Play and Grow Junior 4ft x 4ft

JUNIOR

4’3” x 4’3”

A (mm)

B (mm)

1295

1295

Please note that this is a brand new instruction manual. If you find any mistakes or you think anything needs improving then please email me at; james@thegreenhousepeople.co.uk or phone 01782 388811

Thank you for purchasing your new Simplicity greenhouse. We recommend you familiarise yourself with the instructions and read all safety information before you commence assembly. This instruction manual is also available online at www.greenhousepeople.co.uk in our technical help section should you need to reprint it. Should you require any additional advice you can always call us on 01782 388811.

These instructions are divided into sections; B-base, partlists,1-sides, 2-front gable, 3-rear, 4-joining the four sides together, 5-roof, 6-vent, 7-door, 8-glazing(8a horticultural glass, 8b toughened glass, 8c polycarbonate glazing when available), 9-vent attachment, 10-door attachment, 11 anchoring down, back cover-packing list. If you need to contact us for assistance please refer to the relevant section/s.

Safety Warning • Glass and aluminium can potentially cause injury. Please ensure you wear protective goggles, gloves, headgear and suitable footwear when assembling and glazing the building. This building is for adult construction only!

• Please remember that glass is fragile and should be handled with extreme care. Always clear up and dispose of any breakages immediately.

• •

Do not assemble the greenhouse in high winds.

For safety reasons and ease of assembly, we recommend that this greenhouse is assembled by a minimum of two people.

Site Preparation • When selecting a site for your greenhouse, it is vital that you choose as flat and level an area as possible.

• • • •

A concrete or slabbed base will provide the most solid foundation for your greenhouse.

IMPORTANT: Do not fix your building down until the building is fully assembled, including glazing.

Avoid placing your greenhouse under trees or in other vulnerable locations.

To minimise the risk of wind damage, try to select as sheltered a site as possible, e.g. beside a hedgerow or garden fence.

Additional Considerations • Please bear in mind that assembling your greenhouse can be time consuming. You may need to spread the construction over two or more days. We recommend that you avoid leaving the building partially glazed. If you ever have to leave your greenhouse half assembled and not anchored down, weigh it down with slabs or bags of sand to stop the wind moving it.

• You will find it helpful to prepare a large, clean and clear area in which to work in. A garage floor or flat lawn area is ideal.

• • •

If you have arranged for someone to install your greenhouse for you, please check that all components are included. Most parts are numbered and can be identified by a stamp or removable label. Alternatively, the components can be identified by lengths detailed in the packing list (see diagram below).

Anchoring down your greenhouse should be the final stage of construction (including glazing).

Once installed your greenhouse requires little maintenance, but to maintain the smooth running of your door(s) WD40 or similar can be applied to the door wheels and lower door guides.

Guarantee • Your new Simplicity greenhouse is guaranteed for 10 years against faulty manufacture of the framework. This does not include glazing, moving parts, accidental damage or wind damage.

610mm

121

4’3” x 4’3”

A (mm)

B (mm)

1295

1295

OPTION 1: base on grass

OPTION 2: base on slabs

OPTION 3: base on concrete

OPTION 4: no base on brick

Page Part Ref No.

55

Section

Size (mm)

4 4

1240

2

Page Part Ref No.

57 58

49

1240

1313

1210

194

1240

4 4

Page Part Ref No.

Section

Size (mm)

4 4

131

304

6

196

1310

1

195

1310

3

129

299

2

1

2 741

2

2 85

193

Size (mm)

2

92

32

Section

628

1

2 1435

2

121

612

4

1

4 192

1202

4

59

1236

1

123

612

1 4

127

457

2 4000

60

1236

1 1

62

1216

1 2 2

30 1210

2

31 2 89 728

2

90

132

304

2

2

4

M4

6

M6

2

1

Page Part Ref No.

Section

Size (mm)

4 4

1210

12

725

10

436

2

278?

2

1415

6

100?

2

580

8

8

3 roll

53 + 79

1284

1

168

2 2

M6

95

M6

96

M6

1

10mm

32

58

4’

Part No

mm

Quantity

58

1245

2

32

1210

2

55

1245

2

49

1313

2

X2 M6

M6

55

49

6

6

32

32

49

Part No

mm

Quantity

Part No

mm

Quantity

30

1210

1

132

301

2

31

1210

1

192

1202

2

53

1284

1

193

1435

1

60

1236

1

194

1435

1

28

28

M6

1

2

90

89

53

This bar is currently riveted to the door track assembly (53).

132

192

132

194

193

192

31

30

60

90

89

89 / 90

This bar is currently riveted to the door track assembly (53).

89 / 90

132

30 / 31 192

192

193 / 194

60

60

30 / 31

193 / 194

Part No

mm

Quantity

Part No

mm

Quantity

30

1210

1

90

728

1

31

1210

1

192

1202

2

59

1236

1

193

1435

1

62

1216

1

194

1435

1

89

728

1

26

26

M6

1

2

90

89

62

192

194

193

192

31

30

59

90

89

89 / 90

193 / 194

89 / 90

30 / 31

62

62

192

192

193 / 194

59

59

30 / 31

Packed with base!

7mm

18mm

If you have a metal base and you live in a windy location then you should drill and fix the frame to the base using 10mm nuts and bolts. Drill centrally between two vertical glazing bars for neatness (it is not essential to drill every section). Make sure the bolt head does NOT interfere with the line of the glass. Cills should be drilled 18mm from the inside vertical face to avoid the front glass face. Do NOT anchor the structure to the ground until the end!

4’

Part No

mm

Quantity

57

1240

1

92

741

2

85

628

1

6

1

92 1

92

2

2

X2 M4 X 4

85

M6 10mm X 2 Part No

mm

Quantity

121

612

1

123

612

1

127

457

2

X2

X4

M4 X 2 M4 X 2

436mm X 2 610 x 457 127 X1

1000mm

121

127 121

123 610 x 457

Part No

mm

Quantity

Part No

mm

Quantity

195

1310

3

129

299

2

196

1310

1

131

304

6

M6

24

M6

24

129 129

X4

X4

131 131

X4

195

195

131 131 X2

4m

FLUFF

195

196 5.2 m

131 131

129

FLUFF

195 131

195

195

196

131

1210mm

12

725mm

10

436mm

2

278?mm

2

1415mm

6

100?mm

2

580mm

8

Size (mm)

4’

S

610 X 1210

4

R

610 x 759

3

V

610 x 457

1

U

610 x 312

1

E

295 x 610

4

1436

D

V R

P E

U

E

C D E

S

S

E

F C

F

D

1228

C

1649

1436

305

1439

610

P

305

328 114 610

1228

85

85

123

85

85

Attach upper door track 53 to the two bolts left ready in section 2 with nuts (position 53 vertically and push it through the central section between the two glaze bars. Twist 53 so that the slots in the mounting bar are facing upwards). Slide doors into upper track (53) and lower track (60), adjust the height of 53 until the door is running smoothly leaving enough room for the pane of glass above.

79 53

79

1284 Door track Support Brackets!

1

79 168

2

53

Carefully remove 2 nuts from door rear and attach door stop/ handles (see diagrams below). Re attach the nuts!

60

SAN D

No 10 x 2�

O7mm

Please note you will have to drill and screw through your metal base and into your solid foundation at an angle from outside the building.

Here’s how you can earn £25 and have your new greenhouse feature in our next brochure….

We are always interested to hear how you went on assembling your simplicity greenhouse, and we are particularly interested to see photos of the finished article.

We like to see where you’ve put it, how you’re using it and how it looks in your garden. Often we glean ideas from this which we can pass on to other gardeners as useful tips.

It is always nice if we can include ‘real’ greenhouse photos in the brochure, so if you send us a photo of your greenhouse to us and it is good enough to get into our next brochure, we will send you a £25

reward.

Please send your photos to: Photo competition Simplicity Greenhouses Blythe Park Cresswell Stoke-on-Trent Staffs ST11 9RD 01782 398600 Or better still, email us sales@simplicitygreenhouses.co.uk

on

Please write on the reverse of photos your name and address and if you would like them back, please write ‘please return’ on them too

We wish you all the best with your new greenhouse, and we look forward to seeing your photos in the near future!

To help waterproof the building it is a good idea to use a transparent all-weather silicone inside and outside of the building where there are any gaps.

Also the top of the vents can be siliconed.

Vent top corner siliconed along with bar capping.

Leave cap to allow water to drain.

Inside eave area siliconed.

Outside eave area siliconed with bar capping.

mm

4’

2

1210

12

1210

2

725

10

32

1210

2

436

2

49

1313

2

278?

2

53

1284

1

1415

6

55

1240

2

100?

2

57

1240

1

580

8

58

1240

2

59

1236

1

60

1236

1

62

1216

1

79

168

2

85

628

1

No

mm

4’

30

1210

31

No

1 4m

1 3

1- smalls pack for correct size of building 1- (4 x 4) base Including 10 base/ frame attachment plates

No

4’ 2

89

728

2

90

728

2

92

741

2

121

612

1

4

123

612

1

4

127

457

2

2

129

299

2

8

131

304

6

95

132

304

2

96

192

1202

4

1

193

1435

2

6

194

1435

2

6

195

1310

3

2

196

1310

1

2

4 4