Catálogo Scranton Instalación

Page 1


Table of Contents General Information |

WELCOME TO SCRANTON PRODUCTS®

Table of Contents

General Information

Vanities

• Welcome to Scranton Products • Care & Maintenance • Warranty Information • MSDS Information

Sustainability

• Are Scranton Products materials Sustainable? • Greenguard Certified Products • Leed Information

Accredited Classes Architectural

Toilet Compartments & Screens

Hiny Hider Partitions • Case Study • Specifications & Drawings • Floor Mounted Overhead Braced - Specifications - Drawings • Floor to ceiling - Specifications - Drawings • Ceiling Hung - Specifications - Drawings • Hiny Hider Urinal Screens - Specifications - Drawings • Hiny Hider Hardware - Hinges - Drawings - Brackets - Drawings - Shoes - Drawings - Headrails - Drawings - Door hardware - Drawings • Hiny Hider fire rating information

Resistall Partitions • Case study • Specifications

• Specifications & Drawings • Specifications • Drawings

Shower & Dressing Compartments

• Specifications & Drawings • Specifications • Drawings

Lockers

Tufftec Lockers • Case Study • Specifications • Drawings

Tufftec Benches • Specifications • Drawings Duralife Lockers • Case study • Specifications • Drawings • Fire rating information

Contact Information

PDF versions of our product brochures and information on AIA courses can be found in separate folders on this flash drive.

TM


General Information

Designed to be worry free

GENERAL INFORMATION • Industry leader • Maintenance free solutions • American made • Sustainable


Welcome to Scranton Products

WELCOME TO SCRANTON PRODUCTS®

Together the brands of Scranton Products® offer the most comprehensive and trusted line of innovative products that add functional and aesthetic value, superior performance, durability, minimal maintenance, lower life cycle cost and sustainability. For more than 30 years, our American made premium brands have led the market, setting new benchmarks for the industry in quality and innovation. Our well-known brands include; Hiny Hider® Toilet Partitions, Tufftec Lockers®, Resistall® Partitions, and Duralife LockersTM. They won’t dent, rust or need painting, and because they are color throughout, delamination is not factor. Specify and install Scranton Products® brands with confidence – the most recognized and trusted names in locker systems, bathroom partitions, counter tops, shower stalls and more. Please note that we will automatically send periodic updates to our architectural binder. In order to guarantee that you receive them, we ask that you submit any change to your contact information such as mailing address and e-mail address by contacting us at info@scrantonproducts.com. You may also contact us through our website or toll-free number for more comprehensive information on our product lines and specifications, or to request a complete color sample kit at www.scrantonrpoducts.com, or 800.445.5148.

TM


Scranton Products Limited Warranty

SCRANTON PRODUCTS® LIMITED WARRANTY

Scranton Products’ Hiny Hider® Partitions, Resistall Partitions®, Tufftec Lockers®, Tufftec™ benches, Duralife Lockers™, Scranton Products® brand shower stalls, dressing compartments and vanities, including products sold under the company names (Santana©, Comtec©, Capitol©) (hereinafter “warranted products”) are warranted by the manufacturer to a corporation or other commercial entity which purchases the partitions and lockers for use in the conduct of its business to be free from defects in material and workmanship that (i) occur as a direct result of the manufacturing process; (ii) occur under normal use and service; (iii) occur during the warranty period; and (iv) result in breakage or delamination. Limited warranty periods are as follows: Lockers/Benches Tufftec Lockers ® Tufftec TM Benches Duralife Lockers TM

25 years 25 years 15 years

Bathroom Partitions Hiny Hiders ® Bathroom Partitions Resistall ® Bathroom Partitions

25 years 5 years

Shower Stalls/Vanities/Dressing Compartments Scranton Products ® Shower Stalls Scranton Products ® Vanities Scranton Products ® Dressing Compartments

25 years 25 years 25 years

This limited warranty is subject to the following conditions: 1. The warranted products have been installed in accordance with the manufacturer’s written instructions and drawings (as contained in the instruction sheet supplied with the order). 2. The limited warranty is effective only with regard to the original installation of the warranted products and not to any subsequent installation that has altered the warranted product without the consent of the manufacturer. 3. The limited warranty shall not be applicable if the defect in the warranted product has resulted from any failure or defect in the building or substructure to which the warranted product is attached (including but not limited to settling, shifting, distorting, or movement of the walls or foundation of the structure), extraordinary wear and tear, violent action of the elements (such as sunlight, lightening, hurricane, tornado, or hail), vandalism, misuse, neglect, or improper handling of the warranted product, during or after installation, or improper or insufficient ventilation of the building to which the warranted product is attached.

TM


SCRANTON PRODUCTS® LIMITED WARRANTY

Subject to the above conditions, in the event that the warranted product or any portion thereof, is found to be defective in workmanship or materials within limited warranty period from the date of receipt by customer, the Manufacturer will repair or replace the defective material, or will refund the original purchase price of the defective material. The choice of remedy is in Manufacturer’s sole discretion. The Manufacturer will not be liable for labor and/or removal costs connected with the claim. Replacement product will be provided as close to the original color and design as possible, although it is not guaranteed to match completely. In the event of repair or replacement, the original limited warranty shall apply to the repaired or replaced portion of the warranted products and will extend for the balance of the warranty period in effect at the time the material proved defective. THE WARRANTY STATEMENTS CONTAINED IN THIS LIMITED WARRANTY SET FORTH THE ONLY WARRANTIES EXTENDED BY SCRANTON PRODUCTS AND ARE IN LIEU OF ALL OTHER CONDITIONS AND WARRANTIES, EITHER EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE PROVISIONS OF THIS WARRANTY SHALL CONSTITUTE THE ENTIRE LIABILITY OF SCRANTON PRODUCTS AND THE PURCHASER/PROPERTY OWNER’S EXCLUSIVE REMEDY FOR BREACH OF THIS WARRANTY. IN NO EVENT SHALL SCRANTON PRODUCTS BE LIABLE TO THE PURCHASER/PROPERTY OWNER FOR SPECIAL, INCIDENTAL, INDIRECT, CONSEQUENTIAL, OR PUNITIVE DAMAGES ARISING FROM THE USE OF THE WARRANTED PRODUCTS OR THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY. The laws of some states and provinces do not allow the exclusion, limitation or variation of certain conditions or warranties implied by legislation so the above limitations or exclusions may not apply to you. This Limited Warranty gives you specific legal rights and you may also have other rights that vary from state to state and province to province. Any claim under such warranties must be made during the applicable warranty period and shall be asserted by contacting: Scranton Products®, (Santana/Comtec/Capitol) 801 E. Corey Street-Scranton, PA 18505-Phone# 800-445-5148-Fax# 800-551-6993.

TM


Care & Maintenance

WORRY FREE MAINTENANCE Keeping your plastic lockers and partitions beautiful for years is easy! Here’s how DIRT and GRAFFITI Your Scranton Products plastic products can be cleaned satisfactorily by using water and a mild cleaner. Avoid using any abrasive cleaner, brush or other item that could scratch the surface. When the soiled areas are stubborn, the following cleaning solutions are suggested: - ½ cup of household detergent, 2/3 cup of trisodium phosphate, and 1 gallon of water - Any industrial strength cleaner (Non-abrasive) - For glue that sticks from the masking use Mineral spirits or Acetone. Avoid contact with the hardware. CUT and SCRATCHES Repair cuts and scratches by burnishing the surface with a smooth round object, such as a spoon or screwdriver handle. Using the smooth round object, apply light pressure to the cut or scratched surface rubbing it until it begins to heal. NOTE: Spray the surface of the panels and doors with silicone to give them a like new bright and glossy appearance.


Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET PETROTHENE LM600700

1. Product and Company Identification Product name: Petrothene LM60070 Number: 000000000000504270 Chemical characterization: Polyolefin CAS-No.: 9002-88-4 Chemical name: Polyethylene Homopolymer Synonyms: Polyethylene, PE, Polyolefin Use category: Resins

Company Address:

Equistar Chemicals, LP LyondellBasell Tower, Suite 700 1221 McKinney St. P.O. Box 2583 Houston, TX 77252-2583

Company Telephone:

Customer Service 888 777-0232 Product Safety 800 700-0946 product.safety@lyondellbasell.com

Emergency Telephone

CHEMTREC USA 800-424-9300 EQUISTAR 800-245-4532

2. Hazards Identification

Emergency Overview

This material is NOT HAZARDOUS by OSHA Hazard Communication definition. Trade secret chemical identities will be revealed to treating physicians in an emergency, or to purchasers after execution of a secrecy agreement.

Signal Word

Caution

NFPA速

HMIS速

Physical State Solid

Color

Translucent to white

Health Flammability Physical Hazard

1 0

0 1 0

0

Odor

Faint, mild hydrocarbon odor

Odor Threshold No value available

TM


MATERIAL SAFETY DATA SHEET PETROTHENE LM600700

3. Potential Health Effects Routes of Exposure Eye. Inhalation. Skin

• Polyethylene Homopolymer 9002-88-4 Hot material may cause thermal burns. At process temperature, irritating fumes may cause soreness in the nose and throat; coughing may result. Mechanical irritation possible. • Additives No known acute health effects

Skin

Molten polymer may cause thermal burns.

Inhalation

At process temperatures irritating fumes may be produced. Inhalation of process fumes and vapors may cause soreness in the nose and throat and coughing “Nuisance dust” such as polymer dust typically exhibit no significant health effect when they are reasonably controlled. Exposure to high concentrations of dust may cause slight irritation by mechanical action.

Eyes

Mechanical irritation is possible

Ingestion

Ingestion not likely route of exposure

Chronic Effects

No known chronic health effects • Polyethylene, Homopolymer 9002-88-4 No known chronic health effects. • Additives No known chronic health effects

TM


Sustainability

Recycle–Reclaim–Reuse

SUSTAINABILITY • Made from recycled materials • Contains 25-100% pre-consumer content • 100% recyclable • 100% post consumer material content available


Are Scranton Products Sustainable

RECYCLE • RECLAIM • REUSE • Made from recycled materials • Contains 25-100% pre-consumer content • Factory responsible recycling • 100% recyclable


SUSTAINABLE MATERIALS When you choose Scranton Products sustainable materials for your restrooms, lockers and other applications, you are supporting a healthier environment. Scranton Products High Density Polyethylene (HDPE) reduces environmental impact and offers both initial and long-term improvements to the indoor air quality of your projects: • Made from recycled materials • 100% recyclable • Contains 25-100% pre-consumer content • GREEN-GUARD Children and Schools Certified SM • No painting means no VOC emissions • Improved air quality • Impermeable to moisture • Resists mold, mildew and fungus • Resistant to bacteria • Power-washable and steam cleanable • No need for harmful chemical cleaners • Decreased noise pollution • Factory responsible recycling Incorporating Scranton Products HDPE sustainable materials can contribute points toward LEED certification.


Greenguard Certified Products

The GREENGUARD Certification Program helps manufacturers create--and helps buyers identify--interior products and materials that have low chemical emissions, improving the quality of the air in which the products are used.

When you choose Scranton Products you are supporting a healthier environment and healthier kids, Greenguard Children and Schools certified, Scranton Products meet strict criteria for products intended for use in schools and other environments where children spend significant periods of time. In addition, because they never need painting, they do not contribute to VOC emissions, improving both indoor and outdoor air quality. They are also impermeable to moisture, resist mold and mildew, and can be power washed or steam cleaned, eliminating the need for harmful chemical cleaners. Incorporating Scranton Products can contribute to points toward LEED certification. Below are some facts about the program For products intended for use in schools, daycares or other environments where children spend significant periods of time, the GREENGUARD Children & Schools Certification ProgramSM offers stricter certification criteria . It is referenced by both The Collaborative for High Performance Schools (CHPS) and the Leadership in Energy and Environmental Design (LEED) Building Rating System. Products certified to this standard are also suitable for use in environments where children and others work, play or reside. Body Burden Correction Factor Children are more sensitive to environmental exposures than adults. Their bodies are still developing including their brains. They breathe faster than adults and in return receive a higher dose of indoor pollution per body weight. To account for inhalation exposure to young children, a body burden correction factor has been applied to the current GREENGUARD Indoor Air Quality Certified ® allowable levels. To achieve GREENGUARD Children & Schools Certification, these lower allowable emissions criteria must be met along with additional chemical criteria as discussed below. Chronic Reference Exposure Levels (CRELs) The exposure to individual volatile organic compounds (VOCs), as detected in the C 6 - C16 mass spectrometric analysis screen, has been adjusted to allow no greater than 1/100 of the currently published ACGIH® Threshold Limit Values (TLVs) and no greater than one-half of the California's Chronic Reference Exposure Levels (CRELs). In many cases, the 1/100 safety factor reduction of TLVs results in the most stringent requirements for an extensive range of VOCs. A total VOC or TVOC maximum allowable limit takes into account the complex mixture of all VOCs found to be emitting from a product, including those with and without TLVs or CRELs. Limits on Phthalates Limits on emissions of total phthalates, consisting of dibutyl (DBP), diethylhexyl (DEHP), diethyl (DEP), dimethyl (DMP), butylbenzyl (BBP) and dioctyl (DOP) phthalates, have been added to the list of requirements for GREENGUARD Children & Schools Certification. Results from recent research indicate that inhalation is an important route of exposure to phthalates and that these chemicals have been associated with endocrine disorders, reproductive and developmental disorders, asthma and allergies. Emission Controls for Educational and Healthcare Environments This standard is designed to define low-emitting materials suitable for environments where people, particularly children and sensitive adults, spend extended periods of time, in particular schools and healthcare facilities.

www.scrantonproducts.com — 800.445.5148 — info@scrantonproducts.com


Leed Information

Several years ago Scranton Products established programs to recycle production scrap and waste. Today Scranton Products is pleased to join the efforts of the U. S. Green Building Council and LEED program to improve the environmental and economic performance of commercial construction projects.

The LEED program certifies buildings that meet standards utilizing energy and environmental design. The use of Scranton Products’ solid HDPE plastic products can contribute LEED points in specific categories. Construction Waste Management-Salvage/Recycle 50% or 75%; MR Credit 2.1 and 2.2; 1 – 2 points credit Scranton Products offers a program by which all unwanted solid HDPE plastic products they manufacture could be returned for recycling. Recycled Content MR Credit 4.1 and 4.2 1 – 2 points credit Scranton Products offers products of 100% *Post Consumer Recycled HDPE solid plastic in a variety of colors, and standard HDPE solid plastic products of 25% - 75% *post industrial recycled HDPE. Local, Regional Material MR Credit 5.1 and 5.2 1 – 2 points credit Scranton Products, fabricates products in Scranton, PA 18505 The standard color pallet for the 100% post consumer partition products includes: PC 00 Grey, PC 02 Desert Beige, PC 05 Midnight Black and PC BB01 Blueberry. Matching shoes and brackets are available for these color selections providing a uniform design presentation. Scranton Products can also offer 100% *post consumer partitions in custom colors on projects of approximately 40 stalls or more. VOLATILE ORGANIC COMPOUNDS (VOCs) Scranton Products solid toilet partitions and lockers do not emit volatile organic compounds (VOCs). UREA FORMALDEHYDE Scranton Products solid toilet partitions and lockers do not contain urea formaldehyde. *Post-consumer material is defined as waste material generated by households or by commercial, industrial and institutional facilities in their role as end-users of the product, which can no longer be used for its intended purpose. *Pre-consumer material (also referred to as post-industrial material) is defined as material diverted from the waste stream during the manufacturing process. Reutilization of materials (i.e., rework, regrind or scrap generated in a process and capable of being reclaimed within the same process that generated it) is excluded.

www.scrantonproducts.com — 800.445.5148 — info@scrantonproducts.com


AIA Courses

Providing valuable continuing education credits

AIA COURSES • Lunch & Learn programs • Online programs • Webinars • Self administered programs

PDF versions of our AIA courses can be found in separate folders on this flash drive.


Toilet Compartments & Screens

The possiblities are limitless

TOILET COMPARTMENTS & SCREENS • Maintenance Free • Impact & Dent Resistant • Graffiti Resistant • Will never rust, corrode or delaminate


Hiny Hiders Toilet Partitions

HINY HIDERS® TOILET PARTITIONS One investment many benefits • 1” solid plastic • Wide array of colors & textures • Customizable • Most durable material choice


Hiny Hider Case Study

CASE STUDY

OKLAHOMA STATE UNIVERSITY

In a sports stadium, there are fewer high-traffic areas than the restroom facilities. Oklahoma State University’s historic stadium was built in 1913 so the restroom facilities had suffered a great deal of wear and tear from continued use over the years. So when the University planned to renovate and expand its stadium, it was an opportunity to upgrade the restrooms with new bathroom partitions that would add functional and aesthetic value, and endure the high volume of traffic.

Oklahoma State University Hiny Hiders Bathroom Partitions

“Durability was of utmost importance when selecting a product for this application,” said David Reed, Sparks Reed Architecture & Interiors, project architect for the OSU installation. “But due to the nature of the application we also wanted a product that would be low maintenance, and resistant to abuse. It’s common knowledge that public bathroom facilities, particularly the stalls, are subjected to vandalism including scratches and dents and graffiti from rival or rowdy fans. We did our research and specified Scranton Products’ Hiny Hiders® for the application.” Hiny Hiders are made from premium, American-made one-inch thick solid HDPE. The solid plastic partitions resist dents, scratches, corrosion, bacteria, graffiti, and mildew, and unlike traditional metal partitions, they’ll never rust. With the number of partitions required in the installation it was a challenge to find the material that would last. Solid plastic will not break, and it never needs to be painted.

www.scrantonproducts.com ● 800.445.5148 ● info@scrantonproducts.com


CASE STUDY

Hiny Hiders are made from premium, American-made one-inch thick solid HDPE. The solid plastic partitions resist dents, scratches, corrosion, bacteria, graffiti, and mildew, and unlike traditional metal partitions, they’ll never rust. With the number of partitions required in the installation it was a challenge to find the material that would last. Solid plastic will not break, and it never needs to be painted. Hiny Hiders are available in a multitude of colors and textures however Reed took advantage of the product’s customization capabilities and specified the bathroom partitions be designed in the university’s school colors. In addition, to make the application even more unique, the door of each stall is personalized with the OSU logo. More than 500 partitions were installed in the new stadium. Today, according to Donald Clark, facility manager, the Hiny Hiders partitions have proven to be low“Routing the logo into each door shows the maintenance. “Our metal workability of HDPE,” said Reed. “We were able to stalls rusted, needed provide the university and the fans with a painting and graffiti was unique custom product for the new often a problem. Since the Hiny Hiders were facility,” said Reed. “The color is bright orange and the logo supports college spirit and fan installed we’ve had virtually no maintenance excitement.” issues in any of the restroom stalls. The most we’ve had to do is wash them down with a garden hose.” As Hiny Hiders are made with HDPE, they’ll have a long life cycle and be a cost-effective component to the new stadium. This is key in a stadium that has more than 40 restroom facilities. For OSU, such a large application, this is an enormous benefit. Since the 2009 installation, the Hiny Hiders have endured the cheers and jeers of sports fans. “The bathroom partitions have really shown their durability while retaining their great looks,” said Clark. “Every hinge, every latch, every hanger works as well today as it did three years ago,” he said. For Oklahoma State University, the plan to renovate the stadium was to transform a structure that was showing its age into a contemporary, state-of-theart facility. The goal was to create unrivaled facilities for football players and fans alike. Boone Pickens Stadium can now be considered one of America's top facilities from top to bottom.


Hiny Hider Specifications & Drawings

SPECIFICATIONS & DRAWINGS


Hiny Hider Floor-Mounted Overhead-Braced

FLOOR-MOUNTED OVERHEAD-BRACED Our strongest and most adaptable layout type works with any bathroom configuration.


Hiny Hider Floor Mounted Overhead Braced Specifications Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

FLOOR-MOUNTED OVERHEAD-BRACED

Solid Plastic Toilet Compartments Specifications - Section 10 2116

PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Solid plastic [toilet compartments] [urinal screens] [privacy screens] [and] [entry partitions]. B. Related Sections: 1. Division 01: Administrative, procedural, and temporary work requirements. 1.2 REFERENCES A. ASTM International (ASTM): 1. A167 - Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip. 2. B221 - Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes. 3. E84 - Standard Test Method for Surface Burning Characteristics of Building Materials. B. National Fire Protection Association (NFPA) 286 - Standard Methods of Fire Tests for Evaluating Contribution of Wall and Ceiling Interior Finish to Room Fire Growth. 1.3 SYSTEM DESCRIPTION A. Compartment Configurations: 1. [Toilet partitions] [privacy screens] and [entry partitions]: Floor mounted, overhead braced. 2. Urinal screens: [Wall] [Floor] mounted. 1.4 SUBMITTALS A. Submittals for Review: 1. Shop Drawings: Include dimensioned layout, elevations, trim, closures, and accessories. 2. Product Data: Manufacturer’s descriptive data for panels, hardware, and accessories. 3. Samples: [2 x 3] [__ x __] inch samples [showing available colors.] [in each color.] B. Sustainable Design Submittals: 1. Recycled Content: Certify percentages of post-consumer and pre-consumer recycled content. 2. Regional Materials: Certify distance between manufacturer and Project and between manufacturer and extraction or harvest point in miles. 1.5 QUALITY ASSURANCE A. Manufacturer Qualifications: Minimum [5] [__] years experience in manufacture of solid plastic toilet compartments with products in satisfactory use under similar service conditions. B. Installer Qualifications: Minimum [5] [__] years experience in work of this Section. 1.6 WARRANTIES A. Provide manufacturer’s 25 year warranty against breakage, corrosion, and delamination under normal conditions. PART 2 - PRODUCTS 2.1 MANUFACTURERS A. Contract Documents are based on products by Scranton Products. (www.scrantonproducts.com) B. Substitutions: [Under provisions of Division 01.] [Not permitted.]


Toilet Compartments & Screens | Hiny HidersÂŽ Toilet Partitions | Specifications & Drawings |

FLOOR-MOUNTED OVERHEAD-BRACED

Solid Plastic Toilet Compartments Specifications - Section 10 2116

2.2 MATERIALS A. Doors, Panels and Pilasters: 1. Solid Plastic fabricated from polymer resins compounded under high pressure, forming single thickness panel. 2. Waterproof and nonabsorbent, with self-lubricating surface, resistant to marks by pens, pencils, markers, and other writing instruments. 3. 1 inch thick with edges rounded to 1/4 inch radius. 4. Recycled content: Minimum [25] [__] percent. 5. Fire hazard classification: Not required. **** OR **** 6. Fire hazard classification: Class [A] [B] flame spread/smoke developed rating, tested to ASTM E84. **** OR **** 7. Fire hazard classification: Pass NFPA 286. 8. Color: [____.] [To be selected from manufacturer’s full color range.] B. Aluminum Extrusions: ASTM B221, 6463-T5 alloy and temper. C. Stainless Steel: ASTM A167, Type 304. 2.3 HARDWARE A. Hinges: 1. 8 inches long, fabricated from heavy-duty extruded aluminum with bright dip anodized finish, wraparound flanges, adjustable on 30-degree increments, through bolted to doors and pilasters with stainless steel, Torx head sex bolts. 2. Hinges operate on field-adjustable nylon cams, field adjustable in 30 degree increments. **** OR **** B. Hinges: Stealth integral hinge from door and pilaster material with exposed metal parts on interior of stall. **** OR **** C. Hinges: Regal hinge fabricated from heavy-duty cast aluminum, wrap around flanges, adjustable on 30-degree increments, through bolted to doors and pilasters. D. Door Strike and Keeper: 1. 6 inches long, fabricate from heavy-duty extruded aluminum with bright dip anodized finish, with wrap-around flanges secured to pilasters with stainless steel tamper resistant Torx head sex bolts. 2. Bumper: Extruded black vinyl. E. Latch and Housing: 1. Heavy-duty extruded aluminum. 2. Latch housing: Bright dip anodized finish. 3. Slide bolt and button: Black anodized finish. **** OR **** 4. Slide latch and paddle. F. Coat Hook/Bumper: 1. Combination type, chrome plated Zamak. 2. Equip outswing handicapped doors with second door pull and door stop. G. Door Pulls: Chrome plated Zamak.


Toilet Compartments & Screens | Hiny HidersÂŽ Toilet Partitions | Specifications & Drawings |

FLOOR-MOUNTED OVERHEAD-BRACED

Solid Plastic Toilet Compartments Specifications - Section 10 2116

2.4 COMPONENTS A. Doors and Dividing Panels: 55 inches high, mounted 14 inches above finished floor, [with aluminum heat-sinc fastened to bottom edges.] B. Pilasters: 82 inches high, fastened to pilaster sleeves with stainless steel tamper resistant Torx head sex bolt. C. Pilaster Sleeves: 3 inches high, [one-piece molded HDPE,] [20 gage stainless steel,] secured to pilaster with stainless steel tamper resistant Torx head sex bolt. D. Wall Brackets: 54 inches long, [Extruded PVC,] [heavy-duty aluminum, bright dip anodized finish,] fastened to pilasters and panels with stainless steel tamper resistant Torx head sex bolts. E. Headrail: Heavy-duty extruded aluminum, anti-grip design, clear anodized finish, fastened to headrail bracket with stainless steel tamper resistant Torx head sex bolt and at top of pilaster with stainless steel tamper resistant Torx head screws. F. Headrail Brackets: 20 gage stainless steel, satin finish, secured to wall with stainless steel tamper resistant Torx head screws. PART 3 EXECUTION 3.1 INSTALLATION A. Install compartments in accordance with manufacturer’s instructions and approved Shop Drawings. B. Install rigid, straight, plumb, and level. C. Locate bottom edge of doors and panels 14 inches above finished floor. D. Provide uniform, maximum 3/8 inch vertical clearance at doors. E. Not Acceptable: Evidence of cutting, drilling, or patching. 3.2 ADJUSTING A. Adjust doors and latches to operate correctly.


Hiny Hider Floor Mounted Overhead Braced Drawings Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

FLOOR-MOUNTED OVERHEAD-BRACED

8” Aluminum Wrap-Around Hinge Continuous Aluminum Brackets

PLAN ELEVATION

FRONT ELEVATION

FLOOR MOUNT

SIDE ELEVATION

HEADRAIL BRACE

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. * HEATSINC: Heatsinc is to be placed on the bottom of the panels & doors. (If specified) (Drawings are not to scale) Drawing shown with 8” wrap-around hinge. Please see individual section for all hardware options.

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

FLOOR-MOUNTED OVERHEAD-BRACED

8” Aluminum Wrap-Around Hinge Stirrup Brackets

PLAN ELEVATION

SIDE ELEVATION

FRONT ELEVATION

FLOOR MOUNT

HEADRAIL BRACE

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. * HEATSINC: Heatsinc is to be placed on the bottom of the panels & doors. (If specified) (Drawings are not to scale) Drawing shown with 8” wrap-around hinge. Please see individual section for all hardware options.

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders速 Toilet Partitions | Specifications & Drawings |

Floor-Mounted overhead-Braced

Regal Hinge Continuous Aluminum Brackets

PLAN ELEVATION

FRONT ELEVATION

Floor MOUNT

SIDE ELEVATION

Headrail BRACE

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. * HEATSINC: Heatsinc is to be placed on the bottom of the panels & doors. (If specified) (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders速 Toilet Partitions | Specifications & Drawings |

Floor-Mounted overhead-Braced

Regal Hinge Stirrup Brackets

PLAN ELEVATION

FRONT ELEVATION

Floor MOUNT

SIDE ELEVATION

Headrail BRACE

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. * HEATSINC: Heatsinc is to be placed on the bottom of the panels & doors. (If specified) (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders速 Toilet Partitions | Specifications & Drawings |

Floor-Mounted overhead-Braced

Stealth Integral Hinge Continuous Aluminum Brackets

PLAN ELEVATION

FRONT ELEVATION

Floor MOUNT

SIDE ELEVATION

Headrail BRACE

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. * HEATSINC: Heatsinc is to be placed on the bottom of the panels & doors. (If specified) (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders速 Toilet Partitions | Specifications & Drawings |

Floor-Mounted overhead-Braced

Stealth Integral Hinge Stirrup Brackets

PLAN ELEVATION

FRONT ELEVATION

Floor MOUNT

SIDE ELEVATION

Headrail BRACE

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. * HEATSINC: Heatsinc is to be placed on the bottom of the panels & doors. (If specified) (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

Floor-Mounted overhead-Braced

54” Stainless Steel Continuous Helix Hinge Continuous Aluminum Brackets

PLAN ELEVATION

FRONT ELEVATION

Floor MOUNT

SIDE ELEVATION

Headrail BRACE

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. * HEATSINC: Heatsinc is to be placed on the bottom of the panels & doors. (If specified) (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

Floor-Mounted overhead-Braced

54” Stainless Steel Continuous Helix Hinge Stirrup Brackets

PLAN ELEVATION

FRONT ELEVATION

Floor MOUNT

SIDE ELEVATION

Headrail BRACE

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. * HEATSINC: Heatsinc is to be placed on the bottom of the panels & doors. (If specified) (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

Floor-Mounted overhead-Braced

54” Stainless Steel Continuous Spring Hinge Continuous Aluminum Brackets

PLAN ELEVATION

FRONT ELEVATION

Floor MOUNT

SIDE ELEVATION

Headrail BRACE

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. * HEATSINC: Heatsinc is to be placed on the bottom of the panels & doors. (If specified) (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

Floor-Mounted overhead-Braced

54” Stainless Steel Continuous Spring Hinge Stirrup Brackets

PLAN ELEVATION

FRONT ELEVATION

Floor MOUNT

SIDE ELEVATION

Headrail BRACE

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. * HEATSINC: Heatsinc is to be placed on the bottom of the panels & doors. (If specified) (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

Floor-Mounted overhead-Braced

54” Surface Mounted Aluminum Continuous Hinge Continuous Aluminum Brackets

PLAN ELEVATION

FRONT ELEVATION

SIDE ELEVATION

Floor MOUNT

Headrail BRACE

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. * HEATSINC: Heatsinc is to be placed on the bottom of the panels & doors. (If specified) (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

Floor-Mounted overhead-Braced

54” Surface Mounted Aluminum Continuous Hinge Stirrup Brackets

PLAN ELEVATION

FRONT ELEVATION

Floor MOUNT

SIDE ELEVATION

Headrail BRACE

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. * HEATSINC: Heatsinc is to be placed on the bottom of the panels & doors. (If specified) (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Hiny Hider Floor To Ceiling

FLOOR TO CEILING Offers a unique aesthetic in which pilasters run directly from floor to ceiling.


Hiny Hider Floor To Ceiling Specifications Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

FLOOR TO CEILING

Solid Plastic Toilet Compartments Specifications - Section 10 2116

PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Solid plastic [toilet compartments] [urinal screens] [privacy screens] [and] [entry partitions]. B. Related Sections: 1. Division 01: Administrative, procedural, and temporary work requirements. 1.2 REFERENCES A. ASTM International (ASTM): 1. A167 - Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip. 2. B221 - Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes. 3. E84 - Standard Test Method for Surface Burning Characteristics of Building Materials. B. National Fire Protection Association (NFPA) 286 - Standard Methods of Fire Tests for Evaluating Contribution of Wall and Ceiling Interior Finish to Room Fire Growth. 1.3 SYSTEM DESCRIPTION A. Compartment Configurations: 1. [Toilet partitions] [privacy screens] and [entry partitions]: Floor-to-ceiling 2. Urinal screens: [Wall] [Floor] mounted. 1.4 SUBMITTALS A. Submittals for Review: 1. Shop Drawings: Include dimensioned layout, elevations, trim, closures, and accessories. 2. Product Data: Manufacturer’s descriptive data for panels, hardware, and accessories. 3. Samples: [2 x 3] [__ x __] inch samples [showing available colors.] [in each color.] B. Sustainable Design Submittals: 1. Recycled Content: Certify percentages of post-consumer and pre-consumer recycled content. 2. Regional Materials: Certify distance between manufacturer and Project and between manufacturer and extraction or harvest point in miles. 1.5 QUALITY ASSURANCE A. Manufacturer Qualifications: Minimum [5] [__] years experience in manufacture of solid plastic toilet compartments with products in satisfactory use under similar service conditions. B. Installer Qualifications: Minimum [5] [__] years experience in work of this Section. 1.6 WARRANTIES A. Provide manufacturer’s 25 year warranty against breakage, corrosion, and delamination under normal conditions. PART 2 - PRODUCTS 2.1 MANUFACTURERS A. Contract Documents are based on products by Scranton Products. (www.scrantonproducts.com) B. Substitutions: [Under provisions of Division 01.] [Not permitted.]


Toilet Compartments & Screens | Hiny HidersÂŽ Toilet Partitions | Specifications & Drawings |

FLOOR TO CEILING

Solid Plastic Toilet Compartments Specifications - Section 10 2116

2.2 MATERIALS A. Doors, Panels and Pilasters: 1. Solid Plastic fabricated from polymer resins compounded under high pressure, forming single thickness panel. 2. Waterproof and nonabsorbent, with self-lubricating surface, resistant to marks by pens, pencils, markers, and other writing instruments. 3. 1 inch thick with edges rounded to 1/4 inch radius. 4. Recycled content: Minimum [25] [__] percent. 5. Fire hazard classification: Not required. **** OR **** 6. Fire hazard classification: Class [A] [B] flame spread/smoke developed rating, tested to ASTM E84. **** OR **** 7. Fire hazard classification: Pass NFPA 286. 8. Color: [____.] [To be selected from manufacturer’s full color range.] B. Aluminum Extrusions: ASTM B221, 6463-T5 alloy and temper. C. Stainless Steel: ASTM A167, Type 304. 2.3 HARDWARE A. Hinges: 1. 8 inches long, fabricated from heavy-duty extruded aluminum with bright dip anodized finish, wraparound flanges, adjustable on 30-degree increments, through bolted to doors and pilasters with stainless steel, Torx head sex bolts. 2. Hinges operate on field-adjustable nylon cams, field adjustable in 30 degree increments. **** OR **** B. Hinges: Stealth integral hinge from door and pilaster material with exposed metal parts on interior of stall. **** OR **** C. Hinges: Regal hinge fabricated from heavy-duty cast aluminum, wrap around flanges, adjustable on 30-degree increments, through bolted to doors and pilasters. D. Door Strike and Keeper: 1. 6 inches long, fabricate from heavy-duty extruded aluminum with bright dip anodized finish, with wrap-around flanges secured to pilasters with stainless steel tamper resistant Torx head sex bolts. 2. Bumper: Extruded black vinyl. E. Latch and Housing: 1. Heavy-duty extruded aluminum. 2. Latch housing: Bright dip anodized finish. 3. Slide bolt and button: Black anodized finish. **** OR **** 4. Slide latch and paddle. F. Coat Hook/Bumper: 1. Combination type, chrome plated Zamak. 2. Equip outswing handicapped doors with second door pull and door stop. G. Door Pulls: Chrome plated Zamak.


Toilet Compartments & Screens | Hiny HidersÂŽ Toilet Partitions | Specifications & Drawings |

FLOOR TO CEILING

Solid Plastic Toilet Compartments Specifications - Section 10 2116

2.4 COMPONENTS A. Doors and Dividing Panels: 55 inches high, mounted 14 inches above finished floor, [with aluminum heat-sinc fastened to bottom edges.] B. Pilasters: 82 inches high, fastened to pilaster sleeves with stainless steel tamper resistant Torx head sex bolt. C. Pilaster Sleeves: 3 inches high, [one-piece molded HDPE,] [20 gage stainless steel,] secured to pilaster with stainless steel tamper resistant Torx head sex bolt. D. Wall Brackets: 54 inches long, [Extruded PVC,] [heavy-duty aluminum, bright dip anodized finish,] fastened to pilasters and panels with stainless steel tamper resistant Torx head sex bolts. E. Headrail: Heavy-duty extruded aluminum, anti-grip design, clear anodized finish, fastened to headrail bracket with stainless steel tamper resistant Torx head sex bolt and at top of pilaster with stainless steel tamper resistant Torx head screws. F. Headrail Brackets: 20 gage stainless steel, satin finish, secured to wall with stainless steel tamper resistant Torx head screws. PART 3 EXECUTION 3.1 INSTALLATION A. Install compartments in accordance with manufacturer’s instructions and approved Shop Drawings. B. Install rigid, straight, plumb, and level. C. Locate bottom edge of doors and panels 14 inches above finished floor. D. Provide uniform, maximum 3/8 inch vertical clearance at doors. E. Not Acceptable: Evidence of cutting, drilling, or patching. 3.2 ADJUSTING A. Adjust doors and latches to operate correctly.


Hiny Hider Floor To Ceiling Drawings Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

FLOOR to Ceiling

8” Aluminum Wrap-Around Hinge Continuous Aluminum Brackets

PLAN ELEVATION

FRONT ELEVATION

SIDE ELEVATION

FLOOR MOUNT

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. * HEATSINC: Heatsinc is to be placed on the bottom of the panels & doors. (If specified) (Drawings are not to scale) Drawing shown with 8” wrap-around hinge. Please see individual section for all hardware options.

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.

CEILING MOUNT


Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

FLOOR to Ceiling

8” Aluminum Wrap-Around Hinge Stainless Steel Stirrup Brackets

PLAN ELEVATION

FRONT ELEVATION

SIDE ELEVATION

FLOOR MOUNT

CEILING MOUNT

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. * HEATSINC: Heatsinc is to be placed on the bottom of the panels & doors. (If specified) (Drawings are not to scale) Drawing shown with 8” wrap-around hinge. Please see individual section for all hardware options.

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders速 Toilet Partitions | Specifications & Drawings |

Floor to Ceiling

Regal Hinge Continuous Aluminum Brackets

PLAN ELEVATION

FRONT ELEVATION

Floor MOUNT

SIDE ELEVATION

Ceiling Mount

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. * HEATSINC: Heatsinc is to be placed on the bottom of the panels & doors. (If specified) (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders速 Toilet Partitions | Specifications & Drawings |

Floor to Ceiling

Regal Hinge Stirrup Brackets

PLAN ELEVATION

FRONT ELEVATION

Floor MOUNT

SIDE ELEVATION

Ceiling Mount

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. * HEATSINC: Heatsinc is to be placed on the bottom of the panels & doors. (If specified) (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders速 Toilet Partitions | Specifications & Drawings |

Floor to Ceiling

Stealth Integral Hinge Continuous Aluminum Brackets

PLAN ELEVATION

FRONT ELEVATION

Floor MOUNT

SIDE ELEVATION

Ceiling Mount

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. * HEATSINC: Heatsinc is to be placed on the bottom of the panels & doors. (If specified) (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders速 Toilet Partitions | Specifications & Drawings |

Floor to Ceiling

Stealth Integral Hinge Stirrup Brackets

PLAN ELEVATION

FRONT ELEVATION

Floor MOUNT

SIDE ELEVATION

Ceiling Mount

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. * HEATSINC: Heatsinc is to be placed on the bottom of the panels & doors. (If specified) (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

Floor to Ceiling

54” Stainless Steel Continuous Helix Hinge Continuous Aluminum Brackets

PLAN ELEVATION

FRONT ELEVATION

Floor MOUNT

SIDE ELEVATION

Ceiling Mount

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. * HEATSINC: Heatsinc is to be placed on the bottom of the panels & doors. (If specified) (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

Floor to Ceiling

54” Stainless Steel Continuous Helix Hinge Stirrup Brackets

PLAN ELEVATION

FRONT ELEVATION

Floor MOUNT

SIDE ELEVATION

Ceiling Mount

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. * HEATSINC: Heatsinc is to be placed on the bottom of the panels & doors. (If specified) (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

Floor to Ceiling

54” Stainless Steel Spring Loaded Hinge Continuous Aluminum Brackets

PLAN ELEVATION

FRONT ELEVATION

Floor MOUNT

SIDE ELEVATION

Ceiling Mount

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. * HEATSINC: Heatsinc is to be placed on the bottom of the panels & doors. (If specified) (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

Floor to Ceiling

54” Stainless Steel Spring Loaded Hinge Stirrup Brackets

PLAN ELEVATION

FRONT ELEVATION

Floor MOUNT

SIDE ELEVATION

Ceiling Mount

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. * HEATSINC: Heatsinc is to be placed on the bottom of the panels & doors. (If specified) (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

Floor to Ceiling

54” Aluminum Continuous Hinge Continuous Aluminum Brackets

PLAN ELEVATION

FRONT ELEVATION

Floor MOUNT

SIDE ELEVATION

Ceiling Mount

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. * HEATSINC: Heatsinc is to be placed on the bottom of the panels & doors. (If specified) (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

Floor to Ceiling

54” Aluminum Continuous Hinge Stirrup Brackets

PLAN ELEVATION

FRONT ELEVATION

Floor MOUNT

SIDE ELEVATION

Ceiling Mount

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. * HEATSINC: Heatsinc is to be placed on the bottom of the panels & doors. (If specified) (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Hiny Hider Ceiling Hung

CEILING HUNG Ideal for installations requiring no obstructions on floor for easier maintenance.


Hiny Hider Ceiling Hung Specifications Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

CEILING HUNG

Solid Plastic Toilet Compartments Specifications - Section 10 2116

PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Solid plastic [toilet compartments] [urinal screens] [privacy screens] [and] [entry partitions]. B. Related Sections: 1. Division 01: Administrative, procedural, and temporary work requirements. 1.2 REFERENCES A. ASTM International (ASTM): 1. A167 - Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip. 2. B221 - Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes. 3. E84 - Standard Test Method for Surface Burning Characteristics of Building Materials. B. National Fire Protection Association (NFPA) 286 - Standard Methods of Fire Tests for Evaluating Contribution of Wall and Ceiling Interior Finish to Room Fire Growth. 1.3 SYSTEM DESCRIPTION A. Compartment Configurations: 1. [Toilet partitions] [privacy screens] and [entry partitions]: Ceiling hung 2. Urinal screens: [Wall] [Floor] mounted. 1.4 SUBMITTALS A. Submittals for Review: 1. Shop Drawings: Include dimensioned layout, elevations, trim, closures, and accessories. 2. Product Data: Manufacturer’s descriptive data for panels, hardware, and accessories. 3. Samples: [2 x 3] [__ x __] inch samples [showing available colors.] [in each color.] B. Sustainable Design Submittals: 1. Recycled Content: Certify percentages of post-consumer and pre-consumer recycled content. 2. Regional Materials: Certify distance between manufacturer and Project and between manufacturer and extraction or harvest point in miles. 1.5 QUALITY ASSURANCE A. Manufacturer Qualifications: Minimum [5] [__] years experience in manufacture of solid plastic toilet compartments with products in satisfactory use under similar service conditions. B. Installer Qualifications: Minimum [5] [__] years experience in work of this Section. 1.6 WARRANTIES A. Provide manufacturer’s 25 year warranty against breakage, corrosion, and delamination under normal conditions. PART 2 - PRODUCTS 2.1 MANUFACTURERS A. Contract Documents are based on products by Scranton Products. (www.scrantonproducts.com) B. Substitutions: [Under provisions of Division 01.] [Not permitted.]


Toilet Compartments & Screens | Hiny HidersÂŽ Toilet Partitions | Specifications & Drawings |

CEILING HUNG

Solid Plastic Toilet Compartments Specifications - Section 10 2116

2.2 MATERIALS A. Doors, Panels and Pilasters: 1. Solid Plastic fabricated from polymer resins compounded under high pressure, forming single thickness panel. 2. Waterproof and nonabsorbent, with self-lubricating surface, resistant to marks by pens, pencils, markers, and other writing instruments. 3. 1 inch thick with edges rounded to 1/4 inch radius. 4. Recycled content: Minimum [25] [__] percent. 5. Fire hazard classification: Not required. **** OR **** 6. Fire hazard classification: Class [A] [B] flame spread/smoke developed rating, tested to ASTM E84. **** OR **** 7. Fire hazard classification: Pass NFPA 286. 8. Color: [____.] [To be selected from manufacturer’s full color range.] B. Aluminum Extrusions: ASTM B221, 6463-T5 alloy and temper. C. Stainless Steel: ASTM A167, Type 304. 2.3 HARDWARE A. Hinges: 1. 8 inches long, fabricated from heavy-duty extruded aluminum with bright dip anodized finish, wraparound flanges, adjustable on 30-degree increments, through bolted to doors and pilasters with stainless steel, Torx head sex bolts. 2. Hinges operate on field-adjustable nylon cams, field adjustable in 30 degree increments. **** OR **** B. Hinges: Stealth integral hinge from door and pilaster material with exposed metal parts on interior of stall. **** OR **** C. Hinges: Regal hinge fabricated from heavy-duty cast aluminum, wrap around flanges, adjustable on 30-degree increments, through bolted to doors and pilasters. D. Door Strike and Keeper: 1. 6 inches long, fabricate from heavy-duty extruded aluminum with bright dip anodized finish, with wrap-around flanges secured to pilasters with stainless steel tamper resistant Torx head sex bolts. 2. Bumper: Extruded black vinyl. E. Latch and Housing: 1. Heavy-duty extruded aluminum. 2. Latch housing: Bright dip anodized finish. 3. Slide bolt and button: Black anodized finish. **** OR **** 4. Slide latch and paddle. F. Coat Hook/Bumper: 1. Combination type, chrome plated Zamak. 2. Equip outswing handicapped doors with second door pull and door stop. G. Door Pulls: Chrome plated Zamak.


Toilet Compartments & Screens | Hiny HidersÂŽ Toilet Partitions | Specifications & Drawings |

CEILING HUNG

Solid Plastic Toilet Compartments Specifications - Section 10 2116

2.4 COMPONENTS A. Doors and Dividing Panels: 55 inches high, mounted 14 inches above finished floor, [with aluminum heat-sinc fastened to bottom edges.] B. Pilasters: 82 inches high, fastened to pilaster sleeves with stainless steel tamper resistant Torx head sex bolt. C. Pilaster Sleeves: 3 inches high, [one-piece molded HDPE,] [20 gage stainless steel,] secured to pilaster with stainless steel tamper resistant Torx head sex bolt. D. Wall Brackets: 54 inches long, [Extruded PVC,] [heavy-duty aluminum, bright dip anodized finish,] fastened to pilasters and panels with stainless steel tamper resistant Torx head sex bolts. E. Headrail: Heavy-duty extruded aluminum, anti-grip design, clear anodized finish, fastened to headrail bracket with stainless steel tamper resistant Torx head sex bolt and at top of pilaster with stainless steel tamper resistant Torx head screws. F. Headrail Brackets: 20 gage stainless steel, satin finish, secured to wall with stainless steel tamper resistant Torx head screws. PART 3 EXECUTION 3.1 INSTALLATION A. Install compartments in accordance with manufacturer’s instructions and approved Shop Drawings. B. Install rigid, straight, plumb, and level. C. Locate bottom edge of doors and panels 14 inches above finished floor. D. Provide uniform, maximum 3/8 inch vertical clearance at doors. E. Not Acceptable: Evidence of cutting, drilling, or patching. 3.2 ADJUSTING A. Adjust doors and latches to operate correctly.


Hiny Hider Ceiling Hung Drawings Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

Ceiling hung

8” Aluminum Wrap-Around Hinge Continuous Aluminum Brackets

PLAN ELEVATION

FRONT ELEVATION

SIDE ELEVATION

CEILING MOUNT

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. * HEATSINC: Heatsinc is to be placed on the bottom of the panels & doors. (If specified) (Drawings are not to scale) Drawing shown with 8” wrap-around hinge. Please see individual section for all hardware options.

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.

CROSSBRACE


Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

Ceiling hung

8” Aluminum Wrap-Around Hinge Continuous Aluminum Brackets

CEILING BOLT DETAIL

Please note that the height to the top of the steel can be no more than 2 3/4”higher from the finished ceiling.

CEILING HUNG Ceiling Beam can only be structural steel. No other types are recommended. Only 6 1/2” threaded rods are recommended.

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. * HEATSINC: Heatsinc is to be placed on the bottom of the panels & doors. (If specified) (Drawings are not to scale) Drawing shown with 8” wrap-around hinge. Please see individual section for all hardware options.

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders速 Toilet Partitions | Specifications & Drawings |

Ceiling Hung

Regal Hinge Continuous Aluminum Brackets

PLAN ELEVATION

FRONT ELEVATION

Ceiling MOUNT

SIDE ELEVATION

CROSS BRACE

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. * HEATSINC: Heatsinc is to be placed on the bottom of the panels & doors. (If specified) (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

Ceiling Hung

Regal Hinge Continuous Aluminum Brackets

CEILING BEAM

Attention (provide the following) Floor to finished ceiling height: ___________ Please note that the height to the top of the steel can be no more than 2 3/4” higher from the finished ceiling. (See the above detail)

Ceiling Beam can only be structural steel. No other types are recommended. (Note: Unistrut is not considered structural steel and should not be used.) Only 6 1/2” threaded rods are recommended.

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. * HEATSINC: Heatsinc is to be placed on the bottom of the panels & doors. (If specified) (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders速 Toilet Partitions | Specifications & Drawings |

Ceiling Hung

Stealth Integral Hinge Continuous Aluminum Brackets

PLAN ELEVATION

FRONT ELEVATION

Ceiling MOUNT

SIDE ELEVATION

CROSS BRACE

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. * HEATSINC: Heatsinc is to be placed on the bottom of the panels & doors. (If specified) (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

Ceiling Hung

Stealth Integral Hinge Continuous Aluminum Brackets

CEILING BEAM

Attention (provide the following) Floor to finished ceiling height: ___________ Please note that the height to the top of the steel can be no more than 2 3/4” higher from the finished ceiling. (See the above detail)

Ceiling Beam can only be structural steel. No other types are recommended. (Note: Unistrut is not considered structural steel and should not be used.) Only 6 1/2” threaded rods are recommended.

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. * HEATSINC: Heatsinc is to be placed on the bottom of the panels & doors. (If specified) (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

Ceiling Hung

54” Stainless Steel Continuous Helix Hinge Continuous Aluminum Brackets

PLAN ELEVATION

FRONT ELEVATION

Ceiling MOUNT

SIDE ELEVATION

CROSS BRACE

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. * HEATSINC: Heatsinc is to be placed on the bottom of the panels & doors. (If specified) (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

Ceiling Hung

54” Stainless Steel Continuous Helix Hinge Continuous Aluminum Brackets

CEILING BEAM

Attention (provide the following) Floor to finished ceiling height: ___________ Please note that the height to the top of the steel can be no more than 2 3/4” higher from the finished ceiling. (See the above detail)

Ceiling Beam can only be structural steel. No other types are recommended. (Note: Unistrut is not considered structural steel and should not be used.) Only 6 1/2” threaded rods are recommended.

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. * HEATSINC: Heatsinc is to be placed on the bottom of the panels & doors. (If specified) (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

Ceiling Hung

54” Stainless Steel Continuous Spring Hinge Continuous Aluminum Brackets

PLAN ELEVATION

FRONT ELEVATION

Ceiling MOUNT

SIDE ELEVATION

CROSS BRACE

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. * HEATSINC: Heatsinc is to be placed on the bottom of the panels & doors. (If specified) (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

Ceiling Hung

54” Stainless Steel Continuous Spring Hinge Continuous Aluminum Brackets

CEILING BEAM

Attention (provide the following) Floor to finished ceiling height: ___________ Please note that the height to the top of the steel can be no more than 2 3/4” higher from the finished ceiling. (See the above detail)

Ceiling Beam can only be structural steel. No other types are recommended. (Note: Unistrut is not considered structural steel and should not be used.) Only 6 1/2” threaded rods are recommended.

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. * HEATSINC: Heatsinc is to be placed on the bottom of the panels & doors. (If specified) (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

Ceiling Hung

54” Surface Mounted Aluminum Hinge Continuous Aluminum Brackets

PLAN ELEVATION

FRONT ELEVATION

Ceiling MOUNT

SIDE ELEVATION

CROSS BRACE

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. * HEATSINC: Heatsinc is to be placed on the bottom of the panels & doors. (If specified) (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

Ceiling Hung

54” Surface Mounted Aluminum Hinge Continuous Aluminum Brackets

CEILING BEAM

Attention (provide the following) Floor to finished ceiling height: ___________ Please note that the height to the top of the steel can be no more than 2 3/4” higher from the finished ceiling. (See the above detail)

Ceiling Beam can only be structural steel. No other types are recommended. (Note: Unistrut is not considered structural steel and should not be used.) Only 6 1/2” threaded rods are recommended.

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. * HEATSINC: Heatsinc is to be placed on the bottom of the panels & doors. (If specified) (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Hiny Hider Screens

SCREENS


Hiny Hider Urinal Screens Specifications Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

SCREENS

Solid Plastic Toilet Compartments Specifications - Section 10 2116

PART 1 - GENERAL 1.1 SUBMITTALS A. Plastic compartment work includes the following, where indicated: 1. Solid Plastic Privacy Screens B. Furnish all labor and materials necessary for the completion of work in this section as shown on the contract drawings and specified herein. C. Work in this section shall include, but is not limited to: 1. Privacy screens 2. Hardware for privacy screens 3. Shop drawings and working drawings 4. Manufacturers guarantee D. Related work specified elsewhere shall include accessories and anchorage/blocking for attachment of privacy screens. 1.2 PRODUCT DATA 1. Submit six (6) sets of shop drawings and details for architect’s approval 2. Colors shall be selected from the manufacturer’s full range of colors. 3. Color samples and hardware samples shall be submitted for approval by the architect upon request. 1.3 QUALITY ASSURANCE A. Manufacturer Qualifications: Minimum [5] [__] years experience in manufacture of solid plastic toilet compartments with products in satisfactory use under similar service conditions. B. Installer Qualifications: Minimum [5] [__] years experience in work of this Section 1.4 WARRANTIES A. Provide manufacturer’s 25 year warranty against breakage, corrosion, and delamination under normal conditions. PART 2 - PRODUCTS 2.1 MANUFACTURERS A. Contract Documents are based on products by Scranton Products. (www.scrantonproducts.com) B. Substitutions: [Under provisions of Division 01.] [Not permitted.] 2.2 MATERIALS A. Doors, Panels and Pilasters: 1. Privacy screens and optional pilasters shall be 1” thick constructed from solid plastic compounded under high pressure. 2. Waterproof and nonabsorbent, with self-lubricating surface, resistant to marks by pens, pencils, markers, and other writing instruments. 3. 1 inch thick with edges rounded to 1/4 inch radius. 4. Recycled content: Minimum [25] [__] percent. 5. Fire hazard classification: Not required. **** OR **** 6. Fire hazard classification: Class [A] [B] flame spread/smoke developed rating, tested to ASTM E84.


Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

SCREENS

Solid Plastic Toilet Compartments Specifications - Section 10 2116

**** OR **** 7. Fire hazard classification: Pass NFPA 286. 8. Color: [____.] [To be selected from manufacturer’s full color range.] B. Aluminum Extrusions: ASTM B221, 6463-T5 alloy and temper. C. Stainless Steel: ASTM A167, Type 304. 2.3 HARDWARE A. Overhead braced pilasters and floor supported pilasters (if required) shall have pilaster shoes 3” high and made of one-piece molded plastic [Color to be selected from manufacturers full color range] OR pilaster shows shall be 3” high (type 304, 20 gauge) stainless steel. Pilaster shoes shall be secured to the pilaster and secured to the pilaster with a stainless steel tamper resistant torx head sex bold. B. Floor to ceiling pilasters (if required) shall have a stainless steel angle bracket used to attached pilasters at floor and ceiling in lieu of shoes. These angle brackets shall be attached to pilasters with ¾” stainless steel tamper resistant torx head screws. Pilaster sleeves shall be 4” high stainless steel (type 304, 20 gauge) and secured to pilasters with a stainless steel tamper resistant torx head sex bolt. Sleeves shall conceal the angle brackets connections at the floor and ceiling. C. Wall brackets shall be 41” or 54” long, made of extruded PVC plastic [Color to be selected from manufacturers full color range]. These plastic brackets are fastened to the pilaster with stainless steel tamper resistant torx head screws and fastened ot the panels with stainless steel tamper resistant torx head sex bolts. OR, wall brackets shall be 1 ½” stirrup type made of heavy-duty aluminum (6463-T5 alloy) with a bright dip anodized finish. Stirrup brackets shall be fastened to pilasters and panels with stainless steel tamper resistant torx head sex bolts. D. Headrail ((used with optional 82” pilasters only) shall be made of heavy-duty extruded aluminum (64630T4 alloy) with anti-grip design and integrated curtain track. The headrail shall have a clear anodized finish and shall be fastened to the headrail bracket by a stainless steel tamper resistant torx head sex bolt, and fastened at the top of the pilaster with stainless steel tamper resistant torx head screws. E. Headrail brackets (required with headrail) shall be 20 gauge stainless steel with a sation finish and secured to the wall with a stainless steel tamper resistant torx head screws. 2.4 CONSTRUCTION A. Panels (and pilasters if required) shall be 1” thick with all edges rounded to a ¼” radius. B. Panels shall be typically 42” or 55” high, mounted at 14” above the finished floor. An aluminum heat sinc may be fastened to the bottom edges (optional) C. Pilasters (if required) shall typically be 56”, 69” or 82” high and fastened into a 3” high pilaster show with stainless steel angle bracket and sleeve. PART 3 - EXECUTION 3.1 PREPARATION A. Examine areas to receive screens for correct height and spacing of anchorage/blocking and plumbing fixtures that may affect installation of screens. Report any discrepancies to the architect. B. Take complete and accurate measurements of complete screen locations. C. Start of work constitutes acceptance of job. 3.2 INSTALLATION A. Install partitions rigid, straight, plumb, and level manor with plastic laid out as shown on shop drawings and manufacturer’s installation instructions. B. All panels shall typically be mounted at 14” above finished door C. No evidence of cutting, drilling and/or patching shall be visible on the finished work D. Finished surfaces shall be cleaned after installation and be left free of all imperfections.


Hiny Hider Urinal Screens Drawings Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

screens

18” x 42” Urinal Screen Elevations Stirrup Brackets

WALL HUNG

FLOOR SUPPORTED

FLOOR TO CEILING

HEADRAIL BRACED

NOTES: NOTES: 1. Standard Screens sizes are 24” x 42” and 18” x 42” although custom sizes are available upon request. 2. Any screen over 30” is recommended to have a floor supported pilaster.

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. * HEATSINC: Heatsinc is to be placed on the bottom of the panels & doors. (If specified) (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

screens

24” x 42” Urinal Screen Elevations Stirrup Brackets

WALL HUNG

FLOOR SUPPORTED

FLOOR TO CEILING

HEADRAIL BRACED

NOTES: NOTES: 1. Standard Screens sizes are 24” x 42” and 18” x 42” although custom sizes are available upon request. 2. Any screen over 30” is recommended to have a floor supported pilaster.

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. * HEATSINC: Heatsinc is to be placed on the bottom of the panels & doors. (If specified) (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

screens

24” x 55” Urinal Screen Elevations Stirrup Brackets

WALL HUNG

FLOOR SUPPORTED

FLOOR TO CEILING

HEADRAIL BRACED

NOTES: NOTES: 1. Standard Screens sizes are 24” x 42” and 18” x 42” although custom sizes are available upon request. 2. Any screen over 30” is recommended to have a floor supported pilaster.

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. * HEATSINC: Heatsinc is to be placed on the bottom of the panels & doors. (If specified) (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

screens

48” Urinal Screen Elevations Stirrup Brackets

WALL HUNG

FLOOR SUPPORTED

FLOOR TO CEILING

HEADRAIL BRACED

NOTES: NOTES: 1. Standard Screens sizes are 24” x 42” and 18” x 42” although custom sizes are available upon request. 2. Any screen over 30” is recommended to have a floor supported pilaster.

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. * HEATSINC: Heatsinc is to be placed on the bottom of the panels & doors. (If specified) (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

screens

55” Urinal Screen Elevations Stirrup Brackets

WALL HUNG

FLOOR SUPPORTED

FLOOR TO CEILING

HEADRAIL BRACED

NOTES: NOTES: 1. Standard Screens sizes are 24” x 42” and 18” x 42” although custom sizes are available upon request. 2. Any screen over 30” is recommended to have a floor supported pilaster.

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. * HEATSINC: Heatsinc is to be placed on the bottom of the panels & doors. (If specified) (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Hiny Hider Hardware

HARDWARE Continuous Brackets

Strikes

54” Plastic or Stainless Steel•; 54” or 68” Aluminum

6” Aluminum

Single Ear

Double Ear

54” or 71” Continuous Aluminum•

Stirrup Brackets

Head Rail

Latches

Aluminum or Stainless Steel

Aluminum

Aluminum or Stainless Steel•†

Double Ear

Single Ear

Shoes Plastic Pilaster††

3” Stainless Steel emergency access

Hinges Stainless Steel

8” Wrap Around

54”, 65”, 71” Continuous Aluminum•

54”, 65”, 71” Continuous Stainless Steel Helix•

Regal Hinge

•Optional hardware † Stainless steel option varies from aluminum hardware shown. †† Limited colors available.

54”, Continuous Stainless Steel Spring Loaded•

Stealth Integral Hinge


Hiny Hider Hinges

HINGES Hinges are offered in a variety of different styles, no sight and continuous options to meet any need.


Hiny Hider Hinges Drawings Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

hinges

8” Aluminum Wrap Around

NOTES: Shown is the heavy duty extruded aluminum (6463-T5 alloy) 8” wrap around hinge as supplied by Scranton Products. The hinge has a bright dipped anodized finish. The top hinge (as shown) contains the cam mechanism in it to insure that the door returns fully closed. Hinges can be adjusted in the field for proper operation.

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

hinges

8” Aluminum Wrap Around - Surface Mount

NOTES: Shown is the heavy duty extruded aluminum (6463-T5 alloy) 8” surface mounted hinge as supplied by Scranton Products. The hinge has a bright dipped anodized finish. A 1/2” cardboard spacer is placed on the nylon pin between the two parts of the bottom hinge, so that there is enough room for the lower half of the bottom hinge to move up with the cam action in the top hinge. (Note: This spacer cannot be removed until after the hinges are installed.)

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

hinges

8” Surface Mount Hinge Solid Plastic Mount

PLAN ELEVATION - INSWING

STEP #1

PLAN ELEVATION - OUTSWING

STEP #2

STEP #3

Surface Mounted Hinge Installation Instructions 1. Using the supplied 2 1/2” torx head screws attach panel to wall at 14” above the finished floor standard. 2. See Installation Booklet for hinge attachment to the door. 3. Using Scranton Products Installation Instructions Booklet for reference, attach the hinges to the surface mounted panel using the 3/4” torx screws.

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

hinges

8” Surface Mount Hinge Direct Wall Mount

PLAN ELEVATION - INSWING

PLAN ELEVATION - OUTSWING

Surface Mounted Hinge Installation Instructions Use Scranton Products Installation Instructions Booklet for attachment.

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders速 Toilet Partitions | Specifications & Drawings |

hinges

Regal Hinge System

Shown is the aluminum Regal hinge assembly. The kit comes complete with (4) Regal hinges, (2) Left hand plates, (2) Right hand plates, (4) Femal cam bushings, (1) dummy pin, (1) Cam insert, and Fasteners. Colors available: Smoke, Ember or Frost

Regal Hinge

Slider Latch

Regal & Slider Latch comes in three color options: Ember, Smoke, and Frost.

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

hinges

Stealth Integral Hinge

Stealth “L” Brackets: Are always to be mounted on the inside of the toilet compartment and flush with door edge.

Stealth “L” Brackets: Chrome Plated Steel

Note:

Stealth Integral Hinge

Shown is Scranton Products Stealth Integral hinge system. The pilaster and door are manufactured to accept the nylon Integral hinge.

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

hinges

54”, 65” or 71” Surface Mounted Aluminum Continuous Hinge

Note: Shown is the 54”, 65” or 71” continuous heavy duty extruded aluminum (6463-T5 alloy) hinge as supplied by Scranton Products. Hinge can only be set to close position. This hinge is spring loaded and is made to help the door close. The hinge has a bright dipped anodized finish. Note: All continuous hinges are NON-Handed and Not Adjustable.

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

hinges

54”, 65”, or 71” Aluminum Continuous Hinge - Surface Mounted

PLAN ELEVATION - INSWING

PLAN ELEVATION - OUTSWING

INSWING

OUTSWING

Surface Mounted Hinge Installation Instructions 1. Using the supplied 2 1/2” torx head screws attach the 5” x 55” panel to the wall at 14” above the finished floor, standard. 2. Using the 3/4” ST/ST torx screw attach the hinge to the panel. 3. Using the 3/4” ST/ST torx screw attach the door to the hinge with an approx. 1/8” gap between the door and panel surface. (fig. A or fig. B)

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

hinges

54” or 65” Continuous Stainless Steel Helix Hinge

54” or 65” Helix Hinge The 54”, 65” helix hinge is made from 14 gauge, #304 stainless steel. The helix hinge contains a 1/4” stainless steel pin that is welded and ground. This hinge comes with a brushed finish and is pre-drilled. Hinge has 2 options: in-swing or out-swing. In-swing is set open at 15 degrees open. Out-swing is set in closed position.

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.

or 65”


Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

hinges

54” or 65” Stainless Steel Helix Hinge - Surface Mounted

PLAN ELEVATION - INSWING

PLAN ELEVATION - OUTSWING

INSWING

OUTSWING

Surface Mounted Hinge Installation Instructions 1. Using the supplied 2 1/2” torx head screws attach the 5” x 55” panel to the wall at 14” above the finished floor, standard. 2. Using the 3/4” ST/ST torx screw attach the hinge to the panel. 3. Using the 3/4” ST/ST torx screw attach the door to the hinge with an approx. 1/8” gap between the door and panel surface. (fig. A or fig. B)

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

hinges

54” Stainless Steel Spring Hinge

Note: Shown is Scranton Products 54” Stainless Steel spring loaded hinge. The hinge is made from 16 gauge #304 stainless steel and is pre-drilled.

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

hinges

54” Stainless Steel Spring Hinge - Surface Mounted

PLAN ELEVATION - INSWING

PLAN ELEVATION - OUTSWING

INSWING

OUTSWING

Surface Mounted Hinge Installation Instructions 1. Using the supplied 2 1/2” torx head screws attach the 5” x 55” panel to the wall at 14” above the finished floor, standard. 2. Using the 3/4” ST/ST torx screw attach the hinge to the panel. 3. Using the 3/4” ST/ST torx screw attach the door to the hinge with an approx. 1/8” gap between the door and panel surface. (fig. A or fig. B)

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Hiny Hider Brackets

BRACKETS Brackets are offered in continuous or stirrup & are made from aluminum, plastic or stainless adding strength to any installation.


Hiny Hider Bracket Drawings Toilet Compartments & Screens | Hiny Hiders速 Toilet Partitions | Specifications & Drawings |

Brackets

Aluminum or Stainless Steel Single-Ear Stirrup Bracket

Note: Shown is Scranton Products heavy duty extruded aluminum (6463-T5 alloy) single ear stirrup bracket. The bracket has a bright dipped anodized finish.

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders速 Toilet Partitions | Specifications & Drawings |

Brackets

Aluminum or Stainless Steel Double-Ear Stirrup Bracket

Note: Shown is Scranton Products heavy duty extruded aluminum (6463-T5 alloy) double ear stirrup bracket. The bracket has a bright dipped anodized finish.

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

Brackets

41”, 54” or 68” Aluminum Continuous Single-Ear Bracket

Note: Shown is the 54” heavy duty extruded aluminum (6463-T5 alloy) single ear continuous wall bracket. The bracket has a bright dipped anodized finish.

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

Brackets

41”, 54” or 68” Aluminum Double Ear Continuous Bracket

Note: Shown is the 54” heavy duty extruded aluminum (6463-T5 alloy) double ear continuous wall bracket. The bracket has a bright dipped anodized finish.

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

Brackets

41” or 54” Plastic or Stainless Steel Single Ear Continuous Bracket

Note: Shown is the 54” plastic continuous bracket extruded from pvc plastic. This is standard hardware supplied by Scranton products.

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

Brackets

41” or 54” Plastic or Stainless Steel Double Ear Continuous Bracket

Note: Shown is the 54” plastic continuous bracket extruded from pvc plastic. This is standard hardware supplied by Scranton products.

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Hiny Hider Shoes

SHOES One piece construction pilaster shoes are offered in durable stainless steel and plastic options.


Hiny Hider Shoe Drawings Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

shoes

Plastic Pilaster Shoe

Note: Shown is the plastic pilaster shoe, made from high density polyethylene (HDPE) resins, which are injection molded into shoes ranging in sizes from 3” up to 12” wide in 1” increments, and 14” to 24” wide in even sizes only.

Details

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

shoes

Stainless Steel Pilaster Shoe

Note: Shown is the stainless steel (type 201-20 gauge) pilaster shoe ranging in lengths from 3” wide up to 24” wide in 1” increments, and 14” wide to 24” wide in even sizes only. The shoes have a satin finish on all exposed surfaces.

Details

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

SLEEVE

Stainless Steel Pilaster Sleeve

Note: Shown is the stainless steel (type 201-20 gauge) pilaster sleeve ranging in lengths from 3” wide up to 24” wide in 1” increments, and 14” wide to 24” wide in even sizes only. The sleeves have a satin finish on all exposed surfaces.

FLOOR MOUNT

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.

CEILING MOUNT


Hiny Hider Headrails

HEADRAILS An anti-grip profile deters unintended use and maintains safety. Where desired, an integrated shower curtain track accomodates optional shower curtain hooks.


Hiny Hider Headrail Drawings Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

headrails

1” Aluminum Headrail

Headrail Endcap

Note: Shown is the heavy duty extruded aluminum (6063-T5 alloy) 1” headrail with endcap as supplied by Scranton Products. The headrail has a satin finish. Integrated into the headrail is a curtain hook track, for which Scranton Products can provide curtain hooks.

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

headrails

1” Stainless Steel Headrail Bracket

Note: Shown is the 1” stainless steel (type 304 -20 gauge) headrail bracket as supplied by Scranton Products. The bracket has a satin finish on all exposed surfaces.

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Hiny Hider Door Hardware

DOOR HARDWARE Heavy duty hardware complements any design option and is available in anodized aluminum & stainless steel.


Hiny Hider Door Hardware Drawings Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

LATCH

Universal Emergency Aluminum Slide Latch

Right Hand In

Left Hand In

Note: Note 1: Shown is the heavy-duty extruded aluminum (6463-T5 alloy) slide latch as supplied by Scranton Products. The housing of the latch has a bright-dipped anodized finish. The slide bar and button have a black anodized finish. Note 2: For emergency access on outswing doors, set the latch on the inside of the door at 44 5/8” to the center of the latch, and approximately 5/8” away from the edge of the door.

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

STRIKE/KEEPER

6” Inswing Aluminum Strike/Keeper

Note: Note 1: Shown is the heavy-duty extruded aluminum (6463-T5 alloy) 6” inswing strike/keeper as supplied by Scranton Products. Note 2: The strike/keeper has a bright dipped anodized finish. The hard rubber bumper is installed in the strike/keeper at the factory.

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

STRIKE/KEEPER

6” Outswing Aluminum Strike/Keeper

Note: Note 1: Shown is the heavy-duty extruded aluminum (6463-T5 alloy) 6” outswing strike/keeper as supplied by Scranton Products. Note 2: The strike/keeper has a bright dipped anodized finish. The hard rubber bumper is installed in the strike/keeper at the factory.

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders® Toilet Partitions | Specifications & Drawings |

STRIKE/KEEPER

54” & 71” Continuous Aluminum Strike/Keeper

54” Contiunuous Aluminum Strike/Keeper

71” Contiunuous Aluminum Strike/Keeper

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny HidersÂŽ Toilet Partitions | Specifications & Drawings |

LATCH/STRIKE/KEEPER

3� Stainless Steel Emergency Access

Stainless Steel Slide Latch

Stainless Steel In-Swing Strike

Stainless Steel Out-Swing Strike

Note: Shown is the cast stainless steel (type 304) slide latch as supplied by Scranton Products. The latch has a satin finish on all exposed surfaces.

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders速 Toilet Partitions | Specifications & Drawings |

door PULL

Chrome Plated Zamak Door Pull

Note: Shown is the chrome plated zamak door pull as supplied by Scranton Products. (2 door pulls provided in in-swing and out-swing standard door hardware kits)

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders速 Toilet Partitions | Specifications & Drawings |

COAT HOOK BUMPER

Chrome Plated Zamak Coat Hook Bumper

Note: Shown is the chrome plated zamak coathook/door stop as supplied by Scranton Products.

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Toilet Compartments & Screens | Hiny Hiders速 Toilet Partitions | Specifications & Drawings |

WALL STOP

Chrome Plated Zamak Wall Stop

Note: Shown is the chrome plated zamak wall stop as supplied by Scranton Products.

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Hiny Hider Fire Rated Materials

FIRE RATED MATERIALS


Toilet Compartments & Screens | Hiny Hiders速 Toilet Partitions |

FIRE RATED BATHROOM PARTITIONS

Scranton Products offers its full product line in a variety of fire rating options. To meet your fire rating need, simply indicate what fire rating you desire when specifying or quoting the job and the correct fire rated material will be used. Scranton Products currently offers standard, Class B, Class A and NFPA286 complaint materials. These are the relevant fire ratings for our classification of products. For additional information, contact your Scranton Products representative.

TM


Toilet Compartments & Screens | Hiny Hiders速 Toilet Partitions |

FIRE RATING INFORMATION

Hiny Hider Solid Plastic Toilet Partitions

Testing Requirements FSI

SDI

Class A

<25

0-450

Class B

26-75

0-450

NOTE: NFPA 286 has a pass/fail rating based on established testing criteria and methodology.

Scranton Products Test Results

Flame Spread Index

Smoke Development

Classifications

Class B Solid Plastic Toilet Partitions

60

350

MEETS CRITERIA

Class A Solid Plastic Toilet Partitions

15

100

MEETS CRITERIA

NFPA 286 Solid Plastic Toilet Partitions

PASS

TM


Resistall Partitions

RESISTALL® PARTITIONS As durable as it is affordable • Engineered plastic • Innovative non porous panel design • Easy installation • Highly impact resistant


Resistall Case Study

CASE STUDY

MID-SOUTH ICE HOUSE INSTALLS PARTITIONS TO STAND UP TO HOCKEY, KIDS AND CROWDS

With its humid subtropical climate and the lack of wintry conditions including snow, hockey would seem a remote interest for the nearly 700,000 residents of Memphis, Tennessee. However, deeply rooted in this Southeastern city, which ranks as the 20th largest in the United States, is a profound interest in hockey that extends beyond the Memphis River Kings minor league ice hockey team to the many adult and junior leagues throughout the region.

Mid-South Ice House Resistall Partitions

“Several years of planning and research went into the design and construction of this arena,” says Keith Saunders Sr., owner of Division 10, Inc., a leading provider of construction specialty products and services throughout Tennessee, and the Southeastern region. “I’ve known one of the owners personally for 20 years and truly understood his desire to construct a state-of-the-art, professional skating experience for people who were already traveling to Little Rock or Nashville to improve their games and forms or just enjoy a skate anytime of year.” Residents were delighted when their desire to spend more time on the ice was met in September 2011 when the Mid-South Ice House opened to provide the Memphis Metro area with a year-round opportunity to play hockey, figure skate, take lessons or just enjoy some leisurely ice time during the city’s latest hot spell. Transformed from an empty warehouse to premier ice skating facility, the Ice House also features numerous activities such as curling and broomball for all ages.

www.scrantonproducts.com ● 800.445.5148 ● info@scrantonproducts.com


CASE STUDY

The Mid-South Ice House has continuous activity with minor league hockey, private leagues and the general public, so Saunders said the facility had to be built to last and take punishment on almost every level. “We specified the strongest and most durable materials for use throughout the Ice House,” explains Saunders. “That particularly included the restrooms, where we installed Resistall™ Partitions from Scranton Products. We knew we needed long-lasting toughness and based on my prior experience with the product line, Resistall was the first and really only choice.” A leading provider of unique and attractive interior partitions over the past 25 years, Scranton Products offers an assortment of HDPE products in variety of colors, textures and ADA-compliant configurations. In addition, the company’s Resistall Partitions are especially designed to never need painting. Unlike metal partitions which are subject to rust, they “We specified the strongest and most offer superior resistance durable materials for use throughout the to dents, scratches, Ice House,” explains Saunders. “That graffiti, corrosion, mildew particularly included the restrooms, and moisture. Another where we installed Resistall™ Partitions benefit is that they are very easy to clean and from Scranton Products.” naturally resistant to bacteria. “This arena is my passion,” says Al Austen, co-owner of the Mid-South Ice House and a general contractor by trade. “I spent years developing this project and was deeply involved in every aspect of its planning and construction. I’m proud of what we accomplished and of the ability to provide our local Memphis residents with an ideal, year-round venue for participating in hockey, figure skating and all ice-related activities.” Austen adds, “We selected the partitions from Scranton Products because they fit into this overall vision. They are easy to maintain and extremely hard to dent as opposed to metal partitions. Plus, the pricing fit our budget and they do look good. The gray Resistall Partitions were used in 15 stalls and we haven’t had a problem yet. In fact, I would be surprised if any arose since I installed several of them myself.”


Resistall Sell Sheet

Resistall™ Partitions

Hybrid

AS DURABLE AS IT IS AFFORDABLE

(Photo shown with optional additional continuous strikes)

Resistall™ Partitions are fully power washable and steam cleanable, eliminating the need for harmful chemical cleaners. Because they never need painting, Resistall™ Partitions deliver no VOC emissions and are GREENGUARD® Children and Schools Certified. What’s more, they resist bacteria, odors, moisture and mildew. NO MOLD GROWTH Unlike metal partitions which have a cardboard core, Resistall™ Partitions are impermeable to moisture and does not support the growth of mold and mildew. NO PAINTING Resistall™ Partitions are solid color throughout and will not chip so they never require painting.

CLEANER, HEALTHIER BATHROOMS When moisture comes in contact with metal, rust begins to form, becoming a breeding ground for germs.


WE CALL IT R E S I S TA L L ™ FOR A REASON Hybrid

Resistall™ Partitions stand tough over time with many features and benefits. Unlike metal partitions, they are impermeable to moisture and will never rust or need painting. In addition, Resistall™ Partitions will not delaminate and are built to resist mildew, odors, corrosion and dents, saving you the added costs of maintenance. 1 Paneled Design

2 Solid Pilasters

This unique aesthetic style on the doors and side panels deliver a premium look and feel.

Front Design

Solid HDPE is used for the pilasters to ensure maximum strength at the anchoring points.

Inside Design

3 Orange Peel Texture Reduces signs of wear and deters scratches, keeping interiors looking great for years to come.

4 Worry–Free Hardware To complement any interior, we offer an array of great-looking hardware options.

Color

Black

Grey

Beige Color matching is limited by printing process. Actual samples available and are recommended prior to color selections. All swatches shown in Orange Peel.

801 E Corey Street Scranton, PA 18505 ● 800.445.5148 ● info@scrantonproducts.com ● www.scrantonproducts.com


Resistall Specifications

SPECIFICATIONS


Toilet Compartments & Screens | Resistall® Partitions | Specifications |

SPECIFICATIONS

Section 10 2116

PART 1 - GENERAL 1.1 SUMMARY

A. Section Includes: 1. Plastic [toilet compartments] [urinal screens] [privacy screens] [and] [entry partitions].

B. Related Sections: 1. Division 01: Administrative, procedural, and temporary work requirements.

1.2 REFERENCES

A. ASTM International (ASTM): 1. A167 - Standard Specifi cation for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip. 2. B221 - Standard Specifi cation for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profi les, and Tubes.

1.3 SYSTEM DESCRIPTION

A. Compartment Confi gurations: 1. [Toilet partitions] [privacy screens] and [entry partitions]: Floor mounted, overhead braced. 2. Urinal screens: [Wall] [Floor] mounted.

1.4 SUBMITTALS

A. Submittals for Review: 1. Shop Drawings: Include dimensioned layout, elevations, trim, closures, and accessories. 2. Product Data: Manufacturer’s descriptive data for panels, hardware, and accessories. 3. Samples: [2 x 3] [__ x __] inch samples [showing available colors.] [in each color.]

B. Sustainable Design Submittals: 1. Recycled Content: Certify percentages of post-consumer and pre-consumer recycled content. 2. Regional Materials: Certify distance between manufacturer and Project and between manufacturer and extraction or harvest point in miles.

1.5 QUALITY ASSURANCE

A. Manufacturer Qualifi cations: Minimum [5] [__] years experience in manufacture of plastic toilet compartments with products in satisfactory use under similar service conditions.

B. Installer Qualifi cations: Minimum [5] [__] years experience in work of this Section.

1.6 WARRANTIES

A. Provide manufacturer’s 5 year warranty against breakage, corrosion, and delamination under normal conditions.

PART 2 - PRODUCTS 2.1 MANUFACTURERS

A. Contract Documents are based on Resistall products by Scranton Products. (www.scrantonproducts.com)

B. Substitutions: [Under provisions of Division 01.] [Not permitted.]


Toilet Compartments & Screens | ResistallÂŽ Partitions | Specifications |

SPECIFICATIONS

Section 10 2116

2.2 MATERIALS

A. Doors and Panels 1. Constructed of two sheets of 1/8 inch thick high density polyethylene (HDPE), thermoformed with touch points into single engineered panel, with structural inserts on top ad middle rails. 2. Waterproof and nonabsorbent, with self-lubricating surface, resistant to marks by pens, pencils, markers, and other writing instruments. 3. Recycled content: Minimum [25] [__] percent. 4. Color: [____.] [To be selected from manufacturer’s full color range. B. Pilasters 1. Solid Plastic fabricated from polymer resins compounded under high pressure, forming single thickness panel. 2. Waterproof and nonabsorbent, with self-lubricating surface, resistant to marks by pens, pencils, markers, and other writing instruments. 3. 1 inch thick with edges rounded to 1/4 inch radius.

C. Aluminum Extrusions: ASTM B221, 6463-T5 alloy and temper.

D. Stainless Steel: ASTM A167, Type 304.

2.3 HARDWARE

A. Hinges: 1. 8 inches long, fabricated from heavy-duty extruded aluminum with bright dip anodized fi nish, wrap- around fl anges, through bolted to doors and pilasters with stainless steel, Torx head sex bolts. 2. Hinges operate on fi eld-adjustable nylon cams, fi eld adjustable in 30 degree increments.

B. Door Strike and Keeper: 1. 6 inches long, fabricate from heavy-duty extruded aluminum with bright dip anodized fi nish, secured to pilasters with stainless steel tamper resistant Torx head sex bolts. 2. Bumper: Extruded black vinyl.

C. Latch and Housing: 1. Heavy-duty extruded aluminum. 2. Latch housing: Bright dip anodized fi nish. 3. Slide bolt and button: Black anodized fi nish.

D. Coat Hook/Bumper: 1. Combination type, chrome plated Zamak. 2. Equip outswing handicapped doors with second door pull and door stop.

E. Door Pulls: Chrome plated Zamak.

2.4 COMPONENTS

A. Doors and Dividing Panels: 55 inches high, mounted 14 inches above fi nished fl oor.

B. Pilasters: 82 inches high, fastened to 3 inch high pilaster sleeves with stainless steel tamper resistant Torx head sex bolt.

C. Pilaster Sleeves: 3 inches high, [one-piece molded HDPE,] [20 gage stainless steel,] secured to pilaster with stainless steel tamper resistant Torx head sex bolt.

D. Wall Brackets: 54 inches long, [Extruded PVC,] [heavy-duty aluminum, 1-1/2 inch stirrup type, bright dip anodized fi nish,] fastened to pilasters and panels with stainless steel tamper resistant Torx head sex bolts.

E. Headrail: Heavy-duty extruded aluminum, anti-grip design, integrated curtain track, clear anodized fi nish, fastened to headrail bracket with stainless steel tamper resistant Torx head sex bolt and at top of pilaster with stainless steel tamper resistant Torx head screws.

TM


Toilet Compartments & Screens | ResistallÂŽ Partitions | Specifications |

SPECIFICATIONS

Section 10 2116

F. Headrail Brackets: 20 gage stainless steel, satin fi nish, secured to wall with stainless steel tamper resistant Torx head screws.

PART 3 - EXECUTION 3.1 INSTALLATION

A. Install compartments in accordance with manufacturer’s instructions and approved Shop Drawings.

B. Install rigid, straight, plumb, and level.

C. Locate bottom edge of doors and panels 14 inches above fi nished fl oor.

D. Provide uniform, maximum 3/8 inch vertical clearance at doors.

E. Not Acceptable: Evidence of cutting, drilling, or patching.

3.2 ADJUSTING

A. Adjust doors and latches to operate correctly.


Vanities

Designed to be worry-free

VANITIES • Color matched to partitions • Impervious to moisture • Never delaminates • Fully power washable


Vanities Specifications & Drawings

SPECIFICATIONS & DRAWINGS


Vanities Specifications Vanities | Specifications & Drawings |

VANITIES

Solid Plastic Privacy Vanities Specifications - Section 06 6121

PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Solid plastic vanities. B. Related Sections: 1. Division 01: Administrative, procedural, and temporary work requirements.. 1.2 REFERENCES A. ASTM International (ASTM) (www.astm.org): 1. E84 - Standard Test Method for Surface Burning Characteristics of Building Materials. 2. B221 - Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes. 1.3 SUBMITTALS Limiting submittals to only those actually required helps to minimize liability arising from the review of submittals. Minimize submittals on smaller, less complex projects. Include the following for submission of shop drawings, product data, and samples for the Architect’s review. A. Submittals for Review: 1. Shop Drawings: Include dimensioned layout, elevations, and cutouts for plumbing and accessories. 2. Product Data: Manufacturer’s descriptive data. 3. Samples: [2 x 3] [__ x __] inch samples [showing available colors.] [in each color.] Include the following for submission of sustainable design submittals. B. Sustainable Design Submittals: 1. Recycled Content: Certify percentages of post-consumer and pre-consumer recycled content. 2. Regional Materials: Certify distance between manufacturer and Project and between manufacturer and extraction or harvest point in miles. 1.4 QUALITY ASSURANCE The following paragraphs specify minimum level of experience required of the parties performing the work of this section. Retain if required, and edit to suit project requirements. A. Manufacturer Qualifications: Minimum [5] [__] years experience in manufacture of solid plastic vanities with products in satisfactory use under similar service conditions. B. Installer Qualifications: Minimum [5] [__] years experience in work of this Section. 1.5 WARRANTIES A. Provide manufacturer’s 25 year warranty against breakage, corrosion, and delamination under normal conditions. PART 2 - PRODUCTS 2.1 MANUFACTURERS A. Contract Documents are based on products by Scranton Products. (www.scrantonproducts.com) Edit the following to indicate whether or not substitutions will be permitted for the products in this section. B. Substitutions: [Under provisions of Division 01.] [Not permitted.] 2.2 MATERIALS A. Solid Plastic Panels: 1. Solid Plastic, fabricated from polymer resins compounded under high pressure, forming single thickness panel.


Vanities | Specifications & Drawings |

VANITIES

Solid Plastic Privacy Vanities Specifications - Section 06 6121

2. Waterproof and nonabsorbent, with self-lubricating surface, resistant to marks by pens, pencils, markers, and other writing instruments. Verify current recycled content with Scranton Products. 3. Recycled content: Minimum [25] [__] percent. Edit the following to suit project requirements. 4. Color: [____.] [To be selected from manufacturer’s full color range.] B. Aluminum Extrusions: ASTM B221, 6463-T5 alloy and temper. 2.3 COMPONENTS A. Tops, Splashes, Skirts, and End and Center Supports: 1 inch thick with edges radiused to 1/4 inch. Edit the following to suit project requirements. Maximum vanity length for single piece is 120 inches. B. Vanity Size: 24 inches deep x [[__] inches long.] [length indicated on Drawings.] C. Shoes: 3 inches high, one piece molded HDPE. D. Attachment Brackets: 16 inches long, heavy duty extruded aluminum with bright dip anodized finish.

PART 3 - EXECUTION 3.1 INSTALLATION A. Install vanities in accordance with manufacturer’s instructions and approved Shop Drawings. B. Set plumb, level, rigid, and aligned. C. Attach vanities to supporting construction with anchors best suited to substrate conditions.


Vanities Drawings Vanities | Specifications & Drawings |

VANITIES

Standard Vanity

FRONT ELEVATION

FRONT ELEVATION

CENTER SUPPORT

END SUPPORT

SIDE ELEVATION

NOTES:

IN CORNER RIGHT

ALL VANITIES ARE MADE OUT OF 1” THICK MATERIAL (STD.) NOTES: 1. If the vanity length exceeds 140” please specify where the vanity should be split. The split location is not specified will Scranton products provide a split in the best position to our knowledge. 2. Scranton Products recommends that supports be spaced no greater than 36” O.C.

IN CORNER LEFT

BETWEEN WALL

FREE STANDING

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Vanities | Specifications & Drawings |

VANITIES

Standard Vanity With Kickplate

FRONT ELEVATION

FRONT ELEVATION

CENTER SUPPORT

END SUPPORT

SIDE ELEVATION

NOTES:

IN CORNER RIGHT

ALL VANITIES ARE MADE OUT OF 1” THICK MATERIAL (STD.) NOTES: 1. If the vanity length exceeds 140” please specify where the vanity should be split. The split location is not specified Scranton Products will provide a split in the best position to our knowledge. 2. Scranton Products recommends that supports be spaced no greater than 36” O.C.

IN CORNER LEFT

BETWEEN WALL

FREE STANDING

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Shower & Dressing Compartments

Designed to be worry-free

SHOWER & DRESSING COMPARTMENTS • Impervious to moisture • Maintenance free solutions • Never delaminates • Fully power washable


Shower & Dressing Compartments Specifications & Drawings

SPECIFICATIONS & DRAWINGS


Shower & Dressing Compartments Specifications Shower & Dressing Compartments | Specifications & Drawings |

SHOWER & DRESSING COMPARTMENTS

Solid Plastic Shower & Dressing Compartments Specifications - Section 10 2119

PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Solid plastic [shower] [and] [dressing] compartments. B. Related Sections: 1. Division 01: Administrative, procedural, and temporary work requirements. 1.2 REFERENCES A. ASTM International (ASTM): 1. B221 - Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes. 2. E84 - Standard Test Method for Surface Burning Characteristics of Building Materials. B. National Fire Protection Association (NFPA) 286 - Standard Methods of Fire Tests for Evaluating Contribution of Wall and Ceiling Interior Finish to Room Fire Growth. 1.3 SUBMITTALS A. Submittals for Review: 1. Shop Drawings: Include dimensioned layout, elevations, trim, closures, and accessories. 2. Product Data: Manufacturer’s descriptive data for panels, hardware, and accessories. 3. Samples: [2 x 3] [__ x __] inch samples [showing available colors.] [in each color.] B. Sustainable Design Submittals: 1. Recycled Content: Certify percentages of post-consumer and pre-consumer recycled content. 2. Regional Materials: Certify distance between manufacturer and Project and between manufacturer and extraction or harvest point in miles. 1.4 QUALITY ASSURANCE A. Manufacturer Qualifications: Minimum [5] [__] years experience in manufacture of solid plastic shower and dressing compartments with products in satisfactory use under similar service conditions. B. Installer Qualifications: Minimum [5] [__] years experience in work of this Section. 1.5 WARRANTIES A. Provide manufacturer’s 25 year warranty against breakage, corrosion, and delamination under normal conditions. PART 2 - PRODUCTS 2.1 MANUFACTURERS A. Contract Documents are based on products by Scranton Products. (www.scrantonproducts.com) B. Substitutions: [Under provisions of Division 01.] [Not permitted.]


Shower & Dressing Compartments | Specifications & Drawings |

SHOWER & DRESSING COMPARTMENTS

Solid Plastic Shower & Dressing Compartments Specifications - Section 10 2119

2.2 MATERIALS A. Doors, Panels and Pilasters: 1. Solid Plastic fabricated from polymer resins compounded under high pressure, forming single thickness panel. 2. Waterproof and nonabsorbent, with self-lubricating surface, resistant to marks by pens, pencils, markers, and other writing instruments. 3. 1 inch thick with radiused edges. 4. Fire hazard classification: Not required. **** OR **** 5. Fire hazard classification: Class [A] [B] flame spread/smoke developed rating, tested to ASTM E84. **** OR **** 6. Fire hazard classification: Pass NFPA 286. 7. Recycled content: Minimum [25] [__] percent. 8. Color: [____.] [To be selected from manufacturer’s full color range.] B. Aluminum Extrusions: ASTM B221, 6463-T5 alloy and temper. C. Shower Curtains: Vinyl, 42 inches wide x 72 inches high, hung with aluminum curtain hooks with selflubricating Delrin slides. 2.3 COMPONENTS A. Panels: 76 inches high, mounted to pilasters with continuous brackets and to panels with continuous extruded aluminum brackets or continuous extruded aluminum shower corner brackets. B. Pilasters: 82 inches high, fastened to panels with continuous brackets. C. Headrail: Heavy-duty extruded aluminum, anti-grip design, clear anodized finish, fastened to headrail brackets and top of pilaster using stainless steel tamper-resistant Torx head screws. D. Headrail Brackets: 20 gage stainless steel, secured using stainless steel tamper-resistant Torx head screws. E. Brackets: 76 inches long, extruded aluminum, clear anodized finish, attached using stainless steel tamperresistant Torx head screws. PART 3 - EXECUTION 3.1 INSTALLATION A. Install compartments in accordance with manufacturer’s instructions and approved Shop Drawings. B. Install rigid, straight, plumb, and level. C. Not Acceptable: Evidence of cutting, drilling, or patching.


Shower & Dressing Compartments Drawings Shower & Dressing Compartments | Specifications & Drawings |

Floor-Mounted overhead-Braced

8” Aluminum Wrap Around Hinge Continuous Aluminum Brackets With Door and Seat

STD FRONT ELEVATION

STD SIDE ELEVATION

Notes: 1. Upon approval of these drawings, this order shall be scheduled for fabrication. 2. where pilasters and panels meet there is a 1/2” space. 3. where pilasters and/or panels meet a wall there is a 1” space. 4. headrail shall be cut 2” longer than the overall dimension and cut to size in the field by the installer.

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Shower & Dressing Compartments | Specifications & Drawings |

Floor-Mounted overhead-Braced

Continuous Aluminum Brackets Without Doors Shown With Seat

Notes: • Headrail can be used as a shower curtain rod • Shower Curtains will only be supplied if they were quoted

STD FRONT ELEVATION

STD SIDE ELEVATION

Notes: 1. Upon approval of these drawings, this order shall be scheduled for fabrication. 2. where pilasters and panels meet there is a 1/2” space. 3. where pilasters and/or panels meet a wall there is a 1” space. 4. headrail shall be cut 2” longer than the overall dimension and cut to size in the field by the installer.

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Shower & Dressing Compartments | Specifications & Drawings |

Floor-Mounted overhead-Braced

Continuous Aluminum Brackets Shown Without Doors - Wide Pilaster

Notes: • Headrail can be used as a shower curtain rod • Shower Curtains will only be supplied if they were quoted

STD FRONT ELEVATION

STD SIDE ELEVATION

Notes: 1. Upon approval of these drawings, this order shall be scheduled for fabrication. 2. where pilasters and panels meet there is a 1/2” space. 3. where pilasters and/or panels meet a wall there is a 1” space. 4. headrail shall be cut 2” longer than the overall dimension and cut to size in the field by the installer.

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Shower & Dressing Compartments | Specifications & Drawings |

Floor-Mounted overhead-Braced

Continuous Aluminum Brackets Without Doors - Narrow Pilaster

Notes: • Headrail can be used as a shower curtain rod • Shower Curtains will only be supplied if they were quoted

STD FRONT SHOWER ELEVATION

STD SIDE ELEVATION

Notes: 1. Upon approval of these drawings, this order shall be scheduled for fabrication. 2. Where pilasters and panels meet there is a 1/2” space. 3. Where pilasters and/or panels meet a wall there is a 1” space. 4. headrail shall be cut 2” longer than the overall dimension, and cut to size in the field by the installer.

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Shower & Dressing Compartments | Specifications & Drawings |

FLOOR TO CEILING

8” Aluminum Wrap Around Hinge Continuous Aluminum Brackets With Door and Seat

Notes: • FLOOR TO CEILING • CONTINUOUS BRACKETS • 8” ALUMINUM WRAP AROUND HINGE • Shower Curtains will only be supplied if they were quoted

STD FRONT ELEVATION

STD SIDE ELEVATION

Notes: 1. Upon approval of these drawings, this order shall be scheduled for fabrication. 2. Where pilasters and panels meet there is a 1/2” space. 3. Where pilasters and/or panels meet a wall there is a 1” space. 4. headrail shall be cut 2” longer than the overall dimension, and cut to size in the field by the installer.

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Shower & Dressing Compartments | Specifications & Drawings |

FLOOR TO CEILING

Continuous Aluminum Brackets Without Doors Shown With Seat

Notes: • FLOOR TO CEILING • CONTINUOUS BRACKETS • Shower Curtains will only be supplied if they were quoted

STD FRONT ELEVATION

STD SIDE ELEVATION

Notes: 1. Upon approval of these drawings, this order shall be scheduled for fabrication. 2. Where pilasters and panels meet there is a 1/2” space. 3. Where pilasters and/or panels meet a wall there is a 1” space. 4. headrail shall be cut 2” longer than the overall dimension, and cut to size in the field by the installer.

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Shower & Dressing Compartments | Specifications & Drawings |

FLOOR TO CEILING

Continuous Aluminum Brackets Without Doors - Wide Pilaster

Notes: 1. no shower hooks will supplied unless specified for all shower compartment openings. shower curtains will be supplied only when quoted with the order.

STD FRONT ELEVATION

STD SIDE ELEVATION

Notes: 1. Upon approval of these drawings, this order shall be scheduled for fabrication. 2. where pilasters and panels meet there is a 1/2” space. 3. where pilasters and/or panels meet a wall there is a 1” space. 4. headrail shall be cut 2” longer than the overall dimension and cut to size in the field by the installer.

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Shower & Dressing Compartments | Specifications & Drawings |

FLOOR TO CEILING

Continuous Aluminum Brackets With Doors - Narrow Pilaster

Notes: • Shower Curtains will only be supplied if they were quoted

STD FRONT ELEVATION

STD SIDE ELEVATION

Notes: 1. Upon approval of these drawings, this order shall be scheduled for fabrication. 2. Where pilasters and panels meet there is a 1/2” space. 3. Where pilasters and/or panels meet a wall there is a 1” space. 4. headrail shall be cut 2” longer than the overall dimension, and cut to size in the field by the installer.

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Shower & Dressing Compartments | Specifications & Drawings |

SEATS

Seat Standard Configuration

PLAN ELEVATION

NOTES: STD SHOWER SEAT ELEVATION

SEAT SUPPORT

1. Seats/Shelves are made of 1” plastic. 2. 4” L Brackets will be supplied for seat attachments. 3. Use 3/4” Torx screws at all plastic connections & 1 1/2” w/ anchors at wall 4. Shower seat/shelves length will be the exact clear dimension. If needed, cut in the field to fit & notch around brackets unless otherwise noted on shop drawing.

“L” BRACKET

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Shower & Dressing Compartments | Specifications & Drawings |

SEATS

Seat With End Support

PLAN ELEVATION

NOTES: STD SHOWER SEAT ELEVATION

SEAT SUPPORT

1. Seats/Shelves are made of 1” plastic. 2. 4” L Brackets will be supplied for seat attachments. 3. Use 3/4” Torx screws at all plastic connections & 1 1/2” w/ anchors at wall 4. Shower seat/shelves length will be the exact clear dimension. If needed, cut in the field to fit & notch around brackets unless otherwise noted on shop drawing.

“L” BRACKET

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Shower & Dressing Compartments | Specifications & Drawings |

SHELF

Shelf Standard Configuration

STD. SHOWER SHELF ELEVATION

PLASTIC SUPPORT

“L” BRACKET

NOTES:

NOTES:

1. Seats/Shelves are made of 1” plastic. 2. 4” L Brackets will be supplied for seat attachments. 3. Use 3/4” Torx screws at all plastic connections & 1 1/2” w/ anchors at wall 4. Shower seat/shelves length will be the exact clear dimension. If needed, cut in the field to fit & notch around brackets unless otherwise noted on shop drawing.

1. Doors large than 30” are to be set to the closed position. 2. Where pilasters and panels meet there is a 1/2” space. 3. Where pilasters and/or panels meet a wall there is a 1” space. 4. Headrail shall be cut 2” longer than the overall dimension, and cut to size in the field by the installer.

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Lockers

Where solid construction meets rigid good looks

LOCKERS • Maintenance Free • Impact & Dent Resistant • Graffiti Resistant • Will never rust corrode or delaminate


Tufftec Lockers

TUFFTEC LOCKERS® Locker solutions for every place and purpose • Customizable • Solid classic construction • Versatile configurations & storage solutions • Industry leading 25 year warranty


Tufftec Lockers Case Study

CASE STUDY

Collins Sports & Fitness Center Installs Lockers For A Tough Crowd

The Collins Perley Sports & Fitness Center in St. Albans, VT, is owned by the local public high school and was built in the mid 1980s as their primary athletic and physical education facility. It is run as both a school and community facility with more than 25 high school sports teams, 12 daily physical education classes and a semi-pro soccer team. In the past few months, the center has been renovating its locker room and restroom facilities, where the traditional metal was taking some abuse. Most of the center’s public use is fee-based and is critical to the center’s financial stability, though keeping costs low is also important to its community image. According to Dave Kimel, facility manager, the center has been slowly renovating a few rooms at a time, as funds have allowed.

“We shopped hard for our locker and restroom products, comparing quality, price and reputation for service and Scranton Products stood out above the rest,” said Kimel. “They were the most highly recommended by the best installation company we could find in the state of Vermont.” Collins Perley Sports & Fitness Center Tufftec Hunter Green Lockers

The center gets about 600,000 user visits to its facility each year, about 400,000 of which are unrelated to school functions. “That's a lot of swinging and banging on toilet stall doors and slamming of locker room doors, said Kimel, “so wear and tear is important.” He said most of the old metal lockers still worked but they looked old and got absolutely no respect from the school kids. “We had constant problems with scratching and graffiti,” said Kimel. “Since we put these new Tufftec® lockers in we have not had a single incident of damage.”

www.scrantonproducts..com ● 800.445.5148 ● info@scrantonproducts.com


CASE STUDY

Considering the traffic Collins Perley endures, the lockers and stalls needed to be high quality and extremely durable. “One of the key reasons for choosing Scranton Products’ shower partition and locker products was the overall value,” said Kimel. “We're a public high school and money is tight but a good product is not the cheapest, it’s the best value and performance over time,” he said. “The facility amenities also have to look great--the better they look the more memberships we'll sell and the more our kids will respect and take care of our facility.” Kimel said another important feature for the locker rooms is sanitation, with one locker having three or four different users per day. “In a public facility there is nothing more important that cleanliness,” he explained. “These HDPE lockers and partitions have no cracks, crevices, or edges to catch cleaning cloths or trap mold, mildew, and other bacteria and they’re easy to clean.” He also finds they pay off from a lifecycle perspective and after three years for some of the shower and locker products, they all look as good as the day they were installed. “Every hinge, every latch, every “These HDPE lockers and partitions hanger works as well today as it did three years ago,” have no cracks, crevices, or edges to he said, “so we’ll continue catch cleaning cloths or trap mold, to have more installed.”

mildew, and other bacteria and they’re easy to clean,” said Kimel.

He noted that back in the 80s, gang showers were fine for most high school gym classes. But with the multi-use facility, Kimel has seen that change with more demands for privacy. “Scranton Products came up with a simple, clean, great looking, and inexpensive way to convert one side of our gang showers to individual showers at very low cost,” he said. “And my crew finds them very easy to clean." Along with serving as the home for numerous sports teams, the center has seen a significant increase in paid memberships over the past three years. “We attribute that in large part to the way our locker rooms now look and feel; they are the customers' first and last impression of their visits here.” According to Kimel, if you compare a sports and health facility to a house tour, the locker room is as important as a kitchen or bathroom--the two most important rooms when appraising value. “I can get by with an older model treadmill but I better not have rusted lockers," he said.


Tufftec Lockers Specifications & Drawings

SPECIFICATIONS & DRAWINGS


Tufftec Lockers Specifications Tufftec Lockers® | Specifications & Drawings

TUFFTEC LOCKERS®

Solid Plastic Lockers Specifications - Section 10 5126

PART 1 - GENERAL 1.1

SUMMARY A. Section Includes: 1. Solid plastic lockers. 2. Locker benches. B. Related Sections: 1. Division 01: Administrative, procedural, and temporary work requirements..

1.2 SUBMITTALS A. Submittals for Review: 1. Shop Drawings: Include dimensioned layout, elevations, trim, closures, and accessories. 2. Product Data: Manufacturer’s descriptive data. 3. Samples: [2 x 3] [__ x __] inch samples [showing available colors.] [in each color.] B. Sustainable Design Submittals: 1. Recycled Content: Certify percentages of post-consumer and pre-consumer recycled content. 2. Regional Materials: Certify distance between manufacturer and Project and between manufacturer and extraction or harvest point in miles. 1.3 QUALITY ASSURANCE A. Manufacturer Qualifications: Minimum [5] [__] years experience in manufacture of solid plastic lockers with products in satisfactory use under similar service conditions. B. Installer Qualifications: Minimum [5] [__] years experience in work of this Section. 1.4 WARRANTIES A. Provide manufacturer’s 25 year warranty against breakage, corrosion, and delamination under normal conditions. PART 2 - PRODUCTS 2.1 MANUFACTURERS A. Contract Documents are based on products by Scranton Products. (www.scrantonproducts.com) B. Substitutions: [Under provisions of Division 01.] [Not permitted.] 2.2 MATERIALS A. Solid Plastic Panels: 1. Lockers: a. Solid plastic formed under high pressure into solid plastic components with homogeneous color throughout, with smooth orange peel finish. b. Edges machined to accept assembly brackets. 2. Locker benches: a. Solid plastic fabricated from polymer resins compounded under high pressure, forming single thickness panel. b. Waterproof and nonabsorbent, with self-lubricating surface, resistant to marks by pens, pencils, markers, and other writing instruments. 3. Recycled content: Minimum [25] [__] percent. 4. Color: [____.] [To be selected from manufacturer’s full color range.]


Tufftec Lockers® | Specifications & Drawings

TUFFTEC LOCKERS®

Solid Plastic Lockers Specifications - Section 10 5126

2.3 COMPONENTS - LOCKERS A. Locker Doors and Frames: 1/2 inch thick. B. Sides, Tops, Bottoms, Backs, and Shelves: 3/8 inch thick. C. Latch: Continuous type, manufactured from HDPE, capable of accepting various locking mechanisms, fastened to entire length of door. D. Door Hinge: Heavy duty extruded aluminum, full length, assembled onto door and locker front. E. Assembly Profile: Full height of lockers, PVC plastic, snap fit assembled onto locker sides. F. Coat Hooks: Two-prong, high impact plastic, mounted to bottom of shelf or divider, one per door opening. 2.4 COMPONENTS - LOCKER BENCHES A. Bench Tops: 1-1/2 inch thick with edges rounded to 1/4 inch radius, 9-1/2 inches wide x [[__] inches long.] [lengths indicated.] B. Pedestals: [Steel, 16-1/4 inches high,] [Aluminum, 16 inches high,] secured to tops with stainless steel tamper resistant Torx head screws and to floor with lead expansion shields and 2 inch long stainless steel machine bolts. 2.5 FABRICATION A. Fabricate locker components square and rigid, finish free from scratches and chips. B. Fabricate locker components for snap-together assembly or slide-together dovetail conections providing solid and secure, anti-racking construction. C. Fabricate adjacent lockers with common side panel. D. Fabricate locker units for assembly in maximum of three adjacent lockers. E. Fabricate locker benches to sizes indicated in single lengths. PART 3 EXECUTION 3.1 INSTALLATION A. Install lockers in accordance with manufacturer’s instructions and approved Shop Drawings. B. [Set lockers directly on floor.] [Set lockers on prepared locker base.] C. Set plumb, level, rigid, and aligned. D. Attach lockers to supporting construction with anchors best suited to substrate conditions. E. Attach locker benches to floor. 3.2 ADJUSTING A. Adjust doors and latches to operate correctly.

TM


Tufftec Lockers Drawings Tufftec Lockers速 | Specifications & Drawings

TIERS & DOORS OPTIONS TIERS

1-6 Tiers

DOOR VENTING OPTIONS

Horizontal Lattice Mesh Full Full Lattice Full Full Full Mesh Horizontal Horizontal Horizontal Lattice Lattice Mesh Lattice Mesh Mesh Lattice Lattice Lattice Mesh Mesh Horizontal Lattice Mesh Mesh Lattice Mesh

1 - 6 Tier

NOTES: 1. Most lockers are available in banks of 1, 2, and 3.

SPECIALTY STYLE OPTIONS

Z-Locker

Athletic (open locker no door)

Z Locker

Utility (open locker no door)

Cubbies (open locker no door)

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. Custom Configurations are available. (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.

FullFull Lattice Full Full Full Mesh Side Lattice Mesh Lattice Lattice Mesh Mesh Lattice Mesh Venting Side Venting Side Side Venting Venting Side Venting


Tufftec Lockers® | Specifications & Drawings

SPECIALTY STYLE OPTIONS

Bases, Fillers, Hooks, Handles, Hinges, Locks and Tops

TOPS Slope

LOCKER BASE 4” high black base, 1” thick. Bases are assembled in the field

Flat

HANDLE

FILLERS

LOCK OPTIONS

Ergonomic handle, designed to meet ADA code compliance

4”, 8”, 12”, 18” widths

Tufftec Locker® systems support a variety of locking options, including:

72” height

Padlock

ENGRAVING

Key

Digi Lock In-Door Combination Lock

ADA COMPLIANCE PACKAGE

HOOKS Metal j-hook

Coin Key

Double-prong black coat hook

ADA compliant conversion kits available with ADA plaques, adjustable shelves and clips.

Custom engraving of GarmentDouble Bar Hook Single Prong Hook Prong Hook Double Prong Hook team logos and otherSingle Prong symbols available in one-color or two-color options.

PLASTIC BENCHES

HINGE

1 1/2” thick plastic benches to match color locker selections.

Heavy duty extruded aluminum with corrosionfree stainless steel pin for years of superior corrosion free performance. Available in silver and black.

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. Custom Configurations are available. (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder. TM


Tufftec Benches

TUFFTEC BENCHES TM

Locker solutions for every place and purpose • Built from 1 1/2” solid plastic • Color matched to your lockers • Versatile configurations • Extremely durable


Tufftec Benches Specifications & Drawings

SPECIFICATIONS & DRAWINGS


Tufftec Benches Specifications TufftecTM Benches |

TUFFTEC LOCKERS® & BENCHES Solid Plastic Lockers Specifications - Section 10 5126

PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Solid plastic lockers. 2. Locker benches. B. Related Sections: 1. Division 01: Administrative, procedural, and temporary work requirements.. 1.2 SUBMITTALS A. Submittals for Review: 1. Shop Drawings: Include dimensioned layout, elevations, trim, closures, and accessories. 2. Product Data: Manufacturer’s descriptive data. 3. Samples: [3 x 3] [__ x __] inch samples [showing available colors.] [in each color.] B. Sustainable Design Submittals: 1. Recycled Content: Certify percentages of post-consumer and pre-consumer recycled content. 2. Regional Materials: Certify distance between manufacturer and Project and between manufacturer and extraction or harvest point in miles. 1.3 QUALITY ASSURANCE A. Manufacturer Qualifications: Minimum [5] [__] years experience in manufacture of solid plastic lockers with products in satisfactory use under similar service conditions. B. Installer Qualifications: Minimum [5] [__] years experience in work of this Section. 1.4 WARRANTIES A. Provide manufacturer’s 25 year warranty against breakage, corrosion, and delamination under normal conditions. PART 2 - PRODUCTS 2.1 MANUFACTURERS A. Contract Documents are based on products by Scranton Products. (www.scrantonproducts.com) B. Substitutions: [Under provisions of Division 01.] [Not permitted.] 2.2 MATERIALS A. Solid Plastic Panels: 1. Lockers: a. Solid plastic formed under high pressure into solid plastic components with homogeneous color throughout, with smooth orange peel finish. b. Edges machined to accept assembly brackets. 2. Locker benches: a. Solid plastic fabricated from polymer resins compounded under high pressure, forming single thickness panel. b. Waterproof and nonabsorbent, with self-lubricating surface, resistant to marks by pens, pencils, markers, and other writing instruments. 3. Recycled content: Minimum [25] [__] percent. 4. Color: [____.] [To be selected from manufacturer’s full color range.]


TufftecTM Benches |

TUFFTEC LOCKERSÂŽ & BENCHES Solid Plastic Lockers Specifications - Section 10 5126

2.3 COMPONENTS - LOCKERS A. Locker Doors and Frames: 1/2 inch thick. B. Sides, Tops, Bottoms, Backs, and Shelves: 3/8 inch thick. C. Latch: Continuous type, manufactured from HDPE, capable of accepting various locking mechanisms, fastened to entire length of door. D. Door Hinge: Heavy duty extruded aluminum, full length, assembled onto door and locker front. E. Assembly Profile: Full height of lockers, PVC plastic, snap fit assembled onto locker sides. F. Coat Hooks: Two-prong, high impact plastic, mounted to bottom of shelf or divider, one per door opening. 2.4 COMPONENTS - LOCKER BENCHES A. Bench Tops: 1-1/2 inch thick with edges rounded to 1/4 inch radius, 9-1/2 inches wide x [[__] inches long.] [lengths indicated.] B. Pedestals: [Steel, 16-1/4 inches high,] [Aluminum, 16 inches high,] secured to tops with stainless steel tamper resistant Torx head screws and to floor with lead expansion shields and 2 inch long stainless steel machine bolts. 2.5 FABRICATION A. Fabricate locker components square and rigid, finish free from scratches and chips. B. Fabricate locker components for snap-together assembly or slide-together dovetail conections providing solid and secure, anti-racking construction. C. Fabricate adjacent lockers with common side panel. D. Fabricate locker units for assembly in maximum of three adjacent lockers. E. Fabricate locker benches to sizes indicated in single lengths. PART 3 - EXECUTION 3.1 INSTALLATION A. Install lockers in accordance with manufacturer’s instructions and approved Shop Drawings. B. [Set lockers directly on floor.] [Set lockers on prepared locker base.] C. Set plumb, level, rigid, and aligned. D. Attach lockers to supporting construction with anchors best suited to substrate conditions. E. Attach locker benches to floor. 3.2 ADJUSTING A. Adjust doors and latches to operate correctly.

TM


Tufftec Benches Drawings TufftecTM Benches | Specifications & Drawings

TUFFTECTM DRAWINGS

Benches

PLAN VIEW

ELEVATION

ALUMINUM

STEEL

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. Custom Configurations are available. (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Duralife Lockers

DURALIFE LOCKERS

TM

Built for the long hall • NFPA 286 fire rating compliant • Competitively priced • Recessed handle • 15 Year Warranty


Duralife Lockers Case Study

CASE STUDY

Duralife Lockers Provided Solution for Ocean City High School

PHOTO HERE

Located near the shore in Ocean City, NJ, Ocean City High School wanted to avoid all the maintenance issues associates with corrosion, when building their new school. In the 7 years since the lockers were installed, there have been no reports of locker break-ins, no doors have required replacements, there has been no noticeable scratching, and graffiti can be quickly and easily wiped off.

Job Photo Here

Robert Gannon Director of Facilities at Ocean City High School in New Jersey

“Maintaining metal lockers was a nightmare. With plastic lockers, we cut our maintenance time from 3-4 weeks to just 2-3 days, and cleaning graffiti from days to minutes. I couldn’t be happier,” said Robert Gannon, Director of Facilities at Ocean City High School in New Jersey. Scranton Products premium brands have led the HDPE plastic market, setting new benchmarks for the industry for quality and innovation. Together, the brands of Scranton Products offer the most comprehensive and trusted line of products in the industry. Scranton Products boasts more than 28 years of experience in designing products – lockers, bathroom partitions, shower stalls and dressing compartments. In comparison to other locker options for hallway corridors, Duralife lockers have shown to be the most durable, lowmaintenance in the industry. These inventive options are designed to be worry-free and are built to last. Duralife lockers have proven to withstand the test of time – especially with school age children.

www.scrantonproducts.com ● 800.445.5148 ● info@scrantonproducts.com


Duralife Lockers Specifications & Drawings

SPECIFICATIONS & DRAWINGS


Duralife Lockers Specifications Duralife LockersTM | Specifications & Drawings |

DURALIFE LOCKERSTM

Solid Plastic Lockers Specifications - Section 10 5126

PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Solid plastic lockers. B. Related Sections: 1. Division 01: Administrative, procedural, and temporary work requirements. 1.2 REFERENCES A. National Fire Protection Association (NFPA) 286 - Standard Methods of Fire Tests for Evaluating Contribution of Wall and Ceiling Interior Finish to Room Fire Growth. 1.3 SUBMITTALS A. Submittals for Review: 1. Shop Drawings: Include dimensioned layout, elevations, trim, closures, and accessories. 2. Product Data: Manufacturer’s descriptive data. 3. Samples: [2 x 3] [__ x __] inch samples [showing available colors.] [in each color.] B. Sustainable Design Submittals: 1. Recycled Content: Certify percentages of post-consumer and pre-consumer recycled content. 2. Regional Materials: Certify distance between manufacturer and Project and between manufacturer and extraction or harvest point in miles. 1.4 QUALITY ASSURANCE A. Manufacturer Qualifications: Minimum [5] [__] years experience in manufacture of solid plastic lockers with products in satisfactory use under similar service conditions. B. Installer Qualifications: Minimum [5] [__] years experience in work of this Section. 1.5 WARRANTIES A. Provide manufacturer’s 15 year warranty against breakage, corrosion, and delamination under normal conditions. PART 2 - PRODUCTS 2.1 MANUFACTURERS A. Contract Documents are based on products by Scranton Products. (www.scrantonproducts.com) B. Substitutions: [Under provisions of Division 01.] [Not permitted.] 2.2 MATERIALS A. Solid Plastic Panels: 1. Sold Plastc formed under high pressure into solid plastic components with homogeneous color throughout, with smooth orange peel finish. 2. Edges machined to accept assembly brackets. 3. Recycled content: Minimum [25] [__] percent. 4. Color: [____.] [To be selected from manufacturer’s full color range.]

TM


Duralife LockersTM | Specifications & Drawings |

DURALIFE LOCKERSTM

Solid Plastic Lockers Specifications - Section 10 5126

2.3 COMPONENTS A. Locker Doors: 1/2 inch thick. B. Sides, Tops, Bottoms, Backs, and Shelves: 3/8 inch thick. C. Latch: Continuous type, manufactured from HDPE, capable of accepting various locking mechanisms, fastened to entire length of door. D. Door Hinge: Heavy duty zinc-plated steel, full length, assembled onto door and locker front. E. Assembly: Tongue-and-groove joint construction using 3/8 inch thick HDPE, full height of locker. F. Coat Hooks: Two-prong, high impact plastic, mounted to bottom of shelf or divider, one per door opening. 2.4 FABRICATION A. Fabricate locker components square and rigid, finish free from scratches and chips. B. Fabricate locker components for snap-together assembly or slide-together dovetail conections providing solid and secure, anti-racking construction. C. Fabricate adjacent lockers with common side panel. D. Fabricate locker units for assembly in maximum of three adjacent lockers. PART 3 - EXECUTION 3.1 INSTALLATION A. Install lockers in accordance with manufacturer’s instructions and approved Shop Drawings. B. [Set lockers directly on floor.] [Set lockers on prepared locker base.] C. Set plumb, level, rigid, and aligned. D. Attach lockers to supporting construction with anchors best suited to substrate conditions. 3.2 ADJUSTING A. Adjust doors and latches to operate correctly.

TM


Duralife Lockers Drawings Duralife LockersTM | Specifications & Drawings |

DESIGN OPTIONS

FLAT TOP

1 Continuous strike

Fully integrated ½â€? thick HDPE 6-point strike for improved locking performance and security 2 Latch

6-point push-to-close latch made of extremely durable HDPE 3 Lock

Fully compatible with most standard and recessed combination locks

TRIM

4 Door

Full-height solid HDPE door with standard ventilation

SLOPE TOP

5 3

5 Frame

Solid HDPE tongue and groove construction with corrosion resistant mechanical fasteners

2 1 4

6 Hinge

Full-height anodized steel piano hinge

6

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. Custom Configurations are available. (Drawings are not to scale)

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.

TM


Duralife LockersTM | Specifications & Drawings |

STANDARD & OPTIONAL DESIGN OPTIONS STANDARD OFFERINGS VENTING

SHELF

COAT HOOK

HINGE

Arc venting for improved styling

Plastic shelf located 12” from the top (standard with 1 Tier locker)

Metal j-hook

Silver anodized steel continuous hinge

TIERS

DIMENSIONS

One or Two

Width 12”, 15” Depth 12”, 15”, 18” Height 60”, 72”

Single Prong Hook

Double Prong H

NOTES: 1. Most lockers are available in banks of 1, 2, and 3.

OPTIONAL OFFERINGS LOCKS

TOPS & TRIM

FILLERS

LOCKER BASE

#1 Combo

Slope

4”, 8”, 12”, 18” widths

4” high black base, 1” thick. Bases are assembled in the field

Hasp

Flat 72” height Trim

COAT HOOK Double-prong black coat hook

Double Prong Hook

NOTE: Job-Specific Specifications for all orders are located on shop drawing layouts. Custom Configurations are available. (Drawings are not to scale)

TM

Drawings for all configuration options are available at www. scrantonproducts.com and on the memory stick attatched to the binder.


Duralife Lockers Fire Rated Materials

FIRE RATED MATERIALS


Duralife LockersTM | Fire Rated Materials |

FIRE RATED DURALIFE LOCKERSTM

Scranton Products offers its full product line in a variety of fire rating options. To meet your fire rating need, simply indicate what fire rating you desire when specifying or quoting the job and the correct fire rated material will be used. Scranton Products currently offers standard, Class B, Class A and NFPA286 complaint materials. These are the relevant fire ratings for our classification of products. For additional information, contact your Scranton Products representative.

TM


Scranton Products Contact Information General Information |

SCRANTON PRODUCTS速

Contact Information

Contact Information 801 E. Corey Street Scranton, PA 18505 800.445.5148 Fax: 800.551.6993 info@scrantonproducts.com scrantonproducts.com

TM


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.