3100 Waterproofing & Insulation

VEGETATIVE ROOFING COMPONENTS

3100

CONDUCTIVE MEDIUM, WATERPROOFING Series # & INSULATION

CONDUCTIVE MEDIUM: HG 3111 - SST V

S

LIQUID/FLUID APPLIED MEMBRANES: HG 3120 - H R A HG 3130 - C R R HG 3140 - E M B HG 3150 - S A R THERMOPLASTIC MEMBRANES: HG 3160 - P C

-U

(PVC)

GEOFOAM INSULATION: HG 3191 - U G HG 3192 - L G HG 3193 - E G HG 3194 - S -I G HG 3195 - I G HG 3196 - P G HG 3197 - V G

Our waterproof membrane systems provide durability, flexibility, root resistance, compatibility with leak detection & prevention systems; as well as ease of installation. What differentiates us from all other complete green roofing solutions is that we provide total system warranties that allow for ponding water. This enables our roofs to become stormwater capturing systems.

If additional load is desired for a blue or vegetated roof, there may be additional costs required to achieve the necessary structural capacities to proceed with the project. Through our research partnerships, we’ve developed a means to help control additional structural costs by utilizing Geofoam insulation in areas where depth is necessary but there is a restrictive weight capacity.

H HG 3100 05/18

G www.hanging-gardens.com

Page 1 of 1

VEGETATIVE ROOFING COMPONENTS CONDUCTIVE MEDIUM Stainless Steel Vector Screening

Product #

3111

Our Stainless Steel Vector Screening is a specially selected grid that serves as a patented conductive medium when used with waterproofing systems that incorporate Electric Field Vector Mapping (EFVM) leak detection systems.

Specific to this product, it: enhances the overall effectiveness of the EFVM test procedure by placing the conductive medium as close to the waterproofing membrane as possible creates an electrical potential difference between a non-conductive membrane surface and itself is durable and will not rust will only be electrified during the EFVM leak detection test and therefore is not subject to code requirements

Tiered pricing based on product quantity

642.33 ft2 per Roll

TECHNICAL DATA Materials: • Stainless Steel T304 Material Thickness: • 24 GA Mesh Dimensions (W x L): • 2” x 2” Roll Dimensions (W x L): • 3’ 11” x 164’ Roll Weight: • 0.04 lbs. / ft2 Opening Area: • 95%

HG 3111 05/18

Installation Requirements: • Install SST Vector Screening directly below the waterproofing membrane • Overlap grid a minimum of 2 inches • Tape adjacent rolls together using duct tape spaced approximately 5 feet on center to prevent shifting • Terminate approximately 1 inch from projections and interior drain bodies • SST Vector Screening is to cover total waterproofing area, from inside of perimeter to inside of perimeter • Cut as close as possible to the perpendicular strand at both end and side edges

www.hanging-gardens.com

Page 1 of 1

VEGETATIVE ROOFING COMPONENTS WATERPROOFING Hot Rubberized Asphalt

Product #

3120

Our Hot Rubberized Asphalt system is a fully-adhered monolithic waterproofing, without seams or joints. The system is reinforced with a polyester fabric for extra toughness and redundancy. Our Hot Rubberized Asphalt system: withstands constant water immersion and hydrostatic pressure provides long-term physical stability in an environment of water, fertilizers, chlorides, and mild acids is high abuse resistant and has self-healing properties in moderately warm temperatures (> 60o F) can be applied in cold weather (to 0o F) on a frost-free surface is unaffected by adverse weather immediately after installation, due to its tenacious bond to the substrate has a fast, one coat application, allowing it to be protected and open to other trades in minutes

Tiered pricing based on product quantity

30 lb. Box covers 17.64 ft2 at 215 mils. thick 75 Boxes per Pallet

TECHNICAL DATA Hot Polymeric Waterproofing: Toughness: • 11.7 J Ratio of Toughness to Peak Load: • 0.059 J / N Adhesion: • 1.2 Water Vapor Permeability: • 0.18 ng/Pa.m2.s Crack Bridging Capacity: • No cracking, adhesion loss, or splitting Low Flexibility Temperature: • No cracking, delamination, or adhesion loss Viscosity: • 4 Sec. HG 3120 05/18

Uncured Neoprene Flashing Sheet: Thickness (ASTM D 751): • 60 mils.

Tensile Strength (ASTM D 412): • 1887 lbs. / in2 Elongation, Ultimate (ASTM D 412): • 305% Tear Resistance (ASTM D 624): • 136 lbs. / in2 Brittleness Point (ASTM D 746): • No breaks at -40o F Flame Resistance (ASTM C 542): • Pass Ozone Resistance Condition after Exposure: • No cracks at 7x magnification www.hanging-gardens.com

Page 1 of 1

VEGETATIVE ROOFING COMPONENTS WATERPROOFING Cold Reinforced Rubber

Product #

3130

Our Cold Applied, Reinforced Rubber Modified system is a fully-adhered monolithic waterproofing assembly comprised of reinforcement sheet and adhesive primers.

The system is designed as a cold-applied alternative to our Hot Rubberized Asphalt system, on projects where melters are impractical. Our Cold Reinforced Rubber system: prevents the passage of liquid water between the membrane and concrete substrates under dynamic, static, continuous, or intermittent hydrostatic pressure is an “all season” system that can be installed anytime between 0o F and 100o F as a cold process, unheated application resists deteriation from common identified chemical exposure and resists root penetration is engineered to be installed on fresh “green” concrete, eliminating typical 28 day curing periods and the expense of curing agents can be applied quickly, with high quality results, in a wider range of circumstances than other options

Tiered pricing based on product quantity

48 lb. Roll covers 200 ft2 at 50 mils. thick 30 Rolls per Pallet

TECHNICAL DATA 2 Ply System: Breaking Strength (ASTM D 146): • 89 lbf / in (Machine Direction) • 70 lbf / in (Transverse Direction) Elongation (ASTM D 146): • 46% (Machine Direction) • 64% (Transverse Direction) Puncture Strength (ASTM E 154): • 202 lbf Tear Strength (ASTM D 1004): • 25 lbf (Machine Direction) • 23 lbf (Transverse Direction) Hydrostatic Resistance (ASTM D 751): • 250 lbs. / in2 Water Vapor Transmission (ASTM E 96): • 0.04 perms HG 3130 05/18

Adhesion Strength (ASTM C 836): • 1.5 lbf / in Wind Uplift Resistance: • 200 lbs. / ft2 Low Temperature Crack Bridging: (ASTM C 1305): • Passes at -15o F Primer Adhesive: Solids Content (ASTM C 1250): • 77% Softening Point (ASTM D 36): • 220o F Penetration, 100g @ 77o F (ASTM D 5): • 162 dmm VOC Content: • < 230 g / L www.hanging-gardens.com

Page 1 of 1

VEGETATIVE ROOFING COMPONENTS WATERPROOFING

Elastomeric Modified Built-Up

Product #

3140

Our Elastomeric Modified Built-Up waterproofing system offers the elastomeric properties of singly ply systems with the time proven redundancy and abuse resistance of BuiltUp roofing technology. Our Elastomeric Modified Built-Up system: combines SEBS rubber polymer with a highly select grade of unoxidized asphalt to produce a waterproofing material with exceptional self-healing properties, excellent toughness, tenacity, adhesion, fatigue resistance, and flexibility especially at cold temperatures provides superior performance and durability, even in the presence of ponded water and severe climate variations due to encapsulation of the asphalt in the polymer matrix has self-healing properties in moderately warm temperatures (> 60o F) that allow it to absorb stress, recover, and form a seal around a puncture is commonly known as the “bullet-proof roof”, a fourply configuration is the toughest roof available and can literally stop a 22 caliber speeding bullet has reduced odor due to the polymer content; odor masking products are also available

Tiered pricing based on product quantity

50 lb. Carton covers ~100 ft2 / interply mopping 50 lb. Carton covers ~125 ft2 / glaze coating 50 lb. Carton covers ~83 ft2 / flood coat for surfacing 40 Cartons per Pallet

TECHNICAL DATA Elastomeric Bitumen: Softening Point (ASTM D 36): • 220o F Flash Point (ASTM D 92): • 500o F (min) Viscosity, Brookfield Model Hat Probe #1 @ 50 RPM: • 75 - 250 cP Penetration, Units @ 77o F (ASTM D 5): • 30 - 60 dmm Heat Resistance Penetration, 77o F, 100 g, 5 sec: • -5 to +12 Elongation (ASTM D 412): • 900% min.

Recovery from 300% (ASTM D 412): • 80% min.

Flexibility Low Temp (ASTM D 3111): • Pass at 0o F HG 3140 05/18

Ply Sheet: Basic Weight (ASTM D 3776): • 170 gm/m, 5.0 oz/yd2 Thickness (ASTM D 1777): • 0.032 in., 19.7 mils Tensile Strength @ 73o F (ASTM D 4830): • 35 lb/in (Machine Direction) • 30 lb/in (Transverse Direction) Elongation @ 73o F (ASTM D 4830): • 45% (Machine Direction) • 55% (Transverse Direction) Trap Tear Strength (ASTM D 4830): • 15 lbf (Machine Direction) • 20 lbf (Transverse Direction)

www.hanging-gardens.com

Page 1 of 1

VEGETATIVE ROOFING COMPONENTS WATERPROOFING Spray Applied Rubber

Product #

3150

Our Cold Spray Applied Instant-Setting Liquid Rubber System is a non-toxic, environmentally friendly, twocomponent spray-applied roof and waterproofing coating formulated with premium rubber polymers. Our Spray Applied Rubber system: is a tough, yet extremely flexible material that can be efficiently sprayed to any thickness creates a fully-adhered, monolithic waterproofing membrane with no waste is water-based with no VOC’s and is classified as a “green” product is perfect for use on green & blue roofs as well as stormwater capturing systems can be applied directly over an existing roof system, eliminating the need for wasteful and costly tear-offs is cured to the touch immediately, with a typical full cure time of 10-18 hours with sunny and warm weather conditions (50o F)

Tiered pricing based on product quantity

50 gal. Drum covers 500 ft2 at 100 mils. thick 4 Drums per Pallet

TECHNICAL DATA Resistance to Ponding: • Withstands indefinitely Hydrostatic Pressure (BS EN 12390-8): • No penetration; 5 bar pressure Water Vapor Transmission (ASTM E 96): • 0.26 perms Low Temperature Flexibility (ASTM D 5147): • Passes at -20o C Elongation & Recovery (ASTM D 412-97): • 1914% with 98% recovery Impact Resistance (ASTM D 3746): • Excellent, 0.5 Rating Peel Adhesion to Concrete & Primed BUR (ASTM D 903): • 42 lbs. / in.

HG 3140 05/18

Puncture Resistance (ASTM E 154): • Excellent Xenon Exposure 1000 hrs. (UV), (ASTM G 155): • Excellent, No Change Wind Uplift (FM 4470): • 1-990 (Highest possible rating) Hail Resistance (FM 4470): • Severe Hail Rating Fire Resistance (ASTM E 108 & FM 4470): • Class A Pull Off Strength (ASTM D 3746): • Plywood: 591 lbs. / in2 • EPDM: 734 lbs. / in2 • Cap Sheet: 729 lbs. / in2

www.hanging-gardens.com

Page 1 of 1

VEGETATIVE ROOFING COMPONENTS WATERPROOFING Polyvinyl Chloride (PVC)

Product #

3160

Our high tensile strength, root-resistant Polyvinyl Chloride (PVC) system is a heat-welded, loose laid and/or fully adhered thermoplastic waterproofing system. Our PVC system: has superior resistance to chemicals, chemical fumes, greases, acids, oils, and many kinds of fuels is ideal for green roof installations as well as belowgrade applications provides high strength against breaking and tearing, and resists excessive elongation and sheet deformation during installation holds the longest track record of successful installations among all types of thermoplastic roofing membranes is available in 50, 60, 72, 80, & 96 mil thicknesses as well as in 10’ wide rolls for faster installation, fewer seams Tiered pricing based on product quantity

370 lb. Roll covers 1,000 ft2 at 60 mils. thick 10 Rolls per Pallet

TECHNICAL DATA Thickness (ASTM D 751): • 0.060” Breaking Strength (ASTM D 751): • 256 lbf x 242 lbf Seam Strength (ASTM D 751): • 297 lbf Tear Strength (ASTM D 751): • 99 lbf x 70 lbf Elongation (ASTM D 751): • 57% x 54% Heat Aging (ASTM D 3045): • > 90% Static Puncture Resistance (ASTM D 5602): • Pass Dynamic Puncture Resistance (ASTM D 5635): • Pass HG 3160 05/18

Low Temperature Bend (ASTM D 2136): • Pass (-40o F) Accelerated Weathering (ASTM G 155): • Pass Dimensional Stability (ASTM D 1204): • 0.25% Wt. Change After Water Immersion (ASTM D 570): • 1.96% Solar Reflectivity (ASTM C 1549): • 82% Emissivity (ASTM C 1371): • 0.91 SRI (ASTM E 1980): • 109

www.hanging-gardens.com

Page 1 of 1

VEGETATIVE ROOFING COMPONENTS GEOFOAM INSULATION Ultralight Geofoam

Product #

3191

Our Ultralight Expanded Polystyrene (EPS) Geofoam Insulation is a multi-functional product engineered to provide control of structural integrity and cost effectiveness.

Specific to this product, it: is approximately 10% the weight of other lightweight fill alternatives is an efficient thermal insulator, retaining its R-Value and strength after exposure to moisture and freezethaw cycles; warranted to maintain 100% of its claimed R-value for 20 years has a closed-cell structure that limits water absorption; exposure to water or water vapor does not cause swelling is produced in blocks that can be easily cut into various shapes & sizes on site to suit specific project needs can be reground, recycled, and reused in many composite applications can be manufactured with a proven and safe additive that effectively resists termites is available with a precut taper to provide positive drainage

Tiered pricing based on product quantity

8’ x 4’ sheets are cut to the required thickness 3,072 BF per Pallet

TECHNICAL DATA Materials: • High Compressive Strength / Rot proof EPS with liquid uptake resistance Thermal Resistance (R-Value): • 3.10 per 1” thickness Moisture Resistance: • 4% maximum absorption by volume Oxygen Index: • 24% by volume Flexural Strength: • 10 lbs. / in2

HG 3191 05/18

Dimensional Stability: • 2% maximum change in dimension Compressive Resistance: • 2.2 lbs. / in2 at 1% strain • 5.1 lbs. / in2 at 5% strain • 5.8 lbs. / in2 at 10% strain Density / Weight: • 0.70 lbs. / ft3 Vegetated Roofing Use: • Ultralight blue & vegetated roofs • < 300 lbs. / ft2

www.hanging-gardens.com

Page 1 of 1

VEGETATIVE ROOFING COMPONENTS GEOFOAM INSULATION Lightweight Geofoam

Product #

3192

Our Lightweight Expanded Polystyrene (EPS) Geofoam Insulation is a multi-functional product engineered to provide control of structural integrity and cost effectiveness.

Specific to this product, it: is approximately 10% the weight of other lightweight fill alternatives is an efficient thermal insulator, retaining its R-Value and strength after exposure to moisture and freezethaw cycles; warranted to maintain 100% of its claimed R-value for 20 years has a closed-cell structure that limits water absorption; exposure to water or water vapor does not cause swelling is produced in blocks that can be easily cut into various shapes & sizes on site to suit specific project needs can be reground, recycled, and reused in many composite applications can be manufactured with a proven and safe additive that effectively resists termites is available with a precut taper to provide positive drainage

Tiered pricing based on product quantity

8’ x 4’ sheets are cut to the required thickness 3,072 BF per Pallet

TECHNICAL DATA Materials: • High Compressive Strength / Rot proof EPS with liquid uptake resistance Thermal Resistance (R-Value): • 3.60 per 1” thickness Moisture Resistance: • 4% maximum absorption by volume Oxygen Index: • 24% by volume Flexural Strength: • 25 lbs. / in2

HG 3192 05/18

Dimensional Stability: • 2% maximum change in dimension Compressive Resistance: • 3.6 lbs. / in2 at 1% strain • 8.0 lbs. / in2 at 5% strain • 10.2 lbs. / in2 at 10% strain Density / Weight: • 0.90 lbs. / ft3 Vegetated Roofing Use: • Lightweight blue & vegetated roofs • < 500 lbs. / ft2

www.hanging-gardens.com

Page 1 of 1

VEGETATIVE ROOFING COMPONENTS GEOFOAM INSULATION Extensive Geofoam

Product #

3193

Our Extensive Expanded Polystyrene (EPS) Geofoam Insulation is a multi-functional product engineered to provide control of structural integrity and cost effectiveness.

Specific to this product, it: is approximately 10% the weight of other lightweight fill alternatives is an efficient thermal insulator, retaining its R-Value and strength after exposure to moisture and freezethaw cycles; warranted to maintain 100% of its claimed R-value for 20 years has a closed-cell structure that limits water absorption; exposure to water or water vapor does not cause swelling is produced in blocks that can be easily cut into various shapes & sizes on site to suit specific project needs can be reground, recycled, and reused in many composite applications can be manufactured with a proven and safe additive that effectively resists termites is available with a precut taper to provide positive drainage

Tiered pricing based on product quantity

8’ x 4’ sheets are cut to the required thickness 3,072 BF per Pallet

TECHNICAL DATA Materials: • High Compressive Strength / Rot proof EPS with liquid uptake resistance Thermal Resistance (R-Value): • 3.80 per 1” thickness Moisture Resistance: • 3% maximum absorption by volume Oxygen Index: • 24% by volume Flexural Strength: • 30 lbs. / in2

HG 3193 05/18

Dimensional Stability: • 2% maximum change in dimension Compressive Resistance: • 5.8 lbs. / in2 at 1% strain • 13.1 lbs. / in2 at 5% strain • 16.0 lbs. / in2 at 10% strain Density / Weight: • 1.15 lbs. / ft3 Vegetated Roofing Use: • Extensive blue & vegetated roofs • < 800 lbs. / ft2

www.hanging-gardens.com

Page 1 of 1

VEGETATIVE ROOFING COMPONENTS GEOFOAM INSULATION Semi-Intensive Geofoam

Product #

3194

Our Semi-Intensive Expanded Polystyrene (EPS) Geofoam Insulation is a multi-functional product engineered to provide control of structural integrity and cost effectiveness.

Specific to this product, it: is approximately 10% the weight of other lightweight fill alternatives is an efficient thermal insulator, retaining its R-Value and strength after exposure to moisture and freezethaw cycles; warranted to maintain 100% of its claimed R-value for 20 years has a closed-cell structure that limits water absorption; exposure to water or water vapor does not cause swelling is produced in blocks that can be easily cut into various shapes & sizes on site to suit specific project needs can be reground, recycled, and reused in many composite applications can be manufactured with a proven and safe additive that effectively resists termites is available with a precut taper to provide positive drainage

Tiered pricing based on product quantity

8’ x 4’ sheets are cut to the required thickness 3,072 BF per Pallet

TECHNICAL DATA Materials: • High Compressive Strength / Rot proof EPS with liquid uptake resistance Thermal Resistance (R-Value): • 4.00 per 1” thickness Moisture Resistance: • 3% maximum absorption by volume Oxygen Index: • 24% by volume Flexural Strength: • 35 lbs. / in2

HG 3194 05/18

Dimensional Stability: • 2% maximum change in dimension Compressive Resistance: • 7.3 lbs. / in2 at 1% strain • 16.7 lbs. / in2 at 5% strain • 19.6 lbs. / in2 at 10% strain Density / Weight: • 1.35 lbs. / ft3 Vegetated Roofing Use: • Semi-Intensive blue & vegetated roofs • < 1000 lbs. / ft2

www.hanging-gardens.com

Page 1 of 1

VEGETATIVE ROOFING COMPONENTS GEOFOAM INSULATION Intensive Geofoam

Product #

3195

Our Intensive Expanded Polystyrene (EPS) Geofoam Insulation is a multi-functional product engineered to provide control of structural integrity and cost effectiveness.

Specific to this product, it: is approximately 10% the weight of other lightweight fill alternatives is an efficient thermal insulator, retaining its R-Value and strength after exposure to moisture and freezethaw cycles; warranted to maintain 100% of its claimed R-value for 20 years has a closed-cell structure that limits water absorption; exposure to water or water vapor does not cause swelling is produced in blocks that can be easily cut into various shapes & sizes on site to suit specific project needs can be reground, recycled, and reused in many composite applications can be manufactured with a proven and safe additive that effectively resists termites is available with a precut taper to provide positive drainage

Tiered pricing based on product quantity

8’ x 4’ sheets are cut to the required thickness 3,072 BF per Pallet

TECHNICAL DATA Materials: • High Compressive Strength / Rot proof EPS with liquid uptake resistance Thermal Resistance (R-Value): • 4.20 per 1” thickness Moisture Resistance: • 2% maximum absorption by volume Oxygen Index: • 24% by volume Flexural Strength: • 50 lbs. / in2

HG 3195 05/18

Dimensional Stability: • 2% maximum change in dimension Compressive Resistance: • 10.9 lbs. / in2 at 1% strain • 24.7 lbs. / in2 at 5% strain • 29.0 lbs. / in2 at 10% strain Density / Weight: • 1.80 lbs. / ft3 Vegetated Roofing Use: • Intensive blue & vegetated roofs • < 1500 lbs. / ft2

www.hanging-gardens.com

Page 1 of 1

VEGETATIVE ROOFING COMPONENTS GEOFOAM INSULATION Plaza Geofoam

Product #

3196

Our Plaza Expanded Polystyrene (EPS) Geofoam Insulation is a multi-functional product engineered to provide control of structural integrity and cost effectiveness. Specific to this product, it: is approximately 10% the weight of other lightweight fill alternatives is an efficient thermal insulator, retaining its R-Value and strength after exposure to moisture and freezethaw cycles; warranted to maintain 100% of its claimed R-value for 20 years has a closed-cell structure that limits water absorption; exposure to water or water vapor does not cause swelling is produced in blocks that can be easily cut into various shapes & sizes on site to suit specific project needs can be reground, recycled, and reused in many composite applications can be manufactured with a proven and safe additive that effectively resists termites is available with a precut taper to provide positive drainage

Tiered pricing based on product quantity

8’ x 4’ sheets are cut to the required thickness 3,072 BF per Pallet

TECHNICAL DATA Materials: • High Compressive Strength / Rot proof EPS with liquid uptake resistance Thermal Resistance (R-Value): • 4.20 per 1” thickness Moisture Resistance: • 2% maximum absorption by volume Oxygen Index: • 24% by volume Flexural Strength: • 60 lbs. / in2

HG 3196 05/18

Dimensional Stability: • 2% maximum change in dimension Compressive Resistance: • 15.0 lbs. / in2 at 1% strain • 35.0 lbs. / in2 at 5% strain • 40.0 lbs. / in2 at 10% strain Density / Weight: • 2.40 lbs. / ft3 Vegetated Roofing Use: • Intensive / Plaza blue & vegetated roofs • < 2000 lbs. / ft2

www.hanging-gardens.com

Page 1 of 1

VEGETATIVE ROOFING COMPONENTS GEOFOAM INSULATION Vehicular Geofoam

Product #

3197

Our Vehicular Expanded Polystyrene (EPS) Geofoam Insulation is a multi-functional product engineered to provide control of structural integrity and cost effectiveness.

Specific to this product, it: is approximately 10% the weight of other lightweight fill alternatives is an efficient thermal insulator, retaining its R-Value and strength after exposure to moisture and freezethaw cycles; warranted to maintain 100% of its claimed R-value for 20 years has a closed-cell structure that limits water absorption; exposure to water or water vapor does not cause swelling is produced in blocks that can be easily cut into various shapes & sizes on site to suit specific project needs can be reground, recycled, and reused in many composite applications can be manufactured with a proven and safe additive that effectively resists termites is available with a precut taper to provide positive drainage

Tiered pricing based on product quantity

8’ x 4’ sheets are cut to the required thickness 3,072 BF per Pallet

TECHNICAL DATA Materials: • High Compressive Strength / Rot proof EPS with liquid uptake resistance Thermal Resistance (R-Value): • 4.30 per 1” thickness Moisture Resistance: • 2% maximum absorption by volume Oxygen Index: • 24% by volume Flexural Strength: • 75 lbs. / in2

HG 3197 05/18

Dimensional Stability: • 2% maximum change in dimension Compressive Resistance: • 18.6 lbs. / in2 at 1% strain • 43.5 lbs. / in2 at 5% strain • 50.0 lbs. / in2 at 10% strain Density / Weight: • 2.85 lbs. / ft3 Vegetated Roofing Use: • Vehicular blue & vegetated roofs • < 2500 lbs. / ft2

www.hanging-gardens.com

Page 1 of 1