Highway & Airport Paving Equipment
Concrete Batching & Mixing Plants
Canal Construction Equipment
Eagle Trenchers High Production Bucket Wheel Trenchers
Trenching Equipment
EAGLE TRENCHERS HIGH PRODUCTION TRENCHERS Guntert & Zimmerman is committed to manufacturing the highest quality bucket wheel trenchers to increase productivity, lower operating costs, and ensure ease of operation. Eagle Trenchers are an excellent choice for a wide variety of high production trenching applications, such as foundations, utilities, irrigation, and fiber optic installations. Eagle Trenchers are built rugged enough for the toughest jobs and when the job is done...a clean superior end product is left behind. Along with Bucket Wheel Trenchers for trenching applications, G&Z builds Trapezoidal Trenchers for excavating and trimming small to medium size canals at high production rates in a single pass. Trapezoidal Trenchers eliminate the need to use a conventional excavator for the initial rough excavation in preparation for trimming because of its combination excavator and trimmer design. Years of field and manufacturing experience and incorporating the latest available technology make Eagle Trenchers the obvious choice for boosting jobsite trenching productivity and profitability.
Eagle 4500 // Foundation Trencher Digging Depth: 4 ft. (1.21 m) // Digging Width: 14 to 24 in. (355 - 610 mm)
Standard Features • Engine: US Federal Tier 3/European Stage IIIA direct electronic fuel injection, turbocharged and aftercooled, 4-cylinder Diesel Engine, approximately 113 HP (84 kW) • Conveyor: Reversible Hydraulic Drive for either right or left discharge, 24 in. (610 mm) wide x approximately 7 ft. (2134 mm) long, center to center, rated @ 0-1000 fpm (0-305 mpm). • Digging Drive: Hydraulic Motor Driven Gear Box with Integral Flywheel mounted directly to the No. 1 Head Shaft. • Undercarriage: G&Z D-3 size Crawlers, SALT Chain with Split Master Link. High reduction planetary gear boxes. Undercarriage mounted directly to the tractor body. • Hydraulic Conveyor Shift Mechanism. • Hydraulic Conveyor Mechanism Shift • Hydraulic Roll Up Crumb Shoe • Roll Over Protection System (ROPS) • .625 in. (16 mm) Rims and Buckets, foundation style • Dozer Blade • Berm Scraper • Back-Up Alarm • Weight: Estimated 22,500 lbs. (10,206 kg)
Eagle 4500 Rear View
15° Optional Self-Leveling Undercarriage 14" (356 mm) Standard Digging Width Optional to 24" (610 mm) Digging Width
Eagle 4500 Side View 22'-6" (6850 mm) 8'-2" (2490 mm)
Optional Features EAGLE
• • • •
Self-Level Control Carbide Teeth 15 - 24 in. (381 - 610 mm) Side Cutter Sets Narrow Bucket Wheel Kit to maintain full depth 12 in. (305 mm) trench width
4 5 0 0
24" (610 mm)
4" (102 mm) Minimum Cut 4'-0" (1219 mm)* Maximum Cut
*9 in. (228 mm) of digging depth is lost when using Berm Scrapers
8'-9" (2660 mm)
Eagle 5500 // Foundation Trencher Digging Depth: 5 ft. (1.52 m) // Digging Width: 14 to 24 in. (355 - 610 mm)
Standard Features • Engine: US EPA Tier 3/European Stage IIIA direct electronic fuel injection, turbocharged and aftercooled, 4-cylinder Diesel Engine, approximately 113 HP (84 kW) • Conveyor: Reversible Hydraulic Drive for either right or left discharge, 24 in. (610 mm) wide x approximately 7 ft. (2134 mm) long, center to center, rated @ 0-1000 fpm (0-305 mpm). • Digging Drive: Hydraulic Motor Driven Gear Box with Integral Flywheel mounted directly to the No. 1 Head Shaft. • Undercarriage: G&Z D-3 size Crawlers, SALT Chain with Split Master Link. High reduction planetary gear boxes. Undercarriage mounted directly to the tractor body. • Hydraulic Conveyor Shift Mechanism. • Hydraulic Conveyor Mechanism Shift • Hydraulic Roll Up Crumb Shoe • Roll Over Protection System (ROPS) • .625 in. (16 mm) Rims and Buckets, foundation style • Dozer Blade • Berm Scrapers • Back-Up Alarm • Weight: Estimated 24,500 lbs. (11,113 kg)
Optional Features • • • •
Self-Level Control Carbide Teeth 15 - 24 in. (381 - 610 mm) Side Cutter Sets Narrow Bucket Wheel Kit to maintain full depth 12 in. (305 mm) trench width
Eagle 5500 Rear View
15° Optional Self-Leveling Undercarriage 14” (356 mm) Standard Digging Width Optional to 24” (610 mm) Digging Width
Eagle 5500 Side View 25'-0" (7620 mm)
8'-9" (2660 mm)
Ø 9'-4" (Ø 2840 mm)
EAGLE
5 5 0 0
4" (102 mm) Minimum Cut 5'-0" (1,524 mm)* Maximum Cut
24" (610 mm)
*9 in. (228mm) of digging depth is lost when using Berm Scrapers
Eagle 4600 // Side Shift Trencher Digging Depth: 4 ft. (1.21 m) // Digging Width: 12 to 24 in. (305 - 610 mm)
Standard Features
Eagle 4600 Rear View (Wheel shifted to side)
• E ngine: US EPA Tier 3/European Stage IIIA direct electronic fuel injection, turbocharged and aftercooled, 6-cylinder Diesel Engine, approximately 175 HP (130 kW) . • Conveyor: Reversible Hydraulic Drive for either right or left discharge, 24 in. (610 mm) wide x approximately 7 ft. (2134 mm) long, center to center, rated @ 0-1000 fpm (0-305 mpm). • Digging Drive: Hydraulic Motor Driven Gear Box with Integral Flywheel mounted directly to the No. 1 Head Shaft. • Undercarriage: D-4 size Crawlers, SALT Chain with Split Master Link. High reduction planetary gear boxes. Undercarriage mounted to a separate, solid subframe, and center pin connected to the tractor body. Machine equipped with hydraulic cylinder self-level control for 15° maximum angle. • Speed Range: Working Speed 0 – 30 fpm (0 – 9.14 mpm), Travel Speed 0 – 200 fpm (0 – 61 mpm). • Hydraulic Conveyor Shift Mechanism. • Hydraulic Roll-up Crumb Shoe. • Roll Over Protection System (ROPS) • Weight: Estimated 35,000 lbs (15,837 kg)
Optional Features
Self-Leveling Undercarriage 15° 12" (305 mm) Minimum Cut 24" (610 mm) Maximum Cut
76" (1.9 m)
Eagle 4600 Side View
10'-9" (3280 mm) EAGLE
• • • •
Self-Level Control Carbide Teeth 15 - 24 in. (381 - 610 mm) Side Cutter Sets Narrow Bucket Wheel Kit to maintain full depth 12 in. (305 mm) trench width • Front Pass Conveyor with separate pivoting Stinger Belt, 24 in. (610 mm) wide belts and supports to load out dump trucks. Maximum digging depth is reduced by 12 in. (305 mm) when optional Front Pass Conveyor is used
4 6 0 0
4" (101 mm) Minimum Cut 4'-0" (1219 mm) Maximum Cut
25'-11" (7900 mm)
Eagle 6500 // Pipeline & Utility Trencher Digging Depth: 6 ft. (1.83 m) // Digging Width: 18 to 30 in. (457 - 762 mm)
Eagle 6500 Rear View
Standard Features • E ngine: US EPA Tier 3/European Stage IIIA direct electronic fuel injection, turbocharged and aftercooled, 6-cylinder Diesel Engine, approximately 175 HP (130 kW) @ 2100 RPM, Continuous Rating. • Conveyor: Reversible Hydraulic Drive for either right or left discharge, 24 in. (610 mm) wide x approximately 7 ft.(2134mm) long, center to center, rated @ 0-1000 fpm (0-305 mpm) • Digging Drive: Heavy Duty, Hydraulic Motor Driven Wheel Drive Gear Reducer with Integral Flywheel mounted directly to the Head Shaft • Undercarriage: G&Z D-4 size Crawlers, SALT Chain with Split Master Link. High Reduction Planetary gear boxes. Undercarriage mounted directly to the tractor body. • Speed Range: Working Speed 0 - 30 fpm (0 - 9.14 mpm), Travel Speed 0 - 200 fpm (0 - 61 mpm) • Hydraulic Conveyor Shift Mechanism. • Hydraulic Conveyor Mechanism Shift • Hydraulic Roll Up Crumb Shoe • Roll Over Protection System (ROPS) • 1 in. (25.4 mm) Rims & Buckets, 24 in. (610 mm) Cut • Weight: Approximately 34,000 lbs (15,385 kg)
Optional Features • • • • •
Self Level Control/Self Leveling Undercarriage Round conical Carbide Teeth Enclosed Operator Cab - Heated and Air Conditioned Fixed Crumb Shoe Additional Buckets for different trench widths up to maximum 30 in. (762 mm) • Narrow Bucket Wheel Kit to maintain full depth 18 in. (457 mm) trench width
15° Optional Self-Leveling Undercarriage 24" (610 mm) Standard Digging Width Optional 18" (457mm) to 30" (762 mm) Digging Width 6'-2" (1880mm)
Eagle 6500 Side View 27'-1" (8260mm)
9'-4" (2850mm) EAGLE 6 5 0 0
9" (229 mm) Minimum Digging Depth 6' -0" (1829 mm) Maximum Digging Depth
Eagle 6600 // Side Shift Trencher Digging Depth: 6 ft. (1.83 m) // Digging Width: 18 to 30 in. (457 - 762 mm)
Standard Features
Eagle 6600 Rear View (Wheel shifted to side)
• E ngine: US EPA Tier 3/European Stage IIIA direct electronic fuel injection, turbocharged and aftercooled, 6-cylinder Diesel Engine, approximately 175 HP (130 kW) @ 2100 RPM, Continuous Rating. Cooling: Special combination engine radiator, heat exchanger, intercooler mounted in front of the engine with pusher fan • Conveyor: Reversible Hydraulic Drive for either right or left discharge, 24 in. (610 mm) wide x approximately 7 ft. (2134 mm) long center to center (long enough to reach the Front Pass Conveyor) with belt skirting rated @ 1000 fpm (305 mpm). Shipping Width 8 ft. (2438 mm). • Digging Drive: Hydraulic Motor Driven Gear Box with Integral Flywheel mounted directly to the No. 1 Head Shaft. • Undercarriage: G&Z D-4 size Crawlers, 16 in. (406 mm) triple grouser pads, 8 bottom rollers, 2 top carrier rollers, SALT Chain with Split Master Link, Rock Guards, spring loaded, grease gun type front idler assemblies. Machine equipped with hydraulic cylinder self-level control. • Speed Range : Working Speed 0 – 30 fpm (0 – 9.14 mpm), Travel Speed 0 – 200 fpm (0 – 61 mpm) • Approximate Weight: Estimated 44,000 lbs (19,909 kg)
Optional Features • 14 in. (356 mm) Narrow Bucket Wheel Kit • Carbide Teeth • Front Pass Conveyor with 24 in. (610 mm) wide belt and supports and separate stinger belt to load out dump trucks • Wide triple grousers • Side Cutter Sets
18" (460 mm) Minimum Cut 30” (762) Maximum Cut
76" (1900 mm)
Eagle 6600 Side View 30'-6" (9285 mm)
9'-4" (2850 mm)
1’-1” (330 mm) Minimum Digging Depth 6’ (1800 mm) Maximum Digging Depth
Eagle 7500 // Pipeline & Utility Trencher Digging Depth: 7 ft. (2.13 m) // Digging Width: 22 to 40 in. (559 - 1016 mm)
Eagle 7500 Rear View
Standard Features • E ngine: US EPA Tier 3/European Stage IIIA direct electronic fuel injection, turbocharged and aftercooled, 6-cylinder Diesel Engine, approximately 275 HP (205 kW) @ 2100 RPM • Conveyor: 30” (762 mm) wide x 8’-10” (2692 mm) long c to c with belt skirting rated @ 1000 fpm (305 mpm). • Digging Drive: - Two Hydraulic Motor Driven Gear Boxes with Integral Flywheel mounted direct to No. 1 Head Shaft • Undercarriage: G&Z D-4 size Crawlers / 20 in. (508 mm) wide triple grousers, SALT Chain with Split Master Link, Rock Guards. Undercarriage mounted directly to tractor body. • Bucket wheel assembly is connected to the main body of the trencher via pivot arms and the center pull, articulated mast. • Speed: Working speed approx. 0 - 30 fpm (0 – 9 mpm) and Travel speed approx. 0 - 200 fpm (0 - 61 mpm). • Hydraulic Conveyor Shift Mechanism. • Fixed Crumb Shoe • Roll Over Protection System (ROPS) • 1 in. (25 mm) Rims and Buckets, foundation style • Weight: Estimated 50,000 lbs (22,679 kg)
15° Optional Self-Leveling Undercarriage 8' (2438mm) 22" (559 mm) Minimum Digging Width 40" (1016 mm) Maximum Digging Width Shipping Width 8'-6" (2590 mm)
Eagle 7500 Side View
Optional Features • • • • • •
Conical carbide teeth with holders Roll-up Crumb Shoe, hydraulically powered Automatic Steering and Grade Control System Automatic Cross-Level System Conveyor Extensions - 2’ (610 mm) or 4’ (1220 mm) Additional Buckets and Bucket Backs for different trench widths up to maximum 40 in. (1,016 mm) • Air Conditioned and Heated, Enclosed ROPS Cab.
32'-4" (9850 mm)
10'-6" (3250 mm) EAGLE 7 5 0 0
1'-6" (457 mm) Minimum Digging Depth 7' (2133 mm) Maximum Digging Depth
Eagle 8500 // Pipeline & Utility Trencher Digging Depth: 3 to 8 ft. (0.91 - 2.43 m) // Digging Width: 30 to 48 in. (762 - 1220 mm)
Standard Features • E ngine: US EPA Tier 3/European Stage IIIA direct electronic fuel injection, turbocharged and aftercooled, 6-cylinder Diesel Engine, approximately 350 HP (261 kW) Interm. Rating @ 2100 RPM. • Hydraulic Conveyor: 36 in. (914 mm) wide x 12 ft.-5 in. (3780 mm) long c to c with belt skirting rated @ 1000 fpm (305 mpm). • Digging Drive: - Two Hydraulic Motor Driven Gear Boxes with Integral Flywheel mounted direct to No. 1 Head Shaft • Undercarriage: G&Z D-5 size Crawlers / 20 in. (508 mm) wide triple grousers, SALT Chain with Split Master Link, Rock Guards. Undercarriage mounted directly to tractor body. • Bucket wheel assembly is connected to the main body of the trencher via pivot arms and the center pull, articulated mast. • Hydraulic Conveyor Shift Mechanism. • Hydraulic Roll Up Crumb Shoe • Roll Over Protection System (ROPS) • 1 1/4” (32 mm) Rims and Buckets, foundation style • Approximate Weight: 75,000 - 80,000 lbs (33,937 - 36,199 kg)
Optional Features • Conical carbide teeth with holders • Roll-up Crumb Shoe, hydraulically powered • Automatic Steering and Grade Control System • Automatic Cross-Level System • Conveyor Extensions - 2’ (610 mm) or 4’ (1220 mm) • Additional Buckets and Bucket Backs for different trench widths up to maximum 48 in. (1219 mm) • Air Conditioned and Heated, Enclosed ROPS Cab.
Eagle 8500 Rear View (Wheel shifted to side) 10’ (3050 mm)
30" (762 mm) Minimum Cut 48" (1219 mm) Maximum Cut
Eagle 8500 Side View 37'-10" (11530 mm)
10'-8" (3250 mm)
3' (914 mm) Minimum Digging Depth 8' (2438 mm) Maximum Digging Depth
Eagle 6300 // Trapezoidal Trencher Digging Depth: 1 to 3.5 ft. (305 - 1067 mm) // Bottom Width: 1 to 4 ft. (305 - 1219 mm)
Standard Features • E ngine: US EPA Tier 3/European Stage IIIA direct electronic fuel injection, turbocharged and aftercooled, 6-cylinder Diesel Engine, approximately 175 HP (130kW) Interm Rating @ 2100 RPM • Conveyor: Reversible Hydraulic Drive for either right or left discharge, 36 in. (914 mm) wide. The conveyor length is custom made to fit your application and is rated @ 0-1000 fpm (0-305 mpm) • Digging Drive: No. 1 Shaft mounted gear reduction box, flywheel type with hydraulic motor drive. Split sprocket with hub drives wheel rims off segments. • Undercarriage: G&Z D-4 size Crawlers, sealed chain with Split Master Link. Heavy Duty Planetary gear reduction boxes. Automatic cross-level control of undercarriage. Pivoting structure between Trencher Body and undercarriage frame with manual or automatic hydraulic cylinder control to accommodate minor variations in the berm cross slope grade. • Speed: Working speed approx. 0 - 30 fpm (0 – 9 mpm) and Travel speed approx. 0 - 200 fpm (0 - 61 mpm). • Slopes Possible: 1:1, 1¼ :1 and 1½:1 as ordered. Some limitations may apply. Consults G&Z factory regarding your needs • Operating Weight (Approx.): 55,000 lbs. (24,887 kg)
Eagle 6300 Front View
9’-10” (3000 mm) Transport Height
1’-4” (410 mm) Track Pads 7’-8” (2340 mm) Transport Width
Eagle 6300 Side View 28’-8”(874 mm)
Optional Features • • • •
Operator Cabin - Heated and Air Conditioned Utility/Pipeline trencher conversion kit Laser Control Equipment Additional buckets, rotaries, and crumbshoes for different canal cross sections. Consult with factory. • Laser Elevation and Steering Kit giving Trencher grade, cross slope, and steering control reference from a Laser beam(s). No grade wire required. Grade wire required in curves for steering.
15°
2’-4” (710 mm)
Eagle 7300 // Trapezoidal Trencher Digging Depth: 2 to 7 ft. (500 - 2130 mm) // Bottom Width: 1.5 to 8.5 ft. (457 - 2590 mm)
Standard Features • E ngine: US EPA Tier 3/European Stage IIIA direct electronic fuel injection, turbocharged and aftercooled, 6-cylinder Diesel Engine, approximately 350 HP (261 kW) Interm. Rating @ 2100 RPM. • Conveyor: Reversible Hydraulic Drive for either right or left discharge, 42 in. (1066 mm) wide. The conveyor length is custom made to fit your application and is rated @ 0-1000 fpm (0-305 mpm) • Digging Drive: - No. 1 Shaft mounted gear reduction boxes, flywheel type with hydraulic motor drives. Split sprocket with hub drives wheel rims off segments. • Undercarriage: G&Z D-5 size Crawlers, sealed chain with Split Master Link. Heavy Duty Planetary gear reduction boxes. Automatic cross-level control of undercarriage. Pivoting structure between Trencher Body and undercarriage frame with manual or automatic hydraulic cylinder control to accommodate minor variations in the berm cross slope grade. • Speed: Working speed approx. 0 - 120 fpm (0 – 36 mpm) and Travel speed approx. 0 - 2.2 mph (0 - 3.5 kph). • Slopes Possible: 1:1, 1¼ :1 and 1½:1 as ordered. Some limitations may apply. Consults G&Z factory regarding your needs • Operating Weight (Approx.): 77,500 lbs. (35,153 kg)
Eagle 7300 Front View
10.66’ (3250 mm) Transport Height
2’ (610 mm) Track Pads 10’ (3050 mm) Transport Width
Eagle 7300 Side View 34.16’ (10410 mm)
Optional Features • • • •
Operator Cabin - Heated and Air Conditioned Utility/Pipeline trencher conversion kit Laser Control Equipment Additional buckets, rotaries, and crumbshoes for different canal cross sections. Consult with factory. • Laser Elevation and Steering Kit giving Trencher grade, cross slope, and steering control reference from a Laser beam(s). No grade wire required. Grade wire required in curves for steering.
15°
2.5’ (760 mm)
Guntert & Zimmerman Const. Div., Inc. 222 E. Fourth St. Ripon, CA 95366 U.S.A. Phone +1 209-599-0066 Fax +1 209-599-2021 Toll Free 800-733-2912 (USA / Canada) Email: gz@guntert.com Web: www.guntert.com
Manufactured under one or more of the following U.S. or Foreign Patents: 4,433,936; 4,483,584; 0051885; 6,390,727; 6,390,726; 6,176,643B1; 5,135.333 and 117323 and Patents Pending. Some items shown may be optional. G&Z reserves the right to make improvements in design, material, and/or changes in specifications at any time without notice and without incurring any obligation related to such changes. Brochure No. 400P108