to simple mounting brackets and extensive fabrications. Our substantial facility produces prototype to production quantities utilizing our extensive CAD, Punch, Brake, Fabricating, Machining, Welding, and Inspection capabilities all under one roof.As an essential supplier to Middle River Aircraft Systems, delivering approximately 2 Million in product annually, we provide an extensive Mil-Spec Certified range of products utilizing punched, formed, bonded, riveted, and welded construction. We typically process aircraft quality clad and bare aluminum, steel, stainless steel, plastic, and laminates, as well as a variety of castings. We provide in-house Mil-Spec. finishing, with electrochemical etch, ink, and other suitable marking methods. With an experienced Inspection Department operating within Mil-Std-45208, having also been awarded MRAS 9000 certification, we are able to serve our customer base in an efficient and quality guaranteed manner. We also have complete in-house CAD and CAM capabilities including CATIA, SOLIDEDGE, AUTOCAD, METALSOFT, and ESPRIT for complete abilities to manufacture directly from your print or solid model. Nevra Tech Corp. Palmetto, FL 34221
Contact name:
JIM POULOS
Phone: 941 729-7446 URL:
WWW.NEVRATECH.COM
Nevra Tech is an independent STOCKING distributor specializing in MILITARY AND AEROSPACE electronic components. If your production is being threatened by part allocation or obsolesence, we are your solution! Nevra Tech has been supplying HARD-TO-FIND and OBSOLETE components to major defense contractors (Honeywell, Raytheon, Lockheed Martin, Boeing) as well as the automotive and medical industries for over a decade! Nevra Tech offers you the benefit of our wealth of experience. We enjoy HIGH QUALITY, long-term relationships with major manufacturers and are privy to vital information with regard to forecasting obsolesence. This coupled with LARGE volume purchasing agreements puts us in an excellent position to compete with franchise operations. Our experienced staff is focused on impeccable customer service and prompt delivery. We are standing by and ready to serve YOU! New Vac Electronics, Inc. Chatsworth, CA 91311
Contact name:
G. Thomas Faust
Phone: 818 407-7224 URL:
www.newvac.com
New Vac Electronics, located in Chatsworth, CA, is a leader in the concept design, manufacture and testing of custom engineered cables, cable assemblies, harnesses and connectors. For
more than 20 years, New Vac has specialized in providing applications-oriented answers to complicated interconnection design challenges for the aerospace, military and medical industries. Newco, Inc. Florence, SC 29501-5931
Contact name:
Bill Williams
Phone: 843 669-2988 URL:
www.newcoinc.com
NexTechnologies International Westford, MA 01886
Contact name:
Brian O. Klinka
Phone: 978 392-2213 URL: NexT is an engineering services and product development firm with a focus on the aviation and aerospace industries, and expertise in propulsion, power, energy, control and actuation systems Nichols Manufacturing Inc Milpitas, CA 95035-3166
Contact name:
Lettie Nichols
Phone: 408 945-0911 URL:
nicholsmfg.com
We are a small dis-advantaged women owned business who specializes in machined parts and assemblies. 80% of our work is aerospace / defense oriented. Typical parts are medium to high complexity. Noran Engineering, Inc. Westminster, CA 92683-8230
Contact name:
Noran Info
Phone: URL: www.NENastran.com Noran Engineering, Inc. (NEi), a leader in computer-aided engineering (CAE) software, provides a complete suite of analysis tools for structural, thermal, dynamic, fluid flow, fatigue, and optimization to aerospace, automotive, maritime, military, medical, and consumer product industries. NEi backs its software with industry regarded technical support. Northeast Aerospace Lawrence, MA 01843
Contact name:
FRANK JUAREZ
Phone: 978 725-8085 URL:
www.northeastaero.com
Northeast Aerospace supplies some of the most vital and sophisticated support components to the Aerospace, Industrial, and Commercial sectors. Strategic investment in broad inventory coverage, information systems, and quality control systems allow NEA to continue a tradition of unparalleled customer service. Offering some of the most diverse availability of precision fasteners in North America NEA continues to outpace the competition in price, delivery, and service. Northeast Electronics Corp. Milford, CT 06461-1735
Contact name:
John Short
Phone: 203 878 3511 URL:
http://www.northeast.com
Northeast electronics manufactures a wide range of glass-to-metal hermetic seals. Industries that are served are Aerospace, Military, Automotive, Medical, Sensors, Microwave and Telecommunications. Northeast utilizes computer controlled batch and electric atmospheric belt fed furnaces. In addition to glass sealing Northeast has in house plating( gold,nickel,copper, and tin)vacuum brazing,grinding,welding and laser marking. Northeast is ISO9001 certified. Northrop Grumman Cutting Edge Optronics St. Charles, MO 63301
Contact name:
Jessica Tracey
Phone: 636 916-4900 URL:
http://www.st.northropgrumman.com/ceolaser
Manufacturer of diode pumped solid state lasers and laser components for military and aerospace applications. We specialize in laser package for military environments. Also specializing in laser diodes, diode arrays and customized laser diode packaging. Norwest Precision Ltd. North York, ON M9L 2T6
Contact name:
Corrado Falcitelli
Phone: 416 742-8082 URL:
www.norwestprecision.com
At Norwest Precision Limited, a skilled work force makes us a leading machining resource with virtually unlimited capabilities. As a reliable supplier to worldwide markets we specialize in the precision machining of complex components and assemblies for a broad spectrum of industry sectors that include: automotive; aircraft and aerospace; defense; steel fabrication; oil refinery; plastic and rubber molding; pulp and paper processing; hydraulics; and power utilities. The range of services we offer completely encompasses the precision machining of small, medium and large size components - from the initial acquisition of raw materials to the final inspection of manufactured parts. All things considered, Norwest Precision offers customers a unique service that is personalized in approach, comprehensive in scope and cost effective in practice. Ohio Gasket & Shim Co Akron, OH 44305
Contact name:
BOBBIE BERGMAN
Phone: 330 630-2030 URL:
www.ogsindustries.com
OGS Industries is a manufacturer of metal stamped parts as well as custom metallic and nonmetallic gaskets and shims. We are a domestic and international supplier primarily for the OEM markets in aerospace, aircraft, automotive, compressors, construction equipment, gas & oil, machinery, marine, mining & drilling equipment, plumbing & heating, pumps, recreational vehihcles, trucking, utility and valve industries. Ohlinger Industries Phoenix, AZ 85027
Contact name:
RANDY OHLINGER
Phone: 602 285-0911 URL:
www.ohlingerind.com
FAA Repair station which specializes in the repair and overhaul of components for gas turbine engines. Our Main area is Auxiliary Power Units. Olympic Controls Corp. Elgin, IL 60120
Contact name:
Dave Armon
Phone: 847 742-3566 URL:
www.occorp.com
Olympic is a manufacturer of custom, hard to find legacy products serving the commercial, aerospace and military markets. Tokheim Electric 12 and 24v fuel pumps and T-Bar Relays and Switches. Omanson Precision Engineering, Inc. Torrance, CA 90503-7344
Contact name:
Dwight Omanson
Phone: 310 320-9924 URL:
www.omanson.com
CNC Machine Shop - aerospace parts Omega Optical, Inc. Brattleboro, VT 05301
Contact name:
Radka Jiraskova
Phone: 802 2517342 URL:
www.omegafilters.com
Since 1969 Omega Optical has built its technical reputation on defining the state-of-the-art for optical interference filter performance. We manufacture a wide variety of custom and stock filters for researchers, labs, and industry worldwide, offering rapid prototyping, collaborative engineering, production quantities, and spectral control from UV to the IR. Our filters are used in
OEM instrumentation, fluorescence microscopy, flow cytometry, Raman spectroscopy, astronomy/aerospace, photolithography, color imaging, machine vision, biosecurity biotech, drug discovery, flow cytometry, photodynamic therapy, biosecurity, and many other applications. Our proprietary ALPHA technology produces steep slopes and precise cut-on and cut-off. Omega also recently purchased a Dual Magnetron Reactive Sputtering Chamber to expand our portfolio to include ultra-hard suface coatings with superior transmission and attenuation. Omnetics Connector Corp. Minneapolis, MN 55432
Contact name:
Greg Jones
Phone: 763 572-0656 URL:
www.omnetics.com
Omnetics Connector Corporation designs and manufactures high-grade Micro and Nano miniature electrical connectors ideally suited for high tech applications where size and quality are critical. These connectors built to pass the MIL-DTL-83513 or MIL=DTL-32139 specifications. They are designed specifically for use in industries such as Medical Electronics, Defense Aerospace, and Avionics.Omnetics specializes in both .050"" and .025"" centerline connectors. COTS and Standard insulator shapes include single row, dual row, and circular configurations. Omnetics can also design custom machined and molded insulators as required.Depending on the configuration, sizes are available from 1-176 positions. Optional features include: Guide Pins, Mounting Holes, Latches, Retention Screws, and for added durability custom metal housings can also be added. Omnetics has the expertise to make high quality terminations to various types of wire, cable, and flex circuits per customer requirements. Omnetics is tooled to create a wide range of SMT and Thru-Hole tails. Additional custom tail bends can be created with modest NRE charges.Our connector designs incorporate the time tested Flex-Pin. These compliant stamped pins mate with our screw-machined sockets. Both are gold plated and offer superior reliability. They offer low resistance and excellent current of 3 amps per contact, while the .025"" center nano connectors can carry up to 1 amp per contact.Omnetics has the knowledge and experience to support the miniature connector needs of your high tech applications. We can help you from the design phase through high volume production. Omnetics Connector Corporation Minneapolis, MN 55432-3103
Contact name:
Greg Jones
Phone: 763 572.0656 URL:
www.omnetics.com
Design and manufacture micro and nano miniature electronic connectors that meet or exceed MIL-DTL-83513. Ideally suited for use in mil/aerospace, avionics, medical and other high-rel environments. Products include thru-hole, SMT and wired single and dual row, circular and test connectors. Capabilities include Engineering assistance, CAD and prototypes, through highvolume production. Omni Packaging & Industrial/Aerospace Supply Oklahoma City, OK 73131-6518
Contact name:
Mark Smith
Phone: 405 810-8745 URL:
www.omnipackaging.com
Distributor of packaging, industrial and aerospace supplies. Omni Technologies Corporation Epping, NH 03042-0820
Contact name:
James Jossick
Phone: 603 679-2211 URL:
www.omnibraze.com
Omni Technologies is an industry leader in the development of innovative brazing solutions. Our flux cored aluminum products have revolutionized brazing in the automotive, HVACR, and aerospace industries. Our wide array of metal joining products include: Aluminum Flux Cored Rings and Wire, Corrosive and Non-Corrosive Flux Coated Shim and a broad selection of braze and solder pastes that include aluminum, silver, nickel, copper, tin, and zinc alloys. Omnicut Inc ELGIN, OR 97827
Contact name:
Jeff Smith
Phone: 541 437-7777 URL:
www.omnicutinc.com
Omnicut is an AS9100 certified aerospace supplier, specializing in large or complex 5-axis machined parts and assemblies. On-Site Calibration Services, INc. Redmond, WA 98052
Contact name:
Mark Lovell
Phone: 425 883-7880 URL:
www.onsitecal.com
Calibration of Precision measurement instruments, woman owned business, 14 years servicing Aerospace, Coast Guard, Navy, and are one of the major commercial calibration laboratories in Washington State, ISO 9001-2000 certified, ANSI/NCSL Z540. Much more information available, contact us through out website. Thank you for participating in home land defense. Opf Inc Oxnard, CA 93030
Contact name:
David Garza
Phone: 805 985-0447 URL:
www.opfinc.com
Manufacturer of sheet metal products for military, medical, aerospace, & various commercial industries. Optical Components Inc. Covina, CA 91724
Contact name:
Chuck Holt
Phone: 626 967-5281 URL:
www.ocioptics.com
OCi manufactures and coats precision optics such as prisms,windows, lenses, wedges, filters & beamsplitters. Our coating capabilities vary from most all visible coatings and infra-red coatings. Coatings range from 260 nm to the far IR. Optical Gaging Products, Inc Rochester, NY 14621-4895
Contact name:
Len Mills
Phone: 585 544-0400 URL:
www.ogpnet.com
Optical Gaging Products, Inc. (OGP速) is an innovator in non-contact and multisensor dimensional measurement systems, optical comparators, and laser surface scanners for manufacturing quality control. OGP technology is used throughout the world to help manufacturers develop, maintain, and qualify production processes. Our products provide solutions in the automotive, aerospace, ceramics, clinical, electronics,semiconductor, plastics, medical, and metalworking industries. OGP innovations have become industry standards relied on by major manufacturers. OGP delivers accurate, reliable measurement systems using optics, video, precision mechanics, the latest surface mount electronics, dedicated software, and the skills of our people. From years of experience as users and manufacturers of these measurement systems, we keep our leadership position by continually innovating - offering features and capabilities that help our customers improve their quality and reduce their costs.OGP is a leader in multisensor systems. The combination of video, laser, and touch probe allows our systems to perform more measurements, faster. Multisensor technology increases flexibility and reduces system costs and setup time.OGP maintains facilities in Rochester, NY; Denver, CO; Singapore; Germany; and Shanghai, China. Optical Gaging Products is one of the Quality Vision International companies. Optodyne, Inc. Rancho Domingues, CA 90220
Contact name:
Charles Wang
Phone: 310 635-7481 URL:
www.optodyne.com
Optodyne, Inc., designs, manufactures, and markets laser-based precision measurement equipment for machine tool calibration and compensation, metrology, nano meter positioning, vibration sensing, and a wide variety of other industrial applications for the end user and OEM markets. Optodyne believes that quality improvements will be the key to improving productivity in manufacturing. The company is dedicated to making quality affordable for its customers by incorporating laser technology in precision measurement equipment. We have eight patents and many pending. The company's goal is to continue to provide innovative superior quality products while maintaining the industry's highest performance/price ratio.Optodyne welcomes you to our web site http://www.optodyne.com . For a standard application, click on any of the four photos on the right. To find an application, click on Select an Application . If you know the product model number, click on the Which Product are you looking for? Technical documents are available for viewing or download. ORBIT/F R, Inc. Horsham, PA 19044
Contact name:
Stephanie Paey
Phone: 215 674-5100 URL:
http://www.orbitfr.com
ORBIT/ FR, INC. is a leading turnkey provider of Antenna, RCS and Radome test & measurement products. ORBIT/ FR offers solutions for Far Field, Near Field, Compact Range, and RCS, and Radome applications. The company has supported the defense, aerospace, telecommunications, and automotive industries for more than 25 years. Orbit/FR Inc. Horsham, PA 19044-2309
Contact name:
John Aubin
Phone: 215 674-5100 URL:
www.orbitfr.com
ORBIT/FR, Inc. develops, markets and supports sophisticated automated microwave test and measurement systems for the aerospace, defense, wireless communication, automotive and satellite industries. For more information about the company, please visit our website at www.orbitfr.com. Orthstar, Inc. Big Flats, NY 14814
Contact name:
James E. Orsillo
Phone: 607 562-2100 URL:
www.orthstar.com
ORTHSTAR is a systems, software and product development company in the aerospace, transportation (Rail And Transit) and automation marketplaces. ORTHSTAR's systems are realtime control, simulation modeling based and on-line information management. Owen Aerospace long beach, WA 98631
Contact name:
robert maple
Phone: 360 642-4001 URL:
www.owenaerospace.com
machine shop, welding shop, fab shop. cnc, nc, manual machines as well as EDM sinker, P & M Enterprises, Inc. CHARLOTTE, NC 28211-1572
Contact name:
Pete Mussoni
Phone: 704 367-1505 URL:
www.metalsellers.biz
Distributor Broker of Aluminum Aerospace Stainless copper and non ferrous metals Inclusing all exotices and Mil Spec metals.
P & P Optica Inc. Kitchener, On N2M 5C6
Contact name:
Olga Pawluczyk
Phone: 519 576-0007 URL:
www.ppo.ca
P&P Optica offers a series of CCD based spectrometers, including: high performance spectrometers, multichannel spectrometers and imaging spectrometers all based on the unique technology of volume phase holographic (VPH) gratings. These systems offer non-scanning design to acquire the entire spectrum at the same time. The exceptional transmission based design of our spectrometers provides unprecedented dynamic range, spectral resolution and overall performance for either laboratory or industrial applications.We also provide services in the design, prototyping, manufacture and implementation of optical instrumentation and custom optics, with a wide selection of coatings. We deliver personalized service, superior technical expertise, efficient solutions and a high level of customer satisfaction. Our customers are corporations, research facilities and governmental agencies that require optical products and services. P P I Aerospace Acquisition, LLC Warren, MI 48089-4246
Contact name:
Tina M. McCrillis
Phone: 586 772-7736 URL:
www.ppiaerospace.com
Electroplating and Surface Treatment of various types of metals for all industries. P T M Electronics, Inc. Ann Arbor, MI 48103-9123
Contact name:
Pete Fodor
Phone: 734 426-9010 URL:
http://www.ptmelec.com
PTM designs and builds test equipment including hardware and software for electronic controls. Electronic control units used in vehicles, aerospace, and military are candidates to utilize PTM Electronics test equipment. PTM's universal test approach greatly simplifies and cost reduces typical testing approaches. P.K. Trading BROOKLYN, NY 11209-3408
Contact name:
Paul Koukos
Phone: 718 836-7339 URL: Distributor of Aviation/Aerospace Parts P2S Engineering, Inc. Long Beach, CA 90815-5218
Contact name:
Kevin Peterson
Phone: 562 497-2999 URL:
www.p2seng.com
P2S Engineering is a full service mechanical / electrical / telecommunications engineering firm including fire protection and control system design. In addition to design, Projects have included electrical distribution, telecommunication infrastructure, lighting, energy reduction, geothermal, controls, thermal storage, cogeneration, commissioning and central plants. Other services include master planning, conceptual design, system commissioning, constructability reviews and project management. P2S serves faciltities in the advanced technology, waterfront, industrial, aerospace, and institutional markets. Pacific Aerospace & Electronics, Filter Division Wenatchee, WA 98801
Contact name:
DONNA GARDNER
Phone: 509 665-6500 URL:
www.pcth.com
Pacific Aerospace & Electronics, Inc. is an integrated manufacturing company. We specialize in technically demanding ceramic and metal components and assembliesFilters, Capacitors, hermetic connectors and packages, for global leaders in the aerospace, defense, electronics, medical, telecommunications, and energy industies. The company utilizes specialized manufacturing techniques, advanced materials science, process engineerng and proprietay technologies and processes to its competitive advantage. Our world class engineering and technical diversity allows us to produce a broad range of products and processes for our selected markets from the same assembly lines. We offer the ""Total Solution"" to our customers. Pacific Forge, Inc FONTANA, CA 92337-6909
Contact name:
Lynda Botsford
Phone: 909 390-0701 URL:
www.pacificforge.com
Pacific Forge makes closed die forgings for aerospace and military applications in steel alloy, titanium, inconel, stainless steel. PACIFIC POWER SOURCE, INC. Irvine, CA 92614
Contact name:
JAMES LOGUDICE
Phone: 949 251-1800-123 URL:
www.pacificpower.com
Pacific Power source is a privately held, leading manufacturer of high quality AC power conversion equipment. Corporate facilities including marketing, manufacturing and research and development are located in Irvine California.The Company was founded in 1971 and has achieved steady growth based upon the ability to supply high performance AC power equipment incorporating advanced technology.Products manufactured by Pacific Power range from 500 VA
to 750 kVA. The products incorporate redundant circuitry and modular construction in order to achieve high reliability and ease of service. Markets served by Pacific include major U.S. and foreign corporations, military, aerospace and government end users. Applications include power test equipment, power conditioners, frequency converters and uninterruptible power supplies.Pacific was an early pioneer in the development of linear solid state power conversion for use in high reliability applications. In the past few years, company developments have produced an advanced switcher that approaches linear performance and achieves 95% efficiency. Pacific was the first to offer programmable control of these power circuits for test applications. Present control capabilities range from simple manual systems for basic functions to IEEE-488 bus controlled instruments with full waveform and transient generation. Through technical leadership and continual product development, Pacific continues to maintain a reputation as a leader in the power conversion industry. Pacific Testing Laboratories, Inc. Valencia, CA 91355-3426
Contact name:
Cathy Kingsbury
Phone: 661 257-1437 URL:
www.pacifictesting.com
Independent Materials Testing and Failure Analysis Lab. Government-approved Printed Circuit Board and material testing, including Qualification Testing. Aerospace, Military, Medical, Automotive,Commercial Industries, Pacifica Engineering, Inc MUKILTEO, WA 98275-2849
Contact name:
Marijke Blakely
Phone: 425 315-8040 URL:
www.pacifica-engineering.com
Pacifica Engineering, Inc. provides design engineering, tool design (composite, mechanical, & automated), design/build, FEA/Stress analysis, simulation, and design for manufacturing services (mechanical & electromechanical), primarily to the aerospace sector. The company has a diverse and highly qualified staff of experienced structural engineers, tool & machine designers, mechanical engineers, professional engineers, NC programmers, & project managers, taking projects from inception through delivery and installaion. Software includes Catia V4 & V5, ProE, Solid Works, Unigraphics, AutoCAD, 3D Studio Max, Algor, & Stadd. Painted Feather Precision, LLC Minneapolis, MN 55428-1508
Contact name:
Mary Wiedner
Phone: 763 537-6466 URL:
www.paintedfeather.net
Painted Feather Precision is a Native American/S.D.B. high-speed precision machining Contract Manufacturing/Job Shop. Integrating the latest in CAD/CAM software, machine tools, cutting science and inspection equipment.Expertise in CNC machining, CAD/CAM programming, engineering, geometric tolerance & SPC. We manufacture complex parts in prototype and production quantities. Our systems are capable of solid models. Light assembly and adhesive services. End use products include avionics, space flight, navigation, communication, ordinance
devices, countermeasures, medical components. Supplying customers with cost effective quality product. PALOMAR TECHNOLOGIES INC Vista, CA 92081
Contact name:
Bryce Whiting
Phone: 760 931-3406 URL:
www.bonders.com
Palomar Technologies provides complete process and equipment solutions for precision automated assembly of optical, RF and microelectronic packages in the photonic, wireless, microwave, automotive, aerospace and medical industries. Processes include high accuracy component assembly with eutectic solder or epoxy, with precision ball bonding, and wedge bonding for fine pitch devices. PANTRONIX CORP Fremont, CA 94538-6534
Contact name:
Stanley Wang
Phone: 510 6565898 URL:
http://www.pantronix.com
Founded in 1974, Pantronix Corporation provides a wide variety of services to aerospace, medical, communications, automotive, and computer markets. We assemble and test devices for use in satellites, space probes, military and commercial aircraft, ground and naval systems and implanted medical applications. In addition we provide custom sermiconductor packaging, boards, modules, sub assemblies and box builds as well as fiber optic applications. Paramount Machine Co., Inc. Rancho Cucamonga, CA 91730
Contact name:
Greg Harsen
Phone: 909 484-3600 URL:
www.paramountmachine.com
Manufacturer of high precision components for the aerospace, defense, medical and commercial industries, with quality as it's prime focus! Parker Hannifin Corp, Seal Group Irvine, CA 92618
Contact name:
Mark Halloran
Phone: 949 851-3756 URL:
www.parkerseals.com
Parker Hannifin's Seal Group is a leading global supplier of engineered seals and sealing systems for the aerospace, automotive, marine, medical, semiconductor, chemical processing, telecommunications and commercial/industrial markets, among others. Parker manufactures ORings, hydraulic/pneumatic seals and packings, extruded and precision cut seals, metal/rubber combination seals, fastener and fitting seals and PTFE seals. Chomerics, a division of Parker's
Seal Group, also manufactures a wide range of EMI shielding and thermal management products. Parker Hannifin Corp., Stratoflex Products Divisio Fort Worth, TX 76114-3605
Contact name:
Cheryl Simms
Phone: 817 210-1211 URL:
www.parker.com/stratoflex
Manufacturer of PTFE, rubber, rigid and metallic hose assemblies; Mil-Spec and specialty applications including instrumentation, potable water, oxygen, fuel, oil, high pressure hydraulic and extreme high temperature bleed air. Also aerospace quick disconnects, break-away couplings, specialty fittings, hydraulic fuses and flow regulators. Parts Tool & Die,Inc. Agawam, MA 01001
Contact name:
Aziz S. Elias
Phone: 413 8219718 URL:
http://www.PTDINC.NET
manufacturer of both simple & complex commercial & aerospace parts. Parvus Corporation SALT LAKE CITY, UT 84115
Contact name:
Mike Southworth
Phone: 801 433-6331 URL:
www.parvus.com
Parvus Corporation is a leading North American manufacturer and systems integrator of modular computer boards, enclosures, displays and embedded systems based on the PC/104 computer standard. These rugged, Commercial-Off-the-Shelf (COTS) computing solutions feature x86 compatibility, tolerance to extreme temperatures, shock/vibration resistance, compact size, expandability, and low power consumption. Parvus products serve as modular hardware building blocks for OEMs to rapidly develop embedded computing devices manufactured for aerospace, defense, transportation, and industrial applications. For more information, visit www.parvus.com or call 801.483.1533. Paul Day & Associates Franklinton, NC 27525
Contact name:
Paul Gomez
Phone: 919 435-0766 URL:
www.pauldayassociates.com
Paul Day & Associates is an executive and technical search firm. We place candidates throughout the U.S. Our emphasis is in engineering; however, we are client-driven and fill many other positions based on our clients' needs.
PCI Geomatics Richmond Hill, ON L4B 1M5
Contact name:
Alysia Vetter
Phone: 819 770-0022 URL:
www.pcigeomatics.com
PCI Geomatics is a world leading developer of hardware/software systems for geo-imaging solutions. Since 1982, we have specialized in remote sensing, digital photogrammetry, spatial analysis, cartographic production, automated production systems, image management and on demand mapping solutions. PCI Geomatics? advanced hardware/software systems address a wide variety of industry applications including the environment, agriculture, security and intelligence, aerospace & defense, and satellite receiving stations. We have the expertise and know-how to turn images into useful information.For more information, visit www.pcigeomatics.com. PDQ Personnel Services, Inc. Los Angeles, CA 90017
Contact name:
Matty Auer
Phone: 213 408-0262 URL:
www.pdqcareers.com
Provide professional full service staffing services to private, government and not-for-profit agencies in Administrative, Aerospace, Information Technology, Financial and Medical arenas. Peco Mfg Co. Inc. PORTLAND, OR 97202-4715
Contact name:
Paul Chaney
Phone: 503 813-0369 URL:
HTTP://WWW.PECO-SUNNE.COM
Peco Mfg is a custom products mfg company making assemblies and components for the Aerospace, Commercial Jet Transport, Medical Equipment, Computer and Heavy Duty Truck OEM manufacturers, using the Plastic Injection Molding, Aluminum & Zinc Die Casting and Screw Machine processes. Sunne Controls manufacturers a wide variety of Temperature Controls for Commercial Cooking, HVAC and Agricultural applications PEI-Genesis, Inc Philadelphia, PA 19116
Contact name:
Stephanie Stocker
Phone: 215 673-0400 URL:
www.peigenesis.com
PEI-Genesis is one of the world s fastest assemblers of precision connectors and power supplies. From a large component inventory, they develop engineered solutions that support the military, industrial, medical, aerospace, transportation, and energy sectors. PEI-Genesis can build over 12 million unique connectors at a rate of more than 5,000/hour. Using proprietary automation, PEIGenesis can build just one or 10,000 pieces. PEI-Genesis offers assembly of connectors in 48
hours and power supplies in a week. Peninsula Spring Corp. Gilroy, CA 95020
Contact name:
Joe Kilmer
Phone: 408 848-3361 URL:
http://www.peninsulaspring.com
Custom, precision sheet metal stampings, washers, wire-forms, springs and tube-forms for the defense, aerospace, medical and computer industries. We excel in prototype and short runs! Peregrine Manufacturing, Inc. KENMORE, WA
Contact name:
Kirk Wallace
Phone: 425 487-9365 URL: Peregrine Manufacturing Inc. specializes in the production of splines, gears, and manufactured complete componites for the aerospace, medical, commercial, and defense industries. In 2000 Peregrine added 2 Okuma CNC Lathes, and in 2001 added a Okuma CNC Vertical Mill with a 20X40â&#x20AC;? table. This combination of machines allows us to provide our customers with gears and splines at any stage of the process. Heat treating, grinding, material, and plating are availible using our approved vendor list. Perkin Elmer Fluid Sciences, Belfab Products Daytona Beach, FL 32114
Contact name:
Bob Falkenberg
Phone: 386 257-0160 URL:
www.belfab.com
PerkinElmer, Belfab Products designs and manufactures high precision edge-welded metal bellows assemblies for diverse markets, including aircraft/aerospace, industrial, medical/biomedical, power generation, semiconductor, and ultra high vacuum. Bellows products are available in a wide range of sizes and materials, and are suitable for extreme operating conditions. Typical applications include accumulators, actuators, aneroids, dampening devices, expansion joints, flexible couplings, fuel drains, mechanical seals, pressure sensors, pressure switches, reservoirs, temperature sensors, torque couplings, valve stem seals, and volume compensators. PerkinElmer, Belfab Products also offers contract assembly services including engineering, manufacturing, welding, upper-level assembly, testing, packaging, and shipping. A certified Class 100/1000 clean room assembly environment is available as required.An ISO 9001certified organization with world class cellular manufacturing, PerkinElmer, Belfab Products has a quality image that is recognized in the industry. Some of the honors received include Industry Week's PERL Technologies, Inc. Arlington, VA 22203
Contact name:
MR D PERLMUTTER, PE
Phone: 703 807-2714 URL:
www.perltech.com
PERL Technologies is a consulting firm specializingin product design and development for multiple applications: telecommunications, aerospace, military, commercial, industrial, and consumer. Since 1987 PERL Technologies has been applying engineering expertise to the transfer of technologies from the research and development environment to the ultimate marketplace.In addition to demonstrated design and production capabilities, PERL Technologies has expertise in analysis to support overall project objectives. Structural, thermal, and vibration analysis, as well as simulations, are used to augment the production process Peter J. Van Bergen Williamsburg, VA 23185-3660
Contact name:
Peter J. Van Bergen
Phone: 757 220-2649 URL:
www.petervanbergen.com
Peter J. Van Bergen, patent attorney, is one of Virginia’s “Legal Elite in Intellectual Property”, awarded to him since 2003 by Virginia Business Magazine. Patent practice (to include NASA and Navy clients) covers acoustic systems, sonar, computer and software systems, laser-based systems, concrete construction, sports/fitness equipment, medical equipment, apparel, military systems and aeronautic/aerospace systems. BSEE (1981, Bucknell University) and JD (1986, College of William and Mary). Petroferm Inc. Gurnee, IL 60031-1244
Contact name:
Bill Breault
Phone: 859 3124602 URL:
www.petroferm.com
Petroferm, Cleaning Products develops manufactures and markets environmentally responsible cleaning agents to meet the increasing demands of today’s manufacturing operations. Sold under the AXAREL, BIOACT, CleanSafe, HYDREX, LENIUM and RE-ENTRY trade names, our products are used to clean precision parts during production, ranging from simple hand wipe applications to sophisticated multi-stage cleaning systems. Our major markets are Aerospace, Defense, Electronics, and Medical as well as other high tech industries. Petron Plus Global, Inc. Hutchinson, KS 67504
Contact name:
Tanner Engweiler
Phone: 620 663-1800 URL:
www.petronplusglobal.com
For over thirty-two years, we have been providing Petron Plus, PPX, and Petronomics products to the aviation, aerospace, city/states agencies,commercial properties, industrial plants, commercial, mining/quarries & cement plants, automotive mfg., industrial fleets, motorsports race teams, metalworking facilities, oil companies & refineries, pulp & paper mfg., power plants, printing & publishing, recreation operations, steel/metal operations, transportation operations, university & schools, military and government operations around the world. We manufactures and distribute over 400 products with over 1,400 sku (part numbers) numbers.
Philip Specialty Company Grand Prairie, TX 75050
Contact name:
Judy Pinson
Phone: 972 264-5668 URL: Machine shop specializing aircraft, medical, telecommunication part, Sub_Assembly, and in custom high precision machining. Phoenix Advanced Technology Research Group, Inc. ( Peoria, AZ 85381
Contact name:
Russel Traher
Phone: 623 486-1513 URL:
www.patrg.com
DESCRIPTION OF ACTIVITIES:PATRG is an Information Technology products and service provider that specializes in developing and integrating systems, software, and simulation products in support of government agencies and commercial enterprises worldwide.Products: Image processingServices: Technical and management studies, strategic planning, systems and software life cycle process development, evaluation of existing computer systems, systems engineering, design and development of new computer hardware and software, project management, documentation and training. Phoenix Aerospace,Inc. CARSON CITY, NV 89706-0482
Contact name:
Jack Lynch
Phone: 775 882-9700 URL:
Photo Research, Inc. Chatsworth, CA 91311-4135
Contact name:
Mike Klein
Phone: 818 725-9750 URL:
www.photoresearch.com
Photo Research is the world leader for precision instruments that measure light and color. They have delivered measurement solutions, serving the display, automotive, aerospace, lighting, motion picture, research and development and related industries for over 65 years.Photo Research has three main product lines. The Spectra product line offers systems for research, quality control and on-line testing. It includes the only truly portable battery operated Spectroradiometer; the PR-655 SpectraScan, the multi-aperture PR-670 & the patent pending PR-680 SpectraDuo (the first and only combined spectroradiometer and PMT based photometer). They include a high resolution touch screen color display, SecureDigital card, rechargeable Li-ion battery and USB/Bluetooth connectivity. The PR-705/715 SpectraScan complements this line with an industry first automated aperture wheel with six apertures.The Pritchard line originated with
the industry workhorse the PR-1980 series. It is the most widely used photometer. The newer addition the PR-880 is the only fully automated filter photometer available. It is ideal for automated factory and ATE/OEM environments.Photo Research developed the first video photometer over 20 years ago. The latest is the PR-920 digital video photometer. Video instrumentation provides high resolution inspection of CRT and flat panel displays and instrument panels. The PR-905 complements this line. PHOTONIS USA, Inc. Sturbridge, MA 01566
Contact name:
Customer Service
Phone: 1-508 347-4000 URL: www.photonis.com PHOTONIS USA, INC., located in Sturbridge, Massachusetts,is the world's leading manufacturer of detectors for scientific instruments. The company is certified to ISO 9001-2000 and manufactures and distributes Lynx sensors and other low-light digital imaging solutions, Channeltron速 Mass Spectrometer detectors, Microchannel plates, Advanced Performance MCP detectors, Time-of-Flight detectors, flexible fiberoptic light guides, and custom glass formulations. Our focused manufacturing capabilities allows PHOTONIS to design and manufacture custom sensors and detectors for use in military, space, physics and security markets. Pic Design Middlebury, CT 06762
Contact name:
William J. Nardello
Phone: 203 758-8272 URL:
www.pic-design.com
Founded in 1954, PIC Design manufactures standard catalog and special build to print precision mechanical components in metric and inch sizes. Products include Positioning Tables, Lead Screws & Nuts, Linear Motion Systems, Ball & Crossed Roller Slides, Modular Framing Elements, Gears, Racks, Shafts, Bearings, Clutches, Brakes, Couplings, Positioning/Timing Belts & Pulleys. Quantities supplied range from prototype through production. Markets served include automation, electronic components, fabrication/test equipment, medical equipment, instrumentation, optics and aerospace. Pillar Precision, Inc. Lake View Terrace, CA 91342
Contact name:
Art Sitiso
Phone: 818 897-0200 URL: Manufacturer Precision machined parts, assembly for aerospace and other industries including Die-Set manufacturer and supply. Plasco Formulating Divison, Inc. Romeo, MI 48065-4914
Contact name:
Dennis Harris
Phone: 586 752-0510 URL:
www.plascocorp.com
We manufacture all types of aircraft, aerospace, automitive,tooling, gages, fixtures, masters ect. We also manufacture a complete line of composite materials for the same industries, along with adhesives and coatings. Plastic Fab, A Kaman Aerospace Group Co. Wichita, KS 67213-1239
Contact name:
Alan Szymanski
Phone: URL: http://www.pfabks.com
Plasticor Inc. Lachine, QC H8T 2V3
Contact name:
Joseph Di Guida
Phone: 514 636-9630 URL:
www.plasticorinc.com
Plastic injection molding and mold makingAssembly and decorative services providedPrototype and RD service offeredTurn Key service Plastics Technology Labs Inc Pittsfield, MA 01201
Contact name:
Carl Olson
Phone: 413 499-0983 URL:
www.ptli.com
Independent plastics testing lab, A2LA accredited to ISO 17025. Analytical, electrical,thermal, mechanical, optical, rheological, weathering of plastics elastomers & composites.Military & aerospace. PLX Inc. DEER PARK, NY 11729-4720
Contact name:
Michelle Komatsu
Phone: 631 586-4190 URL:
www.plxinc.com
TO VIEW ALL OF OUR PRODUCTS, PLEASE VISIT OUR WEBSITE WWWW.PLXINC.COM PLX is dedicated to finding practical solutions to complex optical problems. We provide solutions for optical systems where interferometer-quality wavefronts and great optical stability are essential. Companies and governments worldwide count on our optics and our expertise to meet seemingly impossible optical requirements in critical military, aerospace, industrial and medical applications. Regardless of your application, PLX engineers, who are specifically trained and experienced in optical, laser and imaging systems, work closely with you to adapt PLX technology to your requirements.
Polymicro Technologies LLC Phoenix, AZ 85023-1200
Contact name:
Gary W. Stolte
Phone: 602 375-4100 URL:
www.polymicro.com
Polymicro manufactures multimode, step-index fused silica optical fibers with polyimide, acrylate, silicone and aluminum buffers; solarization resistant optical fibers; hollow silica waveguides; fiber optic cables and assemblies; high strength, high temperature flexible fused silica capillaries; square capillaries; light guiding capillaries; custom precision silica and quartz rod and tubing pieces; custom shaped rod and tubing; multilumen tubing; telecom ferrules and sleeves. Polynetics, Inc. Corona, CA 92879-6625
Contact name:
Robert Pernice
Phone: 951 808-4903 URL:
http://www.polynetics.com
Contract supplier of CNC machined precision parts for the aerospace and general commercial industries including petrochemical, automotive, and health and fitness equipment.Also provides precision dynamic balancing of rotating parts including fans, impellers, blowers, motors, optical and other types of rotating assemblies. Positron Systems, Inc. Boise, ID 83701-2020
Contact name:
CURT RIDEOUT
Phone: 208 514-4572 URL:
www.positronsystems.com
Material characterization, non-destructive testing and life remaining predictions for components based upon empirical data. Technology probes the microstructure of materials, defining defect density well before the crack nucleation phase. Mobile capability and is applicable to all types of materials, metals, single crystalline structures, composites and polymers. Power Engineering, Inc. Irvine, CA 92606-5008
Contact name:
Cynthia Rhodes
Phone: 949 260-9716 URL:
www.powerengineering.com
Power Engineering provides scientific & engineering services pertaining to electrical, mechanical & materials engineering with emphasis on large rotating machinery and auxiliary systems. Power Engineering provides services to industries such as the electric utilities, aerospace, manufacturing, petroleum and transportation industries through scientific testing (modeling, design, performance, vibration testing) and providing answers to our clients through scientific analysis & recommending a plan of action (repair, upgrade, balancing, commissioning). For more information visit www.powerengineering.com .
Power Ten San Diego, CA 92121
Contact name:
Brandon Ratliff
Phone: 858 458-0281 URL:
www.elgar.com
Elgar Electronics produces Programmable AC Power Supplies and Programmable DC Power Supplies. Elgar Electronics is a world leader in programmable power supplies and related power products sold under the Elgar, Sorensen, and Power Ten brands. The companyâ&#x20AC;&#x2122;s technology plays a key role in industries such as automotive, aerospace, medical, telecom, semiconductor, defense, and OEM applications. Elgarâ&#x20AC;&#x2122;s comprehensive product range includes AC power sources, programmable DC power systems and loads, solar array simulators, and integrated rack power subsystem services. Elgar Electronics is located in San Diego, California. PPI Aerospace Acquisition
Contact name:
Tina McCrillis
Phone: URL:
PRECINDA GROUP Toronto, On M3A 1L5
Contact name:
Tim Creasy
Phone: 416 818-5911 URL:
www.precinda.com
Precinda Inc. is a leading supplier of assemblies, components and machining services to a range of industry sectors, including Aerospace, Defense and Turbomachinery.Through our operating division, KK Precision (established in 1963) and TDP Aerospace (established in 1980), we are building on our strengths in the high tolerance machining of engineered materials to become your complete manufacturing partner. Our internal capabilities and our extensive supply chain partners allow us to provide a wide range of products to our customers, including:"" Modules for gas turbine engines"" Gas turbine engines casings"" Gas turbine combustor housings"" Aeroengine fan cases"" Airframe structural components"" Complex hydraulic manifolds"" Fuel system valves"" Intertial guidance system assemblies"" Precision parts deburred under magnificationsOur Engineering Services capability allows Precinda to work closely with your integrated product team to ensure your new product is released on time and at the lowest manufacturing cost. For those customers looking to further reduce their costs, Precinda offers contract manufacturing services, from basic kitting of parts to the production of complete products; tested, packaged and ready to ship to your assembly line or final customer.Precinda, challenge us and watch us perform! Precision Measurements and Instruments Corp. Corvallis, OR 97333-9285
Contact name:
Mike Maillet
Phone: 541 753-0607 URL:
www.pmiclab.com
PMIC (Precision Measurement and Instrument Corporation) is a private, full service test facility and Instrument developer devoted to providing highly accurate thermophysical, optical and micromechanical measurements on composite materials, components and structures. PMIC, founded in 1991, has performed over 1500 test contracts for the aerospace, electronics, composite manufacturing and materials development industries. Our unique capabilities include the use of a Michelson laser interferometer with nanometer resolution for thermal expansion (CTE) from <40K to >1500K on samples of arbitrary shapes and sizes; real-time measurements of moisture expansion (CME); and a variety of thermal conductivity <40K to >1500K and optical property test facilities. PMIC also has extensive experience in determining composite properties such as microyield strength (MYS) and microcreep, as well as surface emissivity/absorptivity, specific heat and thermal cycling behavior. For more information on all of PMICâ&#x20AC;&#x2122;s services and capabilities, visit our website at www.pmiclab.com Precision Metals Corp. Bayshore, NY 11706-1206
Contact name:
Tony Figlozzi
Phone: 631 586-5032 URL:
www.precisionmetalscorp.com
Precision Metals Corp is a woman owned small business, ISO 9001:2000 certified, providing sheet metal and machining services for the military, aerospace, automotive, medical and commercial industries since 1987. Our primary products include machining, stamping, cabinets, racks, chassis, enclosures, brackets, frames, miniature parts and aerospace components. Precision Molded Products, Inc. Riverside, CA 92503-4968
Contact name:
Ron Edsell
Phone: 951 354-0779 URL:
www.precisionmoldpro.com
Design and manufacture of custom molded parts using injection,compression,RTM, and bladder molding processes. Products manufactured include the commercial, aerospace, and medical industries. Precision Sensors Milford, CT 06460
Contact name:
Tim Straub
Phone: 1-203 877-2795 URL: www.precisionsensors.com For over 30 years, Precision Sensors has designed and manufactured high quality pressure, flow, liquid level and airspeed/altitude products for aerospace and defense applications.The ability to deliver competitive designs quickly has helped Precision Sensors customers meet critical deadlines. Precision Sensors designs and manufactures pressure switches qualified to MIL-S9395 and is a Qualified Products List supplier to the U.S. Government. Precision Sensors is committed to providing products and services to our customers at those levels of quality, performance and reliability that will ensure complete customer satisfaction and compliance with
contractual requirements. Precision Sensors maintains a Quality System in accordance with the requirements of ISO9001:2000/AS9100. Precision Speed Mfg. Co. Windsor, CT 06095
Contact name:
Nosheena Ejaz
Phone: 860 522-2830 URL:
www.PrecisionSpeedMfg.com
Manufacturer of Complex machined components and assemblies to the aerospace industry,Capabilities include precision gears and splines. Precision Tube Bending Santa Fe Springs, CA 90670-5173
Contact name:
Philip Stephen
Phone: 562 407-3200 URL:
www.ptbinc.com
Since 1957, PTB provides tube bending and tube & duct assemblies for military and commercial aerospace applications. We specialize in high quality, 1/32-inch to 10-inch tube diameter bending and fabrication of thin wall materials and can offer manufacturing design support. Other processes include welding (NADCAP approved), end finishing, swaging, painting and has an approved FAA repair station certificate. - Bending and Fabrication of all Aerospace Materials PTB can fabricate and support all tubing systems: (oxygen, hydraulic, fuel, bleed air). Precision Waterjet Concepts Inc Peqout Lakes, MN 56472-2904
Contact name:
Joe Quaal
Phone: 218 568-5052 URL:
www.waterjetconcepts.com
We will work with you to develop a cost-effective solution for your application. We want to achieve an efficient process using our 5-axis waterjet services that gets results. We can handle any size job with our 8'x12'x3' work envelope.3-dimensional cutting capabilities-3'verticle travel,370 of yow rotation,205 of pitch rotation.Accuracy on 3D +/-.005.2D+/-.003.No heat affected zone eliminates the possibility for microcracks, thus making this process well suited for aerospace. Precisionmatics Co. Inc. West Winfield, NY 13491
Contact name:
JOHN PUSTAY
Phone: 315 822-6324 URL:
PRECISIONMATICS.COM
Modern CNC job machine shop specializing in turning of stainless steel and high temp. alloys. Servicing aerospace,industrial and commercial customers.In business 40 yrs family owned 55+ employees.Fully computerized accting,estimating,job tracking and inspecting. Current cust GE engine sys,Goodrich aerospace & Remington Arms. AS9100 ISO9001:2008 certifiedSelected top
10% performer for all customers. Prefontaine Associates Inc Arcadia, CA 91006-3210
Contact name:
Steve Prefontaine
Phone: 626 821-4828 URL:
www.technicalpublications.com
Produce technical manuals to wide range of commercial and military aerospace specifications, including ATA 2200,ATA 2000, and military formats. Capabilities include SGML text and CGM Level 4 graphics. We have a wide range of component expertise, including hydraulic, electronic, and electromechanical components. See www.technicalpublications.com Prescott Aerospace, Inc. Prescott Valley, AZ 86314
Contact name:
Pam Wagner
Phone: 928 772-7605 URL:
www.prescottaerospace.com
Preservo Paint & Coatings Mfg. Co. Houston, TX 77047-7011
Contact name:
Pamela Schneider
Phone: 713 434-9900 URL:
www.preservo.com
We are a sixty-two year old company who specializes in high performance coatings. We believe in economics through high performance products. Our company sent the first coating into space and continues to utilize cutting edge technologies in our work with our clients. We are always interested in consulting by telephone, fax or email, on any project, large or small. Pressley Mold & Machining, Inc. Matthews, NC 28104-5996
Contact name:
Sandie Pressley
Phone: 704 684-0515 URL:
www.pmm-cnc.com
Pressley Mold & Machining, Inc. is a Woman-Owned Small Business whose goal is to offer the highest quality machined parts with on-time deliveries. We specialize in alternative for OEM parts, dies and fixtures, prototypes, and small compression molds. All our complex geometry are handled with our in house CAD/CAM system. We can machine most materials. Our staff with over 60 years experience machining in a variety of fields, such as: aerospace, forging dies,hydraulic pumps, live support equipment and molds for the rubber and plastic industries; we would welcome the opportunity to provide a quote for any of your machining needs. Pressure Systems, Inc. Hampton, VA 23666-1573
Contact name:
Denise Topping
Phone: 757 865-1243 URL:
http://www.pressuresystems.com
Pressure Systems is a leading producer of level and pressure transducers, pressure and temperature scanners and data acquisition instrumentation for environmental, industrial and aerospace applications. PRICE Systems, LLC Mount Laurel, NJ 08054
Contact name:
Gretchen Martin
Phone: 856 608-7212 URL:
www.pricesystems.com
PRICE Systems, the world leader in Program Affordability Management solutions, provides organizations with the visibility to confront project investment decisions through sophisticated cost estimation products and services. Providing you with true insight into what drives cost. Primavera Systems, Inc Bala Cynwyd, PA 19004
Contact name:
Christopher Sala
Phone: 610 949-6952 URL:
www.primavera.com
Primavera is the largest independent provider of collaborative resource, project and portfolio management solutions. Primavera's world-class software and services are used by federal agencies to meet federal mandates, increase operating efficiencies, and achieve mission objectives. Primavera provides total program performance solutions that span the project lifecycle from investment justification and business case planning to actual performance and cost analysis empowering government to ""get to green and beyond."" Analysts have recognized Primavera as an IT Project Portfolio Management leader. Primus Metals, Inc. Lakewood, CO 80215
Contact name:
Randy Brodsky
Phone: 303 235-8944 URL:
www.primusmetals.com
Primus Metals, Inc. performs machining and manufacturing services for a wide variety of customers and industries including medical, aerospace, automotive, computer/technology and transportation. Our company philosophy focuses on cost reduction, on-time delivery, superior quality and “turn-key” manufacturing. Additional emphasis is placed on customer service and customer communication, as well as the cosmetic appearance of all our manufactured products. We recognize the individual needs of each of our customers and tailor resources to accommodate those needs. Our mission is to become an “extension” of our customer’s business, responding to their manufacturing needs as if Primus Metals is an internal division of their own organization.
Proceco Ltd Montreal, QC H1N 3T7
Contact name:
Chantal Rousseau
Phone: 514 254-2723 URL:
www.proceco.com
Aqueous cleaning systems for maintenance, rebuilding, remanufacturing, high production, & precision cleaning. Design & manufacture; spray immersion, rotary, drum, cabinet, turntable, & conveyor parts washers. Also automated dip tanks for surface treatment and cleaning. Specializing in custom designed integrated cleaning systems that incorporate complementary technologies such as: automation, hydro-deburring, cooling & drying servicing the automotive, aerospace, military, rail, & general manufacturing industries. QS-9000TE & ISO-9001 certified. Process Fab Inc. Santa Fe Springs, CA 90670
Contact name:
Eric Clack
Phone: 562 921-1979 URL:
HTTP://www.processfab.com
We have capabilities to machine up to 30 feet using 3, 4 or 5 axis machining with 20 ton crane(s) capabilities. Within our facility we have a plaster pattern shop, lay up shop, composite tooling shop, fabrication shop, machine shop, assembly shop and a proof load area.We design, build, fabricate & refurbish FAJâ&#x20AC;&#x2122;s, Composite Tooling, Invar Lay Up Tools, Plastic Patterns, Bond Tooling, Transfer Molds, Transporters, Ground Support Equipment, Large Weldments, Shipping Containers, Work Stands/Facilities, Structures, Flight Hardware and Test Equipment etc. using Catia, Pro-E, Unigraphics or Auto Cad. Prodesco, Inc./Secant Medical PERKASIE, PA 18944-1712
Contact name:
MR T DERTOUZOS
Phone: 215 257-6566 URL:
www.prodesco.com & www.secantmedical.com
Prodesco, Inc./Secant Medical designs, develops and manufactures engineered fabric and cloth structures for the medical, industrial and aerospace industries, utilizing a variety of textile processes such as warping, knitting, weaving, braiding scouring and heatsetting. profile machine products madison, CT 06443
Contact name:
Ralph Minore
Phone: 203 245-2532 URL: We are machine shop that does short run up to 1000 pieces. We do aircraft,aerospace,medical and commerical parts alsodo prototype work.
ProGen Systems Aerospace, Inc. Saint Peters, MO 63376-4006
Contact name:
William S. Scudero
Phone: 636 397-0165 URL:
http://www.progensystems.com
ProGen Systems provides 3D and 2D CAD engineering design and modeling. Stress/vibrations analysis and CAM programming are available. Full 3D motion of mechanisms and force analysis of complex assemblies can be performed. Progressive Alloy Steels Unlimited L.L.C. Hartsville, SC 29551
Contact name:
Bruce R. Olson
Phone: 843 383-2182 URL:
www.progressivealloy.com
Specialty Steel Warehouse stocking Stainless Steels, 17-4PH, 15-5PH VAR, 440C, 440CVAR,321,347, 416HT, 254SMO, 13-8MO and Nickel Alloys, All 300 Series Stainless. TP316 up to 18"" Diameter, also Cronidur 30 15-5PH and 17-4PH stocked in flat bar and plate up to 8"" thick. Saw cutting up to 20"" diameter, plate cutting up to 13"" thick. Project Masters Inc ELLICOTT CITY, MD 21043-3369
Contact name:
APRIL J O'KOREN
Phone: 443 755-9300 URL:
www.projmasters.com
Project Masters, Inc. is a project management consulting and training company that specializes in aerospace, banking, defense contracting, education, engineering, manufacturing, government, information technology, consumer products, printing, and simulation industries. We have a client base of over twenty companies that we work with to provide their training and consulting needs. Our current customers include OPM, FAA, The Department of Health and Human Services, the Governor's Office of Crime Control & Prevention, and the Maryland Department of Budget and Management, the United States Department of Labor, Lockheed Martin and McCormick and Company.. Project Masters Inc. has been certified as a participant in the U.S. Small Business Administration’s (SBA) 8(a) BD program. Additionally, we have been certified as a Small Disadvantaged Business (SDB) in the Federal Government’s SDB program. We offer Project Management classes in over 20 different subjects – including Project Management Basics, Budget, Scope, Leadership, Risk, Communication, MS Project, and Visual Basic. We help train personnel for PMP certification. We help set up Project Management Offices (PMOs) or Program Management Offices. We can provide Project Managers and support teams as needed. We have personnel proficient in MS Project, Primavera, Sure Track, Project Scheduler, Turbo Project, Project Exchange, Visual Basic, MS Access, SQL, Word, Excel, PowerPoint and various other software applications. Project Masters Inc. Ellicott City, MD 21043
Contact name:
Brian Wajda
Phone: 410 241-9112 URL:
www.projmasters.com
Project Masters, Inc. is a project management consulting and training company that specializes in aerospace, banking, defense contracting, education, engineering, manufacturing, government, information technology, consumer products, printing, and simulation industries. We have a client base of over twenty companies that we work with to provide their training and consulting needs. Our current customers include OPM, FAA, The Department of Health and Human Services, the Governor's Office of Crime Control & Prevention, and the Maryland Department of Budget and Management, the United States Department of Labor, Lockheed Martin and McCormick and Company.. Project Masters Inc. has been certified as a participant in the U.S. Small Business Administrationâ&#x20AC;&#x2122;s (SBA) 8(a) BD program. Additionally, we have been certified as a Small Disadvantaged Business (SDB) in the Federal Governmentâ&#x20AC;&#x2122;s SDB program. Project Solutions Co. LLC Dearborn, MI 48126-2795
Contact name:
David Manon
Phone: 313 216-0168 URL:
www.projectsolutions.com
Project Solutions is a professional services company focusing on project management, engineering and system development. We have excellent experience working for Large Defense Contractors assisting them in meeting their Contract Requirements and Successfully completing projects within Budget. We have performed these services in the automotive, aerospace & defense, utilities and pharmaceuticals industries. We can perform turnkey projects or supply expert support services to customer project teams. We improve our customers business operations, develop processes and capabilities, and expedite product development and launch. ProPlas Technologies Gardena, CA 90248
Contact name:
Scott Munch
Phone: 310 768-3023 URL:
www.proplastec.com
Custom injection molder providing the entire array of contract manufacturing services including product design & engineering, prototyping, tooling, injection molding, supply chain management, secondary operations, packaging, distribution and order fulfillment. Proton Aerospace Corporation Jupiter, FL 33468-2165
Contact name:
Chris Yiannas
Phone: 561 624-5045 URL:
www.protonaerospace.com
Aerospace- R&D, Systems Engineering Design Development, Prototyping. Applications- Aircraft, Missiles, Turbomachinery, Hypersonics, Scramjets, Ramjets, Pulse Detonation Engines, GDL, Guidance Systems Integration
Public Domain Aeronautical Software Santa Cruz, CA 95061-1438
Contact name:
Mr Ralph Carmichael
Phone: 831 454-9754 URL:
www.pdas.com
For many years the Air Force, Navy, NASA and educationalinstitutions have sponsored the development of computer software that is useful to aeronautical engineers, airplanedesigners, and aviation technicians. Public Domain Aeronautical Software was founded to make this treasure house of valuable software available to the aeronautical community at an easily affordable price for use on desktop computers.These programs include complete public domain source code, descriptions, and sample cases (both input and output). All of the programs come ready to execute under Windows and most of the programs have Macintosh and Linux executables.All of this is available to you on the CD-ROM ""Public Domain Computer Programs for the Aeronautical Engineer"".The source code is not copyrighted and may used in whole or in part in any of your aeronautical studies.Most were developed under NASA or DOD sponsorship, but some are contributions from individual authors and all have significant value added by PDAS. Purchasing Solutions, LLC Beaverton, OR 97006-7652
Contact name:
Bruce D. Hollingsworth
Phone: URL: http://www.ps.to Purchasing Solutions is a veteran owned small business that provides a cost based approach to supplier rating, evaluation, and supplier improvement. The software was originally developed for aerospace and defense companies that needed to meet FAR requirements for quality and source selection. PYE & HOGAN LLC Old Saybrook, CT 06475
Contact name:
Stan Stefanski
Phone: 860 388-0831 URL:
www,pyeandhogan.com
Pye&Hogan Machine Co/ is a high precision; ISO9002, AS9100/ISO9000:2000 Registered and NADCAP Accredited manufacturing services company. Pye&Hogan has been in business for 43 years, serving customers in the Aerospace, Gas Turbine and Defense Industries manufacturing high quality/precision machined components; which require CNC turning, milling and grinding of a variety og materials. Ranging from wrought, cast or forged Aluminium/Magnesium to the high temperature/exotic alloys such as; Waspalloy, Hastalloy, Rene'41 and the Inconel family of metals, all in various complexity, configuration and sizes which are obtained from mills, processors and/or distributors.We do not manufacture any proprietary products-our entire energy and resources are concentrated on serving the needs of our customers as a sub-cntract manufactures; in a Tier1 or Tier 2 relatioship. Pye&Hogan Machine Co Old Saybrook, CT 06475
Contact name:
Stan Stefanski
Phone: 860 388-0831 URL:
www.pyeandhogan.com
The Pye&Hogan Machine Co. produces precision aircraft components. Founded in 1958, serving customers in the Aerospace, Gas Turbine and Defense Industries as a sub-contract manufacturer of precision machined parts. ISO9001:2000, AS9100 and NADCAP Certified Pyradia Inc. Longueuil, QC J4G 1P8
Contact name:
Jean-Michel Barrette
Phone: 450 463-3344 URL:
www.pyradia.com
For over 30 years, Pyradia has been a major supplier of industrial heating equipment to a great number of top companies in America. We design and manufacture a broad range of standard and custom-built Ovens, Furnaces and Dryers for heat treatment at temperatures ranging from 200 degF to 3,200 degF. QSDM Inc. Mississauga, On L5T 1Z7
Contact name:
Conrad Zalai
Phone: 905 565-1800 URL:
www.qsdm.com
QSDM designs and manufactures high reliability electronic equipment for rail and aerospace applications. We specialize in high complexity, low to medium volume projects. Our capabilities include design, prototype, PCB layout, SMT/PTH/Mixed Technology Assembly, System Integration, Test and Burn-in. QSDM is involved in projects from build-to-print contracts to complete system design/qualification, supply and legacy product support. Our quality system is registered to ISO 9001:2000 and AS9100A. Quadra-Tek Arlington, VT 05250
Contact name:
Jason Underhill
Phone: 802 375-6139 URL:
www.Quadra-Tek.com
Precision custom molder of small tight tolerance thermoset and thermoplastic products. We are ISO 9001 and AS 9100 certified as well as ITAR registered. Our on time delivery is over 99%. We mold just about every thermoset and thermoplastic material including elastomers. Small to medium production runs with typical lots around 1,000-10,000 parts. Secondary operations such as: drilling, milling, tapping, machining, inserting, ultrasonic inserting, ultrasonic welding, assemblies, and de-gating. Industries we supply are military, aerospace, defense, medical, and electrical. Quality Machine, Inc. Plaistow, NH 03865
Contact name:
Gary Ciciale
Phone: 603 382-2334 URL:
www.qualitymachine1.com
Quality Machine, Inc. specializes in prototyping and CNC precision machining from 1 piece to thoUSnds of pieces. Quality Thermistor, Inc. Boise, ID 83709-2862
Contact name:
Todd Ketlinksi
Phone: 208 377-3373 URL:
www.thermistor.com
Quality Thermistor is your source for axial leaded, radial leaded and surface mount NTC & PTC thermistors. Quality Thermistor also carries the most comprehensive catalog of military-grade NTC and PTC thermistors per MIL-PRF-23648 and MIL-PRF-32192. Established in 1977, Quality Thermistor has designed and manufactured high-end temperature sensing solutions primarily for military and aerospace applications. From off the shelf thermistor temperature sensors to custom temperature probes, QTI brand temperature sensing products have been specified for mission critical applications from deep below the oceans' surface to the outer reaches of space. Quallion LLC Sylmar, CA 91342-3728
Contact name:
Michelle Higgs
Phone: 818 833-2005 URL:
www.quallion.com
Quallion LLC, founded by Alfred E. Mann, is a California-based leading supplier of specialty batteries offering superb quality and reliability designed to meet the needs of innovative medical, aerospace and defense applications. We offer a unique selection of advanced primary and rechargeable chemistries, flexible cell designs, and miniature battery management systems, to provide an optimum power solution. Qual-Pro Corporation Gardena, CA 90248
Contact name:
BRIAN SHANE
Phone: 310 329-7535 URL:
www.qual-pro.com
Qual-Pro Corporation is an ISO 9001, AS9100 registered contract electronics manufacturer that builds products for customers in a wide range of industries including aerospace, telecommunications, industrial controls, medical devices, and professional audio/video. We have over 37 years experience building these products right the first time. We offer a diverse collection of services to meet the needs of our clients that range from turnkey & consignment electronics manufacturing to in-circuit & functional testing as well as product burn-in and packaging. QualTech Enterprises, Ltd DBA: AnnLor Sales Medford, NY 11763-2220
Contact name:
Steve Fazio
Phone: 631 345-0704 URL:
www.annlorsales.com
All aspects of manufacturing for the Aerospace, Medical, Microwave, Communications and Robotics industries. We supply parts and services that require CNC Milling, CNC Turning, Screw Machine, Sheet Metal, Stamping and Assembly. We work in all metals and plastics, in quantities from proto-type through production. Quantum CNC Inc. Whitby, On L1N 9T3
Contact name:
Laura Gleeson
Phone: 905 434-8000 URL: Quantum CNC Inc is an ISO9000 Registered company whichmanufactures custom parts for a variety of industries,including nuclear & aerospace. Experience with all types of metals & plastics as well ashigh tolerance requirements.Equipment includes: CNC 4-axis machining centres & turningcentres, 5-axis wire EDM & 5-axis CNC CMM capability. QUANTUM COMPOSERS INC Bozeman, MT 59772-4248
Contact name:
Will Bomar
Phone: 406 582-0227 URL:
www.quantumcomposers.com
Quantum Composers is an industry leading manufacturer of digital delay pulse generator technology, laser micromachining systems and products. Our core competencies are exhibited in design, engineering, and manufacturing excellence with customer service as a top priority. Quantum Environmental, Inc. Raleigh, NC 27607
Contact name:
Michael Melia
Phone: 919 852-3595 URL:
www.QUANTUMCOs.com
Quantum Environmental, Inc. (Quantum) is a full-service environmental consulting and remediation firm based in Raleigh, North Carolina. The Company serves firms in the chemical, textile, electronic and aerospace industries, as well as furniture manufacturers, petroleum, dry cleaning, food products and transportation industries. Quantum provides environmental services to firms in the legal, financial, and real-estate sectors and for State and Federal governmental agencies, municipalities, and school districts.Our remedial services include asbestos/leadpaint/mold surveys and abatement, demolition, Underground Storage Tank (UST) closures, soil/groundwater remediation system installation, and other field/construction-related services. Environmental Site Assessments, subsurface investigations, permit preparation, wetland studies and compliance audits are among the technical services Quantum performs. Quantum Leap Electronic Components, LLC Brentwood, CA 94513
Contact name:
Linda Jackson
Phone: 925 634-4211 URL:
www.militarypartsonline.com; www.allcomponents.net
stocking distributor electronic components of Military, Commercial & Obsolete parts. IC's (integrated circuits) Resistors, Capacitors, Connectors, MIL, Rad Hard, Aerospace, WomanOwned, Minority, Discriminated, Native American, and Very Small Company.Military, Commerical, Industrial, Aerospace electronic components. Provide assistance 24/7 in Emergency Line down Situations.Engineering and technical assistance in Critical Line Down Situations. R & B Plastics, Inc. Anaheim, CA 92801
Contact name:
Dick Young
Phone: 714 2298419 URL:
randbplastics.com
R & B PLASTICS HAS BEEN IN BUSINESS SINCE 1969, WE ARE AN APPROVED SUPPLIER FOR MOST OF THE MAJOR AEROSPACE COMPANIES. R & R Technologies LLC Edinburgh, IN 46124-1100
Contact name:
Mike McCormick
Phone: 812 526-2655 URL:
www.rrtech.com
RRT specializes in rotationally molded custom-designed plastic parts. Industries served are: automotive, aerospace, industrial, and commercial. We are an ISO 9001 certified supplier. Large portion of business is in plastic returnable pallets, and material handling dunnage products. We own the molds for some material handling containers and pallets, so no tooling costs involved for the customer. R A Industries, Llc Santa Ana, CA 92704
Contact name:
Thomas P Hyland
Phone: URL: www.ra-industries.com In business since 1973. Specializing in precision machined parts for aerospace, commercial, oil tool industries. Bronze supplier for Boeing, quality system approved BQMS. R F Schiffmann Associates, Inc. New York, NY 10024-2401
Contact name:
BOB SCHIFFMANN
Phone: 212 362-7021 URL:
www.microwaveinnovations.com
Contract R&D laboratory specializing in applications of microwave heating. Over 40 years experience in all areas of microwave heating. Microwave ovens, foods, packaging, cookware, and product testing. Industrial microwave heating systems: design,applications R&D, for foods, chemicals, pharmaceuticals, aerospace and more. Expert witness in microwaves heating: patents, accidents, injuries,fires, more. Seminars and training courses in microwave heating & applications. R J D Machining Parker, CO 80134-9052
Contact name:
Terry Taggart
Phone: 303 841 URL: http://www.rjdmachining.com 20 Year old Precision Machining company specializes in the ""tough"" jobs. Expertise in medical device, aerospace, photonics, and computer components. New equipment includes horizontal mill, and automated Brown and Sharpe Coordinate Measuring Machine. Our product goes directly to your shelf, no need for Q.C. R S Precision Industries, Inc. Farmingdale, NY 11735-6632
Contact name:
Robert Savitzky
Phone: 631 249-2600 URL:
http://www.rsprecision.com
R.S. Precision Industries is an ISO-9000:2008 registered contract manufacturer. We partner with our customers to help them achieve their goals while reducing total cost. We excel at problemsolving; ""headache"" jobs are our specialty! We are very successful with complex, closetolerance, small to miniature parts, especially those with Electrical Discharge Machining (EDM). Our capabilities include Wire and CNC Sinker EDM, CNC Milling, Turning, and Grinding, Engineering, Fixturing, and Critical Deburring. We serve the Medical, Aerospace, Printing, Valve, Sensor and Optical Industries. R. C. Kletzing, Inc. Southampton, PA 18966-4047
Contact name:
John R Greisiger
Phone: 215 357-1788 URL: We are a precision parts manufacturer specializing in small sizes down to .020 diameter. Our main customer base consists of the Medical and Aerospace fields as well as many others. Primarily our facilities use cnc and conventional screw machines to produce to exacting tolerances. Materials of expertise are varied, machining parts from stainless to teflon (ptfe), from copper to tool steel. ""When all others fail to get the job done right, they come to us!"" R.A.H. Design, Inc. Austin, TX 78728-7627
Contact name:
Rodney A. Herman
Phone: 512 252-0200 URL:
www.rahdesign.com
Precision machining of metal and plastics, mechanical design and small parts assembly and manufacturing. Main Customer Base:- DOD, Aerospace, Medical and Instrumentation R.P. Luce & Company, Inc. NORTHPORT, NY 11768-0418
Contact name:
RICHARD F BOZIWICK
Phone: 631 754-5064 URL:
HTTP://WWW.CASESRPLUCE.COM
Supplier of metal and plastic carrying cases, shipping cases and containers.Authorized Dealer for Hardigg, Pelican and Zarges cases. Authorized distributor of the Riverhawk Free Flex Pivot. R.T.M. Machining Irwindale, CA 91706
Contact name:
RALPH T. MACIAS
Phone: 626 851-2440 URL:
www.rtmmach.com
R.T.M. Machining is a Job Shop which manufactures machined parts for the Aerospace and Commercial Industry. Rache Corporation Camarillo, CA 93012
Contact name:
Steve Wisuri
Phone: 805 389-6868 URL:
http://www.rache.com
Rache corporation provides thin-material laser cutting,laser welding,helium leak testing and laser marking services to the medical,aerospace,automotive and electronics industries. Materials processed include brass,copper,stainless steel,titanium,Inconel,platinum,aluminum,molybdenum and many other high temperature alloys in thicknesses ranging from .0005 inches to .060 inches. Non-metals such as Teflon, Delrin,acrylics and many others can also be laser cut. Laser welding services include joint design,material selection and leak detection. Laser marking is provided for all metals and some plastics and is permanent and practical. RADIOMETRICS MIDWEST CORP Romeoville, IL 60446-1349
Contact name:
DENNIS ROLLINGER
Phone: 815 293-0772 URL:
www.radiomet.com
Radiometrics EMC compliance engineering center ensures passing results for all of your EMC compliance needs. Radiometrics Midwest Corporation is an independent Electromagnetic
Compatibility (EMC) compliance center. Testing at this American Association for Laboratory Accreditation (A2LA) accredited laboratory is performed by EMI engineers certified by the National Association of Radio and Telecommunications Engineers (NARTE). Dedicated to performing only EMC services Radiometrics has helped customers around the world to achieve compliance with Aerospace, Commercial, Medical, Military, and Transportation Industry specifications. They are familiar with all types of electronic equipment and what it takes to correct any EMC problem. Radstone Technology Corporation, Part of GE Fanuc Billerica, MA 01821-4111
Contact name:
David Ashton
Phone: 44 1327 359444 URL: www.gefanucembedded.com Radstone Embedded Computing is the world's leading independent supplier of embedded COTS (commercial off-the-shelf) computer products, subsystems and support software for defense and aerospace applications. A key Radstone strength is the company's experience and expertise in ruggedization: the design, development and manufacture of electronics products designed to operate in the harshest mission-critical environments. Five ruggedization options are offered. Radstone numbers all of the world's leading defense contractors among its customers, and Radstone products have been selected for numerous major programs including the ADCAP/ACOT submarine missile, the ATFLIR pod, AWACS, CEEP, EuroFighter and MLRS.The Radstone product portfolio features a range of PowerPC Processors based on VME and CompactPCI architecture; ultra-high performance signal, video and graphics processors; and PMC mezzanine modules for general purpose I/O, memory, networking and communications. With ICS and Octec now established within Radstone Embedded Computing, Radstone can also offer industry-leading solutions in data acquisition, digital signal processing, software radio, rugged, real-time video tracking and image processing systems. Central to Radstone's business approach is the company's 'Whole Program Life COTS' philosophy, designed to maximize the value of a customer's investment throughout the extended life of a program, reducing cost of ownership and minimizing the impact of component obsolescence. RAM Inc CISCO, TX 76437-0047
Contact name:
R DIANN MORRIS
Phone: 254 442-1008 URL:
raminc-cisco.com
Custom injection molder of high temperature thermoplastics; secondary operations of assembly, precision machining, sonic welding, painting, and thermoforming. Tool design and mold making done also. Quality program approved by major aerospace customers. RAM Inc. Cisco, TX 76437-2114
Contact name:
Diann Morris
Phone: 254 442-1008 URL:
www.raminc-cisco.com
Hub Zone Molder: Aerospace & Commercial. Small woman-owned business specializing in
custom injection, compression, and heat forming of engineered thermoplastics. Transforming to Lean Manufacturing and AS9100. Also do foam molding, secondary machining and subassembly. We design, and fabricate molds for both low and high volume runs. Ram, Inc. Cisco, TX 76437-0047
Contact name:
R. Diann Morris
Phone: 254 442-1008 URL:
raminc-cisco.com
RAM Inc. is a custom injection molder of high temperature thermoplastics for the aerospace and commercial industries. We are a woman owned small business in a certified HUBZONE area. We specialize in short run and production. We design and fabricate molds, precision machining, painting, assembly and sonic welding. Ranor, Inc. Westminster, MA 01473-1058
Contact name:
Jeff Lippincott
Phone: 978 874-0591 URL:
www.ranor.com
Ranor, Inc. is one of the most self-sufficient fabricating and machining company in the U.S. Situated in North Central Massachusetts, Ranorâ&#x20AC;&#x2122;s 125,000 square foot manufacturing facility is home to state-of-the-art equipment unique to our industry. Our customers represent a broad range of industries including military, government labs, aerospace and nuclear. We have inhouse, redundant capabilities for thermal cutting, shearing, sawing, forming, rolling, welding, nondestructive examination, testing (hydrostatic, pneumatic and leak testing), stress relieving, blasting, painting, machining and final assembly. Quality Assurance:ASME Section I (Code Stamp S and PP)ASME Section III, Div. 1 and 3Code stamps NA, NPT, NSASME Section VIII Division 1 (Code Stamp U)National Board Inspection (R Stamp)Military Specifications MIL-Q9858A Rapid Rivet & Fastener Corp. Farmingdale, NY 11735
Contact name:
ALFRED R. FELICE
Phone: 631 249-0400 URL:
HTTP://WWW.RAPIDRIVET.COM
Rapid Rivet & Fastener Corporation was established in 1985 to fill a growing need in the fastener jobber market. Rapid Rivet continues to be a supplier of Mil-Spec rivets and rivet-nuts and maintains a complete inventory of lot controlled, domestically manufactured products. As wholesalers, Rapid Rivet is a master stocking distributor supplying precision fasteners to Aerospace and Commercial Industries. Rapid Rivet &Fastener Corporation FARMINGDALE, NY 11735-6624
Contact name:
ALFRED R. FELICE
Phone: 631 249-0400 URL:
HTTP://WWW.RAPIDRIVET.COM
Master stocking distributors of Aerospace and Commercial Rivets,Rivet-nuts, Threaded inserts and tools for installation. Technically knowledgable in AN,MS,NAS,BACR and other OEM specification. RdF Corporation Hudson, NH 03051-3224
Contact name:
Arthur Pearson
Phone: 603 882-5195 URL:
www.rdfcorp.com
RdF is a manufacturer of temperature maesurement products including RTDs, thermocouples, heat flux sensors and heaters. We service commercial/industrial, aerospace, aircraft, military and nuclear industries. RdF is an AS9100C, ISO9001 certified company. Real-Time Innovations Inc. Sunnyvale, CA 94089
Contact name:
Catherine Meklar
Phone: 408 734-4200 URL:
www.rti.com
RTI is a leading developer of tools and middleware for the real-time software market. Our products include: NDDS - publish subscribe, real-time middleware; Constellation - the real-time UML-based software platform for control software; and, ScopeTools - analysis tools for embedded software. Rebling Plastics Warrington, PA 18976-2496
Contact name:
Nate Bower
Phone: 215 343-2400 URL:
http://www.reblingplastics.com
Designs, manufactures and sells QPL'd aircraft battery receptacles (MS3509 style), battery disconnect plugs (MS 25182-2 & MS 3349 type)and vented filler caps for Ni Cad batteries.Custom plastic injection molder of thermoplastic and thermoset mateials. Recco Products, Inc Wayland, MI 49348-1319
Contact name:
Laura Cooper
Phone: 269 792-2243 URL:
www.recco.net
designers, engineers, manufacturers of precision stainless steel filters, strainers and screens for aerospace, industrial, military, marine, and pharmaceutical/biomedical OEMs Regent Aerospace Corp.
Valencia, CA 91355
Contact name:
Larry Levey
Phone: 661 257-3000 URL:
www.regentaerospace.com
Regent specializes in the maintenance and spares support of all types of aircraft seats. Passenger, cockpit crew and flight attendant. Also provide complete seat assemblies and full maintenance and overhaul service.Regent also offers a wide range of aircraft window, lens and canopy repair services.ISO-9002, Boeing D1-9000, Gulfstream Aeorspace Quality Approvals. FAA/JAA Repair Station PA8R131J. Reimers Systems, Inc. Springfield, VA 22153
Contact name:
Stephen D. Reimers
Phone: 703 952-0240 URL:
www.ReimersSystems.com
With decades of experience, our product line includes hyperbaric chambers, animal research chambers and altitude training facilities/hypobaric chambers as well as breathing simulators. We also specialize in oxygen service solutions to fit any site or need. Our accessory line also includes manifolds, hood drivers, gas selection panels and utility penetrators.RSI services include site development and engineering; turnkey site installation; field acrylic re-window service; overhaul, relocation and maintenance of any chamber; operations and emergency procedures; safety surveys; fabrication design and shop drawing reviews; CAD design and conversion from conventional drawings, and much more. Reliance Aerotech Services Inc. NASHVILLE, TN 37217
Contact name:
Ron Jordan
Phone: 615 308-3522 URL: Provides aircraft maintenance and logistics services to include temporary technical personnel and turn-key aerospace maintenace management solutions. REM Engineering Services, PLLC Morgantown, WV 26505
Contact name:
Ryan L. Hayes
Phone: 304 598-0882 URL:
www.remengineering.com
R E M Engineering Services is comprised of professional engineers covering numerous sectors of the engineering field. Current areas of expertise consists of mechanical,chemical, electrical,aerospace and environmental engineering applications as well as numerous advanced computer developmental tools.The firm is capable of performing multiple contracts and multi-year, multi-track projects.REM is a client- based business which strives to advance its reputation of quality and dependablity to every client.REM is certified by the U.S. Small Business
Administration as a socially and economically disadvantaged business and as a certified a participant in the 8(a) Program.The members of REM are MS and PhD educated in their respective fields. RENK Coraporation, LABECO Division Mooresville, IN 46158-1625
Contact name:
ROBERT T BURNS
Phone: 317 8312990 URL:
http://www.LABECO.com
Design and manufacture test systems for the automitive, aerospace, railway equipment industries. Reyco Precision Machining, Inc. ENGLEWOOD, CO 80110-1223
Contact name:
Reyes S. Lopez
Phone: 303 781-9043 URL: Precision Machine Shop, Doing work for Aerospace industryClients include Lockheed Martin, Boeing, Ball Aerospace RIC International, Inc. Cambridge, MA 02141
Contact name:
Tom Martorelli
Phone: URL: http://www.ricintl.com/federal.html RIC International is a leading provider of translation, interpreting, web localization, and transcription services to the Federal Government. We translate material in all media between English and over 80 languages, including all the major Asian, European, Middle Eastern, and Latin American languages. We specialize in technical, medical, and legal subjects, including defense, aerospace, nuclear, security, pharmaceuticals, and electronics fields.RIC holds a GSA Federal Supply Schedule contract GS-10F-0023K (see www.ricintl.com/federal.html). RIC is a HUBZone-certified Small Business. For more information, please call 800-240-0246 x. 130 and ask to speak to our Government Sales specialists Tom Martorelli or Leslie Diamond. Richard's Machining Company San Jose, CA 95116-2734
Contact name:
Gus Chavez
Phone: 408 288-9219 URL:
www.Richardsmachininginc.com
At Richard’s Machining, we deliver the highest standards in precision machining utilizing state of the art equipment and skilled, experienced professionals. From the design and prototype stages, using conventional to production runs utilizing CNC equipment, Richard’s Machining is flexible enough to meet our customers' changing needs. Richard’s Machining is Cost Effective offering
competitive and realistic bids. From two-day turnarounds to long term runs, Richard’s Machining can handle any sized projectOur goal at Richard’s Machining is simple: to provide innovative, quality services that deliver high quality at a reasonable price and on time. We also work closely with our friendly vendors to provide more services in order to bring to our customer complete jobs. We provide both short runs and high volume orders. From tiny parts to big parts for most of industrial fields such as Medical & Dental Products; Aerospace & Defense; Electronics & Computer Hardware; Semi Conductor;Optical Equipment; Communication Equipment; Commercial Products and others… Rieker Inc. Aston, PA 19014-0410
Contact name:
Skip Gosnell
Phone: 610 500-2000 URL:
http://www.riekerinc.com
Since 1917, Rieker Inc has been a leading manufacturer of accurate, rugged, all-weather Inclinometers, boom angle indicators, custom slip indicators, and tilt warning devices. Our Inclinometers are used by multiple industries including: Aerospace/Defense, Agriculture, Aviation, Civil Engineering, Construction, Drilling, Government, Industrial, Marine, Military, Mining, and Road/Transportation. RIEtech Global, LLC Albuquerque, NM 87109
Contact name:
David McCreery
Phone: 505 299-6623 URL:
www.rietechglobal.com
RIEtech Global designs, develops and fabricates precision motion control devices for diverse applications in aerospace, medical, wireless communications, security and surveillance, and other industries. The company has a broad range of standard and custom gimbal designs, in stabilized or unstabilized configurations, for payloads such as lasers, antennas, cameras and other sensors. Many RIEtech Global products utilize our Roto-Lok® drive technology which provides very high stiffness and zero backlash. Right On Machine, Inc. Rockford, IL 61109
Contact name:
Lam Chanthalalay
Phone: 815 229-1550 URL:
www.rightonmachine.com
At Right On Machine we are committed to providing high quality machined parts, automotive, and aerospace.When you hire us, you will be very happy of knowing that you have 25 plus years of experience working for you to get the job done right the first time, by delivering execptional value products, consistent quality, and on-time delivery at the lowest cost. Rimeco Products, INC Willoughby, OH 44094
Contact name:
JOHN RIBIC
Phone: 440 918-1220 URL:
www.rimecoproducts.com
We are a manufacturer of products to print for the Aerospace and defense industries. Our capabilities include CNC Milling and Turning. We have made parts with FSC codes 1005-3040 directly and inderectly for the government. RISCO Inc. Beaumont, CA 92223-2676
Contact name:
J A FRAINEE JR
Phone: 951 769-2899 URL:
www.risco-fasteners.com
ISO 9001:2000 Registered and Qualified Supplier List (QSL) Listed Fastener Manufacturer. Screws, Rivets, Bolts, Pins, and other cold-headed detail parts. Capabilities include Heading, Thread Rolling, Drilling, Slotting, Grinding, Pressing, Broaching, and Trimming. Single and Multi Die Operations. Aerospace AS9100 compliant. Commercial and Aerospace. Riverside Manufacturing, Inc. ELK RIVER, MN 55330
Contact name:
Sheldon Mayer
Phone: 763 274-2193 URL:
riversidemnf.com
We specialize in complex machining of aerospace and defense parts. We do Short/prototype to large long running programs. Riverside Research Institute New York, NY 10038
Contact name:
LOIS E. BISHOP
Phone: 212 502-1750 URL:
www.rri-usa.org
Riverside Research Institute (RRI) is an independent, nonprofit institute performing engineering research in the public interest.The Institute's research staff is composed of highly experienced professionals who are technology and systems leaders in their fields of expertise. Among the wide range of skills of the research staff are: biomedical ultrasound, air and missile warning, space surveillance, intelligence radars, electrical engineering, ultrasound, aerospace engineering, biophysics, physics, astrodynamics, mathematics, advanced signal processing, computer science, systems engineering, management, and others. Robert Wooler Company DRESHER, PA 19025-0300
Contact name:
Craig Skinner
Phone: 215 542-7600 URL:
www.robertwooler.com
Commercial Heat Treating Company - Nadcap Accredited.Aerospace, Military, Automotive Heat Treating Processes,including, atmosphere, salt, vacuum and air. MetallurgicalLab in-house. Boeing, Pratt-Whitney, Bell and variousother aerospace approvals. Neutral Hardening in Salt, Air,Vacuum, Atmosphere and Induction Hardening and Tempering.Vacuum tempering, annealing and stress relieving.Normalizing, annealing, stress relieving in air, atmosphereor vacuum. Robert's Honing & Gundrilling Santa Fe Springs, CA 90670-4730
Contact name:
Robert Pirillo
Phone: 800 263-7862 URL:
www.robertshoning.com
Trepanning,gundrilling, off-center gundrilling, Honing Robocom Systems International Massapequa, NY 11758-4606
Contact name:
R. Todd Tufo
Phone: 516 795 URL: www.robocom.com Robocom Systems International develops, markets and supports advanced Warehouse Management Systems (WMS) that enable companies to realize vital cost savings by automating warehouse operations. Robocom was incorporated in 1982 with an initial focus of providing customized software solutions integrated to automated material handling systems for warehouse and distribution applications. In the beginning, Robocom focused on the integration of systems that utilized various types of material handling equipment including Automatic Storage and Retrieval Systems (ASRS), Automatic Guided Vehicles (AGV), Storage Carousels and automated Conveyor Systems.Through the 1980s and into the 1990s the growth of the microcomputer industry led to new trends and techniques for the entire Warehouse Management System solution. The addition of barcode technology, Radio Frequency Scanners (RF's), electronic data interchange (EDI) and lower cost computing has had dramatic effects on warehousing and distribution. Recognizing the impact of these changes, RIMS was completely rewritten using a 4GL RDBMS as a standard product for warehouse material management supporting EDI, compliance labeling, Radio Frequency (RF) Scanners and conveyor control systems. Roll Forming Corporation Shelbyville, KY 40065
Contact name:
Annette Simpson
Phone: 502 633-4437 URL:
www.voestalpine.com/rfc
Roll Forming Corporation is a leading world-class manufacturer of custom roll formed metal products supplying the aerospace, office furniture, automotive, agricultural/construction, warehousing, enclosure, solar and custom parts industries. RFC was founded in 1947 and now has four facilities on a beautiful campus setting just off I-64 in Shelbyville, Kentucky and one new facility in southern Indiana. In 2000, RFC became a subsidiary of Austria's largest steel and steel products producer, voestalpine. Rose Industries, Inc.
Palmer, MA 01069-1723
Contact name:
Robert J. Lamb
Phone: 413 283-8866 URL:
www.roseind.com
Rose Industries, Inc. is a manufacturer of high precision machined parts and assemblies serving the medical, aerospace, commercial and defense systems industries. We are especially adept at high quality, quick turn-around delivery schedules. Rosemount Aerospace Inc. BURNSVILLE, MN 55306-4898
Contact name:
Suezann K. Eckert
Phone: 952 892-4291 URL:
ROTH-WILLIAMS INDUSTRIES INC d.b.a. LUNAR INDUSTRI Clinton Township, MI 48035-3359
Contact name:
PATRICIA WILLIAMS
Phone: 586 792-0090 URL:
www.lunarind.ldmi.net
lUNAR INDUSTRIES HAS BEEN IN BUSINESS SINCE 1966. COMPANY PURCHASED BY CURRENT OWNERS IN 1987 AND IS CERTIFIED WOMEN-OWNED. THE COMPANY DESIGNS AND MANUFACTURES SPECIALTY TOOLING FOR THE AEROSPACE AND AUTOMOTIVE INDUSTRIES. GENERAL ELECTRIC AIRCRAFT ENGINES IS THE COMPANY'S LARGEST CUSTOMER. THE COMPANY HAS DESIGNED AND BUILT TOOLING FOR VARIOUS COMMERIAL AND MILITARY AIRCRAFT ENGINES, THE MX MISSILE, THE C17 TROOP CARRIER, THE SPACE STATION FREEDOM, LAUNCH ROCKETS, TORPEDOES, NAVAL AVIATION SUPPORT EQUIPMENT AND SAFETY RELATED AUTO PARTS. THE COMPANY IS A PARTICIPANT IN THE U.S. NAVY'S MANUFACTURING TECHNICAL ASSISTANCE PRODUCTION PROGRAM(MTAPP). THE COMPANY IS ALSO A MEMBER OF A 12 COMPANY TOOLING COLLABORATIVE WHICH HAS JOINED TOGETHER UNDER A COLLABORATIVE AGREEMENT TO INCREASE COMPETITIVENESS AND COMBINE RESOURCES AND TECHNOLOGIES TO BETTER SERVE OUR CUSTOMERS. RTI International Metals, Inc. Niles, OH 44446
Contact name:
Richard E. Leone
Phone: 330 544-7622 URL:
www.rtiintl.com
RTI International Metals is one of the world’s largest producers of titanium. Through its various subsidiaries, RTI manufactures and distributes titanium and specialty metal mill products, extruded shapes, formed parts and engineered systems for aerospace, industrial, defense, energy, chemical, and consumer applications for customers around the world. The Company has two business groups: the Titanium Group and the Fabrication & Distribution Group, made up of
1,200 people at 19 locations in the United States, Canada, Europe, and Asia.RTIâ&#x20AC;&#x2122;s strategy is to become the Supplier of Choice throughout the world, while maintaining its strong financial condition and stringent quality, safety, and environmental standards. The Company intends to continue its diversification into higher margin value-added products in both new and traditional markets. This diversification has led to the development of new markets and products, such as extruded shapes and seamless tubulars for energy production, as well as the engineering and fabrication of titanium and nontitanium transfer systems for deep-sea energy applications. Ruhle CO Inc VALHALLA, NY 10595-1452
Contact name:
FRANK S RUHLE
Phone: 914 761-2600 URL:
www.ruhle.com
Precision Inductosyn(r) Position Transducers for industrial automation, aerospace and military applications. Inductosyn(r)transducers combine high accuracy, extreme reliability and ruggedness to meet harsh & demanding requirements. RUPP FORGE CO Cleveland, OH 44125-0290
Contact name:
RICHARD ZAK
Phone: 216 429-0400 URL:
www.ruppforge.com
Since 1914, Rupp Forge has consistently developed new processes and techniques in closed-die and hammer forgings. We produce quality forgings for the following markets: Aerospace Automotive Farming Food Mining Ordnance Petrochemial Fittings and valve Rupp Forge is capable of forging the following material with finished weights from 3 oz. through 16 Lbs.: Stainless Steel Carbon Alloy Aluminum Specialty Steel Our team is capable of meeting tough customer and government specifications. S&R Screw Machine Products Inc. North Hollywood, CA 91601-5503
Contact name:
Mr Sanford Ruback
Phone: 818 504 - 6388 URL:
None
We manufacture Military, Aerospace, Electronic,Medical& commercial parts for all industries, from short runs of5 Pcs. to into the thousands. We hold very close tolerances +.0000 -.0002 on all our equipment.We are also an Iinsulated terminal manufacturer cross referencing many other companies. S.M.A.R.T., INC Edgewater, FL 32132-0456
Contact name:
Louis Higuera
Phone: 386 426-0611 URL:
www.smart-inc.com
We are an aerospace contract labor firm supplying all disciplines to support your Corporate, Rotor-wing, Commercial, Military, and General Aviation workforce, wordwide as required since 1988. Saalex Solutions, Inc. Westlake Village, CA 91361
Contact name:
Travis Mack
Phone: 805 496-9811 URL:
www.saalexsolutions.com
Saalex Solutions, Inc. (SSI) offers systems and design engineering and information technology services for space, missile, and information systems. We offer services with subject matter or domain-specific capability to Government and aerospace companies. SABRIN CORPORATION Pasadena, CA 91107
Contact name:
dba ASTRONIC COMPANY
JOSEF A. WRABLICZ
Phone: 626 792-3813 URL: Founded in 1961, Sabrin Corporation, also known as Astronic Company, specializes in complex machining of Aerospace, Automotive Assemblies and Components, High-Temperature material forming, Metal Spinning, and Precision Machining through mediums of aluminum to hard exotic metals. The manufacturing facility utilizes CNC 3,4 and 5 axis machines including gantry machines. Safety Management Services, Inc. West Jordan, UT 84088
Contact name:
Robert T. Ford
Phone: 801 567-0456 URL:
www.sms-ink.com
Safety Management Services, Inc. (SMS) provides a variety of risk management and testing services to a variety of commercial clients and government agencies. Our broad base of experience with the chemical, aerospace, and other industries enable us to offer a comprehensive range of safety and risk management services. The mission of SMS is to safeguard people, processes, and the environment by assisting our clients in maintaining the safety of their operations. Our mission is accomplished through systematic identification of safety-related deficiencies, and the development of risk-minimizing solutions that are costeffective and based on sound engineering principles. Sage Cheshire, Inc. Lancaster, CA 93535-5205
Contact name:
ALICE THOMPSON
Phone: 661 940-9320 URL:
www.sagecheshire.com
Composite, Fabrication, Moldmaking, Aerospace Sagebrush Technology, Inc. Albuquerque, NM 87109-5839
Contact name:
Joseph F. Zmuda
Phone: 505 299-6623 URL:
www.sagebrushtech.com
Sagebrush Technology designs, develops and fabricates precision motion control devices for diverse applications in aerospace, medical, wireless communications, security and surveillance, and other industries. The company has a broad range of standard gimbal designs that produce ‘pan and tilt’ pointing, or stabilized control, for payloads such as lasers, antennas, cameras and other sensors. In addition to selling standard models, Sagebrush engineers customized and custom-designed products. Staffed with mechanical and electronics engineers, the products utilize patented Roto-Lok® drive technology which provides very high stiffness and zero backlash to the gimbal platforms. Sagem Avionics, Inc. Grand Prairie, TX 75052
Contact name:
Thierry Sieg
Phone: 972 314-3600 URL:
www.sagemavionics.com
Sagem Avionics, Inc. a company incorporated in the US with headquarters in Dallas, Texas is a wholly owned subsidiary of Sagem, a Safran group company. Sagem Avionics, Inc. provides high quality avionics products and services to Part 23, 25, 27, and 29 aircraft and helicopters. These include technical support, MRO services, and marketing and sales of integrated cockpit display systems, helicopter autopilot systems, flight control components, aircraft condition and monitoring systems, and flight operations quality assurance software. Saint Louis Designs, Inc Austin, TX 78764-3400
Contact name:
Carole Tower
Phone: 512 472-4711 URL:
www.saintlouisdesigns.com
Design, manufacture and supply precision machined assemblies.Comprehensive alloy research has resulted in a patented line of high-load, push-push latches and custom mechanisms suitable for aerospace and marine interiors. Saint-Gobain Ceramics & Plastics, Inc. Northborough, MA 01532-1545
Contact name:
Robert H. Licht
Phone: 508 351-7815 URL:
www.saint-gobain.com/en
Saint-Gobain Performance Plastics Ravenna, OH 44266-2153
Contact name:
Douglas A. Coffey
Phone: 330 297-3040 URL:
www.radome.com
Saint-Gobain Performance Plastics with facilities in Ravenna, Ohio and Puyallup, WA designs, manufactures and repairs radomes, air handling ducts, Dryliner and other polymer composite and thermoplastic parts for aircraft and other applications. We specilize in radomes for weather radar, DBS/SATCOM antennas, search and rescue radar and synthetic apperature radar. Samuel Aerospace Metals Lancaster, NY 14086
Contact name:
Peter M Baines
Phone: 1-905 279-5460 URL: www.samuel.com Samuel Aerospace Metals is a division of Samuel, Son & Co., Inc. with corporate headquarters in Mississauga,Ontario,Canada Samuel has 40 branches in North America. We carry a complete range of Carbon, Aluminum and Stainless products, specifically aerospace and defense products, and feature a full range of processing capabilities. Samuel has been privately held since its founding in 1855. SANDVIK SPECIAL METALS CORPORATION Kennewick, WA 99337
Contact name:
LINDA BROCKMAN
Phone: 509 586-4131 URL: Manufactures titanium seamless tubing for the aerospace, medical, recreational and chemical processing industries. Sizes range from 0.250"" OD to 1.500"" OD. SSM also manufactures zirconium seamless tubing for the nuclear industry. Sandy Valley Fasteners, LLC Paintsville, KY 41240
Contact name:
Christy L. Henry
Phone: URL: We are a full line fastener distributor specializing in military and aerospace products.We offer bolts, screws, anchors, drill bits, saw blades, safety products, fittings, etc. Sanna Mattson MacLeod, Inc. Smithtown, NY 11787
Contact name:
Robert Mattson
Phone: 631 265-5160 URL:
www.smmadagency.com
Sanna Mattson MacLeod, Inc., (SMM) is a full-service marketing and advertising agency specializing in business-to-business, high technology, aerospace, healthcare, and government services advertising. SMM has been a member of the American Association of Advertising Agencies for over 18 years, and was recently ranked among America's top 50 agencies by Crain's B-to-B magazine for the fifth consecutive year. Scapa Windsor, CT 06095
Contact name:
Tom Garcia
Phone: 860 688-8000 URL:
www.scapa.com
Scapa is a specialty manufacturer of pressure sensitive adhesive tapes. Our vast line of products include adhesive coated polyesters, polyethylene's, PVC's, kaptons, foils, cloths, foams, and unsupported products. To view our data sheets on the web, visit www.scapa.com. Schmidt Progressive, LLC Lebanon, OH 45036
Contact name:
Stephen Moore
Phone: 800 272-3706 URL:
www.schmidtprogressive.com
Manufacturer's of high quality fiberglass products/components since 1963. We use hand lay-up, spray-up and 'Light' RTM molding processes. We are a certified Women Owned Business (WEBNC) and are active in the supermarket, food service and OEM industries. Schott Glass Technologies Duryea, PA 18642
Contact name:
Allan Kreutzer
Phone: 570 457-7485 URL:
http://www.us.schott.com/sgt
Manufacturer of glass and glass ceramics for precision optics, filter applications, lasers, fiber optics, astronomy, aerospace, electronics, and other technical and scientific uses. Schott Glass offers precision machining and bonding of optical materials and performs glass-related contract R&D and custom glass melting services. Certified to ISO 9001. Schweizer Aircraft Corp.. Horseheads, NY 14845-9017
Contact name:
Mary Johnson
Phone: 607 739-3821 URL:
Scientific Instrumentation Ltd
sacusa.com
SASKATOON, Sa S7L 6A7
Contact name:
Dale Sommerfeldt
Phone: 306 244-0881 URL:
www.sil.sk.ca
SIL provides research and development and engineering services to a diversity of clients in the Space Science, Environmental, Industrial and Defence sectors. The company can provide full support services from system concept and feasibility studies through development and manufacturing to field installation, or any part of the process as required by the client.SIL has developed a core competency in sensor processing technology, intelligent systems and hardware and software development. Recent research in the application of neural network and LWR techniques to multigas analysis and learned trafficability vehicle control keeps the company on the leading edge of technology development. SIL has been active in the aerospace industry for over 20 years providing instrumentation related services to support the design, manufacture and launch of satellite, rocket and balloon-born instrumentation to study the earthâ&#x20AC;&#x2122;s atmosphere. ___________________ Scientific Instruments, Inc. West Palm Beach, FL 33407-3294
Contact name:
Austin C. Capers
Phone: 561 881-8500 URL:
www.scientificinstruments.com
Scientific Instruments, Inc. is a cryogenic technology solutions company delivering technical expertise and support to government, commercial, university and research customers.SI is involved in the design and manufacture of cryogenic temperature sensors for laboratory, industrial and medical applications. Other product areas include temperature indicators and controllers, petrochemical tank gauging systems for liquid natural gas (LNG) Storage tanks, LNG composition analyzer systems and aircraft temperature probes which are used on all Boeing and Airbus. Scientific Services, Inc. Cary, NC 27519-8295
Contact name:
Tom Froass
Phone: 919 618-9926 URL:
www.dfetesting.com
Scientific Services has been in operation since 1979 providing consulting services that include basic research, product development and testing to the medical devices, aerospace, and industrial fluid power industries. The primary mission of the company is research and development relating to filtration and contamination control in aircraft and mobile and stationary fluid power systems. SSI owns and operates a Controlled Contamination Test System (CCTS). The CCTS together with other laboratory facilities provides testing services to the Department of Defense (DOD) and commercial industries.The company has developed and builds automated test systems for testing filters and other fluid power components.As a result of this research, development and testing activities, SSI is in the forefront of advancing the state of the art and in developing leading edge technologies. These activities often lead to new products. Scotia Technology Div. Lakes Region Tubular Prods.
Laconia, NH 03247-1190
Contact name:
Katt Stewart
Phone: 603 5282838 URL:
www.scotia-tech.com
SMALL BUSINESS MANUFACTURES RIGID TUBE ASSEMBLIES UP TO 2"" O.D. BEND, BRAZE, FLARE, SWAGE, WELD. STAINLESS, TITANIUM, ALUMINUM, COPPER. AEROSPACE, COMMERCIAL, MILITARY, AIRCRAFT, MISSILES, ROCKETS, SATELLITES, ENGINES, LANDING GEAR, FUEL, OXYGEN, AIRFRAMES, HYDRAULICS. OVERHAUL AND REPAIR. SEA Wire and Cable. Inc Madison, AL 35758
Contact name:
Jerry Sandlin
Phone: 256 772-9616 URL:
www.sea-wire.com
SEA is aerospace/mil-spec wire and cable distributor serving over 8,000 customers world wide with offices in Madison, AL., Ft Worth, TX., United Kingdom and Australia. We do cabling, kitting, striping, twisting and printing of wire and cable as well as cut/marked tubing. We specialize in hard-to-find items. SEA-TEK PRECISION MACHINED PRODUCTS MORGAN HILL, CA 95037-5113
Contact name:
BRIAN BRADSHAW
Phone: 408 778-4442 URL:
WWW.SEA-TEK.COM
Sea-Tek Precision Machined Products manufactures critical components for medical, aerospace, high tech, military, aviation and specialized industries. We are capable of performing high precision large scale production manufacturing as well as short run and prototype items using stainless steel, aluminum, copper, plastic, brass, etc... We have exceptional quality control and inspection services to assure we maintain the highest standard of workmanship. Select Controls, Inc. Bohemia, NY 11716-3119
Contact name:
R. Ufer
Phone: 631 567-9010 URL:
www.select-controls.com
Manufacturer of of disturbance, acceleration, impact and tilt switches. For military, aerospace,industrial and automotive applications. Select Fabricators Inc. Canandaigua, NY 14424-0119
Contact name:
Gary Winch
Phone: 585 393-0650 URL:
www.select-fabricators.com
Select Fabricators, Inc. uses its extensive knowledge and experience to provide protection where it is needed. Select Fabricators specializes in custom bags, covers and tarps,and EMI/RFI shielded tents, curtains and pouches for the military, aerospace and medical industries. With factory, warehouse and on-site clean room in Upstate New York, Select Fabricators, Inc. is a leading fabrication house providing customers with high quality products and contract services. Semiconductor Process Equipment Corp. VALENCIA, CA 91355-3416
Contact name:
K MCGILLIVRAY
Phone: 661 257-0934 URL:
www.team-spec.com
Design and manufacture custom wet process equipment for the semiconductor, disk drive, biomedical, and aerospace industries. Offers a variety of automated and manual system solutions. Semiconductor Process Equipment Corp. ( SPEC) VALENCIA, CA 91355-3416
Contact name:
K MCGILLIVRAY
Phone: 661 257-0934 URL:
WWW.TEAM-SPEC.COM
Designs and manufactures custom wet process equipment for the semiconductor, disk drive, biomedical, and aerospace industries. Offers a variety of automated and manual system solutions. Semiray Inspection Services, Inc. GLENDALE, AZ 85301
Contact name:
FRANK ENCINAS
Phone: 623 842-3030 URL: NDT and Special Process Cleaning Laboratory Semper Fi Inc. Rancho Cordova, CA 95742
Contact name:
Fernando
Phone: 916 852-8511 URL:
www.semperfimfg.com
Supplier of cost effective metal products and services for the Aerospace, Military, and Government Industries.
Senga Engineering, Inc. Santa Ana, CA 92705-5419
Contact name:
Mike Irion
Phone: 714 549-8011 URL:
www.senga-eng.com
PRECISION CNC MACHINING. HORIZONTAL MILLING, VERTICAL MILLING, MULTI-AXIS TURNING, 5-AXIS MILLING. SENGA PROVIDES PERCISION MACHINED COMPONENTS TO THE AEROSPACE, MEDICAL, INTERCONNECT, MILITARY, INDUSTRIAL, ETC. MARKET SEGMENTS. WE SEEK COMPANIES WITH UNCOMPROMISING EXPECTATIONS FOR QUALITY TO PARTNER WITH AND SUPPLY MACHINED COMPONENTS. Senior Aerospace Composites Wichita, KS 67217
Contact name:
Roy Best
Phone: 316 942-3208 URL:
http://www.seniorcomposites.com
Mfg. composite parts and assemblies for commercial., gen. aviation, military & helicopter markets. Primary applications are composite structures, ECS ducting, and aircraft interiors. Sensing Devices, Inc. Lancaster, PA 17601-5957
Contact name:
Christopher J. Albert
Phone: 717 295-2359 URL:
http://www.sensingdevices.com
Mfg. of platinum resistance thermometers & asseblies. Specializing in standard & custom designs for applications ranging from aircraft, aerospace, and industrial environments. Temperature ranges from -200 to 670 degrees Celsius. NIST, Tier 1, traceable calibration services available. Sentech, Inc. Glenside, PA 19038
Contact name:
DIPAK PATEL
Phone: 215 887-8665 URL:
www.sentechlvdt.com
Designer and manufacturer of Linear and Rotary Position transducers/sensors for Defense, aerospace and industrial markets.LVDT, RVDT and Motional pickup are our main products. SEPAC INC Elmira, NY 14901-1248
Contact name:
Dave Vieira
Phone: 607 732-2030 URL:
http://www.sepac.com
SEPAC is an electromagnetic clutch and brake designer and manufacturer. We design specials for the military and aerospace industries, as well as standard designs, more commonly used in industrial applications. We are fully staffed with expert design engineers and modern CNC machinery for prototypes and production quantities. Sepac, Inc. Elmira, NY 14903-1822
Contact name:
Dave Vieira
Phone: 607 732-2030 URL:
www.sepac.com
SEPAC is a private, small business that is primarily engaged in the design, manufacture, asembly and testing of mostly electromagnetic clutches and brakes. We serve virtually all markets that need to control motion, with a strong presence in military and aerospace. SEQUENTIAL ELECTRONIC SYSTEMS Elmsford, NY 10523-1959
Contact name:
MERCEDES DOMINGUEZ
Phone: 914 592-5930 URL: SEQUENTIAL ELECTRONIC SYSTEMS, INC., HAS BEEN DESIGNING AND MANUFACTURING OPTICAL ENCODERS FOR THE INDUSTRIAL,MILITARY AND AEROSPACE MARKETS FOR OVER 30 YEARS. OUR FULL LINE OF PRODUCTS CONNSISTS OF THE FOLLOWING:1) INDUSTRIAL INCREMENTAL AND ABSOLUTE ENCODERS.2) HIGH RESOLUTION MILITARY ENCODERS.3) SPECIAL PURPOSE ENCODERS FOR THE MILITARY AND SPACE.4) ENCODED TORQUE MOTORS,FILM DRIVE SYSTEMS5) SOLID STATE LIMIT SWITCHES.6) SPECIAL PURPOSE CONTROL SYSTEMS. Serbin Machining Inc. Albuquerque, NM 87113
Contact name:
Michael Saavedra
Phone: 505 823-2211 URL:
N/A
Serbin Machining Inc. is an ISO 9001-2000 , AS9100 certified manufacturing company specializing in the aerospace industry. Serbin will accept large to small production runs. Serendipity Electronics Inc. Northport, NY 11768-1787
Contact name:
Janice Harrington
Phone: 401 315-0631 URL:
www.serendipityelectronics.com
SERRA MANUFACTURING CORP East Rancho Dominguez, CA 90221-5575
Contact name:
D.F. Pellegrino
Phone: 310 5374560 URL:
www.serramfg.com
Mfg of small precision stampings for the aerospace and medical devices industry. ISO 9100 certified. SERVOTRONICS INC Elma, NY 14059-0300
Contact name:
A NDREW L .JAKUBOWSKI
Phone: 716 655-5990 URL:
WWW.SERVOTRONICS.COM
MANUFACTURES TORQUE MOTORS, SERVOVALVES. PNEUMATIC VALVES, ACTUATURS AND SPECIALITY METAL SEALS FOR THE AEROSPACE AND MEDICAL FIELDS. Sesco Industries, Inc. College Point, NY 11356
Contact name:
Steven Shulman
Phone: 718 939-1900 URL:
www.sescoindustries.com
WE ARE A MANUFACTURER OF AEROSPACE HARDWARE, SPECIFICALLY HEX SOCKET SET SCREWS AND SLOTTED HEADLESS SET SCREWS TOMS-AN-NAS-NASM MILITARY STANDARDS. WE ARE ALSO CAPABLE OF MANUFACTURING CUSTOM SCREW MACHINE PARTS TO BLUEPRINT. WE ARE REGISTERED WITH GRS FOR ISO 9002. WE ARE ALSO LISTED ON THE DEPARTMENT OF DEFENSE QUALIFIED SUPPLIER LIST FOR CLASS 3 THREADED FASTENERS Setco Sales Company Cincinnati, OH 45233
Contact name:
Gary Renner
Phone: 513 467-7235 URL:
www.setcousa.com
SETCO is the largest independent manufacturer of precision spindles and slides in North America and is the home of Pope, Master and Whitnon brands. SETCO offers a variety of industrial products and services used in automotive, aerospace, construction, die/mold, cabling and winding, plastics, woodworking and general metalworking industries.<BR><BR>SETCO products include standard and custom designs and include: Precision belt driven, CNC, motorized, and geared spindles; Precision spindle/slide assemblies, production dovetail, hardened way, linear bearing slides, tooling and utility slides; Multi-axis spindle/slide machine modules.<BR><BR>SETCO offers complete Spindle and Slide Repair, Rebuild and Retrofit Services and operates four service centers in the U.S.A. (Michigan, Ohio, Georgia, and California.)<BR><BR>SETCO will repair ALL makes and models of precision spindles, standard
and custom designs, domestic, OEM and foreign brands, and offer the best the best service & warranty in the industry. Share Machine, Inc. Aurora, IL 60506
Contact name:
ZEKIR SHARE
Phone: 630 906-1810 URL:
www.sharemachine.com
Share Machine, Inc. is a small company that is family owned and operated. Share Machine will precision machine your parts per print or reverse engineer parts per sample. Do to veriety of CNC machines and manual equipment we can do breackdown work, small runs, or production quantities. Sheffield Manufacturing Inc. Sun Valley, CA 91352
Contact name:
DENNIS CANEVARI
Phone: 818 767-4948 URL:
www.sheffield-mfg.com
FAA Repair Station Certificate (XTR2405L)Since 1951 Sheffield Manufacturing has provided precision machining, sheet metal and welding services to the aerospace industry. A dedicated and skilled staff produces and delivers high-quality parts for commercial aircraft including the 737, 747, 757, 767 and 777. Military aircrafts include the C-130, F-4, F-5, F-18, F-16 and P-3.Using CNC equipment and concurrent engineering support, Sheffield responds quickly to requirements for build-to-print parts and complete assemblies from its 20,000-square-foot facility. Job control and on-time deliveries are maintained through the use of an integrated computerized production control system, JobBoss. CAD/CAM computer systems include AutoCAD 2000 with Mechanical Desktop, Mastercam, Profold, IGES and DXF data interchange formats. Sherwin, Inc. South Gate, CA 90280
Contact name:
Arnold G Marquez
Phone: 562 861-6324 URL:
www.sherwininc.com
Sherwin Inc. has manufactured its Dubl-Chek line of liquid dye inspection penetrants and related products since 1964. Dubl-Chek products are approved by governing agencies worldwide, including the US Government, Air Force, ASME, ASTM, as well as the prime aerospace and military contractors and OEM's. Dubl-Chek Fluorescent penetrants are used widely in aerospace, while Dubl-Chek visible penetrants are used throughout welding and nuclear power industries. Related products are emulsifiers, removers and developers. Showers Group Inc. (was Turned products) Bloomington, IN 47404
Contact name:
Harry Harrington
Phone: 812 334-1191 URL:
www.showersgroup.com
Job shops specializing in machining of all types of metals and plastics for automotive,aerospace,medical, and electronics industries. shur-lok corporation Irvine, CA 92614
Contact name:
Hilary Hurt
Phone: 949 474-6000 URL:
www.shur-lok.com
Aerospace fastener manufacturer of Locknuts, barrel nuts, Ring Locked and Key Ring Inserts and Studs, Expandable Diameter Fastener, Isolator Mounts, Ring Locked Fluid Boss Adapters and sandwich structure fasteners. SI Manufacturing, Inc. Anaheim, CA 92805
Contact name:
JAMES R. REED
Phone: 714 956-7110 URL:
www.simfg.com
SI Manufacturing offers a technical capability over a wide range of industrial, aerospace and military products. This capability includes design, development, environmental testing of power supplies, magnetic components such as transformers, coils, special magnetic harness assemblies and contract manufacturing services specializing in through hole P.C.B. assembly and box builds. Sido Ltd Granby, Qu J2J 1H8
Contact name:
Luc Benoit
Phone: 450 378-2222 URL:
www.sido.ca
SIDO ltd is specialized in precision machining of components & sub-assemblies. SIDO ltd has been involved in the aerospace & defense industry for over 50 years machining engine, landing gear, flight control, frame & avionics components. SIDO also manufactures components for communication, automobile, energy & medical industries. Sierra Electronic Assembly Ahwahnee, CA 93601
Contact name:
Jenene Jones
Phone: 559 683-2234 URL:
www.willbuild4u.com
Electronic Contract Manufacturer for the aerospace and commercial electronic industries. Sierra Hotel Aero, Inc.
SOUTH SAINT PAUL, MN 55075-3560
Contact name:
WESLEY D. SANDA
Phone: 651 306-1456 URL:
www.sierrahotelaero.com
Manufacturing, Modifications, repairs, structure, overhaul, Navion, Aircraft, Sheetmetal, Disabled, Veteran, Small, Business, Aerospace, Vehicles, parts, components, assemblies, Sierra Pacific Supply Company, Inc. COMPTON, CA 90222-1026
Contact name:
Todd Buck
Phone: 310 638-9318 URL:
sierrapacificsupply.com
Sierra Pacific Supply is a privately held, woman-owned corporation that has been a leader in supplying aerospace, military and commercial precision fasteners since 1954. Sierra Pacific’s product line consists of solid and blind rivets, AN–MS–NAS–NASM series, as well as over-sized repair and semi-tubular rivets. We are approved for the Boeing BACR15 solid rivets and other OEM series rivets. Additionally, our experienced personnel welcome other inquiries for AN–MS– NAS–NASM series bolts, screws and washers. Simgraph inc. Laval, Qu H7V 4B4
Contact name:
Richard Pappas
Phone: 450 682-1003 URL:
www.simgraph.com
Simgraph is an innovative company that specializes in the creation of customized interactive training solutions such as self-paced computer-based training, Web-based training, e-learning, simulations, and instructor-led classroom solutions.These solutions are designed to improve both the training and learning processes associated with complex technical systems. The company also creates simulation-based training aids and integrates them within new or existing training solutions. At Simgraph, we help instructors perform better and people learn faster. Simi Components, Inc. Simi Valley, CA 93065-6519
Contact name:
Katherine Hillman
Phone: URL: http://www.simicomponents.com Distributor of Electronic Components Simonds, Inc. Southbridge, MA 01550-2616
Contact name:
Richard Wheway
Phone: 508 764-3235 URL:
www.simonds-inc.com
U.S. manufacturer of pneumatic hand tools. These tools cut, crimp, degate. Used in the electronics, aerospace, automotive, general industrial and injection molding production lines. These tools help to reduce injuries,increase production and limit rejects. Simonds tools replace hand cutters, crimpers and degaters. Simonds also manufactures tools to specfic needs. Sivyer Steel Corporation Bettendorf, IA 52722-6403
Contact name:
Michael Kasten
Phone: 563 355-1811 URL:
www.sivyersteel.com
Sivyer Steel Corporation is a Small Business Qualified Foundry / Manufacturer of High Quality Custom Steel castings. We are ISO 9001:2008 certified serving the construction, mining, railroad (M-201/211/215/1003 certified), transportation, military (MIL-A-11356F, MIL-PRF-32269 certified), power generation, steel, aerospace, agriculture, metal scrap recycling industries. Specializing in carbon, low alloy, armor, austenitic manganese and stainless steel castings to finished weights of 22,000 lbs, including weld fabrication to casting upgrades. Computer aided engineering, MAGMAsoft simulation, laser scanning, full NDT and heat treatment. Sky Mart Sales Corp. Doral, FL 33172
Contact name:
JUAN ROBBIN
Phone: 305 592-0263 URL:
www.skymartsales.com
Providing Premium Quality Aerospace Fluids, Certified Aircraft Parts for Airbus, Boeing, ATR, and Fokker, and Industrial Specialty Fluids Sky Mfg. Commerce, CA 90040
Contact name:
Jack Wilson
Phone: 323 8690150 URL:
www.skymfg.net
we are a bolt manufacturer ot high strength close tolerance fasteners for the aerspace and commercial airplane manufacrurer. smardan supply company Gardena, CA 90249-2670
Contact name:
JIM BOATRIGHT
Phone: 310 532-5260 URL:
SMARDANGAR@SMARDAN.COM
75 Year old Company providing Commercial, Industrial and some Residential Plumbing Supplies, marketing to all types Contractors, Municipal Water & Power, Gas, etc, Schools and Aerospace
entities.Delivery is made by our own vehicles, truck, etc.We Accept all Major Credit Cards, Cheques, Checks, LOC's SMITHS AEROSPACE Ltd. Berwyn, PA 19312
Contact name:
Farhad Daghigh
Phone: URL: www.smiths-aerospace.com Leaders in System Integration and manufacturing of Primary and standby flight instruments (ISIS) and AMLCD Cockpit Displays (IDU). Provider of Distributed Data Acquisition Systems and Remote Interface Units (RIU). SMITHS AEROSPACE,INC.- Customer Services Americas Clearwater, FL 33762
Contact name:
Carl Eckert
Phone: 727 532-6495 URL:
smiths-aerospace.com
Aerospace Aftermarket Support Smoky Mountain Machining, Inc. Asheville, NC 28816
Contact name:
Paul McKinney
Phone: 828 665-1193 URL:
www.smokymountainmachining.com
Smoky Mountain Machining, Inc. is a precision machine shop nestled in the heart of the Great Smoky Mountains in Asheville, NC. Smoky Mountain Machining began in the l970s as a design engineering and manufacturing facility, serving major aerospace and military subcontractors. Our company quickly grew and we now currently produce a large and diverse assortment of machined parts, assemblies and sub-assemblies, for several world class companies, spanning a wide variety of diverse industries. Our highly trained and qualified personnel enable us to meet the constant changes and stringent demands imposed by today's industries. Whether you require precision tool making or high production CNC machining, we have the capability to take your parts from design, through R & D and into production. Here at Smoky Mountain Machining we are flexible machining specialists. Give us your ""Just in Time"" requirements, and we will deliver. We take pride in supplying our customers with products of the highest quality and maintain an exceptional on time delivery rating. We are QS-9000 Registerd and perform stringent preproduction, in process and final inspection processes, with emphasis on Zero Defects. We at Smoky Mountain Machining welcome the opportunity to furnish you with a prompt and efficient quotation on any of your production requirements. Software Engineering Professionals, Inc. Carmel, IN 46032
Contact name:
J S Gilbert
Phone: 317 843-1640 URL:
www.sep.com
Developer of technical software systems for monitoring, control and analysis including simulators, control systems, monitoring systems, etc. Commercial developer and Military subcontractor experienced with a variety of technical program areas including defense, automotive, medical, test/measurement, consumer products and aerospace. SoHaR Incorporated Culver City, CA 90230
Contact name:
Yariv Blumkine
Phone: 310 338-0990 URL:
www.sohar.com
SoHaR specializes in the analysis of highly reliable electronic and computer-based systems in critical applications. Areas of expertise include the reliability of Software/Hardware systems; Fault Tolerance; Prognostics and Condition Monitoring in electronic systems.SoHaR s name is derived from a contraction of Software and Hardware Reliability. We provide program support, consulting, training, and R&D services. Since our establishment in 1978, we have performed hundreds of major projects, primarily for prime Aerospace contractors and for the Federal Government. SoHaR has staff in the Los Angeles, Washington, DC and Huston Texas areas.SoHaR develops and markets both COTS and custom tools for RMA, safety and logistics analysis. Our COTS tools include: Ø RAM Commander - comprehensive RMA analysis and prediction tool (includes FMEA and FTA modules); Ø MEADEP - Markov based dependability analysis tool; Ø FavoWeb - web-based dynamic FRACAS application; Ø IVAT - Infrastructure interdependability Vulnerability Analysis Tool; Ø SCAT Automated Sneak Circuit Analysis ToolØ Cost Commander and DLCC LifeCycle cost analysis tools. Sol 3, LLC DARIEN, IL 60561-4618
Contact name:
Mr. William Cavico
Phone: 630 435-4899 URL: Sol 3, LLC is devoted to aerospace research and developmentflowing from research and development focused on unconventional radiation and energy fields. Solid Modeling Systems Inc. Milford, CT 06460
Contact name:
STEPHEN BUCHKO
Phone: 203 877-4488 URL: We are a full service CATIA (CAD/CAM/CAE) training & design services company. We provide CATIA V4 & V5 training, engineering design, and consulting services. We also provide CAD data translations, Digital Mock-Up (DMU) modeling and drafting services. We specialize in Aerospace, Shipbuilding, and Automotive design services. Sonic Machine & Tool Inc. Tempe, AZ 85283-3657
Contact name:
Mr. Mark Willmering
Phone: 480 777-1787 URL:
www.sonicmachine.com
Sonoma Photonics, Inc. Santa Rosa,, CA 95407-7396
Contact name:
James J. Brosnan
Phone: 707 568-1202 URL:
www.sonomaphotonics.com
Sonoma Photonics Inc is a precision thin film coating and optics supplier utilizing its Automated Proprietary Sputtering processes to offer state of the art filters to the Aerospace, Life Sciences, and Laser markets. Our experienced manufacturing and engineering staff allow us to support customer requests to provide the most advanced solutions with the highest performance in the industry. The Sonoma Photonics staff and facility are organized to support multiple manufacturing demands from small batch, R & D requirements to full scale production maintaining the highest quality levels. Our new facility is currently approved per Quality Standard MIL - I - 45208 and Calibration Standard MIL - STD - 45662. We look forward to working with you. Sorensen San Diego, CA 92121
Contact name:
Brandon Ratliff
Phone: 858 458-0281 URL:
www.elgar.com
Elgar Electronics produces Programmable AC Power Supplies and Programmable DC Power Supplies. Elgar Electronics is a world leader in programmable power supplies and related power products sold under the Elgar, Sorensen, and Power Ten brands. The companyâ&#x20AC;&#x2122;s technology plays a key role in industries such as automotive, aerospace, medical, telecom, semiconductor, defense, and OEM applications. Elgarâ&#x20AC;&#x2122;s comprehensive product range includes AC power sources, programmable DC power systems and loads, solar array simulators, and integrated rack power subsystem services. Elgar Electronics is located in San Diego, California. South Bend Controls South Bend, IN 46615
Contact name:
Jon Gilchrist
Phone: 574 234-3157 URL:
www.sbcontrols.com
Manufacture and Design of Specialty and Custom Fluid Controls - Solenoid Valves, Proportional Valves for Flow Control of Liquids and Gases, High Pressure Regulators, Quick Disconnects, Squib Valves, Fill and Drain Valves. ** TOLL FREE PHONE (800) 207-4722 ** Southeast Aerospace Melbourne, FL 32935
Contact name:
Raymond Rautenstrauch
Phone: 321 255-9877 URL:
www.seaerospace.com
Avionics sales and service company with extensive Internet catalog. Worldwide avionics sales for general aviation, corporate, and regional airline aircraft. FAA/JAA approved repair station with extensive capabilities. Large installation and modification facility. SOUTHEASTERN TRANSFER & STORAGE CO INC Smyrna, GA 30080
Contact name:
Debra Wallace
Phone: 404 794-2401 URL:
www.setransfer.com
Southeastern Transfer is a heavy-haul trucking and storage business specializing in the safety and on-time delivery of our customers oversized and/or overweight goods and equipment. Started in 1929 by Grady Russell Wallace, Southeastern Transfer is now in its 79th year of continuous family ownership and operation. A female-owned company, we are certified through the GWBC and the City of Atlanta. Southwest manufacturing corporation DALLAS, TX 75207
Contact name:
HUMBERTO CHAVEZ
Phone: 214 638-0323 URL: This company was established in 2002 by Humberto Chavez,Arturo Chavez,Hector Chavez,and Pedro Lira with a combined experience of over 75 years in the machine shop industry and over 30 years in the aerospace machine shop industry. We currently have (3) brand new cnc machining centers (1) 30x16x20 (1)40x20x22 and (1)50x25x24 and (2) year old cnc lathe as well as manual equipment to support our cnc deparment,we specialized in standard and surfacing machining. Southwest Research Institute San Antonio, TX 78238-5100
Contact name:
Jack Riegel
Phone: 210 522-3181 URL:
gsa.swri.org
Southwest Research Institute s General Services Administration (GSA) Schedules offer streamlined, simple contracting vehicles. The GSA (www.gsa.gov), established by the 1949 Federal Property and Administrative Services Act, provides other federal agencies with the work environment, products, technology, and other services needed to meet their goals. SwRI s GSA schedules are available online by accessing the hyperlinks below. Southwestern Maintenance Technologies CHULA VISTA, CA 91915-1401
Contact name:
Mike Watson
Phone: 619 743-8884 URL:
www.swmtech.com
SMT can offer a wide range of PM's to extend the life of your machine tools. A SMT engineer can visit your facility and set up a PM schedule that would meet your maintenance and production requirements. Depending on the scope of your requirements a PM should take between 2 to 4 days. SMT engineers will plan around your production requirements to leave your machine running for 14 hours in any 24 hour day. This way the PM will not effect you and your customers on time delivery Space Age Engineering, Inc. Indianapolis, IN 46218
Contact name:
Dee Moeller
Phone: 317 5456466 URL: Machine shop specializing in aerospace parts and components. Space Coast Business Center Cocoa Beach, FL 32931
Contact name:
Sumiko Kuboi
Phone: 321 613-8550 URL:
Http://www.spacecoastbiz.com
Offices Space Science Services, Inc. Dothan, AL 36301-5617
Contact name:
DANIEL L. GEIGER
Phone: 334 677-8565 URL:
spacescienceservices.com
Space Science Services, Inc. is a licensed and registered engineering, testing and inspection company. Our company was incorporated in 1961 and has over 40 years industrial experience providing inspection services to the utility, paper mill, petrochemical, aircraft, aerospace, and construction industries.Our company strives to accommodate the industry's constant demand for a diversified independent testing laboratory by providing field testing and evaluation materials. Our staff of engineers and technicians have many years of broad technical and practical experience in the fields of engineering, nondestructive testing, metallurgical and chemical analysis.We recognize the fact that a great deal of testing depends upon the individual's knowledge, integrity, alertness and honesty.All of our personnel are constantly aware ofthe confidence placed in our organization when we are asked to provide testing and evaluation services. Space Systems Development Inc. Colorado Springs, CO 80962
Contact name:
Mr. Robert B. Bell
Phone: 719 573-5793 URL:
www.disabled-vets.com
Space Systems Development, Inc. OBJECTIVES &#61550; Quality Products &#61550; Responsive Environment &#61550; Effective Support &#61550; Best Value &#61550; Efficient Management SSDI's primary business objective is to provide the necessary Systems Engineering and Technical Assistance (SETA) for the analysis and assessment of Space/Ground Systems Operational Concepts, Network Architectures, Communications, New Technology and Security Requirements. To achieve maximum effectiveness in Concept Design and Systems Analysis, we maintain highly responsive, independent support teams with a broad spectrum of technical and management talent. We understand user requirements, the acquisition processes, and state of the art technologies. Additionally, our in-depth corporate knowledge of aerospace systems and programs allows us to commit SSDI not only to tangible objectives, but also to those more difficult to define criteria such as: quality, effectiveness and efficiency. In this manner we achieve our goal of consistently offering a best value alternative for mission accomplishment regardless of technical complexity. The system engineering and analysis that SSDI provides involves a disciplined process of balancing the risks involved in fielding a reliable system of optimum capability within the hard constraints of resources and time. SSDI, within its own objectives, has no interest in the development or production of commercial hardware, thus fostering an objective view of government or corporate programs and projects. Space Systems Development Inc. (SSDI) Colorado Springs, CO 80962-2550
Contact name:
Mr. Robert B. Bell
Phone: 719 510-5553 URL:
www.disabled-vets.com
INTRODUCTION Space Systems Development, Inc. (SSDI), is a Qualified Service-Disabled Veteran-Owned and operated small business chartered in the State of Colorado on February 14, 1996. Specializing in the aerospace/communications industry, SSDI is an Emerging Small Business as defined in the Federal Acquisition Regulation (FAR) 19.9. SSDI's corporate, technical and administrative offices, located in Colorado Springs, Colorado, maintain a Top Secret facility clearance with staff members having, at a minimum, Secret clearances. Mr. Robert B. Bell, CEO/President, manages the technical and administrative office. Technical supervision is directly overseen by the designated Program Manager and coordinated through and with the Vice President of Space Control Systems. This maximizes control and simplifies review of day to day operations while neither usurping nor diluting the authority and responsibility of designated managers. SSDI provides independent analysis, training and technical/engineering support to the Department of Defense (DoD), other government and corporate agencies on issues of national importance. Our primary activities center around technical studies, training and engineering support in the areas of space systems, communications, systems integration, network architecture, new technology and security assessments.SSDI's primary business objective is to provide the necessary Systems Engineering and Technical Assistance (SETA) for the analysis and assessment of Space/Ground Systems Operational Concepts, Network Architectures, Communications, New Technology and Security Requirements. To achieve maximum effectiveness in Concept Design and Systems Analysis, we maintain highly responsive, independent support teams with a broad spectrum of technical and management talent. We understand user requirements, the acquisition processes, and state of the art technologies. Additionally, our in-depth corporate knowledge of aerospace systems and
programs allows us to commit SSDI not only to tangible objectives, but also to those more difficult to define criteria such as: quality, effectiveness and efficiency. In this manner we achieve our goal of consistently offering a best value alternative for mission accomplishment regardless of technical complexity. Space-Craft Manufacturing, Inc New Haven, CT 06511-5870
Contact name:
VICTOR PAVLICK
Phone: 203 781-8020 URL:
www.space-craft.com
Space-Craft Manufacturing, Inc is an SBA certified Small Disadvantaged Business. ( Tracking # RE00001-0014634).Space-Craft Manufacturing, Inc is certified to ISO 9001:2000 and AS9100Revision B.Space-Craft Manufacturing, Inc specializes in the manufacturing of gas turbine engine parts and airframe components for the aerospace industry.Complex gas turbine engine parts, in the 6 inch to 60 inch diameter range, are produced from billets, bars, plates, castings, seamless forgings and flash welded rings of stainless steel, titanium, high temperature nickel cobalt alloys and aluminum. SPARTA Composites San Diego, CA 92121
Contact name:
Michael M. Holland
Phone: 858 455-1650 URL:
www.composites.sparta.com
Specialized Metals (BB&G Enterprises) Coral Springs, FL 33076
Contact name:
William D. Garbizo
Phone: URL: http://www.specializedmetals.com Metal service center providing raw materials for the aerospace, marine and industrial markets. We also support the U.S Government directly at their depots and ship direct to their customers who are other military facilities that support DOD programs around the globe. Are primary products are ferous, non-ferous alloys that include tube, pipe, sheet, plate, rod, bar, wire, extrusions, shapes, forgings, billets, rings. We also support the space shuttle on titanium tube contracts for the solid rocket boosters. In addition were certified by the U.S. Navy to supply ""Level 1"" material for the U.S. Trident Submarine Fleet. Specialty Hose Corp. North Canton, OH 44720-6908
Contact name:
Michael L. Helfer
Phone: 330 497-9650 URL:
http://www.specialtyhose.com
We are a leading manufacturer of Teflon, metal and rubber hose assemblies and accessories.
We serve the commercial, aerospace and government markets. Spectra Iindustries Glenolden, PA 19036
Contact name:
ROBERT LAMBERT
Phone: 610 622-6700 URL:
www.spectracor.com
TEMPLATE DRILL BUSHING MANUFACTURER . FLAR-A-LOCK ,ACCU-LOCK,PERM-ALOCK,ANSI DRILL BUSHINGS AND FLAR-A-NUT NUT INSERTS. WE ALSO HAVE A FULL ENGINEERING STAFF DESIGNING IN CATIA, UGI, SDRC-IDEAS, SOLID WORKS, PDGS TO DESIGN AND MANUFACTURE YOUR TEMPLATE REQUIREMENTS. DESIGN AND MANUFACTURING SERVING THE AEROSPACE, AUTOMOTIVE AND MEDICAL INDUSTRIES. SPENRO Aerospace Tool Supply Grand Prairie, TX 75050
Contact name:
Robert Spencer
Phone: 972 988-6161 URL:
www.aircrafttools.com
Spenro Aerospace tools has wholesaled aircraft maintenance and manufacuring tools for 24 years. Tools include:pneumatic,hand,cutting,swaging,composite,rivet,safety, abrasives plus many other aircraft related products. Manufacturers Represented include SnapOn,Cherry Rivet,ATI,Sioux Pneumatic,Standard Abrasives,plus hundreds more. . Spiral Tool Corp Shohola, PA 18458
Contact name:
FRED MUTZEK
Phone: 570 409-1331 URL:
www.spiraltool.com
Contract and Jobbing Machining - CNC Milling and Turning; Assemblies; Welding; Honing. Serving ALL Industries. Machining ALL machinable Materials. Aircraft, Naval, Ground Vehicle, Ordnance, Naval Minesweeping products. SPRAY BOOTH SYSTEMS INC FORT WORTH, TX 76140-0409
Contact name:
VINCENT D CRAIG
Phone: URL: www.sprayboothsystems.com SBS is the leader in the design, manufacture and installation of quality manual or automatic finishing systems and components.SBS offers ENGINEERING SERVICES to satisfy the most stringent finishing system requirements: Turnkey Systems, Component Design, System Design Service, Energy Saving Systems and Installation Service is Available Worldwide.MANUFACTURED EQUIPMENT: Industrial Process Washers, Dry-off and Cure
Ovens, Dry Filter, Pump and No Pump Paint Spray Booths, Clean Rooms, Burner Control Panels, ETL Listed Electrical Control Panels (Analog, Digital PLC), Re-circulating Paint Booth Air TechnologyDISTRIBUTED EQUIPMENT: Powder Paint Booths, Paint Removal Systems, Application Equipment, Compressors, Volatile Organic Compound (VOC) Abatement Equipment, Conveyors, Air Make Up Units, Incinerators, Sludge Removal SystemsOur products allow finishing operations that insure quality finishes.Systems can be designed to circulate air to reduce energy consumption and to reduce the size of abatement equipment when desired or required.Systems furnished are environmentally and worker friendly, with safety being paramount.Equipment manufactured or distributed meets or exceeds EPA and OSHA requirements in the USA.Our products, have been used for corrosion control and finishing for all types of manufactured products such as planes, trains, vehicles, furniture, fabricated products of various materials, and numerous others items.SBS, Inc. has successfully designed fabricated and installed equipment for all branches of the United States Department of Defense, Army, Air Force, Navy, Marines, Coast Guard and major defense contractors such as ATK, Bell Helicopter, Boeing, Gulfstream Aerospace, Lockheed Martin, NASA, Northrop Grumman, Pratt & Whitney, Raytheon, Vought Aircraft. Paint spray booths from desktop units to aircraft paint spray booth inserts (PSB) are available. Spray Booth Systems, Inc. FORT WORTH, TX 76140-0409
Contact name:
VINCENT D CRAIG
Phone: 817 572-4029 URL:
www.sprayboothsystems.com
SBS is the leader in quality manual or automatic finishing systems and components.SBS offers ENGINEERING SERVICES for the most stringent finishing system requirements: Turnkey Systems, Component Design, System Design Service, Energy Saving Systems and Installation Service is Available Worldwide.MANUFACTURED EQUIPMENT: Industrial Process Washers, Dry-off and Cure Ovens, Dry Filter, Pump and No Pump Paint Spray Booths, Clean Rooms, Burner Control Panels, ETL Listed Electrical Control Panels (Analog, Digital PLC), Re-circulating Paint Booth Air TechnologyDISTRIBUTED EQUIPMENT: Powder Paint Booths, Paint Removal Systems, Application Equipment, Compressors, Volatile Organic Compound Abatement Equipment, Conveyors, Air Make Up Units, Sludge Removal Systems.Successfully completed installations for all branches of the U.S. Department of Defense and major defense contractors such as ATK, Bell Helicopter, Boeing, Gulfstream Aerospace, Lockheed Martin, NASA, Northrop Grumman, Pratt & Whitney, Raytheon, Vought Aircraft. Spray booths from desktop to aircraft sizes are available. Spray Booth Systems, Inc. (SBS, INC.) Fort Worth, TX 76140
Contact name:
VINCENT CRAIG
Phone: 817 572-4029 URL:
www.sprayboothsystems.com
SBS is the leader in quality manual or automatic finishing systems and components.SBS offers ENGINEERING SERVICES for the most stringent finishing system requirements: Turnkey Systems, Component Design, System Design Service, Energy Saving Systems and Installation Service is Available Worldwide.MANUFACTURED EQUIPMENT: Industrial Process Washers, Dry-off and Cure Ovens, Dry Filter, Pump and No Pump Paint Spray Booths, Clean Rooms, Burner Control Panels, ETL Listed Electrical Control Panels (Analog, Digital PLC), Re-circulating Paint Booth Air TechnologyDISTRIBUTED EQUIPMENT: Powder Paint Booths, Paint Removal Systems, Application Equipment, Compressors, Volatile Organic Compound Abatement
Equipment, Conveyors, Air Make Up Units, Sludge Removal Systems.Successfully completed installations for all branches of the U.S. Department of Defense and major defense contractors such as ATK, Bell Helicopter, Boeing, Gulfstream Aerospace, Lockheed Martin, NASA, Northrop Grumman, Pratt & Whitney, Raytheon, Vought Aircraft. Spray booths from desktop to aircraft sizes are available. STAMCO AEROSPACE INC HUNTINGDON VALLEY, PA 19006-4242
Contact name:
GAIL SNYDER
Phone: 215 938-9700 URL:
stamcoaero.com
fastener distributor of military spare parts made to print, MS, NAS, AN and MIL numbers. We also distribute for numerous OEM's. We are a good source for hard to find items. We are a small, woman owned company. Standard Aero San Antonio, TX 78226-2026
Contact name:
David Gay
Phone: 210 334-6105 URL:
www.standardaero.com
StandardAero is a world leader in providing aerospace MRO services. StandardAero performs repair and overhaul on General Electric, Rolls-Royce, Honeywell, and Pratt & Whitney Canada engines used in regional airline, business aviation, helicopter, and military/government markets. StandardAero employs specialized MRO business process transformation practices to both internal operations and in various customer partnerships, resulting in more efficient and effective business performance. StandardAero has over 4000 employees around the world, achieved $1.4B in 2009 sales. Standard Aerospace, LLC Spearfish, SD 57783-3212
Contact name:
Carol Plant
Phone: 605 642-8000 URL:
standardaerospace.com
Wire harness kits, RF Cable, Avionics Trays Standard Wire & Cable Co. Rancho Dominguez, CA 90220
Contact name:
Russ Skable
Phone: 310 609-1811 URL:
www.std-wire.com
Standard Wire & Cable Co. is a manufacturer and distributor of electronic and electrical wire and cable since 1947 which specializes in Mil-Spec, airframe, OEM, and other high temperature applications. We maintain one of the largest inventories of avionic and Mil-Spec wire in the U.S.
including commercial aviation wire for Boeing, McDonnel Douglas, Lockheed, Airbus, and others. Our International Sales Department provides full export documentation and packaging for overseas shipments.We design, engineer, and manufacture custom cables, specializing in small prototype and short run orders requiring quick turnaround. These cables use a wide variety of insulation and jacketing materials, including Teflon, PVC, and Silicone. Our company also maintains a complete line of heat shrinkable products, including Mil-Spec and commercial shrink tubing, transition and breakout boots, high ratio grommets, sealant tape, and accessories. Stanford Technology Corp. Stamford, CT 06907
Contact name:
CHAS C CULLARI
Phone: 203 348-4080 URL: Independent Testing Laboratory; Qualification and Acceptance Testing of Electrical, Mechanical, and Hydraulic Components and Sub-Systems Supplied to the Defense and Aerospace Industries. StarGate Research Bozeman, Mo 59771
Contact name:
Jon A Greenspon
Phone: 406 209-3157 URL:
www.stargateresearch.com
StarGate Research (SRL) is an aerospace prototyping, research and development firm. Our areas of primary operation include: contracted aerospace and energy systems engineering, commercialization of government technologies, independent aerospace and energy research. StarGate Rresearch Laboratory - PI, Inc. Riverside, CA 92509-1115
Contact name:
Jon A Greenspon
Phone: 951 2506684 URL:
www.stargateresearch.com
Stavatti Corporation Eagan, MN 55121
Contact name:
christopher r. beskar
Phone: 651 238-5369 URL:
www.stavatti.com
Manufacturer of next generation aerospace vehicles and defense systems including military and general aviation aircraft. STD Precision Gear and Instrument West Bridgewater, MA 02379-1087
Contact name:
Jim Manning
Phone: 508 580-0035 URL:
www.stdgear.com
Precision Manufacturer Of Spur Gears, Helical Gears, Cluster Gears, Anti-Backlash Gears, Clutch Gears, Face Gears, Planetary Gears, Gear Assemblies, Gear Boxes, Bevel Gears, Miter Gears, Metric Gears, Internal Gears, Idler Gears, Gear Rack and Pinion, Worms Wormshafts, Splines, Spline Shafts, Serrated Shafts & Armature Shafts. Steelman Associates, Ltd. Pacific City, OR 97135
Contact name:
Mark R. Steelman
Phone: 503 636-6735 URL:
steelman-associates-ltd.com
Stellar Solutions, Inc. PALO ALTO, CA 94306
Contact name:
ANNE PERT
Phone: 650 473-9866 URL:
www.stellarsolutions.com
Stellar Solutions, Inc. is an engineering services business providing technical expertise and problem-solving skills to significant national and international aerospace programs. Stellar has distinguished itself by satisfying its customersâ&#x20AC;&#x2122; critical needs on defense-related intelligence projects, international telecommunications satellites, commercial imagery satellites and NASAâ&#x20AC;&#x2122;s planetary missions.Stellar Solutions provides rapid response that critical projects demand by focusing a team on strategic problem areas. These highly productive teams deliver expert system engineering/integration, Strategic planning, program management and Mission operations. STEPHENS PRECISION INC Bradford, VT 05033
Contact name:
Ann STEPHENS
Phone: 802 222-9600 URL:
http://www.stephensprecision.com
ISO Registered, NASA flight approved w/ no restrictions, WOSB, precision machine shop specializing in small lot runs (1-500 in any one Lot) of small parts and assemblies involving turning, milling, grinding, honing with special processes subcontracted.The company has 11-15 employees and has been in business since 1981.Approvals: Boeing,Goodrich Aerospace, NASA Marshall Space Flight Center. Registrations: AS9100, ISO9001, ITAR, FFL. Stephens Precision, Inc. Bradford, VT 05033-0705
Contact name:
Ann Stephens
Phone: 802 222-9600 URL:
www.stephensprecision.com
Woman-owned machine shop. in business over 20 years, registered to ISO 9001:2000 specializing in small parts in small volume (1-500 in any one lot) with vendor codes for several prime contractors, mostly in aerospace. STORK SP AEROSPACE BV GELDROP, - 5661NB
Contact name:
Alex Hassig
Phone: 40 2809164 URL:
www.stork.com
Rotary and fixed wing landing gear manufacturer. Stratoflex Div. of Parker Hannifin Corporation Fort Worth, TX 76114-3605
Contact name:
Cheryl Simms
Phone: 817 210-1211 URL:
www.stratoflex.com
The Stratoflex Division of Parker Hannifin Corporation manufactures PTFE, rubber, rigid and metallic hose assemblies; Mil-Spec and specialty applications including instrumentation, potable water, oxygen, fuel, oil, high pressure hydraulic and extreme high temperature bleed air. Also aerospace quick disconnects, break-away couplings, specialty fittings, hydraulic flow regulators & fuses. Strite Industries Limited Cambridge, ON N3C 1V1
Contact name:
Vincent Nash
Phone: 519 658-9361 URL:
www.strite.com
Incorporated in 1964, Strite Industries is a world-renowned manufacturer of ultra precision machine parts. Starting with seven employees in a 5,000 square foot plant, more than two hundred fifty employees work in our 100,000 square foot plant in Cambridge, Ontario. Our diverse product line and receipt of numerous ISO designations is the result of a highly skilled team working together to manufacture the highest quality parts to extremely tight tolerances. Aerospace, automotive, medical, orthodontic, and nuclear power components are produced using innovative processes and cutting edge materials. In-house capabilities include internal, external, crush (form), thread, and centerless grinding; wire and die-sink electrical discharge machining; vertical and horizontal CNC milling; super high precision turning; heat treating; chrome plating; one and two sided lapping; vertical and horizontal boring and bore finishing; precision checking with Zeiss Coordinate Measuring Machines; certified clean assembly room, and numerous other machines and capabilities necessary to meet the manufacturing and reporting requirements of our international customer base. STRUCTURAL ANALYSIS INC Austin, TX 78733
Contact name:
ELLIS MORGAN
Phone: 512 328-8198 URL:
http://www.sai-mtab.com
Engineering consulting with emphasis on Finite Element Analysis (FEA) in mechanical and aerospace structures. Extensive background in military as well as commercial specifications for shock, vibration, stress and thermal analysis of machinery, electronic equipment, pressure vessels, frame structures and much more. Summit aerospace inc. l.i.c, NY 11101
Contact name:
moon lee
Phone: 718 433-1326 URL:
moonklee@netzero.net
Summit Instruments, Inc Akron, OH 44333-1255
Contact name:
Arne R. van der Heyde
Phone: 330 659-3312 URL:
www.summitinstruments.com
Summit Instruments, manufacturer of precision test and measurement instruments and sensors, specializes in easy-to-use, configurable, small, rugged, accurate accelerometers and inertial sensors and systems. Summit Instruments, Inc. Akron, OH 44333-1288
Contact name:
Mark Hetrick
Phone: 330 659-3312 URL:
http://www.summitinstruments.com
Summit Instruments Inc. provides electronic test and measurement solutions and inertial sensors for demanding industrial, military, aerospace, and research applications. We have been a leader in our field since 1987, meeting complex measurement needs for users worldwide. Summit Technology Services, Inc. Wellsville, NY 14895-1249
Contact name:
Craig Burdick
Phone: 585 593-4241 URL:
www.summit-tsi.com
Software Engineering Consulting Firm providing project solutions and high tech staffing to fortune 500 companies across the US. Expertise in data acquisition, test (ATE)systems, measurement, control, motion, and RF systems, and real-time embedded systems for the industries of avionics/aerospace, military, government, communications, R&D, and manufacturing. Summit utilizes deverse technologies and languages; LabVIEW, TestStand, LabWindows/CVI, VB.Net,
C#, VB, Wonderware, others. ""Cage Code"" facility. SUN COUNTRY INDUSTRIES Albuquerque, NM 87199
Contact name:
LEE ERICKSON
Phone: 505 344-1611 URL:
http://www.suncountryindustries.com
SCI is an aerospace contract manufacturing company specializing in close tolerance machining and precision assembly of jet engine and airframe components, assemblies and kits. A small business, Sun Country Industries has been satisfying customers since 1950 in Albuquerque, New Mexico. ISO 9000:2000 and AS 9100 quality system certified in 1999. Our diverse capabilities include CNC 5-axis milling, turning, and EDM. SCI utilizes Six-Sigma and lean manufacturing techniques to drive down costs and improve productivity, and has consistently offered our customers cost savings and on-time deliveries along with impeccable aerospace quality. Sun Country Industries, Inc. Albuquerque, NM 87199
Contact name:
M. Michelson
Phone: 505 344-1611 URL:
http://www.suncountryindustries.com
SUN COUNTRY INDUSTRIES:Combining Technology, Capabilties, and Capacity, with Supply Chain Management, to provide 6 Sigma Quality Products for Government and Aerospace Primes Suncoast Heat Treat, Inc. Palm Beach Gardens, FL 33410
Contact name:
Mark Brown
Phone: 561 622-2200 URL:
www.heattreatinc.com
Provider of Heat Treating, Vacuum and Honeycomb Brazing Services for the Aerospace, Medical and Commercial Industries. Support Systems Associates, Inc. Melbourne, FL 32901-1936
Contact name:
Chris Chisholm
Phone: 321 724-5566 URL:
www.ssai.org
Support Systems Associates, Inc (SSAI) is a services company providing engineering, logistics, management, and technical support to Government and industry. We are ISO 9001 certified with our main focus on the aerospace industry. SSAI is active in all life cycle phases of the industry providing design, development, test, production, feilding, and supply chain management for aircraft, aircraft systems and subsystems, and ground support systems. Supreme Gear Company
Roseville, MI 48066-4190
Contact name:
Robert A. Diez
Phone: 586 775-6325 URL:
www.supremegear.com
Supreme Gear Co. is a privately owned Hispanic Minority Business headquartered in Roseville, Michigan, which is just north of Detroit. We have been providing creative solutions to aerospace, defense, commercial, and other related industries for over 50 years. Our capabilities include, but are not limited to, manufacturing highly critical and complex aircraft engine and missile gears, gearboxes, gear shafts, spur, helical, worm, and bevel gears, sprockets, cylinders, seal and housing assemblies. Supreme Gear also specializes in production operation off-loading in our CNC turning, CNC milling, CNC OD/ID grinding and gear cutting departments. Our quality management system is registered to ISO 9001-2000 (with AS9100:2001). Supreme Supply Co., Inc. CULVER CITY, CA 90230-6582
Contact name:
REUBEN YAPYUCO
Phone: 310 258-9113 URL: MANUFACTURER OF FILTERS: CUSTOM, AEROSPACE, ELECTRONIC ENCLOSURES, INDUSTRIAL & COMMERCIAL FILTERS. Surface Innovations GRANBURY, TX 76049-7019
Contact name:
Roy Cline Jr
Phone: 817 832-4322 URL: Manufacturing and Assembly of Military and Civilian Aircraftand Space systems. Swales Aerospace Beltsville, MD 20705
Contact name:
Mark Anderes
Phone: 301 902-4866 URL:
www.swales.com
Swales Aerospace, established in 1978, is an employee-owned company that offers a full range of engineering services to the aerospace industry. Swales provides services for study, design, development, fabrication, integration, testing, verification, and operation of space flight as well as ground system hardware and software. Swales is the world leader in development and manufacture of two-phase thermal control technology for space applications. Swangate International Hague, VA 22469
Contact name:
Gilbert Mesec
Phone: 804 472-3677 URL:
http://www.swangate.com
Aviation: Data Acquisition and Analysis related to helicpter dynamics and aircraft vibration analysis and propeller balancing.Electronics testing: pc oscilloscopes, spectrum analyzers, data loggers, and environmental data collection instruments. Electronics equipment support and repair of aerospace equipment. Synergos Solutions, LLC Houston, TX 77087-2598
Contact name:
Keith Sabin
Phone: 713 640-9424 URL:
www.synergossolutions.com
Established in 2001, Synergos Solutions, LLC (Synergos) is a woman-owned, SBA certified HUBZone small business that delivers value added support services through our focus on customer satisfaction. Our diversified service offerings include aerospace Engineering and Technical services, Information Technology, Document Management and Administrative support. Our principles benefit from over 17 years of experience doing business with the federal government, having managed scores of prime contracts and subcontracts with aggregate revenues in excess of $80,000,000. Additional resources and expertise are available to our customers through the Mentor-Protégé relationship Synergos enjoys with Enterprise Advisory Services, Inc. (EASI), a first-class government services provider since 1983. Our in-house experience coupled with the depth of resources provided through our mentor means Synergos represents reliable small business subcontracting. T. S technology inc., FISHERTOWN, PA 15539
Contact name:
SAYEED A. SYED
Phone: 814 839-4864 URL: T.S TECHNOLOGY INC., IS A LEADING MANUFATURER AND SUPPLIER OF HIGH PERFORMANCE LIGHT WEIGHT COMPOSITE AND BALLISTIC PROTECTION PRODUCTS AND MATERIALS, OVER 25 YEARS OF EXPERTIES IN LIGHT WEIGHT COMPOSITES/BALLISTIC PRODUCTS, IN WIDE RANGE OF MARKETS- AEROSPACE, RAILWAY, TRANSPORTATION, SHIPS, LAW ENFORCEMENTS, ARMORED PROTECTION PRODUCTS, EXPLOSIVE PROTECTION, SPECIAL CHEMICALS, PROTECTIVE COATINGS, LAMINATIONS, MOLDINGS, CERAMIC LAMINATION, BODY ARMOR SOFT AND HARD, SHEILDS, PANELS. CONSTRUCTIONS AND FOR MANY OTHER APPLICATIONS CERTIFIED AS A HUB ZONE. Taber Acquisition Corp North Tonawanda, NY 14120
Contact name:
Daube
Phone: 716 694-4000 URL:
www.taberindustries.com
Manufacturer of stainless steel, bonded strain gauge pressure transducers & transmitters for Aerospace, Marine, U.S. Govt., and Industrial applications. The Taber Kenco group makes OBI mechanical punch presses, air or mechanical clutch, 5-20 tons, HD frames, 1-piece crankshafts, plus benchtop models. The Taber Materials Testing group makes the Taber Abraser and other instruments to perform abrasion, stiffness, and scratch testing Taber Industries North Tonawanda, NY 14120-7043
Contact name:
Tom Karlinski
Phone: 716 694-4000 URL:
www.taberindustries.com
For over 45 years, Taber Industries has been supplying high-reliability, high-longevity, hermetically sealed, stainless steel, bonded strain gage pressure transducers and transmitters for Aerospace, Marine, Industrial, Satellite, and Military vehicle industries. Pressure instruments from Taber are used in propulsion systems from Deep Space One to the future DAWN space craft and on many communications satellites. Taber transducers are used for space shuttle ground testing, rocket launch applications, the Textron LCAC, as well as various marine DSRV and military submarine applications. Put our heritage-rich instruments to work in your next project. Taber's Materials Testing Group manufactures the Taber Abraser and other wear testing equipment to determine durability of paints, coatings, rubber, textiles and decorative laminates. Taber Industries, Inc. North Tonawanda, NY 14120
Contact name:
Tom Karlinski
Phone: 716 694-4000 URL:
www.taberindustries.com
For over 45 years, Taber Industries has been supplying high-reliability, high-longevity, stainless steel, bonded strain gage pressure transducers and transmitters for Aerospace, Marine, Industrial, Satellite, and Military vehicle industries. Pressure instruments from Taber are found on Deep Space One and many other satellites, to space shuttle ground testing and rocket launch applications, as well as various marine DSRV and military submarine applications. Taconic (Tonoga Inc.) Petersburgh, NY 12138
Contact name:
SHARON S. GOODERMOTE
Phone: 518 658-3202 URL:
www.4taconic.com
Taconic strives to provide the highest quality products combined with the best customer support available. Developing a wide range of materials, Taconic serves the Industrial Products, Advanced Dielectric, Food Products and Architectural Fabric markets. Taconic produces a wide range of coated materials, including specialty fabrics, pressure sensitive tapes, engineered conveyor belts and silicone products. From radar systems to cellular communication, Taconic ADD's substrates are found where wireless data transmission is essential. Taconic-STL manufactures FR-4 laminates and prepregs to serve the quick turn and specialty markets in North America. Taconic's Food Products Division offers a wide range of fabrics and converted materials to the institutional, retail food and food service markets. Taconic fabrics are designed to provide
lightweight, fire proof, and beautiful alternatives to traditional architectural materials. TAG - Tactical Aerospace Group BELIZE CITY, BZ
Contact name:
Peter Adler
Phone: 310 388-0234 URL:
www.tacticalaerospacegroup.com
TAG designs and manufactures VTOL Unmanned Aerial Vehicle Systems and develops custom and turnkey UAS solutions by integrating industry and COTS flight control systems, ground control stations, instrumentation and various payload and sensory technologies with our unmanned aircraft.Deliverable systems are available for autonomous or remotely piloted unmanned helicopters for military, law enforcement, civil, media, surveillance, scientific and research applications. Talbert Manufacturing, Inc. Rensselaer, IN 47978-7266
Contact name:
Stephen A. Kingman
Phone: 219 863-1941 URL:
www.talbertmfg.com
Designer and manufacturer of heavy haul trailers, both commercial and military, and for special applications such as nuclear or hazadous waste haulage, aerospace transport, building products, mining, and heavy equipment hauling. Tandex Irwindale, CA 91706-2053
Contact name:
Craig T.Goolsby
Phone: 850 835-4447 URL:
www.tandexlabs.com
Tandex Test Labs, Inc. provides electronic testing services for Military, Defense, Aerospace, Commercial, Medical and Industrial applications including MIL SPEC TESTING on semiconductors and most electronic devices. Low and high frequency testing of electronic instruments and components. We offer analysis of components for space flight certification, including: Destructive Physical Analysis (DPA), Failure Analysis (FA), Scanning Electron Microscopy, (SEM), Electrical Performance Analysis and Complete Component Analysis. Tandex specializes in Semiconductor Testing, Screening, Up-screening, Recertification, Qualification, Burn in and Reliability Electrical Testing in our environmental labs. We also provide Nondestructive Shock and Vibration on your semiconductor products and die packaging of obsolete ICs and Transistors. Tape-Rite Co., Inc. New Hyde Park, NY 11040
Contact name:
Andrew Machover
Phone: 800 882-7348 URL:
http://www.taperite.com
TAPE-RITE is a convertor of specialty adhesive tapes servicing industrial consumers worldwide. Our large inventory and on-site processing facility insures the fastest turn-a-round combined witht he highest quality.The products we supply include: electrical and thermal insulating tapes; double-coated tapes (including foam and transfer); gasketing tapes; colored tapes (cloth, paper and vinyl); metal foil tape (aluminum, copper and lead) and many more. Our processing includes: slitting; re-winding; die-cutting; printing and laminating. All work done on premises and fully guaranteed. TCR Prepregs - ATK Space Systems Ogden, UT 84404-1338
Contact name:
Rolf M. Johns
Phone: 435 863 URL: http://www.atk.com/tcr Room-temperature-storable epoxy prepreg materials for fabrication of composite parts. Tow, broadgoods, braids & uni-directional tape. TCS Design & Management Services Warner Robins, GA 31088
Contact name:
JOHN LUPPINO
Phone: 478 328-8537 URL:
www.tcsdesign.com
Engineering & Logistics Aerospace Company Integration Engineering for both Fixed and Rotary wing aircraft TDG AEROSPACE, INC. San Diego, CA 92120
Contact name:
Jerry Bench
Phone: URL: www.tdgaerospace.com Manufacturer of anti ice systems for over air foil application. Primarily dealing with ice formation caused by cold soaked fuel in wing tanks. Teac Aerospace Technologies, Inc. MONTEBELLO, CA 90640
Contact name:
Barbara Cooper
Phone: 323 727-4765 URL:
www.teac-recorders.com
TechFinity, Inc. Los Angeles, CA 90049-4035
Contact name:
H.K. John Armenian
Phone: 818 878-9341 URL:
www.techfinity.com
Aerospace consulting firm dedicated to system engineering, analysis, and software development focusing on missile defense. Techlogic, Inc. Edina, MN 55439
Contact name:
DOUGLAS OLDER
Phone: 952 829-7285 URL:
www.techlogicinc.com
AS 9100, ISO 9001:2000, QS-9000, ISO/TS 16949, TL-9000, ISO-14001, ISO 18000/18001, FDA, and HACCP contulting and training company. Established in 1980. Services provide at client site or at Techlogic, Inc. training facility in Minneapolis, MN. Five full-time consultants. Five registered/certified lead auditors. Techmetals, Inc. Dayton, OH 45403
Contact name:
Phillip Brockman
Phone: 937 253-5311 URL:
www.techmetals.com
Metal Finishing, Plating, and Anodizing Company. Plating processes include: Hard-Chrome, EN, Electroless Nickel, Chrome, Anodize type II & III, Hardcoat, Chemfilm, Alodine, Nickel, Gold, Silver, OptaKoat, Ultrakoat, Armakote, Nickel Boron, Diamond Nickel, Tin, Diamonize, Cobalt, Particle Plating, Co-deposition plating with Diamond & Teflon like particles, Nickel-Teflon, Medical Chrome, and Medical Coatings.Color Anodize Optical Plating & CoatingsR&D Services for: DOD, Nuclear, Government labs, Universities, Industrial, and Commercial customers.Specializing in Engineered Coatings, custom fit to customerâ&#x20AC;&#x2122;s individual needs, and with over 38 years of experience. ISO-9002 - QS-9000 -quality/business systems.Large Parts capabilities up to 14 feet & 10,000 lbs. Hard Chrome Automatics & other automatics and small hand lines.Techmetals can process MIL, AMS, SAE, SAE AMS, ASTM, Medical Specs, and Customer Specs also.Techmetals, Meets the new Chrome PEL required by the OSHA. DOES YOUR CURRENT Chrome Plater meet this new OSHA requirement? Just ask them for their air testing results that meet the NEW OSHA requirements. IF THEY DO NOT MEET THE NEW OSHA REQUIREMENTS THIS COULD STOP SHIPMENTS OR DELAYS.Techmetals Hard Chrome Processes are close looped and do are basically enclosed; therefore, this allows Techmetals to not use blowers and scrubbers. This eliminates fumes from going in our plate and our environment.Techmetals has OD Grinding capabilities for large parts and can also do low volume machining.Cage Code OUVV7, DUNS # 04-6622965 Technical Air Products Belmont, MI 49306-8877
Contact name:
Jeremy Foy
Phone: 616 863-9115 URL:
www.technicalairproducts.com
Manufacturer of modular cleanrooms that are strong, versatile, portable, economical, and easy to assemble. We also offer a complete line of cleanroom components including fan/filter units,
ceiling grid systems, curtains, lights, and other accessories.NTA is a division of Technical Air Products.NTA furnishings are designed for the new millennium and are used in the newest world class submicron Cleanrooms and Gowning Rooms. These furnishings, using only the finest materials, are used in semiconductor, medical, biotech, pharmaceutical, aerospace, and precision molding industries. Technical Marketing Systems, Inc. Bixby, OK 74008-4414
Contact name:
Amber
Phone: 918 366-1122 URL:
www.tmscases.com
TMS designs and manufactures specialized packaging for military, aerospace & commercial applications. Reusable shipping/storage containers; custom fabricated designs, rotationally molded cases, injection molded, etc. for sensitive electronic equipment and other applications. Technical Research Institute (TRI) Sterling, VA 20165-3569
Contact name:
William P. Schneider
Phone: 703 404-8487 URL: TRI imports technology from the former Soviet Union. A small 501.c.3. consists of President, Vice President and treasurer in the US. and a vice president in Moscow, who is a member of the Russian Academy of Sciences Technical Resin Packaging, Inc. Brooklyn Park, MN 55014
Contact name:
Techcnial Resin Packaging, Inc.
Phone: 763 424-7959 URL:
www.techresin.com
Technical Resin Packaging Inc., is a quality contract adhesive packager and adhesive application specialist. Technical Resin Pasckaging's first priority is to supply our customers with the best service, packaging, and adhesive products available in the industry. It is our trained staff's responsiblibty to provide on-time delivery and technical support in order to strengthen the prroductivity of our customers. In addition, Tehcnical Resin packaging respects the confidentiality of the information our customer and manufactures share with us.Technical Resin represnts indusrty leading products. PPG-Aerospace sealants and coatings, Deft Coatings, Shinetsu Silicones, BJB urethans, 3M adhsesives and tapes, PTM&W are just a few of the products we represent. Technical Writing & Engineering Co., Inc. Bloomfield Hills, MI 48302-2067
Contact name:
Michael S. Arlow
Phone: 248 540-8400 URL:
www.technicalmanuals.com
The Technical Writing and Engineering Company provides all of the services necessary to generate promotional material, illustrations, user manuals, training programs, etc. We work directly from client source data and/or from material which we gather, create, etc. When foreign language translation is required, text and page layout are consistent with multilingual presentation and the target audience.As a registered supplier to the United States Government, Department of Defense, the Technical Writing and Engineering Company also supplies documentation and materiel to various foreign ministries of defense, either as a subcontractor or directly, through offset funding programs. Technimeca International Saint-Laurent, QC H4T 1N8
Contact name:
Alain Bilodeau
Phone: 514 739-3193 URL:
www.technimeca.com
Technimeca started operating in 1972 in a 3,500 square feet facility. Today, after experiencing continuous growth, it is operating in a 41,000 square feet facility located in the city of St-Laurent close to the Montreal airport and major highways. In 1987, the owners of Technimeca launched CP Tech Inc. in a 55,000 square feet facility also located in St-Laurent and offering a complete line of surface finishing processes (www.cptech.ca) Working with CP Tech, Technimeca can now offer a complete key-in-hand product that includes procurement, machining, surface treatment and assembly. Technimeca manufactures and assembles small to medium-sized precision machine parts from solid bars , forging and castings to customers' specifications , for the aerospace , transportation and communication industries . The animation shown below represents an exemple of these assemblies. Technimeca uses a computerized system for production management that continuously tracks the different manufacturing steps in order to keep its customers informed . Technology Advancements, Inc. Playa Del Rey, CA 90293-7525
Contact name:
Frank Tai
Phone: 310 823-1701 URL:
www.tai-usa.com
Aerospace Engineering Technical Service and Contract Labor TECHNOLOGY APPLICATIONS INC Boulder, CO 80301-5718
Contact name:
ROBERT MOHLING
Phone: 303 443-2262 URL:
http://www.techapps.com
Technology Applications, Inc. (TAI), founded in 1994 and located in Boulder, CO, specializes in advanced technology development of cryogenic and thermal management systems for DoD/NASA agencies, aerospace prime contractors, and commercial firms. Our expertise and specialty products include cryocooler integration and interfaces involving vibration isolation, remote (distributed) cooling, high-conductance carbon fiber thermal straps; thermal management of electronic components and enclosures; lightweight insulation systems and high-performance dewars; and vapor compression cycle refrigeration.TAI offers unique capabilities for design,
analysis, and prototype development to meet specific cryogenic and thermal management system requirements. TAI has available over 13,000 square feet of office, manufacture and test facilities located near many high technology government/industry labs and their supporting infrastructure of companies. Technology Development Group, Inc. SHAWNEE, OK 74804-9513
Contact name:
David Bergsten
Phone: 405 275-8041 URL:
www.tdgnet.com
TDGI is a full service engineering and manufacturing entity specializing in components and systems for military aircraft. TDGI is primarily a U.S. Department of Defense contractor. Technology Strategies & Alliances (TSA) Burke, VA 22015
Contact name:
Howard K. Schue
Phone: 703 425-1210 URL:
www.tsanda.com
Technology Strategies & Alliances (TSA) is a veteran-owned strategic advisory and management consulting firm. TSA specializes in the provision of strategic planning and support services to organizations associated with advanced technology, communications, infrastructure, logistics, aerospace, intelligence and defense. TSA has an 18-year history assisting a variety of govenment, military, commercial, strategic technology and not-for-profit organizations to successfully meet the challenges of dynamic customer requirements, rapid technology changes, and continuous restructuring. Tekstar Optical Inc. MELVILLE, NY 11747-1234
Contact name:
Glenn Wolk
Phone: 631 421-4818 URL:
www.tekstaroptical.com
Marketers of high quality video lenses including varifocals,monofocals,and motorised zooms.Specialist in long range surveillence optics for aerospace,military,and industrial applications.Offering the finest all glass ""made in Japan""optics available. Telesis Technology Corporation Palmetto, FL 34221
Contact name:
Tony Vibhakar
Phone: 941 795-7441 URL:
www.telesistechnology.com
Manufacturer and Supplier of Electronic Components, transistors, microcircuits, and connectors.FSC codes 5961, 5962, 5905, 5935, 4710, 4720, 3040.
Telonic Berkeley Inc. Vista, CA 92081-7874
Contact name:
Beverly Jorgensen
Phone: 760 744-8350 URL:
www.telonicberkeley.com
Telonic Berkeley, Inc. is a designer of precision microwave products and diesel smoke opacity meters.Founded in 1958, Telonic has been a pioneer in its field and has, over the years, consistently supplied quality products to the Defense, Aerospace, and Telecommunications business. TeqWest LLC Tualatin, OR 97062-7359
Contact name:
John Biermann
Phone: 503 691-2533 URL:
www.teqwest.com
TeqWest is an independent manufacturer's representative serving technology markets in the US Pacific Northwest. We handle lines from many major manufacturers. Most of our products have applications in almost any market, but our focus is in semiconductor, aerospace, biotechnology, and basic scientific research. Texas Almet LP Arlington, TX 76011
Contact name:
Steven W. Flack
Phone: 817 649-7056 URL:
www.honeycombone.com
honeycomb, machined honeycomb parts, aluminum and non-metallic honeycomb sheets and slices, bonded honeycomb assemblies, slotted, commercial/military fixed-wing and rotorcraft, light & airflow straightners, EMI shielding, sound attenuation Texstars Inc GRAND PRAIRIE, TX 75053-4036
Contact name:
DAVID ROLLINGS
Phone: 972 641-2800 URL:
www.texstars.com
Texstars manufacturers plastic and composite components for the military & commercial aerospace market and the mass transit market (passenger train interiors). These high tech plastic materials are converted via vacuum forming, blow molding, composite lay up, injection molding and RTM. Texstars is also a major manufacturer of military transparencies for F-16, F-15, F-117, A-10, EA-6B, T-37 and many others. Textron Aerospace Fasteners Santa Ana, CA 92705
Contact name:
Daniel Peters
Phone: 714 850-6014 URL:
www.textronfasteningsystems.com/aerospace
Textron Fastening Systems - AerospaceTextron Aerospace FastenersCherry Rivets - CherryMax, CherryLock, MaxiBolt, Lockbolt, Cherry Buck, Rivet Tooling (G704B, G750A, G784, G84)GSA Contract GS-20F-4052G TFI Aerospace Corporation Orangeville, On L9W 4Z5
Contact name:
Ted Squires
Phone: 519 940-9003 URL:
www.TFI-Aero.com
TFI Aerospace is a manufacturer of bolts & screws for the international aerospace industry, including NAS, MS, NASM, AN and LN standards. TFI also manufactures a wide range of customer specific parts from materials including 300 series stainless, 400 series stainless, A286 CRES, Inconel, and Titanium. TFS Advanced Video Technologies Marlborough, MA 01752
Contact name:
Leisha Stevens
Phone: 508 485-3380 URL:
www.tfsc.com
TFS provides a wide range of computer displays - ideal for industrial manufacturing or process control, aerospace, military and high-end pre-press or CAD applications. Combining the latest imaging technology available with our well-known engineering expertise, we can customize the monitors or displays for your particular application - i.e. rack mount, touch screens, panel mounts, kiosks, cosmetic changes, NEMA, etc. Our services include engineering design services, JIT scheduling, warranty repair programs and hemisphere conversions.OEM Custom Redesign and IntegrationRackmount SystemsTouch ScreensPanel MountsOpen FramesKiosk Monitors and DisplaysNTSC/PAL, DVI, S-VIDEO, SVHSIndustrial/RuggedizedDC PowerNEMAPrivate LabelingCOTSCosmetic CustomizationJIT and Service ProgramsHemisphere Conversions TGC Enterprises, Inc. d/b/a/ Adv. Aerospace Metal Crossville, TN 38555
Contact name:
Tamara K. Kosor
Phone: 931 456-9915 URL:
www.adaerometals.com
Distibutor of raw materials, ferrous & non-ferrous alloys. Bar, Extrusions, Tube, Pipe, Coil, Sheet, Strip, Plate, Honeycomb Core. THE AID CORPORATION Clayton, GA 30525-0018
Contact name:
SANDI LEDFORD
Phone: 706 7824245 URL:
http://www.aidcorporation.com
AIDCORP was founded in 1948. Our primary niche is the supply of high precision tubular parts, machine components and processing to the aerospace industry. AIDCorp specializes in the manufacture of both swaged and flashwelded tubular push-pull and control rods for fixed-wing and rotary wing applications. Certified IS09001 & AS9100. The Bryant Group Indianapolis, IN 46202-3173
Contact name:
Mark Bryant
Phone: 317 423-0609 URL:
bryantgroupjobs.com
Executive Search, Engineering, IT, Finance, NursingContract-Permanent Personnel3rd Party Distribution and Purchasing: Engineering and Aerospace components The Hammack Group, LLC Broomfield, CO 80021
Contact name:
WAYNE A. HAMMACK
Phone: 303 469-7476 URL:
www.hammackgroup.com
The Hammack Group provides professional public relations and management services and is currently involved in aviation event management, public relations, and international aviation projects. Projects have included owning and operating the Coors Light Jet Aerobatic Team; air show production; special events for X-Prize and Jeppesen; and media relations for XCOR Aerospace. International projects include the Northern Lights Jet Team and have ranged from an aviation trade show display for Minolta Cameras in Germany to aircraft acquisition in Russia. The IPL Group, LLC Bokeelia, FL 33922
Contact name:
Michael J. Dreikorn
Phone: 239 283-2839 URL:
www.TheIPLGroup.com
The IPL Group, LLC provides comprehensive management and business process support services for all organizations. We are expert in deploying the concepts of systems thinking theories through the application of Integrated Performance Leadership and the various supporting tools such as Supply-chain accountability, Integrated Knowledge Management, and VISION Center and Network process. This integrated approach drives the waste out of business operations and fosters the collaborative environment required for integrated product/process teams to perform. Our Aerospace Practice provides unique capabilities to support this high-tech and safety critical industry. Other services offered include leadership development, global supplier development, quality management, six sigma, CMMI, Lean, development of effective performance measures, due diligence assessments, training development and delivery, value engineering, drug and alcohol abatement programs and expert witness capabilities. The IPL Group, LLC can provide you a one-stop-shop for most of your organizational performance improvement and regulatory compliance needs.The IPL Group, LLC is a small Service-DAV owned business.
The Omnicon Group, Inc. Hauppauge, NY 11788
Contact name:
Karen J. Frank
Phone: 631 436-7918 URL:
www.omnicongroup.com
The Omnicon Group is an award-winning engineering service firm. We are a leader in software design systems, reliability, maintainability, safety and test equip. engineering supporting the military, aerospace, communications and transportation industries. The PFA Group,LLC LEAGUE CITY, TX 77573-5955
Contact name:
Bruce E.Wilson
Phone: 832 372-3388 URL: Provides procurement cost/price analysis support to the aerospace industry. The Precision Coil Spring Company El Monte, CA 91734-1450
Contact name:
Kathy Marie Ware
Phone: 626 444-0561 URL:
www.pcspring.com
Manufacturer of springs & forms for aerospace, medical, nuclear and commerical industries. Types of springs manufactured: helical, compression, extension, torsion, flat and leaf. We carry over 2500 different alloys, sizes, and forms and have a broad experience with exotic alloys. We are NADCAP certified and comply in full to ISO9001, AS9100, AS9000 and MIL-I-45208 with complete traceability. The Purdy Corporation MANCHESTER, CT 06045-1898
Contact name:
Barry R. Noonan Jr.
Phone: 860 649-0000 URL:
www.purdytransmissions.com
PRECISION MACHINED AEROSPACE COMPONENTS FOR FIXED AND ROTARY WING AIRCRAFT, TURBINES, MISSILE ENGINE AND SENSOR POINTING SYSTEMS,(EXOTIC METALS), INCLUDING COMPLEX GEARING, COMPLETE GEARBOXES, TRANSMISSIONS, AND CRITICAL HELICOPTER COMPONENTS. Thermal Electronics, Inc. Lake Elsinore, CA 92530
Contact name:
Christopher W. Good
Phone: 866 674-7771 URL:
www.thermalelectronics.com
TEI, a small woman-owned corporation, provides quality oriented design and manufacturing of high reliability electronic systems and components for the aerospace, military, and commercial industries. Thermo Cote, Inc. Franklin, NJ 07416-9758
Contact name:
Jennifer Dean
Phone: 973 209-6210 URL:
http://www.thermocote.com
Small business established in 1962. Pioneers in hot melt strippable coatings used to mask and protect metal parts for the electroplating and aerospace industries. Also manufacture industrial janitorial cleaners. THERMOTRON INDUSTRIES Holland, MI 49423-3487
Contact name:
Erin Barkel
Phone: 616 393-4580 URL:
http://www.thermotron.com
Thermotron is a leading manufacturer of total testing solutions including Environmental Test Chambers for Temperature Humidity Testing, Environmental Stress Screening, AGREE Chambers for Combined Environment Testing, Test System Integration, Accelerated Stress Testing, HALT, HASS, Thermal Shock Chambers, Altitude Chambers, Liquid Chillers, and Vibration Test Equipment. Thermwood Corporation Dale, IN 47523
Contact name:
Ruth Schwinghamer
Phone: 812 937-4476 URL:
www.Thermwood.com
Thermwood corporate headquarters are located on a 15 acre site in Dale,Indiana. Our headquarters house the engineering, product development and manufacturing operations as well as the sales and administrative offices. It features a 13,000 square foot customer training and demonstration facility equipped to effectively teach and demonstrate our product line. In addition to its Corporate Headquarters and manufacturing facility in Southern Indiana, Thermwood also maintains a Research & Development facility in Seattle, Washington. Thermwood is currently the oldest CNC router company offering products for the woodworking, plastics and aerospace industries. Thermwood is deeply involved in CNC technology and technology development. It remains the only CNC router company in the world that designs and builds its own high-end CNC control. Thermwoodâ&#x20AC;&#x2122;s control has become a world-wide standard in certain aerospace and defense applications. Thermwood holds over 45 patents in the US and various countries worldwide covering CNC, router and software technology THIERICA INC GRAND RAPIDS, MI 49503-1507
Contact name:
Dani Veenstra
Phone: 616 458-1538 URL:
www.thierica.com
Third Stone, Inc. El Cajon, CA 92020-1145
Contact name:
John Hale
Phone: 619 449-2003 URL: Contract and special project non-metallic fabric sewing. Main stay is aerospace related products, not to exclude protective covers, straps, tarps, padding, insulation blankets. Thomas Dynamics Modeling, Inc. Villa Park, CA 92861
Contact name:
MITCH THOMAS
Phone: 714 637-1124 URL:
www.tdmod.com
Aerospace consulting (decoys, dynamics)Video animations of space scenes. Thompson Environmental Consulting Services, L.L.C. Mandeville, LA 70448
Contact name:
David Thompson
Phone: 985 674-5338 URL: Thompson Environmental Consulting Services, L.L.C. provides high-quality, cost-effective environmental consulting and technical support to a variety of municipal, commercial, and industrial Clients. We also provide Out-Source and Contract technical support to Engineering and Environmental firms on a regular basis. Much of our work involves environmental issues related to property transfers (e.g., Phase I & II ESAs) and re-development (e.g., renovation & demolition planning). Most of our projects come from referrals and previous Clients.The firm is owned and operated by David M. Thompson, a registered Professional Geologist (P.G.) in Mississippi and Arkansas, and a member of the Louisiana Environmental Health (LEHA) and Professionals (LEPA) associations. For more than 18 years he has served as a Geologist, Consultant, Soils Technician, and Field Supervisor on projects throughout Louisiana, Mississippi, Florida, Georgia, and Alabama. His experience includes site assessment & remediation, waste minimization & characterization, field supervision, litigation support, TRI auditing, and permitting. Thompson Technical Consulting LLC Inglewood, CA 90302-7469
Contact name:
Anthony L. Thompson
Phone: 310 415-0422 URL:
www.ttcllcnv.com
Acquisition Management support services; Computer and Networking solutions, site hosting consultation, and recommendations on e-commerce solutions. tifco gage & gear wixom, MI 48393-3610
Contact name:
ms. lisa kaberna
Phone: 248 624-7900 URL:
www.tifcogagegear.com
Manufacturer of gears,gages and shafts for aircraft, automotive and commerical industries.Manufacturer of ""vinco"" wear gage kits for military and aircraft industries.Manufacturer of test gears for the military. TiNi Aerospace, Inc. San Leandro, CA 94577
Contact name:
Michael Bokaie
Phone: 510 483-2564 URL:
www.tiniaerospace.com
Manufacturer of release mechanism for Aerospace and military use. Also, an Engineering research and development firm specializing in products using Shape Memory Alloys (SMAs). Titanium Industries Parsippany, NJ 07054
Contact name:
Dan DiNapoli
Phone: 973 428-1900 URL:
www.titanium.com
World's largest distributor of titanium mill products including bar, billet, plate, sheet, pipe, tube, fittings and fasteners. Titanium Industries Inc. Parsippany, NJ 07054
Contact name:
Dan DiNapoli
Phone: 973 428-1900 URL:
titanium.com
World's largest distributor of titanium mill products including bar, billet, plate, sheet, pipe, tube, fittings and fasteners. TiTech International, Inc. Pomona, CA 91769-3060
Contact name:
Edward Chen
Phone: 909 595-7455 URL:
www.titech-intl.com
Manufacturer of titanium, zirconium, and reactive metal castings for aerospace and nonaerospace industries. Manufacturer of aerospace-grade titanium ingots. Perform R&D for titanium and advanced titanium-based materials, including via SBIR program. Experience with all relevant titanium and zirconium castings specifications, and approvals include some of the world's leading aerospace and non-aerospace OEMs as well as U.S. military. Quality processes are AS9000 and ISO9002 approved as well as NADCAP certified for special processes. Tiyoda-Serec Corporation North Kingstown, RI 02852
Contact name:
William J McCormick
Phone: 401 667-7370 URL:
www.tiyoda-serec.com
Manufacturer of airless vacuum vapor degreasing equipment and drying equipment and technologies. Cleans and drys parts of any size utilizing chlorinated, non-chlorinated bromothane, HFE, HFC, hydrocarbon and azeotropic mixtures of solvents. The equipment is closed looed with built in distillation and recovery. The equipment exceeds all South Coast Air Quality criteria for emissions. Many of our units are custom engineered.The company also manufactures vacuum drying. TMT Research Development, Inc. Smith River, CA 95567
Contact name:
Gary Castelan
Phone: 707 4870307 URL:
tmtresearch.com
Provider of protective coatings for erosion, wear, corrosion, dimensional restoration, product improvement Today & Beyond Ashland, OH 44805
Contact name:
L STEVE ROBERTS
Phone: 419 945-2628 URL:
todayandbeyond.biz
Manufacture safe industrial cleaners and related chemicals. Tom Sheehan, Inc. Reading, PA 19601
Contact name:
TOM SHEEHAN
Phone: 610 478-8448 URL:
www.tomsheehan.com
Marketing communications firm specializing in brand development, marketing communications, ebusiness, advertising and public relations for regional, national and international clients.
Experienced with technical and abstract products and services, including aerospace, communications, infrastructure, metals, engineered materials, etc. Tomak Precision Lebanon, OH 45036-8026
Contact name:
Ann Sullivan
Phone: 513 932-7941 URL:
www.tomak.com
Precision machine shop Tomco Machining DAYTON, OH 45414
Contact name:
James Tomasiak
Phone: 937 264-1943 URL:
www.tomcoaero.com
Tomco Machining is a vertically integrated manufacturer of precision assemblies andsubassemblies. The Company s Quality System is ISO 9001:2000 and AS9100:2004 Rev. B Certified. The Company is NADCAP Accredited to AS7110 for Welding and Brazing. The productline is oriented around tubular and duct type assemblies for the aerospace industry and otherspecialty industrial applications. The Company has tube-bending capability (1/8 to 3.0 ) including tube-in-tube applications, Machining, press and forming, weld and braze, tube beading and flaring (1/4"" to 3.0""), fixture and tool making, flow and pressure testing and a variety of NDT capabilities.The Company works with stainless, aluminum, Inconel, titanium, copper, and castings and forgingsof various metal types. Tomco Machining, Inc. DAYTON, OH 45414-4962
Contact name:
James Tomasiak
Phone: 937 264-1943 URL:
www.tomcoaero.com
Tomco Machining is a vertically integrated manufacturer of precision assemblies andsubassemblies. The Company’s Quality System is ISO 9001:2000 and AS9100:2001Certified. The Company’s product line is oriented around tubular and duct type assemblies for theaerospace industry and other specialty industrial applications. The Company has tube-bendingcapability (1/8” to 3.0”) including tube-in-tube applications, Machining, press and forming, weld and braze, tube beading and flaring (1/4"" to 3.0""), fixture and tool making, flow and pressure testing and a variety of NDT capabilities. The Company works with stainless, aluminum, inconel, titanium, castings, and forgings. TOOL TEK INC New Fairfield, CT 06812-4022
Contact name: Phone: URL:
MR J SCHNEIDER
Top Craft Tool, Inc. Clinton Township, MI 48035
Contact name:
Gary Kimmen
Phone: 586 461-4600 URL:
http://www.topcrafttool.com
Top Craft is Tool & Automation Company. We build Fixtures, Gages, Special Machines, Automated Systems, Material Handling Machines & carts, General Machining. Trac Lubricants & Coatings LLC Yeadon, PA 19050
Contact name:
MICHAEL JUMPER
Phone: 610 622-0694 URL:
WWW.TRACCOATINGS.COM
Manufacturer and distributor of Mil-Spec coatings, dry film lubricants, paints, greases,sealants,lubricants and anti-seize materials. Trace Laboratories Central Palatine, IL 60067
Contact name:
Kevin Mehaffey
Phone: 847 934-5300 URL:
www.tracelabs.com
Trace Laboratories is an independent, internationally accredited, diversified testing facility. Trace provides environmental simulation, electromagnetic compatibility (EMC), electrical, chemical, materials, mechanical, failure analysis, consulting, and training services to numerous industries. Industries served include the military, aerospace, automobile, medical electronics, telecommunications, computer, and other industries. Trans American Transformer E. Setauket, NY 11733
Contact name:
John J. Piraino
Phone: 631 928-0762 URL: Trans American Transformer supplies military & aerospace magnetics. Transistor Devices, Inc Hackettstown, NJ 07840-3904
Contact name:
Norman Wolf
Phone: 908 850-5088 URL:
http://www.tdipower.com
Transistor Devices, Inc. (TDI) is a global supplier of Power Systems Solutions for the Computer/Networking, Telecommunications, Military/Aerospace, Medical and Industrial markets. We have the broadest range of high technology power conversion products available in the marketplace, including DC and AC Power Systems, Power Supplies, Rectifiers, Converters and accessory equipment. Established in 1960, TDI is headquartered in New Jersey, has over 1000 employees and seven facilities located throughout the world. Transtecs Corporation Wichita, KS 67214
Contact name:
Dr. Godwin Opara
Phone: 316 651-0389 URL:
www.transtecs.com
ENGINEERING, MANAGEMENT SERVICES& AEROSPACE MANUAFCTURING Treble One LLC Dayton, OH 45431
Contact name:
CHRIS POMFRET
Phone: 937 256-2285 URL:
www.treble-one.com
Marketing, business development, representation and consultation to aerospace companies wishing to do business with the DoD, especially the AF. Consultation to the DoD especially the AF, and support services such as workshop planning and hosting. Trek Aerospace, Inc. Acampo, CA 95220-0748
Contact name:
HARRY W. FALK
Phone: 209 368-5800 URL:
WWW.TREKAEROSPACE.COM
Trek has developed â&#x20AC;&#x153;Ducted Rotor Softwareâ&#x20AC;? which has lead to a major advancement in the design of ducted fans. It allows Trek to develop ducted fan systems, of any size, which deliver significantly more thrust per horse power than conventionally available alternatives (Propulsive Advantage). Using this advantage Trek as designed a number of vehicles from an OAV-I sized UAV to a manned vehicle capable of carrying a man for over two hours. All of Trek vehicles have significant lifting capabilities when compared to other VTOL vehicles. Trent Tube East Troy, WI 53120-1358
Contact name:
Laura Coppus
Phone: 262 642-7321 URL:
www.trent-tube.com
Trent Tube has been a leading manufacturer of welded stainless steel and high alloy tubular products since 1941. With over 100 alloys ranging in sizes from 1/8"" to 10"" OD, aerospace, power, chemical, petrochemical, nuclear, sanitary, pharmaceutical, semiconductor, and
food/beverage markets are served. ISO certified since 1992 and ASME section III since 1972. Tri Aerospace, LLC Terre Haute, IN 47803
Contact name:
Robert R Brown
Phone: 812 872-2400 URL:
www.triaerospace.com
Precision machining & fabricator of aerospace components. Prototype with concurrent engineering a speciality. Production orders produced with quality, on time, and with a very competitive price. TRI SOURCE INC Shelton, CT 06484
Contact name:
Anita D. Hampel
Phone: 203 9247030 URL:
http://www.trisourceinc.com
For over 30 years, Tri Source has been engineering and manufacturing custom power solutions for demanding applications in the Telecommunications, Defense, Aerospace, Networking and Telecom industries. Tri Sources's products include a full line of Multi-output Switchers, Linear and Ferroresonant power supplies and power conversion systems, ranging in power for 75w to 8,000w, designed to accommodate both custom and standard form factors. Triad Aerospace Incorporated Maple Grove, MN 55369
Contact name:
Renee M. Kantor
Phone: 763 488-1802 URL:
www.triadaerospace.com
Triad Aerospace Incorporated is a family owned and operated distributor of specialty wire & cable, flexible tubing & sleeving, and related interconnect accessories for commercial and military applications. Triad is an authorized distributor for major military and aerospace manufacturers. Our customer base includes military defense contractors; airlines; jet engine & avionics OEM's; aircraft & jet engine repair, overhaul and maintenance firms; medical systems & suppliers; and contract manufacturing firms. Triad has been in business since 1987. Triangle Engineering Corp Idianapolis, IN 46241-4912
Contact name:
douglas staten
Phone: 317 243-8549 URL:
TRICAD, Inc. LAFAYETTE, IN 47905
triangle-engineering.us
Contact name:
Cynthia Lashley
Phone: URL: www.tricad.com TRICAD, Incorporated, founded in 1988, is a complete Mechanical Engineering Design Services organization dedicated to providing exceptional quality and service to our clientele in aerospace, defense and commercial industries.Our mission is supported by the philosophy that within every great company is a power born of vision, shaped by experience and shared by people who work every day to maintain the confidence of and contribute to the success of its customers.TRICAD provides the engineering community with an experienced staff of individuals that utilize advanced Computer Aided Design (CAD) software. TRICAD offers a variety of services, including Design Center engineering staff for outsourced Statement of Work projects, and Technical Staffing solutions.Pro/Engineer CAD Design and Drafting form the mainstay of TRICAD work. We have been leveraging the power of CAD software in general, and Pro/E in particular, for more than a decade to achieve project goals for our customers. There is likely no mechanical design/drafting activity that our exceptionally talented in-house staff has not tackled in our many years.Many of our client projects require the adept use of large assembly management techniques that, when used skillfully, greatly simplify the otherwise complex manipulation of 3D solid geometry within CAD systems.Some of our projects are in support of research and design efforts, wherein TRICAD is given a set of basic design constraints along with a few candidate concept designs. In the backdrop of real world constraints, project schedules and manufacturability, TRICAD delivers a full engineering CAD design, complete with manufacture-ready drawings conforming to all applicable GTOL requirements.TRICAD is a national company, headquartered in Lafayette, IN. United States of America. TRILION QUALITY SYSTEMS LLC Plymouth Meeting, PA 19462
Contact name:
John Tyson II, PE
Phone: 215 710-3000 URL:
www.trilion.com
Optical measurement systems for non-contact, wide area measurement of 3D coordinates, 3D deformations and strains. Measurements can be made on all materials, scales, speeds of operation, and enviromental conditions to meet the your needs; from ceramics and metals to thin films and tissues, from static to dynamic (ballistic & blast), from micro to meters wide, from lab to 1000oC. Tri-Mack Plastics Mfg. Corp. Bristol, RI 02809
Contact name:
Tom Kneath
Phone: 401 253-2140 URL:
www.trimack.com
Founded in 1974, Tri-Mack is a fabricator of high performance Thermoplastic parts. Capabilities include: injection molding, CNC turning and milling, tooling, rapid prototyping and assembly. TriMack specializes in high performance thermoplastics such as : Vespel (PI), Torlon (PAI), VICTREX PEEK, Ultem (PEI),Aurum (PI), Vectra & Zenite (LCP), Fortron and Ryton (PPS), Teflon (PTFE), Nylons, UHMW etc... Tight tolerance and complex shapes are our specialty. ISO 9002 & AS 9000 registered.Military, Aircraft, Aerospace, Chemical Process, Medical, Bearing Applications, Electrical/Electronic and Industrial Machinery/Transportation. Tri-Pacific Consulting Corp
Alameda, CA 94501
Contact name:
PETER KORTMANN
Phone: 510 814-1775 URL:
www.tripac.com
Provide consulting and software development services to both commercial and government entities. Specialize in real-time and complex applications. Tri-Process Company, Inc. Paramount, CA 90723-4214
Contact name:
DENNIS E. BERGLUND
Phone: 562 634-3458 URL: We are a special processor, specializing in Shot Peen, Glass Bead Peen, Peen Forming and Magnetic Particle Inspections. We are an FAA Overhaul Facility and have numerous approvals from aerospace primes, ie. Boeing, Northorp, Lockheed, Airbus, etc. Tri-Tech Precision, Inc. ANAHEIM, CA 92807-6003
Contact name:
ERNIE R HUSTED
Phone: 714 970-1363 URL:
www.tri-techprecision.com
Machining including 5-axis, tooling for aircraft, aerospace, automotive and industrial. CMM inspection. U.S. Small Business Administration HubZone approved. Tri-Tek Electronics, Inc. Valencia, CA 91355-1214
Contact name:
Candace Lopez
Phone: 661 295-0020 URL:
www.tri-tekelectronics.com
We manufacture cable assemblies and wire harnesses for aerospace industry TT electronics integrated manufacturing services Perry, OH 44081-9563
Contact name:
Scott Shepler
Phone: 440 358-5291 URL:
www.ttelectronics-ims.com
TT electronics-integrated manufacturing services is a provider of comprehensive electronics design, manufacturing and product management services to global electronic and technology companies. With facilities in five strategic global sites, we provide comprehensive, customized solutions to companies in the medical, telecommunications, aerospace/defence,
industrial/commercial and print sectors. We are an internationally accredited company achieving numerous key quality standards including, BS EN ISO 9000: 2000 Quality Systems Management, BS EN ISO 14001 Environmental Management Systems, BSI kite mark - IPC-A-610D (class 3).www.ttelectronics-ims.com TTF Aerospace LLC Auburn, WA 98002-1379
Contact name:
Brad Wilson
Phone: 253 520-6920 URL:
www.ttfaero.com
TTF Aerospace specializes in aircraft engineering. TUFFER MFG CO, INC. Anaheim, CA 92801-1012
Contact name:
CATHY KIM
Phone: 714 526-3077 URL:
tuffermfg.com
Tulmar Safety Systems Inc. Hawkesbury, On K6A 2B8
Contact name:
Helena vandeweerd
Phone: 613 632-1282 URL:
www.tulmar.com
Tulmar manufactures, repairs and recertifies military support and inflatable safety equipment. The company operates from a modern 60,000 square foot facility located in Hawkesbury, Ontario. Tulmarsâ&#x20AC;&#x2122;s products and services are targeted to the military and aerospace community. Military products include stowage and tie-down equipment, nets, vehicle and weapons covers, tents and shelters, seat covers and seat belts for military vehicles. Inflatable products include life jackets, life rafts, airline training slides, inflatable shelters, inflatable boats and LifeRamp ice/water rescue systems. Tulmarâ&#x20AC;&#x2122;s manufacturing capabilities include sewing, RF welding and adhesive bonding of specialty fabrics. Modern equipment includes a computerized cutting table, RF welders and computerized sewing machines. The company is certified to ISO 9001:2000. Tulmar is certified as an Approved Maintenance Organization by Transport Canada (AMO 67-92) and JAR-145 by Joint Aviation Authorities (JAA 7062). Turnco Tool & Instrument, Inc. Georgetown, TX 78626-7548
Contact name:
Calvin Griffin
Phone: 512 763-8665 URL:
www.turncotool.com
Turnco Tool & Instrument, Inc. is a Women-Owned and operated precision machine shop located north of Austin, TX since 1981. Turnco Tool specializes in precision machining of proto-type, small to medium production runs, hard tooling, jigs and fixtures. We have a well equipped shop
which has wire EDM's, turning centers, machining centers, and toolroom equipped with manual mills and lathes, diesink EDM, surface grinders, OD grinder, jig bores and jig grinders. Our quality department is equipped with a Brown & Sharpe DCC and a cabinet full of gauges and hand tools. Turner and Associates/TCI LAS VEGAS, NV 89129
Contact name:
DAVID TURNER
Phone: 702 367-7038 URL:
www.turnerassociates.com
Turner Consulting, Inc., is a full service Technical Resource and Consulting firm. We provide computer equipment, equipment maintenance support, Local Area Networks and other computer peripherals and. To compliment these services, we also provide both temporary (contract) and permanent Information Services personnel, as well as provide application development services and training support. TCI has an annual budget of $3,000,000. Turner and Associates is built on over twenty-five years of experience and expertise in the areas of Management, Design, Development and Implementation of cross-industry applications and systems. This includes: Education, Public Utilities, Human Resources, Applicant Tracking, Financial, Insurance, Manufacturing, Law, Product Distribution, Order Entry, Health Care, Aerospace, Education, Automobile, Software Development, Computer Systems Internals, Communications and Basic Office Automation. Our website is located at: http://www.turnerassociates.com. My employment background includes several ""500"" companies such as General Motors, ROHR Industries, Glendale Federal Bank, and Blue Cross. His Management experience has been in working with large IBM mainframe centers. I have managed and implemented mini computer environments, as well as implementing wide and local area networks and PC environments. As the Vice President of a $50,000,000,000 national financial institution for a number of years, I utilized my technical and administrative skills on a number of nationwide projects and systems. My leadership and negotiations capabilities have landed Software Development Contracts with Price Pfister, Black and Decker, JS Displays, Inc. and Mikron Products, Inc. I have been instrumental in bringing on clients for Computer Resources, such as TRW, Sprint, Nevada Power, EDS, American Honda, Time Warner, Home Savings of America, Countrywide Mortgage, Metropolitan Water District, Verizon, Binionâ&#x20AC;&#x2122;s Horseshoe and Universal City Studios.Turner Consulting Inc. is also a Xeorox Reseller for their line of copiers and printers. Tuv Usa Incorporated Salem, NH 037079
Contact name:
Walter O'Connor
Phone: 603 870-8026 URL:
www.tuv-usa.com
TUV USA Incorporated is a Global Regulatory Agency with it's headquarters located in Germany. As a global organization our operations were established within North America to better service the needs of U.S. based manufacturing and servicing organizations. Further more we have strategically located our offices through out key regions of the United States allowin us to maximize our ability to service needs of an ever growing market place. As a global organization we have the ability to service the needs of any multinational organization that seeks to utilize one agency for all their regulatory needs. This is where TUV USA Incorporated excels beyond our competitors. We can at any point in time tap into our global resources that inlcude office's in 46 countries located on five continents with over 7000 employees. If your company is serious about working with an organization that basis its objectives centered on integrity, value and customer satisfaction look no further. TUV USA Incorporated with over 150 years of knowledge and experience presently offers and will continue to offer assistance in the following areas but not
limited to product testing, quality managmenet system certification, product inspections, training in a wide range of industries including, Aerospace, telecommunications, automtotive, medical, program management and training. If you would like to come experience the same level of satisfaction and service our existing customers worldwide presently do why not contact us and we can tailor our services to meet your specific needs. TW Metals Carol Stream, IL 60188
Contact name:
Erica McIntosh
Phone: 630 871-7055 URL:
www.twmetals.com
TW Metals is a distributor of tubing, pipe, rod and bar, extrusions and aerospace sheet in carbon and alloy steel, stainless steel, aluminum, nickel alloys and titanium, as well as many other materials. We offer services in precision saw cutting, waterjet cutting, special packaging and kitting. TW Metals is an ISO 9001: 2000 certified company. U.S. Castings, LLC Entiat, WA 98822
Contact name:
John Koegler
Phone: 509 784-4320 URL:
www.us-castings.com
A world-class aluminum casting facility located in Central WashingtonCasting Processes - dry sand, green sand, permanent mold, lost foam and Vacucast.Quality Certifications - MIL-l45208,MIL-Q-9858, ISO 9002, D1-9000, Lloyd's RegistryQ/C Testing - X-ray, Penetrant, Dimensional, Chemical, MechanicalEngineering Services - Solidicication Modeling, Surface Modeling, CAD, Rapid PrototypingValue Added Processes - Heat Treatment, Machining, PowderCoat, NDT U.S. Tool Grinding, Inc. Desloge, MO 63601
Contact name:
Dan Dunlap
Phone: 573 431-3856 URL:
www.ustg.net
U.S. Tool Grinding, Inc. specializes in the reconditiong of cutting tools for the aerospace industry, sharpening more than 1/2 million drills and tools each week. Our U.S. Tool Services division provides integrated supply for cutting tools and other MRO supplies. UNCF Special Programs Corporation Fairfax, VA 22031-4312
Contact name:
Gregory Swanson
Phone: 703 205-6583 URL:
www.uncfsp.org
The United Negro College Fund Special Programs Corporation (UNCFSP) is an independently-
established 501(c)3 nonprofit organization with the broad mandate of serving not only Historically Black Colleges and Universities (HBCUs) but all minority institutions, domestic and international, including Hispanic Serving Institutions (HSIs) and Tribal Colleges and Universities (TCUs). We work with educational institutions for the purposes of education and research development, workforce development, capacity building, technical assistance, fellowships, internships, training and mentoring. United Aerospace Materials, Inc. Montgomery, VT 05470
Contact name:
Lisa C. Lague
Phone: 802 326-2082 URL: Distribution and brokerage of raw metals and materials, such as stainless steels, hi-temp metals, and other materials in sheet or bar form as well as tubing. A small, 100% woman-owned business USA All American, Inc. Chester Springs, PA 19425-0213
Contact name:
Maureen G. Mooney
Phone: 484 680-8634 URL:
www.usaallamerican.com
Our Fuel additives meet EPA standards as well as Cummins, Peugeot, & Caterpillar Keep-Clean & Clean-Up Specifications. Good to -40 deg F. Our ""No Rinse"" Cleaner-Disinfectant meets OSHA Blood Borne Pathogens requirements. Our Aircraft Cleaner will assist aircraft maintenance personnel in complying with the stringent EPA and OSHA standards; it complies with MILPRF-87937D Type I aerospace equipment cleaning specifications.Our products were featured on the cover of the U.S. Dept. of Commerce Trade Publication COMMERCIAL NEWS USA - 2002 USA Information Systems, Inc. VIRGINIA BEACH, VA 23451-6362
Contact name:
Christine Hiner
Phone: 757 491-7525 URL:
www.usainfo.com
USA Information Systems, Inc. is the preferred source for comprehensive federal supply catalog (parts & vendor) content and technical document library consisting of government and Industry specs & standard documents for leading aerospace, defense, high-tech, process manufacturing and other companies. NASA, Army, Navy, Air Force, Marine, DLA and other government agencies worldwide have relied on USA Information Systems for mission critical supply chain data since the company was founded in 1984 USBid, INC Palm Bay, FL 32905
Contact name:
Gary Heyes
Phone: 321 725-9565 URL:
www.usbid.com
USBid is an AS9120 certified,independent distributor of electronic components founded in 1998, that specializes in providing dependable access to reliable electronic components. Services include both the sales and testing of a range of electronic components. USM Aerostructures, Corp. Wyoming, PA 18644-1705
Contact name:
ERNESTO S. JURADO
Phone: 570 613-1234 URL:
usmaero.net
We are a Small Disadvantaged Business (SDB) and a 8(a) Manufacturing Company under the Small Business Administration guidelines providing precision machining and sheet metal manufacturing and integration services to the DoD, commercial aerospace, and major defense contractors such as The Boeing Co, Raytheon, etc. Our commitment is to impeccable quality, ontime delivery and cost reduction through continuous improvement. We are certified AS9100:B Q.M.S. Company and also certified for Fusion Welding for Aerospace AS7110, Class B. V & M Plating Co. Los Angeles, CA 90061
Contact name:
Anthony Babiak
Phone: 310 532-5633 URL:
www.vmplating.com
Please go to our website for more information. V I ENGINEERING, INC. FARMINGTON HILLS, MI 48331-5730
Contact name:
Wyatt Meek
Phone: 651 484-1332 URL:
www.viengineering.com
VI Engineering is an established leader in test and measurement systems integration. With a long and growing list of Fortune 500 customers in the automotive, manufacturing, life sciences and aerospace industries, VI Engineering can provide services that include; the development of test requirements and technical specifications, the establishment of professional software development practices that match CMMI standards, programming in National Instrumentâ&#x20AC;&#x2122;s LabVIEW or TestStand, test validation and verification (FDA CFR 21.11 compliant), and the design of IT infrastructures that facilitate data analysis, eliminate wasteful retesting and assure that a companies investment in data capture is fully leveraged. VI Engineering can also help inhouse programming departments be more productive by providing advanced application development training in LabVIEW or the new GOOP (graphical object-oriented programming) methodology, plus our VISTA brand of LabVIEW Toolsuites includes tools for Configuration Management (with interfaces to MSVSS and Rational ClearCase), Project Management, on-line help file generation, the creation of project documentation and much more. For more information visit our website at www.viengineering.com or contact us via e-mail at info@viengineering.com. All other inquiries can be handled by contacting Randall Richards â&#x20AC;&#x201C; VI Engineering Marketing Manager at 218-489-1200 x246.
V&M Precision Machining and Grinding Brea, CA 92821
Contact name:
Chuck Anderson
Phone: 714 257-4850 URL:
www.vm-machining.com
Family owned and operated Aerospace Machining and Grinding Company. Established 1946. 65,000 sq/ft facility in Brea, CA. supporting State of the Art CNC Milling and Turning Equipment with 3D programing and network connected computers. AS-9100A certification. Woman Owned, 8a, SDB. V_Systems, Inc. Satellite Beach, FL 32937-5431
Contact name:
Jerry Afflerback
Phone: 321 779-2900 URL:
http://www.vsystemsinc.com
V_Systems, Inc. is a woman-owned small business that provides hardware, software and systems engineering for high technology product development. We've engineered a variety of systems and services to include satellite command and control systems, telemetry systems, payload subsystem test equipment, military and commercial avionics and communications systems, reconnaissance management systems, aerospace simulation systems, wireless telecommunications design, RF engineering, custom printed circuit board design, custom enclosure design, and custom design of precision mechanical components. Valley Heat Treat Co. Valley Park, MO 63088
Contact name:
John Crowe
Phone: 636 225-5222 URL:
www.valley-tech.com
Aerospace Certified Heat Treating. Approved by NADCAP, Boeing, Lockheed, Bell, Lear, Embraer and many others. Sister company, Precision Forgings, Inc., makes aluminum aerospace forgings. Valley Industrial X-Ray & Inspection Services, Inc Bakersfield, CA 93308
Contact name:
GregWilliams
Phone: 661 399-8497 URL:
www.vxray.com
Valley Industrial X-Ray & Inspection Services corporate headquarters are located in Bakersfield California. We currently are 65 employees strong with 23 Mobil x-ray units providing inspection services throughout California. Valley Industrial X-Ray & Inspection Services is located in the center of numerous unique industries which provides our employees with a wide range of experience. We provide NDT and inspection services in all aspects of the oil and gas industries,
including exploration, transmission, refining, storage facilities, and all oil related support industries. We also provide inspection services to the aerospace and power generating industries. Our services are available for emergency call outs 24 hours a day seven days a week.VIXR maintains both a State of California and Federal NRC radioactive material licenses.Available ServicesRadiography, IR-192, Co 60, X-Ray MachineMag ParticleDye PenetrantUltransonicPositive Material IdentificationVisual Inspectors & Certified Welding InspectorsASME-API 510, 570, 653 InspectorsLevel III ServicesGPR-Ground Penetrating RadarConstruction Representatives Our management and staff have a common objective to be successful in our industry while providing a healthy, safe, environmentally sound and productive operation. Valley Machine & Engineering Inc. Belgrade, MT 59714
Contact name:
Jim Gier
Phone: 406 388-4026 URL: Valley Machine is a production oriented CNC job shop. We have been in business 33 years, serving the aerospace and medical fields. VALLEY TOOL & MACHINE COMPANY INC Pomona, CA 91768
Contact name:
CHUCK ROGERS
Phone: URL: Aerospace Tooling, Ground Support Equipment, Precision Fabrications. ISO 9002 Certified and Regestered, Boeing Perfered Supplier. Van Dusen & Meyer/ Naiad Marine, Inc Shelton, CT 06484
Contact name:
Scott Anthony
Phone: 203 929-6355 URL:
www.naiad.com
Founded in 1941, Van Dusen & Meyer/ Naiad Marine, Inc has specialized in precision manufacturing for the aerospace industry and marine. Vantage Associates, Inc. Gardena, CA 90248-1801
Contact name:
Robert D. Yarbrough
Phone: 310 329-0046 URL:
www.vantageassoc.com
Vantage Associates, Inc., founded in 1984, specializes in engineering and manufacturing of high performance thermoplastics and composite components. Vantage serves aerospace, defense and commercial markets utilizing a variety of materials and production processes. Thermoplasitc
materials include ABS, Styrene, Polycarbonate, Ultem, Declar, Polyethylene and others, employ vacuum, twin sheet, and pressure forming. Composite materials include glass, Kevlar, graphite reinforcements with a broad range of resin matrices. Processing includes lamination, vacuum bagging, autoclave, compression molding, and sandwich structures among others. Vantage is OSO 9002 registered and meets Boringâ&#x20AC;&#x2122;s stringent D1-9000 quality standard. We offer competitive pricing, in-house tooling, painting, assembly and a range of secondary processing.Current customers include Boeing, Lockheed, ITT Gilfillan, and the US Government, and many more. Vantage Technology LLC Englewood, CO 80110
Contact name:
Darrin J. Lombard
Phone: 303 761-2121 URL:
www.VantageXP.com
Vantage Explosionproof connectors assure safe, reliable interconnects. From the North Slope to The Gulf, on land-based facilities or offshore drilling platforms, in aerospace, petroleum, process manufacturing, chemicals, mining and other industries, Vantage provides the quality solutions you demand.Vantage explosionproof electrical connectors are designed for use in hazardous locations defined by the National Electrical Code, Article 500 Hazardous Locations, Classes I, II, and III, Divisions 1 and 2. Vantage is proud to maintain certifications from nationally recognized testing laboratories, including Underwriters Laboratories, Inc (UL), CSA International (CSA) and MSHA Mines Safety and Health Act. Product nameplates carry relevant listing data, and copies of certifications are available upon request. Vaughn Associates, Inc. Baton Rouge, LA 70898
Contact name:
TOM COONEY JR
Phone: 225 344-4804 URL:
www.vaughn-associates.com
We are a Manufacturer's Representative Firm representing manufacturer's of instrumentation, test and measurement instruments and sensors for the aerospace, industrial, military, paper, plastics, and power industries. Vaupell Inc Seattle, WA 98107
Contact name:
Jim Berett
Phone: 206 676-8201 URL:
www.vaupell.com
Contract manufacturer of components and assemblies for Aerospace, Medical, Electronic and Transport industries. Molders of advanced engineering resins, with considerable secondoperation and assembly facilities. Providing quality components to industry since 1946. VEHICLE EVOLUTION Scotts Valley, CA 95066-5006
Contact name:
GLENN GEHRKE
Phone: 408 857-8193 URL:
vehicleevolution.com
Verify / VSC Irvine, CA 92606-4918
Contact name:
Alan James McIntosh
Phone: 949 622-1225 URL:
www.vscnet.com
Verify / VSC, headquartered in Irvine, California, is the world's leading provider of supplier management, product assurance, and technical support services, specializing in military industrial and aerospace applications. Our international network of qualified specialists, active in 40 countries and over 4000 separate project locations, provide supplier qualification and development, product assurance, technical support, and engineering-liaison functions on both an expeditious and cost effective basis.Our enhanced web connectivity services and dedicated program management team ensure customer access to real time project status information and results. VETJOBS.COM, INC MARIETTA, GA 30007-1445
Contact name:
Buddy Inlow
Phone: 770 9935117 URL:
www.vetjobs.com
VetJobs (www.vetjobs.com) is the largest military related job board, exclusively endorsed by the Veterans of Foreign Wars. Ranked as one of the top 30 recruiting sites (out of 40,000) on the Internet, having received the 2004, 2005 & 2006 WEDDLE's User's Choice Award! VetJobs is accessed by over 7,000 companies and organizations looking to hire veterans, transitioning military personnel and their family members. With over 80,000 active candidates in the resume database, the site receives over 85,000 visitors a month. Engineering, Information Technology, consulting, healthcare, manufacturing, government services, consulting, aerospace, defense contracting, management, sales, project management, logistics, transportation, human resources, etc are all popular disciplines on the site. VetJobs is the leading site for candidates with security clearances, especially at the TS/SCI with poly level. VetJobs is a flat fee site with reasonable costs. For more information, call 877-838-5627. Victoria Halls Gifts Evergreen, CO 80439
Contact name:
Elaine Stacey
Phone: 303 674-1789 URL:
www.victoriahallsgifts.com
Introducing Powerware, your total solution for protecting valuable data and equipment from power problems. Powerware offers a full line of uninterruptible power systems (UPSs), power management software and world class service. Powerware products are used in networking, PC, financial, medical, industrial, voice and data communications, military and aerospace applications - wherever continuous power is essential to daily operations.
Vidaro Corp. Kent, OH 44240-4370
Contact name:
HOWARD FLEISCHMANN
Phone: 330 673-7413 URL:
WWW.VIDARO.COM
VIDARO CORP IS THE LARGEST CLEANROOM GARMENT MANUFACTURINGCOMPANY IN THE U.S. THE COMPANY HAS A REPUTATION FORTHE HIGHEST QUALITY, ON TIME DELV AND AND GREAT SERVICE.FOR MORE THAN 35 YEARS THE COMPANY HAS BEEN DESIGNINGAND SUPPLYING GARMENTS TO THE HIGH-TECHNOLOGY DISCIPLINESOF SEMI-CONDUCTOR, COMPUTER, AEROSPACE,AND MEDICALINSTRUMENTATION,AS WELL AS THE PHARMACEUTICAL, CHEMICAL,PETROLEUM AND OPHTHLAMIC FIELDS.VIDARO PRODUCES, STATIC DISSIPATIVE, NOMEX, AND LINT-FREEGARMENTS AT THEIR FACTORY IN KENT, OHIOFOR MORE INFORMATION PLEASE CONTACT THE COMPANY AT330-673-7413, INFO@VIDARO.COM VIF Molds & Plastics Saint-Hyacinthe, Qu J2S 9E3
Contact name:
Thierry Carriere
Phone: 450 774 6953 URL:
www.vifplastics.com
V I F Mould and Plastics Industries Ltd is a leader in precision injection moulding plastic parts. We are conceptor, injection mold maker and injection molders with 21 injection machines from 40 to 1760 tons and 5 six axis robots. We can offer you an integrated solution for all your molds & plastic needs. Viking Electronics Camarillo, CA 93010-8382
Contact name:
Alan Rubin
Phone: 805 553-9633 URL:
www.vikingconnectors.com
Viking Electronics is a connector manufacturer. We have a standard line of connectors that we market into the aviation marketplace, as well as to industrial companies. We also have complete cable assembly capabilities including overmolding. All assembly is done in our Nogales Mexico facility. Both of our facilities are Boeing approved and we are a gold level supplier to them. Vincent Enterprises Rancho Santa Fe, CA 92067-6121
Contact name:
Becky Vincent
Phone: 858 756-7541 URL:
www.vincent-enterprises.com
Vincent Enterprises specializes in engineering and business services for technology companies and government customers. We are a San Diego based women-owned small business and a
California company registered as RJ Vincent Enterprises LLC. We provide technical and program management services with world-class expertise in the design and development of complex systems in aerospace, defense, consumer electronics, software, and telecommunications. Our technical expertise is centered in design, development, and integration of complex electronics, communications, health management, and power systems, especially for space and aircraft applications. Our past performance includes designing from concept for unmanned vehicles (launch vehicles and UAVs), electronics and avionics, space systems, and C4ISR. Our commercial services include video, voice, and computer system product development and integration for consumer electronics customers. Additional information on Vincent Enterprises can be found on our website at www.vincent-enterprises.com. Virtual Solutions, LLC. PHOENIX, AZ 85027-2824
Contact name:
Art Bejarano
Phone: 602 509-4466 URL:
www.vsols.com
Mechanical EngineeringMechanical DesignStructural AnalysisAnalysisNC Programming / ManufacturingPrototype ManufacturingIndustrial DesignMachine DesignAerospace DesignCommercial designMil Spec DesignPlastic DesignMold DesignTool DesignLegacy data ConversionConsultingPro/E TrainingPro/E ImplementationPro/E User Level ConsultingManufacturing Cost ReductionIndustrial Design ProposalsPro/ENGINEERSDRC IdeasDesign Concept ExplorationConcept Refinement and 3D Database GenerationModel Making and PrototypingMarketing and Advertising PresentationsDesign for Manufacturability (DFM) Visidaq Solutions, Inc. Lakewood, NJ 08701
Contact name:
Vito Bagdonavicius
Phone: 732 901-6100 URL:
www.visidaq.com
We are a manufacturer of INTEGRATED, HIGH PERFORMANCE Data Acquisition systems and software used for simultaneous, real-time, analog and digital sampling. Visidaq systems have been successfully solving test and measurement applications for the AEROSPACE, MANUFACTURING, AUTOMOTIVE, DEFENSE and MEDICAL industries since 1987. Years of field proven applications experience have made Visidaq Solutions a leading supplier of productivity enhancing data acquisition systems and sophisticated, modular software for the acquisition, storage, conditioning, graphic display, analysis and documentation of data. It's interactive, menu driven design is easy to use. Vision Composites, Incorporated Signal Hill, CA 90755
Contact name:
Ted W. Cheng
Phone: 562 989-9700 URL:
www.visioncomposites.com
Engineering, manufacturing, assembly, and testing of precision composites in aerospace and commercial applications
Vitta Corporation Bethel, CT 06801
Contact name:
Paul Petrikas
Phone: 203 790-8155 URL:
www.vitta.com
Manufacturer of nickel alloy powders, tapes, paste & rope. Brazing filler metals for use in the jet turbine & aerospace, OEM & overhaul/repair & other industries. Joining powders. Research & development in joining processes. Coating powders, Thermal spray powders. Vogelin Optical Co., Inc. Norwood, MN 55368
Contact name:
Dick Nightengale
Phone: 952 466-5516 URL:
vogelin.com
Manufacturer of precision optical components and assemblies for aerospace, avionics, defense, and space exploration applications. Supplier of glass and plastic edging and grinding services; and ceramic, porcelain and most optical material fabrication and polishing. Voss Industries, LLC Cleveland, OH 44113-4172
Contact name:
Daniel W. Sedor,Sr.
Phone: 216 771-7655 URL:
vossind.com
Voss Industries specializes in the design, development and manufacture of Band Clamps, VBands, V-Retainer Couplings, Sheet Metal & Machined Flanges, AS 1895 Joints, Metallic Seals, Straps and Assemblies, MS Couplings, Axial-Load Bulge Formed Shapes, Sheet Metal Fabrications and Pneumatic Ducting. Diverse capabilities include CNC machining, precision stamping, deep drawing, roll forming, bulge forming, cold heading. Additional capabilities include seam, resistance and fusion welding and Mil Spec painting.Voss is ISO 9001:2000, AS9100A and CFR 14, Part 21 Certified. VStream Manufacturing, Inc. Schenectady, NY 12306-6806
Contact name:
David W. Dussault
Phone: 518 355-2000 URL:
www.vsmfg.com
VStream Manufacturing Inc. located in Schenectady, NY is a ""virtually integrated"" contract manufacturing company. Specializing in precision custom-machined parts with over 30 CNC turning and milling centers, a complete proto-type machining lab, a complete EDM lab/sinking, wirecutting and hole drilling capability. We are ISO 9001 and aerospace AS 9000 quality certified. We employ a fully integrated enterprise resource planning system to direct all functions of the business. Our Top-Level Management team has been educated from our nations top
engineering and management schools with proven leadership and experience. VT NAIAD Marine Shelton, CT 06484
Contact name:
Mr. David Yish
Phone: 203 929-6355 URL:
www.vtplc.com/vdm
Machine Shops, Precision Turned Product Manufacturer, Machine Shops, Precision Milling, Helicopter & aerospace parts machining, Missle defence parts machining, Ship stabilization and maneuvering systems W & G Machine Co., Inc. Hamden, CT 06517
Contact name:
Jay J. Kroopnick
Phone: 203 288-3871 URL: W & G Machine Co., Inc. has been a part of the aerospace industry as a supplier of helicopter spares since 1952. W & G Machine has expanded its business in 1987 by further seeking contracts from overseas operators of Sikorsky and Boeing built aircraft, notably the Royal Air Force (UK) and the Royal Australian Air Force (RAFF) and the defense forces of Israel and Turkey. Types of aircraft supported extends to Sikorsky (UH60, SH60, H53, H3), Boeing (CH47) and McDonnell Douglas (AH64 Apache).W & G has the capability to manufacture, repair and fabricate components, and sub-components, and also complete the final assembly for a wide range of parts, including Flight Safety Parts (FSP's), utilizing only OEM and W & G approved sources for material supplies and processes. W & G Machine is also involved in facilitating the overhaul and repair of Sikorsky components including Main and Tail Rotor blades, landing gears, main and tail rotor transmissions, horizontal stabilators and other components.In July 1998, W & G was accredited as an ISO9002 Quality Assured Firm. Wall Colmonoy Madison Heights, MI 48071-1880
Contact name:
Domenic Calagna
Phone: 248 585-6400 URL:
www.wallcolmonoy.com
Wall Colmonoy is a global materials engineering group of companies engaged in the manufacturing of surfacing and brazing products, castings, coatings, and engineered components across aerospace, automotive, oil & gas, mining, energy and other industrial sectors. Known for our unique proven way of creating superior performing alloys that extend the useful life of engineered components, we pride ourselves on long-term strategic customer collaboration that produces value-added ideas and creative solutions. Combining over 75 years of engineering technology with a progressive, visionary outlook, Wall Colmonoy offers customers trusted, customized expertise that results in smart innovation and shared growth. WALL, A T COMPANY Warwick, RI 02886-1020
Contact name:
Donna M. Parker
Phone: 401 739-0740 URL:
http://www.atwall.com
A. T. Wall Company is a manufacturer of metal tubing and metal components, manufactured in a variety of materials including invar, kovar, tantalum, copper, bronze, aluminum, stainless steel, other nickel alloys, and precious metals including silver, gold and platinum. The Company services many industries including telecommunications, defense, aerospace, medical, phyics, automotive and semiconductor. Waterjet-Tech, Inc. Auburn, WA 98002
Contact name:
Traci A. Schott
Phone: 253 833-3800 x 15 URL:
http://www.waterjet-tech.com
We provide innovative waterjet engineering and machining services including waterjet feasibility studies, applications engineering, component prototypes and full scale production. Specilizing in small hole drilling and precision cutting. CAD/CAM/CMM & engineering capabilities. Standard and exotic materials: Titanium, Stainless, Inconel, Plastics, Phenolics, Foam, Kevlar, Glass, Marble, Tile and more. Special Equipment/materials:Close tolerance abrasive waterjet systems (5) plus general machine shop equipment. Industries include Aerospace/Defense, Government, Universities, Medical Device/Equipment, Semiconductor, Automotive, Architectural/Art, NASA, Energy, Transportation, etc. Wayne Trail Technologies, Inc. Fort Loramie, OH 45845-0257
Contact name:
John Campbell
Phone: 937 295-2120 URL:
www.waynetrail.com
Builders of press automation, automated tube bending & fabricating equipment, automation for hydroforming, laser welded blank and edge prep equipment. Specialized in provided automated solutions for all of our customer's autoamtions needs. Also a supplier for ground support equipment to the Aerospace Industry. Weber Manufacturing Ltd. Midland, ON L4R 4L1
Contact name:
Tom Schmitz
Phone: 705 527-2956 URL:
www.webermfg.ca
Weber Manufacturing Technologies Inc. is a tooling manufacturer in aerospace, building products, and automotive markets. Founded in 1962, Weber builds molds, Nickel shells and machined metal products. The moulding processes include: Autoclave and Out-of-Autoclave, Compression, Injection, RTM, Resin Infusion, Polyurethane Spray and PVC Slush Processes. Experienced in Steel, Aluminum, Invar, and NVD Nickel. Weber is ISO 9001:2000 Certified, registered with the Canadian Controlled Goods Program for ITAR articles, and AS 9100 registered.
WELLS Aerospace Consulting HEDGESVILLE, WV 25427-3862
Contact name:
William K. Wells
Phone: 304 754-6332 URL:
WESS DEL INC SANTA CLARA, CA 95054-3401
Contact name:
BOB DORRICOTT
Phone: URL: www.wessdel.com Since 1974, WessDel has built a solid reputation based on a commitment to quality in the areas of precision machining and fabrication. This quality commitment has enabled us to emerge as a leader in our field. The continued focus of the company has been to invest in the most efficient manufacturing tools to produce close-tolerance, critical parts. Combining an absolute dedication to service and quality, WessDel has the ability to control the most complex projects from concept to completion. All jobs are routed through a sophisticated planning and scheduling department to assure proper production control.Through constant dedication to improving the quality process, WessDel is known for its value-added concurrent engineering support and as a manufacturer of critical components and integrated assemblies for the semiconductor capital equipment industry and other high technology markets.Much of our continued success and stability is due to our knowledgeable manufacturing team, the average member of which has been with our company at least ten years. This high level of experience has enabled us to develop and implement innovative ideas and solutions to meet the needs of our customers in the aerospace, defense, electronics, semi-conductor, medical, and other commercial industries.WessDel is responsible for the complex electromechanical assembly of several different modules for the semiconductor capital equipment along with the manufacture of certain precision-machined metal components required for the assembly.WessDel is known for its value-added concurrent engineering support and as a manufacturer of components and assemblies for the semiconductor capital equipment market and for industrial, telecommunications, electronics, medical and other applications. The Company has developed core competencies in the design, engineering, manufacturing and assembly of critical components made from advanced materials. The Company uses precisionmachined metals, engineering plastics and environmentally controlled aluminum/beryllium to design solutions that enable its customers' products to overcome technological barriers and enhance performance. The Company offers a full range of services, from initial prototype design to volume manufacturing and customer support.WessDel has emerged as an industry leader in the machining and assembly of close-tolerance machined parts. Based in the Silicon Valley WessDel continues to provide excellent customer service and a continuous improving environmentWessDel is a global provider of advanced manufacturing and supply chain services to original equipment manufacturers (OEMs). The Company's customers include OEMs that have chosen outsourcing as a core manufacturing strategy. WessDel provides integrated supply chain solutions that address all stages of the product life cycle, including engineering and design; new product introduction; global supply chain management; product assembly and system integration; testing, logistics and distribution, and after-market servicesAt WessDel we believe in building long-term partnerships with our customers and suppliers.Customer partnership begins with early involvement and open communication to understand all customer needs. In the early stages of product development we offer experience and assistance wherever appropriate and possible. Our Engineering staff works directly with the customer before the manufacturing process begins. From concept to final production, we work in tandem. Each job is analyzed so that the right
production technique can be applied to satisfy all goals.Supplier partnering enables us to consistently provide our customers with quality and service throughout the supplier chain. Our suppliers proactively improve processes and procedures to meet demanding delivery, quality and cost standards. These standards are monitored and communicated to our suppliers on an ongoing basis.To readily communicate with our customers and suppliers, WessDel has full Internet and electronic file transfer capability. This allows us to:·quickly respond to quotes ·give status updates on projects ·view and use solid CAD models ·communicate schedules and forecasts ·transfer EDI files ·acquire drawings and customer specs ·receive and fill JIT requirements ·send and receive purchase orders The result of strong partnerships is world-class quality and service. West Coast Packing & Crating, Inc. Fremont, CA 94538
Contact name:
Douglas G. Miller
Phone: 510 657-3555 URL:
www.westcoastpacking.com
West Coast Packing and Crating Custom Solutions for Custom Products For over 30 years, West Coast Packing and Crating has been a leader in creating superior packaging design for a variety of industries with a special emphasis on defense and technology. Our custom containers are designed and manufactured to accommodate today's highly sophisticated defense, aerospace, and electronic equipment. Our philosophy in container design is to maximize quality and performance while minimizing our clients materials and costs. Additionally we strive to provide economical and environmentally responsible packaging that incorporates innovative design, product safety and customer convenience. Our over 30 years of experience in the engineering and manufacturing of custom containers for defense and technology industries allows us to offer our customers the ultimate in QUALITY, SERVICE AND VALUE.
West Penn Non-Destructive Testing, Inc. New Kensington, PA 15068-6216
Contact name:
Jim Neidorfer
Phone: 724 334-1900 URL:
www.wpservicegroup.com
West Penn Non-Destructive Testing is ISO 9000 registered, NADCAP accredited, and carries approvals by major manufacturers; recognized as a premier provider of quality testing and inspection services to the aerospace industry.We offer unique, highly specialized services in Ultrasonic C-Scan Immersion, Infrared Thermography, Ground Penetrating Radar, Predictive Maintenance Solutions, and is FAA Repair Station No. WVPR233L (limited to NDT capabilities). Westronic Systems, Inc. Calgary, Al T3G 3S1
Contact name:
Warren T. Barker
Phone: 403 250-8304 URL:
www.westronic.com
Engineers, manufactures and distributes network management solutions for local and international telecommunications, , aerospace, utility, cable, outside plant, OEM and system integrators. Westwind Corporation VIENNA, VA 22182-1958
Contact name:
John Ross
Phone: 703 255-4712 URL: Engineering services for aerospace applications and building energy conservation. High PerformancePC based computers; engineering, CAD, Science workstations;wireless and hardwired LANs. Westwood Precision Inc Everett, WA 98203
Contact name:
Richard Geise
Phone: 425 742-7011 URL:
www.westwoodprecision.com
Westwood has been in business for over 24 years manufacturing small to medium close tolerance parts for the Aerospace, Medical and Electronic Industries through the prototype stage to full production. Some of our customers include Honeywell, Smiths Aerospace and Phillips Medical.By working in partnership with our customers, we are confident that Westwood Precision Inc. can provide your company with the high level of expertise, quality and delivery dependability that all of our customers and yourselves demand. Wiebel Aerospace SUMMERSIDE, Pr C1N 4P6
Contact name:
FRANCISCO VEGA
Phone: 902 888-1615 URL:
www.wiebel.ca
Wiebel Aerospace Inc. SUMMERSIDE, Pr C1N 4P6
Contact name:
FRANCISCO VEGA
Phone: 902 888-1615 URL:
www.wiebel.ca
Wilbrecht Electronics, Inc. St. Paul, MN 55108-5248
Contact name:
Laurie Wilbrecht
Phone: 651 659-0919 URL:
www.wilbrecht.com
Wilbrecht Electronics, Inc. manufactures ultra-low TCR metal foil resistors, unique LED, incandescent, and neon assemblies out of its Huron, SD facility. Wilbrecht also maufactures aerospace quality glass-metal hermetic interconnects which comply with MIL-45208A and MILSTD-105D. Willow Creek Precision Custer, SD 57730-9645
Contact name:
Dennis Van Zanten
Phone: 605 673-3320 URL: Small,responsive, precision machining supplier. Current customer base 80% defense. HUBZone certified. Prototype through small lot production. Wingard & Co., Inc. Baltimore, MD 21215-3314
Contact name:
David Austin
Phone: 410 358-2210 URL:
www.hydroblanking.com
Tunkey manufacturer of Motor Cores and Precision Metal Stampings. In-house Annealing, Epoxy Powder Coating, Bonding of Lamination Stacks, Blanking of Laminations, Laser Cutting of Laminations, Laser Welding WireMasters Inc.
Contact name:
Rush Holladay
Phone: 615 791-0281 URL:
www.wiremasters.net
We stock and sell military specification wire,cable, tubing, connectors, termination sleeves and cable ties. All new with documentation. WM H BREWSTER JR INC Fairfield, NJ 07004-3383
Contact name:
Salvatore T. Freda
Phone: 973 2271050 URL:
http://www.brewster-washers.com
Celebrating our 91st year as a premier, certified quality manufacturer of precision round washers, shims and discs to the leading aerospace, defense, medical, pharmaceutical,and robotics corporations. Also supplying the automotive and computer industries. Wolcott-Park, Inc Rochester, NY 14617-5104
Contact name:
Richard A. Park
Phone: 585 342-3120 URL:
www.wolcott-park.com
Distributor of specialty polymers (Adhesives and Sealants) for the Aerospace, Electronic and Industrial markets.Epoxies, silicones, urethanes, acrylics, mold releases and related products. see:www.wolcott-park.com Wood Machine Corporation Orlando, FL 32824
Contact name:
Dan Wood
Phone: 407 851-8714 URL: Wood Machine Corporation is a 20 year old company that specializes in contract CNC milling and turning for the laser, medical, aerospace and defense industries. Milling capacity is 40x20x28. Pallet changers are used for larger orders. The maximum work envelope for turning is 8x20, with 2.5 diameter bar feed capacity. Our automatic indexing chuck allows for turning four sides with one chucking. Wright Laser, Inc Waverly, MN 55390-0038
Contact name:
Mariellyn Kuske
Phone: 763 658-7103 URL:
www.wrightlaser.com
Wright Laser provides contract manufacturing, clean room assembly, product development and engineering services for the medical, aerospace, and automotive industries. We use Eximer, Yag, and Tlasers to weld, cut, and mark metal and plastics. WRIGHT MATERIALS RESEARCH CO Beavercreek, OH 45430-1120
Contact name:
DR SENG C TAN
Phone: 937 431-8811 URL:
www.wrightmat.com
Wright Materials Research Co. (WMR) is a small minority-owned business founded in 1990. The company has worked with many Federal agencies in developing lightweight advanced materials for aerospace and outerspace structures, and personnel protection. Our mission is to produce ultra-lightweight materials and structures designed to withstand severe conditions (i.e., extreme temperatures, ballistic assault, space travel). Wyle Laboratories, Inc. El Segundo, CA 90245
Contact name:
D.R. Glade
Phone: 310 322-1763 URL:
www.wylelabs.com
Wyle Labs is an engineering firm specializing in high tech testing, life sciences, and technical support services. A diverse range of systems and services is provided to aerospace, military, commercial and government customers. We design and build special test systems ranging from pilot training centrifuges to turnkey acoustic facilities. Test services include simulation of natural and induced environments. Other specialties include testing of complex structures and the operation of flow facilities with high flow, high-pressure gases, liquids, and multiphase flow capabilities. Support services include calibration, data acquisition, control systems, and operation and management of technical facilities. XCOR Aerospace Mojave, CA 93502
Contact name:
Henry Vanderbilt
Phone: 661 824-4714 URL:
www.xcor.com
XCOR Aerospace develops reusable rocket engines and rocket aircraft, focussing on safe, reliable, maintainable operations and non-toxic propellants. xwave Stittsville, ON K2S 1E7
Contact name:
Ron Schneider
Phone: 613 831-0888 URL:
www.xwave.com
xwave delivers systems for computer aided dispatch, information operations, electronic warfare and simulation and training to security, defence and aerospace customers. xwave systems are COTS based utilizing open architecture software to ensure low maintenance costs and easy extendability. YnotLearn, LLC VIRGINIA BEACH, VA 23452-7375
Contact name:
Christine Koch
Phone: 877 965-9668 URL:
www.ynotlearn.com
YnotLearn, LLC is an ePerformance software company headquartered in Virginia Beach, Virginia with an international client base. YnotLearn’s software products are all web based and support enterprise learning management, skill & competency modeling, 360º assessment, apprentice management, online testing and assessment, authoring for web based learning, and enhanced return to work. YnotLearn’s customers come from a broad range of industries including energy, petro-chemical, manufacturing, aerospace, information technology, higher education, entertainment, healthcare and government and include clients like Boeing, Southern Company, Jim Beam Brands, the Commonwealth of Massachusetts, and Sykes Enterprises. YnotLearn’s solutions have been specifically designed in support of use within highly regulated industries where certification maintenance is critical to success Young Minds, Inc Colton, CA 92324
Contact name:
Robert Levine
Phone: 714 970-3902 URL:
www.ymi.com
<p>Young Minds, Inc. develops data storage solutions for medical, banking, government, aerospace, GIS, and other applications that require transparent data handling, 100% reliability, and scalability. We are the industry leader for Unix-based high performance Blu-Ray, CD and DVD recording systems that provide unmatched performance, data portability, and integrity.</p> <p>Our exclusive intelligent controller technology is easy to use, install, and integrate. Solutions are available for most operating systems, including Unix, Linux, and Windows. Y-Tec Mfg. CARSON, CA 90746-3507
Contact name:
Terry Young
Phone: 310 632-9832 URL:
www.ytec.com
Contract manufacturer of machined parts and assemblies for the defense and aerospace industries. Core competency is lean manufacturing of milled parts utilizing a FMS Cell. Can run repeat requirements of product with zero set up or que time. Can run in a fully automated, unmanned lights out mode. Z.I. Chemicals Studio City, CA 91614
Contact name:
Barnaby L. Zelman
Phone: 818 787-7278 URL:
www.zichemicals.com
Aerospace and aviation specialty cleaning and anti-corrosion chemical manufacturer serving military, civilian, and aeropace markets, as well as industrial fields including: petroleum, commercial/industrial, power generation, transportation (trains, buses, trucking), etc. Zephyr Manufacturing Co., Inc. Inglewood, CA 90301
Contact name:
Earl Houston
Phone: 310 410-4907 URL:
www.zephyrtool.com
Manufacturer of aerospace tools for production and maintenance of aircraft specializing in hole preparation and fastening.