One single procedure for your crown cementations
Zirconia, Lithium Disilicate or Metal. No primers required. One single procedure regardless of the restorative material.
Conditioning the prosthetic restoration
Follow the instructions for use of the restoration material. In the absence of specific instructions. we recommend the following procedure: or
NO PRIMERS REQUIRED Simple, Clean and Versatile
• Before using this product, be sure to read the Instructions for Use supplied with the product.
• The specifications and appearance of the product are subject to change without notice.
• Printed colour can be slightly different from actual colour. “PANAVIA”,“AVENCIA” and “CLEARFIL” are trademarks of KURARAY CO., LTD
Universal
・ White Translucent Content 1 syringe: Paste A and B 8.2 g (4.6 mL), Mixing Tip 20 tips * Refer to
restoration”.
(A2)
“Conditioning the prosthetic
Chemical 2-4 min. Light 2-5 sec. www kuraraynoritake com * For a translucent restoration, light-cure. Automix 5 min.
Hydrofluoric
Blast 0.1
Blast 0.1
Conditioning the crown. Place the crown.Light-cure for 2 to 5 seconds or chemical-cure for 2 to 4 minutes, then remove the excess cement.
Metal oxide ceramic (e.g. Zirconia), Composite resin Lithium Disilicate Metal Blast with alumina powder (30 50 µ m), then ultrasonic clean and dry. Apply hydrofluoric acid, then rinse with water and dry. Blast with alumina powder (30 50 µ m), then ultrasonic clean and dry.
acid
- 0.4 MPa
- 0.2 MPa
or
OST-027 IM19-01 07/2019 Website www.kuraraynoritake.com 1621 Sakazu, Kurashiki, Okayama 710-0801, Japan
“KATANA” is a trademark of NORITAKE CO.,LIMITED.
The MDP and LCSi monomer new chemistry:
・ Provides high bond strength
・ Eliminates additional steps
Zirconia, Enamel and Dentine.
Easy Cementation Without Additional Primers
The Original LCSi monomer creates a strong chemical bond to Porcelain, Lithium Disilicate and Composite Resin.
Two options of polymerisation, the same easy clean-up result.
Say goodbye to complicated bonding protocols and simplify your work flow.
Easy clean-up that is gentle to the gums and minimises the risk of accidental ingestion.
Self-cure 2 to 5 seconds 2 to 4 minutes
SIMPLE, CLEAN AND VERSATILE
MDP Monomer: High Bond Strength When the cement is used in combination with CLEARFIL™ Universal Bond Quick, the setting time of the excess cement will be faster (1 to 2 seconds).
Clean: Fast & Easy Clean-Up Original
Prosthetic Restoration Abutment Side Cement No primer required Tooth Enamel and Dentine Composite Resin Metal Both Base and Noble Metal
Tack-cure by light
Film thickness Radiopacity
Room Temperature F-ion release
Restorative Materials Data source: Kuraray Noritake Dental Inc. CLEARFIL™ Universal Bond Quick can be used on the tooth structure to enhance the bond strength for cases with poor retention. 30 25 20 15 10 5 MPa Shear Bond Strength to Tooth Structure 0 50 40 30 20 10 0 PANAVIA™ SA Cement Universal with CLEARFIL™ Universal Bond Quick PANAVIA™ SA Cement Universal KATANA™ Zirconia HT Lithium Disilicate Porcelain KATANA™ AVENCIA™ Block Ti Co-Cr. Gold Alloy MPa Enamel Dentine No primers or additional steps required
Storage at
Shear Bond Strength to
