Lab Vision 3

PrograMill DRY

PrograMill DRY is a compact 5-axis dry milling machine that allows you to reliably and quickly produce precise zirconium oxide crowns and bridges as well as digital dentures.

Benefits

Compact size. Open system. Material change without tools. High precision and reproducible results. Integrated into the Ivoclar Digital workflow.

inLab MC X5

The ultimate in ‘extra fine’ grinding and milling in just a few minutes!

The open, 5-axis, milling and grinding machine, inLab MC X5, is designed specifically to meet dental lab requirements for cost-efficient production.

• Every aspect of inLab MC X5 has been designed to address the CADCAM needs encountered in dental laboratories. It can be used as a universal production unit for processing zirconium oxide, polymers, composites, wax and metals, as well as glass and hybrid ceramics.

• The innovative multi-block holder can accommodate up to six blocks of different materials, enabling maximum productivity even with multiple single-tooth applications.

• inLab MC X5 can be used for wet or dry production, and also combination production during the same machining operation depending on material and indication.

Integrated intelligence- Pro S senses its environment, tracks its own activity and recognizes what is needed. Instructions and guidance on the dive screen help you and your staff get the most out of the system.

High precision - Factory calibration enhancements and a new glass projector lens improve accuracy and repeatability. Your patients will be delighted with the accuracy of fit.

in Digital Dentistry

efficiency of forward-thinking practices all over the

Wash/Dry

Automated Washing System for

Dental Professionals

10-minute Wash Cycle - Thanks to the efficiencies gained through Mechanical Jetting, SprintRay Pro Wash/Dry can complete a full, two-stage wash cycle in just ten minutes.

Set it and Forget it - Place the SprintRay build platform or included wash basket in the wash cradle and press ‘Start.’ Pro Wash/Dry automatically performs a two-stage wash and dry.

ProCure

Post-processing, simplified.

Increasing the efficiency of your workflow leads to better outcomes.

ProCure optimises the post-curing step for clinicians to offer the best output in the shortest time, all at the touch of a button.

High Capacity - 30 full arches

Dynamic Heating - Sensor-controlled chamber

Rapid & Thorough Curing - 90 watt LED arrays 365nm + 405nm

Unmatched Convenience - Compatibility with most dental 3D printing resins and a 3.5” touchscreen programmed with a range of 1-touch settings.

Easy to Own and Maintain - USB interface allows you to easily add new curing profiles as materials are released. Along with user-replaceable LEDs and solid aluminium panel construction.

world.

A Century of innovation Programat S2

Your modern expert for high sintering accuracy. Compact furnace designed for sintering copings, frameworks and full-contour restorations made of IPS e.max ZirCAD or other zirconium oxide materials, using a temperature of up to 1,600°C. Integrated into the Ivoclar Vivadent workflow, providing optimally coordinated processing steps and consistently high-quality results.

Modern design and intuitive operation

• Optimized firing tray for more space and better cooling

• New membrane-sealed keypad with proven colour touchscreen display

• Extension of OSD display to include the operating status “cooling”

• Efficient and reliable performance due to software optimizations

1202359

Calibration option

Calibrate your Programat S2 furnace easily and quickly using the step-by-step instructions.

Sintering temperature up to 1600°C

The homogeneous heat distribution of the heating elements allow you to achieve optimum sintering results with temperatures up to 1600°C.

Many programming options

With a choice of three heating stages and two cooling stages, the sintering program offers a host of programming options for Ivoclar zirconium oxide materials.

Programat P510 G2

Your smart specialist for high-quality firing results

The integrated thermographic camera is sensitive to infrared radiation and measures the temperature directly at the surface of the objects being fired. The furnace head and the heater are controlled with the infrared camera to ensure that the predefined pre-drying temperature is consistently maintained on the objects in the furnace.

Features

• QTK2 muffle technology with SiC bottom reflector.

• Digital shade assistant (DSA).

• Power Fail Save System.

• Automatic double-range temperature calibration (ATK2).

• LAN and USB ports.

• Standby key to reduce power consumption.

1202359

Programat EP5010 G2

Your reliable partner for smart pressing procedures

Premium combination furnace with integrated thermal imaging camera that can be used as both a press and ceramic furnace, and is optimally coordinated with Ivoclar Vivadent press ceramic materials.

Features

• Fully automatic press function [2] (FPF)

• Automatic double-range temperature calibration (ATK2)

• Software update via USB flash drive

• Crack Detection System (CDS)

• Convenient loading of the furnace chamber

• Stand-by key to reduce power consumption

Modern. Intuitive. Smart.

With the objective to meet the requirements of your dental laboratory.

Modern design

Dynamic colour concept. Ergonomic shapes and forms. Optimised cooling tray for more space and better cooling.

High process reliability

Fast and high-quality firing results due to infrared technology.

IoT function for free monthly equipment usage reports. Preset programs and material groups.

Intuitive operation

New membrane-sealed keypad with proven colour touchscreen display.

New user interface featuring new symbols and icons. Efficient and reliable performance due to software optimisations.

Buy 1 get Vacuum Pump VP5 FREE*

Buy 1 get Vacuum Pump VP5 FREE*

inLab Profire Sintering Furnace

The new inLab Profire sintering furnace for zirconium oxide and non-precious metal restorations integrates proven process technology in a new design.

Features

The integrated colour touch display allows for an intuitive, clear structured user guidance for all functions of the furnace.

Pre-installed programmes as well as the free programming possibility give full flexibility in material choice.

Easy program updates via USB, fast heating rate (up to 120°C/min), programmable autostart function

1197424

Palamat Premium Smaller outside, smarter inside

One water-bath polymerisation device for all.

• New, space-saving design, but it’s actually bigger inside.

• Features a wider opening and greater capacity than the previous model, so even articulators can fit inside.

• Proven pressure lock system.

• Quick, precise temperature control.

• Wide range timer (up to 9 h 59 min & perpetual loop).

1195258 Palamat Premium 230/240V

For use with porcelain or acrylic facings. For every indication of use. Free of nickel, beryllium and cadmium.

Only £2,206.59 Only £600

Save 20%

PalaXtreme®

High-impact & self-curing acrylic

High-impact strength and excellent handling characteristics. The “core shell technology” minimises the risk of fractures. Due to it’s high viscosity this high-impact denture acrylic works perfectly with the pouring or the injection technique.

Core Shell Technology – what is it?

PalaXtreme gets its fracture toughness from the new “core shell technology” – polymer pearls with a flexible core. The flexible core prevents the pearl from breaking and acts as a shock absorber to prevent any microscopic damage from spreading to other pearls.

IvoBase Injector

Fully automated, compact and steamless.

IvoBase Injector permits a fully automated, controlled injection and polymerization procedure of special PMMA resins which are coordinated with the system. The chemical shrinkage of the resin is entirely compensated during polymerization thanks to the patented temperature control in the flask and the heater. This enables the fabrication of denture bases featuring high accuracy of fit and precision. The injector has been especially developed for the IvoBase material and permits excellent restorations. The IvoBase Injector can also be used for the tried-and-tested SR Ivocap material.

Automated process offers reliability

A high quality standard is calculable and easy to achieve: The flask and the material are placed in the unit, the program is selected and started. Users enjoy a consistently high level of quality and precision.

Residual monomer content < 1 per cent

The standard residual monomer content of IvoBase is at the level of heat-cured materials. By using the RMR function, this critical value is clearly undercut: below one per cent.

Reduction of emission

No water bath, no compressed air – an electrical connection is all that is needed. The IvoBase system is reduced to the essentials and prevents unnecessary emissions.

Patient Satisfactory

Very comfortable to wear due to excellent fit, dimensional stability and surface finish and a low residual monomer content provides peace of mind.

The Ultimate Zirconium Oxide

Innovative and versatile zirconium oxide for cases in which high mechanical stability, thin restoration walls and natural-looking aesthetics are of the essence. For product codes and full details, visit henryschein.co.uk

Ivotion

Ivotion Denture System

Combination of both tooth and denture base material in one disc, offering an efficient monolithic solution for the digital production of patient-specific, complete, removable dentures.

ZirCAD Prime Esthetic Redefining Aesthetics

High-strength, pre-shaded zirconium oxide discs with a gradual shade and translucency gradient.

Your All-In-One Multi-Functional Zirconia Solution

Zirlux Complete allows for a full accompaniment of indications ranging from single unit restorations to multiple units for rehabilitation cases.

A consistent blend of shading elements combined with a cold isostatic pressing manufacturing process creates a highly aesthetic ceramic.

• 1000MPa.

• High strength for most indications.

• Wider range of applications in a single source zirconia.

• High strength with low opacity.

• Multilayered disc <47% translucency.

• Smooth transitional blend of shading characteristics.

• Highly aesthetic.

• Compatible with most open 98.5 CAD/CAM milling machines.

Starting at £56.09

All 16 VITA® Shades Now Available!*

Transitional Layered Zirconia for All Indications

Zirlux Esthetic TR has the unique characteristic of total gradation.

As the restoration moves from the cervical to the incisal, translucency becomes the more desired characteristic. This gives the material a much better aesthetic quality and contributes to the natural look.

• 727MPa incisal blended to 1000MPa cervical.

• Approved for most indications.

• Higher strength along the cervical area.

• Higher translucency along the incisal edge.

• Multilayered disc <48% translucency.

• Mirroring effect to match adjacent dentition.

• Easy handling.

• Highly aesthetic.

• Compatible with most open 98.5 CAD/CAM millingmachines. Chameleon effect to adapt to the neighbouring teeth.

Starting at £79.47

As seen in Dental Technician, read Paul Hayfield’s take on Zirlux Complete and Esthetic TR

CEREC Tessera

CAD/CAM blocks that provide outstanding aesthetics for a truly tooth-like restoration.

• High biaxial strength for restoration longevity.

• Faster total processing time for greater patient satisfaction and a more profitable procedure.

• Exceptional three-way performance through an innovative chemistry that incorporates 2 complementary crystal structures within a glassy zirconia matrix.

• Starter Kit includes Blocks x 12 (MT A1, MT A2, MT A3, MT A3.5, HT A2, HT A3, HT A3.5), Honeycomb Tray, Firing Pads, Investment Pins, Overglaze and Glaze Liquid, Satin/Glaze Brushes, Moldable Silicone, and Diamond-Coated Tweezers.

NOW, THERE’S ONE CHOICE FOR BEAUTY, STRENGTH, AND SPEED WITHOUT UNWANTED TRADE-OFFS.

BLOCS

VITABLOCS restorations show exceptional survival rates. Success rates of over 90% correspond to what is considered the gold standard.

In tests, VITABLOCS ceramics demonstrate abrasion comparable to that of natural enamel.

VITABLOC® Mark II/Vita System 3D Master

Fine particle feldspar ceramic blocks for CEREC® and inLab systems.

VITABLOCS® For CEREC

Designed for CAD/CAM CEREC® 3 milling. Three levels of translucency and saturation in one block. Good integration into natural dentition.

VITA ENAMIC® IS Blocs

VITA Implant Solutions (IS) are blanks for CEREC®/inLab 3D-MASTER.

Ideal for CAD/CAM fabrication of implant-supported restorations. Integrated interface to an adhesive/ titanium base (TiBase).

For product codes and full details, visit henryschein.co.uk

VITABLOCS® TriLuxe

Designed for CAD/CAM CEREC® 3 milling. Three levels of translucency and saturation in one block.

VITA ENAMIC® multiColor

CAD/CAM block with a similar composition to ENAMIC® but with a 6-layer integrated natural gradient, from cervical to incisal area.

• Perfectly suited for making highly aesthetic single tooth restorations in the front and molar areas.

IQ

ONE SQIN

NATURAL BEAUTY RESTORED

Lithium Disilicate Redefined

High-strength, lithium disilicate pressable ceramic for all types of dental restoration. Each ingot is made using High Density Micronization (HDM) technology, producing excellent physical properties while retaining exceptional aesthetics.

Lithium disilicate microcrystals are equally dispersed to fill the entire glass matrix compared to traditional larger crystals, allowing Initial LiSi Press to remain stable after multiple firings without distortion or drop in value.

Medium translucency (Press & Stain) ingots provide VITA® shade line-up with warm colours from the GC Initial family of ceramic materials.

For product codes and full details, visit henryschein.co.uk

A Initial IQ SQIN System Set

For the aesthetic realisation of monolithic or minimal buccally reduced dental frameworks made of zirconium dioxide or lithium disilicate.

• Quickly and easiliy achieves highly aesthetic results, both in the posterior and anterior region.

Initial IQ One Body LP NF, Gum Shades Set

Universal, 3-dimensional ceramic stains used to create lifelike transition from the crown margin to the gingiva by painting the gum. No complex layering or extra firing cycles required.

Lustre

GC Initial® LiSi Block

SQIN

Fully crystallised lithium disilicate block that delivers optimal physical properties without firing.

• Offers reduced processing time: simply mill, polish, and place.

High-strength, lithium disilicate pressable ceramic for all types of dental restoration.

CAD/CAM Consumables

OPTIGLAZE Color Set

Light-cured characterisation coating for indirect composite and acrylic restorations.

• Wide variety of colours available.

• Adds natural gloss and brilliance.

• Thin, 25-50ë_m coating layer.

• Long-lasting gloss.

• High discolouration resistance.

• High wear resistance.

• Excellent bonding durability.

• Complete Set Stains 15 x 2.6ml (A Plus, B Plus, C Plus, White, Ivory White, Yellow, Orange, PinkOrange, Red-Brown, Olive, Grey, Blue, Lavender, Pink, Red); Stains 2 x 5ml (Clear, Clear HV); Mixing Container; Flat Brush; Round Brush

1137264

Plastics

Polybags

PACKAGING WORLD

Sealable polythene bags.

Acrylic Burs

Rubynit Trimmer

Ruby-coated cutting tool for acrylics.

• Precise trimming of acrylic dentures without heat generation.

• Ideally suited for correction on soft acylics and relines. Cone

1094708 8.5mm

Only £10.50

LC Materials Prosthetics

Only £415

FREEPRINT® temp UV

Light-curing, biocompatible 3D resin for the generative fabrication of temporary crowns and bridges.

• For all LED/UV printers with a light spectrum of 378-388Nm.

• Exceptional breaking and flexural resistance, and high abrasion resistance.

• Natural tooth aesthetics with brilliant, translucent colours.

• Easy surface processing and polishing.

• Can be characterised individually with the smartrepair® system or composites.

• Low viscosity for low material consumption and more rapid cleaning.

• Resistant to oral conditions.

• No odour or taste irritations.

Articulating Materials Paper

Detex Articulating Paper

• 40 microns.

• Stitched cellophane.

• Does not distort.

• Wax coat will not stain model.

211536 12 Books Blue x 12 Sheets

Only £14.87

Temporary Materials (C&B)

GC Temp PRINT

Biocompatible Class IIa light-curing material for temporary crowns and bridges, free of methyl methacrylate (MMA).

• Ideal for printing temporary crowns, bridges, inlays, onlays and veneers, and can easily be glazed and/or characterised with OPTIGLAZE Color.

• The homogeneous dispersion of surface-coated silica fillers contribute to a superior wear resistance.

SLX LC Trayplates Premium Pink 50pcs

Light-curing plates for the production of individual impression trays.

• Radiolucent.

958314 £45.15

Impression Tray Resin LC

Light-cure tray material for the production of custom impression trays.

• Exhibits excellent characteristics such as handling, curing and quality consistency.

• Easily cured.

• Radiolucent (X-ray invisible).

Only £219.29

Model Plaster & Stone

Plaster Type 3

Type III hard plaster for dentures, master, situation and counter bite models.

Gibraltar-Superdie

Type IV thixotropic superhard stone.

• Exhibits excellent scratch resistance.

• Water:powder ratio - 22ml:100g.

• Working time: 6 mins.

• Setting time: 13 mins.

• Setting expansion after 2h: 0.09%.

• Compression strength after 1h (MPa): 55.

• Compression strength dry (MPa): 80.

Gibraltar-Ortho Stone

Synthetic

Type III synthetic stone for orthodontic study models.

• Super white.

• Setting time 12mins.

• Expansion 0.20%

• Wet compressive strength (MPa) 20.

Gibraltar Die Stone Plus

Type IV synthetic die-stone with thixotropic consistency.

• High stability with scratch-resistant smooth surfaces.

• Working time 5-6 mins.

• Setting time 12 mins.

Lab Putty

Addition

Lab-Putty

Easily mixed lab putty.

Blasting Material

Alublast

High-grade corundum for devesting activities.

• Ideal for removing investment and casting oxidations on steel and chrome-cobalt.

• Achieves a satin-finish on all metals.

• It features hardness, sharp effect, renewing cutting edge and high resistance to wear.

Duplicating Material

Adhesive

•

Crown & Bridge

Ceramist Synthetic Brushes

PK Thomas Carver

Waxing

General Instruments

HS Foil Scissors

Used

C Silicone

A Silicone

gingifast ELASTIC

For recreating gingival tissue and providing the emergence profile.

elite® transparent

For composite restorations.

• Medium viscosity.

• Rigid final set.

• 100% light penetration.

• Gun delivery.

1069206 Cartridge 50ml

Only £26

• Ideally complimented with zetalabor lab putty.

gingifast RIGID

Gingival reproduction for implant prosthetic models.

• Indicated for direct technique.

• Easy to trim: permits accurate margin definition.

• Precision and dimensional stability.

Bite Registration Material

EXACLEAR

An innovative, versatile clear silicone material made to fulfil the demand for high aesthetics while faciliating the way to great results.

• Indications include injection moulding technique, temporary crown and bridge work, layering of composite, bite registration, transfer of brackets from the model to the mouth, and transfer of fibres from the model to the mouth.

• Amazing transparency makes it particularly effective in complex clinical situations like wear cases, complex morphologies and challenging aesthetic cases.

• Transparency also allows the user to check every little detail and prevents the formation of an oxygen inhibition layer, thus facilitating the final polishing.

• When used together with an injectable composite, EXACLEAR enables clinicians to create restorations as aesthetic as indirect veneers, but is quicker, more affordable and uses less invasive preparations.

• Thanks to its transparency, ease of handling and rigidity after setting, EXACLEAR makes complex procedures much easier and provides a smoother workflow.

1192269 Cartridge 51g x 2

Only £53.99

Composites

GC GRADIA™ PLUS

High-strength, nano-hybrid, light curing composite offering brightness, translucency, chroma and a natural opalescence that is similar to porcelain.

• Wide range of clinical applications: from metal free inlays, veneers and jacket crowns to frame-supported crowns & bridges and implant superstructures.

• High-density and homogeneously dispersed ultra-fine fillers offering high mechanical properties achieved by light-curing only.

• High wear-resistance, compacted surface and surface smoothness, which delivers durability and high gloss retention.

• Lustre Paint colours providing a simple way to add long-lasting colour and surface gloss as well as a high wear resistance and protection.

Heavy Body Dentin Shades

Light Body Dentin and Enamel

Stain & Glaze

IPS Ivocolor®

Universal range of stains and glaze materials for characterising and glazing both high and low fusing ceramic materials that fall within a CTE range of 9.5 and 16.6 x 10-6/K.

• Individual freedom in customising restorations due to select colour compositions.

• Streamlined handling with an innovative paste formulation.

• High gloss obtainable at firing temperatures as low as 710°C.

• Taintless gloss results – no grey or white discolouration.

• Varying levels of fluorescence according to shade.

Starter Kit

1171858 Shade Paste Dentin 3g x 3 (SD1, SD2, SD3), Shade Paste Incisal 3g x 2 (SI1, SI2), Essence Powder 1.8g x 5 (E01 White, E02 Creme, E10 Mahogany, E17 Anthracite, E21 Red), Glaze Powder 1.8g, Glaze Paste 3g, Mixing Liquid allround 15ml, Essence Fluid 15ml and Shade Guides x 2 (Shade and Essence)

3D Printing Resins

Die & Model 2

Dental modelling material with improved flexural modulus and strength.

• Prints up to 8 full arch models in just 15 minutes.

• Fantastic colour and finish that mimics dental stone.

Study Model 2

Innovative material formulation that provides outstanding colour, clarity and production speed, making it ideal for patient presentation.

• Same-visit mock-ups and wax-ups.

• Prints full-arch models in just 18 minutes.

• Pure white colour, even after post-curing.

1203410 Grey 1L

1203411 Tan 1L

Temporary Crown & Teeth

Resin for the generative production of long-term temporary dental restorations based on image projection systems.

Splint Flex

Resin used for the production of orthodontic and dental objects such as mouthguards, nightguards, snoring appliances and splints.

Surgical Guide

1203412 White 1L

Denture Base

Highly accurate resin specifically formulated for the creation of custom denture bases of all types.

1205880 Orange Pink 1kg

1205879 Light Pink 1kg

1205878 Deep Pink 1kg

Biocompatible photopolymer resin for the printing of accurate surgical guides for dental implants.

• High strength and excellent dimensional accuracy.

IDB

Biocompatible indirect bonding material for the production of tear-resistant, flexible trays with outstanding accuracy.

• Significantly reduces bracket placement time.

1205889 Light Blue Transparent 1kg

1209916 Clear 1kg

1205888 Clear Transparent 1kg

KeyModel Ultra™

For next-gen dental and orthodontic models.

• Ultra-fast printing and flawless detail.

• Thermoforming quick-release agent.

• Carvable without chipping.

• Pairs perfectly with KeyMask™.

DentaMODEL

Dental resin for the production of accurate dental models and dental models with removable dies.

• Printer compatibility: 385nm and 405nm.

• Almond colour.

Only £123.24

1201984 Ivory 1kg

1201985 Light Grey 1kg

Modelling Wax

Pumice

100% natural pumice.

30%

Only £36.12

Toughened, pale pink sheet wax.

• Flexible, easy working and non-brittle.

Modelling Wax

Standard modelling wax is medium hardness.

• Special modelling wax is medium hardness (slightly softer than standard).

• Very malleable.

Only £30

Used by the technician to create the preliminary denture base for the dentist to try in the patient’s mouth.

• Low emissions,environmentally friendly.

1.25mm 500g

051552 2.5kg

1128217 2.5kg

Anutex® Eco Modelling Wax

Anutex® Modelling Wax

1195711 DentaMODEL 1kg