Supplier - Fall 2016

S u p pl i e r

Fa l l 2 0 1 6

Inside this issue:

 The latest contracts awarded  How to reach and sell to prime contractors  Military base procurement information and activity  Events  SBA Information

SUPPLIER Supplier magazine connects small businesses with government contracting and subcontracting opportunities. In this publication, check out military and government news so that you can find the best information on possible contracts for your business.

Government contracts guarantee small business opportunities, and with these various resources, you can tap into not only current, but also future contract openings. Because these contracts take time, oftentimes currently reserved contracts become available again; you can use these resources to claim existing small business contracts, or take the chance to look further into future subcontracting opportunities with prime contractors.

If you have any questions regarding this guide, please call our corporate office at (805) 963-7470

ABOUT THIS GUIDE  DOD subcontracting facts and information  Recently awarded contracts  Military base activity and procurement information  Contractors’ contact information

Federal Buyers Guide, Inc. Chief Executive Officer Stuart Miller Vice President of Operations Afzal Hussain Editorial Department Alfonso Delgado IT Department Shawn Whitney Accounting Olivia Rojas Account Representatives John Jenkins Jeff Stakee Simon Livingston Clint Vogel Johan Delsol

 Upcoming tradeshows and events  Small Business Administration information

Copyright © 2016 by Federal Buyers Guide, Inc. All rights reserved. No parts of this publication may be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, or any information storage retrieval system, without written permission of the copyright owner.

Reach us at: editorial@fbgworldwide.com Federal Buyers Guide, Inc. 324 Palm Avenue Santa Barbara, CA 93101 Telephone: (805) 963-7470 Customer Service: (805) 963-6524

Clog Remover Switched to low-flow toilets? Great move, until they get jammed up with paper towels.

The XLERATOR ® high-speed, energy-efficient hand dryer takes care of that problem. XLERATOR offers a 95% cost savings over paper towels, eliminating their labor, maintenance and waste while creating a more hygienic restroom environment. You’ve made the right call on water flow, now it’s time to protect your cash flow.

Eliminate Paper Towels And Make The Change Today!

Contract Holder #GS-07F-0017T

TIME TO THROW IN THE TOWEL®

800.255.9235

exceldryer.com sales@exceldryer.com

SAIC Awarded $575 Million Contract by the U.S. Army Engineering and Support Center Oct. 5, 2016 MCLEAN, Va.--(BUSINESS WIRE)--The U.S. Army Corps of Engineers, Engineering and Support Center, Huntsville (CEHNC) awarded Science Applications International Corp.

(NYSE: SAIC) the High Performance Computing Modernization Program (HPCMP) Integrated Technical Services (HITS) task order to provide program management and technical support necessary to advance the services, capabilities, infrastructure, and technologies in the HPCMP supercomputing centers.

The single-award, hybrid firm-fixed-priced, cost -reimbursable, cost-plus-incentive- fee task order has a oneyear base period of performance, four one-year options, and a total contract value of $575 million, if all options are exercised. Work will be performed at centers in Hawaii, Maryland, Mississippi, and Ohio. The task order was awarded under the U.S. General Services Administration Alliant Governmentwide Acquisition Contract vehicle.

“We are excited to expand our customer base by providing leading services and solutions to CEHNC,” said Jim Scanlon, SAIC senior vice president and general manager of the Army Customer Group. “These world class services will address some of the most challenging problems that face our nation from oceanography and meteorology to nanotechnology and advanced weapon systems. We are proud to continue our commitment to the warfighter and to developing the technologies that shape tomorrow.”

CEHNC provides specialized technical expertise, global engineering solutions, and cutting edge innovations through centrally managed programs in support of national interests. It supports specialized missions that require unique technical expertise in programs with national or broad scope.

Under the HITS task order, SAIC will plan, deliver, execute, analyze, and report on high performance computing projects, services and activities. SAIC will also provide systems engineering and technical support for defining, planning, managing, and executing projects/programs to repair, modernize, improve, and acquire HPCMP and Department of Defense Supercomputing Resource Center assets and capabilities.

About SAIC SAIC is a premier technology integrator providing full life cycle services and solutions in the technical, engineering, intelligence, and enterprise information technology markets. SAIC is Redefining Ingenuity through its deep customer and domain knowledge to enable the delivery of systems engineering and integration offerings for large, complex projects. SAIC’s approximately 15,000 employees are driven by integrity and mission focus to serve customers in the U.S. federal government. Headquartered in McLean, Virginia, SAIC has annual revenues of approximately $4.3 billion. For more information, visit www.saic.com. For ongoing news, please visit our newsroom.

Raytheon Chosen for Cybersecurity Research and Support to U.S. Navy Sept. 29, 2016 DULLES, Va. – PRNewswire -- Raytheon Company (NYSE: RTN) has been awarded a $98 million contract by the U.S. Navy's Space and Naval Warfare Systems Center, Pacific for cyberspace science, research, engineering and technology integration.

"Our team combines Raytheon's warfighting experience, cyber expertise and innovative systems to deliver cyber capabilities on Naval platforms on land, sea and air," said Jack Harrington, vice president of Cybersecurity and Special Missions with Raytheon's Intelligence, Information and Services business. "Raytheon's experience across warfighting systems enables our team to advise SSC PAC leaders on how to develop and integrate next generation cyber capabilities into Maritime Platforms."

This three-year contract includes one two-year option ordering period which, if exercised, would bring the potential value of this contract to $165 million. Work will be performed in San Diego and other continental U.S. and outside continental U.S. locations. Work is expected to be completed Sept. 14, 2019. No funds will be obligated at the time of award.

Raytheon is one of seven awardees of the multi-award indefinite quantity-indefinite delivery contract. This IDIQ contract vehicle covers a wide range of capabilities and services to support Department of Defense Information Network operations, Offensive Cyberspace Operations (Cyberspace Intelligence, Surveillance and Reconnaissance and Defensive Cyberspace Operations.

About Raytheon Raytheon Company, with 2015 sales of $23 billion and 61,000 employees, is a technology and innovation leader specializing in defense, civil government and cybersecurity solutions. With a history of innovation spanning 94 years, Raytheon provides state-of-the-art electronics, mission systems integration, C5ITM products and services, sensing, effects, and mission support for customers in more than 80 countries. Raytheon is headquartered in Waltham, Massachusetts. Follow us on Twitter @Raytheon or at http://www.raytheon.com.

TÜV SÜD America Chemical, Oil and Gas TÜV SÜD America, Chemical, Oil and Gas helps people and organizations drive business performance to levels of excellence. We provide effective training paths to support the growth of individuals and organizations, whether in one of our public training programs or in customized in-house solutions.

To learn more, visit www.tuv-sud-america.com/COG-Training

TÜV SÜD America 1475 East Sam Houston Parkway South, Suite 100, Pasadena, Texas 77503 United States (800) 747-4099 info@tuvam.com www.tuv-sud-america.com/c.o.g

FederalBuyersGuide.indd 1

1/30/2015 10:06:33 AM

Huntington Ingalls Industries Awarded Planning Contract for USS Dwight D. Eisenhower (CVN 69) Sept. 30, 2016 NEWPORT NEWS, Va.(GLOBE NEWSWIRE) -- Huntington Ingalls Industries (NYSE:HII) announced today that its Newport News Shipbuilding division has received a $12 million contract from the U.S. Navy for planning work on the aircraft carrier USS Dwight D. Eisenhower (CVN 69) as part of its planned incremental availability.

The contract is for work to be completed by Sept. 17, 2017, at Newport News and will include planning, material procurement and fabrication in support of executing the required work.

“Maintaining the in-service aircraft carrier fleet involves complex work that requires significant planning and preparation,” said Chris Miner, Newport News’ vice president, in-service aircraft carrier programs. “This planning period enables us to work closely with our Navy customer to develop a framework to ensure successful project execution.”

USS Dwight D. Eisenhower (CVN 69) is the second Nimitz-class aircraft carrier and the first ship named after the 34th president of the United States. The ship was launched in October 1975 by Newport News and is homeported at Naval Station Norfolk.

About Huntington Ingalls Industries Huntington Ingalls Industries is America’s largest military shipbuilding company and a provider of engineering, manufacturing and management services to the nuclear energy, oil and gas markets. For more than a century, HII’s Newport News and Ingalls shipbuilding divisions in Virginia and Mississippi have built more ships in more ship classes than any other U.S. naval shipbuilder. Headquartered in Newport News, Virginia, HII employs nearly 35,000 people operating both domestically and internationally. For more information, visit: HII on the web: www.huntingtoningalls.com HII on Facebook: www.facebook.com/HuntingtonIngallsIndustries HII on Twitter: www.twitter.com/hiindustries

Southern Police Equipment is a 100% Woman Owned Small Business located in Richmond, Virginia. We are celebrating our 45th year of business in 2016. Specializing in products for Law Enforcement, Military/Federal and EMS Agencies with over 11,000 items on GSA. Listed below are the Manufacturers currently on our GSA Contract # GS-07F-0273T Anchor Uniform - Raincoats Alta Industries - Elbow/Knee Pads Armor Express – Body Armor Aspetto – Ballistic T-Shirts Bates- Uniform Shoes Blackinton -Badges/Insignia Blackhawk-TacticalGear Bosik Technologies – Bullet Trap Boston Leather - Duty Gear Boyt Tactical – Gun Cases Brite-Strike - Flashlights /APALS Bushnell – Binoculars, Scopes Code 3 – Light Bars Combined Tactical Systems - Munitions, Restraints Conet Systems – Thermal Targets Converse/Reebok – Military Boots EcoPure – Mini Emergency Respirator EMA Tactical- RONI/Grips Edge Tactical Eyewear EOTech - Weapon Sights Florsheim – Uniform Shoes FLIR-Thermal/NightVisionSystems FP Technologies – Area Lighting Fusion – Climbing Carabiners GH Armor - Ballistic Vests Guardian Outfitters – Moisture Management T-Shirt HESCO-BallisticPlates Highcom Security – Ballistic Plates, Helmets, Vests Humane Restraint- Leather/Poly Restraints HWI Gear – Tactical Gloves Information Display Company- Speed Check System L&R Ultrasonics- Weapons Cleaning Tanks Leatherhead Tools-Entry Tools Liberty Uniform- Class A Uniforms

Mace Security International- Pepper Spray MG Industries – AR15 Components Milspec Plastics – Disposable Restraints Mocean- Bike Patrol Uniforms Night Optics – Night Vision Equipment Otis Technology- Weapons Cleaning Kits Paulson Manufacturing Corp- Riot Shields Peerless Handcuffs- Handcuffs Penn Arms- Munitions Launchers Polarion - HID Lighting R&B Fabrications, Inc – Incident Vests Radians – Safety Vests Revision Military – Ballistic Eyewear, BATLSKIN Helmets Rings Manufacturing – Blue Guns Rockport – Uniform Shoes Safety Innovations – Walkie Clips Samuel Broome Uniform Accessories – Neckties Smith and Warren – Badges/Insignia Southwest Synergistic Solutions – Triage Lights SPE- Survival Armor Streamlight – Flashlights Tactical Solutions – Conversion Kits TacProGear - Ballistic Vests, Helmets Taylor’s Leatherwear – Leather Jackets Thorogood – Boots/Shoes Triple K Manufacturing – Duty Gear Tru Spec/Atlanco – Tactical Uniforms TurboflareUSA – Electronic Flares Uncle Mike’s – Duty Gear,Bags United Shield International – Shields/ Helmets Wigwam Mills, Inc – Tactical Socks Z-Bolt – Tactical Lasers/Illuminators

Please contact Walter Clarke for additional information 800-542-5243 or email walter@southernpoliceequipment.com 7609 Midlothian Turnpike, Richmond, VA 23235 Toll Free: 800-542-5243 Local: 804-323-1855 Fax: 804-323-5067 www.southernpoliceequipment.com

MQ-4C Triton UAS Completes Critical Milestone to Expand Navy’s Maritime Domain Awareness Sept. 26, 2016 Naval Air Station Patuxent River, Md. -- Following a successful Milestone Decision Authority (MDA) led review, the U.S. Navy’s MQ-4C Triton unmanned aircraft system (UAS) obtained positive Milestone C low-rate initial production approval. The decision marks the beginning of the production and deployment phase of the DoD acquisition process.

“Triton’s critical technology is mature, and the system development and design review phases have been successful,” said Doug Shaffer, vice president, Triton programs, Northrop Grumman. “Completion of the full system Operational Assessment (OA) testing exercised in various real-world scenarios validated the system’s ability to protect the Navy’s fleet from evolving threats. We are extremely pleased with the maritime domain awareness products and results coming from Triton.”

An integrated test team made up of Navy personnel from Air Test and Evaluation Squadrons VX-1 and VX-20, Unmanned Patrol Squadron, VUP-19 and Northrop Grumman demonstrated the true reliability of Triton going into Milestone C. The team analyzed and validated sensor imagery and performance at different altitudes and ranges. The aircraft system’s ability to classify targets and disseminate critical data was also examined as part of the OA testing. Successful evaluation of Triton’s time on station confirmed that it will meet flight duration requirements. Triton also transferred full motion video to a P-8A Poseidon in flight, proving a key capability to significantly enhance its ability to detect, track, classify and identify maritime threats.

About Northrop Grumman Northrop Grumman is a leading global security company providing innovative systems, products and solutions in autonomous systems, cyber, C4ISR, strike, and logistics and modernization to customers worldwide. Please visit www.northropgrumman.com for more information.

ShopBot CNC tools are built for your success.

From the small-footprint, power-packed Desktop to ShopBot’s full-size gantry tools, 96 X 48 and larger, ShopBot has the right CNC tool ready for you. Designed, built, and fully supported here in the USA, ShopBot Tools has been making wood shops more productive for 19 years.

ShopBot Desktop

5-Axis Tool

ShopBot Buddy ®

Full Size Tools

We’re more than just tool makers, we’re problem solvers.

Above and beyond the high quality of our CNC tools, we have created, and are constantly building upon, a suite of resources and services that support your success. Learn more at www.shopbottools.com/solutions CNC Tools • Production Support • Training • Tech Support • Community

Give ShopBot Tools a call and let's talk it through. We’ll find the best CNC tool for you and customize your production set up.

888-680-4466 • ShopBotTools.com

Japan Airlines Extends Boeing Parts Solutions Agreement 10 Years Sept. 28, 2016 SINGAPORE -- Boeing [NYSE: BA] announced today an agreement with Japan Airlines to extend its partnership with the company to provide spare parts solutions for another 10 years.

The renewed Japan Airlines agreement for Boeing’s GoldCare Expendables, formerly Integrated Materials Management (IMM), is an expendable parts service solution that builds on more than a decade of success. The partnership reduces the airline’s operating costs by having Boeing manage a majority of its spare parts inventory, providing items to the airline mechanic as needed.

Under the agreement, Boeing will provide the service through 2026.

According to Japan Airlines, Boeing’s exceptional customer support and parts solutions were key factors in the decision to extend the contract.

“Boeing is pleased to continue our long-standing partnership with Japan Airlines, helping to improve operating efficiencies through our parts service,” said Rick Anderson, vice president of sales and marketing, Boeing Commercial Aviation Services. “Our focus is on providing our customers what they need, before they know they need it. This approach, along with our world-class customer support, is what continues to make Boeing a preferred parts provider across the globe.”

The Japan Airlines order demonstrates the increased flexibility of Boeing’s parts business, which continues to evolve and improve based on customer needs and requirements.

In 2015, Boeing increased inventory by 35,000 parts and lowered prices on 24,000 parts. In addition, Boeing has nearly doubled stocked parts for out-of-production airplanes and is offering emergent-build capabilities for customers who need to find parts for out-of-production fleet types.

Boeing is a leader in providing 24/7 support and service to the global aviation industry. In addition to its expanded parts business, Boeing offers the industry’s largest portfolio of services, including retrofits and modifications, subscription-based maintenance programs, engineering support, crew training, route planning, digital crew scheduling, advanced data analytics and software to enhance airlines and leasing company operations.

About Boeing Boeing is the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. A top U.S. exporter, the company supports airlines and U.S. and allied government customers in 150 countries. Boeing products and tailored services include commercial and military aircraft, satellites, weapons, electronic and defense systems, launch systems, advanced information and communication systems, and performance-based logistics and training. For more information, visit http://www.boeing.com.

When Power Quality Matters PowerClamp™ solves PQ problems!

SERIES 4 for branch

circuits. 60,000 surge-amp capacity.

SERIES 6 for subSERIES 10 for main entry panel

protection. 200,000 surge-amp capacity.

panel protection.

100,000 surge-amp capacity.

PowerClamp™ transient voltage surge suppressors (TVSS) provide the best protection against AC power line spikes, surges, and transients.

Since 1979, thousands of PowerClamp™ units have been protecting hospitals, military installations, airports, data centers, broadcasting stations, manufacturing plants and other mission‐critical installations.

PowerClamp™ is the proverbial “ounce of prevention” that will eliminate or minimize downtime and equipment damage caused by power line surges!

For info, please contact Sine Control Technology Inc: 562-493-3589.

www.sinecontrol.com

NASA Awards Booz Allen Hamilton $33.9 Million Contract to Maintain and Operate Incident Reporting Programs and to Conduct Research and Development to Improve Current and Future Systems

Sept. 26, 2016 McLean, VA -- Maintaining and improving the safety, security and performance of the National Airspace System (NAS) and National Rail System (NRS) is critically important to the NASA Ames Research Center (ARC). To achieve these safety goals, NASA is responsible for overseeing operations and maintenance of air and rail voluntary, independent, confidential incident reporting programs and associated data. NASA ARC has awarded Booz Allen Hamilton a $33.9 million Cost Plus-Fixed Fee, Indefinite Delivery, Indefinite Quantity (IDIQ), five year single award contract to support their efforts.

“Having supported the ASRS since 2004, we are thrilled to have been chosen for this engagement and believe that this decision is a testament to the work we’ve completed thus far,” said Paul Chi, Vice President at Booz Allen Hamilton. “We look forward to leveraging our expertise in everything from data security to safety hazard report management to achieve the all-important goal of improving aviation and rail safety for the public.”

Throughout the life of this contract, Booz Allen will assist in the analysis of incident and hazard reports and accumulated safety data provided and developed by the Aviation Safety Reporting System (ASRS) and Confidential Close Call Reporting System (C3RS). The firm will assist to operate, maintain and manage the ASRS and C3RS systems and will process incident or safety hazard reports while ensuring the confidentiality and security of the information.

This contract builds on Booz Allen’s previous work with ASRS, where the firm has proven itself as a valuable partner. Along with a deep-seated history of aviation and railroad safety experience, Booz Allen brings extensive knowledge of IT and data security management.

About Booz Allen Hamilton Booz Allen Hamilton (NYSE: BAH) has been at the forefront of strategy and technology for more than 100 years. Today, the firm provides management and technology consulting and engineering services to leading Fortune500 corporations, governments, and not-for-profits across the globe. Booz Allen partners with public and private sector clients to solve their most difficult challenges through a combination of consulting, analytics, mission operations, technology, systems delivery, cybersecurity, engineering, and innovation expertise.

With international headquarters in McLean, Virginia, the firm employs about 22,600 people globally, and had revenue of $5.41 billion for the 12 months ended March 31, 2016. To learn more, visit www.boozallen.com.Northrop Grumman is a leading global security company providing innovative systems, products and solutions in unmanned systems, cyber, C4ISR, and logistics and modernization to government and commercial customers worldwide. Please visit www.northropgrumman.com for more information.

Get the bench you need and get it fast.

Your work can’t wait. With Pro-Line’s “In Stock” Program, you can get the exact modular workbench your application demands in 5 days or less with your choice of work surface, color, and many accessories and options.

• For decades, Pro-Line workbenches

Dimension Next Modular Workstations

have been synonymous with quality, functionality and unmatched ergonomic design.

Ergo-Line

• Choose from the the manual height adjust Ergo-Line, Millennium II electric height adjusting workbench, the popular Model HD, Dimension Next Modular Workstations, and more.

• Configure your workstation with the exact accessories you need.

• GSA contract GS27F-5066C

www.industrialworkbenches.com

1proline.com (800) 739-9067 Pro-Line is a division of the R.W. Hatfield Co., Inc.

Humana Offers Support to Communities Impacted

by Hurricane Matthew Oct. 12, 2016 CHARLESTON, S.C. -- (BUSINESS WIRE) -Humana Inc. (NYSE: HUM), one of the nation’s leading health benefits companies, announced today that it has launched a series of disaster relief efforts assisting its associates, members and communities impacted by Hurricane Matthew.

Humana Southeast Regional Medicare President Jim Laughlin, said, “We know many of our associates and health plan members, across North Florida, Georgia and the Carolinas, are suffering and in need of our help. We are particularly concerned about the health and wellbeing of those who may be without basic necessities, such as electricity, food and water.”

In response, Humana has taken these steps to assist people and communities affected by the massive storm: Waiving all requirements for primary care physician (PCP) referrals Providing enrollees with the same cost-sharing they would get at an in-network facility Removing prescription drug limitations such as “Refill too soon” rejection notices that prevent replacing lost medications Additionally, the company will perform trade studies, assess the state of development of MGUE for upcoming applications and contribute to architecture development for next-generation GPS/inertial navigation systems.

Opening its toll-free Employee Assistance Program (EAP) hotline beyond Humana associates and members to include the community. Counselors and Work-Life Specialists are available 24 hours a day, seven days a week at 1-866-440-6556 to provide free, confidential assistance to anyone needing help and support in coping with the disaster and its aftermath.

“Devastating storms like this can have a serious effect on the well-being of those trying to cope with the aftermath, which is why we’re encouraging not only our members and associates, but the community at large, to call our free and confidential Employee Assistance Program and speak to one of our counselors,” said Laughlin.

Humana Medicare, commercial and individual members with questions about services available to them should call the toll-free phone number on the back of their Humana ID card.

About Humana Humana Inc., headquartered in Louisville, Ky., is a leading health and well-being company focused on making it easy for people to achieve their best health with clinical excellence through coordinated care. The company’s strategy integrates care delivery, the member experience, and clinical and consumer insights to encourage engagement, behavior change, proactive clinical outreach and wellness for the millions of people we serve across the country. More information can be found at www.humana.com.

General Dynamics Wins $430 Million Contract from U.S. Census Bureau Sept. 29, 2016 Fairfax, Va. -- General Dynamics Information Technology, a business unit of General Dynamics (NYSE: GD), was awarded a contract to provide contact-center systems and operations support for the U.S. Census Bureau’s 2020 Census Questionnaire Assistance (CQA) program. The single-award contract has a value of approximately $430 million over five years.

Under the contract, General Dynamics Information Technology will deliver its Customer Experience Platform solution, hire and train new staff, provide equipment and facilities, perform technology integration and testing and deliver a multi-channel, multi-lingual contact center.

“General Dynamics Information Technology has extensive experience providing cutting-edge IT services,” said Marcus Collier, senior vice president of General Dynamics Information Technology’s Health and Civilian Solutions division. “The CQA program is a key component of the 2020 Decennial Census and our world-class customer experience solution will help the U.S. Census Bureau achieve mission success.”

In 2010, General Dynamics Information Technology supported the U.S. Census Bureau and successfully managed data capture and citizen-contact operations. During that time, the company processed more than 75 million census forms and handled more than 11.5 million citizen-contacts.

For more information about General Dynamics Information Technology, please visit www.gdit.com.

More information about General Dynamics is available atwww.generaldynamics.com.

Northrop Grumman Awarded Contract from US Air Force to Support GPS Modernization Sept. 27, 2016 The U.S. Navy has awarded BAE Systems a $50 million contract option to upgrade four additional Mk 45 Naval Guns on guided missile destroyers (DDG 51s), converting the guns to a fully-digital Mod 4 configuration. The option, exercised under an initial 2015 award, brings the full value of the contract to $130 million for a total of 10 modernized gun systems.

Key updates to the Mod 4 configuration include a mechanically strengthened gun mount and a completely digitized control system. The stronger mount allows the gun to achieve 50 percent higher firing energy, and the new digital control system provides significantly more computing power while utilizing a user interface similar to that of a smartphone. These major enhancements enable the seamless integration of targeting and fire control data, such as GPS, positioning the Mk 45 to fire precision guided munitions at unprecedented ranges.

“The proliferation of high-volume, low-cost threats is driving the need for multi-mission, cost-effective precision fire from naval guns like the Mk 45,” said Joseph Senftle, vice president and general manager of Weapon Systems at BAE Systems. “As a leader in large-caliber naval guns and precision guided munitions, our team is committed to developing reliable and affordable technology that adapts faster and reaches farther than ever before.”

The updated Mk 45 guns are expected to remain in service for decades to come, making the cost-effective Mod 4 conversion and the continued development of advanced munitions — such as the Hyper Velocity Projectile and Standard Guided Projectile — essential components of future surface warfare.

Work on the Mk 45 Mod 4 conversions will be performed at the BAE Systems’ facility in Louisville, Kentucky, with support from its facility in Minneapolis, Minnesota. Delivery of the first upgraded gun will take place in late 2017 with the last delivery scheduled for 2020.

BAE Systems has designed, produced, and supported Mk 45 Mods 0-4 for more than 40 years. The Mk 45 is the lightest, most compact 5-inch fully-automatic naval gun in the world and also the most widely deployed, with more than 260 deliveries to the U.S. Navy and 10 international fleets. The company’s Louisville facility houses its Naval Guns Center of Excellence for manufacturing, providing component and spares fabrication, as well as final system assembly and testing of new and modernized gun systems.

For more information, visit www.baesystems.com.

Over 30 Years Providing Variable Temperature Materials Characterization & Custom Cryogenic Solutions Web: Web www.mmr-tech.com

Email: Email sales@mmr-tech.com

Seebeck Effect Measurement Op cal Studies

Hall Effect Measurement

Phone: Phone (855) 962-9620

Microprobe Sta ons

Create Your Own Liquid Nitrogen ….From Thin Air

Web: Web www.elan2.com Email: Email sales@mmr-tech.com Phone: Phone (855) 962-9620

L-3 Selected by All Nippon Airways to Supply Airbus A320 Full Flight Simulator Sept. 21, 2016 NEW YORK -- (BUSINESS WIRE) -- L-3 Communications (NYSE:LLL) announced today that its Commercial Training Solutions (L-3 CTS) business has been awarded a contract by All Nippon Airways (ANA) to build and deliver an Airbus A320 Full Flight Simulator (FFS). Based on L-3’s RealitySeven™ flight training simulation solution, the device will be installed at ANA’s flight training facility in Tokyo, Japan, and ready to deliver training in September 2017. This will be the first RealitySeven A320 FFS to be installed at ANA’s flight training center and will join an existing RealitySeven B787 FFS at the airline’s Tokyo facility.

“We are excited to build on our partnership with ANA and to expand L-3’s international business,” said Michael T. Strianese, L-3’s Chairman and Chief Executive Officer. “The strong demand we are experiencing for our Commercial Training Solutions business is indicative of the growing global need for qualified pilots and the state-of-the-art tools and comprehensive training options we offer that address all proficiency levels.”

“This award demonstrates our commitment to delivering high-quality training products and services to meet ANA’s long-term fleet expansion plans,” added Alan Crawford, President of L-3 Commercial Training Solutions. “By continuing our long-standing relationship, ANA has affirmed its confidence in L-3’s flexible and cost-effective RealitySeven simulation solution. Delivery of this trainer will enable ANA to grow its training capacity fleet-wide and ensure its requirements are met into the future.”

L-3’s A320 RealitySeven FFS will deliver high degrees of reliability, maintainability and supportability for ANA. RealitySeven simulation solutions – including digital electrical control loading and electric motion systems – will reduce power consumption and provide high trainer availability for the airline, facilitating the lowest life-cycle costs for each device.

"Headquartered in New York City, L-3 employs approximately 38,000 people worldwide and is a leading provider of a broad range of communication and electronic systems and products used on military and commercial platforms. L-3 is also a prime contractor in aerospace systems. The company reported 2015 sales of $10.5 billion.

To learn more about L-3, please visit the company’s website at www.L-3com.com. L-3 uses its website as a channel of distribution of material company information. Financial and other material information regarding L3 is routinely posted on the company’s website and is readily accessible.

Store, manage and control keys, cards and small assets more securely and efficiently with KeyWatcher® Touch. Access is limited to authorized users, and all transactions are recorded with detailed reports available. The system will even automatically email transactional information to any user – at any time. And KeyWatcher’s convenient touchscreen makes removing and returning keys easier than ever. With our modular design and full scalability, it’s easy to see how we keep making key management better. That’s Morse Watchmans’ outside the box thinking – right inside the box.

morsewatchmans.com • 800.423.8256

5494MP-4 Federal Buyers Guide KW Touch 2013 ad RA 8.5” x 11”

Celebrating a 30 Year Business Anniversary!

February 23, 2016 - For the past 30 years, InstaKey Security Systems has prided themselves on client-driven best practices to help meet the demand of a changing business landscape.

It began in 1986, when the business was formed from the search for a simpler alternative to rekeying a facility after hours. “There just had to be a better way. We knew the day the rekeyable lock technology was invented, that we had something powerful”, recalls Scott Serani, President and CoFounder.

Early in the 1990’s, InstaKey Security Systems added additional product lines such as small format interchangeable cores (SFIC) and unique serialized keys to help meet the increased demand for simplicity and cost savings. Significant government contracts and client referrals helped raise awareness about this revolutionary program.

As the lock and key technology matured, InstaKey Security Systems didn’t just stop with the hardware, as they felt there was a better way to manage the information. In 2003, their integrated KeyControl® Program was released. This new program would link together the four Key Control cornerstones, setting them apart as a solution provider. Through restricted serialized keys, rekeyable lock cylinders, patented key management software, and a devotion to program administration, a total Program was born.

In 2006, the cloud-based management software platform, SecurityRecords.com®, was patented, making “real-time” key tracking and decentralized program administration a reality.

Through accessing KeyControl® Program information from anywhere, security management became much simpler to utilize and communicate.

In 2014, a KeyControl® Dashboard was next released into the SecurityRecords.com® platform allowing clients transparency and visibility into all of their Program’s requirements. Through a simplistic design on their homepage, visual charts identify exceptions leading to detailed reporting.

When asked what makes him most proud of his 30 year tenure, Scott Serani replied, “It’s the relationships with our clients. They are not just clients, but our partners and friends. We know they rely upon us and that we share the same level of commitment and dedication to their security and safety.”

Through developing and retaining talent, over 50% of current personnel are tenured with 10+ years. This combined industry knowledge and commitment to their clients provide the most simplistic and cost effective KeyControl® Program.

InstaKey Security Systems would like to take this opportunity to express its appreciation to all clients, distributors, vendors, and business partners for their continued support and commitment over the years.

It’s the collective efforts of these amazing people that has made simple Key Control possibilities, a reality.

What’s next for InstaKey Security Systems? You’ll just have to wait and see! ###

Proudly supports all of your dental, medical, and supply needs.

Supporting your supply needs through the following contracts: NEW! DLA ECAT Dental Program SPM2DE-14-D-7469 DLA ECAT Lab Contract SPM2DE-10-D-7342 DLA Medical/Surgical DAPA Holder SP0200-96-H-5014

FEDERAL SUPPLY SCHEDULES: Pharmaceuticals and Drugs (Anesthetics) V797P-2280D Dental Equipment and Supplies V797P-3160M

HENRY SCHEIN, INC. IS A PROUD FEDERAL SUPPLY SCHEDULE DISTRIBUTOR FOR: Welch Allyn—Medical Equipment and Supplies V797P-4333B Brewer Design Medical Equipment and Supplies V797P-3206M KaVo Dental Equipment V797P-3218M GYN Disposables V797P-4377B Kerr V797D-30021 Imaging Sciences Dental Equipment V797P-3235M Pelton & Crane Contract V797P-3241M Busse Hospital Disposables—Medical Equipment and Supplies V797P-4488B

GPS Time and Frequency Systems

GSync II CommSync II GSync CommSync II-D

AccuSync II

• Single or Dual (Redundant) GPS Receiver & Oscillator • Modular, Hot-Swappable • C/A or SAASM Force 22E or MPE-S GPS Receivers • OCXO and/or Rubidium Oscillators • AC and/or DC Power Options • CommSync II: (13) I/O Module Slots • CommSync II-D: (8) I/O Module Slots

• Single GPS Receiver, Single Oscillator • Modular, Hot-Swappable I/O Modules • C/A or SAASM Force 22E or MPE-S GPS Receiver • OCXO or Rubidium Oscillator • AC or DC Power Options • GSync II: (8) I/O Module Slots • GSync: (4) I/O Module Slots

Over 100 I/O Module Types and Options Available

Ruggedized and Embedded Systems

GSync II-M

NanoSync IV Low-Profile

NanoSync IV

• Rugged System for Deployed Applications, Suitable for Aircraft, Shipboard & Ground Mobile Environments • C/A or SAASM GPS Receiver (MPE-S Type I or II, Force 22E) • Rubidium or OCXO Oscillator Options • Combined Rb Atomic Clock & Low-G Sensitivity Oscillator for Superior Holdover Accuracy & Phase Noise Performance in Shock & Vibration Environments • Very High System Natural Frequencies (All Axes) to Minimize Vibration Coupling to Oscillators

• Rugged System for Deployed Applications, Suitable for Aircraft, Shipboard & Ground Mobile Environments • C/A or SAASM GPS Receiver (MPE-S Type II, Force 22E) • Standard & Low Phase Noise OCXO Oscillator, G-Compensated OCXO • Position/Navigation I/O: Direct User Access to SAASM Receiver Option • Ethernet Port for Configuration, Control, & Monitoring (Telenet & SSHv2), PTPv2, NTPv3 & v4 • Low Power (8.5W @ 12VDC Typ.), Lightweight (2.75 lbs.), Small (8.25” x 4.00” x 2.25”) • Conduction-Cooled Enclosure, Bottom or Side Mounting Option • MIL Connector Options, MIL-STD-461F EMI/RFI & MIL-STD-810 Drip/Rain Gasket Options • NanoSync Standard Adds the Following Features and Options to the NanoSync IV Low Profile: • Rubidium Atomic Clock, Low-G Sensitivity Oscillator, Low Phase Noise Oscillator or Combination of Rubidium and OCXO • MIL-STD-704A & 1275D Compliant Power Supply Option • Time Code: Have Quick PTTI (ICD-GPS-060), HQ II (STANAG 4246) & Extended Have Quick (STANAG 4430) • Low Power (20W @ 24VDC Typ.), Lightweight (4.4 lbs.), Small (8.25” x 4.00” x 3.5”)

JASA Version 3, Annex 1, TFNG Compliant Versions

FEI-Zyfer, Inc. 7321 Lincoln Way, Garden Grove, CA 92841 ~ 714-933-4002 sales@fei-zyfer.com ~ www.fei-zyfer.com

Tool & Part Marking with an Epilog Laser Today, many industries require permanent identification marks on a variety of products. Epilog fiber lasers are

Barcode Your Parts

rapidly becoming a popular choice to meet this demand because of their exceptionally long operational life, lack of required maintenance and alignment, and relatively low cost.

Serialize Your Tools

Etch Barcodes, Logos & Serial Numbers Place your part in the machine and press “print”. Etch your image on a single tool or on an entire jig of parts!

No Dedicated Operator Necessary With 24” x 12” (610 x 305 mm), 32” x 20” (812 x 508 mm), or 40” x 28” (1016 x 711 mm) engraving table choices, you can , you can place an entire tray of parts in the laser system, reducing time spent at the machine.

FIB

ER IN O

2

CO

E

With the+ additionN of the new Dual Source Fusion M2,

No Programming Required

no matter what substrate you’re working with – wood,

There is no need to learn proprietary software with Epilog

metal, plastics – you have a larger-scale system that

Lasers. Simply setup the job in the Windows®-based

meets all of your laser engraving and cutting demands.

design program your operators are comfortable with.

Contact Epilog Laser today for a laser system demo! www.epiloglaser.com/fbg // sales@epiloglaser.com // 888-437-4564

Golden, Colorado

Federal_BG_2016_Federal BG PG 9/22/15 1:50 PM Page 1

HIGH TEMPERATURE MATERIALS FOR ELECTRICAL l STRUCTURAL l INDUSTRIAL l MEDICAL APPLICATIONS TO 4000ºF Flexible Conductive Silver Based Epoxy Duralco™ 125 thermally conductive electrical epoxy bonds to most metals, ceramics and plastics to form a stress-free adhesive bond. Easy to use, ‘one-to-one’ applicator kit.

Continuous service up to 450ºF.

High Temperature Low Expansion Adhesive Resbond™ 905 Quartz is formulated for bondng low expansion and thermal shock resistant ceramics. Ideal for electronic and metallurgical applications to 2500ºF.

Thermally Conductive Adhesives Duralco™ 132 thermally conductive adhesives combine Cotronics’ unique, high temperature resins with highly conductive fillers to form thermally conductive, adhesive bonds with continuous service up to 500ºF.

High Expansion Adhesive Thermeez™ 7030 bonds and protects to 1800ºF. Apply to ceramics, ceramic cloths, door and tadpole gaskets and metals. Excellent adhesion to steel, stainless, aluminum, lead and ceramics.

High Purity, Alumina Adhesive Protects Critical Electronic Components Resbond™ 989 offers continuous protection to 3000ºF. Apply directly to metals, glass, ceramics, graphite and silicon carbide. Provides high bond strength and excellent electrical, moisture, chemical and solvent resistance for bonding and sealing.

You have challenging applications… we have solutions!

High Temperature Products Since 1971

COTRONICS CORP.

131 47th Street, Brooklyn, New York 11232 Call: 718.788.5533 Fax: 718.788.5538 Email: sales@cotronics.com

Web: www.cotronics.com

TECH SUPPORT I CUSTOM FORMULATIONS I QUANTITY PRICING

Federal_BG_2016_Federal BG PG 9/22/15 1:50 PM Page 2

HIGH TEMPERATURE MATERIALS FOR ELECTRICAL l STRUCTURAL l INDUSTRIAL l MEDICAL APPLICATIONS TO 4000ºF Unique, Metallic Adhesives and Putties Forms High Strength Bonds and Repairs for Use to 2000ºF Durabond™ offers excellent adhesion, high temperature bond strength, machinablility, thermal shock resistance and high temp stability. Ideal for repairing and rebuilding cracked metal housings, exhaust manifolds, molds, dies, boilers, pipes, fittings, worn shafts and castings. Available in Aluminum (950), Nickel (952) and Stainless (954) base.

Ultra Temp Bonds, Coats and Protects to 4000ºF Resbond™ Ultra Temp 904 Zirconia Adhesive is a smooth, creamy, paste that’s easily applied to ceramics, graphite and metals and cures to form a reliable adhesive bond, protective coating and encapsulant.

Duralco™ 4538 Epoxy Potting Compound for Encapsulating to 450ºF Encapsulate delicate electronic components for use in severe thermal shock applications. Hi-temperature, super flexible epoxy potting compound has excellent adhesion to most plastics, metals, ceramics, glass, rubber and treated Teflon™. Seals glass ports to brass housings and withstands repeated thermal cycling from -100ºF to 300ºF without cracking. Cures at room temperature.

Rescor™ 901 Alumina Adhesive and Coating Bonds, Coats and Protects to 3200ºF High purity, Alumina Oxide ceramic adhesive is formulated with specialty ceramic binders and cures at room temperature to form a hard surface. Bonds ceramic components, coats transite, mill boards, graphite; repairs ceramic fiber components, and provides protection against diffusion and wetting in brazing or sintering processes.

Resbond™ S5H13 Adhesive Bonds Dissimilar Materials to 500ºF Specially formulated epoxy has excellent high temperature resistance to corrosion, all common chemicals, thermal shock and electricity. Bonds heavy plastic to stainless steel, seals and insulates Bi-Polar, Electro-Cauterizers and withstands steam sterilization cycles.

You have challenging applications… we have solutions!

High Temperature Products Since 1971

COTRONICS CORP.

131 47th Street, Brooklyn, New York 11232 Call: 718.788.5533 Fax: 718.788.5538 Email: sales@cotronics.com

Web: www.cotronics.com

TECH SUPPORT I CUSTOM FORMULATIONS I QUANTITY PRICING

Federal_BG_2016_Federal BG PG 9/22/15 1:50 PM Page 3

HIGH TEMPERATURE MATERIALS FOR ELECTRICAL l STRUCTURAL l INDUSTRIAL l MEDICAL APPLICATIONS TO 4000ºF Duralco™ 4525 Electrically Resistant Epoxy to 500ºF Duralco™ 4525 cures at room temperature providing high bond strength, high temp stability, low shrinkage, excellent chemical, electrical and radiation resistance, and low moisture absorption. Ideal for high performance bonding, potting, sealing, repairs, castings and jigs. UL approved application for fabrication, end seals and installation of thermocouples, pressure, strain gauges and flow measuring instruments.

Durapot™ Epoxy and Ceramic Potting Compounds Series Durapot™ high temperature epoxy and ceramic potting compounds provide up to 3000ºF service. Ideal for casting, embedding and encapsulating electronic applications.

Thermally Conductive Adhesives Duralco™ 132 thermally conductive adhesives combine Cotronics’ unique, high temperature resins with highly conductive fillers to form thermally conductive, adhesive bonds with continuous service up to 500ºF.

High Expansion Adhesive Thermeez™ 7030 bonds and protects to 1800ºF. Apply to ceramics, ceramic cloths, door and tadpole gaskets and metals. Excellent adhesion to steel, stainless, aluminum, lead and ceramics.

Duralco™ 4538 Epoxy Potting Compound for Encapsulating to 450ºF, Cures at Room Temperarture Encapsulate delicate electronic components for use in severe thermal shock applications.

Hi-temperature, super flexible epoxy potting compound has excellent adhesion to most plastics, metals, ceramics, glass, rubber and treated Teflon™. Seals glass ports to brass housings and withstands repeated thermal cycling from -100ºF to 300ºF without cracking.

You have challenging applications… we have solutions!

High Temperature Products Since 1971

COTRONICS CORP.

131 47th Street, Brooklyn, New York 11232 Call: 718.788.5533 Fax: 718.788.5538 Email: sales@cotronics.com

Web: www.cotronics.com

TECH SUPPORT I CUSTOM FORMULATIONS I QUANTITY PRICING

Specialized Steel Solutions for Ballistic Protection

For more than 50 years, Astralloy Steel Products has been providing innovative products for our customers.

Armor V2ÂŽ Commercial grade ballistic steel plate PREFERRED

BY THE

MILITARY

BP6:33ÂŽ Our proprietary grade of ballistic armor plate MIL-DTL-46100E A military-specified, high hardness armor steel MIL-DTL-12560K A military-specified armor steel plate

www.astralloy.com Toll-free: 1.866.587.6970 Sales: 724.230.5100 mainsales@astralloy.com AUSA Member

Astralloy Steel Products is a wholly-owned subsidiary of Nucor Corporation, the largest producer of steel in the United States.

Astralloy_Govt_Mkt_Pkg_Ad_0915_v1.indd 1

MADE IN U.S.A.

9/1/15 10:01 AM

RDM Industrial PRODUCTS, Inc. Manufacturer-Direct & Distributor for Industrial Furnishings…

www.rdm–ind.info

•Industrial-Duty •Custom & Standard Designs •Lean Manufacturing Solutions •Laboratory Tables •Packaging Workstations •Production Tables •Cleanroom Furniture •Static Control Furniture •Cleanroom Units •Mobile Carts •Material Handling

Workstations

Stainless Steel…

Manufacturer- Direct Prices !!!!

Manufacturer-Direct !!!!

Laboratory Furniture since 1977 www.rdm-ind.info 877-777-9130

Many Cart Styles…

QUALITY

•

SERVICE

•

TIMING

We also offer many furniture options, such as Seating, Carts, Shelving, Ergonomic Accessories and Much More…

Someday someone will invent a word that combines

INNOVATION, GREAT DESIGN & F L E X I B I L I T Y. For now,

WE’RE STICKING WITH CYCLONE. Thank you for making Cyclone® Mxi the #1 specified commercial water heater.

The most impressive member of the Cyclone commercial water heater family yet, the Cyclone Mxi is a model practically designed for your next project.

FEATURES: ■ Common Vent Capability ■ Modulation Combustions System ■ Up-to-98% Effi ciency ■ iCOMM ™ Remote Monitoring

16-AOS-0017 Edit Cyclone innovation Ad For PME Back Cover.indd 1

Find out how the Cyclone family can help you at www.hotwater.com/spec

1/15/16 2:00 PM