Crown Cutting & Filling Removal.
Perfect removal of crowns & fillings.
Work in intervals
4ZR & 4ZRS - All Ceramic Crowns
Special Diamond Bonding
• Split crowns with 4ZRS (Jack)
• Use red band contra-angle
• Grind down any remaining fragments with 4ZR 35% OFF
Buy any 3 combination of Crown Cutters or Filling Removers and Get 35% OFF
• Optimum speed to 160,000rpm but recommend reducing to 120,000 rpm when working on alloys
• Angle the bur at 45°
• Always work with efficient cooling (at least 50ml/min)
• Low contact pressure no more than 2N
H4MCL - VMK / PFM Crowns
Innovative Toothing
• Unique toothing - large chip space with strong blades
• Tip transversing blade, enables axial drilling
Depth Marker. Perfect Veneer Preparations.
VeneerTechnique
One of the preconditions for clinical success of veneers is a systematic, conservative preparation. On one hand, a certain amount of material needs to be removed, and on the other hand, care has to be taken not to penetrate too deeply into the enamel.
Depth Marker for veneer technique, Cylinder
Cutting depth = 0.3mm
Working length - 6.0mm
Cutting depth = 0.5mm
Working length - 6.0mm
Depth Marker for veneer technique, Tapered
Cutting depth = 0.3mm
Working length - 7.0mm
Cutting depth = 0.4mm
Working length - 7.0mm
D834314021X5
D834314016X5
D868B314018X5
D868B314020X5
Ensure precise enamel reduction and create a smooth, natural looking surface during interproximal reduction (IPR), aligner treatment with Komet's diamond strips.
• 3.75mm wide
• Stainless Steel Diamondstripsarealsogreatforinterproximalfinishingoncompositerestorations.
• Contains the popular Lab burs H77E & H251EF burs for Acrylics, Plaster & Metal Alloys.
• Six Polishers - two each of the 9603 Coarse (Green), 9641 Medium (Brown) & 9644 Fine (Yellow)
• Polishers respectively for pre-polishing, polishing & high-shine polishing of denture acrylics
• Extraoral use.
• Optimal recommended speed = 6,000 RPM.
Komet offers a wide variety of bone cutters made of Tungsten Carbide and we have selected 4 of our most popular designs that are available in extra long surgical handpiece shank “106”. These surgical burs are 70mm in length and the instrument shapes were designed to suit the requirements of different indications.
The high quality instruments made by Komet are synonymous for outstanding clinical results and minimally invasive, efficient preparations.
• Kavo 3610N3 Intra
• NSK SGA/SGS
• W&H S-10 or S-12
