Australia Product Catalogue
www.hellamarine.com
Hella marine, Auckland, New Zealand.
Welcome to the Hella marine catalogue, your complete guide to our advanced lighting products engineered for energy efficiency, safety and reliability.
Design and Development
Automated Robotics
Hella marine is a worldwide marine lighting specialist represented in over 30 countries. The range was first created in 1925 by Hella KG in Germany then relocated to Austria in 1993. Since 2004 Hella marine has been headquartered in Auckland, New Zealand - a country with a rich maritime history of boat building and yacht racing success. Founded in 1973, today Hella New Zealand is a leading optoelectronics designer and manufacturer within the Hella group, specialising in the development, production, marketing and distribution of advanced lighting products utilizing the latest LED (Light Emitting Diode) technology. This LED expertise is channelled into navigation lamps, deck floodlights, interior and exterior lamps and boat trailer lighting. With these ranges, Hella marine is a supplier to leading yacht and powerboat manufacturers, marine re-sellers and commercial fleets around the world.
Goniometer Photometric Testing
Manufacturing
2
Š 2010 Hella-New Zealand Limited. The illustrations, information and specifications contained within this catalogue remain the property of Hella-New Zealand Limited. Any unauthorised copying or distribution of this material outside the catalogue, is prohibited without prior approval.
Contents Product Index by Series
5
Navigation Lamp Requirements & Technology Lamp Definitions and Applications International Standards IP Degrees of Protection Definition
7 8 12 14
LED Navigation Lamps NaviLED ®Trio LED Tri Colour NaviLED ®PRO NaviLED ®360 NaviLED ®Compact NaviLED ®Deck Mount
15 17 18 20 22 24
Bulb Navigation Lamps 2492 Series 2010 Series 3562 Series Position Lamps 2984 Series Position Lamps 2984 Series Tri Colour Lamps 2984 Series All Round Lamps
LED Deck Floodlights LED Mega Beam LED Module 70 LED Sea Hawk
25 26 27-28 29 30 31 32
33 36 37 38
HID (Xenon) and Halogen Deck Floodlights 41 Xenon Floodlights 43 Halogen Floodlights 44-49 Masthead / Deck Floodlights 50-52 Search Lights 53 Hand Held Spot Lights 54
LED Interior / Exterior Lighting Waiheke Rakino and Tiri SpotLED Ponui Reading Lamps DuraLed ® 20, 36 and 50 LED DuraLed ® 12 LED Recessed EuroLED ® Recessed EuroLED ® Touch EuroLED ® Touch EuroLED ® CargoLED ® Easy Fit Courtesy Lamps Slim Line Round Courtesy Lamps Slim Line Square Courtesy Lamps
55 64 66 68 70 72 74 75 76 78 80 81 82 84 86
Oblong Step Lamps Oblong Courtesy Lamps Thin Light Surface Mount Strip Lamps Recess Mount Strip Lamps Surface Mount Courtesy Lamps Livewell Lamp Flexible Spot Lamps Spare Parts - Rims
88 89 90 91 92 92 93 94
Incandescent Interior Lighting Fluorescent Tube Lamps Chart Reading Lamps General Lighting Reading Lamps General Lighting
95 96 97 98-100 101 102
Underwater Lighting LED Round Surface Mount LED Round Thru Hull LED Oblong Surface Mount Xenon Thru Hull Halogen Thru Hull
103 106-107 106-107 108 109 110
Trailer Products LED Combination Lamps LED Position Lamps Plugs and Sockets Brackets
111 112-113 114 115 116
Accessories Fans Light Dimmer Voltage Sensitive Relay Battery Switches Switch Panels Blade Fuse Boxes LED Pilot Lamps Marine Grade Switches Rocker Switches Magcode Power Systems Plugs and Sockets Super Seal Connectors Tools Relays Crimp Terminals Cable Ties Circuit Breakers and Fuses Bilge Pumps
117 118 119 119 120-122 123 124-125 125 126 127 128 129 130 131 132-135 136-137 138 139 140
Replacement Bulbs
141
Index by Part Number
145
X-46 www.x-yachts.com
The Hella marine vision is to provide world leading marine lighting products that set benchmarks for quality, reliability, safety and energy efficiency and to meet customer expectations for outstanding service and support. At sea, power is often a scarce resource. Highly efficient LED lighting has a substantial role to play in conserving energy and enhancing a vessel without sacrificing functionality or compromising safety. Hella marine ‘fit and forget’ LED lighting is firmly established as the solution of choice that meets long term reliability and economic considerations for astute owners and operators.
Riviera 43FB www.riviera.com.au
4
Product series by page number Hella marine part numbers list the product series within the sixth to ninth digits. Eg - LED Tri Colour part number 2LT 980 650-001 is series 0650.
Series
Series Description
0500
LED Courtesy Lamps
0501
LED Courtesy Lamps
0502 0503
Page
Series
Series Description
Page
85
4813
Chart Reading Lamps
85
5759
Reading Lamps
LED Courtesy Lamps
85
6044
Halogen Interior Lamps
99
LED Courtesy Lamps
85
6046
Halogen Interior Lamps
99
0507
LED Courtesy Lamps
85
6047
Halogen Interior Lamps
99
0508
LED Courtesy Lamps
85
6082
Halogen Floodlights
45
0520
LED Navigation Lamps
23
6134
Halogen Floodlights
49
0580
LED Courtesy Lamps
87
6136
LED Floodlights
36 43
97 101
0581
LED Courtesy Lamps
87
6142
HID Floodlights
0582
LED Courtesy Lamps
87
6176
LED Floodlights
37
0583
LED Courtesy Lamps
87
6361
Halogen Floodlights
48
0587
LED Courtesy Lamps
87
6886
Reading Lamps
0588
LED Courtesy Lamps
87
7118
Halogen Floodlights
44
0604
LED Interior / Exterior Lamps
73
7372
Fluorescent Lamps
96
101
0608
LED Interior / Exterior Lamps
73
7373
Fluorescent Lamps
96
0620
LED Navigation Lamps
24
8502
Halogen Search Light
53
0630
LED Interior / Exterior Lamps
77
8503
Halogen Floodlights
52
0631
LED Interior / Exterior Lamps
75
8504
Halogen Floodlight/Masthead Lamps
51
0650
LED Tri Colour / Anchor Lamp
17
8505
Halogen Floodlight/Masthead Lamps
50
0670
LED Floodlights
39
8506
Halogen Floodlights
52
0681
LED Interior / Exterior Lamps
65
8508
Halogen Downlights
98
0750
LED Underwater Lights
106
8513
Incandescent Dome Lamps
0751
LED Underwater Lights
106
8516
Halogen Interior Lamps
0752
LED Underwater Lights
107
8517
Halogen Floodlights
0753
LED Underwater Lights
107
8518
Halogen Floodlights
0754
LED Underwater Lights
108
8527
Halogen Interior Lamps
0755
HID Underwater Lights
109
8534
HID Floodlights
43
0756
Halogen Underwater Lights
110
8541
Halogen Floodlights
46
0757
HID Underwater Lights
109
8542
Halogen Floodlights
46
0770
LED Reading Lamps
71
8543
LED Baitwell Lamps
92
0771
LED Reading Lamps
71
8560
LED Courtesy Lamps
83
0910
LED All Round Lamps
21
9073
LED Strip Lamps
91
98 100 47 45 100
0956
LED Interior / Exterior Lamps
65
9076
LED Interior / Exterior Lamps
65
0957
LED Interior / Exterior Lamps
65
9510
LED Courtesy Lamps
89
1330
General Interior Lamps
102
9596
LED Downlights
67
2010
Incandescent Navigation Lamps
27
9599
LED Downlights
67
2010
Incandescent All Round Lamps
28
9630
LED Courtesy Lamps
92
2492
Incandescent All Round Lamps
26
9680
LED Step Lamps
88
2984
Incandescent Navigation Lamps
30
9700
LED Interior / Exterior Lamps
74
2984
Incandescent Tri Colour Lamps
31
9704
LED Interior / Exterior Lamps
74
2984
Incandescent All Round Lamps
32
9820
LED Interior / Exterior Lamps
80
3227
LED Interior / Exterior Lamps
81
9900
LED Port Lamps
19
3562
Incandescent Navigation Lamps
29
9908
LED Starboard Lamps
19
3606
LED Strip Lamps
90
9909
LED Stern Lamps
19
3681
Reading Lamps
101
9940
LED Masthead Lamps
19
3720
LED Chart Table Lamps
93
9950
LED Interior / Exterior Lamps
79
3980
LED Downlights
69
9951
LED Interior / Exterior Lamps
79
4192
General Interior Lamps
4532
Incandescent Chart Table Lamps
102 97
Auckland Pilot Boat. Image provided by New Zealand Professional Skipper Magazine. www.skipper.co.nz
ISO Certification Hella New Zealand Limited is certified to the international
ISO 9001
quality standard ISO 9001:2008 for:
BUREAU VERITAS Certification
‘The Design and Manufacture of Marine Navigation Lighting,
Nº 201297
Control Units.
General Lighting, LED Based Lighting and Associated Electronic The Design and Manufacture of Automotive Lighting and Signalling Equipment, General Lighting, Optical Products and Plastic Components.’
Warranty - Standing behind our product STATEMENT OF WARRANTY Hella marine branded products are covered by a warranty against manufacturing or material defects.
All LED based lighting products manufactured by Hella marine carry a 5 Year Warranty covering faults in material, components or workmanship. For all other products, the following warranties apply Hella marine NaviLED ®TRIO Tri Colour LED navigation lamps carry a 7 Year Warranty. Hella marine Underwater Lights in HID (Xenon), LED or Halogen based technology carry a 2 Year Warranty. Hella marine HID (Xenon) and Halogen based Deck Floodlights carry a 1 Year Warranty. Hella marine bulb based interior and exterior lamps, and products listed in the Accessories section of this catalogue carry a 1 Year Warranty.
6
Navigation Lamp Requirements and Technology
Navigation Lighting Lamp definitions and applications
IMO COLREG definitions for navigation lighting
“All Round Lamp” A light showing an unbroken arc over the horizon of 360 degrees. All Round Lamps may output white light, red light or green light.
“Side Lights” A green light on the starboard side (Starboard lamp) and a red light on the port side (Port lamp) each showing an unbroken light over an arc of the horizon of 112.5 degrees and fixed to show the light from right ahead to 22.5 degrees (2 points) abaft the beam. On a vessel less than 20 meters in length sidelights may be combined into one lamp (a ‘Bi-Colour’ Lamp) carried on the fore and aft centre line of the vessel.
“Stern Lamp” A white light placed as close as practicable to the stern showing an unbroken light over an arc of the horizon of 135 degrees and so fixed to show the light from right aft for 67.5 degrees (6 points) on both sides of the vessel. “Towing Lamp” A yellow light placed in a vertical position above the stern lamp showing an unbroken light over an arc of the horizon of 135 degrees and so fixed to show the light from right aft for 67.5 degrees (6 points) on both sides of the vessel.
“Masthead Lamp” A white light placed over the fore and aft centre line of the vessel showing an unbroken light over an arc of the horizon of 225 degrees and fixed to show the light from right ahead to 22.5 degrees (2 points) abaft the beam on both sides of the vessel.
“Tri Colour Lamp” On a sailing vessel less than 20 meters in length under sail, the sidelights and stern light may be combined into one lamp positioned on top of the mast. When the sailing vessel is under power, the Tri Colour lamp must be switched off and the navigation lamp rules for power driven vessels apply.
8
Lamp definitions and applications
Lamps requirements by vessel length
For vessels less than 50 meters in length overall, IMO COLREG 72 describes the following minimum visible distances for navigation lamps. Supplementary national approvals may also apply. Distances are in Nautical Miles.
Vessels 0-12 meters / 0-40 feet in length:
White, Red, Green All Round lamps, 2 miles Masthead lamp, 2 miles Port and Starboard lamps, 1 mile Stern lamp, 2 miles Tri Colour lamp, 2 miles. (Sailing vessels under sail only)
Vessels 12-20 meters / 40-65 feet in length:
White, Red, Green All Round lamps, 2 miles Masthead lamp, 3 miles Port and Starboard lamps, 2 miles Stern lamp, 2 miles Tri Colour lamp, 2 miles. (Sailing vessels under sail only)
Vessels 20-50 meters / 65-150 feet in length:
White, Red, Green All Round lamps, 2 miles Masthead lamp, 5 miles Port and Starboard lamps, 2 miles Stern lamp, 2 miles
Passenger Catamaran www.Q-west.com. Image provided by New Zealand Professional Skipper Magazine. www.skipper.co.nz
9
Navigation Lighting IMO COLREG 72 Lights and Visibility - Powerboats IMO COLREG requirements for navigation lighting on powerboats less than 50m LOA (Length Overall). Note - Sailboats under motor adopt the rules for Powerboats. Powerboats up to 12m where Masthead
Powerboats up to 12m where Masthead
Powerboats up to 7m. Max 7 knots
and Stern lamps cannot be mounted
and Stern lamps cannot be mounted
1 All Round White lamp
1 All Round White lamp
1 All Round White lamp
1 Port lamp
1 Bi-Colour lamp
1 Starboard lamp
Powerboats up to 20m
Powerboats up to 20m
Powerboats up to 50m
1 Masthead lamp
1 Masthead lamp
1 Masthead lamp
1 Port lamp
1 Bi-Colour lamp
1 Port lamp
1 Starboard lamp
1 Stern lamp
1 Starboard lamp
1 Stern lamp
1 Stern lamp
A vessel less than 50m engaged in
A vessel less than 50m engaged in
trawling
fishing, other than trawling
1 All Round Green lamp
1 All Round Red lamp
1 All Round White lamp
1 All Round White lamp
mounted above one another
mounted above one another
less than 200m
A vessel engaged in diving operations
A vessel engaged in pilotage duty
In addition to Port, Starboard and Stern lamps
1 All Round Red lamp
In addition to Port, Starboard, Masthead and
1 Towing lamp mounted above the stern lamp
1 All Round White lamp
Stern lamps
2 Masthead lamps in a vertical line
1 All Round Red lamp
1 All Round White lamp
(When the tow length exceeds 200m, three
mounted above one another
1 All Round Red lamp
Powerboats towing with a tow length of
Masthead lamps in a vertical line)
10
mounted above one another
IMO COLREG 72 Lights and Visibility - Sailboats IMO COLREG requirements for navigation lighting on sailboats less than 50m LOA (Length Overall). Note - Sailboats under motor adopt the rules for Powerboats.
Sailboats up to 20m under sail
Sailboats up to 20m under sail
Sailboats more than 20m under sail
1 Port lamp
1 Bi-Colour lamp
1 All Round Red lamp above
1 Starboard lamp
1 Stern lamp
1 All Round Green lamp 1 Port lamp
1 Stern lamp
1 Starboard lamp or 1 Bi-Colour lamp 1 Stern lamp
Sailboats up to 20m under sail
1 Tri-Colour lamp
Sailboats and Powerboats less than 50m at anchor
1 All Round White lamp
Sailboats and Powerboats more than
Sailboats and Powerboats more than
Sailboats and Powerboats more than
12m grounded
12m not under command
12m manoeuvring with difficulty
1 All Round White lamp
In addition to Port, Starboard and Stern lamps
In addition to Port, Starboard and Stern lamps
2 All Round Red lamps
2 All Round Red lamps
1 All Round Red lamp
mounted above one another
mounted above one another
1 All Round White lamp 1 All Round Red lamp mounted above one another
11
Navigation Lighting International Standards
Hella marine navigation lamps comply with the International Regulations for Prevention of Collisions at Sea (IMO COLREG 72). This IMO compliance, together with supplementary national requirements, is listed with each navigation lamp series throughout the catalogue.
Main approval types: Complies with IMO (International Maritime Organization) requirements under the International Regulations for the Prevention of Collisions at Sea. (IMO COLREG 72) IMO COLREG 72 forms the international basis for legal navigation lighting on vessels.
Approved by the German BSH (Bundesamt f端r Seeschifffahrt und Hydrographie) and carry BSH type approval numbers. BSH was formerly called DHI (Deutsches Hydrographisches Institut).
Approved by the Italian RINA (Registro Italiano Navale) authority. Approved lamps carry a RINA type approval number.
Complies with USCG (United States Coast Guard) requirements. Lamps carry a marking for minimum visible distance in nautical miles, Eg USCG 2 NM.
Complies with ABYC (American Boat and Yacht Council) Navigation Lamp Standard A-16.
Approved under the Marine Equipment Directive (MED) 96/98/EC last modified by directive 208/67/EC for use throughout Europe in all EC member states for both pleasure and commercial vessels.
12
International Standards
BSH NaviLED®PRO Self Diagnostic Control Hella marine NaviLED ®PRO BSH LED navigation lamps are type approved and certified according to the European norm EN 14744 by the German Federal Maritime and Hydrographic Agency (BSH) for German inland waterways and the open sea. To ensure long term safety at sea, each NaviLED®PRO BSH navigation lamp is equipped with a sophisticated self diagnostic control. A photometrical self-test is carried out by the lamp in periodic intervals. If the light output, and consequently the visibility, reaches a pre-determined value, the lamp activates ‘Service Mode’. Service Mode is indicated by the lamp flashing at a rate of 60 flashes per minute for 15 seconds as soon as the lamp is switched on. This will occur for 15 seconds every time the lamp is switched on until the unit has operated for 2000 hours. After 2000 hours the Service Mode flash rate doubles to 120 flashes per minute for 15 seconds as soon as the lamp is switched on. To ensure the lamp meets the light output criteria of its certification, Hella marine recommends the light module be replaced as soon as it enters this 2000 hour Service Mode stage. The 2000 Service Mode flash rate should not occur earlier than tens of thousands of hours. By regular recreational boating standards, even with regular night sailing, this stage will hardly ever be reached.
Wheelmark Approval
The ‘Wheelmark’ for navigation lights symbolises conformity with the requirements of the norms EN 14744 (European standard for navigation lights on inland and sea-going vessels) and with EN 60945 stipulating methods of testing and standards required for maritime navigation equipment.
’Wheelmark’ certified Hella marine LED navigation lamps are approved throughout Europe in all EC member states for both pleasure and commercial vessels. Wheelmark approvals replace the previously required certificates of the national authorities with the aim of ensuring that the equipment meets a common standard of safety and performance valid in each member state of the EU. A predominant safety requirement of EN 14744 for LED navigation lights is the monitoring and control of light output deviations caused by service life conditions. The Hella marine solution is a sophisticated self control and diagnostic electronics integrated into each BSH certified NaviLED®PRO LED navigation lamp. The electronics check and measure each lamp ensuring light intensity, and consequently the lamp’s visibility performance, permanently correspond to the visibility requirements of the norm for ongoing safety and reliability at sea. The MED certification of each Hella marine NaviLED®PRO series lamp can be recognized by the symbol of a ship’s wheel (“Wheelmark”) engraved onto the top section of the shroud, and also onto the top section of the lens. *The MED lists statutory equipment carried and used on ships which are registered under the flags of the European Union member states which have to meet the international conventions developed by the International Maritime Organisation (IMO).
13
New Zealand Coastguard Rayglass Protector 850 www.rayglass.co.nz
IP Degrees of Protection Definition IP stands for International Protection, the IP degrees of protection are determined by DIN 40050 part 9. This standard exists to specify the exact protection of electrical equipment against penetration by solid foreign matter, including dust and water. The exact degree of protection is achieved by various tests. e.g.;
IP 6K 9K
The IP rating of the 8517 series deck floodlight is listed as IP 6K 9K. This means dust tight and protected from high pressure cleaning.
First numeral – Protection against the ingress of solid foreign objects (table 1) Second numeral – Protection against the ingress of water (table 2)
14
Table 1: Protection against the ingress of solid foreign objects (including dust)
Table 2: Protection against the ingress of water
X..................... 0..................... 1..................... 2..................... 3..................... 4..................... 5 and 5K......... 6 and 6K.........
X..................... 0..................... 1..................... 2..................... 3..................... 4..................... 4K................... 5..................... 6..................... 6K................... 7..................... 8..................... 9K...................
not tested not protected solid foreign objects solid foreign objects solid foreign objects solid foreign objects dust protected dust tight
∅ ∅ ∅ ∅
≥ ≥ ≥ ≥
50 mm 12.5 mm 2.5 mm 1.0 mm
not tested not protected vertical dripping dripping (inclined 15°) spraying splashing same with increased pressure jetting powerful jetting same at increased pressure temporary immersion continuous immersion high pressure/steam jet cleaning
LED Navigation Lamps
Introduction LED Navigation Lamps
LED Navigation Lamp Technology Hella marine LED based navigation lamps provide power saving, highly visible and ultra durable lighting for reliability and safety at sea. Benefits of LED lighting technology: Ultra Low Power Consumption Combining efficient LED light sources with advanced optic technology, Hella marine LED products deliver more light output per watt than traditional bulb lamps and thus provide considerable power saving. Hella marine NaviLED®PRO navigation lamps use less than 10% of the power required to run a 25W incandescent bulb navigation lamp certified to the same visible distance.
No bulbs, No maintenance. Ultra long service life Hella marine LED technology has no filaments to break, thus making the LED lamps extremely shock and vibration resistant for reliable illumination and safety. Our engineering team has developed a unique range of highly demanding tests to lift product reliability to new standards.
Safe and highly visible Advanced LED navigation lamp optics deliver optimal horizontal and vertical light distribution according to international standards. They provide enhanced visibility compared to bulb navigation lamps. Cut-off angles are ultra precise, clearly indicating a vessel’s movement and heading.
Fully sealed for life Each Hella marine LED lamp is a completely sealed opto-electronic device. Proven design, precision engineering, and the use of high impact acrylic materials ensures superior resistance to water, impact, UV and general wear and tear.
Superior Lens and Optic Materials All Hella marine LED Navigation lamps feature extra thick lenses - providing a long term lighting solution and environmentally friendly choice. In 2007 Hella marine took the development of ultra durable LED Navigation lighting to a new level by specifying Grilamid®, a high performance polyamide manufactured in Switzerland, for the lens of the BSH certified NaviLED®PRO series. Also used for the lens of the NaviLED®Trio Tri Colour lamp, Grilamid® is a revolutionary new transparent plastic with an exceptionally high impact strength and resistance to UV and chemical damage.
Pre-wired with marine cable Hella marine LED lamps are pre-wired with quality marine specification tinned cable. The cable is completely sealed to the lamp body providing time saving at installation and reliable electrical connection.
MultivoltTM technology for durability and safety Advanced MultivoltTM circuitry provides a uniform level of intensity for reliable and safe illumination across a range of DC inputs such as 8-28 volts or 9-33 volts. MultivoltTM LED lamps can be connected to 12 or 24 volt systems without modification, providing full light performance and automatic compensation for low battery voltages and voltage drop over long cables and connections. Hella marine MultivoltTM LED lamps are also reverse polarity and spike protected for enhanced durability even under severe voltage fluctuations. Electromagnetic Compatibility (EMC) All Hella marine LED products are electronic devices. Their electrical circuits contain components that suppress possible interference, both emission as well as susceptibility to emissions, to the limits prescribed in international standards. 16
0650 Series Tri Colour Lamp
LED Tri Colour with Anchor navigation lamp. Advanced materials and state of the art technology for reliability, efficiency and safety at sea
Ultra low current draw. Power saving on board. Port, Starboard and Stern draws less than 3.5W (<0.29A@12V DC). The Anchor lamp draws less than 1.5W (<0.13A@12V DC) for substantial power saving compared to the 25W consumed by incandescent Tri Colour lamps. Fully sealed for life. IP 67 Certified. Completely sealed, impervious to saltwater and contaminants.
Voltage
Light Colour Part Number
8-28V Red 2XT 959 630-351 10-33V White 2XT 959 630-451
RINA
IMO
RINA NMSC
A-16
IMO NZ
NMSC
COL REG 72
AUSTRALIA
COL REG 72
Safe and highly visible. Hella marine lens and optics technology ensures ultra precise horizontal and vertical cut-off angles, clearly indicating a vessel’s movement and heading.
COL REG 7
ABYC
AUSTRALIA
MARITIME
NZ
Ultra durable materials. Ultra long service life. Advanced heavy duty Grilamid ® lens and housing, plus proven Hella marine LED technology combines to provide outstanding resistance to vibration, impact and shock loads. Relentless test programs have helped lift product reliability to new standards for ongoing performance and safety in the most demanding conditions. Unique installation and removal system. The NaviLED ®Trio installs on a unique 316 stainless steel mounting shaft for a secure attachment and reliable electrical connections.
UV resistant, high impact nylon
Lens Material
UV resistant, ultra heavy duty Grilamid® lens
Windex Adaptor Nut Machined 316 stainless steel adaptor nut to install a Windex directly onto the LED Tri Colour mounting shaft.
Mounting Shaft
316 stainless steel
Minimum Visible Distance
2 Nautical Miles (Yacht)
Cable
Pre-wired with 400mm of triple core marine cable.
M12 (Mounting Shaft) to 5/16UNC. Female to female.
Operating Voltage
MultivoltTM 8-28V DC
Voltage Protection
Spike protected to +500 volts
9NM 958 988-402
USCG
IMO
COL REG 72
Housing Material
Part Number
IMO
BSH
MARITIME
LED Windex Lamps Power saving and durable lamps to illuminate reflectors of wind direction indicators.
BSH
Reverse polarity protected to -700 volts Power Consumption
Port, Starboard and Stern - Less than 3.5W combined All Round White / Anchor - Less than 1.5W
Degree of Protection
IP 67 - Completely Sealed
Weight
400g (including cable)
Approvals
BSH, IMO COLREG, USCG, ABYC NMSC, Maritime NZ D.09.1380 BSH/46162/0141380/09 a
Dimensions a = 85mm / 3.35” b = 95mm / 3.74”
a
LED Tri Colour with Anchor Lamp Packaging for aftermarket presentation
Visibility
Part Number
2 NM
2LT 980 650-001
b
Top Profile
Side Profile
17
M
9900, 9908, 9909 and 9940 Series Position Lamps Ultra durable, power saving LED navigation lamps for enhanced safety. NaviLED®PRO lamps are proven worldwide on commercial, military and recreational vessels
Ultra low current draw NaviLED ®PRO lamps use less than 10% of the power required to run a bulb navigation lamp. Port, Starboard and Stern lamps consume less than 3.2 watts combined.
Pre-wired with 2.5m of twin core marine cable High quality cable assemblies for time saving, completely sealed installations.
No bulbs, No maintenance Ultra long service life Hella marine LED technology has no filaments to break making NaviLED ®PRO lamps extremely shock and vibration proof for proven reliability and safety in demanding conditions.
ABYC A-16, RINA, BSH, Wheelmark, NMSC,
MultivoltTM 9-33V DC Advanced electronics ensure reliable illumination and lamp protection even under severe voltage fluctuations and low battery voltages. Safe and highly visible Hella marine optics deliver 100% correct light output and enhance visibility compared to bulb navigation lamps. BSH versions incorporate self diagnostic technology for long term reliability and safety.
Packaging for aftermarket presentation
Internationally certified Meets the requirements of COLREG, USCG,
Maritime NZ.
Sealed light engine clips into mounting shroud for an ultra secure attachment.
Fully sealed for life. IP 67 certified Each NaviLED ®PRO lamp is a completely sealed unit. High impact housings ensure durability from waves and impact. Ultra heavy duty BSH versions use high-tech Grilamid ® lens to offer superior strength in extreme conditions.
Rear of lamp without shroud.
NaviLED®PRO Photometric Testing NaviLED®PRO series lamps have ultra precise horizontal and vertical cut-off angles to clearly indicate a vessel’s movement and heading. Every individual NaviLED®PRO lamp is photometrically verified in production by a sophisticated goniometer to ensure compliance with the intensity and cut-off requirements of international navigation lamp standards. After passing photometric testing, a unique serial number is laser engraved onto the lens. This serial number is referenced to individual test reports which are electronically archived by Hella marine, ensuring international navigation lamp standards are consistently met. 18
Material Description
Hi impact resistant acrylic lens or c a Ultra heavy duty Grilamid® lens (BSH versions only)
Minimum Visible Distance
2 Nautical Miles (Yachts and Powerboats)
BSH
3 Nautical Miles (Powerboats only) Cable
Pre-wired with 2.5m of twin core marine cable
Operating Voltage
MultivoltTM 9-33V DC
Voltage Protection
Spike protected to +500 volts
dc
IMO COL REG 72
Weight Approvals
IMO COLREG, USCG, RINA (I), ABYC A-16
3.43”c 3.54” 2.25” 1.97”
AUSTRALIA
RINA
IMO NZ
NMSC
AUSTRALIA
AUSTRALIA MARITIME
NMSC NZ MARITIME
DimensionsNZ d a = 87mm / 3.43” b = 90mm / 3.54” c = 57mm / 2.25” d = 50 mm / 1.97”
D.06.419 BSH/4615/6010419/06
Dimensions
COLREG, USCG, RINA(I), ABYC A-16 Certified LED Navigation Lamps. High impact acrylic a = 87mm / 3.43” lens b = 90mm / 3.54” c = 57mm / 2.25” d = 50 mm / 1.97”
Port
Starboard
Stern
Masthead
2 Nautical Mile Powerboat and Yacht Lamps
3 Nautical Mile Powerboat Lamps
Lamp Type
Visibility
Black Shroud
White Shroud
Lamp Type
Visibility Black Shroud
Port
2 NM
2LT 959 900-001
2LT 959 900-011
Port
3 NM
2LT 959 900-201
2LT 959 900-211
Starboard
2 NM
2LT 959 908-001
2LT 959 908-011
Starboard
3 NM
2LT 959 908-201
2LT 959 908-211
Stern
2 NM
2LT 959 909-001
2LT 959 909-011
Stern
3 NM
2LT 959 909-201
2LT 959 909-211
Masthead** 3 NM
2LT 959 940-201
2LT 959 940-211
White Shroud
** for Powerboats and Sailing Yachts under motor
COLREG, BSH Certified LED Navigation Lamps. Ultra heavy duty Grilamid ® lens
Port
Starboard
Stern
Masthead
NaviLED PRO BSH lamps are type approved and certified according to the European norm EN 14744 by the German Federal Maritime and Hydrographic Agency (BSH) for German inland waterways and the open sea. Each NaviLED®PRO BSH lamp is equipped with a sophisticated self diagnostic control and optional high-tech Grilamid ® lens for superior strength in extreme IMO USCG COL REG 72 conditions. The Port and Starboard on Grilamid ® lens versions are clear when the lamps are OFF, rather than red or green. ®
BSH
ABYC
RINAImpact High Lens for Powerboats and Yachts A-16
Ultra Heavy Duty Lens for Powerboats and Yachts
Lamp Type
Visibility Black Shroud
Lamp Type
Visibility Black Shroud
Port
2 NM
2LT 959 900-501 2LT 959 900-511
Port
2 NM
Starboard
2 NM
2LT 959 908-501 2LT 959 908-511
Starboard
2 NM
2LT 959 908-601 2LT 959 908-611
Stern
2 NM
2LT 959 909-501 2LT 959 909-511
Stern
2 NM
2LT 959 909-601 2LT 959 909-611
Masthead** 3 NM
2LT 959 940-501 2LT 959 940-511
Masthead** 3 NM
2LT 959 940-601 2LT 959 940-611
** for Powerboats and Sailing Yachts under motor
White Shroud
COL REG
ABYC
A-16
COL REG 72
NMSC, Maritime NZ BSH
USCG
RINA NMSC
IMO
a
IMO
a
COL REG 72
Port, Starboard and Stern - Less than 3.2WDimensions combined. a = 87mm / Masthead - Less than 2.5W b = 90mm / IP 67 - Completely Sealed c = 57mm / d = 50 mm / 150g (including cable)
Degree of Protection
COL REG 72
MARITIME
Reverse polarity protected to -700 volts Power Consumption
IMO
b
BSH
White Shroud
2LT 959 900-601 2LT 959 900-611
** for Powerboats and Sailing Yachts under motor
19
b
0910 and 9910 Series All Round Lamps Hella marine NaviLED®360 lamps feature single LED efficiency, advanced MultivoltTM electronics and precision optics for reliable and highly visible all round lighting
With less than 1.5W of consumption, NaviLED ®360 lamps draw a fraction of the energy required to run a conventional 2 nautical mile incandescent lamp. No bulbs, No maintenance. Ultra long service life Hella marine LED technology has no filaments to break making NaviLED ® lamps extremely shock and vibration proof for reliability and safety in demanding conditions.
NaviLED ®360 anchor lamps have undergone extensive ‘tested to destruction’ programs to help lift product reliability to a new standard. Pre-wired with marine cable Quality twin core marine cable assemblies are used on all lamps ensuring time saving, completely sealed installations. Internationally certified Meets the requirements of COLREG, USCG, ABYC A-16, RINA, NMSC, Maritime NZ.
MultivoltTM 9-33V DC Advanced electronics ensure reliable illumination and lamp protection even under severe voltage fluctuations and low battery voltages. Sealed within the base or aluminium pole, the compact MultivoltTM drive circuitry provides reverse polarity, spike and over-voltage protection for long life and reliable operation. Safe and highly visible Hella marine optics deliver 100% correct light output and enhance visibility compared to bulb navigation lamps.
105mm
Note The electronics to drive and protect a NaviLED ®360 pole lamp are contained on a circuit board inside the aluminium tube that is sealed by heavy duty heat shrink insulation. This circuit board assembly measures 105mm from the bottom of the lamp’s aluminium base.
20
Fully sealed for life. IP 67 Certified Each NaviLED ® lamp is a completely sealed unit, highly UV and corrosion resistant. High impact housings ensure durability from waves and impact.
Surface mount
Fixed pole
Fold down base
Plug-in base
Robust surface mount with three mounting holes.
Robust fixed pole mount with two counter-sunk holes.
Lamp pole can be adjusted through 180 degrees and secured with locking collar. Removable wedge for different surface cambers.
Pole plugs into lamp base and is fixed into position with locking collar. Rubber cap covers hole when pole is removed.
Durable, energy efficient and internationally certified All Round LED signal lamps. Material Description
UV resistant, enhanced impact acrylic lens
Anodized aluminium lamp base and pole
Minimum Visible Distance
2 Nautical Miles
Cable
Pre-wired with 1.5m of twin core marine cable
Operating Voltage
MultivoltTM 9-33V DC
Voltage Protection
Spike protected to +500 volts
Reverse polarity protected to -500 volts
Power Consumption
< 1.5W
Degree of Protection
IP 67 - Completely Sealed
Weight
Surface Mount - 150g (including cable)
12” / 305mm Fold down pole mount - 300g (including cable)
Approvals
IMO COLREG, USCG, RINA (I), ABYC A-16
NMSC, Maritime NZ
BSH
IMO
IMO
RINA NMSC
A-16
IMO NZ
NMSC
USCG
COL REG 72
ABYC
AUSTRALIA
COL REG 72
MARITIME
AUSTRALIA
COL REG 72
MARITIME
NZ
a a
b
2 Nautical Mile All Round Lamps - Surface mount
Packaging for aftermarket presentation
Light Colour
Visibility
Black Base
White Base
White
2 NM
2LT 980 910-001
2LT 980 910-011
Red
2 NM
2LT 980 910-401
2LT 980 910-411
Green
2 NM
2LT 980 910-201
2LT 980 910-211
Dimensions a = 83mm / 3.27” b = 90mm / 3.54”
Dimensions a = 83mm / 3.27” b = 90mm / 3.54”
NaviLED ®360 Surface Mount Accessory Kit. For applications where access to the cable connection is required, or applications requiring frequent lamp installation and removal. Kit includes 1 x Base 1 x Cable clamp 1 x Connector block
Black Base
White Base
8HG 980 917-101
8HG 980 917-111
Lamp shown with surface mount accessory base
Ø 44
Ø 44
64
2 Nautical Mile All Round White Lamps - Fixed pole mount Overall Length
Visibility
Black Base
White Base
8” / 204mm
2 NM
2LT 959 910-011
2LT 959 910-111
34
34
75
75
20” / 500mm
2 NM
2LT 959 910-661
2LT 959 910-761
24” / 610mm
2 NM
2LT 959 910-631
2LT 959 910-731
34” / 850mm
2 NM
2LT 959 910-651
2LT 959 910-751
˚
2LT 959 910-721
90
White Base
2LT 959 910-621
90
Black Base
2 NM
˚ 90
Visibility
12” / 305mm
˚ 90
Overall Length
˚
2 Nautical Mile All Round White Lamps - Fold down pole mount
Ø 58 56
56
52
52
83
Packaging for aftermarket presentation
935
2 Nautical Mile All Round White Lamps - Plug-in pole mount Overall Length
Visibility
Black Base
White Base
24” / 610mm
2 NM
2LT 959 910-431
2LT 959 910-531
42” / 1070mm
2 NM
2LT 959 910-451
2LT 959 910-551
54 Ø30
58
21
64
0520 Series Position Lamps
Compact LED navigation lamps. Attractive, power saving and ultra reliable
Compact
Designed and manufactured in New Zealand, NaviLED 速 lamps save power onboard and provide outstanding durability. Ultra low current draw NaviLED 速 lamps use less than 10% of the power required to run a bulb navigation lamp of the same visible distance. Port and Starboard lamps consume less than 2 watts combined ! No bulbs, No maintenance. Ultra long service life Hella marine LED technology has no filaments to break making NaviLED 速 lamps extremely shock and vibration proof for reliability and safety in demanding conditions.
Mclay 588 Fisherman www.mclayboats.co.nz
MultivoltTM 8-28V DC Advanced electronics ensure reliable illumination and lamp protection even under severe voltage fluctuations and low battery voltages. Safe and highly visible Hella marine optics deliver 100% correct light output and enhanced visibility compared to bulb navigation lamps.
Sealed light engine clips into mounting shroud for an ultra secure attachment.
Rear of lamp clipped into shroud. Single core marine cable.
Fully sealed for life. IP 67 Certified Each NaviLED 速 lamp is a completely sealed unit. High impact housings ensure durability from waves and impact. Pre-wired with marine cable Single core (120mm) or twin core (2.5m) sheathed marine cable assemblies available. Ensures time saving, completely sealed installations. Internationally certified Meets the requirements of COLREG, USCG, ABYC A-16, RINA, NMSC, Maritime NZ.
22
Rear of lamp clipped into shroud. 2.5m twin core marine cable.
Durable, energy efficient and internationally certified navigation lamps c
a
d
Material Description
High impact shroud
b
ca
c
a da Dimensions a = 71mm / 2.80” b = 53mm / 2.09” b bc = 33mm / 1.30” d = 50 mm / 1.97”
UV resistant, enhanced impact resistant acrylic lens
d
Minimum Visible Distance
2 Nautical Miles (Yachts and Powerboats)
Cable
Pre-wired with marine cable
d Operating Voltage
MultivoltTM 8-28V DC
Voltage Protection
Spike protected to +500 volts Reverse polarity protected to -700 volts
b
Power Consumption
Port and Starboard less than 2W combined Stern less than 2W, Towing less than 2W
Dimensions a = 71mm / b = 53mm / c = 33mm / d = 50 mm /
DimensionsDimensions a = 71mm /a 2.80” = 71mm / 2.80” b = 53mm /b 2.09” = 53mm / 2.09” c = 33mm /c 1.30” = 33mm / 1.30” d = 50 mm /d 1.97” = 50 mm / 1.97”
Degree of Protection 2.80” 2.09” 1.30” 1.97”
BSH
IMO
IMO
RINA NMSC
A-16
IMO NZ
NMSC
COL REG 72
COL REG 72
AUSTRALIA
MARITIME
COL REG 72
USCG ABYC
AUSTRALIA
MARITIME
NZ
IP 67 - Completely Sealed
Weight
60g (including 120mm single core cable)
Approvals
IMO COLREG, USCG, RINA (I), ABYC A-16 NMSC, Maritime NZ
Single Lamps (with 120mm of single core marine cable) 2 Nautical Mile Powerboat and Yacht Lamps - Coloured outer lens Lamp Type
Visibility
Black Shroud
White Shroud
Port
2 NM
2LT 980 520-001
2LT 980 520-011
Starboard
2 NM
2LT 980 520-201
2LT 980 520-211
Towing
2 NM
2LT 980 520-601
2LT 980 520-611
2 Nautical Mile Powerboat and Yacht Lamps - Clear outer lens
Packaging for aftermarket presentation
Lamp Type
Visibility
Black Shroud
White Shroud
Port
2 NM
2LT 980 520-101
2LT 980 520-111
Starboard
2 NM
2LT 980 520-301
2LT 980 520-311
Stern
2 NM
2LT 980 520-501
2LT 980 520-511
Single Lamps (with 2.5m of twin core marine cable) 2 Nautical Mile Powerboat and Yacht lamps - Coloured outer lens Lamp Type
Visibility
Black Shroud
White Shroud
Port Starboard
2 NM 2 NM
2LT 980 520-031 2LT 980 520-231
2LT 980 520-041 2LT 980 520-241
2 Nautical Mile Powerboat and Yacht lamps - Clear outer lens Lamp Type
Visibility
Black Shroud
White Shroud
Port Starboard Stern
2 NM 2 NM 2 NM
2LT 980 520-131 2LT 980 520-331 2LT 980 520-531
2LT 980 520-161 2LT 980 520-361 2LT 980 520-541
Twin Pack Lamps Port and Starboard (with 120mm of single core marine cable) 2 Nautical Mile Powerboat and Yacht Lamps - Coloured outer lens Lamp Type
Visibility
Port & Starboard 2 NM
Black Shroud
White Shroud
2LT 980 520-801
2LT 980 520-811
2 Nautical Mile Powerboat and Yacht Lamps - Clear outer lens Packaging for aftermarket presentation
Lamp Type
Visibility
Port & Starboard 2 NM
Black Shroud
White Shroud
2LT 980 520-901
2LT 980 520-911
23
0620 Series Position Lamps
Compact deck mount LED navigation lamps. Attractive, power saving and ultra reliable
Deck Mount
Material Description
UV resistant, enhanced impact resistant acrylic lens High impact shroud
Minimum Visible Distance
2 Nautical Miles (Yachts and Powerboats)
Cable
Pre-wired with 500mm of twin core marine cable
Operating Voltage
MultivoltTM 8-28V DC
Voltage Protection
Spike protected to +500 volts
BSH
IMO
IMO
RINA NMSC
A-16
IMO NZ
NMSC
COL REG 72
Reverse polarity protected to -700 volts Power Consumption
Port and Starboard less than 2W combined
Degree of Protection
IP 67 - Completely Sealed
Weight
75g (including cable)
Approvals
IMO COLREG, USCG, RINA (I), ABYC A-16
COL REG 72
USCG ABYC
AUSTRALIA
MARITIME
COL REG 72
AUSTRALIA
MARITIME
NZ
NMSC, Maritime NZ
a
Dimensions:
a
c
Shroud
a = 90.0mm / 3.54” b = 38.5mm / 1.52”
b
b
c = 50.0mm / 1.97” Starboard from bow
Starboard from top
Starboard from starboard side
Optic Assembly
Twin Pack Lamps - Port and Starboard (with 500mm of twin core marine cable)
NaviLED ® with Coloured outer lens
2 Nautical Mile Powerboat and Yacht Lamps - Coloured outer lens Lamp Type
Visibility
Black Shroud
White Shroud
Port & Starboard
2 NM
2LT 980 620-801
2LT 980 620-811
NaviLED ® with Clear outer lens
Packaging for aftermarket presentation
24
2 Nautical Mile Powerboat and Yacht Lamps - Clear outer lens Lamp Type
Visibility
Black Shroud
White Shroud
Port & Starboard
2 NM
2LT 980 620-901
2LT 980 620-911
Bulb Navigation Lamps
Bulb Navigation Lamps 2492 Series Position Lamps
Port and Starboard Lamps for vertical surface mounting
IMO COL REG 72
AUSTRALIA
NMSC
1 Nautical Mile visibility. Impact resistant matt black or matt white housings. Rubber mounting base.
MARITIME
NZ
Housing Description UV and impact resistant plastic housing and lens Minimum Visible Distance 1 Nautical Mile Bulb 12V / 5W SV8.5 included Installation Vertical surface mount. Rubber mounting base. Approvals
NMSC, Maritime NZ
1 Nautical Mile Port and Starboard Lamps Lamp Type
Voltage
Black Housing
White Housing
Port
12V
2816
2816W
Starboard
12V
2817
2817W
Port and Starboard Pair
12V
2818
2818W
12V / 5W Bulb (L125) 24V / 5W Bulb (L245)
2492 Series Surface Mount All Round White Lamps These All Round White / Anchor Lamps are saltwater proof, non-magnetic and internationally approved.
IMO COL REG 72
BSH NMSC
IMO
USCG
MARITIME
RINA
A-16
AUSTRALIA
NZ
COL REG 72
Material Description UV and impact resistant plastic housing and lens Minimum Visible Distance 2 Nautical Mile Bulb 12V / 10W BA15s included Installation Horizontal surface mount. Includes stainless steel screws Degree of Protection IP 54 Approvals IMO COLREG, USCG, ABYC A-16, RINA(I) . NMSC, Maritime NZ
2 Nautical Mile All Round White / Anchor lamps Packaging for aftermarket presentation
Lamp Type
Voltage
Black Housing
White Housing
All Round / Anchor
12V
2875
2875W
2492 Series Spare Parts Seal
12V / 10W Bulb
9GD 111 684-001
(G1210) 24V / 10W Bulb (G2410)
26
68 Ă&#x2DC; 60
ABYC
Bulb Navigation Lamps 2010 Series Position Lamps
Compact, saltwater resistant and non-magnetic navigation lamps.
IMO
AUSTRALIA
NMSC
COL REG 72
IMO
NMSC
AUSTRALIA
MARITIME
BSH
IMO NZ
USCG
RINA
A-16
Material Description UV and impact resistant plastic housing and lens.
COL REG 72
. Anodized aluminium poles Minimum Visible Distance Port and Starboard 1 Nautical Mile . Masthead and Stern 2 Nautical Mile Bulb 12V / 10W SV8.5 included Installation Pre-wired with 100mm of cable
NZ
MARITIME
COL REG 72
ABYC
Degree of Protection IP X6 Approvals IMO COLREG, USCG, ABYC A-16, RINA(I) . NMSC, Maritime NZ 1 Nautical Mile Port Lamps Black Housing
White Housing
2LT 995 005-001
2LT 995 005-021
46
86
55
1 Nautical Mile Starboard Lamps Black Housing
White Housing
2LT 995 005-011
2LT 995 005-031
46
86
55
1 Nautical Mile Bi-Colour Lamps Chrome Housing
41
2LT 995 006-001 55
104
2 Nautical Mile Stern Lamps - Flush Mount Black Housing
White Housing
2LT 995 004-001
2LT 995 004-011
36 71
15
Ø 41
64
2 Nautical Mile Masthead Lamps Black Housing
White Housing
2LT 995 001-001
2LT 995 001-031
Ø44
51
50
2 Nautical Mile Masthead / Anchor Lamps - Fixed base Overall Length
Black Housing
White Housing
4" / 102mm
2LT 995 003-001
2LT 995 003-041
2 Nautical Mile Masthead / Anchor Lamps - Fold down base White Housing
2LT 995 003-021
2LT 995 003-061
20" / 508mm
2LT 995 003-031
2LT 995 003-071
9900˚ ˚
Black Housing
8" / 204mm
˚˚ 9900
2LT 995 003-021
Overall Length
56 56
52
2010 Series Spare Parts Lamp housing black Port
9EL 990 160-001
Starboard 9EL 990 160-011 Stern
9EL 990 159-001
Lens
12V / 10W Bulb
9EL 990 160-021
Bi-Colour 9EL 990 161-001
(N1210)
Starboard 9EL 990 160-031
Masthead 9EL 990 156-001
Lamp housing white Port Stern
9EL 990 159-011
27
Bulb Navigation Lamps 2010 Series All Round White / Anchor Lamps
Anchor lamps in a wide range of pole lengths and base types. Featuring heavy duty anodized aluminium poles and impact resistant bases, the 2010 series lamps are also saltwater resistant and Non-magnetic.
IMO IMO
Material Description UV and impact resistant plastic housing and lens. Anodized aluminium poles Minimum Visible Distance 2 Nautical Mile
BSH
MARITIME
IMO NZ
USCG
RINA
A-16
NZ
MARITIME
COL REG 72
Bulb 12V / 10W SV8.5 included Installation Pre-wired with 100mm of cable.
2LT 995 002-001
AUSTRALIA
NMSC
COL REG 72
2LT 995 002-131
AUSTRALIA
NMSC
COL REG 72
ABYC
Includes stainless steel screws Degree of Protection IP X6 Approvals IMO COLREG, USCG, ABYC A-16, RINA(I) . NMSC, Maritime NZ
2 Nautical Mile All Round White / Anchor lamps with fixed mount Voltage Overall Length
Black Base
White Base
12V
4" / 102mm
2LT 995 002-001
2LT 995 002-131
12V
8" / 204mm
2LT 995 002-011
2LT 995 002-141
Ø 44 Ø 44
64
34
Robust fixed mount with two counter-sunk holes.
34
75
75
2LT 995 002-151
2LT 995 002-051
2LT 995 002-181
12V
20" / 508mm
2LT 995 002-031
2LT 995 002-161
12V
24" / 610mm
2LT 995 002-321
2LT 995 002-121
56
˚
˚
Lamp pole can be adjusted through 180 degrees and secured at desired angle with locking collar. Removable wedge for installation onto different surface cambers.
˚
12" / 305mm
90
2LT 995 002-151
12V
90
2LT 995 002-021
90
White Base
8" / 204mm
90
Black Base
12V
˚
2 Nautical Mile All Round White / Anchor lamps with fold down pole mount Voltage Overall Length
56
52
52
2LT 995 002-031 Ø 48
2 Nautical Mile All Round White / Anchor lamps with plug-in pole mount Voltage Overall Length
Black Base
White Base
12V
24" / 610mm
2LT 995 002-041
2LT 995 002-171
12V
36" / 914mm
2LT 995 002-061
2LT 995 002-191
12V
42" / 1066mm
2LT 995 002-071
2LT 995 002-201
12V
48" / 1220mm
2LT 995 002-081
2LT 995 002-211
12V
54" / 1350mm
2LT 995 002-091
2LT 995 002-221
64
610
80
Pole plugs into lamp base and is fixed into position with locking collar. Rubber cap covers hole when pole is removed.
2010 Series Spare Parts Lamp housing black.
Rubber cap black.
Plug-in base black
Fold down base black
12V / 10W Bulb
9EL 990 157-001
To suit Plug-in base
8HG 992 157-021
8HG 992 158-001
(N1210)
28
Lamp housing white.
Rubber cap white.
Plug-in base white
Fold down base white
9EL 990 157-011
To suit Plug-in base
8HG 992 157-031
8HG 992 158-011
9GH 992 157-051
61
Ø30
2LT 995 002-101
9GH 992 157-041
55
64
Bulb Navigation Lamps 3562 Series Position Lamps
Compact and proven navigation lamps for yachts and powerboats. Saltwater resistant and Non-magnetic, 3562 series lamps feature a 'snap lock' housing allowing bulbs to be changed without tools.
IMO COL REG 72
AUSTRALIA
NMSC
IMO
NMSC
AUSTRALIA
MARITIME
BSH
IMO NZ
USCG
RINA
A-16
COL REG 72
MARITIME
COL REG 72
NZ
ABYC
Material Description UV and impact resistant plastic housing and lens Minimum Visible Distance Port and Starboard 1 NM Masthead and Stern 2 NM Bulb 12V / 10W SV8.5 included Installation Vertical surface mount. Mounting base available Cable Entry Through base plate with rubber grommet Degree of Protection IP 54 Approvals IMO COLREG, USCG, ABYC A-16, RINA(I) . NMSC, Maritime NZ 63
1 Nautical Mile Powerboat and Yacht Lamps Lamp Type
Voltage
Black Housing
White Housing
Port
12V
2843
2843W
Starboard
12V
2842
2842W
Bi-Colour
12V
2871
2871W
53
75
2 Nautical Mile Powerboat and Yacht Lamps Packaging for aftermarket presentation
Lamp Type
Voltage
Black Housing
White Housing
Stern
12V
2841
2841W
2 Nautical Mile Powerboat Lamps Lamp Type
Voltage
Black Housing
White Housing
Masthead**
12V
2840
2840W
** for Powerboats and Sailing Yachts under Motor
3562 Series Spare Parts Lamp housing white Port
9EL 122 562-111
Starboard 9EL 122 562-101 Stern
9EL 122 562-091
Masthead
9EL 122 562-081
12V / 10W Bulb (K1210) 24V / 10W Bulb (K2410)
29
Bulb Navigation Lamps 2984 Series Position Lamps
Internationally approved navigation lamps. Non-magnetic and saltwater resistant. Housing 'snaps' to base without screws. 2984 series navigation lamps feature a vertically hanging bulb and contacts in the upper area of each lamp to prevent corrosion.
IMO
AUSTRALIA
NMSC
COL REG 72
IMO
NMSC
AUSTRALIA
MARITIME
BSH
IMO NZ
USCG
RINA
A-16
COL REG 72
NZ
MARITIME
COL REG 72
ABYC
Material Description UV and impact resistant plastic housing and lens Minimum Visible Distance Port, Starboard and Stern 2 NM, . Masthead 3 NM
107
Bulb 12V / 25W or 24V / 25W BAY15d included Installation Vertical surface mount Cable Entry Through base plate with rubber grommet
108
Degree of Protection IP 55 Approvals IMO COLREG, BSH, USCG, ABYC A-16, RINA(I) . NMSC, Maritime NZ
107
2 Nautical Mile Powerboat and Yacht Lamps
Packaging for aftermarket presentation
Lamp Type
Voltage
Black Housing
Port
12V
2854
Port
24V
2854-1
Starboard
12V
2853
Starboard
24V
2853-1
Bi-Colour
12V
2852
Bi-Colour
24V
2852-1
Stern
12V
2851
Stern
24V
2851-1
Towing
12V
2828
Towing
24V
2828-1
White Housing 108
2854W 2853W 2852W 2851W
3 Nautical Mile Powerboat Lamps Lamp Type
Voltage
Black Housing
White Housing
Masthead**
12V
2850
2850W
Masthead**
24V
2850-1
** for Powerboats and Sailing Yachts under Motor
2984 Series Spare Parts Lamp housing white Port
9EL 127 083-101
Lamp housing white Starboard 9EL 127 083-091
Lamp housing white Bi-Colour 9EL 127 083-111 Lamp housing white Masthead 9EL 127 083-071 Stern
30
9EL 127 083-081
Bulbs 12V / 25W (EA1225) 24V / 25W (EA2425)
90
90
Bulb Navigation Lamps 2984 Series Tri Colour Lamps
Tri Colour lamps, and Tri Colour lamps with an integrated All Round White / Anchor Lamp for attachment to yacht masts. Non-magnetic and saltwater resistant. The lamp housing features a bayonet lock for easy bulb change.
IMO COL REG 72
AUSTRALIA
NMSC
IMO
NMSC
AUSTRALIA
MARITIME
BSH
IMO NZ
USCG
RINA
A-16
COL REG 72
MARITIME
COL REG 72
NZ
ABYC
Material Description UV and impact resistant plastic housing and lens Minimum Visible Distance Port and Starboard 2 NM, Stern 2 NM, All Round White / Anchor 2 NM
88
Bulb 12V BAY15d included Installation Horizontal surface mount Cable Entry Through base plate with rubber grommet
107
Degree of Protection IP 55 Approvals IMO COLREG, BSH, USCG, ABYC A-16, RINA(I) . NMSC, Maritime NZ
2 Nautical Mile Tri Colour Lamp
Packaging for aftermarket presentation
Lamp Type
Voltage
Black Housing
Tri Colour
12V
2844
88
200
2 Nautical Mile Tri Colour Lamp with All Round White Lamp Type
Voltage
Black Housing
Tri Colour / Anchor Lamp
12V
2845
2984 Series Spare Parts Bulb 12V Tri-Colour lamp
(EA1225)
Tri-Colour with Anchor lamp
(EA1225)
(EA1210)
Bulb 24V Tri-Colour lamp
(EA2425)
Tri-Colour with Anchor lamp
(EA2425)
(EA2410) 31
Bulb Navigation Lamps 2984 Series All Round Lamps
IMO COL REG 72
BSH approved, saltwater resistant and non-magnetic, they feature a bayonet lock on the lamp housing for easy bulb change. Designed for permanent installation or hoisting up masts.
IMO
NMSC
AUSTRALIA
MARITIME
BSH
IMO NZ
USCG
RINA
A-16
COL REG 72
MARITIME
COL REG 72
Material Description UV and impact resistant plastic housing and lens Minimum Visible Distance 2 Nautical Mile
88
Bulb 12V / 25W or 24V / 25W BAY15d included Installation Horizontal surface mount Cable Entry Through base plate with rubber grommet
107
Degree of Protection IP 55 Approvals IMO COLREG, BSH, USCG, ABYC A-16, RINA(I) . NMSC, Maritime NZ
2 Nautical Mile All Round White / Anchor Lamps
Packaging for aftermarket presentation
Lamp Type
Voltage
Black Housing
White Housing
All Round White / Anchor
12V
2846
2846W
All Round White / Anchor
24V
2846-1
2 Nautical Mile All Round Red Lamps Lamp Type
Voltage
Black Housing
All Round Red
12V
2848
All Round Red
24V
2848-1
2 Nautical Mile All Round Green Lamps Lamp Type
Voltage
Black Housing
All Round Green
12V
2847
All Round Green
24V
2847-1
All Round White / Anchor lamps with optional Strobe function. The Hella marine 'Easy Fit' system allows simple removal of the lamps without tools and without having to remove the cable. This anchor lamp model also has an additional flashing strobe function to attract attention in emergencies. Housing Description UV and impact resistant plastic housing and lens 88
Minimum Visible Distance 2 Nautical Mile Bulb 12V / 10W BAY15d included Strobe 12V Xenon strobe included (60 flashes per minute) Installation Horizontal surface mount
171
Cable Entry Through base plate with rubber grommet Degree of Protection IP 55 Approvals IMO COLREG, BSH, USCG, ABYC A-16, RINA(I) . NMSC, Maritime NZ 2 Nautical Mile All Round White Anchor Lamps Lamp Type
Voltage
Black Housing
Anchor Lamp Anchor / Strobe
12V 12V
2LT 002 984-801 2LT 002 984-811 2LT 002 984-821 2LT 002 984-831
White Housing
2984 Series Spare Parts
32
AUSTRALIA
NMSC
Bulb 12V
Bulb 24V
All Round White / Anchor
(EA1210)
All Round White / Anchor
(EA2410)
All Round Red
(EA1225)
All Round Red
(EA2425)
All Round Green
(EA1225)
All Round Green
(EA2425)
NZ
ABYC
LED Deck Floodlights
Introduction LED Deck Floodlights
LED Deck Floodlight Technology Hella marine LED deck floodlights provide efficient, power saving and ultra durable illumination for reliability and safety at sea. Benefits of LED lighting technology: Ultra Low Power Consumption Combining efficient LED light sources with advanced optic technology, Hella marine LED products deliver more light output per watt than traditional bulb lamps and provide considerable energy savings. As an example, Hella marine LED Module 70 lamps use less than 30% of the power required to run a 55W H3 incandescent bulb floodlight (eg Hella marine 7118 series.) No bulbs, No maintenance. Ultra long service life Hella marine LED technology has no filaments to break, making the lamps extremely shock and vibration resistant for reliable illumination and safety. Our engineering team has developed a unique range of highly demanding tests to lift product reliability to new standards. Ultra low heat signature for improved safety All Hella marine LED lamps featuring an ultra low heat signature due to their low power consumption. This provides many safety and installation advantages as the risks of heat damage to materials or people caused by traditional halogen lamps are completely eliminated. Fully sealed for life Each Hella marine LED lamp is a completely sealed opto-electronic device. Proven design, precision engineering, and the use of high impact acrylic materials ensures superior resistance to water, impact, UV and general wear and tear. Pre-wired with marine cable Hella marine LED lamps are pre-wired with quality marine specification tinned cable. The cable is completely sealed to the lamp body providing time saving at installation and reliable electrical connection. MultivoltTM technology for durability and safety Advanced MultivoltTM circuitry provides a uniform level of intensity for reliable and safe illumination across a range of DC inputs such as 8-28 volts or 9-33 volts. MultivoltTM LED lamps can be connected to 12 or 24 volt systems without modification, providing full light performance and automatic compensation for low battery voltages and voltage drop over long cables and connections. Hella marine MultivoltTM LED lamps are also reverse polarity and spike protected for enhanced durability even under severe voltage fluctuations. Electromagnetic Compatibility (EMC) All Hella marine LED products are electronic devices. Their electrical circuits contain components that suppress possible interference, both emission as well as susceptibility to emissions, to the limits prescribed in international standards.
34
Since 1925, Hella marine has been an international pioneer of high quality deck lighting. Today, Halogen, Xenon and LED based technology all feature advanced lens, optic and reflector designs, stainless steel mounting hardware, impact resistant components and durable construction for enhanced safety and reliability at sea.
LED Module 70 series
The future of efficient and durable deck lighting is LED based. Compared to traditional halogen bulb based lamps, the energy saving and improved reliability benefits on offer with quality LED lamps are clear. Hella marine LED Mega Beam and LED Module 70 series lamps illuminate cockpit and deck areas with crisp white light for only 15W of power consumption. This represents significant savings compared to the 55W consumed by 12V halogen floodlights running H3 bulbs. These power savings are possible due to highly efficient LEDs and optics to provide more light output per watt than halogen based floodlights. Effective lens and optic engineering play an important role to capture and spread the available light onto effective working surfaces without glare or eye strain.
LED Sea Hawk series
Advances in the luminous efficiency of white LED devices have opened doors to the development of a new and unique class of Hella marine LED floodlight. The LED Sea Hawk series offers ultra lightweight and ultra efficient performance in a compact housing to compliment the shapes and installations spaces available on todayâ&#x20AC;&#x2122;s vessels. Reliability and strength is further enhanced via the high performance Grilamid ÂŽ lens. Consuming less than 3W and offering an impressive 240 lumens, the Sea Hawk series is highly efficient, completely sealed and has a very cool surface temperature.
Hall Spars Hella marine LED Masthead / Floodlight installation www.hallspars.com
35
6136 Series LED Mega Beam
LED Mega Beam Durable, energy saving LED floodlights
Intense, close range LED deck floodlights with all the reliability and power saving advantages of Hella marine LED technology. Power consumption is a low 15W (1.25A @ 12V) providing substantial power savings onboard. MultivoltTM electronics provide consistent illumination and circuit protection across a range of inputs from 9-30V DC for an ultra long service life.
c
a
d
b
Ultra reliable LED technology enabled the design of a compact marine floodlight suitable for applications subject to high vibration, impact and shock loads, all a in a completely sealed housing that needs no service. Supplied with stainless steel mounting hardware and pre-wired with 2m of marine cable.
Dimensions: a = 110mm / 4.33” b = 145mm / 5.70” c = 83mm / 3.27” d = 120mm / 4.72”
c
d
b
Dimensions: a = 110mm / 4.33” b = 145mm / 5.70” c = 83mm / 3.27” d = 120mm / 4.72”
Rayglass Legend 2300 www.rayglass.co.nz
Material Description
UV and impact resistant plastic front housing
.
Die cast aluminium body, Glass lens
Bracket
316 stainless steel
Colour Temperature
6500K
Cable
Pre-wired with 2.0m of twin core marine cable
Operating Voltage
MultivoltTM 9-30V DC
Degree of Protection
IP 67 - Completely Sealed
Power Consumption
15W (<1.25A@12V / <0.63A@24V)
Weight
750g (including cable)
Light Output
600 lumens
Approvals
CE - Completely sealed housing & cable entry - Pre-wired with marine cable
.
6136 Series LED Deck Floodlights
Packaging for aftermarket presentation
36
Voltage
Housing Colour
Part Number
9-30V DC
White Housing
1GM 996 136-121
9-30V DC
Black Housing
1GM 996 136-181
Me
tre
s
6176 Series LED Module 70
LED Module 70 Durable and efficient LED floodlights offering power saving illumination
Capitalizing on the electronic and optical performance of the larger body LED Mega Beam series, Hella marine Module 70 LED lamps offer state of the art technology and performance in a smaller housing. Offering 600 lumens of crispDimensions: white light for a low power consumption of 15W (1.25A @ 12V), a = 83mm / 3.27” = 110mm / 4.33” the compact high technologyb lamps provide c = 74mmto 55W / 2.91” substantial power savings compared d = 83mm / 3.27” halogen lamps.
c
a
d
b
The completely sealed module 70 series provides ultra durable ‘fit and forget’ advantages with ongoing reliability in applications subject to high vibration, impact and shock loads.
Dimensions: a = 83mm / 3.27” b = 110mm / 4.33” c = 74mm / 2.91” d = 83mm / 3.27”
Rayglass Protector 11m www.rayglass.co.nz
Material Description
UV and impact resistant plastic front housing
.
Die cast aluminium body, Glass lens
Bracket
316 stainless steel
Colour Temperature
6500K
Cable
Pre-wired with 2.0m of twin core marine cable
Operating Voltage
MultivoltTM 9-30V DC
Degree of Protection
IP 67 - Completely Sealed
Power Consumption
15W (<1.25A@12V / <0.63A@24V)
Weight
500g (including cable)
Light Output
600 lumens
Approvals
CE
b
- Completely sealed housing & cable entry - Pre-wired with marine cable
.
6176 Series LED Deck Floodlights
Packaging for aftermarket presentation
Voltage
Housing Colour
Part Number
9-30V DC
White Housing
1GO 996 176-731
9-30V DC
Black Housing
1GO 996 176-722
Me
tre
s
37
0670 Series LED Sea Hawk
LED Sea Hawk A new class of ultra efficient, compact and lightweight LED lamps
Completely sealed and weighing a mere 250 grams (including cable), Sea Hawk LED lamps are a brand new class of energy saving, compact, lightweight, and ultra durable luminaires that can be installed almost anywhere onboard, interior or exterior.
Rayglass Legend 2800 www.rayglass.co.nz
Sea Hawk lamps contain friction mounts and can be easily adjusted up and down without tools.
Power consumption is low at less than 3W, (<0.25A@12V / <0.13A@24V) yet Sea Hawk lamps offer 240 lumens of crisp white light. Manufactured in New Zealand from advanced marine grade materials, Sea Hawk lamps utilise a high performance Grilamid® Polyamide lens for superior strength and resistance to impact and UV. The housing is a tough, proven, high impact plastic offering outstanding UV resistance. The mounting bracket is highly polished 316 marine grade stainless steel. 2.5m of tinned ‘twin core’ marine cable is sealed and pre-wired into each lamp for absolute water tightness and reliable electrical connections. Integrated MultivoltTM electronics provide protection from reverse polarity, voltage spikes and low battery voltages and ensure reliable operation at full brightness across a range of input voltages from 9-33V DC. Hella marine precision optics provide two light pattern options for this series. Spread lamps are suited for illuminating cockpits and transom areas with a close range, wide spread of
light. Spot lamps offer a narrower and more concentrated light pattern for applications such as spreader lighting on yacht masts. The low profile 316 stainless mounting bracket secures the lamp body from both sides and allows easy adjustment of the vertical light beam angle. Effective retention in the innovative fastening design will hold the lamp steady at varying angles without the need to adjust fastenings. Hella marine Sea Hawk series lamps represent the latest in energy efficiency and maintenance free ‘fit and forget’ technology.
Sea Hawk Deck Lamp Spot
Me
tre
s
Sea Hawk Deck Floodlight Spread
Me
tre
s
Red light Hella marine Sea Hawk lamps offer maximum night vision preservation. Ocean racers, professional sports fisherman and commercial operators recognise the ‘non glare’ night vision preserving advantages of red Sea Hawk lamps together with their energy saving and durability.
38
- Why red light does not affect our night vision. The human eye contains two types of receptors, the rods and the cones. Rods and cones have an increased sensitivity to frequency bands at different ends of the visual spectrum. Rods are largely responsible for our day time and colour vision and have an increased sensitivity towards the red band of the visual spectrum. Cones are responsible for our night vision capability and have an increased sensitivity towards the blue, shorter wavelength band of the visual spectrum. For this reason red light will not affect the sensitivity of the cones and with that our night vision is not affected by the use of red light in the cabin.
Hella marine Sea Hawk. A new class of ultra efficient, compact and lightweight LED lamps.
Packaging for aftermarket presentation
Material Description
UV and impact resistant plastic
.
Heavy duty Grilamid® lens
Bracket
Polished 316 stainless steel
Colour Temperature
5500K (White) 1600K (Red)
Cable
Pre-wired with 2.5m of twin core marine cable
Operating Voltage
White Lamps - MultivoltTM 9-33V DC
.
Red Lamps - 12V DC
Degree of Protection
IP 67 - Completely Sealed
Power Consumption
<3W (<0.25A@12V / <0.13A@24V)
Weight
250g (including cable)
Light Output
White Lamps - 240 lumens
.
Red Lamps - 50 lumens
Approvals
CE c
a
b
d
Dimensions a = 136mm / b = 53mm / c = 49mm / d = 42mm /
5.35” 2.09” 1.93” 1.65”
0670 series LED Deck Lamps - Spot Voltage
Housing Colour
Part Number
9-33V DC
Black Housing
2LT 980 670-201
9-33V DC
White Housing
2LT 980 670-211
Sea Hawk Deck Lamp Spot
Me
tre
s
0670 series LED Deck Floodlights - Spread Voltage
Housing Colour
Part Number
9-33V DC
Black Housing
2LT 980 670-301
9-33V DC
White Housing
2LT 980 670-311
Sea Hawk Deck Floodlight Spread
Me
tre
s
0670 series LED Deck Floodlights - Spread - Red Light Voltage
Housing Colour
Part Number
12V DC
Black Housing
2LT 980 670-341
12V DC
White Housing
2LT 980 670-351
Red Sea Hawk Deck Floodlight Spread
Me
tre
s
39
LED Deck Floodlight Comparison
1 x LED Sea Hawk
2 x LED Sea Hawkâ&#x20AC;&#x2122;s
240 lumen output
480 lumen output
Total Power Consumption
Less than 3 watts ! <3W (<0.25A@12V / <0.13A@24V)
1 x LED Mega Beam
600 lumen output
Total Power Consumption
Total Power Consumption
<6W (<0.5A@12V / <0.25A@24V)
15W (<01.25A@12V / <0.63A@24V)
Less than 6 watts !
Less than 15 watts !
Mclay 588 Fisherman www.mclayboats.co.nz
Light intensity and pattern comparisons between Hella marine LED floodlights on a 6 metre / 20 foot aluminium boat.
40
HID (Xenon) and Halogen Deck Floodlights
41
Deck Floodlights Introduction
Xenon Gas Discharge (HID) Technology HID Deck Floodlights differ from traditional bulb versions. Instead of light being created by passing current through a filament to make it glow, light is created by an arc in a tube filled with a mixture of xenon gas and metal salts. The light arc is shock proof as there is no filament to break. A compact 12V or 24V DC electronic ballast is used to ignite the HID bulb and provide constant levels of light output, even if the vessel’s voltage supply fluctuates by up to 10%. The advantages of using Xenon Gas Discharge (HID) deck floodlights in comparison to halogen versions include: • 2.5 times the luminous flux (light output) and 35% less power consumption. • Increased luminance results in a brighter and larger illumination of working areas. • Light spectrum is similar to daylight – for natural colour reproduction of the environment. • Vibration resistant light arc instead of a fragile filament. • Service life up to five times longer – reduced expenditure for bulb replacement. • Constant brightness – independent of fluctuations of up to 10% in the supply voltage. • Only 42W power consumption – less strain on the vessel's power supply.
Free Form reflector with Gas Discharge (HID)
Important information concerning mounting and operation of Xenon Gas Discharge (HID) technology. •H ID deck floodlights are supplied with a wiring harness, relay and fuse. The startup current of 20A (for 12V) or 10A (for 24V) requires a relay under all circumstances. A 20A fuse is required for 12V systems, a 15A fuse for 24V systems. •C omplete the electrical connection only with wiring harness supplied. When extending the wiring harness, sufficient cross section must be ensured. The internal resistance of the electrical connection (including relay, fuse and earth lead) between ballast and battery, must not exceed 150W (for 12V) or 300W (for 24V) under all circumstances. If the resistance is higher, the current of 20A (for 12V) or 10A (for 24V) required for ignition of the light arc cannot be reached. Inefficient ignition use can cause damage to the electronic ballast. • I gnition problems can occur when a number of Xenon lamps are started simultaneously. This can result in damage to the electronic ballasts. For this reason it is strongly recommended to activate the lamps sequentially with a short time delay of approximately 5-20 seconds depending on the vessels electrical system.
Scott Robson 50ft Sportfisher Cerveza II. Image provided by New Zealand Professional Skipper Magazine. www.skipper.co.nz
42
Deck Floodlights 6142 and 8534 HID (Xenon) Deck Floodlights
Xenon Gas Discharge (HID)
More light, greater safety, less power consumption, longer life and proven reliability in tough working conditions. Hella marine HID floodlights use a D2S Xenon bulb that provides up to 5 times the service life of a traditional halogen bulb. Due to advanced ‘Free Form’ reflector technology, Hella marine HID floodlights have 2.5 times the light output of halogen floodlights. HID floodlights produce a white light very close to daylight, with a greater range and extremely wide deck illumination. The safety benefits of increased natural white light include easier viewing in dark working conditions and dramatically reduced eye strain. A compact 12V or 24V DC electronic ballast provides constant levels of light output, even if the vessel’s voltage supply fluctuates by up to 10%. In addition, HID floodlights place less strain on the vessel's electrical system than halogen deck floodlights - total consumption is 42W - 35W for the bulb, 7W for the ballast.
M
es etr
Housing Description
UV and impact resistant plastic housing
Replacement Bulb Type -
Bulb
35W D2S bulb included
Mounting
Upright mounting
D2S 35W (XN4000)
Degree of Protection
IP 5K4
Maximum Output
Approx. 42W (12V) or 41W (24V)
Operating Voltage
12V DC
9 - 16V
24V DC
18 - 32V
6142 Series HID Deck Floodlights with Integrated Ballast
Spare Parts
Voltage
Housing Colour
Part Number
12V
White Housing
281536
9.1536.01 Close range insert
24V
White Housing
281538
9.1538.01 Far reaching insert
163 50
160
150 191
62
54 6.5
69.5
27
8534 Series HID Deck Floodlights with Remote Ballast Voltage
Housing Colour
Spare Parts 9.1534.01 9.1534.03 9.1535.03 9.1517.08
Part Number
12V
White Housing
281534
24V
White Housing
281535
350
24
'FF' insert 12V Ballast 24V Ballast Bracket
93
43
101 84
127
120 24
112
140
43
Deck Floodlights 7118 Series Halogen
7118 Series Fibre reinforced housing and Free Form reflector for close range homogeneous illumination.
- Hella 'Free Form' reflector technology - Sealed cable entry gland and pre-wired cable option - Structured or Crystal Clear lens option Off White Housing Structured Lens
Black Housing Structured Lens
- Extended front edge for lens protection - 316 Stainless steel mounting hardware
Housing Description
UV and impact resistant plastic housing
Bulb
12V / 55W H3 bulb included
Mounting
Upright mounting
Cable Entry
Sealed cable entry gland
Pre-wired twin core marine cable.
Degree of Protection
IP X4
Maximum Output
12V / 55W or 24V / 70W
.
Me
Note - Not suitable for 100W bulbs
tre
s
77
155
94
128
Sealed cable entry gland with nut option. Pre-wired with 220mm of twin core marine cable
Ice White Housing Crystal Clear Lens Sealed cable entry gland
7118 Series Halogen Deck Floodlights Voltage Housing Colour
Lens
Cable Entry
Part Number
12V
Off White
Structured Lens
Rubber Grommet
2859
12V
Black
Structured Lens
Rubber Grommet
1519
12V
Off White
Structured Lens
Cable Gland
1GA 007 118-051
12V
Ice White
Structured Lens
Cable Gland
1GA 007 118-101
12V
Ice White
Clear Lens
Cable Gland
1GA 007 118-081
12V
Black
Structured Lens
Cable Gland
1GA 007 118-091
Bracket
Replacement Bulb Type -
Stainless steel bracket for
PK22s
stabilized mounting in areas
12V / 55W (YC1255)
subject to vibration.
24V / 70W (YC2470)
Spare Part 9.2859.02 'FF' insert
9.1517.08
44
Deck Floodlights 8518 and 6082 Series Halogen
8518 Series - Flush Mount
45
155
White fibre reinforced housing and Free Form reflector for close range homogeneous illumination.
94
- Seal between frame and attachment surface - Cable entrance through rubber grommet - Large 135 x 75mm light aperture - 316 stainless steel screws
Replacement Bulb Type PK22s 12V / 55W (YC1255) 24V / 70W (YC2470)
Housing Description
UV and impact resistant plastic housing
Bulb
12V / 55W H3 bulb included
Mounting
Recess mount - Front inclination 5 degrees
Cable Entry
Terminals at rear of reflector
Degree of Protection
IP X4
Maximum Output
12V / 55W or 24V / 70W
.
Note - Not suitable for 100W bulbs
Me
tre
s
8518 Series Flush Mount Halogen Deck Floodlight Voltage
Housing Colour
Lens
Part Number
12V
Off White
Structured Lens
2860
Spare Part 9.2859.02 'FF' insert
6082 Series - Ultra Flush Mount
60
176
White fibre reinforced housing and Free Form reflector for close range homogeneous illumination.
116
- Seal between frame and attachment surface - Cable entrance through rubber grommet - Large 135 x 75mm light aperture
Replacement Bulb Type PK22s 12V / 55W (YC1255) 24V / 70W (YC2470)
Housing Description
UV and impact resistant plastic housing
Bulb
12V / 55W H3 bulb included
Mounting
Recess mount - Front inclination 5 degrees
Cable Entry
Terminals at rear of reflector
Degree of Protection
IP X4
Maximum Output
12V / 55W or 24V / 70W
.
Note - Not suitable for 100W bulbs
Me
tre
s
8518 Series Flush Mount Halogen Deck Floodlight Voltage
Housing Colour
Lens
Part Number
12V
White
Structured Lens
1GA 996 082-091
Spare Part 9.2859.02 'FF' insert
45
Deck Floodlights 8541 and 8542 Series Halogen
8541 Series Wide spread close range illumination with double Free Form reflector. White fibre reinforced plastic housing with extended front edge to protect lens.
106
158
120
- Twin Hella 'Free Form' reflector technology - Triple the light output compared to conventional lamps of the same size - Large 145 x 83mm light aperture
Replacement Bulb Type -
- Extended front edge for lens protection
PK22s 12V / 55W (YC1255) 24V / 70W (YC2470)
- 316 Stainless steel mounting hardware
Housing Description
UV and impact resistant plastic housing
Bulb
2 x 12V / 55W H3 bulbs included
Mounting
Upright mounting
Cable Entry
Pre-wired with 110mm of cable
Degree of Protection
IP 54
Maximum Output
2 x 12V / 55W or 2 x 24V / 70W
.
Note - Not suitable for 100W bulbs
Me
8541 Series Halogen Deck Floodlight
Bracket
Voltage
Housing Colour
Part Number
12V
White Housing
2830
Stainless steel bracket for stabilized mounting in areas subject to vibration. 9.1517.08
tre
s
Spare Part 9.1531.01 ‘FF’ insert
8542 Series - Flush Mount Wide spread close range illumination with double Free Form reflector. Flush mount fibre reinforced plastic housing with extended front edge to protect lens.
109 77
187
107
- Twin Hella 'Free Form' reflector technology - Triple the light output compared to conventional deck lamps of the same size - Extended front edge for lens protection - Large 145 x 83mm light aperture
Replacement Bulb Type PK22s 12V / 55W (YC1255) 24V / 70W (YC2470)
- 7° upwards or downwards inclination
Housing Description
UV and impact resistant plastic housing
Bulb
2 x 12V / 55W H3 bulbs included
Mounting
Recess Mount. Pre-wired with 250mm of cable
Degree of Protection
IP 54
Maximum Output
2 x 12V / 55W or 2 x 24V / 70W
Note - Not suitable for 100W bulbs
Me
8542 Series Flush Mount Halogen Deck Floodlight
46
Voltage
Housing Colour
Part Number
12V
White Housing
1GB 998 542-001
tre
s
Deck Floodlights 8517 Series Halogen
8517 Series 112
White fibre reinforced housing and Free Form reflector for close range homogeneous illumination.
97
126
- Hella 'Free Form' reflector technology - Compact design - Illuminates large areas of deck or superstructure - Glass lens bonded with reflector to be dust and moisture resistant - Sealed cable entry via 2 pin plug
Replacement Bulb Type -
- 316 Stainless steel mounting hardware
PK22s 12V / 55W (YC1255) 24V / 70W (YC2470)
Housing Description
UV and impact resistant plastic housing
Bulb
12V / 55W H3 bulb included
Mounting
Upright mounting
Cable Entry
2 PIN AMP connector (AMP 180923)
Degree of Protection
IP 6K 9K
Maximum Output
12V / 55W or 24V / 70W
Note - Not suitable for 100W bulbs
Me
tre
s
8517 Series Halogen Deck Floodlight
Bracket
Voltage
Housing Colour
Part Number
12V
White Housing
2833
Stainless steel bracket for stabilized mounting in areas subject to vibration. 9.1517.08 Spare Part 9.1533.01 ‘FF’ insert 9.6008.05 Rubber boot for AMP connection 9.6008.06 Wiring loom for AMP connection, 2.0m
112
8517 Series - Flush Mount White fibre reinforced housing and Free Form reflector for close range homogeneous illumination.
42
46
101 101
- Hella 'Free Form' reflector technology - Compact design
Replacement Bulb Type -
- Illuminates large areas of deck or superstructure - Glass lens bonded with reflector to be dust and moisture resistant - Sealed cable entry via 2 pin plug
Housing Description
UV and impact resistant plastic housing
Bulb
12V / 55W H3 bulb included
Mounting
Recess Mount
Cable Entry
2 PIN AMP connector (AMP 180923)
Degree of Protection
IP 6K 9K
Maximum Output
12V / 55W or 24V / 70 W
.
Note - Not suitable for 100W bulbs
PK22s 12V / 55W (YC1255) 24V / 70W (YC2470)
Me
tre
s
8517 Series Flush Mount Halogen Deck Floodlight Voltage
Housing Colour
Part Number
Spare Part
12V
White Housing
2834
9.1533.01 ‘FF’ insert
47
Deck Floodlights 6361 Series Halogen
6361 Oval 100 Series White fibre reinforced housing and Free Form reflector for close range homogeneous illumination. Sturdy housing design for use under heavy duty conditions.
160
96
100
129 80
- Extended front edge for lens protection - Glass lens bonded with reflector to be dust and moisture resistant 45
- 316 Stainless steel mounting hardware - Sealed cable entry via threaded gland with nut
Replacement Bulb Type -
- Suitable for applications subject to heavy vibration
PK22s 12V / 55W (YC1255) 24V / 70W (YC2470)
- Upright or pendant mounting. Can be rotated through 180°
Housing Description
UV and impact resistant plastic housing
Bulb
12V / 55W or 24V / 70W H3 bulb included
Mounting
Upright mounting
Cable Entry
Pre-wired with 300mm of cable
Degree of Protection
IP 6K 9K
Maximum Output
12V / 55W or 24V / 70W
Note - Not suitable for 100W bulbs
Me
tre
s
Sealed cable entry gland with nut. Pre-wired with 300mm of twin core marine cable.
6361 Series Halogen Deck Floodlight
Bracket
Voltage Housing Colour
Part Number
12V
White Housing
1GA 996 361-131
24V
White Housing
1GA 996 361-391
Stainless steel bracket for stabilized mounting in areas subject to vibration. 9.1517.08 Spare Part 9.1540.01 ‘FF’ insert
6361 Oval 100 Series - Flush Mount
120 120
White fibre reinforced housing and Free Form reflector for close range 105 homogeneous illumination. Sturdy housing design for use under heavy duty conditions.
74
30
105
30
11
150 150 165 165
- Extended front edge for lens protection - Glass lens bonded with reflector to be dust and moisture proof
PK22s 12V / 55W (YC1255) 24V / 70W (YC2470)
- Suitable for applications subject to heavy vibration
Housing Description
UV and impact resistant plastic housing
Bulb
12V / 55W or 24V / 70W H3 bulb included
Mounting
Recess Mount
Cable Entry
Pre-wired with 300mm of cable
Degree of Protection
IP 6K 9K
Maximum Output
12V / 55W or 24V / 70W
Note - Not suitable for 100W bulbs Me
6361 Series Flush Mount Halogen Deck Floodlight
48
Voltage Housing Colour
Part Number
Spare Part
12V
White Housing
1GA 996 361-141
9.1540.01 ‘FF’ insert
24V
White Housing
1GA 996 361-401
11
24
Replacement Bulb Type -
- Sealed cable entry via threaded gland with nut
74
tre
s
24
Deck Floodlights 6134 Series Halogen
6134 Series
103
110
White fibre reinforced housing and Free Form reflector for close range homogeneous illumination. Extended front edge to protect the lens.
120
145
Features: - Glass lens bonded with reflector to be dust and moisture resistant
Replacement Bulb Type -
- Extended front edge for lens protection - Stainless steel bracket, bolts and screws
PK22s 12V / 55W (YC1255) 24V / 70W (YC2470)
- Sealed cable entry via 2 pin plug - Suitable for applications subject to heavy vibration - Upright or pendant mounting. Can be rotated through 130° - 316 Stainless steel mounting hardware
Housing Description
UV and impact resistant plastic housing
Bulb
12V / 55W or 24V / 70W H3 bulb included
Mounting
Pendant or Upright mounting,
Outer plug connection 2 pin (AMP 1809230)
Degree of Protection
IP 5K 6K
Maximum Output
12V / 55W or 24V / 70W
Note - Not suitable for 100W bulbs
Me
Halogen Deck Floodlight
Bracket
Voltage Housing Colour
Part Number
12V
White Housing
2835
24V
White Housing
2835-24V
Stainless steel bracket for stabilized mounting in areas subject to vibration. 9.1517.08
tre
s
Spare Part 9.1539.01 ‘FF’ insert 9.6008.05 Rubber boot for AMP connection 9.6008.06 Wiring loom for AMP connection, 2.0m
6134 Series - Flush Mount
110
White fibre reinforced housing and Free Form reflector for close range homogeneous illumination.
41
42
120
Features: - Glass lens bonded with reflector to be dust and moisture resistant - Extended front edge for lens protection
Replacement Bulb Type -
- Sealed cable entry via 2 pin plug
PK22s 12V / 55W (YC1255) 24V / 70W (YC2470)
- Suitable for applications subject to heavy vibration
Housing Description
UV and impact resistant plastic housing
Bulb
12V / 55W or 24V / 70W H3 bulb included
Mounting
Recess Mount. Pre-wired with 250mm of cable
Outer plug connection 2 pin (AMP 1809230)
Degree of Protection
IP 5K 6K
Maximum Output
12V / 55W or 24V / 70W
Note - Not suitable for 100W bulbs Me
tre
s
Recessed Halogen Deck Floodlight Voltage Housing Colour
Part Number
Spare Part
12V
White Housing
1GM 996 134-501
9.1539.01 ‘FF’ insert
24V
White Housing
1GM 996 134-511 49
Deck Floodlights 8505 Series Masthead / Floodlight Combination Lamps
8505 Series Deck Floodlight and Masthead Lamp combined in one robust housing. Suitable for vessels less than 12m in length.
IMO COL REG 72
Features:
BSH NMSC
IMO
USCG
MARITIME
RINA
A-16
AUSTRALIA
NZ
- 2 Nautical Mile Masthead lamp
COL REG 72
- Hella marine 'Free Form' reflector technology - Flexible mounting arms for mounting on a variety of mast profiles - Halogen reflector lamp (12V / 20W) with cover for moisture protection - All metal parts are stainless steel - Bulb replaces via opening in the cover - Black or White fiber reinforced housing
Housing Description UV and impact resistant plastic housing Bulbs
12V / 10W SV8.5 and 12V / 20W GX5.3 bulbs included
Mounting
Navigation lamp requires wiring through grommet on back plate
.
Floodlight pre-wired with 110mm of cable
.
Housing arms flex to fit around mast profile
Degree of Protection
IP X4
Maximum Output
Deck lamp 12V / 20W
Approvals
IMO COLREG, USCG, ABYC A-16, RINA(I)
.
NMSC, Maritime NZ Replacement Bulb Type -
72
Floodlight GX5.3 12V / 20W (8GH 998 529-001) 28V / 20W (8GH 998 529-011)
187 154
Masthead SV8.5 12V / 10W (K1210) 24V / 10W (K2410)
132
8505 Series Masthead / Floodlight Lamps Voltage
Housing Colour
Part Number
12V
Black Housing
2LT 998 505-001
12V
White Housing
2LT 998 505-011
Me
8505 Series Spare Parts
50
Insert
Bulb
12V / 20W (8GH 998 529-001)
12V / 10W (K1210)
28V / 20W (8GH 998 529-011)
24V / 10W (K2410)
tre
s
ABYC
Deck Floodlights 8504 Series Masthead / Floodlight Lamps
8504 Series Deck Floodlight and Masthead Lamp combined in one robust housing. Suitable for vessels less than 20m in length.
IMO COL REG 72
Features:
BSH NMSC
IMO
USCG
MARITIME
RINA
A-16
AUSTRALIA
COL REG 72
NZ
- 3 Nautical Mile Masthead lamp
ABYC
- Hella 'Free Form' reflector technology - Flexible mounting arms for mounting on a variety of mast profiles - Illuminates large areas of deck or superstructure - Glass lens bonded with reflector to be dust and moisture resistant - Covered bulbs for moisture protection - All metal parts are stainless steel - Black or White fibre reinforced housing Housing Description
UV and impact resistant plastic housing
Bulbs
12V / 10W BAY15d and 12V / 55W H3 bulbs included
Mounting
Navigation lamp and Deck Floodlight require separate wiring
.
Housing arms flex to fit around mast profile
Degree of Protection
IP X4
Maximum Output
Deck lamp 12V / 55W or 24V / 70W
.
Note - Not suitable for 100W bulbs
Approvals
IMO COLREG, BSH, USCG, ABYC A-16, RINA(I)
.
NMSC, Maritime NZ Replacement Bulb Type 111
Floodlight PK22s 12V / 55W (YC1255) 24V / 70W (YC2470) Masthead BAY15d 12V / 25W (EA1225) 24V / 25W (EA2425)
247 202
205
8504 Series Masthead / Floodlight Lamps Voltage
Housing Colour
Part Number
12V
Black Housing
2LT 998 504-001
12V
White Housing
2LT 998 504-011
Me
tre
s
8504 Series Spare Parts ‘FF’ Floodlight Insert
Bulb
9.1533.01
12V / 55W (YC1255)
Lamp housing white 9EL 127 083-071
24V / 70W (YC2470) Bulb 12V / 25W (EA1225) 24V / 25W (EA2425)
51
Deck Floodlights 8503 and 8506 Series Halogen 8503 Series
111
Floodlight for mounting on masts. Black or White fibre reinforced housing and Free Form reflector for close range homogeneous illumination.
116 71
205
- Hella 'Free Form' reflector technology - Flexible mounting arms for mounting on a variety of mast profiles - Illuminates large areas of deck or superstructure
Replacement Bulb Type -
- Glass lens bonded with reflector to be dust and moisture resistant
PK22s 12V / 55W (YC1255) 24V / 70W (YC2470)
- All metal parts are stainless steel - Compact design
Housing Description
UV and impact resistant plastic housing
Bulb
12V / 55W H3 bulb included
Mounting
Housing arms flex to fit around mast profile
Degree of Protection
IP X4
Maximum Output
12V / 55W or 24V / 70W
8503 Series Deck Floodlights
Me
Voltage
Housing Colour
Part Number
12V
Black Housing
1GA 998 503-001
12V
White Housing
1GA 998 503-011
tre
s
â&#x20AC;&#x2DC;FFâ&#x20AC;&#x2122; Floodlight Insert 9.1533.01
8506 Series Compact and powerful halogen floodlight for mounting underneath spreaders.
63
74
Features:
68
- Hella 'Free Form' reflector technology - Cable entrance through rubber grommet - Halogen reflector lamp (12V / 20W) protective cover
Housing Description
UV and impact resistant plastic housing
Bulb
12V / 20W GX5.3 included
Mounting
Pre-wired with 110mm of cable
Degree of Protection
IP X4
Maximum Output
12V / 20W
GX5.3 12V / 20W (8GH 998 529-001) 28V / 20W (8GH 998 529-011)
Me
8506 Series Deck Floodlights
52
Replacement Bulb Type -
Voltage
Housing Colour
Part Number
12V
White Housing
1GA 998 506-001
tre
s
Search Lights 8502 Series Halogen Lights
8502 Series - Powerful Twin Beam Hand Held Search Light Hella marine hand held search lights are vital tools for night sailing and landing manoeuvres.
166
154
- Two reflectors and two halogen bulbs on separate switches - 55W bulb for close range. 100W bulb for long range (12V Version) - 2 x 70W bulbs (24V Version) - Trigger switch integrated into the grip allows morse code operation - Extended front edge for protection of the glass lens
Illumination Distance 55 W
Housing Description Shock and vibration resistant plastic
100W
both
70W
2 x 70W
700m
High gloss aluminium reflector
600m
Bulbs 1 x 12V / 55W H3 bulb included
Deck mount base
800m
500m
1 x 12V / 100W H3 bulb included
2 x 24V / 70W H3
300m
Installation
Spiral cable with cigarette lighter plug
200m
Extended length 3.5m
100m
Degree of Protection
IP X6K
400m
12V
24V
9.2862.08
Replacement Bulb Type -
8502 Series Hand Held Search Light Voltage
Housing Colour
Part Number
12V
Black Housing
2862
PK22s 12V / 55W (YC1255) 24V / 100W (YC24100) 24V / 70W (YC2470)
8502 Series - Powerful Twin Beam Fixed Mount Search Light 154
Designed for installations through cabin roofs. 488
- Two reflectors and two halogen bulbs on separate switche - Two 12V / 55W or 24V / 70W bulbs - 360째 rotation. 30째 vertical adjustment - Extended front edge for protection of the glass lens Housing Description Shock and vibration resistant plastic
Illumination Distance
High gloss aluminium reflector
2 x 55W
Bulbs 2 x 12V / 55W H3 bulbs included
800m
2 x 24V / 70W H3
700m
Installation
Pre-wired with 350mm of cable
Grommet sealed. O-ring included
Degree of Protection
IP X6K
600m 500m 400m 300m 200m 100m
8502 Series Fixed Mount Search Light Voltage
Housing Colour
Part Number
12V
Black Housing
2863
Spare Parts - Hand Held Search Lights 1
2
Spare Parts - Fixed Mount Search Lights Insert
3
Insert 9.2862.01
Plug, Cable & Grip 2
Switch 9.2863.06
Plug Assembly 9.2862.03
9.2862.08
1
1
9.2862.02
3
Deck mount base
PK22s 12V / 55W (YC1255) 24V / 70W (YC2470)
9.2862.01
2
1
12V
Replacement Bulb Type -
2
53
Search Lights Halogen Spot Lights
Halogen Hand Held Search Lamp 81
Push lock switch for easy one handed operation. 1.3 metre cable when extended
168 138 298
Replacement Bulb Type -
Bulbs 1 x 12V / 55W H3 bulb included
PK22s 12V / 55W (YC1255) 24V / 70W (YC2470)
1 x 24V / 70W H3
Halogen Deck and Hand Held Search Lamp
Spare Parts -
Voltage
Housing Colour
Part Number
12V
Black Housing
2864
9.2865.01 Insert 9.2865.07 Rubber Rim
88
Halogen Search Lamp with Remote Control 360째 horizontal rotation, 60째 vertical tilt. 168
Bulbs 1 x 12V / 55W H3 bulb included
1 x 24V / 70W H3
474
Halogen Search Lamp with Remote Control
Replacement Bulb Type -
Voltage
Housing Colour
Part Number
12V
Black Housing
2866
PK22s 12V / 55W (YC1255) 24V / 70W (YC2470) Spare Parts 9.2865.01 Insert 9.2865.07 Rubber Rim
Lightweight Hand Held Spot Lights Features:
134
72
- Powerful 100W 12V or 50W 24V sealed beam - ON / OFF Switch or momentary ON / OFF Switch - Plug and cable
225
Housing Description Shock and vibration resistant plastic High gloss aluminium reflector Bulbs Sealed beam included Installation
Spiral cable with cigarette lighter plug
Extended length 2.5m
Blue Search Lights with ON / OFF Switch Voltage
Wattage
Housing Colour
Part Number
12V
100
Blue Housing
1520
24V
50
Blue Housing
1525
Black Search Lights with Momentary ON / OFF Switch
54
Voltage
Wattage
Housing Colour
Part Number
12V
100
Black Housing
1524
Spare Parts 9.1520.07 Spiral Cable and Plug
Spare Parts 9.1520.07 Spiral Cable and Plug 9.1524.06 Switch ON / OFF
LED Interior and Exterior Lighting
Introduction LED Interior and Exterior Lighting
LED Technology Hella marine LED interior, exterior and courtesy lamps provide efficient, power saving and ultra durable illumination for reliability and safety at sea. Benefits of LED lighting technology: Ultra Low Power Consumption Combining efficient LED light sources with advanced optic technology, Hella marine LED products deliver more light output per watt than traditional bulb lamps and thus provide considerable energy savings. As an example, Hella marine DuraLed速 heavy duty 36 LED lamps use less than 15% of the power required to run a 60W fluorescent lamp, yet provide a considerably wider, whiter and more intense light pattern. Ultra low heat signature for improved safety All Hella marine LED lamps feature an ultra low heat signature due to their low power consumption. This provides many safety and installation advantages as the risks of heat damage to materials or people caused by traditional halogen lamps are completely eliminated. Hella marine LED lamps can be installed almost anywhere onboard, directly onto timber, fabrics and lightweight composite materials. No bulbs, No maintenance. Ultra long service life Hella marine LED technology has no filaments to break, thus making the LED lamps extremely shock and vibration resistant for reliable illumination and safety. Our engineering team has developed a unique range of highly demanding tests to lift product reliability to new standards. Fully sealed for life Each Hella marine LED lamp is a completely sealed opto-electronic device. Proven design, precision engineering, and the use of high impact acrylic materials ensures superior resistance to water, impact, UV and general wear and tear.
Pre-wired with marine cable Hella marine LED lamps are pre-wired with quality marine specification tinned cable. The cable is completely sealed to the lamp body providing time saving at installation and reliable electrical connection.
MultivoltTM technology for durability and safety Advanced MultivoltTM circuitry provides a uniform level of intensity for reliable and safe illumination across a range of DC inputs such as 8-28 volts or 9-33 volts. MultivoltTM LED lamps can be connected to 12 or 24 volt systems without modification, providing full light performance and automatic compensation for low battery voltages, and voltage drop over long cables and connections. Hella marine MultivoltTM LED lamps are also reverse polarity and spike protected for enhanced durability even under severe voltage fluctuations.
Electromagnetic Compatibility (EMC) All Hella marine LED products are electronic devices. Their electrical circuits contain components that suppress possible interference, both emission as well as susceptibility to emissions, to the limits prescribed in international standards.
56
Maritimo M73 www.maritimo.com.au
Welcome to the future of ultra efficient illumination Hella marine LED lighting products are sophisticated opto-electronic devices designed for durable, energy efficient, maintenance free operation. Recent quantum leaps in the luminous intensity of LEDs per watt have allowed marine lighting systems to develop significantly to effectively illuminate a vesselâ&#x20AC;&#x2122;s interior.
Quality LED lighting provides many significant advantages over traditional filament based sources. Significantly reduced power consumption, increased reliability, reduction in radiated heat and attractive ambient effects are all benefits of modern LED lighting systems. The following are key considerations when selecting LED lighting for marine interior and exterior applications.
Power saving on board The single most influential driver for LED technology on most yachts and powerboats is the considerable power saving on offer compared to incandescent lamps. Lighting systems are a major part of a vesselâ&#x20AC;&#x2122;s electrical architecture where consumption can be dramatically reduced. The opportunity to save hundreds of amp hours is available now. As a recent example, the entire Hella marine LED lighting system specified for a Maritimo 73ft motor yacht draws less than 7 Amps. To illuminate the same interior layout with halogen
lamps would have totalled over 62 Amps. The reduction in cable size and weight together with the safety aspects of an almost zero heat signature was also highly beneficial. The majority of the lamps specified for the Maritimo 73 system are the compact 9599 series LED downlights. Each lamp consumes less than 0.8W yet produces the equivalent light output of a 10W halogen lamp. Such efficiency is class leading.
LED vs Halogen current draw comparison on Maritimo M73 Halogen 62 Amps @ 24V
Hella marine reliability Due to their solid state nature, LEDs do not have filaments to break, however LEDs do require precise current regulation and voltage protection to provide long term reliability. For LED lighting manufacturers, many design and engineering milestones are required to produce durable products that provide ongoing performance in marine applications. Hella marine LED products feature several key advantages such as completely sealed housings, sealed cable entries, effective electronic protection, shock, vibration
Hella marine LED 7 Amps @ 24V
74 x Halogen lamps each consuming 20W
210 x LED lamps each consuming <0.8W
57
and impact resistant components that all contribute towards outstanding reliability. Compared to incandescent lighting, where a filament inside a bulb may break at any moment, Hella marine LED lighting is ‘fit and forget’. Many LED lamp manufacturers claim operating lifetimes of 50,000 or 100,000 hours, however in many cases these claims are generalized. The high power LED devices are often too new to have been thoroughly tested for such periods. These lifetime estimates are often based on LED component specifications from the device manufacturer rather than the life of the complete lamp in a marine installation.
Colour temperature examples
1800K
4000K
5500K
8000K
12000K
1850 K
Candle
2800 K
Halogen G4 Bulb (Incandescent lamp)
3000 K
Hella marine Warm White LED Downlight
5000 K
Hella marine White LED Downlight
5200 K
Hella marine White EuroLED® lamp
6500 K
Hella marine LED Mega Beam Floodlight
6500 K
Daylight
16000K
In the harsh marine environment, salt air corrosion to circuit boards, light degradation due to excessive heat, vibration fatigue, shock loads, voltage fluctuations and low battery voltages all contribute to reduce the operating life of LED lamps without thorough engineering and electronic protection. The supplier’s warranty policy, integrity and track record is often a more accurate benchmark on the lifetime and quality of the LED lamp under consideration.
Colour Temperature and Rendering Until recently, the lack of high quality white LED devices with sufficient intensity has been the major factor preventing the acceptance of LEDs for general marine lighting purposes. LEDs had a reputation for appearing ‘cold’ and ‘blue’ due to there phosphorous coating heritage. However today’s high efficacy devices can rival traditional incandescent light sources for colour and ambience. When selecting LED interior lighting, colour temperature is an important consideration. Colour temperature is measured in Kelvin and describes the effect of heating an object until it glows incandescently. The emitted radiation, and apparent colour changes in proportion to the temperature; envisioned when considering hot metal in a forge that glows red, then orange, and then white as the temperature increases.
White light
Hella marine describes higher colour temperatures (>5200K or more) as ‘cool’ white, and lower colour temperatures (<3500 K range) as ‘warm white’. ‘Neutral white’ is in 4200K range. Cool white is recommended for visual tasks, work areas such as engine rooms, and exterior lighting. Warm white light is suggested for interior spaces as it adds life and vibrancy to people and objects, is considered more flattering to skin tones or fabrics, and makes food look fresh and attractive. These colour choices should only be an approximate consideration however. Cool white will accentuate blue and green hues in certain fabrics and surfaces, and where there are stainless steel or gel coat surfaces. 58
Warm white light Formula Icon 54 www.formulacruisers.co.nz
Lighting designers may specify cool white for galley areas and warm white where there is an abundance of varnished timber work instead of high gloss gel coat surfaces.
Light Output
Enhancing interiors with attractive colour matched illumination. Hella marine offers highly efficient LED lamps with colour temperatures in the warm white range of 3000K, or white range of 5000K. Specialist LED selection and quality control ensures the colour temperature and colour rendering performance is matched across similar series. The result is a uniform colour temperature and ambience throughout a vessel when different lamps are installed.
For an effective comparison of the different products from marine LED manufacturers, many factors must be considered. The best lamp for a given application is no longer the one that solely meets a style requirement. Today, power consumption, efficiency, output and beam angle must be considered together with light colour, shape, and the aesthetics and finish of the housing itself. The following performance data is worth considering -
Luminous Flux Measured in Lumens (lm), luminous flux describes the total quantity of light produced from a lamp. The higher the lumen count, the more intense the light output.
Luminous intensity
Warm White
Measured in Candela (cd), luminous intensity is the luminous flux at a particular angle from the light source. Peak candela occurs at 0 degrees, i.e. directly below a lamp.
White
Rakino 0956 series
Rakino 0959 series
Tiri 0956 series
Tiri 0957 series
Ponui 0770 series
Ponui 0771 series
Illuminance Measured in Lux (lx), Illuminance is equal to luminous flux divided by the illuminated area. One lux is equal to one lumen per square meter.
Luminous Flux (Lumens) / Area = Illuminance (Lux). or Illuminance (Lux) x Area = Luminous Flux (Lumens) If both the area to be illuminated and the desired level of illumination are known, the total number of lumens required can be calculated. Divide the total lumens by the output of the LED lamp under consideration to determine the number of fixtures required to deliver the desired light output.
Waiheke 0681 series
Eg, A powerboat salon of 10 square meters and the desired illumination level is 120 Lux, a total of 1200 lumens are required. If the LED lamp under consideration has a luminous flux of 80 lumens, 15 lamps will be required (1200 / 80 = 15).
Waiheke 0681 series
Waiheke 9076 series
Waiheke 9076 series
Oblong 9680 series
Easy Fit 8560 series
Oblong 9680 series
For further comparisons it is also important to consider the beam angle of an LED lamp, and the lux levels available at varying distances from the device. Narrow light beams may provide effective intensity directly under the fitting, but may not evenly illuminate an interior as the light may be too narrow with many shadows between effectively lit areas.
Easy Fit 8560 series 59
Hella marine Light Performance Diagrams No formula exists for lighting designers to directly correlate the luminous flux of the LED component used or the power consumption of the LED device to the performance of the entire LED luminaire. While the lumen output of the LED does describe how much luminous flux is generated, it does not indicate how effectively that light is distributed. The Hella marine light performance diagrams show output and spread in two formats. The Candela curves show peak candela across a range of angles and illustrate the light pattern and peak intensity according to the scale used. (A uniform scale for all diagrams is used to aid product comparisons) The Lux charts show the spread of light, calculated first from the candela curve by determining the angle where half of the peak candela output occurs.
Recommended Lux Values
In Fig 1 below, peak candela is 375cd (measured at 0 degrees). Half of this output (187.5cd) occurs at +/- 7.5 degrees, thus the lamp has a spread of 15 degrees. While there will be light beyond these angles, the majority of light will be occur inside the range shown. The lux data shows how much light is cast upon a surface at a given distance. The diagrams indicate peak lux (at 0 degrees), lux at the specified angle and the approximate length of surface area that will be illuminated inside the range shown.
Fig 1.
500
Area
Lux
Engine room
200-250
Galley surfaces
150-250
Heads
150-200
Salon
100-150
Companionway
70-100
Cabins
70-100
Flybridge
70-100
Cockpit
70-100
Hella marine 9599 series LED Downlight (Spot) Candela and Lux performance
LED Downlight Spot White Light Candela Output
Luminous Intensity - Distance / Lux
450
15°
400
350
300
185
1m
250
370 Lux 270 mm
185
200
150
Intensity (cd)
100
50
−40°
−30°
−20°
−10°
0°
Angle
60
10°
20°
30°
−40°
2m
46
92.5 Lux 540 mm
46
500
450
Efficacy
Hella marine 9599 series LED downlight (Spread) Compared to 8508 series halogen downlight.
400 500 500
350
LED Downlight
450
Power consumption
450
300
0.8 Watts
400
400
250 350
300
300 150
250
250
200
200
Halogen Downlight Power consumption
150
50 150
10 watts 100
Intensity (cd)
Intensity (cd)
Intensity (cd)
100
50
−30°
−20°
−10°
−40°
0°
10°
20°
30°
−40°
Angle
50
−30°
−20°
−10°
0°
10°
20°
30°
−30°
−20°
−10°
0°
10°
20°
30°
It may also be an interesting comparison to divide the luminous flux of a lamp by its cost to derive lumens per dollar. The more lumens per dollar (flux per bucks), the more light for your investment. Also, it is important to determine that the efficacy of the LED lamp is measured as the devices total efficacy, not the efficacy of only the LED(s) employed. Power consumed to run an electronic power supply driving and controlling the LED(s) is always a contributor to the lamps total consumption.
Heat reduction and thermal management
−40°
Angle
−40°
E.g. A single Hella marine 9599 series white LED downlight consumes less than 0.8W and produces around 80 lumens. 80 / 0.8 = 100 lumens per watt.
350
200
−40° 100
Like efficiency, the efficacy of an LED lamp is the amount of light it produces per unit of electrical power it consumes (lumens per watt). The higher the lumens per watt, the higher the efficiency.
−40°
Angle
Maritimo M73 www.maritimo.com.au
With the power saving benefits of efficient LED based devices also comes heat reduction benefits. The sometimes dangerously high temperatures of 10W and 20W halogen lamps onboard can be eliminated with high efficiency LED technology. This allows boat builders and designers a wide scope of installation possibilities where the air cavity behind incandescent lamps, traditionally reserved for cooling, is no longer required. Efficient LED lamps can be mounted into solid surfaces and composite structures without risk of fire or heat damage to surrounding materials. Well engineered thermal management of an LED device is essential for long-term durability. A common misconception is that LED’s do not generate heat. LEDs consume power and some of this power is also converted into heat, even in the most energy efficient LEDs. In contrast to incandescent lamps however LED’s like to ‘run cold’. As a rule of thumb, the hotter an LED runs the faster it will degrade. A lower, and in extreme cases much lower light performance will result. High performance LED’s do generate heat, which needs to be coupled to surfaces designed to efficiently transport the heat away from the LED itself. LEDs that overheat, meaning the junction temperature of the LED rises above a set threshold, will permanently degrade and significantly reduce their luminous efficacy. A noticeably ‘hot to touch’ exterior surface of a high output LED interior lamp provides some indication that the light output of the device will deteriorate within a few hundred hours. Hella marine LED lamps will operate ‘cool’ or ‘slightly warm’ to the touch after many hours of operation. 61
Riviera 43FB www.riviera.com.au
EuroLED 速 series Lens and Optic engineering Precision engineered lens and optic combinations on powerful single LED lamps such as the 0630 and 0631 series EuroLED速 lamps are essential for efficient performance. The optics work to efficiently capture and distribute light from a highly intense single point source and provide a wide and uniform light pattern without glare or eye discomfort.
Hella marine thermal management expertise, coupled with proven optics and electronic design, ensures the long term durability with minimal degradation over many years of service.
Lens and Optic Technology To maximise the ever increasing efficacy of advanced LEDs, efficient optic design is essential to capture and spread the available light and to evenly illuminate areas on board. Unlike incandescent light sources, LED devices begin with a directional light pattern. The goal for optics designers, working an application such as interior down lighting, is to create optics and lens patterns that produce an effective spread of homogeneous illumination throughout the interior. This even spread of light is often more important than how intense a lamp looks when viewed straight on. All Hella marine LED lamps use efficient optics, lens designs or Free-Form reflector technology to accurately capture and distribute large percentages of available light from the LED source or sources. Examples include: - Oblong LED step lamps with a 30 degree down angle light beam to illuminate the tread of steps and stairs without dazzle from the lamps themselves. - Round and Square LED courtesy lamps providing attractive uniform light patterns via an efficient optic and lens with embedded glass spheres for minimum light losses.
62
Tiara 4200 www.tiarayachts.com
- EuroLED® lamps employ an finely machined optic and lens combination to provide an even spread of bright white light with minimum light losses. - 9599 series LED downlights with powerful ‘Spot’ or ‘Spread’ light distribution patterns without glare.
Lens, Optic Technology and Eye Safety To take advantage of the ever increasing efficacy of the most advanced LEDs, efficient optic design is essential to capture and spread the available luminous flux emitted by the LED and to evenly illuminate areas. With significant advances of LED brightness, eye safety considerations are increasingly important. It is essential for high power LEDs to be coupled with optic designs that protect the eye’s retina from possible damage when viewed directly. It is desirable for the entire lens area of a lamp to be evenly illuminated via an efficient optic rather than using a multiple of LEDs without any optic. Easily visible LEDs inside a luminaire without any optic or lens protection can cause a degree or even significant eye discomfort if viewed directly.
Riviera 43FB www.riviera.com.au
Costs Quality LED interior and exterior lamps have shifted lighting systems from an incandescent globe based inside a housing or reflector to complex engineered optoelectronics devices. These devices now incorporate advanced drive circuits, spike and over voltage protection, optics, lenses, plus the LED source itself. As a result, the added features and benefits of effective LED lighting do carry higher costs compared to incandescent lamps. However, for many applications the substantial power savings, long term reliability and improved safety advantages are a convincing value proposition for astute owners and operators.
Night Vision - Why red light does not affect our night vision. The human eye contains two types of receptors, the rods and the cones. Rods and cones have an increased sensitivity to frequency bands at different ends of the visual spectrum. Rods are largely responsible for our day time and colour vision and have an increased sensitivity towards the red band of the visual spectrum. Cones are responsible for our night vision capability and have an increased sensitivity towards the blue, shorter wavelength band of the visual spectrum. For this reason red light will not affect the sensitivity of the cones and with that our night vision is not affected by the use of red light in the cabin. New Zealand Coastguard Rayglass Protector 850 www.rayglass.co.nz
63
0681 and 9076 Series Multi-purpose Lamps
Waiheke Elegant LED lamps offering class leading efficiency and durability Hella marine Waiheke series LED lamps are completely sealed energy saving devices suitable for a wide variety of lighting applications, from interior downlighting to cockpit illumination.
The light colour matches an equivalent Hella marine Rakino series LED downlight for consistent illumination and coordinated ambience throughout a vessel. 500mm of marine tinned ‘twin core’ cable is pre-wired and sealed into each lamp for absolute water tightness and reliable electrical connections. Hella marine Waiheke series lamps represent the latest in class leading energy efficiency and maintenance free ‘fit and forget’ technology.
Power consumption is very low at less than 2.0W (<0.17A@12V / <0.08A@24V) offering substantial energy saving compared to incandescent lighting. The surface temperature is very cool due to their low current draw. Three different housing designs are available, ideal for direct or indirect illumination duties. The attractive polished 316 marine grade stainless steel rim version offers many innovative design possibilities while the wide rim and ultra narrow lamps can be integrated into different shapes and spaces on board. All Waiheke series lamps provide comfortable colour temperatures in white and warm white with excellent colour rendering performance.
X-50 www.x-yachts.com
The stainless steel bezel features a unique internal tab lock for secure attachment without visible fastenings.
Waiheke Candela and Lux performance. White light. Strip Lamp Candela Output
500
Luminous Intensity - Distance / Lux
450
26°
400
350
300
225
1m
250
450 Lux 460 mm
225
200
150
Intensity (cd)
100
50
−40°
−30°
−20°
−10°
0°
Angle
64
10°
20°
30°
−40°
2m
56
112.5 Lux 920 mm
56
Universal LED lamps offering class leading efficiency and durability Lens Material
UV resistant enhanced impact acrylic
Colour Temperature
5000K (White) 3000K (Warm White)
Dimming
Hella marine Dimmer 5XA 998 572-001
Cable
Pre-wired with 500mm of twin core cable
Operating Voltage
12V DC or 24V DC
Power Consumption
< 2.0W ( < 0.17A @ 12V / < 0.08A @ 24V )
Degree of Protection
IP 67 - Completely Sealed
Mounting
Stainless steel screws included
Weight
Stainless Rim versions - 165g (including cable) Wide Rim versions - 100g (including cable)
Packaging for aftermarket presentation
No Rim versions - 85g (including cable)
a
0681 series 316 Stainless Steel Rim lamps
b
f
White LED Lamps
a
Dimensions: a = 250mm b = 50.0mm c = 218mm d = 28.0mm e = 20.0mm f = 6.0mm
/ / / / / /
9.84” 1.97” 8.58” 1.10” 0.79” 0.24”
d c
e
Dimensions: a = 250mm b f = 50.0mm c = 218mm d = 28.0mm e = 20.0mm f = 6.0mm
e e
/ / / / / /
9.84” 1.97” 8.58” 1.10” 0.79” 0.24”
c
d
f
d
/ / / / / /
a
10.43” 1.33” 8.58” 0.79” 1.00” 1.14”
a 10.12” 0.79” 8.58” 1.02” 0.79”
Rim Type / Finish
Part Number
12V DC
Wide / Stainless Rim
2JA 980 681-101
24V DC
Wide / Stainless Rim
2JA 980 681-601
d
d c
Voltage
Rim Type
Part Number
12V DC
Wide (Gasket included)
2JA 959 076-511
24V DC
Wide (Gasket included)
2JA 959 076-611
Voltage
Rim Type
12V DC 24V DC d
Wide (Gasket included)
2JA 959 076-561
Wide (Gasket included)
2JA 959 076-551
Part Number f
f
Multi purpose White LED Strip Lamps
e
d
c
Voltage
Rim Type
Part Number
12V DC
No Rim (No gasket)
2JA 980 681-051
24V DC
No Rim (No gasket)
2JA 980 681-551
b
Dimensions: a = 257mm b = 20.0mm c = 218mm d = 26.0mm e = 20.0mm
Multi purpose Warm White LED Strip Lamps / / / / /
b
b
c b
b
0681 series No Rim lamps
d
d / / / / /
d
Voltage
c
e
b
Dimensions: a = 257mm b = 20.0mm c = 218mm d = 26.0mm e = 20.0mm
a
Multi purpose Warm White LED Strip Lampsa Dimensions: a = 265mm b = 33.0mm c = 218mm d = 20.0mm e = 25.5mm f = 29.0mm
d
2JA 980 681-501
b
c
e
Wide / Stainless Rim
Multi purpose White LED Strip Lamps
b
a 10.43” 1.33” 8.58” 0.79” 1.00” 1.14”
2JA 980 681-001
24V DC
f e
/ / / / / /
Part Number
b Wide / Stainless Rim
9076 series Wide Rim lamps
d
Dimensions: a = 265mm b = 33.0mm c = 218mm d = 20.0mm e = 25.5mm f = 29.0mm
Rim Type / Finish
12V DC
Warm White LED Strip Lamps
e
a
Voltage
10.12” 0.79” 8.58” 1.02” 0.79”
Voltage
12V DC e 24V DC
b
c
d
a
Rim Type
Part Number
No Rim (No gasket)
2JA 980 681-151
No Rim (No gasket)
2JA 980 681-651
d
b
e
d
65
9599, 9596, 0956 and 0957 Series Downlights
Rakino
Tiri Compact LED downlights offering class leading efficiency and durability
Designed and manufactured in New Zealand and consuming less than 0.8W per lamp (<0.07A@12V / <0.03A@24V), Hella marine Rakino and Tiri series LED downlights feature industry leading efficiency.
Each lamp is completely sealed and can be installed almost anywhere on board, interior or exterior, wet or dry. The ultra low heat signature will not cause damage to surrounding materials. Available in 12V or 24V DC versions, these LED lamps can be dimmed and controlled with the Hella The lamps also run very cool due to their low marine 2 Group Light Dimmer for ambient lighting current draw to provide substantial power saving effects. LED LED Downlight Downlight Spot Spot White White Light Light Candela Candela Output Output Luminous Luminous Intensity - Distance - Distance / Lux / Lux benefits compared to incandescent500lighting. Hella marine LED downlights represent the Intensity class 500 Both series offer a viable alternative to 10W leading energy efficiency and maintenance free ‘fit 450450 incandescent lamps. and forget’ technology. Advanced Hella marine lens and optic designs 15°15° 400400 provide intense light without glare or eye strain. 350350 Two beam angle options are available, a 15° Spot or 32° Spread beam. 300300 The Spot lamp (Peak light angle at 15°) is ideal 185 185 185 370 370 LuxLux 185 250250 requiring 1m1m for installations where the first surface 270270 mmmm illumination is 1 meter or more from the lamp. 200200 Spread lamps (Peak light angle at 32°) are 150150 ideal for softer light where the first surface to be illuminated is less than 1 meter from the lamp. - Completely sealed housing 100100 - Pre-wired with marine cable Intensity (cd) Intensity (cd)
Formula Icon 54 www.formulacruisers.co.nz
50 50
−40° −40°
LED Downlight Spot White Light Candela Output
/ Lux LuminousLuminous Intensity -Intensity Distance- /Distance Lux
500500
0° 0°
10°10°
20°20°
30°30°
−40° −40°
2m2m
46 46
92.5 92.5 LuxLux 540540 mmmm
46 46
Luminous Luminous Intensity Intensity - Distance - Distance / Lux / Lux
LED LED Downlight Downlight Spread Spread White White Light Light Candela Candela Output Output
450450
15°
400 400
15°
400400
350 350
350350
300 300
300300
185
1m 1m
250 250
185 370 Lux 270 mm
185 370 Lux 270 mm
185
200 200
200200
150 150
150150
100 100
100100
50 50
32°32°
1m1m
250250
Intensity (cd) Intensity (cd)
Intensity (cd)
−10° −10°
White light. Spread LED Downlight Candela and Lux performance.
450 450
−40° −40°
−20° −20°
Angle Angle
White light. Spot LED Downlight Candela and Lux performance. 500 500
−30° −30°
50 50
105105 LuxLux 630630 mmmm
50 50
50 50
−30° −30°
−20° −20°
−10° −10°
0°
10°
20°
30°
Angle
−40°
2m 2m
46
46 Lux 92.5 540 mm
92.5 Lux 46 540 mm
46
−40° −40°
66 LED Downlight Spread White Light Candela Output
Luminous Intensity - Distance / Lux
−30° −30°
−20° −20°
−10° −10°
0° 0°
Angle Angle
10°10°
20°20°
30°30°
−40° −40°
13 13 2m2m
28 28 LuxLux 1260 1260 mmmm
13 13
Compact LED downlights offering class leading efficiency and durability
Packaging for aftermarket presentation
Lens Material
UV resistant enhanced impact acrylic
Rim Material
UV resistant plastic. 316 stainless steel (Round lamps only)
Colour Temperature
5000K (White) / 3000K (Warm White)
Dimming
Dimmed via Hella marine Dimmer 5XA 998 572-001
Cable
Pre-wired with 120mm of single core marine cable
Operating Voltage
12V DC or 24V DC
Power Consumption
< 0.8W ( < 0.07A @ 12V / < 0.03A @ 24V )
Degree of Protection
IP 67 - Completely Sealed
Mounting
Stainless steel screws included
Weight
45g (including cable)
Rakino 9599 and 9596 series Round Downlights b
Spread Light Pattern
Spot Light Pattern
Dimensions
a = 75.0 mm / 2.95” with plastic rim White Light LED Downlight - Spread 72.0 mm / 2.83” with stainless steel rim b = 18.5 mm / 0.73” Rim Finish Voltage Part Number c = 50.0 mm / 1.97” 12V DC Polished stainless rim 2JA 959 599-051 d = 27.0 mm / 1.06”
c
a
d
b
Dimensions
d
Voltage
Rim Finish
Part Number
12V DC
Polished stainless rim
2JA 959 599-551
12V DC
White plastic rim
2JA 959 599-001
12V DC
White plastic rim
2JA 959 599-501
24V DC
Polished stainless rim
2JA 959 599-151
24V DC
Polished stainless rim
2JA 959 599-651
24V DC
White plastic rim
2JA 959 599-101
24V DC
White plastic rim
2JA 959 599-601
a = 75.0 mm / 2.95” with plastic rim 72.0 mm / 2.83” with stainless steel rim b = 18.5 mm / 0.73” Warm White Light LED Downlight - Spread c = 50.0 mm / 1.97” d = 27.0 mm / 1.06” Voltage Rim Finish Part Number
c
White Light LED Downlight - Spot
12V DC
Polished stainless rim
2JA 959 596-051
Warm White Light LED Downlight - Spot Voltage
Rim Finish
Part Number
12V DC
Polished stainless rim
2JA 959 596-551
12V DC
White plastic rim
2JA 959 596-001
12V DC
White plastic rim
2JA 959 596-501
24V DC
Polished stainless rim
2JA 959 596-151
24V DC
Polished stainless rim
2JA 959 596-651
24V DC
White plastic rim
2JA 959 596-101
24V DC
White plastic rim
2JA 959 596-601
Tiri 0596 and 0597 series Square Downlights Spread Light Pattern White Light LED Downlight - Spread
b
Dimensions Voltage a
c
a
b
Dimensions
c
d
a= b= c= d=
60.0 mm / 2.36” 16.0 mm / 0.63” 50.0 mm / 1.97” 22.0mm / 0.87”
d
Spot Light Pattern
Rim Finish
a =12V 60.0DC mm / 2.36” Chrome plated rim b = 16.0 mm / 0.63” 12V DC White plastic rim c = 50.0 mm / 1.97” d =24V 22.0mm DC / 0.87” Chrome plated rim
24V DC
White plastic rim
White Light LED Downlight - Spot
Part Number
Voltage
Rim Finish
Part Number
2JA 980 596-031
12V DC
Chrome plated rim
2JA 980 596-531
2JA 980 596-001
12V DC
White plastic rim
2JA 980 596-501
2JA 980 596-131
24V DC
Chrome plated rim
2JA 980 596-631
2JA 980 596-101
24V DC
White plastic rim
2JA 980 596-601
Warm White Light LED Downlight - Spread
Warm White Light LED Downlight - Spot
Voltage
Rim Finish
Part Number
Voltage
Rim Finish
Part Number
12V DC
Chrome plated rim
2JA 980 597-031
12V DC
Chrome plated rim
2JA 980 597-531
12V DC
White plastic rim
2JA 980 597-001
12V DC
White plastic rim
2JA 980 597-501
24V DC
Chrome plated rim
2JA 980 597-131
24V DC
Chrome plated rim
2JA 980 597-631
24V DC
White plastic rim
2JA 980 597-101
24V DC
White plastic rim
2JA 980 597-601
67
3980 Series Spot Lamps
Dual Colour SpotLED
Power saving, white light LED spot lamps featuring an innovative ring of ambient light
Hella marine LED spot lamps provide a crisp white spot light equivalent to a halogen downlight running a 12V 10W G4 halogen bulb
Completely sealed, shock and vibration resistant, Hella marine LED lamps provide outstanding reliability as there are no filaments to break. The surface is cool to the touch so will not cause damage to surrounding materials. Hella marine high output LED spot lamps are the answer for power saving and cool running interior or exterior lighting on powerboats and yachts.
Consumption is less than 2.5W (<0.18A@12V), offering more than 75% power saving. Unique ‘non glare’ reflector technology provides powerful light without discomfort to the eyes. Each lamp features an outer ring of red, white or blue LED light providing additional ambient illumination. The ambient function consumes less than 0.5W and is switched independently. MultivoltTM electronics provide consistent illumination and circuit protection across a range of inputs from 9-31V DC.
Riviera 43FB Sportfisher www.riviera.com.au
- Completely sealed housing - Pre-wired with triple core cable
SpotLED Candela and Lux performance. White light. SpotLED White Light Candela Output
500
Luminous Intensity - Distance / Lux
450
13°
400
350
300
225
1m
250
450 Lux 240 mm
225
200
150
Intensity (cd)
100
50
−40°
−30°
−20°
−10°
0°
Angle
68
10°
20°
30°
−40°
2m
56
112.5 Lux 480 mm
56
Compact white LED spot lamps featuring an innovative ring of ambient light Lens Material
UV resistant enhanced impact acrylic
Rim Material
UV resistant plastic. 316 stainless steel
Colour Temperature
6000K (White)
Cable
Pre-wired with 200mm of triple core cable
Operating Voltage
MultivoltTM 9-31V DC
Power Consumption
White Spot Light < 2.5W ( < 0.07A @ 12V / < 0.03A @ 24V ) Ambient Light Ring < 0.5W ( < 0.07A @ 12V / < 0.03A @ 24V )
Packaging for aftermarket presentation
Degree of Protection
IP 6K 9K
Mounting
Stainless steel screws included
Weight
75g (including cable)
Approvals
CE
b
b
a
d
CLEAR LENS
CLEAR LENS
CLEAR LENS
d
a
Dimensions a = 50.0 mm / 1.97” / 1.97” b = 34.0 mm / 1.34” / 1.34” c = 41.0 mm / 1.61” / 1.61” / 2.95” with plastic rim with plastic rim d = 75.0 mm / 2.95” / 2.83” with stainless steel rim 72.0 mm / 2.83” with stainless steel rim
Dimensions a = 50.0 mm b = 34.0 mm c = 41.0 mm d = 75.0 mm 72.0 mm
c
c
White Light Spot Lamps - Blue Ambient Ring Voltage
Rim Finish
Part Number
9-31V DC
Satin stainless steel rim
2JA 343 980-162
9-31V DC
Polished stainless steel rim
2JA 343 980-152
9-31V DC
Gold stainless steel rim
2JA 343 980-142
9-31V DC
White plastic rim
2JA 343 980-102
9-31V DC
Black plastic rim
2JA 343 980-112 Blue Ambient Ring
White Spot
Red Ambient Ring
White Spot
White Ambient Ring
White Spot
White Light Spot Lamps - Red Ambient Ring Voltage
Rim Finish
Part Number
9-31V DC
Satin stainless steel rim
2JA 343 980-062
9-31V DC
Polished stainless steel rim
2JA 343 980-052
9-31V DC
Gold stainless steel rim
2JA 343 980-042
9-31V DC
White plastic rim
2JA 343 980-002
9-31V DC
Black plastic rim
2JA 343 980-012
White Light Spot Lamps - White Ambient Ring Voltage
Rim Finish
Part Number
9-31V DC
Satin stainless steel rim
2JA 343 980-262
9-31V DC
Polished stainless steel rim
2JA 343 980-252
9-31V DC
Gold stainless steel rim
2JA 343 980-242
9-31V DC
White plastic rim
2JA 343 980-202
9-31V DC
Black plastic rim
2JA 343 980-212
69
0770 and 0771 Series Reading Lamps
Ponui Highly efficient, power saving brass reading lamps with LED technology Timeless quality brass housings and highly energy efficient Hella marine LED technology combine to offer a range of attractive and safe ‘cool to touch’ LED reading lamps. Power consumption is less than 0.8W per lamp (<0.07A@12V / <0.03A@24V) yet the highly efficient LED light engine offers intensity comparable to 10W incandescent lamps. LED LED Downlight Downlight Spot Spot White White Light Light Candela Candela Output Output Advanced500Hella marine lens and optic designs 500 provide a uniform distribution of light without glare 450450 or eye strain.
All Ponui series lamps provide comfortable colour temperatures in white and warm white with excellent colour rendering performance. The light colour exactly matches an equivalent Hella marine Rakino or Waiheke series LED lamp for consistent illumination and coordinated ambience throughout a vessel.
Luminous Luminous Intensity Intensity - Distance - Distance / Lux / Lux
15°15°
400400
Intensity (cd) Intensity (cd)
A further benefit of the ultra low power 350350 consumption is the ‘cool to touch’ lamp surface, effectively300reducing the risks associated with high 300 temperature incandescent reading lamps on board. 250250 options include bright chrome, satin Surface finish nickle chrome or gold plated brass. The brass arm 200200 and knuckle offers adjustable swing and pitch to 150150 achieve optimum light angles. Each light engine is a completely sealed unit, pre-wired with tinned 100100 marine cable.
185 185 185 370 370 LuxLux 185
1m1m
270270 mmmm - Bulkhead mount via plastic mounting cup - Lamp is pre-wired with marine cable
50 50
−40° −40°
−30° −30°
−20° −20°
−10° −10°
0° 0°
10°10°
20°20°
30°30°
−40° −40°
2m2m
46 46
Angle Angle
92.5 92.5 LuxLux 540540 mmmm
46 46
White light. LED Reading Lamp Candela and Lux performance. 500500
Luminous Luminous Intensity Intensity - Distance - Distance / Lux / Lux
LED LED Downlight Downlight Spread Spread White White Light Light Candela Candela Output Output
450450
400400
32°32°
350350
Riviera 43FB www.riviera.com.au
300300
1m1m
250250
50 50
105105 LuxLux 630630 mmmm
50 50
200200
150150
Intensity (cd) Intensity (cd)
100100
50 50
−40° −40°
−30° −30°
−20° −20°
−10° −10°
0° 0°
Angle Angle
70
10°10°
20°20°
30°30°
−40° −40°
13 13 2m2m
28 28 LuxLux 1260 1260 mmmm
13 13
Attractive brass reading lamps offering class leading LED efficiency. Lens Material
UV resistant enhanced impact acrylic
Lamp Body Material
Brass
Lamp Body Surface Finish
Bright Chrome, Satin Nickle Chrome or Gold Plated
Colour Temperature
5000K (White) / 3000K (Warm White)
Dimming
Dimmed via Hella marine 2 Group Dimmer 5XA 998 572-001
Cable
Pre-wired with single core marine cable.
Operating Voltage
12V DC or 24V DC
Power Consumption
< 0.8W ( < 0.07A @ 12V / < 0.03A @ 24V )
Degree of Protection
IP 67 - Completely sealed light engine
Weight
250g (including cable)
e
a
e
a
d
d c c
Dimensions: Dimensions: a = 70 mm / 2.76” b =7055mm mm/ /2.76” 2.17” a= c =5536mm mm/ /2.17” 1.42” b= d =3675mm mm/ /1.42” 2.95” c= e =7565mm mm/ /2.95” 2.56” d= e = 65 mm / 2.56”
b
b
Ponui 0770 series LED Reading Lamps White Light LED Reading Lamp with Switch Voltage
Surface Finish & Material
Part Number
12V DC
Bright Chrome Brass
2JA 980 770-201
12V DC
Satin Chrome Brass
2JA 980 770-211
12V DC
Gold Plated Brass
2JA 980 770-221
24V DC
Bright Chrome Brass
2JA 980 770-301
24V DC
Satin Chrome Brass
2JA 980 770-311
24V DC
Gold Plated Brass
2JA 980 770-321
0771 series LED Reading Lamps Warm White Light LED Reading Lamp with Switch Voltage
Surface Finish & Material
Part Number
12V DC
Bright Chrome Brass
2JA 980 771-201
12V DC
Satin Chrome Brass
2JA 980 771-211
12V DC
Gold Plated Brass
2JA 980 771-221
24V DC
Bright Chrome Brass
2JA 980 771-301
24V DC
Satin Chrome Brass
2JA 980 771-311
24V DC
Gold Plated Brass
2JA 980 771-321
71
0608, 9037 and 0604 Series DuraLed® Lamps
Heavy duty marine lamps. Outstanding light intensity, class leading efficiency and proven durability
DuraLed ® lamps provide powerful white light and a safe, energy efficient and reliable alternative to incandescent and fluorescent lighting. Purposely designed for engine rooms, storage lockers, lazarettes and many heavy duty applications where reliability must not be compromised. Advanced Hella marine lens and optic engineering ensures an ultra wide spread of light without glare or harsh point sources. The range offers three peak intensity levels, all with a very wide spread of light.
MV Jariya www.mcmullenandwing.com
DuraLed ® lamps carry ISO Ignition Protection approvals for safe and certified installations when lamps are located near flammable gas sources such as machinery spaces, tender garages and fuel storage areas. DuraLed ® lamps are surface mounted and feature a unique installation system where the fastening load is taken up by a heavy duty nylon bush to eliminate possible stress on the lamp housing.
Product reliability is second to none, proven worldwide in thousands of highly demanding applications. Each lamp is completely sealed, impact resistant and shock resistant, ensuring an ultra long service life. Each lamp is pre-wired with 2.5m of twin core marine cable for time saving and completely sealed electrical connections. Hella marine MultivoltTM circuitry provides constant illumination and circuit protection from 9-33V DC, even under severe voltage fluctuations.
Completely sealed unit with robust bush mount.
Spike protection, reverse polarity protection and over voltage protection are all built-in benefits of the sophisticated electronics inside each lamp.
- Completely sealed housing and cable entry - Pre-wired with marine cable
Lens Material
UV resistant, enhanced impact acrylic
Colour Temperature
5000K (Cool White)
Cable
Pre-wired with 2.5m of twin core marine cable
Operating Voltage
9-33V DC
Voltage Protection
Spike protected to +500 volts Reverse polarity protected to -700 volts
Power Consumption
20 LED < 4W ( < 0.33A @ 12V / < 0.17A @ 24V ) 36 LED < 7W ( < 0.51A @ 12V / < 0.28A @ 24V ) 50 LED < 10W ( < 0.80A @ 12V / < 0.39A @ 24V )
20 and 36 LED DuraLed® packaging option for aftermarket presentation 72
Degree of Protection
IP 67 - Completely Sealed
Weight
20 and 36 LED 345g (including cable) 50 LED 450g (including cable)
Installation
Surface mount with robust bush mount
Approvals
CE, ISO 8846 (Ignition Protection)
Heavy duty marine LED lamps with class leading efficiency and durability 0608 series 20 LED DuraLed® DuraLed® 20 LED Lamps 800
Voltage
Luminous Intensity - Distance / Lux
DuraLed 20 Candela Output ®
700
Packaging
Part Number
9-33V DC Carton
2JA 980 608-001
9-33V DC Blister
2JA 980 608-002
64°
Luminous Intensity - Distance / Lux
DuraLed® 20 Candela Output
600 800
DuraLed® 20 Candela Output
400 800 600
Luminous Intensity 390 Lux 64°- Distance / Lux195
195
1m
1020 mm
300 700 500
d
64° 195
1m
390 Lux 1020 mm
195
c
a
100 500 300
Intensity (cd)
Intensity (cd)
200 600 400
−40° 400 200
−30°
−20°
−10°
0°
10°
20°
30°
40°
48
2m 1m
195
Angle
−30°
DuraLed® 36 Candela Output
−20°
−10°
0°
10°
20°
30°
Intensity (cd)
Angle
97.5 Lux 390 Lux 2040 mm 1020 mm
195
48
−30°
−20°
−10°
0°
40°
2m
Luminous Intensity Distance / Lux 97.5 -Lux
48
10°
DuraLed® 36Angle Candela Output
20°
30°
40°
2m
48
2040 mm
64°Lux 97.5
48
48
2040 mm Luminous Intensity - Distance / Lux
400 800 600
/ / / /
6.97” 3.94” 1.18” 5.83”
DuraLed® 36 LED Lamps Packaging
Part Number
9-33V DC Carton
2JA 959 037-521
9-33V DC Blister
2JA 959 037-522
1020 mm
300 700 500
300
600 Lux 1020 mm
300
300
150 Lux 600 Lux 2040 mm 1020 mm
300
100 500 300
−40° 400 200
Intensity (cd)
Intensity (cd)
1m
c
a
64° 200 600 400
6.97” 3.94” 1.18” 5.83”
Luminous Intensity 600 Lux 64°- Distance / Lux300
300
1m
Dimensions a = 177mm b = 100mm c = 30mm d = 148mm
Voltage
500 700
DuraLed® 36 Candela Output
/ / / /
d
9037 series 36 LED DuraLed®
100 700
−40° 600 800
Dimensions a = 177mm b = 100mm c = 30mm d = 148mm
b
300 100
200 800 −40°
c
a
500 700
−30°
−10°
0°
10°
20°
30°
40°
75
2m 1m
Angle
d
75
c
a
300 100
200 −40°
−30°
−20°
−10°
0°
10°
DuraLed® 50 Candela Output
20°
30°
40°
2m
75
150 Lux
75
2040 -mm Luminous Intensity Distance / Lux
Angle
700 −30°
−20°
−10°
0°
10°
20°
30°
40°
2m
75
150 Lux 2040 64° mm
Angle
75
Luminous Intensity - Distance / Lux
DuraLed® 50 Candela Output
600 800
0604 series 50 LED DuraLed®
500 700
DuraLed® 50 Candela Output
400 800 600
390
1m
/ / / /
6.97” 3.94” 1.18” 5.83”
d
100
−40°
Dimensions a = 177mm b = 100mm c = 30mm d = 148mm
b
800
Intensity (cd)
−20°
Dimensions a = 177mm b = 100mm c = 30mm d = 148mm
/ / / /
6.97” 3.94” 1.18” 5.83”
DuraLed® 50 LED Lamp
Luminous Intensity 780 Lux 64°- Distance / Lux390
Voltage
1020 mm
Packaging
Part Number
2JA 980 604-011
9-33V DC Carton 300 700 500
64° 390
1m
780 Lux 1020 mm
390
Intensity (cd)
−40° 400 200
−30°
−20°
−10°
0°
10°
20°
30°
40°
97
2m 1m
Angle
390
195 Lux 780 Lux 2040 mm 1020 mm
390
97
300 100
200 −40°
d −30°
−20°
−10°
0°
10°
20°
30°
40°
2m
97
Angle
195 Lux 2040 mm
97
a
100
−40°
c
a
100 500 300
Intensity (cd)
Intensity (cd)
200 600 400
c b
−30°
−20°
−10°
0°
Angle
10°
20°
30°
40°
2m
97
195 Lux 2040 mm
97
Dimensions a = 220mm b = 96mm c = 31mm d = 193mm
/ / / /
8.66” 3.78” 1.22” 7.60”
d Dimensions a = 220mm / 8.66” b = 96mm / 3.78”
73
LED Interior and Exterior Lighting 9700 and 9704 Series DuraLed ® Lamps
Designed and manufactured in New Zealand, compact DuraLed ® lamps feature efficient power saving LED technology with an ultra wide spread of light. Completely sealed and suitable for a wide range of interior or exterior applications, consumption is very low at less than 2.5W (less than 0.20A @ 12V), Switched versions feature completely sealed ON / OFF control via the centre logo. Hella marine LED lamps represent the latest in class leading energy efficiency and maintenance free ‘fit and forget’ technology.
Lens Material
UV resistant, enhanced impact acrylic
Shroud Material
Heavy duty nylon
Colour Temperature
5000K (White) / 3000K (Warm White)
Cable
Pre-wired with 500mm of twin core marine cable
Operating Voltage
12/24V DC
Power Consumption
< 2.5W ( < 0.20A @ 12V / < 0.10A @ 24V )
Degree of Protection
IP 67 - Completely Sealed a
Weight
115g (including cable)
Installation
Surface mount with robust bush mount
Approvals
CE a
- Completely sealed housing - Pre-wired with marine cable
c
b
c Dimensions a = 140 mm / 5.51” b = 65.0 mm / 2.56” c = 32.0 mm / 1.26”
b
Completely sealed unit with robust bush mount.
Dimensions DuraLed® 12 LED Candela andaLux performance. = 140 mm / 5.51”White light. 500
b = 65.0 mm / 2.56” c = 32.0 mm / 1.26”
Luminous Intensity - Distance / Lux
12 LED DuraLed White Light Candela Output
450
120°
400
350
300
1m
250
30
60 Lux 3300mm
30
200
150
Intensity (cd)
100
50
−40°
−30°
−20°
−10°
0°
10°
20°
30°
−40°
2m
8
15 Lux 6600mm
CLEAR LENS
CLEAR LENS
Angle
Packaging for aftermarket presentation
74
White Light DuraLed® 12 LED Lamp Voltage
Shroud Colour
Part Number
8-28V DC
White Shroud
2JA 959 700-101
8-28V DC
White Shroud with switch
2JA 980 704-001
Warm White Light DuraLed® 12 LED Lamp Voltage
Shroud Colour
Part Number
8-28V DC
White Shroud
2JA 959 700-701
8-28V DC
White Shroud with switch
2JA 980 704-501
8
LED Interior and Exterior Lighting 0631 Series EuroLED ® Lamps
New generation EuroLED® recess mount lamps combine single LED technology with precision optics for impressive light output and energy efficiency.
a
a
a a Consuming 4W, each lamp is a completely sealed unit ensuring an ultra long service life in interior or exterior installations. MultivoltTM circuitry provides consistent illumination and protection across 9-33V DC, even under severe voltage fluctuations and low battery voltages. 0-10V dimming versions include an extra signal cable for connection with remote dimmers to achieve ambient control onboard.
c
a
b
a a
c c
” ” ”
a a
b b
Dimensions a = 150 mm / 5.90” b = a124 mm / 4.88” c = 20 mm / 0.79”
a
Dimensions Dimensions a =a =150 150 mm mm/ /5.90” 5.90” b =b =124 124 mm mm/ /4.88” 4.88” c =c =20 20 mm mm / /0.79” 0.79”
Lens Material
UV resistant enhanced impact acrylic
Rim Material a a
UV resistant plastic. 316 stainless steel
Colour Temperature
4200K (White) 3000K (Warm White)
Cable
Pre-wired with 500mm of twin or triple core marine cable
Operating Voltage
MultivoltTM 9-33V DC
Power Consumption
4.0W ( 0.33A@12V / 0.16A@24V )
Degree of Protection
Completely Sealed
Weight
245g (including cable)
Installation
Recessed mount
Approvals
CE
EuroLED® Candela and Lux a performance. White light.
a
c
a a
c c
- Sealed cable entry - Pre-wired with marine cable
a a
450
a
b
Luminous Intensity - Distance / Lux
EuroLED White Light Candela Output
500
400
28°
350
a a
b b
300
1m
250
175
350 Lux 500 mm
175
a 200
Dimensions Dimensions a = a150 mmmm/ /5.90” = 150 5.90” Dimensions Dimensions = 124 4.88” a =a =150 150 mm mm / b 5.90” b / =5.90” 124 mmmm/ /4.88” b =b =124 124 mm mm/ 4.88” / c4.88” = 20 mm / 0.79” c = 20 mm / 0.79”
150
100
Intensity (cd)
c =c =20 20 mm mm / 0.79” / 0.79”
50
−40°
−30°
−20°
−10°
0°
10°
20°
30°
−40°
2m 44
Angle
CLEAR LENS
b b
a a
b
0631 series aEuroLED ® lamps.
a
c
44
a a
a a
c c
88 Lux 1000 mm
Dimensions Dimensions
® White Light Lamps a a= EuroLED = 150150 mm mm/ 5.90” / 5.90”
Voltage
9-33V DC
a
9-33V DC CLEAR LENS
Dimensions Part Number a = 150 mm / 5.90” White plastic rim b = 124 mm 2JA/ 980 4.88”631-501 c = rim 20 mm2JA/ 980 0.79”631-511 Polished stainless steel
b b = = 124124 mm mm/ 4.88” / 4.88” Finish c c= Rim = 20 20 mm mm / 0.79” / 0.79”
Warm White Light EuroLED® Lamps Voltage
Rim Finish
Part Number
9-33V DC
White plastic rim
2JA 980 631-601
9-33V DC
Polished stainless steel rim 2JA 980 631-611
Packaging for aftermarket presentation
CLEAR LENS
CLEAR LENS
0631 series EuroLED ® lamps with 0-10V dimming. Dimming White Light EuroLED® Lamps Voltage
Rim Finish
Part Number
9-33V DC
White plastic rim
2JA 980 631-001
9-33V DC
Polished stainless steel rim 2JA 980 631-011
Warm White Light EuroLED® Lamps Voltage
Rim Finish
Part Number
9-33V DC
White plastic rim
2JA 980 631-101
9-33V DC
Polished stainless steel rim 2JA 980 631-111 75
0630 Series EuroLED® Touch Lamps
New generation EuroLED® Touch. Efficient, state-of-the art LED lamps offering advanced technology for durable and power saving interior and exterior installations.
The durability and single LED efficiency of Hella marine EuroLED ® technology continues in a new generation of completely sealed recess mount LED lamps. Proven Hella marine touch switching technology makes lighting control beautifully simple. Touch the red pad for red light, the white pad for white light. Hold your finger on the pad for more than two seconds and the lamp will cycle through increasing / decreasing intensity levels until the maximum / minimum intensity is achieved. Release your finger on the light level required. Power consumption is a low 4W on neutral white or warm white (0.33A @12V) and less than 1.5W on red (less than 0.125A@12V). This provides significant energy savings on board, yet each device offers an effective intensity and wide spread of effective illumination and comfortable colour temperatures. Glare diffusion without light loss is important with any LED lamp to maintain efficiency and safety, particularly with powerful lamps such as the EuroLED ® series. Without the protection of advanced optics, significant eye strain can result from periods of looking directly into a powerful LED point source. Advanced Hella marine lens technology provides a safe, smooth and uniform light pattern, without glare or discomfort. Dual colour EuroLED ® lamps can be remotely operated from multiple points with ‘off the shelf’ ON/OFF/ON momentary switches. Holding one of the external switches for two seconds will synchronise the lamps to the same dimming level. Light levels are ‘remembered’ by the lamps circuitry, even when a vessel’s batteries are turned off. The lamp will always turn on at the colour intensity previously set, regardless of power interruption. Packaging for aftermarket presentation
76
The durability of EuroLED ® Touch lamps is outstanding. Each device is a sealed unit, highly impact and shock resistant for an ultra long service life. Integrated MultivoltTM electronics provide consistent illumination and protection across a range of input voltages from 9-33 DC, even under severe voltage fluctuations, low battery voltages and long cable runs. EuroLED ® Touch technology provides ultra reliable, power saving illumination for a wide range of commercial and recreational applications.
- Sealed cable entry - Pre-wired with marine cable
a
a
a
a
c
Advanced LED lamps for interior and exterior applications a
b
a a
c c
s m / 5.90” m / 4.88” m / 0.79”
a a
b b
Dimensions a = 150 mm / 5.90” b = 124 mm / 4.88” a c = 20 mm / 0.79”
a
Dimensions Dimensions a =a =150 150 mm mm/ /5.90” 5.90” b =b =124 124 mm mm/ /4.88” 4.88” c =c =20 20 mm mm / /0.79” 0.79”
a
c
Lens Material
UV resistant enhanced impact acrylic
Rim Material
UV resistant plastic. 316 stainless steel
Colour Temperature
4200K (White) 3000K (Warm White)
Cable
Pre-wired with 500mm of twin core or triple core marine cable
a a
Operating Voltage
MultivoltTM 9-33V DC
Power Consumption
4.0W ( 0.33A@12V / 0.16A@24V )
Degree of Protection
Completely Sealed
Weight
245g (including cable)
Installation
Recessed mount
Approvals
CE
EuroLED® Touch Candela and Lux performance. White light. a
Luminous Intensity - Distance / Lux
EuroLED White Light Candela Output
500
450
a a
c c
s m / 5.90” m / 4.88” m / 0.79”
400
a
b
28°
350
300
a a
b b
a a
1m
250
175
350 Lux 500 mm
175
200
a
Dimensions Dimensions a = 150 mm / 5.90” Dimensions Dimensions a = 150 mm / 5.90” b150 = mm 124 a =a =150 mm / 5.90” / mm 5.90” / 4.88” b = 124 mm / 4.88” b =b =124 mm / 4.88” /mm 4.88” / 0.79” c124 = mm 20 c = 20 mm / 0.79” c =c =20 20 mm mm / 0.79” / 0.79”
150
100
Intensity (cd)
a
50
−40°
−30°
−20°
−10°
0°
10°
20°
30°
−40°
2m 44
Angle
a a
a a
c c
a
c
CLEAR LENS
44
Dual colour EuroLED ® Touch lamps with dimming and remote momentary switch control. a Touch Dimensions the colour pad for ON/OFF, hold finger on the pad to cycle through dimming levels. Dimensions a a= = 150150 mm mm/ 5.90” / 5.90” b b = = 124124 mm mm/ 4.88” / 4.88” c c= = 20 20 mm mm / 0.79” / 0.79”
Dimensions a ®= 150 mm / 5.90” White / Red Light EuroLED Touch Lamps b = 124 mm / 4.88” c = 20 mm / 0.79” Voltage
Rim Finish
Part Number
9-33V DC
White plastic rim
2JA 980 630-001
9-33V DC
Polished stainless steel rim 2JA 980 630-011
Warm White / Red Light EuroLED® Touch Lamps Voltage
Rim Finish
Part Number
9-33V DC
White plastic rim
2JA 980 630-101
9-33V DC
Polished stainless steel rim 2JA 980 630-111
White or Warm White EuroLED ® Touch lamps without dimming or momentary switch control. Touch the white pad for ON, touch the black pad for OFF. CLEAR LENS
a
CLEAR LENS
b
CLEAR LENS
a a
b b
88 Lux 1000 mm
White Light EuroLED® Touch Lamps Voltage
Rim Finish
Part Number
9-33V DC
White plastic rim
2JA 980 630-501
9-33V DC
Polished stainless steel rim 2JA 980 630-511
Warm White Light EuroLED® Touch Lamps Voltage
Rim Finish
Part Number
9-33V DC
White plastic rim
2JA 980 630-601
9-33V DC
Polished stainless steel rim 2JA 980 630-611 77
9950 and 9951 Series EuroLED® Touch Lamps
Advanced LED lamps with touch sensitive switching. Power saving and ultra durable
Designed and manufactured in New Zealand, EuroLED ® Touch lamps provide red / white, blue / white or white only light using the latest completely sealed touch sensitive technology. Lighting control is beautifully simple. Touch the colour pad for red or blue light, the white pad for white light. On the dual colour versions, hold your finger on the pad for more than two seconds and the lamp will cycle through four dimming levels. Release your finger on the light level required. Dual colour EuroLED ® Touch lamps can also be remotely operated from multiple points with ‘off the shelf’ ON/OFF/ON momentary switches. Holding one of the external switches for two seconds will synchronise the lamps to the same dimming level.
The durability of EuroLED ® Touch lamps is outstanding. Each lamp is completely waterproof, impact and shock resistant, for an ultra long service life. MultivoltTM circuitry provides consistent illumination across a range of input voltages from 9-33 DC, even under severe voltage fluctuations. EuroLED ® Touch lamps overcome the poor reliability and light output problems of incandescent lamps. They provide ultra reliable, power saving lighting for all types of commercial and recreational applications.
Light levels are ‘remembered’ by the lamps circuitry, even when a vessel’s batteries are turned off. The lamp will always turn on at the colour intensity previously set, regardless of power interruption. EuroLED ® Touch current draw is 4W on white (0.33A @ 12V) and less than 1.5W on red or blue (less than 0.125A @ 12V) to provide significant power savings. Completely sealed unit with robust bush mount.
78
Glare diffusion without light loss is important with any LED lamp to maintain efficiency and safety, particularly with powerful lamps such as the EuroLED ® series. Without the protection of advanced optics, significant eye strain can result from periods of looking directly into a powerful LED point source. Advanced Hella marine lens technology provides a safe, smooth and uniform light pattern, without glare or discomfort.
- Completely sealed housing and cable entry - Pre-wired with marine cable - Mounting bosses eliminate torque load on housing - Heavy duty shroud clips over lamp body
Advanced LED lamps with touch sensitive switching
Dimensions a = 129.5mm / 5.10” Dimensions = 29.5mm / 1.16” ab = 129.5mm / 5.10” c = 110mm / 4.33”
b = 29.5mm c = 110mm
/ 1.16” / 4.33”
Lens Material
UV resistant enhanced impact acrylic
Shroud Material
Heavy duty nylon
Colour Temperature
5000K (White)
Cable
Pre-wired with 2.5m of twin core marine cable
Operating Voltage
MultivoltTM 9-33V DC
Power Consumption
4.0W ( 0.33A@12V / 0.16A@24V )
Degree of Protection
IP 6K6 6K7 - Completely Sealed
Weight
290g (including cable)
Installation
Surface mount with robust bush mount
Approvals
CE, ISO 8846 (Ignition Protection)
EuroLED® Spacer Rings Eliminates the need for a cable hole behind lamp.
EuroLED® Touch Candela and Lux performance. White light.
Black spacer 8HG 959 952-002 Luminous Intensity - Distance / Lux
EuroLED White Light Candela Output
500
White spacer 8HG 959 952-012
450
400
28°
350
300
1m
250
175
350 Lux 500 mm
175
200
150
100
Intensity (cd)
Packaging for aftermarket presentation
50
−40°
−30°
−20°
−10°
0°
10°
20°
30°
−40°
2m 44
Angle
88 Lux 1000 mm
44
Dual colour EuroLED ® Touch lamps with dimming and remote momentary switch control. Touch the colour pad for ON/OFF, hold finger on the pad to cycle through dimming levels.
CLEAR LENS
9950 series White / Red Light EuroLED® Touch Lamps Voltage
Shroud Colour
Part Number
9-33V DC
White Shroud
2JA 959 950-121
9-33V DC
Black Shroud
2JA 959 950-111
CLEAR LENS
9951 series White / Blue Light EuroLED® Touch Lamps Voltage
Shroud Colour
Part Number
9-33V DC
White Shroud
2JA 959 951-121
9-33V DC
Black Shroud
2JA 959 951-111
Single White EuroLED ® Touch lamps without dimming or momentary switch control. Touch the white pad for ON, touch the black pad for OFF.
CLEAR LENS
9950 series Single White Light EuroLED® Touch Lamps Voltage
Shroud Colour
Part Number
9-33V DC
White Shroud
2JA 959 950-521
9-33V DC
Black Shroud
2JA 959 950-511
79
LED Interior and Exterior Lighting 9820 Series EuroLED ® Lamps
EuroLED® lamps combine the power saving benefits of single LED technology with precision optics providing impressive light output and energy efficiency. With a current draw of less than 4W (less than 0.33A @ 12V), EuroLED® interior lamps save power onboard. MultivoltTM technology provides consistent illumination and circuit protection from 9-33V DC, even under severe voltage fluctuations. Each lamp is completely sealed, impact resistant and shock resistant, ensuring an ultra long service life and ideal for interior or exterior installations.
Lens Material
UV resistant enhanced impact acrylic
Shroud Material
Heavy duty nylon
Colour Temperature
5000K (White) 3000K (Warm White)
Cable
Pre-wired 2.5m of twin core marine cable
Operating Voltage
MultivoltTM 9-33V DC
Power Consumption
4.0W ( 0.33A@12V / 0.16A@24V )
Degree of Protection
IP 6K6 6K7 - Completely Sealed
Weight
290g (including cable)
Installation
Surface mount with robust bush mount
Approvals
CE, ISO 8846 (Ignition Protection)
- Completely sealed housing - Pre-wired with marine cable
Dimensions a = 129.5mm / 5.10” b = 29.5mm / 1.16” c = 110mm / 4.33”
EuroLED® Spacer Rings Eliminates the need for a cable hole behind lamp. Black spacer 8HG 959 952-002
Dimensions a = 129.5mm / 5.10” EuroLED® b = 29.5mm / 1.16” c = 110mm / 4.33”
White spacer 8HG 959 952-012
Dimensions
a = 129.5mm / 5.10” Candela and Lux performance. White light. b = 29.5mm / 1.16”
500
c = 110mm
EuroLED White Light Candela Output
/ 4.33”
Luminous Intensity - Distance / Lux
450
400
28°
350
300
1m
250
175
350 Lux 500 mm
175
200
150
Packaging for aftermarket presentation
Intensity (cd)
100
Completely sealed unit with robust bush mount.
50
−40°
−30°
−20°
−10°
0°
10°
20°
30°
−40°
2m 44
CLEAR LENS
CLEAR LENS
Angle
80
White Light EuroLED® Lamps Voltage
Shroud Colour
Part Number
9-33V DC
White Shroud
2JA 959 820-521
9-33V DC
Black Shroud
2JA 959 820-511
Warm White Light EuroLED® Lamps Voltage
Shroud Colour
Part Number
9-33V DC
White Shroud
2JA 959 820-321
9-33V DC
Black Shroud
2JA 959 820-301
88 Lux 1000 mm
44
LED Interior and Exterior Lighting 3227 Series CargoLED ® Lamp
Hella marine CargoLED® LED lamps offer durable illumination for a wide range of heavy duty interior and exterior applications including storage lockers, exposed surfaces and wet areas. Completely sealed within a low profile housing, the lamps are highly resistant to vibration and saltwater for an ultra long service life. MultivoltTM circuitry provides consistent illumination and circuit protection from 9-31V DC, even under severe voltage fluctuations. The operating range covers temperatures from -40 to +60 degrees.
Housing Material
UV resistant, enhanced impact acrylic lens Anodized aluminium lamp base
Colour Temperature
6000K (Cool White)
Cable
Pre-wired with 300mm of twin core cable
Operating Voltage
MultivoltTM 9-31V DC
Power Consumption
6W ( 0.5A@12V / < 0.25A@24V )
Degree of Protection
IP 67 - Completely Sealed
Weight
280g (including cable)
Approvals
CE
c a
b
Dimensions a = 180mm / 7.09” b = 23.5mm / 0.93” c = 140mm / 5.52”
c a
500
b
Dimensions a = ®180mm / 7.09” CargoLED Candela and Lux performance. White light. b = 23.5mm / 0.93” c =Cargo 140mm / 5.52” Luminous Intensity - Distance / Lux LED White Light Candela Output
450
34°
400
350
300
105
1m
250
210 Lux 620 mm
105
200
150
Intensity (cd)
100
50
−40°
−30°
−20°
−10°
0°
10°
20°
30°
−40°
2m
26
52.5 Lux 1240 mm
26
CLEAR LENS
Angle
White Light CargoLED® Lamp Voltage
Housing Colour
Part Number
9-31V DC
Silver
2604
81
8560 Series Courtesy Lamps
Easy Fit
Attractive and timeless LED courtesy lighting for a wide variety of interior and exterior lighting applications
Light is radiated downward at an angle of 30° making these lamps ideal for illuminating on board areas such as steps, stairs, toe kicks, storage areas, companion ways, deck fittings, signs and switches. MultivoltTM electronics ensure constant light output in 12V or 24V DC systems. Easy Fit series lamps are completely sealed, shock and vibration resistant and represent reliable ‘fit and forget’ technology.
Mounting with screws. Push on plastic cap versions.
Each lamp is pre-wired with 120mm of marine tinned cable and supplied with stainless steel screws.
Mounting with screws. Stainless steel cap versions
- Completely sealed housing - Pre-wired with marine cable
Packaging for aftermarket presentation
Mounting without screws. Push on plastic cap versions only.
Note - Lamp covers cannot be removed easily once clipped into place.
82
8560 Series Easy Fit Courtesy Lamps Lens Material
UV resistant enhanced impact acrylic
Cap Material
Black, white, chrome plated plastic, polished 316 stainless steel
Cable
Pre-wired with 120mm of twin core marine cable
Operating Voltage
MultivoltTM 12 / 24V DC
Dimensions Power Consumption a = 45mm / 1.77” Degree of Protection b = 31.5mm / 1.24” Weight c = 25.4mm / 1.00” d = 14mm / 0.55” Approvals e = 22.7mm / 0.89” e
0.5W Dimensions ( < 0.04A@12V / < 0.02A@24V )
= 45mmSealed / 1.77” IP 67 a - Completely
b = 31.5mm / 1.24” c = 25.4mm / 1.00” PlasticdCap 15g (including cable) = -14mm / 0.55” CE e = 22.7mm / 0.89”
Stainless Cap - 30g (including cable)
e
a
c
CLEAR LENS
CLEAR LENS
CLEAR LENS
CLEAR LENS
d
CLEAR LENS
9AR 994 554-211 Polished 316 Stainless Steel Cap and Mounting Screw Kit.
c
b
d
Accessories to suit 8560 series
a
Dimensions a = 45mm / b = 31.5mm / c = 25.4mm b/ d = 14mm / e = 22.7mm / e
1.77” 1.24” 1.00” 0.55” 0.89”
a
White Light Easy Fit LED Step Lamps
c
Voltage
Cap Finish
12-24V DC
Chrome plated cap
12-24V DC
White plastic cap
2JA 998 560-011
b
Part Number d
2JA 998 560-001
12-24V DC
Gold plated cap
2JA 998 560-081
12-24V DC
Black plastic cap
2JA 998 560-111
12-24V DC
Satin chrome plated cap
2JA 998 560-121
12-24V DC
Polished stainless steel cap
2JA 998 560-161
Warm White Light Easy Fit LED Step Lamps Voltage
Cap Finish
12-24V DC
Chrome plated cap
Part Number
2JA 998 560-401
12-24V DC
White plastic cap
2JA 998 560-411
12-24V DC
Gold plated cap
2JA 998 560-431
12-24V DC
Black plastic cap
2JA 998 560-421
12-24V DC
Satin chrome plated cap
2JA 998 560-441
12-24V DC
Polished stainless steel cap
2JA 998 560-451
Blue Light Easy Fit LED Step Lamps Voltage
Cap Finish
Part Number
12-24V DC
Chrome plated cap
2JA 998 560-041
12-24V DC
White plastic cap
2JA 998 560-051
12-24V DC
Gold plastic cap
2JA 998 560-091
12-24V DC
Black plastic cap
2JA 998 560-151
12-24V DC
Satin chrome plated cap
2JA 998 560-101
12-24V DC
Polished stainless steel cap
2JA 998 560-171
Amber Light Easy Fit LED Step Lamps Voltage
Cap Finish
Part Number
12-24V DC
Chrome plated cap
2JA 998 560-301
12-24V DC
White plastic cap
2JA 998 560-311
12-24V DC
Gold plated cap
2JA 998 560-331
12-24V DC
Black plastic cap
2JA 998 560-321
12-24V DC
Satin chrome plated cap
2JA 998 560-341
12-24V DC
Polished stainless steel cap
2JA 998 560-351
Red Light Easy Fit LED Step Lamps Voltage
Cap Finish
Part Number
12-24V DC
Chrome plated cap
2JA 998 560-201
12-24V DC
White plastic cap
2JA 998 560-211
12-24V DC
Gold plated cap
2JA 998 560-231
12-24V DC
Black plastic cap
2JA 998 560-221
12-24V DC
Satin chrome plated cap
2JA 998 560-241
12-24V DC
Polished stainless steel cap
2JA 998 560-251 83
0500, 0501, 0502, 0503, 0507 and 0508 Series Round Courtesy Lamps
Slim Line Round
Attractive, energy efficient lighting for interior and exterior use
Packaging for aftermarket presentation
Available in nine exciting colours, Hella marine round LED courtesy lamps can be installed almost anywhere on board.
Surface mounting accessory rings provide numerous installation options with surface finishes to compliment or contrast the lamp rims.
Advanced lens technology provides a cool and even spread of soft light without glare or eye strain. Hella marine LED courtesy lamps consume a fraction of the energy of traditional bulb lamps and run very cool due to their low current draw of less than 0.5W (less than 0.04A @ 12V). This provides safer installation into light weight materials where the heat of incandescent lamps may cause damage to the surrounding structure. Each lamp is completely sealed, highly shock, impact and vibration resistant, perfectly suited for the demanding marine environment.
Hella marine LED courtesy lamps represent ultra reliable, energy efficient, ‘fit and forget’ technology.
- Completely sealed housing - Pre-wired with marine cable
Lens Material
UV resistant enhanced impact acrylic
Rim Material
UV resistant plastic. 316 stainless steel
Dimming
Dimmed via Hella marine Dimmer 5XA 998 572-001
Cable
Pre-wired with 120mm of single core marine cable
Operating Voltage
12V DC or 24V DC
Power Consumption
< 0.5W ( < 0.042A @ 12V / < 0.02A @ 24V )
Degree of Protection
IP 67 - Completely Sealed
Mounting
Stainless steel screws included
Weight
50g (including cable)
b
b
b
a
a
d
d
84
c
d
c
e
a
e
e
f
c
f
Dimensions a = 50.0Dimensions mm / 1.97” Dimensions b a= =13.0 / /0.51” amm =mm 50.0 mm / 1.97” 50.0 1.97” c = 21.0bmm / 0.83” 13.0 / 0.51” b = 13.0=mm / mm 0.51” d = 75.0cmm / 2.95” with plastic rim 21.0 / 0.83” c = 21.0=mm / mm 0.83” 72.0dmm / 2.83” with stainless rimrim =mm 75.0 / with 2.95” with steel plastic d = 75.0 / mm 2.95” plastic rim e = 75.0 mm / 2.95” 72.0 mm / 2.83” with stainless steel rim 72.0 mm / 2.83” with stainless steel rim f = 15 .0 mm / 0.59” e =mm 75.0/ mm / 2.95” e = 75.0 2.95” f 15 .0 / 0.59” f = 15f.0=mm / mm 0.59”
Enhanced Brightness Round Courtesy Lamps WHITE LIGHT ROUND ENHANCED BRIGHTNESS* LED LAMPS Rim Finish
12V Part Number
24V Part Number
Satin stainless steel rim Polished stainless steel rim Gold stainless steel rim White plastic rim Black plastic rim
2XT 980 500-591 2XT 980 500-521 2XT 980 500-531 2XT 980 500-541 2XT 980 500-551
2XT 980 501-591 2XT 980 501-521 2XT 980 501-531 2XT 980 501-541 2XT 980 501-551
Over 3 x brighter than regular Soft Light White and Warm White LED courtesy lamps. *Enhanced brightness lamps include a surface mounting ring with 3 x stainless steel screws. Stainless steel and white rim lamps include a white spacer, black rim lamps a black spacer.
WARM WHITE ROUND ENHANCED BRIGHTNESS* LED LAMPS Rim Finish
12V Part Number
24V Part Number
Satin stainless steel rim Polished stainless steel rim Gold stainless steel rim White plastic rim Black plastic rim
2XT 980 500-791 2XT 980 500-721 2XT 980 500-731 2XT 980 500-741 2XT 980 500-751
2XT 980 501-791 2XT 980 501-721 2XT 980 501-731 2XT 980 501-741 2XT 980 501-751
Soft Light Round Courtesy Lamps Amber Light Round LED Courtesy Lamps
White Light Round LED Courtesy Lamps Rim Finish
12V Part Number
24V Part Number
Satin stainless steel rim Polished stainless steel rim Gold stainless steel rim White plastic rim Black plastic rim
2XT 980 500-091 2XT 980 500-021 2XT 980 500-031 2XT 980 500-041 2XT 980 500-051
2XT 980 501-091 2XT 980 501-021 2XT 980 501-031 2XT 980 501-041 2XT 980 501-051
Rim Finish
12V Part Number
24V Part Number
Satin stainless steel rim Polished stainless steel rim Gold stainless steel rim White plastic rim Black plastic rim
2XT 980 507-091 2XT 980 507-021 2XT 980 507-031 2XT 980 507-041 2XT 980 507-051
2XT 980 508-091 2XT 980 508-021 2XT 980 508-031 2XT 980 508-041 2XT 980 508-051
Red Light Round LED Courtesy Lamps
Warm White Light Round LED Courtesy Lamps Rim Finish
12V Part Number
24V Part Number
Satin stainless steel rim Polished stainless steel rim Gold stainless steel rim White plastic rim Black plastic rim
2XT 980 500-291 2XT 980 500-221 2XT 980 500-231 2XT 980 500-241 2XT 980 500-251
2XT 980 501-291 2XT 980 501-221 2XT 980 501-231 2XT 980 501-241 2XT 980 501-251
Green Light Round LED Courtesy Lamps
Rim Finish
12V Part Number
24V Part Number
Satin stainless steel rim Polished stainless steel rim Gold stainless steel rim White plastic rim Black plastic rim
2XT 980 507-301 2XT 980 507-221 2XT 980 507-231 2XT 980 507-241 2XT 980 507-251
2XT 980 508-291 2XT 980 508-221 2XT 980 508-231 2XT 980 508-241 2XT 980 508-251
Deep Red Light Round LED Courtesy Lamps
Rim Finish
12V Part Number
24V Part Number
Satin stainless steel rim Polished stainless steel rim Gold stainless steel rim White plastic rim Black plastic rim
2XT 980 502-091 2XT 980 502-021 2XT 980 502-031 2XT 980 502-041 2XT 980 502-051
2XT 980 503-091 2XT 980 503-021 2XT 980 503-031 2XT 980 503-041 2XT 980 503-051
Rim Finish
12V Part Number
24V Part Number
Satin stainless steel rim Polished stainless steel rim Gold stainless steel rim White plastic rim Black plastic rim
2XT 980 507-491 2XT 980 507-421 2XT 980 507-431 2XT 980 507-441 2XT 980 507-451
2XT 980 508-491 2XT 980 508-421 2XT 980 508-431 2XT 980 508-441 2XT 980 508-451
Orange Light Round LED Courtesy Lamps
Blue Light Round LED Courtesy Lamps Rim Finish
12V Part Number
24V Part Number
Satin stainless steel rim Polished stainless steel rim Gold stainless steel rim White plastic rim Black plastic rim
2XT 980 502-291 2XT 980 502-221 2XT 980 502-231 2XT 980 502-241 2XT 980 502-251
2XT 980 503-291 2XT 980 503-221 2XT 980 503-231 2XT 980 503-241 2XT 980 503-251
Rim Finish
12V Part Number
24V Part Number
Satin stainless steel rim Polished stainless steel rim Gold stainless steel rim White plastic rim Black plastic rim
2XT 980 507-691 2XT 980 507-621 2XT 980 507-631 2XT 980 507-641 2XT 980 507-651
2XT 980 508-691 2XT 980 508-621 2XT 980 508-631 2XT 980 508-641 2XT 980 508-651
Cyan Light Round LED Courtesy Lamps Rim Finish
12V Part Number
24V Part Number
Satin stainless steel rim Polished stainless steel rim Gold stainless steel rim White plastic rim Black plastic rim
2XT 980 502-491 2XT 980 502-421 2XT 980 502-431 2XT 980 502-441 2XT 980 502-451
2XT 980 503-491 2XT 980 503-421 2XT 980 503-431 2XT 980 503-441 2XT 980 503-451
Surface Mounting Accessories Black Spacer 8HG 959 993-102 White Spacer 8HG 959 993-112
85
0580, 0581, 0582, 0583, 0587 and 0588 Series Square Courtesy Lamps
Slim Line Square
Attractive, energy efficient lighting for interior and exterior use
Hella marine LED square courtesy lamps can be installed almost anywhere on board.
Surface mounting accessory rings provide numerous installation options with surface finishes to compliment or contrast the lamp rims.
Each lamp is completely sealed, highly shock, impact and vibration resistant, perfectly suited for the demanding marine environment.
Hella marine LED courtesy lamps represent ultra reliable, energy efficient, ‘fit and forget’ technology.
Advanced lens technology provides a cool and even spread of soft light without glare or eye strain. Hella marine LED courtesy lamps consume a fraction of the energy of traditional bulb lamps and run very cool due to their low current draw of less than 0.5W (less than 0.04A @ 12V). This provides safer installation into light weight materials where the heat of incandescent lamps may cause damage to the surrounding structure.
- Completely sealed housing - Pre-wired with marine cable
Lens Material
UV resistant enhanced impact acrylic
Rim Material
UV resistant plastic
Dimming
Dimmed via Hella marine Dimmer 5XA 998 572-001
Cable
Pre-wired with 120mm of single core marine cable
Operating Voltage
12V DC or 24V DC
Power Consumption
< 0.5W ( < 0.042A @ 12V / < 0.02A @ 24V )
Degree of Protection
IP 67 - Completely Sealed
Mounting
Stainless steel screws included
Weight
a 50g (including cable)
b
c
a
Packaging for aftermarket presentation a b
a
86
b
c
a
a
a
d
a
d
ca
Dimensions a = 60.0 mm b = 16.0 mm c = 50.0 mm d = 22.0 mm e = 17.0 mm
a
d
Dimensions Dimensions a = 60.0 a = 60.0 mm mm / 2.36” / 2.36” b = 16.0 b = 16.0 mm mm / 0.63” / 0.63” c = 50.0 c = 50.0 mm mm / 1.97” / 1.97” d = 22.0 d = 22.0 mm mm / 0.87” / 0.87” e = 17.0 e = 17.0 mm mm / 0.67” / 0.67”
a
a
e
e
/ / / / /
2.36” 0.63” 1.97” 0.87” 0.67”
e
Enhanced Brightness Square Courtesy Lamps WHITE LIGHT SQUARE ENHANCED BRIGHTNESS* LED LAMPS Rim Finish
12V Part Number
24V Part Number
Satin chrome plated rim Chrome plated rim Gold plated rim White plastic rim Black plastic rim
2XT 980 580-561 2XT 980 580-571 2XT 980 580-531 2XT 980 580-551 2XT 980 580-541
2XT 980 581-561 2XT 980 581-571 2XT 980 581-531 2XT 980 581-551 2XT 980 581-541
Over 3 x brighter than regular Soft Light White and Warm White LED courtesy lamps. *Enhanced brightness lamps include a surface mounting ring with 4 x stainless steel screws.
WARM WHITE LIGHT SQUARE ENHANCED BRIGHTNESS* LED LAMPS Rim Finish
12V Part Number
24V Part Number
Satin chrome plated rim Chrome plated rim Gold plated rim White plastic rim Black plastic rim
2XT 980 580-761 2XT 980 580-771 2XT 980 580-731 2XT 980 580-751 2XT 980 580-741
2XT 980 581-761 2XT 980 581-771 2XT 980 581-731 2XT 980 581-751 2XT 980 581-741
Soft Light Square Courtesy Lamps White Light Square LED Courtesy Lamps
Amber Light Square LED Courtesy Lamps
Rim Finish
12V Part Number
24V Part Number
Rim Finish
12V Part Number
24V Part Number
Satin chrome plated rim Chrome plated rim Gold plated rim White plastic rim Black plastic rim
2XT 980 580-061 2XT 980 580-071 2XT 980 580-031 2XT 980 580-051 2XT 980 580-041
2XT 980 581-061 2XT 980 581-071 2XT 980 581-031 2XT 980 581-051 2XT 980 581-041
Satin chrome plated rim Chrome plated rim Gold plated rim White plastic rim Black plastic rim
2XT 980 587-061 2XT 980 587-071 2XT 980 587-031 2XT 980 587-051 2XT 980 587-041
2XT 980 588-061 2XT 980 588-071 2XT 980 588-031 2XT 980 588-051 2XT 980 588-041
Warm White Light Square LED Courtesy Lamps
Red Light Square LED Courtesy Lamps
Rim Finish
12V Part Number
24V Part Number
Satin chrome plated rim Chrome plated rim Gold plated rim White plastic rim Black plastic rim
2XT 980 580-261 2XT 980 580-271 2XT 980 580-231 2XT 980 580-251 2XT 980 580-241
2XT 980 581-261 2XT 980 581-271 2XT 980 581-231 2XT 980 581-251 2XT 980 581-241
Rim Finish
12V Part Number
24V Part Number
Satin chrome plated rim Chrome plated rim Gold plated rim White plastic rim Black plastic rim
2XT 980 587-261 2XT 980 587-271 2XT 980 587-231 2XT 980 587-251 2XT 980 587-241
2XT 980 588-261 2XT 980 588-271 2XT 980 588-231 2XT 980 588-251 2XT 980 588-241
Green Light Square LED Courtesy Lamps
Deep Red Light Square LED Courtesy Lamps
Rim Finish
12V Part Number
24V Part Number
Satin chrome plated rim Chrome plated rim Gold plated rim White plastic rim Black plastic rim
2XT 980 582-061 2XT 980 582-071 2XT 980 582-031 2XT 980 582-051 2XT 980 582-041
2XT 980 583-061 2XT 980 583-071 2XT 980 583-031 2XT 980 583-051 2XT 980 583-041
Rim Finish
12V Part Number
24V Part Number
Satin chrome plated rim Chrome plated rim Gold plated rim White plastic rim Black plastic rim
2XT 980 587-461 2XT 980 587-471 2XT 980 587-431 2XT 980 587-451 2XT 980 587-441
2XT 980 588-461 2XT 980 588-471 2XT 980 588-431 2XT 980 588-451 2XT 980 588-441
Orange Light Square LED Courtesy Lamps
Blue Light Square LED Courtesy Lamps Rim Finish
12V Part Number
24V Part Number
Satin chrome plated rim Chrome plated rim Gold plated rim White plastic rim Black plastic rim
2XT 980 582-261 2XT 980 582-271 2XT 980 582-231 2XT 980 582-251 2XT 980 582-241
2XT 980 583-261 2XT 980 583-271 2XT 980 583-231 2XT 980 583-251 2XT 980 583-241
Rim Finish
12V Part Number
24V Part Number
Satin chrome plated rim Chrome plated rim Gold plated rim White plastic rim Black plastic rim
2XT 980 587-661 2XT 980 587-671 2XT 980 587-631 2XT 980 587-651 2XT 980 587-641
2XT 980 588-661 2XT 980 588-671 2XT 980 588-631 2XT 980 588-651 2XT 980 588-641
Cyan Light Square LED Courtesy Lamps Rim Finish
12V Part Number
24V Part Number
Satin chrome plated rim Chrome plated rim Gold plated rim White plastic rim Black plastic rim
2XT 980 582-461 2XT 980 582-471 2XT 980 582-431 2XT 980 582-451 2XT 980 582-441
2XT 980 583-461 2XT 980 583-471 2XT 980 583-431 2XT 980 583-451 2XT 980 583-441
Surface Mounting Accessories
Chrome plated spacer Gold plated spacer Satin chrome plated spacer Black spacer White spacer
8HG 959 993-512 8HG 959 993-522 8HG 959 993-532 8HG 959 993-602 8HG 959 993-542
87
9680 Series Step Lamps
Stylish, compact and power saving interior or exterior step lamps
Completely sealed and ultra durable, Hella marine LED step lamps are proven the worldwide. 9680 series lamps feature engineered optics to direct light downwards at 30 degrees safely illuminating deck and step tread surfaces without shining into the eyes. MultivoltTM electronics ensure consistent illumination across a range of input voltages and lamp protection for an ultra long service life. Lens Material UV and impact resistant plastic Rim Material
316 stainless steel
Cable
Pre-wired with 120mm of marine cable
Operating Voltage
Red MultivoltTM 8-28V DC
.
Blue, Green, White, Warm White MultivoltTM 10-33V DC
Power Consumption
0.5W ( < 0.04A@12V / < 0.02A@24V )
Degree of Protection
Completely Sealed
Mounting
Stainless steel screws included
Weight
35g (including cable)
Approvals
CE a c
a
Dimensions
Dimensions
c
bb
e
CLEAR LENS
dd
f
f
Rim Finish
CLEAR LENS
10-33V DC Polished stainless steel rim
2XT 959 680-841 2XT 959 680-851
Warm White Light LED Step Lamps Rim Finish
CLEAR LENS
10-33V DC Polished stainless steel rim
Part Number
2XT 959 680-411
10-33V DC Gold stainless steel rim
2XT 959 680-421
10-33V DC Satin stainless steel rim
2XT 959 680-431
Green Light LED Step Lamps Rim Finish
10-33V DC Polished stainless steel rim
CLEAR LENS
Part Number
10-33V DC Gold stainless steel rim
Voltage
Part Number
2XT 959 680-911
10-33V DC Gold stainless steel rim
2XT 959 680-921
10-33V DC Satin stainless steel rim
2XT 959 680-931
Blue Light LED Step Lamps Voltage
Rim Finish
10-33V DC Polished stainless steel rim
CLEAR LENS
Peak light is directed down at 30 degrees.
2XT 959 680-811
10-33V DC Satin stainless steel rim
Voltage
88
a = 84.0 mm / 3.31” 84.0 mm / 3.31” b = 29.0 29.0 mm / mm 1.14”/ 1.14” c58.7 = 58.7 mm / mm 2.31”/ 2.31” d = 44.0 44.0 mm / mm 1.73”/ 1.73” e = 16.0 16.0 mm / mm 0.63”/ 0.63” mm / mm 0.79”/ 0.79” f20.0 = 20.0
White Light LED Step Lamps Voltage
Packaging for aftermarket presentation
a= b= e c= d= e= f=
Part Number
2XT 959 680-611
10-33V DC Gold stainless steel rim
2XT 959 680-621
10-33V DC Satin stainless steel rim
2XT 959 680-631
Red Light LED Step Lamps Voltage
Rim Finish
Part Number
8-28V DC
Polished stainless steel rim
2XT 959 680-711
8-28V DC
Gold stainless steel rim
2XT 959 680-721
8-28V DC
Satin stainless steel rim
2XT 959 680-731
- Completely sealed housing - Pre-wired with marine cable
9510 Series Courtesy Lamps
Efficient, durable courtesy lighting for interior or exterior applications
Completely sealed and ultra durable, Hella marine LED courtesy lamps feature engineered optics to ensure an even spread of light without harsh point sources. Completely sealed Hella marine LED courtesy lamps are highly energy efficient. Available in Narrow Rim (22mm high) and Wide Rim (28mm high) sizes. Attractive trim accessories to fit Wide Rim lamps only are available in polished, satin or gold 316 stainless steel finishes. Lens Material
UV and impact resistant plastic
Cable
Pre-wired with 120mm of marine cable
Operating Voltage
12V or 24V DC
Power Consumption
0.5W ( < 0.04A@12V / < 0.02A@24V )
Degree of Protection
IP 67 - Completely Sealed
Mounting
Stainless steel screws included
Weight
20g (including cable)
Approvals
CE (MultivoltTM versions only)
Wide Rim LED Courtesy Lamps a a
Dimensions Dimensions
a
Dimensions
cc c b bb dd d
Packaging for aftermarket presentation
f f f
a =84.0 84.0 mm / 3.31” / 3.31” a =a = 84.0 mm / mm 3.31” b =29.0 29.0 mm / 1.14” / 1.14” b =b = 29.0 mm / mm 1.14” c =58.7 58.7 mm / 2.31” / 2.31”b b c =c =58.7 mm / mm 2.31” b e e e d =44.0 44.0 mm / 1.73” / 1.73” d =d = 44.0 mm / mm 1.73” e =e = 16.0 mm / mm 0.63” e =16.0 16.0 mm / 0.63” / 0.63” f =f =20.0 mm / mm 0.79” f =20.0 20.0 mm / 0.79” / 0.79”
Narrow Rim LED Courtesy Lamps a c
a a
Dimensions Dimensions
Dimensions
c c
e
d
d d
f
f f
a= b= e ec = d= e= f=
=a =79.0 79.0 mm mm / 3.11 / 3. 79.0amm / 3.11” =b =22.0 22.0 mm mm / 0.87 / 0. 22.0bmm / 0.87” =c =58.7 58.7 mm mm / 2.31 / 2. 58.7cmm / 2.31” =d =44.0 44.0 mm mm / 1.73 / 1. 44.0dmm / 1.73” 16.0emm / 0.63” =e =16.0 16.0 mm mm / 0.63 / 0. 20.0f mm / 0.79” =f =20.0 20.0 mm mm / 0.79 / 0.
White Light LED Courtesy Lamps
White Light LED Courtesy Lamps
Voltage
Lens Colour
Part Number
Voltage
Lens Colour
Part Number
10-33V
Clear
2XT 959 510-851
10-33V
Clear
2XT 959 510-451
Warm White Light LED Courtesy Lamps
Warm White Light LED Courtesy Lamps
Voltage
Lens Colour
Part Number
Voltage
Lens Colour
Part Number
10-33V
Clear
2XT 959 510-901
10-33V
Clear
2XT 959 510-931
Green Light LED Courtesy Lamps
Green Light LED Courtesy Lamps
Voltage
Lens Colour
Part Number
Voltage
Lens Colour
Part Number
10-33V
Clear
2XT 959 510-621
10-33V
Clear
2XT 959 510-151
Blue Light LED Courtesy Lamps
Blue Light LED Courtesy Lamps
Voltage
Lens Colour
Part Number
Voltage
Lens Colour
Part Number
10-33V
Clear
2XT 959 510-651
10-33V
Clear
2XT 959 510-251
Amber Light LED Courtesy Lamps
Amber Light LED Courtesy Lamps
Voltage
Lens Colour
Part Number
Voltage
Lens Colour
Part Number
12V
Amber
2XT 959 510-511
12V
Amber
2XT 959 510-011
Accessories to suit wide rim lamps
24V
Amber
2XT 959 510-561
24V
Amber
2XT 959 510-061
12V
Clear
2XT 959 510-501
12V
Clear
2XT 959 510-001
Polished 316 Stainless Steel Rim 9AR 998 019-001
24V
Clear
2XT 959 510-551
24V
Clear
2XT 959 510-051
Gold Plated 316 Stainless Steel Rim 9AR 998 019-011 Satin 316 Stainless Steel Rim 9AR 959 685-061
Red Light LED Courtesy Lamps
Red Light LED Courtesy Lamps
Voltage
Lens Colour
Part Number
Voltage
Lens Colour
Part Number
12V
Red
2XT 959 510-711
12V
Red
2XT 959 510-311
24V
Red
2XT 959 510-761
24V
Red
2XT 959 510-331
12V
Clear
2XT 959 510-701
12V
Clear
2XT 959 510-301
24V
Clear
2XT 959 510-751
24V
Clear
2XT 959 510-351
89
3606 Series Surface Mount Strip Lamps
Thin Light Strip Lamps
Low profile surface mount lighting for interior and exterior use
Unique surface mounting LED lighting for interior and exterior applications including storage lockers, under cabinetry, in cockpits, under gunnels. The lamp body is a shallow 10mm high and sealed. Thin Light LED lamps are highly resistant to vibration, saltwater and impact, with a current draw of less than 2W.
Material Description UV and impact resistant plastic Cable Pre-wired with 600mm of twin core cable Operating Voltage 12V or 24V DC Power Consumption
< 2.0W ( < 0.16A@12V / < 0.08A@24V )
Degree of Protection
IP 6K 9K
Weight
60g (including cable)
b
b
Dimensions Dimensions a a
Packaging for aftermarket presentation
90
CLEAR LENS
CLEAR LENS
c
c
White Light Thin Light LED Strip Lamps Voltage
End Cap Colour Part Number
12V DC
White 2JA 343 606-002
24V DC
White 2JA 343 606-012
Blue Light Thin Light LED Strip Lamps Voltage
End Cap Colour Part Number
12V DC
White 2JA 343 606-202
24V DC
White 2JA 343 606-212
280mm mm/ /11.02” 11.02” a a= =280 25.6mm mm/ /1.01” 1.01” b b= =25.6 10.0mm mm/ /0.39” 0.39” c c= = 10.0
9073 Series Recess Mount Strip Lamps
Attractive, energy efficient lighting for interior and exterior use
Hella marine flush mount LED strip lamps are suitable for a variety of exterior and interior applications including chart reading, lighting steps, and providing general ambient effects.
Material Description UV and impact resistant plastic Cable Pre-wired with 2.5m marine cable Operating Voltage 12V or 24V DC Power Consumption
< 2.0W ( < 0.16A@12V / < 0.08A@24V )
Weight
100g (including cable)
a
b
c
e
b
d
CLEAR LENS
CLEAR LENS
CLEAR LENS
d
CLEAR LENS
Dimensions Dimensions
a
c
f
f
e
a= b= c= d= e= f=
a = 265 mm 265 mm / b = 33.0 mm mmmm/ c33.0 = 237.5 d237.5 = 217mm mm / e216.5 = 20.0mm mm / f = 25.5 mm
20.0 mm 25.5 mm
/ 10.43” 10.43” / 1.30” /1.30” 9.35” /9.35” 8.54” /8.52” 0.79” / 1.00”
/ 0.79” / 1.00”
White Light LED Strip Lamps Voltage
Rim Type / Finish
Part Number
12V DC
Wide / No bezel
2641-12V
24V DC
Wide / No bezel
2641-24V
Warm White Light LED Strip Lamps Voltage
Rim Type / Finish
Part Number
12V DC 24V DC
Wide / No bezel Wide / No bezel
2JA 959 073-051 2JA 959 073-251
Blue Light LED Strip Lamps Voltage
Rim Type / Finish
Part Number
12V DC
Wide / No bezel
95907360
24V DC
Wide / No bezel
95907365
Red Light LED Strip Lamps Voltage
Rim Type / Finish
Part Number
12V DC
Wide / No bezel
95907370
24V DC
Wide / No bezel
95907375 91
LED Interior and Exterior Lighting 9630 Series Surface Mount Courtesy Lamps
Stylish, compact and completely sealed surface mounted LED courtesy lamps with MultivoltTM circuit technology for ultra low power consumption and an ultra long service life.
Material Description UV and impact resistant plastic Installation Pre-wired with 500mm of cable Operating Voltage Red, Amber - MultivoltTM 8-28V DC
Blue, White, Green - MultivoltTM 10-33V DC
Power Consumption
0.5W ( < 0.04A@12V / < 0.02A@24V )
Degree of Protection
Completely sealed
Weight
35g (including cable)
CLEAR LENS
CLEAR LENS
c
Dimensions c
a
White Light LED Courtesy Lamp
a= b= c= d=
b
Voltage
Shroud Colour
Part Number
10-33V DC
Black
2XT 959 630-451
Voltage
Shroud Colour
Part Number
10-33V DC
Black
2XT 959 630-551
/ / / /
2.36” 1.50” 1.26” 1.12”
d c
Green Light LED Courtesy Lamp
a
60.0 mm 38.0 b mm 32.0 mm 28.5 mm
d
Dimensions
a
a= b= c= d=
b
60.0 mm 38.0 mm 32.0 mm 28.5 mm
/ / / /
2.36” 1.50” 1.26” 1.12”
CLEAR LENS
d
Blue Light LED Courtesy Lamp
Accessories
Voltage
Shroud Colour
Part Number
10-33V DC
Black
2XT 959 630-251
White mounting shroud
CLEAR LENS
CLEAR LENS
9BG 959 565-017
- Completely sealed housing - Pre-wired with marine cable
Amber Light LED Courtesy Lamp
Blue mounting shroud
Voltage
Shroud Colour
Part Number
10-33V DC
Black
2XT 959 630-151
9BG 959 565-067
Red mounting shroud
Red Light LED Courtesy Lamp
9BG 959 565-037
Voltage
Shroud Colour
Part Number
8-28V DC
Black
2XT 959 630-351
8543 Series LED Livewell Lamp Completely sealed, power saving LED Livewell / Baitwell lamps are designed for installation into live bait tanks with wall thicknesses up to 26mm. Featuring a durable polycarbonate housing, the lamp provides soft amber light. Supplied with a plastic nut and rubber gaskets for a watertight installation. Housing Description
Heavy duty polycarbonate
Light Source
LED
b
c
a
d
Installation Pre-wired with 120mm of cable
Packaging for aftermarket presentation
CLEAR LENS
Operating Voltage 12V DC Power Consumption
0.5W ( < 0.04A@12V / < 0.02A@24V )
Degree of Protection
Completely sealed
Mounting
Single hole
Rubber gaskets included
Amber Light LED Livewell Lamp
d
b
a
Dimensions
c
a
Dimensions
c
Part Number
2JA 998 543-001
92
b
d
a= b= c= d=
50.0 mm 49.0 mm 40.0 mm 26.0 mm
/ / / /
1.97” 1.93” 1.57” 1.02”
a= b= c= d=
50.0 mm 49.0 mm 40.0 mm 26.0 mm
LED Interior and Exterior Lighting 3720 Series Chart Table Lamps
Hella marine LED lamps offer durable energy efficient lighting for a variety of interior applications including chart table and navigation area lighting, berth lighting and adjustable reading lights. With a current draw of less than 2W (less than 0.16A @ 12V), these flexible LED lamps have an impressive white or red light output and are highly energy efficient.
a a
Single colour - Coated steel arm
d d
UV and impact resistant plastic
Arm material
a a
Housing Description
c c
Available in single red or white LED light or dual colour red and white LED versions with integrated dimming via a rotary switch built into the head.
Dual colour red/white - 316 stainless steel arm MultivoltTM 9-31V DC
Power Consumption
< 2W ( < 0.16A@12V / < 0.08A@24V )
Degree of Protection
IP 53
Weight
150mm - 130g (including cable)
/ // // // // /
4.09” 4.09” 5.91” 5.91” 15.75” 15.75” 1.42” 1.42” 1.81” 1.81”
400mm - 230g (including cable) Approvals
CE
Dimensions a = 104mm b = 150mm 400mm c = 36mm d = 46mm
a
3720 Series Chart Table Candela and Lux performance. White light. 500
Dimensions a = 104mm ab == 104mm 150mm b = 150mm 400mm c = 400mm 36mm cd == 36mm 46mm d = 46mm
Pre-wired with 120mm of twin core cable
Operating Voltage
b b
Cable
d
/ / / / /
4.09” 5.91” 15.75” 1.42” 1.81”
Luminous Intensity - Distance / Lux
3720 Series Chart Table Lamp White Light Candela Output
b
450
400
c
40°
350
a 300
Dual colour LED chart table lamps feature a rotary dial for on/off red/white light control and dimming.
35
1m
250
70 Lux 715 mm
35
200
150
Intensity (cd)
100
50
−40°
−30°
−20°
−10°
0°
10°
20°
30°
−40°
2m
9
17.5 Lux 1430 mm
9
Packaging for aftermarket presentation
CLEAR LENS
CLEAR LENS
CLEAR LENS
Angle
White / Red Light Chart Table LED Lamps Shaft Length
Black Cover
6” / 150 mm
2JA 343 720-522
16” / 400 mm
2JA 343 720-622
White Light Chart Table LED Lamps Shaft Length
Black Cover
White Cover
6” / 150 mm
2JA 343 720-022
2JA 343 720-012
16” / 400 mm
2JA 343 720-122
2JA 343 720-112
Red Light Chart Table LED Lamps Shaft Length
Black Cover
White Cover
6” / 150 mm
2JA 343 720-052
2JA 343 720-042
16” / 400 mm
2JA 343 720-152
2JA 343 720-142 93
LED Interior and Exterior Lighting Spare Parts Round Lamp Rims Description
Part Number
Black Plastic Rim Soft Edge
9AB 959 505-202
Suits Series
White Plastic Rim Soft Edge
9AB 959 505-312
9596, 9599 (Rakino)
Polished 316 S/S Rim Soft Edge
9AB 959 505-502
3980 (SpotLED)
Gold Plated 316 S/S Rim Soft Edge
9AB 959 505-522
0500, 0501, 0502, 0503,
Satin Chrome Plated 316 S/S Rim Soft Edge
9AB 959 505-562
0507, 0508 (Round Slimline)
White Plastic Rim Square Edge
9AB 959 505-912
Polished 316 S/S Rim Square Edge
9AB 959 505-402
Round Courtesy Lamp Spacer Rings Description
Part Number
Black Plastic Spacer
8HG 959 993-102
White Plastic Spacer
8HG 959 993-112
Suits Series
0500, 0501, 0502, 0503, 0507, 0508. (Round Slimline)
Square Lamp Rims Description
Part Number
Black Plastic Rim
9AB 959 585-202
Suits Series
White Plastic Rim
9AB 959 585-312 9AB 959 585-012
0596, 0597 (Tiri)
Chrome Plated Plastic Rim Gold Plated Plastic Rim
9AB 959 585-022
Satin Chrome Plated 316 Stainless Steel Rim
9AB 959 585-032
0580, 0581, 0582, 0583, 0587, 0588 (Square Slimline)
Square Courtesy Lamp Spacer Rings Description
Part Number
Black Plastic Spacer
8HG 959 993-602
White Plastic Spacer
8HG 959 993-542
Chrome Plated Plastic Spacer
8HG 959 993-512
Gold Plated Plastic Spacer
8HG 959 993-522
Satin Chrome Plated Plastic Spacer
8HG 959 993-532
Suits Series
0500, 0501, 0502, 0503, 0507, 0508. (Square Slimline)
Easy Fit Step Lamp Caps Description
Part Number
Black Cap
9AB 994 554-032
White Cap
9AB 994 554-012
Suits Series
Chrome Plated Cap
9AB 994 554-002
8560 (Easy Fit Step)
Gold Plated Cap
9AB 994 554-022
Satin Chrome Plated Cap
9AB 994 554-062
Polished 316 Stainless Steel Cap (with screws)
9AR 994 554-211
Wide Rim Rectangular Courtesy Lamp Rims Description
Part Number
Polished 316 Stainless Steel Rim
9AR 998 019-001
Gold Plated 316 Stainless Steel Rim
9AR 998 019-011
Satin Chrome Plated 316 Stainless Steel Rim
9AR 959 685-061
Suits Series
9680 (Oblong Step) 9510 (Wide Rim Courtesy)
EuroLED® Accessories Description
Part Number
Black Nylon Shroud
9HD 959 027-002
White Nylon Shroud
9HD 959 027-012
Nylon Screw Boss (Pack of 2)
Suits Series
9950, 9951 (EuroLED® Touch)
9820 (EuroLED®) 9NH 959 028-012
EuroLED® Series Spacer Rings Description
Part Number
EuroLED Black Plastic Spacer
8HG 959 952-002
EuroLED® White Plastic Spacer
8HG 959 952-012
®
94
Suits Series
9950, 9951 (EuroLED® Touch) 9820 (EuroLED®)
Incandescent Interior Lighting
Incandescent interior lighting Fluorescent Lamps Transistorised Fluorescent Tube Lamps Modern, attractive and power saving fluorescent lights for a variety of interior applications. The combination of advanced electronics and efficient compact fluorescent tubes ensures lower power consumption than incandescent lamps for the same light output. Further benefits include: - Flicker free noiseless operation - Homogeneous spread of light - Vibration and shock resistance - Reliable ignition even at extremely low temperatures - Prevention of early blackening of the fluorescent tube - Reverse polarity protection - ON / OFF switch integrated into housing - Interference suppressed to VDE 0879
96
Housing Description
Impact resistant plastic
Light Source
TL8 Fluorescent tube included
Installation
6.3mm flat-plug connectors
35
60
Fluorescent Tube Interior Lamps
Light output comparison
Voltage / Wattage
Length
Part Number
12V / 7W
255mm
2642
24V / 7W
255mm
2642-24V
Compact 7W fluorescent tube produces light output equivalent to a 40W incandescent bulb.
Fluorescent Tube Interior Lamps
Light output comparison
Voltage / Wattage
Length
Part Number
12V / 11W
285mm
2643
24V / 11W
285mm
2643-24V
Compact 11W fluorescent tube produces light output equivalent to a 75W incandescent bulb.
Fluorescent Tube Interior Lamps
Light output comparison
Voltage / Wattage
Length
Part Number
12V / 8W
440mm
2644
24V / 8W
440mm
2644-24V
Compact 8W fluorescent tube produces light output equivalent to a 40W incandescent bulb.
7W Tube (2G7)
11W Tube (2G7)
8W Tube (TL8W)
Incandescent interior lighting Chart Reading Lamps
4532 Series Adjustable lamps for navigation areas. An ON/OFF switch is integrated into the lamp head. A red lens is included for optional 'non glaring' night illumination.
295 295
4646 4040
5050
295mm Fixed mounting
600
Housing Description
Plastic
Bulb
12V / 6W BA9s included
Installation
Pre-wired with 100mm of cable
Maximum Output
6W
600mm Fixed mounting
12V / 6W Bulb (HL126X)
4532 Series Halogen Interior Lamps Voltage
Arm Length Part Number
12V
296mm 2633
12V
600mm 2636
46 40
50
4532 Series Compact and functional mini halogen spot lamps for navigation areas, berths and applications where adjustable light is required. A red lens is included for optional 'non glaring' night illumination. An ON/OFF switch is integrated into the lamp head. Vertical and horizontal joint for rotating and pivoting.
70
58
Housing Description
Plastic
Bulb
12V / 6W BA9s included
Installation
Pre-wired with 100mm of cable
Maximum Output
5W
4532 Series Incandescent Interior Lamps Voltage
Housing Colour Part Number
12V
Black Housing 2637
12V
White Housing 2637W
12V / 6W Bulb (HL126X)
4813 Series Lamps for chart table lighting or general interior applications. Each lamp uses a polished aluminium reflector within a plastic housing and is switched ON and OFF by raising and lowering the lamp head. Vertical and horizontal joint for rotating and pivoting. 15
Housing Description
Plastic
Bulb
12V / 6W BA9s included
Installation
Pre-wired with 100mm of cable
Maximum Output
10W
35
36
45 85
32 78
Flush mount
Surface mount
4813 Series Halogen Interior Lamps Voltage
Mounting
12V
Flush Mount 2AB 004 813-071
Part Number
12V
Surface Mount 2AB 004 813-081
12V / 6W Bulb (HL126X)
97
Incandescent interior lighting General Interior / Exterior Lamps
8508 Series Water resistant flush mount halogen lamps suitable for interior or exterior installations. The reflector uses a 10W bulb. Bulbs up to 20W can also be used. Supplied with a silicon seal to prevent the glass lens from vibrating. Spring clip mounting. Housing Description
Solid brass housing
Stainless steel cover ring
Bulb
12V / 10W Halogen G4 included
Degree of Protection
IP 65
Installation
Pre-wired with 150mm of cable
Maximum Output
20W
Ø 62 33 Ø 80
12V / 10W Bulb (YM1210) 24V / 10W Bulb (YM2410)
8508 Series Halogen Interior / Exterior Lamps Voltage
Housing Colour
Part Number
12V
Chrome Housing
2JA 998 508-001
12V
White Housing
2791
8513 Series Water resistant marine lamps made from tough polycarbonate with a foam rubber gasket. Suitable for interior or exterior installations. Mounting screws included. Integrated ON / OFF switch. Housing Description
Impact resistant polycarbonate
Bulb
12V / 10W SV8.5 included
Installation
Pre-wired with 70mm of cable
Maximum Output
15W
Ø 125
8513 Series Halogen Interior / Exterior Lamps Voltage
Housing Colour
12V / 10W Bulb (K1210) 24V / 10W Bulb (K2410)
Part Number
12V
White Housing
2610M
12V
White Housing with Switch
2617M
37
Spart Part Clear Lens 2.9800.08
8565 Series Compact round fluorescent lamps offering energy efficiency and a long service life. MultivoltTM electronics provide over-voltage, reverse polarity protection and consistent light output across a range of input voltages from 10-30V DC. 7W fluorescent tube produces light output equivalent to a 40W incandescent bulb. Housing Description
Plastic lens and housing
Light Source
2G7 Fluorescent tube included
Installation
Pre-wired with 120mm of cable
Operating Voltage
10-30V DC
Nominal Power
7W
Power Consumption
12V, 650 mA, 24V 325 mA
Degree of Protection
IP 6K4
8565 Series Fluorescent Tube Interior / Exterior Lamps
98
Voltage
Housing Colour
12V
White Housing
Part Number
2645
12V
White Housing with Switch
2645SW
Ø 180
38
7W Tube (2G7)
Incandescent interior lighting Halogen Interior Lamps
6044 Series Surface mounted halogen lamps with high quality, heat resistant plastic housings. Lamp can be swivelled and turned in all directions. Integrated ON / OFF rocker switch.
Housing Description
Plastic
Bulb
Halogen G4 (Not included)
Installation
Pre-wired with 150mm of cable
Maximum Output
20W
6044 Series Halogen Interior Lamps Voltage
Housing Colour Part Number
12V
White Housing 2JA 006 044-001
12V
Black Housing 2JA 006 044-021
83
56
12V / 10W Bulb (YM1210) 24V / 10W Bulb (YM2410)
6046 Series
66
Halogen spot lamps with adjustable reflector. Attachment ring allows the lamp to be surface or flush mounted. Housing Description
Plastic
Bulb
Halogen G4 (Not included)
Installation
Pre-wired with 150mm of cable
Maximum Output
20W
6046 Series Halogen Interior Lamps Voltage
Housing Colour
Part Number
12V
White Housing
2JA 006 046-001
12V
Black Housing
2JA 006 046-021
29
12V / 10W Bulb (YM1210) 24V / 10W Bulb (YM2410)
6047 Series Halogen spot lamps. Attachment ring allows the lamp to be surface or flush mounted. 14mm installation depth. Housing Description
Plastic
Bulb
Halogen G4 (Not included)
Installation
Pre-wired with 150mm of cable
Maximum Output
10W
6047 Series Halogen Interior Lamps Voltage
Housing Colour
Part Number
12V
White Housing
2JA 006 047-001
12V
Black Housing
2JA 006 047-021
29 66
12V / 10W Bulb (YM1210) 24V / 10W Bulb (YM2410)
99
Incandescent interior lighting Halogen Interior Lamps 8516 Series Halogen spot lamps. Attachment ring allows the lamp to be surface or flush mounted. Can be installed without screws. 55mm mounting hole diameter. Ø 55 17
Housing Description
Plastic
Bulb
12V / 10W Halogen G4 included
Installation
Pre-wired with 120mm of cable
Maximum Output
10W
8516 Series Halogen Interior Lamps Voltage
Housing Colour
Part Number
12V
White Housing
2794
12V
Chrome Housing
2JA 998 516-011
12V
Brass Coloured Housing
2JA 998 516-021
Ø 66
12V / 10W Bulb (YM1210) 24V / 10W Bulb (YM2410)
8516 Series - Surface mount Surface mount halogen spot lamps. Fixed aluminium reflector. Includes attachment ring and mounting screws. Ø 68
Housing Description
Plastic
Bulb
12V / 10W Halogen G4 included
Installation
Pre-wired with 120mm of cable
Maximum Output
10W
8516 Series Halogen Interior Lamps Voltage
Housing Colour
Part Number
12V
White Housing
2JA 998 516-031
12V
Chrome Housing
2JA 998 516-041
12V
Brass Coloured Housing
2JA 998 516-051
22
12V / 10W Bulb (YM1210) 24V / 10W Bulb (YM2410)
8527 Series - With switch High performance halogen spot lamp with integrated switch. Switches ON and OFF by rotating the rim. Includes mounting screws.
Ø 65 14
Housing Description
Plastic
Bulb
12V / 10W Halogen G4 included
Installation
Pre-wired with 120mm of cable
Maximum Output
10W
8527 Series Halogen Interior Lamps
100
Voltage
Housing Colour
Part Number
12V
White Housing
2JA 998 527-001
12V
Chrome Housing
2JA 998 527-011
12V
Brass Coloured Housing
2JA 998 527-021
Ø 77
12V / 10W Bulb (YM1210) 24V / 10W Bulb (YM2410)
Incandescent interior lighting Reading Lamps 5759 Series
112
Surface mount halogen lamps with polished brass housings for a permanent protective finish. ON / OFF switch integrated into lamp head.
50
67
Surface mount lamp swivels 90°. Lamp can be rotated up to 356° Arm mounted lamp moves on a 200mm steel/brass arm. Includes brass mounting screws.
47
267 50
67
Housing Description
Solid brass
Bulb
Halogen G4 (Not included)
Installation
Pre-wired with 150mm of cable
Maximum Output
20W
47
5759 Series Halogen Interior Lamps Voltage
Housing Type
Mount type
Part Number
12V
Solid Brass Housing
Surface Mount
2JA 005 759-011
12V
Solid Brass Housing
Arm Mount
2JA 005 759-021
12V / 10W Bulb (YM1210) 24V / 10W Bulb (YM2410)
6886 Series
Housing Description
Solid brass
Bulb
Halogen G4 (Not included)
Installation
Pre-wired with 150mm of cable
Maximum Output
20W
°
90
Housing Type
Part Number
12V
Solid Brass Housing
2JA 006 886-001
138
12V / 10W Bulb (YM1210) 24V / 10W Bulb (YM2410)
6886 Series Halogen Interior Lamps Voltage
26
36
Universal halogen wall and ceiling lamp for direct and indirect lighting. Polished brass housings for a permanent protective finish. ON / OFF switch integrated into lamp base. Reflector can be swivelled 90° and rotated up to 360°.
0°
120 35
3681 Series Aluminium lamp with a lacquer finish for permanent protection. For 5W, 10W or 21W bulbs. ON/OFF switch integrated into lamp head. Lamp can be turned and pivoted in all directions. Housing Description
Aluminium
Bulb
BA15s (Not included)
Installation
Pre-wired with 120mm of cable
Maximum Output
21W
87 105
71
3681 Series Halogen Interior Lamps Voltage
Housing Type
12V Aluminium Housing
12V / 10W Bulb (G1210) 24V / 10W Bulb (G2410)
Part Number
2JA 003 681-001
3681 Series Solid brass lamp with a lacquer finish for permanent protection. For 5W, 10W or 21W bulbs. ON/OFF switch integrated into lamp head. Lamp can be turned and pivoted in all directions. Housing Description
Solid Brass
Bulb
BA15s (Not included)
Installation
Pre-wired with 120mm of cable
Maximum Output
21W
3681 Series Halogen Interior Lamps Voltage
Housing Type
Part Number
12V
Solid Brass Housing
2JA 003 681-031
87 105
71
12V / 10W Bulb (G1210) 24V / 10W Bulb (G2410)
101
Incandescent interior lighting General Lamps
4192 Series
29
100
Ideal berth or chart reading lamps. Shutter tilts to switch lamp ON and OFF. Adjustable light opening.
Housing Description
Plastic
Bulb
10W SV8.5 (Not included)
Installation
2 flat plug connectors 6.3mm
Maximum Output
10W
49
12V / 5W Bulb (L125) 24V / 5W Bulb (L245)
4192 Series Incandescent Interior Lamps Voltage
Housing Colour
Lens Colour
Part Number
12V
White Housing
Clear
2JA 004 192-071
12V
Black Housing
Clear
2JA 004 192-001
12V
White Housing
Red
2JA 004 192-081
12V
Black Housing
Red
2JA 004 192-041 165 35
1330 Series Surface mounted interior lamps with 2 x 5W bulbs. Suitable for narrow mounting surfaces. Lens milky-white. ON/OFF switch.
Housing Description
Plastic
Bulb
2 x 5W SV8.5 (Not included)
Installation
Screw terminals
Maximum Output
2 x 5W
1330 Series Incandescent Interior Lamps Housing Colour
Part Number
Ivory Housing
2608
Chrome Housing
2JA 001 330-012
3231 Series
35
25
12V / 5W Bulb (L125) 24V / 5W Bulb (L245)
103
Universal interior lamps for surface mounting. Lens rotates to switch lamp ON and OFF. Can also be operated by remote switch. Housing Description
Plastic
Bulb
10W or 15W SV8.5 (Not included)
Installation
3 flat plug connectors 6.3mm
Maximum Output
15W
3231 Series Incandescent Interior Lamps
102
Housing Colour
Part Number
Clear Housing
2JA 003 231-002
Brass Housing
2JA 003 231-022
Chrome Housing
2605
25
165
12V / 10W Bulb (K1210) 24V / 10W Bulb (K2410)
29
Underwater Lights
Underwater Lights Introduction
High performance and ultra durable underwater lighting systems
Sea Vision products are designed and manufactured by Underwater Lights USA, a market leading specialist supplier of underwater and exterior lighting systems to the worldâ&#x20AC;&#x2122;s super yacht industry. Purpose designed for permanent submersion below the waterline, Hella marine Sea Vision lights provide class leading luminous intensity and attractive ambient colours, whether the goal be attracting bait fish or enhancing a vessel in a pool of light whilst at anchor. Featuring precision machined marine bronze housings, thick Borofloat glass lenses and sound light engineering, Hella marine Sea Vision lights are thoroughly proven worldwide to provide reliable installations and breathtakingly beautiful illumination. A key component of the range, Borofloat glass offers excellent clarity and durability under extreme pressure and heat. For durable permanently submerged fittings on a hull, marine bronze is a sound choice. The bronze used for Hella marine Sea Vision lamps can withstand substantial temperature and pressure changes, high pressure cleaning, scraping and scrubbing and anti-fouling coatings in a conclusively more resistant manner than polymer based materials.
104
The range offers three light technologies of LED, Xenon Gas Discharge (HID) and Halogen. For sheer power and performance, Xenon lamps provide the highest luminous intensity. The top of the range 50W Xenon lamp features an integrated ballast while the 35W Xenon lamp features a remote Hella ballast. Five energy efficient LED based product lines are also available, each in blue or white light, surface mounting or thru hull mounting. Ideal for smaller vessels and power conscious operators, Hella marine Sea Vision LED underwater lights provide powerful illumination with efficiency. All products are CE approved plus the Halogen and Xenon HID versions carry ABS and ISO Ignition Protection approvals for safe and certified installations when lights are located near flammable gas sources such as machinery spaces, tender garages and fuel storage areas. All Hella marine Sea Vision lights carry a 2 year manufacturers warranty.
Underwater Lights Technical Information
Key points Borofloat glass offers outstanding clarity and can handle extreme pressure and heat. The lens will not blacken or crack.
The bronze exterior surfaces of the lamps may be anti-fouled in a similar fashion to other bronze underwater fittings.
The bronze used for the housing component is aluminium bronze AB2.
A clear anti-fouling may be applied to the glass lens. A soft brush is recommended for cleaning the glass lens to prevent scratching.
Lamps must be installed below the waterline. Installation instructions recommend ideal installation depths for each lamp. The back surface of all lamps is completely sealed and will provide a watertight installation when properly installed. The lamp body must be secured and sealed with 3M 5200 marine adhesive or an equivalent product. The bronze body of the lamp must be electrically bonded to the vessels grounding and cathodic protection system. Failure to do so may cause corrosion by electrolysis.
Xenon Gas Discharge (HID) Technology HID underwater lights differ from traditional bulb versions in that, instead of light being created by passing current through a filament to make it glow, light is created by an arc in a tube filled with a mixture of xenon gas and metal salts. The light arc is shock proof as there is no filament to break. A 12V or 24V DC electronic ballast, housed remotely or integrated into unit, is used to ignite the HID bulb and provide constant levels of light output, even if the vessel’s voltage supply fluctuates by up to 10%.
The light pattern can range from approximately 3m to 30m / 10ft to 100ft depending on the model used and water clarity. The lamps may be operated when the vessel is out of the water, however it is recommended this operation occurs only for short periods of time. The lamps may be left on when the boat is running at speed. The bulbs of HID and Halogen lamps may be replaced from inside the vessel. LED lamps are completely sealed non-servicable units.
The advantages of using Xenon Gas Discharge (HID) underwater lights include: • Increased luminance results in a brighter and larger illumination of underwater area. • Vibration resistant light arc instead of a fragile filament. • Service life up to five times longer – reduced expenditure for bulb replacement. • Constant brightness – independent of fluctuations of up to 10% in the supply voltage. • Only 42W or 50W power consumption – less strain on a vessel's power supply.
105
Underwater Lights LED Technology 0750 and 0751 Series Lens Material
Convex Borofloat glass. 13mm (0.51”)
Housing Material
Marine bronze
Light Source
LED
Light Output
400+ Lumens
Operating Voltage
12V DC - Reverse polarity protected
Power Consumption
<5W ( < 0.42A @ 12V )
Degree of Protection
IP 67 - Completely sealed
Weight
Surface Mount
680g / 1.5 lbs
Thru Hull
910g / 2.0 lbs
Cable
Pre-wired with 2.0m of twin core marine cable
Recommended Positioning
At least 5-6” (125-150mm) below waterline between 3-6ft (1-2 meters) apart
Suitable hull materials
GRP / fiberglass / wood
Approvals
CE
0750 Series - Surface Mount LED Compact surface mount LED underwater light Heavy duty marine bronze housing Thick Borofloat glass lens Integrated electronics sealed inside the light
b
a
b
a
a
Dimensions: Dimensions: a = 75.0mm / 2.95” a = 75.0mm b = 29.0mm / 1.14”
/ 2.95” b = 29.0mm / 1.14”
a
Surface Mount Underwater Lights - LED Light Colour
Voltage
Blue
12V DC
Part Number
2LT 980 750-001
White
12V DC
2LT 980 750-101
0751 Series - Thur Hull LED Heavy duty marine bronze housing Thick Borofloat glass lens Integrated electronics sealed inside the light
a
a
a
b
c
a
Dimensions: a = 60.0mm b = 168mm c = 19.0mm d = 43.0mm
/ 2.36” / 6.61” 0.75” / 1.69”
Thru Hull Underwater Lights - LED/
106
b
Light Colour
Voltage
Blue
12V DC
Part Number
2LT 980 751-001
White
12V DC
2LT 980 751-101
d
Dimensions: a = 60.0mm b = 168mm c = 19.0mm d = 43.0mm
/ / / /
2.36” 6.61” 0.75” 1.69”
Underwater Lights LED Technology
0752 and 0753 Series Lens Material
Convex Borofloat glass. 23.5mm (0.93”) x 57mm (2.2”)
Housing Material
Marine bronze
Light Source
LED
Light Output
1000+ Lumens
Operating Voltage
10-30V DC - Reverse polarity protected
Power Consumption
<18W ( < 1.5A @ 12V / < 0.75A @ 24V )
Degree of Protection
IP 67 - Completely sealed a
Weight
Surface Mount
1400g / 3 lbs
Installation type
Thru Hull
1800g / 4 lbs
Cable
Pre-wired with 2.0m of twin core marine cable
Recommended positioning
At least 5-6” (125-150mm) below waterline
b
c
a between 3-6ft (1-2 meters) apart. Suitable hull materials
GRP / fiberglass / wood
Approvals
CE
d
0752 Series - Surface Mount LED
e
Heavy duty marine bronze housing Thick Borofloat glasselens Remote electronics housed in sealed module a
f
b
Dimensions: a = 100.0mm b = 46.5mm c = 57mm d = 137mm e = 65mm f = 55mm
c a
Light Colour
Voltage
Blue
10-30V DC
f 2LT 980 752-001
White
10-30V DC
2LT 980 752-101
Dimensions: a = 100.0mm b = 46.5mm c = 57mm d = 137mm e = 65mm f = 55mm
/ / / / / /
3.94” 1.83” 2.24” 5.39” 2.56” 2.17”
e
a
d
Surface Mount Underwater Lights - LEDe e
/ / / / / /
b
Part Number
a
3.94” 1.83” 2.24” 5.39” 2.56” 2.17”
g
0753 Series - Thru Hull LED
d
h
e
Heavy duty marine bronze housing Thick Borofloat glass lens e Remote electronics housed in sealed module
f
e a
b
a
g
c
d
Thru Hull Underwater Lights - LED
h
Voltage
Part Number
Blue
10-30V DC
2LT 980 753-001
White
10-30V DC
2LT 980 753-101
/ / / / / / / /
3.15” 7.36” 0.75” 1.69” 2.24” 2.17” 5.39” 2.56”
/ / / / / / / /
3.15” 7.36” 0.75” 1.69” 2.24” 2.17” 5.39” 2.56”
e
Light Colour e
Dimensions: a = 80.0mm b = 187.0mm c = 19.0mm d = 43.0mm e = 57.0mm f = 55.0mm g = 137.0mm h = 65.0mm
d
Dimensions: a = 80.0mm b = 187.0mm c = 19.0mm d = 43.0mm e = 57.0mm f = 55.0mm g = 137.0mm h = 65.0mm
f
107
Underwater Lights LED Technology
0754 Series - Surface Mount LED Heavy duty underwater thermally conductive housing Thick Borofloat glass lens Blue or white light versions
Lens Material
Convex Borofloat glass. 9.5mm (0.93”)
Housing Material
Nylon and Thermoplastic
Dimensions
L 164mm (7.79”) x H
Light Source
LED
Light Output
1000+ Lumens
Operating Voltage
10-28V DC - Reverse polarity protected
Power Consumption
<18W ( < 1.5A @ 12V / < 0.75A @ 24V )
Degree of Protection
IP 67 - Completely sealed
Weight
590g / 1.3 lbs
Installation type
Surface mount
Cable
a Pre-wired with 2.0m of twin core marine cable
Recommended positioning
At least 5-6” (125-150mm) below waterline between 3-6ft (1-2 meters) apart
Suitable hull materials
GRP / fiberglass / wood
Approvals
CE
a
c
d
c
Dimensions: a = 164.0mm b = 75.8mm c = 6.0mm d = 29.0mm
d
b
b
/ / / /
6.46” 2.98” 0.24” 1.14”
Surface Mount Underwater Lights - LED
108
44mm (1.73”) x D 29mm (1.14”)
Light Colour
Voltage
Blue
10-28V DC
Part Number
2LT 980 754-001
White
10-28V DC
2LT 980 754-101
Dimensions: a = 164.0mm b = 75.8mm c = 6.0mm d = 29.0mm
/ / / /
6.46” 2.98” 0.24” 1.14”
Underwater Lights Xenon (HID) Technology
0755 Series - Thru Hull 35W Xenon Heavy duty marine bronze housing Thick Borofloat glass lens Remote ballast HID bulb can be changed from inside the vessel
b
a
c
a
Lens material
Borofloat glass. 9.5mm (0.38”)
Housing material
Marine bronze
Dimensions: a = 80.0mm / 3.15” Light Source b = 130.6mm / 5.14“ c = 60.0mm / 2.36” Output dLight = 40.0mm / 1.57”
35W HID Xenon 3000+ lumens
Operating Voltage
12V DC or 24V DC
Operating Power Consumption <42W (<3.5A @ 12V or <1.75A @ 24V)
d
b
b
a
c
Dimensions: a = 80.0mm b = 130.6mm a c = 60.0mm d = 40.0mm
Start up Power Consumption
12V up to 18A, 24V up to 8A
Degree of Protection
IP 67 - Completely sealed
Weight / / / /
3.15” 5.14“ 2.36” 1.57”
Dimensions: a = 80.0mm b = 130.6mm c = 60.0mm d = 40.0mm
Installation type c
d
Replacement Bulb Type D2S 35W Xenon Bulb Spare Parts 9.1534.03 12V Ballast 9.1535.03 24V Ballast
1900g / 4.2lbs / / / /
3.15” 5.14“ 2.36” 1.57”
Thru hull. 60mm (2.36”) cut out hole Ballast has 425mm (17”) cable. This cable cannot be spliced into
Recommended positioning
At least 6” (152mm) below waterline between 3-6ft (1-2 meters) apart
Suitable hull materials
GRP / fiberglass / wood
Approvals
CE, ABS, Ignition Protection
Thru Hull Underwater Lights - 35W Xenon HID Light Colour
Voltage
White
12V DC
Part Number
2LT 980 755-001
White
24V DC
2LT 980 755-101
0757 Series - Thru Hull 50W Xenon Heavy duty marine bronze housing Thick Borofloat glass lens Integrated ballast HID bulb can be changed from inside the vessel
a
a
b
b b
Borofloat glass. 12.7mm (0.5”)
Lens Material
Marine bronze
Housing Material
50W HID Xenon
Light Source a a
c c
a
4250+ Lumens
Light Output
c12V DC or 24V DC
Operating Voltage
Operating Power Consumption <60W (<5A @ 12V or <2.5A @ 24V) 12V up to 8A, 24V up to 5A Start up Power Consumption Dimensions: Dimensions: a a = 105mm a = 105mm/ 4.13” / 4.13” b =b 189mm = 189mm/ 7.44“ / 7.44“ c = c80.0mm = 80.0mm / 3.15” / 3.15”
b
Degree of Protection Weight
Dimensions: a = 105mm / 4.13” a b = 189mm / 7.44“ c = 80.0mm / 3.15”
9.19015 50W Xenon Bulb Spare Parts 9.19041 9.19067
12V 50W Ballast 24V 50W Ballast
IP 67 - Completely sealed 1900g / 4.2lbs
Thru hull. 80mm (3.15”) cut out hole
Installation type Recommended positioning
At least 10” (250mm) below waterline between 3-6ft (1-2 meters) apart
Suitable hull materials
CE, ABS, Ignition Protection
c
Approvals Dimensions: a = 105mm / 4.13” b = 189mm / 7.44“ c = 80.0mm / 3.15”
Replacement Bulb Type -
GRP / fiberglass / wood USA
Thru Hull Underwater Lights - 50W Xenon HID Light Colour
Voltage
White
12V DC
Part Number
2LT 980 757-001
White
24V DC
2LT 980 757-101 109
Underwater Lights Halogen Technology
0756 Series - Thru Hull Halogen 85W 12V or 70W 24V Halogen light Heavy duty marine bronze housing Thick Borofloat glass lens Bulb can be changed from inside the vessel
Lens Material
Borofloat glass. 9.5mm (0.38”)
Housing Material
Marine bronze
Light Source
85W / 12V halogen bulb or 70W / 24V halogen bulb
Light Output
3400 / 2800 + lumens
Operating Voltage
12V DC or 24V DC
Power Consumption
85W (<7A @ 12V) or 70W (<3A @ 24V)
Degree of Protection
IP 67 - Completely sealed
Weight
700g / 1.54lbs
Installation type
Thru hull. 60mm (2.36”) cut out hole
Recommended positioning
At least 6” (152mm) below waterline between 3-6ft (1-2 meters) apart
Suitable hull materials
GRP / fiberglass / wood
Approvals
CE, ABS, Ignition Protection
a
b
a
Dimensions: a = 80.0mm / 3.15” b = 128.0mm / 5.04” Dimensions: c = 60.0mm / 2.36” a = 80.0mm d = 40.0mm / 1.57” b = 128.0mm e = 89.0mm / 3.50” f = 78.00mm / 3.07” c = 60.0mm g = 35.0mm / 1.38”
b a
/ / / d = 40.0mm / e = 89.0mm / f = 78.00mm / g = 35.0mm /
c
a
c
d e
d Hull Underwater Lights - Halogen Thru f
f
e Light Colour
Voltage
Part Number
White
12V DC
2LT 980 756-001
White
24V DC
2LT 980 756-101
f
g
f g
110
Replacement Bulb Type -
3.15” 5.04” 2.36” 1.57” 3.50” 3.07” 1.38”
12V / 85W (9.16026) 24V / 70W (9.16013)
Trailer Products
111
Trailer Products Submersible LED Trailer Lamps
Advanced Hella marine LED trailer lamps are the highly visible, maintenance free solution for reliable and safe boat trailer lighting. Designed and manufactured in New Zealand, each is a completely sealed, maintenance free unit. They are also shock, vibration, UV and corrosion resistant and represent true ‘fit and forget’ technology. MultivoltTM electronics reduce the effect of voltage drop, ensuring ongoing safety. This means Hella LED lamps perform at full brightness across a range of voltages unaffected by voltage drop that can dull bulb lamps due to long cable runs, joins, terminals and plugs in a boat trailer’s wiring.
Submersible LED Trailer Lamps
2379 Series LED Combination Lamps Mounting
Designed to be mounted horizontally
Operating Voltage
MultivoltTM 8-28V DC
Power Consumption
Rear position 1W, Indicator 5W, Stop 5W
Voltage Protection
Spike, Over Voltage and Reverse Polarity
Cable
Pre-wired with 6m of cable
Approvals
ADR compliant
c
a
c
a
d
Description
Part Number
Rear Position / Stop / Indicator Lamp
2379
d
Dimensions a = 220mm / 8.66” b = 96mm / 3.78” Dimensions = 31mm / 1.22” a =cd 220mm / 8.66” = 193mm / 7.60”
2379 lamps feature an Ultra Wide Visibility Optic, significantly improving side visibility. Hella’s use of ultra wide visibility optics exceeds the minimum ECE/ADR requirements and provides following vehicles with higher light intensity and recognition as trailers turn on curves and corners. 2379 LED Submersible Rear Combination Lamp
b
b
b = 96mm / 3.78” c = 31mm / 1.22” d = 193mm / 7.60”
ADR
COMPLIANT
ADR
2379 LED Trailer Lighting Pack Description
Part Number
2 x 2379 Combination Lamps
2379-TP
COMPLIANT
1 x 2559 Number Plate Lamp 2 x 2920 Red Reflex Reflectors 1 x 4921 7 Pole Flat Trailer Plug
2399 Series LED Combination Lamps Mounting
Single Bolt, optional Red Reflex Reflector Base
Operating Voltage
Dualvolt 12-24V DC
Power Consumption
Rear position 1W, Indicator 3W, Stop 3W
Voltage Protection
Spike, Over Voltage and Reverse Polarity
Cable
Pre-wired with 2.5m of cable
Approvals
ADR compliant
Optional 4mm Ø location pin (removable)
83 74
2399 LED Submersible Rear Combination Lamp Description
Part Number
Single Rear Position / Stop / Indicator Lamp
2399BL
Pair of Rear Position / Stop / Indicator Lamps
2399
ADR
COMPLIANT
19.5
bolt 1/4" unc
Cable Exit 11.5
22 21 33
145 TOP
Red reflector Vertical Mount Base
2394-V
TOP
2394-H
5651
Part Number
Red Reflector Horizontal Mount Base
Lamp mounting point
ADR
2399 LED Trailer Lighting Pack
Part Number
2 x 2399 Combination Lamps
2399-TP
2 x 2934H Reflector Base Horizontal 112
COMPLIANT
Description
1 x 2559 Number Plate Lamp 1 x 4921 7 Pole Flat Trailer Plug
41
25.5
Reflector Bases to suit 2399 lamps Description
10
90
Trailer Products Submersible LED Trailer Lamps 394 and 2395 series lamps feature a modern clear lens with black mounting base. 2 The full combination of functions are offered including LED stop, rear position and rear indicator lamps, number plate illumination plus and an integrated 18cm² red retro reflector. Low power consumption and long life equates to economical running costs. The mounting base has multiple fixing points and allows time saving and convenient installations onto most boat trailers. Each lamp is completely sealed against dust and moisture ingress. Optic appears clear until illuminated.
2394 & 2395 Series LED Combination Lamps Horizontal or vertical
Operating Voltage
Suitable for 12 volt and 24 volt systems
Power Consumption
Rear position 1W, Indicator 2W, Stop 2W
Voltage Protection
Spike, Over Voltage and Reverse Polarity
Cable
2394 pre-wired with 0.5m or 6.0m
96
Mounting
2395 pre-wired with 0.5m or 6.0m Approvals
ADR compliant
80
Part Number 2394
Part Number 2395
- Rear Position
- Rear Position
- Stop
- Stop
- Indicator
- Indicator
26
- Number Plate
Mounting bracket Spare Part 9.2394.09
- Rear Position
- Indicator
- Stop
- Number Plate (2395 only)
ADR
LED Submersible Rear Combination Lamps
COMPLIANT
Description
Cable Length
Part Number
1 x Rear Position / Stop / Indicator
0.5m
2394
18 x Rear Position / Stop / Indicator
0.5m
2394BULK
1 x Rear Position / Stop / Indicator
6.0m
2394-6M
10 x Rear Position / Stop / Indicator
6.0m
2394-6MBULK
12 x Rear Position / Stop / Indicator
9.0m
2394-9MBULK
Description
Cable Length
Part Number
1 x Rear Position / Stop / Indicator / Number Plate
0.5m
2395
18 x Rear Position / Stop / Indicator / Number Plate.
0.5m
2395BULK 2395-6M
1 x Rear Position / Stop / Indicator / Number Plate
6.0m
10 x Rear Position / Stop / Indicator / Number Plate
6.0m
2395-6MBULK
12 x Rear Position / Stop / Indicator / Number Plate
9.0m
2395-9MBULK
ADR
LED Trailer Lighting Pack
COMPLIANT
Description
Cable Length
Part Number
1 x 2394 Rear Position / Stop / Indicator
0.5m
2395-TP
1 x 2395 Rear Position / Stop / Indicator / Number Plate 0.5m
113
Trailer Products Submersible LED Trailer Lamps
ADR
DuraLed Front End Outline Lamp
COMPLIANT
Product Description
Amber Front End Outline (FEOL) LED
Operating Voltage
MultivoltTM 8-28V DC
Installation
Pre-wired with 500mm of cable.
Bulk packs pre-wired with 2.5m or 5.0m of cable
Pack Size and Description
Part Number
Single Pack (500mm of cable)
2051
Pack of 4 (2.5m of cable)
2051BULK
32
60
38 28.5
ADR
DuraLed Side Marker Lamp
COMPLIANT
Product Description
Red / Amber Side Marker LED Lamp
Operating Voltage
MultivoltTM 8-28V DC
Installation
Pre-wired with 500mm of cable.
Bulk pack pre-wired with 2.5m of cable
32
Super Seal version has 150mm of cable terminated
with a Super Seal Connector
60
38 28.5
Pack Size and Description
Part Number
Single Pack (500mm of cable)
2053
Pack of 4 (2.5m of cable / no SS)
2053BULK
Delphi connector and pigtail loom (2.5m of cable) 2053SBULK
ADR
DuraLed Front Position / End Outline Lamp
COMPLIANT
Product Description
White Front End Outline (FEOL) LED
Operating Voltage
MultivoltTM 10-33V DC
Installation
Pre-wired with 500mm of cable.
Bulk pack pre-wired with 2.5m of cable
ECE Compliance
E4 02 7575
32
60
38 28.5
Pack Size and Description
Part Number
Single Pack (500mm of cable)
2054
Pack of 4 (2.5m of cable)
2054BULK
ADR
LED Number Plate Lamp
COMPLIANT
Voltage
LED MultivoltTM 10-33V DC
Cable
Pre-wired with 2.5m of cable
Pack Size and Description
Part Number
LED Number Plate Lamp
2559
Pack of 8 with mounting spacer
2559BULK
70 20
78
85
36
85
20
5.8 to suit M5 or 1/4”
Ø
No. Lamp Function
16
17
114
License Plate Lamps
3
Rear Direction Indicator Lamps ADR 6/00 Cat.2
ADR 48/00
4
Rear Position Lamps
ADR 49/00
9
8
9
5
Stop Lamps
ADR 49/00
9
8
9
6
Rear Reflex Reflectors
ADR 47/00
7
Reversing Lamps
ADR 1/00
2
8
Side Reflex Reflectors
ADR 47/00
2 3, 4, 5, 6, 7
9
Side Marker Lamps
ADR 45/01 or ADR 74/00
C o m b in e d
16
Front Position Lamps
ADR 49/00
17
Front Reflex Reflectors
ADR 47/00
Combined r s in g le 3,o4, 5, 6, lalamps m p7 s or single C o m b in e d o r s in g le la m p s
6 16 17
2
26 2
Trailer Products Trailer Plugs and Sockets
7 Pole Plastic Plug Maximum Load
20A @ 12V 10A @ 24V
7 Pole Plastic Plug Pack Size
Part Number
Single Pack
4902
7 Pole Plastic Socket Maximum Load
20A @ 12V 10A @ 24V
7 Pole Plastic Socket Pack Size
Part Number
Single Pack
4912
7 Pole Metal Plug Maximum Load
20A @ 12V 10A @ 24V
7 Pole Metal Plug Pack Size
Part Number
Single Pack
4911
Pack of 25
4911BULK
7 Pole Metal Socket Maximum Load
20A @ 12V 10A @ 24V
7 Pole Metal Socket Pack Size
Part Number
Single Pack
4901
Pack of 25
4901BULK
7 Pole Flat Socket Impact resistant, UV stabilised, plastic, spring loaded lid. Nickel contacts for excellent electrical performance. Maximum Load
20A @ 12V 10A @ 24V
7 Pole Flat Socket Pack Size
Part Number
Single Pack
4920
7 Pole Flat Plug Impact resistant, UV stabilised, plastic, spring loaded lid. Nickel contacts for excellent electrical performance. Maximum Load
20A @ 12V 10A @ 24V
7 Pole Flat Plug Pack Size
Part Number
Single Pack
4921 115
Trailer Products Trailer Plugs and Sockets
Trailer Plug Holder Minimises potential damage to plug Mounting
Screw mounting on trailer drawbar or any convenient location.
Trailer Plug Holder Pack Size
Part Number
Single Pack
8000
Flat Plug Holder Flat plug holder to suit 7 Pole Flat Plug (Part Number 4921)
Flat Plug Holder Pack Size
Part Number
Single Pack
8009
Pack of 20
8009BULK
Trailer Socket Bracket Zinc steel. Eliminates the need to drill vehicle.
Trailer Socket Bracket Pack Size
Part Number
Single Pack
8022
7 Pole Connector Wiring Specification
Terminal No. 1
Connect to
Colour
Left flasher lamps
Yellow
2
Reversing lamps
Black
3
Earth
White
4
Right flasher lamps
Green
5
Service brakes (auxiliary) *
6
Stop lamps
7
Tail, licence plate and clearance lamps
Blue
116
3
1 7 4
6
6
5
5
1 7 4
2 3
Red Brown
Note: I f a separate earth cable is not used on the vehicle, the earthing strip supplied should be fitted into pin 3 of socket and under mounting screw * Where service brakes are not fitted, terminal No. 5 may be used for auxiliaries.
2
7 PoleSocket Socket 7 Pole
7 PolePlug Plug 7 Pole
Accessories
Accessories Fans
3361 Series 2 Speed "Turbo” Fans Universal fans from the versatile and well respected “Turbo” range. Can be turned and pivoted in all directions, and locked in position. - Quality German motor provides very quiet operation - 150mm diameter fan blade with guard - High air moving capacity with low power consumption - Two speed switch in front of the blade guard - Side, upright or pendant mounting
Material Description
Impact resistant plastic
Switch
Integrated 2 stage rotary
Output
Speed 1: 70 litre / sec.
.
195
Speed 2: 95 litre / sec.
Power Consumption
6.5W
Installation
Pre-wired with 140mm of cable
95
188
3361 Series "Turbo" Fans Voltage
Housing Colour
Part Number
12V
Black Housing
6100
12V
White Housing
6100-W
24V
Black Housing
6101
Single Speed “Jet” Fan Economy fan with similar styling to the popular “Turbo” models. Can be turned and pivoted in all directions, and locked in position. - 130mm diameter fan blade with guard. - Switch in front of the blade guard. - Side, upright or pendant mounting. 155
Material Description
Impact resistant plastic
Switch
ON/OFF switch
Output
40 litres / sec.
Power Consumption
3.5W
Installation
Pre-wired with 140mm of cable
Fan "Jet"
118
Voltage
Housing Colour
Part Number
12V
Black Housing
6102
80
205
Accessories Light Dimmer
8572 Series - 2 Group Light Dimmer Features: - Precise dimming control for 1 or 2 light groups - Voltage regulation & ‘soft-start’ bulb protection - Low voltage battery protection - 12V and 24V DC The Hella marine 2 Group Light Dimmer provides precise dimming control for one or two separate light groups, and sophisticated voltage regulation with a ‘soft-start’ feature to lengthen the life of a filament bulbs. The dimmer also provides low voltage protection against deep battery discharge. When batteries are charged voltage can rise to 14.4V on 12V systems or 28.8V on 24V systems, this can shorten the life of bulbs. The 2 Group Dimmer increases bulb life through sophisticated internal voltage regulation, ensuring the lighting circuit voltage does not rise above 12V or 24V. As halogen bulbs also have a high inrush current on start up, the 2 Group Dimmer features ‘soft-start’ to further lengthen bulb life. The dimmers low voltage protection also protects against deep battery discharge. Lights will turn off automatically when battery voltage is lower than 9V on a 12V system or lower than 18V on a 24V system. Lights can be switched on again when the battery is charged and reaches 12V or 24V respectively. 99
Max. Load
200W at 12V and 400W at 24V
Max. Load Per group
100W at 12V and 200W at 24V
Input Voltage Range
8 - 30V DC
System Voltage
12V or 24V 89 DC
Number of Groups
2
Switches Per Group
Unlimited
Switch Type
Momentary normally open
Weight
140 grams
Protections
Overload, Temperature, Low voltage
Fuse
2 x 10A
41
99
41
89
2 Group Light Dimmer Part Number
5XA 998 572-001
Voltage Sensitive Relay - “Dual battery charging made easy” The Voltage Sensitive Relay (VSR) allows two batteries to be charged at the same time. When the engine is started and the start battery reaches 13.7 volts, the VSR engages, allowing two battery banks (start and auxiliary) to be charged simultaneously. When the voltage drops below 12.8 volts (eg the engine is stopped), the VSR disengages, separating the batteries. This system eliminates the possibility of draining the start battery and protects sensitive electronic equipment powered from the auxiliary battery from harmful engine start up spikes. Housing Description .
Impact resistant plastic Tin copper studs and nuts
Termination Stud Size
2 x 6mm (1/4")
Degree of Protection
IP 56
Voltage
12V DC
Max. Load 12 DC 140 Amps Dimensions
16.61
69 x 69 x 50mm (W x D x H)
8.61
68
51 Ø5.20
68
45
68
Voltage Sensitive Relay Part Number
3099 119
Accessories Battery Switches 275 Amp Battery Master Switch Contour Lock system with removable plates for connection from all sides. This allows the switch to be a stand alone unit or locked together with other switches. The control knob can not be removed whilst in an ON or OFF position, however it can be removed by switching to an anticlockwise 45° position. Suitable for surface or recess mounting by cutting a 52mm diameter hole. Material Description .
Impact resistant plastic Tin plated copper studs and nuts
Termination Stud Size
2 x 10mm (3/4")
Operation
ON / OFF
Degree of Protection
IP 56
76 48
68
Max. Load 12 / 24V DC Continuous 275 Amps .
Intermittent 455 Amps (5 minutes)
.
Cranking
Max. Voltage
68
1250 Amps (10 seconds)
48V DC
275 Amp Battery Master Switch Part Number
4640
200 Amp Battery Selector Switch Compact battery selector switch with identical dimensions to the 4640 battery master switch to select either from two power sources or combine together. Will also isolate from the power sources. 7676
Material Description .
Impact resistant plastic
4848
6868
Tin plated copper studs and nuts
Termination Stud Size
3 x 10mm (3/4")
Operation
1-2-Both-OFF
Degree of Protection
IP 56
6868
Max. Load 12 / 24V DC Continuous 200 Amps - B1 or B2 .
Intermittent 300 Amps (5 minutes)
.
Cranking
Max. Voltage
1000 Amps (10 seconds)
48V DC
200 Amp Battery Master Switch Part Number
4723
275 Amp Easyfit Battery Master Switch The Easyfit battery switch allow installations through varying panel thicknesses via a removable threaded ring allowing for panel thicknesses up to 19mm (3/4â&#x20AC;?). The switch can also be surface mounted and the key is removable. Material Description .
Impact resistant plastic Tin plated copper studs and nuts
Termination Stud Size
2 x 10mm (3/4")
Operation
ON / OFF
Degree of Protection
IP 56
68 54
Max. Load 12 / 24V DC Continuous 275 Amps .
Intermittent 455 Amps (5 minutes)
.
Cranking
Max. Voltage
48V DC
275 Amp Battery Master Switch Part Number
4722 120
68 54
1250 Amps (10 seconds)
111 48
Accessories Battery Switches 600 Amp Battery Master Switch Contour Lock system with removable plates for connection from all sides. This allows the switch to be a stand alone unit or locked together with battery distribution modules. Control knob can not be removed whilst in an ON or OFF position, however it can be removed by switching to an anti-clockwise 45째 position. Switch can also be pad locked. Surface or recess mounting by cutting an 85mm diameter hole. Material Description .
Impact resistant plastic Tin plated copper studs and nuts
Termination Stud Size
2 x 12mm (1/2")
Operation
ON / OFF
Degree of Protection
IP 56
Max. Load 12 / 24V DC Continuous 600 Amps
102
Max. Voltage
Cranking
90
85
ON
Intermittent 800 Amps (5 minutes) .
62 51
102
OFF
2500 Amps (10 seconds)
89.4
48V DC
600 Amp Battery Master Switch Part Number
4720
350 Amp Battery Selector Switch Contour Lock system with removable plates for connection from all sides. This allows the switch to be a stand alone unit or locked together with battery distribution modules Necessary for on board systems fed from 2 or more batteries and whose supply comes from more than 1 generator. Rotary switch in 4 switch positions of battery 1-2-Both-OFF. Switch can also be pad locked. Suitable for surface or recess mounting by cutting an 85mm diameter hole. Material Description .
Impact resistant plastic Tin plated copper studs and nuts
Termination Stud Size
3 x 10mm (3/4")
Operation
1-2-Both-OFF
Degree of Protection
IP 56
62 51
102
90
Max. Load 12 / 24V DC Continuous 350 Amps - B1 or B2 . Continuous 500 Amps - B1 and B2 .
Intermittent 500 Amps (5 minutes)
.
Cranking
Max. Voltage
102
85
ON
OFF
1500 Amps (10 seconds)
89.4
48V DC
350 Amp Battery Selection Switch Part Number
4721
Remote Operated Battery Master Switch emote operated battery switch that may be used manually, or remotely with a separate switch R (not supplied). Battery switch may be mounted closer to the battery reducing cable lengths. Complete with removable key. Material Description .
Impact resistant plastic Tin plated copper studs and nuts
Termination Stud Size
2 x 10mm (3/4")
Operation
ON / OFF
Degree of Protection
IP 56
Max. Load 12 / 24V DC Continuous 275 Amps .
Intermittent 455 Amps (5 minutes)
.
Cranking
Voltage Range
44.5
68
76
100
68
1250 Amps (10 seconds)
9.5-32V DC
Remote Operated 275 Amp Battery Master Switch Part Number
4724 121
Accessories Battery Switches Heavy Duty Battery Master Switch Description
Enables switching from battery 1 or 2 or linking up ofâ&#x20AC;&#x2018;both batteries. May also be used as a manual isolator for charging batteries.
Operation
1-2-Both-OFF
Max. Load 12V / 175A or 24V / 87.5A (continuous)
Heavy Duty Battery Master Switch Part Number
2765
Dual Battery Master Switch Description
for 6-36V DC battery systems with alternators or generators. Water and vapour resistant. USCG safety conformance.
Operation
1-2-Both-OFF
Max. Load 12V / 500A or 24V / 250A (10 seconds) .
12V / 310A or 24V / 155A (continuous)
Dual Battery Master Switch Part Number
Part Number with Key Lock
2767
2768
2764 Series - 50 Amp Battery Master Switch Positive or negative cable can be switched as required. Key can be removed in the OFF position, current interrupted. Housing Description
Impact resistant plastic
Cable Connection
2 screw terminals, M10
Degree of Protection
IP X4
66 22
40
57 10
Max. load 12V / max. 1000A (10 seconds) 24V / max. 500A (10 seconds) (compliant with VDA 72750) 50 Amp Battery Master Switch Part Number
Spare Key Number
4650
4652
1559 Series - 100 Amp Battery Master Switch Heavy duty switch for high loads. Key can be removed in the OFF position, current interrupted. Positive or negative cable can be switched as required. Housing Description .
Impact resistant plastic 109
Steel key and mounting plate
Cable Connection
2 screw terminals, M10
Degree of Protection
IP X4
10
22
Max. Load 12V / 24V max. 2500A (10 seconds) 24V / max. 2500A (10 seconds) (compliant with VDA 72750)
100 Amp Battery Master Switch
122
Part Number
Spare Key Number
4653
4654
58 75
Max. Continuous Load 12V / 24V max. 100A .
120 100
62
10
Accessories Switch Panels Micro Switch Panels with LED Backlit Labels Dimensions Housing Switches Maximum Load
86 x 58 x 28mm (H x W x D) Impact resistant plastic Toggle, momentary or 3 way ON/OFF/ON 12V / 20A
Micro Switch Panels Description
Part Number
2 x ON/OFF rocker switches
2687
1 x ON/OFF rocker switch, 1 x 3 way momentary switch
2688
1 x ON/OFF rocker switch, 1 x ON/OFF/ON switch
2689
4 Way and 6 Way Compact Switch Panels Splash proof switch panels protected with neoprene rubber boots. Inline fuse holders with fuses behind panel. Dimensions Housing Description Switches Maximum Load
95 x 107 x 55mm (H x W x D) Impact resistant plastic 4 or 6 ON/OFF toggle switches 12V / 20A
Compact Switch Panels Description
Part Number
4 Way Switch Panel
2690
6 Way Switch Panel
2691
Backlit 6 Way Switch Panels Attractive splash proof switch panels protected with neoprene rubber boots. LED backlit labels. Removable cover plate over switches conceals screws. Dimensions Housing description Switches Switch Current Rating Maximum Load
158 x 112 x 65mm (H x W x D) Impact resistant plastic 6 ON/OFF toggle switches 20A DC, 10A AC. 12V / 20A
Backlit Switch Panels Description
Part Number
6 Way Switch Panel
2692
Switch panels with integrated circuit breakers and LED backlighting Pre-wired and suitable for 12V or 24V systems. Airpax circuit breakers LED backlit labels. Powder coated aluminium base plate. 4 Way Configuration Dimensions
1 x 5A / 2 x 10A / 1 x 15A 115 x 127 x 65mm (H x W x D)
Switch Panels with Circuit Breakers Description
Part Number
4 Way Switch Panel
2693
8 Way Configuration Dimensions
2 x 5A / 2 x 10A / 3 x 15A / 1 x 20A 200 x 127 x 65mm (H x W x D) 115 x 239 x 65mm (H x W x D)
Switch Panels with Circuit Breakers Description
Part Number
8 Way Vertical Panel
2694
8 Way Horizontal Panel
2695 123
Accessories Blade Fuse Boxes 4 Blade Fuse Boxes 6565 5353
Black plastic housing with transparent snap-fit lid. Flat plug connections.
8720
Ø5.5 Ø5.5
Number of Fuses
4
Fuse Type
2 x 10A
.
Part Number
Top Connector Fuse Box
8720
Side Connector Fuse Box
8720-S
18
41.5
57.5 1616
Description
40 1818
41.5 41.5
57.5 57.5
26
4040
25
4 Blade Fuse Boxes 8720-S
2626
Ø5.5
2525
2 x 15A
65 53
1639 39
39
6 Blade Fuse Boxes
Flat plug connections.
8721
Ø5.5 Ø5.5 Ø5.5
Number of Fuses
6
Fuse Type
3 x 10A
.
57.5
57.5 57.5
3 x 15A
Description
Part Number
Top Connector Fuse Box
8721
Side Connector Fuse Box
8721-S
41.5 41.5
41.5
1616
16
59
59 59
Number of Fuses
8
Fuse Type
4 x 10A
95.5
29.5
29.5
Ø
6.3 45.2
45.2
4 x 15A
95.5
36.5
36.5 6.3
Ø 5.3
105
105
Flat plug connections.
18
18 18
Ø 5.3
Black plastic housing with transparent snap-fit lid.
.
60
60 60
8 Blade Fuse Boxes
8722
26
26 26
25
25 25
6 Blade Fuse Boxes 8721-S
85 73
85 85 73 73
Black plastic housing with transparent snap-fit lid.
120
120
105 95.5
29.5
8 Blade Fuse Boxes 8722-S
Description
Part Number
Top Connector Fuse Box
8722
Side Connector Fuse Box
8722-S
36.5 6.3 45.2
16 Blade Fuse Box
135.2
135.2
122.6
122.6
93.6
93.6
120
16-way fuse box featuring black plastic housing with secondary locks, transparent cover and sealing gasket. Supplied with mounting brackets (male and female). Number of Fuses Fuse Type .
16 6 x 10A, 6 x 15A
36.5
135.2 122.6 Ø 8.5
36.5
2 x 20A, 2 x 25A 63.5
71
63.5
71
16 Blade Fuse Box Part Number
8724
93.6 36.5
63.5
124
71
Ø 8.5
Accessories Fuse Box / Cable Connectors / LED Pilot Lamps 6 Blade Fuse Box 90
Black plastic housing with transparent snap-fit lid and 6.3mm male blade terminals. 6mm diameter stud input. Complete with 2 spare fuse holders and label set.
61
80
47 90
Number of Fuses
6
Fuse Type
3 x 10A, 3 x 15A
72 61 47
6 Blade Fuse Box
72
Part Number
8725
Waterproof Cable Connectors
150
Heavy duty and completely sealed cable connectors with screw down lids and brass contacts.
75 35 120
150
150 75
Waterproof Cable Connectors
48
35
Part Number
Number of cables
2757
8 Screw Connections
120 Cable Size
up to 6mm2
2758
8 pole 8 double flat plug connections
up to 6mm2
2759
8 pole 8 double flat plug connections
up to 10mm2
LED Pilot Lamps eavy duty multi chip LED pilot lamps featuring shock-resistant one piece H construction for long service life and polycarbonate lens.
Mounting
22mm opening - For panels up to 38mm thick
Voltage
12V or 24V AC/DC
52
30
Degree of Protection IP 65
LED Pilot Lamps
14
Light Colour
12V Part Number
24V Part Number
Red
2716
2716-24V
Green
2717
2717-24V
Amber
2718
2718-24V
White
2719
2719-24V
Blue
2720
2720-24V
38
125
Accessories Marine Grade Switches Heavy Duty Ignition and Starter Switch Material Description
Switch with spring loaded return. 4 screw
terminals. Weather resistant rubber boot
and mounting nut assembly protects
against moisture and dirt with or without
key engaged. Brass construction.
Mounting
21mm diameter mounting opening
for panels up to 25mm thick
36
87 28 29
36 20
Maximum Load Ignition 10A, Start 5A, Accessory 10A at 12V Heavy Duty Ignition and Starter Switch Part Number
2766
Push / Pull Switch Material Description
Chrome knob and face nut.
Brass construction
Mounting
10mm diameter mounting opening for
panels up to 25mm thick
Maximum Load
20A at 12V
18
27
29
25
8.5 22 34
Push / Pull Switch Part Number
2761
15
22
28
29
Starter or Horn Push Button Switch 25
19
Material Description
Chrome button and face nut.
Brass construction
Mounting
16mm opening for panels up to 25mm thick
31 16
Maximum Load 20A at 12V Starter or Horn Push Button Switch Part Number
2763
Flick Toggle Switch Material Description
Chrome toggle and face nut.
Brass construction
25
Mounting
11mm diameter mounting opening for
10
panels up to 6mm thick
Maximum Load 20A at 12V Flick Toggle Switch Part Number
2762
126
15
50 25
13
26.5
Accessories Compact Rocker Switches Rocker Switches Rocker switches with push-on terminals for interior installations. Mounting
20mm opening - For panels up to 4mm
Maximum Load
10A @ 12V
Rocker Switches
23
Colour
Voltage
Action
Part Number
Red LED
12V
Off-On
4448
Red Bulb
12V
Off-On
4446
Amber Bulb
12V
Off-On
4445
Black
12/24V
Off-On
4444
Black
12/24V
On-On
4447
20
23
8
20
Rocker Switches Rocker switches with push-on terminals for interior installations. Mounting
12mm opening - For panels up to 5mm
.
43
20
30
2 x 6.3mm flat-plug contacts
Maximum Load
16A @ 12V / 8A @ 24V
Rocker Switches Voltage
Action
Part Number
12/24V
Off-On
4470
12/24V
On-On
4475
Illuminated Rocker Switches Illuminated rocker switches with push-on terminals for interior installations. Mounting
12mm opening - For panels up to 5mm
.
43
20
30
2 x 6.3mm flat-plug contacts
Maximum Load
16A @ 12V
Illuminated Rocker Switches Voltage
Action
Colour
12V
Off-On
Amber
Part Number
4471
12V
Off-On
Blue
4472
12V
Off-On
Green
4473
12V
Off-On
Red
4474
LED Illuminated Rocker Switches 43
LED Illuminated rocker switches with push-on terminals for interior installations. Mounting
12mm opening - For panels up to 5mm
.
2 x 6.3mm flat-plug contacts
Maximum Load
20
30 O3mm
16A @ 12V
LED Illuminated Rocker Switches Voltage
Action
Colour
12V
Off-On
Amber
Part Number
4479
12V
Off-On
Green
4480
12V
Off-On
Red
4481 127
Accessories Mag Code Power Outlet Systems Hella marine MagCode Power Systems are a revolutionary plug and socket solution for 12V and 24V systems. Unlike conventional connectors, MagCode Power Systems utilise magnetically coded flat contacts to deliver safe power across modular devices, far superior to ubiquitous cigarette lighter type sockets.
Power Port
Power Clip
Both the port (outlet / socket) and the clip (connector / plug) feature powerful magnets with an integral switching function ensuring a stable connection and safe power supply. Other metal objects of permanent magnets cannot energise the contacts at any time making the outlet completely safe and 100% short circuit protected. MagCode Power System Plus feature an additional mechanical twist lock offering greater security (higher separation forces) and reliable prevention of arcing. The mechanical twist lock ensures the automatic switching does not occur before the outside contact is securely fastened, eliminating problems associated with arching. MagCode Power Systems are water and dust resistant, easy to clean and suitable for retrofitting into a vast range of vessels. Available in 12V DC and 24V DC variants, the magnets of the two voltage variants are coded differently to avoid mix-ups. Features: - 100% short circuit proof - Stable connection - Easy to install - Shallow mounting depth - Water and dust resistant - Coded system avoids voltage mix-ups
Suitable for cable up to 2.5mm2
Power System
Material Description
Impact resistant plastic housing
Degree of Protection
Port (front) IP 6K 9K
Terminals
Port
6.3mm flat connectors
Clip
Screw Terminals
Maximum Load
25A
Open System (1)
Closed System (2)
Incoming current
Incoming current
Pole under current
Pole without current
Colour code Permanent magnets Plate with permanent magnets Voltageless Under current
MagCode Power System - Magnetic locking connection
Power System Plus
Description
12V Part Number
24V Part Number
Power System Kit (1x Power Port & 1x Port Clip)
8KW 958 990-801
8KW 958 992-801
Power Port
8JA 958 990-001
8JA 958 992-001
Power Clip
8JB 958 991-001
8JB 958 993-001
Open System (1)
Closed System (2)
Closed System (3)
Incoming current
Incoming current
Incoming current
Pole without current
Pole without current
Pole under current
Colour code Permanent magnets Plate with permanent magnets Voltageless Under current
MagCode Power System Plus - Magnetic locking connection plus mechanical twist lock Description
12V Part Number
Power System Plus Kit (1x Power Port & 1x Port Clip) 8KW 958 990-901
128
24V Part Number
8KW 958 992-901
Power Port Plus
8JA 958 990-101
8JA 958 992-101
Power Clip Plus
8JB 958 991-101
8JB 958 993-101
Accessories Plugs and Sockets
Water Resistant Plugs and Sockets Chrome brass plugs and sockets for exterior or interior installations. Socket includes plastic cap. Plug suitable for cable up to 6.5mm diameter.
Material Description
Chrome brass housings. Brass contacts
Maximum Load
22A at 12V
Installation
Screw terminals
37
31
25
38
Water Resistant Plugs and Sockets Description
Part Number
2 Pin Plug
2741
2 Pin Socket
2742
4 Pin Plug
2744
4 Pin Socket
2745
Chrome Brass Deck Glands - Ensures waterproof cable entry. Cable Diameter
Gland dimensions
Part Number
Cables up to 8mm dia.
18mm high x 32mm base diameter
2746
Cables up to 12mm dia.
18mm high x 38mm base diameter
2747
Waterproof Plugs and Sockets Watertight plastic plugs and sockets for exterior or interior installations. Socket includes plastic cap. Plug suitable for cable up to 8.0mm diameter. Material Description
Impact resistant plastic housing
Silver contacts.
Degree of Protection
IP 67
Maximum Load
2 to 4 pin; 16A at 12V, 7 pin; 10A at 12V
Installation 2 to 4 pin: Screw terminals
7 pin; Solder terminals
Mounting
2 to 4 pin; Flush mounting
7 pin; Surface mounting
31 22
33
68
Waterproof Plugs and Sockets Description
Part Number
2 Pin Plug and Socket
2782
3 Pin Plug and Socket
2783
4 Pin Plug and Socket
2784
7 Pin Plug and Socket
2785
Mounting Ring For surface mounting of the socket. Includes stainless steel screws and rubber gasket Part Number
2786
129
Accessories Super Seal Connectors
‘Super Seal’ connector housings were developed to satisfy the increasing demands for safe and reliable electrical connections. The connectors can be connected to existing components and used with the equipment presently in use in the automotive and marine industry (sensors, oil pressure sensors, water temperature monitoring circuits, etc.)
Super Seal Specifications Seals Made from silicon rubber. Seals shaped for easy insertion into connector. The hoop rings in the crimping area ensure excellent pull relief for the terminals. Connector Housing and secondary lock - polyamide 6.6 glass filled Resistant to Ozone, salts (CaCI2-NaCI), petrol, diesel fuel, anti-freeze, engine oil Temperature range -40°C to +125°C Degree of Protection IP 67 Insulation Resistance Minimum 200MW Terminals Plug Brass, tinned Current Rating 14A maximum Insert force Maximum 8N Contact Resistance Maximum 3mW Socket Phosphor bronze, tinned Double contact springs (main spring and anti-overload auxiliary spring) ensure minimum insert force and maximum contact pressure. Prefabricated secondary lock ensures that the terminal is plugged into the housing correctly and prevents it from slipping out of the connector.
Super Seal Connector Kit Contains: • 5 of each connector (plug and socket) • 100 9.HM4980.02 Socket terminals • 100 9.HM4980.04 Plug terminals • 100 9.HM4980.06 Yellow seals • 100 9.HM4980.09 Red cavity plugs Super Seal Connector Kit Part Number
HM4980 Super Seal Connectors Part Number
Description
HM4981-P
1 Pole Plug (Pack of 4)
HM4981-S
1 Pole Socket (Pack of 4)
HM4982-P
2 Pole Plug (Pack of 4)
HM4982-S
2 Pole Socket (Pack of 4)
HM4983-P
3 Pole Plug (Pack of 3)
HM4983-S
3 Pole Socket (Pack of 3)
HM4984-P
4 Pole Plug (Pack of 3)
HM4984-S
4 Pole Socket (Pack of 3)
HM4985-P
5 Pole Plug (Pack of 2)
HM4985-S
5 Pole Socket (Pack of 2)
HM4986-P
6 Pole Plug (Pack of 2)
HM4986-S
6 Pole Socket (Pack of 2)
Terminals for Plug (Pack of 50) Part Number
Description
9.HM4980.01
Suits cable 0.35 to 0.50mm2
9.HM4980.02
Suits cable 0.75 to 1.50mm2
Terminals for Socket (Pack of 50) Part Number
Description
9.HM4980.03
Suits cable 0.35 to 0.50mm2
9.HM4980.04
Suits cable 0.75 to 1.50mm2
Seals for Plug / Socket (Pack of 50) Part Number
Description
9.HM4980.05 Green seal to suit cable insulation 1.4-1.7mm diameter 9.HM4980.06 Yellow seal to suit cable insulation 1.8-2.4mm diameter 9.HM4980.07 Red seal to suit cable insulation 2.5-3.3mm diameter 9.HM4980.09 Red cavity plug (no hole) 130
Accessories Circuit Tester and Crimp Tools
Circuit Tester For quick fault tracing in electrical systems. Sturdy metal construction with screw-off cap and testing needle.
Suitable for
6, 12 and 24V applications only
Bulb to suit
24V M243
Circuit Tester Part Number
7013
Crimping Tool Spring return hand grips. Cuts cable. Strips insulation from cable measuring 2.5 to 6mm (0.75-6mm2) in diameter. Crimps all popular insulated and noninsulated terminals. Cuts bolts with metric threads M2.6, M3, M3.5, M4, M5.
Crimping Tool Part Number
8272
Crimping Tool Adjustable ratchet mechanism and spring release ensure a perfect crimp every time for insulated terminals Crimping Tool Part Number
8273
Super Seal Crimping Tool Crimping tool designed for use with Super Seal connector terminals
Super Seal Crimping Tool Part Number
HM8298
131
Accessories Relays - Diode Protected Pin No.
Description
85/2
Earth
86/1
Positive
87/5
Output
87a/4
Alternative output
30/3
Positive supply
. . .
Eliminating Voltage Spikes Voltage spikes from 300V to 500V can occur momentarily when a relay is switched off. Sensitive electronic equipment can be damaged or malfunctions can occur if these spikes reach the electrical network without suppression. A relay with a diode eliminates voltage spikes completely.
Note - For correct polarity connections of the diode protected relay ensure terminals 85 and 85 are connected as shown.
4 Pin, Normally Open Relay - 12V Maximum Load
40A
Protection
Diode
Current Draw
140mA
Normally Open Relay, 4 Pin
28 87 86
30 86
Voltage
Part Number
12V DC
3053
85
24.5
30 11.5
8587
5 Pin , Normally Open Relay - 12V Maximum Load
40A
Protection
Diode
Current Draw
140mA
86
Voltage
Part Number
12V DC
3055
85
30 30 86
Normally Open Relay, 5 Pin
87 87
858787
4 Pin , Normally Open Relay - 12V Maximum Load
50A
Protection
Diode
Current Draw
140mA
Normally Open Relay, 4 Pin Voltage
Part Number
12V DC
3059
87 85
86 30 30 86
85 87
Terminals 30 and 87 are 9.5mm terminals.
4 Pin , Normally Open Relay - 24V Maximum Load
22A
Protection
Diode
Current Draw
70mA
Normally Open Relay, 4 Pin Voltage
Part Number
24V DC
3054
28 87 86
85
30 86
11.5
8587
5 Pin , Normally Open Relay - 24V Maximum Load
22A
Protection
Diode
Current Draw
70mA
87 86
Voltage
Part Number
24V DC
3056
85 30
30 86
Normally Open Relay, 5 Pin
8587
4 Pin , Normally Open Relay - 24V Maximum Load
30A
Protection
Diode
Current Draw
70mA
Normally Open Relay, 4 Pin 132
Voltage
Part Number
24V DC
3060
24.5
30
87 85
86 30 30 86
85 87
Accessories Relays 16 16
34 34
17 17
4 Pin , Normally Open Fused Relay - 12V Maximum Load
25A with 25A fuse
Current Draw
140mA
40.5 40.5 23.5 23.5
24.5 24.5
11 11
Normally Open Relay, 4 Pin Voltage
Part Number
12V DC
3076
87 30
85 86
30 86 8587
16
34
17
4 Pin , Normally Open Fused Relay - 24V Maximum Load
15A with 15A fuse
Current Draw
80mA
40.5 23.5
24.5
11
Normally Open Relay, 4 Pin Voltage
Part Number
24V DC
3077
87 30
85 86
30 86 8587
4 Pin , Normally Open Mini Relay - 12V Maximum Load
30A
Current Draw
140mA 2626
Normally Open Relay, 4 Pin Voltage
Part Number
12V DC
3078
12V DC
3078-BULK (Pack of 10)
5 Pin , Normally Open Mini Relay - 12V Maximum Load
40A
Current Draw
140mA
1616 1616
4040 2424 1111
8686
Normally Open Relay, 5 Pin
8787 8787
8585
3030
Voltage
Part Number
12V DC
3082
12V DC
3082-BULK (Pack of 10)
3030 8686 858787 858787
2626
1616
4 Pin , Normally Open Mini Relay - 24V Maximum Load
30A
Current Draw
70mA
Normally Open Relay, 4 Pin
1616 4040 2424 1111
Voltage
Part Number
24V DC
3079
24V DC
3079-BULK (Pack of 10)
87 87 30 30
85 85 86 86
8587 30 868587 30 86
2626
5 Pin , Normally Open Mini Relay - 24V Maximum Load
30A
Current Draw
70mA
2424 1111
Normally Open Relay, 5 Pin Voltage
Part Number
24V DC
3083
24V DC
3083-BULK (Pack of 10)
8686
8787 8787
8585
3030 3030 8686 858787 858787
133
Accessories Relays 5 Pin, Change-over Relay - 12V Maximum Load
30-87, 40A/30-87a, 20A
Current Draw
140mA 86
Change-over Relay, 5 Pin Voltage
Part Number
12V DC
3080
12V DC
3080-BULK (Pack of 10)
87 87a
85
30 3086 858787a
5 Pin, Change-over Relay - 12V Maximum Load
30-87, 40A/30-87a, 15A
Protection
Diode
Current Draw
140mA
86
87 87a
85
30 3086 858787a
Change-over Relay, 5 Pin Voltage
Part Number
12V DC
3057
5 Pin, Change-over Relay - 24V Maximum Load
30-87, 30A/30-87a, 15A
Current Draw
70mA
Change-over Relay, 5 Pin
86
Voltage
Part Number
24V DC
3081
24V DC
3081-BULK (Pack of 10)
87 87a
85
30 3086 858787a
5 Pin, Change-over Relay - 24V Maximum Load
30-87, 22A/30-87a, 10A
Protection
Diode
Current Draw
140mA
86
87 87a
85
30
Change-over Relay, 5 Pin Voltage
Part Number
24V DC
3058
5 Pin, Time control Unit with Drop-out Delay
3086 858787a
Relay with manually adjustable drop-out delay function, 0 – 900 seconds.
S1
Time Control Drop Out Relay, 5 Pin Voltage
Part Number
12V DC
3086
24V DC
3086-24V
5 Pin, Time control Unit with Pick-up Delay Relay with manually adjustable pick-up delay function, 0 – 900 seconds. Maximum Load . Protection .
S2
T(s)
off
off
110...900
on
on
14...110
on
off
2.5...14
off
on
0...2.5
The delay interval is set by the switches S1 and S2. Adjustment exactly to the second is carried out using a screw driver.
Contact opened 10A 87 31 87a 15
Contact closed 20A/30min IP 50 Note : Switching terminal 15 starts timing
30 3015
318787a
Change-over Relay, 5 Pin
134
(+) Power 30
Voltage
Part Number
12V DC
3087
15
24V DC
3087-24V
31
87 87a
Accessories Relays Relay Connector Description
Single screw mounting. Sturdy plastic casing.
.
Supplied with 5 blade terminals.
Application
Suits 4 and 5 pin relays with 6.3mm flat pin connectors.
.
Hella Part No’s. 3076, 3077, 3078, 3079, 3080, 3081.
Mounting
Single screw mounting.
Relay Connector Part Number
Bulk Pack of 50
4973
4973-BULK
Note : P/N’s 3076-3077 are not suitable for multiple installation using this connector.
4 Pin, Normally Open Micro Relay - 12V Description . .
Relay 4 pin with bracket and parallel resistor. With two 4.8mm and two 6.3mm blade terminal contacts (terminals 3 and 5)
Maximum Load
20A @ 12V
Protection
Resistor
1
5
2
3 31
25
Micro Relay Voltage
Part Number
12V DC
3064
5 Pin, Change-over Relay (Micro Relay) - 12V
Note
Description . .
Relay 4 pin with bracket and parallel resistor. With two 4.8mm and two 6.3mm blade terminal contacts (terminals 3 and 5)
Maximum Load
3-5 20A/3-4 10A
Protection
Resistor
Terminal designations: 1 2 3 4 5
= = = = =
86 85 30 87a 87 1
Micro Change-over Relay Voltage
Part Number
12V DC
3065
4 2 5 3
31
2 54
Micros Relay Connector Description
or micro-relays with 5 pole SAE terminal layout. For receiving F three 4.8mm and two 6.3mm blade terminal connectors.
Socket
5 pole
Application
Suits P/N’s 3064 and 3065
Micro Relay Connector Voltage
Part Number
12V DC
4973-M
High Capacity Normally Open Relays
87 86
36.5
25
85 30 High Capacity Relays - 4 Pin
Voltage
8587
30 86 87 86
85
Max Load
22
Current Draw
Part Number
12V
70A
140mA
3084
24V
60A
70mA
3085
30 30 86
33 11.5 15 32.5
8587 87 85 30 86 87 85
30 86
54.5
8587
8587 30 86
Terminals 30 and 87 are 6mm stud.
45
30 High Capacity Relays - 4 Pin 86 Voltage
Max Load
Current Draw
34.5
14 17.5
Part Number
12V
180A (100A Cont.)
380mA
3061
24V
80A (60A Cont.)
180mA
3062
62.5 45
14 29
135
Accessories
Crimp Terminals
Push-on Female Terminals Blister Part No.
Quantity
Bulk Part No.
Quantity
Size
Cable
8200
20
8500
100
6.3mm
2.5 to 3mm cable 0.75 to 1.13mm cable
8201
20
8501
100
6.3mm
4mm cable 1.84mm cable
8202
15
8502
100
6.3mm
8203
12
8503
100
9.5mm
Quantity
Bulk Part No.
Quantity
Size
2
2
5 to 6mm cable 2.9 to 4.59mm cable 2
Fully Insulated Female Terminals Blister Part No.
Cable
8204
12
8504
100
6.3mm
2.5 to 3mm cable 0.75 to 1.13mm cable
8205
12
8505
100
6.3mm
4mm cable 1.84mm cable
Bulk Part No.
Quantity
Size
2
2
Push-on 2-Way Male and Female Terminals Blister Part No.
Quantity
8210
15
8510
100
6.3mm
8211
12
8511
100
6.3mm
8212
15
8512
100
6.3mm
Quantity
Bulk Part No.
Quantity
Size
Cable
2.5 to 3mm cable 0.75 to 1.13mm cable 2
4mm cable 1.84mm cable 2
Blade Male Terminals Blister Part No.
8213
15
8513
100
Cable
6.3mm
2.5 to 3mm cable 0.75 to 1.13mm cable 2
8214
12
8514
100
6.3mm
4mm cable 1.84mm cable
8215
10
8515
100
6.3mm
5 to 6mm cable 2.9 to 4.59mm cable
Quantity
Bulk Part No.
Quantity
Size
12
8516
50
6.3mm
Quantity
Bulk Part No.
Quantity
Size
Cable
ford type
2.5 to 3mm cable 0.75 to 1.13mm cable
2
2
Double Blade Male Connector Blister Part No.
8216
Bullet Single Male Connectors Blister Part No.
8220 8221
12
8520
100
2
4mm cable 1.84mm cable
14
8521
100
GMH type
Quantity
Bulk Part No.
Quantity
Size
Cable
ford type
2.5 to 3mm cable 0.75 to 1.13mm cable
2
Bullet Single Female Connectors Blister Part No.
Inslated Terminal Kit Part Number
8282
136
8222 8223
Part No. 8200 8201 8202 8203 8210 8211 8230 8231 8232 8241 8244 8247
12 14
8522 8523
100 100
Description Push-on female terminal Push-on female terminal Push-on female terminal Push-on female terminal Push-on 2 way male and female terminal Push-on 2 way male and female terminal Cable connector Cable connector Cable connector Eye terminal Eye terminal Eye terminal
GMH type
Quantity 18 14 12 10 10 10 15 15 12 25 20 12
2
4mm cable 1.84mm cable 2
Accessories Crimp Terminals
Cable Connectors Blister Part No.
Quantity
Bulk Part No.
Quantity
Cable
Suited for brass bullet terminals. 2.5 to 3mm cable 0.75 to 1.13mm cable 4mm cable 1.84mm cable 5 to 6mm cable 2.9 to 4.59mm cable
8224
13
8524
100
8230
15
8530
100
8231
15
8531
100
8232
10
8532
100
2
2
2
Quick Connect Cable Connectors Blister Part No.
8235
Quantity
9
Bulk Part No.
Quantity
8535
50
Features With the use of pliers, connects splices and insulates 0.75 to 1.13 mm (2.5 to 3 mm) cable. 2
Manufactured by 3M Company U.S.A.
Eye Terminals Blister Part No.
Quantity
Bulk Part No.
Quantity
Size
8240
25
8540
100
4.3mm
8241
20
8541
100
5.0mm
8242
15
8542
100
6.3mm
8243
20
8543
100
5.0mm
8244
20
8544
100
6.3mm
8245
15
8545
100
8.4mm
8246
12
8546
100
6.3mm
8247
12
8547
100
8.4mm
Cable
2.5 to 3mm cable 0.75 to 1.13mm cable 2
4mm cable 1.84mm cable 2
5 to 6mm cable 2.9 to 4.59mm cable 2
8248
10
8548
100
9.5mm
8249
10
8549
100
5.0mm
Spade Terminals Blister Part No.
Quantity
Bulk Part No.
Quantity
Size
8260
20
8560
100
4.3mm
8261
15
8561
100
5.0mm
8262
20
8562
100
4.3mm
8263
12
8563
100
5.0mm
Cable
2.5 to 3mm cable 0.75 to 1.13mm cable 2
4mm cable 1.84mm cable 2
Non-Insulated Brass Lucar Terminal - to suit 4973 Bulk Part No.
Inslated Terminal Kit Part Number
8284
Quantity
8573
Part No. Description 8200 Push-on female terminal 8204 Push-on female terminal 8213 Push-on male terminal 8220 Push-on male terminal 8222 Push-on female terminal 8223 Push-on female terminal 8231 Cable connector 8241 Eye Terminal 8247 Eye Terminal 8201 Push-on female terminal 8205 Push-on female terminal 8214 Push-on male terminal 8221 Push-on male terminal 8230 Cable connector 8235 Cable connector 8244 Eye terminal 8272 Crimping Tool
100
Quantity 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 1
Size
6.3mm
Cable
1.84mm
2
137
Accessories Cable Ties
mm 0
Description
100% 6/6 Nylon cable ties.
Features
Very flexible locking latch. Bell-mouthed-head
10
allows easier threading compared to regular
ties. Strongest possible locking power without
damaging the serrations of the tie. Quick
fastening and simple locking mechanism.
Black ties are UV resistant.
20 30 40 50
Clear Cable Ties
60
Quantity
70 80 90 100
100 per Pack
8341
78
2.5
8342
103
2.5
8343
143
3.2
8344
191
4.5
8345
368
4.8
8346
378
7.6
110 120 130 140
Length mm
Width mm
150 160
Black UV Resistant Cable Ties
170
Quantity
per Pack
180 190 200
100 per Pack
Length mm
Width mm
8341UV
78
2.5
8342UV
100
2.5
8333UV
8343UV
153
3.2
8334UV
8344UV
202
4.5
8335UV
8345UV
382
4.8
8336UV
8346UV
382
7.6
210 340
Quantity
10
350
360 370 380
Diagram not to scale
Cable Connectors Set of 12 brass terminals. Flexible plastic. Cable Connectors
138
Part Number
Suitable -
8455
for cables up to 2.5mm (0.75mm2)
8452
for cables up to 3mm (1.13mm2)
8453
for cables up to 5mm (2.90mm2)
8454
for cables up to 6mm (4.59mm2)
Accessories Circuit breakers and Fuses Circuit Breakers Compact single pole, heavy duty thermal circuit breakers with push-to-reset mechanism and separate (colour coded) manual release for extra low voltage wiring systems on all types of craft. Ideal replacement for blade fuses in heavy duty applications.
8736
8737
Voltage
Max 28V (Min. 10V)
Heavy Duty Circuit Breakers
8738
8739
8740 8741
Amps
Colour
Part Number
3A
Purple
8736
6A
Green
8737
10A
Red
8738
15A
White
8739
20A
Yellow
8740
25A
Blue
8741
Blade Fuses - 10 per pack 8771
8772
8773
8774
8775
8776
Colour
Amps
Tan
5 Amps
Part Number
8771
Brown
7.5 Amps
8772
Red
10 Amps
8773
Blue
15 Amps
8774
Yellow
20 Amps
8775
White
25 Amps
8776
Green
30 Amps
8777
8777
Mini Blade Fuses - 10 per pack
8771MINI 8772MINI 8773MINI
8774MINI 8775MINI 8776MINI
8777MINI
Colour
Amps
Part Number
Tan
5 Amps
8771MINI
Brown
7.5 Amps
8772MINI
Red
10 Amps
8773MINI
Blue
15 Amps
8774MINI
Yellow
20 Amps
8775MINI
White
25 Amps
8776MINI
Green
30 Amps
8777MINI
Blade Fuse Box Holder - 1 Fuse 30A maximum. May be interlocked face to face or end to end. Complete with transparent dust cover lid and snap-in terminals. Suitable for cable up to 5mm (Conductor cross sectional area up to 2.90mm2). Blade Fuse Box Holder - 1 Fuse Part Number
8718
In-Line Blade Fuse Holder - 1 Fuse 20A maximum. Complete with 15A blade fuse. Quick connect type, manufactured by 3M USA. Suitable for cable up to 4mm (Conductor cross sectional area up to 1.84mm2). In-Line Blade Fuse Holder - 1 Fuse Part Number
8719 139
Accessories Bilge Pumps Bilge Pumps Hella marine bilge pumps are completely submersible, vibration resistant and maintenance free. Removable base plate allows cleaning of the intake chamber and also serves as a mounting plate. For reliable operation and safety Hella marine recommends the following rules be followed: - Use to pump bilge water only. - Do not leave permanently submerged in water contaminated with oils or cleaning products. - Test regularly. - Clean the strainer regularly. - Do not use with unreliable float switches. - Do not use to compensate for a leaking vessel. - Do not use as continuous duty live bait tank pumps.
1500 l/hr / 400 HPH Gilge Pump 1500 l/h / 400 GPH 12V DC 4.2m 3.5A 13.5mm 20.0mm
111
HEAD (ft)
Pumping Capacity Voltage Delivery Head Power Consumption Outlet Hose Internal Diameter Outlet Hose External Diameter 1500 l/hr / 400 GPH Bilge Pump
0
81
Part Number
18 16 14 12 10 8 6 4 2 1 2 3 4 5 6 7 8 FLOW (Gallon/ Min)
2730
2300 l/hr / 600 GPH Bilge Pump 2300 l/h / 600 GPH 12V DC 5m 5A 13.5mm 20.0mm
128
HEAD (ft)
Pumping Capacity Voltage Delivery Head Power Consumption Outlet Hose Internal Diameter Outlet Hose External Diameter 2300 l/hr / 600 GPH Bilge Pump
88
Part Number
20 18 16 14 12 10 8 6 4 2 0
1
2 3 4 5 6 7 8 9 10 11 12 FLOW (Gallon/ Min)
2731
12V 6500 l/hr / 1750 GPH Bilge Pump Pumping Capacity Voltage Delivery Head Power Consumption Outlet Hose Internal Diameter Outlet hose External Diameter
6500 l/h / 1750 GPH 12V DC 4m 10A 25.0mm 30.0mm
12V 6500 l/hr / 1750 GPH Bilge Pump Part Number
2732
Pumping Capacity Delivery Head Voltage Power Consumption Outlet Hose Internal Diameter Outlet Hose External Diameter 24V 6500 l/hr / 1750 GPH Bilge Pump Part Number
2733 140
6500 l/h / 1750 GPH 4m 24V DC 6A 25.0mm 30.0mm
164
HEAD (ft)
24V 6500 l/hr / 1750 GPH Bilge Pump
119
14 12 10 8 6 4 2 0
3 6 9 12 15 18 21 24 27 30 33 FLOW (Gallon/ Min)
Replacement Bulbs
Accessories Replacement Bulbs - Introduction Hella marine bulbs are top quality products sourced from leading international bulb manufacturers. Below is an introduction on each bulb type.
Incandescent Bulbs Incandescent bulbs, also referred to as ‘standard’ bulbs, produce light by heating a filament until it is white hot. Incandescent bulbs become progressively dimmer over the course of their service life, because heating the filament makes it slowly burn away, with residue settling on the inside of the glass envelope.
Halogen Bulbs Halogen bulbs contain a gas mixture which consists of halogen compounds (usually compounds of iodine or bromine). Light is produced in much the same way as an incandescent bulb. However, when particles burn off the filament, they are returned by a chemical process involving the halogen in the bulb. This means that the light produced by a halogen bulb is relatively consistent over the course of the bulb’s entire service life.
Xenon Gas Discharge (HID) Bulbs Xenon bulbs use an electric current arc passed through Xenon gas, rather than a filament, to produce light. This method requires minimal electric current draw compared to filament lighting, and its output is comparable to daylight. As the human eye has evolved to see in daylight, Xenon lighting causes less eye strain than other bulb types, making it a more convenient and safer night lighting option. Xenon bulbs increase reflections on road signs and markings. Advantages of Gas Discharge (HID) Lighting HID lighting is highly energy efficient producing approximately 90 lumens per watt compared to a quartz halogen lamp of approximately 25 lumens per watt. • Light colour very similar to daylight – reduces eye strain • Steady brightness levels even if power supply varies • Impact and vibration resistant light arc ensures a bulb service life five times longer than standard bulbs
Light Output Operating Voltage %
Light Output %
85
53
90
67
95
83
100
100
(Based on a mean operating voltage of 100% = 13.5V or 27V)
142
Light output for a filament light source is dependent on the voltage. Low voltage causes low output and shorter life, especially for halogen bulbs, because regeneration does not occur. Over voltage causes excessive tungsten erosion and the filament may prematurely break due to the filament being closer to its melting point.
Accessories Replacement Bulbs
Navigation Lamp Bulbs. BAY15d Base Voltage
Wattage
Base
Part Number
12V
>10/12V
BAY15d
EA 1210
12V
25/30
BAY15d
EA 1225
24V
>10/12V
BAY15d
EA 2410
24V
25/30
BAY15d
EA 2425
Interior Lamp Bulbs. BAY15s Base 25.5
15
45
Voltage
Wattage
Base
ECE Category
Part Number
12V
5
BA15s
R5W
G125
24V
5
BA15s
R5W
G245
12V
10
BA15s
R10W
G1210
24V
10
BA15s
R10W
G2410
12V
21/5
BA15d
P21/5W
S1221/5V
Voltage
Wattage
Base
Part Number
12V
18
BA15s
R1218
24V
18
BA15s
12V
21
BA15s
P21W
R1221
24V
21
BA15s
P21W
R2421
R2418
Navigation Lamp Bulbs. SV8.5 Base 10.5
41
8.5
Voltage
Wattage
Base
Part Number
12V
10
SV8.5
K1210
24V
10
SV8.5
K2410
10.5
36
8.5
Voltage
Wattage
Base
ECE Category
Part Number
12V
5
SV8.5
C5W
L125
24V
5
SV8.5
C5W
L245
Voltage
Wattage
Base
12V
10
SV8.5
10.5
8.5
31
Part Number
N1210
143
Accessories Replacement Bulbs Halogen Interior Lamp Bulbs. G4 Base 9.5
30
Voltage
Wattage
Base
Part Number
12V
5
G4
YM125
12V
10
G4
YM1210
12V
20
G4
YM1220
24V
20
G4
YM2420
24V
10
G4
YM2410
Halogen Interior Lamp Bulbs. BA9s Base
9.2 9.1
26
Voltage
Wattage
Base
12V
2
BA9s
ECE Category
12V
6
BA9s
12V
4
BA9s
T4W
HL124
T4W
HL244
24V
4
BA9s
12V
5
BA9s
Part Number
H122 HL126X
YL125
Deck Floodlight Bulb. GX5.3 Base Voltage
Wattage
Base
Category
Part Number
8GH 998 529-001
12V
20
GX5.3
MR16
28V
20
GX5.3
MR16
8GH 998 529-011
Deck Floodlight and Search Light Bulbs. PK22s Base. H3 11.5
32
22
Voltage
Wattage
Base
Category
Part Number
12V
55
PK22s
H3
YC1255
24V
70
PK22s
H3
YC2470
12V
100
PK22s
H3
YC12100
YC655
32
11
75
Deck Floodlight Gas Discharge (HID) Bulbs. D2S Colour Temp
Voltage
Wattage Base
ECE Category
Part Number
4200K
12/24V
35 P32d-2
D2S
XN4000
5000K
12/24V
35 P32d-2
D2S
XN4000CM
6000K
12/24V
35 P32d-2
D2S
XN4000WX
Compact Fluorescent Tubes. TL8 and 2G7 Base 302 16
120 75
144
Colour
Voltage
Wattage
Base
Lumens
Part Number
Cool White
12/24V
8
TL8W
400 lm
FL8
Cool White
FL7CW4P
12/24V
7
2G7
400 lm
Warm White 12/24V
7
2G7
400 lm
Cool White
12/24V
11
2G7
900 lm
Warm White 12/24V
11
2G7
900 lm
FL7WW4P FL11CW4P FL11WW4P
Index by Part Number
Index by Part Number
Index by Part Number
:: 1
146
Page
1519
44
1520
54
1524
54
1525
54
1GA 007 118-051
44
1GA 007 118-081
44
1GA 007 118-091
44
1GA 007 118-101
44
1GA 996 082-091
45
1GA 996 361-131
48
1GA 996 361-141
48
1GA 996 361-391
48
1GA 996 361-401
48
1GA 998 503-001
52
1GA 998 503-011
52
1GA 998 506-001
52
1GB 998 542-001
46
1GM 996 134-501
49
1GM 996 134-511
49
1GM 996 136-121
36
1GM 996 136-181
36
1GO 996 176-722
37
1GO 996 176-731
37
:: 2
Page
2051
114
2051BULK
114
2053
114
2053BULK
114
2053SBULK
114
2054
114
2054BULK
114
2379
112
2379-TP
112
2394
113
2394-6M
113
2394-6MBULK
113
2394-9MBULK
113
2394BULK
113
2394-H
112
2394-V
112
2395
113
2395-6M
113
2395-6MBULK
113
2395-9MBULK
113
2395BULK
113
2395-TP
113
2399
112
2399BL
112
2399-TP
112
2559
114
2559BULK
114
2604
81
2605
102
2608
102
2610M
98
2617M
98
2633
97
2636
97
2818
26
2JA 004 192-001
102
2637
97
2818W
26
2JA 004 192-041
102
2637W
97
2828
30
2JA 004 192-071
102
2641-12V
91
2828-1
30
2JA 004 192-081
102
2641-24V
91
2830
46
2JA 005 759-011
101
2642
96
2833
47
2JA 005 759-021
101
2642-24V
96
2834
47
2JA 006 044-001
99
2643
96
2835
49
2JA 006 044-021
99
2643-24V
96
2835-24V
49
2JA 006 046-001
99
2644
96
2840
29
2JA 006 046-021
99
2644-24V
96
2840W
29
2JA 006 047-001
99
2645
98
2841
29
2JA 006 047-021
99
2645SW
98
2841W
29
2JA 006 886-001
101
2687
123
2842
29
2JA 343 606-002
90
2688
123
2842W
29
2JA 343 606-012
90
2689
123
2843
29
2JA 343 606-202
90
2690
123
2843W
29
2JA 343 606-212
90
2691
123
2844
31
2JA 343 720-012
93
2692
123
2845
31
2JA 343 720-022
93
2693
123
2846
32
2JA 343 720-042
93
2694
123
2846-1
32
2JA 343 720-052
93
2695
123
2846W
32
2JA 343 720-112
93
2716
125
2847
32
2JA 343 720-122
93
2717
125
2847-1
32
2JA 343 720-142
93
2718
125
2848
32
2JA 343 720-152
93
2719
125
2848-1
32
2JA 343 720-522
93
2720
125
2850
30
2JA 343 720-622
93
2730
140
2850-1
30
2JA 343 980-002
69
2731
140
2850W
30
2JA 343 980-012
69
2732
140
2851
30
2JA 343 980-042
69
2733
140
2851-1
30
2JA 343 980-052
69
2741
129
2851W
30
2JA 343 980-062
69
2742
129
2852
30
2JA 343 980-102
69
2744
129
2852-1
30
2JA 343 980-112
69
2745
129
2852W
30
2JA 343 980-142
69
2746
129
2853
30
2JA 343 980-152
69
2747
129
2853-1
30
2JA 343 980-162
69
2757
125
2853W
30
2JA 343 980-202
69
2758
125
2854
30
2JA 343 980-212
69
2759
125
2854-1
30
2JA 343 980-242
69
2761
126
2854W
30
2JA 343 980-252
69
2762
126
2859
44
2JA 343 980-262
69
2763
126
2860
45
2JA 959 037-521
73
2765
122
2862
53
2JA 959 037-522
73
2766
126
2863
53
2JA 959 073-051
91
2767
122
2864
54
2JA 959 073-251
91
2768
122
2866
54
2JA 959 076-511
65
2782
129
2871
29
2JA 959 076-551
65
2783
129
2871W
29
2JA 959 076-561
65
2784
129
2875
26
2JA 959 076-611
65
2785
129
2875W
26
2JA 959 596-001
67
2786
129
2.9800.08
98
2JA 959 596-051
67
2791
98
2JA 959 596-101
67
2794
100
2AB 004 813-071
97
2JA 959 596-151
67
281534
43
2AB 004 813-081
97
2JA 959 596-501
67
281535
43
2JA 959 596-551
67
281536
43
2JA 959 596-601
67
281538
43
2JA 001 330-012
102
2JA 959 596-651
67
2816
26
2JA 003 231-002
102
2JA 959 599-001
67
2816W
26
2JA 003 231-022
102
2JA 959 599-051
67
2817
26
2JA 003 681-001
101
2JA 959 599-101
67
2817W
26
2JA 003 681-031
101
2JA 959 599-151
67
:: 2JA
Page
Index by Part Number
2JA 959 599-501
67
2JA 980 770-211
71
2LT 959 900-501
19
2LT 980 520-801
23
2JA 959 599-551
67
2JA 980 770-221
71
2LT 959 900-511
19
2LT 980 520-811
23
2JA 959 599-601
67
2JA 980 770-301
71
2LT 959 900-601
19
2LT 980 520-901
23
2JA 959 599-651
67
2JA 980 770-311
71
2LT 959 900-611
19
2LT 980 520-911
23
2JA 959 700-101
74
2JA 980 770-321
71
2LT 959 908-001
19
2LT 980 620-801
24
2JA 959 700-701
74
2JA 980 771-201
71
2LT 959 908-011
19
2LT 980 620-811
24
2JA 959 704-001
74
2JA 980 771-211
71
2LT 959 908-201
19
2LT 980 620-901
24
2JA 959 704-501
74
2JA 980 771-221
71
2LT 959 908-211
19
2LT 980 620-911
24
2JA 959 820-301
80
2JA 980 771-301
71
2LT 959 908-501
19
2LT 980 650-001
17
2JA 959 820-321
80
2JA 980 771-311
71
2LT 959 908-511
19
2LT 980 670-201
39
2JA 959 820-511
80
2JA 980 771-321
71
2LT 959 908-601
19
2LT 980 670-211
39
2JA 959 820-521
80
2JA 998 508-001
98
2LT 959 908-611
19
2LT 980 670-301
39
2JA 959 950-111
79
2JA 998 516-011
100
2LT 959 909-001
19
2LT 980 670-311
39
2JA 959 950-121
79
2JA 998 516-021
100
2LT 959 909-011
19
2LT 980 670-341
39
2JA 959 950-511
79
2JA 998 516-031
100
2LT 959 909-201
19
2LT 980 670-351
39
2JA 959 950-521
79
2JA 998 516-041
100
2LT 959 909-211
19
2LT 980 750-001
106
2JA 959 951-111
79
2JA 998 516-051
100
2LT 959 909-501
19
2LT 980 750-101
106
2JA 959 951-121
79
2JA 998 527-001
100
2LT 959 909-511
19
2LT 980 751-001
106
2JA 980 596-001
67
2JA 998 527-011
100
2LT 959 909-601
19
2LT 980 751-101
106
2JA 980 596-031
67
2JA 998 527-021
100
2LT 959 909-611
19
2LT 980 752-001
107
2JA 980 596-101
67
2JA 998 543-001
92
2LT 959 910-011
21
2LT 980 752-101
107
2JA 980 596-131
67
2JA 998 560-001
83
2LT 959 910-111
21
2LT 980 753-001
107
2JA 980 596-501
67
2JA 998 560-011
83
2LT 959 910-431
21
2LT 980 753-101
107
2JA 980 596-531
67
2JA 998 560-041
83
2LT 959 910-451
21
2LT 980 754-001
108
2JA 980 596-601
67
2JA 998 560-051
83
2LT 959 910-531
21
2LT 980 754-101
108
2JA 980 596-631
67
2JA 998 560-081
83
2LT 959 910-551
21
2LT 980 755-001
109
2JA 980 597-001
67
2JA 998 560-091
83
2LT 959 910-621
21
2LT 980 755-101
109
2JA 980 597-031
67
2JA 998 560-101
83
2LT 959 910-631
21
2LT 980 756-001
109
2JA 980 597-101
67
2JA 998 560-111
83
2LT 959 910-651
21
2LT 980 756-101
109
2JA 980 597-131
67
2JA 998 560-121
83
2LT 959 910-661
21
2LT 980 757-001
109
2JA 980 597-501
67
2JA 998 560-151
83
2LT 959 910-721
21
2LT 980 757-101
109
2JA 980 597-531
67
2JA 998 560-161
83
2LT 959 910-731
21
2LT 980 910-001
21
2JA 980 597-601
67
2JA 998 560-171
83
2LT 959 910-751
21
2LT 980 910-011
21
2JA 980 597-631
67
2JA 998 560-201
83
2LT 959 910-761
21
2LT 980 910-201
21
2JA 980 604-011
73
2JA 998 560-211
83
2LT 959 940-201
19
2LT 980 910-211
21
2JA 980 608-001
73
2JA 998 560-221
83
2LT 959 940-211
19
2LT 980 910-401
21
2JA 980 608-002
73
2JA 998 560-231
83
2LT 959 940-501
19
2LT 980 910-411
21
2JA 980 630-001
77
2JA 998 560-241
83
2LT 959 940-511
19
2LT 995 001-001
27
2JA 980 630-011
77
2JA 998 560-251
83
2LT 959 940-601
19
2LT 995 001-031
27
2JA 980 630-101
77
2JA 998 560-301
83
2LT 959 940-611
19
2LT 995 002-001
28
2JA 980 630-111
77
2JA 998 560-311
83
2LT 980 520-001
23
2LT 995 002-011
28
2JA 980 630-501
77
2JA 998 560-321
83
2LT 980 520-011
23
2LT 995 002-021
28
2JA 980 630-511
77
2JA 998 560-331
83
2LT 980 520-031
23
2LT 995 002-031
28
2JA 980 630-601
77
2JA 998 560-341
83
2LT 980 520-041
23
2LT 995 002-041
28
2JA 980 630-611
77
2JA 998 560-351
83
2LT 980 520-101
23
2LT 995 002-051
28
2JA 980 631-001
75
2JA 998 560-401
83
2LT 980 520-111
23
2LT 995 002-061
28
2JA 980 631-011
75
2JA 998 560-411
83
2LT 980 520-131
23
2LT 995 002-071
28
2JA 980 631-101
75
2JA 998 560-421
83
2LT 980 520-161
23
2LT 995 002-081
28
2JA 980 631-111
75
2JA 998 560-431
83
2LT 980 520-201
23
2LT 995 002-091
28
2JA 980 631-501
75
2JA 998 560-441
83
2LT 980 520-211
23
2LT 995 002-121
28
2JA 980 631-511
75
2JA 998 560-451
83
2LT 980 520-231
23
2LT 995 002-131
28
2JA 980 631-601
75
2LT 980 520-241
23
2LT 995 002-141
28
2JA 980 631-611
75
2LT 980 520-301
23
2LT 995 002-151
28
2JA 980 681-001
65
2LT 980 520-311
23
2LT 995 002-161
28
2JA 980 681-051
65
2LT 002 984-801
32
2LT 980 520-331
23
2LT 995 002-171
28
2JA 980 681-101
65
2LT 002 984-811
32
2LT 980 520-361
23
2LT 995 002-181
28
2JA 980 681-151
65
2LT 002 984-821
32
2LT 980 520-501
23
2LT 995 002-191
28
2JA 980 681-501
65
2LT 002 984-831
32
2LT 980 520-511
23
2LT 995 002-201
28
2JA 980 681-551
65
2LT 959 900-001
19
2LT 980 520-531
23
2LT 995 002-211
28
2JA 980 681-601
65
2LT 959 900-011
19
2LT 980 520-541
23
2LT 995 002-221
28
2JA 980 681-651
65
2LT 959 900-201
19
2LT 980 520-601
23
2LT 995 002-321
28
2JA 980 770-201
71
2LT 959 900-211
19
2LT 980 520-611
23
2LT 995 003-001
27
:: 2LT
Page
147
Index by Part Number
2LT 995 003-021
27
2XT 959 680-911
88
2XT 980 503-091
85
2XT 980 580-541
87
2LT 995 003-031
27
2XT 959 680-921
88
2XT 980 503-221
85
2XT 980 580-551
87
2LT 995 003-041
27
2XT 959 680-931
88
2XT 980 503-231
85
2XT 980 580-561
87
2LT 995 003-061
27
2XT 980 500-021
85
2XT 980 503-241
85
2XT 980 580-571
87
2LT 995 003-071
27
2XT 980 500-031
85
2XT 980 503-251
85
2XT 980 580-731
87
2LT 995 004-001
27
2XT 980 500-041
85
2XT 980 503-291
85
2XT 980 580-741
87
2LT 995 004-011
27
2XT 980 500-051
85
2XT 980 503-421
85
2XT 980 580-751
87
2LT 995 005-001
27
2XT 980 500-091
85
2XT 980 503-431
85
2XT 980 580-761
87
2LT 995 005-011
27
2XT 980 500-221
85
2XT 980 503-441
85
2XT 980 580-771
87
2LT 995 005-021
27
2XT 980 500-231
85
2XT 980 503-451
85
2XT 980 581-031
87
2LT 995 005-031
27
2XT 980 500-241
85
2XT 980 503-491
85
2XT 980 581-041
87
2LT 995 006-001
27
2XT 980 500-251
85
2XT 980 507-021
85
2XT 980 581-051
87
2LT 998 504-001
51
2XT 980 500-291
85
2XT 980 507-031
85
2XT 980 581-061
87
2LT 998 504-011
51
2XT 980 500-521
85
2XT 980 507-041
85
2XT 980 581-071
87
2LT 998 505-001
50
2XT 980 500-531
85
2XT 980 507-051
85
2XT 980 581-231
87
2LT 998 505-011
50
2XT 980 500-541
85
2XT 980 507-091
85
2XT 980 581-241
87
2XT 980 500-551
85
2XT 980 507-221
85
2XT 980 581-251
87
2XT 980 500-591
85
2XT 980 507-231
85
2XT 980 581-261
87
2XT 980 500-721
85
2XT 980 507-241
85
2XT 980 581-271
87
:: 2XT
148
Page
2XT 959 510-001
89
2XT 980 500-731
85
2XT 980 507-251
85
2XT 980 581-531
87
2XT 959 510-011
89
2XT 980 500-741
85
2XT 980 507-301
85
2XT 980 581-541
87
2XT 959 510-051
89
2XT 980 500-751
85
2XT 980 507-421
85
2XT 980 581-551
87
2XT 959 510-061
89
2XT 980 500-791
85
2XT 980 507-431
85
2XT 980 581-561
87
2XT 959 510-151
89
2XT 980 501-021
85
2XT 980 507-441
85
2XT 980 581-571
87
2XT 959 510-251
89
2XT 980 501-031
85
2XT 980 507-451
85
2XT 980 581-731
87
2XT 959 510-301
89
2XT 980 501-041
85
2XT 980 507-491
85
2XT 980 581-741
87
2XT 959 510-311
89
2XT 980 501-051
85
2XT 980 507-621
85
2XT 980 581-751
87
2XT 959 510-331
89
2XT 980 501-091
85
2XT 980 507-631
85
2XT 980 581-761
87
2XT 959 510-351
89
2XT 980 501-221
85
2XT 980 507-641
85
2XT 980 581-771
87
2XT 959 510-451
89
2XT 980 501-231
85
2XT 980 507-651
85
2XT 980 582-031
87
2XT 959 510-501
89
2XT 980 501-241
85
2XT 980 507-691
85
2XT 980 582-041
87
2XT 959 510-511
89
2XT 980 501-251
85
2XT 980 508-021
85
2XT 980 582-051
87
2XT 959 510-551
89
2XT 980 501-291
85
2XT 980 508-031
85
2XT 980 582-061
87
2XT 959 510-561
89
2XT 980 501-521
85
2XT 980 508-041
85
2XT 980 582-071
87
2XT 959 510-621
89
2XT 980 501-531
85
2XT 980 508-051
85
2XT 980 582-231
87
2XT 959 510-651
89
2XT 980 501-541
85
2XT 980 508-091
85
2XT 980 582-241
87
2XT 959 510-701
89
2XT 980 501-551
85
2XT 980 508-221
85
2XT 980 582-251
87
2XT 959 510-711
89
2XT 980 501-591
85
2XT 980 508-231
85
2XT 980 582-261
87
2XT 959 510-751
89
2XT 980 501-721
85
2XT 980 508-241
85
2XT 980 582-271
87
2XT 959 510-761
89
2XT 980 501-731
85
2XT 980 508-251
85
2XT 980 582-431
87
2XT 959 510-851
89
2XT 980 501-741
85
2XT 980 508-291
85
2XT 980 582-441
87
2XT 959 510-901
89
2XT 980 501-751
85
2XT 980 508-421
85
2XT 980 582-451
87
2XT 959 510-931
89
2XT 980 501-791
85
2XT 980 508-431
85
2XT 980 582-461
87
2XT 959 630-151
92
2XT 980 502-021
85
2XT 980 508-441
85
2XT 980 582-471
87
2XT 959 630-251
92
2XT 980 502-031
85
2XT 980 508-451
85
2XT 980 583-031
87
2XT 959 630-351
17
2XT 980 502-041
85
2XT 980 508-491
85
2XT 980 583-041
87
2XT 959 630-351
92
2XT 980 502-051
85
2XT 980 508-621
85
2XT 980 583-051
87
2XT 959 630-451
17
2XT 980 502-091
85
2XT 980 508-631
85
2XT 980 583-061
87
2XT 959 630-451
92
2XT 980 502-221
85
2XT 980 508-641
85
2XT 980 583-071
87
2XT 959 630-551
92
2XT 980 502-231
85
2XT 980 508-651
85
2XT 980 583-231
87
2XT 959 680-411
88
2XT 980 502-241
85
2XT 980 508-691
85
2XT 980 583-241
87
2XT 959 680-421
88
2XT 980 502-251
85
2XT 980 580-031
87
2XT 980 583-251
87
2XT 959 680-431
88
2XT 980 502-291
85
2XT 980 580-041
87
2XT 980 583-261
87
2XT 959 680-611
88
2XT 980 502-421
85
2XT 980 580-051
87
2XT 980 583-271
87
2XT 959 680-621
88
2XT 980 502-431
85
2XT 980 580-061
87
2XT 980 583-431
87
2XT 959 680-631
88
2XT 980 502-441
85
2XT 980 580-071
87
2XT 980 583-441
87
2XT 959 680-711
88
2XT 980 502-451
85
2XT 980 580-231
87
2XT 980 583-451
87
2XT 959 680-721
88
2XT 980 502-491
85
2XT 980 580-241
87
2XT 980 583-461
87
2XT 959 680-731
88
2XT 980 503-021
85
2XT 980 580-251
87
2XT 980 583-471
87
2XT 959 680-811
88
2XT 980 503-031
85
2XT 980 580-261
87
2XT 980 587-031
87
2XT 959 680-841
88
2XT 980 503-041
85
2XT 980 580-271
87
2XT 980 587-041
87
2XT 959 680-851
88
2XT 980 503-051
85
2XT 980 580-531
87
2XT 980 587-051
87
Index by Part Number
2XT 980 587-061
87
3081-BULK
134
6101
118
8342UV
138
2XT 980 587-071
87
3082
133
6102
118
8343
138
2XT 980 587-231
87
3082-BULK
133
8343UV
138
2XT 980 587-241
87
3083
133
8344
138
2XT 980 587-251
87
3083-BULK
133
87
3084
135
Page
138
2XT 980 587-261
:: 7
8344UV 8345
138
2XT 980 587-271
87
3085
135
7013
131
8345UV
138
2XT 980 587-431
87
3086
134
8346
138
2XT 980 587-441
87
3086-24V
134
8346UV
138
2XT 980 587-451
87
3087
134
87
3087-24V
134
Page
138
2XT 980 587-461
:: 8
8452 8453
138
2XT 980 587-471
87
3099
119
8000
116
8454
138
2XT 980 587-631
87
8009
116
8455
138
2XT 980 587-641
87
8009BULK
116
8500
136
2XT 980 587-651
87
Page
116
8501
136
87
:: 4
8022
2XT 980 587-661
8200
136
8502
136
2XT 980 587-671
87
4444
127
8201
136
8503
136
2XT 980 588-031
87
4445
127
8202
136
8504
136
2XT 980 588-041
87
4446
127
8203
136
8505
136
2XT 980 588-051
87
4447
127
8204
136
8510
136
2XT 980 588-061
87
4448
127
8205
136
8511
136
2XT 980 588-071
87
4470
127
8210
136
8512
136
2XT 980 588-231
87
4471
127
8211
136
8513
136
2XT 980 588-241
87
4472
127
8212
136
8514
136
2XT 980 588-251
87
4473
127
8213
136
8515
136
2XT 980 588-261
87
4474
127
8214
136
8516
136
2XT 980 588-271
87
4475
127
8215
136
8520
136
2XT 980 588-431
87
4479
127
8216
136
8521
136
2XT 980 588-441
87
4480
127
8220
136
8522
136
2XT 980 588-451
87
4481
127
8221
136
8523
136
2XT 980 588-461
87
4640
120
8222
136
8530
137
2XT 980 588-471
87
4650
122
8223
136
8531
137
2XT 980 588-631
87
4652
122
8224
137
8532
137
2XT 980 588-641
87
4653
122
8230
137
8535
137
2XT 980 588-651
87
4654
122
8231
137
8540
137
2XT 980 588-661
87
4720
121
8232
137
8541
137
2XT 980 588-671
87
4721
121
8235
137
8542
137
4722
120
8240
137
8543
137
4723
120
8241
137
8544
137
4724
121
8242
137
8545
137
4901
115
8243
137
8546
137
:: 3
Page
3053
132
4901BULK
115
8244
137
8547
137
3054
132
4902
115
8245
137
8548
137
3055
132
4911
115
8246
137
8549
137
3056
132
4911BULK
115
8247
137
8560
137
3057
134
4912
115
8248
137
8561
137
3058
134
4920
115
8249
137
8562
137
3059
132
4921
115
8260
137
8563
137
3060
132
4973
135
8261
137
8573
137
3061
135
4973-BULK
135
8262
137
8718
139
3062
135
4973-M
135
8263
137
8719
139
3064
135
8272
131
8720
124
3065
135
8273
131
8720-S
124
3076
133
8282
136
8721
124
3077
133
8284
137
8721-S
124
3078
133
8333UV
138
8722
124
3078-BULK
133
8334UV
138
8722-S
124
3079
133
8335UV
138
8724
124
3079-BULK
133
8725
125
134
Page
138
3080
:: 6
8336UV 8341
138
8736
139
3080-BULK
134
6100
118
8341UV
138
8737
139
3081
134
6100-W
118
8342
138
8738
139
8739
139
:: 5 5XA 998 572-001
Page 119
149
Index by Part Number
8740
139
9AB 959 505-562
94
9.2394.09
113
8741
139
9AB 959 505-912
94
9.2642.02
144
8771
139
9AB 959 585-012
94
9.2643.02
144
8771MINI
139
9AB 959 585-022
94
9.2859.02
44
8772
139
9AB 959 585-032
94
9.2862.01
53
8772MINI
139
9AB 959 585-202
94
9.2862.02
53
8773
139
9AB 959 585-312
94
9.2862.03
53
8773MINI
139
9AB 994 554-002
94
9.2862.06
53
8774
139
9AB 994 554-012
94
9.2862.08
53
8774MINI
139
9AB 994 554-022
94
9.6008.05
47
8775
139
9AB 994 554-032
94
9.6008.06
47
8775MINI
139
9AB 994 554-062
94
9.HM4980.05
130
8776
139
9AR 994 554-211
94
9.HM4980.06
130
8776MINI
139
9AR 998 019-001
94
9.HM4980.07
130
8777
139
9AR 998 019-011
94
9.HM4980.09
130
8777MINI
139
9AR 998 685-061
94
8832UV
138
9BG 959 565-017
92
8GH 998 529-001
51
9BG 959 565-037
92
8GH 998 529-001
144
9BG 959 565-067
92
8GH 998 529-011
51
9EL 122 562-081
29
8GH 998 529-011
144
9EL 122 562-081
50
8HG 959 952-012
94
9EL 122 562-091
29
8HG 959 952-022
94
9EL 122 562-101
29
:: E
Page
8HG 959 993-102
94
9EL 122 562-111
29
EA1210
143
8HG 959 993-112
94
9EL 127 083-071
30
EA1225
143
8HG 959 993-512
94
9EL 127 083-071
51
EA2410
143
8HG 959 993-522
94
9EL 127 083-081
30
EA2425
143
8HG 959 993-532
94
9EL 127 083-091
30
8HG 959 993-542
94
9EL 127 083-101
30
8HG 959 993-602
94
9EL 127 083-111
30
:: G
8HG 980 917-101
21
9EL 990 156-001
27
G1210
143
8HG 980 917-111
21
9EL 990 157-001
28
G125
143
8HG 992 157-021
28
9EL 990 157-011
28
G2410
143
8HG 992 157-031
28
9EL 990 159-001
27
G245
143
8HG 992 158-001
28
9EL 990 159-011
27
8HG 992 158-011
28
9EL 990 160-001
27
8JA 958 990-001
128
9EL 990 160-001
27
:: H
Page
8JA 958 990-101
128
9EL 990 160-011
27
H122
144
8JA 958 992-001
128
9EL 990 160-021
27
HL124
144
8JA 958 992-101
128
9EL 990 160-031
27
HL126X
144
8JB 958 991-001
128
9EL 990 161-001
27
HL244
144
8JB 958 991-101
128
9GD 111 684-001
26
HM4980
130
8JB 958 993-001
128
9GH 992 157-041
28
HM4981-P
130
8JB 958 993-101
128
9GH 992 157-051
28
HM4981-S
130
8KW 958 990-801
128
9HD 959 027-002
94
HM4982-P
130
8KW 958 990-901
128
9HD 959 027-012
94
HM4982-S
130
8KW 958 992-801
128
9HD 959 028-012
94
HM4983-P
130
8KW 958 992-901
128
9NM 958 988-402
17
HM4983-S
130
9.1517.08
44
HM4984-P
130
9.1520.07
54
HM4984-S
130
9.1524.06
54
HM4985-P
130
9.1531.01
46
HM4985-S
130
:: 9
150
Page
:: D D2S
Page
:: L
Page
L125
143
L245
143
:: N
Page
N1219
143
:: R
Page
R1218
143
R1221
143
R2418
143
R2421
143
:: S
Page
S1221/5V
143
144 :: T
Page
95907360
91
9.1533.01
47
HM4986-P
130
95907365
91
9.1534.01
43
HM4986-S
130
95907370
91
9.1534.03
43
HM8298
131
95907375
91
9.1535.03
43
9AB 959 505-202
94
9.1535.08
43
9AB 959 505-312
94
9.1536.01
43
:: K
Page
9AB 959 505-402
94
9.1538.01
43
K1210
143
9AB 959 505-502
94
9.1539.01
49
K2410
143
9AB 959 505-522
94
9.1540.01
48
TL8W/336J
:: Y
Page 144
Page
YC12100
144
YC1255
144
YC2470
144
YL125
144
YM1210
144
YM1220
144
YM125
144
YM2410
144
YM2420
144
:: X
Page
XN4000
144
XN4000CM
144
XN4000WX
144
Port Fitzroy, Great Barrier Island, New Zealand
Hella marine Australia Phone 1800 061 729 Email custservice@ha.hella.com
New South Wales 3/33 Daking Street North Parramatta NSW 2151
World leading LED lighting technology. State of the art design and precision manufactured. Power saving, ultra durable and ultra safe.
Phone (02) 9890 3722 Fax (02) 9890 3855
Queensland Unit 2/20 Smallwood Place Murarrie QLD 4172
www.hellamarine.com
Phone (07) 3899 8188 Fax (07) 3899 8755
South Australia 2 Portrush Road Payneham SA 5070 Phone (08) 8365 1195 Fax (08) 8365 1824
Victoria (Head Office) 54-76 Southern Road, Mentone VIC 3194 Phone (03) 9581 9333 Fax (03) 9585 2654
Western Australia 1 Colin Jamieson Drive Welshpool WA 6106
152
Formula Icon 54 www.formulacruisers.co.nz
S-HMCATHA04
Phone (08) 9351 9900 Fax (08) 9351 9955