MICERIUM 72

CODE: 1161051

The ENA Heater is ideal to improve handling properties of viscous composite material.

It warms up the composite at the temperature of approx. 39°C, making the material more flowable and reducing the stress in the extrusion from the syringe and stratification phases. In this way, this reduces the risk of separation between the matrix and filler, it improves the biomechanical characteristics of the composite and it avoids bubbles.

With 6 spaces for syringes and 4 spaces for tips.

ENA SOFT DENTINE

ENAMEL PLUS HRI FLOW INTRO KIT

CODE: 1159872 - 1x 5g Syringe

Ena Soft is an elastic material for temporary restorations. It has advantages of easy removal in one piece without damage to preparation. It is also suitable for long term temporaries because it perfectly maintains the shape of tooth. This material is excellent for accessing implant sites.

UNIQUE BENEFITS:

Simple to apply; not sticky Suitable for inlay & onlay Easy to remove from implant screws Easy to remove in one piece Strong and long-lasting fillings

CODE: 1159909

REFILLS AVAILABLE

CONTENTS 7x 2g Syringes (UD1, UD2, UD3, UD3.5, UD4, UD5, UD6) 25x Black tips 1x Syringe holder

Enamel plus HRi Flow is used when a flowable composite is required for use as a cavity liner in posteriors for direct and indirect restorations, in anteriors for Class V build-ups and veneer cementation. This composite is 78% filled and has excellent polishability.

CODE: 1026931

Dento-Prep Microblaster is a state-of-the-art aluminium oxide air abrasive instrument manufactured from high grade steel, featuring a feather trigger, which is activated by an air valve.

The micro-fine blasting can be used to roughen the surfaces of metal, ceramic and plastic materials for effective reinforcement of adhesion with bonding agents.

The instrument is ideal for both intraoral and extraoral applications.

Nozzle rotates 360 degrees Perfectly balanced Feather touch finger-controlled Easy to install either directly to compressed air supply or to turbine coupling

DENTO-PREP CONNECTORS

CODES: VARIOUS

Dento-Prep connectors to fit to the following high speed couplings: Connector S for Siemens / Connector W for W&H / Connector K for Kavo Multifelx Connector B for Bien-Air / Connector N for NSK / Connector M for Midwest

ASPIJECT

CODE: 1160093

The Aspiject Syringe 1.8ml is a self-aspirating syringe for use with a 1.8ml anaesthetic cartridge. Manufactured in stainless steel to the highest engineering standards, its unique styling and design offers the ultimate in balance, feel and tactile control of your injection.

Self-aspirating without pull-back minimises the risk of needle tip movement Automatic (passive) aspiration occurs when a slight pressure on the plunger or the thumb disc is eased Made from high-grade acid-resistant stainless steel and heat resistant engineering polymer Can be sterilised by any method (max. 200oC / 390oF) For standard and dental cartridges and needles 5-year guarantee

CERAMIC TISSUE TRIMMER

CODE: 1160091

Ceramic Tissue Trimmer is a rotating instrument that can often replace both electro-surgery and surgical blades as well as the use of retraction cord.

Secures a nice and gentle cut while the heat development creates a good haemostasis, minimal bleeding and the risk of necrosis is virtually eliminated. The kinetic energy causes a heat-coagulating effect without ‘burning’ the tissue and can be used without any water/spray/cooling.

Gingival modelling Freeing deep cavities Laceration of interradicular granulation tissue Papillectomy/removal of hyperplastic gingiva Exposure of intraosseous implant sections and retinated teeth Can be sterilised by any method (max 135°C/275°F)