Modern dentistry has always been propelled forward by new technologies, and the latest disruptor has come in the form of 3D printing with resin materials.
In this lab vision flyer, access the tools you need to revolutionise your dental lab with 3D printing and provide accurate, efficient, patient-customised solutions, all created with specialised dental resins built for biocompatibility, durability, and aesthetics.
Is
advances?
Take your dental lab to the next level with the AutoScan-DS-EX Pro(H) from SHINING 3D, available through Henry Schein in the UK. This advanced 3D dental scanner delivers outstanding accuracy and speed, allowing you to capture every detail with ease.
Why Choose AutoScan-DS-EX Pro(H)
• Precision you can trust: Achieve ultra-high accuracy for exceptional results.
• Rapid performance: Enjoy lightning-fast scanning to enhance workflow efficiency.
• Affordable excellence: Get top-tier quality without the premium price tag.
• Worry-free support: Benefit from a two-year warranty and priority helpdesk assistance.
• Elevate your lab: Where quality meets affordability with a range of indications.
Want a quick, accurate impression scanning solution, optimised for productivity? The time has never been better to bring your lab to the next level with an E3 Red scanner.
High performance and implant bar accuracy
Restorative
• Camera: 2 x 5 MP.
• Accuracy (ISO 12836): 7μm.
• Scan speed (full arch): 22 seconds.
• Scan speed (full arch impression): 80 seconds.
• Texture: Colour.
• Scanning strategy: Standard.
High performance and colour
Orthodontics
• Camera: 2 x 5 MP Blue LED Multiline.
• Accuracy (ISO 12836): 7μm.
• Scan time (plaster model): 33 seconds.
• Scan time (impression): 52 seconds.
• Texture: Colour.
5-axis dry milling. Plug & Mill: Unpack, connect, start milling!
• The E5 requires no compressed air, therefore you have maximum freedom in the choice of the installation site and also benefit from minimal operating costs.
• The open system architecture of the E5 makes your entry into the digital production of dental restorations quick and easy, and fits perfectly into your workflows.
• The integrated CAM software enables you to get started right away!
• Process up to 6 blocks of different sizes with minimal effort.
• Automatic tool changer can accommodate 16 standard tools and an AIRTOOL.
• Mill zirconia, composites, PMMA, wax, and CoCr sintering metals for a wide range of indications.
* Available over a 12 month term
The PrograMill PM7 offers you a future-proof high-end solution for the precise and efficient production of dental restorations.
• Hybrid operation: automatic change between wet and dry operation.
• Integrated ionisor and automatic cleaning function.
• 20-position tool changer for independent processing.
• Fully automatic materials management.
• Intuitive user interface for convenient operation.
Zirlux Complete allows for a full accompaniment of indications ranging from single unit restorations to multiple units for rehabilitation cases.
A consistent blend of shading elements combined with a cold isostatic pressing manufacturing process creates a highly aesthetic ceramic.
• 1000MPa.
• High strength for most indications.
• Wider range of applications in a single source zirconia.
• High strength with low opacity.
• Multilayered disc <47% translucency.
• Smooth transitional blend of shading characteristics.
• Highly aesthetic.
• Compatible with most open 98.5 CAD/CAM milling machines.
Zirlux Esthetic TR has the unique characteristic of total gradation. From £55
As the restoration moves from the cervical to the incisal, translucency becomes the more desired characteristic. This gives the material a much better aesthetic quality and contributes to the natural look.
• 727MPa incisal blended to 1000MPa cervical.
• Approved for most indications.
• Higher strength along the cervical area.
• Higher translucency along the incisal edge.
• Multilayered disc <48% translucency.
• Mirroring effect to match adjacent dentition.
• Easy handling.
• Highly aesthetic.
• Compatible with most open 98.5 CAD/CAM milling machines.
• Chameleon effect to adapt to the neighbouring teeth.
• Polychromatic ingot used for pressing anterior and posterior crowns, veneers as well as hybrid abutment crowns, quickly and efficiently Monolithic LS2 restorations showing a lifelike shade progression.
• No need for time-consuming layering methods, results are achieved in a single press sequence with subsequent glazing.
For product codes and full details, visit henryschein.co.uk
Buy 4 get 1 of the same product for FREE
• High translucency ingots ideally suitable for being pressed to full contour (staining technique).
IPS
• Low translucent ingots ideally processed using the cut-back technique as well as the staining technique.
IPS
• High opacity ingots suitable for the fabrication of frameworks on severely discoloured preparations or titanium abutments.
• Dark sub-surface is masked producing highly aesthetic results.
IPS e.max®
• Monochromatic ingots suitable for the press technique. Medium translucency intended for restorations that require a higher level of translucency than LT restorations and a higher brightness level than HT restorations.
IPS e.max®
• Medium opacity ingots ideally suited for the fabrication of frameworks on vital or slightly discoloured preparations.
For product codes and full details, visit henryschein.co.uk
For CEREC®/inLab.
• An innovative lithium disilicate glass-ceramic (LS2) for CAD/CAM chairside applications.
• Combines highly aesthetic quality with exceptional user-friendliness.
For CEREC®/inLab.
Blocks for use in the fabrication of aesthetic, high-strength, single tooth restorations such as veneers, inlays, crowns and partial crowns.
• Offers decreasing levels of opalescence coupled with increasing brightness values from 1 to 2: ideal for enamel replacement.
For product codes and full details, visit henryschein.co.uk
For inLab.
• Medium translucency blocks suitable for fabricating restorations with the staining and cut-back technique.
• Made from lithium disilicate glass ceramic material with a flexural strength of 360MPa.
For product codes and full details, please visit henryschein.co.uk
Clinically proven for over 10 years[3-5]
IPS e.max® CAD has been proven clinically for over 10 years. The durability of the blue block has been confirmed in daily clinical practice [3-5]. The probability of fracture after 15 years of a premolar crown made from IPS e.max® CAD is less than 1% [14]
Over 10 years of continuous quality testing shows: IPS e.max® CAD provides a high level of biaxial flexural strength of 530 MPa [13] . The values for biaxial strength as well as those for fracture toughness of 2.11 MPa • m1/2 [15] make dentists and patients happy.
The right block for every patient
Flexible work is possible thanks to a comprehensive range of IPS e.max® CAD blocks. The excellent shade adaption due to the wide range of shades and translucency levels ensures maximum aesthetics. IPS e.max® CAD restorations have already been placed a million times over[1]
Efficient fabrication
IPS e.max® CAD enables efficient and fast workflows. Together with our smart solutions based on the blue block, it provides everything you need for treatment in a single visit and speeds up your daily practice routine.
[1] Based on international sales figures.
[3] Fasbinder et al., Study report, 2017b.
[4] Rauch A et al., Clin. Oral Investig. 2018, 22, p. 1763-1769.
[5] Boldt J, Spitznagel F. A, Dtsch. Zahnärztl. Z. 2017, 72 (4), p. 319-325.
[13] Mean biaxial flexural strength, result following more than 10 years of continuous quality testing, R&D Ivoclar, Schaan.
[14] Taking FEM simulations and SPT (Strength-Probability-Time) diagrams into consideration, R&D Ivoclar, Schaan.
[15] Hill T, Tysowsky G, AADR/CADR Annual Meeting: 1672, 2016.
Buy 5 get 1 of the same product for FREE
Precision revolution.
The most accurate SprintRay printer of all time.
Integrates with SprintRay Cloud Design AI to help you deliver night guards with improved fit and finish.
Dentures with outstanding translusency
Precise full-arch and quadrant guides.
Same-day implant dentures with passive fit.
Models for aligner production and study.
S Fast, reliable, and connected. ProCure 2 Post-processing, simplified.
Cleans and dries your 3D printed models in 9 minutes.
Optimised wash profiles and motor dynamics improve wash efficiency for all types of resin.
Cloud-connected for automatic job handoff from print to cure.
Dedicated drying hardware and sensors. Drying fan channels air directly into the wash chamber to prepare parts for curing.
Increasing the efficiency of your workflow leads to better outcomes.
ProCure optimises the post-curing step for clinicians to offer the best output in the shortest time, all at the touch of a button.
High Capacity - 30 full arches.
Dynamic Heating - Sensor-controlled chamber.
Rapid & Thorough Curing - 90 watt LED arrays 365nm + 405nm.
Predictable, reliable, smart.
Engineered to deliver production continuity in any environment.
Active layer monitoring.
4K imaging delivers extraordinary resolution over a large build envelope.
Auto-calibrating UV LED combines the latest generation of high-power ultraviolet solid-state light sources with an integrated radiometer.
Achieve the highest standard of reliability with DLP Micromirror Technology.
3D print precision meets volume.
Unrivalled 3D print monitoring technologies.
3D printer combining 4K imaging technology with Asiga’s well-proven Smart Positioning System (SPS™) to produce a build volume 3 times larger than other desktop 3D printers.
4K Super Fast Print mode incorporates pixelshifting technology to increase part accuracy and surface definition without affecting printing time.
Highly accurate resin specifically formulated for the creation of custom denture bases of all types.
1205880 Orange Pink 1kg
1205879 Light Pink 1kg
Resin for the generative production of long-term temporary dental restorations basedon image projection systems.
Bottle 1kg
1205881 A1
1205882 A2
1205883 A3
1205884 A3.5
1205885 B1
1205886 B2
1205887 Bleach
Fast, durable implant guide material featuring improved flexural strength and modulus (when compared to Surgical Guide 2).
• Higher flexural strength prevents the model from breaking during normal use.
• Lower viscosity values make resin easier to mix.
1212523 1kg
1210793 Night Guard Flex
• Biocompatible 3D printing material featuring high-impact strength and flexure at body temperature, for comfort and longevity.
1205890 Castable Red
• Light-curing castable resin, on methacrylate resin basis.
FotoDent tray 2
Optimised biocompatible resin for the fabrication of individual dental impression trays.
• High reactivity with low viscosity.
• Simplified cleaning and improved mechanical properties.
• Faster printing times, with layer thicknesses of 300m possible.
• Finished impression trays have a homogeneous surface which significantly reduces manual reworking.
Dental modelling material with improved flexural modulus and strength.
• Prints up to 8 full arch models in just 15 minutes.
1203410 Grey 1L
1203411 Tan 1L
1203412 Study Model II White 1L
KeyModel Ultra™
For next-gen dental and orthodontic models.
• Ultra-fast printing and flawless detail.
• Thermoforming quick-release agent.
• Carvable without chipping.
• Pairs perfectly with KeyMask™
1201984 Ivory 1kg
1201985 Light Grey 1kg
Dental resin for the production of accurate dental models and dental models with removable dies.
• Printer compatibility: 385nm and 405nm.
• Almond colour.
1195711 DentaMODEL 1kg
DentaSTUDY
Material for diagnostic and orthodontic study models.
• Printer compatibility: 385nm and 405nm.
• White colour.
1203987 DentaSTUDY 1kg
Biocompatible material for producing indirect bonding trays.
1213586 1kg
Biocompatible material for custom impression trays. 1213585 1kg
Material providing anti-stick surface release chemistry, making it ideal for vacuum thermoforming.
• Printer compatibility: 385nm and 405nm.
• Grey colour.
1203986 DentaFORM 1kg
Direct casting material for partial frameworks and crown and bridge pressing/casting.
• Printer compatibility: 385nm and 405nm.
• Green colour.
1195713 DentaCAST 1kg
Material for dental try-ins and custom impression trays.
• Printer compatibility: 385nm.
1204635 DentaTRY A1 1kg
1204636 DentaTRY A2 1kg 1204637 DentaTRY A3 1kg 1204638 DentaTRY B1 1kg 1204639 DentaTRY B2 1kg 1204640 DentaTRY B3 1kg Call us today for our latest offers 0800 032 8018
0800 032 8018
Light-curing liquid for 3D printing.
• Helps to improve implant workflows and produces models with flexible, natural-looking gingiva masks.
• Features a shore A hardness of 62 and is comparable to conventional materials, allowing technicians to adopt digital processes yet still enjoy the same characteristics of traditional materials.
Light-curing Class IIa liquid for 3D printing.
• Used to produce short-term try-ins or long-term temporaries (up to 1 year).
• Covers exposed dentine, minimising or completely preventing sensitivity.
1kg
1213605 A1
1213606 A2
1213607 A3 1213608 A3.5
1213609 B1
1213610 B2 1213611 BL1
Light-curing Class IIa liquid for 3D printing.
• Helps the user to create duplicate dentures in a fast, easy process to provide back-up dentures for travel or emergencies, for example.
• Fast production time of just under 2 hours.
1kg
1213614 Try-In White
1213615 Light Reddish Pink
1213616 Light Pink
1213617 Original Pink
1213618 Dark Pink
Light-curing liquid for 3D printing.
• Developed to match the look and handling properties of grey gypsum for the production of models.
• An excellent choice for technicians with the highest aesthetic demands, such as ceramists.
Cater to a local niche market and keep athletes smiling!
• Strongly recommended for contact and collision sports (e.g. martial arts, boxing, wrestling, rugby, handball, american football, water polo etc).
• Also recommended for activities with less contact (e.g. skateboarding, baseball, horse riding etc).
1kg 1kg
Light-curing Class IIa liquid for 3D printing.
• Helps the user to create duplicate dentures in a fast, easy process to provide back-up dentures.
• Fast production time of just under 2 hours.
1213612 Blue 1213613 White 1kg
1213619 A1
1213620 A2 1213621 A3
1213622 A3.5
1213623 B1
1213624 B2 1213625 BL1
Streamline your workflow. A high-temperature furnace, ideally suited for sintering bridges and crowns made of translucent zirconia.
• The special heating elements made of molybdenum disilicide provide very good protection against chemical interaction between the charge and the furnace components.
• The bridges and crowns are loaded in ceramic saggars.
• Can be individually programmed for all recommended sintering curves by almost all zirconium manufacturers.
• Tmax 1650 °C.
• Furnace chamber with a volume of 1 litre.
• Exhaust air opening in the roof.
• Type S thermocouple.
Specification
Dimensions: (W) 385mm x (D) 425mm x (H) 720mm
Volume: 1 Litre
Weight: 28kg Call us
1195005
Water-bath polymerisation device for cold and heat curing dental acrylic
One water-bath polymerisation device for all.
• New, space-saving design, but it’s actually bigger inside.
• Features a wider opening and greater capacity than the previous model, so even articulators can fit inside.
• Proven pressure lock system.
• Quick, precise temperature control.
• Wide range timer (up to 9 hours 59 minutes and perpetual loop).
1195258 Palamat Premium 230/240V
Furnace with a compact design for the daily lab routine.
Equipped with the QTK2 muffle technology, which is responsible for the homogeneous heat distribution in the firing chamber, leading to optimum firing results.
Features
• Operating unit features membrane-sealed keypad with coloured touch screen for simple, quick and intuitive operation of the furnace.
• Cooling tray provides more storage surface for fired objects and optimised cooling in the marginal area.
• IoT function: the user is informed about service works at an early stage to prevent furnace failures.
• USB and Ethernet interface allow the furnace to connect to the PC/Internet at any time to perform software updates.
• Power-saving technology.
• Includes numerous Ivoclar programs to ensure immediate use of the furnace without programming.
• 300 individual program settings available.
1202358
3 Year Warranty
2 Year Warranty
Your smart specialist for high-quality firing results. The integrated thermographic camera is sensitive to infrared radiation and measures the temperature directly at the surface of the objects being fired.
The furnace head and the heater are controlled with the infrared camera to ensure that the predefined pre-drying temperature is consistently maintained on the objects in the furnace.
Features
• QTK2 muffle technology with SiC bottom reflector.
• Digital shade assistant (DSA).
• Power Fail Save System.
• Automatic double-range temperature calibration (ATK2).
• LAN and USB ports.
• Standby key to reduce power consumption.
1202359
Premium furnace equipped with intelligent Programat infrared technology for a considerably enhanced process reliability and high-quality firing results.
Features
• Infrared thermal imaging camera automatically controls the pre-drying and closing process.
• Digital Shade Assistant enables users to determine the tooth shade.
• Bluetooth-enabled mobile phone can be connected to the furnace.
• Hands-free function.
• 7-inch colour touch screen with membrane-sealed keypad.
• Multimedia data can be transferred to the furnace with an SD card reader or USB flash drive.
1202360
Compact combination furnace that can be used as both a press and ceramic furnace.
Features
• FPF function for fully automatic pressing, and QTK2 muffle technology with SiC bottom reflector.
• Electronic press drive with force sensor produces high-quality press results, with no compressed air connection required.
• Easy and precise temperature calibration at 2 reference points (ATK2).
1202361
Your reliable partner for smart pressing procedures
Premium combination furnace with integrated thermal imaging camera that can be used as both a press and ceramic furnace, and is optimally coordinated with Ivoclar Vivadent press ceramic materials.
Features
• Fully automatic press function (FPF).
• Automatic double-range temperature calibration (ATK2).
• Software update via USB flash drive.
• Crack Detection System (CDS).
• Convenient loading of the chamber.
• Stand-by key reduces power consumption. 1202362
Faster, more predictable and highly individualised results!
GC Europe is proud to present its newly developed Initial Zirconia Coloring Liquid system, a water-based colouring liquid system for the complete or partial colouring of pre-sintered zirconia restorations.
Benefits at a glance:
• For complete or partial characterisation of zirconia frameworks, either by painting or dipping.
• Create Biomimetic shaded substructures and minimise the work for you and your ceramics.
• Enhanced aesthetics by customisation of the pre-sintered zirconia structure.
• Faster, more predictable and highly individualised results.
Liquid Set
Ultimate frame customisation
Precisely controlled and localised colour penetration
Reduces the need for postsintering colour adjustments.
Buy any 4, get 1 x pink shade FREE
Intro Kit
Paint it or dip it - two ways to accomplish...
Deep, even colour distribution
Consistent and reproducible results in a fast and easy manner.
Light-cured characterisation coating for indirect composite and acrylic restorations.
• Wide variety of colours available.
• Adds natural gloss and brilliance.
• Thin, 25-50µm coating layer.
• Long-lasting gloss.
• High discolouration resistance.
• High wear resistance.
• Excellent bonding durability.
Complete Set
1137264 Stains 15 x 2.6ml (A Plus, B Plus, C Plus, White, Ivory White, Yellow, Orange, Pink-Orange, Red-Brown, Olive, Grey, Blue, Lavender, Pink, Red); Stains 2 x 5ml (Clear, Clear HV); Mixing Container; Flat Brush; Round Brush
High-strength, nanohybrid, light-curing composite offering brightness, translucency, chroma and a natural opalescence that is similar to porcelain.
Wide range of clinical applications: from metal-free inlays, veneers and jacket crowns to frame-supported crowns and bridges, and implant superstructures.
High density and homogeneously dispersed ultra-fine fillers offering high mechanical properties achieved by light-curing only.
High wear-resistance, compacted surface and surface smoothness that delivers durability and high gloss retention.
Lustre Paint colours provide a simple way to add long-lasting colour and surface gloss as well as a high wear-resistance and protection.
This chart is intended as a reference guide only For product codes and full details, visit henryschein.co.uk
Light-curing composite with micro-opal fillers.
• Indications: framework-supported - partial or full veneers on metal-supported restorations, pressing over of frameworks using SR Nexco Flask, prosthetic gingiva portions for implant superstructures.
• Indications: framework-free - inlays/onlays/ veneers, anterior crowns, characterisation/ modification of composite and resin denture teeth.
• Durable shade stability and lasting gloss through polymerisation process.
• Homogeneous and quick shade reproduction due to layer thickness tolerance.
• Optical properties of the micro-filler material offers natural aesthetics.
1125518 A1
1125519 A2
1125520 A3
1125521 A3.5
1125522 A4 1125523 B1 1125524 B2 1125525 B3
1125526 B4
1125527 C1
1125528 C2
1125529 C3
1125530 C4
1125531 D2
1125532 D3
1125533 B4
1125534 BL3
1125535 BL4
Buy 3 (any shade), Get 1 x SR Nexco Liner 2ml Incisal FREE
SR Nexco Incisal Paste 2.5g
1125536 IL 1125537 I2 1125538 I3
1125539 I4 1125541 BL
For composite restorations.
• Medium viscosity.
• Rigid final set.
• 100% light penetration.
• Gun delivery.
1069206 Cartridge 50ml
For recreating gingival tissue and providing the emergence profile.
• Ideally complimented with zetalabor lab putty.
Buy 2 (any shade), Get 1 x SR Nexco Gingival Opaquer 2ml FREE
1045606 Cartridge 50ml x 2, Separator 10ml, Small Mixing Tips x 12 and Oral Tips x 12
Gingival reproduction for implant prosthetic models.
• Indicated for direct technique.
• Easy to trim: permits accurate margin definition.
• Precision and dimensional stability.
Standard Pack
1045607 Cartridges 48ml x 2, Separator 10ml, Mixing Tips x 12 and Oral Tips x 12
An innovative, versatile clear silicone material made to fulfil the demand for high aesthetics while faciliating the way to great results.
• Indications include injection moulding technique, temporary crown and bridge work, layering of composite, bite registration, transfer of brackets from the model to the mouth, and transfer of fibres from the model to the mouth.
• Amazing transparency makes it particularly effective in complex clinical situations like wear cases, complex morphologies and challenging aesthetic cases.
1192269 Cartridge 51g x 2
Addition silicone for duplication in a laboratory.
Easily mixed lab putty.
5kg
959221 A85 1:1 x 2
Alublast
High-grade corundum for devesting activities.
• Ideal for removing investment and casting oxidations on steel and chrome-cobalt.
• Achieves a satin-finish on all metals.
• It features hardness, sharp effect, renewing cutting edge and high resistance to wear.
900901 Putty 1.3kg and 40ml Activator 900905 Activator 40ml
1074767 Putty 7.5kg
Addition vulcanising duplication silicone.
• Superior reproduction of details and consistency of shape.
• Virtually shrinkless due to its platinum hardener system, so it is not necessary to pour out model immediately.
Type IV thixotropic superhard stone.
• Exhibits excellent scratch resistance.
• Water:powder ratio - 22ml:100g.
• Working time: 6 mins.
• Setting time: 13 mins.
• Setting expansion after 2h: 0.09%.
• Compression strength after 1h (MPa): 55.
• Compression strength dry (MPa): 80.
9002928 Ivory 12kg
Large sized curved rims.
Type III synthetic stone for orthodontic study models.
• Super white.
• Setting time 12mins.
• Expansion 0.20%
• Wet compressive strength (MPa) 20.
9002927 11kg
Type IV synthetic die-stone with thixotropic consistency.
• High stability with scratch-resistant smooth surfaces.
• Working time 5-6 mins.
• Setting time 12 mins.
25kg
9008507 Sahara
9009629 White
Type III hard plaster for dentures, master, situation and counter bite models.
• Maintains contour when cooled. Call us today for our latest offers 0800 032 8018
20kg
959224 Blue
959226 Yellow
Type IV dental die stone for producing fine, smooth dies and working study models.
• Extremely hard stone for greater wear resistance.
• Recommended for use in extensive crown and bridge work and prosthetics requiring high accuracy of fit.
5kg
1086894 Golden Brown
1086897 Topaz Beige 12kg
1086898 Golden Brown
Hard die-stone developed for high performance and sensitive technologies such as extended implant cases and complex, full ceramic indications.
• Improved powder and refined colour setting suitable for a variety of indications.
4kg 1175460 Pastel Yellow 1175462 Polar White 1175463 Inca Brown 1175464 Titanium Grey 11kg 1175461 Pastel Yellow
Light-curing plates for the production of individual impression trays.
• Radiolucent.
958314 Pink x 50
For the production of custom impression trays.
• Quality light cured special tray material.
• Provides good handling characteristics.
• Non sticky and non slumping.
Upper x 50
1018538 Blue
1018540 Pink
Biocompatible Class IIa light-curing material for temporary crowns and bridges, free of methyl methacrylate (MMA).
• Ideal for printing temporary crowns, bridges, inlays, onlays and veneers, and can easily be glazed and/or characterised with OPTIGLAZE Color.
• The homogeneous dispersion of surface-coated silica fillers contribute to a superior wear resistance.
Spend over £450 on PalaXtreme, Get 1 x Pala Lab Putty FREE
High-impact strength and excellent handling characteristics. The “core shell technology” minimises the risk of fractures. Due to it’s high viscosity this high-impact denture acrylic works perfectly with the pouring or the injection technique.
Core Shell Technology – what is it?
PalaXtreme gets its fracture toughness from the new “core shell technology” – polymer pearls with a flexible core. The flexible core prevents the pearl from breaking and acts as a shock absorber to prevent any microscopic damage from spreading to other pearls.
High-impact self-curing denture acrylic for special applications, such as implant-based dentures.
• Core shell technology minimises the risk of fractures.
• Works excellently with pouring or injection techniques due to its high viscosity.
• Helps to prevent impact damage and therefore avoids time-consuming warranty repairs.
• Contains a very low level of residual monomers (1.4%).
With their multilayered, life-like aesthetic Artic permits perfect adaptation to existing dentition and is compatible for most dentures.
• Easy adaptation to existing dentition.
• Available with 3 posterior angulations.
• Optimum intercuspation.
Available in an additional shade for an increased masking effect. Call us today for our
Heat-curing denture base material for the conventional packing technique.
For the fabrication of hard occlusal splints, bases for removable dentures, and orthodontic appliances.
Smooth consistency.
Three different polymerisation methods.
Self-curing denture base material suitable for the pouring and packing technique. For the pouring or packing technique. Used for the fabrication of hard occlusal splints, bases for removable dentures, and orthodontic appliances.
Excellent flow and moulding properties.
Flexible heat-curing denture base material
There are three different methods to polymerise the ProBase Hot material. You can choose the method that best suits your needs.
Two materials – one shade
No matter whether you decide to use ProBase Cold for one jaw and ProBase Hot for the other in the same denture case - the shades will always match up.
Polymer 2 x 500g
1069944 Pink-V
Clear
1069942 Monomer Polymer 500g
1069946 Monomer
1069947 Pink 1069948 Clear
1072096 Pink-V
A dream come true for the pouring technique
The cleverly balanced flow and modelling properties of ProBase Cold allow you to fabricate removable partial dentures in an easy and controlled manner.
Make use of the broad range of shades and uniform shade standards to create dentures that match harmoniously.
Sealable polythene bags. Plain x 100 105001 127 x 190mm (5 x 7.5”)
101 x 140mm (4 x 5.5”)
x 100
Ruby-coated cutting tool for acrylics.
• Precise trimming of acrylic dentures without heat generation.
• Ideally suited for correction on soft acrylics and relines.
1094708 Cone 8.5mm
Henry Schein Dental, Medcare House, Centurion Close, Gillingham, Kent, ME8 0SB. t 0800 032 8018 e sales@henryschein.co.uk w henryschein.co.uk HenryScheinUK Click to browse all our special offers
- 31/12/2024. Please visit http://www.henryschein.co.uk/gb-en/Dental-GB/LegalTerms.aspx for