Apextool3 by Herramientas Mecanicas

S C I S S O R S

A N D

S N I P S

Industrial Trimming, Grape Thinning & Orchid Snips

■■ Hot drop-forged solid steel ■■ Straight, polished blades with adjustable nut ■■ Heavy pattern ■■ Coil spring handle opens blades after each cut ■■ Black baked enamel handle with closing latch Cat. No.

UPC No.

C4ASN

037103223487

Packaging

Tool Length

Blade Length

Cutting Capacity

Product Weight

Shelf Pack Qty.

Boxed

8 in

2-1/4 in

N/A

0.44 lb

Light Metal-Cutting Snips

■■ Used in electronic and appliance light metal cutting ■■ Comes with polished straight blades

Cat. No.

UPC No.

J7SN

037103223494

Packaging

Tool Length

Blade Length

Cutting Capacity

Product Weight

Shelf Pack Qty.

Boxed

7 in

1 in

N/A

0.25 lb

Electronics and Filament Scissors

■■ Hot drop-forged solid steel ■■ Coil spring handle opens blades after each cut ■■ Straight blades ■■ Polished blades with black handle

Cat. No.

UPC No.

605N

037103223470

Packaging

Tool Length

Blade Length

Product Weight

Shelf Pack Qty.

Boxed

5 in

3/4 in

0.22 lb

Electrician's Scissors

Cat. No.

UPC No.

C U T T I N G

■■ Double stripping notch for 19 gauge (0.035) and 23 gauge (0.022) wire ■■ Hot drop-forged solid steel ■■ Is serrated along entire bottom blade ■■ Scraper and file on back edge of blade ■■ Standard full drop run ■■ Fully nickel-plated ■■ Packaged in vinyl pouch Packaging

Tool Length

Blade Length

Product Weight

Shelf Pack Qty.

175E

037103580801

Boxed

5-1/4 in

1-3/4 in

0.20 lb

175E5

037103580825

0.20 lb

175E5V

037103582188

Carded

5-1/4 in

1-3/4 in

0.20 lb

949

C U T T I N G

Cutting Tips 1. When heavy cutting is involved, place one handle of the tool on the ground using foot pressure. This allows more power to be transferred to the cutting edges, and permits the cutting force to be applied to the upper handle. 2. Use the correct cutting tool for the type, size, and hardness of the metal to be cut. Failure to do so can result in product damage or injury. 3. Keep cutter jaws at right angles to piece being cut. Cutting diagonally may twist jaws and damage head. 4. Do not twist or pry with tool while cutting. 5. Do not exceed the full cut on a material whose hardness is unknown. Test hardness with slow pressure to see if material surface is being cut. The size of the metal you are cutting is not as important as material hardness. 6. Do not exceed the cutter capacity that is marked on the jaw of the tool or its rating capacity in this catalog. 7. Keep jaw bolts tight and joints oiled at all times. Inspect tool frequently for damage and replace worn parts. 8. Maintain the original jaw bevel angles when sharpening out of line or chip cutting edges.

Safety Do's and Don'ts Wear your gloves and safety glasses at all times! Do wear safety shoes. Do remove oil or grease from your hands, from tools and from the floor and area where you will be working. Do remember that metal can fly when cut. The harder the metal, the farther it will fly, and possibly cause injury. Do warn those in the area when you intend to use a cutter and protect others. Do use all tools as recommended. Don’t attempt to use a cutting, hand or power tool, until you fully understand its use.

Don’t forget that metal fragments may fly and cause injury. Don’t use cutters for any application except those listed in this catalog. Don’t use H.K. Porter cutters on energized circuits, wire, or cable. Don’t use cutters that are damaged or need parts replaced due to wear. Don’t use cutter products on energized circuits, wire or cables.

Safety Precautions C U T T I N G

Hard metals may snap off or fly through the air when cut. Always wear safety glasses and warn workers nearby to prevent injury from flying metal. Take precautions such as wrapping a cloth or rag around the cutting jaws to contain fragments during cutting.

950

READ AND UNDERSTAND ALL DIRECTIONS BEFORE OPERATING ANY H.K. PORTER® MANUAL, HYDRAULIC OR PNEUMATIC TOOL

C U T T I N G

How to Determine What Type of Cutter to Use 1. What is the material to be cut? 2. What size is the material to be cut? Capacities of all hand-operated cutters are shown opposite each catalog listing. Power tool capacities are shown in the Power Tool Selector chart. Do not exceed listed capacities. 3. How hard is the material to be cut? Many of the materials illustrated in the chart below are made in varying degrees of hardness. The maxmum hard ness ratings that each hand and power tool is designed to cut are shown under each tool in this catalog. Extra Hard Metals: Up to Brinell 455/Rockwell C48 Hard Metals: Up to Brinell 400/Rockwell C42 Medium Hard Metals: Up to Brinell 300/Rockwell C31 Soft Metals: Up to Brinell 200/Rockwell C15 4. Will numerous or few cuts be made in a day? The frequency of cuts to be made should be taken into consideration when choosing a cutter. HKP manufactures inexpensive hand cutters for light-duty work, heavy-duty cutters for tougher jobs, and hydraulic and pneumatic cutters for extremely hard materials and production cutting.

5. Is speed a factor in the cutting? Choose the proper cutter to fit the job requirements, whether an occasional cut is called for or fast, continuous, industrial production cutting. Still not sure? Send material samples to: Apex Tool Group - Sumter Plant Industrial Park Sumter, SC 29154 Attn: HKP Test Material Note: Provide answers to as many of the questions as possible.

WARNING • Always wear safety glasses/goggles when cutting. • Cut in a safe area. Consider the safety of others. • The harder the material being cut, the greater it is to become airborn during cutting. • Use tools correctly! (Refer to “Engineering Information” section of this catalog) • Use the correct tool for the work being performed. • Maintain tools, power supplies, and hoses in safe working condition.

Jaw Designs There are four basic jaw designs. They are engineered to give long, trouble-free life and the most efficient cutting of the materials which they are designed to cut.

ANGULAR JAWS

ALL-PURPOSE JAWS

SHORT-NOSED JAWS

HEAVY-DUTY STRAP JAWS

30° offset jaws have clipper-cut blades, designed for cutting close or flush to a surface. Cuts soft or medium-hard material.

Can have center-or clipper-cut blades used for broad cutting applications.

Center-cut, carbide-tipped blades for cutting hard- and nonalloy chains and padlock hasps.

Straps keep the cutting edges aligned under the most demanding applications.

C U T T I N G

Cutting Blades Four different cutting blade styles are available for specific types or broad ranges of cutting applications.

CENTER-CUT BLADES

CLIPPER-CUT BLADES

SHEAR-CUT BLADES

END-CUT BLADES

Slightly rounded cutting edges, beveled on both sides, broaden cutting applications.

Blades are beveled on only one side for smooth flush cuts that are close to workpiece.

Designed to cut coarse- or finestrand cable with minimal strand distortion.

Blades are at right angles to handles for easier handling and “head-on” close cutting of materials.

951

C U T T I N G

How to Sharpen Cutter Jaws • • • • • • • •

Remove nicks in jaws by filing straight across cutting edges On jaws with equal bevels, file equally from each bevel, keep file flat against bevel On jaws with one large bevel, file on that bevel. Small bevel must also be restored Jaws should not be razor sharp Approximately 1/64” (0.4mm) should remain flat to form strong, durable edge To sharpen shear-cut blades (blades that pass each other like scissors) remove nicks by filing straight across cutting edges Finish by running a flat file over inner jaw surface to remove burrs Adjust tool according to the instructions below

Shaded area shows part of cutting edge which may be filed

How to Adjust Cutter Jaws

• • • • • •

An adjustment screw is located on the cutter handle above the toggle joints If jaw edges are too far apart with handles closed, tighten adjusting screw, this brings cutting edges together Cutting edges should be 1/64” (0.4mm) apart for longest jaw life Oil all joints and keep free of debris If jaw edges are too close together with the handles apart, loosen adjusting screw until it disappears from the narrow slot in the handle Make a cut with the tool in this position (cut will force the slot inward)

• • • • •

Try to close the handles. If they do not close completely and jaw edges are 1/64” (0.4mm) apart, tighten adjusting screw to meet the handle on far side of slot Oil all joints and keep free of debris If jaws are too far apart with handles closed after making cut with adjusting screw backed off, tighten adjusting screw as explained above To sharpen shear-cut blades (blades that operate, like scissors), remove nicks by filing straight across the cutting edges Finish by running a flat file over inner blade surface to remove burrs.

C U T T I N G

Nicholson® File Recommendations

952

For Jaw Type

Use File Type

Straight

6", 8", or 10" Mill Bastard

Curved

8", 10", or 12" Half Round Bastard

Straight with Notch

8" or 10" Mill Bastard with One Round Edge

Notched

8" or 10" Round Bastard

• Choose file size according to size of jaw and/or radius of curve • Half round files are the most versatile

H A N D

O P E R A T E D

C U T T E R S

Industrial Grade, Center Cut Cutters ■■ General plant maintenance tool ■■ Drop-forged precision ground alloy tool steel jaws with centercut blades ■■ Cuts soft, medium, or hard materials ■■ Maximum hardness of material to be cut: Brinell 455/ Rockwell C48 ■■ Lockplate keeps jaws from loosening ■■ Toggle joints turn 50 lbs hand pressure to 4000 lbs cutting pressure ■■ Screw-type adjustment realigns edges ■■ Steel handles with rubber grips ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable! Cat. No.

UPC No.

1490MC

037103913777

Packaging

Length

Soft and Medium Hard Materials (Up to Brinell 300, Rockwell C31)

Hard Materials (Up to Brinell 455, Rockwell C48)

Replacement Cutterhead/ Jaws Cat. No.

Product Weight

Boxed

14 in

5/16 in, 8 mm

3/16 in, 5 mm

1413C

3.20 lb

0090MC

037103905529

Boxed

18 in

3/8 in, 10 mm

1/4 in, 6 mm

0013C

3.70 lb

0190MC

037103907134

Boxed

24 in

7/16 in, 11 mm

5/16 in, 8 mm

0113C

6.45 lb

0290MC

037103908094

Boxed

30 in

1/2 in, 13 mm

3/8 in, 10 mm

0213C

10.15 lb

0390MC

037103909336

Boxed

36 in

9/16 in, 14 mm

7/16 in, 11 mm

0313C

16.05 lb

0590MC

037103910790

Boxed

42 in

11/16 in, 18 mm

1/2 in, 13 mm

0513C

8.26 lb

General Purpose Center Cut Bolt Cutters

UPC No.

1490AC

037103040978

Packaging

Length

Soft and Medium Hard Materials (Up to Brinell 200, Rockwell C15)

Hard Materials (Up to Brinell 300, Rockwell C31)

Replacement Cutterhead/ Jaws Cat. No.

Product Weight

Boxed

14 in

5/16 in, 8 mm

1/4 in, 6 mm

1413AC

2.60 lb

0090AC

037103040985

Boxed

18 in

3/8 in, 10 mm

5/16 in, 8 mm

0013AC

3.55 lb

0190AC

037103040992

Boxed

24 in

7/16 in, 11 mm

3/8 in, 10 mm

0113AC

5.35 lb

C U T T I N G

Cat. No.

■■ Series 2000 Bolt Cutter ■■ Drop-forged jaws with center-cut blades ■■ Heat treated for wear resistance and long cutting life ■■ Cuts soft, and medium/hard materials ■■ Maximum hardness of material to be cut: Brinell 300/ Rockwell C31 ■■ Toggle joints turn 50 lbs hand pressure to 4000 lbs cutting pressure ■■ Precision cast, 1-piece, aluminum alloy handles with rubber grips ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable!

953

H A N D

O P E R A T E D

C U T T E R S

Industrial Grade, Clipper Cut Cutters ■■ All-purpose jaws with clipper-cut blades for close or flush cutting ■■ Not for cutting hard materials ■■ Maximum hardness of material to be cut: Brinell 300/ Rockwell C31 ■■ Lockplate keeps jaws from loosening ■■ Toggle joints turn 50 lbs hand pressure to 4000 lbs cutting pressure ■■ Screw-type adjustment realigns edges ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable! Packaging

Length

Soft and Medium Hard Materials (Up to Brinell 200, Rockwell C15)

Hard Materials (Up to Brinell 300, Rockwell C31)

Replacement Cutterhead/ Jaws Cat. No.

Product Weight

037103913784

Boxed

14 in

5/16 in, 8 mm

1/4 in, 6 mm

1413NE

3.10 lb

0090MNE

037103905574

Boxed

18 in

3/8 in, 10 mm

5/16 in, 8 mm

0013NE

3.75 lb

0190MNE

037103907196

Boxed

24 in

7/16 in, 11 mm

3/8 in, 10 mm

0113NE

5.25 lb

Cat. No.

UPC No.

1490MNE

0290MNE

037103908124

Boxed

30 in

1/2 in, 13 mm

7/16 in, 11 mm

0213NE

8.50 lb

0390MNE

037103909411

Boxed

36 in

9/16 in, 14 mm

1/2 in, 13 mm

0313NE

15.50 lb

General Purpose, Center Cut Cutters ■■ All-purpose jaws with center-cut blades ■■ Cuts soft, medium, and hard metals ■■ Maximum hardness of material to be cut: Brinell 455/ Rockwell C48 ■■ Lockplate keeps jaws from loosening ■■ Toggle joints turn 50 lbs hand pressure to 4000 lbs cutting pressure ■■ Screw-type adjustment realigns edges ■■ Strong, lightweight fiberglass handles ■■ Very popular cutter ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable!

C U T T I N G

Cat. No.

954

UPC No.

Packaging

Length

Soft and Medium Hard Materials (Up to Brinell 300, Rockwell C31)

Hard Materials (Up to Brinell 455, Rockwell C48)

Replacement Cutterhead/ Jaws Cat. No.

Product Weight

0090FC

037103905451

Boxed

18-1/4 in

3/8 in, 10 mm

1/4 in, 6 mm

0013C

3.60 lb

0190FC

037103907073

Boxed

24-1/2 in

7/16 in, 11 mm

5/16 in, 8 mm

0113C

5.70 lb

0290FC

037103908032

Boxed

30-1/2 in

1/2 in, 13 mm

3/8 in, 10 mm

0213C

7.50 lb

0390FC

037103909299

Boxed

36-1/2 in

9/16 in, 14 mm

7/16 in, 11 mm

0313C

13.40 lb

H A N D

O P E R A T E D

C U T T E R S

Angular Style Cutters ■■ Angular-style jaws with clipper-cut blades ■■ 30° offset to keep work in view ■■ Keeps hands clear of work surface while cutting ■■ Cuts soft and medium materials ■■ Maximum hardness of material to be cut: Brinell 300/ Rockwell C31 ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable! Packaging

Length

Soft and Medium Hard Materials (Up to Brinell 200, Rockwell C15)

Hard Materials (Up to Brinell 300, Rockwell C31)

Replacement Cutterhead/ Jaws Cat. No.

Product Weight

037103913760

Boxed

14 in

5/16 in, 8 mm

1/4 in, 6 mm

1413AF

3.15 lb

0190MA

037103907127

Boxed

24 in

7/16 in, 11 mm

3/8 in, 10 mm

0113A

5.50 lb

0390MA

037103909329

Boxed

36 in

9/16 in, 14 mm

1/2 in, 13 mm

0313A

13.13 lb

Cat. No.

UPC No.

1490MAF

Heavy Duty Cutters - Steel Handles ■■ Recommended for the most demanding hand cutting applications ■■ Heavy-duty straps support the jaws ■■ Maximum hardness of material to be cut: Brinell 455/ Rockwell C48 ■■ Lockplate keeps jaws from loosening ■■ Toggle joints turn 50 lbs hand pressure to 4000 lbs cutting pressure ■■ Screw-type adjustment realigns edges ■■ Tubular steel handles ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable! UPC No.

0190MCX

037103907165

Packaging

Length

Hard Metal and Wire Mesh

Reinforcing Rod and Bar

Replacement Cutterhead/Jaws Cat. No.

Product Weight

Boxed

24 in

5/16 in, 8 mm

0113CX

6.40 lb

0290MCX

037103908100

Boxed

30 in

3/8 in, 10 mm

#3 Bar, 3/8 in, 10 mm

0213CX

9.25 lb

0390MCX

037103909350

Boxed

36 in

7/16 in, 11 mm

0313CX

17.50 lb

0590MCX

037103910813

Boxed

42 in

1/2 in, 13 mm

#4 Bar, 1/2 in, 13 mm

0513CX

21.80 lb

Cat. No.

Heavy Duty Cutters - Fiberglass Handles C U T T I N G

■■ Recommended for the most demanding hand cutting applications ■■ Heavy-duty straps support the jaws ■■ Maximum hardness of material to be cut: Brinell 455/ Rockwell C48 ■■ Lockplate keeps jaws from loosening ■■ Toggle joints turn 50 lbs hand pressure to 4000 lbs cutting pressure ■■ Screw-type adjustment realigns edges ■■ Lightweight, fiberglass handles ■■ Popular cutter ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable! Cat. No.

UPC No.

Packaging

Length

Hard Metal and Wire Mesh

Reinforcing Rod and Bar

Replacement Cutterhead/Jaws Cat. No.

Product Weight

0190FCX

037103907080

Boxed

24 in

5/16 in, 8 mm

0113CX

5.70 lb

0290FCX

037103008060

Boxed

30 in

3/8 in, 10 mm

#3 Bar, 3/8 in, 10 mm

0213CX

9.50 lb

0390FCX

037103909312

Boxed

36 in

7/16 in, 11 mm

0313CX

11.50 lb

955

H A N D

O P E R A T E D

C U T T E R S

Heavy Duty Cutters with Keeper ■■ Center cut jaws ■■ Heavy-duty straps support the jaws ■■ Cuts hard metals and bolts, rods, bars, ACSR, and ACAR ■■ Lockplate keeps jaws from loosening ■■ Toggle joints turn 50 lbs hand pressure to 4000 lbs cutting pressure ■■ Screw-type adjustment realigns edges ■■ Swing-away keeper holds EHS guy wire and pre-stressed cable in position ■■ Prevents cable spreading or deforming, gives complete cut of all strands ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable! Cat. No.

UPC No.

Packaging

Length

Prestressed EHS Guy Strand, ACSR and ACAR Cable

Replacement Cutterhead/Jaws Cat. No.

Product Weight

0190MCK

037103907141

Boxed

24 in

5/16 in, 8 mm

0113MCK

6.50 lb

0390MCK

037103909343

Boxed

36 in

7/16 in, 11 mm

0313MCK

14.91 lb

C U T T I N G

End Cut Nipper

956

■■ End-cut blades are at right angles to handles ■■ Easier handling and head-on, close cutting in confined spaces ■■ Cuts soft materials ■■ Maximum hardness of material to be cut: Brinell 200/ Rockwell C15 ■■ Lockplate keeps jaws from loosening ■■ Toggle joints turn 50 lbs hand pressure to 4000 lbs cutting pressure ■■ Screw-type adjustment realigns edges ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable! Cat. No.

UPC No.

0190ME

037103907172

Packaging

Length

Soft Steel, Non-Ferrous Material

Wrought Iron

Soft Bolts, Rivets, Screws, Wire

Product Weight

Boxed

24 in

5/16 in, 8 mm

5.38 lb

Bolt Cutter/Cable Cutter ■■ Cuts soft, medium hard, and hard materials ■■ Cuts metal rod to 7/16" diameter ■■ Strap cuts wire rope to 1/4" diameter ■■ Maximum hardness of material to be cut: Brinell 455/ Rockwell C48 ■■ Lockplate keeps jaws from loosening ■■ Toggle joints turn 50 lbs hand pressure to 4000 lbs cutting pressure ■■ Screw-type adjustment realigns edges ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable! Cat. No.

UPC No.

0190MCS

037103907158

Packaging

Length

Soft and Medium Hard Materials (Up to Brinell 300, Rockwell C31)

Hard Materials (Up to Brinell 455, Rockwell C48)

Replacement Cutterhead/ Jaws Cat. No.

Product Weight

Boxed

24 in

7/16 in, 11 mm

5/16 in, 8 mm

0113MCS

6.40 lb

H A N D

O P E R A T E D

C U T T E R S

Heavy Duty Cutters ■■ Extremely strong, durable tool ■■ Short-nosed jaws with high-tempered, center-cut blades ■■ Cuts hard, non-alloy chain ■■ Maximum hardness of material to be cut: Brinell 455/ Rockwell C48 ■■ Lockplate keeps jaws from loosening ■■ Toggle joints turn 50 lbs hand pressure to 4000 lbs cutting pressure ■■ Screw-type adjustment realigns edges ■■ Heavy duty straps ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable! Packaging

Length

Hard and Non-Alloy Chain (Up to Brinell 455 Rockwell C48)

Padlocks Non-Alloy

Replacement Cutterhead/ Jaws Cat. No.

037103907189

Boxed

24 in

5/16 in, 8 mm

0113HC

6.30 lb

0390MHX

037103909367

Boxed

36 in

7/16 in, 11 mm

0313HCX

16.90 lb

0590MHX

037103910820

Boxed

42 in

1/2 in, 13 mm

0513HCX

18.15 lb

Cat. No.

UPC No.

0190MHC

Product Weight

Hand-Operated, Work Station Cutters

■■ 4 blade styles: shear-cut, center-cut, clipper-cut, and hard chain ■■ Other cutterheads available on order ■■ Cuts non-ferrous materials, soft, medium, and hard steel, non-alloy chain, and wire rope ■■ Maximum hardness of materials to be cut:Brinell/Rockwell 455/ C48, and 300/C31 ■■ 21" handle ■■ Can be mounted to bench or work station ■■ Base measures 3x6" (76x152mm) ■■ Weighs 8 lbs. (4 kg) Packaging

Brinell Hardness

Rockwell Hardness

Soft Steel, NonFerrous Material

Medium Steel Dia.

Hard Steel Dia.

037103922809

Boxed

400

C48

3/8 in, 10 mm

5/16 in, 8 mm

037103922830

Boxed

400

C48

1/4 in, 6 mm

Cat. No.

UPC No.

7190C 7190HC

Non-Alloy Chain

Wire Rope

Product Weight

1/4 in, 6 mm

8.00 lb

1/4 in, 6 mm

8.50 lb

7190NE

037103922847

Boxed

300

C31

3/8 in, 10 mm

5/16 in, 8 mm

7.80 lb

7190TN

037103922908

Boxed

400

C42

3/8, 10 mm

8.50 lb C U T T I N G

Shear Type Hand Operated Cable Cutters ■■ Lightweight, rugged cutter ■■ Drop-forged, alloy tool steel jaws with shear-cut blades ■■ Cuts copper or aluminum, power and communications cable ■■ Fiberglass handles for 2-handed control ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable!

Cat. No.

UPC No.

Packaging

Length

Copper Power Cable

Aluminum Power Cable

Communication Cable

Replacement Cutterhead/ Jaws Cat. No.

Product Weight

0290FCS

037103908063

Boxed

25-1/2 in

500 MCM

750 MCM

1 3/8, 35 mm

0213CSS

4.90 lb

0390FCS

037103909305

Boxed

32 in

750 MCM

1200 MCM

1 3/4, 44 mm

0313FCS

8.00 lb

957

H A N D

O P E R A T E D

C U T T E R S

Shear Type Cable Cutters ■■ Notched, shear-cut blades hold and lock cable in cutting position ■■ Cuts steel cable, coarse- or fine-stranded cable with minimal distortion ■■ Cuts wire rope with minimal distortion ■■ Toggle joints turn 50 lbs hand pressure to 4000 lbs cutting pressure ■■ Screw-type adjustment realigns edges ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable! Cat. No.

UPC No.

Packaging

Length

Wire Rope

Aircraft Cable

Hard Stainless Steel Cable

Replacement Cutterhead/Jaws Cat. No.

Product Weight

1490MTN

037103913807

Boxed

14 in

1/4 in, 6 mm

1413TN

2.80 lb

0190MTN

037103907219

Boxed

24 in

3/8 in, 10 mm

0113TN

5.60 lb

0390MTN

037103909435

Boxed

36 in

5/8 in, 16 mm

0313TN

13.00 lb

0590MTN

037103910875

Boxed

42 in

3/4 in, 19 mm

0513TN

17.90 lb

B Strand Cutter

■■ Support cable only up to 5/16" ■■ Notched, shear-cut blades hold and lock cable in cutting position ■■ Cuts self-supporting steel cable with minimal distortion ■■ Cuts coarse or fine-stranded cable with minimal distortion ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable! Cat. No.

UPC No.

0190MTQ

037103907233

Packaging

Length

Capacity

Replacement Cutterhead/Jaws Cat. No.

Product Weight

Boxed

24 in

5/16 in

0113TQ

5.00 lb

C U T T I N G

ACSR, Wire Rope and Cable Cuttter ■■ An economical tool for general cutting ■■ Shear-cut blades ■■ Cuts soft and hard steel cable, wire rope, and small ACSR cable ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable! Cat. No.

UPC No.

0290FHJ

037103908070

Packaging

Length

Wire Rope

ACSR

Copper, Aluminum

Product Weight

Boxed

28 in

3/8 in, 10 mm

7/16 in, 11 mm

1 in, 25 mm

6.60 lb

Swaging Tool ■■ For crimping cable ferrules and stops ■■ Strap cuts wire rope to 1/4" ■■ Includes sizes 1/16" 3/32" 1/8" 5/32" and 3/16" ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable!

958

Cat. No.

UPC No.

0190NSL

037103152688

Packaging

Length

Capacity

Product Weight

Boxed

25 in

1/16 - 3/16 in

7.00 lb

H A N D

O P E R A T E D

C U T T E R S

Communications Cable Cutters ■■ Shear-cut blades give clean, sharp cut with minimal distortion ■■ Cuts lead - and rubber-covered communications cable only ■■ Do NOT cut hard cable, ACSR, self-supporting strand, or steel ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable!

Cat. No.

UPC No.

Packaging

Length

Communications Cable Only

Replacement Handle/Blade Assy Cat. No.

0190CSP

037103907066

Boxed

23-1/2 in

1 in, 25 mm

0119CSP

Product Weight

5.25 lb

0390CSP

037103909275

Boxed

37 in

2 1/4 in, 57 mm

0319CSS

12.70 lb

Rebar Cutter and Bender ■■ Rugged contractor’s tool ■■ Shear-cut blades ■■ Cuts and bends to 90° or 180° ■■ Mounts easily on most flat surfaces to enhance leverage and increase safety

UPC No.

0590RBJN

037103222916

Packaging

Length

Max. Capacity

Replacement Cutterhead/Jaws Cat. No.

Product Weight

Boxed

52 in

5/8 in

0513RBJN

44.00 lb

Cat. No.

Compact, Electric Cable Cutter

Cat. No.

UPC No.

0890CSJ

037103911919

Packaging

Length

Copper Cable

Aluminum Cable

Product Weight

Shelf Pack Qty.

Carded

9-1/2 in

2/0

4/0

0.85 lb

C U T T I N G

■■ High-leverage jaws with shear-cut blades ■■ Do NOT cut steel or ACSR ■■ Industrial, non-slip grips ■■ Compact cutter fits into most tool pouches ■■ NOT an insulated tool ■■ Blister packed for easy point-of-purchase display ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable!

959

H A N D

O P E R A T E D

C U T T E R S

Pocket Wire Rope and Cable Cutter ■■ Top-quality, pocket-size cutter ■■ Shear-cut blades ■■ Excellent cutter for 3/16" hard wire rope or cablee ■■ 1/4" soft wire rope or cable, piano wire, or aircraft cable ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable! Cat. No.

UPC No.

0690TN

037103911315

Packaging

Length

Cable Capacity

Rod Capacity

Product Weight

Shelf Pack Qty.

Carded

7-1/2 in

3/16 in, 5 mm

3/32 in, 2.4 mm

0.80 lb

Wire Cutter ■■ Center cut blades ■■ Cuts mild steel (Brinel 140) (80,000 PSI) to 5/32" diameter ■■ Cuts hard steel (HRC 44) (208,000 PSI) to 3/32" diameter ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable! Cat. No.

UPC No.

PWC9

037103925756

Packaging

Length

Medium Steel Dia.

Hard Steel Dia.

Product Weight

Shelf Pack Qty.

Boxed

8-1/2 in

5/32 in, 4 mm

3/32 in, 2.4 mm

0.72 lb

C U T T I N G

Nut Splitter

960

■■ Removes rusted or frozen nuts ■■ Center-cut blades ■■ Blades swivel 360° for ease in splitting hard to reach nuts ■■ Black-oxide, rust-resistant finish ■■ Plastisol-coated handle ■■ Place blades across nut at 90° angles ■■ Turn power screw with impact or hand wrench to split nuts ■■ Doesn't injure bolt or thread, splits both sides of nut at once ■■ Replacement adjusting screw with ball: 1338P ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable! Cat. No.

UPC No.

1390PQ

037103913166

Packaging

Length

Replacement Blade Cat No.

Capacity

Product Weight

Boxed

11-3/4 in

1317PQ (1 each)

Cuts nuts up to 3/4 in (19mm) accross flats

3.21 lb

Steel Strap Cutter, 3/4" ■■ Sheer-cut blades give clean, smooth, easy cuts ■■ Lower jaw slides under the tightest strapping or staple ■■ Workhead has black oxide, rust-resistant finish ■■ Cuts steel strap up to 3/4" wide ■■ Spring action handles open jaws automatically before and after each cut ■■ Plastisol ® grips ■■ HKP's most popular strap cutter model ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable! Cat. No.

UPC No.

0990T

037103912053

Packaging

Length

Flat Steel Strap

Round Steel Tie Wire

Product Weight

Boxed

9 in

3/4 in x 0.035 in, 19 mm x 1 mm

0.080 in, 2 mm

1.25 lb

H A N D

O P E R A T E D

C U T T E R S

Steel Strap Cutter, 1-1/4" ■■ Sheer-cut blades ■■ Workhead has black oxide, rust-resistant finish ■■ 1-handed operation gives extra leverage for continuous cuts ■■ Cuts wide steel strap, quickly and cleanly ■■ Cushion grip handles ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable! Cat. No.

UPC No.

1290G

037103912718

Packaging

Length

Flat Steel Strap

Product Weight

Boxed

12 in

1-1/4 in x 0.050 in, 32 mm x 1 mm

1.70 lb

Heavy Duty, Steel Strap Cutter, 2" ■■ Sheer-cut blades ■■ Cuts heavy steel strapping up to 2" ■■ Excellent for pallets, loading and unloading freight cars, trucks, ships ■■ Long-handled, goose neck, 2-hand operated cutter ■■ Keep hands away from cutting area ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable! Cat. No.

UPC No.

2690GP

037103916242

Packaging

Length

Flat Steel Strap

Product Weight

Boxed

24 in

2 in x 0.050 in, 51 mm x 1 mm

6.80 lb

Handklip Cutter

Cat. No.

UPC No.

0690C

037103911261

Packaging

Length

Soft and Medium Hard Materials

Product Weight

Boxed

9 in

3/16 in, 5 mm

0.80 lb

C U T T I N G

■■ Parrot-beak jaw with center-cut blades, to grasp wire and staples ■■ Cuts wire, cable, and light chain, up to 3/16" diameter ■■ Soft and med. hard metals up to 1/4" diameter, and medium hard chain lin ■■ Maximum hardness of material to be cut: Brinell 300/ Rockwell C31 ■■ Screw-type adjustment realigns edges ■■ 1-handed operation ■■ Toolbox and pocket size ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable!

961

H A N D

O P E R A T E D

C U T T E R S

Slotted Angle Iron Shear ■■ Used to make braces, shelves, and tables ■■ Lightweight, portable shear ■■ Shear-cut blades ■■ Cuts pre-drilled and slotted angles up to 45° on either leg ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable!

Cat. No.

UPC No.

2790HKP

037103916556

Packaging

Length

Capacity

Replacement Blades Lower Cat No.

Replacement Blades Upper Cat No.

Product Weight

Boxed

38 in

3 in x 1 1/2 in x 1/8 in

2710HK

2711HK

17.70 lb

C U T T I N G

Ratchet-type One Hand Operated Soft Cable Cutter

962

■■ Compact size cutter ■■ Ratchet-type jaws with shear-cut blades ■■ Cuts copper and aluminum cleanly, leaves no burrs or sharp edges ■■ Quick release allows discontinuation of cutting ■■ Stop operation without completing the full cutting cycle ■■ 1-hand operation allows cutting in confined spaces ■■ Patented ratchet design ■■ Fits in toolbox or on toolbelt ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable! Packaging

Length

Frequent Use Copper

Frequent Use Aluminum

Maximum Capacity Copper

Maximum Capacity Aluminum

Product Weight

037103001474

Carded

9 in

500 MCM

600 MCM

750 MCM

1.40 lb

037103001481

Carded

10-1/2 in

600 MCM

1000 MCM

750 MCM

1000 MCM

2.86 lb

Cat. No.

UPC No.

3590FS 5090FS

Compact Ratcheting Cable Cutter ■■ Compact, lightweight cutter, for confined spaces ■■ Ratchet-type jaws with shear-cut blades ■■ Blades grip and hold while moderate pumping action cuts cable ■■ Both blades cut and Leaves no burrs or sharp edges ■■ Fiberglass handles with non-slip, plastic grips ■■ Cutter has self-lubricating ratchet and only 6 moving parts ■■ Note 1: MCM capacity does not include cable insulation ■■ Note 2: MCM capacity equates to conductor size only ■■ Repair Kit: 6912FHA ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable! Cat. No.

UPC No.

6990FHL

037103134394

Packaging

Length

Communication Cable

Copper Cable

Aluminum Cable

Single Core ACSR

Three Core ACSR

Product Weight

Boxed

19 in

653 MCM

336 MCM

4.50 lb

6990FS

037103922526

Boxed

14 in

1-3/16 in, 30 mm

500 MCM

795 MCM

4.15 lb

6990FSL

037103925787

Boxed

19 in

1-3/16 in, 30 mm

750 MCM

795 MCM

4.50 lb

H A N D

O P E R A T E D

C U T T E R S

Ratchet Type, Soft Cable Cutter ■■ Jaw keeper prevents jaws from spreading while under heavy load ■■ Cuts copper and aluminum communications power cable up to 2" ■■ Improved heavy duty jaw design ■■ Built for tough conditions ■■ Ratchet provides up to 5x's the mechanical advantage over manual cutters ■■ Cuts all types of copper and aluminum cables up to 2500MCM ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable!

Cat. No.

UPC No.

8690FSK

037103060105

Packaging

Length

Copper and Aluminum Cable, All Types

Boxed

27-1/2 in

2 in, 51 mm

Replacement Cutterhead/Jaws Cat. No.

Product Weight

8613FSK

12.60 lb

Ratchet Type, Soft Cable Cutter ■■ Shear-cut blades give fast, smooth, shearing cuts ■■ Cuts copper, aluminum ■■ Cuts rubber covered or lead covered power and communications cable to 3" ■■ Ratchet and chain apply increased cutting pressure ■■ Gives increased mechanical advantage over manual cutters ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable! UPC No.

8690CS

037103095411

Packaging

Length

Copper and Aluminum Cable, Power/Comm. Cable

Replacement Cutterhead/Jaws Cat. No.

Product Weight

Boxed

29-3/4 in

3 in, 73 mm

8613CS

12.60 lb

Cat. No.

Ratchet-Type, Hard Cable Cutter

Cat. No.

UPC No.

8690FH

037103923509

C U T T I N G

■■ Jaw keeper prevents jaws from spreading while under heavy load ■■ Shear-cut blades ■■ Ratchet and chain increase cutting pressure as handles open and close ■■ Cuts hard cable, ACSR, ACAR, ZEBRA, and self-supporting telephone cable ■■ Moderate pressure needed to open and close handles ■■ Can be used effectively with short strokes in confined spaces ■■ Increased mechanical advantage over manual cutters ■■ Not recommended for cutting insulated copper or aluminum cable ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable! Packaging

Length

ACSR, ACAR, ZEBRA, and Telephone Cable (Self Supporting)

Replacement Cutterhead/Jaws Cat. No.

Product Weight

Boxed

29-1/4 in

1-3/16 in, 30 mm

8613FH

12.40 lb

963

H A N D

O P E R A T E D

C U T T E R S

Ratchet Type, Guy Strand Cutter ■■ Notched shear-cut blades hold material firmly in place ■■ Ratchet and chain produce easy, progressive cuts ■■ Cuts EHS guy strand, mild steel rods and bolts, and similar materials ■■ Makes clean, square cuts with minimal distortion ■■ Increased mechanical advantage over manual cutters ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable! Cat. No.

UPC No.

8690CK

037103923493

Packaging

Length

EHS Guy Strand

Common Guy Strand

Replacement Cutterhead/Jaws Cat. No.

Product Weight

Boxed

28 in

1/2 in, 13 mm

8613CK

10.34 lb

Ratchet Type, Wire Rope Cutter ■■ Ratchet-type jaws with notched shear-cut blades ■■ Blades hold and lock material in place ■■ Cuts aircraft cable, EHS guy strand, wire rope and stainless steel cable ■■ Increased mechanical advantage over manual cutters ■■ Cuts all strands with minimal crushing or distortion ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable! UPC No.

8690TN

037103923547

Packaging

Length

EHS Guy Strand

Aircraft Cable, Hard Stainless Steel Cable

Replacement Cutterhead/Jaws Cat. No.

Product Weight

Boxed

36 in

5/8 in , 16 mm

5/8 in, 16 mm

8613TN

11.00 lb

Cat. No.

C U T T I N G

Ratchet Type, Soft Cable Cutters

964

■■ Jaws with shear-cut blades with special pivoting handle ■■ Handle allows cutterhead to be opened to maximum width ■■ Cuts copper and aluminum, power and communications cable ■■ Specially designed to cut conductors with large insulation ■■ Maximum handle spread of 22" for working in confined spaces ■■ Advanced cutter gives mechanical advantage of over 50 to 1 ■■ For special applications contact customer service department ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable! Packaging

Copper and Aluminum Cable, Power/Comm. Cable

037103923677

Boxed

037103084736

Boxed

Cat. No.

UPC No.

8790CS 8790FSK

Replacement Cutterhead/Jaws Cat. No.

Product Weight

3 in , 73 mm

8713CS

12.00 lb

2 in, 51 mm

8713FSK

12.00 lb

H A N D

O P E R A T E D

C U T T E R S

Linkmaster® Heavy Duty ■■ Linkmaster ® heavy-duty model ■■ Heat-treated, alloy steel jaws ■■ Opens and closes tire chain cross links ■■ Toggle joints turn 50 lbs hand pressure to 4000 lbs cutting pressure ■■ All steel handles ■■ Makes repairs quickly and easily ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable! Cat. No.

UPC No.

0390MLN

037103909404

Packaging

Length

Replacement Cutterhead/Jaws Cat. No.

Product Weight

Boxed

30 in

0313LKN

8.00 lb

Linksem® Intermediate ■■ Strong, rugged, compact, lightweight cutter ■■ Opens and closes tire chain cross links ON or OFF the tire ■■ Cushion grip handles ■■ Individually packaged with instructions ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable! Cat. No.

UPC No.

1390L

037103913135

Packaging

Length

Capacity Link Diameter

Product Weight

Boxed

13 in

5/16 in, 8 mm

1.35 lb

Net-Link Closer for Closing Chain Links ■■ Used on commercial fishing boats and draggers for net and mooring chains ■■ Designed to close heavy chain link ■■ Toggle joints turn 50 lbs hand pressure to 4000 lbs cutting pressure ■■ Screw-type adjustment realigns edges ■■ Replacement cutterhead: 0213LC ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable! UPC No.

0290MLC

037103908117

Packaging

Length

Capacity Link Diameter

Replacement Cutterhead/Jaws Cat. No.

Product Weight

Boxed

30 in

3/8 in, 10 mm

0213LC

7.80 lb

C U T T I N G

Cat. No.

965

H Y D R A U L I C

C U T T E R

S Y S T E M S

Power Tool Workheads A workhead, sold as a unit, consists of the cutterhead, cylinder and control handle. Cutterheads and control handles are also available separately. In addition, the cutterhead and cylinder are sold as a unit for use with an HKP hand pump or air/hydraulic pump. And, in most cases, the cutterhead, cylinder, connecting hose and hand pump are also sold as a complete unit.

WORKHEAD (For use with any HKP motor-driven hydraulic pump.) CUTTERHEAD, CYLINDER AND CONTROL HANDLE. Purchase as unit.

HAND-OPERATED HYDRAULIC CUTTER SYSTEM

AUTOMATIC SYSTEM PORTABLE POWER PACK

CUTTERHEAD

HAND PUMP, HOSE, CYLINDER AND CUTTERHEAD. Purchase as unit.

(electric/hydraulic pump), HOSE WITH CONTROL CABLE, AND WORKHEAD. Purchase components separately.

Pneumatic Tools

• All HKP air-powered tools require ram lateral input supply of 80-120 psi (6-8 kg/cm2) • 9190 Series: 6.9 CFM or 8 CFM with factor of safety • 9290 Series: 16.2 CFM or 18.7 CFM with factor of safety

Power Tool Selector Chart BY RODS AND BARS

C U T T I N G

Type and size of material to be cut - Maximum Capacity

Cutter Head Assembly Cat. No.

Steel High Carbon to 130,000 lb (58,968 kg) Tensile Rockwell 30

Steel High Alloy to 180,000 lb (81,648 kg) Tensile Rockwell 40

Reinforcing Bars to 75,000 lb (34,020 kg) Tensile to Grade 75

Stainless Steel to 180,000 lb (81,648 kg) Tensile to Rockwell 40

Chain High Alloy to 180,000 lb (81,648 kg) Tensile to Rockwell 40

Aluminum / Brass / Copper, Rod / Bar

inch

W75000

3/4

5/8

3/4

1-1/8

W11800

1-1/8

W1770A

9/16

1/2

W1770CD

5/8

9/16

W1770TC

966

Steel Low Carbon to 90,000 lb (40,824 kg) Tensile Rockwell 15

Do Not Cut

1/2

Do Not Cut

1/2

7/16

Do Not Cut

5/16

9190C

3/8

5/16

9190NE

3/8

5/16

9190A

3/8

9190C

1/2

3/8

9290NE

1/2

3/8

Do Not Cut

3/8

Do Not Cut

3/8

Do Not Cut

3/8

1/2

3/8

Do Not Cut

3/8

Do Not Cut

3/8

Do Not Cut

H Y D R A U L I C

C U T T E R

S Y S T E M S

BY CABLE Type and size of material to be cut - Maximum Capacity

Cutter Head Assembly Cat. No.

Copper Power Cable

Communication Cable (not self-support)

inch

W177089

3-1/2

W1770TN

3/4

19 102

Do Not Cut

ACSR and ACAR Cable inch

Do Not Cut 3/4

Common Guy Strand Cable

Aluminum Power Cable

EHS Guy Strand Cable

inch

Do Not Cut

3/4

inch

WTC400C

Do Not Cut

WRC125

Do Not Cut

WRC200

Do Not Cut

HRC300 27842

Do Not Cut 7/8

102

7/8

102

Wire Rope, Hard Including Stainless

Do Not Cut 3/8

Do Not Cut

3/4

inch

Do Not Cut 3/4

Do Not Cut 1-1/4

Do Not Cut

7/8

Pump Selection Cat. No.

Material

HKHO2 Hand Pump

HKA01 Air / Hydraulic

HKE0501A 1/2 HP

HKE075 Series 3/4 HP

HKI150 Series 1-1/2 HP

HKE500 Series 5 HP

WTC400C

4" Power Cable

50 Sec.

10 Sec.

15 Sec.

9 Sec.

5 Sec.

2-3 Sec.

WTC400C

4" Comm. Cable

45 Sec.

10 Sec.

9 Sec.

5 Sec.

2-3 Sec.

WTC400C

4" Aluminum

40 Sec.

10 Sec.

9 Sec.

5 Sec.

2-3 Sec.

WRC125

1" Common Guy

35 Sec.

15 Sec.

8 Sec.

4 Sec.

2-3 Sec.

WRC125

3/4" EHS Guy

65 Sec.

10 Sec.

9 Sec.

5 Sec.

2-3 Sec.

1-1/4" Wire Rope

35 Sec.

15 Sec.

12 Sec.

5 Sec.

2-3 Sec.

2" Wire Rope

45 Sec.

60 Sec.

40 Sec.

25 Sec.

2-3 Sec.

W11800

1-1/8" Low Carbon Steel

Not Recommended

25 Sec.

19 Sec.

8 Sec.

W11800

1-1/8" High Carbon Steel

Not Recommended

25 Sec.

19 Sec.

8 Sec.

W11800

1" High Alloy Steel

Not Recommended

30 Sec.

25 Sec.

19 Sec.

10 Sec.

W11800

1" Stainless Steel

Not Recommended

30 Sec.

25 Sec.

19 Sec.

0 Sec.

W11800

1" Aluminum

Not Recommended

30 Sec.

25 Sec.

19 Sec.

8 Sec.

W75000

Low Carbon Steel 3/4" 90,000 Tensile

10 Sec.

7 Sec.

3 Sec.

20 Sec.

High Carbon Steel 3/4" 130,000 Tensile 5/8" High Alloy 180,000 Tensile

25 Sec.

W75000

5/8" Rebar

20 Sec.

W75000

5/8" Stainless Steel 180,000 Tensile

40 Sec.

15 Sec.

Not Recommended

3 Sec.

18 Sec.

10 Sec.

7 Sec.

3-4 Sec.

3 Sec.

15 Sec.

7 Sec.

4 Sec.

2-3 Sec.

30 Sec.

18 Sec.

15 Sec.

9 Sec.

3 Sec.

W75000

3/4" Aluminum Rod

30 Sec.

15 Sec.

7 Sec.

3 Sec.

2-3 Sec.

W1770A

9/16" Low Carbon

25 Sec.

10 Sec.

8 Sec.

7 Sec.

4 Sec.

2-3 Sec.

W1770A

1/2" High Carbon

30 Sec.

12 Sec.

7 Sec.

4 Sec.

2-3 Sec.

W1770CD

5/8" Low Carbon

35 Sec.

10 Sec.

15 Sec.

7 Sec.

3 Sec.

2-3 Sec.

W1770TC

1/2" High Alloy

37 Sec.

10 Sec.

7 Sec.

4 Sec.

2-3 Sec.

W1770TC

1/2" Rebar

35 Sec.

10 Sec.

8 Sec.

5 Sec.

2-3 Sec.

W1770TC

1/2" Stainless Steel

37 Sec.

10 Sec.

7 Sec.

4 Sec.

2-3 Sec.

W177089

3" Copper Power Cable

60 Sec.

19 Sec.

15 Sec.

10 Sec.

5 Sec.

2-3 Sec.

W177089

3" Comm. Cable

60 Sec.

19 Sec.

15 Sec.

10 Sec.

5 Sec.

2-3 Sec.

W177089

3" Aluminium Cable

60 Sec.

19 Sec.

15 Sec.

10 Sec.

5 Sec.

2-3 Sec.

W1770TN

3/4" Wire Rope

35 Sec.

10 Sec.

12 Sec.

10 Sec.

5 Sec.

2-3 Sec.

C U T T I N G

W75000 W75000

WRC125 WRC200

967

H Y D R A U L I C

C U T T E R

S Y S T E M S

Ordering Replacement Parts Order replacement parts through your Apex Tool Group Distributor. Care should be taken to give accurate information regarding part numbers and descriptions. Include product model numbers and serial numbers as well. Although all parts are available at the factory, some may be available in a parts kit format only. It is recommended customers stock spare blades, seals, filters and oil to minimize delay in maintaining units.

Operating Hydraulic Pumps Below - 25°F (-31°C) All HKP pumps are supplied with a high quality hydraulic oil. Pour point -25°F (-31°C) 150/165 viscosity SSU @ 100°F (38°C). When operating below -25°F, contact Apex Tool Group Customer Service for oil recommendation. Before initial operation, please inspect product to identify any potential damage, or oil leakage, caused during shipment.

Factory Repair Service HKP units may be returned to factory for repair and reconditioning at any time. A free inspection and estimate of repair charges will be supplied if requested. All returns must be made by prepaid transportation and contact information such as name, address and daytime phone number supplied. Failure to supply this information may result in product repair delay. Any Enerpac branded pumps should be returned to an authorized Enerpac service center for repair and reconditioning, go to www.enerpac.com to find your closest authorized service center.

Installation Recommendations IMPORTANT: Electrical connections on cutterhead and hydraulic hose are for low voltage control only. DO NOT PLUG CONTROL HANDLE INTO MAIN POWER SUPPLY. The switches and wiring are designed for relay control only.

HKE075 series single phase Power Pack units are factory wired to run in counterclockwise direction and can be plugged into any outlet with proper power supply. Three phase units must be wired into customer’s system. Be sure to wire so unit runs counterclockwise. HKE1502A and HKE500 series Hydraulic Power Sources are supplied in three phase only and can be wired to operate in either direction. Try to install units so that hoses and wiring are not accessible to damage by fork lifts or other handling equipment. When installing pumping unit overhead, be sure to have both cutterhead and hoses well below the pump. Do not loop hoses overhead as air pockets will result in slow reaction. Speed of cut should be approximately that indicated on the POWER TOOL SELECTOR CHART. If unit is cutting slower than indicated, DO NOT ADJUST RELIEF VALVE. THE PRESSURE SETTING WILL NOT AFFECT THE SPEED.

C U T T I N G

We recommend checking all connections for leaks, check for voltage drop or contact Customer Service for assistance.

968

Power Tool Hoses & Accessories • All HKP hydraulic hoses are made from oil-and abrasion-resistant materials • Hose style also offered in 1/4” or 3/8” sizes • Hoses are 2-ply rated, reinforced with two braids of high tensile steel wire and covered with oil and weather resistant rubber • MSHA approved, 2-wire steel braid with 3/8” (10mm) – 18 NPTF fittings • Only order enough hose to fit your particular application. Using too much hose, slows operator and production • All control wire hoses come complete with 3-wire, twist-lock connectors for low-voltage control only • Couplings not included with hoses

H Y D R A U L I C

C U T T E R

S Y S T E M S

Hydraulic Rod and Bar Cutter System ■■ Excellent for semi-production cutting ■■ Lightweight cutter ■■ Center-cut blades ■■ Cuts No. 4 rebar, soft, medium, and hard materials to 1/2" (13 mm) ■■ Maximum hardness of material to be cut: Brinell 455/Rockwell C48 ■■ Lockplate keeps jaws from loosening Cat. No.

UPC No.

1790CDX

037103914835

Packaging

Replacement Jaws/Heads/Blades Cat No.

Product Weight

Boxed

1713CDX

37.00 lb

Cat. No.

Description

Cat. No.

Description

1713CDX

Cutterhead

BU1405

Hydraulic Hose for HKH02 and HKA01 (7 ft)

1752HK

Cylinder Assembly

HKH02

Two Speed Hand Hydraulic Pump

Hydraulic Wire Rope Cutter System ■■ Makes clean, even cuts with no distortion ■■ Notched blade holds wire rope or cable securely ■■ Cuts hard or soft wire rope and cable to 3/4" (19 mm) ■■ Not recommended for copper or aluminum power cable ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable!

UPC No.

Packaging

Replacement Jaws/Heads/Blades Cat No.

Product Weight

1790TN

037103914903

Boxed

1713TN

40.60 lb

Cat. No.

Description

Cat. No.

Description

1713TN

Cutterhead

BU1405

Hydraulic Hose for HKH02 and HKA01 (7 ft)

1752HK

Cylinder Assembly

HKH02

Two Speed Hand Hydraulic Pump

Cat. No.

Hydraulic Cable Cutter System C U T T I N G

■■ Shear-cut blades ■■ Cuts soft copper or aluminum cable and lead ■■ Also cuts rubber-covered power and communications cable ■■ Do NOT cut ACSR or steel cable to 3" (76 mm) ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable! Cat. No.

UPC No.

179089

037103914910

Packaging

Capacity

Replacement Jaws/Heads/Blades Cat No.

Product Weight

Boxed

3 in, 76 mm

8913CN

32.50 lb

Cat. No.

Description

Cat. No.

Description

1753

Cylinder Assembly

BU1405

Hydraulic Hose for HKH02 and HKA01 (7 ft)

8913CN

Cutterhead

HKH02

Two Speed Hand Hydraulic Pump

969

H Y D R A U L I C

C U T T E R

S Y S T E M S

Hydraulic Cutter with Carbide Jaw Edges System ■■ Recommended for special cutting applications ■■ Cuts material exceeding Brinell 400/Rockwell C42 ■■ Carbide-tipped blades ■■ Cuts hard-alloy and case-hardened chain and extremely hard material to 1/2" (13 mm) ■■ Cuts one side of link at a time ■■ Lockplate keeps jaws from loosening ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable! Cat. No.

UPC No.

1790TC

037103914880

Packaging

Replacement Jaws/Heads/Blades Cat No.

Product Weight

Boxed

1713TC

43.70 lb

Cat. No.

Description

Cat. No.

Description

1713TC

Cutterhead

BU1405

Hydraulic Hose for HKH02 and HKA01 (7 ft)

1752HK

Cylinder Assembly

HKH02

Two Speed Hand Hydraulic Pump

Hydraulic Soft Nut Splitter System (48mm)

■■ Center-cut blades swivel 360° to allow cutting in confined spaces ■■ Cuts soft nuts, Rockwell C15 ■■ Do NOT cut hard nuts ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable! Cat. No.

UPC No.

Packaging

Capacity

Replacement Jaws/Heads/Blades Cat No.

Product Weight

1790PQ

037103914859

Boxed

1 7/8 in. Across the Flats

1713PQ

47.20 lb

Cat. No.

Description

Cat. No.

Description

1713PQ

Cutterhead

BU1405

Hydraulic Hose for HKH02 and HKA01 (7 ft)

1753

Cylinder Assembly

HKH02

Two Speed Hand Hydraulic Pump

C U T T I N G

Hydraulic Strip Shear Cutter System

970

■■ Recommended for fast, production cutting of steel strapping ■■ Shear-cut blades ■■ Cuts flat steel strap 1/4" (6 mm) x 1 1/2" (38 mm) ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable!

Cat. No.

UPC No.

Packaging

Replacement Jaws/Heads/Blades Cat No.

Product Weight

1790T

037103914866

Boxed

1713T

42.00 lb

Cat. No.

Description

Cat. No.

Description

1713T

Cutterhead

HKH02

Two Speed Hand Hydraulic Pump

BU1405

Hydraulic Hose for HKH02 and HKA01 (7 ft)

P1754

Cylinder Assembly

H Y D R A U L I C

C U T T E R

S Y S T E M S

Hydraulic Tire Bead Cutter System ■■ Destroys old or new substandard tires ■■ Cuts tire bead on all passenger and light truck tires ■■ Prevents reuse of tires & insures proper destruction of defective tires ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable! Cat. No.

UPC No.

Packaging

Replacement Jaws/Heads/Blades Cat No.

Product Weight

1790TA

037103914873

Boxed

1713TA

44.00 lb

Cat. No.

Description

Cat. No.

Description

1713TA

Cutterhead

BU1405

Hydraulic Hose for HKH02 and HKA01 (7 ft)

1753

Cylinder Assembly

HKH02

Two Speed Hand Hydraulic Pump

Hydraulic Iron Grating Cutter System ■■ Cutter can be used with any HKP power pack for quick, efficient cutting ■■ Special jaws fit between iron gratings ■■ Cuts iron grating to 1-1/4" thick ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable! UPC No.

Packaging

Replacement Jaws/Heads/Blades Cat No.

Product Weight

1790TG

037103914897

Boxed

1713TG

43.00 lb

Cat. No.

Description

Cat. No.

Description

1713TG

Cutterhead

BU1405

Hydraulic Hose for HKH02 and HKA01 (7 ft)

1752HK

Cylinder Assembly

HKH02

Two Speed Hand Hydraulic Pump

Cat. No.

Tire Chain Repair System

Cat. No.

UPC No.

WTC200A

037103106759

Packaging

Replacement Jaws/Heads/Blades Cat No.

Product Weight

Boxed

1713TC for 1780TC, 1713LK for 1780LK

138.00 lb

C U T T I N G

■■ Ideal for fast truck chain maintenance by fleet operators ■■ Mounts on platform or mobile cart ■■ Opens, closes, and cuts up to 1/2" alloy chain, case-hardened chain, and padlock hasps ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable!

Cat. No.

Description

Qty.

Cat. No.

Description

Qty.

1780LK

Hydraulic Linkmaster® Workhead

BU1405

Hydraulic Hose for HKH02 and HKA01 (7 ft)

HKE0751B

HKE075 Series, 3/4-HP Power Pack Only - Operation of Two Workheads

1780TC

Hydraulic Cutter with Carbide jaw Edges Workhead Assembly

971

H Y D R A U L I C

C U T T E R

W O R K H E A D S

Hydraulic Rod and Bar Cutter Workhead ■■ Excellent for semi-production cutting ■■ Lightweight cutter ■■ Center-cut blades ■■ Cuts No. 4 rebar, soft, medium, and hard materials to 1/2" (13mm) ■■ Maximum hardness of material to be cut: Brinell 455/ Rockwell C48 ■■ Lockplate keeps jaws from loosening ■■ Can be used with any HKP electric/hydraulic pump ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable! Cat. No.

UPC No.

Packaging

Includes

Product Weight

1780CDX

037103914712

Boxed

(B) cylinder assembly (1752), (C) cutterhead (1713CDX) only

24.20 lb

W1770CD

037103904287

Boxed

(A) control handle (W10824), (B) cylinder assembly (1752), (C) cutterhead (1713CDX) only

27.00 lb

Hydraulic Wire Rope Cutter Workhead

■■ Makes clean, even cuts with no distortion ■■ Notched blade holds wire rope or cable securely ■■ Cuts hard or soft wire rope and cableto 3/4" (19mm) ■■ Not recommended for copper or aluminum power cable ■■ Can be used with any HKP electric/hydraulic pump ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable!

Cat. No.

UPC No.

Packaging

Includes

Product Weight

1780TN

037103914774

Boxed

(B) cylinder assembly (1752), (C) cutterhead (1713TN) only

15.00 lb

W1770TN

037103904379

Boxed

(A) control handle (W10824), (B) cylinder assembly (1752), (C) cutterhead (1713TN)

22.30 lb

C U T T I N G

Hydraulic, Angular Rod and Bar Cutter Workhead

972

■■ Makes flush cuts in confined spaces ■■ Angular jaws with clipper-cut blades ■■ Cuts soft metal to 9/16" (14mm) or medium metal to 1/2" (13mm) ■■ Lockplate keeps jaws from loosening ■■ Angle of cutterhead keeps tool and users hands clear of work surface ■■ Do NOT cut hard material ■■ Can be used with any HKP electric/hydraulic pump ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable! Cat. No.

UPC No.

Packaging

Replacement Jaws/Heads/Blades Cat No.

Includes

Product Weight

1780A

037103914699

Boxed

1713A

(B) cylinder assembly (1752), (C) cutterhead (P1713A) only

18.00 lb

W1770A

037103904263

Boxed

1713A

(A) control handle (W10824), (B) cylinder assembly (1752), (C) cutterhead (P1713A)

22.14 lb

H Y D R A U L I C

C U T T E R

W O R K H E A D S

Hydraulic Cable Cutter Workhead ■■ Shear-cut blades ■■ Cuts soft copper or aluminum cable and lead to 3" (76mm) ■■ Also cuts rubber-covered power and communications cable ■■ Do NOT cut ACSR or steel cable ■■ Can be used with any HKP electric/hydraulic pump ■■ For Soft Copper or Aluminum Cable to 3" (76mm) ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable! Cat. No.

UPC No.

178089

037103914781

W177089

Packaging

Replacement Jaws/Heads/ Blades Cat No.

Boxed

037103904386

Boxed

Includes

Product Weight

8913CN

(B) cylinder assembly (1753), (C) cutterhead (8913CN) only

22.20 lb

8913CN

(A) control handle (W10824), (B) cylinder assembly (1753), (C) cutterhead (8913CN)

19.90 lb

Hydraulic Cutter with Carbide Jaw Edges Workhead

■■ Recommended for special cutting applications ■■ Cuts material exceeding Brinell 400/Rockwell C42 ■■ Carbide-tipped blades ■■ Cuts hard-alloy and case-hardened chain and extremely hard material to 1/2” (13mm) ■■ Cuts one side of link at a time ■■ Lockplate keeps jaws from loosening ■■ Can be used with any HKP electric/hydraulic pump ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable! Cat. No.

UPC No.

Packaging

Capacity

Includes

Product Weight

1780TC

037103914750

Boxed

1/2" / 13mm

(B) cylinder assembly (1752), (C) cutterhead (1713TC) only

22.50 lb

W1770TC

037103904355

Boxed

1/2" / 13mm

(A) control handle (W10824), (B) cylinder assembly (1752), (C) cutterhead with guard (1713TC)

25.70 lb

Hydraulic Soft Nut Splitter Workhead (48mm) C U T T I N G

■■ Center-cut blades swivel 360° to allow cutting in confined spaces ■■ Cuts soft nuts up to 1 7/8”, Rockwell C15 ■■ Do NOT cut hard nuts ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable!

Cat. No.

UPC No.

1780PQ

037103914729

Packaging

Includes

Product Weight

Boxed

(B) cylinder assembly (1753), (C) cutterhead (1713PQ) only

26.10 lb

973

H Y D R A U L I C

C U T T E R

W O R K H E A D S

Hydraulic Strip Shear Cutter Workhead ■■ Recommended for fast, production cutting of steel strapping ■■ Shear-cut blades ■■ Cuts flat steel strap 1/4” (6mm) x 1 1/2” (38mm) ■■ Can be used with any HKP electric/hydraulic pump ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable!

Cat. No.

UPC No.

Packaging

Includes

Product Weight

1780T

037103914736

Boxed

(B) cylinder assembly (P1754), (C) cutterhead (1713T) only

15.00 lb

W1770T

037103904324

Boxed

(A) control handle (W10824), (B) cylinder assembly (P1754), (C) cutterhead (1713T)

22.00 lb

Hydraulic Tire Bead Cutter Workhead

■■ Destroys old or new substandard tires ■■ Cuts tire bead on all passenger and light truck tires ■■ Prevents reuse of tires & insures proper destruction of defective tires ■■ Includes W10824 control handle, 1753 cylinder assembly ■■ Includes 1713TA cutterhead ■■ Can be used with any HKP electric/hydraulic pump ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable! Cat. No.

UPC No.

Packaging

Includes

1780TA

037103914743

Boxed

(B) cylinder assembly (1753), (C) cutterhead (1713TA)

Product Weight

17.00 lb

W1770TA

037103904331

Boxed

(A) control handle (W10824), (B) cylinder assembly (1753), (C) cutterhead (1713TA)

24.00 lb

C U T T I N G

Hydraulic Iron Grating Cutter Workhead

974

■■ Cutter can be used with any HKP power pack for quick, efficient cutting ■■ Special jaws fit between iron gratings ■■ Cuts iron grating to 1 1/4” thick ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable!

Cat. No.

UPC No.

Packaging

Includes

Product Weight

1780TG

037103914767

Boxed

(B) cylinder assembly (1752), (C) cutterhead (1713TG) only

15.00 lb

W1770TG

037103904362

Boxed

(A) control handle (W10824), (B) cylinder assembly (1752), (C) cutterhead with guard (1713TG)

22.00 lb

H Y D R A U L I C

C U T T E R

W O R K H E A D S

Hydraulic Rod and Bar Cutter Workhead ■■ Compact, rugged, portable cutter ■■ Easily replaceable or redressable blades ■■ Cuts rods and bars ■■ 1-hose operation ■■ Replacement stationary blade: 13234 ■■ Replacement blamovingde: 13934 ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable!

Cat. No.

UPC No.

Packaging

Capacity

Thrust

Product Weight

W11800

037103904119

Boxed

7-1/2 in

12-3/4 in

5 in

5-1/2 in

5 in

1-1/8 in, 29 mm

70000 lb

46.70 lb

W75000

037103904447

Boxed

15 in

9-3/4 in

4-1/4 in

5 in

3/4 in, 19 mm

25000 lb

20.40 lb

Hydraulic Rod and Bar Cutters Replacement Cutter Blades Cat. No.

UPC No.

13234

037103912886

13934

037103913203

75000B

Packaging

Description

Replacement Part for

Product Weight

Boxed

Stationary Blade

W75000

0.58 lb

Boxed

Moving Blade

W75000

0.46 lb

Boxed

Cutter Head & Cyclinder, No Handle

W75000

17.02 lb

037103913180

Boxed

Stationary Blade

W11800

1.61 lb

13908

037103913173

Boxed

Moving Blade

W11800

0.92 lb

11800B

037103234964

Boxed

Cutter Head & Cylinder, No Handle

W11800

1.00 lb

13918

Hydraulic Wire Rope Cutter Workhead

Packaging

Capacity

Replacement Jaws/Heads/ Blades Cat No.

Width

Thrust

Product Weight

037103901132

Boxed

21-1/2 in

8-1/2 in

6-5/8 in

3 in, 76 mm

RT=39004 LT=39014 Mov=37378

6-1/2 in

140000 lb

154.00 lb

WRC125

037103903983

Boxed

11 in

5-1/4 in

3-1/4 in

1-1/4 in, 32 mm

RT=34158 LT=34148 Mov=34138

3 in

25000 lb

26.00 lb

WRC200

037103903990

Boxed

16 in

6-1/2 in

5 in

2 in, 51 mm

RT=35224 LT=35204 MOV=35168

4-1/2 in

70000 lb

60.00 lb

Cat. No.

UPC No.

HRC300

C U T T I N G

■■ Use for production cutting of wire rope and cable ■■ Loads through the front to allow cuts anywhere on the wire rope or cable ■■ Control handle not available ■■ Do NOT cut cable smaller than 1/2 in ■■ Has double-acting cylinder, uses a "B" or "C" suffix pump ■■ Thrust: 140,000 lb ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable!

975

H Y D R A U L I C

C U T T E R

W O R K H E A D S

Hydraulic Soft Cable Cutter Workhead ■■ Shear-cut blades ■■ Cuts aluminum or copper power and communications cable ■■ Toggle design gives extra power for cutting large, tough cable ■■ Keeper ensures clean, shearing cuts of fine strands ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable!

Cat. No.

UPC No.

WTC400C

037103904041

Packaging

Capacity

Replacement Jaws/Heads/ Blades Cat No.

Width

Thrust

Product Weight

Boxed

29 in

11 in

2-1/2 in

4 in, 102 mm

1713CN

2-1/2 in

22000 lb

27.00 lb

Hydraulic Rod and Bar Cutter Workhead

■■ Positioning cam keeps stock square to jaws ■■ Gives flush, square cuts instead of conventional, chisel-type cuts ■■ Shear-cut blades ■■ Cuts soft and medium material ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable!

Cat. No.

UPC No.

W118SQ

037103904102

Packaging

Capacity

Replacement Jaws/Heads/Blades Cat No.

Width

Product Weight

Boxed

17-1/2 in

12-3/4 in

5 in

5-1/2 in

5 in

7/8 in, 22 mm

Stationary 22178 / Moving 22168

5-7/8 in

42.00 lb

C U T T I N G

Hydraulic Rod, Bar and Wire Straightener Workhead ■■ Straightens coiled steel ■■ Straightens the leading 4' to 5' of coiled steel ■■ Material ready to insert into drawing or cold-heading machine ■■ Includes W10904 control handle ■■ Anvils available for 7/8" square stock ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable!

Cat. No.

W106920

976

UPC No.

037103904072

Packaging

Boxed

14-1/2 in

Capacity

Replacement Jaws/Heads/Blades Cat No.

Thrust

Product Weight

8 in

9/16 in to 1-1/4 in, 14 mm to 32 mm

2 Stationary 10568 / Moving 10558

25000 lb

25.10 lb

H Y D R A U L I C

C U T T E R

W O R K H E A D S

Hydraulic Pipe Cutter Workhead ■■ Nuclear reactor maintenance tool ■■ Cuts Schedule 40 pipe, including stainless steel ■■ Double-acting cylinder requires 2-outlet B or C suffix pump ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable!

Cat. No.

37071

UPC No.

Packaging

037103919601

Boxed

22 in

Capacity

Replacement Jaws/Heads/Blades Cat No.

Thrust

Product Weight

9 in

2.00 in, 51 mm

Stationary 41238/Moving 41228

70000 lb

83.00 lb

Hydraulic Tire Bead Cutter Workhead ■■ Rugged, heavy-duty, dependable tire bead cutter ■■ Cuts bead on substandard, new or used tires ■■ Cuts ACSR as an Open Throat cutter ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable! ■■ 45601DH is made to Order Contact Customer Service for Availability ■■ 45601DH is made from 45601 Workhead and W25232 Dual Control Handle

Cat. No.

UPC No.

Packaging

Capacity

Thrust

Product Weight

30000 lb

34.00 lb

45601

037103921215

Boxed

20 in

12-1/2 in

4 in

2.00 in X 2-3/4 in, 51 mm X 70 mm

45601DH

037103144133

Boxed

C U T T I N G

977

H Y D R A U L I C

P U M P S

Hydraulic Pump Nomenclature HK

050

TYPE

PUMP HP

VOLTAGE

VALVE OPTIONS

H - Hard A - Air over hydraulic E - Electric

050 - 1/2 HP 075 - 3/4 HP 150 - 1-1/2 HP 500 - 5 HP

1 - 115 V 2 - 230 V 4 - 460V

A - Single outlet, remote control B - Double outlet, manual control C - Double outlet, remote control

Hydraulic Pumps, Manual Hand ■■ Two speed operation reduces handle strokes by 78% in some cases ■■ Durable glass filled nylon reservoir resists corrosion ■■ Internal pressure relief valves to protect hydraulic systems ■■ Non-conductive fiberglass handle locks for easy carrying ■■ Reduced handle effort ■■ Pressure levels set for safe use with all H.K. Porter® cutting tools ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable! UPC No.

HKH02

037103122537

Packaging

Type

Product Weight

Boxed

Manual Hand Pump

9.80 lb

Packaging

Type

Product Weight

Boxed

Air/Hydraulic

15.75 lb

Cat. No.

C U T T I N G

Hydraulic Pumps, Air Hydraulic

978

■■ Portable, lightweight ■■ Horizontal or vertical operation ■■ Powers all single action HKP workheads ■■ Operates on maximum 150 PSI line pressure ■■ Air & hydraulic inlet filters reduce potential damage from contamination ■■ Reduced noise ■■ Pressure levels set for safe use with all H.K. Porter® cutting tools ■■ Cutterhead assemblies must be ordered separately ■■ Valve function: Advance-Hold-Retract ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable! Cat. No.

UPC No.

HKA01

037103122544

H Y D R A U L I C

P U M P S

Hydraulic Pumps ■■ Lightweight design, rugged construction ■■ 2-stage pump delivers low pressure for rapid advance of piston ■■ Pump shifts to high pressure under load. Large, 1 gallon reservoir ■■ Internal relief valve protects system components from overload ■■ Internal filter protects system from contamination of hydraulic oil ■■ Control option A: Push-button control handle attached to workhead W10824 ■■ Control option B: Heavy-duty foot switch W32368 ■■ Control option C: Hand-held, control switch W36048 ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable! Cat. No.

UPC No.

HE4405A

037103901019

Packaging

Horsepower

Voltage/Phase/Hertz

Product Weight

Boxed

1-1/2 HP

230 V 3 PH 60 Hz

115.00 lb

HKE0501A

037103238238

Boxed

1/2 HP

115 V 1 PH 60 Hz

35.00 lb

HKE0751A

037103238245

Boxed

3/4 HP

115 V 1 PH 60 Hz

135.00 lb

HKE0751B

037103238252

Boxed

3/4 HP

115 V 1 PH 60 Hz

135.00 lb

HKE0751C

037103238269

Boxed

3/4 HP

115 V 1 PH 60 Hz

135.00 lb

HKE1501A

037103238276

Boxed

1-1/2 HP

115 V 1 PH 60 Hz

137.00 lb

HKE1501C

037103240903

Boxed

1-1/2 HP

115 V 1 PH 60 Hz

137.00 lb

HKE1502A

037103238283

Boxed

1-1/2 HP

230 V 3 PH 60 Hz

137.00 lb

HKE5002A

037103238290

Boxed

5 HP

230 V 3 PH 60 Hz

215.00 lb

HKE5002C

037103238306

Boxed

5 HP

230 V 3 PH 60 Hz

215.00 lb

HKE5004A

037103238313

Boxed

5 HP

460 V 3 PH 60 Hz

215.00 lb

HKE5004C

037103238320

Boxed

5 HP

460 V 3 PH 60 Hz

215.00 lb

Hydraulic Hose and Control Wire

Cat. No.

UPC No.

Packaging

Hose Length

Hose Inside Diameter

Product Weight

Shelf Pack Qty.

W119581

037103904133

Boxed

20 ft, 6.1 m

3/8 in, 10 mm

10.46 lb

W119587

037103904195

Boxed

50 ft, 15.2 m

3/8 in, 10 mm

23.00 lb

W119681

037103904201

Boxed

10 ft, 3 m

3/8 in, 10 mm

7.00 lb

C U T T I N G

■■ Use hose and control wire for remote control ■■ 3-wire, twist-lock connectors ■■ Low voltage control, only ■■ Couplings not included (BU1606, BU1604, BU1605) ■■ Excess hose will slow operation, lack of hose will limit mobility ■■ Features hose guard to prevent kinking ■■ Hose ID is 3/8" ■■ Special hoses available on request ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable!

979

H Y D R A U L I C

A C C E S S E S O R I E S

Hydraulic Hose for HKH02 and HKA01 ■■ Couplings not included ■■ Excess hose will slow operation, lack of hose will limit mobility ■■ Order hose to fit specific applications ■■ Features hose guard to prevent kinking ■■ Special hoses available on request ■■ Hose ID is 3/8" ■■ To be used with HKH02 or HKA01 pumps Cat. No.

UPC No.

BU1405

037103900722

Hose Length

Hose Inside Diameter

Product Weight

Shelf Pack Qty.

7 ft, 2 m

3/8 in, 10 mm

4.40 lb

Hydraulic Hose Couplers ■■ Quick detach couplers ■■ Use with hand-hydraulic pump (HKH02) or air/hydraulic pump (HKA01) ■■ 3/8" - 18 NPTF ■■ Shortens workhead switching time ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable! Cat. No.

UPC No.

Packaging

Product Weight

BU1604

037103900753

Boxed

0.51 lb

Shelf Pack Qty.

BU1605

037103900760

Boxed

0.30 lb

BU1606

037103900777

Boxed

0.21 lb

Hydraulic Hose Couplers Swivel Disconnect ■■ Heavy-duty, swivel disconnect couplers ■■ Use with all HKP workheads ■■ Designed for comfortable, efficient positioning of workheads ■■ 3/8" - 18 NPTF

C U T T I N G

Cat. No.

UPC No.

Packaging

Product Weight

Shelf Pack Qty.

20868

037103915085

Boxed

0.72 lb

23628

037103915658

Boxed

0.23 lb

23638

037103915665

Boxed

0.49 lb

Control Handle 1-Handed ■■ Standard on all units except as noted ■■ 1-handed control with guard and fingertip button

980

Cat. No.

UPC No.

W10824

037103904089

Packaging

Product Weight

Boxed

5-3/4 in

7 in

1-1/2 in

3.00 lb

H Y D R A U L I C

A C C E S S O R I E S

Control Handles 2-Handed ■■ “Parallel” or “in-line” design ■■ 2-handed control ■■ Requires operator to push 2 control buttons to operate workhead ■■ Keeps hands out of cutting area ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable! Cat. No.

UPC No.

W25232

037103904393

Packaging

Product Weight

Boxed

12-3/4 in

7 in

1-1/2 in

8.00 lb

Optional Controls Heavy Duty Electric Foot Switch ■■ Heavy guard prevents accidental activation of workhead ■■ Includes 10' (3084mm) of control cord ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable!

Cat. No.

UPC No.

W32368

037103904416

Packaging

Product Weight

Boxed

12.00 lb

Optional Controls Electric Solenoid-Operated Air Valve ■■ For extra fast operation of air actuated tools ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable!

UPC No.

W37048

037103904430

Packaging

Product Weight

Boxed

6.00 lb

Optional Controls Heavy Duty Air Foot Switch

C U T T I N G

Cat. No.

■■ For use with 9190 or 9290 series rod cutters and 27842 cable cutter ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable!

Cat. No.

UPC No.

34468

037103919106

Packaging

Product Weight

Boxed

3 lb

981

P N E U M A T I C

C U T T E R S

Light Duty Pneumatic Cutters ■■ Lightweight model for 80-120 psi ■■ Used in the wire-shelving industry ■■ No exhaust shock ■■ Angular jaws ■■ Cuts soft, or medium materials ■■ Light duty workhead has 4" bore (102mm) and 2" stroke (51mm) ■■ Cutting controlled by manual pressure ■■ Filter-lubricator units recommended in air supply line-long tool service ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable! Cat. No.

UPC No.

Packaging

Description

Capacity

Product Weight

9190A 9190C

037103924452

Boxed

Light duty, Angular Cut

15 in

7-1/4 in

3-1/8 in

3/8 in, 10 mm

16.35 lb

037103924476

Boxed

Light duty, Center Cut

15 in

7-1/4 in

3-1/8 in

3/8 in, 10 mm

11.00 lb

9190CL

037103144379

Boxed

Light duty, Center Cut

15 in

7-1/4 in

3-1/8 in

3/8 in, 10 mm

15.50 lb

9190NE

037103924513

Boxed

Light duty, Clipper Cut

15 in

7-1/4 in

3-1/8 in

3/8 in, 10 mm

14.80 lb

C U T T I N G

Heavy Duty Pneumatic Cutters

982

■■ Heavy-duty model for 90-130 psi ■■ Used in the wire-shelving industry ■■ No exhaust shock ■■ Clipper cut jaws ■■ Cuts soft, medium, or hard materials ■■ Heavy-duty workhead has 5" bore (127mm) and 3" stroke (76mm) ■■ Cutting controlled by manual pressure ■■ Filter-lubricator units recommended in air supply line-long tool service ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable! Cat. No.

UPC No.

Packaging

Description

Capacity

Product Weight

9290C

037103924988

Boxed

Heavy Duty, Center Cut

17-1/2 in

10 in

3-3/4 in

1/2 in, 13 mm

18.25 lb

9290NE

037103924995

Boxed

Heavy Duty, Clipper Cut

17-1/2 in

10 in

3-3/4 in

1/2 in, 13 mm

24.70 lb

Cable Cutter ■■ Extremely fast cutter ■■ Cuts copper or aluminum cable ■■ Operates on 80-100 psi (6-7 kg/cm2) ■■ Control valve: 34468, air/foot switch ■■ Control valve: W37048, solenoid-operated (electric) foot switch ■■ Specify control valve when ordering ■■ NEVER use any H.K. Porter cutters on energized circuits, wire, or cable! Cat. No.

UPC No.

27842

037103916501

Packaging

Capacity

Product Weight

Boxed

6-3/4 in

8 in

13 in

7/8 in, 23 mm

27.00 lb

R A T C H E T I N G

T A P S

A N D

D I E S

114 Pc. SAE/Metric Large Ratcheting Tap and Die Drive Tool Set

■■ Die adapter works on round and hex shaped dies ■■ 5 degree ratcheting arc with reversible lever eliminates hand over hand turning ■■ Patented Twist Lock Guide System reduces "back walk" of die guard ■■ Die adapter works with Pass-Thru® Ratchet and Socket System as well as Vortex™ socket accessories ■■ Autolocking feature allows for safe removal of tap adapter ■■ Spring-loaded cap allows for quick-release of large tap adapter ■■ Extension adapters provide access in tight confined areas

Cat. No.

UPC No.

82812

099575828126

Cat. No.

Description

Packaging

Product Weight

Shelf Pack Qty.

Case

18.25 lb

Cat. No.

Description

Cat. No.

Description

Cat. No.

Description

82800

Large Ratcheting Sliding "T" Wrench

Tap 3/8 - 16 NC plug

Tap 14 x 1.25 plug

Hex Die 5/8 - 11 NC plug

82801

Large Locking Tap Adapter

Tap 3/8 - 24 NF plug

Tap 14 x 2.00 plug

Hex Die 5/8 - 18 NF plug

82802D

Hex Die Adapter

Tap 7/16 - 14 NC plug

Tap 16 x 1.50 plug

Hex Die 3/4 - 10 NC plug

3881

Medium Ratcheting Sliding "T" Wrench

Tap 7/16 - 20 NF plug

Tap 16 x 2.00 plug

Hex Die 3/4 - 16 NF plug

3883

Medium Tap Adapter

Tap 1/2 - 13 NC plug

Tap 18 x 1.50 plug

Hex Die 3 x 0.50 taper

3882

Small Tap Adapter

Tap 1/2 - 20 NF plug

Tap 18 x 2.50 plug

Hex Die 3 x 0.60 taper

3884D

Medium Hex Die Adapter

Tap 9/16 - 12 NC plug

Hex Die 4 - 40 taper

Hex Die 4 x 0.70 taper

Male Extension Adapter - 3/8" Drive

Tap 9/16 - 18 NF plug

Hex Die 6 - 32 taper

Hex Die 4 x 0.75 taper

Female Extension Adapter - 3/8" Drive

Tap 5/8 - 11 NC plug

Hex Die 8 - 32 taper

Hex Die 5 x 0.80 taper

Sliding "T" for Adapters

Tap 5/8 - 18 NF plug

Hex Die 10 - 24 taper

Hex Die 5 x 0.90 taper

4mm Hex Key

Tap 3/4 - 10 NC plug

Hex Die 10 - 32 taper

Hex Die 6 x 1.00 taper

5 Screw Extractors

Tap 3/4 - 16 NF plug

Hex Die 12 - 24 taper

Hex Die 7 x 1.00 taper

Metric Thread Gauge

Tap 3 x 0.50 taper

Hex Die 1/8 - 27 NPT

Hex Die 8 x 1.25 plug

SAE Thread Gauge

Tap 3 x 0.60 taper

Hex Die 1/8 - 28 BSP

Hex Die 9 x 1.00 plug

Tap 4 - 40 taper

Tap 4 x 0.70 taper

Hex Die 1/4 - 18 NPT

Hex Die 9 x 1.25 plug

Tap 6 - 32 taper

Tap 4 x 0.75 taper

Hex Die 1/4 - 19 BSP

Hex Die 10 x 1.25 plug

Tap 8 - 32 taper

Tap 5 x 0.80 taper

Hex Die 1/4 - 20 NC taper

Hex Die 10 x 1.50 plug

Tap 10 - 24 taper

Tap 5 x 0.90 taper

Hex Die 1/4 - 28 NF taper

Hex Die 11 x 1.50 plug

Tap 10 - 32 taper

Tap 6 x 0.100 taper

Hex Die 5/16 - 18 NC taper -

Hex Die 12 x 1.50 plug

Tap 12 - 24 taper

Tap 7 x 1.00 taper

Hex Die 5/16 - 24 NF taper

Hex Die 12 x 1.75 plug

Tap 1/8 - 27 NTP

Tap 8 x 1.25 plug

Hex Die 3/8 - 16 NC plug

Hex Die 14 x 1.25 plug

Tap 1/8 - 28 BSP

Tap 9 x 1.00 plug

Hex Die 3/8 - 24 NF plug

Hex Die 14 x 2.00 plug

Tap 1/4 - 18 NPT

Tap 9 x 1.25 plug

Hex Die 7/16 - 14 NC plug

Hex Die 16 x 1.50 plug

Tap 1/4 - 19 BSP

Tap 10 x 1.25 plug

Hex Die 7/16 - 20 NF plug

Hex Die 16 x 2.00 plug

Tap 1/4 - 20 NC taper

Tap 10 x 1.50 plug

Hex Die 1/2 - 13 NC plug

Hex Die 18 x 1.50 plug

Tap 1/4 - 28 NF taper

Tap 11 x 1.50 plug

Hex Die 1/2 - 20 NF plug

Hex Die 18 x 2.50 plug

Tap 5/16 - 18 NC taper

Tap 12 x 1.50 plug

Hex Die 9/16 - 12 NC plug

Tap 5/16 - 24 NF plug

Tap 12 x 1.75 plug

Hex Die 9/16 - 18 NF plug

C U T T I N G

82803D 82804

983

R A T C H E T I N G

T A P S

A N D

D I E S

75 Pc. SAE/Metric Medium Ratcheting Tap and Die Drive Tool Set

C U T T I N G

984

Cat. No.

UPC No.

3887

082171388736

Packaging

Product Weight

Shelf Pack Qty.

Case

7.22 lb

Cat. No.

Description

Cat. No.

Description

Cat. No.

Description

Cat. No.

Description

3881

Medium Ratcheting Sliding "T" Wrench

Tap 1/4 - 28 NF taper

Tap 5 x 0.80 taper

Hex Die 6 - 32 taper

3882

Small Tap Adapter

Tap 5/16 - 18 NC taper

Tap 5 x 0.90 taper

Hex Die 8 - 32 taper

3883

Medium Tap Adapter

Tap 5/16 - 24 NF plug

Tap 6 x 0.100 taper

Hex Die 10 - 24 taper

3884D

Medium Hex Die Adapter

Tap 3/8 - 16 NC plug

Tap 7 x 1.00 taper

Hex Die 10 - 32 taper

Sliding "T" for Adapters

Tap 3/8 - 24 NF plug

Tap 8 x 1.25 plug

Hex Die 12 - 24 taper

SAE screw pitch gauge

Tap 7/16 - 14 NC plug

Tap 9 x 1.00 plug

Hex Die 1/4 - 20 NC taper

METRIC screw pitch gauge

Tap 7/16 - 20 NF plug

Tap 9 x 1.25 plug

Hex Die 1/4 - 28 NF taper

#5 screwdriver

Tap 1/2 - 13 NC plug

Tap 10 x 1.25 plug

Hex Die 5/16 - 18 NC taper

Tap 4 - 40 taper

Tap 1/2 - 20 NF plug

Tap 10 x 1.50 plug

Hex Die 5/16 - 24 NF taper

Tap 6 - 32 taper

Tap 9/16 - 12 NC plug

Tap 11 x 1.50 plug

Hex Die 3/8 - 16 NC plug

Tap 8 - 32 taper

Tap 9/16 - 18 NF plug

Tap 12 x 1.50 plug

Hex Die 3/8 - 24 NF plug

Tap 10 - 24 taper

Tap 5/8 - 11 NC plug

Tap 12 x 1.75 plug

Hex Die 7/16 - 14 NC plug

Tap 10 - 32 taper

Tap 5/8 - 18 NF plug

Tap 14 x 1.25 plug

Hex Die 7/16 - 20 NF plug

Tap 12 - 24 taper

Tap 3/4 - 10 NC plug

Tap 14 x 2.00 plug

Hex Die 1/2 - 13 NC plug

Tap 1/8 - 27 NTP

Tap 3/4 - 16 NF plug

Tap 16 x 1.50 plug

Hex Die 1/2 - 20 NF plug

Tap 1/8 - 28 BSP

Tap 3 x 0.50 taper

Tap 16 x 2.00 plug

Hex Die 9/16 - 12 NC plug

Tap 1/4 - 18 NPT

Tap 3 x 0.60 taper

Tap 18 x 1.50 plug

Hex Die 9/16 - 18 NF plug

Tap 1/4 - 19 BSP

Tap 4 x 0.70 taper

Tap 18 x 2.50 plug

Hex Die 5/8 - 11 NC plug

Tap 1/4 - 20 NC taper

Tap 4 x 0.75 taper

Hex Die 4 - 40 taper

Hex Die 5/8 - 18 NF plug

R A T C H E T I N G

T A P S

A N D

D I E S

40 Pc. SAE Medium Ratcheting Tap and Die Drive Tool Set

Cat. No.

UPC No.

3885

082171388514

Packaging

Product Weight

Shelf Pack Qty.

Case

4.55 lb

Description

Cat. No.

Description

Cat. No.

Description

Cat. No.

Description

3881

Medium Ratcheting Sliding "T" Wrench

Tap 10 - 32 taper

Tap 1/2 - 13 NC plug

Hex Die 5/16 - 18 NC

3882

Small Tap Adapter

Tap 12 - 24 taper

Tap 1/2 - 20 NF plug

Hex Die 5/16 - 24 NF

3883

Medium Tap Adapter

Tap 1/8 - 27 NPT

Hex Die 4 - 40 taper

Hex Die 3/8 - 16 NC

3884D

Medium Hex Die Adapter

Tap 1/4 - 20 NC

Hex Die 6 - 32 taper

Hex Die 3/8 - 24 NF

Sliding "T" for Adapters

Tap 1/4 - 28 NF taper

Hex Die 8 - 32 taper

Hex Die 7/16 -14 NC

Thread gauge

Tap 5/16 - 18 NC taper

Hex Die 10 - 24 taper

Hex Die 7/16 - 20 NF

#5 screwdriver

Tap 5/16 24 NF taper

Hex Die 10 - 32 taper

Hex Die 1/2 -13 NC

Tap 4 - 40 taper

Tap 3/8 - 16 NC plug

Hex Die 12 - 24 taper

Hex Die 1/2 - 20 NF

Tap 6 - 32 taper

Tap 3/8 - 24 NF plug

Hex Die 1/8 - 27 NPT

Tap 8 - 32 taper

Tap 7/16 -14 NC plug

Hex Die 1/4 - 20 NC

Tap 10 - 24 taper

Tap 7/16 - 20 NF plug

Hex Die 1/4 - 28 NF

Cat. No.

C U T T I N G

985

R A T C H E T I N G

T A P S

A N D

D I E S

40 Pc. Metric Medium Ratcheting Tap and Die Drive Tool Set

Cat. No.

UPC No.

Packaging

Product Weight

Shelf Pack Qty.

3886

082171388620

Case

4.47 lb

Cat. No.

Description

Cat. No.

Description

Cat. No.

Description

Cat. No.

Description

3881

Medium Ratcheting Sliding "T" Wrench

Tap 4 x 0.75 taper

Tap 11 x 1.50 plug

Hex Die 8 x 1.25

3882

Small Tap Adapter

Tap 5 x 0.80 taper

Tap 12 x 1.50 plug

Hex Die 9 x 1.00

3883

Medium Tap Adapter

Tap 5 x 0.90 taper

Tap 12 x 1.75 plug

Hex Die 9 x 1.25

3884D

Medium Hex Die Adapter

Tap 6 x 1.00 taper

Hex Die 3 x 0.60

Hex Die 10 x 1.25

#5 screwdriver

Tap 7 x 1.00 taper

Hex Die 4 x 0.70

Hex Die 10 x 1.50

Sliding "T" for Adapters

Tap 8 x 1.25 plug

Hex Die 4 x 0.75

Hex Die 11 x 1.50

Thread gauge

Tap 9 x 1.00 plug

Hex Die 5 x 0.80

Hex Die 12 x 1.50

Tap 3 x 0.50 taper

Tap 9 x 1.25 plug

Hex Die 5 x 0.90

Hex Die 12 x 1.75

Hex Die 1/8 - 28BSP

Tap 3 x 0.60 taper

Tap 10 x 1.25 plug

Hex Die 6 x 1.00

Tap 4 x 0.70 taper

Tap 10 x 1.50 plug

Hex Die 7 x 1.00

C U T T I N G

5 Pc. Medium Ratcheting Tap and Die Drive Tool Set

986

Cat. No.

UPC No.

Packaging

Product Weight

Shelf Pack Qty.

3880

082171388040

Case

2.65 lb

Cat. No.

Description

Cat. No.

Description

3881

Medium Ratcheting Sliding "T" Wrench

3884D

Medium Hex Die Adapter

3882

Small Tap Adapter

Sliding "T" for Adapters

3883

Medium Tap Adapter

R A T C H E T I N G

T A P S

A N D

D I E S

Ratcheting "T" Wrench

■■ 5 degree ratcheting arc with reversible lever eliminates hand over hand turning ■■ Patented Twist Lock Guide System reduces "Back Walk" of die guard ■■ 3881: Works with 3882 and 3883 Tap Adapters & 3884 Die Adapter ■■ 82800: Works with 82801 Tap Adapter & 82802 Die Adapter Cat. No.

UPC No.

Packaging

Size

Product Weight

Shelf Pack Qty.

3881 82800

082171388156

Carded

Medium

1.00 lb

099575828003

Carded

Large

1.55 lb

Tap Adapters

■■ Designed for use with the GearRatchet™ System ■■ 3882 Tap Adapter Fits Tap Shanks with Size Ranges from 0.110" to 0.191" ■■ 3883 Tap Adapter Fits Tap Shanks with Size Ranges from 0.219" to 0.280"

Cat. No.

UPC No.

Packaging

Product Weight

Shelf Pack Qty.

3882

082171388248

Carded

0.50 lb

3883

082171388361

Carded

0.50 lb

Large Locking Tap Adapter

Cat. No.

UPC No.

82801

099575828010

■■ Auto locking feature allows for safe removal of tap adapter ■■ Spring loaded cap allows for quick-release of large tap adapter ■■ Accommodates taps up to 9/16"-3/4" and 14mm-18mm

Packaging

Product Weight

Shelf Pack Qty.

Carded

1.17 lb

C U T T I N G

Hex Die Adapter

■■ Die adapter works with Pass-Thru® Ratchet and Socket System as well as Vortex™ socket accessories ■■ Works on round and hex shaped dies ■■ 3884D fits 1" Diameter Hex Stock and will Work with Round Stock as Well ■■ 82802 Fits Up to 1-7/16" Diameter Hex Stock and Hex Dies Sizes 9/16" to 3/4" Cat. No.

UPC No.

Packaging

Product Weight

Shelf Pack Qty.

3884D

082171388446

Carded

0.50 lb

82802D

099575828027

Carded

0.61 lb

987

R A T C H E T I N G

T A P S

A N D

D I E S

Extension Adapters

Cat. No.

UPC No.

Description

Product Weight

82803D

099575828034

Male Extension Adapter - 3/8" Drive

0.11 lb

82804

099575828041

Female Extension Adapter - 3/8" Drive

0.57 lb

External Thread Restorer Files

■■ Restore External Threads by Filing ■■ Overlap Several Good Threads with File then File Damaged Threads ■■ Files Both Right and Left-Hand Threads ■■ Features Long-Lasting, Fast-Cutting Teeth Cat. No.

UPC No.

Packaging

Description

Product Weight

2228D

082171022289

Carded

Metric External Thread Restorer File, Pitch (0.75, 1.00, 1.25, 1.50, 1.75, 2.00, 2.50, 3.00mm)

0.35 lb

2229D

082171022296

Carded

SAE External Thread Restorer File, Pitch (11, 12, 13, 14, 16, 18, 20, 24)

0.35 lb

2249D

082171022494

Carded

SAE External Thread Restorer File, Pitch (9, 10, 12, 16, 20, 27, 28, 32)

0.36 lb

C U T T I N G

6 Pc. 3/8" Drive Impact Driver Set

988

■■ Free Frozen Bolts and Screws by Twisting the Tool in the Direction of the Rotation and Holding while Striking with a Hammer ■■ Reverse Action to Tighten Bolts ■■ Set is Standard 3/8" Square Drive and includes a 3/8" Square Drive Adapter for 5/16" Hex Bits ■■ Four-bit Set includes No. 2 and No. 3 Phillips Bits and 5/16" and 9/32" Slotted Bits Cat. No.

UPC No.

1140D

082171011405

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

6 Pc. 3/8" Drive Impact Driver Set

1.53 lb

412402

082171412424

Bagged

No. 2 Phillips Insert Bit 5/16" Dr.

0.05 lb

412403

082171412400

Bagged

Replacement No. 3 Phillips Insert Bit 5/16" Dr.

0.01 lb

412406

082171412462

Bagged

Replacement 6-8 Slotted Insert Bit 5/16" Dr.

0.01 lb

412410

082171412417

Bagged

Replacement 8-10 Slotted Insert Bit 5/16" Dr.

0.01 lb

S C R E W

E X T R A C T O R S

5 Pc. Screw Extractor Set

■■ Removes Broken Studs, Set Screws, Pipe and Alemite Fittings ■■ Drill a Hole in the Screw and Place Extractor into Hole ■■ Tap Lightly with a Hammer and Turn Counterclockwise with a Tap Wrench to Remove the Screw ■■ Features Undercut Flutes for More Positive Grip

Cat. No.

UPC No.

720DD

082171007200

Cat. No.

Description

Packaging

Product Weight

Carded

0.30 lb Cat. No.

Description

1109D

Screw Extractor (Sizes 1/4", 5/16")

1112D

Screw Extractor (Sizes 1/2", 9/16")

1110D

Screw Extractor (Size 3/8")

1113DD

Screw Extractor (Size 5/8")

1111D

Screw Extractor (Size 7/16")

Screw Extractors

For Use on Screw Sizes

For Use on Pipe Sizes

Use Drill Size

Minimum Depth of Drilled Hole

Product Weight

Shelf Pack Qty.

082171011092

Bagged

1/4 in; 5/16 in

1/8 in

3/8 in

0.05 lb

1110D

082171011108

Bagged

3/8 in

3/16 in

1/2 in

0.05 lb

1111D

082171011115

Bagged

7/16 in

1/8 in

15/64 in

1/2 in

0.10 lb

Cat. No.

UPC No.

1109D

082171011122

Bagged

1/2 in; 9/16 in

1/4 in

5/16 in

1/2 in

0.17 lb

082171011139

Bagged

5/8 in

3/8 in

5/8 in

0.20 lb

1112D 1113DD

4 Pc. Spiral Screw Extractor Set

Cat. No.

2419D

UPC No.

082171024191

C U T T I N G

■■ Removes Screws, Broken Studs, Set Screws, Pipe and Alemite Fittings ■■ Drill a Hole in the Screw and Place Extractor Into Hole ■■ Tap Lightly With Hammer and Turn Counterclockwise With Tap Wrench to Remove the Screw ■■ Spiral Blades Grip Screw

Packaging

For Use on Screw Sizes

Use Drill Size

Product Weight

Shelf Pack Qty.

Carded

No. 12 to 5/16"; 5/16" to 7/16"; 7/16" to 9/16"; 9/16" to 3/4";

7/64 in 5/32 in 1/4 in 17/64 in

0.25 lb

989

S C R E W

E X T R A C T O R S

Universal Nut Cracker

C U T T I N G

■■ Splits Most Stubborn Nuts 7/16" (11mm) Through 3/4" (19mm) Across the Flats ■■ Works in Channels Not Accessible to Other Tools ■■ Parallel Action of Pusher Cracks Nuts Without Damaging Bolt Threads ■■ Chisel Rotates 360° to Line Up Parallel to Bolt ■■ Simply Tighten the Screw Until the Nut Splits Has Rugged Drop-Forged Frame ■■ Do Not Use on Heat-Treated Nuts ■■ Length: 6-3/4" ■■ This is a Serviceable Product

990

Cat. No.

UPC No.

Packaging

Description

715D 71575D

Product Weight

082171007156

Carded

Universal Nut Cracker

1.50 lb

082171715754

Bagged

Replacement Plunger

0.05 lb

71574

082171715747

Bagged

Replacement Chisel

0.25 lb

71573D

082171715730

Bagged

Replacement Ball Bearings

0.01 lb

S C R E W

E X T R A C T O R S

5 Pc. Screw Extractor Set ■■ Made in the USA - Quality and Availability ■■ The Style Preferred By Professionals Since Straight, Tapering Flutes Grip More Securely Than Spiral Styles ■■ Will Not Cause the Screw or Pipe Being Removed to Expand and Bind ■■ Can Be Used for Either Right or Left Handed Screws, Bolts, Studs, or Pipe Threads ■■ Drill A Hole in the Broken Screw, Bolt or Stud; Lightly Tap the Extractor with A Hammer; and Turn it with A Wrench. ■■ Meets or Exceeds US Federal Spec. GGG-E-936B Cat. No.

UPC No.

Packaging

For Use on Screw Sizes

For Use on Pipe Sizes

Product Weight

Shelf Pack Qty.

70-970

781412709704

Boxed

#12 to 5/8 in

1/8 in to 3/8 in

8.72 lb

Cat. No.

Description

Cat. No.

Description

29-418

Vinyl Roll 5 Pockets

70-954

Screw Extractor 15/64"

70-950

Screw Extractor 1/8"

70-956

Screw Extractor 5/16"

70-952

Screw Extractor 3/16"

70-958

Screw Extractor 3/8"

Screw Extractors

■■ Made in the USA - Quality and Availability ■■ The Style Preferred By Professionals Since Straight, Tapering Flutes Grip More Securely Than Spiral Styles ■■ Will Not Cause the Screw or Pipe Being Removed to Expand and Bind ■■ Can Be Used for Either Right or Left Handed Screws, Bolts, Studs, or Pipe Threads ■■ Drill A Hole in the Broken Screw, Bolt or Stud; Lightly Tap the Extractor with A Hammer; and Turn it with a Wrench. ■■ Meets or Exceeds US Federal Spec. GGG-E-936B

Packaging

For Use on Screw Sizes

For Use on Pipe Sizes

Shank Size

0.188 in

Tip Size

Use Drill Size

Minimum Depth of Drilled Hole

Product Weight

Shelf Pack Qty.

0.125 in

0.375 in

0.03 lb

UPC No.

70-950

781412709506

Bagged

#12 to 5/16 in

70-952

781412709520

Bagged

5/16 in to 3/8 in

0.188 in

0.172 in

0.188 in

0.500 in

0.03 lb

70-954

781412709544

Bagged

7/16 in to 1/2 in

1/8 in

0.250 in

0.203 in

0.234 in

0.500 in

0.04 lb

70-956

781412709568

Bagged

1/2 in to 9/16 in

1/4 in

0.313 in

0.297 in

0.313 in

0.500 in

0.07 lb

70-958

781412709582

Bagged

9/16 in to 5/8 in

3/8 in

0.375 in

0.344 in

0.375 in

0.625 in

0.11 lb

70-960

781412709605

Bagged

5/8 in to 3/4 in

0.438 in

0.422 in

0.469 in

0.688 in

0.21 lb

70-962

781412709629

Bagged

3/4 in to 1 in

1/2 in

0.500 in

0.563 in

0.688 in

0.28 lb

70-964

781412709643

Bagged

1 in to 1-1/8 in

1/2 in

0.625 in

0.594 in

0.656 in

0.750 in

0.46 lb

70-966

781412709667

Bagged

1-1/8 in to 1-3/8 in

3/4 in

0.750 in

0.719 in

0.813 in

0.750 in

0.73 lb

C U T T I N G

Cat. No.

991

H A C K S A W

F R A M E S

4-in-1 Pro Series Hacksaw Frame

■■ Standard 90 degree for general use ■■ 45 degree angle for flush cuts ■■ Low profile position for tight spaces ■■ Jab saw configuration for a variety of inside cuts ■■ High tension for tightening the blade up to 30,000 psi ■■ Cushion grip handle for better control and comfort ■■ Magnetic blade storage inside frame Cat. No.

UPC No.

80975

037103809759

Packaging

Type of Frame

Blade Length

Product Weight

Shelf Pack Qty.

Carded

4-In-1 Pro Series Hacksaw Frame

12 in

2.50 lb

Cushion Grip Hacksaw Frame

■■ Rugged, lightweight frame built for professional tool users ■■ High tension reading, increased blade beam strength ■■ Uses high tensile strength Nicholson ® Bi-Metaloy ® hand hacksaw blades ■■ Screw-operated lever for tensioning the blade up to 30,000 PSI ■■ Blade can be positioned for 45° or 90° cutting ■■ Spare blades can be stored inside frame ■■ End of frame can be used as a jab saw Cat. No.

UPC No.

80965

037103809650

Packaging

Type of Frame

Blade Length

Product Weight

Shelf Pack Qty.

Carded

Cushion Grip High Tension

12 in

2.40 lb

High Tension Hacksaw Frame

C U T T I N G

■■ Quick changing blades ■■ Adjustable crank handle for tension up to 30,000 PSI torque ■■ Spare blades can be stored inside frame ■■ Blade can be positioned for 45° or 90° cutting ■■ End of frame can be used as a jab saw

992

Cat. No.

UPC No.

80956

037103809568

Packaging

Type of Frame

Blade Length

Product Weight

Shelf Pack Qty.

Carded

High Tension Adjustable

12 in

1.80 lb

Heavy Duty Hacksaw Frame- Nicholson

■■ High impact, contoured handle ■■ Adjust from 10" to 12" ■■ 45° blade adjustment

Cat. No.

UPC No.

80952

037103809520

Packaging

Type of Frame

Blade Length

Product Weight

Shelf Pack Qty.

Carded

Adjustable

10 in, 12 in

1.80 lb

H A C K S A W

F R A M E S

General Purpose Hacksaw Frame

■■ Instantly adjustable for 10"/250mm to 12"/300mm blades ■■ Adjusts 90° for vertical or horizontal cuts

Cat. No.

UPC No.

80951

037103809513

Packaging

Type of Frame

Blade Length

Product Weight

Shelf Pack Qty.

Carded

Adjustable

10 in, 12 in

1.10 lb

Economy Hacksaw Frame

■■ Adjustable from 10"/250mm to 12"/300mm ■■ Cuts to 2.75"/70mm in depth ■■ For DIY and home use

Cat. No.

UPC No.

80950

037103809506

Packaging

Type of Frame

Blade Length

Product Weight

Shelf Pack Qty.

Carded

Adjustable

10 in, 12 in

0.70 lb

Little-Nic® Utility Hacksaw

Cat. No.

UPC No.

80968

037103809681

■■ For professionals and homeowners ■■ Gets into small places, makes difficult cutting jobs easy ■■ Overall length 10 ■■ Uses any standard size hacksaw blade ■■ Comes complete with high quality Nicholson ® SS1024 hacksaw blade ■■ Blister packed on attractive cards with suggested uses on back Packaging

Blade Length

Product Weight

Shelf Pack Qty.

Carded

10 in

0.30 lb

Packaging

Blade Length

Product Weight

Shelf Pack Qty.

Carded

6.5 in

0.62 lb

C U T T I N G

Jab Saw with Sheath

■■ Aggressive tooth design ■■ Cuts on the push and pull stroke ■■ Sharpened tip makes cutting drywall easier ■■ Non-slip, comfort grip handle ■■ Includes ballistic nylon sheath for safe storage ■■ Great for projects such as drywall, cement board, wood or plastic

Cat. No.

UPC No.

NS500

037103212269

993

J A B

S A W S

Jab Saw

■■ Special saw always needed for the difficult jobs ■■ Designed for those hard-to-reach areas ■■ Jab saw will work with any standard size hacksaw blade ■■ Can replace worn blade easily ■■ Untighten adjusting saw, remove worn blade and replace ■■ Replace with a new Nicholson® blade, re-tighten the adjusting screw Cat. No.

UPC No.

80969

037103809698

Packaging

Blade Length

Product Weight

Shelf Pack Qty.

Carded

10 in

0.30 lb

Bi-Metaloy Hand Hacksaw Blades

C U T T I N G

■■ Molybdenum alloy tool steel edge ■■ Tough flexible high carbon steel backing ■■ Lasts twice as long as high-speed steel ■■ Lasts up to ten times longer than carbon steel ■■ Operates 20% to 50% faster ■■ High tooth hardness and shock resistance ■■ 2 Blades per card - 10 cards per bag - 40 bags per carton

994

Cat. No.

UPC No.

Packaging

Set Type

Length

TPI/PPI

Width

Gauge

Product Weight

Shelf Pack Qty.

62635 62659

037103626356

Boxed

Wavy

037103626592

Boxed

Wavy

10 in

0.50 in

0.025 in

0.04 lb

100

10 in

0.50 in

0.025 in

0.04 lb

100

62706

037103627063

Boxed

62723

037103627230

Boxed

Raker

12 in

0.50 in

0.025 in

0.04 lb

100

Wavy

12 in

0.50 in

0.025 in

0.04 lb

62749

037103627490

100

Boxed

Wavy

12 in

0.50 in

0.025 in

0.02 lb

100

62776 62811

037103627766

Boxed

Wavy

12 in

0.50 in

0.025 in

0.04 lb

100

037103628114

Carded

Wavy

10 in

0.50 in

0.025 in

0.08 lb

62826

037103628268

Carded

Wavy

12 in

0.50 in

0.025 in

0.11 lb

62830

037103628305

Carded

Wavy

10 in

0.50 in

0.025 in

0.10 lb

62832

037103628329

Carded

Wavy

12 in

0.50 in

0.025 in

0.10 lb

62835L

037103188069

Carded

Wavy

12 in

0.50 in

0.025 in

0.45 lb

62836L

037103188076

Carded

Wavy

12 in

0.50 in

0.025 in

0.43 lb

62838

037103628381

Carded

Wavy

12 in

18/24/32

0.50 in

0.025 in

0.30 lb

62839

037103628398

Carded

Wavy

12 in

0.50 in

0.025 in

0.11 lb

H A C K S A W

B L A D E S

Solid Flexible Carbon Steel Hacksaw Blades

■■ Solid high carbon steel ■■ Tempered to provide hard edge with flexible back ■■ Specially hardened to induce toughness ■■ Economy blade for sawing light to medium-hard materials ■■ A good balance of wear resistance, mechanical shock absorbing properties ■■ Virtually unbreakable ■■ 2 blades per card - 10 cards per bag - 40 bags per carton Cat. No.

UPC No.

Packaging

Set Type

Length

TPI/PPI

Width

Gauge

Product Weight

Shelf Pack Qty.

63103

037103631039

Boxed

Wavy

10 in

0.50 in

0.025 in

0.04 lb

100

63112

037103631121

Boxed

Wavy

10 in

0.50 in

0.025 in

0.04 lb

100

63145

037103631459

Boxed

Wavy

12 in

0.50 in

0.025 in

0.04 lb

100

63158

037103631589

Boxed

Wavy

12 in

0.50 in

0.025 in

0.04 lb

100

63220

037103632203

Carded

Wavy

10 in

0.50 in

0.025 in

0.08 lb

63256

037103632562

Carded

Wavy

12 in

0.50 in

0.025 in

0.09 lb

63268

037103632685

Carded

Wavy

12 in

0.50 in

0.025 in

0.05 lb

63280

037103632807

Carded

Wavy

12 in

0.50 in

0.025 in

0.10 lb

Predator Handsaws

■■ Ergonomic handle with rubber-coated grip for comfort and control ■■ Razor sharp diamond ground teeth for easier cuts ■■ Induction hardened Hard Point (H.P.) teeth never need resharpening ■■ Handle features 45/90 degree shape for marking angles UPC No.

Packaging

Length

Points Per Inch

Tooth Type

Product Weight

NSP1

037103172358

Carded

24 in

Standard Hard Point

1.17 lb

Shelf Pack Qty.

NSP2

037103172365

Carded

24 in

Standard Hard Point

1.17 lb

NSP5

037103172396

Carded

15 in

Aggressive Hard Point

0.82 lb

Product Weight

Shelf Pack Qty.

Cat. No.

Professional Handsaws

Cat. No.

UPC No.

Packaging

Length

Points Per Inch

Tooth Type

NS1501

037103172310

Carded

24 in

Standard

1.25 lb

NS1502

037103172327

Carded

24 in

Standard

1.25 lb

NS1503

037103172334

Carded

20 in

Standard

1.00 lb

NS1504

037103172341

Carded

15 in

Standard

1.00 lb

C U T T I N G

■■ Precision set teeth for smooth cuts ■■ Hardened and tempered polished steel blade ■■ Resharpenable teeth for long life

995

H A N D

S A W S

Quik-Cut Economy Handsaw

■■ Precision set teeth for smooth cuts ■■ Hardened and tempered polished steel blade ■■ Resharpenable teeth for long life ■■ Handle features 40/90 degree shape for long life Cat. No.

UPC No.

NS503N

037103227126

Packaging

Length

Points Per Inch

Tooth Type

Product Weight

Shelf Pack Qty.

Carded

15 in

Standard

0.95 lb

4-1/4" Coping Saw

■■ Popular with carpenters and home craftsman ■■ Throat opening permits cuts up to 4-1/4" ■■ Spring steel, rounded edge frame with polished finish ■■ Adjustable angle blade ■■ Straight type wood handle

Cat. No.

UPC No.

80170

037103801708

Packaging

Length

Points Per Inch

Blade Length

Blade Width

Product Weight

Shelf Pack Qty.

Carded

12-1/2 in

6-1/2 in, 165 mm

1/8 in, 3.17 mm

0.50 lb

6-1/2" Coping Saw

■■ Used for cutting sharp angles and curves ■■ Throat opening permits cuts up to 6-1/2"/165mm ■■ Spring steel, rounded edge frame with polished finish ■■ Adjustable angle blade ■■ Straight type wood handle

Cat. No.

UPC No.

80176

037103801760

Packaging

Length

Points Per Inch

Blade Length

Blade Width

Product Weight

Shelf Pack Qty.

Carded

12-3/4 in

6-1/2 in, 165 mm

1/8 in, 3.17 mm

0.50 lb

C U T T I N G

Coping Saw Blades

996

■■ 6-1/2"/165mm long ■■ 15 points, pin end ■■ Fits Nicholson® model No. 80170 and 80176 frames ■■ Blister packed ■■ 5 blades per card

Cat. No.

UPC No.

80182N

037103801821

Packaging

Length

Points Per Inch

Blade Width

Product Weight

Shelf Pack Qty.

Carded

6-1/2 in

1/8 in, 3.17 mm

0.03 lb

H A N D

S A W S

Predator® Compass/Keyhole Saw

■■ Ergonomic handle with rubber-coated grip for comfort and control ■■ Razor sharp diamond ground teeth for easier cuts ■■ Induction hardened Hard Point (H.P.) teeth never need resharpening ■■ Blade tapered to a point for starting holes and cutting curves Cat. No.

UPC No.

NSP9

037103172426

Packaging

Length

Points Per Inch

Tooth Type

Product Weight

Shelf Pack Qty.

Carded

12 in

Hard Point

0.40 lb

BowHack® Combination Bowsaw and Hacksaw

■■ Flat ground ■■ For smooth cutting of paneling, plywood and laminates ■■ Made from finest alloy saw steel ■■ Stays sharper longer, resists rust ■■ Easily resharpened ■■ Cuts smoother with less friction

Cat. No.

UPC No.

Description

Packaging

Length

Product Weight

Shelf Pack Qty.

80777

037103807779

12” Bow Hack Combination, Hi-Viz Frame

Display

12 in

1.40 lb

80799

037103807991

12” Bow Hack Combination, Black Frame

Display

12 in

1.45 lb

80814

037103808141

12" Bow Saw Replacement Blade

Bulk with UPC

12 in

0.75 lb

Curved Pruner

■■ General-purpose pruner for fast cutting of small limbs ■■ A favorite in citrus groves and vineyards ■■ Silver Steel® constructed blade with polished finish ■■ Easy-to-grip knife-type wood handle trimmed with aluminum screws ■■ Full cardboard sleeve protects the blade Cat. No.

UPC No.

80263

037103802637

Packaging

Length

Reverse Rip Points Per Inch

Product Weight

Shelf Pack Qty.

Carded

14 in

0.50 lb

C U T T I N G

Double Edge Pruner

■■ Lightweight, economy pruner ■■ Dual-purpose pruner ■■ Special steel constructed blade ■■ Fine teeth on one edge for light trimming ■■ Teeth on opposite edge for heavier limbs ■■ Wood handle ■■ Plastic sleeve for blade protection Cat. No.

UPC No.

80269

037103802699

Packaging

Length

Points Per Inch

Product Weight

Shelf Pack Qty.

Carded

16 in

8 (fine edge)

0.80 lb

997

H A N D

S A W S

Silver Flash Pruner

■■ Heavy-duty ■■ Preferred by utility crews and tree surgeons ■■ Silver Steel® constructed blade, flat ground ■■ Concave cutting edge has precision set and bevel filed teeth ■■ Teeth cut fast on the pull stroke ■■ Extra large teeth and gullets for speed cutting large limbs ■■ Wood handle ■■ Full cardboard sleeve protects blade Cat. No.

UPC No.

80299

037103802996

Packaging

Length

Product Weight

Shelf Pack Qty.

Carded

26 in

1.50 lb

Packaging

Length

Product Weight

Shelf Pack Qty.

Carded

24 in

1.80 lb

Tuttle Tooth Pruner

C U T T I N G

■■ All-purpose saw for general pruning ■■ Special steel constructed blade ■■ Teeth designed for fast cutting of large limbs and firewood ■■ Wood handle ■■ Full cardboard sleeve protects blade

998

Cat. No.

UPC No.

80309

037103803092

File Sets and Assortments................. 1002 American Pattern Files...................... 1007 American Pattern Rasps.................... 1021 X.F. Files â&#x20AC;&#x201C; Swiss Pattern................. 1024 Curved Tooth Files............................. 1030 File Accessories................................. 1032

Standard Bastard Files...................... 1035

11 F I L E S

999

F I L E S

Files In 1864, the Nicholson File Company became the first successful manufacturer of machine-made files. Today, NicholsonÂŽ is the most recognized brand of files in the world. Over the years, the Nicholson product line has increased in scope and size, and now includes files, rasps and handsaws, all manufactured to uncompromising standards of quality. Rear taper allows your hand to lock securely around handle for increased push force

ERGONOMIC FILES

Rubber coating and rounded shape eliminates pressure points Raised ribs, wide middle, and flared neck prevent slipping

Hang hole for easy storage

Nicholson files are manufactured to rigorous specifications and with the utmost attention to detail for uncompromised quality

Every Nicholson file is precision engineered to provide maximum gram removal per stroke and amazing longevity Nicholson ergonomic files are available in sets. This 9 piece set fits easily and securely into rugged compact pouch.

The following manuals and instruction leaflets are available. Please ask your local distributor or Apex Tool Group representative for copies.

The Nicholson File Operations facilities in Sorocaba, Brazil and Cali, Colombia conform to Quality Standards ISO 9001.

â&#x20AC;˘ The Guide to Files and Filing - #5530704

Files F I L E S

GearWrenchÂŽ offers a range of the most popular handled files that provide comfort, versatility and optimum material removal. GearWrench files are available in a limited range of standard sizes and miniature files. Dual material ergonomic handle provides optimal balance of strength, comfort and performance Each GearWrench file is engineered to provide maximum material removal per stroke with outstanding longevity

GearWrench files are available in flat, round, half round, triangle, square and knife designs

1000

GearWrench file sets provide all the files needed for many applications

F I L E S

File Terminology COURSENESS

AMERICAN PATTERN

Bastard Cut

Second Cut

SWISS PATTERN

Smooth Cut

• Work to be accomplished, whether roughing or finishing, will determine type of teeth and coarseness for each application • Most American pattern files are available with 3 grades of cut: bastard-cut, second-cut and smooth-cut • Swiss pattern files are available in seven cuts: No. 00, 0,1, 2, 3, 4, and 6 • The degree of coarseness is greater in longer files, but differences between bastard, second and smooth are proportionate

LENGTH Tang

SHAPE Heel

Belly

Point

Length • Length is measured exclusive of tang, from point to heel,unless specified otherwise • Desired stroke length, type of material and size will determine length required

Kinds of Teeth

• Area to be filed will determine specific cross-section (round, square, flat, etc.) to be used

RASP-CUT

SINGLE-CUT

• Single set of parallel, diagonal rows of teeth • Single-cut files are often used with light pressure to produce a smooth surface finish or to put a keen edge on knives, shears or saws

MAGICUT®

• Series of individual teeth which are formed by a single-pointed tool • Produces a rough cut that is used primarily on wood, hooves, aluminum and lead

DOUBLE-CUT • Single cut teeth divided by angular serrations into shorter cutting edges, which free themselves readily from chips and perform roughing and smoothing at the same time • 2 sets of diagonal rows of teeth • Second set of teeth cut in opposite diagonal direction and on top of the first set • First set of teeth is known as the overcut, second is known as upcut • Upcut is finer than overcut • Double-cut file is used with heavier pressure than the single-cut and removes material faster from the workpiece

CURVED-CUT F I L E S

• Teeth arranged in curved contours across the file face • Curved-cut file is normally used in automotive body shops for smoothing body panels

Safety Information WARNING

Wear safety goggles to protect your eyes. Never use a file without a tight fitting handle. AVERTISSEMENT Porter des lunettes de protection. Ne jamais utiliser une lime sans poignée bien ajustée. ADVERTENCIA Use gafas de seguridad para proteger sus ojos. Nunca utilice una lima con el mango suelto.

WARNING

AVERTISSEMENT

ADVERTENCIA

Risk Of Eye Injury

Risque de dommages d'oeil

Riesgo de lesión del ojo

Wear ANSI Approved Eye Protection

Protection d'oeil approuvée de l'usage A.N.S.I.

Protección de ojo aprobada del desgaste ANSI

1001

F I L E

S E T S

A N D

A S S O R T M E N T S

9 Pc. Ergonomic File Set

■■ Rubber-Coated Ergonomic Handles for Better Comfort and Control

Cat. No.

UPC No.

Packaging

Product Weight

Shelf Pack Qty.

22030HNN

037103243881

Pouch

4.35 lb

Cat. No.

Description

Cat. No.

Description

21701HN

10" Mill Bastard Cut, Ergonomic Handle

21842HN

12" Mill Bastard Cut, Ergonomic Handle

21729HN

6" Slim Taper File, Ergonomic Handle

21868HN

10" Flat Bastard Cut, Ergonomic Handle

21745HN

8" Half Round Bastard Cut, Ergonomic Handle

6" xx Slim Taper File, Ergonomic Handle

21746HN

10" Half Round Bastard Cut, Ergonomic Handle

10" Round Bastard File, Ergonomic Handle

21748HN

8" Flat Bastard Cut, Ergonomic Handle

5 Pc. Ergonomic File Set

F I L E S

■■ Rubber-Coated Ergonomic Handles for Better Comfort and Control ■■ General Purpose Selection for Home and Professional Use ■■ Set of 5 Files Fits Easily and Securely Into Rugged, Compact Pouch

1002

Cat. No.

UPC No.

Packaging

Product Weight

Shelf Pack Qty.

22040HNN

037103243904

Pouch

2.20 lb

Cat. No.

Description

Cat. No.

Description

21694HN

8" Mill Bastard Cut, Ergonomic Handle

21746HN

10" Half Round Bastard Cut, Ergonomic Handle

21701HN

10" Mill Bastard Cut, Ergonomic Handle

21748HN

8" Flat Bastard Cut, Ergonomic Handle

21729HN

6" Slim Taper File, Ergonomic Handle

8" Ergonomic File Set

■■ Rubber-Coated Ergonomic Handles for Better Comfort and Control ■■ Basic Selection for Home and Professional Use

Cat. No.

UPC No.

Packaging

Product Weight

Shelf Pack Qty.

22018HN

037103244901

Pouch

1.05 lb

Cat. No.

Description

Cat. No.

Description

21694HN

8" Mill Bastard Cut, Ergonomic Handle

8" Round Bastard Cut, Ergonomic Handle

21745HN

8" Half Round Bastard Cut, Ergonomic Handle

F I L E

S E T S

A N D

A S S O R T M E N T S

3 Pc. 6" Ergonomic File Set

■■ Rubber-Coated Ergonomic Handles for Better Comfort and Control ■■ Basic Selection for Home and Professional Use

Cat. No.

UPC No.

22015HNN

037103243829

Packaging

Product Weight

Shelf Pack Qty.

Pouch

0.70 lb

Cat. No.

Description

Cat. No.

Description

04798HN

6" Half Round Bastard Cut, Ergonomic Handle

6" Round Bastard Cut, Ergonomic Handle

21687HN

6" Mill Bastard Cut, Ergonomic Handle

9 Pc. Maintenance File Set

■■ For Home and Professional Use

Cat. No.

UPC No.

22030NN

037103243898

Cat. No.

Description

Packaging

Product Weight

Shelf Pack Qty.

Pouch

3.45 lb

Cat. No.

Description

8" Flat Smooth Cut

08642N

10" Mill Bastard Cut

10" Flat Bastard Cut

12019

10" Round Bastard Cut

03731N

10" Flat Smooth Cut

14224M

6" Slim Taper File

04896N

8" Half Round Bastard Cut

18924N

8" 4-in-Hand® Rasp and File

04995N

10" Half Round Bastard Cut

03632N 03665N

8 Pc. Machinist File Set

■■ Includes a File Cleaner Card ■■ Features a Rugged, Compact Pouch

F I L E S

Cat. No.

UPC No.

22025NN

037103243874

Packaging

Product Weight

Shelf Pack Qty.

Pouch

3.35 lb

Cat. No.

Description

Cat. No.

Description

03665N

10" Flat Bastard Cut

12019

10" Round Bastard Cut

03731N

10" Flat Smooth Cut

13196

10" Square Bastard Cut

04995N

10" Half Round Bastard Cut

14255M

7" Slim Taper File

08642N

10" Mill Bastard Cut

21458

10" File and Rasp Cleaner

1003

F I L E

S E T S

A N D

A S S O R T M E N T S

7 Pc. Machinist File Set

■■ General Purpose File Kit for Machine Shop

Cat. No.

UPC No.

22024NN

037103243867

Cat. No.

Description

Packaging

Product Weight

Shelf Pack Qty.

Pouch

2.50 lb

Cat. No.

Description

03665N

10" Flat Bastard Cut

12019

10" Round Bastard Cut

03731N

10" Flat Smooth Cut

13196

10" Square Bastard Cut

04995N

10" Half Round Bastard Cut

14255M

7" Slim Taper File

08642N

10" Mill Bastard Cut

6 Pc. 4"/100mm American Pattern File Assortment

■■ 4" Warding, Half-Round, Round, Hand, Square and Slim Taper Files ■■ All Files Come with Handles ■■ Kit Comes in Bastard-Cut Only ■■ Six of the Most Popular 4" Files Packaged in An Attractive Plastic Pouch

Cat. No.

UPC No.

22062NN

037103243928

Packaging

Product Weight

Shelf Pack Qty.

Pouch

0.40 lb

Packaging

Product Weight

Shelf Pack Qty.

Pouch

1.80 lb

F I L E S

5 Pc. General Purpose Set

1004

■■ General Purpose File Kit for Home and Professional Use ■■ Set of 5 Files Fits Easily and Securely Into Rugged, Compact Pouch

Cat. No.

UPC No.

22040NN

037103243911

Cat. No.

Description

Cat. No.

Description

04995N

10" Half Round Bastard Cut

08642N

10" Mill Bastard Cut

08497N

8" Mill Bastard Cut

14224M

6" Slim Taper File

08560N

8" Mill Smooth Cut

F I L E

S E T S

A N D

A S S O R T M E N T S

4 Pc. Thread Restoring File Set

■■ Used to Restore Damaged or Worn External Threads on Bolts, Pipes, Etc. ■■ Each Thread Restoring File Will Work with 8 Different Thread Sizes ■■ Convenient 4-Piece Set ■■ Color Caps on Tubes ■■ Type 1 Black Cap: Regular Bolt; 11, 12, 13, 14, 16, 18, 20, 24 Tpi ■■ Type 2 Red Cap: Ex. Fine/Ex. Coarse Bolt; 9, 10, 12, 16, 20, 27, 28, 32 Tpi ■■ Type 7 Green Cap: Regular Pipe; 8, 10, 11 1/2, 14, 16, 18, 24, 27 Tpi ■■ Type 8 Blue Cap: Metric Bolt; .80, 1.00, 1.25, 1.50, 1.75, 2.00, 2.50, 3.00 mm Cat. No.

UPC No.

33024

037103330246

Packaging

Product Weight

Shelf Pack Qty.

Pouch

1.60 lb

4 Pc. Handy Man's Home File Pack

■■ For Home and Professional Use

UPC No.

Packaging

Product Weight

Shelf Pack Qty.

22017NN

037103243843

Pouch

0.82 lb

Cat. No.

Description

Cat. No.

Description

08497N

8" Mill Bastard Cut

14224M

6" Slim Taper File

11716N

6" Round Bastard Cut

18924N

8" 4-in-Hand® Rasp and File

Cat. No.

3 Pc. File Pack

F I L E S

■■ For Home and Professional Use ■■ Pack Contains Files for Every Purpose ■■ 6"/150mm Slim Taper File ■■ 6"/150mm Round File ■■ 6"/150mm Mill Bastard File ■■ Plastic Pouch Lists Suggested Uses for Each File ■■ Pack Measures 3-1/2"/88mm X 9-1/2"/237mm with Hang Up Hole

Cat. No.

UPC No.

Packaging

Product Weight

Shelf Pack Qty.

22015NN

037103243836

Pouch

0.28 lb

Cat. No.

Description

Cat. No.

Description

08354N

6" Mill Bastard Cut

14224M

6" Slim Taper File

11716N

6" Round Bastard Cut

1005

F I L E

S E T S

A N D

A S S O R T M E N T S

6 Pc. Hobby File Set

■■ Selection of 6 Miniature Files with Fine Cut for Intricate Work ■■ 1 Each of Equaling, Half Round, Flat, Round, Three Square, Square Files ■■ Handy Vinyl Case Vacuum Packed on Hang Up Card ■■ Ideal for Handycrafts and Hobbies

Cat. No.

UPC No.

42030

037103420305

Packaging

Length

Product Weight

Shelf Pack Qty.

Pouch

5-1/2 in

0.10 lb

X.F.® Swiss Pattern Needle File Assortment Sets

■■ Made to More Exacting Measurements Than American Pattern Files ■■ Used Primarily By Jewelers, Die Makers, Watchmakers and Fine Toolmakers ■■ Knurled Handles ■■ Assortments of 12 File Shapes, Based on Length and Cut ■■ Assortments also Include Joint and Marking Files Cat. No.

UPC No.

Packaging

Length

File Cut

Product Weight

Shelf Pack Qty.

37029

037103370297

Pouch

4 in

0.10 lb

37392

037103373922

Pouch

5-1/2 in

0.20 lb

37755

037103377555

Pouch

6-1/4 in

0.25 lb

37035

037103370358

Pouch

4 in

0.13 lb

37398

037103373984

Pouch

5-1/2 in

0.20 lb

37761

037103377616

Pouch

6-1/4 in

0.25 lb

37404

037103374042

Pouch

5-1/2 in

0.20 lb

37767

037103377678

Pouch

6-1/4 in

0.25 lb

Thread Restoring Files

F I L E S

■■ Used to Restore Damaged or Worn External Threads on Bolts, Pipes, etc.

1006

Cat. No.

UPC No.

Packaging

File Cut

Style

Tooth Type

Product Weight

Shelf Pack Qty.

33007

037103330079

Bagged

Ex Fine/Ex Coarse Bolt

Thread Teeth

0.40 lb

33016

037103330161

Bagged

Metric Bolt

Thread Teeth

0.35 lb

33001

765957299173

Bagged

Regular Bolt

Thread Teeth

0.40 lb

A M E R I C A N

P A T T E R N

Aluminium Files - Type "A" Flat

■■ American Pattern Flat Aluminum Type ■■ Special Tooth Construction Eliminates Clogging When Filing Aluminum ■■ Flat Shape ■■ All Sizes Have Same Number of Teeth Per Inch ■■ Smooth Finish Obtained By Using Shearing Cut Toward Left

Cat. No.

UPC No.

Packaging

Length

File Cut

00001N 00024N

Product Weight

Shelf Pack Qty.

037103242525

Boxed

6 in

Double Cut

0.10 lb

037103242532

Boxed

8 in

Double Cut

0.25 lb

00047N

037103242549

Boxed

10 in

Double Cut

0.45 lb

00070N

037103242556

Boxed

12 in

Double Cut

0.80 lb

Chain Saw Files - Round

■■ American Pattern Round Chainsaw File ■■ Tighten Tension on Chain to Firmly Support Cutters When Filing ■■ File From Inside to Outside of Cutter ■■ Place File Against Beveled Cutting Surface of Teeth 20° to 45° with Saw ■■ Follow Saw Manufacturers' Specifications ■■ Sharpen All Left Hand Cutters on One Side of Chain ■■ Then Move to the Other Side and File All the Right Hand Cutters ■■ Check Depth Gauge Height Every 2 or 3 Sharpenings ■■ Height Between Cutting Teeth and Depth Gauge is Between 0.020" to 0.030" Packaging

Packaged

Length

Diameter

File Cut

Product Weight

Shelf Pack Qty.

714994015901

Carded

1/Card

6 in

1/8 in

Knurl Cut

0.08 lb

02144N

037103221735

Boxed

6 in

1/8 in

Knurl Cut

0.02 lb

01630

714994016304

Carded

1/Card

6 in

5/32 in

Knurl Cut

0.08 lb

01633

714994016335

Carded

2/Card

6 in

5/32 in

Knurl Cut

0.08 lb

02145N

037103221681

Boxed

6 in

5/32 in

Knurl Cut

0.03 lb

01974

037103019745

Carded

1/Card

8 in

1/4 in

Knurl Cut

0.14 lb

02147N

037103221698

Boxed

8 in

1/4 in

Knurl Cut

0.10 lb

23861

037103238610

Carded

1/Card

8 in

13/64 in

Knurl Cut

0.18 lb

01765

037103017659

Carded

1/Card

8 in

3/16 in

Knurl Cut

0.09 lb

01768

714994017684

Carded

2/Card

8 in

3/16 in

Knurl Cut

0.08 lb

02229B

037103232960

Bagged

8 in

3/16 in

Knurl Cut

0.19 lb

01891

037103018915

Carded

1/Card

8 in

5/32 in

Knurl Cut

0.09 lb

02228B

037103232953

Bagged

8 in

5/32 in

Knurl Cut

0.13 lb

01888

037103018885

Carded

1/Card

8 in

7/32 in

Knurl Cut

0.10 lb

01894

037103018946

Carded

2/Card

8 in

7/32 in

Knurl Cut

0.09 lb

02230B

037103232977

Bagged

8 in

7/32 in

Knurl Cut

0.24 lb

F I L E S

UPC No.

01590

Cat. No.

1007

A M E R I C A N

P A T T E R N

Chain Saw Files - Flat

■■ American Pattern Flat Chainsaw File ■■ Used for Cutter-Raker Type (2 Round Edges) Chain Saw ■■ Rectangular Shape Cat. No.

UPC No.

02215N

037103242563

Packaging

Length

File Cut

Product Weight

Shelf Pack Qty.

Boxed

8 in

Single

0.25 lb

Depth Gauge Chain Saw File

■■ American Pattern Depth Gauge Chainsaw File ■■ Rectangular Shape ■■ Single Cut, Safe Edges ■■ Length Shown is Overall Length of File ■■ Used for Filing and Maintaining Proper Depth Gauge Clearance Cat. No.

UPC No.

02244N

037103242570

Packaging

Length

File Cut

Product Weight

Shelf Pack Qty.

Boxed

8 in

Single

0.08 lb

Shelf Pack Qty.

Double Ender Files

■■ American Pattern Taper File, Regular ■■ Triangular Shape ■■ Tapers Slightly Towards the Point ■■ File Supplied with Handles ■■ Double-Ended 1/2 File ■■ Sides and Edges Are Single-Cut From Points to Center Giving Full Use of File

Cat. No.

UPC No.

Packaging

Length

File Cut

Product Weight

02884M

037103143914

Boxed

6 in

Single

0.05 lb

02905M

037103143969

Boxed

7 in

Single

0.05 lb

02926M

037103144003

Boxed

8 in

Single

0.07 lb

Shelf Pack Qty.

F I L E S

Farmer's Own File

1008

■■ American Pattern Farmer'S Own File ■■ General Purpose File Suited for Agricultural Use ■■ Rectangular Shape, Single Cut, Safe Edges ■■ Length Measured Exclusive of Handle ■■ Convenient Hang Up Hole Cat. No.

UPC No.

Packaging

Length

File Cut

Product Weight

06637N

037103242860

Carded

6 in

Single

0.30 lb

06649N

037103242877

Boxed

8 in

Single

0.45 lb

08922N

037103243218

Carded

8 in

Single

0.50 lb

06668N

037103242884

Boxed

10 in

Single

0.70 lb

A M E R I C A N

P A T T E R N

Flat Files

■■ American Pattern Flat File, Bastard Cut ■■ Used By Machinists, Machinery Builders, Ship and Engine Builders ■■ Also By Repairman and Others Who Require Rapid Removal of Metal ■■ Rectangular in Cross Section and Taper Slightly Towards Point in Width ■■ Double Cut on Sides, Single Cut on Edges Cat. No.

UPC No.

03367N

037103242600

Packaging

Length

Handled

File Cut

Product Weight

Shelf Pack Qty.

Boxed

4 in

Bastard

0.03 lb

03467N 21867N

037103242631

Boxed

6 in

Bastard

0.10 lb

037103243607

Carded

6 in

Bastard

0.15 lb

03566N 21748HN

037103242679

Boxed

8 in

Bastard

0.25 lb

037103243485

Carded

8 in

Ergonomic

Bastard

0.35 lb

037103243591

Carded

8 in

Bastard

0.20 lb

037103242716

Boxed

10 in

Bastard

0.45 lb

21868HN

037103243614

Carded

10 in

Ergonomic

Bastard

0.60 lb

21868N

037103243621

Carded

10 in

Bastard

0.48 lb

03764N

037103242761

Boxed

12 in

Bastard

0.80 lb

03762N

037103242754

Carded

12 in

Bastard

0.75 lb

03863N

037103242792

Boxed

14 in

Bastard

1.10 lb

03980N

037103242822

Boxed

16 in

Bastard

2.00 lb

03401N

037103242617

Boxed

4 in

Second

0.03 lb

03500N

037103242648

Boxed

6 in

Second

0.10 lb

03599N

037103242686

Boxed

8 in

Second

0.25 lb

03698N

037103242723

Boxed

10 in

Second

0.45 lb

03797N

037103242778

Boxed

12 in

Second

0.80 lb

03896N

037103242815

Boxed

14 in

Second

1.10 lb

03434N

037103242624

Boxed

4 in

Smooth

0.03 lb

03533N

037103242655

Boxed

6 in

Smooth

0.10 lb

03534N

037103242662

Carded

6 in

Smooth

0.15 lb

03632N

037103242693

Boxed

8 in

Smooth

0.25 lb

03633N

037103242709

Carded

8 in

Smooth

0.25 lb

03731N

037103242730

Boxed

10 in

Smooth

0.45 lb

03732N

037103242747

Carded

10 in

Smooth

0.60 lb

037103242785

Boxed

12 in

Smooth

0.80 lb

037103242808

Boxed

14 in

Smooth

1.10 lb

F I L E S

03830N 03929N

21862N 03665N

1009

A M E R I C A N

P A T T E R N

Half Round Files

F I L E S

■■ American Pattern Half Round File, Bastard Cut ■■ Used on Concave, Convex and Flat Surfaces ■■ Rounded on 1 Side, Flat on Opposite ■■ Rounded Sides of All Half-Round Bastard Files Are Double-Cut ■■ Flat Sides of All Half-Round Files Are Double Cut

1010

Cat. No.

UPC No.

Packaging

Length

Handled

File Cut

Product Weight

Shelf Pack Qty.

04695N 04795N

037103218513

Boxed

4 in

Bastard

0.06 lb

037103218520

Boxed

6 in

Bastard

0.13 lb

04798HN

037103218957

Carded

6 in

Ergonomic

Bastard

0.36 lb

21881N

037103219114

Carded

6 in

Bastard

0.15 lb

04896N

037103218551

Boxed

8 in

Bastard

0.27 lb

21745HN

037103219039

Carded

8 in

Ergonomic

Bastard

0.40 lb

21745N

037103219022

Carded

8 in

Yes

Bastard

0.40 lb

21857N

037103219077

Carded

8 in

Bastard

0.30 lb

04995N

037103218803

Boxed

10 in

Bastard

0.55 lb

21746HN

037103219046

Carded

10 in

Ergonomic

Bastard

0.69 lb

21858N

037103219091

Carded

10 in

Bastard

0.56 lb

05094N

037103218650

Boxed

12 in

Bastard

0.85 lb

05090N

037103219015

Carded

12 in

Bastard

0.90 lb

05190N

037103218940

Boxed

14 in

Bastard

1.50 lb

05194N

037103218926

Boxed

14 in

Bastard

1.25 lb

05307N

037103218018

Boxed

16 in

Bastard

1.99 lb

04729N

037103218407

Boxed

4 in

Second

0.06 lb

04828N

037103218438

Boxed

6 in

Second

0.10 lb

04927N

037103218568

Boxed

8 in

Second

0.25 lb

05026N

037103218612

Boxed

10 in

Second

0.49 lb

05125N

037103218841

Boxed

12 in

Second

0.90 lb

05225N

037103218933

Boxed

14 in

Second

1.27 lb

04762N

037103218414

Boxed

4 in

Smooth

0.06 lb

04861N

037103218445

Boxed

6 in

Smooth

0.10 lb

04960N

037103218728

Boxed

8 in

Smooth

0.25 lb

05059N

037103218827

Boxed

10 in

Smooth

0.53 lb

05158N

037103218889

Boxed

12 in

Smooth

0.95 lb

05258N

037103218711

Boxed

14 in

Smooth

1.28 lb

A M E R I C A N

P A T T E R N

Hand Files

■■ American Pattern Hand File, Bastard Cut ■■ Rectangular Shape ■■ Double Cut ■■ 1 Safe Edge ■■ Same Coarseness As Flat Files of Corresponding Lengths Cat. No.

UPC No.

Packaging

Length

File Cut

Product Weight

Shelf Pack Qty.

05652N 05738N

037103241443

Boxed

4 in

Bastard

0.05 lb

037103241467

Boxed

6 in

Bastard

0.15 lb

05853N

037103241498

Boxed

8 in

Bastard

0.30 lb

05968N

037103241528

Boxed

10 in

Bastard

0.50 lb

06084N

037103241559

Boxed

12 in

Bastard

0.95 lb

06198N

037103241580

Boxed

14 in

Bastard

1.44 lb

05675N

037103241450

Boxed

4 in

Second

0.05 lb

05771N

037103241474

Boxed

6 in

Second

0.15 lb

05886N

037103241504

Boxed

8 in

Second

0.30 lb

06001NN

037103241535

Boxed

10 in

Second

0.50 lb

06117N

037103241566

Boxed

12 in

Second

0.95 lb

05804N

037103241481

Boxed

6 in

Smooth

0.15 lb

05919N

037103241511

Boxed

8 in

Smooth

0.30 lb

06034N

037103241542

Boxed

10 in

Smooth

0.50 lb

06150N

037103241573

Boxed

12 in

Smooth

0.95 lb

Packaging

Length

File Cut

Product Weight

Shelf Pack Qty.

Handy File

■■ American Pattern Handy File ■■ One Side is Single Cut for Tool Sharpening and Smoothing Metal Surfaces ■■ Reverse Side is Double-Cut for General Filing and Rapid Stock Removal ■■ Rectangular Shape ■■ 1 Cut Edge, 1 Safe Edge ■■ Length Measured Exclusive of Handle UPC No.

06602N

037103242853

Boxed

8 in

Single/Double

0.60 lb

06601N

037103242846

Carded

8 in

Single/Double

0.37 lb

06686N

037103242891

Boxed

12 in

Single/Double

0.90 lb

Home and Garden File

F I L E S

Cat. No.

■■ American Pattern Home and Garden File ■■ Ideal Utility File for Home Owner ■■ For Sharpening Woodworking Tools (Chisels, Scrapers) ■■ Also for Garden Tools (Hoes, Shovels, Rotary Mower Blades) ■■ Rectangular Shape Cat. No.

UPC No.

11488N

037103243300

Packaging

Length

File Cut

Product Weight

Shelf Pack Qty.

Carded

10 in

Single

0.30 lb

1011

A M E R I C A N

P A T T E R N

Knife Files

■■ American Pattern Knife File, Bastard Cut ■■ Used Primarily By Tool and Die Makers with Work Having Acute Angles ■■ Triangular Shape ■■ Double-Cut on Sides, Single-Cut on Sharp Edge ■■ Knife Files Are Supplied with Safe Backs Cat. No.

UPC No.

Packaging

Length

File Cut

Product Weight

07090N

037103241764

Boxed

12 in

Back

0.70 lb

Shelf Pack Qty.

06711N

037103241634

Boxed

4 in

Bastard

0.03 lb

06804N

037103241665

Boxed

6 in

Bastard

0.10 lb

06898N

037103241696

Boxed

8 in

Bastard

0.15 lb

06992N

037103241726

Boxed

10 in

Bastard

0.35 lb

07085N

037103241757

Boxed

12 in

Bastard

0.70 lb

6 12

06742N

037103241641

Boxed

4 in

Second

0.03 lb

06836N

037103241672

Boxed

6 in

Second

0.10 lb

06930N

037103241702

Boxed

8 in

Second

0.15 lb

07023N

037103241733

Boxed

10 in

Second

0.35 lb

06773N

037103241658

Boxed

4 in

Smooth

0.03 lb

06867N

037103241689

Boxed

6 in

Smooth

0.10 lb

06961N

037103241719

Boxed

8 in

Smooth

0.15 lb

07054N

037103241740

Boxed

10 in

Smooth

0.35 lb

Shelf Pack Qty.

F I L E S

Long Angle Lathe Files - Bastard

1012

■■ American Pattern Flat Long Angle Lathe File, Bastard Cut ■■ Rapid, Free Cutting Files Designed for Lathe Filing ■■ Rectangular Shape ■■ Single Cut ■■ Safe Edges to Protect Shoulder or Dog ■■ Made on Flat File Blanks in Bastard-Cut ■■ Cut Faster Than Regular Mill Files and Leave Smoother Finish Cat. No.

UPC No.

Packaging

Length

File Cut

Product Weight

07657N

037103242938

Boxed

10 in

Bastard

0.45 lb

07688N

037103242945

Boxed

12 in

Bastard

0.80 lb

07719N

037103242952

Boxed

14 in

Bastard

1.10 lb

Length

File Cut

Product Weight

Shelf Pack Qty.

Long Angle Lathe Files - Fine

■■ American Pattern Hand Long Angle Lathe File, Fine Cut ■■ Specially Designed for Finishing Rapid Stock Removal on Lathe Work ■■ Rectangular Shape ■■ Safe Edges ■■ Cut Faster Than Regular Mill Files and Leave Smoother Finish Cat. No.

UPC No.

Packaging

07835N

037103241597

Boxed

8 in

Fine

0.30 lb

07842N

037103241603

Boxed

10 in

Fine

0.50 lb

07851N

037103241610

Boxed

12 in

Fine

0.93 lb

07863N

037103241627

Boxed

14 in

Fine

1.40 lb

A M E R I C A N

P A T T E R N

Magicut® Files - Flat

■■ American Pattern Flat Magicut® File ■■ Used By Machinists As All-Purpose File to Remove Stock Rapidly ■■ Leaves A Smooth Finish ■■ Rectangular Shape, Tapered Point in Width ■■ File Features A Pattern of Narrow Chip Breakers ■■ Created By Steep, Angled Serrations for Rapid Removal, Smoother Finish Cat. No.

UPC No.

Packaging

Length

Handled

File Cut

Product Weight

Shelf Pack Qty.

07894N

037103242969

Boxed

8 in

Magicut®

0.25 lb

07917N

037103242976

Boxed

10 in

Magicut®

0.45 lb

07941N

037103242983

Boxed

12 in

Magicut®

0.80 lb

07965N

037103242990

Boxed

14 in

Magicut®

1.10 lb

11 F I L E S

1013

A M E R I C A N

P A T T E R N

Mill Files

F I L E S

■■ American Pattern Mill File, Bastard Cut ■■ Used for Sharpening Mill or Circular Saws ■■ Also for Draw-Filing and Finishing Metals ■■ Rectangular Shape ■■ Single Cut on Sides and Edges ■■ 2 Square Edges ■■ All Sizes Taper Slightly in Width

1014

Cat. No.

UPC No.

08243N

037103243003

Packaging

Length

Handled

File Cut

Product Weight

Shelf Pack Qty.

Boxed

4 in

Bastard

0.03 lb

08354N 21687HN

037103243027

Boxed

6 in

Bastard

0.10 lb

037103243416

Carded

6 in

Ergonomic

Bastard

0.25 lb

21687N

037103243423

Carded

6 in

Yes

Bastard

0.25 lb

21825N

037103243508

Carded

6 in

Bastard

0.18 lb

08497N

037103243065

Boxed

8 in

Bastard

0.25 lb

21694HN

037103243447

Carded

8 in

Ergonomic

Bastard

0.35 lb

21694N

037103243454

Carded

8 in

Yes

Bastard

0.35 lb

21832N

037103243515

Carded

8 in

Bastard

0.25 lb

08642N

037103243119

Boxed

10 in

Bastard

0.45 lb

21701HN

037103243461

Carded

10 in

Ergonomic

Bastard

0.60 lb

21701N

037103243478

Carded

10 in

Yes

Bastard

0.60 lb

21839N

037103243546

Carded

10 in

Bastard

0.60 lb

08737N

037103243164

Boxed

12 in

Bastard

0.80 lb

21842HN

037103243553

Boxed

12 in

Ergonomic

Bastard

0.80 lb

21842N

037103243560

Carded

12 in

Bastard

0.72 lb

08832N

037103243195

Boxed

14 in

Bastard

1.10 lb

08925N

037103243225

Boxed

16 in

Bastard

2.00 lb

08385N

037103243041

Boxed

6 in

Second

0.10 lb

08529N

037103243089

Boxed

8 in

Second

0.25 lb

08673N

037103243133

Boxed

10 in

Second

0.45 lb

08768N

037103243171

Boxed

12 in

Second

0.80 lb

08306N

037103243010

Boxed

4 in

Smooth

0.03 lb

08416N

037103243058

Boxed

6 in

Smooth

0.10 lb

08560N

037103243102

Boxed

8 in

Smooth

0.25 lb

08559N

037103243096

Carded

8 in

Smooth

0.25 lb

08704N

037103243157

Boxed

10 in

Smooth

0.45 lb

08702N

037103243140

Carded

10 in

Smooth

0.60 lb

08799N

037103243188

Boxed

12 in

Smooth

0.80 lb

08894N

037103243201

Boxed

14 in

Smooth

1.10 lb

A M E R I C A N

P A T T E R N

Mill Files - 1 and 2 Round Edges

■■ Round Edges Are Used Where Rounding Gullets Are Preferred ■■ Compared to Sharp Corners or Squared Gullets ■■ Rectangular Shape ■■ Single Cut on Sides and Edges ■■ Bastard Cut ■■ Same As Regular Mill File Except It Has 1 Round Edge Cat. No.

UPC No.

Packaging

Length

Handled

File Cut

Edge Type

Product Weight

09099N

037103243232

Boxed

8 in

Bastard

One Round

0.25 lb

Shelf Pack Qty.

09389N

037103243263

Boxed

8 in

Bastard

Two Round

0.25 lb

09179N

037103243249

Boxed

10 in

Bastard

One Round

0.45 lb

09469N

037103243270

Boxed

10 in

Bastard

Two Round

0.45 lb

09227N

037103243256

Boxed

12 in

Bastard

One Round

0.80 lb

Axe Sharpening File

■■ American Pattern Axe Sharpening File ■■ Ideal for Sharpening Axes and Miscellaneous Garden Tools ■■ Rectangular Shape ■■ Double-Cut on 1 Side, Single-Cut on Opposite ■■ 2 Safe Edges ■■ Length Measured Exclusive of Handle Cat. No.

UPC No.

Packaging

Length

File Cut

06704N 06706N

Product Weight

Shelf Pack Qty.

037103242907

Boxed

8 in

037103242914

Carded

8 in

Single/Double

0.45 lb

Single/Double

0.50 lb

Square Files

■■ American Pattern Square File, Bastard Cut ■■ Used on Slots, Keyways and General Surface Filing ■■ Square Shape ■■ Double Cut ■■ Tapered Slightly Towards Point ■■ Larger Sizes Frequently Preferred to Corresponding Flat Files ■■ This is Due to A Heavier Section and 4 Filing Surfaces UPC No.

Packaging

Length

Diameter

File Cut

Product Weight

Shelf Pack Qty.

12790

037103127907

Boxed

4 in

5/32 in

Bastard

0.03 lb

12967

037103129673

Boxed

6 in

1/4 in

Bastard

0.10 lb

13081

037103130815

Boxed

8 in

5/16 in

Bastard

0.10 lb

13196

037103131966

Boxed

10 in

3/8 in

Bastard

0.30 lb

13310

037103133106

Boxed

12 in

1/2 in

Bastard

0.65 lb

13425

037103134257

Boxed

14 in

5/8 in

Bastard

1.20 lb

13000N

037103130006

Boxed

6 in

1/4 in

Second

0.08 lb

13114

037103131140

Boxed

8 in

5/16 in

Second

0.10 lb

13229

037103132291

Boxed

10 in

3/8 in

Second

0.30 lb

13343

037103133434

Boxed

12 in

1/2 in

Second

0.68 lb

12857

037103128577

Boxed

4 in

5/32 in

Smooth

0.03 lb

13033

037103130334

Boxed

6 in

1/4 in

Smooth

0.08 lb

13147

037103131478

Boxed

8 in

5/16 in

Smooth

0.55 lb

13262

037103132628

Boxed

10 in

3/8 in

Smooth

0.30 lb

13376

037103133762

Boxed

12 in

1/2 in

Smooth

0.65 lb

F I L E S

Cat. No.

1015

A M E R I C A N

P A T T E R N

Round Files

■■ American Pattern Round File, Bastard Cut ■■ Primarily Used to File Circular Openings or Concave Surfaces ■■ Single Cut ■■ Tapered Slightly Towards Point ■■ Round Shape ■■ Safe Point on Round Files Cat. No.

UPC No.

11526N

037103231901

Packaging

Length

Handled

Diameter

File Cut

Product Weight

Shelf Pack Qty.

Boxed

4 in

1/8 in

Bastard

0.02 lb

11637N

037103231925

Boxed

5 in

3/16 in

Bastard

0.03 lb

11716N

037103231826

Boxed

6 in

1/4 in

Bastard

0.02 lb

21708N

037103232007

Carded

6 in

Yes

1/4 in

Bastard

0.21 lb

21846N

037103232014

Carded

6 in

1/4 in

Bastard

0.12 lb

11904

037103119049

Boxed

8 in

5/16 in

Bastard

0.14 lb

21715

037103217158

Carded

8 in

Yes

5/16 in

Bastard

0.26 lb

21853

037103218537

Carded

8 in

5/16 in

Bastard

0.16 lb

12019

037103120199

Boxed

10 in

3/8 in

Bastard

0.25 lb

21854

037103218544

Carded

10 in

3/8 in

Bastard

0.30 lb

12134

037103121349

Boxed

12 in

1/2 in

Bastard

0.55 lb

12131

037103121318

Carded

12 in

1/2 in

Bastard

0.60 lb

12248

037103122483

Boxed

14 in

5/8 in

Bastard

1.00 lb

11559NN

037103231895

Boxed

4 in

1/8 in

Second

0.02 lb

11748N

037103231987

Boxed

6 in

1/4 in

Second

0.05 lb

11936

037103119360

Boxed

8 in

5/16 in

Second

0.10 lb

12051

037103120519

Boxed

10 in

3/8 in

Second

0.25 lb

12166

037103121660

Boxed

12 in

1/2 in

Second

0.55 lb

11592NN

037103231918

Boxed

4 in

1/8 in

Smooth

0.02 lb

11781N

037103231994

Boxed

6 in

1/4 in

Smooth

0.05 lb

11969

037103119698

Boxed

8 in

5/16 in

Smooth

0.20 lb

12084

037103120847

Boxed

10 in

3/8 in

Smooth

0.30 lb

12199

037103121998

Boxed

12 in

1/2 in

Smooth

0.55 lb

F I L E S

Taper Files - Heavy

1016

■■ American Pattern Taper File, Regular ■■ Made for Filing Saws with 60° Angle Teeth ■■ Triangular Shape ■■ Edges Set and Cut for Filing Gullets Between Saw Teeth ■■ Tapers Slightly Towards the Point ■■ When Filing Handsaws, It is Important to Select the Right File

Cat. No.

UPC No.

14048M

037103142870

Packaging

Length

File Cut

Product Weight

Shelf Pack Qty.

Boxed

7 in

Single

0.30 lb

A M E R I C A N

P A T T E R N

Taper files - Regular

■■ American Pattern Taper File, Regular ■■ Made for Filing Saws with 60° Angle Teeth ■■ Triangular Shape ■■ Single Cut ■■ Edges Set and Cut for Filing Gullets Between Saw Teeth ■■ Tapers Slightly Towards the Point ■■ When Filing Handsaws, It is Important to Select the Right File Cat. No.

UPC No.

Packaging

Length

File Cut

Product Weight

Shelf Pack Qty.

13692M

037103162526

Boxed

3 in

Single

0.03 lb

13710M

037103162533

Boxed

3-1/2 in

Single

0.04 lb

13727M

037103162540

Boxed

4 in

Single

0.05 lb

13772M

037103162564

Boxed

5 in

Single

0.10 lb

13807M

037103143952

Boxed

6 in

Single

0.15 lb

13841M

037103162502

Boxed

7 in

Single

0.25 lb

13875M

037103162595

Boxed

8 in

Single

0.35 lb

13930N

037103218490

Boxed

10 in

Single

0.60 lb

Taper Files - Machete

■■ American Pattern Taper File, Machete ■■ Used for Sharpening Machete Knife Blades ■■ Single Cut with No Edge Teeth ■■ Triangular in Shape ■■ Tapers Slightly Towards the Point UPC No.

Packaging

Length

File Cut

Product Weight

Shelf Pack Qty.

13811M

037103162496

Boxed

6 in

Single

0.15 lb

13814M

037103162779

Boxed

6 in

Single

0.15 lb

13878M

037103162601

Boxed

8 in

Single

0.35 lb

Cat. No.

Taper Files - Slim

Cat. No.

UPC No.

Packaging

Length

Handled

File Cut

Product Weight

Shelf Pack Qty.

14106M

037103142511

Boxed

4 in

Single

0.03 lb

14139M

037103162625

Boxed

4-1/2 in

Single

0.04 lb

14162M

037103142528

Boxed

5 in

Single

0.05 lb

14224M

037103142535

Boxed

6 in

Single

0.09 lb

21729HN

037103217882

Carded

6 in

Ergonomic

Single

1.00 lb

21729N

037103217875

Carded

6 in

Yes

Single

0.20 lb

21866N

037103217929

Carded

6 in

Single

0.11 lb

14255M

037103142610

Boxed

7 in

Single

0.14 lb

21755N

037103264930

Carded

7 in

Yes

Single

2.13 lb

14290M

037103142894

Boxed

8 in

Single

0.30 lb

14341N

037103218377

Boxed

10 in

Single

0.41 lb

F I L E S

■■ American Pattern Taper File, Slim ■■ Made for Filing Saws with 60° Angle Teeth ■■ Triangular Shape ■■ Single Cut ■■ Edges Set and Cut for Filing Gullets Between Saw Teeth ■■ Tapers Slightly Towards the Point ■■ In Filing Handsaws, It is Important to Select the Right File

1017

A M E R I C A N

P A T T E R N

Taper Files - Extra Slim

■■ American Pattern Taper File, Extra Slim ■■ Made for Filing Saws with 60° Angle Teeth ■■ Triangular Shape ■■ Single Cut ■■ Edges Set and Cut for Filing Gullets Between Saw Teeth ■■ Tapers Slightly Towards the Point ■■ In Filing Handsaws, It is Important to Select the Right File Cat. No.

UPC No.

Packaging

Length

Handled

File Cut

Product Weight

Shelf Pack Qty.

14547M

037103142580

Boxed

4 in

Single

0.02 lb

21875N

037103218155

Carded

4 in

Single

0.05 lb

14599M

037103142931

Boxed

5 in

Single

0.03 lb

14600N

037103217806

Carded

5 in

Single

0.05 lb

14665M

037103144034

Boxed

6 in

Single

0.05 lb

21736N

037103217899

Carded

6 in

Yes

Single

0.19 lb

21873N

037103217950

Carded

6 in

Single

0.05 lb

14698N

037103217707

Boxed

7 in

Single

0.10 lb

14696N

037103217837

Carded

7 in

Single

0.15 lb

14729N

037103217714

Boxed

8 in

Single

0.20 lb

F I L E S

Taper Files - Double Extra Slim

1018

■■ American Pattern Taper File, Double Extra Slim ■■ Made for Filing Saws with 60° Angle Teeth ■■ Triangular Shape ■■ Single Cut ■■ Edges Set and Cut for Filing Gullets Between Saw Teeth ■■ Tapers Slightly Towards the Point ■■ In Filing Handsaws, It is Important to Select the Right File Cat. No.

UPC No.

Packaging

Length

Handled

File Cut

Product Weight

Shelf Pack Qty.

14942M 14992M

037103142597

Boxed

4 in

Single

0.02 lb

037103142603

Boxed

5 in

Single

0.03 lb

15024N 21743N

037103217721

Boxed

6 in

Single

0.05 lb

037103217905

Carded

6 in

Yes

Single

0.20 lb

21874N

037103217974

Carded

6 in

Single

0.05 lb

15056N

037103217745

Boxed

7 in

Single

0.04 lb

15087N

037103217752

Boxed

8 in

Single

0.10 lb

A M E R I C A N

P A T T E R N

Three Square Files

■■ American Pattern Three Square File, Bastard Cut ■■ For General Use By Machinists for Filing Internal Angles ■■ More Acute Than Right Angles, Clearing Out Square Corners ■■ Filing Taps and Gutters ■■ Triangular Shape ■■ Double Cut ■■ Sharp Corners Are Slightly Set and Cut ■■ Cut to the Point Cat. No.

UPC No.

Packaging

Length

File Cut

Product Weight

Shelf Pack Qty.

15925N

037103218223

Boxed

6 in

Bastard

0.17 lb

16036N

037103218261

Boxed

8 in

Bastard

0.40 lb

16147N

037103218483

Boxed

10 in

Bastard

0.55 lb

15958N

037103218308

Boxed

6 in

Second

0.15 lb

16069N

037103218278

Boxed

8 in

Second

0.35 lb

16180N

037103218339

Boxed

10 in

Second

0.62 lb

15991N

037103218247

Boxed

6 in

Smooth

0.17 lb

16102N

037103218285

Boxed

8 in

Smooth

0.35 lb

16213N

037103218346

Boxed

10 in

Smooth

0.60 lb

Tungsten Point Files

■■ American Pattern Tungsten Point File ■■ For Dressing Distributor Points That Are Tipped with Tungsten, Iridium ■■ Thin Rectangular Shape ■■ Double-Cut ■■ Chisel Tip of File Enters Slots or Gaps Easily ■■ Handle Shape Tang Cat. No.

UPC No.

Packaging

Length

File Cut

Product Weight

Shelf Pack Qty.

02375N

037103242594

Carded

5-1/4 in

Double

0.03 lb

02373N

037103242587

Boxed

5-1/4 in

Double

0.05 lb

Veneer Knife Files

Cat. No.

UPC No.

10799N

037103243294

F I L E S

■■ American Pattern Veneer Knife File, Blunt, Bastard Cut ■■ Specially Designed for Sharpening Veneer Knives ■■ Thin Rectangular Shape ■■ Blunt, Bastard Cut ■■ 2 Round Edges Packaging

Length

File Cut

Product Weight

Shelf Pack Qty.

Boxed

10 in

Bastard

0.45 lb

1019

A M E R I C A N

P A T T E R N

Warding Files

■■ American Pattern Warding File, Bastard Cut ■■ Used Primarily By Locksmiths in Repairing & Filing Ward Notches in Keys ■■ Thin Rectangular Shape ■■ Double Cut on Sides, Single Cut on Edges ■■ Also Suited for Use in Narrow Spaces Where Other Files Will Not Fit Cat. No.

UPC No.

Packaging

Length

File Cut

Product Weight

Shelf Pack Qty.

16507N

037103243317

Boxed

4 in

Bastard

0.03 lb

16663N

037103243348

Boxed

6 in

Bastard

0.10 lb

16761N

037103243379

Boxed

8 in

Bastard

0.15 lb

16540N

037103243324

Boxed

4 in

Second

0.03 lb

16696N

037103243355

Boxed

6 in

Second

0.10 lb

16794N

037103243386

Boxed

8 in

Second

0.15 lb

16573N

037103243331

Boxed

4 in

Smooth

0.03 lb

16729N

037103243362

Boxed

6 in

Smooth

0.10 lb

16827N

037103243393

Boxed

8 in

Smooth

0.15 lb

Wood Files (Coarse) - Half Round

■■ American Pattern, Half Round Wood File, Coarse ■■ Specially Coarse Teeth for Use on Wood ■■ Made in Same Section and Size As Half Round File Cat. No.

UPC No.

17505N

037103218636

Packaging

Length

File Cut

Product Weight

Shelf Pack Qty.

Boxed

10 in

Coarse

0.50 lb

Product Weight

Shelf Pack Qty.

Wood Chuck

F I L E S

■■ Oversized, impact resistant co-mold handle for years of hard use ■■ Steel strike plate to protect against breakage or mushrooming ■■ Forged steel to retain rasp and chisel sharpness ■■ Edge teeth for removal of material in confined areas ■■ Polished and ground blade, extremely sharp for crisp cut ■■ Flat wood rasp for rapid stock removal

1020

Cat. No.

UPC No.

Packaging

Blade Width

Handled

WC12CMN WC1CMN

037103219930

Carded

1/2 in

Ergonomic

0.47 lb

037103219947

Carded

1 in

Ergonomic

0.63 lb

WC34CMN

037103219954

Carded

3/4 in

Ergonomic

0.53 lb

WCSET3CMN

037103219961

Carded

1/2 in

Ergonomic

1.45 lb

A M E R I C A N

P A T T E R N

4-in-Hand (Formerly Shoe Rasp)

■■ For the Homeowner, Home Craftsman, Boat Builder And Mechanic ■■ Half-Round Shape ■■ Has the File Section And Rasp Section on Both Flat Side And Half-Round Side Cat. No.

UPC No.

Packaging

Length

File Cut

Product Weight

Shelf Pack Qty.

18924N

037103219763

Boxed

8 in

Rasp/Single/Double

0.35 lb

21860N

037103219848

Carded

8 in

Rasp/Single/Double

0.36 lb

19013N

037103219787

Boxed

9 in

Rasp/Single/Double

0.60 lb

21870N

037103219862

Carded

9 in

Rasp/Single/Double

0.40 lb

18962N

037103219794

Boxed

10 in

Rasp/Single/Double

0.60 lb

18960N

037103219909

Carded

10 in

Rasp/Single/Double

0.63 lb

Pattern Maker's Cabinet Rasps

■■ American pattern rasp, pattern maker’s cabinet ■■ Used primarily by cabinetmakers ■■ Half-round shape ■■ Narrow pattern, cut edges ■■ Used when smooth wood finish is required Cat. No.

UPC No.

Packaging

Length

File Cut

Code No.

Product Weight

18846N

037103219640

Boxed

10 in

Second

0.25 lb

Shelf Pack Qty.

18861N

037103219626

Boxed

10 in

Smooth

0.25 lb

Cabinet Rasps

■■ American pattern rasp, half round cabinet, second cut ■■ Used by cabinetmakers and woodworkers ■■ Half round ■■ Single cut on edges ■■ Curved side of rasps similar to half-round rasps but has larger radius UPC No.

Packaging

Length

File Cut

Product Weight

Shelf Pack Qty.

17615N

037103219572

Boxed

8 in

Regular Second

0.23 lb

17683N

037103219596

Boxed

10 in

Regular Second

0.40 lb

17751N

037103219602

Boxed

12 in

Regular Second

0.80 lb

File Cut

Product Weight

Shelf Pack Qty.

F I L E S

Cat. No.

Diamond Horse Rasps

■■ Superior performance in both wet and dry conditions ■■ Resists clogging due to the angled tooth face ■■ Both sides are safe 7/8”/22mm at point ■■ Rasp teeth on 1 side, file teeth on opposite, single cut on edges ■■ Rasp side allows for aggressive, but controlled hoof removal ■■ File side produces a consistent smooth finish ■■ Rectangular shape ■■ Sharper than regular horse rasps ■■ HR15 (Outlaw) rasp is less aggressive, but extremely durable for long life Cat. No.

UPC No.

Packaging

Length

HR14N

037103219510

Boxed

14 in

Rasp/Double

1.40 lb

HR15

037103206343

Boxed

14 in

Rasp/Double

1.65 lb

1021

A M E R I C A N

P A T T E R N

Farrier's Handy Rasps

■■ American pattern farrier's handy rasp, tanged ■■ Rectangular shape ■■ Single cut on edges ■■ Comfortable cushion grip at point and handle ■■ Rasp teeth on 1 side, file teeth on opposite ■■ Rasp cut is 6 teeth per row (other horse rasps have 5 teeth per row) ■■ Body is the same as the 14" Plater's Special Cat. No.

UPC No.

18155N

037103219558

Packaging

Length

File Cut

Product Weight

Shelf Pack Qty.

Boxed

14 in

Rasp/Double

1.45 lb

File Cut

Product Weight

Shelf Pack Qty.

Horse Rasps - Plain 1/2 File

■■ American pattern horse rasp, plain 1/2 file, regular ■■ This thin fine-toothed rasp for shoeing racetrack riding horses & ponies ■■ Plain horse rasps are double-ended with rasp teeth on 1 side ■■ File teeth on opposite side ■■ Rectangular shape Cat. No.

UPC No.

Packaging

Length

17873N

037103219459

Boxed

14 in

Rasp Punch/Coarse

1.10 lb

17903N

037103217998

Boxed

14 in

Rasp Punch/Coarse

1.60 lb

17910N

037103218001

Pouch

14 in

Rasp Punch/Coarse

1.60 lb

File Cut

Product Weight

Shelf Pack Qty.

Magicut® Plater's Special Horse Rasp

■■ American pattern plater's special Magicut horse rasp, tanged ■■ Maximum cutting surface design gives rapid removal and smoother finish ■■ Single cut on edges ■■ Opposite side has the Nicholson® unique Magicut® file pattern ■■ These are narrow chip breakers created by steep and angled serrations ■■ Rectangular shape ■■ Tooth design is cut deeper to last longer ■■ They cut much faster than conventional horse rasps ■■ Rasp cut is 6 teeth per row (other horse rasps have 5 teeth per row)

F I L E S

Cat. No.

UPC No.

Packaging

Length

18130N

037103219534

Boxed

14 in

Rasp/Magicut®

1.35 lb

18153N

037103219480

Pouch

14 in

Rasp/Magicut®

1.45 lb

File Cut

Product Weight

Shelf Pack Qty.

Horse Rasps - Tanged

■■ American pattern horse rasp, tanged ■■ Rectangular shape ■■ Single cut on edges ■■ Tanged ■■ Rasp teeth on 1 side, file teeth on opposite ■■ Thicker than Plater’s Special - ideal for hot rasping Cat. No.

1022

UPC No.

Packaging

Length

18035N

037103219466

Boxed

12 in

Rasp/Double

1.50 lb

18057N

037103219473

Boxed

14 in

Rasp/Double

2.15 lb

A M E R I C A N

P A T T E R N

Woodcraft Rasp - Half Rasp, Half File

■■ American pattern woodcraft rasp, half rasp, half file ■■ Ideal for use in woodworking plants ■■ Also by professional carpenters, hobbyists and DIY enthusiasts ■■ Half-round rasp side for rapid stock removal ■■ File cut side for smoothing purposes ■■ For use on wood, leather, soapstone and soft metals ■■ 8"/200mm length is exclusive of handle Cat. No.

UPC No.

Packaging

Length

File Cut

Product Weight

Shelf Pack Qty.

18617N

037103219749

Boxed

8 in

Rasp Punch/Wood

0.50 lb

23859N

037103219879

Carded

8 in

Bastard

0.60 lb

Wood Rasps - Flat Bastard

■■ American pattern wood rasp, flat bastard ■■ Used by woodworkers, hobbyists and plumbers ■■ For use on wood and soft metals ■■ Flat shape ■■ Bastard cut Cat. No.

UPC No.

19136N

037103219695

Packaging

Length

File Cut

Product Weight

Shelf Pack Qty.

Boxed

10 in

Bastard

0.65 lb

Length

File Cut

Product Weight

Shelf Pack Qty.

Wood Rasps Round Bastard 11

■■ American pattern wood rasp, round, bastard cut ■■ Used for same purpose as regular wood rasps ■■ Used in places for which their shapes make them particularly effective ■■ Round shape ■■ Bastard cut ■■ Made from same size steel as round files Cat. No.

UPC No.

Packaging

19846

037103198464

Boxed

8 in

Bastard

0.15 lb

19875

037103198754

Boxed

10 in

Bastard

0.26 lb

F I L E S

Wood Rasps - Half Round

■■ American pattern wood rasp, half round, bastard cut, red handle ■■ Used by woodworkers, hobbyists and plumbers ■■ Half-round shape ■■ Single cut file teeth on edge ■■ For use on wood and soft metals Cat. No.

UPC No.

Packaging

Length

File Cut

Handled

Product Weight

Shelf Pack Qty.

19394N

037103219633

Boxed

8 in

Bastard

0.25 lb

21878N

037103219718

Carded

8 in

Bastard

0.30 lb

19427N

037103219657

Boxed

10 in

Bastard

0.65 lb

19460N

037103219664

Boxed

12 in

Bastard

0.90 lb

19493N

037103219732

Boxed

14 in

Bastard

1.40 lb

1023

S W I S S

P A T T E R N

Barrette Files

■■ Made to More Exacting Measurements Than American Pattern Files ■■ Used By Tool and Die Makers, Jewelers, Model Makers, Home Craftsman ■■ Recommended for Those Who Do Superfine Precision Filing ■■ Double Cut, Wide Flat Sides ■■ Flat on 1 Side, Backs Are Beveled on Edges as Indicated by Cross Section ■■ Back and Beveled Edges Are Safe ■■ Included Angle is 33° Cat. No.

UPC No.

Packaging

Length

File Cut

Product Weight

Shelf Pack Qty.

35031N

037103241917

Boxed

4 in

0.05 lb

35061N

037103241924

Boxed

6 in

0.10 lb

35025N

037103241900

Boxed

4 in

0.05 lb

35073N

037103241931

Boxed

6 in

0.10 lb

File Cut

Product Weight

Shelf Pack Qty.

Barrette Files - Hot Die

■■ Xf® Files, Swiss Pattern Barrette File, Hot Die, Cut No. 00 ■■ Made to More Exacting Measurements Than American Pattern Files ■■ Used By Tool and Die Makers, Jewelers, Model Makers, Home Craftsman ■■ Recommended for Those Who Do Superfine Precision Filing ■■ Double Cut, Wide Flat Sides ■■ Flat on 1 Side, Backs Are Beveled on Edges as Indicated by Cross Section ■■ Back and Beveled Edges Are Safe ■■ Included Angle is 33° ■■ Approximate Point Thickness is .040”/1.10mm ■■ Same As Regular Barrette Files Except with Thinner Point Cat. No.

UPC No.

Packaging

Length

35108N

037103241948

Boxed

3 in

0.02 lb

35114N

037103241955

Boxed

4 in

0.03 lb

F I L E S

6-1/2" (163mm) Die Sinker's Rifflers

1024

■■ Made to More Exacting Measurements Than American Pattern Files ■■ Used By Tool and Die Makers, Jewelers, Model Makers and Home Craftsman ■■ Made in Approximately 6-1/2"/165mm Length ■■ Made in Shales As Illustrated ■■ Each Riffler Identified By Number

Cat. No.

UPC No.

Packaging

Length

File Cut

Style

Product Weight

Shelf Pack Qty.

35976

037103359766

Boxed

6-1/2 in

0.02 lb

35982

037103359827

Boxed

6-1/2 in

0.02 lb

36018N

037103360182

Boxed

6-1/2 in

0.02 lb

36054

037103360540

Boxed

6-1/2 in

0.02 lb

S W I S S

P A T T E R N

Equaling Files

■■ Made to More Exacting Measurements Than American Pattern Files ■■ Used By Tool and Die Makers, Jewelers, Model Makers and Home Craftsman ■■ Rectangular Shape ■■ Double-Cut on Sides, Single-Cut on Edges ■■ Parallel in Both Width and Thickness for Their Entire Length Cat. No.

UPC No.

Packaging

Length

File Cut

Product Weight

36219N

037103241962

Boxed

4 in

0.05 lb

Shelf Pack Qty.

36227N

037103241979

Boxed

4 in

0.05 lb

36253N

037103241986

Boxed

6 in

0.10 lb

36281N

037103241993

Boxed

8 in

0.25 lb

Product Weight

Shelf Pack Qty.

Half Round Files

■■ Made to More Exacting Measurements Than American Pattern Files ■■ Used By Tool and Die Makers, Jewelers, Model Makers and Home Craftsman ■■ Double Cut on Both Flat and Half-Round Sides ■■ Taper in Thickness and Width to Point ■■ Half Round Shape ■■ Made in Much Finer Cuts, Which Vary From No. 00 (Coarsest) to No. 4 (Finest) UPC No.

Packaging

Length

File Cut

36521N 36563N

037103242006

Boxed

6 in

0.10 lb

037103242068

Boxed

8 in

0.20 lb

12 12

36557N

037103242051

Boxed

8 in

0.20 lb

36527N

037103242013

Boxed

6 in

0.10 lb

36569N

037103242075

Boxed

8 in

0.20 lb

36533N

037103242020

Boxed

6 in

0.10 lb

36539N

037103242037

Boxed

6 in

0.10 lb

36545N

037103242044

Boxed

6 in

0.10 lb

Cat. No.

UPC No.

Packaging

Length

File Cut

Style

Product Weight

Shelf Pack Qty.

37752

037103377524

Boxed

5-1/2 in

Barrette

0.01 lb

38115

037103381156

Boxed

6-1/4 in

Barrette

0.02 lb

F I L E S

Needle Files Round Handle

■■ Hot Die - Barrette Shape Only ■■ Same as Regular Round Handle Needle Barrette Except with Thinner Points

Cat. No.

1025

S W I S S

P A T T E R N

Needle Files

F I L E S

■■ Made to More Exacting Measurements Than American Pattern Files ■■ Used Primarily By Jewelers, Die Makers, Watchmakers and Fine Toolmakers ■■ Knurled Handles

1026

Cat. No.

UPC No.

Packaging

Length

File Cut

Style

Product Weight

Shelf Pack Qty.

37277

037103372772

Boxed

4 in

Barrette

0.01 lb

37640

037103376404

Boxed

5-1/2 in

Barrette

0.01 lb

38003

037103380036

Boxed

6-1/4 in

Barrette

0.02 lb

37647

037103376473

Boxed

5-1/2 in

Barrette

0.01 lb

38010

037103380104

Boxed

6-1/4 in

Barrette

0.02 lb

37500

037103375001

Boxed

5-1/2 in

Crossing

0.01 lb

37863

037103378637

Boxed

6-1/4 in

Crossing

0.02 lb

37870

037103378705

Boxed

6-1/4 in

Crossing

0.03 lb

37249

037103372499

Boxed

4 in

Equaling

0.01 lb

37612

037103376121

Boxed

5-1/2 in

Equaling

0.01 lb

37975

037103379757

Boxed

6-1/4 in

Equaling

0.02 lb

37256

037103372567

Boxed

4 in

Equaling

0.01 lb

37619

037103376190

Boxed

5-1/2 in

Equaling

0.01 lb

37982

037103379825

Boxed

6-1/4 in

Equaling

0.02 lb

37626

037103376268

Boxed

5-1/2 in

Equaling

0.01 lb

37989

037103379894

Boxed

6-1/4 in

Equaling

0.02 lb

37996

037103379962

Boxed

6-1/4 in

Equaling

0.02 lb

37109

037103371096

Boxed

4 in

Flat

0.02 lb

37472

037103374721

Boxed

5-1/2 in

Flat

0.01 lb

37835

037103378354

Boxed

6-1/4 in

Flat

0.02 lb

37116

037103371164

Boxed

4 in

Flat

0.02 lb

37479

037103374790

Boxed

5-1/2 in

Flat

0.01 lb

37842

037103378422

Boxed

6-1/4 in

Flat

0.02 lb

37486

037103374868

Boxed

5-1/2 in

Flat

0.01 lb

37849

037103378491

Boxed

6-1/4 in

Flat

0.02 lb

37081

037103370815

Boxed

4 in

Half Round

0.10 lb

37444

037103374448

Boxed

5-1/2 in

Half Round

0.01 lb

37807

037103378071

Boxed

6-1/4 in

Half Round

0.02 lb

37088

037103370884

Boxed

4 in

Half Round

0.02 lb

37451

037103374516

Boxed

5-1/2 in

Half Round

0.02 lb

37814

037103378149

Boxed

6-1/4 in

Half Round

0.02 lb

37458

037103374585

Boxed

5-1/2 in

Half Round

0.01 lb

37821

037103378217

Boxed

6-1/4 in

Half Round

0.02 lb

37828

037103378286

Boxed

6-1/4 in

Half Round

0.02 lb

37165

037103371652

Boxed

4 in

Knife

0.01 lb

37891

037103378910

Boxed

6-1/4 in

Knife

0.02 lb

37172

037103371720

Boxed

4 in

Knife

0.01 lb

37898

037103378989

Boxed

6-1/4 in

Knife

0.02 lb

37053

037103370532

Boxed

4 in

Round

0.02 lb

37416

037103374165

Boxed

5-1/2 in

Round

0.01 lb

37779

037103377791

Boxed

6-1/4 in

Round

0.01 lb

S W I S S

P A T T E R N

Cat. No.

UPC No.

Packaging

Length

File Cut

Style

Product Weight

Shelf Pack Qty.

37060

037103370600

Boxed

4 in

Round

0.02 lb

37423

037103374233

Boxed

5-1/2 in

Round

0.01 lb

37786

037103377869

Boxed

6-1/4 in

Round

0.02 lb

37430

037103374301

Boxed

5-1/2 in

Round

0.01 lb

37793

037103377937

Boxed

6-1/4 in

Round

0.02 lb

37800

037103378002

Boxed

6-1/4 in

Round

0.02 lb

38059

037103380593

Boxed

6-1/4 in

Slitting

0.02 lb

37703

037103377036

Boxed

5-1/2 in

Slitting

0.02 lb

37193

037103371935

Boxed

4 in

Square

0.01 lb

37556

037103375568

Boxed

5-1/2 in

Square

0.01 lb

37919

037103379191

Boxed

6-1/4 in

Square

0.02 lb

37200

037103372000

Boxed

4 in

Square

0.01 lb

37563

037103375636

Boxed

5-1/2 in

Square

0.01 lb

37926

037103379269

Boxed

6-1/4 in

Square

0.02 lb

37221

037103372215

Boxed

4 in

Three Square

0.01 lb

37584

037103375841

Boxed

5-1/2 in

Three Square

0.01 lb

37947

037103379474

Boxed

6-1/4 in

Three Square

0.02 lb

37228

037103372284

Boxed

4 in

Three Square

0.01 lb

37591

037103375919

Boxed

5-1/2 in

Three Square

0.01 lb

37954

037103379542

Boxed

6-1/4 in

Three Square

0.02 lb

37598

037103375988

Boxed

5-1/2 in

Three Square

0.02 lb

37961

037103379610

Boxed

6-1/4 in

Three Square

0.02 lb

Pillar Files

■■ Made to More Exacting Measurements Than American Pattern Files ■■ Rectangular in Shape ■■ Double Cut on 2 Sides Only ■■ Safe Edges ■■ Tapered in Thickness ■■ Similar in Shape to Hand Files But Only 2/3 As Wide UPC No.

Packaging

Length

File Cut

Product Weight

Shelf Pack Qty.

39861N

037103242099

Boxed

4 in

0.04 lb

39899N

037103242136

Boxed

6 in

0.10 lb

39935N

037103242181

Boxed

8 in

0.23 lb

39971N

037103242211

Boxed

10 in

0.45 lb

39855N

037103242082

Boxed

4 in

0.04 lb

39893N

037103242129

Boxed

6 in

0.10 lb

12 12

39929N

037103242174

Boxed

6 in

0.23 lb

39965N

037103242204

Boxed

10 in

0.45 lb

39992N

037103242228

Boxed

12 in

0.74 lb

39905N

037103242143

Boxed

6 in

0.10 lb

39873N

037103242105

Boxed

4 in

0.04 lb

39911N

037103242150

Boxed

6 in

0.10 lb

39947N

037103242198

Boxed

8 in

0.23 lb

39881N

037103242112

Boxed

4 in

0.04 lb

39923N

037103242167

Boxed

6 in

0.10 lb

F I L E S

Cat. No.

1027

S W I S S

P A T T E R N

Pillar Narrow Files

■■ Made to More Exacting Measurements Than American Pattern Files ■■ Rectangular Shape ■■ Narrow ■■ Double Cut on 2 Sides Only ■■ Safe Edges ■■ Similar to Pillar Files But Are Narrower for Their Length Cat. No.

UPC No.

Packaging

Length

File Cut

Product Weight

Shelf Pack Qty.

40076N 40082N

037103242235

Boxed

6 in

0.08 lb

037103242242

Boxed

6 in

0.08 lb

40088N

037103242259

Boxed

6 in

0.08 lb

Pillar Extra Narrow Files

■■ Made to More Exacting Measurements Than American Pattern Files ■■ Cut on 2 Sides Only ■■ Safe Edges ■■ Similar to Pillar and Pillar Narrow Files But Are Narrower in Length Cat. No.

UPC No.

Packaging

Length

File Cut

Product Weight

Shelf Pack Qty.

40248N

037103242280

Boxed

6 in

0.05 lb

40287N

037103242327

Boxed

8 in

0.11 lb

40242N

037103242273

Boxed

6 in

0.05 lb

40281N

037103242310

Boxed

8 in

0.11 lb

40254N

037103242297

Boxed

6 in

0.05 lb

40222N

037103242266

Boxed

4 in

0.02 lb

40260N

037103242303

Boxed

6 in

0.05 lb

F I L E S

Pippin Files

1028

■■ Xf® Files, Swiss Pattern Pippin File, Cut No. 2 ■■ Made to More Exacting Measurements Than American Pattern Files ■■ Rounded Back Tapers to Sharp Edge ■■ Also Taper to Point in Both Width and Thickness ■■ Sometimes Called "Apple Seed" Files Cat. No.

UPC No.

40506

037103405067

Packaging

Length

File Cut

Shape

Product Weight

Shelf Pack Qty.

Boxed

6 in

Apple Seed

0.08 lb

S W I S S

P A T T E R N

Round Files

■■ Made to More Exacting Measurements Than American Pattern Files ■■ Round Shape ■■ Double Cut ■■ Taper Throughout Length to Fine Point Cat. No.

UPC No.

Packaging

Length

Diameter

File Cut

Product Weight

Shelf Pack Qty.

40580N

037103242334

Boxed

4 in

1/8 in

0.01 lb

40651N

037103242358

Boxed

6 in

3/16 in

0.04 lb

40645N

037103242341

Boxed

6 in

3/16 in

0.04 lb

40687N

037103242372

Boxed

8 in

1/4 in

0.08 lb

40699N

037103242389

Boxed

8 in

1/4 in

0.08 lb

40663N

037103242365

Boxed

6 in

3/16 in

0.04 lb

40705N

037103242396

Boxed

8 in

1/4 in

0.08 lb

40717N

037103242402

Boxed

8 in

1/4 in

0.08 lb

Product Weight

Shelf Pack Qty.

7-1/2" (190mm) Silversmith's Rifflers

■■ Made to More Exacting Measurements Than American Pattern Files ■■ Made in Approximately 7-1/8" (180mm) Lengths Only ■■ Ideal for Fine Work

UPC No.

Packaging

Length

File Cut

41018 41096 41102

Shape

037103410184

Boxed

7-1/2 in

0.07 lb

037103410962

Boxed

7-1/2 in

0.05 lb

037103411020

Boxed

7-1/2 in

0.06 lb

Cat. No.

Warding Files

Cat. No.

UPC No.

Packaging

Length

File Cut

Product Weight

Shelf Pack Qty.

41612N

037103243652

Boxed

6 in

0.10 lb

41636N

037103243676

Boxed

8 in

0.15 lb

41588NN

037103243645

Boxed

4 in

0.03 lb

41618N

037103243669

Boxed

6 in

0.10 lb

F I L E S

■■ Made to More Exacting Measurements Than American Pattern Files ■■ Used By Locksmiths and Anywhere A Thin File is Required ■■ Thin Rectangular in Section with Thickness Approximately 1/8 Their Width ■■ Taper Slightly to Point in Width

1029

C U R V E D

T O O T H

F I L E S

Flexible Files (Without Tang)

■■ Curved Tooth Pattern, Flexible Files (Without Tang) ■■ For Smooth, Rapid Work on Cast Iron, Bronze, Lead, Babbitt, Aluminum ■■ Also for Zinc, Plastics ■■ Any Steel Up to the Hardness of Annealed Tool Steel ■■ Rectangular Shape ■■ Curved Cut ■■ Pitch and Rake Designed to Avoid Pinning and to Provide Smoothest Finish Cat. No.

UPC No.

Packaging

Length

Teeth per inch

File Cut

Product Weight

Shelf Pack Qty.

20205N

037103219312

Boxed

14 in

Fine

0.75 lb

20138N

037103219299

Boxed

12 in

Standard

0.50 lb

Milled Tooth Bodifiles

■■ Curved Tooth Pattern, Flexible Milled Tooth Bodifile, Without Tang ■■ For Smooth, Rapid Work on Cast Iron, Bronze, Lead, Babbitt, Aluminum ■■ Also for Zinc, Plastics ■■ Any Steel Up to the Hardness of Annealed Tool Steel ■■ Rectangular Shape ■■ Curved Cut ■■ Pitch and Rake Designed to Avoid Pinning and to Provide Smoothest Finish ■■ No. Teeth Per Inch: 8; Cut: 50-908 Standard Cat. No.

UPC No.

20189N

037103219404

Packaging

Length

Teeth per inch

File Cut

Product Weight

Shelf Pack Qty.

Boxed

14 in

50-908 Standard

0.75 lb

Product Weight

Shelf Pack Qty.

F I L E S

Flat Files - Rigid Type (With Tang)

1030

■■ Curved Tooth Pattern, Flexible Rigid Type Flat Files (With Tang) ■■ For Smooth, Rapid Work on Cast Iron, Bronze, Lead, Babbitt, Aluminum ■■ Also for Zinc, Plastics ■■ Any Steel Up to the Hardness of Annealed Tool Steel ■■ Rectangular Shape ■■ Curved Cut, Rigid Type with Tang ■■ Pitch and Rake Designed to Avoid Pinning and to Provide Smoothest Finish ■■ No. Teeth Per Inch: 14; Cut: Standard Cat. No.

UPC No.

20239N

037103219411

20291N

037103219343

20342N 20393N

Packaging

Length

Teeth per inch

File Cut

Boxed

8 in

Curved Standard

0.25 lb

Boxed

10 in

Curved Standard

0.50 lb

037103219367

Boxed

12 in

Curved Standard

0.80 lb

037103219428

Boxed

14 in

Curved Standard

1.20 lb

C U R V E D

T O O T H

F I L E S

Flat Babbit Files

■■ Curved Tooth Pattern, Flexible Flat Babbit Files ■■ For Smooth, Rapid Work on Cast Iron, Bronze, Lead, Babbitt, Aluminum ■■ Also for Zinc, Plastics ■■ Any Steel Up to the Hardness of Annealed Tool Steel ■■ Rectangular Shape ■■ Curved Cut ■■ Exactly Like Flat Files in Shape, Dimension and Weight ■■ But Fewer Teeth Per Inch ■■ Pitch and Rake Designed to Avoid Pinning and to Provide Smoothest Finish Cat. No.

UPC No.

Packaging

20479N

037103219381

20496N

037103219435

Length

Teeth per inch

File Cut

Product Weight

Shelf Pack Qty.

Boxed

12 in

Curved

0.82 lb

Boxed

14 in

Curved

1.20 lb

Flat Utility Files

■■ Curved Tooth Pattern, Flexible Flat Utility Files ■■ For Smooth, Rapid Work on Cast Iron, Bronze, Lead, Babbitt, Aluminum ■■ Also for Zinc, Plastics ■■ Any Steel Up to the Hardness of Commercial Tool Steel ■■ Rectangular Shape ■■ Standard-Cut Teeth on 1 Side, Smooth-Cut Teeth on the Opposite ■■ Pitch and Rake Designed to Avoid Pinning and to Provide Smoothest Finish ■■ No. Teeth Per Inch: 10 and 16 UPC No.

20547N

037103219374

Packaging

Length

Teeth per inch

File Cut

Product Weight

Shelf Pack Qty.

Boxed

12 in

10 and 16

Standard/Smooth

0.80 lb

Cat. No.

Half Round Files

Cat. No.

UPC No.

20582N

037103218599

F I L E S

■■ Curved Tooth Pattern, Flexible Half Round Files ■■ For Smooth, Rapid Work on Cast Iron, Bronze, Lead, Babbitt, Aluminum ■■ Also for Zinc, Plastics ■■ Any Steel Up to the Hardness of Commercial Tool Steel ■■ Half Round Shape ■■ Flat on 1 Side, Convex on Opposite ■■ Particularly Adapted for Bearings and Concave Surfaces ■■ No. Teeth Per Inch: 14; Cut: Standard Packaging

Length

Teeth per inch

File Cut

Product Weight

Shelf Pack Qty.

Boxed

8 in

Standard

0.30 lb

1031

C U R V E D

T O O T H

F I L E S

Super Shear

■■ Curved Tooth Pattern, Super Shear Files ■■ A Double Purpose Milled Curved Tooth File ■■ Different and Exclusive with Nicholson® ■■ Rectangular Shape, Curved Cut ■■ Teeth Cut in An Off Center Arc to Permit Fast Cutting ■■ Wide Industrial Usage on Flat and Convex Surfaces ■■ Such As Aluminum, Brass, Babbitt, Bronze, Copper, Magnesium ■■ Iron, Annealed Steel, Soft Metal Alloys, Plastics, Hard Rubber, Hardwood ■■ Smooths As It Roughs Cat. No.

UPC No.

Packaging

Length

Teeth per inch

File Cut

Product Weight

Shelf Pack Qty.

21016N

037103219336

Boxed

8 in

Curved

0.40 lb

21067N

037103219350

Boxed

10 in

Curved

0.45 lb

21118N

037103219398

Boxed

12 in

Curved

0.75 lb

21169N

037103219442

Boxed

14 in

Curved

1.30 lb

Adjustable Flexible File Holder No. 25

■■ Can Be Used with Either 12" or 14" Files ■■ Easily Adjusted for Curving File Outward or Inward ■■ Adjustable Length

Cat. No.

UPC No.

21272N

037103243409

Packaging

Product Weight

Shelf Pack Qty.

Boxed

1.80 lb

Machinist's Scrapers (Handled)

F I L E S

■■ Overall Length of These Tools Including Handle is Approximately 8" ■■ Three Square Shape is Supplied in Hollow Ground with 60° Angle ■■ Comes with Handle

1032

Cat. No.

UPC No.

21667N

037103219770

Packaging

Length

Product Weight

Shelf Pack Qty.

Boxed

3-1/4 in

0.13 lb

File Cleaners

■■ Available in Two Styles: File Card or File Card/Brush ■■ File Card is for General Cleaning of File Teeth ■■ File Card/Brush is for use on Finer Cut Files Cat. No.

UPC No.

21455

037103214553

Packaging

Description

Length

Product Weight

Shelf Pack Qty.

Carded

8" File Cleaner

8 in

0.14 lb

10 in

0.30 lb

10 in

0.30 lb

21458

037103214584

Boxed

10" File and Rasp Cleaner

21467

037103214676

Boxed

10" File Card and Brush

A C C E S S O R I E S

Hoof Sharpening Steel

■■ Specifically Designed to Sharpen Hoof Knives ■■ Sharpening Steel is Designed Specifically to Hone the Edge of Hoof Knives and Similar Tools Cat. No.

UPC No.

10627N

037103243935

Packaging

Product Weight

Shelf Pack Qty.

Carded

0.20 lb

Ergonomic File Handle

■■ Interchangeable Cushion Inserts Designed to Fit Most Popular Files ■■ Rubber-Coated Ergonomic Shape for Better Comfort and Control ■■ Rear Taper, Wide Middle and Flared Neck Increases Push Force

Cat. No.

UPC No.

21474H

037103186232

Packaging

Length

Handle No.

Product Weight

Shelf Pack Qty.

Carded

4-1/2 in

Ergonomic

0.15 lb

Screw-on Handle - Plastic

■■ Screw-On Design Fits Most Popular Files ■■ For Professional or Home Handymen ■■ Handle Made of Strong High-Impact Material ■■ Contoured to Fit Hand for Straight, Lathe and Draw Filing ■■ Non-Slip Textured Finish for Easier Grip

UPC No.

Packaging

Length

Handle No.

Product Weight

Shelf Pack Qty.

21484

037103214843

Carded

3-1/2 in

PH1

0.10 lb

21493

037103214935

Carded

3-3/4 in

PH2

0.10 lb

21502

037103215024

Carded

3-3/4 in

PH3

0.10 lb

21512

037103215123

Carded

4-1/8 in

PH4

0.15 lb

21513

037103215130

Carded

4-1/8 in

PH5

0.13 lb

21514

037103215147

Carded

4-3/4 in

PH6

0.20 lb

21515

037103215154

Carded

5 in

PH7

0.20 lb

21516

037103215161

Carded

5 in

PH8

0.20 lb

Cat. No.

Size File Type

Size

10"

12"

14"

16"

File Type

Mill

PH3

PH4

PH5

PH6

PH7

PH8

10"

12"

14"

16"

Round

PH1

PH2

PH3

PH4

PH5

PH7

Flat

PH3

PH4

PH5

PH6

PH7

PH8

Hand

PH3

PH4

PH5

PH6

PH7

PH8

Square

PH1

PH2

PH3

PH4

PH5

PH6

Triangular

PH1

PH2

PH3

PH4

PH5

PH6

PH7

Half Round

PH3

PH4

PH5

PH6

PH7

PH8

Warding

PH3

PH4

PH5

Cantsaw

PH4

PH5

PH6

Tanged Horse

PH8

Knife

PH3

PH4

PH5

PH6

Platers Special

PH8

F I L E S

SELECTION CHART

1033

A C C E S S O R I E S

Metal Ferruled Wooden Handles

■■ Made From Close Grain Hardwood with Wax Finish ■■ Handles Have Strong Nickel-Plated Metal Ferrules

Cat. No.

UPC No.

Packaging

Length

Handle No.

Product Weight

Shelf Pack Qty.

21511N

037103221292

Boxed

3-3/4 in

0.05 lb

21520N

037103221308

Carded

3-3/4 in

0.10 lb

21494N

037103221278

Boxed

4-1/2 in

0.10 lb

21524N

037103221322

Carded

4-1/2 in

0.12 lb

21528N

037103221537

Carded

4-1/4 in

0.20 lb

21503N

037103221285

Boxed

4-1/8 in

0.08 lb

21522N

037103221315

Carded

4-1/8 in

0.09 lb

21485N

037103221261

Boxed

4-7/8 in

0.11 lb

21526N

037103221339

Carded

4-7/8 in

0.30 lb

21476N

037103221254

Boxed

5-1/4 in

0.10 lb

21470N

037103221346

Boxed

5-3/4 in

000

0.20 lb

21471N

037103221247

Boxed

5-3/4 in

0.19 lb

TG4N

037103227232

Boxed

5 in

RASP

0.15 lb

SELECTION CHART

Size

File Type

10"

12"

14"

File Type

10"

12"

14"

Taper

Warding

Slim

Knife

X Slim

Round

XX Slim

Square

Mill

Cantsaw

Flat

Crosscut

Hand

Tanged Horse

000

Half Round

000

Platers Special

000

Item

Size:

8 x 3/16"

8 x 7/32"

8 x 1/4"

8 x 5/16"

8 x 3/8"

F I L E S

Chainsaw

Carded File Handle - Plastic

■■ Interchangeable Cushion Inserts Designed to Fit Most Popular Files ■■ Handle Made of Strong High-Impact Material ■■ Contoured to Fit Hand for Straight, Lathe and Draw Filing ■■ Non-Slip Textured Finish for Easier Grip ■■ 4 Inserts

1034

Cat. No.

UPC No.

21474

037103214744

Packaging

Length

Handle No.

Product Weight

Shelf Pack Qty.

Carded

4 in

0.15 lb

F I L E S

4 Pc. Standard Bastard File Set

■■ Set Comprised of the 4 Most Common File Shapes ■■ Ergonomic Dual Material Handle

Cat. No.

UPC No.

82820

099575828201

Cat. No.

Description

Cat. No.

Description

82822D

8" Flat Bastard File

82824

8" Half Round Bastard File

82823

8" Round Bastard File

82825

8" Triangle Bastard File

■■ 4" Mini Files in an Assortment of Shapes ■■ Ergonomic Dual Material Handle

Packaging

Product Weight

Shelf Pack Qty.

Tray

2.22 lb

6 Pc. Mini Bastard File Set

Cat. No.

UPC No.

82821

099575828218

Packaging

Handled

Product Weight

Shelf Pack Qty.

Pouch

Ergonomic

0.79 lb

Cat. No.

Description

Cat. No.

Description

4" Flat Mini File

4" Round Mini File

4" Half Round Mini File

4" Square Mini File

4" Knife Mini File

4" Triangle Mini File F I L E S

Flat Bastard File

■■ Efficient File for Removing Flash and Other Particles ■■ Ergonomic Dual Material Handle

Cat. No.

UPC No.

82822D

099575828225

Packaging

Length

Handled

File Cut

Product Weight

Shelf Pack Qty.

Bagged

8 in

Ergonomic

Bastard

0.46 lb

1035

F I L E S

■■ For Enlarging Curved or Round Openings ■■ Ergonomic Dual Material Handle

Cat. No.

UPC No.

82823

099575828232

Packaging

Length

Handled

File Cut

Product Weight

Shelf Pack Qty.

Bagged

8 in

Ergonomic

Bastard

0.30 lb

■■ Provides Spiral Cut for Smooth Finish ■■ Curved on One Side and Flat on the Other ■■ Ergonomic Dual Material Handle

Cat. No.

UPC No.

82824

099575828249

11 F I L E S

1036

UPC No.

82825

099575828256

Half Round Bastard File

Packaging

Length

Handled

File Cut

Product Weight

Shelf Pack Qty.

Bagged

8 in

Ergonomic

Bastard

0.45 lb

■■ Used for Cutting and Cleaning Corners ■■ Ergonomic Dual Material Handle

Cat. No.

Round Bastard File

Triangle Bastard File

Packaging

Length

Handled

File Cut

Product Weight

Shelf Pack Qty.

Bagged

8 in

Ergonomic

Bastard

0.45 lb

M E A S U R I N G

A N D

I N S P E C T I O N

Short Tapes........................................ 1042 Pocket Tapes..................................... 1046 Long Tapes......................................... 1049 Fiberglass Tapes............................... 1053 Oil Gauging Tapes............................. 1057 Surveying/Engineering Tapes........... 1061 Reels and Frames.............................. 1064 Folding Rules..................................... 1066 Measuring Rules................................ 1069 Measuring Wheels............................. 1070

Feeler Gauges.................................... 1071 Spark Plug Gap Gauges..................... 1073 12

Calipers.............................................. 1074 Automotive Inspection Tools............ 1076

Automotive Inspection Tools............. 1080

M E A S U R I N G

Feeler Gauges.................................... 1078

P R O D U C T S

1037

M E A S U R I N G

A N D

I N S P E C T I O N

Measuring Ever since the first Lufkin wood rule was produced in 1869, the Lufkin brand has been synonymous with high quality and unmatched accuracy. Today, Lufkin wood rules, power tapes, engineering and surveying tapes, specialty tapes and measuring wheels comprise one of the widest selections of measuring products available from any manufacturer. ®

For over a century, Lufkin® tapes have been recognized as the standard for accuracy and high quality. Lufkin® steel tapes are manufactured to government standards traceable to the U.S. Department of Commerce, National Institute of Standards and Technology. Periodically, these standards are recalibrated with renewed certification by the N.I.S.T.

POWER TAPES

Task specific markings for higher productivity

Exclusive toggle blade-lock for positive, easy blade control Also available in full chrome

English Feet/Inches

Case designed to fit the hand

Quick Read

Non-slip rubber full overmold grip

Engineers Feet/Decimal

Full-length clearcoat exceeds ASTM abrasion-resistance standards for more durable markings

9 -foot standout on 1-inch blade width models

Metric/Centimeter

Decimal/Metric

English Metric/Centimeter ®

M E A S U R I N G

P R O D U C T S

Durable ABS Hi-Viz orange case with radial ribs for added strength

P atented Quad-Hook® long-life end hook on 1-inch blade-width models

OIL GAUGING TAPES Solid one piece design increases strength and durability

New ergonomic handle allows for a stronger, more comfortable grip and better balance

Line Wiper Ready: Front portion of new handle has an adjusted diameter and longer attachment bolt to fit perfectly with popular tape wipers

1038

English Metric/Millimeter

New turn knob provides more surface area for a more secure grip and helps lessen hand fatigue

M E A S U R I N G

A N D

I N S P E C T I O N

Measuring GearWrench offers the most popular ranges in both feeler and gap gauges as well as Automotive focused calipers. Tools are made of the highest quality materials for a long life of precision measurement. ÂŽ

FEELER GAUGES

Includes one 0.010 brass blade for electronic ignition use

Measures clearances from 0.0015 to 0.035" (0.038 to 0.889mm)

Blade dimensions are 3-5/16" x 1/2"

DIGITAL GAUGES 4 way measurement, inside, outside, depth and step

Stainless steel frame with hardened jaws

Metric/Inch system interchange at any position LCD displays up to 5 digits under large glass window

Data output interface

Zero setting at any position

Graduated scale and thumb roll

Resolution/repeatability 0.0005" x 0.01mm Zero setting at any position

0"-6"scale

P R O D U C T S

Color coded Off, On/Zero and Inch/mm

M E A S U R I N G

Resolution/repeatability 0.001" x 0.01mm

1039

S H O R T

T A P E S

How to Change Short Tape Blades 1. Pull old blade out past end until about 2” of bluish metal spring is exposed. Put a nail in round hole( A) in spring to hold it. 2. Note how old blade is attached, then remove it. 3. New blade is reverse wound, ready to attach to spring. With blade graduations up, turn spring sideways and insert from bottom into slot (B) in new blade. Twist spring and pull back until notches (C) lock at rear of slot (B). 4. Remove nail and return blade to case.

Short Tape Blade Styles A1 yellow clad

A2 yellow clad

A3 yellow clad

• 3/4" width only • Black and red markings one side only • Graduated feet and inches to 1/16ths top edge • Graduated inches to 1/16ths bottom edge, first 12" to 1/32nds • Instantaneous foot readings • Stud marks every 16"

• 3/4" and 1" widths • Graduated feet and inches to 1/16ths top and bottom edge • Vertical numbering • Fractional and decimal equivalent marking • Stud marks every 16"

A4 yellow clad

A5 yellow clad

A6 Chrome clad®

• 3/4" and 1" widths • Graduated feet, 1/10ths and 1/100ths top edge; feet, inches and 1/16ths on bottom edge • Instantaneous foot readings • NOTE: 1" width has red and black markings; 3/4" has black markings only • Stud marks every 16"

• 1-3/16" and 1" widths • Black and red markings one side only • Consecutive inches to 16ths • Stud marks every 16" • Truss marks every 19.2" • Instantaneous foot readings

A7 yellow clad

A8 CHROME clad®

M E A S U R I N G

P R O D U C T S

• 1/2" width only • Black and red markings one side only • Graduated feet and inches to 1/16ths top edge • Graduated inches to 1/16ths bottom edge, first 12 inches to 1/32nds • Instantaneous foot readings • Stud marks every 16"

1040

• 1/2" width only • Black markings one side only • Graduated to 1/10ths of inches on both edges • First 6" on bottom edge graduated to 1/50ths

• 1/2" width only • Chrome Clad® blade • Black markings one side only • Graduated consecutive inches and 1/16ths on top and bottom edges

• 1/2" width only • Chrome Clad® blade • Black markings one side only • Graduated to 1/10ths of inches on both edges

A9 YELLOW clad

• Available in 13mm, 19mm and 25mm widths • Black and red markings one side only • Both edges graduated to millimeters; numbered consecutive centimeters with larger red numbers at each decimeter

S H O R T

T A P E S

A12 yellow clad

A13 yellow clad

• 3/4"/19mm width • Black and red markings one side only • Top edge graduated and numbered inches (no stud centers); bottom edge graduated in millimeters, numbered consecutive millimeters with red number at each decimeter • Stud marks every 16" and 40cm

• 1/2"/13mm and 3/4"/19mm widths • Black and red markings one side only • Top edge to 1/16ths, continuous inches; feet and decimeters marked in red • Bottom edge graduated to millimeters, numbered consecutive centimeters

A16 yellow clad

A17 yellow clad

A18 yellow clad

• 1/4" width only • Black markings one side only • Consecutive inches to 1/16ths bottom edge, first 12” to 1/32nds • Stud marks every 16” and 40cm

• 1/4"/6mm width only • Black markings one side only • Top edge graduated in inches to 1/16ths • Bottom edge graduated in millimeters, numbered in centimeters; 1 to 9 in each decimeter

A19 yellow clad

A20 yellow clad

A11 yellow clad

• 1/2"/13mm width only • Black and red markings one side only • Top edge graduated and numbered inches • Bottom edge to millimeters, numbered consecutive millimeters with red number at each decimeter

A29 yellow clad

• 6mm width only • Markings both sides • Consecutive centimeters to millimeters on side 1 • Diameter to millimeters side 2, numbered in centimeters

A30 yellow clad

A35 yellow clad

A36 yellow clad

• 1" width only • Black and red markings one side only • Graduated in feet, 1/10ths and 1/100ths of feet, numbered in feet and 10ths of feet

• 1/2" width only • Black and red markings one side only • Top edge numbered every 10 millimeters with red print for every 100cm increment and graduations every millimeter. Bottom edge numbered in consecutive inches graduated in 1/10ths of an inch with first 12" graduated to 1/50ths and numbered in 10ths

A31 yellow clad

• 1/2" width only • Black and red markings on one side only • Graduated to 1/16ths on top edge graduated in 1/32nds • 1/10ths on bottom edge; first 6 inches graduated in 1/50ths

A37 yellow clad

P R O D U C T S

• 1"/25mm width only • Markings one side only • English top edge to 1/16ths, first 12" to 1/32nds, (continuous inches plus consecutive inch marks within each foot from 1' mark). Truss marks every 19.2" • Metric bottom edge graduated to millimeters, numbered consecutive centimeters

• 1/4" width only • Black markings both sides • One side marked 1/4th scale (1 to 240), other side has 1/8th scale (1 - 480)

M E A S U R I N G

• 3/4"/19mm and 1"/25mm widths • Black and red markings one side only • Graduated millimeters on top edge and feet • 1/10ths and 1/100ths on bottom edge

A21 yellow clad

• 1/4" width only • Markings both sides • Consecutive inches to 1/16ths, first 12” to 1/32nds on side 1 • Diameter inches to 1/100ths side 2; blank space ahead of zero

• 1/4" width only • Black markings both sides • Consecutive inches to 1/16ths, first 12" to 1/32nds on side 1 • Diameter inches to 1/64ths side 2; blank space ahead of zero

• 1" width only • Black and red markings one side only • Top edge graduated to 1/16ths, and numbered in consecutive inches and fractional equivalents to 1/8ths. • Bottom edge with red print numbered at the mid-point of the measurement on the top edge

1041

P O W E R

R E T U R N

T A P E S

Series P1000

M E A S U R I N G

P R O D U C T S

■■ Hi-Viz® Orange Case - Easy to Find on the Job ■■ Rubber Cushion Case Exterior Protects Tape From Impact and Improves Grip ■■ Fits Easily Into Most Tape Holsters ■■ Bright Yellow Blade Has Clear Easy-To-Read Numerals ■■ Toggle Lock is Positioned for Convenient Operation ■■ Holds the Blade Securely in Any Position ■■ Cushioned Blade Return

1042

Packaging

Case Color

Blade Width

Blade Length

Blade Style

Replacement Blade Cat No.

Product Weight

Shelf Pack Qty.

037103252081

Carded

Hi-Viz® Orange

1 in

33 ft

None

1.34 lb

PHV1433DM

037103252098

Carded

Hi-Viz® Orange

25 mm, 1 in

10 m, 33 ft

A29

None

1.34 lb

PHV1410CME

037103252074

Carded

Hi-Viz® Orange

25 mm, 1 in

10 m, 33 ft

A30

None

1.34 lb

PHV1425

037103252005

Carded

Hi-Viz® Orange

1 in

25 ft

None

1.07 lb

PHV1425D

037103252012

Carded

Hi-Viz® Orange

1 in

25 ft

None

1.07 lb

PHV1425ED

037103252029

Carded

Hi-Viz® Orange

1 in

25 ft

A35

None

1.07 lb

PHV1048CM

037103251978

Carded

Hi-Viz® Orange

25 mm

None

1.07 lb

PHV1048CME

037103251985

Carded

Hi-Viz® Orange

25 mm, 1 in

8 m, 26 ft

A30

None

1.07 lb

PHV1048DM

037103251992

Carded

Hi-Viz® Orange

1 in

25 ft

A29

None

1.07 lb

PHV1316

037103251930

Carded

Hi-Viz® Orange

3/4 in

16 ft

RW316

0.62 lb

PHV1035CM

037103251916

Carded

Hi-Viz® Orange

19 mm

None

0.62 lb

5 m, 16 ft

A13

RY35CME

0.62 lb

Cat. No.

UPC No.

PHV1433

PHV1035CME

037103251923

Carded

Hi-Viz® Orange

19 mm, 3/4 in

PHV1312

037103251848

Carded

Hi-Viz® Orange

3/4 in

12 ft

R1312

0.60 lb

PHV1312D

037103251855

Carded

Hi-Viz® Orange

3/4 in

12 ft

None

0.60 lb

4 m, 13 ft

A13

None

0.60 lb

PHV1034CME

037103251824

Carded

Hi-Viz® Orange

19 mm, 3/4 in

PHV1034DM

037103251831

Carded

Hi-Viz® Orange

19 mm, 3/4 in

3.7 m, 12 ft

A29

None

0.60 lb

PHV1012

037103251770

Carded

Hi-Viz® Orange

1/2 in

12 ft

RY212

0.32 lb

4 m, 13 ft

A13

None

0.32 lb

PHV1024CME

037103251787

Carded

Hi-Viz® Orange

13 mm, 1/2 in

PHV1010

037103251701

Carded

Hi-Viz® Orange

1/2 in

10 ft

RY210

0.29 lb

PHV1023CM

037103251718

Carded

Hi-Viz® Orange

13 mm

None

0.29 lb

Hi-Viz® Orange

13 mm, 1/2 in

3 m, 10 ft

A13

RY23CME

0.29 lb

PHV1023CME

037103251725

Carded

P O W E R

R E T U R N

T A P E S

Series P2000

■■ Case Designed to Fit Perfectly in the Hand ■■ Lightweight, High Strength Chrome Finished Case ■■ Fits Easily Into Most Tape Holsters ■■ Bright Yellow Blade Has Clear Easy-To-Read Numerals ■■ Toggle Lock Positioned for Convenient Operation, Holds Blade Securely ■■ Cushioned Blade Return ■■ Removable Belt Clip Cat. No.

UPC No.

P2133

037103252067

Packaging

Case Color

Blade Width

Blade Length

Blade Style

Replacement Blade Cat No.

Product Weight

Shelf Pack Qty.

Carded

Chrome

1 in

33 ft

None

1.72 lb

P2133D

037103252043

Carded

Chrome

1 in

33 ft

None

1.72 lb

P2410CME

037103252050

Carded

Chrome

25 mm, 1 in

10 m, 33 ft

A30

None

1.72 lb

P2125

037103251954

Carded

Chrome

1 in

25 ft

None

1.07 lb

P2048CME

037103251961

Carded

Chrome

25 mm, 1 in

8 m, 26 ft

A30

None

1.07 lb

P2316

037103251909

Carded

Chrome

3/4 in

16 ft

RW316

0.62 lb

P2335ME

037103251893

Carded

Chrome

19 mm, 3/4 in

5 m, 16 ft

A12

RY35ME

0.62 lb

P2035CM

037103251879

Carded

Chrome

19 mm

None

0.60 lb

P2035CME

037103251886

Carded

Chrome

19 mm, 3/4 in

5 m, 16 ft

A13

RY35CME

0.60 lb

P2312

037103251817

Carded

Chrome

3/4 in

12 ft

R2312

0.60 lb

6 6

P2312D

037103251800

Carded

Chrome

3/4 in

12 ft

None

0.60 lb

P2034CME

037103251794

Carded

Chrome

19 mm, 3/4 in

4 m, 13 ft

A13

None

0.60 lb

P2212

037103251763

Carded

Chrome

1/2 in

12 ft

RY212

0.32 lb

P2212X

037103251756

Carded

Chrome

1/2 in

12 ft

None

0.32 lb

P2212DX

037103251749

Carded

Chrome

1/2 in

12 ft

A31

None

0.32 lb

037103251732

Carded

Chrome

13 mm, 1/2 in

4 m, 13 ft

A13

None

0.32 lb

037103251695

Carded

Chrome

1/2 in

10 ft

RY210

0.29 lb

P2210MEX

037103251671

Carded

Chrome

13 mm, 1/2 in

3 m, 10 ft

A36

None

0.29 lb

P2223CME

037103251688

Carded

Chrome

13 mm, 1/2 in

3 m, 10 ft

A13

RY23CME

0.29 lb

M E A S U R I N G

Quickread® Power Tapes

UPC No.

PQR1312

037103251862

Packaging

Case Color

Blade Width

Blade Length

Blade Style

Replacement Blade Cat No.

Product Weight

Shelf Pack Qty.

Carded

Hi-Viz® Orange

3/4 in

12 ft

None

0.60 lb

PQR1316

037103251947

Carded

Hi-Viz® Orange

3/4 in

16 ft

None

0.62 lb

PQR1425*

037103252036

Carded

Hi-Viz® Orange

1 in

25 ft

None

1.07 lb

P R O D U C T S

■■ Graduations Printed in Fractions and Decimal Equivalents ■■ Rubber Cushion Case Exterior Protects Tape From Impact and Improves Grip ■■ Positive Toggle Lock Holds Blade Securely at Any Length ■■ Self-Compensating End Hook for Inside and Outside Measurements ■■ Durable ABS Case Withstands Rugged Use on the Job Site ■■ Built in Bumper Reduces Shock When Blade is Retracted ■■ Blade Style: A3 Cat. No.

P2024CME P2210

* Patented End Hook Lasts 10 Times Longer Than Ordinary End Hooks

1043

P O W E R

R E T U R N

T A P E S

Power Return

■■ Positive Toggle Lock Holds Blade Securely at Any Length ■■ Chrome or Easy-To-Find Hi-Viz® Orange Case Finish Available ■■ Self-Compensating End Hook for Inside and Outside Measurements ■■ Patented Quad Hook Extends Blade Life By Reducing Blade Breakage ■■ Built in Bumper Reduces Shock Upon Blade Retraction, Extends Tape Life ■■ Removable Belt Clip ■■ All Shelf Pack Power Tapes Are Carded Cat. No.

UPC No.

HV420

037103104168

Packaging

Case Color

Blade Width

Blade Length

Blade Style

Replacement Blade Cat No.

Product Weight

Shelf Pack Qty.

Carded

Orange

1 in

20 ft

None

0.72 lb

Y420

037103104113

Carded

Chrome

1 in

20 ft

None

0.70 lb

Y46CME

037103001047

Carded

Chrome

25 mm, 1 in

6 m, 20 ft

A30

None

0.80 lb

HV116

037103039149

Carded

Orange

1 in

16 ft

None

0.70 lb

M E A S U R I N G

P R O D U C T S

800 Series Xtra-Wide Power Tape

1044

■■ New Blade Design Achieves 10' Stand-Out, Make Longer Measurements ■■ Soft Touch Lock Button for Better Feel and Control ■■ Rubber Cushion Absorbs Impact and Improved Grip ■■ Case Designed to Fit Your Hand ■■ Clearcoat Blade Protection - More Durable Markings ■■ 4-Rivet Reinforced End Hook - Increased Strength for Long Blade Life ■■ Non-Slip Slide Lock for Positive Blade Locking ■■ Easy On/Off Belt Clip for Fast Attachment to Belt Packaging

Case Color

Blade Width

Blade Length

Blade Style

Replacement Blade Cat No.

Product Weight

Shelf Pack Qty.

037103222923

Carded

Orange

1-3/16 in

25 ft

None

1.25 lb

037103223999

Carded

Orange

1-3/16 in

25 ft

None

1.03 lb

037103225856

Carded

Orange

30 mm, 1-3/16 in

8 m, 26 ft

A30

None

1.03 lb

Cat. No.

UPC No.

XL8525 XL8525D XL8548CME

800 Series Xtra-Wide Control Power Tape

■■ Drag Strip™ Finger Access for Measuring and Retraction Control ■■ Wide End-Hook Holds Better and Makes Marking Easier ■■ New Blade Design Achieves 10' Stand-Out, Make Longer Measurements ■■ Clearcoat Blade Protection - More Durable Markings ■■ Durable Case Allows for Added Control and Grip ■■ Integrated D-ring for Tether Strap or Easy Handing Storage ■■ Easy On/Off Belt Clip for Fast Attachment to Belt

Cat. No.

UPC No.

CS8516 CS8525 CS8525CME

Blade Length

Blade Style

Replacement Blade Cat No.

Product Weight

Shelf Pack Qty.

1-3/16 in

16 ft

None

0.55 lb

1-3/16 in

25 ft

None

1.22 lb

30 mm, 1-3/16 in

8 m, 26 ft

A30

None

1.24 lb

Packaging

Case Color

Blade Width

037103263537

Carded

Orange

037103263544

Carded

Orange

037103263551

Carded

Orange

P O W E R

R E T U R N

T A P E S

700 Series Auto-Lock

■■ Automatic Blade Lock Holds the Blade in Extended Position ■■ Recessed Lock Release to Reduce Chance of Accidental Retraction ■■ Non-Slip Co-Molded Rubber Grip ■■ Durable Clearcoat Blade Protection for Longer Blade Life ■■ Steel Reinforced End Hook for Longer Service Life ■■ Tough ABS Case to Stand Up to the Toughest Work Site

Cat. No.

UPC No.

Packaging

Case Color

Blade Width

Blade Length

Blade Style

Replacement Blade Cat No.

Product Weight

Shelf Pack Qty.

AL725

037103214539

Carded

Orange

1 in

25 ft

None

0.80 lb

AL748CME

037103214546

Carded

Orange

25 mm, 1 in

8 m, 26 ft

None

0.80 lb

Blade Style

Replacement Blade Cat No.

Product Weight

Shelf Pack Qty.

700 Series Magnetic End Hook

■■ Magnetic End Hook is a Time-Saver for Framers, HVAC Installers, and More ■■ Use for One-Man Measurements of Steel Framing and Drop Ceiling Grids ■■ Powerful Dual Magnets Can Also Serve As A Pick-Up Tool ■■ Non-Slip Co-Molded Rubber Grip ■■ Durable ABS Case Stands Up to the Toughest Work Site ■■ Non-Slip Rubber Blade Lock Button Cat. No.

UPC No.

Packaging

Case Color

Blade Width

Blade Length

037103214560

Carded

Orange

1 in

25 ft

None

0.80 lb

037103214522

Carded

Orange

25 mm, 1 in

8 m, 26 ft

A13

None

0.80 lb

M E A S U R I N G

700 Series Auto-Lock, Magnetic End Hook

UPC No.

AL725MAG

037103215666

Packaging

Case Color

Blade Width

Blade Length

Blade Style

Replacement Blade Cat No.

Product Weight

Shelf Pack Qty.

Carded

Orange

1 in

25 ft

None

0.88 lb

P R O D U C T S

■■ Automatic Blade Lock Holds the Blade in Extended Position ■■ Recessed Lock Release to Reduce Chance of Accidental Retraction ■■ Magnetic End Hook is a Time-Saver for Framers, HVAC Installers, and More ■■ Use for One-Man Measurements of Steel Framing and Drop Ceiling Grids ■■ Powerful Dual Magnets Can Also Serve As A Pick-Up Tool ■■ Non-Slip Co-Molded Rubber Grip ■■ Durable Clearcoat Blade Protection for Longer Blade Life ■■ Steel Reinforced End Hook for Longer Service Life ■■ Tough ABS Case to Stand Up to the Toughest Work Site Cat. No.

L725MAG L748MAG

1045

P O W E R

R E T U R N

T A P E S

L600 Series Power Return Tapes

■■ Lightweight, High Strength, Case Fits Comfortably in Hand ■■ Hi-Viz® Blue Case - Easy to Find on the Job ■■ Unique Slide Lock Design Allows for Easy Control of Tape Blade ■■ Wide Base Helps Keep Tape Standing Upright ■■ Clear Coat Blade Protection for More Durable Markings ■■ Easy-To-Read Yellow Clad Blade (Not Replaceable) ■■ Fits Easily in Most Tape Holsters Cat. No.

UPC No.

Packaging

Case Color

Blade Width

Blade Length

Blade Style

Replacement Blade Cat No.

Product Weight

Shelf Pack Qty.

L610

037103241061

Carded

Orange

1/2 in

10 ft

None

0.25 lb

L610CME

037103241078

Carded

Orange

13 mm, 1/2 in

3 m, 10 ft

A13

None

0.25 lb

L616

037103241085

Carded

Orange

3/4 in

16 ft

None

0.45 lb

L616CME

037103241092

Carded

Orange

19 mm, 3/4 in

5 m, 16 ft

A13

None

0.45 lb

L625

037103241108

Carded

Orange

1 in

25 ft

None

0.80 lb

L625CME

037103241115

Carded

Orange

25 mm, 1 in

8 m, 26 ft

A13

None

0.80 lb

L625SCTMP

037103241122

Carded

Orange

1 in

25 ft

A37

None

0.80 lb

QRL625MP

037103241139

Carded

Blue

1 in

25 ft

None

0.80 lb

Mezurall™

M E A S U R I N G

P R O D U C T S

■■ Chrome Plated Case ■■ Yellow Clad Blade ■■ Power Retraction Operation ■■ Belt Clip

1046

Cat. No.

UPC No.

Packaging

Blade Width

W928 W9210

037103458728

Carded

037103458735

Carded

Y8210

037103457967

W9212

037103458742

W9312

Replacement Blade Cat No.

Product Weight

Shelf Pack Qty.

None

0.20 lb

RY210

0.30 lb

None

0.20 lb

RY212

0.26 lb

RW312

0.40 lb

12 ft

None

0.38 lb

3 m, 10 ft

A11

None

0.24 lb

RY212

0.24 lb

Blade Style

Replacement Blade Cat No.

Product Weight

Shelf Pack Qty.

Blade Length

Blade Style

1/2 in

8 ft

1/2 in

10 ft

Carded

1/2 in

10 ft

Carded

1/2 in

12 ft

037103458780

Carded

3/4 in

12 ft

W9312D

037103458797

Carded

3/4 in

W9210ME

037103458766

Carded

13 mm, 1/2 in

Y8212

037103457981

Carded

1/2 in

12 ft

Mezurall™ Chrome Clad®

■■ 1/2" X 12' Chrome Clad® Blade ■■ Ideal for Industrial Use ■■ Chrome Plated Case ■■ Hard Chrome Plated Blade is Tough and Accurate ■■ Power Retraction Operation

Cat. No.

UPC No.

Packaging

Blade Width

Blade Length

C9212X C9212

037103455574

Carded

1/2 in

12 ft

None

0.30 lb

037103455567

Carded

1/2 in

12 ft

None

0.30 lb

P O C K E T

T A P E S

Pee Wee™

■■ Pocket Size Ideal for Office or Home ■■ High Strength Case ■■ Yellow Clad Blade ■■ 1/4"/6mm Wide Blade is Flexible; Bold Graduations on Yellow Background ■■ Power Retraction Operation Cat. No.

UPC No.

Packaging

Blade Width

Blade Length

Y613ME W616

Blade Style

037103104106

Carded

6 mm, 1/4 in

3 m, 10 ft

A17

037103458575

Carded

1/4 in

6 ft

A16

W6110

037103458544

Carded

1/4 in

10 ft

A16

W616BO

037103028624

Carded

1/4 in

6 ft

Replacement Blade Cat No.

Product Weight

Shelf Pack Qty.

None

0.11 lb

None

0.10 lb

None

0.12 lb

A16

None

0.00 lb

Executive® ThinLine

■■ Convenient for Office, Briefcase, or Pocket ■■ 6' Easy-To-Read Blade ■■ Power Retraction

Packaging

Blade Width

Blade Length

Blade Style

Replacement Blade Cat No.

Product Weight

Shelf Pack Qty.

037103458551

Boxed

1/4 in

6 ft

A16

None

0.09 lb

W606ME

037103458520

Boxed

6 mm, 1/4 in

2 m, 6 ft

A17

None

0.09 lb

W608

037103458568

Boxed

1/4 in

8 ft

A16

None

0.10 lb

Cat. No.

UPC No.

W606

Executive® Diameter

Packaging

Blade Width

Blade Length

Blade Style

Replacement Blade Cat No.

Product Weight

Shelf Pack Qty.

037103458506

Boxed

1/4 in

6 ft

A18

None

0.09 lb

W606PD

037103458513

Boxed

1/4 in

6 ft

A19

RW06PD

0.08 lb

W606PM

037103458537

Boxed

6 mm

A20

None

0.09 lb

Cat. No.

UPC No.

W606P

P R O D U C T S

Architect's Pocket Scale

■■ Yellow Clad Blade ■■ 1/4"/6mm Yellow Steel Blade Has Jet Black Markings ■■ Automatic Blade Return ■■ Blade Style: A21

Cat. No.

UPC No.

W393

037103458483

M E A S U R I N G

■■ Designed for Measuring Diameters of Pipe, Cable, Tire, etc. ■■ Polished Chrome Case ■■ Zero Falls in the Same Place on Each Side of the Blade ■■ Conversion From Diameter to Circumference, Simply Turn the Blade ■■ Easy-To-Read Bold Graduations on Yellow Background ■■ Spring Action Returns Blade to Case

Packaging

Blade Width

Blade Length

Blade Style

Replacement Blade Cat No.

Product Weight

Shelf Pack Qty.

Boxed

1/4 in

5 ft

A21

None

0.20 lb

1047

L O N G

B L A D E S

Long Tape Blade Styles B1 yellow clad

B2 CHROME CLAD®

B3 CHROME CLAD® AND NUBIAN®

• 3/8" width only • Yellow clad blade • Black and red markings one side only • Graduated feet and inches to 1/8ths with instantaneous readings; 16” centers indicated by a diamond

• 3/8" width only • Chrome Clad® blade • Black markings one side only • Graduated feet and inches to 1/16ths with instantaneous readings

• 3/8" width only • Chrome Clad® and Nubian® blade • Black markings one side only • Graduated consecutive inches to 1/16ths

B4 CHROME CLAD®

B5 CHROME CLAD® AND YELLOW CLAD

B7 CHROME CLAD® AND NICKEL CLAD®

• 3/8" width only • Chrome Clad® and yellow clad blade • Black markings one side only • Graduations feet to 1/10ths and 1/100ths

• 3/8" width only • Chrome Clad®, nickel clad and yellow clad blade • Black markings one side only • Graduated feet and inches to 1/8ths with instantaneous readings; 16" centers indicated by diamond

B9 YELLOW CLAD

B10 CHROME CLAD® AND NUBIAN®

• 3/8" width only • Chrome Clad® blade • Black markings one side only • Graduated consecutive inches to 1/10ths

B8 YELLOW CLAD

M E A S U R I N G

P R O D U C T S

• 3/8" width only • Nubian® and Chrome Clad® blade • Markings both sides • One side graduated 1/10ths and 1/100ths of feet; other side diameter feet and 1/10ths of inches

B11 NUBIAN®

B12 NUBIAN®

B14 YELLOW CLAD AND CHROME CLAD®

• 3/8" width only • Nubian® blade • Markings both sides • Graduated feet, inches and 1/8ths one side; other side graduated diameter feet and inches with an extra diameter inch subdivided to 64ths left hand

• 3/8" width only • Nubian® blade • Markings both sides • Graduated consecutive inches to 1/16ths one side; other side to diameter inches, with an extra diameter inch subdivided to 64ths left hand

B15 CHROME CLAD® 80

• 10mm width • Yellow clad and Chrome Clad® blade • Marked both sides • One side meters, decimeters and millimeters; other side reads diameter from circumference to 2m of diameter in millimeters

1048

BY INCHES AND TENTHS OF INCHES

• 3/8"/10mm width only • Yellow clad blade • Black and red markings both sides • One side graduated feet and inches to 1/8ths with instantaneous readings; other side graduated in consecutive millimeters with instantaneous meter numbers at every 100mm

• 3/8" width only • Yellow clad blade • Black and red markings both sides • Bottom side graduated millimeters, numbered in centimeters and meters • Top side graduated feet and inches to 1/8ths with instantaneous readings; 16" centers indicated by a diamond

2 0 ϒC 5 0 N

• 3/8" width • Yellow clad and Chrome Clad® blade • Black and red markings both sides • Front side graduated in feet and inches to 1/8ths; back side in meters and millimeters numbered in centimeters

L O N G

B L A D E S

Anchor®

■■ Rugged, Vinyl-Covered Steel Case ■■ Chrome Clad® Blade ■■ Large Easy-Action Winding Drum and Friction Washers ■■ Nylon Roller Guides the Tape Smoothly in and Out of Case

Cat. No.

UPC No.

C213

037103451408

Packaging

Blade Width

Blade Length

Blade Style

Replacement Blade Cat No.

Product Weight

Shelf Pack Qty.

Boxed

3/8 in

50 ft

None

1.00 lb

C213C

037103451514

Boxed

3/8 in

600 in

None

0.93 lb

C213CX

037103451538

Boxed

3/8 in

600 in

None

1.00 lb

C213D

037103451552

Boxed

3/8 in

50 ft

OC213D

0.90 lb

C216

037103451606

Boxed

3/8 in

100 ft

None

1.70 lb

C21616THBLK

037103451675

Boxed

3/8 in

100 ft

None

1.60 lb

C216D

037103451699

Boxed

3/8 in

100 ft

None

1.55 lb

Leader®

■■ Sturdy, Rust-Resistant Steel Case Has A Tough, Black Vinyl Cover ■■ Chrome Clad® Blade ■■ Jet-Black Markings Are Bonded to the Steel ■■ Recessed Below the Hard Chrome Surface; Highly Resistant to Wear ■■ Large Easy Action Winding Drum and Friction Washers ■■ Nylon Roller Guides the Tape Smoothly in and Out of Case ■■ Folding End Hook Ring Blade Width

Blade Length

Blade Style

Replacement Blade Cat No.

Product Weight

Shelf Pack Qty.

037103452016

Boxed

3/8 in

50 ft

None

1.00 lb

037103452061

Boxed

3/8 in

100 ft

None

1.70 lb

UPC No.

HC253 HC256

Challenge™

Packaging

Blade Width

Blade Length

Blade Style

Replacement Blade Cat No.

Product Weight

Shelf Pack Qty.

037103451309

Boxed

3/8 in

33 ft

B11

O261PTH

0.70 lb

037103452092

Boxed

3/8 in

50 ft

B11

None

0.80 lb

Cat. No.

UPC No.

261PTH 263P

P R O D U C T S

■■ Challenge(Tm); Nubian® Case, Drum Assembly ■■ Etched Tape Line is Designed to Perform for Years ■■ Vinyl Covered Steel Case ■■ Chrome Clad® Blade ■■ Easy Action Winding Drum and Friction Washers ■■ Nylon Rollers Guide the Tape Smoothly in and Out of Case ■■ P in the Suffix of the Number Denotes Diameter

M E A S U R I N G

Packaging

Cat. No.

1049

L O N G

B L A D E S

Hi-Viz® Speedwinder®

■■ Impact-Resistant, Attractive, Self-Standing Case ■■ Heavy Duty Yellow Clad Blade Protected By An Abrasion Resistant Coating ■■ Extends, Rewinds in Less Time Than Conventional Long Steel Tapes ■■ Easy-To-Read Bold Black Markings

Cat. No.

UPC No.

HYT50

037103458155

Packaging

Blade Width

Blade Length

Blade Style

Replacement Blade Cat No.

Product Weight

Shelf Pack Qty.

Boxed

3/8 in

50 ft

None

0.85 lb

HYT100

037103458162

Boxed

3/8 in

100 ft

None

1.50 lb

HYT100D

037103460196

Boxed

3/8 in

100 ft

None

1.50 lb

6 6

HYT15CME

037103459411

Boxed

10 mm, 3/8 in

15 m, 50 ft

B14

None

0.90 lb

HYT30CME

037103459428

Boxed

10 mm, 3/8 in

30 m, 100 ft

B14

None

1.20 lb

HYT50CME

037103003461

Boxed

10 mm, 3/8 in

50 m, 164 ft

B14

RHY50CME

1.50 lb

Blade Style

Replacement Blade Cat No.

Product Weight

Shelf Pack Qty.

M E A S U R I N G

P R O D U C T S

Banner™

1050

■■ Professional Tradesman’s Quality ■■ Rugged, Vinyl-Covered Steel Case ■■ Yellow Clad Tape; 3/8"/10mm Wide and 0.008"/0.2mm Thick ■■ Large Easy Action Winding Drum and Friction Washers ■■ Nylon Rollers Guide the Tape Smoothly in and Out of Case ■■ Bold Graduations with Black and Red Numbers for Accurate Measuring ■■ H Prefix Denotes Product Blade is Fitted with A Folding Hook Ring Cat. No.

UPC No.

Packaging

Blade Width

Blade Length

HW223 HW223D

037103458865

Boxed

3/8 in

50 ft

None

1.00 lb

037103458902

Boxed

3/8 in

50 ft

None

0.90 lb

HW223ME

037103458889

Boxed

10 mm, 3/8 in

15 m, 50 ft

None

0.90 lb

HW226

037103458940

Boxed

3/8 in

100 ft

None

1.60 lb

HW226D

037103458964

Boxed

3/8 in

100 ft

None

1.60 lb

HW226ME

037103458988

Boxed

10 mm, 3/8 in

30 m, 100 ft

None

1.60 lb

HW227CME

037103459039

Boxed

10 mm, 3/8 in

50 m, 164 ft

None

2.50 lb

Pro Series Long Steel Tape

■■ 3:1 Gear Ratio for Fast Blade Retrieval ■■ Precise, Easy to Read Black and Red Blade Markings ■■ Premium Steel Blade Resists Kinks

Cat. No.

UPC No.

PS100S

037103201447

Packaging

Blade Width

Blade Length

Blade Style

Replacement Blade Cat No.

Product Weight

Shelf Pack Qty.

Carded

3/8 in

100 ft

None

1.05 lb

L O N G

B L A D E S

Home Shop

■■ Vinyl Covered Steel Case ■■ Yellow Clad Blade ■■ 0.005" Thick Blade ■■ Large Easy Action Winding Drum with Friction Washers ■■ Fitted with A Folding Hook Ring

Cat. No.

UPC No.

Packaging

Blade Width

HW50 HW100

Blade Length

037103458827

Boxed

3/8 in

50 ft

037103458841

Boxed

3/8 in

100 ft

Replacement Blade Cat No.

Product Weight

OY50

0.70 lb

OY100

1.25 lb

Blade Style

Shelf Pack Qty.

Hi-Viz® Universal Lightweight

■■ High Impact Polystyrene Case, Hi-Viz® Orange ■■ Yellow Clad Blade 0.005"/0.13mm Thick ■■ Easy Wind Nylon Drum ■■ Easy-To-Read Black and Red Markings ■■ Hook Ring is Retained Neatly in the Contoured Mouth of the Case ■■ Removable Belt Clip ■■ All Tapes Are Carded Blade Width

Blade Length

Blade Style

Replacement Blade Cat No.

Product Weight

Shelf Pack Qty.

037103450685

Carded

3/8 in

50 ft

OY50

0.50 lb

100L

037103451002

Carded

3/8 in

100 ft

OY100

0.95 lb

HV15CME

037103089632

Carded

10 mm, 3/8 in

15 m, 50 ft

RY15CME

0.50 lb

HV30CME

037103089656

Carded

10 mm, 3/8 in

30 m, 100 ft

RY30CME

0.94 lb

UPC No.

M E A S U R I N G

Artisan® Diameter and Tree Tapes

■■ Rugged, Vinyl-Covered Steel Case ■■ Chrome Clad® and Nubian® Blade ■■ 0.008" Thick Blade ■■ Large Easy Winding Drum and Friction Washers ■■ Nylon Rollers Guide the Tape Smoothly in and Out of Case

UPC No.

120TP

037103451101

Packaging

Blade Width

Blade Length

Blade Style

Replacement Blade Cat No.

Product Weight

Shelf Pack Qty.

Boxed

3/8 in

20 ft

B10

None

0.30 lb

C120TP

037103451125

Boxed

3/8 in

20 ft

B10

None

0.55 lb

120P

037103451088

Boxed

3/8 in

240 in

B12

O120P

0.50 lb

C106PM

037103060273

Boxed

10 mm

6.5 m

B15

None

0.60 lb

C106TPM

037103060266

Boxed

10 mm

6.5 m

B15

RC106TPM

0.60 lb

C106PMCAL

037103206480

Boxed

10 mm

6.5 m

CAL Ring

None

0.60 lb

P R O D U C T S

Cat. No.

Packaging

Cat. No.

1051

F I B E R G L A S S

S Y N T H E T I C

T A P E S

Fiberglass & Synthetic Tape Blade Styles C1 yellow clad

C2 YELLOW CLAD

C3 YELLOW CLAD

• 1/2" width only • Yellow clad blade • Black and red markings one side only • Graduated feet and inches to 1/8ths; numbered with feet and instantaneous foot markings in red and inches in black

• 1/2" width only • Yellow clad blade • Black and red markings one side only • Graduated feet to 1/10ths and 1/100ths; numbered with feet in red and 1/10ths of feet in black

• 13mm width only • Yellow clad blade • Black and red markings one side only • Graduated millimeters, numbered at each centimeter with red instantaneous meter number

C4 yellow clad

C5 WHITE CLAD

C6 WHITE CLAD

.8 • 1/2"/13mm width only • Yellow clad blade • Black and red markings on both sides • Two-sided tapeline; top side in feet, inches, and 1/8ths, numbered at each foot with red instantaneous foot numbers; bottom side graduated in millimeters, numbered centimeters with red instantaneous meter number

• White clad blade • 5/8" width • Black and red markings one side only • Graduated feet and inches to 1/8ths, red feet numbers and black inch numbers

• White clad blade • 5/8" width • Black and red markings one side only • Graduated feet to 1/10ths and 1/100ths, red feet numbers and black tenths of feet numbers

C11 YELLOW CLAD & WHITE CLAD

C12 YELLOW CLAD & WHITE CLAD

M E A S U R I N G

P R O D U C T S

C7 yellow clad

1052

• 1/2"/13mm width only • Yellow clad blade • Black and red markings on both sides • Two-sided tapeline; bottom side in metric, graduated in millimeters, numbered in centimeters, with red instantaneous meter number; top side graduated feet to 1/10ths and 1/100ths, numbered with feet in red and 10ths of feet in blade

• 3/4" width only • White on top, yellow on bottom • Black and red markings both sides • Two-sided tapeline; top side feet and inches, graduated to 8ths; bottom decimal feet

• 3/4" width only • White on top, yellow on bottom • Black and red markings both sides • Two-sided tapeline; top side graduated in millimeters, numbered centimeters with meters, bottom in feet and inches

F I B E R G L A S S

S Y N T H E T I C

T A P E S

Pro Series Fiberglass Tapes

■■ Patents Pending ■■ Interchangeable End Hooks for User Convenience ■■ Ring End Hook Snaps Onto Stake for 1-Person Measurements ■■ Standard Folding End Hook for General Measuring Needs ■■ Appraiser's Hook Attaches to Oversized Objects Such as Downspouts ■■ 3-To-1 Rewind for Fast Blade Retraction ■■ 3/4" Blade is More Durable; Large Numbers Are Easy to Read ■■ 2-Sided Blade, Feet & Inches on Top, Feet to 10ths and 100ths on Bottom ■■ 62 Fiberglass Strands and Double-PVC Coating for Durability and Strength ■■ Cushion Grips on Handle and Frame Arms for Comfort Cat. No.

UPC No.

Packaging

Blade Width

Blade Length

Blade Style

Product Weight

Shelf Pack Qty.

PSFE100

037103224811

Carded

3/4 in

100 ft

C11

2.55 lb

PSFE200

037103224828

Carded

3/4 in

200 ft

C11

3.79 lb

PSFE300

037103224804

Carded

3/4 in

300 ft

C11

4.77 lb

PSFM030CME

037103233981

Carded

19 mm, 3/4 in

30 m, 100 ft

C12

2.55 lb

PSFM060CME

037103233998

Carded

19 mm, 3/4 in

60 m, 200 ft

C12

3.79 lb

PSFM100CME

037103234001

Carded

19 mm, 3/4 in

100 m, 328 ft

C12

4.77 lb

PSFE3PCKIT*

037103231635

Carded

None

0.05 lb

* 3 Piece Replacement End Hook Kit

Fiberglass Tapes

■■ Open Four-Arm Frame Design Protects Blade, Does Not Trap Dirt in Case ■■ Lightweight But Strong Case is Easy to Handle and Rewind ■■ Two-Material Grip is Comfortable to Use ■■ Hi-Viz® Orange Case is Easy to Find on the Job Site ■■ Folding End Hook for True-Zero Measurements ■■ Yellow Clad Fiberglass Blade Impervious to Moisture UPC No.

Packaging

Blade Width

Blade Length

Blade Style

Product Weight

Shelf Pack Qty.

FE050

037103224033

Carded

1/2 in

50 ft

1.38 lb

FE050D

037103224040

Carded

1/2 in

50 ft

1.38 lb

FE100

037103224057

Carded

1/2 in

100 ft

1.65 lb

FE100D

037103224026

Carded

1/2 in

100 ft

1.65 lb

FE150

037103224071

Carded

1/2 in

150 ft

1.82 lb

FE150D

037103224088

Carded

1/2 in

150 ft

1.82 lb

037103224095

Carded

1/2 in

200 ft

2.00 lb

037103224064

Carded

1/2 in

200 ft

2.00 lb

FE300

037103224118

Carded

1/2 in

300 ft

2.80 lb

FE300D

037103224125

Carded

1/2 in

300 ft

3.00 lb

FM015CME

037103224132

Carded

1/2 in

15 m, 50 ft

1.30 lb

FM030CM

037103224101

Carded

13 mm

30 m

1.56 lb

FM030CME

037103224156

Carded

13 mm, 1/2 in

30 m, 100 ft

1.58 lb

FM030DM

037103224163

Carded

13 mm, 1/2 in

30 m, 100 ft

1.58 lb

FM050CM

037103224170

Carded

13 mm

50 m

1.75 lb

FM050CME

037103224149

Carded

13 mm, 1/2 in

50 m, 164 ft

1.75 lb

FM060CME

037103224194

Carded

13 mm, 1/2 in

60 m, 200 ft

2.00 lb

FM100CME

037103224187

Carded

13 mm, 1/2 in

100 m, 328 ft

3.25 lb

P R O D U C T S

FE200 FE200D

M E A S U R I N G

Cat. No.

1053

F I B E R G L A S S

S Y N T H E T I C

T A P E S

HI-VIZ® Linear

■■ Lightweight High Impact ABS Case ■■ Durable 1/2" Wide Fiberglass Tape is Encapsulated in Flexible Plastic ■■ Non-Conductive, Easy-To-Read Black, Red Markings, Yellow Background ■■ Lightweight High Impact Abs Winding Drum for Smooth Tape Recovery ■■ Blaze Orange Case Cat. No.

UPC No.

Packaging

Blade Width

Blade Length

Blade Style

Product Weight

Shelf Pack Qty.

1707

037103454669

Carded

1/2 in

150 ft

1.65 lb

703

037103453525

Carded

1/2 in

50 ft

0.90 lb

703D

037103453549

Carded

1/2 in

50 ft

0.80 lb

706D

037103453587

Carded

1/2 in

100 ft

1.30 lb

706L

037103453563

Carded

1/2 in

100 ft

1.20 lb

Hi Line® Tapes

M E A S U R I N G

P R O D U C T S

■■ Synthetic Fiber Blade is Non-Conductive ■■ Steel Case with Vinyl Covering

1054

Cat. No.

UPC No.

Packaging

Blade Width

Blade Length

Blade Style

Product Weight

Shelf Pack Qty.

HD403

037103202369

Carded

5/8 in

50 ft

1.00 lb

HD403D

037103202352

Carded

5/8 in

50 ft

1.00 lb

HD406

037103202338

Carded

5/8 in

100 ft

1.40 lb

HD406D

037103202321

Carded

5/8 in

100 ft

1.40 lb

HDH406

037103202376

Carded

5/8 in

100 ft

1.40 lb

HDH406D

037103202383

Carded

5/8 in

100 ft

1.40 lb

O I L

G A U G I N G

T A P E S

P L U M B

B O B S

Oil Gauging Tapes & Plumb Bobs Information Plumb bobs are not supplied with tapes. The last part of the catalog number denotes the style of the bob the tape is made to accept. Lufkin oil gauging tapes and plumb bobs are manufactured to meet the applicable specifications outlined in the National Institute of Standards and Technology Handbook 44, 2011 Edition, Section 5.52. Manufacturing tolerances for final measurement comply with API MPMS Second Edition, August 2005, Chapter 3, Section 1A, Appendix 1.2. 1. Never gauge a tank during an electrical storm. 2. Ground yourself and your tools by touching the tank ladder before climbing the ladder. Do not wear gloves when grounding yourself. Gloves prevent proper grounding. 3. Ground yourself before opening the gauging hatch by touching the handrail or platform (without gloves on). During and after removal of the gauging cover, stand so that the gas will not be inhaled. Wear a gas mask if toxic gases are present. 4. Always maintain contact between the gauging tape and the edge of the hatch from the moment the gauge bob enters the hatch until the gauge bob is removed from the hatch.

OIL GAUGING TAPES • Chrome Clad® for dark (heavy oils) • Nubian® for light (clear oils) • “Double Duty” oil gauging tapes with both Chrome Clad® and Nubian® (black) for dark (heavy) and light (clear) oils • Made of heavy gauge 1/2" (13mm) x .012" (0.3mm) steel • Snap-swivel hook on front end of tape for a plumb bob • Two arm frames for shorter lengths; four arm frames for 30m/100' and greater • Large drums and winding handles for quick and easy rewinding • Handle folds over for storage and to lock line at extended position

It takes more than a quality gauging tape, it takes a smart user. Every time you use a Lufkin oil gauging tape, follow proper grounding techniques. Ground your body. Ground your gear. And always use a grounding strap. Lufkin oil gauging tapes come complete with a grounding strap and an ESD handle, and are in full compliance with all current and proposed American Petroleum Institute standards. Achieve a solid ground every time. Use Lufkin oil gauging tapes, and follow proper grounding procedures.

How to Measure an Inage Plumb Bob

How to Measure an OUTage Plumb Bob

P R O D U C T S

Tapes which have the swivel snap fitted so as to accommodate the 5871/2 plumb bob are known as outage tapes. When the 5871/2 plumb bob is assembled to the tape line the zero point is at the intersection of the swivel snap and the plumb bob. When using outage gauging tapes the tape is lowered into the tank until the plumb bob just penetrates the liquid. The tape is then rewound and the liquid level is read right off the plumb bob. The reading on the plumb bob is added to the tape reading giving the total outage (how much liquid has been removed from the tank).

M E A S U R I N G

Tapes cut and fitted with the swivel snap to be used with the 588 and 590 plumb-bobs are known as inage gauging tapes. When the plumb bobs are assembled to the swivel snap the zero point is at the bottom of the plumb bob. When being used, the plumb bob and tape are lowered until the bob contacts the bottom of the tank. When the tape is reeled in, the liquid line is read on the tape line itself, thereby showing you the contents of the tank.

1055

O I L

G A U G I N G

T A P E S

P L U M B

B O B S

Oil Gauging Tape Blade Styles D1 CHROME cladÂŽ & NUBIANÂŽ

D2 CHROME cladÂŽ & NUBIANÂŽ

D3 CHROME cladÂŽ & NUBIANÂŽ 3

2 52

â&#x20AC;˘ 1/2" width only â&#x20AC;˘ Markings one side only â&#x20AC;˘ Graduated instantaneous feet and inches to 1/8ths

D4 CHROME cladÂŽ & STAINLESS STEEL

â&#x20AC;˘ 1/2" width only â&#x20AC;˘ Markings one side only â&#x20AC;˘ Graduated in feet to 1/10ths and 1/100ths of an foot; reads right to left

D5 NUBIAN

1F 3 40

3 30

3 20

3 10

3 00

2 90

2 80

2 70

2 60

width only Â&#x2021;â&#x20AC;˘ 1/2" ZLGWK RQO\ Â&#x2021;â&#x20AC;˘ NubianÂŽ 1XELDQÂ&#x160; blade EODGH â&#x20AC;˘ 1/2"/13mm width one side only Â&#x2021;â&#x20AC;˘ Markings 0DUNLQJV RQH VLGH RQO\ â&#x20AC;˘ Chrome CladÂŽ blade â&#x20AC;˘ Graduated feet and inches to 1/8ths; instantaneous â&#x20AC;˘ Black and red markings on metric side Â&#x2021; foot *UDGXDWHG IHHW DQG LQFKHV WR WKV LQVWDQWDQHRXV readings â&#x20AC;˘ Metric - graduated meters to millimeters; numbered IRRW UHDGLQJV right to left in meters and millimeters â&#x20AC;˘ English side - graduated feet and inches to 1/8ths; numbered right to left

M E A S U R I N G

P R O D U C T S

D7 NUBIANÂŽ

1056

â&#x20AC;˘ 1/2" width only â&#x20AC;˘ NubianÂŽ blade â&#x20AC;˘ Graduated in meters; numbered in millimeters

D6 CHROME cladÂŽ

3 50

â&#x20AC;˘ 1/2" width only â&#x20AC;˘ Markings one side only â&#x20AC;˘ Graduated feet and inches to 1/8ths; instantaneous foot readings

â&#x20AC;˘ 1/2"/13mm width only â&#x20AC;˘ Markings both sides â&#x20AC;˘ Graduated in millimeters on one side; other side instantaneous feet and inches to 1/8ths

ÂŽ D5 Nubian ÂŽ 1-

O I L

G A U G I N G

T A P E S

P L U M B

B O B S

Atlas® Chrome Clad® / Nubian® Double Duty

■■ Recessed Beneath Multiple Layers of Nickel and Chrome Electroplating ■■ Provides Greater Resistance to Wear and Corrosion ■■ All Tapes Read Right to Left ■■ Heavy-Duty Frame Designed for Years of Rugged Use ■■ All Frames Include a Grounding Strap ■■ Plumb Bob Must be Ordered Separately

Packaging

Bob Cut

Blade Width

Blade Length

Blade Style

Replacement Blade Cat No.

Product Weight

Shelf Pack Qty.

037103459527

Boxed

590

1/2 in

18 ft

OCN129012SF5

1.60 lb

037103459534

Boxed

590

1/2 in

25 ft

OCN1290SF590

1.60 lb

590

13 mm, 1/2 in

8 m, 26 ft

None

1.80 lb

Cat. No.

UPC No.

CN129012SF5 CN1290SF590 CN1290SME

037103001696

Boxed

CN1291SF590

037103459541

Boxed

590

1/2 in

33 ft

OCN1291SF590

1.90 lb

CN1293SF5871

037103459763

Boxed

5871/2

1/2 in

50 ft

None

2.30 lb

CN1293SF590

037103459558

Boxed

590

1/2 in

50 ft

OCN1293SF590

1.60 lb

CN1293SDF590

037103459596

Boxed

590

1/2 in

50 ft

OCN1293SDF59

2.20 lb

15 m, 50 ft

OCN1293SMEF5

2.30 lb

CN1293SMEF59

037103459602

Boxed

590

13 mm, 1/2 in

CN1294SF5871

037103459770

Boxed

5871/2

1/2 in

66 ft

None

2.70 lb

CN1294SF590

037103459565

Boxed

590

1/2 in

66 ft

OCN1294SF590

2.60 lb

20 m, 66 ft

OCN1294SMEF5

2.60 lb

037103459619

Boxed

590

CN1295SME590

037103122124

Boxed

590

13 mm, 1/2 in

23 m, 75 ft

OCN1295SME590

2.88 lb

CN1295SF590

037103459572

Boxed

590

1/2 in

75 ft

OCN1295SF590

2.90 lb

23 m, 75 ft

None

2.70 lb

037103440815

Boxed

5871/2

CN1296SF590

037103459589

Boxed

590

1/2 in

100 ft

OCN1296SF590

3.56 lb

CN1296SMEF59

037103459626

Boxed

590

13 mm, 1/2 in

30 m, 100 ft

OCN1296SMEF5

3.60 lb

CN1298SME590

037103104243

Boxed

590

13 mm, 1/2 in

38 m, 125 ft

None

4.20 lb

M E A S U R I N G

CN1295SME

13 mm, 1/2 in

CN1294SMEF59

13 mm, 1/2 in

P R O D U C T S

1057

O I L

G A U G I N G

T A P E S

P L U M B

B O B S

Atlas® Chrome Clad®

Cat. No.

UPC No.

Packaging

Bob Cut

Blade Width

Blade Length

Blade Style

Replacement Blade Cat No.

Product Weight

Shelf Pack Qty.

C129012SF

037103454065

Boxed

590

1/2 in

18 ft

OC129012SF59

1.60 lb

C1290SF590

037103454102

Boxed

590

1/2 in

25 ft

OC1290SF590

1.80 lb

C1291SF590

037103454140

Boxed

590

1/2 in

33 ft

OC1291SF590

1.90 lb

C1293SF590

037103454256

Boxed

590

1/2 in

50 ft

OC1293SF590

2.30 lb

C2910MME590

037103063373

Boxed

590GM

13 mm, 1/2 in

10 m, 33 ft

OC2910MME590

1.95 lb

C2915MME590

037103091406

Boxed

590GM

13 mm, 1/2 in

15 m, 50 ft

None

2.35 lb

C2920MME590

037103003386

Boxed

590GM

13 mm, 1/2 in

20 m, 66 ft

None

2.70 lb

C2920MME150M

037103047168

Boxed

150 mm

13 mm, 1/2 in

20 m, 66 ft

None

2.50 lb

Blade Length

Blade Style

Replacement Blade Cat No.

M E A S U R I N G

P R O D U C T S

Atlas® Nubian®

■■ Ideal for Gauging Clear Oils ■■ Etched Background ■■ Blade Protected By Flowed-On Epoxy Coating ■■ Raised Bright Steel Markings Are Clearly Legible ■■ All Tapes Read Right to Left, Except 3/8" X 50' Reads Left to Right ■■ Heavy-Duty Frame Designed for Years of Rugged Use ■■ All Frames Include a Grounding Strap ■■ Plumb Bob Must be Ordered Separately Cat. No.

UPC No.

1290SF590 1293SF590 1293SM590

Shelf Pack Qty.

O1290SF590

1.70 lb

O1293SF590

2.30 lb

None

1.90 lb

Blade Style

Replacement Blade Cat No.

Product Weight

Shelf Pack Qty.

Bob Cut

Blade Width

037103454089

Boxed

590

1/2 in

25 ft

037103454201

Boxed

590

1/2 in

50 ft

037103441676

Boxed

590

13 mm

15 m

Blade Length

Atlas® Stainless Steel®

■■ Designed for Use in Highly Corrosive Solutions ■■ Stainless Steel Blade Resists Corrosion ■■ Heavy-Duty Frame Designed for Years of Rugged Use ■■ All Frames Include a Grounding Strap ■■ Plumb Bob Must be Ordered Separately ■■ Recommended Plumb Bob: S590 ■■ Blade Style: D4

Cat. No.

1058

Product Weight

Packaging

UPC No.

Packaging

Bob Cut

Blade Width

S1291F590

037103440839

Boxed

590

1/2 in

33 ft

OS1291F590

1.50 lb

S1293F590

037103456823

Boxed

590

1/2 in

50 ft

OS1293F590

2.00 lb

O I L

■■ For Use in Heavy Oils ■■ Cylindrical Shaped ■■ Tapered Point Tip

G A U G I N G

T A P E S

P L U M B

B O B S

Inage Oil Gauging Plumb Bobs

Cat. No.

UPC No.

Packaging

Description

Length

Product Weight

Shelf Pack Qty.

590

037103453204

Boxed

20 oz Plumb Bob, Solid Brass Inage, Cylindrical Shape

6.75 in

1.40 lb

590G

037103453235

Boxed

20 oz Plumb Bob, Solid Brass, Graduated in Inches, Blunt Point

6.75 in

1.40 lb

590GM

037103453242

Boxed

20 oz Plumb Bob, Solid Brass, Graduated in Millimeters and Centimeters

6.75 in

1.40 lb

590GME

037103442895

Boxed

20 oz Plumb Bob, Solid Brass, Metric and English

6.75 in

1.40 lb

S590

037103460134

Boxed

20 oz Plumb Bob, Stainless Steel, Cylindrical Shape

6.75 in

1.20 lb

Outage Oil Gauging Plumb Bob

■■ Square Shaped Solid Brass Bob ■■ Eye Milled From Solid Brass Block (Not Removable) ■■ Zero Falls Inside Top of Hook Eye

UPC No.

Packaging

Description

Length

Product Weight

Shelf Pack Qty.

58712

037103453181

Boxed

20 oz Plumb Bob, Solid Brass Outage

6 in

1.27 lb

150MM

037103105875

Boxed

570g Plumb Bob, Brass Outage

152 mm

1.27 lb

Cat. No.

M E A S U R I N G P R O D U C T S

1059

S U R V E Y I N G

T A P E S

Steel Tape Line Accuracy Lufkin® steel tapes are made to government standards. Our bench standards for the United States are certified accurate by the United States Department of Commerce, N.I.S.T. Tapes for Canada are made to Canadian government standards. Temperature standard for steel tapes is 68°F, which equals 20°C. Coefficient of expansion of steel tapes is 0.00000645' per degree F; 0.0000116' per degree C. This amounts to 0.000645' or 0.00774" per degree F. on a 100' tape, and one-half as much on a 50' tape. As a figure that is reasonably accurate and also easy to handle, it is customary on very long runs of pipe to allow 1/10" per 100' for each 10° change.

The above illustration shows, for a 100' tape, the actual length variations of temperature within the range of 20° below to 120° above zero °F. The terminal graduation on the lower edge is at 68°, this being standard temperature. Standard tension for steel tapes 25 to 100' long (10 to 30m) supported entire length on a horizontal, flat surface, is 10 pounds (4.5 kg.); for all tapes over 100', 20lbs., (9kg.). For steel tapes suspended horizontally and supported only at ends, there can be no set or standard tension for accuracy because of weight and other variations. The following listings are averages of many tests made by the N.I.S.T. of Lufkin® steel tapes supported throughout and supported ends only. These averages are taken from the experience of tests and should be used as a working basis only, and not to replace the test of any individual tape. All tape lengths are 100'.

Tape Width (in)

Kind of Tape

P R O D U C T S M E A S U R I N G

Supported Ends Only (lbs)

1/4

Chain Tapes

1/4

Engineer's (0.12")

1/4

Engineer's Extra Heavy Tapes

3/8 & 1/2

Standard Weight Tapes

NOTE: Temperature and tension need to be taken into account only on precise work. We recommend a government test of tapes to be used for such work or for use as master standard. The N.I.S.T. and Lufkin® have a charge for this test.

Steel Tape Blade Styles E1 CHROME clad® & YELLOW CLAD

1060

Tension of Accuracy Thru-out (lbs)

• 1/4" and 3/8" widths • Chrome Clad® and yellow clad blade • Markings on one side only • Graduated to feet, 1/10ths and 1/100ths with a blank space at last end

E4 NY-clad® YELLOW

E2 CHROME clad®

E3 CHROME clad® & YELLOW CLAD

• 1/4"/6mm width only • Chrome Clad® blade • Markings on both sides • Graduated millimeters one side • Graduated feet, inches and 1/8ths other side

• 1/4" and 3/8" widths • Chrome Clad® blade • Yellow clad available in 1/4" only • Black markings one side only • Graduated feet and inches to 1/8ths with instantaneous readings • 16" centers indicated by a diamond symbol on 3/8" width only

E5 NY-clad® YELLOW

E11 CHROME clad® 0.

• 1/2" width only • Nylon-clad yellow blade • Black and red markings one side only • Graduated feet and inches to 1/8ths with instantaneous readings • Numbered with feet and instantaneous foot markings in red and inches in black

• 1/2” width only • Nylon-clad yellow blade • Black and red markings one side only • Graduated feet to 1/10ths and 1/100ths • Numbered with feet in red and 1/10ths in black

200

• 6mm width • Black and red markings one side only • Graduated meters to millimeters • Red meter numbers and black millimeter numbers at each decimeter

S U R V E Y I N G

E12 CHROME clad® 8 9 0.

E13 CHROME clad®

200

• 1/4" width • Black and red markings one side; black markings other side • Graduated meters to millimeters one side • Red meter numbers and black millimeter numbers at each decimeter • Graduated feet to 1/10ths and 1/100ths other side • Numbered feet and 1/10ths black markings only

T A P E S

200

• 1/4" width • Black and red markings both sides • Graduated meters to millimeters one side • Red meter numbers and black millimeter numbers at each decimeter • Graduated feet and inches to 1/8ths other side with red feet numbers and black inch numbers

Super Hi-Way® Nubian®

■■ Nominal Thickness 0.017" ■■ Easy-To-Read Raised Graduations ■■ Lines Have A Blank Space at Each End ■■ Extra Foot Before Zero Graduated Right to Left to 1/10ths and 1/100ths ■■ Balance Marked Every Foot Except Last Foot of Each 100' Length, 100ths

Packaging

Blade Width

Blade Length

Blade Style

Replacement Blade Cat No.

Product Weight

037103455437

Boxed

5/16 in

100 ft

None

2.20 lb

O9200B

037103101266

Boxed

5/16 in

200 ft

None

3.60 lb

O9300B

037103455598

Boxed

5/16 in

300 ft

None

5.90 lb

Cat. No.

UPC No.

O9100B

Shelf Pack Qty.

M E A S U R I N G

Blade Width

Blade Length

Blade Style

Replacement Blade Cat No.

Product Weight

Shelf Pack Qty.

037103236876

Carded

1/2 in

100 ft

None

2.02 lb

PS1806DN

037103236883

Carded

1/2 in

100 ft

None

1.98 lb

PS1808N

037103236890

Carded

1/2 in

200 ft

None

3.04 lb

UPC No.

PS1806N

PS1808DN

037103236906

Carded

1/2 in

200 ft

None

3.14 lb

PS1809DN

037103236913

Carded

1/2 in

300 ft

None

4.11 lb

P R O D U C T S

Packaging

Cat. No.

Pro Series Ny-Clad® Steel Tapes

■■ Durable Nylon Coating on Blade Resists Wear Under Extreme Conditions ■■ Super Fast 3-To-1 Blade Retraction Saves Time in the Field ■■ Steel Blade Will Not Stretch Under Normal Use

1061

S U R V E Y I N G

T A P E S

Derrick

■■ Nominal Blade Thickness 0.019" ■■ Extra Large Winding Drum Provides Rapid Line Recovery ■■ Special Hook Ring with Ribbed Face at Zero ■■ Leather Thong is Provided to Use Through Eye at Rear ■■ Chrome Clad® Blade

Packaging

Blade Width

Blade Length

Blade Style

Replacement Blade Cat No.

Product Weight

Shelf Pack Qty.

037103454713

Boxed

1/4 in

100 ft

OC2276D

2.90 lb

C2276ME

037103454737

Boxed

1/4 in, 6 mm

100 ft, 30 m

OC2276ME

3.00 lb

CD2730DMM

037103063700

Boxed

6 mm

30 m

E12

OCD2730DMM

2.75 lb

CD2750MME

037103063687

Boxed

1/4 in, 6 mm

164 ft, 50 m

E13

OCD2750MME

3.60 lb

Cat. No.

UPC No.

C2276D

M E A S U R I N G

P R O D U C T S

Western®

1062

■■ Thickness 0.019" and 1/4"/6mm Wide Blade ■■ Blank Space at Each End ■■ Turning Handle Locks Line at Any Position ■■ Reel is Nickel-Plated, 4-Arm with Rollers in Each Arm for Smooth Winding ■■ Oversize Drum with Long, One-Piece Winding Handle, Quick Return of Line ■■ Riveted Clips for Holding Thongs ■■ Reel Available Separately ■■ Y1676D is Yellow Clad, Thickness 0.16"

Packaging

Blade Width

Blade Length

Blade Style

Replacement Blade Cat No.

Product Weight

Shelf Pack Qty.

037103454584

Boxed

1/4 in

100 ft

OC1676D

3.00 lb

037103459435

Boxed

1/4 in

100 ft

None

2.40 lb

Cat. No.

UPC No.

C1676D Y1676D

S U R V E Y I N G

T A P E S

Chrome Clad®

■■ 3/8"/10mm Wide and 0.008" Thick ■■ Long, Easy-Action Winding Handle That Locks Line in Any Position ■■ Reel is Nickel Plated, 4-Arm with Rollers in Each Arm for Smooth Winding ■■ Instantaneous Reading ■■ Zero Falls at Outer End of Ring ■■ Reel Available Separately

Cat. No.

UPC No.

C1286

037103454003

Packaging

Blade Width

Blade Length

Blade Style

Replacement Blade Cat No.

Product Weight

Shelf Pack Qty.

Boxed

3/8 in

100 ft

2.20 lb

C1286D

037103454027

Boxed

3/8 in

100 ft

OC1286D

2.20 lb

C1288

037103454041

Boxed

3/8 in

200 ft

OC1288

3.19 lb

C1288BLK

037103124128

Boxed

3/8 in

200 ft

3.19 lb

Peerless

■■ Designed for Engineers and Surveyors Who Prefer a 4-Arm Reel ■■ Chrome Clad® and Yellow Clad Blade ■■ Blade 1/4"/6mm Wide and 0.016"/0.4mm Thick ■■ Subdivided Line Removes Easily From Reel ■■ Long, Easy-Action Winding Handle That Locks Line in Any Position ■■ Reel is Nickel Plated, 4-Arm with Rollers in Each Arm for Smooth Winding ■■ Open Design Construction Aids in Drying Line and Clearing Out Dirt ■■ Pair of 580 Finger Rings and a 579 Engineer’s Conversion Rule are Furnished with Tape or Replacement Line ■■ Reel Available Separately Blade Length

Blade Style

Replacement Blade Cat No.

Product Weight

Shelf Pack Qty.

037103453822

Boxed

1/4 in

100 ft

OC1276

2.40 lb

C1278

037103453860

Boxed

1/4 in

200 ft

OC1278

3.70 lb

C1276D

037103453846

Boxed

1/4 in

100 ft

OC1276D

2.40 lb

C1278D

037103453884

Boxed

1/4 in

200 ft

OC1278D

3.70 lb

C2730MM

037103060297

Boxed

6 mm

30 m

E11

OC2730MM

2.40 lb

C2730DMM

037103060204

Boxed

1/4 in, 6 mm

100 ft, 30 m

E12

OC2730DMM

2.50 lb

C2730MME

037103060280

Boxed

1/4 in, 6 mm

100 ft, 30 m

E13

OC2730MME

2.40 lb

C2750DMM

037103060181

Boxed

1/4 in, 6 mm

164 ft, 50 m

E12

OC2750DMM

3.44 lb

C2750MME

037103001351

Boxed

1/4 in, 6 mm

164 ft, 50 m

E13

None

3.36 lb

Y1276

037103457790

Boxed

1/4 in

100 ft

RY1276

2.00 lb

Y1278

037103457837

Boxed

1/4 in

200 ft

RY1278

2.80 lb

Y1279

037103457875

Boxed

1/4 in

300 ft

RY1279

4.10 lb

Y1276D

037103457806

Boxed

1/4 in

100 ft

RY1276D

2.10 lb

C1276

Y1278D

037103457844

Boxed

1/4 in

200 ft

RY1278D

3.05 lb

Y1279D

037103457882

Boxed

1/4 in

300 ft

None

4.10 lb

P R O D U C T S

Blade Width

UPC No.

M E A S U R I N G

Packaging

Cat. No.

1063

R E E L S

F R A M E S

81 and 91 Series Reels for Chrome Clad® and Gauging Tapes

■■ For 3/8" 10mm and 1/2"/13mm Widths - Chrome Clad and Gauging Tapes ■■ Chrome 2 Arm Frame ■■ Not All Replacement Parts Sold Separately

Cat. No.

UPC No.

9150L

037103450968

Packaging

Blade Width

Blade Length

Product Weight

Shelf Pack Qty.

Boxed

1/4 in

200 ft

1.20 lb

Shelf Pack Qty.

31 Series Reel for Over 100' Lengths

■■ For Over 100' Lengths ■■ Chrome 4 Arm Frame ■■ Not All Replacement Parts Sold Separately

UPC No.

Packaging

Blade Width

Blade Length

Product Weight

31200

714994817529

Boxed

5/16 in

300 ft

3.00 lb

31300

037103450548

Boxed

1/4 in

100 ft

3.10 lb

M E A S U R I N G

P R O D U C T S

Cat. No.

1064

11 Series Reel for Peerless Chrome Clad® Tapes

■■ For 1/4"/6mm Wide - 100' and 200' Lengths, Fits Peerless Chrome Clad Tapes ■■ Chrome 4 Arm Frame ■■ Not All Replacement Parts Sold Separately

Cat. No.

UPC No.

Packaging

Blade Width

Blade Length

Product Weight

11100

037103450272

Boxed

1/2 in

50 ft

1.30 lb

Shelf Pack Qty.

11200

037103450289

Boxed

5/16 in

200 ft

1.40 lb

Derrick Replacement Reel

■■ For 1/4"/6mm Wide - 150 and 200' Lengths ■■ Fits Western Chrome Clad® Tapes

Cat. No.

UPC No.

12200

037103450340

Packaging

Fits Product Number

Blade Width

Blade Length

Style of Case or Reel

Product Weight

Shelf Pack Qty.

Boxed

Western® Chrome Clad® Tapes

1/4 in

200 ft

4 Arm

1.85 lb

R E E L S

F R A M E S

Western® Replacement Reel

■■ For 1/4" or 5/16" X 100' Lengths of Steel Tapes Only ■■ Reel is Nickel-Plated, 2-Arm with Rollers in Each Arm for Smooth Winding ■■ Oversize Drum with Long, One-Piece Winding Handle, Quick Return of Line Cat. No.

UPC No.

31100

037103450517

Packaging

Fits Product Number

Blade Width

Blade Length

Style of Case or Reel

Product Weight

Shelf Pack Qty.

Boxed

Fits 100 ft Tapes Only

1/4 in

100 ft

2 Arm

1.40 lb

Engineering and Surveying Replacement Reel

■■ For 1/2" X 75' Chrome Clad® and Gauging Tapes ■■ Reel is Nickel-Plated, 4-Arm with Rollers in Each Arm for Smooth Winding ■■ Oversize Drum with Long, One-Piece Winding Handle, Quick Return of Line

Cat. No.

UPC No.

9175

037103450975

Packaging

Fits Product Number

Blade Width

Blade Length

Style of Case or Reel

Product Weight

Shelf Pack Qty.

Boxed

Chrome Clad and Gauging Tapes

1/2 in

75 ft

4 Arm

1.30 lb

Detachable hook

■■ Easily Attaches and Detaches From Standard Ring Tape Line ■■ Heavily Nickel Plated, Zinc Hook ■■ Serrated Face Grips Firmly and Releases Easily ■■ On Tapes Measuring From Outer End of Ring, Zero Falls at Inside of Hook ■■ Can Be Used on Lines 3/8"/10mm Wider UPC No.

552

037103452832

Product Weight

Shelf Pack Qty.

Boxed

0.04 lb

Packaging

Product Weight

Shelf Pack Qty.

Boxed

0.20 lb

Tape Clamps Handle

■■ Used for Quickly and Positively Gripping a Steel Tape at Any Point ■■ Applies Light or Heavy Tension ■■ Clamp is Applied and Removed By Simply Operating the Handle ■■ Used Properly, It Will Not Damage a Tape in Any Way ■■ Made of Chrome-Plated Zinc Alloy

Cat. No.

UPC No.

584

037103453143

P R O D U C T S

Packaging

M E A S U R I N G

Cat. No.

1065

M I S C E L L A N E O U S

M E A S U R I N G

Tape Tension Handles

■■ Use with Steel Tapes for Extremely Accurate Measurements ■■ Rustproof Brass Construction with Black-Filled Etched Graduations ■■ Graduations Begin at Snap End, Easy-To-Read When Tension is Applied ■■ Capacity of 30 Lb X 1/2 Lb and 25Kg X 25Kg Cat. No.

UPC No.

586

037103453150

Packaging

Product Weight

Shelf Pack Qty.

Boxed

0.60 lb

Red End® Extension Folding Wood Rules

M E A S U R I N G

P R O D U C T S

■■ Slide Rule Runs Under Friction in T-Slot ■■ Stops at Each End to Prevents Slide From Falling Out ■■ Marked Both Sides and Both Edges ■■ Graduated to 1/16ths of An Inch ■■ 16" Stud Centers in Red, Regular Outside Markings ■■ TX46N has Two 6" Extension Slides; an Extension is ready for use on the First Section ■■ HX46N has a Hook; Zero Falls Inside of Hook, for Distance Measuring ■■ X46FN has Flat, Inside Markings; Numbering Begins on Inside of Rule

1066

Cat. No.

UPC No.

TX46N

037103265555

Packaging

Blade Width

Blade Length

Product Weight

Shelf Pack Qty.

Boxed

5/8 in

6 ft

0.35 lb

HX46N

037103265746

Boxed

5/8 in

6 ft

0.39 lb

X48N

037103265708

Boxed

5/8 in

8 ft

0.50 lb

X46FN

037103265685

Boxed

5/8 in

6 ft

0.35 lb

Red End® Folding Wood Rule

■■ Marked Both Sides, Both Edges ■■ 066FN has Inside Markings; Numbering Begins on Inside of Rule; Measurement Lies Close to the Work ■■ 062CMEN is Marked Both Sides, Reading Left to Right on Both Sides; Rule is Graduated in millimeters with centimeters and meter markings on metric side; English Side is Marked to 1/16ths Cat. No.

UPC No.

Packaging

Blade Width

Blade Length

Product Weight

Shelf Pack Qty.

T066N 066FN

037103265609

Boxed

5/8 in

6 ft

0.34 lb

037103265531

Boxed

5/8 in

6 ft

0.34 lb

062CMEN

037103265586

Boxed

5/8 in

6 ft

0.39 lb

F O L D I N G

R U L E S

Red End® - Two Way Folding Wood Rule

■■ For Measuring Left to Right, Right to Left ■■ Marked Both Sides ■■ Graduated in Feet, Inches and 1/16ths on Both Sides and Both Edges ■■ Flat Inside Markings Lie Close to the Work

Cat. No.

UPC No.

966N

037103265562

Packaging

Blade Width

Blade Length

Product Weight

Shelf Pack Qty.

Boxed

5/8 in

6 ft

0.34 lb

Red End® Engineer's Folding Wood Rule

■■ Graduated in Feet, 1/10ths and 1/100ths of Feet ■■ Red Foot Figures ■■ Regular Outside Markings in Feet, Inches and 1/16ths ■■ Decimal Points on Engineer’s Scale Prevent Reading Errors

Cat. No.

UPC No.

Packaging

Blade Width

Blade Length

Product Weight

Shelf Pack Qty.

1066DN

037103265517

Boxed

5/8 in

6 ft

0.35 lb

1066DMN

037103265692

Boxed

16 mm, 5/8 in

2 m, 6.5 ft

0.36 lb

Red End® Plumber's Folding Wood Rule

UPC No.

626LN

037103265753

Packaging

Blade Width

Blade Length

Product Weight

Shelf Pack Qty.

Boxed

5/8 in

6 ft

0.25 lb

P R O D U C T S

Cat. No.

M E A S U R I N G

■■ For Working with 45° Elbows to Eliminate Figuring and Chance of Error ■■ Graduated One Side, in Black, Inches to 1/16ths Both Edges ■■ Other Side in Red, 45° Scale Inches to 1/16ths Upper Edge Only ■■ Turning Rule From Black to Red Gives Corresponding 45° Elbow Dimension

1067

F O L D I N G

R U L E S

Red End® Brick Mason's Folding Wood Rule

■■ Used By Bricklayers ■■ Graduated Vertical Inches to 1/16ths, Both Edges ■■ Brick Mason Scale on Inside, Red Course Counters Numbered Consecutively ■■ Regular Outside Markings in Black

Cat. No.

UPC No.

Packaging

Blade Width

Blade Length

Product Weight

T636N

037103265630

Boxed

5/8 in

6 ft

0.30 lb

Shelf Pack Qty.

T656N

037103265647

Boxed

5/8 in

6 ft

0.35 lb

Red End® Modular Spacing Folding Wood Rule

■■ All Sections Have Square Ends ■■ Every Joint Opens on Even Number ■■ Inside Marked with 6 Scales in a 16" Module ■■ Outside is Graduated on Both Edges to 1/16ths ■■ The First End Section is a Short Section ■■ Permits Butting the Rule on the First 16" Module

UPC No.

646LN

037103265616

Packaging

Blade Width

Blade Length

Product Weight

Shelf Pack Qty.

Boxed

5/8 in

6 ft

0.35 lb

Packaging

Blade Width

Blade Length

Product Weight

Shelf Pack Qty.

Boxed

5/8 in

48 in

0.24 lb

Cat. No.

M E A S U R I N G

P R O D U C T S

Doyle Log Scale

1068

■■ Designed for Estimating Board Feet in a Cut Log ■■ Graduated Inches to 1/16ths Lower Edge ■■ Outside Markings for 10 and 18' Logs ■■ Inside Markings for 12', 14' and 16' Logs

Cat. No.

UPC No.

TT524N

037103265678

Steel Blacksmith's Rule

■■ 3/4" X 2', 1/32" Thick, 1-Fold, Tempered Steel Rule ■■ This Brings Rule to a Firm Stop When Opened Straight ■■ Riveted Joint Has Large Side Washer and a Stop ■■ Legible, Permanent, Deeply Etched Black Markings ■■ Lower Edge on One Side Graduated to 1/16ths of an Inch ■■ Upper Edge on Other Side to 1/8ths ■■ Lower Edge 75 Circumference Inches to 1/8ths ■■ For Converting Diameters Directly to Circumference Measurements Cat. No.

UPC No.

037103456601

Packaging

Blade Width

Blade Length

Product Weight

Shelf Pack Qty.

Boxed

3/4 in

2 ft

0.14 lb

M E A S U R I N G

R U L E S

School Shop Steel Rules

■■ 1/32" X 3/4" X 12" Steel Rule ■■ Used in School Shops and Industrial Plants ■■ Medium Weight, Tempered Steel Rule ■■ Hole in One End for Hanging ■■ Deeply-Etched, Permanent Markings are Black-Filled for Easy Reading ■■ Large Graduations, Marked Upper Edge Both Sides ■■ One Side 1/8ths; Other Side 1/16ths ■■ Opposite Measure From Opposite Ends Cat. No.

UPC No.

6012IN

037103450739

Packaging

Blade Thickness

Blade Width

Blade Length

Product Weight

Shelf Pack Qty.

Boxed

1/32 in

3/4 in

12 in

0.07 lb

One-Piece Steel Rules

■■ Bold Markings, Deeply Etched and Permanent are Black Filled ■■ Heavier than on Machine-Divided Rules ■■ Large Graduations, Marked Both Sides, Both Edges ■■ Upper Edge Graduated in 1/8ths, Lower Edge in 1/16ths ■■ Opposite Sides Measure From Opposite Ends Cat. No.

UPC No.

621FT

037103450791

Packaging

Blade Thickness

Blade Width

Blade Length

Product Weight

Shelf Pack Qty.

Boxed

1/16 in

1-1/4 in

1 ft

0.30 lb

622FT

037103450807

Boxed

1/16 in

1-1/4 in

2 ft

0.50 lb

623FT

037103450814

Boxed

1/16 in

1-1/4 in

3 ft

0.80 lb

624FT

037103450821

Boxed

1/16 in

1-1/4 in

4 ft

1.00 lb

626FT

037103450838

Boxed

1/16 in

1-1/4 in

6 ft

1.50 lb

Aluminum Yardstick

Cat. No.

UPC No.

1260

037103453808

Packaging

Blade Thickness

Blade Width

Blade Length

Product Weight

Shelf Pack Qty.

Boxed

1/32 in

15/64 in

36 in

0.30 lb

Blade Length

Product Weight

Shelf Pack Qty.

P R O D U C T S

Tinner's Steel Circumference Rules

■■ Standard Rule with Tinners and Other Sheet Metalworkers ■■ Tempered Medium-Weight Steel ■■ Hole in One End for Hanging ■■ Markings are Black for Easy Reading ■■ One Side Upper Edge Marked Inches to 1/16ths ■■ Reverse Side has Formulas for Calculating Circumference, Diameter, Area ■■ Size Tables for Laying Out Measures and Cans Cat. No.

UPC No.

Packaging

Blade Thickness

Blade Width

M E A S U R I N G

■■ Finest Quality Aluminum Yardstick ■■ Lightweight, Flexible, Rustproof and Sharply Defined Yardstick ■■ Lies Flat and Has a Hang-Up Hole for Storage ■■ Easy-To-Read Markings on Straight Parallel Edges ■■ Fine Graduations One Side Only, Both Edges in Inches to 1/16ths

953FT

037103450982

Boxed

1/16 in

1-1/4 in

3 ft

0.80 lb

954FT

037103450999

Boxed

1/16 in

1-1/4 in

4 ft

1.00 lb

1069

M E A S U R I N G

W H E E L S

Metric English Aluminum Meter Stick

■■ Useful for Making the Transition to the Metric System ■■ Graduated on Front Side in Inches to 1/16ths on Upper Edge ■■ Graduated Decimeters, Centimeters and Millimeters Lower Edge ■■ Other Side Shows Table of Equivalents and Conversions Cat. No.

UPC No.

1261ME

037103453815

Packaging

Blade Thickness

Blade Width

Blade Length

Product Weight

Shelf Pack Qty.

Boxed

1/32 in

1 in, 27 mm

0.40 lb

Pro Series Measuring Wheels

M E A S U R I N G

P R O D U C T S

■■ Measure as Fast as You Can Walk ■■ Wheel Calibrated to Counter - Accurate for Estimated Measurements ■■ Feet & Inches

1070

Cat. No.

UPC No.

Packaging

Description

Ext. Length

PSMW18

037103195272

Carded

Measuring Wheel, Pro Series, Compact, 8ths

42 in

PSMW38

037103195289

Carded

Measuring Wheel, Pro Series, Contractor's, 8ths

45.5 in

Folded Length

Product Weight

Shelf Pack Qty.

21 in

1.15 lb

25 in

3.35 lb

Measuring Wheels

■■ Measure as Fast as You Can Walk ■■ Wheel Calibrated to Counter - Accurate for Estimated Measurements

Cat. No.

UPC No.

Packaging

Description

Ext. Length

Folded Length

Product Weight

Shelf Pack Qty.

MW18TP

037103197368

Carded

Executive Measuring Wheel, Feet and Inches in 8ths

26 in

17 in

0.90 lb

MW18M

037103142061

Carded

Executive Measuring Wheel, Meters/Decimeters

26 in

17 in

1.00 lb

MW38TP

037103197375

Carded

Contractor Measuring Wheel, Feet & Inches in 8ths

41 in

30 in

2.30 lb

MW38M

037103142078

Carded

Contractor Measuring Wheel, Meters/Decimeters

41 in

30 in

2.50 lb

M E A S U R I N G

A N D

I N S P E C T I O N

Deluxe Feeler Gauge

■■ Gauge Measures Clearances From 0.0015 to 0.035" (0.038 to 0.889mm) ■■ Includes One 0.010" Brass Blade to Use with Electronic Ignitions ■■ Blade Lengths: 3-5/16" Long, Blade Width: 1/2"

Cat. No.

161D

UPC No.

082171001611

Packaging

Feeler Gauge Sizes (inch)

Feeler Gauge Sizes (mm)

Product Weight

Shelf Pack Qty.

Carded

0.0015, 0.002, 0.0025, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.01, 0.01 (Brass), 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.02, 0.021, 0.022, 0.023, 0.024, 0.025, 0.026, 0.028, 0.03, 0.032, 0.035

0.038, 0.051, 0.063, 0.076, 0.102, 0.127, 0.152, 0.178, 0.203, 0.229, 0.254, 0.254 (Brass), 0.279, 0.305, 0.33, 0.356, 0.381, 0.406, 0.432, 0.457, 0.483, 0.508, 0.533, 0.559, 0.584, 0.61, 0.635, 0.66, 0.711, 0.762, 0.813, 0.889

0.25 lb

Feeler Gauge

■■ Gauge Measures Clearances 0.002 to 0.025" (0.051 to 0.635mm) ■■ 2-1/2" Rule and 15 Blades ■■ Blade Lengths: 3-5/16" Long

Cat. No.

UPC No.

162D

082171001628

Packaging

Feeler Gauge Sizes (inch)

Feeler Gauge Sizes (mm)

Product Weight

Shelf Pack Qty.

Carded

0.002, 0.003, 0.004, 0.005, 0.006, 0.008, 0.011, 0.012, 0.013, 0.014, 0.016, 0.018, 0.02, 0.022, 0.025

0.051, 0.076, 0.102, 0.127, 0.152, 0.203, 0.279, 0.305, 0.33, 0.356, 0.406, 0.457, 0.508, 0.599, 0.635

0.14 lb

Metric Feeler Gauge

■■ 25-Blade Gauge Measures Clearances From 0.04 to 1mm ■■ Blade Lengths: 3" Long

UPC No.

2274D

082171022746

Packaging

Feeler Gauge Sizes (mm)

Product Weight

Shelf Pack Qty.

Carded

0.04, 0.05, 0.06, 0.07, 0.08, 0.09, 0.10, 0.15, 0.20, 0.25, 0.30, 0.35, 0.40, 0.45, 0.50, 0.55, 0.60, 0.65, 0.70, 0.75, 0.80, 0.85, 0.90, 0.95, 1.00

0.22 lb

P R O D U C T S

Mini Feeler Gauge

■■ Miniature 16-Blade Feeler Gauges Are Only 1/4" Wide and Measure Clearances From 0.010 to 0.035" (0.254 to 0.889mm) ■■ Blade Lengths: 1-3/4" Long

Cat. No.

2062D

UPC No.

082171020629

M E A S U R I N G

Cat. No.

Packaging

Feeler Gauge Sizes (inch)

Feeler Gauge Sizes (mm)

Product Weight

Shelf Pack Qty.

Carded

0.01, 0.012, 0.015, 0.016, 0.017, 0.018, 0.019, 0.02, 0.022, 0.024, 0.025, 0.026, 0.028, 0.03, 0.032, 0.035

0.254, 0.305, 0.381, 0.406, 0.432, 0.457, 0.483, 0.508, 0.559, 0.61, 0.635, 0.66, 0.711, 0.762, 0.813, 0.889

0.05 lb

1071

M E A S U R I N G

A N D

I N S P E C T I O N

Valve-Tappet Feeler Gauge

■■ 11-Blade Gauge Measures Valve Tappet Clearances From 0.008" to 0.026" ■■ Offset Blades Provide Easy Access. ■■ Blade Lengths: 3-3/4" Long

Cat. No.

163D

UPC No.

082171001635

Packaging

Feeler Gauge Sizes (inch)

Feeler Gauge Sizes (mm)

Product Weight

Shelf Pack Qty.

Carded

0.008, 0.010, 0.012, 0.013, 0.014, 0.015, 0.016, 0.018, 0.019, 0.020, 0.026

0.203, 0.254, 0.305, 0.330, 0.356, 0.381, 0.406, 0.457, 0.483, 0.508, 0.660

0.16 lb

Non-Magnetic Feeler Gauge

■■ 6-Blade Gauge Measures Clearance in Electronic Ignition Systems Where Non-Magnetic Blades are Required ■■ These Hard Brass Blades Will Not Magnetize ■■ Blade Lengths: 3-5/16" Long

Cat. No.

UPC No.

2223D

082171022234

Packaging

Feeler Gauge Sizes (inch)

Feeler Gauge Sizes (mm)

Product Weight

Shelf Pack Qty.

Carded

0.006, 0.008, 0.01, 0.012, 0.014, 0.016

0.152, 0.203, 0.254, 0.305, 0.356, 0.406

0.05 lb

M E A S U R I N G

P R O D U C T S

Go-No-Go Feeler Gauge

1072

■■ Gauge Checks Clearance Measurements with a 0.002" Range ■■ Stepped Blades Quickly Indicate If Clearance Fails Within the Specified Range ■■ Twenty-Two Etched Blades Cover the Complete Range of Sizes From 0.004 to 0.027" (0.10 to 0.69mm) ■■ Blade Lengths: 3-5/16" Long Cat. No.

UPC No.

2424D

082171024245

Packaging

Product Weight

Shelf Pack Qty.

Carded

0.21 lb

Spark Plug Gap and Feeler Gauge Set

■■ Use to Set and Measure Spark Plug Gaps Plus Other Ignition Clearances From 0.010 to 0.045" (0.254 to 1.143mm) ■■ Six Wire Gauges Check Spark Plug Gaps and 12 Straight Blades Check Other Clearances ■■ Includes a Double-Ended Electrode Tool for Easy Adjustments ■■ Blade Lengths: 3-5/16" Long

Cat. No.

164

UPC No.

082171001642

Packaging

Feeler Gauge Sizes (inch)

Feeler Gauge Sizes (mm)

Product Weight

Shelf Pack Qty.

Carded

0.025(Wire), 0.03(Wire), 0.034(Wire), 0.035(Wire), 0.04(Wire), 0.045(Wire), 0.01, 0.012, 0.015, 0.016, 0.017, 0.018, 0.019, 0.02, 0.022, 0.024, 0.025, 0.026

0.635(Wire), 0.762(Wire), 0.864(Wire), 0.889(Wire), 1.016(Wire), 1.143(Wire), 0.254, 0.305, 0.381, 0.406, 0.432, 0.457, 0.483, 0.508, 0.559, 0.61, 0.65, 0.66

0.19 lb

M E A S U R I N G

A N D

I N S P E C T I O N

Spark Plug Gap Wire Gauge

■■ Gauge Measures Spark Plug Gaps From 0.015 to 0.045" (0.381 to 1.143mm) ■■ Double-Ended Tool is Included for Adjusting Electrodes

Cat. No.

UPC No.

165

082171001659

Packaging

Feeler Gauge Sizes (inch)

Feeler Gauge Sizes (mm)

Product Weight

Shelf Pack Qty.

Carded

0.02, 0.025, 0.028, 0.03, 0.032, 0.034, 0.035, 0.04

0.508, 0.635, 0.711, 0.762, 0.813, 0.864, 0.889, 1.016

0.08 lb

Spark Plug Gap Wire Gauge

■■ Use Gauge to Measure Spark Plug Electrode Gaps From 0.025 to 0.045" (0.635 to 1.143mm) ■■ Includes 2 Electrode Adjusting Tools

Cat. No.

UPC No.

166D

082171001666

Feeler Gauge Sizes (inch)

Feeler Gauge Sizes (mm)

Product Weight

Shelf Pack Qty.

0.025, 0.03, 0.034, 0.035, 0.04, 0.045

0.635, 0.762, 0.864, 0.889, 1.016, 1.143

0.08 lb

Spark Plug Gap Gauge

UPC No.

2327D

082171023279

Packaging

Feeler Gauge Sizes (inch)

Feeler Gauge Sizes (mm)

Product Weight

Shelf Pack Qty.

Carded

0.04, 0.044, 0.045, 0.05, 0.06, 0.08

1.016, 1.118, 1.143, 1.270, 1.524, 2.032

0.08 lb

Spark Plug Gap Gauge

Cat. No.

UPC No.

3293D

082171032936

P R O D U C T S

■■ Circular Coin-Type Ramp Gauge Easily Measures Spark Plug Gaps From 0.020 to 0.100" (0.635 to 1.143mm)

M E A S U R I N G

Cat. No.

■■ Gauge Measures Spark Plug Electrode Gaps on Gap Plugs From 0.040 to 0.080" (1.016 to 2.032mm) ■■ Includes 2 Electrode Adjusting Tools

Product Weight

Shelf Pack Qty.

0.05 lb

1073

M E A S U R I N G

A N D

I N S P E C T I O N

Digital Brake Drum Gauge

■■ 3" to 16" ■■ Preset at 1-1/2" Depth with Indicators for 0.5" and 1" ■■ Manual Power On/Off ■■ Metric/Inch System Interchange at Any Position ■■ Zero Setting at Any Position ■■ Data Output Interface ■■ Measure Wear Dimension of the Brake Drum ■■ Resolution / Repeatability 0.0005" X 0.01mm ■■ Storage Case Cat. No.

UPC No.

3777

082171037771

Packaging

Product Weight

Shelf Pack Qty.

Boxed

4.06 lb

Digital Brake Rotor Gauge

■■ 0 to 6" ■■ Manual Power On/Off ■■ Metric/Inch System Interchange at Any Position ■■ Zero Setting at Any Position ■■ Data Output Interface ■■ Measure Wear Dimension of the Brake Rotors ■■ Resolution / Repeatability 0.0005" X 0.01mm ■■ Storage Case

UPC No.

3774D

082171037740

Packaging

Product Weight

Shelf Pack Qty.

Boxed

1.01 lb

Cat. No.

M E A S U R I N G

P R O D U C T S

6" Digital Caliper with Large LCD window

1074

■■ LCD Displays Up to 5 Digits ■■ Glass Window Over LCD is Clearer and Does Not Wear Out ■■ Color Coded Off, On/Zero and Inch/mm ■■ Stainless Steel Frame with Hardened Jaws, Graduated ■■ Scale and Thumb Roll ■■ 4 Way Measurement, Inside, Outside, Depth & Step ■■ Resolution / Repeatability 0.001" X 0.01mm ■■ Data Output Interface ■■ Fitted in a Plastic Box Cat. No.

UPC No.

3756D

082171037566

Packaging

Product Weight

Shelf Pack Qty.

Boxed

0.76 lb

M E A S U R I N G

A N D

I N S P E C T I O N

Electronic Digital Rotor Micrometer

■■ Manual Power On/Off ■■ 0-1.3", (0-76mm) Grad. 0.001" ■■ 3-1/2" Deep Throat ■■ Metric/Inch System Interchange at Any Position ■■ Zero Setting at Any Position ■■ With Data Output Interface ■■ Measures Thickness of Inside Groves ■■ Fitted in A Plastic Box

Cat. No.

UPC No.

3763

082171037634

Packaging

Product Weight

Shelf Pack Qty.

Boxed

3.72 lb

Dial Indicator Set with On/Off Stand

■■ English Dial Gauge Range: 0-1.3", Gradations: 0.001" ■■ Centered V-Magnet for Strongest Grip on Round or Flat Surfaces ■■ Powerful 130 Lbs. Pull ■■ Two Magnetic Mounting Surfaces: Bottom and Back ■■ Swivel Adapter to Mount All Agd Dial Indicators with Lug Backs ■■ Universal Dovetail Clamp for Dial Test Indicators ■■ On / Off Switch ■■ Center Rod 1/2" Diameter X 7" High

UPC No.

3761

082171037610

Cat. No.

UPC No.

3766

082171037665

Cat. No.

UPC No.

2527D

082171025273

Shelf Pack Qty.

4.64 lb

Packaging

Product Weight

Shelf Pack Qty.

Boxed

0.46 lb

Dial Indicator

P R O D U C T S

■■ 4" Stainless Steel ■■ One Side - 32nd Inch, One Side - 1mm.

Product Weight

Boxed

M E A S U R I N G

■■ 2-1/4" Face ■■ 3/8" Diameter Shank ■■ English Dial Gauge Range: 0-1.3" ■■ Graduations: 0.001"

Packaging

Cat. No.

Pocket Slide Caliper

Packaging

Product Weight

Shelf Pack Qty.

Boxed

0.15 lb

1075

M E A S U R I N G

A N D

■■ Stainless Steel Flexible Blade ■■ One Side - 32nd Inch, One Side - 1mm

Cat. No.

UPC No.

2522D

082171025228

I N S P E C T I O N

6" Pocket Stainless Steel Rule

Packaging

Product Weight

Shelf Pack Qty.

Boxed

0.05 lb

Packaging

Product Weight

Shelf Pack Qty.

Boxed

0.80 lb

Angle Finder

■■ Use Finder to Measure Angles of Most Parts Such As Frame Angle (Pitch Forward or Backward) for Setting Truck Front Ends. ■■ A Magnet in the Base Holds Tool in Place. It is Graduated in 1/2° Increments.

Cat. No.

UPC No.

2968D

082171029684

M E A S U R I N G

P R O D U C T S

Hand-Held Tachometer

1076

■■ Tachometer Checks Diesels, Pumps, Compressors, Power TakeOffs and Farm and Construction Equipment Revolution Speed ■■ Tool is Ideal Where Electric Tachometer Cannot Be Used ■■ To Use, Hold Rubber Tip Against End of Rotating Shaft and Read Revolutions Per Minute Directly From Dial ■■ Range is 100 to 4000 RPM (Clockwise or Counterclockwise) ■■ Length: 4-1/4" ■■ Diameter: 2-3/4" Cat. No.

UPC No.

2967

082171029677

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Hand-Held Tachometer

0.75 lb

Mechanic’s Stethoscope

■■ Stethoscope Locates the Source of Engine Noise Quickly ■■ Listen for Trouble By Tracing the Sound of Flowing Water, Oil, Gas or Steam ■■ Identify Piston Slap, Worn Gears, Faulty Valves, Water Pump Failure, Damaged Gaskets and Defective Bearings ■■ Stethoscope Has a Shock-Resistant Handle and Disassembles for Storage

Cat. No.

UPC No.

835D

082171008351

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Mechanic's Stethoscope

0.25 lb

M E A S U R I N G

A N D

I N S P E C T I O N

1-1/4" Round Magnifying Mirror with Pocket Clip and Telescoping Handle

■■ Perfect for Inspecting Hidden Areas, the Mirror Swivels to Almost Any Position ■■ Overall Length: 17"

Cat. No.

UPC No.

2840D

082171028403

Packaging

Product Weight

Carded

0.10 lb

Telescoping Magnetic Pickup Tool

■■ Tool Extends Up to 25-9/16" to Pick Up Hard-To-Reach Ferrous Metal Parts or Tools Up to 1-1/2 Lbs ■■ Includes a Pocket Clip

Cat. No.

UPC No.

2593

082171025938

Packaging

Product Weight

Carded

0.08 lb

23" Flexible Retrieving Tool

Cat. No.

UPC No.

2391

082171023910

■■ Retrieve Small Objects From Hard-To-Reach Places ■■ Push the Button to Open the Claws and Release to Grab

Packaging

Product Weight

Carded

0.23 lb M E A S U R I N G P R O D U C T S

1077

M E A S U R I N G

A N D

I N S P E C T I O N

22 Pc. Combination Gauge Set ■■ Made in the USA - Quality and Availability ■■ Feeler Gauges Are Mostly Used in to Measure Gap Widths - the Clearance Between Two Parts ■■ For Easy Identification, Each Blade is Permanently Marked with the Blade Thickness. ■■ Blades Are Flexible Enough That, Even If They Are All on the Same Hinge, Several Can Be Stacked Together to Gauge Intermediate Values Cat. No.

UPC No.

70-801

781412708011

Packaging

Feeler Gauge Sizes (inch)

Product Weight

Shelf Pack Qty.

Boxed

0.002, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.010, 0.013, 0.015, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020, 0.022, 0.025

0.14 lb

8 Pc. Piston Gauge Set ■■ Made in the USA - Quality and Availability ■■ Feeler Gauges Are Mostly Used in to Measure Gap Widths - the Clearance Between Two Parts ■■ For Easy Identification, Each Blade is Permanently Marked with the Blade Thickness. ■■ Blades Are Flexible Enough That, Even If They Are All on the Same Hinge, Several Can Be Stacked Together to Gauge Intermediate Values Cat. No.

UPC No.

70-803

781412708035

Packaging

Feeler Gauge Sizes (inch)

Product Weight

Shelf Pack Qty.

Boxed

0.002, 0.003, 0.004, 0.005, 0.006, 0.008, 0.010, 0.015

0.16 lb

M E A S U R I N G

P R O D U C T S

16 Pc. Universal O.H.V. Feeler Gauge Set

1078

■■ Made in the USA - Quality and Availability ■■ The Offset Blades Are Bent at 45° to Go Around Impediments ■■ For Easy Identification, Each Blade is Permanently Marked with the Blade Thickness. ■■ Blades Are Flexible Enough That, Even If They Are All on the Same Hinge, Several Can Be Stacked Together to Gauge Intermediate Values

Cat. No.

UPC No.

70-807

781412708073

Packaging

Feeler Gauge Sizes (inch)

Product Weight

Shelf Pack Qty.

Boxed

0.009, 0.010, 0.011, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020, 0.021, 0.023, 0.024, 0.025, 0.026, 0.027

0.20 lb

11 Pc. Bent Feeler Gauge Set ■■ Made in the USA - Quality and Availability ■■ The Offset Blades Are Bent at 45° to Go Around Impediments ■■ For Easy Identification, Each Blade is Permanently Marked with the Blade Thickness. ■■ Blades Are Flexible Enough That, Even If They Are All on the Same Hinge, Several Can Be Stacked Together to Gauge Intermediate Values Cat. No.

UPC No.

70-811

781412708110

Packaging

Feeler Gauge Sizes (inch)

Product Weight

Shelf Pack Qty.

Boxed

0.006, 0.008, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.018, 0.019, 0.020

0.12 lb

M E A S U R I N G

A N D

I N S P E C T I O N

32 Pc. Feeler Gauge Set ■■ Made in the USA - Quality and Availability ■■ Feeler Gauges Are Mostly Used in to Measure Gap Widths - the Clearance Between Two Parts ■■ For Easy Identification, Each Blade is Permanently Marked with the Blade Thickness. ■■ Blades Are Flexible Enough That, Even If They Are All on the Same Hinge, Several Can Be Stacked Together to Gauge Intermediate Values Cat. No.

UPC No.

70-790

781412707908

Packaging

Product Weight

Shelf Pack Qty.

Boxed

0.30 lb

22 Pc. Master Go-No-Go Gauge Set ■■ Made in the USA - Quality and Availability ■■ Feeler Gauges Are Mostly Used in to Measure Gap Widths - the Clearance Between Two Parts ■■ For Easy Identification, Each Blade is Permanently Marked with the Blade Thickness. ■■ Blades Are Flexible Enough That, Even If They Are All on the Same Hinge, Several Can Be Stacked Together to Gauge Intermediate Values Cat. No.

70-815

UPC No.

781412708158

Packaging

Go-No-Go Gauge Sizes

Product Weight

Shelf Pack Qty.

Boxed

0.004 - 0.006, 0.005 - 0.007, 0.006 - 0.008, 0.007 - 0.009, 0.008 - 0.010, 0.009 - 0.011, 0.010 - 0.012, 0.011 - 0.013, 0.012 - 0.014, 0.013 - 0.015, 0.014 - 0.016, 0.015 - 0.017, 0.016 - 0.018, 0.017 - 0.019, 0.018 - 0.020, 0.019 - 0.021, 0.020 - 0.022, 0.021 - 0.023, 0.022 - 0.024, 0.023 - 0.025, 0.024 - 0.026, 0.025 - 0.027

1.00 lb

12 Pc. and 25 Pc. Long Blade Gauge Sets

Cat. No.

UPC No.

Packaging

Feeler Gauge Sizes (inch)

Product Weight

Shelf Pack Qty.

70-817

781412708172

Boxed

0.0015, 0.002, 0.003, 0.004, 0.005, 0.006, 0.008, 0.010, 0.012, 0.014, 0.015, 0.020

0.32 lb

70-819

781412708196

Boxed

0.0015, 0.002, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020, 0.021, 0.025, 0.027, 0.030, 0.040

0.73 lb

P R O D U C T S

10 Pc. Spark Plug Wire Gauge Set ■■ Made in the USA - Quality and Availability ■■ Feeler Gauges Are Mostly Used in to Measure Gap Widths - the Clearance Between Two Parts ■■ For Easy Identification, Each Blade is Permanently Marked with the Blade Thickness.

Cat. No.

UPC No.

70-827

781412708271

M E A S U R I N G

■■ Made in the USA - Quality and Availability ■■ Feeler Gauges Are Mostly Used in to Measure Gap Widths - the Clearance Between Two Parts ■■ For Easy Identification, Each Blade is Permanently Marked with the Blade Thickness. ■■ Blades Are Flexible Enough That, Even If They Are All on the Same Hinge, Several Can Be Stacked Together to Gauge Intermediate Values

Packaging

Feeler Gauge Sizes (inch)

Product Weight

Shelf Pack Qty.

Boxed

0.020, 0.025, 0.028, 0.030, 0.032, 0.034, 0.035, 0.038, 0.040

0.08 lb

1079

M E A S U R I N G

A N D

I N S P E C T I O N

Telescoping Inspection Mirrors ■■ Made in the USA - Quality and Availability ■■ Designed for Inspecting Hidden Areas ■■ 360° Adjustable Mirror with A Telescoping Handle Cat. No.

UPC No.

70-920

781412709209

Packaging

Mirror Shape

Mirror Size

Overall Length Min

Overall Length Max

Product Weight

Shelf Pack Qty.

Boxed

Oval

1.000 in x 2.000 in

5.000 in

17.000 in

0.44 lb

Overall Length Min

Overall Length Max

Product Weight

Shelf Pack Qty.

Inspection Mirrors ■■ Made in the USA - Quality and Availability ■■ Designed for Inspecting Hidden Areas ■■ 360° Adjustable Mirror and Plastic Grip ■■ Meets or Exceeds US Federal Spec GGG-M-350A Cat. No.

UPC No.

Packaging

Mirror Shape

Mirror Size

70-921

781412709216

Boxed

Circular

0.875 in

7.500 in

0.06 lb

70-923

781412709230

Boxed

Oval

1.000 in x 2.000 in

8.500 in

0.09 lb

70-925*

781412709254

Boxed

Circular

2.250 in

10.000 in

14.000 in

0.24 lb

70-927

781412709278

Boxed

Circular

1.250 in

8.000 in

0.08 lb

70-929*

781412709292

Boxed

Rectangular

2.125 x 3.500 in

11.250 in

15.500 in

0.28 lb

* Has a Telescoping Handle

Magnetic Retrieving Tools Chrome Plated, Cushion Grip

M E A S U R I N G

P R O D U C T S

■■ Made in the USA - Quality and Availability ■■ Designed for Retrieving Small Metal Parts That Fall or in Inaccessible Areas ■■ Strong Magnetic Has A Holding Power of Up to 2 Pounds

1080

Cat. No.

UPC No.

Packaging

Overall Length Min

Overall Length Max

Product Weight

Shelf Pack Qty.

70-933

781412709339

Boxed

16.750 in

26.750 in

0.39 lb

70-935

781412709353

Boxed

8.500 in

0.08 lb

Flexible Spring Claw ■■ Made in the USA - Quality and Availability ■■ Designed for Retrieving or Positioning Small Parts of Any Material That Fall or in Inaccessible Areas ■■ Spring Loaded Plunger Opens Jaws at the End of the Flexible Shaft ■■ When Plunger is Released, Jaws Firmly Grip An Object with Surprising Strength ■■ Meets or Exceeds US Federal Spec GGG-F-360b Cat. No.

UPC No.

70-943

781412709438

Packaging

Overall Length Min

Product Weight

Shelf Pack Qty.

Boxed

23.500 in

0.20 lb

S T R I K I N G

S T R U C K

Ball Pein Hammers............................ 1084 Tradesmenâ&#x20AC;&#x2122;s Hammers..................... 1084 Claw Hammers................................... 1087 Premium Claw Hammers................... 1088 Hatchets............................................. 1090

Ball Pein Hammers............................ 1092 Claw Hammers.................................. 1092 Dead Blow Hammers......................... 1094 Brass Hammers................................. 1098 13

Punch & Chisel Sets.......................... 1103 Chisels................................................ 1111 Punches.............................................. 1114

S T R I K I N G

Chisels................................................ 1123 Punches............................................. 1123

S T R U C K

Punch & Chisel Sets.......................... 1120

Hammers & Sets................................ 1100

1081

S T R I K I N G

S T R U C K

Striking/Struck The quality of Plumb tools has been recognized and preferred by tool users throughout the world. The special analysis steel used to make Plumb® tools is forged to close tolerances and heat treated to build in the toughness necessary to withstand impact. Extra care is then taken in hardening and tempering to make each part of the tool ready for the specific job it has to do. ®

You can be sure Plumb® tools have the toughness, durability and keenness to do the job. Plumb® tools are engineered for balance and exacting care is taken to assure the head is “hung” on the handle at the right angle. This built-in balance gives Plumb® tools extra driving power. They swing easy – hit hard.

HAMMERS & HATCHETS Weight forward design with better balance for increased power and less fatique

Checkered face on selected models provides increased control when driving nails

Patented anti-vibration technology absorbs shock and minimizes fatique

High-luster, full polish finish

Oversized striking area for improved efficiency and accuracy in striking

1-piece forged solid steel construction

‘Thumb-Saving’ magnetic nail starter saves time and reduces chance of injury

Contoured band to prevent forward slip and provide better grip

S T R U C K

Co-molded grip with pliable outer material for improved comfort

S T R I K I N G

Permabond® Chemical Bonding Process Permabond® is a chemical weld used in Plumb® tool eyes to join head and handle together. Where conventional wedging splits wood, allowing moisture to swell and shrink the handle and eventually loosen the head, Permabond® chemical bonding process seals moisture out, forming a bond so tight it takes approximately 2 tons of pressure to pull it apart. Permabond® chemical bonding process is used on all nail hammers, except one-piece hammers.

Plumb offers a full line of hammers and hatchets for a wide range of applications with solid steel, fiberglass or hickory handles

1082

CONVENTIONAL WEDGING

PLUMB® PERMABOND®

S T R I K I N G

S T R U C K

Striking/Struck Armstrong offers a wide variety of professional punches, chisels, hammers and accessories for just about any application. All are made to exacting standards with ASME and Federal Spec callouts where applicable. Punches and chisels are manufactured from either tool steel or high alloy steel for strength and durability. Traditional hammers are drop forged from alloy steel while dead blow hammers incorporate a steel shot filled canister. Available individually or in a selection of sets. ®

CHISELS, PUNCHES & HAMMERS

Manufactured from shock resistant tool steel for unequalled strength, toughness, and durability; higher hardness without brittleness Pin area precision ground to prevent any “binding” in work area

Full shank heat treat is a two-step process, entire tool length is hardened and tempered, then the struck end is drawn back to resist “mushrooming” & “chipping” Modified parabolic head directs the striking force to the center of the tool for extented tool life

Hex stock fits more securely in a punch & chisel holder and reduces the tendency to roll on work surfaces

Cutting edges are ground to precise angles for efficient cutting and long life

Holds punches & chisels up to 1-1/16” hex stock while protecting against hand injury “V” head effectively traps punch or chisel securely on 3 sides reducing risk of injury

Tri-oval handle conforms to the hand increasing comfort Manufactured from shock resistant tool steel for unequalled strength, toughness, and durability; higher hardness without brittleness

Striking/Struck CHISELS, PUNCHES & HAMMERS

Precision Hardened Alloy Steel

Surface ground for easy size identification

Softened striking surface

Hardened Tips

S T R I K I N G

GearWrench® striking and struck tools offer performance features that outperform other brands. Hammers and chisels are designed for long life and with safety in mind. Precision ground surfaces provide better visibility and ease of use.

Fully polished head

Fiberglass handle

S T R U C K

HAMMERS

Molded-on rubber grip

Forged alloy steel head

1083

H A M M E R S

Fiberglass Ball Pein Hammers

■■ Rust-Resistant, Forged Black Head with Polished Poles and Peins ■■ Professional Quality Fiberglass Handle ■■ Permabond® Construction Between Head and Handle ■■ Comfortable Black Cushion Grip ■■ Meets or Exceeds ASME B173.2 and US Federal Spec. GGG-H86C Cat. No.

UPC No.

Packaging

Head Weight (Ounces)

Head Weight (Pounds)

Length

Face Finish

Product Weight

11426

037103114266

16 oz

1.0 lb

12.75 in

Polished

1.50 lb

Shelf Pack Qty.

11428

037103114280

Carded

24 oz

1.5 lb

15 in

Polished

2.22 lb

11429

037103114297

Carded

32 oz

2 lb

15 in

Polished

1.19 lb

Shelf Pack Qty.

Hickory Ball Pein Hammers

S T R I K I N G

S T R U C K

■■ Ground, Black Head ■■ Polished Poles and Peins ■■ Quality, Hickory Handle ■■ Permabond® Construction Between Head and Handle ■■ Meets or Exceeds ASME B173.2 and US Federal Spec. GGG-H86C

1084

Cat. No.

UPC No.

Packaging

Head Weight (Ounces)

Head Weight (Pounds)

Length

Face Finish

Product Weight

11494

037103114945

Bulk

4 oz

0.25 lb

10.5 in

Polished

0.44 lb

11496

037103114969

Bulk

8 oz

0.5 lb

11.25 in

Polished

0.75 lb

11497

037103114976

Bulk

12 oz

0.75 lb

11.25 in

Polished

0.90 lb

11498

037103114983

Bulk

16 oz

1.0 lb

12.75 in

Polished

1.40 lb

11499

037103114990

Bulk

20 oz

1.25 lb

12.75 in

Polished

1.60 lb

11520

037103115201

Bulk

24 oz

1.5 lb

15 in

Polished

2.10 lb

11521

037103115218

Bulk

32 oz

2 lb

15 in

Polished

2.50 lb

11522

037103115225

Bulk

40 oz

2.5 lb

15 in

Polished

3.00 lb

Blacksmith Hand Hammer

■■ Quality, Steel Forged Head, Hardened and Tempered ■■ Durable, Flat Black Finish on Head ■■ Hickory Handle ■■ Wood Wedged for Easy Handle Replacement ■■ Weight Distribution Concentrated Behind Striking Face for Added Power ■■ Meets or Exceeds US Federal Spec. GGG-H-86C

Packaging

Head Weight (Ounces)

Head Weight (Pounds)

Length

Face Diameter

Product Weight

Shelf Pack Qty.

037103115249

Bulk

40 oz

2.5 lb

14 in

1.25 in

2.93 lb

037103115256

Bulk

48 oz

3.0 lb

14 in

1.25 in

3.50 lb

Cat. No.

UPC No.

11524 11525P

H A M M E R S

Fiberglass Brick Hammers

■■ Forged Head ■■ Polished Face, Chamfer, Bit, Back and Sides ■■ Fiberglass Handle with Comfortable Cushion Grip ■■ Permabond® Construction Between Head and Handle ■■ 1 1/8"- Wide Bit on 24oz. ■■ 1 1/16"- Wide Bit on 15oz.

Cat. No.

UPC No.

Packaging

Head Weight (Ounces)

Head Weight (Pounds)

Length

Face Finish

Product Weight

11422

037103114228

Carded

15 oz

1 lb

12.25 in

Polished

1.70 lb

Shelf Pack Qty.

11421

037103114211

Carded

24 oz

1.5 lb

13 in

Polished

2.15 lb

Face Finish

Product Weight

Shelf Pack Qty.

Hickory Handled Brick Hammers

■■ Forged Head ■■ Durable, Black Epoxy Powder Paint on Head ■■ Sharp Cutting Bit ■■ Strong Hickory Handle ■■ Permabond® Construction Between Head and Handle ■■ 1 1/8"- Wide Bit on 24oz. ■■ 1 1/16"- Wide Bit on 15oz. Cat. No.

UPC No.

Packaging

Head Weight (Ounces)

Head Weight (Pounds)

Length

11492

037103114921

Bulk

15 oz

1 lb

11 in

Polished

1.46 lb

11491P

037103114914

Bulk

24 oz

1.5 lb

11 in

Polished

1.95 lb

Fiberglass Wide Bit Brick Hammers

Cat. No.

UPC No.

11502

037103115027

Packaging

Head Weight (Ounces)

Head Weight (Pounds)

Length

Face Finish

Product Weight

Shelf Pack Qty.

Carded

20 oz

1.25 lb

13 in

Polished

1.90 lb

S T R I K I N G

■■ Forged Head ■■ Durable, Black Epoxy Powder Paint on Head ■■ Sharp, Wide Cutting Bit ■■ Fiberglass Handle with Comfortable Cushion Grip ■■ Permabond® Construction Between Head and Handle ■■ 1 3/4"- Wide Bit

/ S T R U C K

Solid Steel Brick Hammers

■■ Patent Pending Anti-Vibration Shock Absorbing Technology ■■ Anti-Vibration Feature Absorbs Shock and Minimizes Muscle Fatigue ■■ 1-Piece Forged Solid Steel Construction ■■ Co-Molded Contoured Handle for Increased Comfort and Control ■■ High-Luster, Full Polish Finish

Cat. No.

UPC No.

Packaging

Head Weight (Ounces)

Head Weight (Pounds)

Length

Face Finish

Product Weight

SS20BHN

037103228277

Carded

20 oz

1.25 lb

11 in

Polished

1.84 lb

Shelf Pack Qty.

SS24BHN

037103228284

Carded

24 oz

1.5 lb

11 in

Polished

1.96 lb

1085

H A M M E R S

Hickory Handled Scaling Hammers

■■ Forged Head ■■ Durable, Black Epoxy Powder Paint Finish on Head ■■ Red Hickory Handle ■■ Permabond® Construction Between Head and Handle ■■ Used By Welders

Cat. No.

UPC No.

11530

037103115300

Packaging

Head Weight (Ounces)

Head Weight (Pounds)

Length

Face Finish

Product Weight

Shelf Pack Qty.

Bulk

16 oz

1 lb

13 in

Black

1.60 lb

Fiberglass Handled Prospecting Hammers

■■ Forged Head ■■ Polished Face, Chamfer, and Back ■■ Fiberglass Handle with Comfortable Cushion Grip ■■ Permabond® Construction Between Head and Handle ■■ Known As the "Rock Hound" Hammer

UPC No.

11423

037103114235

S T R I K I N G

S T R U C K

Cat. No.

1086

Packaging

Head Weight (Ounces)

Head Weight (Pounds)

Length

Face Finish

Product Weight

Shelf Pack Qty.

Carded

16 oz

1 lb

12.5 in

Polished

1.70 lb

Hickory Handled Prospecting Hammers

■■ Forged Head ■■ Durable, Black Epoxy Powder Paint Finish on Head ■■ Polished Face and Chamfer ■■ Strong Hickory Handle ■■ Permabond® Construction Between Head and Handle ■■ Used Primarily By Prospectors and Geologists

Cat. No.

UPC No.

11493

037103114938

Packaging

Head Weight (Ounces)

Head Weight (Pounds)

Length

Face Finish

Product Weight

Shelf Pack Qty.

Bulk

16 oz

1 lb

12.5 in

Polished

1.45 lb

H A M M E R S

Premium Curved Claw

■■ High-Luster, Full-Polished Finish ■■ Virtually Unbreakable Fiberglass Handle ■■ Solid Fiberglass Core Covered with A Molded Nylon Jacket ■■ Resists Breakage Due to Overstrike ■■ Contoured Handle for Increased Comfort and Reduced Fatigue ■■ Enlarged Handle Base for Butting Material ■■ New Grip Material Reduces Handle Slickness ■■ Factory Balanced for Maximum Striking Power ■■ Permabond® Construction Between Head and Handle Cat. No.

UPC No.

11403N

037103226907

Packaging

Head Weight (Ounces)

Length

Face Finish

Product Weight

Shelf Pack Qty.

Carded

13 oz

12.5 in

Polished

1.25 lb

11402N

037103226891

Carded

16 oz

13 in

Polished

1.65 lb

11400N

037103226884

Carded

20 oz

13 in

Polished

1.85 lb

Length

Face Finish

Product Weight

Shelf Pack Qty.

Premium Ripping Claw

■■ High-Luster, Full-Polished Finish ■■ Virtually Unbreakable Fiberglass Handle ■■ Contoured Handle for Increased Comfort and Reduced Fatigue ■■ Enlarged Handle Base for Butting Material ■■ New Grip Material Reduces Handle Slickness ■■ Factory Balanced for Maximum Striking Power ■■ Permabond® Construction Between Head and Handle

Cat. No.

UPC No.

Packaging

Head Weight (Ounces)

Carded

16 oz

13 in

Polished

1.65 lb

Carded

20 oz

13 in

Polished

1.80 lb

11414N

037103226914

Carded

22 oz

13.5 in

Polished

2.08 lb

11416N

037103226938

Carded

22 oz

15 in

Polished

1.90 lb

11417N

037103226945

Carded

22 oz

15 in

Checkered

2.10 lb

Head Weight (Ounces)

Length

Face Finish

Product Weight

Shelf Pack Qty.

S T R I K I N G

037103226921 037103226952

Regular Curved Claw

Packaging

11407

037103114075

Carded

13 oz

12.5 in

Polished

1.40 lb

11406

037103114068

Carded

16 oz

13 in

Polished

1.66 lb

11405

037103114051

Carded

20 oz

13 in

Polished

1.90 lb

S T R U C K

UPC No.

■■ Polished Finish on Head, Bell, Striking Face, Back and Sides ■■ Round Bell and Octagon Neck ■■ Virtually Unbreakable Fiberglass Handle ■■ Solid Fiberglass Core Covered with A Molded Nylon Jacket ■■ Resists Breakage Due to Overstrike ■■ Contoured Handle for Increased Comfort and Reduced Fatigue ■■ Enlarged Handle Base for Butting Material ■■ New Grip Material Reduces Handle Slickness ■■ Factory Balanced for Maximum Striking Power Cat. No.

11415N 11420N

1087

H A M M E R S

Regular Ripping Claw

■■ Polished Finish on Head, Bell, Striking Face, Back and Sides ■■ Round Bell and Octagon Neck ■■ Virtually Unbreakable Fiberglass Handle ■■ New Grip Material Reduces Handle Slickness ■■ Factory Balanced for Maximum Striking Power ■■ Permabond® Construction Between Head and Handle

Packaging

Head Weight (Ounces)

Length

Face Finish

Product Weight

Shelf Pack Qty.

037103114181

Carded

20 oz

13 in

Polished

1.60 lb

037103114198

Carded

16 oz

13 in

Polished

1.63 lb

Cat. No.

UPC No.

11418 11419

Solid Steel Anti-Shock Premium Curved Claw

■■ Patent Pending Anti-Vibration Shock Absorbing Technology ■■ Anti-Vibration Feature Absorbs Shock and Minimizes Muscle Fatigue ■■ 1-Piece Forged Solid Steel Construction ■■ Co-Molded Hatchet Style Handle for Increased Comfort and Control ■■ High-Luster, Full Polished Finish ■■ Magnetic Nail Starter

UPC No.

SS16CN

037103226648

SS20CN

037103226662

Head Weight (Ounces)

Length

Face Finish

Product Weight

Shelf Pack Qty.

Carded

16 oz

12.875 in

Polished

1.86 lb

Carded

20 oz

13.75 in

Polished

1.80 lb

Packaging

Cat. No.

S T R I K I N G

S T R U C K

Solid Steel Anti-Shock Premium Ripping Claw

■■ Patent Pending Anti-Vibration Shock Absorbing Technology ■■ Anti-Vibration Feature Absorbs Shock and Minimizes Muscle Fatigue ■■ 1-Piece Forged Solid Steel Construction ■■ Co-Molded Hatchet Style Handle for Increased Comfort and Control ■■ High-Luster, Full Polished Finish ■■ Magnetic Nail Starter

1088

Packaging

Head Weight (Ounces)

Length

Face Finish

Product Weight

Shelf Pack Qty.

037103226655

Carded

16 oz

12.875 in

Polished

1.65 lb

SS20RN

037103226679

Carded

20 oz

13.75 in

Polished

1.88 lb

SS22RCFN

037103226709

Carded

22 oz

15.875 in

Checkered

2.09 lb

SS22RN

037103226723

Carded

22 oz

15.875 in

Polished

2.09 lb

SS28RCFN

037103226716

Carded

28 oz

16 in

Checkered

2.30 lb

SS28RN

037103226693

Carded

28 oz

16 in

Polished

2.30 lb

Cat. No.

UPC No.

SS16RN

H A M M E R S

Autograf Hammers - Premium Curved Claw

■■ High-Luster, Full-Polished ■■ Quality, Red Hickory Handle ■■ Permabond® Construction Between Head and Handle ■■ Factory Balanced

Cat. No.

UPC No.

Packaging

Head Weight (Ounces)

Length

Face Finish

Product Weight

Shelf Pack Qty.

11438

037103114389

Bulk

13 oz

12.5 in

Polished

1.18 lb

11436

037103114365

Bulk

16 oz

13 in

Polished

1.45 lb

11435

037103114358

Bulk

20 oz

13 in

Polished

1.68 lb

Product Weight

Shelf Pack Qty.

Autograf Hammers - Premium Ripping Claw

■■ High-Luster, Full-Polished Head, Pole, Back and Sides ■■ Quality, Red Hickory Handle ■■ Permabond® Construction Between Head and Handle ■■ Factory Balanced

UPC No.

Packaging

Head Weight (Ounces)

Length

Face Finish

11440

037103114402

Bulk

16 oz

13 in

Polished

1.46 lb

11439

037103114396

Bulk

22 oz

13.5 in

Polished

1.80 lb

11442

037103114426

Bulk

22 oz

16 in

Checkered

2.00 lb

4 S T R I K I N G

Hand Drilling Hammer

11649

037103116499

Packaging

Head Weight (Ounces)

Head Weight (Pounds)

Length

Face Diameter

Product Weight

Shelf Pack Qty.

Bulk

48 oz

3.0 lb

10.75 in

1.25 in

3.46 lb

S T R U C K

UPC No.

■■ Black Forged Head ■■ Hickory Handle ■■ Wood Wedged for Easy Handle Replacement ■■ Recommended for Striking Cold Chisels and Brick Chisels ■■ Also for Punches, and Star Drills ■■ Known As the "Stone Cutter’s" Hammer ■■ Meets or Exceeds US Federal Spec. GGG-H-86C

Cat. No.

1089

H A M M E R S

Double Faced Engineer's Hammers

■■ Forged From High-Quality Steel, Hardened and Tempered ■■ Durable, Flat Black Finish on Head ■■ Two Precision Machined Driving Faces ■■ Hickory Handle ■■ Wood Wedged for Easy Handle Replacement ■■ Meets or Exceeds ASME B173.3

Cat. No.

UPC No.

11527

037103115270

Packaging

Head Weight (Ounces)

Head Weight (Pounds)

Length

Product Weight

Shelf Pack Qty.

Bulk

40 oz

2.5 lb

14 in

2.86 lb

11528

037103115287

Bulk

48 oz

3 lb

14 in

3.45 lb

11529NN

037103227164

Bulk

64 oz

4 lb

15.75 in

4.80 lb

Half Hatchets (Octagon Pole) Hickory Handle

Cat. No.

UPC No.

11549

037103115492

Packaging

Head Weight (Ounces)

Bit Size

Length

Product Weight

Shelf Pack Qty.

Bulk

30 oz

3-5/8 in

13.5 in

2.20 lb

Broad Hatchet

■■ Black Epoxy Finish on Head ■■ Heavy Hatchet Has Broad, Single-Bevel, Cutting Edge ■■ Hickory Handle ■■ Permabond® Construction Between Head and Handle

S T R I K I N G

S T R U C K

■■ Durable, Black Epoxy Finish on Head ■■ Octagon-Shaped Pole ■■ Hardened, Tempered Bit Holds Sharp Cutting Edge ■■ Hickory Handle ■■ Permabond® Construction Between Head and Handle

1090

Cat. No.

UPC No.

11554

037103115546

Packaging

Head Weight (Ounces)

Bit Size

Length

Product Weight

Shelf Pack Qty.

Bulk

36 oz

4-1/2 in

15.5 in

3.23 lb

H A M M E R S

Expert California Lathe Hatchet

■■ Full Polished Head ■■ Checkered Striking Face ■■ Thin Blade ■■ Hickory Handle ■■ Permabond® Construction Between Head and Handle

Cat. No.

UPC No.

11544P

037103115447

Packaging

Head Weight (Ounces)

Bit Size

Length

Product Weight

Shelf Pack Qty.

Bulk

20 oz

2-1/8 in

12.5 in

1.80 lb

■■ Full Polished Head ■■ Checkered Face ■■ Sharp Cutting Edge ■■ Hickory Handle ■■ Permabond® Construction Between Head and Handle

Cat. No.

UPC No.

11559P

037103115591

Packaging

Head Weight (Ounces)

Bit Size

Length

Product Weight

Shelf Pack Qty.

Bulk

28 oz

3-1/2 in

18 in

2.45 lb

Expert Shingling Hatchet

UPC No.

11558

037103115584

Packaging

Head Weight (Ounces)

Bit Size

Length

Product Weight

Shelf Pack Qty.

Bulk

24 oz

2-1/8 in

13 in

2.20 lb

Cat. No.

S T R I K I N G

■■ Full-Polished Head ■■ Adjustable Gauge ■■ Checkered Face ■■ Draw Knife Inner Blade ■■ Hickory Handle with Leather Strap ■■ Permabond® Construction Between Head and Handle ■■ Designed for the Expert Shingler

S T R U C K

1091

H A M M E R S

Ball Pein Hammers, Fiberglass Handle ■■ Made in the USA - Quality and Availability ■■ Dropped Forged Head From Alloy Steel Finished in Black with Polished Face, Cheeks, and Pein ■■ Hollow Core Fiberglass Handle Provides Better Balance, Absorbs Shock Better Than Solid Fiberglass ■■ Permanent Bond Between Head and Handle ■■ Comfortable Black Cushion Grip ■■ Meets or Exceeds US Federal Spec. GGG-H-86C Cat. No.

UPC No.

69-404

781412694048

Packaging

Head Weight (Ounces)

Head Weight (Pounds)

Length

Face Finish

Product Weight

Shelf Pack Qty.

Bulk

8 oz

0.50 lb

12.500 in

Polished

1.04 lb

69-406

781412694062

Bulk

12 oz

0.75 lb

13.000 in

Polished

1.22 lb

69-408

781412694086

Bulk

16 oz

1.00 lb

13.000 in

Polished

1.57 lb

69-410

781412694109

Bulk

24 oz

1.50 lb

14.500 in

Polished

2.07 lb

69-412

781412694123

Bulk

32 oz

2.00 lb

14.750 in

Polished

2.66 lb

Ball Pein Hammers, Hickory Handle

Cat. No.

UPC No.

69-440

781412694406

Packaging

Head Weight (Ounces)

Head Weight (Pounds)

Length

Face Finish

Product Weight

Shelf Pack Qty.

Bulk

2 oz

0.12 lb

10.250 in

Polished

0.32 lb

69-442

781412694420

Bulk

4 oz

0.25 lb

10.250 in

Polished

0.48 lb

69-444

781412694444

Bulk

8 oz

0.50 lb

12.000 in

Polished

0.82 lb

69-446

781412694468

Bulk

12 oz

0.75 lb

12.750 in

Polished

1.18 lb

69-448

781412694482

Bulk

16 oz

1.00 lb

13.750 in

Polished

1.42 lb

69-450

781412694505

Bulk

24 oz

1.50 lb

15.250 in

Polished

2.02 lb

69-452

781412694529

Bulk

32 oz

2.00 lb

15.750 in

Polished

2.62 lb

69-454

781412694543

Bulk

40 oz

2.50 lb

16.000 in

Polished

2.99 lb

Claw Hammers, Fiberglass Handle

S T R I K I N G

S T R U C K

■■ Made in the USA - Quality and Availability ■■ Dropped Forged Head From Alloy Steel Finished in Black with Polished Face, Cheeks, and Pein ■■ Hickory Handle is Flame Treated, Clear Lacquered, and Securely Wedged Into the Hammer Head ■■ Hickory Handle Has A Contoured Shape ■■ Meets or Exceeds US Federal Spec. GGG-H-86C

1092

■■ Made in the USA - Quality and Availability ■■ Dropped Forged Head From Alloy Steel Finished in Black with Polished Face, Cheeks, and Claw ■■ Hollow Core Fiberglass Handle Provides Better Balance, Absorbs Shock Better Than Solid Fiberglass ■■ Permanent Bond Between Head and Handle ■■ Comfortable Black Cushion Grip

Cat. No.

UPC No.

69-350

781412693508

Packaging

Head Weight (Ounces)

Length

Face Finish

Product Weight

Shelf Pack Qty.

Bulk

20 oz

14.000 in

Polished

1.89 lb

H A M M E R S

Curved Claw Hammer, Hickory Handle ■■ Made in the USA - Quality and Availability ■■ Dropped Forged Head From Alloy Steel Finished in Black with Polished Face, Cheeks, and Claw ■■ Hickory Handle is Flame Treated, Clear Lacquered, and Securely Wedged Into the Hammer Head

Cat. No.

UPC No.

69-308

781412693089

Packaging

Head Weight (Ounces)

Length

Face Finish

Product Weight

Shelf Pack Qty.

Bulk

16 oz

13.000 in

Polished

1.37 lb

Hand Drilling Hammer, Hickory Handle ■■ Made in the USA - Quality and Availability ■■ Dropped Forged Head From Alloy Steel Finished in Black with Polished Face and Bevels ■■ Large Face for Striking Punches, Cold Chisels, Star Drills, Brick Chisels, Etc. ■■ Striking Face Has Substantial Bevels to Reduce the Chance of Chipping ■■ Hickory Handle is Flame Treated, Clear Lacquered, and Securely Wedged Into the Hammer Head ■■ Meets or Exceeds US Federal Spec. GGG-H-86C Cat. No.

UPC No.

69-605

781412696059

Head Weight (Ounces)

Head Weight (Pounds)

Length

Face Diameter

Product Weight

Shelf Pack Qty.

Bulk

48 oz

3 lb

10.5 in

1.250 in

3.40 lb

Face Diameter

Product Weight

Shelf Pack Qty.

Packaging

Cross Pein Hammers, Hickory Handle

Packaging

Head Weight (Ounces)

Head Weight (Pounds)

Length

69-621

781412696219

Bulk

69-623

781412696233

Bulk

32 oz

2.0 lb

14 in

1.250 in

2.20 lb

40 oz

2.5 lb

15 in

1.344 in

2.74 lb

69-625

781412696257

Bulk

48 oz

3 lb

16 in

1.438 in

3.55 lb

S T R U C K

UPC No.

Cat. No.

S T R I K I N G

■■ Made in the USA - Quality and Availability ■■ Dropped Forged Head From Alloy Steel Finished in Black with Polished Face, Bevels, and Pein ■■ Large Face for Striking Unhardened Metals. Cross Pein for Shaping Soft Metals. ■■ Striking Face and Ends of Pein Have Substantial Bevels to Reduce the Chance of Chipping ■■ Hickory Handle is Flame Treated, Clear Lacquered, and Securely Wedged Into the Hammer Head ■■ Meets or Exceeds US Federal Spec. GGG-H-86C

1093

H A M M E R S

Double Face Sledge Hammers, Hickory Handle ■■ Made in the USA - Quality and Availability ■■ Dropped Forged Head From Alloy Steel Finished in Black with Polished Face and Bevels ■■ Large Face Commonly Used with Slugging / Striking Wrenches, Stone, Concrete, and Metal ■■ Striking Face Has Substantial Bevels to Reduce the Chance of Chipping ■■ Hickory Handle is Flame Treated, Clear Lacquered, and Securely Wedged Into the Hammer Head ■■ Meets or Exceeds ASME B173.3 Cat. No.

UPC No.

Packaging

Face Diameter

Handle Length

Weight

Product Weight

Shelf Pack Qty.

69-643

781412696431

Bulk

1.375 in

15.500

2-1/2 lb

2.88 lb

69-645

781412696455

Bulk

1.500 in

16.000

3 lb

3.48 lb

69-647

781412696479

Bulk

1.750 in

16.000

4 lb

4.50 lb

69-649

781412696493

Bulk

2.125 in

36.000

6 lb

9.28 lb

69-651

781412696516

Bulk

2.250 in

36.000

8 lb

9.00 lb

69-653

781412696530

Bulk

2.500 in

36.000

10 lb

11.00 lb

69-655

781412696554

Bulk

2.625 in

36.000

12 lb

13.00 lb

S T R I K I N G

S T R U C K

Dead Blow Ball Pein Hammers

1094

■■ Made in the USA - Quality and Availability ■■ Steel Shot Filled Canister Creates a Dead Blow Effect; Sustains Impact, Maximizes Force , Reduces / Eliminates Rebound, and Absorbs the Shock of Impact ■■ Hot Cast Urethane Covers Steel Shot Chamber and Steel Reinforced Handle ■■ Steel Face and Pein Allow for Conventional Use in Striking Punches and Chisels as well as Shaping and Straightening Unhardened Metals ■■ Steel Reinforced Handle Provides Added Strength and Safety By Resisting Breaking on Overstrike ■■ Textured Handle with a Flanged Butt End for a Sure Non-Slip Grip ■■ Safety Red Urethane for High Visibility Cat. No.

UPC No.

Packaging

Length

Head Length

Face Diameter

Face Finish

Product Weight

Shelf Pack Qty.

68-516

781412685169

Bulk

12.750 in

4.188 in

1.000 in

Polished

1.00 lb

68-524

781412685244

Bulk

13.000 in

4.500 in

1.250 in

Polished

1.50 lb

68-532

781412685329

Bulk

13.625 in

4.812 in

1.375 in

Polished

2.90 lb

68-540

781412685404

Bulk

16.500 in

4.812 in

1.375 in

Polished

2.50 lb

H A M M E R S

Standard Head One-Piece Dead Blow Hammers ■■ Made in the USA - Quality and Availability ■■ Steel Shot Filled Canister Creates A Dead Blow Effect; Sustains Impact, Maximizes Force , Reduces / Eliminates Rebound, and Absorbs the Shock of Impact ■■ Non-Sparking Hot Cast Urethane Covers Steel Shot Chamber and Steel Reinforced Handle; No Exposed Metal ■■ Hot Cast Urethane Face Will Not Mar Surfaces or Absorb Liquids. Resists Chipping and Splitting While Reducing Noise When Striking Metal Objects ■■ Steel Reinforced Handle Provides Added Strength and Safety By Resisting Breaking on Overstrike ■■ Textured Handle with a Flanged Butt End for a Sure Non-Slip Grip ■■ Safety Red Urethane for High Visibility ■■ Meets or Exceeds US Federal Spec. GGG-H-33A Cat. No.

UPC No.

Packaging

Length

Head Length

Face Diameter

69-530

781412695304

Bulk

69-531

781412695311

Bulk

69-532

781412695328

Bulk

69-533

781412695335

Bulk

69-534

781412695342

Bulk

15.250 in

Face Finish

Product Weight

Shelf Pack Qty.

10.125 in

3.125 in

1.250 in

Urethane

0.10 lb

11.250 in

3.750 in

1.750 in

Urethane

1.75 lb

12.750 in

4.125 in

2.000 in

Urethane

1.68 lb

14.375 in

4.625 in

2.250 in

Urethane

2.62 lb

5.375 in

2.750 in

Urethane

3.40 lb

Slimline One-Piece Dead Blow Hammers 13

■■ Made in the USA - Quality and Availability ■■ Steel Shot Filled Canister Creates A Dead Blow Effect; Sustains Impact, Maximizes Force , Reduces / Eliminates Rebound, and Absorbs the Shock of Impact ■■ Non-Sparking Hot Cast Urethane Covers Steel Shot Chamber and Steel Reinforced Handle; No Exposed Metal ■■ Unique Slim Profile Hot Cast Urethane Face Will Not Mar Surfaces or Absorb Liquids. Resists Chipping and Splitting While Reducing Noise When Striking Metal Objects ■■ Steel Reinforced Handle Provides Added Strength and Safety By Resisting Breaking on Overstrike ■■ Textured Handle with a Flanged Butt End for a Sure Non-Slip Grip ■■ Safety Red Urethane for High Visibility ■■ Meets or Exceeds US Federal Spec. GGG-H-33A Length

Head Length

Face Diameter

Face Finish

Product Weight

Shelf Pack Qty.

Bulk

9.375 in

2.875 in

0.875 in

Urethane

0.52 lb

69-541

781412695410

Bulk

10.625 in

4.187 in

1.250 in

Urethane

0.00 lb

69-542

781412695427

Bulk

12.125 in

4.250 in

1.500 in

Urethane

1.75 lb

69-543

781412695434

Bulk

12.125 in

5.187 in

1.750 in

Urethane

1.30 lb

S T R U C K

Packaging

781412695403

UPC No.

69-540

S T R I K I N G

Cat. No.

1095

H A M M E R S

Deep Throat One-Piece Dead Blow Hammers ■■ Made in the USA - Quality and Availability ■■ Steel Shot Filled Canister Creates A Dead Blow Effect; Sustains Impact, Maximizes Force , Reduces / Eliminates Rebound, and Absorbs the Shock of Impact ■■ Non-Sparking Hot Cast Urethane Covers Steel Shot Chamber and Steel Reinforced Handle; No Exposed Metal ■■ Unique Super Slim, Super Deep Profile Hot Cast Urethane Face is Designed for Used in Cylinder / Pistons and Will Not Mar Surfaces or Absorb Liquids. Resists Chipping and Splitting While Reducing Noise When Striking Metal Objects ■■ Meets or Exceeds US Federal Spec. GGG-H-33A Cat. No.

UPC No.

69-547

781412695472

Packaging

Length

Head Length

Face Diameter

Face Finish

Product Weight

Shelf Pack Qty.

Bulk

12.875 in

8.500 in

1.750 in

Urethane

3.30 lb

Sledge Head One-Piece Dead Blow Hammers

Cat. No.

UPC No.

/ S T R I K I N G

1096

Packaging

Length

Head Length

Face Diameter

Face Finish

Product Weight

Shelf Pack Qty.

69-550

781412695502

Bulk

20.000 in

7.000 in

2.750 in

Urethane

5.47 lb

69-551

781412695519

Bulk

30.000 in

7.000 in

2.750 in

Urethane

9.99 lb

69-552

781412695526

Bulk

30.000 in

8.000 in

3.250 in

Urethane

10.86 lb

69-554

781412695540

Bulk

36.000 in

8.000 in

3.250 in

Urethane

11.50 lb

S T R U C K

■■ Made in the USA - Quality and Availability ■■ Steel Shot Filled Canister Creates A Dead Blow Effect; Sustains Impact, Maximizes Force , Reduces / Eliminates Rebound, and Absorbs the Shock of Impact ■■ Non-Sparking Hot Cast Urethane Covers Steel Shot Chamber and Steel Reinforced Handle; No Exposed Metal ■■ Hot Cast Urethane Sledge Head Face Will Not Mar Surfaces or Absorb Liquids. Resists Chipping and Splitting While Reducing Noise When Striking Metal Objects Such As Slugging / Striking Wrenches ■■ Meets or Exceeds US Federal Spec. GGG-H-33A

Powerdrive Dead Blow Hammers, Fiberglass Handle ■■ Made in the USA - Quality and Availability ■■ Steel Shot Filled Canister Creates a Dead Blow Effect; Sustains Impact, Maximizes Force , Reduces / Eliminates Rebound, and Absorbs the Shock of Impact ■■ Non-Sparking Thermoplastic Head Material Covers Steel Shot Chamber and Will Not Mar Surfaces ■■ Fiberglass Handle Provides Balance and is Permanently Bonded to the Head ■■ Comfortable Black Cushion Grip ■■ Meets or Exceeds US Federal Spec. GGG-H-33A Cat. No.

UPC No.

Packaging

Length

Face Diameter

69-501 69-503

781412695014

Bulk

18.630 in

1.875 in

781412695038

Bulk

18.630 in

2.125 in

Face Finish

Product Weight

Shelf Pack Qty.

Urethane

1.40 lb

Urethane

1.90 lb

69-505

781412695052

Bulk

18.630 in

2.375 in

Urethane

2.48 lb

69-507

781412695076

Bulk

18.630 in

2.625 in

Urethane

3.31 lb

H A M M E R S

Rubber Mallet, Fiberglass Handle ■■ Made in the USA - Quality and Availability ■■ Solid, Non-Sparking, Non-Marring Rubber Head ■■ Fiberglass Handle Provides Balance and is Permanently Bonded to the Head ■■ Comfortable Black Cushion Grip ■■ Meets or Exceeds US Federal Spec. GGG-H-33A

Cat. No.

UPC No.

69-490

781412694901

Packaging

Length

Head Length

Product Weight

Shelf Pack Qty.

Bulk

1.630 in

3.875 in

1.72 lb

Brass Hammers, Fiberglass Handle ■■ Made in the USA - Quality and Availability ■■ Soft Brass Head is Non-Sparking, Surface Protective to Prevent Work Surface Damage ■■ Ideal for Driving Bushings and Gears As Well As Near Combustible Materials ■■ Striking Face is Machined Flat for Even Blow Distribution ■■ Fiberglass Handle Provides Balance and is Permanently Bonded to the Head ■■ Comfortable Black Cushion Grip ■■ Meets or Exceeds US Federal Spec. GGG-H-33A UPC No.

Packaging

Length

69-513 69-515 69-517

Face Diameter

Handle Length

781412695137

Bulk

781412695151

Bulk

781412695175

Bulk

Product Weight

Shelf Pack Qty.

16.000 in

1.063 in

12.000 in

2.09 lb

16.000 in

1.500 in

12.000 in

2.84 lb

16.000 in

1.875 in

12.000 in

3.84 lb

Cat. No.

Brass Hammers, Hickory Handle S T R I K I N G

■■ Made in the USA - Quality and Availability ■■ Soft Brass Head is Non-Sparking, Surface Protective to Prevent Work Surface Damage ■■ Ideal for Driving Bushings and Gears As Well As Near Combustible Materials ■■ Striking Face is Machined Flat for Even Blow Distribution ■■ Hickory Handle is Flame Treated, Clear Lacquered, and Securely Wedged Into the Hammer Head Packaging

Length

Face Diameter

Handle Length

Product Weight

Shelf Pack Qty.

781412811100

Bulk

10.500 in

1.000 in

10.500 in

0.66 lb

81-111

781412811117

Bulk

10.500 in

1.250 in

10.500 in

1.17 lb

81-112

781412811124

Bulk

13.000 in

1.500 in

13.000 in

2.42 lb

S T R U C K

UPC No.

81-110

Cat. No.

1097

H A M M E R S

Copper Hammers, Hickory Handle ■■ Made in the USA - Quality and Availability ■■ Soft Copper Head is Non-Sparking, Surface Protective to Prevent Work Surface Damage ■■ Ideal for Driving Bushings and Gears As Well As Near Combustible Materials ■■ Striking Face is Machined Flat for Even Blow Distribution ■■ Hickory Handle is Flame Treated, Clear Lacquered, and Securely Wedged Into the Hammer Head Cat. No.

UPC No.

Packaging

Length

Face Diameter

Handle Length

Product Weight

Shelf Pack Qty.

69-480

781412694802

Bulk

13.438 in

1.250 in

11.250 in

0.00 lb

69-485

781412694857

Bulk

13.500 in

1.630 in

11.250 in

2.37 lb

Soft Face Hammers, Fiberglass Handle

Cat. No.

UPC No.

Head Length

Thread Size

Handle Length

69-001

781412690019

69-003

781412690033

Bulk

2 in

1/4-20

Bulk

2.000 in

1/4-20

69-009

781412690095

69-011

781412690118

Bulk

2.375 in

5/16-18

Bulk

4.500 in

5/16-18

69-013

781412690132

Bulk

2.375 in

69-017

781412690170

Bulk

69-019

781412690194

Bulk

S T R I K I N G

1098

Packaging

Product Weight

Shelf Pack Qty.

11.375 in

0.37 lb

11.375 in

0.50 lb

13.000 in

0.47 lb

13.000 in

0.00 lb

5/16-18

13.000 in

1.06 lb

2.500 in

3/8-16

13.000 in

1.10 lb

2.500 in

3/8-16

13.000 in

1.75 lb

69-025

781412690255

Bulk

3.250 in

7/16-14

15.000 in

1.76 lb

69-027

781412690279

Bulk

3.250 in

7/16-14

13.000 in

3.38 lb

69-031

781412690316

Bulk

3.750 in

1/2-13

14.000 in

2.50 lb

69-033

781412690330

Bulk

3.750 in

1/2-13

14.000 in

4.85 lb

Dead Blow Soft Face Hammers, Fiberglass Handle

S T R U C K

■■ Made in the USA - Quality and Availability ■■ Hammer Heads Are Designed to Accept A Variety of Threaded Soft Face Tips to Customize to Various Applications ■■ Fiberglass Handle Provides Balance and is Permanently Bonded to the Head ■■ Comfortable Black Cushion Grip ■■ Meets or Exceeds US Federal Spec. GGG-H-33A

■■ Made in the USA - Quality and Availability ■■ Hammer Heads Are Designed to Accept A Variety of Threaded Soft Face Tips to Customize to Various Applications ■■ Steel Shot Filled Canister Creates A Dead Blow Effect; Sustains Impact, Maximizes Force , Reduces / Eliminates Rebound, and Absorbs the Shock of Impact ■■ Fiberglass Handle Provides Balance and is Permanently Bonded to the Head ■■ Comfortable Black Cushion Grip ■■ Meets or Exceeds US Federal Spec. GGG-H-33A Cat. No.

UPC No.

Packaging

Head Length

Thread Size

Handle Length

Product Weight

Shelf Pack Qty.

69-065 69-069

781412690651

Bulk

6.250 in

5/16"-18

6.250 in

1.30 lb

781412690699

Bulk

8.625 in

3/8"-16

8.625 in

1.87 lb

H A M M E R S

Soft Face Hammer Tips ■■ Made in the USA - Quality and Availability ■■ Soft Face Tips Are Color Coded to Indicate Degree of Hardness ■■ Tips Thread Directly Into Hammer Head and Seat in Head Through A Friction Fit ■■ Tips Will Not Mar Surfaces or Absorb Liquids ■■ Resists Chipping and Splitting While Reducing Noise When Striking Metal Objects ■■ Meets or Exceeds US Federal Spec. GGG-H-33A Cat. No.

UPC No.

Packaging

Diameter

Thread Size

Hardness

Color

Hardness Conversion

Product Weight

Shelf Pack Qty.

69-141

781412691412

Bagged

1.00 in

1/4-20

Super Soft

Gray

Soft Rubber

0.05 lb

69-142

781412691429

Bagged

1.00 in

1/4-20

Soft

Brown

Soft Rubber, Soft Lead, Wood

0.05 lb

69-143

781412691436

Bagged

1.00 in

1/4-20

Medium

Red

Wood, Rubber, Rawhide, Brass

0.05 lb

69-145

781412691450

Bagged

1.00 in

1/4-20

Tough

Green

Rawhide, Hardwood, Plactic, Lead

0.04 lb

69-146

781412691467

Bagged

1.00 in

1/4-20

Med. Hard

Cream

Rawhide, Hardwood, Lead

0.04 lb

69-148

781412691481

Bagged

1.00 in

1/4-20

Hard

Black

Rawhide, Plastic, Micarta, Fiber

0.04 lb

69-149

781412691498

Bagged

1.00 in

1/4-20

Extra Hard

Yellow

Rawhide, Micarta, Fiber, Copper

0.04 lb

69-151

781412691511

Bagged

1.50 in

5/16-18

Super Soft

Gray

Soft Rubber

0.09 lb

69-152

781412691528

Bagged

1.50 in

5/16-18

Soft

Brown

Soft Rubber, Soft Lead, Wood

0.09 lb

69-153

781412691535

Bagged

1.50 in

5/16-18

Medium

Red

Wood, Rubber, Rawhide, Brass

0.20 lb

69-155

781412691559

Bagged

1.50 in

5/16-18

Tough

Green

Rawhide, Hardwood, Plactic, Lead

0.10 lb

69-156

781412691566

Bagged

1.50 in

5/16-18

Med. Hard

Cream

Rawhide, Hardwood, Lead

0.09 lb

69-158

781412691580

Bagged

1.50 in

5/16-18

Hard

Black

Rawhide, Plastic, Micarta, Fiber

0.09 lb

69-159

781412691597

Bagged

1.50 in

5/16-18

Extra Hard

Yellow

Rawhide, Micarta, Fiber, Copper

1.48 lb

781412691610

Bagged

2.00 in

3/8-16

Super Soft

Gray

Soft Rubber

0.20 lb

781412691627

Bagged

2.00 in

3/8-16

Soft

Brown

Soft Rubber, Soft Lead, Wood

0.20 lb

69-163

781412691634

Bagged

2.00 in

3/8-16

Medium

Red

Wood, Rubber, Rawhide, Brass

0.21 lb

69-165

781412691658

Bagged

2.00 in

3/8-16

Tough

Green

Rawhide, Hardwood, Plactic, Lead

0.22 lb

69-166

781412691665

Bagged

2.00 in

3/8-16

Med. Hard

Cream

Rawhide, Hardwood, Lead

0.10 lb

69-168

781412691689

Bagged

2.00 in

3/8-16

Hard

Black

Rawhide, Plastic, Micarta, Fiber

0.21 lb

69-169

781412691696

Bagged

2.00 in

3/8-16

Extra Hard

Yellow

Rawhide, Micarta, Fiber, Copper

0.21 lb

781412691719

Bagged

2.50 in

7/16-14

Super Soft

Gray

Soft Rubber

0.34 lb

781412691726

Bagged

2.50 in

7/16-14

Soft

Brown

Soft Rubber, Soft Lead, Wood

0.34 lb

69-173

781412691733

Bagged

2.50 in

7/16-14

Medium

Red

Wood, Rubber, Rawhide, Brass

0.34 lb

69-175

781412691757

Bagged

2.50 in

7/16-14

Tough

Green

Rawhide, Hardwood, Plactic, Lead

0.39 lb

69-176

781412691764

Bagged

2.50 in

7/16-14

Med. Hard

Cream

Rawhide, Hardwood, Lead

0.34 lb

781412691788

Bagged

2.50 in

7/16-14

Hard

Black

Rawhide, Plastic, Micarta, Fiber

0.34 lb

781412691795

Bagged

2.50 in

7/16-14

Extra Hard

Yellow

Rawhide, Micarta, Fiber, Copper

0.34 lb

781412691818

Bagged

3.00 in

1/2-13

Super Soft

Gray

Soft Rubber

0.59 lb

781412691825

Bagged

3.00 in

1/2-13

Soft

Brown

Soft Rubber, Soft Lead, Wood

0.59 lb

69-183

781412691832

Bagged

3.00 in

1/2-13

Medium

Red

Wood, Rubber, Rawhide, Brass

0.59 lb

69-185

781412691856

Bagged

3.00 in

1/2-13

Tough

Green

Rawhide, Hardwood, Plactic, Lead

0.59 lb

69-186

781412691863

Bagged

3.00 in

1/2-13

Med. Hard

Cream

Rawhide, Hardwood, Lead

0.59 lb

69-188

781412691887

Bagged

3.00 in

1/2-13

Hard

Black

Rawhide, Plastic, Micarta, Fiber

0.59 lb

69-189

781412691894

Bagged

3.00 in

1/2-13

Extra Hard

Yellow

Rawhide, Micarta, Fiber, Copper

0.59 lb

S T R U C K

69-181 69-182

69-178 69-179

S T R I K I N G

69-171 69-172

69-161 69-162

1099

H A M M E R S

Hammer Set

■■ Popular starter set of Hammers and mallets ■■ Soft face, Rubber Mallet, Drilling Hammer and Ball Pein ■■ Precision Hardened Striking Face ■■ Durable Storage Tray ■■ Fiberglass Handle ■■ Molded Comfort Grip Handle ■■ 5-Piece Hammer Set

Cat. No.

UPC No.

82303

099575823039

Product Weight

Shelf Pack Qty.

11.53 lb

Cat. No.

Description

Cat. No.

Description

82251

16 oz Ball Pein Hammer - Fiberglass

82259

16 oz Rubber Mallet - Wood Hickory Handle

82255

3 lb Drilling Hammer

82260

12 oz Soft face Hammer, Removable Caps

82256

16 oz Dead Blow Hammer - Composite Handle

Ball Pein Hammers

S T R I K I N G

S T R U C K

■■ Comfortable Black Cushion Grip ■■ Dropped Forged Head From Alloy Steel Finished in Black with Polished Face, Cheeks, and Pein ■■ Meets or Exceeds ASME B107.400-2008

1100

Cat. No.

UPC No.

82250

099575822506

Packaging

Head Weight (Ounces)

Head Weight (Pounds)

Length

Face Finish

Product Weight

Shelf Pack Qty.

Bulk

8.0 oz

0.5 lb

11.8 in

Polished

0.80 lb

82251

099575822513

Bulk

16.0 oz

1.0 lb

13.7 in

Polished

1.50 lb

82252

099575822520

Bulk

24.0 oz

1.5 lb

15.59 in

Polished

2.19 lb

82253

099575822537

Bulk

32.0 oz

1.9 lb

15.74 in

Polished

2.62 lb

■■ For Driving Nails ■■ All Types of General Construction ■■ Not for Punches and Chisels

Cat. No.

UPC No.

82254

099575822544

Curved Claw Hammer - Fiberglass

Packaging

Head Weight (Ounces)

Length

Face Finish

Product Weight

Shelf Pack Qty.

Bulk

16 oz

12.87 in

Polished

12.75 lb

H A M M E R S

Drilling Hammer

■■ Heavy Duty Uses with Punches, Chisels, and Star Drills

Cat. No.

UPC No.

82255

099575822551

Packaging

Head Weight (Ounces)

Head Weight (Pounds)

Length

Face Diameter

Product Weight

Shelf Pack Qty.

Bulk

48 oz

3 lb

10.51 in

1.38 in

3.52 lb

Engineer's Hammer

■■ Forged Steel Alloy Head ■■ Fully Polished Face ■■ Precision Hardened Striking Face ■■ Fiberglass Handle ■■ Comfort Grip Handle ■■ Meets or Exceeds ASME B107.54

Cat. No.

UPC No.

82289

099575822896

Head Weight (Ounces)

Head Weight (Pounds)

Length

Face Diameter

Product Weight

Shelf Pack Qty.

Bulk

48 oz

3 lb

10.31 in

1.09 in

3.73 lb

Face Finish

Product Weight

Shelf Pack Qty.

Packaging

Dead Blow Hammers

■■ Composite Handle ■■ Assembly, Maintenance, Production Applications

UPC No.

Packaging

Head Weight (Ounces)

Head Length

Face Diameter

Bulk

16 oz

3.5 in

1.6 in

Composite

1.13 lb

Bulk

32 oz

4.3 in

2.0 in

Composite

2.12 lb

82258

099575822582

Bulk

48 oz

5.0 in

2.4 in

Composite

3.05 lb

S T R U C K

099575822568 099575822575

82256 82257

S T R I K I N G

Cat. No.

1101

H A M M E R S

Rubber Mallet - Wood Hickory Handle

■■ Solid Hickory Handle

Cat. No.

UPC No.

82259

099575822599

Packaging

Head Weight (Ounces)

Product Weight

Shelf Pack Qty.

Bulk

16 oz

1.22 lb

Soft Face Hammer

■■ Light Assembly Applications ■■ Comfortable Black Cushion Grip

UPC No.

82260

099575822605

Packaging

Head Weight (Ounces)

Head Length

Thread Size

Handle Length

Product Weight

Shelf Pack Qty.

Bulk

12 oz

4 in

5/16-18

11 in

1.11 lb

■■ General Body Tool and Dolly Set ■■ Hickory Handles ■■ Fine Polished Surfaces on Dollys ■■ Soft and Cross Faced Striking Surfaces ■■ Includes a Storage Case

Body Tool Set

S T R I K I N G

S T R U C K

Cat. No.

1102

Cat. No.

UPC No.

Packaging

Product Weight

Shelf Pack Qty.

82302

099575823022

Carry Case

12.35 lb

Cat. No.

Description

Cat. No.

Description

Smooth Faced Bumping Hammer W/ Square & Round Face

Toe Dolly

Smooth Faced Cross Chisel Hammer

Wedge Dolly

Crossed Face Shrinking Hammer

Heel Dolly

General Purpose Dolly

P U N C H E S

C H I S E L S

27 Pc. Punch and Chisel Set

Made in the USA - Quality and Availability Manufactured From High Alloy Steel for Strength and Durability Heat Treated for Strength and Durability Cutting Edges and Tips Are Ground to Precise Angles and Tolerances for Performance and Long Life ■ Black Oxide Finish and Visible "Wear Safety Goggles" Reminder ■ Hex Stock Fits More Securely in A Punch & Chisel Holder and Also Reduces the Tendency to Roll on Work Surfaces ■ ■ ■ ■

Cat. No.

UPC No.

70-568

781412705683

Packaging

Product Weight

Shelf Pack Qty.

Boxed

9.84 lb

Cat. No.

Description

Cat. No.

Description

Cat. No.

Description

70-103

Pin Punch 3/32" x 5/16" x 4-3/4"

70-197

Drift Punch 1/4" x 5/8" x 11"

70-309

Cold Chisel 1/2" x 7/16" x 6"

70-105

Pin Punch 1/8" x 5/16" x 5"

70-129

Pin Punch 7/32" x 3/8" x 7"

70-311

Cold Chisel 5/8" x 1/2" x 6-1/2"

70-107

Pin Punch 5/32" x 5/16" x 5-1/4"

70-163

Starting Punch 7/32" x 1/2" x 5-1/2"

70-313

Cold Chisel 3/4" x 5/8" x 7"

70-109

Pin Punch 3/16" x 3/8" x 5-1/4"

70-189

Drift Punch 1/8" x 3/8" x 8"

70-315

Cold Chisel 7/8" x 3/4" x 7-1/2"

70-131

Pin Punch 1/4" x 3/8" x 7"

70-235

Center Punch 3/8" x 5"

70-317

Cold Chisel 1" x 7/8" x 8"

70-155

Starting Punch 3/32" x 5/16" x 4-1/2"

70-239

Center Punch 1/2" x 6"

70-319

Cold Chisel 1-1/8" x 7/8" x 8"

70-157

Starting Punch 1/8" x 5/16" x 4-1/2"

70-255

Prick Punch 3/8" x 5"

70-000

Punch and Chisel Holder

70-161

Starting Punch 3/16" x 3/8" x 5"

70-301

Cold Chisel 1/4" x 1/4" x 5"

29-403

Vinyl Roll 27 Pockets

70-165

Starting Punch 1/4" x 1/2" x 6"

70-303

Cold Chisel 1/4" x 1/4" x 5"

70-193

Drift Punch 3/16" x 1/2" x 9"

70-305

Cold Chisel 3/8" x 5/16" x 5-1/8"

19 Pc. Punch and Chisel Set

S T R I K I N G

■ ■ ■ ■

UPC No.

70-567

781412705676

Cat. No.

Description

Packaging

Product Weight

Shelf Pack Qty.

Boxed

9.10 lb

Cat. No.

Description

Cat. No.

Description

70-103

Pin Punch 3/32" x 5/16" x 4-3/4"

70-165

Starting Punch 1/4" x 1/2" x 6"

70-311

Cold Chisel 5/8" x 1/2" x 6-1/2"

70-105

Pin Punch 1/8" x 5/16" x 5"

70-193

Drift Punch 3/16" x 1/2" x 9"

70-313

Cold Chisel 3/4" x 5/8" x 7"

70-109

Pin Punch 3/16" x 3/8" x 5-1/4"

70-197

Drift Punch 1/4" x 5/8" x 11"

70-315

Cold Chisel 7/8" x 3/4" x 7-1/2"

70-131

Pin Punch 1/4" x 3/8" x 7"

70-199

Drift Punch 5/16" x 5/8" x 11"

70-317

Cold Chisel 1" x 7/8" x 8"

70-155

Starting Punch 3/32" x 5/16" x 4-1/2"

70-201

Drift Punch 3/8" x 3/4" x 11"

70-000

Punch and Chisel Holder

29-402

Vinyl Roll 19 Pockets

70-157

Starting Punch 1/8" x 5/16" x 4-1/2"

70-239

Center Punch 1/2" x 6"

70-161

Starting Punch 3/16" x 3/8" x 5"

70-309

Cold Chisel 1/2" x 7/16" x 6"

S T R U C K

Cat. No.

1103 13_StrikingStruck_04_ARM_Punches.indd 1103

2/15/13 3:35 PM

P U N C H E S

C H I S E L S

12 Pc. Punch and Chisel Set

Cat. No.

UPC No.

70-565

781412705652

Packaging

Product Weight

Shelf Pack Qty.

Boxed

1.64 lb

Cat. No.

Description

Cat. No.

Description

Cat. No.

70-103

Pin Punch 3/32" x 5/16" x 4-3/4"

70-161

Starting Punch 3/16" x 3/8" x 5"

70-393

Cape Chisel 7/32" x 5/16" x 5-5/8"

70-105

Pin Punch 1/8" x 5/16" x 5"

70-235

Center Punch 3/8" x 5"

70-421

Diamond Point Chisel 3/16" x 3/8" x 5-1/2"

29-404

Vinyl Roll 12 Pockets

70-109

Pin Punch 3/16" x 3/8" x 5-1/4"

70-303

Cold Chisel 1/4" x 1/4" x 5"

70-153

Starting Punch 1/16" x 5/16" x 4-1/2"

70-307

Cold Chisel 7/16" x 3/8" x 6"

70-157

Starting Punch 1/8" x 5/16" x 4-1/2"

70-309

Cold Chisel 1/2" x 7/16" x 6"

Description

Cat. No.

UPC No.

70-560

781412705607

S T R I K I N G

S T R U C K

5 Pc. Tool Steel Cold Chisel Set

■ Made in the USA - Quality and Availability ■ Manufactured From Shock Resistant Tool Steel for Unequalled Strength, Toughness, and Durability; Higher Hardness Without Brittleness ■ Full Shank Heat Treat is A 2 Step Process Where the Entire Length of the Tool is Hardened and Tempered, Then the Struck End is Drawn Back for to Resist Mushrooming" and "Chipping" Extending the Life of the Tool" ■ Cutting Edges Are Ground to Precise Angles for Efficient Cutting and Long Live ■ Modified Parabolic Head Directs the Striking Force to the Center of the Tool for Greater Resistance to "Mushrooming" and "Chipping" ■ Black Oxide Finish and Visible "Wear Safety Goggles" Reminder ■ Hex Stock Fits More Securely in A Punch & Chisel Holder and Also Reduces the Tendency to Roll on Work Surfaces

Cat. No.

Description

Packaging

Product Weight

Shelf Pack Qty.

Boxed

2.64 lb

Cat. No.

Description

70-325

Tool Steel Cold Chisel 3/8" x 5/16" x 5-1/2"

70-333

Tool Steel Cold Chisel 3/4" x 5/8" x 7"

70-329

Tool Steel Cold Chisel 1/2" x 7/16" x 6"

70-335

Tool Steel Cold Chisel 7/8" x 3/4" x 7-1/2"

70-331

Tool Steel Cold Chisel 5/8" x 1/2" x 6-1/2"

29-407

Vinyl Roll 5 Pockets

1104 13_StrikingStruck_04_ARM_Punches.indd 1104

2/15/13 3:35 PM

P U N C H E S

C H I S E L S

10 Pc. Cold Chisel Set

Made in the USA - Quality and Availability Manufactured From High Alloy Steel for Strength and Durability Heat Treated for Strength and Durability Cutting Edges Are Ground to Precise Angles for Efficient Cutting and Long Life ■ Black Oxide Finish and Visible "Wear Safety Goggles" Reminder ■ Hex Stock Fits More Securely in A Punch & Chisel Holder and Also Reduces the Tendency to Roll on Work Surfaces ■ ■ ■ ■

Cat. No.

UPC No.

70-563

781412705638

Packaging

Product Weight

Shelf Pack Qty.

Boxed

5.50 lb

Cat. No.

Description

Cat. No.

Description

Cat. No.

Description

70-301

Cold Chisel 1/4" x 1/4" x 5"

70-309

Cold Chisel 1/2" x 7/16" x 6"

70-317

Cold Chisel 1" x 7/8" x 8"

70-303

Cold Chisel 1/4" x 1/4" x 5"

70-311

Cold Chisel 5/8" x 1/2" x 6-1/2"

70-319

Cold Chisel 1-1/8" x 7/8" x 8"

70-305

Cold Chisel 3/8" x 5/16" x 5-1/8"

70-313

Cold Chisel 3/4" x 5/8" x 7"

29-405

Vinyl Roll 10 Pockets

70-307

Cold Chisel 7/16" x 3/8" x 6"

70-315

Cold Chisel 7/8" x 3/4" x 7-1/2"

7 Pc. Cold Chisel Set

Packaging

Product Weight

Shelf Pack Qty.

70-562

781412705621

Boxed

2.80 lb

Cat. No.

Description

Cat. No.

Description

70-303

Cold Chisel 1/4" x 1/4" x 5"

70-311

Cold Chisel 5/8" x 1/2" x 6-1/2"

70-305

Cold Chisel 3/8" x 5/16" x 5-1/8"

70-313

Cold Chisel 3/4" x 5/8" x 7"

70-307

Cold Chisel 7/16" x 3/8" x 6"

70-315

Cold Chisel 7/8" x 3/4" x 7-1/2"

70-309

Cold Chisel 1/2" x 7/16" x 6"

29-406

Vinyl Roll 7 Pockets

UPC No.

S T R I K I N G

Cat. No.

S T R U C K

1105 13_StrikingStruck_04_ARM_Punches.indd 1105

2/15/13 3:36 PM

P U N C H E S

C H I S E L S

5 Pc. Cold Chisel Set

Cat. No.

UPC No.

70-564

781412705645

Packaging

Product Weight

Shelf Pack Qty.

Boxed

1.16 lb

Cat. No.

Description

Cat. No.

Description

70-303

Cold Chisel 1/4" x 1/4" x 5"

70-309

Cold Chisel 1/2" x 7/16" x 6"

70-305

Cold Chisel 3/8" x 5/16" x 5-1/8"

70-311

Cold Chisel 5/8" x 1/2" x 6-1/2"

70-307

Cold Chisel 7/16" x 3/8" x 6"

29-407

Vinyl Roll 5 Pockets

19 Pc. Punch Set

Made in the USA - Quality and Availability Manufactured From High Alloy Steel for Strength and Durability Heat Treated for Strength and Durability Various Punch Tips Are Precision Ground for Specific Performance and Long Life ■ Black Oxide Finish and Visible "Wear Safety Goggles" Reminder ■ Hex Stock Fits More Securely in A Punch & Chisel Holder and Also Reduces the Tendency to Roll on Work Surfaces

S T R I K I N G

S T R U C K

■ ■ ■ ■

Cat. No.

UPC No.

70-550

781412705508

Packaging

Product Weight

Shelf Pack Qty.

Boxed

5.30 lb

Cat. No.

Description

Cat. No.

Description

Cat. No.

Description

29-401

Vinyl Roll 19 Pockets

70-157

Starting Punch 1/8" x 5/16" x 4-1/2"

70-193

Drift Punch 3/16" x 1/2" x 9"

70-103

Pin Punch 3/32" x 5/16" x 4-3/4"

70-159

Starting Punch 5/32" x 3/8" x 5"

70-197

Drift Punch 1/4" x 5/8" x 11"

70-105

Pin Punch 1/8" x 5/16" x 5"

70-161

Starting Punch 3/16" x 3/8" x 5"

70-235

Center Punch 3/8" x 5"

70-107

Pin Punch 5/32" x 5/16" x 5-1/4"

70-165

Starting Punch 1/4" x 1/2" x 6"

70-239

Center Punch 1/2" x 6"

70-109

Pin Punch 3/16" x 3/8" x 5-1/4"

70-167

Starting Punch 5/16" x 1/2" x 6"

70-255

Prick Punch 3/8" x 5"

70-131

Pin Punch 1/4" x 3/8" x 7"

70-133

Pin Punch 5/16" x 7/16" x 7"

70-000

Punch and Chisel Holder

70-155

Starting Punch 3/32" x 5/16" x 4-1/2"

70-189

Drift Punch 1/8" x 3/8" x 8"

1106 13_StrikingStruck_04_ARM_Punches.indd 1106

2/15/13 3:36 PM

P U N C H E S

C H I S E L S

10 Pc. Tool Steel Pin Punch Set

■ Made in the USA - Quality and Availability ■ Manufactured From Shock Resistant Tool Steel for Unequalled Strength, Toughness, and Durability; Higher Hardness Without Brittleness ■ Full Shank Heat Treat is A 2 Step Process Where the Entire Length of the Tool is Hardened and Tempered, Then the Struck End is Drawn Back for to Resist Mushrooming" and "Chipping" Extending the Life of the Tool" ■ Pin Area Precision Ground to Prevent Any "Binding" in Work Area ■ Modified Parabolic Head Directs the Striking Force to the Center of the Tool for Greater Resistance to "Mushrooming" and "Chipping" ■ Black Oxide Finish and Visible "Wear Safety Goggles" Reminder ■ Hex Stock Fits More Securely in A Punch & Chisel Holder and Also Reduces the Tendency to Roll on Work Surfaces Cat. No.

UPC No.

70-552

781412705522

Packaging

Product Weight

Shelf Pack Qty.

Boxed

2.005 lb

Cat. No.

Description

Cat. No.

Description

Cat. No.

Description

70-110

Tool Steel Pin Punch 1/16" x 1/4" x 4"

70-118

Tool Steel Pin Punch 3/16" x 3/8" x 5-1/4"

70-126

Tool Steel Pin Punch 5/16" x 7/16" x 6"

70-112

Tool Steel Pin Punch 3/32" x 5/16" x 4-1/2"

70-120

Tool Steel Pin Punch 7/32" x 3/8" x 5-1/2"

70-128

Tool Steel Pin Punch 3/8" x 1/2" x 6"

70-114

Tool Steel Pin Punch 1/8" x 5/16" x 4-3/4"

70-122

Tool Steel Pin Punch 1/4" x 3/8" x 5-3/4"

29-405

Vinyl Roll 10 Pockets

70-116

Tool Steel Pin Punch 5/32" x 5/16" x 5"

70-124

Tool Steel Pin Punch 9/32" x 3/8" x 5-3/4"

7 Pc. Tool Steel Pin Punch Set 13

■ Made in the USA - Quality and Availability ■ Manufactured From Shock Resistant Tool Steel for Unequalled Strength, Toughness, and Durability; Higher Hardness Without Brittleness ■ Full Shank Heat Treat is A 2 Step Process Where the Entire Length of the Tool is Hardened and Tempered, Then the Struck End is Drawn Back for to Resist Mushrooming" and "Chipping" Extending the Life of the Tool" ■ Pin Area Precision Ground to Prevent Any "Binding" in Work Area ■ Modified Parabolic Head Directs the Striking Force to the Center of the Tool for Greater Resistance to "Mushrooming" and "Chipping" ■ Black Oxide Finish and Visible "Wear Safety Goggles" Reminder ■ Hex Stock Fits More Securely in A Punch & Chisel Holder and Also Reduces the Tendency to Roll on Work Surfaces

S T R I K I N G

Packaging

Product Weight

Shelf Pack Qty.

70-553

781412705539

Boxed

1.12 lb

Cat. No.

Description

Cat. No.

Description

70-110

Tool Steel Pin Punch 1/16" x 1/4" x 4"

70-118

Tool Steel Pin Punch 3/16" x 3/8" x 5-1/4"

70-112

Tool Steel Pin Punch 3/32" x 5/16" x 4-1/2"

70-120

Tool Steel Pin Punch 7/32" x 3/8" x 5-1/2"

70-114

Tool Steel Pin Punch 1/8" x 5/16" x 4-3/4"

70-122

Tool Steel Pin Punch 1/4" x 3/8" x 5-3/4"

70-116

Tool Steel Pin Punch 5/32" x 5/16" x 5"

29-406

Vinyl Roll 7 Pockets

S T R U C K

UPC No.

Cat. No.

1107 13_StrikingStruck_04_ARM_Punches.indd 1107

2/15/13 3:36 PM

P U N C H E S

C H I S E L S

5 Pc. Tool Steel Long Pin Punch Set

■ Made in the USA - Quality and Availability ■ Manufactured From Shock Resistant Tool Steel for Unequalled Strength, Toughness, and Durability; Higher Hardness Without Brittleness ■ Full Shank Heat Treat is A 2 Step Process Where the Entire Length of the Tool is Hardened and Tempered, Then the Struck End is Drawn Back for to Resist Mushrooming" and "Chipping" Extending the Life of the Tool" ■ Pin Area Precision Ground to Prevent Any "Binding" in Work Area ■ Modified Parabolic Head Directs the Striking Force to the Center of the Tool for Greater Resistance to "Mushrooming" and "Chipping" ■ Black Oxide Finish and Visible "Wear Safety Goggles" Reminder ■ Hex Stock Fits More Securely in A Punch & Chisel Holder and Also Reduces the Tendency to Roll on Work Surfaces Cat. No.

UPC No.

Packaging

Product Weight

Shelf Pack Qty.

70-556

781412705560

Boxed

1.18 lb

Cat. No.

Description

Cat. No.

Description

70-042

Tool Steel Long Pin Punch 5/32" x 5/16" x 8"

70-045

Tool Steel Long Pin Punch 1/4" x 3/8" x 8"

70-043

Tool Steel Long Pin Punch 3/16" x 3/8" x 8"

70-047

Tool Steel Long Pin Punch 5/16" x 7/16" x 8"

70-044

Tool Steel Long Pin Punch 7/32" x 3/8" x 8"

29-407

Vinyl Roll 5 Pockets

Cat. No.

UPC No.

70-554

781412705546

Cat. No.

Description

Cat. No.

Description

70-101

Pin Punch 1/16" x 1/4" x 4-1/4"

70-109

Pin Punch 3/16" x 3/8" x 5-1/4"

S T R I K I N G

S T R U C K

7 Pc. Pin Punch Set

Made in the USA - Quality and Availability Manufactured From High Alloy Steel for Strength and Durability Heat Treated for Strength and Durability Pin Area Precision Ground to Prevent Any "Binding" in Work Area ■ Black Oxide Finish and Visible "Wear Safety Goggles" Reminder ■ Hex Stock Fits More Securely in A Punch & Chisel Holder and Also Reduces the Tendency to Roll on Work Surfaces ■ ■ ■ ■

Packaging

Product Weight

Shelf Pack Qty.

Boxed

1.15 lb

70-103

Pin Punch 3/32" x 5/16" x 4-3/4"

70-129

Pin Punch 7/32" x 3/8" x 7"

70-105

Pin Punch 1/8" x 5/16" x 5"

70-131

Pin Punch 1/4" x 3/8" x 7"

70-107

Pin Punch 5/32" x 5/16" x 5-1/4"

29-406

Vinyl Roll 7 Pockets

1108 13_StrikingStruck_04_ARM_Punches.indd 1108

2/15/13 3:37 PM

P U N C H E S

C H I S E L S

7 Pc. Roll Pin Punch Set

Made in the USA - Quality and Availability Manufactured From High Alloy Steel for Strength and Durability Heat Treated for Strength and Durability Ball Area in the Center of the Tip Fits Inside the Roll Pin to Prevent Damage to the Roll Pin ■ Black Oxide Finish and Visible "Wear Safety Goggles" Reminder ■ Hex Stock Fits More Securely in A Punch & Chisel Holder and Also Reduces the Tendency to Roll on Work Surfaces ■ ■ ■ ■

Cat. No.

UPC No.

70-557

781412705577

Packaging

Product Weight

Shelf Pack Qty.

Boxed

0.68 lb

Cat. No.

Description

Cat. No.

Description

70-260

Roll Pin Punch 1/16" x 1/4" x 2-3/4"

70-268

Roll Pin Punch 3/16" x 3/8" x 4-1/2"

70-262

Roll Pin Punch 3/32" x 1/4" x 3-1/2"

70-270

Roll Pin Punch 7/32" x 3/8" x 5"

70-264

Roll Pin Punch 1/8" x 1/4" x 4"

70-272

Roll Pin Punch 1/4" x 7/16" x 5-1/2"

70-266

Roll Pin Punch 5/32" x 1/4" x 4-1/2"

29-406

Vinyl Roll 7 Pockets

5 Pc. Drift Punch Set

Made in the USA - Quality and Availability Manufactured From High Alloy Steel for Strength and Durability Heat Treated for Strength and Durability Flat Tip with Precision Ground Taper is Used for Installing and Removing Pins and Shafts and Can Also Be Used to Align Holes in Multiple Pieces of Material ■ Black Oxide Finish and Visible "Wear Safety Goggles" Reminder ■ Hex Stock Fits More Securely in A Punch & Chisel Holder and Also Reduces the Tendency to Roll on Work Surfaces ■ ■ ■ ■

UPC No.

70-559

781412705591

Packaging

Product Weight

Shelf Pack Qty.

Boxed

1.00 lb

Cat. No.

Description

Cat. No.

Description

70-189

Drift Punch 1/8" x 3/8" x 8"

70-197

Drift Punch 1/4" x 5/8" x 11"

70-193

Drift Punch 3/16" x 1/2" x 9"

70-199

Drift Punch 5/16" x 5/8" x 11"

70-195

Drift Punch 7/32" x 1/2" x 9-1/2"

29-407

Vinyl Roll 5 Pockets

S T R I K I N G

Cat. No.

/ S T R U C K

1109 13_StrikingStruck_04_ARM_Punches.indd 1109

2/15/13 3:37 PM

P U N C H E S

C H I S E L S

3 Pc. Brass Pin Punch Set

■ Made in the USA - Quality and Availability ■ Non Marring - Ideal for Work Where A Strong Positive Blow is Necessary Without Damaging the Work Surface ■ Non-Sparking; Ideal for Working on Heavy Equipment, in Mines and Explosive Atmospheres Where Spark Free" is Required" ■ Pin Area Precision Ground to Prevent Any "Binding" in Work Area

Cat. No.

UPC No.

Packaging

Product Weight

Shelf Pack Qty.

70-546

781412705461

Boxed

0.83 lb

Cat. No.

Description

Cat. No.

Description

70-295

Brass Pin Punch 1/4" x 4"

70-297

Brass Solid Punch 1/4" x 6"

70-296

Brass Pin Punch 3/8" x 6"

3 Pc. Brass Drift Punch Set

S T R I K I N G

S T R U C K

■ Made in the USA - Quality and Availability ■ Non Marring - Ideal for Work Where A Strong Positive Blow is Necessary Without Damaging the Work Surface ■ Non-Sparking; Ideal for Working on Heavy Equipment, in Mines and Explosive Atmospheres Where Spark Free" is Required" ■ Flat Tip is Used for Installing and Removing Pins and Shafts and Can Also Be Used to Align Holes in Multiple Pieces of Material Cat. No.

UPC No.

70-545

781412705454

Packaging

Product Weight

Shelf Pack Qty.

Boxed

1.79 lb

Cat. No.

Description

Cat. No.

Description

70-294

Brass Drift Punch 3/8" x 6"

70-291

Brass Drift Punch 3/4" x 8"

70-293

Brass Drift Punch 1/2" x 7"

Punch and Chisel Holder

Made in the USA - Quality and Availability Safety; Protects Against Hand Injury Holds Punches & Chisels Up to 1-1/16" Hex Stock V Head Effectively Traps the Punch or Chisel Securely on 3 Sides Reducing the Risk of Injury ■ Tri-Oval Shaped Handle Conforms to the Hand Increasing Operator Comfort, Reducing Operator Fatigue ■ ■ ■ ■

Cat. No.

UPC No.

70-000

781412700008

Packaging

Overall Length Min

Overall Length Max

Product Weight

Shelf Pack Qty.

Bagged

7.500 in

8.750 in

0.71 lb

1110 13_StrikingStruck_04_ARM_Punches.indd 1110

2/15/13 3:38 PM

P U N C H E S

C H I S E L S

Tool Steel Cold Chisels

■ Made in the USA - Quality and Availability ■ Manufactured From Shock Resistant Tool Steel for Unequalled Strength, Toughness, and Durability; Higher Hardness Without Brittleness ■ Full Shank Heat Treat is A 2 Step Process Where the Entire Length of the Tool is Hardened and Tempered, Then the Struck End is Drawn Back for to Resist Mushrooming" and "Chipping" Extending the Life of the Tool" ■ Cutting Edges Are Ground to Precise Angles for Efficient Cutting and Long Life ■ Modified Parabolic Head Directs the Striking Force to the Center of the Tool for Greater Resistance to "Mushrooming" and "Chipping" ■ Black Oxide Finish and Visible "Wear Safety Goggles" Reminder ■ Hex Stock Fits More Securely in A Punch & Chisel Holder and Also Reduces the Tendency to Roll on Work Surfaces ■ Meets or Exceeds ASME B209.1 and Us Federal Spec. GGG-C-313C Cat. No.

UPC No.

Packaging

Width of Cut

Stock Size

Overall Length

Product Weight

Shelf Pack Qty.

70-325

781412703252

Bagged

3/8 in

5/16 in

5.500 in

0.12 lb

70-329

781412703290

Bagged

1/2 in

7/16 in

6.000 in

0.24 lb

70-331

781412703313

Bagged

5/8 in

1/2 in

6.500 in

0.36 lb

70-333

781412703337

Bagged

3/4 in

5/8 in

7.000 in

0.58 lb

70-335

781412703351

Bagged

7/8 in

3/4 in

7.500 in

0.90 lb

70-337

781412703375

Bagged

1 in

7/8 in

8.000 in

1.24 lb

Width of Cut

Stock Size

Overall Length

Product Weight

Shelf Pack Qty.

Cold Chisels

Packaging

781412703016

Bagged

1/4 in

5.000 in

0.07 lb

70-303

781412703030

Bagged

5/16 in

1/4 in

5.000 in

0.11 lb

70-305

781412703054

Bagged

3/8 in

5/16 in

5.125 in

0.12 lb

70-307

781412703078

Bagged

7/16 in

3/8 in

6.000 in

0.18 lb

70-309

781412703092

Bagged

1/2 in

7/16 in

6.000 in

0.19 lb

70-311

781412703115

Bagged

5/8 in

1/2 in

6.500 in

0.36 lb

70-313

781412703139

Bagged

3/4 in

5/8 in

7.000 in

0.59 lb

70-315

781412703153

Bagged

7/8 in

3/4 in

7.500 in

0.93 lb

70-317

781412703177

Bagged

1 in

7/8 in

8.000 in

1.29 lb

70-319

781412703191

Bagged

1-1/8 in

7/8 in

8.000 in

1.32 lb

S T R U C K

70-301

UPC No.

S T R I K I N G

Cat. No.

1111 13_StrikingStruck_04_ARM_Punches.indd 1111

2/15/13 3:38 PM

P U N C H E S

C H I S E L S

Extra Long Cold Chisels

Made in the USA - Quality and Availability Manufactured From High Alloy Steel for Strength and Durability Heat Treated for Strength and Durability Cutting Edges Are Ground to Precise Angles for Efficient Cutting and Long Life ■ Hex Stock Fits More Securely in A Punch & Chisel Holder and Also Reduces the Tendency to Roll on Work Surfaces ■ ■ ■ ■

Cat. No.

UPC No.

Packaging

Width of Cut

Stock Size

Overall Length

Product Weight

Shelf Pack Qty.

70-347 70-353

781412703474

Bagged

781412703535

Bagged

5/8 in

1/2 in

12.000 in

0.70 lb

3/4 in

5/8 in

12.000 in

1.08 lb

70-357

781412703573

70-361

781412703610

Bagged

3/4 in

5/8 in

18.000 in

1.70 lb

Bagged

7/8 in

3/4 in

12.000 in

1.54 lb

70-367

781412703672

Bagged

1 in

3/4 in

12.000 in

2.06 lb

70-369

781412703696

Bagged

1 in

3/4 in

18.000 in

3.22 lb

Rivet Busters

Made in the USA - Quality and Availability Designed for Shearing Rivets Manufactured From High Alloy Steel for Strength and Durability Heat Treated for Strength and Durability Cutting Edges Are Ground to Precise Angles for Efficient Cutting and Long Life ■ Hex Stock Fits More Securely in A Punch & Chisel Holder and Also Reduces the Tendency to Roll on Work Surfaces

S T R I K I N G

S T R U C K

■ ■ ■ ■ ■

Cat. No.

UPC No.

70-481

781412704815

Packaging

Width of Cut

Stock Size

Overall Length

Product Weight

Shelf Pack Qty.

Bagged

3/4 in

5/8 in

12.000 in

1.06 lb

Stock Size

Overall Length

Product Weight

Shelf Pack Qty.

Cape Chisels

Made in the USA - Quality and Availability Designed for Cutting Slots or Keyways Manufactured From High Alloy Steel for Strength and Durability Heat Treated for Strength and Durability Cutting Edges Are Ground to Precise Angles for Efficient Cutting and Long Life ■ Black Oxide Finish and Visible "Wear Safety Goggles" Reminder ■ Hex Stock Fits More Securely in A Punch & Chisel Holder and Also Reduces the Tendency to Roll on Work Surfaces ■ ■ ■ ■ ■

Cat. No.

UPC No.

Packaging

Width of Cut

70-391 70-393

781412703917

Bagged

3/16 in

3/8 in

5.625 in

0.08 lb

781412703931

Bagged

7/32 in

5/16 in

5.625 in

0.11 lb

70-395

781412703955

Bagged

1/4 in

3/8 in

5.625 in

0.16 lb

70-397

781412703979

Bagged

5/16 in

1/2 in

6.250 in

0.18 lb

70-399

781412703993

Bagged

3/8 in

5/8 in

7.000 in

0.36 lb

1112 13_StrikingStruck_04_ARM_Punches.indd 1112

2/15/13 3:38 PM

P U N C H E S

C H I S E L S

Round Nose Chisels

Made in the USA - Quality and Availability Designed for Cutting Round or U-Grooves Manufactured From High Alloy Steel for Strength and Durability Heat Treated for Strength and Durability Cutting Edges Are Ground to Precise Angles for Efficient Cutting and Long Life ■ Black Oxide Finish and Visible "Wear Safety Goggles" Reminder ■ Hex Stock Fits More Securely in A Punch & Chisel Holder and Also Reduces the Tendency to Roll on Work Surfaces ■ ■ ■ ■ ■

Cat. No.

UPC No.

70-447

781412704471

Packaging

Width of Cut

Stock Size

Overall Length

Product Weight

Shelf Pack Qty.

Bagged

3/16 in

3/8 in

5.500 in

0.07 lb

70-449

781412704495

Bagged

1/4 in

3/8 in

5.750 in

0.165 lb

70-451

781412704518

Bagged

5/16 in

1/2 in

6.250 in

0.18 lb

70-453

781412704532

Bagged

3/8 in

5/8 in

7.000 in

0.37 lb

Overall Length

Product Weight

Shelf Pack Qty.

Diamond Point Chisels

Made in the USA - Quality and Availability Designed to Clean Out Inside Corners and to Cut V-Grooves Manufactured From High Alloy Steel for Strength and Durability Heat Treated for Strength and Durability Cutting Edges Are Ground to Precise Angles for Efficient Cutting and Long Life ■ Black Oxide Finish and Visible "Wear Safety Goggles" Reminder ■ Hex Stock Fits More Securely in A Punch & Chisel Holder and Also Reduces the Tendency to Roll on Work Surfaces ■ ■ ■ ■ ■

UPC No.

Cat. No.

Packaging

Width of Cut

Stock Size

781412704198

Bagged

5/32 in

5/16 in

4.500 in

0.06 lb

781412704211

Bagged

3/16 in

3/8 in

5.500 in

0.16 lb

70-423

781412704235

Bagged

1/4 in

3/8 in

5.750 in

0.18 lb

70-425

781412704259

Bagged

5/16 in

1/2 in

6.000 in

0.33 lb

70-427

781412704273

Bagged

3/8 in

5/8 in

7.000 in

0.54 lb

S T R I K I N G

70-419 70-421

/ S T R U C K

1113 13_StrikingStruck_04_ARM_Punches.indd 1113

2/15/13 3:39 PM

P U N C H E S

C H I S E L S

Tool Steel Pin Punch

Cat. No.

UPC No.

Packaging

Point Diameter

Stock Size

Overall Length

Product Weight

Shelf Pack Qty.

70-110

781412701104

Bagged

1/16 in

1/4 in

4.000 in

0.05 lb

70-112

781412701128

Bagged

3/32 in

5/16 in

4.500 in

0.09 lb

70-114

781412701142

Bagged

1/8 in

5/16 in

4.750 in

0.08 lb

70-116

781412701166

Bagged

5/32 in

5/16 in

5.000 in

0.10 lb

70-118

781412701180

Bagged

3/16 in

3/8 in

5.250 in

0.14 lb

70-120

781412701203

Bagged

7/32 in

3/8 in

5.500 in

0.16 lb

70-122

781412701227

Bagged

1/4 in

3/8 in

5.750 in

0.16 lb

70-124

781412701241

Bagged

9/32 in

3/8 in

5.750 in

0.23 lb

70-126

781412701265

Bagged

5/16 in

7/16 in

6.000 in

0.24 lb

70-128

781412701289

Bagged

3/8 in

1/2 in

6.000 in

0.35 lb

S T R I K I N G

S T R U C K

■ Made in the USA - Quality and Availability ■ Manufactured From Shock Resistant Tool Steel for Unequalled Strength, Toughness, and Durability; Higher Hardness Without Brittleness ■ Full Shank Heat Treat is A 2 Step Process Where the Entire Length of the Tool is Hardened and Tempered, Then the Struck End is Drawn Back for to Resist Mushrooming" and "Chipping" Extending the Life of the Tool" ■ Pin Area Precision Ground to Prevent Any "Binding" in Work Area ■ Modified Parabolic Head Directs the Striking Force to the Center of the Tool for Greater Resistance to "Mushrooming" and "Chipping" ■ Black Oxide Finish and Visible "Wear Safety Goggles" Reminder ■ Hex Stock Fits More Securely in A Punch & Chisel Holder and Also Reduces the Tendency to Roll on Work Surfaces ■ Meets or Exceeds ASME B107.48M and Us Federal Spec. GGG-P-831F

1114 13_StrikingStruck_04_ARM_Punches.indd 1114

2/15/13 3:39 PM

P U N C H E S

C H I S E L S

Tool Steel Long Pin Punch

■ Made in the USA - Quality and Availability ■ Manufactured From Shock Resistant Tool Steel for Unequalled Strength, Toughness, and Durability; Higher Hardness Without Brittleness ■ Full Shank Heat Treat is A 2 Step Process Where the Entire Length of the Tool is Hardened and Tempered, Then the Struck End is Drawn Back for to Resist Mushrooming" and "Chipping" Extending the Life of the Tool" ■ Pin Area Precision Ground to Prevent Any "Binding" in Work Area ■ Modified Parabolic Head Directs the Striking Force to the Center of the Tool for Greater Resistance to "Mushrooming" and "Chipping" ■ Black Oxide Finish and Visible "Wear Safety Goggles" Reminder ■ Hex Stock Fits More Securely in A Punch & Chisel Holder and Also Reduces the Tendency to Roll on Work Surfaces ■ Meets or Exceeds ASME B107.48M and Us Federal Spec. GGG-P-831F UPC No.

Packaging

Point Diameter

Stock Size

Overall Length

Product Weight

Shelf Pack Qty.

70-041

781412700411

Bagged

1/8 in

5/16 in

8.000 in

0.12 lb

70-042

781412700428

Bagged

5/32 in

5/16 in

8.000 in

0.12 lb

70-043

781412700435

Bagged

3/16 in

3/8 in

8.000 in

0.18 lb

70-044

781412700442

Bagged

7/32 in

3/8 in

8.000 in

0.18 lb

70-045

781412700459

Bagged

1/4 in

3/8 in

8.000 in

0.19 lb

70-047

781412700473

Bagged

5/16 in

7/16 in

8.000 in

0.25 lb

70-049

781412700497

Bagged

3/8 in

1/2 in

8.000 in

0.37 lb

Point Diameter

Stock Size

Overall Length

Product Weight

Shelf Pack Qty.

Cat. No.

Brass Pin Punch

Cat. No.

UPC No.

Packaging

70-295

781412702958

Bagged

1/2 in

3/8 in

4.000 in

0.19 lb

70-296

781412702965

Bagged

3/8 in

1/2 in

6.000 in

0.32 lb

S T R I K I N G

/ S T R U C K

1115 13_StrikingStruck_04_ARM_Punches.indd 1115

2/15/13 3:39 PM

P U N C H E S

C H I S E L S

Brass Drift Punches

■ Made in the USA - Quality and Availability ■ Non Marring - Ideal for Work Where A Strong Positive Blow is Necessary Without Damaging the Work Surface ■ Non-Sparking; Ideal for Working on Heavy Equipment, in Mines and Explosive Atmospheres Where Spark Free" is Required" ■ Flat Tip is Used for Installing and Removing Pins and Shafts and Can Also Be Used to Align Holes in Multiple Pieces of Material Cat. No.

UPC No.

Packaging

Point Diameter

Stock Size

Overall Length

Product Weight

Shelf Pack Qty.

70-294

781412702941

Bagged

3/8 in

6.000 in

0.22 lb

70-293

781412702934

Bagged

1/2 in

7.000 in

0.43 lb

70-291

781412702910

Bagged

3/4 in

8.000 in

1.09 lb

Pin Punches

UPC No.

Packaging

Point Diameter

Stock Size

Overall Length

Product Weight

Shelf Pack Qty.

70-101

781412701012

Bagged

1/16 in

1/4 in

4.250 in

0.08 lb

70-103

781412701036

Bagged

3/32 in

5/16 in

4.750 in

0.09 lb

70-105

781412701050

Bagged

1/8 in

5/16 in

5.000 in

0.09 lb

70-107

781412701074

Bagged

5/32 in

5/16 in

5.250 in

0.10 lb

70-109

781412701098

Bagged

3/16 in

3/8 in

5.250 in

0.11 lb

70-129

781412701296

Bagged

7/32 in

3/8 in

7.000 in

0.17 lb

70-131

781412701319

Bagged

1/4 in

3/8 in

7.000 in

0.18 lb

70-133

781412701333

Bagged

5/16 in

7/16 in

7.000 in

0.30 lb

S T R I K I N G

S T R U C K

■ ■ ■ ■

1116 13_StrikingStruck_04_ARM_Punches.indd 1116

2/15/13 3:39 PM

P U N C H E S

C H I S E L S

Roll Pin Punches

Cat. No.

UPC No.

70-260

781412702606

70-262

781412702620

Packaging

Point Diameter

Stock Size

Bagged

1/16 in

1/4 in

Bagged

3/32 in

1/4 in

Overall Length

Product Weight

Shelf Pack Qty.

2.750 in

0.07 lb

3.500 in

0.08 lb

70-264

781412702644

Bagged

1/8 in

1/4 in

4.000 in

0.08 lb

70-266

781412702668

Bagged

5/32 in

1/4 in

4.500 in

0.09 lb

70-268

781412702682

Bagged

3/16 in

3/8 in

4.500 in

0.10 lb

70-270

781412702705

Bagged

7/32 in

3/8 in

5.000 in

0.10 lb

70-272

781412702729

Bagged

1/4 in

7/16 in

5.500 in

0.13 lb

70-274

781412702743

Bagged

5/16 in

7/16 in

6.000 in

0.18 lb

70-276

781412702767

Bagged

3/8 in

1/2 in

6.000 in

0.24 lb

70-280

781412702804

Bagged

1/2 in

5/8 in

6.000 in

0.64 lb

Shelf Pack Qty.

Drift Punches

■ ■ ■ ■

UPC No.

Packaging

Point Diameter

Stock Size

Overall Length

Product Weight

70-187

781412701876

Bagged

3/32 in

5/16 in

8.000 in

0.18 lb

70-189

781412701890

Bagged

1/8 in

5/16 in

8.000 in

0.19 lb

70-191

781412701913

Bagged

5/32 in

1/2 in

8.500 in

0.34 lb

70-193

781412701937

Bagged

3/16 in

1/2 in

9.000 in

0.38 lb

Bagged

7/32 in

1/2 in

10.000 in

0.41 lb

Bagged

1/4 in

5/8 in

12.000 in

0.77 lb

70-199

781412701999

Bagged

5/16 in

5/8 in

12.000 in

0.78 lb

70-201

781412702019

Bagged

3/8 in

3/4 in

15.000 in

1.18 lb

S T R U C K

781412701951 781412701975

70-195 70-197

S T R I K I N G

Cat. No.

1117 13_StrikingStruck_04_ARM_Punches.indd 1117

2/15/13 3:40 PM

P U N C H E S

C H I S E L S

Long Aligning Punch

Made in the USA - Quality and Availability Manufactured From High Alloy Steel for Strength and Durability Heat Treated for Strength and Durability Flat Tip with Precision Ground Taper is Used to Align Holes in Multiple Pieces of Material ■ Black Oxide Finish and Visible "Wear Safety Goggles" Reminder ■ Hex Stock Fits More Securely in A Punch & Chisel Holder and Also Reduces the Tendency to Roll on Work Surfaces ■ ■ ■ ■

Cat. No.

UPC No.

70-221

781412702217

Packaging

Point Diameter

Stock Size

Overall Length

Product Weight

Shelf Pack Qty.

Bagged

5/16 in

5/8 in

16.000 in

0.82 lb

Starting Punches

Made in the USA - Quality and Availability Manufactured From High Alloy Steel for Strength and Durability Heat Treated for Strength and Durability Flat Tip with Precision Ground Taper is Used for Installing and Removing Pins and Shafts ■ Black Oxide Finish and Visible "Wear Safety Goggles" Reminder ■ Hex Stock Fits More Securely in A Punch & Chisel Holder and Also Reduces the Tendency to Roll on Work Surfaces

S T R I K I N G

S T R U C K

■ ■ ■ ■

Cat. No.

UPC No.

Packaging

Point Diameter

Stock Size

Overall Length

Product Weight

Shelf Pack Qty.

70-153

781412701531

Bagged

1/16 in

5/16 in

4.500 in

0.08 lb

70-155

781412701555

Bagged

3/32 in

5/16 in

4.500 in

0.09 lb

70-157

781412701579

Bagged

1/8 in

5/16 in

4.500 in

0.14 lb

70-159

781412701593

Bagged

5/32 in

3/8 in

5.000 in

0.13 lb

70-161

781412701616

Bagged

3/16 in

3/8 in

5.000 in

0.17 lb

70-163

781412701630

Bagged

7/32 in

1/2 in

5.500 in

0.25 lb

70-165

781412701654

Bagged

1/4 in

1/2 in

6.000 in

0.29 lb

70-167

781412701678

Bagged

5/16 in

1/2 in

6.000 in

0.32 lb

Center Punches

Made in the USA - Quality and Availability Manufactured From High Alloy Steel for Strength and Durability Heat Treated for Strength and Durability In Metal Working Layout, Pointed Tip is Used for Marking Intersecting Center Lines, Hole Locations, and Pilot Drill Starting Points ■ Black Oxide Finish and Visible "Wear Safety Goggles" Reminder ■ Hex Stock Fits More Securely in A Punch & Chisel Holder and Also Reduces the Tendency to Roll on Work Surfaces ■ ■ ■ ■

Cat. No.

UPC No.

Packaging

Stock Size

Overall Length

Product Weight

Shelf Pack Qty.

70-231

781412702316

Bagged

1/4 in

4.250 in

0.06 lb

70-233

781412702330

Bagged

5/16 in

4.375 in

0.09 lb

70-235

781412702354

Bagged

3/8 in

5.000 in

0.13 lb

70-237

781412702378

Bagged

7/16 in

5.500 in

0.21 lb

70-239

781412702392

Bagged

1/2 in

6.000 in

0.27 lb

70-241

781412702415

Bagged

5/8 in

6.250 in

0.51 lb

1118 13_StrikingStruck_04_ARM_Punches.indd 1118

2/15/13 3:40 PM

P U N C H E S

C H I S E L S

Prick Punches

Made in the USA - Quality and Availability Manufactured From High Alloy Steel for Strength and Durability Heat Treated for Strength and Durability In Sheet Metal Layout, Pointed Tip is Used for Scribing and for Punching and Marking Holes for Sheet Metal Screws ■ Black Oxide Finish and Visible "Wear Safety Goggles" Reminder ■ Hex Stock Fits More Securely in A Punch & Chisel Holder and Also Reduces the Tendency to Roll on Work Surfaces ■ ■ ■ ■

Cat. No.

UPC No.

Packaging

Stock Size

Overall Length

Product Weight

Shelf Pack Qty.

70-251

781412702514

Bagged

1/4 in

4.000 in

0.06 lb

70-253

781412702538

Bagged

5/16 in

4.500 in

0.09 lb

70-255

781412702552

Bagged

3/8 in

5.000 in

0.13 lb

70-257

781412702576

Bagged

1/2 in

6.000 in

0.28 lb

Brass Taper Punch

■ Made in the USA - Quality and Availability ■ Non Marring - Ideal for Work Where A Strong Positive Blow is Necessary Without Damaging the Work Surface ■ Non-Sparking; Ideal for Working on Heavy Equipment, in Mines and Explosive Atmospheres Where Spark Free" is Required" ■ Flat Tip is Used for Installing and Removing Pins and Shafts and Can Also Be Used to Align Holes in Multiple Pieces of Material UPC No.

70-292

781412702927

Packaging

Point Diameter

Stock Size

Overall Length

Product Weight

Shelf Pack Qty.

Bagged

1/4 in

4.000 in

0.08 lb

Cat. No.

Brass Solid Punch

Cat. No.

UPC No.

70-297

781412702972

Packaging

Point Diameter

Stock Size

Overall Length

Product Weight

Shelf Pack Qty.

Bagged

1/4 in

1/2 in

6.000 in

0.32 lb

S T R I K I N G

■ Made in the USA - Quality and Availability ■ Non Marring - Ideal for Work Where A Strong Positive Blow is Necessary Without Damaging the Work Surface ■ Non-Sparking; Ideal for Working on Heavy Equipment, in Mines and Explosive Atmospheres Where Spark Free" is Required" ■ Flat Tip is Used for Installing and Removing Pins and Shafts and Can Also Be Used to Align Holes in Multiple Pieces of Material

/ S T R U C K

1119 13_StrikingStruck_04_ARM_Punches.indd 1119

2/15/13 3:41 PM

P U N C H E S

C H I S E L S

27 Pc. Punch and Chisel Set

S T R I K I N G

S T R U C K

■■ Chisel for Cutting Rivets, Bolts, and Nuts ■■ Pin Punch for Final Removal to Drive Out Pins and Rivets ■■ Center Punch for Marking Center Lines and Pilot Drill Locations ■■ Long Taper Punch to Install and Remove Pins and Shafts and to Align Holes ■■ Starter Punch for Both Starting and Installing Pins and Rivets

1120

Cat. No.

UPC No.

Packaging

Product Weight

Shelf Pack Qty.

82306

099575823060

Bagged

9.29 lb

Cat. No.

Description

Cat. No.

Description

82261

1/4" x 4-3/4" x 1/4" Cold Chisel

82275

3/16" x 5-1/2" x 5/16" Pin Punch

82262

3/8" x 5" x 5/16" Cold Chisel

82276

1/4" x 7" x 3/8" Pin Punch

82263

7/16" x 5-1/2" x 3/8" Cold Chisel

82277

5/16" x 7" x 1/2" Pin Punch

82264

1/2" x 6" x 3/8" Cold Chisel

82278

1/8" x 8" x 3/8" Long Taper Punch

82265

5/8" x 6-1/2" x 3/8" Cold Chisel

82279

5/32" x 8-1/2" x 1/2" Long Taper

82266

3/4" x 7" x 5/8" Cold Chisel

82280

3/16" x 9" x 1/2" Long Taper Punch

82267

7/8" x 7-1/2" x 3/4" Cold Chisel

82281

1/4" x 11" x 5/8" Long Taper Punch

82268

1" x 8" x 7/8" Cold Chisel

82282

5/32" x 5" x 3/8" Starter Punch

82269

1/4" x 4-1/4" Center Punch

82283

3/16" x 5" x 3/8" Starter Punch

82270

3/8" x 5" Center Punch

82284

1/4" x 6" x 1/2" Starter Punch

82271

7/16" x 5-1/2" Center Punch

82285

1/8" x 4-1/2" x 5/16" Starter

82272

3/32" x 4-3/4" x 5/16" Pin Punch

82286

5/16" x 7" x 5/8" Starter Punch

82273

1/8" x 5" x 5/16" Pin Punch

82287

3/8" x 8" x 3/4" Starter Punch

82274

5/32" x 5-1/4" x 5/16" Pin Punch

P U N C H E S

C H I S E L S

12 Pc. Punch and Chisel Set

Cat. No.

UPC No.

Packaging

Product Weight

Shelf Pack Qty.

82305

099575823053

Bagged

1.97 lb

Cat. No.

Description

Cat. No.

Description

82261

1/4" x 4-3/4" x 1/4" Cold Chisel

82273

1/8" x 5" x 5/16" Pin Punch

82262

3/8" x 5" x 5/16" Cold Chisel

82274

5/32" x 5-1/4" x 5/16" Pin Punch

82264

1/2" x 6" x 3/8" Cold Chisel

82275

3/16" x 5-1/2" x 5/16" Pin Punch

82265

5/8" x 6-1/2" x 3/8" Cold Chisel

82278

1/8" x 8" x 3/8" Long Taper Punch

82270

3/8" x 5" Center Punch

82283

3/16" x 5" x 3/8" Starter Punch

82272

3/32" x 4-3/4" x 5/16" Pin Punch

82285

1/8" x 4-1/2" x 5/16" Starter

5 Pc. Punch and Chisel Set 13

■■ Chisel for Cutting Rivets, Bolts, and Nuts ■■ Pin Punch for Final Removal to Drive Out Pins and Rivets ■■ Center Punch for Marking Center Lines and Pilot Drill Locations

UPC No.

82304

099575823046

Packaging

Product Weight

Shelf Pack Qty.

Bagged

0.61 lb

Cat. No.

Description

Cat. No.

Description

1/2" x 6" x 3/8" Cold Chisel

82274

5/32" x 5-1/4" x 5/16" Pin Punch

3/8" x 5" Center Punch

82275

3/16" x 5-1/2" x 5/16" Pin Punch

82273

1/8" x 5" x 5/16" Pin Punch

82264 82270

S T R I K I N G

Cat. No.

S T R U C K

1121

P U N C H E S

C H I S E L S

4 Pc. Cold Chisel Set

■■ Designed to Cut Metal Such As Wrought Iron, Steel, Brass, and Aluminum ■■ For Cutting Rivets, Bolts, and Nuts

Cat. No.

UPC No.

Packaging

Product Weight

Shelf Pack Qty.

82308

099575823084

Bagged

1.35 lb

Cat. No.

Description

Cat. No.

Description

82263

7/16" x 5-1/2" x 3/8" Cold Chisel

82265

5/8" x 6-1/2" x 3/8" Cold Chisel

82264

1/2" x 6" x 3/8" Cold Chisel

82266

3/4" x 7" x 5/8" Cold Chisel

5 Pc. Pin Punch Set

Cat. No.

UPC No.

82309

099575823091

Packaging

Product Weight

Shelf Pack Qty.

Bagged

0.78 lb

Cat. No.

Description

Cat. No.

Description

82273

1/8" x 5" x 5/16" Pin Punch

82276

1/4" x 7" x 3/8" Pin Punch

82274

5/32" x 5-1/4" x 5/16" Pin Punch

82277

5/16" x 7" x 1/2" Pin Punch

82275

3/16" x 5-1/2" x 5/16" Pin Punch

4 Pc. Long Taper Punch Set

■■ Used to Install and Remove Pins and Shafts and to Align Holes

S T R I K I N G

S T R U C K

■■ Used For Final Removal to Drive out Pins and Rivets ■■ Softened and Tapered Striking end reduces potential to chip ■■ Ground surface for ease of identification ■■ Precision Harded working ends

1122

Cat. No.

UPC No.

82307

099575823077

Packaging

Product Weight

Shelf Pack Qty.

Bagged

1.72 lb

Cat. No.

Description

Cat. No.

Description

82278

1/8" x 8" x 3/8" Long Taper Punch

82280

3/16" x 9" x 1/2" Long Taper Punch

82279

5/32" x 8-1/2" x 1/2" Long Taper

82281

1/4" x 11" x 5/8" Long Taper Punch

P U N C H E S

C H I S E L S

Cold Chisels

■■ Designed to Cut Metal Such As Wrought Iron, Steel, Brass, and Aluminum ■■ For Cutting Rivets, Bolts, and Nuts ■■ Meets or Exceeds ASME B107.47 Cat. No.

UPC No.

Packaging

Width of Cut

Stock Size

Overall Length

Product Weight

Shelf Pack Qty.

82261

099575822612

Bagged

1/4 in

4-3/4 in

0.08 lb

82262

099575822629

Bagged

3/8 in

5/16 in

5 in

0.13 lb

82263

099575822636

Bagged

7/16 in

3/8 in

5-1/2 in

0.18 lb

82264

099575822643

Bagged

1/2 in

3/8 in

6 in

0.20 lb

82265

099575822650

Bagged

5/8 in

3/8 in

6-1/2 in

0.36 lb

82266

099575822667

Bagged

3/4 in

5/8 in

7 in

0.60 lb

82267

099575822674

Bagged

7/8 in

3/4 in

7-1/2 in

0.91 lb

82268

099575822681

Bagged

1 in

7/8 in

8 in

1.29 lb

Center Punches

■■ Used for Marking Center Lines and Pilot Drill Locations ■■ Meets or Exceeds ASME B107.47

Cat. No.

UPC No.

Packaging

Stock Size

Overall Length

Product Weight

Shelf Pack Qty.

82269

099575822698

Bagged

1/4 in

4-1/4 in

0.06 lb

82270

099575822704

Bagged

3/8 in

5 in

0.13 lb

82271

099575822711

Bagged

7/16 in

5-1/2 in

0.20 lb

Pin Punches

■■ Used for Final Removal to Drive Out Pins and Rivets ■■ Meets or Exceeds ASME B107.47 UPC No.

Packaging

Point Diameter

Stock Size

Overall Length

Product Weight

Shelf Pack Qty.

82272

099575822728

Bagged

3/32 in

5/16 in

4-3/4 in

0.09 lb

82273

099575822735

Bagged

1/8 in

5/16 in

5 in

0.09 lb

82274

099575822742

Bagged

5/32 in

5/16 in

5-1/4 in

0.10 lb

82275

099575822759

Bagged

3/16 in

5/16 in

5-1/2 in

0.09 lb

099575822766

Bagged

1/4 in

3/8 in

7 in

0.19 lb

099575822773

Bagged

5/16 in

1/2 in

7 in

0.32 lb

Overall Length

Product Weight

Shelf Pack Qty.

82276 82277

S T R I K I N G

Cat. No.

S T R U C K

Long Taper Punches

■■ Used to Install and Remove Pins and Shafts and to Align Holes ■■ Meets or Exceeds ASME B107.47

Cat. No.

UPC No.

82278

099575822780

82279

099575822797

Packaging

Point Diameter

Stock Size

Bagged

1/8 in

3/8 in

8 in

0.21 lb

Bagged

5/32 in

1/2 in

8-1/2 in

0.36 lb

82280

099575822803

Bagged

3/16 in

1/2 in

9 in

0.38 lb

82281

099575822810

Bagged

1/4 in

5/8 in

11 in

0.79 lb

1123

P U N C H E S

C H I S E L S

Starter Punches

■■ Designed for Both Starting and Installing Pins and Rivets ■■ Meets or Exceeds ASME B107.47

S T R I K I N G

S T R U C K

Cat. No.

1124

UPC No.

Packaging

Point Diameter

Stock Size

Overall Length

Product Weight

Shelf Pack Qty.

82282

099575822827

Bagged

5/32 in

3/8 in

5 in

0.14 lb

82283

099575822834

Bagged

3/16 in

3/8 in

5 in

0.14 lb

82284

099575822841

Bagged

1/4 in

1/2 in

6 in

0.29 lb

82285

099575822858

Bagged

1/8 in

5/16 in

4-1/2 in

0.09 lb

82286

099575822865

Bagged

5/16 in

5/8 in

7 in

0.54 lb

82287

099575822872

Bagged

3/8 in

3/4 in

8 in

0.00 lb

P R Y

B A R S

D E M O L I T I O N

Indexing Pry Bars.............................. 1128 Adjustable Pry Bars........................... 1128 Molding Bars...................................... 1128 Nail Pullers......................................... 1129

Indexing Pry Bars.............................. 1130 Extendable Pry Bars.......................... 1131 Nail Pulling Pry Bar........................... 1131

Pry Bar Sets....................................... 1132

Rolling Head Pry Bars....................... 1133

P R Y

Pry Bars............................................. 1132

B A R S / D E M O L I T I O N

Rebar Benders................................... 1134

1125

P R Y

B A R S

D E M O L I T I O N

Pry Bars Tackle your next project with the latest innovations from Crescent®, the brand recognized by professionals for superior strength and quality for over 100 years. Code RedTM renovation and demolition tools are designed around powerful innovations that allow you to attack renovation projects from the best angle, adjust your tool to fit the task, and get the job done faster and easier. And don’t worry – they’re all built to survive the toughest demolition jobs.

Raised surface on the back of the head provides location for users to strike

90° angled flat head offers better access and wider support for prying against surfaces

Head indexes over 180° and locks into 16 positions for increased access

Pressing the extension button allows the jaws to slide and clamp onto boards and other materials for pulling, prying and straightening

D E M O L I T I O N

Jaws open up 5.5" in 1/2" increments

Two-tone rubber grip allows for comfort and safety

P R Y

B A R S

Hammer style head for striking and persuading nails, boards, etc.

1126

Extendable jaws provide increased access and force for pulling longer nails

Curved bar end provides maximum strength ideal for increased prying leverage

P R Y

B A R S

D E M O L I T I O N

Pry Bars The GearWrench® Indexing Pry Bar Program has changed the way prybars are used. The indexing head can get to where others can’t and perform at 2x ANSI standards for safety and reliability. Offered in both standard and extendable handles, these prybars are a must for every box…and fit in the drawers too for easy secure storage. Exceeds ANSI requirements for proven strength

INDEXING PRY BARS Puts the pry bar where you need it for best leverage

Indexible to 180° for greater leverage

14 locking positions for unmatched access

Grooved profile adds traction on 24", 33" and extendable models Extends from 29" to 48"

Push button to extend reach

Extendable pry bar collapses so you can store it securely in your tool box

Manufactured from high alloy steel for strength and durability

Handle conforms to the hand increasing operator comfort, provides a sure grip

Tapered end for aligning applications

D E M O L I T I O N

Curved blade provides extra leverage

PRY & ALIGNING BARS

B A R S

Armstrong® offers a wide variety of professional Pry, Aligning, and Rolling Head Bars for just about any application. All are made to exacting standards with ASME and Federal Spec callouts where applicable. They also incorporate professional quality features. Pry bars with handles are designed to maximize leverage and comfort, blades are designed to provide maximum leverage, and tapered tips for tough aligning jobs. In addition, superior design, materials, and heat treat optimize durability and strength. Available individually or in a selection of sets, these precision made tools can handle just about any prying or aligning application.

P R Y

Pry Bars

Rolling head provides maximum leverage

1127

P R Y

B A R S

D E M O L I T I O N

CODE RED

Indexing Flat Renovation Bar

SERIOUS

R E N OVAT I O N

■■ Head Indexes Over 180 Degrees and Locks in 16 Positions ■■ Head Has Raised Striking Surface Allows for Striking to Loosen and Penetrate ■■ Angles Head with Nail Slot for Prying and Pulling Nails and Boards ■■ Durable Two-Tone Grip Provides Comfort, Control, and Safety ■■ Narrow Jab End for Extreme Prying and Leverage Cat. No.

UPC No.

Packaging

Length

Extendable Length

Product Weight

DB18X

037103257864

Boxed

18.0 in

3.00 lb

Shelf Pack Qty.

DB30X

037103257871

Boxed

30.0 in

4.10 lb

CODE RED

Adjustable Pry Bar

SERIOUS

R E N OVAT I O N

■■ Adjustable Jaws Slide and Clamp to Fit Onto Objects for Straightening and Prying ■■ Crow Bar End with Nail Puller Slot ■■ Striking Hammer head surface for Persuasion ■■ Large Claw on Head That Adjusts for Leverage in Pulling Nails

Cat. No.

UPC No.

Packaging

Length

Product Weight

Shelf Pack Qty.

DB16

037103257888

Boxed

16 in

3.68 lb

DB24

037103257895

Boxed

24 in

4.43 lb

14 D E M O L I T I O N

SERIOUS

R E N OVAT I O N

■■ Precision Ground Ends for Nail Pulling with Less Material Damage ■■ Nail Slot in End and Center for Access to Pulling Nails ■■ Durable High Visibility Red Finish is Corrosion-Resistant ■■ Radius End Design Adds Strength and Provides Better Prying Leverage Cat. No.

UPC No.

Packaging

Length

Product Weight

Shelf Pack Qty.

FB13

037103257819

Carded

13 in

1.46 lb

FB15

037103257826

Carded

15 in

1.59 lb

FB7

037103257796

Carded

7 in

0.27 lb

CODE RED

Molding Bars

/ B A R S P R Y

1128

CODE RED

Flat Pry Bar

SERIOUS

R E N OVAT I O N

■■ Striking Face Has Ground Surface for Precision Nailing ■■ Precision Ground Ends for Nail Pulling with Less Material Damage ■■ Nail Slot in Both Claw and Pry Ends for Access to Pulling ■■ Durable High Visibility Red Finish is Corrosion-Resistant

Cat. No.

UPC No.

Packaging

Length

Product Weight

Shelf Pack Qty.

MB10

037103257840

Carded

10 in

0.76 lb

MB12

037103257857

Carded

12 in

0.80 lb

MB8

037103257833

Carded

8 in

0.50 lb

P R Y

B A R S

D E M O L I T I O N

CODE RED

Nail Puller Pliers

SERIOUS

R E N OVAT I O N

■■ Allows Users to Easily Extract Nails Regardless of Size or if the Head of Nail is Damaged or Removed ■■ Dual Handles Make it Quick and Easy to Grip, Roll, and Remove Nails or Staples ■■ Forged Steel Handles and Head Create a Durable Tool with Rubber Grips for Comfort and Control

Cat. No.

UPC No.

NP11

037103263582

Packaging

Length

Product Weight

Shelf Pack Qty.

Carded

11 in

1.5 lb

Nail Puller ■■ Box-Joint, Forged Alloy, Hardened and Tempered Jaw ■■ Available in Short or Long Jaw ■■ Black Enamel Finish ■■ Conforms to US Federal Spec. GGG-P-79Lb, Type 1, Class-1

Cat. No.

UPC No.

037103462848

Packaging

Length

Ext. Length

Product Weight

Shelf Pack Qty.

Carded

19 in

4.20 lb

14 P R Y B A R S / D E M O L I T I O N

1129

P R Y

B A R S

D E M O L I T I O N

3 Pc. Pry Bar Set

■■ For Engine Repositioning and Placement, Aligning Steel Components and Fabrications and Repositioning Equipment ■■ Head Indexible Through 180° for Greater Leverage ■■ 8 in. and 10 in. Pry Bars Provide Leverage in Tight Confines ■■ 16 in. Pry Bar for Leverage in Medium-Duty Automotive and Industrial Applications ■■ 14 Locking Head Positions for Unmatched Access

Cat. No.

UPC No.

Packaging

Product Weight

Shelf Pack Qty.

82301D

099575823015

Boxed

4.33 lb

Cat. No.

Description

Cat. No.

Description

82208

8 in. Indexing Pry Bar

82216

16 in. Indexing Pry Bar

82210

10 in. Indexing Pry Bar

2 Pc. Pry Bar Set

D E M O L I T I O N

■■ For Engine Repositioning and Placement, Aligning Steel Components and Fabrications and Repositioning Equipment ■■ Head Indexible Through 180° for Greater Leverage ■■ 8 in. Pry Bar Provides Leverage in Tight Confines ■■ 16 in. Pry Bar for Leverage in Medium-Duty Automotive and Industrial Applications ■■ 14 Locking Head Positions for Unmatched Access Cat. No.

UPC No.

Packaging

Product Weight

Shelf Pack Qty.

82300

099575823008

Boxed

2.43 lb

Cat. No.

Description

Cat. No.

Description

82208

8 in. Indexing Pry Bar

82216

16 in. Indexing Pry Bar

Indexing Pry Bars

■■ For Leverage in Medium-Duty Automotive and Industrial Applications ■■ For Demolition, Repositioning Equipment, Aligning Steel Components, Engine Repositioning, and Other Heavy-Duty Applications ■■ 14 Locking Head Positions for Unmatched Access ■■ Grooved Profile Adds Traction on 24 in. and 33 in. Models UPC No.

Packaging

Length

Extendable Length

Product Weight

Shelf Pack Qty.

P R Y

B A R S

Cat. No.

1130

82208

099575822087

Boxed

8 in

0.87 lb

82210

099575822100

Boxed

10 in

1.08 lb

82216

099575822162

Boxed

16 in

1.69 lb

82224

099575822247

Boxed

24 in

5.10 lb

82233

099575822339

Boxed

33 in

5.90 lb

P R Y

B A R S

D E M O L I T I O N

Extendable Indexing Pry Bars

■■ For Demolition, Repositioning Equipment, Aligning Steel Components, Engine Repositioning, and Other Heavy-Duty Applications ■■ Extendable Handle Gives Greater Access and Leverage, and Collapses so it can be Stored Easily ■■ 14 Locking Head Positions for Unmatched Access ■■ Grooved Head Profile Provides Additional Traction ■■ Head Indexible through 180° for Greater Leverage Cat. No.

UPC No.

Packaging

Cont. Length

Ext. Length

Extendable Length

Product Weight

Shelf Pack Qty.

82220

099575822209

Boxed

18.0 in

29.0 in

Yes

5.28 lb

82248

099575822483

Boxed

29.0 in

48.0 in

Yes

10.21 lb

Nail Pulling Pry Bar ■■ Fits Nail Sizes 14D to 10D ■■ Indexible to 180 Degrees ■■ 14 Locking Positions

Cat. No.

UPC No.

82212

099575822124

Packaging

Length

Ext. Length

Product Weight

Shelf Pack Qty.

Boxed

12 in

4.82 lb

UPC No.

82200

099575822001

Packaging

Product Weight

Shelf Pack Qty.

Boxed

1.58 lb

P R Y

Cat. No.

18" Rolling Wedge Bar

B A R S / D E M O L I T I O N

1131

P R Y

B A R S

D E M O L I T I O N

4 Pc. Pry Bar Set ■■ Made in the USA - Quality and Availability ■■ Manufactured from High Alloy Steel for Strength and Durability ■■ Curved Blade Provides Extra Leverage ■■ Handle Conforms to the Hand Increasing Operator Comfort, Provides a Sure Grip

Cat. No.

UPC No.

Packaging

Product Weight

Shelf Pack Qty.

70-579

781412705799

Boxed

5.65 lb

Cat. No.

Description

Cat. No.

Description

70-531

12 in. Pry Bar

70-535

25 in. Pry Bar

70-533

17 in. Pry Bar

70-537

31 in. Pry Bar

4 Pc. Aligning/Rolling Head Set

P R Y

B A R S

D E M O L I T I O N

■■ Made in the USA - Quality and Availability ■■ Manufactured From High Alloy Steel for Strength and Durability ■■ Rolling Heads / Curved Blades Provides Leverage ■■ Tapered End for Aligning Applications

1132

Cat. No.

UPC No.

70-578

781412705782

Packaging

Product Weight

Shelf Pack Qty.

Boxed

7.04 lb

Cat. No.

Description

Cat. No.

Description

70-503

Aligning Pry Bar 5/8 in. x 16 in.

70-519

Rolling Head Bar 1/2" x 15"

70-505

Aligning Pry Bar 3/4 in. x 24 in.

70-521

Rolling Head Bar 5/8" x 18"

Pry Bars ■■ Made in the USA - Quality and Availability ■■ Manufactured From High Alloy Steel for Strength and Durability ■■ Curved Blade Provides Extra Leverage ■■ Handle Conforms to the Hand Increasing Operator Comfort, Provides a Sure Grip Cat. No.

UPC No.

70-531

781412705317

Packaging

Tip Width

Stock Size

Blade Length

Length

Product Weight

Shelf Pack Qty.

Bulk

5/8 in

3/8 in

7 in

12 in

0.63 lb

1 1

70-533

781412705331

Bulk

5/8 in

3/8 in

12 in

17 in

0.83 lb

70-535

781412705355

Bulk

11/16 in

1/2 in

18 in

25 in

1.89 lb

70-537

781412705379

Bulk

11/16 in

1/2 in

24 in

31 in

2.77 lb

70-539

781412705393

Bulk

1 in

7/8 in

28 in

36 in

3.23 lb

P R Y

B A R S

D E M O L I T I O N

Aligning Pry Bars ■■ Made in the USA - Quality and Availability ■■ Manufactured from High Alloy Steel for Strength and Durability ■■ Curved Blade Provides Extra Leverage ■■ Tapered End for Aligning Applications Cat. No.

UPC No.

Packaging

Tip Width

70-501

781412705010

Bulk

1/2 in

70-503

781412705034

Bulk

5/8 in

70-505

781412705058

Bulk

3/4 in

70-507

781412705072

Bulk

7/8 in

70-509

781412705096

Bulk

70-511

781412705119

Bulk

Stock Size

Length

Product Weight

Shelf Pack Qty.

1/2 in

14 in

0.69 lb

5/8 in

16 in

1.22 lb

3/4 in

24 in

3.08 lb

7/8 in

30 in

4.93 lb

1-1/16 in

7/8 in

46 in

7.97 lb

1-3/16 in

1-1/16 in

54 in

10.45 lb

Length

Product Weight

Shelf Pack Qty.

Rolling Head Pry Bars ■■ Made in the USA - Quality and Availability ■■ Manufactured from High Alloy Steel for Strength and Durability ■■ Rolling Head Provides Maximum Leverage ■■ Tapered End for Aligning Applications Cat. No.

UPC No.

Packaging

Tip Width

Stock Size

70-517 70-519

781412705171

Bulk

3/8 in

9 in

0.31 lb

781412705195

Bulk

1/2 in

15 in

0.31 lb

70-521

781412705218

Bulk

5/8 in

18 in

1.59 lb

Polished Rolling Head Pry Bars

UPC No.

70-515

781412705157

Packaging

Tip Width

Stock Size

Length

Product Weight

Shelf Pack Qty.

Bulk

9/16 in

5/8 in

18 in

1.25 lb

B A R S

Cat. No.

P R Y

■■ Made in the USA - Quality and Availability ■■ Manufactured from High Alloy Steel for Strength and Durability ■■ Rolling Head Provides Maximum Leverage ■■ Tapered End for Aligning Applications

/ D E M O L I T I O N

1133

P R Y

B A R S

D E M O L I T I O N

3/8" (#3) and 1/2" (#4) Extendable Indexing Rebar Bender

■■ Dual Use Head Allows Bending for Both #3 and #4 Rebar ■■ Push Button Extends Bender to 35 inches for Maximum Leverage; Collapses to Just 21 inches for Convenient Storage and Portability ■■ 14-Position Indexing Head Adjusts with Center Push Button to Allow Total Access for Maximum Leverage ■■ Extra-Sturdy Steel Handles for the Toughest Conditions ■■ Super-Strong Indexing Head Grips Rebar Securely for Accurate Bends

Cat. No.

UPC No.

RB4

037103248770

Packaging

Length

Capacity

Product Weight

Shelf Pack Qty.

Boxed

22-3/4 in, 35 in

3/8 in, 1/2 in

4.70 lb

5/8" (#5) Indexing Rebar Bender

Cat. No.

UPC No.

RB5

037103248787

Packaging

Length

Capacity

Product Weight

Shelf Pack Qty.

Boxed

44-1/4 in

5/8 in

8.75 lb

3/4" (#6) Indexing Rebar Bender

■■ 14-Position Indexing Head Adjusts with Center Push Button to Allow Total Access for Maximum Leverage ■■ Extra-Sturdy Steel Handles for the Toughest Conditions ■■ Super-Strong Indexing Head Grips Rebar Securely for Accurate Bends

P R Y

B A R S

D E M O L I T I O N

1134

Cat. No.

UPC No.

RB6

037103248794

Packaging

Length

Capacity

Product Weight

Shelf Pack Qty.

Boxed

44-1/4 in

3/4 in

8.75 lb

C L A M P I N G

P U L L I N G

Ratcheting Pullers............................. 1137 Reversible Puller................................ 1139 Combination Pullers.......................... 1139 Slide Hammer Pullers........................ 1139

Heavy Duty C-Clamps........................ 1141 General Service C-Clamps................ 1142 Square Throat C-Clamps................... 1142 Deep Throat C-Clamps...................... 1144 Hi-Viz Deep Throat C-Clamps........... 1145 Lifting Eyes (Eye Bolts)..................... 1147 15

Set-up Wedges.................................. 1150

C L A M P I N G / P U L L I N G

1135

C L A M P I N G

P U L L I N G

Clamping/Pulling GearWrench® ratcheting pullers have a time-saving, indexing-jaw design. The legs index into position and stay in place, letting you easily support the puller and quickly connect each jaw one at a time to the pulley—without help. The pullers can also be converted to two- and three-leg pullers and the jaws reversed from external to internal style in seconds. Available in 2, 5, and 7-ton models. Maximum spread of 10 inches. Also available: 5-Ton Ratcheting Short / Long Leg Puller. Anti-mushrooming head ensures good socket fit

Forged jaws for strength

Quick change jaws for 2to 3-jaw, internal/external operations Chrome-plated rotating replaceable tip prevents surface marks

Geared jaws for easy positioning

Armstrong® Clamping Tools offer a wide variety of professional C-Clamps and Lifting Eyes for just about any application. All are made to exacting standards with ASME and Federal Spec callouts where applicable. The extensive line of C-Clamps includes deep throat, super deep throat, general service, and heavy duty styles with standard black oxide and high visibility finishes, as well as zinc plated forcing screws for welding. All C-Clamp frames are drop forged from alloy steel and all anvils are produced to ensure a flat surface for proper alignment with the screw. These precision made C-Clamps can handle just about any clamping or holding application while cutting, drilling, welding, or fastening multiple pieces.

LIFTING EYES

C L A M P I N G

Manufactured in accordance with the latest revision of ANSI/ ASME B18.15

1136

Threads are roll formed for greater strength, smoother running, more clamping force with less effort and resistance to nicks

Heavy-walled hub offers greater support to the forcing screw

P U L L I N G

Clamping/Pulling

I-beam design for greater strength, yet lighter weight

C-CLAMPS Forcing screw has a sliding handle for speed and leverage Patented design pad is coldformed, completely encircling the ball of the screw, providing permanent attachment, as well as a full swivel action

Extra large anvil provides a greater gripping area for securing work

C L A M P I N G

P U L L I N G

2-Ton and 5-Ton Ratcheting Puller Set

■■ Ratcheting Pullers Have a Time-Saving, Indexing-Jaw Design ■■ Legs Index Into Position and Stay in Place, Letting You Easily Support the Puller and Quickly Connect Each Jaw One at a Time to the Pulley—Without Help ■■ Pullers Can Also Be Converted to Two- and Three-Leg Pullers and the Jaws Reversed From External to Internal Style in Seconds

Cat. No.

UPC No.

3627

082171036279

Packaging

Product Weight

Boxed

5.13 lb

Cat. No.

Description

Cat. No.

Description

3624D

2 Ton Ratcheting Puller

3625

5 Ton Ratcheting Puller

2-Ton Ratcheting Puller

Ton

Reach/ Length

Jaw Capacity

Screw Size

Screw Length

Jaw Thickness

Jaw Width

Product Weight

Shelf Pack Qty.

Boxed

2-5/8 in

3-1/4 in

3/8 in - 24

4-1/2 in

3/8 in

5/8 in

2.55 lb

UPC No.

3624D

082171362408

Cat. No.

Description

Cat. No.

Description

362401

3 Pc. Legs Replacement Set

362403

Screw Replacement

362402

Yoke Replacement C L A M P I N G

5-Ton Ratcheting Puller

3625

082171362507

Packaging

Ton

Reach/ Length

Jaw Capacity

Screw Size

Screw Length

Jaw Thickness

Jaw Width

Product Weight

Shelf Pack Qty.

Boxed

4 in

5 in

9/16 in - 12

8-1/4 in

9/16 in

11/16 in

3.31 lb

Cat. No.

Description

Cat. No.

Description

362501

3 Pc. Legs Replacement Set

362503

Screw Replacement

362502

Yoke Replacement

P U L L I N G

UPC No.

Cat. No.

Packaging

Cat. No.

1137

C L A M P I N G

P U L L I N G

5-Ton Ratcheting Short / Long Leg Puller

Cat. No.

UPC No.

3628D

082171036286

Packaging

Ton

Reach/ Length

Jaw Capacity

Screw Size

Screw Length

Jaw Thickness

Jaw Width

Product Weight

Shelf Pack Qty.

Boxed

6-3/4 in

7-1/2 in

9/16 in - 12

8-1/4 in

9/16 in

11/16 in

6.22 lb

Cat. No.

Description

Cat. No.

Description

362502

Yoke Replacement

362801

3 Pc. Long Legs Replacement Set

362503

Screw Replacement

7-Ton Ratcheting Puller

C L A M P I N G

P U L L I N G

1138

Packaging

Ton

Reach/ Length

Jaw Capacity

Screw Size

Screw Length

Jaw Thickness

Jaw Width

Product Weight

Shelf Pack Qty.

Boxed

6-3/4 in

10 in

3/4 in - 12

12 in

9/16 in

11/16 in

6.80 lb

Cat. No.

UPC No.

3626

082171036262

Cat. No.

Description

Cat. No.

Description

362601

3 Pc. Legs Replacement Set

362603

Screw Replacement

362602

Yoke Replacement

C L A M P I N G

P U L L I N G

Combination 2 Jaw Reversible (Internal/External)

■■ Reversible Jaws for Internal and External Applications

Jaw Capacity

Screw Size

Screw Length

Upper Jaw Thickness

Lower Jaw Thickness

Upper Jaw Width

Lower Jaw Width

Product Weight

Shelf Pack Qty.

3/8 in - 24

4-7/8 in

3/16 in

1/8 in

5/16 in

1/2 in

1.02 lb

Cat. No.

UPC No.

Packaging

Ton

Reach/ Length

3551D

082171035517

Carded

3-1/2 in

5 in

3552

082171035524

Carded

5-3/4 in

8 in

9/16 in - 20

7 in

1/4 in

5/16 in

3/8 in

3/4 in

2.52 lb

3553D

082171035531

Carded

5 in

9 in

11/16 in - 18

7-1/2 in

3/8 in

1 in

4.52 lb

Combination 2 & 3 Jaw Reversible (Internal/ External) Pullers

■■ Reversible Jaws for Internal and External Applications ■■ Includes Blow Mold Case for Storage

3561 3562D 3563

Reach/ Length

Jaw Capacity

Lower Jaw Thickness

Upper Jaw Width

3/16 in

1/8 in

5/16 in

3/8 in

3/4 in

3/8 in

1 in

Screw Size

Screw Length

Upper Jaw Thickness

5.0 in

3/8 in - 24

4-7/8 in

8.0 in

9/16 in - 20

7 in

11/16 in - 18

7-1/2 in

Packaging

Ton

082171035616

Carded

3-1/2 in

082171035623

Carded

5-3/4 in

082171035630

Carded

5 in

9.0 in

Lower Jaw Width

Product Weight

Shelf Pack Qty.

1/2 in

1.30 lb

3/4 in

2.50 lb

6.05 lb

10 Way Slide Hammer Puller Set

■■ Provides a Wide Range of Puller Applications Such as: Flange Type Axles, Oil Seals & Other Press Fit Parts ■■ Jaws Can Be Set Up for 2 or 3 Jaw Internal or External Pulling Jobs ■■ Includes Blow Mold Case for Storage

C L A M P I N G

UPC No.

Cat. No.

UPC No.

41700D

082171041709

Packaging

Product Weight

Shelf Pack Qty.

Boxed

17.0 lb

Cat. No.

Description

Cat. No.

Description

Cat. No.

Description

3591D

5-1/2 lb. Slide Hammer Only

41706

Center Bolt & Cone

230071D

Shallow Flange

41704

2 Way Yoke

41707

3 Pc. Adapter Set

230075D

Deep Flange

41705

3 Way Yoke

41708

Leg Package & Screws

P U L L I N G

Cat. No.

1139

C L A M P I N G

P U L L I N G

Rear Axle Bearing Puller Set

■■ Three Pullers Designed to Make the Removal of Semi-Floating Rear Axle Bearings Easier ■■ 1" X 1-7/8" Puller ■■ 1-5/16 " X 2-3/8" Puller ■■ 1-3/8" X 2-7/8" Puller

Cat. No.

UPC No.

41710

082171417108

Packaging

Description

Product Weight

Shelf Pack Qty.

Boxed

Rear Axle Bearing Puller Set

3.3 lb

24" Basic Slide Hammer Unit

■■ 5 lb Hammer with a 5/8" - 18 Threaded End ■■ May Be Used With an Internal Pulling Attachment With Female or Male Female Threaded Adapters

UPC No.

3591D

082171035913

Packaging

Product Weight

Shelf Pack Qty.

Carded

7.05 lb

Cat. No.

C L A M P I N G

P U L L I N G

Split Bearing Attachments

■■ Attachments are Used for the Removal of Bearings, Thin-Faced and Cone-Shaped Gears ■■ Beveled Edge Allows Insertion Behind Pulleys, Gears or Bearings Where Space Limits the Use of a Standard Puller Jaw ■■ Grip the Part to be Pulled, then Pull with a Gear Puller

1140

Cat. No.

UPC No.

Packaging

Spread (Min, Max)

Width

Screw Size

Product Weight

Shelf Pack Qty.

83600

099575836008

Carded

1/8 in, 2 in

2-7/16 in

3/8 in - 16

1.30 lb

83601

099575836015

Carded

1/2 in, 4-5/8 in

4-3/8 in

5/8 in - 18

5.90 lb

83602

099575836022

Carded

1/2 in, 9 in

6 in

5/8 in - 18

12.70 lb

C - C L A M P S

C-Clamp Heavy Duty Pattern ■■ Made in the USA - Quality and Availability ■■ Strongest C-Clamp Produced ■■ Forcing Screw has a Square Head, Does Not Include a Handle ■■ Square Head is Deigned to be Turned with a Wrench or a 4 / 8 Point Socket Due to High Load Capacity ■■ Extra Long, Heavy Walled Hub Prevents Springing Under Full Recommended Load ■■ Forcing Screw Has a Hardened Tip, Standard V Threads ■■ Meets or Exceeds US Federal Spec. GGG-C-406D

Capacity Min.

Full Length Screw

Throat Depth

Thread Size

Length of Screw

Min. Proof

Product Weight

Shelf Pack Qty.

781412780000

Bulk

13/16 in

0 in

Yes

5/8 in

3/8 in - 16

2-1/4 in

2800 lb

0.33 lb

78-010

781412780109

Bulk

1-5/16 in

0 in

Yes

15/16 in

7/16 in - 14

2-13/16 in

5600 lb

0.72 lb

78-015

781412780154

Bulk

1-3/4 in

0 in

Yes

1-7/16 in

5/8 in - 11

4-3/16 in

8750 lb

2.33 lb

78-020

781412780208

Bulk

2-3/8 in

1/2 in

1-9/16 in

3/4 in - 10

4-1/4 in

12500 lb

3.56 lb

78-021*

781412780215

Bulk

2-3/8 in

0 in

Yes

1-9/16 in

3/4 in - 10

5 in

12500 lb

2.99 lb

78-030

781412780307

Bulk

3-5/16 in

5/8 in

2 in

7/8 in - 9

5-3/4 in

16250 lb

5.85 lb

78-031*

781412780314

Bulk

3-5/16 in

0 in

Yes

2 in

7/8 in - 9

6-11/16 in

16250 lb

5.53 lb

78-040

781412780406

Bulk

4-5/8 in

1 in

2-7/16 in

1 in - 8

7-1/16 in

20000 lb

9.66 lb

78-041*

781412780413

Bulk

4-5/8 in

0 in

Yes

2-7/16 in

1 in - 8

8-11/16 in

20000 lb

8.00 lb

78-050

781412780505

Bulk

5-3/8 in

1-1/4 in

2-7/8 in

1 in - 8

7-3/4 in

23800 lb

14.56 lb

78-051*

781412780512

Bulk

5-3/8 in

0 in

Yes

2-7/8 in

1 in - 8

9-13/16 in

23800 lb

15.79 lb

78-060

781412780604

Bulk

6-5/8 in

2-1/2 in

3-1/4 in

1-1/8 in - 7

8-3/16 in

27500 lb

14.03 lb

78-061*

781412780611

Bulk

6-5/8 in

0 in

Yes

3-1/4 in

1-1/8 in - 7

11-3/8 in

27500 lb

23.01 lb

78-080

781412780802

Bulk

8-1/4 in

2-1/4 in

3 in

1-1/4 in - 7

10-5/16 in

31250 lb

26.12 lb

78-081*

781412780819

Bulk

8-1/4 in

0 in

Yes

3 in

1-1/4 in - 7

13-9/16 in

31250 lb

27.66 lb

78-090

781412780901

Bulk

10-3/8 in

4-1/4 in

3-1/8 in

1-1/4 in - 7

10-5/16 in

35000 lb

32.29 lb

78-091*

781412780918

Bulk

10-3/8 in

0 in

Yes

3-1/8 in

1-1/4 in - 7

15-9/16 in

35000 lb

32.80 lb

78-092

781412780925

Bulk

12-1/2 in

6-3/8 in

3-1/2 in

1-1/4 in - 7

10-5/16 in

40000 lb

38.43 lb

78-093*

781412780932

Bulk

12-1/2 in

0 in

Yes

3-1/2 in

1-1/4 in - 7

15-3/8 in

40000 lb

38.27 lb

78-000

* Frame of clamp is marked with equivalent non-full length forcing screw part number

C L A M P I N G

Capacity Max.

UPC No.

Packaging

Cat. No.

/ P U L L I N G

1141

C - C L A M P S

C-Clamp General Service Pattern ■■ Made in the USA - Quality and Availability ■■ Designed for Use Where the Depth of a Deep Throat or the Extreme Strength of a Heavy Duty Pattern are Not Required ■■ Forcing Screw has a Square Head and a Sliding Handle, Standard V Threads ■■ Swivel Pad Completely Encircles the Ball Joint Providing Permanent Attachment as well as Full Swivel Action ■■ Heavy Walled Hub Supports Forcing Screw Reducing Distortion ■■ Extra Large Anvil for Greater Gripping Area ■■ Anvil is Produced to Insure a Flat Surface for Proper Alignment With Screw ■■ Meets or Exceeds US Federal Spec. GGG-C-406D

C L A M P I N G

P U L L I N G

Cat. No.

1142

UPC No.

Packaging

Capacity Max.

Capacity Min.

Full Length Screw

Throat Depth

Thread Size

Length of Screw

Min. Proof

Product Weight

Shelf Pack Qty.

78-102

781412781021

Bulk

2 in

0 in

Yes

1-3/8 in

1/2 in - 13

4-7/8 in

7500 lb

1.45 lb

78-103

781412781038

Bulk

3 in

0 in

Yes

1-3/4 in

5/8 in - 11

6-3/8 in

8750 lb

2.45 lb

78-104

781412781045

Bulk

4 in

0 in

Yes

2 in

3/4 in - 10

7-7/8 in

10000 lb

4.12 lb

78-106D

781412781069

Bulk

6 in

2 in

2-1/4 in

3/4 in - 10

7-7/8 in

11250 lb

6.34 lb

78-107*

781412781076

Bulk

6 in

0 in

Yes

2-1/4 in

3/4 in - 10

9-5/8 in

11250 lb

5.62 lb

78-108

781412781083

Bulk

8 in

4 in

2-1/4 in

3/4 in - 10

7-7/8 in

12500 lb

7.34 lb

12500 lb

7.44 lb

13750 lb

8.68 lb

78-109*

781412781090

Bulk

8 in

0 in

Yes

2-1/4 in

3/4 in - 10

11-11/16 in

78-110

781412781106

Bulk

10 in

6 in

2-3/8 in

3/4 in - 10

7-7/8 in

78-111*

781412781113

Bulk

10 in

0 in

Yes

2-3/8 in

3/4 in - 10

13-9/16 in

13750 lb

8.82 lb

78-112

781412781120

Bulk

12 in

8 in

2-5/8 in

7/8 in - 9

10-1/4 in

15000 lb

11.88 lb

78-113*

781412781137

Bulk

12 in

0 in

Yes

2-5/8 in

7/8 in - 9

16-1/4 in

15000 lb

12.73 lb

78-115

781412781151

Bulk

15 in

10 in

2-3/4 in

7/8 in - 9

10-1/4 in

16250 lb

15.50 lb

78-116*

781412781168

Bulk

15 in

0 in

Yes

2-3/4 in

7/8 in - 9

19-1/4 in

16250 lb

16.18 lb

78-118

781412781182

Bulk

18 in

13 in

2-7/8 in

7/8 in - 9

10-1/4 in

17500 lb

19.40 lb

78-119*

781412781199

Bulk

18 in

0 in

Yes

2-7/8 in

7/8 in - 9

22-1/4 in

17500 lb

19.22 lb

* Frame of clamp is marked with equivalent non-full length forcing screw part number

C - C L A M P S

C-Clamp Square Throat Pattern, Black Finish ■■ Made in the USA - Quality and Availability ■■ Designed for use Where a Super Deep Throat is Required ■■ Super Deep Square Throat Offers up to 89% More Capacity than other Patterns ■■ Forcing Screw has a Sliding Handle ■■ Swivel Pad Completely Encircles the Ball Joint Providing Permanent Attachment as well as Full Swivel Action ■■ Heavy Walled Hub Supports Forcing Screw Reducing Distortion ■■ Forcing Screw has Roll Formed Acme Threads For Greater Strength, Smoother Running, Reduced Thread Damage, Producing More Clamping Force With Less Effort ■■ Extra Large Anvil for Greater Gripping Area ■■ Anvil is Produced to Insure a Flat Surface for Proper Alignment with Screw ■■ Meets or Exceeds US Federal Spec. GGG-C-406D Packaging

Capacity Max.

Capacity Min.

Full Length Screw

Throat Depth

Thread Size

Length of Screw

Min. Proof

Product Weight

Shelf Pack Qty.

781412783032

Bulk

3 in

0 in

Yes

3-1/2 in

1/2 in - 8

4-7/8 in

3500 lb

2.92 lb

78-304

781412783049

Bulk

4 in

0 in

Yes

4-1/2 in

3/4 in - 6

7-5/8 in

4100 lb

5.33 lb

78-306

781412783063

Bulk

6 in

0 in

Yes

6-1/2 in

3/4 in - 6

9-7/8 in

5400 lb

8.54 lb

78-308

781412783087

Bulk

8 in

0 in

Yes

8-1/2 in

3/4 in - 6

12-3/8 in

5900 lb

16.34 lb

Cat. No.

UPC No.

78-303

C-Clamp Square Throat Pattern, Zinc Plated 15

■■ Made in the USA - Quality and Availability ■■ Zinc Plated Forcing Screw for use in Welding - Resists Adhesion of Welding Spatter ■■ Designed for use Where a Super Deep Throat is Required ■■ Super Deep Square Throat Offers up to 89% More Capacity than other Patterns ■■ Forcing Screw has a Sliding Handle ■■ Swivel Pad Completely Encircles the Ball Joint Providing Permanent Attachment as well as Full Swivel Action ■■ Heavy Walled Hub Supports Forcing Screw Reducing Distortion ■■ Forcing Screw has Roll Formed Acme Threads For Greater Strength, Smoother Running, Reduced Thread Damage, Producing More Clamping Force With Less Effort ■■ Extra Large Anvil for Greater Gripping Area, Produced to Insure a Flat Surface for Proper Alignment with Screw ■■ Meets or Exceeds US Federal Spec. GGG-C-406D Full Length Screw

Throat Depth

Thread Size

Length of Screw

Min. Proof

Product Weight

Shelf Pack Qty.

781412783339

Bulk

3 in

0 in

Yes

3-1/2 in

1/2 in - 8

4-7/8 in

3500 lb

3.03 lb

78-334*

781412783346

Bulk

4 in

0 in

Yes

4-1/2 in

3/4 in - 6

7-5/8 in

4100 lb

5.24 lb

78-336*

781412783360

Bulk

6 in

0 in

Yes

6-1/2 in

3/4 in - 6

9-7/8 in

5400 lb

8.76 lb

78-338*

781412783384

Bulk

8 in

0 in

Yes

8-1/2 in

3/4 in - 6

12-3/8 in

5900 lb

13.11 lb

78-333*

* Frame of clamp is marked with standard square throat part number

P U L L I N G

Capacity Min.

Capacity Max.

UPC No.

C L A M P I N G

Packaging

Cat. No.

1143

C - C L A M P S

C-Clamp Deep Throat Pattern ■■ Made in the USA - Quality and Availability ■■ Most Popular and Versatile Style C-Clamp ■■ Forcing Screw has a Sliding Handle ■■ Swivel Pad Completely Encircles the Ball Joint Providing Permanent Attachment as well as Full Swivel Action ■■ Heavy Walled Hub Supports Forcing Screw Reducing Distortion ■■ Forcing Screw has Roll Formed Acme Threads For Greater Strength, Smoother Running, Reduced Thread Damage, Producing More Clamping Force With Less Effort ■■ Extra Large Anvil for Greater Gripping Area, Produced to Insure a Flat Surface for Proper Alignment with Screw ■■ Meets or Exceeds US Federal Spec. GGG-C-406D Packaging

Capacity Max.

Capacity Min.

Full Length Screw

781412784015

Bulk

1-1/2 in

0 in

781412784022

Bulk

2 in

0 in

Cat. No.

UPC No.

78-401 78-402

Throat Depth

Thread Size

Yes

1-5/8 in

3/8 in - 16

Yes

2-5/16 in

1/2 in - 8

Length of Screw

Min. Proof

Product Weight

Shelf Pack Qty.

3-1/4 in

1400 lb

0.45 lb

4-3/4 in

3300 lb

6.41 lb

1 1

78-403

781412784039

Bulk

3 in

0 in

Yes

2-3/4 in

1/2 in - 8

5-3/4 in

3500 lb

8.20 lb

78-404

781412784046

Bulk

4 in

0 in

Yes

3-1/16 in

3/4 in - 6

7-5/8 in

4100 lb

3.55 lb

78-406

781412784060

Bulk

6 in

0 in

Yes

4-1/16 in

3/4 in - 6

9-7/8 in

5400 lb

4.95 lb

78-408

781412784084

Bulk

8 in

0 in

Yes

5 in

3/4 in - 6

12-3/8 in

5900 lb

7.56 lb

78-410

781412784107

Bulk

10 in

3 in

5-15/16 in

3/4 in - 6

12-3/8 in

6200 lb

10.35 lb

78-411

781412784114

Bulk

10 in

0 in

Yes

5-15/16 in

3/4 in - 6

14-1/2 in

6200 lb

11.51 lb

78-412

781412784121

Bulk

12 in

4 in

6-3/8 in

7/8 in - 6

13-1/2 in

9300 lb

15.00 lb

78-413

781412784138

Bulk

12 in

0 in

Yes

6-3/8 in

7/8 in - 6

16-1/2 in

9300 lb

15.37 lb

C L A M P I N G

P U L L I N G

C-Clamp Deep Throat Pattern, Zinc Plated ■■ Made in the USA - Quality and Availability ■■ Zinc Plated Forcing Screw for use in Welding - Resists Adhesion of Welding Spatter ■■ Most Popular and Versatile Style C-Clamp ■■ Forcing Screw has a Sliding Handle ■■ Swivel Pad Completely Encircles the Ball Joint Providing Permanent Attachment as well as Full Swivel Action ■■ Heavy Walled Hub Supports Forcing Screw Reducing Distortion ■■ Forcing Screw has Roll Formed Acme Threads For Greater Strength, Smoother Running, Reduced Thread Damage, Producing More Clamping Force With Less Effort ■■ Extra Large Anvil for Greater Gripping Area, Produced to Insure a Flat Surface for Proper Alignment with Screw ■■ Meets or Exceeds US Federal Spec. GGG-C-406D Packaging

Capacity Max.

Capacity Min.

Full Length Screw

Throat Depth

Thread Size

Length of Screw

Min. Proof

Product Weight

Shelf Pack Qty.

781412784312

Bulk

1-1/2 in

0 in

Yes

1-3/8 in

3/8 in - 16

3-1/4 in

1400 lb

0.44 lb

78-432*

781412784329

Bulk

2 in

0 in

Yes

2 in

1/2 in - 8

4-3/4 in

3300 lb

1.36 lb

78-433*

781412784336

Bulk

3 in

0 in

Yes

2-3/8 in

1/2 in - 8

5-3/4 in

3500 lb

2.11 lb

78-434*

781412784343

Bulk

4 in

0 in

Yes

2-3/4 in

3/4 in - 6

7-5/8 in

4100 lb

3.50 lb

Cat. No.

UPC No.

78-431*

78-436*

781412784367

Bulk

6 in

0 in

Yes

3-5/8 in

3/4 in - 6

9-7/8 in

5400 lb

6.61 lb

78-438*

781412784381

Bulk

8 in

0 in

Yes

4-1/2 in

3/4 in - 6

12-3/8 in

5900 lb

7.50 lb

78-440*

781412784404

Bulk

10 in

3 in

5-3/8 in

3/4 in - 6

12-3/8 in

6200 lb

10.34 lb

78-441*

781412784411

Bulk

10 in

0 in

Yes

5-3/8 in

3/4 in - 6

14-1/2 in

6200 lb

9.90 lb

78-442*

781412784428

Bulk

12 in

4 in

5-3/4 in

7/8 in - 6

13-1/2 in

9300 lb

15.05 lb

78-443*

781412784435

Bulk

12 in

0 in

Yes

5-3/4 in

7/8 in - 6

16-1/2 in

9300 lb

15.32 lb

* Frame of clamp is marked with standard deep throat part number

1144

C - C L A M P S

C-Clamp Deep Throat Pattern, High Visibility Finish, Safety Yellow ■■ Made in the USA - Quality and Availability ■■ Finished in a Safety Yellow Baked-on High-Gloss Enamel Finish for High Visibility ■■ Product is Marked with Deep Throat Pattern Part Number ■■ Most Popular and Versatile Style C-Clamp ■■ Forcing Screw has a Sliding Handle ■■ Swivel Pad Completely Encircles the Ball Joint Providing Permanent Attachment as well as Full Swivel Action ■■ Heavy Walled Hub Supports Forcing Screw Reducing Distortion ■■ Forcing Screw has Roll Formed Acme Threads For Greater Strength, Smoother Running, Reduced Thread Damage, Producing More Clamping Force With Less Effort ■■ Extra Large Anvil for Greater Gripping Area, Produced to Insure a Flat Surface for Proper Alignment with Screw ■■ Meets or Exceeds US Federal Spec. GGG-C-406D Packaging

Capacity Max.

Capacity Min.

Full Length Screw

781412786019

Bulk

1-1/2 in

0 in

781412786026

Bulk

2 in

0 in

78-603*

781412786033

Bulk

3 in

0 in

Yes

78-604*

781412786040

Bulk

4 in

0 in

Yes

Cat. No.

UPC No.

78-601* 78-602*

Throat Depth

Thread Size

Length of Screw

Min. Proof

Product Weight

Shelf Pack Qty.

Yes

1-5/8 in

3/8 in - 16

Yes

2-15/16 in

1/2 in - 8

3-1/4 in

1400 lb

0.48 lb

4-3/4 in

3300 lb

1.38 lb

2-3/4 in

1/2 in - 8

5-3/4 in

3-13/16 in

3/4 in - 6

7-5/8 in

3500 lb

2.14 lb

4100 lb

3.41 lb

78-606*

781412786064

Bulk

6 in

0 in

Yes

4-1/16 in

3/4 in - 6

9-7/8 in

5400 lb

4.77 lb

78-608*

781412786088

Bulk

8 in

0 in

Yes

5 in

3/4 in - 6

12-3/8 in

5900 lb

6.72 lb

78-610*

781412786101

Bulk

10 in

3 in

5-15/16 in

3/4 in - 6

12-3/8 in

6200 lb

10.52 lb

78-612*

781412786125

Bulk

12 in

4 in

6-3/8 in

7/8 in - 6

13-1/2 in

9300 lb

14.77 lb

* Frame of clamp is marked with standard deep throat part number

15 C L A M P I N G / P U L L I N G

1145

C - C L A M P S

C-Clamp Deep Throat Pattern, High Visibility Finish, Safety Orange ■■ Made in the USA - Quality and Availability ■■ Finished in a Safety Orange Baked-on High-Gloss Enamel Finish for High Visibility ■■ Product is Marked with Deep Throat Pattern Part Number ■■ Most Popular and Versatile Style C-Clamp ■■ Forcing Screw has a Sliding Handle ■■ Swivel Pad Completely Encircles the Ball Joint Providing Permanent Attachment as well as Full Swivel Action ■■ Heavy Walled Hub Supports Forcing Screw Reducing Distortion ■■ Forcing Screw has Roll Formed Acme Threads For Greater Strength, Smoother Running, Reduced Thread Damage, Producing More Clamping Force With Less Effort ■■ Extra Large Anvil for Greater Gripping Area, Produced to Insure a Flat Surface for Proper Alignment with Screw ■■ Meets or Exceeds US Federal Spec. GGG-C-406D Packaging

Capacity Max.

Capacity Min.

Full Length Screw

781412786316

Bulk

1-1/2 in

0 in

781412786323

Bulk

2 in

0 in

78-633*

781412786330

Bulk

3 in

0 in

Yes

78-634*

781412786347

Bulk

4 in

0 in

Yes

Cat. No.

UPC No.

78-631* 78-632*

15 P U L L I N G / C L A M P I N G

Thread Size

Yes

1-5/8 in

3/8 in - 16

Yes

2-5/16 in

1/2 in - 8

2-3/4 in

1/2 in - 8

3-13/16 in

3/4 in - 6

Length of Screw

Min. Proof

Product Weight

Shelf Pack Qty.

3-1/4 in

1400 lb

0.48 lb

4-3/4 in

3300 lb

1.38 lb

5-3/4 in

3500 lb

2.26 lb

7-5/8 in

4100 lb

3.63 lb

78-636*

781412786361

Bulk

6 in

0 in

Yes

4-1/16 in

3/4 in - 6

9-7/8 in

5400 lb

5.05 lb

78-638*

781412786385

Bulk

8 in

0 in

Yes

5 in

3/4 in - 6

12-3/8 in

5900 lb

7.24 lb

78-640*

781412786408

Bulk

10 in

3 in

5-15/16 in

3/4 in - 6

12-3/8 in

6200 lb

10.67 lb

78-642*

781412786422

Bulk

12 in

4 in

6-3/8 in

7/8 in - 6

13-1/2 in

9300 lb

14.79 lb

* Frame of clamp is marked with standard deep throat part number

1146

Throat Depth

L I F T I N G

E Y E S

Shoulder Pattern Lifting Eyes ■■ Made in the USA - Quality and Availability ■■ Maximum Working Loads Were Determined and Actual Lifts Should be Accomplished By Using a Very Slow, Steady Pull ■■ Lifting Eyes Are Available In 2 Styles; Shoulder Pattern and Plain Pattern With Both Patterns Suitable for Vertical Lifts ■■ Angular Lifts Place Additional Stress On a Lifting Eye and Should be Avoided ■■ Shoulder Pattern Lifting Eyes Are Recommended for Use Whenever Possible Since There is No Guarantee That a Load Will Not be Subjected to An Angular Lift and Forces ■■ Plain Pattern Lifting Eyes Should be Firmly Seated With At Least 90% Of the Thread Engaged With the Treads Close to the Eye Fully Engaged ■■ Lifting Eyes Should Never be Ground, Machined, Metal Stamped, or Altered in Any Way ■■ Lifting Eyes Capabilities Can be Affected by Temperature ■■ Lifting Eyes Should be Routinely Inspected ■■ Meets or Exceeds ASME B18.15-2008

Cat. No.

UPC No.

89-021

781412890211

Packaging

Thread Size

Length Under Eye

Eye Diameter; Inside

Eye Diameter; Outside

Max. Load 0°

Max. Load 30°

Max. Load 45°

Product Weight

Shelf Pack Qty.

Bagged

1/4 in -20

1 in

3/4 in

1-3/16 in

500 lb

75 lb

N/A

0.05 lb

1-1/8 in

7/8 in

1-7/16 in

800 lb

225 lb

N/A

0.08 lb

89-022

781412890228

Bagged

5/16 in -18

89-023

781412890235

Bagged

3/8 in -16

1-1/4 in

1 in

1-21/32 in

1400 lb

650 lb

350 lb

0.13 lb

1-3/8 in

1-3/32 in

1-27/32 in

2000 lb

1000 lb

500 lb

0.25 lb

Bagged

89-025

781412890259

Bagged

1/2 in -13

1-1/2 in

1-3/16 in

2-1/16 in

2600 lb

1200 lb

650 lb

0.35 lb

89-026

781412890266

Bagged

9/16 in -12

1-5/8 in

1-9/32 in

2-9/32 in

3000 lb

1600 lb

900 lb

0.54 lb

89-027

781412890273

Bagged

5/8 in -11

1-3/4 in

1-3/8 in

2-1/2 in

4000 lb

2000 lb

1200 lb

0.83 lb

89-028

781412890280

Bagged

3/4 in -10

2 in

1-1/2 in

2-13/16 in

6000 lb

3200 lb

2200 lb

1.36 lb

89-029

781412890297

Bagged

7/8 in -9

2-1/4 in

1-11/16 in

3-1/4 in

7200 lb

3800 lb

2500 lb

2.09 lb

89-030

781412890303

Bagged

1 in -8

2-1/2 in

1-13/16 in

3-9/16 in

9500 lb

5000 lb

3600 lb

2.92 lb

89-031

781412890310

Bagged

1-1/8 in -7

2-3/4 in

2 in

4 in

11800 lb

5500 lb

4500 lb

3.40 lb

89-032

781412890327

Bagged

1-1/4 in -7

3 in

2-3/16 in

4-7/16 in

15000 lb

7000 lb

5200 lb

4.67 lb

89-034

781412890341

Bagged

1-1/2 in -6

3-1/2 in

2-1/2 in

5-3/16 in

21700 lb

10500 lb

7200 lb

7.28 lb

89-035

781412890358

Bulk with UPC

1-3/4 in -5

3-3/4 in

2-7/8 in

6-1/16 in

29500 lb

14000 lb

10500 lb

11.79 lb

89-036

781412890365

Bulk with UPC

2 in 4-1/2

4 in

3-1/4 in

6-7/8 in

38500 lb

18000 lb

13500 lb

14.55 lb

C L A M P I N G

781412890242

89-024

7/16 in -14

/ P U L L I N G

1147

L I F T I N G

E Y E S

Plain Pattern Lifting Eyes

C L A M P I N G

P U L L I N G

■■ Made in the USA - Quality and Availability ■■ Maximum Working Loads Were Determined and Actual Lifts Should be Accomplished By Using a Very Slow, Steady Pull ■■ Lifting Eyes Are Available In 2 Styles; Shoulder Pattern and Plain Pattern With Both Patterns Suitable for Vertical Lifts ■■ Angular Lifts Place Additional Stress On a Lifting Eye and Should be Avoided ■■ Shoulder Pattern Lifting Eyes Are Recommended for Use Whenever Possible Since There is No Guarantee That a Load Will Not be Subjected to An Angular Lift and Forces ■■ Plain Pattern Lifting Eyes Should be Firmly Seated With At Least 90% Of the Thread Engaged With the Treads Close to the Eye Fully Engaged ■■ Lifting Eyes Should Never be Ground, Machined, Metal Stamped, or Altered in Any Way ■■ Lifting Eyes Capabilities Can be Affected by Temperature ■■ Lifting Eyes Should be Routinely Inspected ■■ Meets or Exceeds ASME B18.15-2008

Cat. No.

UPC No.

89-001

781412890013

Packaging

Thread Size

Length Under Eye

Eye Diameter; Inside

Eye Diameter; Outside

Max. Load 0°

Max. Load 30°

Max. Load 45°

Product Weight

Shelf Pack Qty.

Bagged

1/4 in -20

1 in

3/4 in

1-3/16 in

500 lb

N/A

0.10 lb

1-1/8 in

7/8 in

1-7/16 in

800 lb

N/A

0.17 lb

89-002

781412890020

Bagged

5/16 in -18

89-003

781412890037

Bagged

3/8 in -16

1-1/4 in

1 in

1-21/32 in

1400 lb

N/A

0.19 lb

1-3/8 in

1-3/32 in

1-27/32 in

2000 lb

N/A

0.23 lb

89-004

781412890044

Bagged

7/16 in -14

89-005

781412890051

Bagged

1/2 in -13

1-1/2 in

1-3/16 in

2-1/16 in

2600 lb

N/A

0.30 lb

89-006

781412890068

Bagged

9/16 in -12

1-5/8 in

1-9/32 in

2-9/32 in

3000 lb

N/A

0.44 lb

89-007

781412890075

Bagged

5/8 in -11

1-3/4 in

1-3/8 in

2-1/2 in

4000 lb

N/A

0.62 lb

89-008

781412890082

Bagged

3/4 in -10

2 in

1-1/2 in

2-13/16 in

6000 lb

N/A

0.82 lb

89-009

781412890099

Bagged

7/8 in -9

2-1/4 in

1-11/16 in

3-1/4 in

7200 lb

N/A

1.50 lb

89-010

781412890105

Bagged

1 in -8

2-1/2 in

1-13/16 in

3-9/16 in

9500 lb

N/A

2.06 lb

89-011

781412890112

Bagged

1-1/8 in -7

2-3/4 in

2 in

4 in

11800 lb

N/A

2.96 lb

89-012

781412890129

Bagged

1-1/4 in -7

3 in

2-3/16 in

4-7/16 in

15000 lb

N/A

3.87 lb

89-014

781412890143

Bagged

1-1/2 in -6

3-1/2 in

2-1/2 in

5-3/16 in

21700 lb

N/A

6.73 lb

LIFTING EYE SAFETY The dangers inherent in any lifting operation are obvious. Yet every year, accidents occur which could have been avoided by applying the simplest, most fundamental safety precautions. 1. Read and follow all of the suggestions stated in the “Manual of Proper Uses of Forged Lifting Eyes (Eye Bolts),” BEFORE attempting to use Lifting Eyes in any application. A copy is on the following page of this catalog. 2. ALWAYS stay well clear of the load. 3. DO NOT use Lifting Eyes for angular lifts unless ABSOLUTELY necessary. If angular lifts CANNOT be avoided, then ONLY Shoulder Pattern Lifting Eyes-which are specifically designed for this application-should be used. 4. Armstrong Carbon Steel Lifting Eyes must NEVER be welded. 5. DO NOT use Carbon Steel Lifting Eyes at temperatures below 32°F (0°C). 6. NEVER exceed the MAXIMUM Working Load of a Lifting Eye.

1148

L I F T I N G

E Y E S

Proper Uses of Forged Lifting Eyes (Eye Bolts) HOW RECOMMENDED STATIC WORKING LOADS ARE DETERMINED Lifting Eye manufacturers provided recommended static working loads for their standard lifting eyes. These static working loads are shown in the manufacturers’ catalogs and have been determined by multiplying the tensile strength of the lifting eye material, after heat treating, by the tensile stress area of the threaded lifting eye shank. The product of this multiplication is the maximum ultimate strength of the lifting eye. Dividing this figure by a factor of five provides the recommended static working load for a straight vertical lift. More complete information may be found in ASTM A 489, Standard Spec. for Carbon Steel Lifting Eyes.

ANGULAR LIFTS An angular lift (see figure 1) places additional stresses on a lifting eye, above that of the load to be hoisted. For this reason, use of angular lifts should be avoided whenever possible. If, however, the situation necessitates an angular lift, a properly selected and inserted lifting eye must be used, and a reduction in the rated capacity must be applied. Angular lifts of 30° (figure 1) apply additional stresses and necessitate reduced working loads.

SHOULDER PATTERN LIFTING EYES (EYE BOLTS) ARE PREFERABLE In theory, plain pattern and shoulder pattern lifting eyes are equally suitable for vertical lifts. But since there is no guarantee that a load will never be subjected to an angular lift, shoulder pattern lifting eyes are recommended for use wherever possible. When a shoulder pattern lifting eye is properly seated in the receiving hole, the shoulder bears against the seat and reduces bending stress on the shank.

Loads should always be applied to lifting eyes in the plane of the eye, not at some angle to this plane. Therefore, the direction of the load should be taken into account when seating the lifting eye. Before lifting the load, but with the load lines under tension, check to see if the lifting eyes are properly positioned.

DIA x 1/4 MIN

FULL THD

DIA x 1/8 x 45° MIN. DEPTH

When using a plain pattern lifting eye, be sure the bolt is firmly seated by hand with at least 90% of the thread engaged in the receiving hole with the full threads close to the eye fully engaged.

BOLT DIA + 10% APPROX.

C L A M P I N G

Shoulder pattern lifting eyes should always be screwed in so as to firmly seat the shoulder, with at least 90% of the thread engaged. To facilitate this, the receiving hole should be machine countersunk. (See figure 2.) If countersinking is impossible, a minimum number of washers should be used to build up the surface of the load until the shoulder can be firmly seated by hand. Be sure at least 90% of the threads are engaged in the receiving hole with a minimum thread engagement of at least 1-1/2 times the thread diameter in steel when this method is used.

SEATING OF LIFTING EYES (EYE BOLTS)

In order to obtain the maximum strength from an eye bolt, considerable care must be given to the receiving hole into which the bold will be screwed. (See Figure 2) Tap the correct class fit thread to accommodate the full length of the lifting eye shank. This is important because recommended capacities apply only when a minimum 90% of the threaded shank is engaged. For shoulder pattern lifting eyes, counterbore the hole to insure proper seating of the shoulder, as described previously.

P U L L I N G

RECEIVING HOLE

CHIP CLEAR TAP DRILL

1149

L I F T I N G

E Y E S

CHECK SEATING AFTER APPLYING ANGULAR LIFT

LOW TEMPERATURE SERVICE

Immediately after applying an angular load to a shoulder pattern lifting eye, check to be sure the shoulder is still firmly engaged. This is important, since the initial lift may cause the bolt to back off, away from the load. In such cases, the lifting eye should be unloaded and the lifting eye properly reseated.

Low temperature service poses additional problems. It is mandatory that all safety precautions be rigidly adhered to.

THREAD ENGAGEMENT The minimum thread engagement should be at least 1-1/2 times the thread diameter in steel. Refer to ASME/ASME B18.15, Forged Lifting Eyes (Eye Bolts), for engagements in other materials.

(b) Under minus 400F (-400C) Use austenitic type steel. A reduction in rated load may occur.

DAMAGED THREADS

Undercutting of lifting eyes to provide clearance in a noncounterbore/countersunk hole is not recommended.

Lifting eyes with worn, chipped, or otherwise damaged threads should be immediately destroyed. Such damage weakens the lifting eye and can cause improper seating.

Shock or rapid loading is inherently dangerous. All loads should be applied in a gradually increasing manner.

ALWAYS STAND CLEAR Never stand, work or crawl under the load. If the load could swing, or if the pieces could fly in the event of a drop, allow for this possibility by establishing a safe distance between yourself and the load.

INSPECTION Lifting eyes should be routinely inspected for such conditions as:

A. Elongated or bent eye section. B. Elongated or bent shank. C. Nicks and gouges. D. Obvious wear. E. Worn, corroded and/or distorted threads. F. Cracks found by non-destructive testing. G. Absence of sufficient identifying markings.

If any of these conditions exist, the lifting eye should be removed from service and destroyed.

DON'T OVERLOAD Follow carefully the working load recommendations of the manufacturer of the lifting eye you are using.

(a) To minus 400F (-400C): Heat treated low carbon alloy steel ASTM specification F541, Alloy Steel Lifting Eyes, should be used as a guide.

UNDERCUT LIFTING EYES (EYE BOLTS)

DYNAMIC LOADING

ALTERING OF LIFTING EYES (EYE BOLTS) Lifting eyes should never be ground, machined, metal stamped or altered in any way, since such operation is likely to weaken the bolt. Lifting eyes showing signs of having been so treated should immediately be destroyed.

In addition, the receiving hole should be carefully cleaned and inspected for worn threads or other thread deterioration prior to each insertion of the lifting eye. Any lifting eye should be removed from service and destroyed when the manufacturer’s identifying marks are no longer readily identifiable to guarantee proper reference for continued safe usage.

HOW TO DESTROY Lifting eyes that are being replaced should be rendered unusable. Crushing or cutting across the eye is recommended.

EXTREME HEAT Lifting eyes should never be welded, used at, or subjected to temperatures above 275°F (135°C). Important physical properties are likely to be changed by such heating, creating an unsafe bolt. Lifting eyes showing signs of such heating should be immediately destroyed.

C L A M P I N G

P U L L I N G

At temperatures below 300F(-10C), carbon steel, normally used for standard lifting eyes, is subject to a decrease in shock resistance and ductility at the lower temperatures.

1150

Set-Up Wedges ■■ Made in the USA - Quality and Availability

Cat. No.

UPC No.

79-493

781412794939

Packaging

Length

Width

Height

Product Weight

Shelf Pack Qty.

Bagged

3.000 in

1.000 in

0.250 in

0.11 lb

79-495

781412794953

Bagged

5.000 in

1.000 in

0.500 in

0.31 lb

79-496

781412794960

Bagged

6.000 in

1.250 in

0.750 in

0.68 lb

A U T O M O T I V E

S P E C I A L T Y

Service Kits........................................ 1153 Engine Tools...................................... 1162 Fuel Tools........................................... 1167 Piston Service.................................... 1179 Valve Tools......................................... 1183 Exhaust.............................................. 1185 Battery................................................ 1188 Electrical............................................ 1190 Ignition............................................... 1191 Spark Plug......................................... 1193 Body Tools......................................... 1196 Brake Service.................................... 1205 Brake Bleeding.................................. 1208 Brake Tubing..................................... 1212 16

Brake Hones...................................... 1215 Brake Measure.................................. 1216 Wheel Tools....................................... 1219 Oil Filter Wrenches............................ 1224

Suspension........................................ 1235

Snap Rings......................................... 1238 General Purpose................................ 1238

S P E C I A L T Y

Drive Train......................................... 1236

A U T O

Steering.............................................. 1231

1151

A U T O M O T I V E

S P E C I A L T Y

Auto Specialty Since our beginning, Gearwrench automotive specialty tools have been driven by innovation. From our first specialty tool, the Model-T valve spring lifter, to our latest Ratcheting Puller, we’ve built our reputation with tools that make tough jobs easy. ®

Most of our products have been upgraded with new improved features like dual material handles designed for a more comfortable grip or dual dipped handles on pliers providing more cushion for your hands. Gearwrench® automotive specialty tools are proudly made with the finest components under the most stringent manufacturing guidelines. Made for everyday use – guaranteed for life. Better tools mean easier, more efficient work so we constantly evaluate automotive engineering trends allowing us to consistently improve and enhance our tools to better fit professional hands. That’s why they are the first choice for thousands of automotive technicians worldwide.

AUTOMOTIVE SERVICE KITS Service kits, such as this disc/drum brake kit, contain all the tools required for a specific applications. Most are available in a convenient and sturdy case.

TESTING EQUIPMENT

SPECIALIZED APPLICATION TOOLS

Easy to use locking feature

A U T O

S P E C I A L T Y

GearWrench offers a wide range of automotive testing equipment such as this universal compression tester kit

GearWrench offers an ever growing variety of automotive specialized application tools designed to last and make the professionals job easier

1152

Dual dipped grip for comfort and force

S E R V I C E

K I T S

12 Pc. Fuel & Trans Line Disconnect Set

■■ Disconnect Tools that Separate Fittings on Fuel, Filter, Transmission, Air Conditioning Systems and Fuel Tank Return Lines on Most Vehicles, Trucks and Other Heavy Equipment

Cat. No.

UPC No.

Packaging

Description

Product Weight

Shelf Pack Qty.

41500

082171415005

Boxed

12 Pc. Fuel & Trans Line Disconnect Set

3.53 lb

Cat. No.

3321

Description

Cat. No.

Description

Fuel Line Quick Disconnect Tool

3894

Ford Auto Transmission to Radiator Line Disconnect Tool

3408D

Ford Fuel Line Coupling Tool

3895D

Disconnect for Fuel Lines Sizes 1/4" - Black

3413D

Ford Clutch Coupling Tool

3896D

Disconnect for Fuel Lines Sizes 5/16" - Red

3890D

Chrysler Quick Disconnect Tool

3897D

Disconnect for Fuel Lines Sizes 3/8" - Gold

3891D

GM Transmission Oil Cooler Line Disconnect Tool

3898D

Disconnect for Oil Cooler Line - Blue

3892D

GM Hydraulic Clutch Line Disconnect Tool

3893D

Transmission Oil Cooler Line Disconnect Tool

Replacement Bands

16 Pc. Brake Service Set

■■ Kit Works on both Disc and Drum Brake Systems ■■ Use to Adjust Clearance Between Drum Brakes And Shoe, Remove and Install Shoe Return Springs and Brake Pads ■■ Heavy Duty Brake Spreader - Use with Both a 5/16" Socket Wrench or Use By Hand ■■ Brake Lining Thickness Gauge - Color Coded Brake Gauge Identifies Thickness Levels for Brake Lining Inspection

Packaging

Description

Product Weight

Shelf Pack Qty.

41520

082171041525

Boxed

16 Pc. Brake Service Set

5.98 lb

Cat. No.

Description

Cat. No.

Description

287D

Drum Brake Adjusting Tool

80421

3/8" Drive Hex Bit Socket, 3/8"

298D

Brake Spring Pliers

80428D

3/8" Drive Hex Bit Socket, 7mm

2774D

Universal Brake Shoe Retaining Spring Tool

80429

3/8" Drive Hex Bit Socket, 8mm

3163D

Disc Brake Piston Tool

80431

3/8" Drive Hex Bit Socket, 10mm

3355D

GM-Ford Disc Brake Piston Tool

80451

3/8" Drive TORX® Press-Fit Bit Socket, T-40

3525D

Heavy Duty Brake Pad Separator

80452

3/8" Drive TORX® Press-Fit Bit Socket, T-45

3962

Brake Lining Thickness

80454

3/8" Drive TORX® Press-Fit Bit Socket, T-50

80419

3/8" Drive Hex Bit Socket, 1/4"

S P E C I A L T Y

UPC No.

A U T O

Cat. No.

1153

S E R V I C E

K I T S

11 Pc. Rear Brake Caliper Set

■■ Designed for Vehicles With Brake Pistons That are Mechanically Tied to the Parking Brake and Require a Turning Action to Push Back ■■ Set Covers Most Domestic and Import Vehicles

Cat. No.

UPC No.

Packaging

Description

Product Weight

Shelf Pack Qty.

41540

082171041549

Boxed

11 Pc. Rear Brake Caliper Set

5.14 lb

Cat. No.

Description

41541 41542

Cat. No.

Description

Cat. No.

Applicator & Pad for Brake Tool

41545

Adapter 4: 1-1/4", 2 Pin

41548D Adapter 7: 1-5/8", 2 Pin(S)

Adapter O: 2-1/2", 1 Pin

41546D Adapter 5: 1-3/8", 2 Pin, 3/8" Drive

41543

Adapter 2: 2", 3 Pin

41544

Adapter 3: 2-1/4", 3 Step

41547

Description

41549D Adapter 8: 1-7/8", 1 Pin 41550D Adapter P: 2-1/4", 1 Pin

Adapter 6: 1-5/8", 2 Pin(L)

Power Steering Pump Puller Set

■■ Removes and Installs Power Steering Pump Pulleys Off Most Domestic Vehicles Cat. No.

UPC No.

Packaging

Product Weight

Shelf Pack Qty.

41560D

082171041563

Boxed

4.23 lb

Cat. No.

Description

3893D

Transmission Oil Cooler Line Disconnect Tool

41561D

Bushing and Screw Set A

41562D

Bushing and Screw Set B

A U T O

S P E C I A L T Y

Fan Clutch Service Set

1154

■■ Covers Most Vehicles With Bolt on Pulleys and Also Newer Chrysler Engines With Press on Pulleys Requiring Special Pins to Hold Housing ■■ Features the Patented Universal Pulley Holder

Cat. No.

UPC No.

Packaging

Description

Product Weight

Shelf Pack Qty.

41580D

082171414572

Boxed

Fan Clutch Service Set

14.12 lb

Cat. No.

Description

Cat. No.

Description

3422

40mm Fan Nut Wrench

3902D

Pulley Holder Pin Set large ( 10mm, 18mm)

3473

Fan Clutch Wrench - Diesel

22mm Fan Nut Wrench

3900

Universal Pulley Holder

36mm Fan Nut Wrench

3901D

Pulley Holder Pin Set Small (8mm)

50mm Fan Nut Wrench

S E R V I C E

K I T S

Master Bolt Grip Set

■■ Works on Harmonic Balancers, Steering Wheels, Crankshaft Pulleys, and Gears ■■ Capable of Handling Almost Every Two or Three-Way Bolt Pull Possible on Most Cars, Pickups, SUV's, and Small Engines Cat. No.

UPC No.

Packaging

Product Weight

Shelf Pack Qty.

41600

082171041600

Boxed

7.16 lb

Cat. No.

Description

Cat. No.

Description

41601

3 Way Yoke for Bolt Grip Set

41604D

Bolt Sets (Zinc SAE)

41602

4 Pc. Puller Tip Set

41605

Center Screws for Puller

41603

Bolt Sets (Black Metric)

Pneumatic Tie Rod/Ball Joint Separator Kit - 3 Sizes

■■ Works With Hand and Pneumatic Air Systems to Remove Tie Rods, Ball Joint and Pitman Arm Assemblies ■■ Includes Popular Sizes: 1-1/8", 15/16", and 11/16" ■■ Chrome Plated, Protects Against Corrosion and Provides Improved Visibility ■■ Knurled Handle for Better Grip Cat. No.

UPC No.

Packaging

Description

Product Weight

Shelf Pack Qty.

41610

082171041617

Boxed

Pneumatic Tie Rod / Ball Joint Separator Kit - 3 sizes

4.70 lb

Front End Service Set

■■ Allows for Easy Removal of the Most Popular Types of Pitman Arms, Tie Rods, and Ball Joints

A U T O

UPC No.

Packaging

Description

Product Weight

Shelf Pack Qty.

41690

082171416903

Boxed

Front End Service Set

12.65 lb

Cat. No.

Description

Cat. No.

Description

Cat. No.

Description

Universal Tie Rod End Remover

2289D

Pitman Arm Puller

3917D

Tie Rod End Puller and Pitman Arm Puller

3916D

Universal Ball Joint Separator

Tie Rod Puller

S P E C I A L T Y

Cat. No.

1155

S E R V I C E

K I T S

Steering Service Set

■■ Can Remove a Steering Wheel From Most Domestic and Import Cars With or Without Telescoping Tilt Columns ■■ Use the Puller Legs With the Steering Wheel Puller to Remove Steering Wheels on Late Model GM Vehicles ■■ Steering Wheel Lock-Plate Depressor also Included Cat. No.

UPC No.

Packaging

Description

Product Weight

Shelf Pack Qty.

41620D

082171416200

Boxed

Steering Service Set

4.36 lb

Cat. No.

Description

Cat. No.

Description

2291D

Crankshaft Pulley Puller (Steering Wheel Puller)

Lock Plate Depressor Frame

3509D

Steering Wheel Lock Plate Remover

Lock Plate Remover Collars & Nut Washer

3510D

Steering Wheel Puller Legs

Screw Package

3906D

Steering Wheel Pivot Pin

Bearing Race and Seal Set

■■ Install Tapered Bearing Races and Seals Without Damage to the Component or Housing ■■ Includes a Driver Handle Plus 9 Popular Bearing and Seal Drivers Ranging From 1.565" to 3.180"

Cat. No.

UPC No.

Packaging

Description

Product Weight

Shelf Pack Qty.

41630D

082171416309

Boxed

Bearing Race and Seal Set

4.74 lb

Cat. No.

Description

Cat. No.

Description

41631D 41632

Cat. No.

Description

Driver Handle

41633

1.565" Driver

41634

Cat. No.

Description

1.750" Driver

41635

1.961" Driver

41636D

Cat. No.

Description

2.325" Driver

41637

2.555" Driver

41639

2.995" Driver

2.470" Driver

41638

2.830" Driver

41640

3.180" Driver

A U T O

S P E C I A L T Y

Axle Nut Set

1156

■■ 7 Extra Long 1/2" Drive 6 Point Metric Sockets are Ideal for Heavy-Duty Use in Removing and Installing Axle Nuts Use With a Ratchet, Breaker Bar, Impact Wrench, or Torque Wrench

Cat. No.

UPC No.

Packaging

Description

Product Weight

Shelf Pack Qty.

41650

082171416507

Boxed

Axle Nut Set

12.39 lb

Cat. No.

Description

Cat. No.

Description

3907D

29mm Deep 1/2" Dr. Deep Axle Nut Socket, GM & Ford

3908D

35mm Deep 1/2" Dr. Deep Axle Nut Socket, GM

3161D

30mm Deep 1/2" Dr. Deep Axle Nut Socket, GM

3162D

36mm Deep 1/2" Dr. Deep Axle Nut Socket, GM

3270D

32mm Deep 1/2" Dr. Deep Axle Nut Socket, Honda/Chrysler

3909D

38mm Deep 1/2" Dr. Deep Axle Nut Socket, GM & Ford

3449D

34mm Deep 1/2" Dr. Deep Axle Nut Socket, GM

S E R V I C E

K I T S

Spindle Nut Set

■■ 6 Chrome Vanadium Steel 1/2" Drive Sockets are for Most 4WD SUV's and Light Truck Axle Locknut Applications ■■ Use With a Torque Wrench, Ratchet, or Breaker Bar Cat. No.

UPC No.

Packaging

Description

Product Weight

Shelf Pack Qty.

41660D

082171416606

Boxed

Spindle Nut Set

13.48 lb

Cat. No.

Description

Cat. No.

Description

2467

4-Lug 4WD Spindle Nut Socket, 1/2 to 3/4 Ton Dana 44

3910D

4WD Spindle Puller

2770D

6-Lug 4WD Spindle Nut Socket, 3/4 to 1 Ton Dana 44

3911D

Toyota Lock Nut Tool

3195D

4-Lug Socket with Extension 1/2 Ton Dana 80

3937

4-Lug 4WD Spindle Nut Socket 1/2 Ton Dana 50

10 Way Slide Hammer Puller Set

UPC No.

41700D

082171041709

Packaging

Product Weight

Shelf Pack Qty.

Boxed

17.0 lb

Cat. No.

Description

Cat. No.

Description

Cat. No.

Description

3591D

5-1/2 lb. Slide Hammer Only

41706

Center Bolt & Cone

230071D

Shallow Flange

41704

2 Way Yoke

41707

3 Pc. Adapter Set

230075D

Deep Flange

41705

3 Way Yoke

41708

Leg Package & Screws

Rear Axle Bearing Puller Set

■■ Three Pullers Designed to Make the Removal of Semi-Floating Rear Axle Bearings Easier ■■ 1" X 1-7/8" Puller ■■ 1-5/16 " X 2-3/8" Puller ■■ 1-3/8" X 2-7/8" Puller UPC No.

41710

082171417108

Packaging

Description

Product Weight

Shelf Pack Qty.

Boxed

Rear Axle Bearing Puller Set

3.3 lb

A U T O

Cat. No.

UPC No.

41720

082171417207

Packaging

Description

Product Weight

Shelf Pack Qty.

Boxed

8 Pc. Sensor & Sending Socket Set

5.68 lb

Cat. No.

Description

Cat. No.

3919D

1/2" Drive 1-13/16" (29mm) Oil Sender Socket

3923D

3/8" Drive 1-1/16" Deep Oil Pressure Sending Socket

3920D

3/8" Drive 7/8" Slotted Socket for PVS, TVS, and O2 Socket

3924D

1/2" Drive 7/8" (22mm) Oxygen Sensor Socket

3921D

1/2" Drive 1-1/16" Thermal Sensor Socket

3925D

3/8" Drive 7/8" (22mm) Low Profile Offset Oxygen Sensor Socket

3922D

3/8" Drive 7/8" (22mm) Oxygen Sensor Socket

S P E C I A L T Y

8 Pc. Sensor & Sending Socket Set

■■ Designed for the Removal and Installation of Oxygen Sensors, Oil Pressure Sending Units, and Vacuum Switches

Description

1157

S E R V I C E

K I T S

3 Pc. Magnetic Spark Plug Set

■■ Contains Long Reach Magnetic Swivel Spark Plug Sockets ■■ Covers Sizes 5/8",13/16", and 9/16"

Cat. No.

UPC No.

41730D

082171417306

Packaging

Description

Product Weight

Shelf Pack Qty.

Boxed

3 Pc. Magnetic Spark Plug Set

1.67 lb

Cat. No.

Description

Cat. No.

Description

3931D

9/16" Spark Plug Socket - Magnetic 2.5" Length

3930D

13/16" Swivel Spark Plug Socket - Magnetic 6" Length

3928D

5/8" Swivel Spark Socket - Magnetic 6" Length

3 Pc. Magnetic Swivel Spark Plug Set

■■ Long Reach 5/8" Magnetic Swivel Spark Plug Socket Set ■■ Lengths of 4", 6", and 11"

Cat. No.

UPC No.

41740D

082171417405

Packaging

Description

Product Weight

Shelf Pack Qty.

Boxed

3 Pc. Magnetic Swivel Spark Plug Set

1.96 lb

Description

Cat. No.

Description

3927D

5/8" Swivel Spark Plug Socket - Magnetic Plug 4" Length

3929D

5/8" Swivel Spark Plug Socket - Magnetic 11" Length

3928D

5/8" Swivel Spark Socket - Magnetic 6" Length

Cat. No.

8 Pc. SAE/Metric Stud Removal Set

A U T O

S P E C I A L T Y

■■ Complete SAE and Metric Stud Remover Set Offers the Best Professional Extractors Available ■■ Designed and Tested to Reach Studs in Difficult Work Areas

1158

Cat. No.

UPC No.

41760D

082171417603

Cat. No.

Description

Packaging

Description

Product Weight

Shelf Pack Qty.

Boxed

8 Pc. SAE/Metric Stud Removal Set

2.55 lb

Cat. No.

Description

Cat. No.

Description

41761

6mm Removal Socket 3/8" Drive

41764

12mm Removal Socket 1/2" Drive

41765

3/8" Removal Socket 1/2" Drive

41762D

8mm Removal Socket 3/8" Drive

41768D

1/4" Removal Socket 3/8" Drive

41766

7/16" Removal Socket 1/2" Drive

41763D

10mm Removal Socket 1/2" Drive

41767D

5/16" Removal Socket 3/8" Drive

S E R V I C E

K I T S

General Purpose Bushing Set

■■ Perfect for Removing and Inserting Bushings in Cars, Trucks Buses, Tractors, Construction and Off-Road Equipment ■■ Set Includes Small, Medium, and Large Drivers and Bushing Adapters from 3/8" to 1-3/8"

Cat. No.

UPC No.

41780D

082171417801

Cat. No.

Description

Packaging

Description

Product Weight

Shelf Pack Qty.

Boxed

Gen Purp Bushing Set

4.04 lb

Cat. No.

Bushing Adapter (1-1/16"- 1-3/16")

Description

Cat. No.

Bushing Adapter (11/16"-13/16")

Description

Bushing Adapter (7/16"-1/2")

Bushing Adapter (1-3/16"- 1-5/16")

Bushing Adapter (13/16"-15/16")

Bushing Adapter (7/8"-1")

Bushing Adapter (1/2"-5/8")

Bushing Adapter (15/16"- 1-1/16")

Bushing Adapter (9/16"-11/16")

Bushing Adapter (1-1/4"- 1-3/8")

Bushing Adapter (15/32"-17/32")

Driver #1

Bushing Adapter (1-1/8"- 1-1/4")

Bushing Adapter (3/8"-7/16")

Driver #2

Bushing Adapter (1"-1-1/8")

Bushing Adapter (5/8"-11/16")

Driver #3

Bushing Adapter (3/4"-7/8")

Bushing Adapter (5/8"-3/4")

Driver Nut #1 and #2

9 Pc. Bushing Remover and Inserter Set

■■ Use to Remove and Insert Bushings Such As Those in Cars, Trucks, Buses, Tractors, Construction and Off-Road Equipment ■■ Sizes are Stamped on Each Bushing Adapter ■■ To Use, Select Proper Size Adapter and Drive Bushing Into Place ■■ Sizes Range from 1-5/16" to 1-3/4" UPC No.

31430

082171314308

Cat. No.

Packaging

Description

Product Weight

Shelf Pack Qty.

Boxed

9 Pc. Bushing Remover and Inserter Set

4.90 lb

Description

Cat. No.

Description

Cat. No.

Description

Bushing Adapter (1-1/2 to 1-5/8")

Bushing Adapter (1-5/16 to 1-7/16")

Bushing Adapter (1-9/32 to 1-3/4")

Bushing Adapter (1-11/32 to 1-1/2")

Bushing Adapter (1-7/16 to 1-9/16")

Driver #1

Bushing Adapter (1-3/4")

Bushing Adapter (1-9/16 to 1-11/16")

Driver Nut

UPC No.

41890

082171418907

Cat. No.

Packaging

Description

Product Weight

Shelf Pack Qty.

Boxed

6 Pc. Oil Canister Socket Set Service Kit

2.08 lb

Description

Cat. No.

Description

Cat. No.

Description

3935

24mm Oil Filter Socket

3936

29mm Oil Filter Socket

3934D

36mm Oil Filter Socket

3933D

27mm Oil Filter Socket

3932D

32mm Oil Filter Socket

3939D

38mm Oil Filter Socket

S P E C I A L T Y

Cat. No.

6 Pc. Oil Canister Socket Set Service Kit

A U T O

■■ Low Profile Sockets for Better Access

1159

S E R V I C E

K I T S

3 Pc. Oil Canister Socket Set

■■ Low Profile Sockets for Better Access

Packaging

Description

Product Weight

Shelf Pack Qty.

Boxed

3 Pc. Oil Canister Socket Set

1.15 lb

Cat. No.

UPC No.

41830

082171418303

Cat. No.

Description

Cat. No.

Description

Cat. No.

Description

27mm Oil Filter Socket

3932D

32mm Oil Filter Socket

3934D

36mm Oil Filter Socket

3933D

Tubing Service Set

■■ For Tubing Service ■■ Broad Tubing Application Including Double Flare, Bend, Cut, Ream, and Deburr

Cat. No.

UPC No.

Packaging

Description

Product Weight

Shelf Pack Qty.

41590D

082171041594

Boxed

Tubing Service Set

3.70 lb

Cat. No.

Description

Cat. No.

Description

2107D

Mini Tubing Cutter

3905D

Deburring Tool

41595

Holding Bar

2189D

Tubing Bender

41594

7 Pc. Flaring Adapter Kit

41596

Yoke For Flaring Tool

Cat. No.

Description

A U T O

S P E C I A L T Y

Double Flaring Tool Kit

1160

■■ Complete Double Faring Tool Assortment ■■ Slots on Yoke Firmly Engage with Bar Assembly ■■ Includes Corresponding Adapters for Forming Double Flares ■■ Forged Alloy Steel and Hardened ■■ Precisely Flares Tubing Up to 0.040" Wall Thickness to SAE 45° Flares ■■ Hardened Bar Assembly Clamps 7 Tubing Sizes: 3/16", 1/4", 5/16", 3/8", 7/16", 5/8", and 1/2" ■■ Do Not Use on Stainless Steel Tubing ■■ Additional Set Contents: SAE Bar Assembly, Yoke Assembly, Reamer, 3/16" Flaring Tool Adapter, 1/4" Flaring Tool Adapter, 5/16" Flaring Tool Adapter, 3/8" Flaring Tool Adapter, 7/16" Flaring Tool Adapter, 1/2" Flaring Tool Adapter, and 5/8" Flaring Tool Adapter Cat. No.

UPC No.

41860

082171418600

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Double Flaring Tool Kit (replaces 2199 & 3869)

4.05 lb

Cat. No.

Description

Cat. No.

Description

Cat. No.

Description

Cat. No.

Description

3905D

Deburring Tool

41594

7 Pc. Flaring Adapter Kit

41595

Holding Bar

41597

Universal Yoke

S E R V I C E

K I T S

Bubble Flaring Tool Kit

■■ Complete Bubble Flaring Tool Assortment ■■ Slots on Yoke Firmly Engage with Bar Assembly ■■ Includes Corresponding Adapters for Forming Double Flares ■■ Forged Alloy Steel and Hardened ■■ Precisely Flares Tubing Up to 0.040" Wall Thickness to Metric 45° Flares ■■ Hardened Bar Assembly Clamps 4 Tubing Sizes: 4.7, 6, 8, & 10mm ■■ Do Not Use on Stainless Steel Tubing ■■ Additional Set Contents: Metric Bar Assembly, Yoke Assembly, Reamer, 47mm Flaring Tool Adapter, 6mm Flaring Tool Adapter, 8mm Flaring Tool Adapter, and 10mm Flaring Tool Adapter Cat. No.

UPC No.

41870

082171418709

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Bubble Flaring Tool Kit (replaces 3482)

4.35 lb

Cat. No.

Description

Cat. No.

Description

Cat. No.

Description

Cat. No.

Description

3905D

Deburring Tool

41597

Universal Yoke

41598D

Bubble Flaring Tool Holding Bar

41599

4 Pc. Bubble Flaring Adapter Kit

Combined Double / Bubble Flaring Tool Kit

Packaging

Description

Product Weight

Shelf Pack Qty.

Boxed

Combined Double / Bubble Flaring Tool Kit

7.35 lb

■■ Complete Double and Bubble Flaring Tool Assortment ■■ Slots on Yoke Firmly Engage with Bar Assembly ■■ Includes Corresponding Adapters for Forming Double Flares ■■ Forged Alloy Steel and Hardened ■■ Precisely Flares Tubing Up to 0.040" Wall Thickness to SAE/Metric 45° Flares ■■ Hardened Bar Assembly Clamps 11 Tubing Sizes: 3/16", 1/4", 5/16", 3/8", 7/16", 5/8", 1/2", 47, 6, 8, and 10mm ■■ Additional Set Contents: SAE Bar Assembly, Metric Bar Assembly, Yoke Assembly, Reamer, Cutter, 3/16" Flaring Tool Adapter, 1/4" Flaring Tool Adapter, 5/16" Flaring Tool Adapter, 3/8" Flaring Tool Adapter, 7/16" Flaring Tool Adapter, 1/2" Flaring Tool Adapter, 5/8" Flaring Tool Adapter, 4.7 mm Flaring Tool Adapter, 6mm Flaring Tool Adapter, 8mm Flaring Tool Adapter, 10mm Flaring Tool Adapter, and Cutter UPC No.

41880D

082171418808

Cat. No.

Description

Cat. No.

Description

Cat. No.

Description

Cat. No.

Description

3905D

Deburring Tool

41597

Universal Yoke

41598D

Bubble Flaring Tool Holding Bar

41599

4 Pc. Bubble Flaring Adapter Kit

41595

Holding Bar

Cat. No.

UPC No.

41680D

082171416804

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Radio Removal & Antenna Wrench Set

2.06 lb

S P E C I A L T Y

Radio Removal & Antenna Wrench Set

■■ Includes the Tools Needed to Remove the Radio From the Dash on Many Domestic and Import Vehicles Without Damage to the Radio or the Dash Panel ■■ Antenna Nut Sockets Fit Over Antennas and Down Into Deep Well Locations ■■ Set Includes: Radio Removal Tool, Key Set, Antenna Nut Socket Set

A U T O

Cat. No.

1161

E N G I N E

T O O L S

Mechanic’s Stethoscope

UPC No.

835D

082171008351

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Mechanic's Stethoscope

0.25 lb

Small Hose Pinch-Off Pliers, 3/4" O.D. Capacity

■■ Ideal for Use on Radiator Hoses, Heater Hoses, Water, Air, Vacuum and Fuel Lines ■■ Capacity 3/4" Outside Diameter ■■ Extra Long Cushioned Hand Grips for Comfort and Control ■■ Clamping Mechanism Locks Automatically - No Screws Or Levers to Set Or Adjust ■■ Black Oxide Coated to Resist Rust and Corrosion Cat. No.

UPC No.

3791

082171037917

Packaging

Length

Jaw Capacity

Product Weight

Shelf Pack Qty.

Carded

5-1/2 in

3/4 in

0.43 lb

A U T O

S P E C I A L T Y

Medium Hose Pinch-Off Pliers, 1-1/4" O.D. Capacity

■■ Ideal for Use on Radiator Hoses, Heater Hoses, Water, Air, Vacuum and Fuel Lines ■■ Capacity 1-1/4" Outside Diameter ■■ Extra Long Cushioned Hand Grips for Comfort and Control ■■ Clamping Mechanism Locks Automatically - No Screws Or Levers to Set Or Adjust ■■ Black Oxide Coated to Resist Rust and Corrosion

Cat. No.

UPC No.

3792D

082171037924

Packaging

Length

Jaw Capacity

Product Weight

Shelf Pack Qty.

Carded

9-1/4 in

1-1/4 in

0.75 lb

Large Hose Pinch-Off Pliers, 2-1/2" O.D. Capacity

■■ Ideal for Use on Radiator Hoses, Heater Hoses, Water, Air, Vacuum and Fuel Lines ■■ Capacity 2-1/2" Outside Diameter ■■ Extra Long Cushioned Hand Grips for Comfort and Control ■■ Clamping Mechanism Locks Automatically - No Screws Or Levers to Set Or Adjust ■■ Black Oxide Coated to Resist Rust and Corrosion Cat. No.

UPC No.

3793

082171037931

Packaging

Length

Jaw Capacity

Product Weight

Shelf Pack Qty.

Carded

14 in

2-1/2 in

1.24 lb

Hose Pinch Off Pliers

■■ Pliers Eliminate the Need to Drain Cooling System When Servicing ■■ Pliers Squeeze Hoses Shut and Jaws Swivel for Parallel Clamping ■■ Automatic Locking Ratchet ■■ Do Not Use on Wire-Reinforced Hose

1162

Cat. No.

UPC No.

145

082171001451

Packaging

Product Weight

Shelf Pack Qty.

Carded

0.85 lb

E N G I N E

T O O L S

Corbin Style Hose Clamp Pliers

■■ For Corbin Style Hose Clamps ■■ Plier Tips Trap and Hold Clamp, and Swivel for Multiple Angle Access ■■ Easy to Use Locking Feature ■■ Dual Dipped for Additional Comfort Cat. No.

UPC No.

3975D

082171397509

■■ For Use on Hose Clamps - Flat Band ■■ Easy to Use Locking Feature ■■ Dual Dipped for Additional Comfort

Cat. No.

UPC No.

3976D

082171397608

Packaging

Product Weight

Shelf Pack Qty.

Carded

0.74 lb

Straight Hose Clamp Pliers

Packaging

Product Weight

Shelf Pack Qty.

Carded

0.75 lb

Angled Hose Clamp Pliers

■■ For Use on Hose Clamps - Flat Band ■■ Angled Jaws Give Improved Access Around Obstructions ■■ Easy to Use Locking Feature ■■ Dual Dipped for Additional Comfort

UPC No.

3977

082171397707

Packaging

Product Weight

Shelf Pack Qty.

Carded

0.84 lb

Cat. No.

Heavy-Duty Large Hose Clamp Pliers

UPC No.

3978D

082171397806

Packaging

Product Weight

Shelf Pack Qty.

Carded

0.85 lb

S P E C I A L T Y

Cat. No.

A U T O

■■ For Flat Ear Style Hose Clamps ■■ Plier Tips Trap and Hold Clamp, and Swivel for Multiple Angle Access ■■ Easy to Use Locking Feature ■■ Dual Dipped for Additional Comfort

1163

E N G I N E

T O O L S

Remote Control Starter Switch

■■ Use to Bypass the Ignition Switch on Any Engine With a Solenoid Starter Switch ■■ Switch Lets You Crank the Engine While Working in the Engine Compartment ■■ Switch is Made of Heavy-Duty Construction and Has 32"-Long Leads ■■ To Use, Connect From the Positive Battery Terminal to the Energizing Terminal of Solenoid ■■ Use the Switch for GE Generator, Starter, Electrical, Fuel Pump and Compression Tests and for Setting Ignition Points and Adjusting Tappets ■■ 6 and 12 Volt Use Only ■■ Wire Rated Capacity 8 Amp ■■ Caution: Care Should Be Taken to Keep Away From Hot or Rotating Components Cat. No.

UPC No.

124DD

082171001246

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Remote Control Starter Switch

0.40 lb

Oil-Seal Remover and Installer

■■ Tool Removes and Installs Upper Rear Main Oil Seals With Engine and Crank-Shaft in Place ■■ IWorks on Both Wick- and Neoprene-Type Seals ■■ Chinese Finger-Type Grip Won't Slip From the Seal During Installation ■■ Set Includes a Wick Seal Remover, Installer, Guide Funnels, Pusher, Offset Trimmer and Neoprene Seal Punches

Cat. No.

UPC No.

492

082171004926

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Oil-Seal Remover and Installer

0.40 lb

Flywheel Turner

A U T O

S P E C I A L T Y

■■ Hook This Tool Into Flywheel Teeth to Rotate the Crankshaft ■■ Use When Working on Clutches, Transmissions, Installing Rings or Other Jobs That Require the Crankshaft to Be in a Specific Position ■■ Spring Tension Aids Tool Engagement on the Flywheel

1164

Cat. No.

UPC No.

2270

082171022708

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Flywheel Turner

0.88 lb

Universal Compression Tester Kit

■■ This Versatile Kit Provides a Quick Method to Obtain Cylinder Compression Pressure on Engines With Deep, Recessed Spark Plugs and Difficult Access ■■ A Special Air-Hold Valve is Included for Easy Resetting of the Gauge, Which is Graduated From 10 to 300 PSI (0 to 21Kg/Cm2) ■■ Gauge Assembly Includes Pressure Relief Valve ■■ Caution: Do Not Use With Engine Running for Intended Use Only Cat. No.

UPC No.

3305D

082171033056

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Compression Tester

1.05 lb

E N G I N E

T O O L S

Compression Tester

■■ Tester Checks Cylinder Compression from 0 to 300 PSI (0 to 21 kg/cm2) ■■ Adapters fit 14 and 18mm Spark Plug Holes and Special Air-Hold Valve is included to Reset Gauge Easily ■■ Tester has a 16" Rubber Hose and is a Serviceable Product

Cat. No.

UPC No.

Packaging

Description

Product Weight

Shelf Pack Qty.

2428D

082171024283

Carded

Compression Tester

0.90 lb

242875

082171337642

Carded

Replacement Gauge

0.12 lb

4 Pc. Diesel Compression Test Kit

■■ Set Includes a Compression Gauge With Protective Boot and Special Air-Hold Valve for Easy Reset and Three Brass Adapters ■■ Brass Adapters are: 24mm X 20 to Test VW, Volvo, Audi, Dodge, Mercedes & Cummings 5.9-L; 10mm X 10 to Test GM 4.3-L 6 Cyl, 4.3-L & 5.7-L 8 Cyl, Ford/Navistar 6.9-L & 7.3-L, International Harvester 6.9-L; 10mm X 10 to Test GM 6.2-L V8 ■■ Gauge Checks from 0 to 1000 PSI (0 to 70Kg/Cm2) ■■ Features a Quick Disconnect from Gauge to Adapters ■■ Kit Comes in a Blow Mold Case Cat. No.

UPC No.

3468

082171034688

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

4 Pc. Diesel Compression Test Kit

1.45 lb

8 Pc. Air Hold and Compression Check Kit

Cat. No.

3469

UPC No.

082171034695

Description

Product Weight

Shelf Pack Qty.

Carded

8 Pc. Air Hold and Compression Check Kit

2.70 lb

1 S P E C I A L T Y

Packaging

Hand-Held Tachometer

■■ Tachometer Checks Diesels, Pumps, Compressors, Power Take-Offs and Farm and Construction Equipment Revolution Speed ■■ Tool is Ideal Where Electric Tachometer Cannot Be Used ■■ To Use, Hold Rubber Tip Against End of Rotating Shaft and Read Revolutions Per Minute Directly From Dial ■■ Range is 100 to 4000 RPM (Clockwise or Counterclockwise) ■■ Length: 4-1/4" ■■ Diameter: 2-3/4" Cat. No.

UPC No.

2967

082171029677

A U T O

■■ Set Includes a Compression Gauge With Protective Boot and Special Air-Hold Valve for Easy Reset, One Extension, Two Hand-Held Adapters and Flexible Line, With Three Brass Adapters ■■ Includes Storage Case ■■ Gauge Checks From 0 to 300 PSI (0 to 21Kg/Cm2) ■■ Brass Adapters are 10mm, 12mm & 14mm and Attach to Flex Line With 14mm & 18mm Threads ■■ Kit Comes in Blow Mold Case

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Hand-Held Tachometer

0.75 lb

1165

E N G I N E

T O O L S

14 and 18mm Air Hold Extension Hose

■■ 14" Long Hose Incorporates Special 14 and 18mm Stepped Fitting With O-Ring Seals for Universal Fit and 1/4" NPT Fitting for Easy Connection to Air Lines ■■ Used With Valve Spring Compressors 912DD, 2078D and 3271DD ■■ Long Hose is Ideal for Reaching Deep Set Spark Plug Holes

Cat. No.

UPC No.

2992D

082171029929

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

14 and 18mm Air Hold Extension Hose

0.30 lb

2 Pc. Air Hold Fitting Set

A U T O

S P E C I A L T Y

■■ Use to Apply Air Pressure to keep Valve Closed while replacing Valve Spring ■■ Set Includes 14 and 18mm Adapters Threaded for 1/4" NPT ■■ To use, Remove Spark Plug and Screw Air Hold into Port ■■ Fasten Air Hose to Fitting and Apply Pressure ■■ Use with 912DD, 2078D or 3271DD Valve Spring Compressors ■■ Caution: Vehicle must be Placed in Park/Neutral before Applying Air Pressure, otherwise Vehicle may move ■■ Keep Hands Clear of Fan, Belts and Pulleys since Slight Crankshaft Rotation will Occur

1166

Cat. No.

UPC No.

901DD

082171009013

Description

Product Weight

Shelf Pack Qty.

2 Pc. Air Hold Fitting Set

0.23 lb

Oil Pressure Check Kit

■■ Test Engine Oil Pressure at the Oil Filter on Most Passenger Cars and Light Trucks ■■ Five Different Adapters are Included for Both Domestic and Imported Engines ■■ Gauge is Calibrated From 0 to 100 PSI

Cat. No.

UPC No.

3289

082171032899

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Oil Pressure Check Kit

2.65 lb

Engine/Automatic Transmission Oil Pressure Check Kit

■■ Use on All Domestic Cars and Light Trucks, As Well As Most Import Cars and Light Trucks ■■ Kit Includes: 2-1/2" Gauge Ranging From 0 to 300 PSI, 6" Neoprene (Oil-Proof) Hose, Brass Adapters for Sae and Metric and an Instruction Sheet

Cat. No.

UPC No.

3343D

082171033438

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Engine/Automatic Trans. Oil Pressure Check Kit

1.25 lb

E N G I N E

T O O L S

12 Point Serrated Wrenches

■■ Install and Remove 12-Point (Triple Square) Metric Socket-Head Screws by Turning with a Socket or Wrench ■■ Made From Heat-Treated Alloy Steel Cat. No.

UPC No.

Packaging

2304D

082171023040

2305D

082171023057

2306D

082171023064

Description

Product Weight

Shelf Pack Qty.

Carded

8mm Serrated Wrench

0.08 lb

Carded

10mm Serrated Wrench

0.18 lb

Carded

12mm Serrated Wrench

0.22 lb

1-1/4" Scraper

■■ Stiff Tempered-Steel Blade is Ideal for Scraping Dirt, Carbon and Paint and for Applying Putty ■■ Blade is Ground to a Mirror Finish Cat. No.

UPC No.

2425D

082171024252

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

1-1/4" Scraper

0.15 lb

3" Scraper

■■ Stiff Tempered-Steel Blade is Ideal for Scraping Dirt, Carbon and Paint and for Applying Putty ■■ Blade is Ground to a Mirror Finish UPC No.

2426D

082171024269

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

3" Scraper

0.24 lb

Cat. No.

Ramo-Matic Zerk Fitting Tool

Cat. No.

UPC No.

416D

082171004162

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Ramo-Matic Zerk Fitting Tool

0.40 lb

A U T O

■■ Tool Clears Grease Fittings of Hardened Matter ■■ Fits Straight and Angled Zerk-Type Fittings ■■ To Use, Fill With Oil or Grease, Hold Against Zerk Fitting and Strike With a Hammer to Clear Away Debris

S P E C I A L T Y

2 Pc. Fuel Line Kit

■■ Set Includes Disconnect Tools for Use on Many Ford, GM and Mazda Vehicles ■■ Also Used on Chrysler and Ford A/C Line Adapters ■■ Tools Also Available Individually Cat. No.

UPC No.

61059

082171610592

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

2 Pc. Fuel Line Kit

0.30 lb

Cat. No.

Description

Cat. No.

Description

3290D

Ford A/C and Fuel Line Spring Lock Coupling Tool

3321

Fuel Line Quick Disconnect Tool

1167

E N G I N E

T O O L S

Ford A/C and Fuel Line Spring Lock Coupling Tool

■■ Most Ford Vehicles are Equipped With Spring Lock Couplings on Fuel and Air Conditioning Lines ■■ Necessary Tool Releases Locking Mechanism on All 4 Sizes: A (3/4"), B (5/8"), C (1/2") and D (3/8")

Cat. No.

UPC No.

3290D

082171032905

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Ford A/C and Fuel Line Spring Lock Coupling Tool

0.20 lb

Fuel Line Quick Disconnect Tool

■■ Tool Releases the Fuel Line Locking Mechanism on 1989 and Newer GM, 1990 and Newer Ford and Some 1990 and Newer Mazda Vehicles Fits 5/16" and 3/8" Fuel Lines

Cat. No.

UPC No.

3321

082171033216

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Fuel Line Quick Disconnect Tool

0.15 lb

A U T O

S P E C I A L T Y

5 Pc. Low Profile Fuel Line Quick Disconnect Set

1168

■■ Sizes Include: 7/8" (22mm), 3/4" (19mm), 5/8" (16mm) 3/8" (9mm) and 7/16" (8mm) ■■ Contains Five Popular Size Air Conditioning and Fuel Line Quick Disconnect Tools for Hard to Reach Areas ■■ Flexible Plastic Design Allows for Easy Application Over Tubing to Access Disconnects

Cat. No.

UPC No.

3530D

082171035302

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

5 Pc. Low Profile Fuel Line Quick Disconnect Set

0.60 lb

Ford Fuel Line Coupling Tool

■■ Use on 1990 and Newer Ford Rangers and Explorers with 4.0-L, 6-Cylinder Engines ■■ Provides Easy, Damage-Free Fuel Line Separation, at the Fuel Pressure Regulators

Cat. No.

UPC No.

3408D

082171034084

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Ford Fuel Line Coupling Tool

0.06 lb

E N G I N E

T O O L S

12 Pc. Fuel & Trans Line Disconnect Set

■■ Disconnect Tools that Separate Fittings on Fuel, Filter, Transmission, Air Conditioning Systems and Fuel Tank Return Lines on Most Vehicles, Trucks and Other Heavy Equipment

Cat. No.

UPC No.

41500

082171415005

Packaging

Description

Product Weight

Shelf Pack Qty.

Boxed

12 Pc. Fuel & Trans Line Disconnect Set

3.53 lb

Cat. No.

Description

Cat. No.

Description

3321

Fuel Line Quick Disconnect Tool

3894

Ford Auto Transmission to Radiator Line Disconnect Tool

3408D

Ford Fuel Line Coupling Tool

3895D

Disconnect for Fuel Lines Sizes 1/4" - Black

3413D

Ford Clutch Coupling Tool

3896D

Disconnect for Fuel Lines Sizes 5/16" - Red

3890D

Chrysler Quick Disconnect Tool

3897D

Disconnect for Fuel Lines Sizes 3/8" - Gold

3891D

GM Transmission Oil Cooler Line Disconnect Tool

3898D

Disconnect for Oil Cooler Line - Blue

3892D

GM Hydraulic Clutch Line Disconnect Tool

Replacement Bands

3893D

Transmission Oil Cooler Line Disconnect Tool

Chrysler Quick Line Disconnect Tool Cat. No.

UPC No.

3890D

082171389009

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Chrysler Quick Disconnect Tool

0.15 lb

GM Transmission Oil Cooler Line Disconnect Tool

■■ Works on Ford EFI Fuel Lines With Hair Pin Connectors; Works on Radiator to Transmission Oil Cooler Lines for 1987 - Current Cadillac Eldorado, Seville and Concours, Buick Riviera and Reatta, and Olds Toronado;1989 - Current GM 1/2 Ton, 3/4 Ton, and 1-Ton Pick-Ups UPC No.

3891D

082171389108

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

GM Transmission Oil Cooler Line Disconnect Tool

0.15 lb

Cat. No.

UPC No.

3892D

082171389207

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

GM Hydraulic Clutch Line Disconnect Tool

0.15 lb

S P E C I A L T Y

GM Hydraulic Clutch Line Disconnect

■■ Removes Clutch Lines From Slave Cylinders During Clutch Master Cylinder, Slave Cylinder or Clutch Assembly Service ■■ Bent End Applications: Nvg3500 Manual Transmissions on 1966-Current Full-Size 2WD and 4WD Trucks

A U T O

Cat. No.

1169

E N G I N E

T O O L S

GM Transmission Oil Cooler Line Disconnect Tool

■■ Works on Transmission Oil Cooler Lines On: 1987-Newer Olds Toronado, Buick Riviera and Reatta, Cadillac Eldorado, Seville and Concours; and 1989-Newer GM 1/2", 3/4", and 1-Ton Pickups

Cat. No.

UPC No.

3893D

082171389306

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Transmission Oil Cooler Line Disconnect Tool

0.15 lb

Ford Auto Transmission to Radiator Line Disconnect Tool

■■ Disconnects Transmission to Radiator Oil Cooler Line Quick Connect Fittings ■■ AOD, ATX, or AXOD Transmissions Cat. No.

UPC No.

3894

082171389405

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Ford Auto Transmission to Radiator Line Disconnect Tool

0.15 lb

Disconnect for Fuel Lines Sizes 1/4" - Black UPC No.

3895D

082171389504

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Disconnect for Fuel Lines Sizes 1/4" - Black

0.15 lb

Cat. No.

A U T O

S P E C I A L T Y

Disconnect for Fuel Lines Sizes 5/16" - Red Cat. No.

UPC No.

3896D

082171389603

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Disconnect for Fuel Lines Sizes 5/16" - Red

0.15 lb

■■ Also Works on 3/8" Oil Cooler Lines Cat. No.

UPC No.

3897D

082171389702

Disconnect for Fuel Lines Sizes 3/8" - Gold

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Disconnect for Fuel Lines Sizes 3/8" - Gold

0.15 lb

Disconnect for Oil Cooler Line - Blue

1170

Cat. No.

UPC No.

3898D

082171389801

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Disconnect for Oil Cooler Line - Blue

0.15 lb

E N G I N E

T O O L S

Ford 7.3L Fuel Filter Tool

■■ Design Allows for Easy Removal and Installation of Ford 7.3L Diesel Fuel Caps and Other Diesel Filter Systems Using the Same Configuration ■■ Works With Fuel Caps From 1995 and Newer ■■ Improves Ability to Remove and Install Caps Where Access is a Problem ■■ Patented Cat. No.

UPC No.

3526D

082171035265

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Ford 7.3L Fuel Filter Tool

0.40 lb

33 Pc. Fuel Injection System Tool Kit

■■ Set Includes Fuel Line Pressure Gauges, Adapters, and Other Components Required to Work on Fuel Injection Systems ■■ Includes Storage Case

Cat. No.

UPC No.

3467

082171034671

Packaging

Description

Product Weight

Shelf Pack Qty.

Boxed

33 Pc. Fuel Injection System Tool Kit

8.60 lb

Fuel Pump Vacuum and Pressure Tester

Cat. No.

UPC No.

2521D

082171025211

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Fuel Pump Vacuum and Pressure Tester

0.55 lb

■■ Test for Fuel Line Pressure and Vacuum Leaks and Check for Leaky Valves, Timing, Fuel Pump Vacuum and Pressure and Gas Line Leakage ■■ Tester is Equipped With an Easy-To-Read Gauge With a 3" Hose and a Vacuum Hose Adapter Fitting ■■ Gauge Measures Vacuum From 0 to 28" Hg in 1" Increments (0 to 700mm Hg in 50mm Increments) ■■ Also Measures Pressure From 0 to 15 PSI in 1/2 PSI Increments (0 to 1 Kg/Cm2 in 01 Kg/Cm2 Increments) ■■ Gauge Diameter 2-11/16" ■■ Caution: Not for Use on Fuel Injected Vehicles

A U T O

Cat. No.

UPC No.

3386

082171033865

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

EFI Pressure Tester (Multiport Fuel Injection)

3.66 lb

S P E C I A L T Y

EFI Pressure Tester (Multiport Fuel Injection)

■■ Tests Fuel Pump Pressure on AM, Chrysler, Ford, Honda, GM and Mazda Vehicles ■■ Tester can also be used on Most Foreign Vehicles not Equipped With Bosch CIS ■■ Gauge - 3-3/4" Diameter, 145 PSI ■■ Kit Comes in Blow Mold Case

1171

E N G I N E

T O O L S

8 Pc. Sensor & Sending Socket Set

■■ Designed for the Removal and Installation of Oxygen Sensors, Oil Pressure Sending Units, and Vacuum Switches

Cat. No.

UPC No.

41720

082171417207

Packaging

Description

Product Weight

Shelf Pack Qty.

Boxed

8 Pc. Sensor & Sending Socket Set

5.68 lb

Cat. No.

Description

Cat. No.

3919D

1/2" Drive 1-13/16" (29mm) Oil Sender Socket

3923D

Description

3/8" Drive 1-1/16" Deep Oil Pressure Sending Socket

3920D

3/8" Drive 7/8" Slotted Socket for PVS, TVS, and O2 Socket

3924D

1/2" Drive 7/8" (22mm) Oxygen Sensor Socket

3921D

1/2" Drive 1-1/16" Thermal Sensor Socket

3925D

3/8" Drive 7/8" (22mm) Low Profile Offset Oxygen Sensor Socket

3922D

3/8" Drive 7/8" (22mm) Oxygen Sensor Socket

1-13/16 (29mm) 1/2" Drive Oil Sender Socket

■■ 1-3/16" (29mm) 1/2" Drive Oil Sender Socket ■■ Fits 1-3/16" Oil Pressure Sending Units Found on Late-80's and Mid-90's GM Vehicles ■■ (90mm Long) Cat. No.

UPC No.

3919D

082171391903

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

1/2" Drive 1-13/16" (29mm) Oil Sender Socket

0.20 lb

7/8" Slotted Socket for PVS, TVS, and O2 Socket

A U T O

S P E C I A L T Y

■■ Removes and Installs Vacuum Switches with a 7/8" Hex ■■ Also Fits Some Oxygen Sensors (90mm Long)

1172

Cat. No.

UPC No.

3920D

082171392009

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

3/8" Drive 7/8" Slotted Socket for PVS, TVS, and O2 Socket

0.20 lb

1/2" Drive 1-1/16" Thermal Sensor Socket

■■ Remove and Install 1973-1977 GM Thermal Sensor Switch ■■ Also Fits Some Oil Pressure Sending Units (85mm Long)

Cat. No.

UPC No.

3921D

082171392108

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

1/2" Drive 1-1/16" Thermal Sensor Socket

0.20 lb

E N G I N E

T O O L S

7/8" (22mm) 3/8" Drive Oxygen Sensor Socket

■■ Removes and Installs Oxygen Sensors in Most Domestic and Some Imported Vehicles ■■ Slotted Socket Allows for Wire Clearance ■■ 80mm Long

Cat. No.

UPC No.

3922D

082171392207

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

3/8" Drive 7/8" (22mm) Oxygen Sensor Socket

0.20 lb

1-1/16" 3/8" Drive Deep Oil Pressure Sending Socket

■■ Deep Well Allows for Up to 2-5/8" Clearance (74mm Long) ■■ Works on Most 1991 and Newer GM Vehicles Using Oil Pressure Gauge: 4 Cylinder & 3.1 Liter V6 ■■ 1987 and Newer Chrysler Vehicles With Light and Gauge Oil Pressure Switches Cat. No.

UPC No.

3923D

082171392306

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

3/8" Drive 1-1/16" Deep Oil Pressure Sending Socket

0.20 lb

7/8" (22mm) Oxygen Sensor Socket

■■ Offset End Has Double Hex 1/2" Drive for Access (50mm Long)

UPC No.

3924D

082171392405

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

1/2" Drive 7/8" (22mm) Oxygen Sensor Socket

0.20 lb

Cat. No.

7/8" (22mm) Low Profile Offset Oxygen Sensor Socket ■■ Removes and Installs Oxygen Sensors in Most Domestic and Some Imported Vehicles ■■ 30mm Long

3925D

UPC No.

082171392504

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

3/8" Drive 7/8" (22mm) Low Profile Offset Oxygen Sensor Socket

0.20 lb

Cat. No.

UPC No.

3926D

082171392603

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

1-1/16 3/8"DR Short version socket

0.20 lb

S P E C I A L T Y

1-1/16" 3/8" Drive Short Access Socket

■■ For Access to Some Chrysler Vehicles (54mm Long)

A U T O

Cat. No.

1173

E N G I N E

T O O L S

GM Carburetor Adjusting Tool

■■ For Adjusting Idle/Mixture Screws on GM and Chrysler Carburetors ■■ Heavy-Duty Flexible Shaft for Easy Access ■■ Tool is Zinc Plated to Resist Rust ■■ Note: Be Sure Fluted End of Filter Matches Wrench ■■ Four Adapters Conveniently Store in the Comfortable Handle ■■ Adapters: Double “D” for GM, '79 and Newer; 4.5mm Hex for '78 and '79 GM; 1/4 “Hex for Pre-'78 GM; 3/32” Hex for '78 and Newer Chrysler, 1.7L-2.2L Engines Cat. No.

UPC No.

2776D

082171027765

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

GM Carburetor Adjusting Tool

0.15 lb

15 Pc. Ratcheting Serpentine Belt Tool Set

A U T O

S P E C I A L T Y

■■ Patented Tool Combines the Innovation of a GearWrench® Ratcheting Wrench with the Requirements of the Serpentine Belt Removal Tool to Provide the Professional with the Best Possible Combination ■■ Includes Drive Tools: Long Bar, Special GearWrench® Ratcheting Wrench, and 3/8", 1/2" and 3/4" Adapters ■■ Includes 6 Point Sockets: 13mm, 14mm, 15mm, 16mm, 17mm, 18mm and 19mm ■■ Includes Crowsfoot: 13mm, 14mm and 15mm

1174

Cat. No.

UPC No.

3680D

082171036804

Packaging

Description

Product Weight

Shelf Pack Qty.

Boxed

15 Pc. Ratcheting Serpentine Belt Tool Set

3.70 lb

Serpentine Belt Tool

■■ Tool is Used to Release Tension on Serpentine Belt Self-Adjusting Idler Pulley ■■ Just Push or Pull to Release Tension ■■ Crow Foot Wrenches Provide Maximum Coverage and Access ■■ Includes Drive Tools: Long Bar and Short Bar ■■ Includes 12 Point Sockets: 13mm, 15mm, 16mm, 18mm and 19mm ■■ Includes Crowsfoot: 13mm, 14mm and 15mm Cat. No.

UPC No.

3414D

082171034145

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Serpentine Belt Tool

3.01 lb

Serpentine Belt Stretch Tool

■■ Finger that Rocks Belt in Place instead of Twisting, Preventing Belt Damage ■■ Hardened Steel Pulley Pivot for Long Life ■■ Anodized Aluminum Body for Corrosion Resistance

Cat. No.

UPC No.

3681D

082171036811

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Serpentine Belt Stretch Tool

0.12 lb

E N G I N E

T O O L S

Serpentine Belt Grabber Tool

■■ Ergonomic Spring-Loaded Handle Remotely Activates the Belt Grabber for Belt Routing ■■ Grabber Fingers Easily Control the Serpentine Belt During Installation / Removal ■■ Works Faster and Easier than Standard Belt Hook Tools ■■ Corrosion Resistant Steel to Promote Long Life Cat. No.

UPC No.

3684D

082171036842

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Serpentine Belt Grabber Tool

0.78 lb

Fan Clutch Service Set

■■ Covers Most Vehicles With Bolt on Pulleys and Also Newer Chrysler Engines With Press on Pulleys Requiring Special Pins to Hold Housing ■■ Features the Patented Universal Pulley Holder

Cat. No.

UPC No.

41580D

082171414572

Cat. No.

Packaging

Description

Product Weight

Shelf Pack Qty.

Boxed

Fan Clutch Service Set

14.12 lb

Description

Cat. No.

Description

40mm Fan Nut Wrench

3901D

Pulley Holder Pin Set Small (8mm)

36mm Fan Nut Wrench

3473

Fan Clutch Wrench - Diesel

3902D

Pulley Holder Pin Set large ( 10mm, 18mm)

50mm Fan Nut Wrench

3900

Universal Pulley Holder

3422

Cat. No.

Description

22mm Fan Nut Wrench

Pulley Holder / Fan Clutch Tool Kit

Cat. No.

UPC No.

3472

082171034725

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Pulley Holder / Fan Clutch Tool Kit

5.10 lb

Description

Cat. No.

Description

3422

40mm Fan Nut Wrench

3901D

Pulley Holder Pin Set Small (8mm)

3900

Universal Pulley Holder

A U T O

Cat. No.

■■ Universal Puller Holder Eliminates the Need for Various Size Holding Wrenches ■■ Used to Remove and Replace Thermostatic Fan Assemblies ■■ Applications Include: Ford Trucks W/2.8-L, 2.9-L, 3.0-L, 4.0-L, 4.9-L, and 5.0-L Engines; Dodge Trucks W/3.9-L, 5.2-L, 5.9-L, 8.0-L V10 Engines; GM Trucks W/4.3-L, 5.0-L and 5.7-L Engines

36mm Fan Nut Wrench

S P E C I A L T Y

Universal Pulley Holder

■■ Unique Time Saving Tool is Designed to Trap and Hold Bolt-On Pulleys By the Mounting Bolts on Most Applications ■■ When Used in Conjunction With Fan Clutch Wrenches it is Especially Useful in Removing and Replacing Thermostatic Fan Assemblies while Eliminating the Need for Various Size Holding Wrenches ■■ Applications for Use in Fan Clutch Removal Include: Ford Trucks W/2.8-L, 2.9-L, 3.0-L, 4.0-L, 4.9-L, and 5.0-L Engines ■■ Dodge Trucks W/3.9-L, 5.2-L, 5.9-L, 8.0-L and V10 Engines ■■ GM Trucks W/4.3-L, 5.0-L and 5.7-L Engines ■■ Jeeps W/5.2-L Engines Cat. No.

UPC No.

3900

082171390005

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Universal Pulley Holder

1.50 lb

1175

E N G I N E

T O O L S

Ford Fan Clutch Wrench, 4.9 L

■■ Wrench Removes Thermostatic Fan Assembly on 1993 and Newer 4.9-L Ford Engines ■■ Opening is 40mm (1.575") Cat. No.

UPC No.

3422

082171034220

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

40mm Fan Nut Wrench

0.26 lb

Fan Clutch Wrench - Diesel

A U T O

S P E C I A L T Y

■■ Use in Conjunction With the Universal Pulley Holder (3900) to Remove and Replace the Thermostatic Fan Assembly on Ford 6.9-L, 7.3-L, and 7.3-L Diesel Engines ■■ Use With 1/2" Drive Tools and a Torque Wrench ■■ Refer to Factory Service Manual for Torque Specifications and Thread Direction ■■ Wrench Opening is 48mm (1.889")

1176

Cat. No.

UPC No.

3473

082171034732

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Fan Clutch Wrench - Diesel

1.53 lb

2 Pc. Fan Clutch Pulley Holder Set - Ford Powerstroke 6.0 Liter

■■ Designed for Fan Clutch Removal on 2003 and Newer Ford 6.0-L Powerstroke Engines ■■ Unique Fan Clutch Wrench Grips and Securely Holds the Pulley Housing ■■ Fan Clutch Holding Tool to Loosen and Remove Oval or Round Hole Holding Nut Cat. No.

UPC No.

3950

082171395055

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

2 Pc. Fan Clutch Pulley Holder Set - Ford Powerstroke 6.0 Liter

11.24 lb

Honda Acura Crankshaft Holding Tool

■■ Holds Crankshaft in Place Allowing for Removal of Hard-To-Loosen Crankshaft Damper Bolts ■■ Proper Angle Ensures Easy Access to Crankshaft Damper Bolts ■■ Fits Most Honda & Acura 4-Cylinder Applications From 1990 and Up ■■ Easy to Use One Man Operation Tool Speeds Up Repair ■■ Works With 1/2" Square Drive Cat. No.

UPC No.

3970D

082171397004

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Honda Acura Crankshaft Holding Tool

1.2950 lb

E N G I N E

T O O L S

Pulley Puller and Installer Set

■■ Remove Pressed-On Alternator and Power Steering Pulleys on GM, Ford, Chrysler Engines ■■ Threaded End Installs GM Alternator and Power Steering Pulleys, Including Quad 4 ■■ Reverse the Jaws to Pull the Alternator Internal Bearing ■■ Will Not Work on 3.3-L and 3.5-L Chrysler Engines ■■ Includes Blow Mold Case Cat. No.

UPC No.

2897D

082171028977

Cat. No.

Description

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Pulley Puller and Installer Set

2.25 lb

Cat. No.

289780 Replacement part: Puller Body

Description

Cat. No.

Description

289784 Replacement part: Bearing and Washer

289788 Replacement part: Screw Installer for GM 3.1 289789 Replacement part: Screw Installer for Ford 4.6

289781 Replacement part: Jaw & Sleeve Assembly

289785 Replacement part: Puller Pin for Quad 4

289782 Replacement part: Jackscrew

289786 Replacement part: Screw Installer for Quad 4 289790 Replacement part: Screw Installer for Others

289783 Replacement part: Button

289787 Replacement part: Puller Pin for GM 3.1

Power Steering Pump Puller Set

■■ Removes and Installs Power Steering Pump Pulleys Off Most Domestic Vehicles

UPC No.

41560D

082171041563

Packaging

Product Weight

Shelf Pack Qty.

Boxed

4.23 lb

Cat. No.

Description

Cat. No.

Description

Cat. No.

Description

3893D

Transmission Oil Cooler Line Disconnect Tool

41561D

Bushing and Screw Set A

41562D

Bushing and Screw Set B

Cat. No.

A U T O

General Purpose Bushing Set

Cat. No.

UPC No.

41780D

082171417801

Cat. No.

Description

Packaging

Description

Product Weight

Shelf Pack Qty.

Boxed

Gen Purp Bushing Set

4.04 lb

Cat. No.

Description

Cat. No.

Description

Bushing Adapter (1-1/16"- 1-3/16")

Bushing Adapter (11/16"-13/16")

Bushing Adapter (7/16"-1/2")

Bushing Adapter (1-3/16"- 1-5/16")

Bushing Adapter (13/16"-15/16")

Bushing Adapter (7/8"-1")

Bushing Adapter (1/2"-5/8")

Bushing Adapter (15/16"- 1-1/16")

Bushing Adapter (9/16"-11/16")

Bushing Adapter (1-1/4"- 1-3/8")

Bushing Adapter (15/32"-17/32")

Driver #1

Bushing Adapter (1-1/8"- 1-1/4")

Bushing Adapter (3/8"-7/16")

Driver #2

Bushing Adapter (1"-1-1/8")

Bushing Adapter (5/8"-11/16")

Driver #3

Bushing Adapter (3/4"-7/8")

Bushing Adapter (5/8"-3/4")

Driver Nut #1 and #2

S P E C I A L T Y

1177

E N G I N E

T O O L S

9 Pc. Bushing Remover and Inserter Set

UPC No.

31430

082171314308

Cat. No.

Packaging

Description

Product Weight

Shelf Pack Qty.

Boxed

9 Pc. Bushing Remover and Inserter Set

4.90 lb

Description

Cat. No.

Bushing Adapter (1-1/2 to 1-5/8")

Description

Cat. No.

Bushing Adapter (1-5/16 to 1-7/16")

Description

Bushing Adapter (1-9/32 to 1-3/4")

Bushing Adapter (1-11/32 to 1-1/2")

Bushing Adapter (1-7/16 to 1-9/16")

Driver #1

Bushing Adapter (1-3/4")

Bushing Adapter (1-9/16 to 1-11/16")

Driver Nut

Seal Puller

■■ Use Tool to Remove Oil and Grease Seals on Automobiles and Light Trucks ■■ Puller Has 2 Tip Sizes for Most Applications ■■ To Use, Insert Tip Behind Seal and Use Leverage to Remove ■■ Caution: Do Not Use As a Striking Tool ■■ For Intended Use Only Cat. No.

UPC No.

3245

082171032455

S P E C I A L T Y A U T O

Description

Product Weight

Shelf Pack Qty.

Carded

Seal Puller

0.55 lb

Master Bolt Grip Set

UPC No.

41600

082171041600

Cat. No.

1178

Packaging

Product Weight

Shelf Pack Qty.

Boxed

7.16 lb

Description

Cat. No.

Description

Cat. No.

Description

41605

Center Screws for Puller

41601

3 Way Yoke for Bolt Grip Set

41603

Bolt Sets (Black Metric)

41602

4 Pc. Puller Tip Set

41604D

Bolt Sets (Zinc SAE)

Harmonic Balancer Installer

■■ Installs Drive Pulleys on Harmonic Balancers ■■ Complete Range of Adapters ■■ Comes With Thrust Bearing for Ease of Use Cat. No.

UPC No.

36790D

082171367908

Cat. No.

Description

Packaging

Description

Product Weight

Shelf Pack Qty.

Boxed

Harmonic Balancer Installer

3.34 lb

Cat. No.

Description

Cat. No.

Description

367971

Adapter 14mm x 1.5

367976

Adapter 7/16 x 20

367982

10mm X 1.5 Adapter for 36790 Kit

367972

Adapter 16mm x 2.0

367977

Adapter 9/16 x 18

367983

12mm X 1.75 Adapter for 36790 Kit

367973

Adapter 1/2 x 20

367978

Adapter 12mm x 1.5

367984

14mm X 2.0 Adapter for 36790 Kit

367974

Adapter 3/4 x 16

367980

Center Screw

367985

16mm X 1.5 Adapter for 36790 Kit

367975

Adapter 5/8 x 18

367981

Bushing and Washer Kit

E N G I N E

T O O L S

Harmonic Balancer Puller

■■ Puller Removes Balancers, Pulleys, and Gears with Tapped Holes ■■ Floating Swivel Prevents Damage to the Shaft End ■■ Four Slots in the Yoke Allow for 2- or 3-Hole Applications ■■ Tool Bolts to Balancer with Center Screw on the End of the Crankshaft ■■ Tighten while Tapping on the Screw Head to Remove Balancer ■■ Puller includes 3/8-24 UNF, 5/16-18 UNC, 3/8-16 UNC and 10mm x 1.5 Screws for most American and Imported Cars Cat. No.

UPC No.

Packaging

Description

Product Weight

Shelf Pack Qty.

2286D

082171022869

Carded

Harmonic Balancer Puller

2.25 lb

228675

082171337420

Bagged

Replacement Part: Yoke and Screw Swivel

1.35 lb

228677

082171337444

Bagged

Replacement Part: Screw Assortment

1.00 lb

Piston Ring Compressor Set

■■ Set Includes Pliers and 6 Bands, 1119 Through 1124 ■■ Install Pistons From 2-7/8 to 4-3/8" (73 to 111mm) ■■ Pliers Can Be Used Parallel or Perpendicular to the Cylinder Block ■■ Fine-Tooth Ratcheting Lock Allows You to Compress Bands in Small Increments ■■ Set Works By Placing a Band Around the Piston, Covering the Rings and Hooking Pliers Into the Band and Squeezing ■■ With the Band Tightly Around the Piston, Insert Piston Into Cylinder and Tap Lightly With Hammer Handle to Install Cat. No.

UPC No.

850DD

082171008504

Packaging

Description

Product Weight

Shelf Pack Qty.

Boxed

Piston Ring Compressor Set

2.18 lb

Description

Cat. No.

Description

1119D

Piston Ring Compressor Band (2-7/8" to 3-1/8")

1123D

Piston Ring Compressor Band (3-7/8" to 4-1/8")

1120D

Piston Ring Compressor Band (3-1/8" to 3-3/8")

1124D

Piston Ring Compressor Band (4-1/8" to 4-3/8")

1121D

Piston Ring Compressor Band (3-3/8" to 3-5/8")

1125D

Piston Ring Compressor Band (4-3/8" to 4-5/8")

1122D

Piston Ring Compressor Band (3-5/8" to 3-7/8")

UPC No.

1114D

082171011146

Packaging

Product Weight

Shelf Pack Qty.

Carded

0.80 lb

S P E C I A L T Y

Cat. No.

A U T O

Piston Ring Compressor Pliers

■■ Use these Pliers to Install Pistons from 2-5/8 to 5-7/8" (67 to 149mm) in Diameter ■■ Self-Locking Ratchet Allows you to Compress Rings in Small Increments ■■ Pliers can be used Parallel or Perpendicular to the Cylinder Block on Most Bands

Cat. No.

1179

E N G I N E

T O O L S

Piston Ring Compressor Bands

■■ Use These Bands With 1114 Pliers to Compress Piston Rings From 2-7/8 to 4-5/8" in Diameter ■■ Band Width: 1-1/2" Packaging

Description

Product Weight

Shelf Pack Qty.

082171011191

Bagged

Piston Ring Compressor Band (2-7/8" to 3-1/8")

0.20 lb

1120D

082171011207

Bagged

Piston Ring Compressor Band (3-1/8" to 3-3/8")

0.22 lb

1121D

082171011214

Bagged

Piston Ring Compressor Band (3-3/8" to 3-5/8")

0.24 lb

Cat. No.

UPC No.

1119D

1122D

082171011221

Bagged

Piston Ring Compressor Band (3-5/8" to 3-7/8")

0.24 lb

1123D

082171011238

Bagged

Piston Ring Compressor Band (3-7/8" to 4-1/8")

0.26 lb

1124D

082171011245

Bagged

Piston Ring Compressor Band (4-1/8" to 4-3/8")

0.26 lb

1125D

082171011252

Bagged

Piston Ring Compressor Band (4-3/8" to 4-5/8")

0.32 lb

Piston Ring Compressor

■■ Use Compressor to Install Pistons 2-1/8 to 5" (57 to 127mm) in Diameter ■■ Dependable Friction-type Brake Holds Rings in Compressor ■■ Tool is Beaded Along Lower Edge to Prevent Compressor from Entering the Cylinder Cat. No.

UPC No.

1720D

082171017209

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Piston Ring Compressor, 2-1/8" to 5" (57 to 127mm)

0.45 lb

A U T O

S P E C I A L T Y

Piston Ring Compressor

1180

■■ Use Compressor to Install Pistons 3-1/2 to 6-1/2" (89 to 164mm) in Diameter ■■ Positive Lock Action Provides Positive Compression and Fingertip Release ■■ Heavy Spring Steel Compresses the Stiffest Rings Evenly ■■ Tool is Beaded Along Lower Edge to Prevent Compressor From Entering the Cylinder Cat. No.

UPC No.

1723D

082171017230

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Piston Ring Compressor, 3-1/2" to 6-1/2" (89 to 164mm); Trucks and Tractors

0.80 lb

Diesel Ring Compressor

■■ Use to Install Pistons 3-1/2 to 7" (89 to 177mm) in Diameter on Trucks and Tractors ■■ This 6-1/2" High Positive Lock Compressor Has 4 Tension Bands and Compresses Diesel Upper and Lower Rings ■■ Bands are Made of Spring Steel and Beaded Along Lower Edge to Prevent Compressor From Entering the Cylinder Cat. No.

UPC No.

1724

082171017247

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Diesel Ring Compressor

1.60 lb

E N G I N E

T O O L S

Heavy Duty Piston Ring Compressor

■■ Use Compressor to Install Pistons 2-1/8 to 5" (54 to 127mm) in Diameter ■■ Positive Lock Action Provides Positive Compression and Fingertip Release ■■ to Compress Piston Ring Into Grooves, Slip the Tool Over the Piston and Tighten With L-Shaped Wrench ■■ Insert Piston Into Cylinder and Tap With a Hammer to Install ■■ Enlarged Crimped Edge Prevents Compressor From Entering the Cylinder Cat. No.

UPC No.

2284D

082171022845

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Heavy Duty Piston Ring Compressor, 2-1/8 to 5" (54 to 127mm)

0.65 lb

Piston Ring Groove Cleaner

■■ Effectively Removes Carbon From Ring Grooves on Pistons 2 to 5" (51 to 127mm) ■■ Two 5-Bladed Cutters Cover All Major Piston Ring Grooves in SAE and Metric Sizes ■■ Cutters Rotate to any Selected Size, Locking in Place with Hold-Down Nut ■■ Included Cutter #1: 1/16", 5/64", 3/32", 1/8", 3/16" ■■ Included Cutter #2: 1.5mm, 2.5mm, 3mm, 4mm, 5mm Cat. No.

UPC No.

Packaging

Description

Product Weight

Shelf Pack Qty.

1722D

082171017223

Carded

Piston Ring Groove Cleaner

0.18 lb

172271

082171337055

Carded

Replacement Cutter Blade Kit

0.08 lb

Engine Cylinder Ridge Reamer

Cat. No.

UPC No.

Packaging

Description

Product Weight

Shelf Pack Qty.

2389D

082171023897

Carded

Engine Cylinder Ridge Reamer

2.90 lb

238978

082171337574

Carded

Replacement Cutter Blade

0.08 lb

082171028335

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Engine Cylinder Hone

0.90 lb

S P E C I A L T Y

UPC No.

2833D

A U T O

Engine Cylinder Hone

■■ Hone and Remove Glaze From Engine Cylinders From 2" to 7" (51 to 177mm) in Diameter ■■ Adjust Spring Tension for Positive Cutting Action and Set Diameter With Spread Limiter ■■ Hone Includes Medium Grit Stones - Grit No 240 Cat. No.

■■ Reamer Removes Ridges from Top of Engine Cylinders with Bore Diameters 3 to 5" (77 to 127mm) ■■ Tungsten Carbide Cutters and Fine-Thread Feed-Up Ensure Smooth Cutting Action ■■ Unique Design lets you Change from One Cylinder to Another without Readjusting

1181

E N G I N E

T O O L S

4" Replacement Stones

■■ Stones are for 2833D Engine Cylinder Hone

Cat. No.

UPC No.

2834D

082171028342

2835D

082171028359

2836DD

082171028366

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

4" Replacement Stones (Coarse Grit) - No. 100

0.30 lb

Carded

4" Replacement Stones (Medium Grit) - No. 240

0.25 lb

Carded

4" Replacement Stones (Fine Grit) - No. 400

0.25 lb

3" Replacement Stones (Medium Grit)

Cat. No.

UPC No.

3157

082171031571

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

3" Replacement Stones (Medium Grit) - No. 240

0 lb

Engine Cylinder Flex-Hones

■■ Hone Engine Cylinders 3-1/4 to 4-1/8" (83 to 105mm) in Diameter to Produce a Plateaued Finish for Fast Ring Seating and Better Oil Retention for Longer Engine Life ■■ Hone Life is in Excess of 1000 Cylinders ■■ Requires No Setup ■■ Use Variable-Speed 3/8" Electric Hand Drill and Move the Flex-Hone® Up and Down in the Cylinder Until Desired Results are Obtained UPC No.

Packaging

Description

Product Weight

Shelf Pack Qty.

2486

082171024863

Carded

Engine Cylinder Flex-Hones (3-1/2", 89mm); Min Working Diameter (3-1/4", 83mm); 120 Grit

0.75 lb

2487D

082171024870

Carded

Engine Cylinder Flex-Hones (3-3/4", 95mm); Min Working Diameter (3-1/2", 89mm); 120 Grit

0.75 lb

2488D

082171024887

Carded

Engine Cylinder Flex-Hones (4-1/8", 105mm); Min Working Diameter (3-3/4", 95mm); 120 Grit

0.90 lb

Heavy Duty Engine Cylinder Flex-Hones

■■ Heavy-Duty Hone Engine Cylinders, 2-3/4 to 4-1/2" (70 to 114mm) in Diameter, Deliver the Same Plateaued Finish as the Standard-Duty, but are Longer Lasting

A U T O

S P E C I A L T Y

Cat. No.

1182

Packaging

Description

Product Weight

Shelf Pack Qty.

082171024894

Carded

Heavy Duty Engine Cylinder Flex-Hones (3", 76mm); Min Working Diameter (2-3/4", 70mm); 120 Grit

0.75 lb

082171024900

Carded

Heavy Duty Engine Cylinder Flex-Hones (3-1/4", 82mm); Min Working Diameter (3", 76mm); 120 Grit

1 lb

2491

082171024917

Carded

Heavy Duty Engine Cylinder Flex-Hones (3-1/2", 89mm); Min Working Diameter (3-1/4", 83mm); 120 Grit

0.90 lb

2492

082171024924

Carded

Heavy Duty Engine Cylinder Flex-Hones (4", 101mm); Min Working Diameter (3-1/2", 89mm); 120 Grit

1.25 lb

2493DD

082171024931

Carded

Heavy Duty Engine Cylinder Flex-Hones (4-1/2", 114mm); Min Working Diameter (4", 101mm); 120 Grit

1.30 lb

Cat. No.

UPC No.

2489D 2490D

E N G I N E

T O O L S

Valve Grinder

■■ Hand Grind Small and Large Flat-Head Unslotted Valves ■■ Textured Handle and Thin Wall Suction Cups Make Grinding Easy ■■ To Use, Place Grinding Compound on Valve Face and Put in Seat ■■ Put Suction Cup on Valve Head and Turn Handle Between Hands to Grind ■■ There are 2 Sizes Per Tool Cat. No.

UPC No.

Packaging

Description

Product Weight

Shelf Pack Qty.

501D

082171005015

Carded

Small Valve Grinder (5/8", 13/16" Diameter)

0.10 lb

505D

082171005053

Carded

Standard Valve Grinder (1-1/8", 1-3/8" Diameter)

0.15 lb

Valve Spring Compressor

■■ Compress Valve Springs on Overhead Valve and L-head Engines on Cars, Trucks and Tractors ■■ Tool has a 9-3/4" Throat Depth and Jaw Openings 2-3/4 to 7-3/4" fits larger engine sizes ■■ Jaws and Plunger Bar are easily Adjusted ■■ Plunger Bar Seats on Both Flat- and Cup-Shaped Valve Heads ■■ Offset and Straight Jaws are Included Cat. No.

UPC No.

380

082171003806

Packaging

Description

Product Weight

Shelf Pack Qty.

Boxed

Valve Spring Compressor

7.80 lb

Small Engine Valve Spring Compressor

UPC No.

379D

082171003790

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Small Engine Valve Spring Compressor

1.40 lb

S P E C I A L T Y

Valve Spring Compressor

■■ Remove and Replace Valve Springs in GM 8-cylinder Engines ■■ Heavy-duty Tool Replaces Weak or Broken Valve Springs and Guide Seals with Cylinder Head on the Engine ■■ Compressor is Used by Removing Rocker and Fastening Tool to Stud with Nut ■■ Pull on the Handle to Compress Spring ■■ Use with 901DD or 2992D Air Hold Fittings to Keep Valve Closed ■■ Length: 12-1/2" ■■ Caution: Vehicle must be Placed in Park/Neutral before Applying Air Pressure, otherwise Vehicle may move. Keep hands clear of Fan, Belts and Pulleys since slight Crankshaft Rotation will Occur Cat. No.

UPC No.

912DD

082171009129

A U T O

Cat. No.

■■ Long and Slender, Will Reach Into Small Recesses Where Valve Springs and Retaining Washers are Located ■■ Arms are Hinged at One End So They are Practically Parallel at the Other End at All Points ■■ Jaws are Adjustable in Width and Have Edges So Thin That They Can Be Forced Under and Over Ends of Valve Spring to Compress It for Removal ■■ Operating Screw Makes Ratchets and Locks Unnecessary ■■ Will Work on All Briggs and Stratton Engines ■■ Maximum Opening 2-3/8"

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Valve Spring Compressor

1.16 lb

1183

E N G I N E

T O O L S

Valve Spring Compressor

■■ Compressor Services Overhead Valve Engines ■■ Handle on the Outside of the Tool Makes it Easy to Use. It has a Throat Depth of 7-1/2" and Jaw Openings 2-3/4 to 5-7/8" ■■ Compressor fits most Passenger Cars and Light Trucks and will also work on Small L-head Engines with Manifolds Removed ■■ 38370D Offset Jaws are Included Cat. No.

UPC No.

Packaging

Description

Product Weight

Shelf Pack Qty.

383D

082171003837

Carded

Valve Spring Compressor

4.65 lb

38370D

082171383700

Bagged

Replacement Part: Jaw Set (Newer Style)

0.53 lb

Valve Spring Compressor

■■ Compress Valves on Small Overhead Valve or L-head Engines ■■ Tool has a Throat Depth of 6-1/4" and Jaw Openings of 3 to 5-3/8" ■■ Designed for Liight-weight Valve Springs ■■ Compressor Works on L-heads with Manifolds Removed and many Industrial Engines Packaging

Description

Product Weight

Shelf Pack Qty.

082171003851

Carded

Valve Spring Compressor

2.55 lb

082171385704

Bagged

Replacement Part: Jaw Set (New Style)

0.65 lb

Cat. No.

UPC No.

385D 38570D

A U T O

S P E C I A L T Y

Deluxe Universal Overhead Valve Spring Compressor

1184

■■ Compressor Easily Removes Valve Springs on Most Cars and Light Trucks ■■ Tool Can Be Used With the Cylinder Head on or Off the Engine ■■ Features a Removable Handle Allowing Use With 5/8" Socket or Wrench in Confined Areas and an Extra-Long Leg for More Applications ■■ For Best Results, Use With 901DD or 2992D Air Hold Fittings to Pressurize the Cylinder and Keep the Valves in Place During Removal of the Spring and Keepers ■■ Caution: Vehicle Must Be Placed in Park/Neutral Before Applying Air Pressure, Otherwise Vehicle May Move ■■ Keep Hands Clear of Fan, Belts and Pulleys Since Slight Crankshaft Rotation Will Occur Cat. No.

UPC No.

Packaging

Description

3271DD 327175D 327176

Product Weight

Shelf Pack Qty.

082171032714

Carded

082171318344

Bagged

Deluxe Universal Overhead Valve Spring Compressor

0.95 lb

Replacement Long Leg, Length 3-15/32"

0.28 lb

082171318351

Bagged

Replacement Short Leg, Length 3-5/32"

0.25 lb

Universal Overhead Valve Spring Compressor

■■ Remove Valve Springs on Most Cars With Overhead Valves Without Removing the Cylinder Head ■■ Offset Jaws Grip the Valve Spring in Parallel Compression ■■ Tool Maintains Constant Length As Spring is Compressed ■■ Use With 901DD or 2992D Air Hold Fittings to Keep Valve in Place ■■ Caution: Vehicle Must Be Placed in Park/Neutral Before Applying Air Pressure, Otherwise Vehicle May Move ■■ Keep Hands Clear of Fan, Belts and Pulleys Since Slight Crankshaft Rotation Will Occur Cat. No.

UPC No.

2078D

082171020780

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Universal Overhead Valve Spring Compressor

0.95 lb

E N G I N E

T O O L S

Exhaust and Talpipe Cutter

■■ Cut Pipes 3/4" to 3" (19 to 76mm) in Diameter ■■ Fifteen Blades Effectively Cut Pipe so only 1/4 Turn is needed for a Complete Cut ■■ Patented, Serviceable Tool Works in Hard-to-Reach Areas ■■ Will not cut Double-Wall Pipes ■■ Keep Well Oiled ■■ Not for use on Stainless Steel Cat. No.

UPC No.

Packaging

Description

Product Weight

Shelf Pack Qty.

2031DD

082171020315

Carded

Exhaust and Tailpipe Cutter

1.16 lb

203182D

082171231766

Boxed

Replacement Cutting Chain

0.32 lb

Exhaust and Tailpipe Expander (1-13/16" to 2-1/2") ■■ Flare, Shape and Expand Tailpipes to Ensure a Tight Fit and Prevent Exhaust Leaks ■■ Turn Handle to Adjust the Expander to the Diameter of the Pipe ■■ Pipe Size 1-1/2" to 2-1/2" (38mm to 63.5mm) Cat. No.

UPC No.

2071D

082171020711

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Exhaust and Tailpipe Expander (1-13/16" to 2-1/2")

2.65 lb

Exhaust Pipe Expander (1-13/16" to 2-1/2")

Cat. No.

UPC No.

3442

082171034428

■■ Used to Remove Clamp Grooves and Round Out Crushed or Bent Exhaust Pipes to Ensure a Tight Fit, Eliminating Exhaust Leaks ■■ Hex End Allows for the Use of a Combination Wrench to Remove Clamp Grooves or Small Imperfections or an Impact Wrench to Expand Pipes ■■ Imperfections are Forced Outward Rather Than Forward, Eliminating Possible Damage to Component Parts ■■ No Holding Fixture is Necessary ■■ Pipe Size 1-13/16" to 2-1/2" (46 to 63.5mm) Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Exhaust Pipe Expander (1-13/16" to 2-1/2")

2.90 lb

1 A U T O

4 Pc. Scraper Set

Cat. No.

UPC No.

84080

099575840807

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Scraper Set

2.11 lb

Cat. No.

Description

Cat. No.

Description

84081

1/4" Wide Scraper

84082

1/2" Wide Scraper

84083

1" Wide Scraper Long

84084

1" Wide Scraper Short

S P E C I A L T Y

■■ Includes 4 Flat Scrapers ■■ Innovative Dual Material handle for Comfort and Performance ■■ Oil and Solvent Resistant

1185

E N G I N E

T O O L S

2 Pc. Scraper Set

■■ Innovative Dual Material handle for Comfort and Performance ■■ Oil and Solvent Resistant Cat. No.

UPC No.

84070

099575840708

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Scraper Set

1.15 lb

Cat. No.

Description

Cat. No.

Description

84071

1" Wide Reverse Scraper

84072

1" Wide Offset Scraper

1" Crimped Wire-End Brush

■■ Brush Removes Dirt, Rust and Paint From Metal and Other Surfaces ■■ Designed for General-Purpose Cleaning with 0.020" Industrial Crimped Wire ■■ Use in Electrical Drills, Pneumatic Tools or Flexible Shaft Equipment ■■ Face Diameter: 1" ■■ Shank Diameter: 1/4" ■■ Maximum Safe Free Speed: 20,000 Rpm Cat. No.

UPC No.

2313D

082171023132

Packaging

Product Weight

Carded

0.65 lb

Cat. No.

UPC No.

2312DD

082171023125

Packaging

Product Weight

Carded

0.45 lb

2-1/2" Wire Cup Brush

■■ Brush Removes Light Scale, Rust and Paint From Surfaces ■■ Designed for Light-Duty Use With 0.014" High Carbon Steel Wire ■■ Use in Electric Drills or Flexible Shaft Equipment Cat. No.

UPC No.

2314D

082171023149

A U T O

S P E C I A L T Y

1" Knot-type Wire-End Brush

■■ Brush Removes Rust, Carbon and Paint From Metal and Other Surfaces ■■ Designed for Heavy-Duty Use and Consists of Industrial Tempered Straight Twisted Wire 0.020" ■■ Use with Electric Drills, Pneumatic Tools or Flexible Shaft Equipment ■■ Face Diameter: 1" ■■ Shank Diameter: 1/4" ■■ Maximum Safe Free Speed: 20,000 RPM

Packaging

Product Weight

Carded

0.86 lb

Curved Handle Wire Scratch Brush

■■ Clean Carbon, Dirt and Paint from Metal and other Surfaces with this Wooden-Handle Brush ■■ Overall Length: Approximately 14" ■■ Bristle Area: 3 X 19 Rows, 1-1/8" Trim and 6" Long

1186

Cat. No.

UPC No.

2310D

082171023101

Packaging

Product Weight

Carded

0.35 lb

E N G I N E

T O O L S

Shoe Handle Wire Scratch Brush

■■ Use This Hardwood-Handle Brush to Clean Dirt, Carbon and Rust From Metal and Other Surfaces ■■ Bristles are Densely Packed Over 5-1/4" ■■ Overall Length: Approximately 10" ■■ Bristle Area: 4 X 16 Rows and 1-1/8" Trim Cat. No.

UPC No.

2311D

082171023118

Packaging

Product Weight

Carded

0.35 lb

Parts Cleaning Brush

■■ Brush Removes Grease and Dirt From Automotive Parts ■■ Strong Handle with Durable Polypropylene Bristles will Hold Up Under Repeated use in Cleaning Solvents Cat. No.

UPC No.

242

082171002427

Packaging

Product Weight

Shelf Pack Qty.

Carded

0.20 lb

Stainless Steel Brush

■■ Brush Has Hand-Tied Stainless Steel Tufts for Cleaning Corrosion from Parts without Scratching ■■ Brush Size: 3/8" X 1-3/8" ■■ Handle Length: 7" UPC No.

2309D

082171023095

Packaging

Product Weight

Shelf Pack Qty.

Carded

0.05 lb

Cat. No.

A U T O S P E C I A L T Y

1187

B A T T E R Y ,

I G N I T I O N ,

E L E C T R I C A L

5/16" Side Terminal Battery Wrench

Cat. No.

UPC No.

3367

082171033674

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Side Terminal Battery Wrench

0.33 lb

Battery Terminal Puller

■■ Use Puller to Remove the Battery Terminal Clamp Without Damaging the Battery Post ■■ Puller Will Even Work on Corroded Spring-Type Clamps ■■ To Use, Loosen the Clamp Bolt, Place Jaws Under Each Side of the Battery Cable Clamp and Tighten the Center Screw Until the Clamp is Free

UPC No.

202D

082171002021

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Battery Terminal Puller

0.50 lb

Cat. No.

Battery Terminal Spreader and Cleaner

A U T O

S P E C I A L T Y

■■ Clean and Spread Battery Cable Terminals With This Plier-Type Tool ■■ Sharp Teeth Effectively Clean Corrosion From the Clamp ■■ Squeeze the Handle to Spread the Clamp

1188

Cat. No.

UPC No.

204D

082171002045

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Battery Terminal Spreader and Cleaner

0.60 lb

Battery Nut Pliers

■■ Loosen and Tighten Nuts on Battery Terminal Clamps ■■ Offset Handles for Working in Cramped Areas ■■ Serrated Jaws Provide Firm Grip

Cat. No.

UPC No.

203D

082171002038

Packaging

Product Weight

Shelf Pack Qty.

Carded

0.45 lb

B A T T E R Y ,

I G N I T I O N ,

E L E C T R I C A L

Three-Way Battery Tool

■■ Sharp Steel Blades on This Tool Remove Corrosion and Put a Correct Angle on Terminal Clamps and Posts ■■ Use the 6-Blade, Tapered Reamer to Quickly Clean Terminal Clamps ■■ Post Cleaners are Marked Positive and Negative, and are Sized to Accurately Fit Terminal Posts and Cut the Correct Angle ■■ Proper Cleaning of Terminals and Posts Ensures Perfect Contact

Cat. No.

UPC No.

2173DD

082171021732

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Three-Way Battery Tool

0.15 lb

Metal Battery Brush

■■ Durable Metal Brush to Remove Corrosion and Dirt from Battery Terminals and Cable Clamps ■■ Rugged Metal Case has a Long Life

Cat. No.

UPC No.

206D

082171002069

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Battery Brush

0.25 lb

Plastic Battery Brush

■■ Removes Corrosion and Dirt from Battery Terminals and Cable Clamps ■■ High-impact, Plastic Case will not Corrode or Soften Brush in Cleaning Solutions

201D

082171002014

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Battery Brush

0.16 lb

Battery Carrying Strap, Top and Side Mount

■■ Carry Top-Terminal and Side-Terminal Batteries with this Strong, Plastic Strap ■■ Ends are Marked and Sized to Accurately Fit Positive and Negative Terminals ■■ Not Harmed by Battery Acid ■■ Can Also Be Used as a Charging Adapter on Side-Mounted Terminal Batteries ■■ Length: 14" Cat. No.

UPC No.

2279DD

082171022791

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Battery Carrying Strap

0.46 lb

S P E C I A L T Y

UPC No.

A U T O

Cat. No.

1189

B A T T E R Y ,

I G N I T I O N ,

E L E C T R I C A L

Battery Carrying Strap, Top Mount

■■ Carry Top-Terminal Batteries with this Strong, Plastic Strap ■■ Ends are Marked and Sized to Accurately Fit Positive and Negative Terminals ■■ Not Harmed by Battery Acid ■■ Length: 14"

Cat. No.

UPC No.

205D

082171002052

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Battery Carrying Strap

0.25 lb

Low-Voltage Circuit Tester

■■ Test for Voltage in 6 and 12V Systems by Grounding the Clip and Touching the Probe to the Point being Tested ■■ Tester Bulb will Light if Power is Present ■■ Replacement Bulb Part: 12675 (GE 1449 Bulb)

Cat. No.

UPC No.

129D

082171001291

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Low-Voltage Circuit Tester

0.43 lb

Description

Product Weight

Shelf Pack Qty.

A U T O

S P E C I A L T Y

High-Low Voltage Tester

1190

■■ Test for Voltage in 6 and 12V Systems for Voltage and Spark Plugs for Spark by Grounding the Clip and Touching the Probe to the Point being Tested ■■ Tester Bulb will Light if Power is Present ■■ To Use as a Spark Tester, Screw the Probe to the Opposite End of the Handle

Cat. No.

UPC No.

Packaging

126D

082171001260

Carded

High-Low Voltage Tester

0.20 lb

12678

082171126789

Bagged

Replacement Part: Neon Bulb

0.01 lb

12675

082171126758

Bagged

Replacement part: GE 1449 Bulb

0.01 lb

Low-Voltage Circuit Tester

■■ Circuit Tester for 6 and 12V Electrical Systems is Ideal for the Home Mechanic ■■ Quickly Checks Headlight, Taillight and Turn Signal Circuits, Faulty Sockets, Connections, Fuses and Broken Wires ■■ Comes in a Tough, Durable Shock-Resistant Case ■■ Includes 12V Bulb and 36" Cable ■■ Replacement Bulb: 1893

Cat. No.

UPC No.

2646D

082171026461

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Low-Voltage Circuit Tester

0.15 lb

B A T T E R Y ,

I G N I T I O N ,

E L E C T R I C A L

Circuit Continuity Tester

■■ Includes 36” Cable. One Aar Battery Required (Not Included). Uses Bulb #112 Screw-In Design ■■ Designed for the Home Mechanic, This Tool Safely Tests Circuits With Power Off ■■ Ideal for Testing Fuses, Grounds, Shorts, Contacts, Diodes and Open Circuits Cat. No.

UPC No.

2647D

082171026478

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Circuit Continuity Tester

1.12 lb

Circuit and Spark Plug Tester

■■ Includes 36” Cable. Uses Bulb #1893 ■■ Checks 6 and 12V Circuits for Voltage and Checks Spark Plug for Spark ■■ Place Probe in End With Regular Bulb to Check Low Voltage ■■ Checks Headlights, Taillights, Turn Signals and Other Circuits ■■ Tests for Faulty Sockets, Connections and Broken Wires ■■ Place Probe in End With Neon Bulb to Check for Spark Voltage ■■ Tester Comes in a Shock-Proof Case Cat. No.

UPC No.

2649D

082171026492

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Circuit and Spark Plug Tester

0.15 lb

Product Weight

Shelf Pack Qty.

6, 12, 24 Volt Circuit Tester 16

UPC No.

Packaging

Description

3984

082171039843

Carded

6, 12, 24 Volt Circuit Tester

0.59 lb

398401D

082171398414

Bagged

Replacement Bulb (GE 1889)

0.08 lb

S P E C I A L T Y

HEI Ignition Tester

■■ Accurately Check for Spark in Ignition Systems Without Removing Spark Plug From Engine ■■ Testers Verify That Energy is Sufficient for Spark Plug to Fire ■■ Attach Spark Plug Wire to Tester End ■■ Clamp Tester to Engine As Ground ■■ Crank Engine and Check for Spark

Cat. No.

UPC No.

2756D

082171027567

A U T O

Cat. No.

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

HEI Ignition Tester

0.15 lb

1191

B A T T E R Y ,

I G N I T I O N ,

E L E C T R I C A L

Standard Ignition Tester

UPC No.

2757D

082171027574

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Standard Ignition Tester

0.15 lb

Short Circuit Detector

■■ Locates Short Circuits in 6 and 12V Systems Right Through Upholstery, Body Panels and Metal Door Posts ■■ Connect Tester Across Burned Out Fuse ■■ Move Meter Along Wire Routing ■■ Meter Needle Will Oscillate Until Short is Found

Cat. No.

UPC No.

2524D

082171025242

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Short Circuit Detector

0.35 lb

Cat. No.

UPC No.

2423D

082171024238

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Current Indicator

0.10 lb

Distributor Clamp Wrench

A U T O

S P E C I A L T Y

Current Indicator

■■ Measures Alternator and Starter Dc Current in 6, 12 and 24V Systems ■■ Indicates Direction of Current Flow Without Breaking Into Lines ■■ Starter Current Scale: 600-0-600 ■■ Alternator Current Scale: 75-0-75 ■■ Place Meter on Wire ■■ Crank Engine to Check Starter Current ■■ Run Engine to Check Alternator Current

1192

Cat. No.

UPC No.

104

082171001048

10473

082171104732

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Distributor Clamp Wrench

0.60 lb

Bagged

Replacement Part: Coupler for Distributor Clamp Wrench

0.05 lb

B A T T E R Y ,

I G N I T I O N ,

E L E C T R I C A L

Ignition File

■■ Use Tool to File Ignition Points and Other Small Objects ■■ The Thin Blade Has a Fine Grid on Both Sides and is Ideal for Removing Carbon From Points

Cat. No.

UPC No.

2153D

082171021534

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Ignition File

0.03 lb

Electrical Wire Stripper and Crimper

■■ All-Purpose Tool Includes Pliers Type Nose, Crimper, Wire Cutter, Stripper and Bolt Cutter ■■ Crimper Works on Insulated and Non-insulated Terminals. Noninsulated Auto 7 & 8mm, and Electrical 22-20 to 22-10. Insulated Electrical 22-20 to 12-10. ■■ Bolt Cutters for Bolt Sizes 4-40, 5-40, 6-32, 8-32, 10-32 and 10-24 Cat. No.

UPC No.

2162D

082171021626

Packaging

Product Weight

Shelf Pack Qty.

Carded

0.50 lb

Spark Plug Terminal Pliers

■■ Safely Remove Spark Plug Cables and Prevent Cable Damage

Cat. No.

UPC No.

135D

082171001352

Packaging

Product Weight

Shelf Pack Qty.

Carded

0.53 lb

UPC No.

730D

082171007309

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

14mm and 18mm Spark Plug Open. Thread Chaser

0.30 lb

S P E C I A L T Y

Cat. No.

A U T O

14mm and 18mm Spark Plug Open Thread Chaser ■■ Clean and Restore Spark Plug Threads with a 13/16" Socket ■■ Rubber Ring Eliminates Slipping ■■ Tool Services Most Cars

1193

B A T T E R Y ,

I G N I T I O N ,

E L E C T R I C A L

14mm Cylinder Head Rethreader Kit

■■ Repair Damaged 14mm Spark Plug Threads By Opening Hole With a Reamer/Tap and Screwing Insert Onto the Spark Plug ■■ Use Spark Plug Socket to Install Spark Plug and Insert ■■ Remove Plug and Check That Insert is Properly Seated ■■ Set Includes 1 Each of 4 Inserts: 3/8, 7/16, 1/2 and 3/4" Reach and Thread Locking Compound ■■ Tap is Designed for Aluminum Heads Only

Cat. No.

UPC No.

2125D

082171021251

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

14mm Cylinder Head Rethreader Kit

0.30 lb

14mm Spark Plug Thread Inserts

■■ Use to Replace Damaged 14mm Spark Plug Threads on Aluminum Head Engines Only ■■ Use With 2123D Reamer/Tap to Repair Holes ■■ Thread Locking Compound and 1 Pair of Inserts are Included ■■ Inserts are Designed for Use in Holes Reworked With Reamer/ Tap Listed

Cat. No.

UPC No.

Packaging

Description

Product Weight

Shelf Pack Qty.

2126D

082171021268

Carded

3/8" Spark Plug Thread Inserts

0.05 lb

2127D

082171021275

Carded

7/16" Spark Plug Thread Inserts

0.05 lb

2128D

082171021282

Carded

1/2" Spark Plug Thread Inserts

0.05 lb

2129DD

082171021299

Carded

3/4" Spark Plug Thread Inserts

0.05 lb

Cat. No.

UPC No.

3379D

082171033797

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

14mm Spark Plug Rethreader

0.10 lb

A U T O

S P E C I A L T Y

14mm Spark Plug Rethreader

■■ Tool Features Extra-Long Neck for Access to Recessed Spark Plug Cavities ■■ Groove and O-Ring Holds Tool in Socket ■■ Use With 3/8" Square Drive Tool or a 5/8" Socket

14mm Spark Plug Insert Reamer/Tap

■■ Opens Damaged Spark Plug Hole Threads Prior to Using Spark Plug Thread Inserts ■■ Use Inserts 2126D Through 2129DD to Repair 14mm Spark Plug Holes on Aluminum Heads Only

1194

Cat. No.

UPC No.

2123D

082171021237

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

14mm Spark Plug Insert Reamer/Tap

0.20 lb

B A T T E R Y ,

I G N I T I O N ,

E L E C T R I C A L

3 Pc. Magnetic Spark Plug Set

■■ Contains Long Reach Magnetic Swivel Spark Plug Sockets ■■ Covers Sizes 5/8",13/16", and 9/16"

Cat. No.

UPC No.

41730D

082171417306

Packaging

Description

Product Weight

Shelf Pack Qty.

Boxed

3 Pc. Magnetic Spark Plug Set

1.67 lb

Cat. No.

Description

Cat. No.

Description

3931D

9/16" Spark Plug Socket - Magnetic 2.5" Length

3930D

13/16" Swivel Spark Plug Socket - Magnetic 6" Length

3928D

5/8" Swivel Spark Socket - Magnetic 6" Length

3 Pc. Magnetic Swivel Spark Plug Set

■■ Long Reach 5/8" Magnetic Swivel Spark Plug Socket Set ■■ Lengths of 4", 6", and 11"

UPC No.

41740D

082171417405

Packaging

Description

Product Weight

Shelf Pack Qty.

Boxed

3 Pc. Magnetic Swivel Spark Plug Set

1.96 lb

Cat. No.

Description

Cat. No.

Description

3927D

5/8" Swivel Spark Plug Socket - Magnetic Plug 4" Length

3929D

5/8" Swivel Spark Plug Socket - Magnetic 11" Length

3928D

5/8" Swivel Spark Socket - Magnetic 6" Length

Cat. No.

UPC No.

Packaging

Fastener Size

Overall Length

Product Weight

Shelf Pack Qty.

3931D

082171393105

Carded

9/16 in

2-1/2 in

0.10 lb

3938D

082171039386

Carded

9/16 in

6 in

0.30 lb

3927D

082171392702

Carded

5/8 in

4 in

0.20 lb

3928D

082171392801

Carded

5/8 in

6 in

0.30 lb

3929D

082171392900

Carded

5/8 in

11 in

0.44 lb

3930D

082171393006

Carded

13/16 in

6 in

0.30 lb

S P E C I A L T Y

Magnetic Swivel Spark Plug Sockets

■■ Magnetic Swivel Design for Easy Installation or Removal of Spark Plugs

A U T O

Cat. No.

1195

B O D Y

T O O L S

7 Pc. Hook & Pick Set

Cat. No.

UPC No.

84000D

099575840005

Cat. No.

Description

Packaging

Product Weight

Shelf Pack Qty.

Blow Mold Tray

1.56 lb

Cat. No.

Description

84001D

5" Cotter Pin Puller

84005

3-1/8" 90° Mini Hook

84002D

4" Hose Pick Puller

84006

3-1/8" Straight Mini Hook

84003D

4-1/2" Awl

84007

3-1/8" Mini Offset Hook

84004D

3-1/8" Mini Full Hook

Cat. No.

UPC No.

84040

099575840401

Cat. No.

Description

Cat. No.

Description

84004D

3-1/8" Mini Full Hook

84006

3-1/8" Straight Mini Hook

84005

3-1/8" 90° Mini Hook

84007

3-1/8" Mini Offset Hook

1196

Packaging

Product Weight

Shelf Pack Qty.

Retail Packaging

0.44 lb

4" Hose Pick Puller

A U T O

S P E C I A L T Y

4 Pc. Mini Hook & Pick Set

Cat. No.

UPC No.

84002D

099575840029

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

4" Hose Pick Puller

0.22 lb

B O D Y

T O O L S

4-1/2" Awl Cat. No.

UPC No.

84003D

099575840036

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

4-1/2" Awl

0.20 lb

5" Cotter Pin Puller

Cat. No.

UPC No.

84001D

099575840012

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

5" Cotter Pin Puller

0.26 lb

3-1/8" Mini Full Hook

Cat. No.

UPC No.

84004D

099575840043

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

3-1/8" Mini Full Hook

0.16 lb

3-1/8" 90° Mini Hook

UPC No.

84005

099575840050

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

3-1/8" 90° Mini Hook

0.07 lb

Cat. No.

UPC No.

84006

099575840067

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

3-1/8" Straight Mini Hook

0.07 lb

S P E C I A L T Y

3-1/8" Straight Mini Hook

A U T O

Cat. No.

1197

B O D Y

T O O L S

3-1/8" Mini Offset Hook

Cat. No.

UPC No.

84007

099575840074

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

3-1/8" Mini Offset Hook

0.16 lb

4 Pc. Door Panel Remover Set

Cat. No.

UPC No.

84060

099575840609

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Set includes tools to help remove door panels with minimal damage

2.34 lb

Cat. No.

Description

Cat. No.

Description

84051

4" V-Notch Puller

84053

4" Scraper

84052

4" Square Notch Puller

84054D

4" Curved Blade V-Notch Puller

A U T O

S P E C I A L T Y

4 Pc. Door Pad and Panel Removal Set

1198

Cat. No.

UPC No.

84050

099575840500

Packaging

Product Weight

Shelf Pack Qty.

Carded

2.10 lb

Cat. No.

Description

Cat. No.

Description

84051

4" V-Notch Puller

84053

4" Scraper

84052

4" Square Notch Puller

84054D

4" Curved Blade V-Notch Puller

B O D Y

T O O L S

10" Door Panel Remover U Shape

Cat. No.

UPC No.

84062

099575840623

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

10" Door Panel Remover - U

0.42 lb

4" Curved Blade V-Notch Puller

Cat. No.

UPC No.

84054D

099575840548

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

4" Curved Blade V-Notch Puller

0.43 lb

4" Square Notch Puller

UPC No.

84052

099575840524

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

4" Square Notch Puller

0.53 lb

Cat. No.

UPC No.

84051

099575840517

S P E C I A L T Y

4" V-Notch Puller

A U T O

Cat. No.

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

4" V-Notch Puller

0.20 lb

1199

B O D Y

T O O L S

3 Pc. Body Clip Set

■■ 30° and 80° Offset Push Pin Pliers ■■ Panel Clip Pliers with "V" Design for Removal of Standard Clips without Center Pins

Cat. No.

UPC No.

41850

082171418501

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

3pc Body Clip Set

1 lb

Cat. No.

Description

Cat. No.

Description

3705

Panel Clip Pliers

3888D

Push Pin Pliers - 80°

3729

Push Pin Removal Pliers - 30°

2 Pc. Push Pin Pliers Set

A U T O

S P E C I A L T Y

■■ 30° and 80° Offset Push Pin Pliers

1200

Cat. No.

UPC No.

Packaging

Product Weight

Shelf Pack Qty.

41840D

082171418402

Carded

0.90 lb

Cat. No.

Description

Cat. No.

Description

3729

Push Pin Removal Pliers - 30°

3888D

Push Pin Pliers - 80°

Push Pin Removal Pliers - 30° Offset

■■ Specially Designed for Removal of Push Pins With Center Locking Pin ■■ Quickly Removes Plastic Anchors That Have Center Pins Without Damage to Pins or Anchor ■■ Tool Lifts the Center Pin and Pulls Anchor in One Simple Step ■■ Anchors Common on Honda, Toyota, GM, Ford, Chrysler and Many Other Late Model Vehicles ■■ Fits Into Pin Slots and Under the Center Pin ■■ Double Cushion Grip Handle ■■ Tapered End for Easy Access ■■ 30° Offset Cat. No.

UPC No.

3729

082171037290

Packaging

Product Weight

Shelf Pack Qty.

Carded

0.45 lb

B O D Y

T O O L S

Push Pin Pliers - 80°

UPC No.

3888D

082171388804

Packaging

Product Weight

Shelf Pack Qty.

Carded

0.45 lb

Packaging

Product Weight

Shelf Pack Qty.

Carded

0.57 lb

Panel Clip Pliers

■■ Features a Unique Two-Step Tip That Provides Better Support Under the Clip Head Than Conventional Panel Clip Pliers ■■ Added Support Provided by the Two-Step Design Allows Removal of Panel Clips Without Damaging the Clip

Cat. No.

UPC No.

3705

082171037054

2 Pc. Hog Ring Pliers Set

A U T O

■■ Used for Upholstery Work on Most All Domestic and Foreign Cars ■■ 45 Degree Hog Ring Plier ■■ Straight Hog Ring Plier ■■ For Installation of "Hog Ring" Fasteners ■■ Specially Made to Grip and Mold Hog Rings for Closure ■■ Spring Loaded to Hold Hog Ring in Jaws During Use ■■ Cushion Grip Handle

UPC No.

3702D

082171037023

Packaging

Product Weight

Shelf Pack Qty.

Carded

1.50 lb

Cat. No.

Description

Cat. No.

Description

3703D

Hog Ring Pliers Straight

3704D

Hog Ring Pliers 45 Degree

S P E C I A L T Y

Cat. No.

1201

B O D Y

T O O L S

Hog Ring Pliers Straight

■■ Specially Made to Grip and Mold Hog Rings for Closure ■■ Spring Loaded to Hold Hog Ring in Jaws During Use ■■ Cushion Grip Handle

Cat. No.

UPC No.

3703D

082171037030

Packaging

Product Weight

Shelf Pack Qty.

Carded

0.75 lb

Hog Ring Pliers 45 Degree

■■ Used for Upholstery Work on Most All Domestic and Foreign Cars ■■ 45 Degree for Added Access ■■ Specially Made to Grip and Mold Hog Rings for Closure ■■ Spring Loaded to Hold Hog Ring in Jaws During Use ■■ Cushion Grip Handle Cat. No.

UPC No.

3704D

082171037047

Packaging

Product Weight

Shelf Pack Qty.

Carded

0.75 lb

Trim Pad Removing Tool

A U T O

S P E C I A L T Y

■■ Tool Reaches Behind Trim Panel on GM and Other Cars ■■ Grips Plastic Fastener and Removes Trim Without Damage

1202

Cat. No.

UPC No.

2822D

082171028229

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Trim Pad Removing Tool

0.22 lb

Door Handle and Window Lift Remover

■■ Compresses the Door Handle Spring Clip Far Enough so that the Handle can be Removed while the Spring Clip Remains on the Handle ■■ Use Tool's Reverse End to Disengage Clip Holding Door Upholstery Panels ■■ Fits GM, Ford and Other Cars Using Type of Clip Shown

Cat. No.

UPC No.

431D

082171004315

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Door Handle and Window Lift Remover

0.32 lb

B O D Y

T O O L S

Window Moulding Remover

■■ Removes Clips and Spreads Rubber Gasket on Chrysler Windows ■■ Rounded Point Spreads Zipper-Type Gaskets

Cat. No.

UPC No.

2037DD

082171020377

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Window Molding Remover

0.18 lb

Window Moulding Remover

■■ Removes Window Molding Clips on GM, Ford Vehicles ■■ Place Jaw Flat Against Glass ■■ Locate Clips and Roll Them Out With Tip, Keeping Jaw Flat to Glass

Cat. No.

UPC No.

2038D

082171020384

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Window Molding Remover

0.21 lb

Body Dent Remover 16

■■ Pulls Dented Sheet Metal Back Into Place ■■ To Use, Drill a Hole in the Deepest Part of the Dent, Insert the Hook or Self-Threading Screw Tip and Tap Lightly With the 2 Lb Slide Hammer to Remove the Dent ■■ 16.5" Long Shaft (Including Handle) Enables High Pulling Force ■■ Slide Hammer Shaft Has a 1/2-20 UNC Thread ■■ Handle Length: 4.75" UPC No.

Packaging

Description

Product Weight

Shelf Pack Qty.

2290D

082171022906

Carded

Body Dent Remover

3.58 lb

229070

82171337451

Bagged

Replacement Part: Hook and Screw Package

0.10 lb

229076

82171337437

Bagged

Replacement Part: Nose Nut

0.06 lb

S P E C I A L T Y

Deluxe 6" Dent Puller

■■ Puller Easily Pops Dented Hoods, Doors and Fenders Into Place ■■ 6" Diameter Suction Disc With Steel Handle and Steel Support Plates Enables Strong Pull ■■ Works on Nearly Every Dent Where the Sheet Metal Has Not Been Creased ■■ Lift Edge to Release Suction ■■ Puller Also Functions as a Glass Holder

Cat. No.

UPC No.

2761D

082171027611

A U T O

Cat. No.

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Deluxe 6" Dent Puller

0.52 lb

1203

B O D Y

T O O L S

Radio Removal & Antenna Wrench Set

Cat. No.

UPC No.

41680D

082171416804

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Radio Removal & Antenna Wrench Set

2.06 lb

Mini Scraper

■■ Use for Light Scraping on Wood, Metal and Glass ■■ Small Size Allows for Scraping in Confined Areas ■■ Scraper Includes Plastic Sleeve Handle for Comfort ■■ Comes in Convenient Standard Pack of 30 in Countertop Merchandiser ■■ Orders Must Be Placed in Multiples of 30 Cat. No.

UPC No.

3390

082171033902

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Mini Scraper

0.10 lb

A U T O

S P E C I A L T Y

All-Purpose Scraper and Sticker Remover

1204

■■ Remove Inspection Stickers, Dealer Price Labels and Paint From Glass ■■ Tool Locks Into 3 Operating Positions to Reach Hard-To-Get-At Slanting Windshields and Uses Single-Edge Razor Blades ■■ Cutting Edge Folds Into the Handle for Safe Storage

Cat. No.

UPC No.

2106

082171021060

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

All-Purpose Scraper and Sticker Remover

0.29 lb

Long Reach Scraper

■■ 7" Long Reach Scraper is Ideal for Use Where Added Extension is Needed, Such As Deep Recessed Dash Boards in Mini-Vans ■■ Contains Two Replacement Blades, Including One Plastic Blade Which Will Not Harm Coated Windows ■■ Replacement Plastic Blade Available

Cat. No.

UPC No.

Packaging

Description

Product Weight

3528D 352870

Shelf Pack Qty.

082171035289

Carded

Extended Long Reach Scraper

0.53 lb

82171990151

Carded

Replacement Plastic Blade

0.02 lb

B R A K E

A N D

W H E E L

16 Pc. Brake Service Set

Cat. No.

UPC No.

Packaging

Description

Product Weight

Shelf Pack Qty.

41520

082171041525

Boxed

16 Pc. Brake Service Set

5.98 lb

Cat. No.

Description

Cat. No.

Description

287D

Drum Brake Adjusting Tool

80421

3/8" Drive Hex Bit Socket, 3/8"

298D

Brake Spring Pliers

80428D

3/8" Drive Hex Bit Socket, 7mm

2774D

Universal Brake Shoe Retaining Spring Tool

80429

3/8" Drive Hex Bit Socket, 8mm

3163D

Disc Brake Piston Tool

80431

3/8" Drive Hex Bit Socket, 10mm

3355D

GM-Ford Disc Brake Piston Tool

80451

3/8" Drive TORX® Press-Fit Bit Socket, T-40

3525D

Heavy Duty Brake Pad Separator

80452

3/8" Drive TORX® Press-Fit Bit Socket, T-45

3962

Brake Lining Thickness

80454

3/8" Drive TORX® Press-Fit Bit Socket, T-50

80419

3/8" Drive Hex Bit Socket, 1/4"

11 Pc. Rear Brake Caliper Set

■■ Designed for Vehicles With Brake Pistons That are Mechanically Tied to the Parking Brake and Require a Turning Action to Push Back ■■ Set Covers Most Domestic and Import Vehicles

A U T O

UPC No.

41540

082171041549

Packaging

Description

Product Weight

Shelf Pack Qty.

Boxed

11 Pc. Rear Brake Caliper Set

5.14 lb

Cat. No.

Description

Cat. No.

Description

41541

Applicator & Pad for Brake Tool

41546D

Adapter 5: 1-3/8", 2 Pin, 3/8" Drive

41542

Adapter O: 2-1/2", 1 Pin

41547

Adapter 6: 1-5/8", 2 Pin(L)

41543

Adapter 2: 2", 3 Pin

41548D

Adapter 7: 1-5/8", 2 Pin(S)

41544

Adapter 3: 2-1/4", 3 Step

41549D

Adapter 8: 1-7/8", 1 Pin

41545

Adapter 4: 1-1/4", 2 Pin

41550D

Adapter P: 2-1/4", 1 Pin

S P E C I A L T Y

Cat. No.

1205

B R A K E

A N D

W H E E L

Brake Spring Pliers

■■ Tool Easily Removes and Installs Shoe Return Springs on Most Drum Brakes ■■ Socket End Removes Spring From Anchor Stud and Notched End Installs Spring on Anchor ■■ Tool is Chrome Plated to Resist Rust and Provides Easy Cleanup

Cat. No.

UPC No.

298D

082171002984

Packaging

Product Weight

Shelf Pack Qty.

Carded

0.90 lb

Bendix Drum Brake Spring Tool

■■ Tool Removes and Installs Return Spring on Bendix Drum Brakes ■■ To Use, Place Socket End Over Spring Anchor and Twist to Remove ■■ Hook Notched End Through Spring and Over the Post, Then Lift to Install Cat. No.

UPC No.

280

082171002809

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Bendix Drum Brake Spring Tool

0.35 lb

A U T O

S P E C I A L T Y

Brake Shoe Retaining Spring Tool

1206

■■ Tool Removes and Installs Retaining Springs 11/16 to 7/8" in Diameter ■■ Special Socket Grips Retaining Washer ■■ Push and Turn to Remove or Install

Cat. No.

UPC No.

285D

082171002854

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Brake Shoe Retaining Spring Tool

0.25 lb

Drum Brake Adjusting Tool

■■ Tool Adjusts Clearance Between Drum Brake and Brake Shoe ■■ Fits Through a Slot in the Backing Plate and Turns the Star Wheel ■■ Ends of Tool are Offset for Hard-To Reach Areas on Small Cars

Cat. No.

UPC No.

295D

082171002953

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Drum Brake Adjusting Tool

0.25 lb

B R A K E

A N D

W H E E L

Drum Brake Adjusting Tool

■■ Tool Adjusts Clearance Between Drum Brake and Brake Shoe ■■ Fits Through a Slot in the Backing Plate and Turns the Star Wheel

Cat. No.

UPC No.

287D

082171002878

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Drum Brake Adjusting Tool

0.25 lb

Universal Brake Shoe Retaining Spring Tool

■■ Double-Ended Tool Removes and Installs Small and Large Car Drum Brake Retaining Springs ■■ Tool Fits Sizes 5/8 to 11/16" and 11/16 to 7/8" Diameter Special Sockets Grip Retaining Washers ■■ Push and Turn to Remove or Install

Cat. No.

UPC No.

2774D

082171027741

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Universal Brake Shoe Retaining Spring Tool

0.30 lb

Disc Brake Piston Tool

■■ Designed to Rotate the Parking-Brake-Activated Piston Back into the Caliper Cylinder When Replacing Worn Pads on Vehicles Equipped With 4-Wheel Disc Brakes ■■ Tool Will Function on Most Domestic and Import Vehicles ■■ Caution: Do Not Use With Power Tools

Cat. No.

UPC No.

3163D

082171031632

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Disc Brake Piston Tool

0.20 lb

GM-Ford Disc Brake Piston Tool

UPC No.

3355D

082171033551

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

GM-Ford Disc Brake Piston Tool

0.20 lb

Disc Brake Pad Spreader

■■ Pushes the Caliper Piston Back on Disc Brakes that do not have the Parking Brake Mechanism as Part of the Disc Brake Caliper ■■ Caution: for Intended Use Only

Cat. No.

UPC No.

3376D

082171033766

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Disc Brake Pad Spreader

0.44 lb

S P E C I A L T Y

Cat. No.

A U T O

■■ Tool Rotates the Piston Back on GM and Ford Vehicles Equipped With Rear Wheel Disc Brakes ■■ Fits GM Vehicles with 2-1/8 and 1-7/8" Pistons and Ford Vehicles 1987 to Current With Rear Disc Brakes ■■ Use in Conjunction With 3/8" Square Drive Tool ■■ Caution: for Intended Use Only

1207

B R A K E

A N D

W H E E L

Heavy Duty Brake Pad Separator

■■ Tool Helps to Move Front Disc Brake Pistons Back Into Position While Installing New Brake Shoes ■■ Works With Most All Disc Brake Systems With Single Piston Caliper ■■ Features Heavy Duty Center Screw and Pressure Plate for Extended Use ■■ Use With a 1/2” Wrench or Socket ■■ Upgraded With a Knob That Allows for Use With Both a 5/16" Socket Wrench or Use By Hand ■■ Heavy Duty Plate to Reduce Bending ■■ Solid Swivel Foot Will Not Collapse or Crush Under Pressure ■■ Not for Use With an Impact Wrench Cat. No.

UPC No.

3525D

082171035258

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Heavy Duty Brake Pad Separator

0.83 lb

One-Man Brake Bleeder

■■ Attach Bleeder to Loosened Bleeder Screw and Pump Brake Pedal Until All Air Bubbles are Removed From the Hose ■■ Two Adapters Fit Most Bleeder Screws and Prevent Leakage While Keeping the Hose in Place

UPC No.

2538D

082171025389

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

One-Man Brake Bleeder

0.80 lb

Description

Product Weight

Shelf Pack Qty.

Cat. No.

S P E C I A L T Y

Vacuum Brake Bleeder

■■ 12 Ft Long Hose for Access Attached to Pulling Pole for Convenient Storage ■■ Automatic Fluid Shut-Off ■■ 4 Gallon Capacity Tank ■■ New Industry Standard 2100 Series Disconnect ■■ Wheels Instead of Feet Mean Greater Mobility When Tank is Full

A U T O

Cat. No.

1208

UPC No.

Packaging

3737D

082171037375

Boxed

Vacuum Brake Bleeder

3.43 lb

3738

082171037382

Boxed

Vacuum Brake Bleeder, Bleeder Only

2.32 lb

3739

082171037399

Boxed

Vacuum Brake Bleeder, Refill Bottle

0.32 lb

B R A K E

A N D

W H E E L

Brake Bleeder Tank

■■ Diaphragm-type Bleeder for Conventional and Anti-Lock Brake Systems Allows for One-Man Operation ■■ Diaphragm keeps Brake Fluid and Air Separated ■■ Custom Adaptors Available for Many Makes and Models ■■ Holds Approximately 4 Gallons ■■ Includes Combination Quick Coupler plus Automatic Fluid ShutOff ■■ Steel Construction ■■ Caution: For use with DOT 2, 3, 4 and 5 Brake Fluids Only, Not for use with any other Brake / Hydraulic Fluid

Cat. No.

UPC No.

3795D

082171037955

Packaging

Description

Product Weight

Shelf Pack Qty.

Boxed

Brake Bleeder Tank

20.6 lb

Superseded by

Key Features

2222 Brake Bleeder Tank

3795 Brake Bleeder Tank

4 gallon capacity, with wheels and hand post for mobility, disconnect changed to industry standard

2901 Brake Bleeder Tank

Uses new industry standard disconnect - all else the same

3353 Brake Bleeder Adapter

3796 Brake Bleeder Adapter

GM Full-sized cars and trucks

2417 Brake Bleeder Adapter

3789 Brake Bleeder Adapter

Ford Full-sized cars and trucks

3297 Brake Bleeder Adapter

3788 Brake Bleeder Adapter

Domestic and Import Applications

3354 Brake Bleeder Adapter

3787 Brake Bleeder Adapter

GM Vans and Dodge Trucks

New Application

3790 Brake Bleeder Adapter

Many Import Applications

New Application

37951 Brake Bleeder Adapter - 100 Series to 2100 series

Converts classic 2222 brake bleeder tank to new 37XX series master cylinder adapters

New Application

37952 Brake Bleeder Adapter - 2100 Series to 100 series

Converts new 3795 brake bleeder tank to classic KD master cylinder adapters

3294 Brake Bleeder Adapter

No Replacement

2216 Brake Bleeder Adapter

No Replacement

A U T O

Brake Bleeder Tank

UPC No.

Packaging

S P E C I A L T Y

■■ Safe, Portable Tank Fills and Pressurizes Standard and Power Brake Systems ■■ Operates from Hand Pump Pressure, Eliminating the need for an Air Compressor ■■ Only a Few Pumps are needed to Build Pressure to 10 to 15 PSI ■■ Tank is Serviceable and Features Quick Disconnect Coupler and Shut-off Valve that is Used as a Source for Brake Fluid when Topping off Master Cylinders with Brake Bleeder Adapter Attached

Cat. No.

Obsolete Part #

Description

Product Weight

Shelf Pack Qty.

2901D

082171029011

Boxed

Brake Bleeder Tank

5.50 lb

222273

82171337147

Boxed

Replacement Part, Pressure Gauge

0.35 lb

222276

82171337161

Bagged

Replacement Part, Quick Disconnect Coupler

0.03 lb

290171

82171291173

Bagged

Replacement Part, O-Ring

0.01 lb

290101

82171291104

Bagged

Replacement Part, Valve

0.15 lb

1209

B R A K E

A N D

W H E E L

Brake Bleeder Adapter, 100 Series to 2100 Series

■■ Converts Classic 2222 and Classic 2901 Brake Bleeder Tank to new 37XX Series Master Cylinder Adapters

Cat. No.

UPC No.

37951

082171379512

Packaging

Description

Product Weight

Shelf Pack Qty.

Boxed

Coupler - Adapts Classic 2222 Brake Bleeder Tank to 3700 Series Master Cylinder Adapters

0.25 lb

Brake Bleeder Adapter, 2100 Series to 100 Series

■■ Converts 3795D and 2901D Brake Bleeder Tank to classic KD Brand Master Cylinder Adapters

Cat. No.

UPC No.

37952

082171379529

Packaging

Description

Product Weight

Shelf Pack Qty.

Boxed

Coupler - Adapts 3795D Brake Bleeder to Classic Master Cylinder Adapters

0.24 lb

Cat. No.

UPC No.

3787

082171037870

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Dual Bleeding Attachment

0.93 lb

Universal Adapter 3.25” Diameter

■■ Adapter Pressurizes Brake Systems on Many Applications Across Many Makes ■■ Use With 3-1/2" Round Reservoirs ■■ Adapter for use with 3795D and 2901D Brake Bleeding Tanks

A U T O

S P E C I A L T Y

Dual Bleeding Attachment

■■ Use for Pressurizing Brake Systems when Bleeding Dual Round Top Reservoirs ■■ Features Quick Disconnect Fittings for Fast Setup ■■ Adapter for Use With 3795D and 2901D Brake Bleeding Tanks

1210

Cat. No.

UPC No.

3788

082171037887

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Brake Bleeder, Universal Adapter 3.25” Diameter

0.97 lb

B R A K E

A N D

W H E E L

Universal Adapter 3.75" X 7.75"

■■ Adapter Pressurizes Brake Systems on Many Applications Across Many Makes ■■ Use with Rectangular Reservoirs Under 3.75" X 7.75" Common on Trucks and Full Sized Vehicles ■■ Adapter for use with 3795D and 2901D Brake Bleeding Tanks

Cat. No.

UPC No.

3789

082171037894

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Brake Bleeder, Universal adapter 3.75” x 7.75”

3.86 lb

Universal Round Adapter 4-1/8"

■■ Adapter Pressurizes Brake Systems on Many Applications Across Many Makes ■■ Use with 4-1/8" Round Reservoirs ■■ Adapter for use with 3795D and 2901D Brake Bleeding Tanks

Cat. No.

UPC No.

3790D

082171037900

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Brake Bleeder, Universal Round adapter 4-1/8”

2.23 lb

GM Bypass Adapter

■■ Adapter Pressurizes Brake Systems on Most GM Applications ■■ For use with 3795D and 2901D Brake Bleeding Tanks ■■ Caution: for Intended Use Only

A U T O

UPC No.

3796

082171037962

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

GM Bypass adapter

1.18 lb

S P E C I A L T Y

Cat. No.

1211

B R A K E

A N D

W H E E L

Tubing Service Set

■■ For Tubing Service ■■ Broad Tubing Application Including Double Flare, Bend, Cut, Ream, and Deburr

Cat. No.

UPC No.

Packaging

Description

Product Weight

Shelf Pack Qty.

41590D

082171041594

Boxed

Tubing Service Set

3.70 lb

Cat. No.

Description

Cat. No.

Description

2107D

Mini Tubing Cutter

41594

7 Pc. Flaring Adapter Kit

2189D

Tubing Bender

41595

Holding Bar

3905D

Deburring Tool

41596

Yoke For Flaring Tool

A U T O

S P E C I A L T Y

Combined Double / Bubble Flaring Tool Kit

1212

■■ Complete Double and Bubble Flaring Tool Assortment ■■ Slots on Yoke Firmly Engage with Bar Assembly ■■ Includes Corresponding Adapters for Forming Double Flares ■■ Forged Alloy Steel and Hardened ■■ Precisely Flares Tubing Up to 0.040" Wall Thickness to SAE/ Metric 45° Flares ■■ Hardened Bar Assembly Clamps 11 Tubing Sizes: 3/16", 1/4", 5/16", 3/8", 7/16", 5/8", 1/2", 47, 6, 8, and 10mm ■■ Additional Set Contents: SAE Bar Assembly, Metric Bar Assembly, Yoke Assembly, Reamer, Cutter, 3/16" Flaring Tool Adapter, 1/4" Flaring Tool Adapter, 5/16" Flaring Tool Adapter, 3/8" Flaring Tool Adapter, 7/16" Flaring Tool Adapter, 1/2" Flaring Tool Adapter, 5/8" Flaring Tool Adapter, 4.7 mm Flaring Tool Adapter, 6mm Flaring Tool Adapter, 8mm Flaring Tool Adapter, 10mm Flaring Tool Adapter, and Cutter

Cat. No.

UPC No.

41880D

082171418808

Cat. No.

Description

Packaging

Description

Product Weight

Shelf Pack Qty.

Boxed

Combined Double / Bubble Flaring Tool Kit

7.35 lb

Cat. No.

Description

3905D

Deburring Tool

41598D

Bubble Flaring Tool Holding Bar

41595

Holding Bar

41599

4 Pc. Bubble Flaring Adapter Kit

41597

Universal Yoke

B R A K E

A N D

W H E E L

Double Flaring Tool Kit

Cat. No.

UPC No.

41860

082171418600

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Double Flaring Tool Kit (replaces 2199 & 3869)

4.05 lb

Cat. No.

Description

Cat. No.

Description

3905D

Deburring Tool

41595

Holding Bar

41594

7 Pc. Flaring Adapter Kit

41597

Universal Yoke

Bubble Flaring Tool Kit 16

A U T O

UPC No.

Packaging

Description

Product Weight

Shelf Pack Qty.

41870

082171418709

Carded

Bubble Flaring Tool Kit (replaces 3482)

4.35 lb

Cat. No.

Description

Cat. No.

Description

3905D

Deburring Tool

41598D

Bubble Flaring Tool Holding Bar

41597

Universal Yoke

41599

4 Pc. Bubble Flaring Adapter Kit

S P E C I A L T Y

Cat. No.

1213

B R A K E

A N D

W H E E L

Mini Tubing Cutter

■■ Cut Thin-Wall Steel, Plastic, Copper and Brass Tubing From 1/8 to 5/8" in Diameter ■■ Two Rollers Provide Burr-Free Cut ■■ Small Size Allows Cutter to Fit Into Tight Areas

Cat. No.

UPC No.

2107D

082171021077

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Mini Tubing Cutter

0.21 lb

Tubing Cutter

■■ Tool Cuts Tubing, Copper, Brass, Aluminum and Thin Wall Conduit ■■ Features an 1/8 to 1-1/8" Capacity and Has a Reamer Blade to Clean Off and Smooth Any Sharp Edges ■■ Both the Cutter Wheels and Reamer are Made of Hardened Alloy Steel

UPC No.

3457

082171034572

Cat. No.

Packaging

Product Weight

Shelf Pack Qty.

Carded

0.70 lb

Tubing Bender

A U T O

S P E C I A L T Y

■■ Bend 3/16, 1/4, 5/16, and 3/8" Diameter Tubing Without Kinking ■■ Place Tubing in Groove and Turn the Handle to Bend ■■ Heavy-Duty Construction Provides Years of Service

1214

Cat. No.

UPC No.

2517D

082171025174

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Tubing Bender

0.60 lb

Tubing Bender

■■ Bend 3/16", 1/4", 5/16" and 3/8" Copper and Steel Tubing ■■ Tool Makes Tight Bends without the Tube Collapsing ■■ Roller Adapters are Included for each Tubing Size ■■ Place Tubing Between the Adapter and Studs and Squeeze the Handles to Bend

Cat. No.

UPC No.

2189D

082171021893

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Tubing Bender

1.17 lb

B R A K E

A N D

W H E E L

Deburring Tool

■■ Deburring Tool for Removing Rough Edges for Better Flaring Tube Fit

Cat. No.

UPC No.

3905D

082171390500

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Deburring Tool

0.15 lb

Brake Cylinder Hone

■■ Tool Hones Drum Brake Wheel Cylinders and Disc Brake Calipers From 3/4 to 2-1/2" (19 to 64mm) in Diameter ■■ Sleeve Makes Insertion in Cylinder Easy and Protects Stones When Not in Use ■■ Use with a Variable-Speed Drill ■■ Use 2004D Stone Set for Disc Brake Honing and 266 for Drum Brake Honing

Cat. No.

UPC No.

265D

082171002656

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Brake Cylinder Hone

0.25 lb

Replacement Stones

■■ Stones Fit Brake Cylinder Hones 265D, 2544 and 267

Cat. No.

UPC No.

Packaging

Description

Product Weight

Shelf Pack Qty.

2004D

082171020049

Carded

3 Replacement Stones for Converting 3-Legged 265D or 2544 Cylinder Hone to Disc Brake Hone; Size 400, 3/4"

0.32 lb

266

082171002663

Carded

3 Replacement Stones for 265D or 2544 Drum Brake Cylinder Hone; Size 320, 1"

0.23 lb

UPC No.

3029

082171030291

302975

82171318313

Packaging

S P E C I A L T Y

Cat. No.

A U T O

Economy Brake and Engine Cylinder Hone Set

■■ Multi-Purpose Set Includes 3 Complete Hones and 1 Set of 2" Stones ■■ Complete Hone for Brake, Master and Wheel Cylinders 3/4 through 2-1/2" Capacity, with 1-1/8" Medium-Grit Stones ■■ Complete Hone for Small Car Brake Wheel Cylinders 1/2 Through 1-3/4" Capacity, with Two 1-1/8" Medium-Grit Stones ■■ Complete Hone for Disc Brake Caliper Honing. 1-1/4" Through 3-1/2" Capacity, with 3/4" Medium-Grit Stones; also Ideal for Lawn and Garden Small-Engine Cylinder Honing when used with Three 2" Medium-Grit Stones (Included) ■■ Replacement Part: 3029-75 Three 2" Cylinder Hone Stones

Description

Product Weight

Shelf Pack Qty.

Carded

Economy Brake and Engine Cylinder Hone Set

0.60 lb

Carded

Replacement Part, Three 2" Cylinder Hone Stones

0.11 lb

1215

B R A K E

A N D

W H E E L

Brake Lining Thickness Gauge

■■ Color Coded Brake Gauge Identifies Thickness Levels for Brake Lining Inspection ■■ Metric - 8, 10, & 12mm (Green), 4, 5, 6mm (Yellow), 2 & 3mm (Red) ■■ SAE - 0.3150 to 0.4720" (Green), 0.1575 to 0.2382" (Yellow), 0.0787 to 0.1181" (Red)

Cat. No.

UPC No.

3962

082171396205

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Brake Lining Thickness

0.58 lb

Disc Brake Lining Wear Gauge

■■ Gauge Measures Brake Lining Remaining on Bonded Pads in Fractions From 1/16" to 5/8" in 1/32" Graduations ■■ Tool Checks Measurement Without Removing Caliper ■■ Tool is Patented

Cat. No.

UPC No.

2116D

082171021169

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Disc Brake Lining Wear Gauge

0.20 lb

A U T O

S P E C I A L T Y

Brake Lining Gauge, Wide Band

1216

■■ Gauge Measures Bonded Brake Lining From 0 to 1/2" in 1/64" Graduations ■■ Place Gauge Over Brake Shoe to Take Reading

Cat. No.

UPC No.

2324D

082171023248

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Brake Lining Gauge

0.35 lb

Tire Tread And Brake Lining Gauge

■■ Measure the Amount of Lining Remaining on Riveted Drum Shoes and Disc Brake Pads ■■ Gauge Measures Tire Tread Depth Up to 9/16" in Graduations of 1/64"

Cat. No.

UPC No.

2326D

082171023262

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Tire Tread and Brake Lining Gauge

0.20 lb

B R A K E

A N D

W H E E L

Brake Resetting Gauge

■■ Used to Set the Proper Clearance Between Brake Lining and Drum Prior to Assembly ■■ Inside Calipers Measure Drum Diameters and Outside Calipers Transfer Measurement to Brake Shoes ■■ Knurled Knob Locks Tool at Measurement ■■ Diameter Range: 6-1/2" to 14-1/4" ■■ Calibrated in 1/32" (1mm) Increments

Cat. No.

UPC No.

3377

082171033773

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Brake Resetting Gauge

1.50 lb

6" Digital Caliper with Large LCD window

3756D

082171037566

Packaging

Product Weight

Shelf Pack Qty.

Boxed

0.76 lb

Cat. No.

Dial Indicator Set with On/Off Stand

UPC No.

3761

082171037610

S P E C I A L T Y

Cat. No.

A U T O

Packaging

Product Weight

Shelf Pack Qty.

Boxed

4.64 lb

1217

B R A K E

A N D

W H E E L

Electronic Digital Rotor Micrometer

Cat. No.

UPC No.

3763

082171037634

Packaging

Product Weight

Shelf Pack Qty.

Boxed

3.72 lb

A U T O

S P E C I A L T Y

Digital Brake Rotor Gauge

1218

Cat. No.

UPC No.

3774D

082171037740

Packaging

Product Weight

Shelf Pack Qty.

Boxed

1.01 lb

Digital Brake Drum Gauge

UPC No.

3777

082171037771

Packaging

Product Weight

Shelf Pack Qty.

Boxed

4.06 lb

B R A K E

A N D

W H E E L

Axle Nut Set

■■ 7 Extra Long 1/2" Drive 6 Point Metric Sockets are Ideal for Heavy-Duty Use in Removing and Installing Axle Nuts Use With a Ratchet, Breaker Bar, Impact Wrench, or Torque Wrench

Cat. No.

UPC No.

41650

082171416507

Packaging

Description

Product Weight

Shelf Pack Qty.

Boxed

Axle Nut Set

12.39 lb

Cat. No.

Description

Cat. No.

Description

3907D

29mm Deep 1/2" Dr. Deep Axle Nut Socket, GM & Ford

3908D

35mm Deep 1/2" Dr. Deep Axle Nut Socket, GM

3161D

30mm Deep 1/2" Dr. Deep Axle Nut Socket, GM

3162D

36mm Deep 1/2" Dr. Deep Axle Nut Socket, GM

3270D

32mm Deep 1/2" Dr. Deep Axle Nut Socket, Honda/Chrysler

3909D

38mm Deep 1/2" Dr. Deep Axle Nut Socket, GM & Ford

3449D

34mm Deep 1/2" Dr. Deep Axle Nut Socket, GM

Axle Nut Sockets

■■ These 7 Extra Long 1/2" Drive 6 Point Metric Sockets are Ideal for Heavy-Duty use in Removing and Installing Axle Nuts ■■ Use with a Ratchet, Breaker Bar, Impact Wrench, or Torque Wrench

Cat. No.

UPC No.

Packaging

Description

Product Weight

Shelf Pack Qty.

3907D

082171390708

Carded

29mm Deep 1/2" Dr. Deep Axle Nut Socket, GM & Ford

0.80 lb

3161D

082171031618

Carded

30mm Deep 1/2" Dr. Deep Axle Nut Socket, GM

1.25 lb

3270D

082171032707

Carded

32mm Deep 1/2" Dr. Deep Axle Nut Socket, Honda/Chrysler

1.45 lb

3449D

082171034497

Carded

34mm Deep 1/2" Dr. Deep Axle Nut Socket, GM

1.55 lb

082171390807

Carded

35mm Deep 1/2" Dr. Deep Axle Nut Socket, GM

1.76 lb

082171031625

Carded

36mm Deep 1/2" Dr. Deep Axle Nut Socket, GM

2.05 lb

3909D

082171390906

Carded

38mm Deep 1/2" Dr. Deep Axle Nut Socket, GM & Ford

2.22 lb

S P E C I A L T Y

4WD Spindle Puller with Internal Threads

■■ Removes Front Spindle to Access Needle Bearing When Lubricating and Aligning Front Wheels ■■ 5/8"-18 Fine Thread Permits Use With Slide Hammer ■■ Fits Spindle Thread Sizes 2"-16, 1-5/8"-16, and 38mm-15 ■■ Applications: Full-Size GM, Ford, Jeep and International Pickups With Dana Front Axles, Plus Ranger and Bronco Ii Cat. No.

UPC No.

3910D

082171391002

A U T O

3908D 3162D

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

4WD Spindle Puller

0.80 lb

1219

B R A K E

A N D

W H E E L

Spindle Nut Set

■■ 6 Chrome Vanadium Steel 1/2" Drive Sockets are for Most 4WD SUV's and Light Truck Axle Locknut Applications ■■ Use With a Torque Wrench, Ratchet, or Breaker Bar

Cat. No.

UPC No.

Packaging

Description

Product Weight

Shelf Pack Qty.

41660D

082171416606

Boxed

Spindle Nut Set

13.48 lb

Cat. No.

Description

Cat. No.

Description

2467

4-Lug 4WD Spindle Nut Socket, 1/2 to 3/4 Ton Dana 44

3910D

4WD Spindle Puller

2770D

6-Lug 4WD Spindle Nut Socket, 3/4 to 1 Ton Dana 44

3911D

Toyota Lock Nut Tool

3195D

4-Lug Socket with Extension 1/2 Ton Dana 80

3937

4-Lug 4WD Spindle Nut Socket 1/2 Ton Dana 50

4-Wheel-Drive Spindle Nut Wrench

■■ Removes Spindle Nuts on 4-Wheel Drive Vehicles ■■ Features Uniquely Designed Lugs for Maximum Strength ■■ Use With 1/2" Square Drive Tool ■■ Will Work on Ford Vehicles With Ratcheting Type Lock Nuts on Front Axle ■■ Caution: Do not use with Power Tools

Cat. No.

UPC No.

2467

082171024672

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

4-Lug 4WD Spindle Nut Socket, 1/2 to 3/4 Ton Dana 44

1.35 lb

2770D

082171027703

Carded

6-Lug 4WD Spindle Nut Socket, 3/4 to 1 Ton Dana 44

1.50 lb

3246D

082171032462

Carded

4-Wheel-Drive Spindle Nut Wrench, Dana Axle or Dana 50IFS

1.80 lb

Cat. No.

UPC No.

3911D

082171391101

A U T O

S P E C I A L T Y

Toyota Lock Nut Tool

1220

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Toyota Lock Nut Tool

0.80 lb

55mm Lock Nut - 1/2 Drive

Cat. No.

UPC No.

3912D

082171391200

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

55mm Lock Nut - 1/2 Drive

0.80 lb

B R A K E

A N D

W H E E L

4-Lug 4WD Spindle Nut Socket 1/2 Ton Dana 50

■■ Remove and Install 4-Slot Front Axle Locknuts on 1981-97 Ford F250- 350, Bronco With Dana Axle, or Dana 50Ifs or Model 60 Monobeam Axle Outer Adjusting Nut; 1982-90 GM Heavy Duty 3/4- and 1-Ton Trucks

Cat. No.

UPC No.

3937

082171393709

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

4-Lug 4WD Spindle Nut Socket 1/2 Ton Dana 50

1.02 lb

Ford Spindle Nut Wrench

■■ Specially Designed Wrench Removes Ford High-Sheer Ratcheting Lock Nut on Popular F250/350 Series Trucks ■■ Special Feature Includes a Centering Snout to Help Locate Special Axle Nut and Uniquely Designed Lugs for Maximum Strength ■■ Use With 1/2" Drive Tool ■■ Applications:1985 and newer Ford F250-350 With Dana 80 Rear Axle, and 10 1/4" Ring Gear, 1987 E350 and newer with Dana 80 Rear Axle and 10 1/4" Ring Gear, 1988 and newer F Super Duty With Dana 80 Rear Axle and 10 1/4" Ring Gear ■■ Caution: Do not use with Power Tools Cat. No.

UPC No.

3195D

082171031953

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

4-Lug Socket with Extension 1/2 Ton Dana 80

2.03 lb

Bearing Race and Seal Set

■■ Install Tapered Bearing Races and Seals Without Damage to the Component or Housing ■■ Includes a Driver Handle Plus 9 Popular Bearing and Seal Drivers Ranging From 1.565" to 3.180"

A U T O

UPC No.

41630D

082171416309

Packaging

Description

Product Weight

Shelf Pack Qty.

Boxed

Bearing Race and Seal Set

4.74 lb

Cat. No.

Description

Cat. No.

Description

41631D

Driver Handle

41636D

2.470" Driver

41632

1.565" Driver

41637

2.555" Driver

41633

1.750" Driver

41638

2.830" Driver

41634

1.961" Driver

41639

2.995" Driver

41635

2.325" Driver

41640

3.180" Driver

S P E C I A L T Y

Cat. No.

1221

B R A K E

A N D

W H E E L

Hand Bearing Packer

■■ Self-Contained Bearing Packer Saves Time and Can Be Used Anywhere ■■ No Air Line or Grease Gun Required ■■ Packs 50 to 60 Bearings Without Refilling ■■ Transparent, Impact Resistant Cup Allows Grease Level Check ■■ Use on All Cage-Type Roller and Ball Bearings Up to 2" Bore

Cat. No.

UPC No.

2775D

082171027758

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Hand Bearing Packer

0.90 lb

Wheel Weight Tool

■■ Tool Installs, Removes, Trims and Tightens All Types of Clip-On Wheel Weights ■■ It Features a Special Plastic-Type Material on the Hammer Head for Safe, Mar-Free Installation of Specially Coated Wheel Weights Used on Alloy Wheels ■■ Tool Has a Plastisol-Dipped Handle for Comfort ■■ Replacement Part: 335804 Plastic Tip ■■ Caution: for Intended Use Only

UPC No.

Packaging

Description

Product Weight

Shelf Pack Qty.

3358

082171033582

Carded

Wheel Weight Tool

1.10 lb

335804

82171335808

Carded

Replacement Plastic Tip

0.23 lb

Cat. No.

8 Pc. SAE/Metric Stud Removal Set

A U T O

S P E C I A L T Y

■■ Complete SAE and Metric Stud Remover Set Offers the Best Professional Extractors Available ■■ Designed and Tested to Reach Studs in Difficult Work Areas

1222

Cat. No.

UPC No.

41760D

082171417603

Packaging

Description

Product Weight

Shelf Pack Qty.

Boxed

8 Pc. SAE/Metric Stud Removal Set

2.55 lb

Cat. No.

Description

Cat. No.

Description

41761

6mm Removal Socket 3/8" Drive

41768D

1/4" Removal Socket 3/8" Drive

41762D

8mm Removal Socket 3/8" Drive

41767D

5/16" Removal Socket 3/8" Drive

41763D

10mm Removal Socket 1/2" Drive

41765

3/8" Removal Socket 1/2" Drive

41764

12mm Removal Socket 1/2" Drive

41766

7/16" Removal Socket 1/2" Drive

B R A K E

A N D

W H E E L

Stud Removal Sockets Cat. No.

UPC No.

Packaging

Description

Product Weight

41761

082171417610

Bagged

6mm Removal Socket 3/8" Drive

0.15 lb

Shelf Pack Qty.

41762D

082171417627

Bagged

8mm Removal Socket 3/8" Drive

0.15 lb

41763D

082171417634

Bagged

10mm Removal Socket 1/2" Drive

0.15 lb

41764

082171417641

Bagged

12mm Removal Socket 1/2" Drive

0.15 lb

41765

082171417658

Bagged

3/8" Removal Socket 1/2" Drive

0.15 lb

41766

082171417665

Bagged

7/16" Removal Socket 1/2" Drive

0.15 lb

41767D

082171417672

Bagged

5/16" Removal Socket 3/8" Drive

0.15 lb

41768D

082171417689

Bagged

1/4" Removal Socket 3/8" Drive

0.15 lb

Universal Nut Cracker

■■ Splits Most Stubborn Nuts 7/16" (11mm) Through 3/4" (19mm) Across the Flats ■■ Works in Channels Not Accessible to Other Tools ■■ Parallel Action of Pusher Cracks Nuts Without Damaging Bolt Threads ■■ Chisel Rotates 360° to Line Up Parallel to Bolt ■■ Simply Tighten the Screw Until the Nut Splits Has Rugged DropForged Frame ■■ Do Not Use on Heat-Treated Nuts ■■ Length: 6-3/4" ■■ This is a Serviceable Product UPC No.

Packaging

Description

Product Weight

715D

082171007156

Carded

Universal Nut Cracker

1.50 lb

71575D

082171715754

Bagged

Replacement Plunger

0.05 lb

71574

082171715747

Bagged

Replacement Chisel

0.25 lb

71573D

082171715730

Bagged

Replacement Ball Bearings

0.01 lb

Cat. No.

6 Pc. 3/8" Drive Impact Driver Set

UPC No.

1140D

082171011405

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

6 Pc. 3/8" Drive Impact Driver Set

1.53 lb

412402

082171412424

Bagged

No. 2 Phillips Insert Bit 5/16" Dr.

0.05 lb

412403

082171412400

Bagged

Replacement No. 3 Phillips Insert Bit 5/16" Dr.

0.01 lb

412406

082171412462

Bagged

Replacement 6-8 Slotted Insert Bit 5/16" Dr.

0.01 lb

412410

082171412417

Bagged

Replacement 8-10 Slotted Insert Bit 5/16" Dr.

0.01 lb

S P E C I A L T Y

Cat. No.

A U T O

1223

B R A K E

A N D

W H E E L

Stud Extractor

■■ Removes 1/4" (6mm) to 3/4" (19mm) Studs ■■ Cam Wheel Grips Within 9/32" of Flat Surface to Hold Stud ■■ Drive Socket Will Not Bind ■■ Use 1/2" Square Drive Tools to Operate

Cat. No.

UPC No.

1708DD

082171017087

Packaging

Description

Product Weight

Carded

Stud Extractor

0.85 lb

Pro Swivoil™ Filter Wrench

■■ 180 Degree Swivel Action ■■ Cushion Grip Dual Material Handle Provides Greater Comfort and Better Gripping Force ■■ Stainless and Plated Steel Material Band for Lifetime Corrosion Resistance ■■ Dimpled for Extra Gripping Power ■■ Specially Designed to Fit Today's Oil Filters

Cat. No.

UPC No.

3941

082171394102

3942

082171394201

3943

082171394300

3944

082171394409

Packaging

Description

Min Diameter

Max Diameter

Product Weight

Shelf Pack Qty.

Carded

Pro Swivoil™ Filter Wrench - Small

Carded

Pro Swivoil™ Filter Wrench - Medium

2.52 in, 64 mm

2.99 in, 76 mm

1.20 lb

2.87 in, 73 mm

3.27 in, 83 mm

1.30 lb

Carded

Pro Swivoil™ Filter Wrench - Large

Carded

Pro Swivoil™ Filter Wrench - Extra Large

3.50 in, 89 mm

3.90 in, 99 mm

1.30 lb

3.78 in, 96 mm

4.37 in, 111 mm

1.40 lb

A U T O

S P E C I A L T Y

Swivoil™ Filter Wrench

1224

■■ Wrenches are Made of High-Quality Steel With a Zinc-Plated Yoke and a Blackened Band for Resistance to Rust and Corrosion ■■ Plastisol-Dipped Handle will not Slide Off During Use ■■ Even Hard-To-Reach Oil Filters Will Come Off Easily with this Swivel-Handle Oil Filter Wrench ■■ Unique Yoke and Link Assembly Allows a Good Grip, but will not Crush the Filter ■■ Swivel Tension is Adjusted Easily by Using the Nut and Bolt on the Handle Cat. No.

UPC No.

Packaging

Description

Min Diameter

Max Diameter

Product Weight

Shelf Pack Qty.

3324D

082171033247

Carded

Swivoil™ Filter Wrench - Small

2.50 in, 64 mm

3.00 in, 76 mm

0.70 lb

3083D

082171030833

Carded

Swivoil™ Filter Wrench - Medium

2.88 in, 73 mm

3.25 in, 83 mm

0.70 lb

3082D

082171030826

Carded

Swivoil™ Filter Wrench - Large

3.50 in, 89 mm

3.88 in, 98 mm

0.75 lb

3527

082171035272

Carded

Swivoil™ Filter Wrench - Extra Large

3.88 in, 96 mm

4.38 in, 111 mm

0.80 lb

O I L

F I L T E R

W R E N C H E S

Universal Oil Filter Wrench

■■ Wrench Removes Oil Filters 3-7/16" to 3-3/4" (87 to 95mm) in Diameter ■■ Its Positive Grip Lets You Exceed Normal Torque Requirements ■■ The Band Will Not Puncture or Crush Filter

Cat. No.

UPC No.

190

082171001901

Packaging

Description

Min Diameter

Max Diameter

Product Weight

Shelf Pack Qty.

Carded

Universal Oil Filter Wrench

3.44 in, 87 mm

3.75 in, 95 mm

0.65 lb

Oil Filter Wrench

■■ Wrench Removew Oil Filters 3-1/16" to 3-7/16" (78 to 87mm) in Diameter ■■ Positive Grip Lets You Exceed Normal Torque Requirements ■■ Band Will Not Puncture or Crush Filter

Cat. No.

UPC No.

191

082171001918

Packaging

Description

Min Diameter

Max Diameter

Product Weight

Shelf Pack Qty.

Carded

Oil Filter Wrench

3.06 in, 78 mm

3.44 in, 87 mm

0.55 lb

Fuel and Oil Filter Wrench

UPC No.

192

082171001925

Packaging

Description

Min Diameter

Max Diameter

Product Weight

Shelf Pack Qty.

Carded

Fuel and Oil Filter Wrench (2-1/4" to 2-9/16")

2.25 in, 57 mm

2.56 in, 65 mm

0.55 lb

S P E C I A L T Y

Adjustable Oil Filter Wrench

■■ Notched Link Set to 1 to 3 Positions - Removes Oil Filters From 2-3/4" to 3-3/4" (70 to 95mm) in Diameter ■■ Wide Range of Sizes Makes this Wrench Very Universal

Cat. No.

UPC No.

2187D

082171021879

A U T O

Cat. No.

■■ Wrench Removes Gasoline and Oil Filters 2-1/4" to 2-9/16" (57 to 65mm) in Diameter ■■ Design Prevents Crushing of the Filter Case

Packaging

Description

Min Diameter

Max Diameter

Product Weight

Shelf Pack Qty.

Carded

Adjustable Oil Filter Wrench (2-3/4" to 3-3/4")

2.75 in, 70 mm

3.75 in, 95 mm

0.58 lb

1225

O I L

F I L T E R

W R E N C H E S

Truck and Tractor Oil Filter Wrench

■■ Removes Oil Filters 4" to 4-3/8" (102 to 111mm) in Diameter Found on Most Tractors and Trucks ■■ Positive Grip Lets You Exceed Normal Torque Requirements Band Will Not Crush Filters

Cat. No.

UPC No.

2010D

082171020100

Packaging

Description

Min Diameter

Max Diameter

Product Weight

Shelf Pack Qty.

Carded

Truck and Tractor Oil Filter Wrench (4" to 4-3/8")

4.00 in, 102 mm

4.38 in, 111 mm

0.70 lb

Square Drive Oil Filter Wrench

■■ For Hard-To-Reach Areas, Use This Wrench in Place of 190 to Remove Filters 3-7/16" to 3-3/4" (87 to 95mm) in Diameter ■■ To Use, Turn Filter With 3/8" Square Drive Tools Band Will Not Crush Filter ■■ Caution: Do Not Use With Power Tools

Cat. No.

UPC No.

2029DD

082171020292

Packaging

Description

Min Diameter

Max Diameter

Product Weight

Shelf Pack Qty.

Carded

Square Drive Oil Filter Wrench (3-7/16" to 3-3/4")

3.44 in, 87 mm

3.75 in, 95 mm

0.48 lb

A U T O

S P E C I A L T Y

5 Pc. Oil Filter End Cap Wrench Set

1226

■■ Provides High Torque Capacity ■■ Handles 140 Ft-Lbs. of Torque to Remove Even the Most Stubborn Filters ■■ Competitive Filter Cap Wrenches Do Not Even Come Close to this Capacity ■■ Metal Drive Insert Will Not Deform or Break Even After Years of Service ■■ Set Comes in Blow Mold Case

Cat. No.

UPC No.

3865

082171038655

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

5 Pc. Oil Filter End Cap Wrench Set in Case

1.25 lb

Cat. No.

Description

Cat. No.

Description

3860D

Oil Filter End Cap Wrench, 14 Flute, 65/67mm Plastic

3863

Oil Filter End Cap Wrench, 15 Flute, 93mm Plastic

3861D

Oil Filter End Cap Wrench, 15 Flute, 74/76mm Plastic

3864D

Oil Filter End Cap Wrench, 36 Flute, 76/80/93mm Plastic

3862D

Oil Filter End Cap Wrench, 14 Flute, 76mm Plastic

O I L

F I L T E R

W R E N C H E S

Filter Cap Wrenches

UPC No.

Packaging

Description

3860D 3861D

Product Weight

Shelf Pack Qty.

082171038600

Carded

Oil Filter End Cap Wrench, 14 Flute, 65/67mm Plastic

0.25 lb

082171038617

Carded

Oil Filter End Cap Wrench, 15 Flute, 74/76mm Plastic

0.25 lb

3862D

082171038624

Carded

Oil Filter End Cap Wrench, 14 Flute, 76mm Plastic

0.25 lb

3863

082171038631

Carded

Oil Filter End Cap Wrench, 15 Flute, 93mm Plastic

0.25 lb

3864D

082171038648

Carded

Oil Filter End Cap Wrench, 36 Flute, 76/80/93mm Plastic

0.25 lb

65mm End Cap Oil Filter Wrench

■■ Wrench Removes and Installs 14-Flute, 65mm Factory Oil Filters on Late-Model Toyota Tercel, Mr2, Celica and 1988 Camry ■■ Use With A ■■ 3/8" Drive Tool or a 1" Wrench

Cat. No.

UPC No.

3253D

082171032530

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

65mm End Cap Oil Filter Wrench

0.30 lb

3" End Cap Oil Filter Wrench

UPC No.

2790D

082171027901

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

3" End Cap Oil Filter Wrench

0.45 lb

3-3/4" End Cap Oil Filter Wrench

■■ Wrench Removes and Installs 3-3/4" (95mm) Diameter Filters with 15-Flute Ends ■■ Designed for use with a 3/8" Square Drive Tool or a 1" Wrench ■■ Tool is Zinc Plated to Resist Rust ■■ Be Sure Fluted End of Filter Matches Wrench

Cat. No.

UPC No.

2991D

082171029912

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

3-3/4" End Cap Oil Filter Wrench

0.50 lb

S P E C I A L T Y

Cat. No.

A U T O

■■ Specially Designed Wrench Removes and Installs Hard-ToReach 3" (76mm) Oil Filters with a 15-Flute End ■■ Fits Various Flute Designs Found on AC/Delco, Fram, Wix, Step, NAPA, Sears, Gard, Motorcraft and Other Filters ■■ Use with 3/8" Square Drive Tool or a 1" Wrench ■■ Durable Steel Wrench is Zinc Plated to Resist Rust ■■ Be Sure Fluted End of Filter Matches Wrench ■■ Caution: Do Not Use With Power Tools

1227

O I L

F I L T E R

W R E N C H E S

Adjustable Oil Filter Wrench Pliers

■■ Pliers Cover a Complete Range of Filter Removal From 2" to 5" (50mm to 125mm) in Diameter ■■ Ratchet and Lock Mechanism Allow for Multiple Settings for Sure Fit, Eliminating Slippage ■■ Jaws are Grooved for Better Holding of the Filter ■■ Forged for Superior Strength ■■ Plastisol Coated Handles Provide a Firm Grip

Cat. No.

UPC No.

3508D

082171035081

Packaging

Description

Min Diameter

Max Diameter

Product Weight

Shelf Pack Qty.

Carded

Oil Filter Pliers - Ratcheting (2" to 5")

2.00 in, 50 mm

5.00 in, 125 mm

1.17 lb

Oil Filter Wrench Pliers

■■ Pliers Remove Stubborn, Stuck Filters ■■ Unique, Dual-Handle Styling Allows for Better Leverage to Bear Down Harder ■■ Tool is Forged for Superior Strength and Double Dipped Handles Provide a Firm Grip

Cat. No.

UPC No.

Packaging

Description

Min Diameter

Max Diameter

Product Weight

Shelf Pack Qty.

3369

082171033698

Carded

Slip Joint Oil Filter Wrench Plier (2-3/4" to 3-1/8")

2.75 in

3.13 in

1.20 lb

3368

082171033681

Carded

Slip Joint Oil Filter Wrench Plier (2-15/16" to 3-5/8")

2.31 in

3.63 in

1.25 lb

082171336904

Carded

Fixed Joint Oil Filter Wrench Plier (2-1/2" to 3-1/4")

2.50 in

3.25 in

1.16 lb

082171336805

Carded

Fixed Joint Oil Filter Wrench Plier (2-11/16" to 3-3/4")

2.69 in

3.75 in

1.22 lb

3369F 3368F

Heavy Duty Oil Filter Wrenches, Wide Band

A U T O

S P E C I A L T Y

■■ Extra Wide 3” Band for Better Grip and Reduced Canister Damage ■■ Not for Use With Impact Guns

1228

Cat. No.

UPC No.

Packaging

Description

Min Diameter

Max Diameter

Product Weight

Shelf Pack Qty.

2320W

082171232008

Carded

Wide Heavy Duty Oil Filter Wrench (4-1/8" to 4-1/2")

4.13 in, 105 mm

4.50 in, 115 mm

0.45 lb

2321W

082171232107

Carded

Wide Heavy Duty Oil Filter Wrench (4-3/8" to 5-1/4")

4.38 in, 110 mm

5.25 in, 130 mm

0.55 lb

2322W

082171232206

Carded

Wide Heavy Duty Oil Filter Wrench (4-3/4" to 5-1/2")

4.75 in, 120 mm

5.50 in, 140 mm

0.65 lb

O I L

F I L T E R

W R E N C H E S

Heavy-Duty Oil Filter Wrenches

■■ Wrenches are Designed for High Torque Requirements of Truck Filters and Used With 1/2" Square Drive Tools ■■ 1-1/2" Wide Bands for Added Strength and Increased Grip Area ■■ Caution: Do Not Use With Power Tools

Cat. No.

UPC No.

2320D

082171023200

Packaging

Description

Min Diameter

Max Diameter

Product Weight

Shelf Pack Qty.

Carded

Heavy Duty Oil Filter Wrench (3-3/4" to 4-1/2")

3.75 in, 95 mm

4.50 in, 115 mm

2.00 lb

2321

082171023217

Carded

Heavy Duty Oil Filter Wrench (4-1/2 to 5-1/4")

4.50 in, 115 mm

5.25 in, 135 mm

2.10 lb

2322D

082171023224

Carded

Heavy Duty Oil Filter Wrench (5-1/4-5-3/4)

5.25 in, 135 mm

5.75 in, 150 mm

2.54 lb

Universal 3-Jaw Oil Filter Wrench

■■ Remove All Passenger Car and Light-Duty Truck Spin-On Type Filters With This Wrench ■■ Sizes Range From 2-1/2" to 3-3/4" ■■ Use With 3/8" Square Drive Tool

Cat. No.

UPC No.

3288D

082171032882

Packaging

Description

Min Diameter

Max Diameter

Product Weight

Shelf Pack Qty.

Carded

Universal 3-Jaw Oil Filter Wrench

2.50 in

3.75 in

0.50 lb

Chain Wrench,1/2" Square Drive

■■ To Effectively Apply Torque, Wrap Tool Around Any Shape Item From 5/8" to 5" (16 to 127mm) in Diameter ■■ Turn With 1/2" Square Drive Tools ■■ Chain Length - 16-1/4"

UPC No.

2595D

082171025952

Packaging

Description

Min Diameter

Max Diameter

Product Weight

Shelf Pack Qty.

Carded

Chain Wrench, 1/2" Drive

0.63 in, 16 mm

5.00 in, 127 mm

1.73 lb

S P E C I A L T Y

Nylon Strap Oil Filter Wrench

■■ Use Wrench on Oil Filters Up to a 6" (152mm) Diameter ■■ Strong Nylon Belt Will Not Slip ■■ Use With 1/2" Square Drive Tools

Cat. No.

UPC No.

3149

082171031496

A U T O

Cat. No.

Packaging

Description

Max Diameter

Product Weight

Shelf Pack Qty.

Carded

Nylon Strap Oil Filter Wrench, 1/2" Drive

6.00 in, 152 mm

0.50 lb

1229

O I L

F I L T E R

W R E N C H E S

Heavy Duty Oil Filter Strap Wrench

■■ Strap is Made of High Strength Oil Resistant Nylon and Handle is Made of Forged Steel ■■ Chrome Plated 3/8" and 1/2" Drive Engagement ■■ Handles Filters With Diameters Up to 9" (229mm) Especially High Torque Requirements on Truck and Tractors

Cat. No.

UPC No.

3529D

082171035296

Packaging

Description

Max Diameter

Product Weight

Shelf Pack Qty.

Carded

Heavy Duty Oil Filter Strap Wrench, 3/8" or 1/2" Drive

9.00 in, 229 mm

0.67 lb

6 Pc. Oil Canister Socket Set Service Kit

A U T O

S P E C I A L T Y

■■ Low Profile Sockets for Better Access

1230

Cat. No.

UPC No.

41890

082171418907

Packaging

Description

Product Weight

Shelf Pack Qty.

Boxed

6 Pc. Oil Canister Socket Set Service Kit

2.08 lb

Cat. No.

Description

Cat. No.

Description

3935

24mm Oil Filter Socket

3932D

32mm Oil Filter Socket

3933D

27mm Oil Filter Socket

3934D

36mm Oil Filter Socket

3936

29mm Oil Filter Socket

3939D

38mm Oil Filter Socket

■■ Low Profile Sockets for Better Access

3 Pc. Oil Canister Socket Set

Cat. No.

UPC No.

Packaging

Description

Product Weight

Shelf Pack Qty.

41830

082171418303

Boxed

3 Pc. Oil Canister Socket Set

1.15 lb

Cat. No.

Description

Cat. No.

Description

3933D

27mm Oil Filter Socket

3934D

36mm Oil Filter Socket

3932D

32mm Oil Filter Socket

O I L

UPC No.

W R E N C H E S

Oil Filter Sockets

■■ Low Profile Sockets for Better Access Cat. No.

F I L T E R

Packaging

Description

Product Weight

Shelf Pack Qty.

3935

082171039355

Carded

24mm Oil Filter Socket

0.22 lb

3933D

082171393303

Carded

27mm Oil Filter Socket

0.25 lb

3936

082171039362

Carded

29mm Oil Filter Socket

0.27 lb

3932D

082171393204

Carded

32mm Oil Filter Socket

0.30 lb

3934D

082171393402

Carded

36mm Oil Filter Socket

0.35 lb

3939D

082171039393

Carded

38mm Oil Filter Socket

0.45 lb

Steering Service Set

Cat. No.

UPC No.

41620D

082171416200

Packaging

Description

Product Weight

Shelf Pack Qty.

Boxed

Steering Service Set

4.36 lb

Cat. No.

Description

Cat. No.

Description

2291D

Crankshaft Pulley Puller (Steering Wheel Puller)

Lock Plate Depressor Frame

3509D

Steering Wheel Lock Plate Remover

Lock Plate Remover Collars & Nut Washer

3510D

Steering Wheel Puller Legs

Screw Package

3906D

Steering Wheel Pivot Pin

Steering Wheel Puller Legs

■■ Use with 2291D Steering Wheel Puller to Remove Steering Wheels on Vehicles that are not Pre-Drilled to Receive Standard Bolts

UPC No.

3510D

082171035104

Packaging

Product Weight

Shelf Pack Qty.

Carded

0.40 lb

A U T O

Cat. No.

UPC No.

Packaging

Product Weight

Shelf Pack Qty.

350971

082171509711

Industrial Polybag

0.63 lb

350972

082171509728

Industrial Polybag

0.54 lb

3509D

082171035098

Carded

1.30 lb

S P E C I A L T Y

Steering Wheel Lock-Plate Remover and Installer

■■ Fits GM Cars with S.I.R. Air Bags ■■ Works on Older GM, Chrysler, and AMC Vehicles Previously Serviced by Part # 2414 ■■ Narrower Yoke Prevents Damage to the Lock Plate ■■ Separate SAE (black) and Metric (zinc) Threaded Collars Screw to the Center Steering Column ■■ Center Screw Uses a 3/8" Wrench ■■ Supplied Hex Screw Locks Down Telescoping Steering Columns while Removing Lock Plate ■■ Hex Screw can be Stored on Side of Puller Yoke

1231

S T E E R I N G

A N D

S U S P E N S I O N

Pivot Pin Remover

■■ Tilt Steering Columns are Much Easier to Service When Your Tool Box Has One of These Pivot Pin Removers in It ■■ Works on 1969-Current GM, Chrysler, and Ford Vehicles With Saginaw Steering Columns

Cat. No.

UPC No.

3906D

082171390609

Packaging

Product Weight

Shelf Pack Qty.

Carded

0.15 lb

Front End Service Set

A U T O

S P E C I A L T Y

■■ Allows for Easy Removal of the Most Popular Types of Pitman Arms, Tie Rods, and Ball Joints

1232

Cat. No.

UPC No.

41690

082171416903

Packaging

Description

Product Weight

Shelf Pack Qty.

Boxed

Front End Service Set

12.65 lb

Cat. No.

Description

Cat. No.

Description

2289D

Pitman Arm Puller

Tie Rod Puller

3916D

Universal Ball Joint Separator

Universal Tie Rod End Remover

3917D

Tie Rod End Puller and Pitman Arm Puller

Pneumatic Tie Rod / Ball Joint Separator Kit 3 Sizes

Cat. No.

UPC No.

41610

082171041617

Packaging

Description

Product Weight

Shelf Pack Qty.

Boxed

Pneumatic Tie Rod / Ball Joint Separator Kit - 3 sizes

4.70 lb

S T E E R I N G

A N D

S U S P E N S I O N

Indexing Ball Joint and Tie Rod Separator Set

■■ Pneumatic and Manual Hammer Attachment ■■ Indexing Feature for Access and Leverage when Prying Suspension Components Apart ■■ Index to 90° to Strike Hammer Surface with Hand Safely Out of Way ■■ Dipped Grip on Manual Hammer Attachment to Absorb Shock and Eliminate Slip ■■ Blowmold Case for Storage

Cat. No.

UPC No.

43990

082171439902

Packaging

Description

Product Weight

Shelf Pack Qty.

Boxed

Indexing Ball Joint and Tie Rod Separator Set

5.43 lb

Indexing Ball Joint Separator

■■ Pneumatic and Manual Hammer Attachment ■■ Indexing Feature for Access and Leverage when Prying Ball Joint Components Apart ■■ Index to 90° to Strike Hammer Surface with Hand Safely Out of Way ■■ Dipped Grip on Manual Hammer Attachment to Absorb Shock and Eliminate Slip Cat. No.

UPC No.

3990

082171039904

Packaging

Description

Product Weight

Shelf Pack Qty.

Boxed

Indexing Ball Joint Separator - 15/16"

3.25 lb

Indexing Tie Rod Separator

Cat. No.

UPC No.

3991

082171039911

Packaging

Description

Product Weight

Shelf Pack Qty.

Boxed

Indexing Tie Rod Separator - 21/32"

3.20 lb

S P E C I A L T Y

Ball Joint Separator

■■ Tool Separates Ball Joints From Steering Knuckles ■■ To Use, Insert 15/16" Opening Between Parts and Strike With Hammer ■■ Separator is Forged to Withstand Hard Usage ■■ Overall Length: 12"

Cat. No.

UPC No.

2287D

082171022876

A U T O

■■ Pneumatic and Manual Hammer Attachment ■■ Indexing Feature for Access and Leverage when Prying Tie Rod Components Apart ■■ Index to 90° to Strike Hammer Surface with Hand Safely Out of Way ■■ Dipped Grip on Manual Hammer Attachment to Absorb Shock and Eliminate Slip

Packaging

Description

Product Weight

Shelf Pack Qty.

Boxed

Ball Joint Separator

1.99 lb

1233

S T E E R I N G

A N D

S U S P E N S I O N

Tie Rod Separator

■■ Powerful Tool Separates Tie Rods ■■ Insert 21/32" Opening Between Parts and Strike With Hammer to Separate ■■ Separator is Forged to Withstand Hard Usage ■■ Overall Length: 12" ■■ Caution: for Intended Use Only

Cat. No.

UPC No.

2288D

082171022883

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Tie Rod Separator

2.02 lb

Universal Ball Joint Separator

■■ For Separating the Ball Joint From the Spindle Support Arm on Domestic and Import Front Wheel Drive Vehicles ■■ Adjustable for Different Size Ball Joints ■■ 1-1/8" & 2-1/8" (30 & 56mm) Maximum Opening Capacity

Cat. No.

UPC No.

3916D

082171391606

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Universal Ball Joint Separator

1.13 lb

Tie Rod End Puller and Pitman Arm Puller

A U T O

S P E C I A L T Y

■■ Use As a Pitman Arm Remover for Many Small Domestic Rear Wheel Drive Vehicles, or as a Tie Rod End Puller for Many Domestic and Import Vehicles ■■ 1-1/16" & 2-1/8" (27 & 56mm) Maximum Opening Capacity

1234

Cat. No.

UPC No.

3917D

082171391705

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Tie Rod End Puller and Pitman Arm Puller

1.00 lb

Deluxe Inner Tie Rod Tool

■■ Remove and Install Inner Tie Rods on Many GM and Some Chrysler Products That Have a Complete Hex With a Ball Socket or Just 2 Flats on the Inner End That Measure 1-7/16" Across ■■ Tool Can Also Be Used on All Inner Tie Rods With 1-3/16" and 1-5/16" Hex Sizes

Cat. No.

UPC No.

3312D

082171033124

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Deluxe Inner Tie Rod Tool

2.57 lb

S T E E R I N G

A N D

S U S P E N S I O N

Pitman Arm Puller

■■ Puller Removes Full-Size Pitman Arms ■■ To Use, Mount Jaws Over Pitman Arm and Turn Center Screw with Wrench Until Tight ■■ Strike Center Screw with Hammer to Release Pitman Arm ■■ No Other Tools are Needed ■■ Puller Has a Drop-Forged and Heat-Treated Steel Yoke ■■ Screw Size 5/8"-18 Thread

Cat. No.

UPC No.

2289D

082171022890

Packaging

Product Weight

Shelf Pack Qty.

Carded

1.95 lb

CV Boot Clamp Tool

■■ Allows for Proper Installation of C Boot ■■ Crimps Joints While With Center Pushing Feature ■■ Works With Hand, 1/2" Drive Ratchets, or Torque Wrench ■■ High Leverage Design

Cat. No.

UPC No.

3955

082171039553

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Replacement Part CV Boot Clamp (replaces 424)

1.25 lb

Macpherson Strut Spring Compressor

■■ Use This Tough Tool for Quick and Easy Replacement of Struts, Springs and Shock Absorbers ■■ Compress Springs Both On or Off the Vehicle With Hand or Power Tools ■■ Maximum Capacity: 6" OD ■■ Wire Diameter: 5/8" ■■ Caution: Follow Instructions Provided With This Tool

UPC No.

3387

082171033872

Description

Product Weight

Shelf Pack Qty.

Carded

Macpherson Strut Spring Compressor

6.47 lb

Product Weight

Shelf Pack Qty.

S P E C I A L T Y

Packaging

Coil Spring Compressor

■■ Use Tool to Remove and Install Automotive Coil Springs Up to 5-5/8" Outside Diameter ■■ Designed to Grasp a Spring With a Maximum 3/4" Wire Diameter ■■ Can Be Used on Straight or Curved Springs ■■ Forged Alloy Steel Arms Hug Contour of Helix ■■ Caution: Read All Instructions Carefully Before Using This Tool ■■ Caution: For Intended Use Only ■■ Caution: Do Not Use With Power Tools Cat. No.

UPC No.

Packaging

Description

A U T O

Cat. No.

3450D

082171034503

Carded

Coil Spring Compressor

4.55 lb

345071

082171450716

Bagged

Replacement Clip

0.55 lb

1235

S T E E R I N G

A N D

S U S P E N S I O N

CV Joint Boot Clamp Tightening Wrench

■■ Works by Hand or Ratchet with 1/2" Socket ■■ Includes Built in Cutter ■■ Use Wrench to Securely Fasten Band-It® Style Free End Clamps, Roll Band and Clips or Band-It Jr® Style Pre-Formed C Boot Clamps ■■ Mandrel Tightens the Clamp, Holding it in Place Until the Ears of the Clamp are Folded Down ■■ Use Built in Cutter to Remove Excess Band Material Cat. No.

UPC No.

3191D

082171031915

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

CV Joint Boot Clamp Tightening Wrench

0.55 lb

Ramo-Matic Zerk Fitting Tool

Cat. No.

UPC No.

416D

082171004162

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Ramo-Matic Zerk Fitting Tool

0.40 lb

A U T O

S P E C I A L T Y

Hydraulic Clutch Quick Disconnect Tool

1236

■■ Used to Release Fingers that Hold Clutch Line to the Clutch Sleeve Cylinders ■■ Works on Hard to Access Couplings Found on Ford Light-Duty Trucks, Ranger, Explorer and 1989 and Newer Thunderbird and Cougar Vehicles with Hydraulic Clutch

Cat. No.

UPC No.

3413D

082171034138

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Ford Clutch Coupling Tool

0.11 lb

Automatic Transmission Clutch-Spring Compressor

■■ Compresses Automatic-Transmission Clutch Springs on Some GM, Ford, Toyota and other Transmissions ■■ Permits Easy Removal and Installation of Snap Rings ■■ Job Can Be Completed Without Removing Center Shaft and Clutch Assembly from Transmission Housing ■■ To Use, Force Legs in and Catch Jaws Inside Transmission Drum Groove ■■ Loosen Wing Nuts and Adjust Pushers ■■ Tighten Screw Until Lock Ring is Free to Be Removed

Cat. No.

UPC No.

2398D

082171023989

Packaging

Description

Product Weight

Shelf Pack Qty.

Boxed

Automatic Transmission Clutch-Spring Compressor

3.55 lb

S T E E R I N G

A N D

S U S P E N S I O N

10 Pc. Clutch Aligning Set

■■ Align Single Disc Clutches on American and Imported Cars, Light Trucks and Tractors ■■ Adapter Fits Through Clutch Plate and into Pilot Bushing or Bearing ■■ Tapered Cone Fits Into Clutch Hole and Aligns Clutch Plate Properly ■■ Set Includes Shaft and 8 Two-Stepped Pilot Bearing Adapters Covering 16 Sizes ■■ Plate Aligning Cone has 1-1/8" Maximum Diameter Taper. Pilot Bushing Cone Taper 0.734" to 1.17" (18.64mm to 29.72mm) ■■ Zinc Adapters for Import 0.472" & 0.500" (12mm & 12.7mm), 0.622" & 0.641" (15.8mm & 16mm), 0.688" & 0.710" (17.4mm & 18mm), 0.826" & 0.875" (21mm & 22.2mm) ■■ Black Adapters for Domestic 0.561" & 0.590" (14.2mm & 15mm), 0.749" & 0.787" (19mm & 20mm), 0.812" & 0.874" (20.6mm & 22.2mm), 0.984" & 1.181" (25mm & 30mm) Cat. No.

UPC No.

2420D

082171024207

Packaging

Description

Product Weight

Shelf Pack Qty.

Boxed

Clutch Aligning Set

2.08 lb

Seal and Pilot Bearing Puller

■■ Hooked End Removes Seals and Pilot Bearings without Breaking ■■ Roll Hook Under Edge of Seal and Hit Striking Block With Hammer ■■ Hook Can Be Used on Slide Hammer for Frozen Seals ■■ Puller Has 1/2"-13 UNC Threads ■■ Puller is Not Recommended for Caged Needle Bearings ■■ Damage to Caged Needle Bearings May Occur

Cat. No.

UPC No.

2824D

082171028243

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Seal and Pilot Bearing Puller

1.55 lb

A U T O

Seal Puller

Cat. No.

UPC No.

3245

082171032455

S P E C I A L T Y

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

Seal Puller

0.55 lb

1237

G E N E R A L

P U R P O S E

Snap Ring Assortment

■■ Starter Assortment Includes 107 Different Size Internal and External Snap Rings in a Molded Plastic Case ■■ Actual-Size Silhouette Chart in the Lid Makes Identification Easy ■■ Ideal Assortment for Jobbers and Dealers to Keep on Hand ■■ Refills are Available ■■ Overall Case Size: 18 X 13 X 2-1/2"

Cat. No.

UPC No.

2550D

082171025501

Description

Product Weight

Shelf Pack Qty.

Boxed

Snap Ring Assortment

6.10 lb

Fender Cover, Magnetic

■■ Magnetic ■■ Oil Resistant ■■ 34-1/2" Wide ■■ 18-1/2" Tall

Packaging

Cat. No.

UPC No.

86991

099575869914

Packaging

Description

Product Weight

Shelf Pack Qty.

Boxed

Magnetic Fender Cover

1.53 lb

A U T O

S P E C I A L T Y

Mechanics Gloves

1238

Cat. No.

UPC No.

86990

099575869907

Packaging

Description

Product Weight

Shelf Pack Qty.

Retail Packaging

Mechanics Gloves

0.20 lb

Aluminum Flashlight

■■ Aluminum Body with Rubber Grip ■■ Five LED Bulbs Above 13,000 MCD White Light ■■ Weatherproof ■■ Rubber Ring Around Head of Flashlight ■■ Includes Carrying Case

Cat. No.

UPC No.

83132

099575831324

Packaging

Description

Product Weight

Shelf Pack Qty.

Retail Packaging

LED Flashlight with Carry Case

0.25 lb

G E N E R A L

P U R P O S E

O-Ring and Seal Pick

■■ Remove and Install O-Rings and Small Oil Seals ■■ Hardened Tip Keeps a Sharp Point ■■ Tool is Ideal for Transmission, Power Steering Pump, Disc Brake and Air Conditioning Repairs

Cat. No.

UPC No.

2554D

082171025549

Packaging

Description

Product Weight

Carded

O-Ring and Seal Pick

0.04 lb

5 Pc. Hook and Pick Set

■■ Five-Piece Set Includes a 5" Aluminum Handle Knurled for a Sure Grip ■■ Includes the Following Heat-Treated, High Carbon Steel Picks: O-Ring, 90°, Straight and Hook ■■ Use Picks to Pull O-Rings, Seals, Cotter Pins and Brushes Quickly and Easily

Cat. No.

UPC No.

3121D

082171031212

Packaging

Description

Product Weight

Boxed

Hook and Pick Set

1.10 lb

Packaging

Description

Product Weight

Carded

Vibro Engraver

0.70 lb

Packaging

Description

Product Weight

Carded

Scriber

0.15 lb

Vibro Engraver

■■ Use to Identify Valuables Permanently ■■ Carbide Tip Engraves Metal, Plastic, Wood, Glass and Other Surfaces ■■ Variable Speed Knob Controls the Depth of Engraving ■■ Tool Operates on 115V AC

UPC No.

2520

082171025204

S P E C I A L T Y

Scriber

■■ Sharp, Tempered Point Scribes Metal ■■ Hooked End Removes O-Rings, Seals and Gaskets ■■ Has a 90° Hook ■■ Length: 8" Cat. No.

UPC No.

2979

082171029790

A U T O

Cat. No.

1239

G E N E R A L

P U R P O S E

Universal Nut Cracker

■■ Splits Most Stubborn Nuts 7/16" (11mm) Through 3/4" (19mm) Across the Flats ■■ Works in Channels Not Accessible to Other Tools ■■ Parallel Action of Pusher Cracks Nuts Without Damaging Bolt Threads ■■ Chisel Rotates 360° to Line Up Parallel to Bolt ■■ Simply Tighten the Screw Until the Nut Splits Has Rugged DropForged Frame ■■ Do Not Use on Heat-Treated Nuts ■■ Length: 6-3/4" ■■ This is a Serviceable Product Cat. No.

UPC No.

Packaging

Description

715D 71575D

Product Weight

082171007156

Carded

Universal Nut Cracker

1.50 lb

082171715754

Bagged

Replacement Plunger

0.05 lb

71574

082171715747

Bagged

Replacement Chisel

0.25 lb

71573D

082171715730

Bagged

Replacement Ball Bearings

0.01 lb

6 Pc. 3/8" Drive Impact Driver Set

A U T O

S P E C I A L T Y

1240

Cat. No.

UPC No.

1140D

082171011405

Packaging

Description

Product Weight

Shelf Pack Qty.

Carded

6 Pc. 3/8" Drive Impact Driver Set

1.53 lb

412402

082171412424

Bagged

No. 2 Phillips Insert Bit 5/16" Dr.

0.05 lb

412403

082171412400

Bagged

Replacement No. 3 Phillips Insert Bit 5/16" Dr.

0.01 lb

412406

082171412462

Bagged

Replacement 6-8 Slotted Insert Bit 5/16" Dr.

0.01 lb

412410

082171412417

Bagged

Replacement 8-10 Slotted Insert Bit 5/16" Dr.

0.01 lb

Keyed Industrial Chucks................... 1244 Keyless Industrial Chucks................. 1248 Rubber-FlexÂ® Collet Chucks ........... 1250 Arbors................................................ 1252 Sleeves, Sockets & Ejecting Drifts... 1255 Portable Tool Chucks ....................... 1256 Special Purpose Chucks................... 1258 Keys & Accessories........................... 1258

17 J A C O B S C H U C K S

1241

C H U C K S

Chucks Jacobs® chucks, high precision tool holders, arbors, and related accessories have made Jacobs the leading brand of precision tool holding and work holding devices in the world. For more than 100 years, superior grip and accuracy have made Jacobs the industry leader, with Jacobs technology applied to everything from sophisticated CNC machining centers to cordless portable drills. Our commitment to excellence and innovation and continued investment in research and development provide us with the ability to maintain this leadership position.

HAND-TITE® KEYLESS CHUCKS Split Bite Jaw increases grip over standard bite chucks by providing more contact with the bit Precision Operation meets or exceeds stringent DIN run—out and dimensional specifications

Hammerlock® positive locking mechanism prevents loosening in hammer and other high vibration applications

Provides high mechanical advantage to convert hand tightening torque into superior bit gripping force

Material and surface finish combinations result in increased comfort and performance Constructed of high performance material to maximize durability and performance

Anti-lock Nut prevents chuck from locking open

MULTI-CRAFT KEYED CHUCKS

J A C O B S

C H U C K S

Through-hardened jaws for hard, wearresistant gripping surfaces

1242