KW3MSMOMM-Komatsu Wa470-3h Operation And Maintenance Manual.pdf by www.heydownloads.com

Operation & Maintenance Manual

WHEEL LOADER SERIAL NUMBERS WA470H21242

WARNING Unsafe use of this machine may cause serious injury or death. Operators and maintenance personnel must read this manual before operating or maintaining this machine. This manual should be kept near the machine for reference and periodically reviewed by all personnel who will come into contact with it.

NOTICE Komatsu has had the operating and maintenance instructions translated into all the languages of the member states in the European Union. Should you wish to have a version of the operating instructions in another language, please donâ&#x20AC;&#x2122;t hesitate to ask at your local dealerâ&#x20AC;&#x2122;s.

VEAM480600

Introduction

1. Introduction

1-1

1.1. Foreword

1.1.

Introduction

Foreword

This manual takes into account legal directives and regulations necessary to ensure the safe and effective use of the machine. A brochure with instructions is available for operation on public roads in Germany. Keep this manual within reach at all times and ensure that operating personnel read it at regular intervals. Call Komatsu or your local Komatsu dealer and request a replacement if this manual is lost or is no longer legible because of soiling. Pass the manual on to the new owner if selling the machine. Our constant efforts to improve the design of our machines can result in changes to construction which may differ slightly from the details in this manual. Please contact Komatsu or your local Komatsu dealer if you require the latest available information on your machine or if you have questions regarding the contents of this manual. Auxiliary equipment and accessories named in this manual may not be available in your region. If this is so, please contact Komatsu or your local Komatsu dealer with enquiries about the equipment you require.

DANGER ●

Incorrect operation and maintenance of this machine can be dangerous and lead to injury.

●

The operator and maintenance personnel must read this manual before commencing operation or maintenance.

●

The procedures and preventative measures named in this manual apply only for the intended use of the machine. If you use the machine for any other purpose than its intended function, you are responsible for ensuring that no danger is caused to you or others. Under no circumstances may you carry out work or functions which are explicitly forbidden in this manual.

●

Safety regulations can be found under section "1.2. Safety information" on page 1-4 and in the chapter "2. Safety" on page 2-1 and following.

EU Directives Machines supplied by us fulfil the Directive for Machinery 89/392/ EEC and its supplements 91/368 and 93/44 for Germany. If the machine is being used in another country, it is possible that certain safety regulations and specifications may not be fulfilled for use in that country. For example, priority vehicle warning lamps may be used in some countries, but are forbidden in others.

1-2

Introduction

1.1. Foreword

Please contact our dealer before using the machine if you have any questions regarding the fulfilment of standards and regulations in a specific country. Notes on subsequent installation of electrical and electronic equipment and components Electrical and electronic equipment and/or components which have been installed subsequently, emit electromagnetic radiation which can influence the function of the electronic components and sections of the machine. This can have an influence on the safety of the machine and endanger persons. For this reason, please ensure that the following safety instructions are observed. If you are installing electrical or electronic equipment and/or components in the machine and connect them to the vehicle electrical system, you must check at own responsibility that the installations do not cause any disturbance to the vehicle’s electronic system or other components. Above all, you must ensure that any subsequently installed electrical and electronic components comply with the EMV Directive 89/336/EEC in its current edition and bear the CE mark. The following requirements also have to be met for subsequent installation of mobile communication systems (e.g. radio, telephone): ●

Only equipment approved by national legislation (e.g. BZT approval for Germany) may be used

●

The unit must be fixed in position

●

Portable or mobile units may only be used inside the vehicles if they are connected to a fixed outside antenna

●

The transmitter unit must be spatially separated from the vehicle’s electronic system

●

Make sure when installing the antenna that this is installed correctly with good earth connection between antenna and vehicle mass

Also observe machine manufacturer’s installation instructions for wiring, installation and maximum permitted power consumption.

1-3

1.2. Safety information

1.2.

Introduction

Safety information

Most accidents are cause by failure to observe fundamental safety regulations during the operation and maintenance of the machines. Please read the safety and warning instructions in this manual and on the machine before operating or servicing the machine and observe them at all times in order to avoid any accidents. The following words are used in this manual and on stickers on the machine to signify safety instructions and enable them to be recognized as such at a glance:

DANGER This word is used for safety messages and safety label where there is a probability of serious injury if the danger is not avoided. The safety instruction or sticker contains precautions which must be observed in order to avoid the danger. Failure to do so can also result in damage to the machine.

WARNING This word is used for safety messages and safety label where there is a potentially dangerous situation which could lead to serious injury if the danger is not avoided. The safety instruction or sticker contains precautions which must be observed in order to avoid the danger. Failure to do so can also result in damage to the machine.

CAUTION This word is used for safety messages and safety label in the event of danger which could result in minor or partly serious injuries if the danger is not avoided. It may also relate to dangers which may only result in damage to the machine.

NOTE This word is used for precautions which have to be taken in order to avoid situations which could result in shortening the service lift of the machine. The safety instructions are listed in the chapter "2. Safety" on page 2-1 and following. We cannot foresee all circumstances which could result in potential danger during maintenance and operation. The safety instructions in this manual and on the machine, therefore, do not necessarily contain all possible safety precautions. If you are using a procedure or measure not explicitly permitted and recommended in this manual, you must ensure that you and anyone

1-4

Introduction

1.2. Safety information

else can use any such procedure without any danger or damage to the machine whatsoever. Please contact Komatsu or your local Komatsu dealer if you have any doubts about the safety of any procedures.

1-5

1.3. Introduction

1.3.

Introduction

1.3.1. Intended use This loader is a machine with independent transmission, moving on chains or wheels. Driving in forward direction, the loader can load or dig material using its attachments intended for loading operations (i.e. bucket). The standard operation cycle of a loader includes filling up and loading of the bucket, transporting the material and emptying the bucket. Refer to chapter "3.3.10. Wheel loader operations" on page 3-85 for more details.

1.3.2. Features ●

Curved glass and improved sealing for reduced noise, low vibration cab, easy mount

●

Console and steering post with neat foot area and no protrusions, giving the same comfortable feeling as when driving in a car.

●

Easy gear shifting with automatic transmission equipped with kick-down

●

Fully hydraulic, effective brake control with no need to drain water or any need to worry about freezing or rust

●

Maintenance-free,wet-type disc parking brake (acts also as emergency brake)

●

Considerable reduction in maintenance operations with use of auto-greasing system

●

Remote boom positioner allows for setting the desired position for stopping the bucket from the operator's seat

●

Large capacity pump and 2-stage hydraulic system for reduced cycle time and increased productivity

●

One touch panel control and air conditioner with new refrigerant installed

●

Full fender system installed to prevent mud or water from splashing on or around machine

1-6

Introduction

1.3. Introduction

1.3.3. Breaking-in the machine Your Komatsu machine has been thoroughly adjusted and tested before shipment. However, operating the machine under severe conditions at the beginning can adversely affect the performance and shorten the machine life. Be sure to break in the machine for the initial 100 hours (as indicated by the service meter.) During breaking in: â&#x2014;?

Idle the engine for 5 minutes after starting it up.

â&#x2014;?

Avoid operation with heavy loads or at high speeds.

â&#x2014;?

Avoid sudden starts, sudden acceleration, sudden steering und sudden stops except in cases of emergency.

The precautions given in this manual for operating, maintenance, and safety procedures are only those that apply when this product is used for the specified purpose. If the machine is used for a purpose that is not listed in this manual Komatsu cannot bear any responsibility for safety. All consideration of safety in such operations is the responsibility of the user. Operations that are prohibited in this manual must never be carried out under any circumstances.

1-7

1.4. Location of plates, table to enter serial no. and distributor

1.4.

Introduction

Location of plates, table to enter serial no. and distributor

1.4.1. Machine identification plate Position of the identification plate On the centre right of the front frame.

GK100210

Position of stamp This is stamped on the centre of the front frame on the right-hand side of the machine.

GK100211

Machine identification plate

1-8

Introduction

1.4. Location of plates, table to enter serial no. and distributor

1.4.2. Engine identification plate Position of identification plate On the upper right-hand side of the cylinder block, when seen from the fan.

Position of stamp This is stamped on the right side of the engine cylinder block as seen from the fan.

1.4.3. Table to enter serial no. and distributor Machine serial No.:

Engine serial No.:

Name of Dealer:

Address:

Phone:

Service Personnel for your machine:

1-9

1.5. Table of contents

1.5.

Introduction

Table of contents

1. Introduction .................................................................................................1-1 1.1. Foreword....................................................................................................................................................... 1-2 EU Directives .................................................................................................................................... 1-2 1.2. Safety information........................................................................................................................................ 1-4 1.3. Introduction .................................................................................................................................................. 1-6 1.3.1.

Intended use ..................................................................................................................................... 1-6

1.3.2. 1.3.3.

Features............................................................................................................................................ 1-6 Breaking-in the machine ................................................................................................................... 1-7

1.4. Location of plates, table to enter serial no. and distributor..................................................................... 1-8 1.4.1. 1.4.2.

Machine identification plate .............................................................................................................. 1-8 Engine identification plate................................................................................................................. 1-9

1.4.3.

Table to enter serial no. and distributor ............................................................................................ 1-9

1.5. Table of contents ....................................................................................................................................... 1-10 1.6. Dimensions, weights and operating data ................................................................................................ 1-18 1.6.1.

WA470-3: Dimensions, weights and operating data ....................................................................... 1-18

1.6.2.

WA470-3 Magnum: Dimensions, weights and operating data ........................................................ 1-19

1.6.3.

WA470-3 High-lift: Dimensions, weights and operating data.......................................................... 1-20

1.7. CE-conforming equipment ........................................................................................................................ 1-21 1.7.1.

CE-conforming equipment - part 1.................................................................................................. 1-21

1.7.2. 1.7.3.

CE-conforming equipment - part 2.................................................................................................. 1-22 CE-conforming equipment - part 3.................................................................................................. 1-23

1.7.4.

Manufacturer-supplied CE-conforming equipment, according to document 419-93-H1160 ........... 1-24

1.7.5.

Manufacturer-supplied CE-conforming equipment, according to document 419-93-H1160 ........... 1-26

1.8. Loading and securing................................................................................................................................ 1-28

2. Safety ...........................................................................................................2-1 2.1. General safety measures............................................................................................................................. 2-2 2.1.1. 2.1.2.

Safety instructions ............................................................................................................................ 2-2 Safety devices .................................................................................................................................. 2-2

2.1.3.

Emergency exit ................................................................................................................................. 2-2

2.1.4. 2.1.5.

Clothing and personal protection ...................................................................................................... 2-2 Machine modifications ...................................................................................................................... 2-3

2.1.6.

Before you leave the driver's seat..................................................................................................... 2-3

2.1.7. 2.1.8.

Mounting and dismounting................................................................................................................ 2-3 Fire prevention and fire fighting ........................................................................................................ 2-4

2.1.9.

Protection against asbestos dust...................................................................................................... 2-6

1-10

Introduction

1.5. Table of contents

2.1.10. Protection against injuries................................................................................................................. 2-6 2.1.11. Working at high temperatures........................................................................................................... 2-7 2.1.12. Roll-over protection system (ROPS)................................................................................................. 2-7 2.1.13. Attachment for protection against falling objects (FOPS) ................................................................. 2-8 2.1.14. Attachments...................................................................................................................................... 2-8 2.1.15. Battery .............................................................................................................................................. 2-9 2.2. Safety precautions during operation ....................................................................................................... 2-10 2.2.1.

Before you start the engine............................................................................................................. 2-10 Workplace safety ............................................................................................................................ 2-10 In the driver's cab ........................................................................................................................... 2-10 In-door operation ............................................................................................................................ 2-10 Gas, dust, and inflammable vapours ...............................................................................................2-11

2.2.2.

Mirrors, windows and lighting ..........................................................................................................2-11 Machine operation .......................................................................................................................... 2-12 Before you start the engine............................................................................................................. 2-12 Reversing........................................................................................................................................ 2-12 Driving............................................................................................................................................. 2-12 Driving on slopes ............................................................................................................................ 2-13 Emergency lowering system........................................................................................................... 2-14 Working close to power lines .......................................................................................................... 2-15 Loading ........................................................................................................................................... 2-16 Good vision..................................................................................................................................... 2-16 Working on snow ............................................................................................................................ 2-16 Height limitation .............................................................................................................................. 2-16 Brakes ............................................................................................................................................ 2-17 Working on loose soil...................................................................................................................... 2-17 Parking the machine ....................................................................................................................... 2-17 Driving with joystick steering (option) ............................................................................................. 2-18

2.2.3.

Transport ........................................................................................................................................ 2-19 Loading and unloading the machine............................................................................................... 2-19 Transport ........................................................................................................................................ 2-20

2.3. Precautions for maintenance.................................................................................................................... 2-21 2.3.1.

Personnel ....................................................................................................................................... 2-21

2.3.2.

Before carrying out maintenance.................................................................................................... 2-21

2.3.3.

During maintenance........................................................................................................................ 2-24

2.3.4.

Tyres............................................................................................................................................... 2-29

2.4. Safety labels ............................................................................................................................................... 2-31 Position of safety labels .................................................................................................................. 2-31

3. Operation..................................................................................................... 3-1 3.1. General view................................................................................................................................................. 3-2 3.1.1.

General view of the machine ............................................................................................................ 3-2

3.1.2.

Control elements and measuring instruments .................................................................................. 3-3

1-11

1.5. Table of contents

Introduction

Standard type ................................................................................................................................... 3-3 Multi-function control lever (if installed) ............................................................................................ 3-5 3.2. Description of the individual elements ...................................................................................................... 3-7 3.2.1.

Control monitor ................................................................................................................................. 3-7 Warning indicators ............................................................................................................................ 3-9

3.2.2.

Measuring instruments and control elements ................................................................................. 3-13 Switches ......................................................................................................................................... 3-18 Standard equipment ....................................................................................................................... 3-18 Multi-function control lever (if installed) .......................................................................................... 3-19

3.2.3.

Control levers and pedals ............................................................................................................... 3-30 Standard equipment ....................................................................................................................... 3-30 Multi-function control lever (if installed) .......................................................................................... 3-31

3.2.4. 3.2.5.

Steering column tilt lever ................................................................................................................ 3-37 Cap with lock .................................................................................................................................. 3-37 Hydraulic tank ................................................................................................................................. 3-37

3.2.6. 3.2.7.

Safety bar ....................................................................................................................................... 3-38 Towing pin ...................................................................................................................................... 3-38

3.2.8.

Grease pump .................................................................................................................................. 3-39

3.2.9. Backup alarm.................................................................................................................................. 3-39 3.2.10. Fuses .............................................................................................................................................. 3-39 Fuse capacity and circuit designations ........................................................................................... 3-40 3.2.11. Slow-blow fuses .............................................................................................................................. 3-42 3.2.12. Air conditioning ............................................................................................................................... 3-43 Layout and functions of the control panel ....................................................................................... 3-43 Operating instructions..................................................................................................................... 3-45 Cool box.......................................................................................................................................... 3-45 3.3. Operation .................................................................................................................................................... 3-46 3.3.1.

Pre-start checks .............................................................................................................................. 3-46 Walk-around check ......................................................................................................................... 3-46 Check before starting...................................................................................................................... 3-49 Adjustment before starting the operation........................................................................................ 3-55

3.3.2.

Operations and checks before starting the engine ......................................................................... 3-58 Starting the engine.......................................................................................................................... 3-60

3.3.3. 3.3.4.

Operation and checks after starting the engine .............................................................................. 3-62 Driving the machine ........................................................................................................................ 3-64 Driving the machine in road traffic using the steering wheel........................................................... 3-64 Driving the machine on site using the steering wheel..................................................................... 3-67 Driving the machine with joystick steering (option) on site ............................................................. 3-69

3.3.5.

Gear change ................................................................................................................................... 3-75 Gear selection................................................................................................................................. 3-75 Automatic gear change................................................................................................................... 3-75 Kickdown gear change ................................................................................................................... 3-76 Gear-change lock ........................................................................................................................... 3-77 Priority gear change........................................................................................................................ 3-77

3.3.6. 3.3.7.

1-12

Changing direction.......................................................................................................................... 3-78 Turning and steering....................................................................................................................... 3-79

Introduction

1.5. Table of contents

3.3.8.

Stopping the machine ..................................................................................................................... 3-79

3.3.9.

Operating the work equipment........................................................................................................ 3-81 Mono lever control .......................................................................................................................... 3-81 Two lever control............................................................................................................................. 3-82

Operating the work equipment (multi-function control lever) ........................................................................................................... 3-84 3.3.10. Wheel loader operations................................................................................................................. 3-85 Digging ........................................................................................................................................... 3-85 Levelling ......................................................................................................................................... 3-88 Pushing........................................................................................................................................... 3-88 Load-and-carry operations.............................................................................................................. 3-88 Loading ........................................................................................................................................... 3-89 3.3.11. Precautionary measures during operation...................................................................................... 3-91 Permissible water depth ................................................................................................................. 3-91 If wheel brake fails to work ............................................................................................................. 3-91 Precautionary measures when driving up or down......................................................................... 3-92 Precautionary measures during machine travel ............................................................................. 3-93 3.3.12. Adjusting the position of the work equipment ................................................................................. 3-94 Adjusting the boom kickout............................................................................................................. 3-94 Adjusting the bucket positioner....................................................................................................... 3-95 Bucket level indicator...................................................................................................................... 3-95 3.3.13. Parking the machine ....................................................................................................................... 3-96 3.3.14. Stopping the engine........................................................................................................................ 3-99 3.3.15. Check after stopping the engine ................................................................................................... 3-100 3.3.16. Locking ......................................................................................................................................... 3-100 3.3.17. Tyre handling ................................................................................................................................ 3-101 Precautionary measures when handling tyres.............................................................................. 3-101 Tyre pressure................................................................................................................................ 3-101 3.4. Transport .................................................................................................................................................. 3-103 3.4.1.

Loading, unloading ....................................................................................................................... 3-103

3.4.2.

Precautions for loading ................................................................................................................. 3-104

3.4.3.

Precautions during transport......................................................................................................... 3-104

3.5. Cold weather operation ........................................................................................................................... 3-105 3.5.1.

Precautions for low temperatures ................................................................................................ 3-105 Fuel and lubricants ....................................................................................................................... 3-105 Coolant ......................................................................................................................................... 3-105

3.5.2.

Battery .......................................................................................................................................... 3-106 Precautions after completion of work............................................................................................ 3-107

3.5.3.

After the cold weather period........................................................................................................ 3-107

3.6. Long-term storage ................................................................................................................................... 3-108 3.6.1.

Before storage .............................................................................................................................. 3-108

3.6.2. 3.6.3.

During storage .............................................................................................................................. 3-108 After storage ................................................................................................................................. 3-109

1-13

1.5. Table of contents

Introduction

4. Troubleshooting..........................................................................................4-1 4.1. When the machine runs out of fuel ............................................................................................................ 4-2 4.2. Central lubrication system .......................................................................................................................... 4-3 4.2.1.

No grease emerging at the lubrication points ................................................................................... 4-3

4.2.2.

The pump does not switch on........................................................................................................... 4-3

4.3. Towing the machine..................................................................................................................................... 4-4 4.3.1.

Engine can still be used.................................................................................................................... 4-6

4.3.2. 4.3.3.

Engine cannot be used ..................................................................................................................... 4-6 Releasing the parking brake ............................................................................................................. 4-7

4.3.4.

Emergency travel operation.............................................................................................................. 4-8

4.4. If battery is discharged.............................................................................................................................. 4-10 4.4.1.

Precautions for charging the battery............................................................................................... 4-11

4.4.2.

Starting the engine with a booster cable......................................................................................... 4-12

4.5. Other troubles ............................................................................................................................................ 4-14 4.5.1.

Electrical system............................................................................................................................. 4-14

4.5.2. 4.5.3.

Chassis ........................................................................................................................................... 4-15 Engine............................................................................................................................................. 4-18

5. Maintenance ................................................................................................5-1 5.1. Maintenance guide....................................................................................................................................... 5-2 5.2. Maintenance basics ..................................................................................................................................... 5-6 5.2.1.

Oil, fuel and coolant specifications ................................................................................................... 5-7 Oil ..................................................................................................................................................... 5-7 Fuel................................................................................................................................................... 5-8 Coolant ............................................................................................................................................. 5-9 Grease .............................................................................................................................................. 5-9 Storing oil and fuel ............................................................................................................................ 5-9 Filters .............................................................................................................................................. 5-10 Biodegradable hydraulic oil and lubricants ..................................................................................... 5-10

5.2.2.

Specifications of the electrical system ............................................................................................ 5-10

5.3. Wearing parts list ....................................................................................................................................... 5-11 5.4. Lubricants and operating means.............................................................................................................. 5-12 5.4.1.

Lubrication chart ............................................................................................................................ 5-12

5.4.2.

Lubricants, fuels and filling capacities ............................................................................................ 5-13

5.4.3.

Axle oils (AXO) ............................................................................................................................... 5-14

5.5. Tools and standard tightening torques (bolts, nuts).............................................................................. 5-15 5.5.1. 5.5.2.

1-14

Introduction of recommended tools ................................................................................................ 5-15 Torque list ....................................................................................................................................... 5-16

Introduction

1.5. Table of contents

5.6. Periodical replacement of safety-critical parts ....................................................................................... 5-17 5.7. Maintenance schedule chart..................................................................................................................... 5-18 5.8. Service procedure...................................................................................................................................... 5-21 5.8.1.

Initial 250 hours service .................................................................................................................. 5-21

5.8.2.

Maintenance upon demand ............................................................................................................ 5-21 Check, clean or replace air cleaner element .................................................................................. 5-21 Dust pre-extractor "Turbo II": check, clean ..................................................................................... 5-24 Cleaning the interior of the cooling system..................................................................................... 5-24 Checking the transmission oil level, adding oil ............................................................................... 5-28 Checking the axle oil level, adding oil............................................................................................. 5-29 Checking axle case breather .......................................................................................................... 5-30 Cleaning radiator fins...................................................................................................................... 5-31 Replacing the bolt-on cutting edge ................................................................................................. 5-32 Replacing the bucket teeth ............................................................................................................. 5-33 Checking the air-conditioning system ............................................................................................. 5-34 Cleaning the condenser of air conditioner ...................................................................................... 5-35 Checking the window washing-fluid level, adding fluid ................................................................... 5-35 Lubricating the work equipment control lever (2 points) ................................................................. 5-35 Draining water from the water separator (if installed) ..................................................................... 5-36

5.8.3.

Topping up the grease reservoir of the central lubrication system.................................................. 5-36 Checks before starting.................................................................................................................... 5-38 Checking the monitor panel ............................................................................................................ 5-38 Emergency steering system ........................................................................................................... 5-39 Checking the coolant level, adding coolant .................................................................................... 5-40 Checking the fuel level, adding fuel ................................................................................................ 5-41 Checking the oil level in engine oil pan, add oil .............................................................................. 5-42 Checking the electrical connections ............................................................................................... 5-43 Checking for water and sediment in water separator, draining water (if installed).......................... 5-43 Checking the parking brake function .............................................................................................. 5-44 Checking the operational brake function ........................................................................................ 5-45 Checking the sound of horn and backup buzzer ............................................................................ 5-45 Checking flashing of lamps, checking for dirt or damage ............................................................... 5-45 Checking engine exhaust colour and sound................................................................................... 5-45 Checking the gauge functions ........................................................................................................ 5-45 Checking steering wheel play, checking the steering function........................................................ 5-45

5.8.4.

Checking direction of rear view mirror, checking for dirt or damage............................................... 5-45 Every 50 hours service ................................................................................................................... 5-46 Checking the tyre inflation pressure ............................................................................................... 5-46

5.8.5.

Draining water and deposits from fuel tank .................................................................................... 5-46 Every 100 hours service ................................................................................................................. 5-47 Checking the oil level in the hydraulic tank, adding oil ................................................................... 5-47 Cleaning the inserts of the fresh air filter of the air-conditioning system ........................................ 5-48 Lubricating the rear axle pivot pin (3 points)................................................................................... 5-49

5.8.6.

Every 250 service hours ................................................................................................................. 5-50 Changing oil in the engine oil pan, replacing engine oil filter cartridge........................................... 5-50

1-15

1.5. Table of contents

Introduction

Checking and adjusting the fan belt and V-belt tension.................................................................. 5-52 Checking for loose wheel hub nuts, tightening the nuts ................................................................. 5-53 Cleaning the inserts of the recirculation filter of the airconditioning system ................................... 5-53 Checking and adjusting the compressor belt tension of the air-conditioning system ..................... 5-54 5.8.7.

Checking the battery electrolyte level ............................................................................................. 5-55 Every 500 service hours ................................................................................................................. 5-56 Replacing the fuel filter cartridge .................................................................................................... 5-56

5.8.8.

Replacing the transmission oil filter insert ...................................................................................... 5-57 Every 1000 service hours ............................................................................................................... 5-58 Changing the oil in the transmission case, cleaning the strainer .................................................... 5-58 Cleaning the transmission case breather ....................................................................................... 5-59 Lubrication ...................................................................................................................................... 5-60 Checking the tightening parts of the turbo-charger......................................................................... 5-62 Checking the play of the turbo-charger rotor .................................................................................. 5-62 Replacing the anti-corrosive filter cartridge .................................................................................... 5-62

5.8.9.

Checking the accumulator gas pressure ........................................................................................ 5-62 Every 2000 service hours ............................................................................................................... 5-63 Changing the oil in the hydraulic tank, replacing the hydraulic filter inserts ................................... 5-63 Replacing the hydraulic tank breather element .............................................................................. 5-65 Changing the axle oil ...................................................................................................................... 5-66 Checking the alternator starter motor ............................................................................................. 5-68 Checking and adjusting the valve clearance of the engine............................................................. 5-68 Checking the brake disc wear......................................................................................................... 5-68 Checking the shock absorber ......................................................................................................... 5-68 Replacing the element in the recirculating and fresh air filter of the air-conditioning system ......... 5-68 Cleaning and checking the turbo-charger....................................................................................... 5-68 Replacing the filter in the brake storage unit .................................................................................. 5-69

5.8.10. Every 4000 service hours ............................................................................................................... 5-70 Checking the water pump ............................................................................................................... 5-70

6. Technical data .............................................................................................6-1 6.1. Technical data .............................................................................................................................................. 6-2 6.2. Noise emission levels.................................................................................................................................. 6-3 6.3. Vibration level............................................................................................................................................... 6-3 6.4. Limit values for slopes ................................................................................................................................ 6-3

7. Special equipment and attachments.........................................................7-1 7.1. ALS-electronics............................................................................................................................................ 7-2 7.1.1.

Structure and functioning principle of the ALS-electronics ............................................................... 7-2

7.1.2.

Precautionary measures for switching on the ALS-electronics......................................................... 7-2

7.1.3.

Operating the als-electronics ............................................................................................................ 7-3

7.1.4.

Precautions when handling the accumulator .................................................................................... 7-3

1-16

Introduction

1.5. Table of contents

8. Index ............................................................................................................... 5

1-17

1.6. Dimensions, weights and operating data

1.6.

Introduction

Dimensions, weights and operating data

1.6.1. WA470-3: Dimensions, weights and operating data

d a c H

b G

f e

F GK100212

E D C

B A

Measurements, operating data

a b c d e f A B C D E F H

1-18

Bucket capacity to ISO 7546 Material density Bucket weight without teeth Static tipping load, straight Static tipping load, 40° angle Breakout force, hydraulic Lifting capacity, hydraulic, on ground Operating weight *) Reach at 45° discharge Dumping height at 45° discharge Lift height, hinge pin Height to upper edge of bucket Digging depth Bucket hight when travelling Overall length, bucket on ground Wheel base Bucket width Width over tyres Gauge Ground clearance Overall height

m³ t/m³ kg kg kg kN kN kg mm mm mm mm

4.2 1.8 2,107 18,310 16,090 181.2 243.3 23,367 1,276 3,000 4,220 5,880

4.35 1.75 2,186 18,219 15,992 182.5 246.7 23,447 1,266 3,005 4,220 5,844

4.6 1.6 2,228 18,119 15,898 171.9 243.4 23,487 1,326 2,938 4,220 5,914

4.75 1.55 2,308 18,125 15,895 176.1 243.1 13,567 1,301 2,963 4,220 5,910

425

8,594

8,584

8,669

8,634

3,400

mm mm mm mm mm

3,000 2,885 2,210 489 3,474

3,170 2,885 2,210 489 3,474

3,000 2,885 2,210 489 3,474

3,170 2,885 2,210 489 3,474

The standard buckets shown in the table can also be supplied with bolt-on cutting edges to increase capacities to 0,15 m³

Special buckets: 3,8 m³ rock bucket 4,1 m³ HD bucket 4,25 m³ HD bucket with bolt-on cutting edges 6,5 m³ bucket for light- weight materials

These figures refer to machines with 26.5 R25XHA tyres *) Machines without additional weights

Introduction

1.6. Dimensions, weights and operating data

1.6.2. WA470-3 Magnum: Dimensions, weights and operating data

d a c H

b G

f e

F GK100212

E D C

B A

Measurements, operating data

a b c d e f

A B C D E F H

Bucket capacity (heaped) Specific density Bucket weight without teeth Static tipping load, straight Static tipping load, 40° angle Breakout force, hydraulic Lifting capacity, hydraulic, on ground Operating weight Reach at 45° discharge Dumping height at 45° discharge Lift height, hinge pin Height to upper edge of bucket Digging depth Bucket hight when travelling Tip-Back angle when travelling Turning circle over edge of bucket Turning circle over tyres Overall length, with teeth Wheel base Bucket width Width across tyres Track width Ground clearance Overall height

m³ t/m³ kg kg kg kN kN kg mm mm mm mm mm mm ° mm mm mm mm mm mm mm mm mm

4.2 1.75 2130 17780 15470 180.5 229 23720 1290 3217 4422 6080 85 570 49 6856 6175 9013 3400 3000 2900 2210 475 3455

4.2 1.75 2140 17920 15590 197 232 23730 1210 3298 4422 6050 85 570 49 6900 6175 8898 3400 3170 2900 2210 475 3455

4.6 1.6 2200 17640 15340 168 227 23790 1360 3144 4422 6115 85 570 49 6885 6175 9115 3400 3000 2900 2210 475 3455

4.6 1.6 2270 17740 14520 183 230 23860 1280 3226 4422 6110 85 570 49 6929 6175 9000 3400 3170 2900 2210 475 3455

Special bucket: 6.0 m³ light material bucket The standard 4.2/4.6 m³ buckets shown in the table can also be supplied with bolt-on cutting edges to increase capacities to 4.35/4.75 m³

These figures refer to the machine fitted with 26.5-25 tyres Bucket type Standard Bucket Bulk-material bucket Standard bucket Bulk-material bucket Light-material bucket Dumping weight Not economical

Capacity in m³ 4.2 4.35 4.6 4.75 6.0 in (t/cm)

Material Earth Clay Sand Gravel Rock 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0

Recommended

Full utilization

Bucket contents % 100 - 115 110 - 120 100 - 110 85 - 100 75 - 100

Density t/ m³ 1.5 - 1.6 1.5 - 1.7 1.4 - 1.8 1.5 - 2.0 1.6 - 2.0

The actual volume will usally exceed the ISO/SAE classification. The table shows the optimum bucket for each type of material.

1-19

1.6. Dimensions, weights and operating data

Introduction

1.6.3. WA470-3 High-lift: Dimensions, weights and operating data

a c HIGH-LIFT

H G

f e

F GK100213

E D C

B A

Measurements, operating data

a b c e A B C D E F H

Bucket capacity to ISO 7546 Material density Bucket weight without teeth Static tipping load, straight Static tipping load, 40° angle Breakout force, hydraulic Lifting capacity, hydraulic, on ground Operating weight Reach at 45° discharge Dumping height at 45° discharge Lift height, hinge pin Digging depth Turning circle to bucket corners Overall length, bucket on ground Wheel base Bucket width Width across tyres Gauge Ground clearance Overall height

Bucket type HD Bucket Bucket Bucket Light-material bucket Material density Not economical

1-20

m³ t/m³ kg kg kg kN kN kg mm mm mm mm mm mm mm mm mm mm mm mm

4.2 1.6 2130 14720 13000 177.6 196 24570 1460 3650 4842 209 7102 9549 3400 3000 2900 2210 475 3455

4.2 1.6 2140 14820 13100 194 198.5 24580 1380 3730 4842 209 7140 9434 3400 3200 2900 2210 475 3455

3.6 1.8 2000 14860 13100 191 201 24400 1390 3720 4842 209 7070 9450 3400 3000 2900 2210 475 3455

3.6 1.8 2000 14990 13200 209 203 24400 1310 3800 4842 209 7110 9330 3400 3200 2900 2210 475 3455

These figures refer to machine with 26.5 R25 tyres

Machines without additional weights

Capacity in m³

Material

3.6 3.6 4.2 6.0 in (t/m³)

Earth Clay Sand Gravel Rock

0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0

Recommended

Full utilization

Bucket contents % 100 - 115 110 - 120 100 - 110 85 - 100 75 - 100

Density t/m³ 1.5 - 1.6 1.5 - 1.7 1.4 - 1.8 1.5 - 2.0 1.6 - 2.0

Introduction

1.7.

1.7. CE-conforming equipment

CE-conforming equipment

1.7.1. CE-conforming equipment - part 1 CE-conforming equipment

Bucket

–

Type

Part No.

Volume m³

Hydraulic pressure bar

Weight kg

WA470-3

421-70-H2010

4.00

210

421-70-H2020

4.00

210

421-70-H2030

4.40

210

421-70-H2040

4.40

210

421-70-H2050

4.00

210

421-70-H2060

4.00

210

421-70-H2070

4.00

210

421-70-H2080

4.40

210

421-70-H2090

4.40

210

421-70-H2100

4.00

210

421-70-H2B20

6.00

210

421-70-H2B40

4.00

210

421-70-H2B50

4.00

210

421-70-H2B60

3.80

210

421-70-H2B70

3.80

210

GK100392

1-21

1.7. CE-conforming equipment

Introduction

1.7.2. CE-conforming equipment - part 2 CE-conforming equipment

Bucket

–

Type

Part No.

Volume m³

Hydraulic pressure bar

Weight kg

421-70-H2D10

4.20

210

421-70-H2D20

4.20

210

421-70-H2D30

4.60

210

421-70-H2D40

4.60

210

421-70-H2K50

4.20

210

421-70-H2K60

4.20

210

421-70-H2K70

4.60

210

421-70-H2K80

4.60

210

421-70-H2E50

4.20

210

421-70-H2E60

4.20

210

421-70-H2E70

4.60

210

421-70-H2E80

4.60

210

421-70-H2E90

4.35

210

421-70-H2F90

4.75

210

421-70-H2G70

4.35

210

421-70-H2G80

4.75

210

WA470-3

GK100392

1-22

Introduction

1.7. CE-conforming equipment

1.7.3. CE-conforming equipment - part 3 Apart from the equipment manufactured by Komatsu Hanomag, the following equipment from other manufacturers may be used (max. hydraulic pressure: 210 bar): CE-conforming equipment

Bucket

–

Type

Part No.

Volume m³

Hydraulic pressure bar

Weight kg

WH-110.40-310-ND

3.30

210

GL 512

4.00

210

40 429

4.40

210

PE618

4.40

210

H0 500 701

4.66

210

40 087

5.00

210

WL.140.40.340

5.41

210

7 967

5.80

210

WA470-3

1-23

1.7. CE-conforming equipment

Introduction

1.7.4. Manufacturer-supplied CE-conforming equipment, according to document 419-93-H1160

1 B1 C1 D1

Y2 X2

(48)

X1 Y1

(39)

A1 d1=d2

b2 b1 GK100395

1-24

Introduction

1.7. CE-conforming equipment

Manufacturer-supplied CE-conforming equipment, according to document 419-93-H1160 The responsibility for observing valid regulations in the case of wheel loaders with "interchangeable equipment" (e.g. bucket or fork-lift) which was not supplied from works lies with the customer which was subsequently fitted to the machine. The directives for CE conformity and road-traffic registration are deemed to have been fulfilled when the manufacturer of the equipment confirms fulfilment of the form 419-93-H1160 alongside.

WA470-3

419-93-H1160

2100

1345

813

2055

2173

1668

The certification must be sent to the customer and the wheel loader manufacturer. The CE conformity declaration for a specific wheel loader is only legally valid once this has taken place.

1780

534

The dimensions X1, X2, Y1 and Y2 must be provided by the customer for approval for use on public roads. (valid in Germany)

1768

9465

1610

The figure G (in kg) represents the maximum load (equipment and operating load) which may act upon this point.

1610

270

A1 A2 Sh B1 B2 C1 C2 D1 D2 G H1

–

1038

122

143

447.5

400

240

Driver’s eye

Vision line

Bolts

Tyres

MICHELIN 26.5R25 XHA

Bucket

4.2 m³ 421-70-H2K62 3748C42

The dimension Sh (smallest tyre radius) must be added to the dimension D2.

H2 J X1 X2 Y1 Y2 b1 b2 b3 b4 c d1 d2 e h l

Distance: bucket pivoting point - front axle, horizontal Distance: bucket pivoting point - front axle, vertical Distance: road level - front axle Distance: driver's eye (1) - front axle, horizontal Distance: driver's eye (1) - front axle, vertical Distance: centre steering wheel - centre front axle, horizontal Distance: center steering wheel - centre front axle, horizontal Distance: headlight - centre front axle, horizontal Distance: headlight - centre front axle, vertical Weight of equipment and working load Distance: bucket pivoting point - bucket upper edge, vertical (carrying position) Distance: bucket pivoting point - vision line, vertical (carrying position) Distance: road level - bucket bottom edge (carrying position) Distance: cutter protection - front axle, horizontal Distance: cutter protection - road level, vertical Distance: teeth protection - front axle, horizontal Distance: teeth protection - road level, vertical Bucket connection dimension, boom width inside Bucket connection dimension, boom arm Bucket connection dimension, tilt rod Bucket connection dimension, temporary size Bucket connection dimension between d1 and d2, vertical Bucket connection dimension, bolt (3) for boom Bucket connection dimension, bolt (3) for tilt rod Bucket connection dimension d1 - d2, horizontally displaced Distance: bucket bottom edge - boom bolt hole Distance: centre of bolt -- centre of fastening screw

1-25

1.7. CE-conforming equipment

Introduction

1.7.5. Manufacturer-supplied CE-conforming equipment, according to document 419-93-H1160

1 B1 C1 D1

Y2 X2

(48)

X1 Y1

(39)

A1 d1=d2

b2 b1 GK100395

1-26

Introduction

1.7. CE-conforming equipment

WA470-3 MAGNUM

419-93-H1160

2275

1345

The directives for CE conformity and road-traffic registration are deemed to have been fulfilled when the manufacturer of the equipment confirms fulfilment of the form 419-93-H1160 alongside.

813

2055

2173

The certification must be sent to the customer and the wheel loader manufacturer. The CE conformity declaration for a specific wheel loader is only legally valid once this has taken place.

1668

1780

The dimensions X1, X2, Y1 and Y2 must be provided by the customer for approval for use on public roads. (valid in Germany)

534

1768

The dimension Sh (smallest tyre radius) must be added to the dimension D2.

9540

1610

270

–

1038

122

143

447.5

400

240

Driver’s eye

Vision line

Bolts

tyres

MICHELIN 26.5R25 XHA

bucket

4.2 m³ 421-70-H2K62 3748C42

The figure G (in kg) represents the maximum load (equipment and operating load) which may act upon this point. A1 A2 Sh B1 B2 C1 C2 D1 D2 G H1 H2 J X1 X2 Y1 Y2 b1 b2 b3 b4 c d1 d2 e h l

1-27

1.8. Loading and securing

1.8.

Introduction

Loading and securing

Observe all safety instructions carefully in order to prevent accidents with severe injury.

GK100214

DANGER ●

Always secure articulated joint if maintenance or repair work is to be carried out or if the machine is going to be lifted or transported.

●

An articulated joint may jack-knife unexpectedly if not secured. Danger of injury if joint jack-knifes.

Position machine as if driving in forward direction and secure articulated joint against jack-knifing, using the articulated-joint lock. Always secure securing bar in either position using bolt and spring pin. Position 1 Position 2

Articulated steering locked Articulated steering unlocked

NOTE ●

●

Remove the rear wheel covers before transporting the machine by crane. Due to safety reasons and to avoid consequential damages, it is prohibited to attach other points (such as axles, cardan shafts, articulated joint, bucket teeth) than those specified for lifting and securing. It is also prohibited to attach ropes etc. to the driver's cabin.

1-28

GK100203

Safety

2. Safety

DANGER Failure to adhere to these safety instructions can lead to accidents with serious injuries! Read and adhere to all safety instructions.

This chapter also contains safety instructions for special equipment and attachments.

2-1

2.1. General safety measures

2.1.

Safety

General safety measures

2.1.1. Safety instructions ●

Do not operate or service the machine unless you have been trained and are authorised to do so.

●

Always adhere to all instructions, measures, and safety instructions when operating or servicing the machine.

●

When working together with other persons, agree beforehand on all hand signals that you want to use to avoid accidents due to misunderstandings.

2.1.2. Safety devices ●

Check that all safety devices and covers of the machine are correctly installed.

●

Ensure that damaged safety devices and covers are repaired before you start the machine.

●

Use all safety devices as prescribed, e.g. the safety lever for the work hydraulic system (see opposite figure) and the safety belt. Do not remove any of the safety devices. Safety devices must be kept in perfect condition.

GK100215

2.1.3. Emergency exit In an emergency situation, you can use the window on the righthand side of the driver's cab (seen from the driving direction) as an emergency exit. For this purpose, push down the window.

2.1.4. Clothing and personal protection ●

Do not wear loose-fitting clothing, jewellery, or open long hair. There is danger that you get caught by control elements or moving parts, leading to serious injuries.

●

Immediately replace clothing stained with highly inflammable substances.

●

When operating and servicing the machine, wear the appropriate protective equipment, e.g. safety helmet, safety goggles, safety shoes, dust protection mask, and safety gloves.

●

Always wear safety goggles, safety helmet, and protective clothing, if it is likely that chippings or splinters will be produced while operating the machine (e.g. when removing or driving in bolts or cleaning with compressed air).

●

Ensure that no unauthorised person is within the danger zone.

2-2

A0055010

Safety

2.1. General safety measures

2.1.5. Machine modifications ●

Komatsu Hanomag will not be liable for modifications performed without prior expressed consent by the manufacturer.

●

Komatsu Hanomag will not be liable for any injuries or damage resulting from unapproved modifications.

2.1.6. Before you leave the driver's seat 1. Lower the work unit onto the ground. 2. Use the safety lever to secure the work hydraulic system against unintentional operation (lever position '1'). If the lever for the hydraulic system is not secured and accidentally touched, uncontrolled movements of the work unit may lead to accidents with injuries or damage. 3. Switch off the engine. 4. Remove the ignition key before you leave the driver's seat. Store the ignition key in a safe place.

GK100215

5. Close the cabin door.

2.1.7. Mounting and dismounting ●

Do not jump on or off the machine. Do not mount on or dismount from a moving machine.

●

Always use the handle bars and tread steps for mounting or dismounting the machine. Do not hold onto the control levers while mounting and dismounting.

●

To ensure safe hold, hold the handle bar with one hand and stand on the tread steps with both feet. Optionally, stand on the tread steps with one foot and hold the handle bars with both hands.

●

GK100217

To reach the left rear mudguard for checking of the coolant level, set one foot into the driver's cab and use it as the fourth step.

GK100216

2-3

2.1. General safety measures

Safety

2.1.8. Fire prevention and fire fighting ●

Fuel, oil, and antifreezing compound are highly inflammable and could cause a fire.

●

Do not approach inflammable material with naked light.

●

Prior to refuelling, switch off the engine and stop smoking.

●

Refuelling and refilling of oil are to be performed in sufficiently ventilated places.

●

Store oil and fuel in special places appropriate for this purpose. Ensure that unauthorised persons do not have access to these places.

●

Tightly close all cover caps.

●

Check the fuel system, the lubrication system, and the hydraulic system for leaks. Have leaks repaired. Remove any excess oil, fuel, or other inflammable substances.

●

Carefully and completely remove wooden chippings, leaves, paper, and other highly inflammable materials that may have collected in the engine compartment, since they could cause a fire.

●

2-4

Do not operate the machine in the vicinity of naked light.

A0055030

Safety

2.1. General safety measures

Fire extinguisher and first-aid kit ●

A fully operational fire extinguisher must be available at hand.

●

The fire extinguisher is located in the compartment under the driver's seat.

●

If, in the course of certain operations, there is danger of fire, fire extinguishers must be at hand. Familiarise with the use of the fire extinguishers. The fire extinguisher is located in the compartment under the driver's seat.

●

Inform yourself on measures to be taken in the event of a fire.

●

The first-aid kit is located in the compartment under the driver's seat next to the fire extinguisher.

●

Make sure that you know all telephone numbers of the persons that you need to contact in an emergency.

2-5

2.1. General safety measures

2.1.9. Protection against asbestos dust Asbestos dust is a health hazard if breathed in. This machine is free of any parts containing asbestos. When handling material that may contain asbestos fibres, strictly adhere to all legal instructions and regulations. Furthermore, adhere to the following protective measures for your own protection: â&#x2014;?

Work, if possible, with a following wind.

â&#x2014;?

While working, wear an approved dust protection mask.

â&#x2014;?

After work, clean the machine with water to minimise formation of dust. Do not use compressed air for cleaning.

2.1.10. Protection against injuries Do not insert any part of your body in the operating range of moving parts, such as work unit and cylinder, or machine and work unit. Never stand in a dangerous area. Distances vary when the work unit or steering are operated, this may lead to serious injuries.

2-6

Safety

2.1. General safety measures

2.1.11. Working at high temperatures ●

Directly after operating the machine, the engine coolant, the engine oil, and the hydraulic oil are extremely hot and under pressure. Do not try to unscrew caps, drain water or oil, or replace filters directly after operating the machine, since this may lead to severe burns due to hot fluids or hot machine parts. Wait until the temperature has fallen. Strictly adhere to the described procedures when performing the required measures.

●

Lower the work equipment.

●

Switch off the engine and wait for the radiator to cool down before you unscrew the radiator cap. Slowly turn the radiator cap until it reaches the first catch to let the pressure escape. Then, proceed turning the cap further and remove it. If you do not let the pressure escape, boiling water may spurt out when you remove the radiator cap.

●

Switch off the engine. Allow the hydraulic oil to cool down before you unscrew the cap of the hydraulic tank to drain the hydraulic oil. Slowly turn the cap of the hydraulic tank to let the pressure escape from the tank. If you do not let the pressure escape, oil may spurt out when you remove the cap of the hydraulic tank.

2.1.12. Roll-over protection system (ROPS) ●

The roll-over protection system (ROPS) protects the operator and absorbs load and impact energy, if the machine should roll over.

●

The ROPS is a fixed component of the cab. The machine must not be operated without this roll-over protection system.

●

The ROPS meets the regulations of all member states of the EU. If, however, the ROPS is modified, damaged, or repaired without permission, its stability is impaired. In this case, the ROPS must be replaced, since its correct function can no longer be guaranteed.

●

The ROPS can only provide maximum protection, if the driver wears the safety belt correctly. For this reason, the safety belt is to be worn when the machine is in operation.

2-7

2.1. General safety measures

2.1.13. Attachment for protection against falling objects (FOPS) NOTE FOPS is a fixed component of the cab. When you work on a site where there is danger of falling rocks or other objects, the machines must be equipped with a FOPS. If the FOPS is modified without permission or damaged, its stability is impaired. In this case, the FOPS must be replaced, since its correct function can no longer be guaranteed.

2.1.14. Attachments ●

Prior to assembly and operation of an additional attachment, read the attachment's manual and strictly adhere to the instructions on assembly and operation.

●

Do not use attachments that have not been approved of by Komatsu Hanomag or the responsible Komatsu dealer. If you use attachments which have not been approved of, safety, correct operation, and service life of the machine may be impaired.

●

Komatsu Hanomag are not liable for injuries, accidents, and damage resulting from the use of attachments that have not been approved.

2-8

Safety

2.1. General safety measures

2.1.15. Battery The batteries are filled with sulphuric acid (battery acid). ●

Always wear safety goggles when handling batteries.

●

Contact of battery acid with eyes can cause blindness. If acid should get into your eyes, immediately rinse your eyes with ample water and call for medical help. Rinse your eyes with water until a doctor arrives or you are able to visit an ophthalmologist or go to a hospital.

●

Sulphuric acid that gets into contact with skin or clothing may cause acid burns. Immediately rinse the area that has come into contact with the acid with ample water.

●

When working in the area of the battery, your hands may unintentionally get in touch with acid. For this reason, do not touch your eyes while working in the area of the battery. Always wash your hands after work.

●

Batteries produce detonating gas. Detonating gas is extremely explosive and may be ignited even by the smallest spark.

●

Do not disconnect the battery while the engine is still running.

●

Prior to start of work on batteries, set the start switch to '0'. Set the main switch of the battery (if installed) to 'Off'.

●

Avoid any short-circuits via the poles or the pole terminals of the battery due to unintentional touching with metal objects, such as tools.

●

When removing or inserting the battery, note which of the poles is the positive (+) and which is the negative (-) one. Always disconnect the mass cable first and reconnect it last.

●

Tightly fasten the pole terminals. Loose pole terminals may produce sparks and thus cause explosions. Ensure that the cover of the positive pole (+) is always mounted.

●

Tighten the cover caps.

●

When repairing the electrical system or performing electric welding, disconnect the negative (-) pole terminal from the battery to interrupt the electric circuit.

2-9

2.2. Safety precautions during operation

2.2.

Safety

Safety precautions during operation

2.2.1. Before you start the engine Workplace safety ●

Before you start operation, check the working area for dangerous working conditions.

●

Inspect the surface of the soil in the working area and determine the optimum and safest procedure.

●

Determine the required safety measures against dangers on public roads in co-operation with the owners, users, and responsible authorities.

●

On sites where there are underground water pipes, gas pipes, or conduits for high voltage cables, contact the responsible supply company to determine the lines' positions. Ensure that these facilities will not be damaged.

●

AE060770

When working with water or crossing sand banks, first check the subsoil and depth and flow rate of the water. Ensure that the permitted water depth will not be exceeded.

In the driver's cab ●

Do not leave any tools or spare parts lying around in the cab. These may actuate, damage, or block control levers, pedals, or switches. Store these parts in the tool box.

●

Keep the cab floor, the control elements, the tread steps, and the handrails free of oil, grease, and excessive dirt.

●

Immediately repair any damage. Tighten loose screw connections.

●

Check the safety belt, the belt buckle, and the fastening elements for damage and wear. Replace worn or damaged parts.

In-door operation Do not operate machines in-door unless these areas are sufficiently ventilated (e.g. workshops). CAUTION Danger of intoxication!

2-10

GK100218

Safety

2.2. Safety precautions during operation

Gas, dust, and inflammable vapours Do not operate combustion engines in an environment that may contain inflammable gases or vapours. These gases, dusts, or vapours may ignite or be sucked in by the suction system, thus causing a rise in engine speed or an exceeding of the engine's maximum rpm. This may lead to a fire, an explosion, and major damage to property. It may also happen that the engine cannot be switched off anymore. Also refer to section "In-door operation" on page 2-10.

Mirrors, windows and lighting ●

Clean the windows and the headlights to ensure maximum sight.

●

Adjust the rear-view mirror in such a way that you have an excellent view of the rear from the driver's seat. Keep the mirrors clean.

●

Ensure that the complete lighting system operates properly and that it is correctly adjusted.

●

Immediately replace broken window panes by new ones.

2-11

2.2. Safety precautions during operation

Safety

2.2.2. Machine operation Before you start the engine ●

Walk around the machine to check whether persons or objects are in the way before you get on the machine.

●

Do not start the engine, if a warning sign has been attached to the control lever or another point.

●

Sound the horn just before you start the engine.

●

Start and operate the machine only from the driver's seat.

●

Apart from the operator, no other person is permitted in the driver's cab or the vicinity of the machine.

●

If the machine is provided with a reversing warning system, you must ensure that it operates correctly.

●

Before you start the machine, check that the articulated steering is unlocked (position '2') and that the locking bar is attached to the frame by means of bolts and spring bolts.

●

Always wear the safety belt when operating the machine.

1 GK100203

Reversing These rules must be observed for all machines, i.e. also for those machines equipped with a reversing warning system: ●

Check that there is nobody near the machine or in the way.

●

Before you start reversing, sound the horn to warn persons within or near the operating area.

●

When working in potentially dangerous areas or areas with obstructed view, ask another person to regulate and supervise traffic.

Driving ●

When driving, set the bucket to the transport position. The bucket is in its transport position when the transport position markings on frame and boom are aligned.

●

When driving on uneven ground, drive slowly and avoid sudden steering movements.

●

If the engine stops while you are driving, steering of the machine is impossible. The emergency steering system is only operational while the machine is being towed. GK100204

2-12

Safety

2.2. Safety precautions during operation

Driving on slopes ●

Keep sufficient distance to ridges and steep slopes. There is danger of the machine tipping over or sliding down on steep slopes, embankments, or hill flanks. The limiting values are defined in chapter "Limiting Values for Slopes".

●

To keep the centre of gravity as low as possible when driving on slopes, embankments, and hill flanks, you must set the bucket to a position just above the ground (approx. 200 to 300 mm). In an emergency, quickly lower the bucket to the ground to stabilise the machine.

●

Do not turn on a slope or drive across a slope. Turn or cross the section only level ground.

●

When driving on slopes, avoid driving on grass, fallen leaves, or steel plates. Driving sideways on these surfaces may result in the machine sliding. Drive very slowly and carefully.

●

When driving down a slope, use the braking power of the engine and drive slowly.

●

If the engine stops while you are driving on a slope, immediately apply the service brake to stop the machine. Then apply the parking brake. Lower the work unit.

●

When driving on a hill with a load, drive

AE060800

AE060810

❍

uphill: in forward direction

❍

downhill: in reverse direction

2-13

2.2. Safety precautions during operation

Safety

Emergency lowering system If the engine is not running you can lower the work equipment with the PPC-lever. Press the lever slowly into position "S".

GK100275

GK100276

2-14

Safety

2.2. Safety precautions during operation

Working close to power lines ●

A voltage overspill may occur, if you or the machine get too close to power lines. For this reason, always heed the required safety distance between the machine and the power lines. Nominal Voltage

Safety Distance

up to 1000 V

1 kV

up to 110 kV

over 110 kV

up to 220 kV

over 220 kV

up to 380 kV

over

with unknown nominal voltage

A0060820

●

The safety distances given here reflect the German safety standards. You can find the safety distances applying to your country in the relevant national regulations.

●

Before you start work, obtain information about line voltages from your supply company.

●

When estimating the distance, take into account all possible movements of the machine, the work unit, and the line. An uneven surface may result in the machine swaying, or wind may move the lines, etc.

●

Should the work unit come into contact with a power line, proceed as follows:

1. Do not leave the driver's cab. The driver's cab is a "Faraday cage" protecting you from electric shock. 2. Warn other persons and tell them to stay far away from both the power line and your machine. 3. Try to move the machine out of the range of influence of the power line by moving it away from the line, moving away the work unit, etc. 4. Have the power in the line switched off.

2-15

2.2. Safety precautions during operation

Loading ●

Proceed as follows to fill embankments, to backfill ditches, or to deposit earth over the edge of a hill: 1. First, dump a heap of earth in front of the hill. 2. Fill the bucket with earth again and drive the machine into the heap of earth. Dump the bucket contents behind the first heap of earth.

●

The load is relieved very suddenly when the heap of earth is pushed over the edge of the hill or when the machine reaches the edge of the hill. If this happens, the driving speed may suddenly increase. For this reason, drive particularly slowly and carefully at these points.

●

If possible, perform all load operations with a following wind to protect yourself against dust and impaired vision.

●

Avoid sudden starts, turns, or stops when the bucket is full.

Good vision ●

When working in dark areas, switch on the working lights of the machine and provide additional lighting for the working area.

●

If vision is impaired, e.g. due to mist, snow, or rain, interrupt work and wait until vision has improved to such an extent that safe work is ensured again.

Working on snow ●

When working on snow or ice-covered surfaces, there is danger of the machine starting to skid even at a very flat angle. For this reason, drive slowly and avoid sudden starts, turns, or stops.

●

Very often snow hides the edges of roads and other objects. For this reason, proceed very carefully when removing snow.

●

When driving on hill flanks covered with snow do not brake abruptly to stop the machine. To stop the machine, lower the bucket onto the ground.

●

The load may vary considerably, depending on the structure of the snow. For this reason, reduce the load and pay attention that the machine does not start to skid.

Height limitation When working in areas with height limitations, e.g. in tunnels, beneath bridges or power transmission lines, or in garages, pay attention that the work unit does not touch or damage these facilities.

2-16

Safety

2.2. Safety precautions during operation

Brakes ●

Use the brake pedal only for braking, do not use the brake pedal as a foot rest.

●

Do not step repeatedly onto the brake pedal, unless it is absolutely necessary.

●

When driving downhill, use the engine as a brake and use the brake pedal, if necessary.

Working on loose soil ●

Do not drive the machine too close to edges of hills, overhangs, and deep ditches.

●

If the soil starts to sag at these locations, the machine may tip over, fall down, or roll over, thus injuring you severely.

●

Take into account that the soil is wet and soft after heavy rainfall, or very loose after blasting.

Parking the machine ●

If possible, park the machine on an even surface. If you have to park the machine on a slope, you must park the machine with the work unit pointing down the slope. Lower the work unit until it firmly touches the ground (1), or let the cutting edge of the bucket sink deeply into the soil. Block the wheels with wheel chocks (2) to ensure that the machine cannot roll away.

●

When parking the machine on public roads, ensure that it does not obstruct traffic. Put up signal lamps and required warning signs to ensure that passing traffic can clearly see the machine.

●

Adhere to all regulations on parking vehicles and securing building sites.

●

Before you leave the machine, completely lower the work unit onto the ground. Secure the control lever of the work hydraulic system against accidental operation. Switch off the motor. Lock all points that can be locked and store the key in a safe place.

GK100086

2-17

2.2. Safety precautions during operation

Safety

Driving with joystick steering (option) ●

Joystick steering is not permitted for road traffic. The conventional wheel steering must be used for road traffic. The joystick steering may only be used on site.

●

The permitted maximum speed is 20 km per hour (kph) if joystick steering is being used. The 20 kph speed restrictor must be switched on before switching on joystick steering.

●

The travel direction lever on the steering wheel must be set to neutral when using joystick steering. Joystick steering is switched off automatically when the travel direction lever on the steering wheel is activated and the steering wheel has to be used for steering.

●

If switched on, joystick steering has priority over steering wheel steering, i.e. if you use the steering wheel and the joystick at the same time, the steering reacts to the joystick.

●

Please read the description in chapter "Driving the machine with joystick steering (option) on site" on page 3-69 carefully before pulling away with the joystick switched on and make sure that you adhere the instructions completely.

1 N 2 AE061330

2-18

Safety

2.2. Safety precautions during operation

2.2.3. Transport Loading and unloading the machine Loading and unloading is potentially dangerous. For this reason, proceed with extreme care. ●

Load and unload the machine only on solid and level ground. Keep a safety distance to the edge of the road.

●

Block the wheels of the transport vehicle (1) and place support blocks (2) under both ramps before driving the machine onto the transport vehicle.

●

Only use ramps (3) with appropriate carrying capacities and widths. The ramps must be long enough to ensure that the maximum loading gradient (4) of 15% is not exceeded.

●

Ensure that the ramps are positioned and fastened safely and that both sides have the same height. Set the distance between the ramps to the distance between the wheel tracks (5).

●

Ensure that the surfaces of the ramps are clean and free of grease, oil, ice, and loose material. Remove any dirt adhering to the wheels.

●

When loading and unloading the machine, keep the engine speed low and drive slowly.

●

Do not carry out steering movements on the ramps. If required, drive off the ramps again, correct alignment of the machine, and drive up again.

●

After loading, i.e. when the machine is on the transport vehicle, apply the parking brake.

●

Block the wheels of the machine with wheel chocks.

●

Set the steering wheel of the machine to straight driving.

●

Secure the articulated steering with the locking bar. Position 1 Position 2

Max. 15°

GK100205

Articulated steering locked Articulated steering unlocked 2

Always secure the locking bar with the bolt and the spring bolt in both positions. ●

Secure the machine on the transport vehicle by means of appropriate fastening equipment. Only use the attachment points on the machine for lifting and securing. For safety reasons, do not use any other points for fastening (e.g. axle, cardan shaft, articulated steering, bucket teeth, or strapping around the cab).

1 GK100203

2-19

2.2. Safety precautions during operation

Transport â&#x2014;?

When moving the machine on a transport vehicle, adhere to all applicable motor vehicle traffic regulations.

â&#x2014;?

Determine the transport route, taking into account the width, length, height, and weight of the load and, if necessary, have this approved by the responsible authorities.

2-20

Safety

2.3.

2.3. Precautions for maintenance

Precautions for maintenance

2.3.1. Personnel Do not service or repair the machine unless you are an appropriately qualified technician or have been appropriately instructed by a qualified technician.

GK100219

2.3.2. Before carrying out maintenance Warning sign While the machine is being serviced, the engine must not be started and the control elements must not be actuated without prior agreement, since this could cause accidents with serious injury. Always attach the warning sign to the control lever for the work hydraulic system to warn other persons that work is being performed on the machine. If required, put up additional warning signs around the machine.

DANGER DO NOT operate When this plate is not being used, keep it in the storage compartment 09963-03000

You may purchase these warning signs from your Komatsu dealer.

GK100220

Tools Only use tools which are suitable for the task you want to carry out. If you use damaged or makeshift tools or tools which are of inferior quality, injuries may occur.

2-21

2.3. Precautions for maintenance

Safety

Safety-related parts The quality of these parts is subject to normal wear and tear. For this reason, replace safety-related parts by new ones at regular intervals, regardless of whether they are defective or not. Safety-related parts are: ●

●

Fuel system: ❍

fuel hose,

❍

overflow hose,

❍

tank cap

Hydraulic system: ❍

pump outlet hose,

❍

ront and rear pump branch hoses

Immediately replace defective parts, even if the interval for replacement has not elapsed. Replace hydraulic hoses every 6 years. Prior to start of inspection and maintenance Prior to start of inspection and maintenance operations, park the machine on solid, even ground. Lower the work unit. Switch off the engine and safeguard the machine.

OFF ON

If the engine has to be running during maintenance, e.g. for pressure checks of the hydraulic system, proceed with particular care. Carry out such measures with two persons with whom you have arranged clear hand signs beforehand.

START

One person must be seated on the driver's seat to ensure that the engine can be immediately switched off, if required. This person must always ask the second person before actuating the control levers.

GK100206

The person performing the maintenance measures must take care not to touch or get caught by moving parts. Securing the articulated steering Before starting maintenance, secure the articulated steering against accidental movement using the locking bar (position '1').

1 GK100203

2-22

Safety

2.3. Precautions for maintenance

Securing the working attachment The working attachment must be secured against moving if any work is to be carried out under it when it is in a raised position. For this purpose you should use either a supporting prop (1) which is to be positioned below the lifting arms, or support braces (2) which are mounted around the piston rods. The support braces are available as optional extras. WA470-3 Standard Boom

P/N 421-98-H0030

WA470-3 High Lift Boom

P/N 421-98-H0220

WA470-3 MAGNUM Boom

P/N 421-98-H0210

AE418280

NOTE Please note: 2 support braces are necessary for every machine; one for the left-hand lifting ram and one for the right-hand lifting ram. When using the support braces the following procedure is to be adhered to at all times: 1. Park the machine on level, solid ground. 2. Apply the parking brake. 3. Place wheel chocks in front of the wheels to prevent the machine from inadvertently rolling away. 4. Lift the arm far enough to allow the support braces (2) to be placed on the lifting ramâ&#x20AC;&#x2122;s piston rods. 5. Switch the engine off. 6. Mount the support braces on the piston rods without standing under the lifting arm, use a stepladder and tighten the screws (3) with your fingers. 7. With the engine switched off, lower the arm slowly until it rests on the supports.

8. Move the control lever (4) to the â&#x20AC;&#x153;NEUTRALâ&#x20AC;? position and secure it by means of the locking lever. Position 1 Position 2

Work hydraulic system locked Work hydraulic system unlocked

4 GK100223

GK100215

2-23

2.3. Precautions for maintenance

2.3.3. During maintenance Attachments Attachments removed from the machine must be put down in a safe location in such a way that they cannot tip over. CAUTION Risk of injury!

Working under the machine ●

Always lower all movable work units onto the ground or set them to their lowest positions before you start to perform maintenance or repair measures under the machine.

●

Block the wheels of the machine using wheel chocks.

●

Do not work under a machine that is not appropriately supported.

Keeping the machine clean ●

Always keep the machine clean and tidy.

●

Oil, grease, and tools lying around involve danger, since they may cause slipping or tripping over.

●

Do not clean sensors, plugs, and the interior of the driver's cab with water or steam. If water seeps into the electric system, there is danger of uncontrolled and unintentional movement of the machine which may cause accidents.

Specific measures Always wear appropriate safety clothes and safety goggles when you perform grinding, welding, use a sledge hammer or carry out similar work.

2-24

Safety

2.3. Precautions for maintenance

Refuelling and topping up of oil ●

Spilled fuel or oil involves danger of slipping and fire. For this reason, immediately remove any spilled liquid.

●

Always refuel and top up oil in a place that is sufficiently ventilated.

●

After refuelling and topping up, close the filling openings with cover caps.

●

Do not use fuel for rinsing or cleaning of components.

●

Ensure that neither oil nor fuel can seep into the soil or water. Dispose of used substances according to the relevant environmental regulations.

●

If the machine is provided with a fuel sieve in the tank opening, do not remove this fuel sieve before you start refuelling.

A0055030

Coolant ●

Caution, antifreeze is highly inflammable.

●

To check the coolant level, first switch off the engine and wait for the cooling system to cool down. Then, check the coolant level in the expansion tank.

●

Slowly unscrew the cap to let the pressure escape.

●

If required, top up water in the expansion tank.

2-25

2.3. Precautions for maintenance

Use of lighting Always use explosion-proof lighting when checking fuel, oil, coolant, or battery acid.

High-pressure hoses Neither bend high-pressure hoses nor hit them with hard objects. Do not use piping or hoses with fissures, cracks, or bends, since they may burst during operation. Immediately replace any loose or damaged fuel or oil hoses. Leaking fuel or oil involves danger of fire and slipping. Replace all hoses every six years at the latest.

Handling high-pressure oil ●

Always take into account that the hydraulic lines are subjected to high pressure.

●

Do not top up oil, drain oil, or perform maintenance or inspection measures unless the work unit is completely lowered and the system is depressurised.

●

If oil comes out under high pressure, this involves danger of an oil jet penetrating the skin or getting into the eyes. For this reason, always wear safety goggles and thick safety gloves, and use a piece of cardboard or wood when checking for oil leaks.

●

If you have been hit by an oil jet, immediately go and see a doctor and explain what has happened.

2-26

Safety

2.3. Precautions for maintenance

Handling of pressure accumulators

WARNING Danger of injury! Pressure accumulators are filled with highly pressurised nitrogen. Do not open or damage pressure accumulators.

●

Immediately inform your Komatsu dealer, if you detect malfunctions or defects of pressure accumulators.

●

Filling pressure accumulators with gas or topping up gas in pressure accumulators is strictly limited to either Komatsu service technicians or other persons authorised to handle highly pressurised gas.

●

Do not hit against the pressure accumulator.

●

Keep naked light and sources of heat away from pressure accumulators.

●

Do not drill holes into the pressure accumulator.

●

Do not weld parts to the pressure accumulator.

●

The service technicians must depressurise the hydraulic system before they can remove the pressure accumulators.

●

The service technician must let the gas escape before they can disassemble the pressure accumulator.

●

Have the gas pressure of the pressure accumulators checked either every 1,000 operating hours or once every year.

Fan and belts ●

Always keep sufficient distance from rotating parts and pay attention that nothing gets within the operating range of rotating parts.

●

There is danger that parts getting caught by the fan or the belt are cut off or hurled away.

●

Do not wear loose clothing, neckerchiefs or the like, or open, long hair that might get caught.

2-27

2.3. Precautions for maintenance

Waste material ●

Do not pour used oil into the sewage system, rivers, etc.

●

Collect used oil of the machine in appropriate containers. Do not let oil flow out onto the ground.

●

Adhere to all applicable laws and regulations when disposing of harmful substances, such as oil, fuel, coolant, solvents, filters, batteries, etc.

2-28

Safety

2.3. Precautions for maintenance

2.3.4. Tyres Handling of tyres (also refer to chapter "3.3.17. Tyre handling" on page 3-101) Tyres may burst and the resulting blast wave or parts whirling around may cause severe injury or damage. Make sure that the applicable procedures for servicing and replacing of wheels or tyres are fully understood and that only correct procedures are used. To ensure safety and reduce wear and tear, always adhere to the following instructions: ●

Inflate tyres up to the defined pressure. If the tyre pressure is too low, the tyres may heat up and burst. If the tyre pressure is too high, there is also danger that the tyre may burst.

●

If a tyre heats up considerably, inflammable gases are produced. A burning tyre may burst very easily, thus spreading fire over a large area.

●

Check the tyre pressure when the tyres are still cold. Do not let off pressure, when the pressure in a warm tyre has increased.

●

Do not light a fire and do not carry out welding near the tyre.

●

Keep the working area free of pointed or sharp objects that may damage the tyre.

●

Avoid any overload.

The values for tyre pressure and permitted speed given in this manual correspond to the manufacturers' values. Please refer to your local dealer or the tyre manufacturer for details.

2-29

2.3. Precautions for maintenance

Safety

Storing tyres ●

Basically, tyres must be stored in a protected room that cannot be accessed by unauthorised persons. Otherwise, playing children may be injured.

●

Place the tyres on an even surface and incline them 60° to 70° (2) against a solid stopper. Secure the tyres with wheel chocks (1) so that they cannot roll away, tip over, or slip.

●

If, however, a tyre tips over despite this safety measure, do not try to stop it, but get out of the way as quickly as possible, since tyres for construction machines are very heavy and may cause serious injuries.

60˚ – 70˚

2-30

GK100224

Safety

2.4. Safety labels

2.4.

Safety labels

All safety labels must be kept clean all times. Missing or damaged safety labels must be replaced.

Position of safety labels

9,10,11

5,13

g j

18 16

6,7 15

5,13

18 f 2

STEERING

START

AUTO GREASE

421-93-H1210

DIESEL

4 h

421-93-H1480

EMERGENCY

ALS

OFF

421-S38-2110

421-93-H1490

421-93-H1250

421-93-H1310

10 13 421-93-H1300

421-93-H1280

421-93-H1390

421-93-H1330

STOP 421-93-H1340

09667-A0880

14 11

421-93-H1360

421-93-H1320

421-93-H1380

421-93-H1370

421-93-H1290

421-93-H1400

GK100449

2-31

2.4. Safety labels

Safety

14 3

6 7

10 4 , 4A 9

1 11 2 8 9

5 , 5A

11 1 9

10 12 12A

15 16

DIESEL

421-9 3-H1490

12A

11 GK100226

2-32

Operation

3. Operation

3-1

3.1. General view

3.1.

Operation

General view

3.1.1. General view of the machine The directions indicated in this section refer to the directions shown by the arrows in the diagram below.

H 2

7 6 5 V

4 3 GK100374

Tipping lever

Lift cylinder

front

Bucket cylinder

Headlamp

rear

Bucket

Indicator lamp

right

Boom

Rear wheel

left

Front wheel

3-2

Operation

3.1. General view

3.1.2. Control elements and measuring instruments Standard type General view

14 15 16

1 2 3

4 5

18 19

22 8

9 GK100440

Main monitor

Brake pedal

Kickdown switch

Horn switch

Steering column tilt lever

Gear-change lock

Hazard lamp switch

Brake pedal

Lift arm and

Directional lever

Accelerator pedal

Speed control lever

Lamp switch

Cigarette lighter

Air conditioner panel

Turn signal lever

Safety lock

Speed control lever stopper

Dimmer switch

Joystick steering (option)

Wiper switch

Starting switch

Parking brake lever

Car radio

bucket control lever

3-3

3.1. General view

Operation

Main Monitor

SPEED

WORK MODE H S Ec

CHECK

CAUTION PARKING BRAKE

Maintenance Monitor

41 45 50

GK100227

57 GK100208

Main monitor 30

Turn signal pilot lamp

Central warning lamp

High beam pilot lamp

Speedometer

Centralised checking lamp

Transmission shift indicator

Engine pre-heating pilot lamp

ALS-Electronic

Pilot lamp for front working lamp

Pilot lamp for gear-change lock

Pilot lamp for rear working lamp

Emergency steering operating monitor

Transmission cut-off selector pilot lamp

Autoshift transmission pilot switch

Parking brake pilot lamp

Work mode selector switch

Maintenance monitor 50

Fuel gauge

Charge monitor

Engine cooling water temperature gauge

Brake oil pressure warning pilot lamp

Torque converter oil temperature gauge

Engine oil pressure warning lamp

Service meter

Engine oil level warning pilot lamp

Air cleaner clogging warning pilot lamp

Coolant level warning light

3-4

Operation

3.1. General view

Multi-function control lever (if installed) General view

14 15 16

1 2

5 23 19

21 8

GK100439

Main monitor

Brake pedal

Car radio

Horn switch

Steering column tilt lever

Kickdown switch

Hazard lamp switch

Brake pedal

Gear hold position

Speed control lever

Accelerator pedal

Directional switch

Air conditioner panel

Lamp switch

Multi-function control lever

Speed control lever stopper

Turn signal lever

Cigarette lighter

Wiper switch

Dimmer switch

Safety lock

Parking brake lever

Starting switch

Joystick steering (option)

3-5

3.1. General view

Operation

Main Monitor

SPEED

WORK MODE H S Ec

CHECK CAUTION PARKING BRAKE

Maintenance Monitor

41 45 50

GK100227

57 GK100208

Main monitor 30

Turn signal pilot lamp

Central warning lamp

High beam pilot lamp

Speedometer

Centralised checking lamp

Transmission shift indicator

Engine pre-heating pilot lamp

ALS-Electronic

Pilot lamp for front working lamp

Pilot lamp for gear hold position

Pilot lamp for rear working lamp

Emergency steering operating monitor

Transmission cut-off selector pilot lamp

Autoshift transmission pilot switch

Parking brake pilot lamp

Work mode selector switch

Maintenance monitor 50

Fuel gauge

Charge monitor

Engine cooling water temperature gauge

Brake oil pressure warning pilot lamp

Torque converter oil temperature gauge

Engine oil pressure warning lamp

Service meter

Engine oil level warning pilot lamp

Air cleaner clogging warning pilot lamp

Coolant level warning light

3-6

Operation

3.2.

3.2. Description of the individual elements

Description of the individual elements

3.2.1. Control monitor Main Monitor F

Maintenance Monitor D

D GK100228

The monitoring system consists of the main monitor and the maintenance monitor. Depending on the function type, the control system can be divided in: A, C and D

Control and measurement indicators

Warning light and indicator for emergencysteering system

B, E

Alarm indicators

Work mode selector switch

In the following sections you will find an explanation of all devices required for efficient machine operation. To carry out all operations correctly and safely, it is important to fully understand the operating principles of the equipment and the meaning of the indicators/displays.

3-7

3.2. Description of the individual elements

Control and measurement indicators (A, C and D) These parts comprise the meters (speedometer, fuel gauge, engine water temperature gauge, torque converter oil temperature gauge, service meter, transmission shift indicator) and the pilot lamps (turn signal indicator, head lamp, high beam, preheating, front working lamp, rear working lamp, transmission cut-off, parking brake). Warning light and indicator for emergency-steering (F) This part comprises the warning light and the indicator for the emergency steering system. For details see section "5. Maintenance" on page 5-1 and following and chapter "5.8.3. Checks before starting" on page 5-38. Alarm indicators (B, E) These parts comprise the central check lamp (CHECK), the central warning lamp (CAUTION), and warning pilot lamps (engine water level, engine oil level, brake oil pressure, engine oil pressure, battery charge, and air cleaner clogging). Work mode selector switch (G) This part comprises the 3 control lamps for the work mode selector switch (High - Standard - Economy). Checking the control system After switching off the engine, wait at least 30 before starting to check the control system. Before starting the engine, set the starting switch to operating position 'ON'. Control if ●

all instruments and control/warning indicators light up for approx. 3 seconds,

●

the alarm buzzer produces an audible signal (approx. 1 second),

●

the speedometer displays the number '88',

●

the transmission shift indicator displays the number '8',

●

finally two beeps indicate that all control checks are terminated.

If you detect a malfunction, arrange an inspection with the relevant dealer. NOTE If the start switch is turned to operating position 'ON' with either the direction lever or the directional switch not being in the neutral position, the central warning lamp (CAUTION) and the alarm buzzer will issue a signal. In this case, reset the lever or the switch to the neutral position. The warning lamp goes out and the audible signal is ended. 3-8

Operation

3.2. Description of the individual elements

Warning indicators

In the cab, top right 2

Main Monitor 10

WORK MODE H S Ec

SPEED

CHECK CAUTION PARKING BRAKE

Maintenance Monitor GK100227

GK100208

1. Central Check Lamp (CHECK)

WARNING If this monitor lamp flashes, carry out inspection and maintenance of the appropriate machine part as soon as possible.

â&#x2014;?

If any abnormality is found before starting the engine (engine oil level, engine water level), the affected monitor lamp and the central CHECK lamp will flash.

GK100376

Check which monitor lamp is flashing and remove the cause of the malfunction before starting. When carrying out the pre-start checks, do not rely on the monitor alone. Always carry out the specified maintenance items, as well. If a low engine oil level is found during the pre-start checks, the operator must know that the level changes after starting the machine and that the central CHECK lamp and monitor lamp will stop flashing despite the low level.

3-9

3.2. Description of the individual elements

Operation

In case of a low engine water level, the central CHECK lamp will go out when the engine is started; instead, however, the central CAUTION lamp will flash and the alarm buzzer will sound intermittently. ●

If an abnormality in the battery charging system is detected while the engine is running, the battery charge pilot lamp and the central CHECK lamp will flash simultaneously. In this case, check the charging circuit.

2. Central warning lamp (CAUTION)

WARNING If these monitor lamps flash, stop the engine immediately or let it run at low idling and proceed as follows.

●

If there is an abnormality in any CAUTION item while the engine is running (engine water temperature, torque converter oil temperature, engine water level, brake oil pressure, engine oil pressure), the alarm buzzer will sound intermittently and the monitor lamp for the affected element and the central CAUTION lamp will flash simultaneously.

●

If the fuel gauge enters the red range while the engine is running, the fuel gauge and the central CAUTION lamp will flash. In this case, check the fuel level and fill-up fuel.

A0060970

3. Coolant level warning light NOTE Position the machine on level ground, before starting the check. During pre-start checks: This warns the operator that the coolant level in the radiator has dropped when carrying out the pre-start checks (main switch ON, engine stopped). If the coolant level in the radiator is low, the warning lamp and the central CHECK lamp will flash. In this case, check the coolant level in the radiator sub-tank and add water. In operation (engine running): Normally, this warning lamp should be off. If the coolant level in the radiator is too low, the warning lamp and the central CAUTION lamp will flash, and the alarm buzzer will sound intermittently. In this case, stop the engine, check the coolant level in the radiator sub-tank and add water. Stop the machine on level ground before carrying out this check.

3-10

A0060980

Operation

3.2. Description of the individual elements

4. Engine oil level warning lamp This warns the operator that the oil level in the engine oil pan has dropped. During pre-start checks: If the oil level in the engine oil pan is low, the warning lamp and the central CHECK lamp will flash. In this case, check the oil level in the engine oil pan and add oil. In operation: Even if the engine oil level warning lamp is flashing during the pre-start check, it will go out after starting the engine.

A0060990

5. Brake oil pressure warning lamp This warns the operator that the brake oil pressure has dropped. During pre-start checks: When the engine is stopped, the brake oil pressure circuit is not actuated, so that the warning lamp and the central CHECK lamp are also off. In operation: If the brake oil pressure drops, the warning lamp and the central CAUTION lamp will flash, and the alarm buzzer will sound intermittently. In this case, stop the engine immediately and check the brake oil pressure circuit. NOTE The warning lamp may flash and go out approx. 10 seconds after the engine is started. This is because pressure is being stored in the brake accumulator. It does not indicate any malfunction.

6. Engine oil pressure warning lamp This warns the operator that the lubricating oil pressure of the engine has dropped. If it flashes, stop the engine and check. Pre-start check: Lamp is lit. Engine started or running: When the engine is started, the lubrication pressure is formed and the lamp goes out. If the engine lubrication pressure drops during operation, the warning lamp and the central CAUTION lamp will flash, and the buzzer will sound intermittently.

3-11

3.2. Description of the individual elements

Operation

7. Battery charge warning lamp This warns the operator that there is an abnormality in the charging system with the engine running. Pre-start check: Lamp is lit. Engine started or running: When the engine ist started, the alternator generates electricity and the lamp goes out. If any abnormality occurs in the charging system, the warning lamp and the central CHECK lamp will flash. In this case, check the charging circuit.

8. Air cleaner clogging warning lamp When the engine is running, this warns the operator that the air cleaner element is clogged. Pre-start check: Lamp is OFF. In operation: If the air cleaner becomes clogged, the warning lamp and the central CHECK lamp will flash. In this case, clean or replace the element.

A0060950

9. Warning lamp for central lubrication system The yellow control lamp in the button (in the cab, top right) lights up if there is a fault in the central lubrication system.

GK100375

10. Emergency steering pilot lamp This indicates that the main pump is operating normally when the machine is traveling. If the engine stops when the machine is traveling, or if there is any abnormality in the pump circuit, the monitor flashes to indicate that the emergency steering system has been actuated. If the monitor flashes stop the engine immediately.

GK100404

3-12

Operation

3.2. Description of the individual elements

Measuring instruments and control elements

In the cab, top right 6

Main Monitor

7 2

3 17

SPEED

WORK MODE H S Ec

CHECK

CAUTION PARKING BRAKE

5 14 16 GK100227

Maintenance Monitor 8

11 GK100208

Control indicators When the starting switch is ON, the control indicators light up if the display items are functioning correctly. 1. Parking brake control lamp This lamp lights up when the parking brake is applied.

3-13

3.2. Description of the individual elements

Operation

2. Engine pre-heating control lamp This lamp is on when the pre-heater is in operation. This lamp lights up when the starting switch is turned to the 'ON' position, and goes out when pre-heating is finished. The time the preheater is operational varies according to the water temperature when the engine is started.

A0061050

3. Control lamp for front working lights This lamp lights up when the front working lights are switched on.

4. Control lamp for rear working lights This lamp lights up when the rear working lights are switched on.

5. Transmission cut-off control lamp This lamp lights up when the transmission cut-off switch is turned ON. If the control lamp is ON and the left brake pedal is depressed, the transmission will be reset to neutral.

3-14

Operation

3.2. Description of the individual elements

6. Turn signal control lamp When the turn signal lamp flashes, the pilot lamp will also flash.

AE070320

7. High beam control lamp This lamp lights up when the head lights are set to high beam.

Measuring instruments / meters 8. Fuel gauge This gauge indicates the amount of fuel tank. E: Tank is EMPTY F: Tank is FULL The indicator should be illuminated in the green range during operation. If, during operation, it enters the red range, the fuel gauge lamp and central CAUTION lamp will flash. If only the red range is illuminated during operation, it means that there are less than 50 liters (13.2 US gal, 11UK gal) of fuel left, so check and add fuel.

AE070290

9. Engine coolant temperature gauge This gauge indicates the temperature of the coolant. If the temperature is normal during operation, the green range will light. If the red range lights during operation, stop the machine and run the engine without load at medium speed until the green range lights. If the indicator lights up to the 1st red level, the engine coolant temperature gauge lamp and the central CAUTION lamp will flash; when the indicator lights up to the 2nd red level, the alarm buzzer will also sound intermittently.

AE070270

3-15

3.2. Description of the individual elements

Operation

10. Torque converter oil temperature gauge This gauge indicates the temperature of the torque converter oil. If the temperature is normal during operation, stop the machine and run the engine with no load at medium speed until the green range lights. If the indicator lights up to the 1st red level, the torque converter oil temperature gauge lamp and central CAUTION lamp will flash; when the indicator lights up to the 2nd red level, the alarm buzzer will also sound intermittently. AE070280

11. Hourmeter This meter shows the total operation hours of the machine. The hourmeter advances while the engine is running - even if the machine is not travelling. While the engine is running, the green pilot lamp on the hourmeter flashes to show that the hourmeter is functioning. The hourmeter progresses by 1 when the engine has been operated for one hour, regardless of the engine speed. AE070300

12. Speedometer This indicates the travelling speed of the machine.

AE070310

13. Gear shift indicator This indicator indicates the present speed range of the transmission. When the directional lever is in the N position, N is displayed on the indicator. When the directional lever is in the F or R position, the gear position of the gear shift lever is displayed as a numeral. A0061150

3-16

Operation

3.2. Description of the individual elements

14. Autoshift transmission pilot lamp (yellow) This lamp lights up when the transmission autoshift manual switch is turned ON (manual).

GK100006

15. Work mode selection switch pilot lamps This lamps shows the selected work mode (High - Standard Economy).

GK100232

16. ALS-electronics pilot lamp (option) This lamp lights up when the ALS-electronics switch is turned ON.

GK100405

17. Turning light switch with control lamp (option) This turning light switch is only installed in machines which are provided with a turning light. If you switch on the turning light, the green control lamp in the switch lights up.

GK100402

3-17

3.2. Description of the individual elements

Operation

3.2.2. Switches Standard equipment

5 6 7

8 9

GK100207

3 19 WORK MODE H S Ec

SPEED

CHECK

CAUTION

PARKING BRAKE

2 18 22 21 GK100227

3-18

Operation

3.2. Description of the individual elements

Multi-function control lever (if installed)

5 6 7 8

14 11 12 13 10

GK100209

3 19 WORK MODE H S Ec

SPEED

CHECK

CAUTION PARKING BRAKE

2 18 22 21 GK100227

3-19

3.2. Description of the individual elements

Operation

1. Start switch This switch is used to start or stop the engine. OFF

OFF In this position, the key can be inserted and pulled off, the electric circuit is turned off and the engine is switched off.

START

ON In this position, electric current flows in the charging, lamp and auxiliary circuits. Keep the start switch key set to ON while the engine is running.

A0061160

START This is the engine start position. Keep the key at this position during cranking. Release the key immediately after starting the engine; it will automatically return to the ON position. NOTE The engine cannot be started unless the directional lever or with installed multi-function control lever - the directional switch is set to position 'N'. 2. Transmission CUT-OFF switch

WARNING If the machine has to be started on a slope, always turn the transmission cut-off switch to OFF and depress the left brake pedal. Then depress the accelerator pedal while releasing the left brake pedal to start-up the machine slowly.

Pressing the push button switches the cut-off ON and OFF, alternately. After pressing the switch, the control lamp will light up; if it is pressed again, the pilot lamp will go out and the transmission cutoff is turned OFF. Normally, this switch is set to ON. OFF

Acts as normal brake (like right brake pedal).

Acts as normal brake, but also switches transmission to NEUTRAL.

3-20

CUT-OFF

A0061170

Operation

3.2. Description of the individual elements

3. Front working lights switch

WARNING Always turn the working lights off before travelling on public roads.

WORKING LAMP F

Before turning on the front working lights, set the lamp switch for the side clearance light or for the head light to ON. Otherwise, the working lights will not light up.

A0061180

After pressing the switch, the control lamp will light up; if it is pressed again, the control lamp will go out and the working lamp is turned OFF. 4. Rear working lights switch

WARNING Always turn the working lights off before travelling on public roads.

WORKING LAMP R

Before turning on the rear working light, set the lamp switch for the side clearance light or for the head lights to ON. Otherwise the working lights will not light up.

A0061181

After pressing the switch, the control lamp will light up; if it is repressed, the control lamp will go out and the working lamp is turned OFF. 5. Lamp switch This is used to light up the head lamps, side clearance lamps, tail lamps, and instrument panel lighting. 1

OFF

off

position

2 3

side clearance lamp, tail lamps and instrument panel lighting are turned on, head lamps light up in addition to lamps at position.

AE061190

NOTE The lamp switch can be operated regardless of the lever position.

3-21

3.2. Description of the individual elements

Operation

6. Turn signal lever This lever operates the turn signal lamps. 1

LEFT TURN

Push lever FORWARD

RIGHT TURN

Pull lever BACK 1

NOTE â&#x2014;?

â&#x2014;?

When the lever is operated, the turn signal control lamp will also light up.

OFF 2 AE061200

When the steering wheel is turned to the neutral position, the turn signal lever will automatically return to OFF. If not, return the lever manually to OFF.

7. Dimmer switch This switches the head lamp between high beam and low beam. A

Low beam

High beam A B AE061210

8. Horn button When the button in the center of the steering wheel is pressed, the horn will sound.

AE061220

3-22

Operation

3.2. Description of the individual elements

9. Hazard warning switch ON

WARNING

OFF

Only use the hazard warning lights in the event of an emergency. Driving with hazard warning lights on only irritates other road users.

This switch is used in the event of an emergency, e.g. if the machine breaks down.

AE061230

ON: All signal lamps flash NOTE The indicator lamps, the indicator control lamp and the hazard warning light control lamp (1) all flash when this switch is turned on.

10. Directional switch (only with installed multi-function control lever)

N 2

You can change the travel direction of the machine using the directional switch. Position 1

Forward drive

Position N

Neutral

Position 2

Reverse drive GK100235

NOTE The engine can only be started if the directional switch is in the neutral â&#x20AC;&#x153;Nâ&#x20AC;? position.

3-23

3.2. Description of the individual elements

Operation

11. Kickdown function (1) If you are driving in second gear, you can increase thrust for excavation and loading work by using the kickdown function. The transmission changes down to 1st gear as soon as the kickdown function is switched on.

Kickdown ON In second gear, press the button (1) on top of the handles of the work hydraulic system control lever. If your machine is fitted with a multi-function control lever you can switch the kickdown function on by pushing the toggle switch at the front of the multi-function control lever to position “1” in 2nd gear.

GK100236

1 Kickdown OFF You have three possibilities for switching the kickdown function off: a)

Put the directional lever or the directional switch into neutral first and then into the forward or reverse drive position.

Put the gear lever into any other gear (excluding 2nd gear).

Switch the starter switch off (switch position “OFF”).

GK100237

GK100447

3-24

Operation

3.2. Description of the individual elements

12. Gear-change lock (2) Use the gear-change lock if you are driving up or downhill, or carrying out work which should only be carried out in a specific gear. As soon as you activate the gear-change lock, the selected gear is retained even if you increase engine speed to a level where the automatic transmission would normally change into a higher gear.

Gear-change lock on 1. Select the required gear.

GK100236

2. Start the machine and increase speed until the selected gear is shown on the gear shift display. 1 3. Press the switch (2) for the gear-change lock. The gearchange lock is now switched on and the control lamp for the gear-change lock is lit.

If your machine is fitted with a multi-function control lever, you can switch the gear-change lock on by pressing the toggle switch at the front of the multi-function control lever to position “2”. The gear-change lock is now switched on and the control lamp for the gear-change lock is lit.

GK100237

Gear-change lock off You can switch the gear-change lock off by pushing the gearchange lever or pressing the switch (2) again. The gear-change lock is now switched off again and the control lamp for the gearchange lock goes out.

If your machine is fitted with a multi-function control lever, you can switch the gear-change lock off by pushing the toggle switch at the front of the multi-function control lever to position “2”. The gear-change lock is now switched off again and the control lamp for the gear-change lock goes out. GK100447

13. Front wiper switch 1 Turn the rotary control (A) to switch-on the front windscreen wiper(s).

●

Switch position

●

Window display(C)

Operation

OFF

INT

Interval action

4 B

Slow

Fast

A AE061240

Push button (B) and hold to spray washing fluid onto the front windscreen.

3-25

3.2. Description of the individual elements

Operation

14. Rear wiper switch 4

Turn lever (C) to operate the rear wiper.

●

Display

2 1

Position of switch

Operation

Washer fluid sprayed

OFF

Wiper actuated

Washer fluid plus wiper actuated

AE061250

15. Cigarette lighter This is used to light cigarettes. To use, push the lighter in. After a few seconds it will spring back. Now you can remove the lighter and light your cigarette. NOTE AE061260

Do not connect other electrical devices than the operation light to the cigarette lighter. Failure to comply may result in malfunction of the on-board electronics. 16. Room lamp switch 1 This lights up the room lamp. 2 Position 1

OFF

Position 2

Lights up when cab door is opened

Position 3

Lights up

NOTE AE061270

●

The room lamp lights up even when the main switch is OFF; so when leaving the operator's compartment, turn the switch to position 1 or 2.

●

When operating with the cab door fully open, set the switch to position 1 (OFF).

3-26

Operation

3.2. Description of the individual elements

17. Parking Brake

WARNING

Always apply the parking brake when parking or leaving the machine.

The machine may still move after the parking brake is applied. Because of this the foot brake should be kept applied until the parking brake warning light comes on. GK100239

The parking brake is applied using the lever (1) ON

Pull the lever (1) up. The parking brake is applied, and the parking brake warning light comes on.

OFF

Lift up the lock ring (2) and push the lever (2) down. The parking brake is released.

NOTE ●

If the forward - reverse lever is moved to F or R, when the parking brake is applied, the warning light will come on and a buzzer will sound.

●

If the parking brake is used several times when engine is not running, it may be impossible to release the parking brake using lever (1).

●

The machine can not be moved with the parking brake on.

●

The parking brake should not be used to stop the machine, unless there is an emergency. Apply the parking brake only when the machine has stopped.

●

If the parking brake is used as a secondary brake at high speed, (top speed), then it should be checked as soon as possible by a qualified Komatsu workshop.

18. Transmission autoshift manual switch This switch is used to change between autoshift and manual transmission mode. Position ON

Manual shift mode (pilot lamp 1 ON)

Position OFF Auto shift mode

GK100240

3-27

3.2. Description of the individual elements

Operation

19. Work mode selector switch (1) This switch (1) is used to select the recommended work mode. H

(High)

● ● ●

(Standard)

● ●

(Economy)

● ● ●

high loading performance short loading cycles max. breakout / lifting forces load and carry road driving

H (1)

WORK MODE H S Ec

S Ec

load and carry road driving low fuel consumption

GK100241

20. Central lubrication system button The central lubrication system can be operated manually with this button (top right in the cab). Press the button once with the ignition switched or the engine running: the central lubrication system carries out one lubrication cycle.

21. ALS-electronics switch (option) Press the push button to activate the ALS-electronics. If the pilot lamps lights up, the ALS-electronics is activated. If the pilot lamp does not light up, the ALS-electronics is not activated. Also refer to chapter "7.1. ALS-electronics" on page 7-2

ALS

GK100406

22. Turning light switch with control lamp (option) This turning light switch (top right in the cab) is only installed in machines which are provided with a turning light. If you switch on the turning light, the green control lamp in the switch lights up.

3-28

Operation

3.2. Description of the individual elements

23. Joystick steering button (option) 2

The steering joystick is mounted on the left armrest of the operatorâ&#x20AC;&#x2122;s seat. A green button (1) and a red button (2) are located on the housing. Joystick steering is switched on using the green button (1). Joystick steering is switched off using the red button (2).

24. Battery main switch (option) NOTE Do not operate the battery main switch with the engine running! The battery main switch (1) disconnects the power supply of the machineâ&#x20AC;&#x2122;s electrical system. The switch is located next to the engine on the right side of the machine. If the machine is to be taken out of service for a longer time, you must switch off the battery main switch and remove the ignition key.

3-29

3.2. Description of the individual elements

Operation

3.2.3. Control levers and pedals Standard equipment

3 4

GK100207

3-30

Operation

3.2. Description of the individual elements

Multi-function control lever (if installed)

3 4

GK100209

1. Gear lever This lever controls the travel speed of the machine.The machine is fitted with an automatic transmission with 4 FORWARD and 4 REVERSE GEARS. Push the gear lever into the position for the required speed range. â&#x2014;? â&#x2014;?

1st and 2nd gears are used for working. 3rd and 4th gears are used for travel.

1 2 A

3 4

If the gear lever stop (A) is applied (see item "3. Gear lever stop" on page 3-32), it is not possible to shift into 3rd or 4th gear. Deactivate the gear lever stop before changing gear. Position 1

1st gear

Position 2

2nd gear

Position 3

3rd gear

Position 4

4th gear

GK100245

3-31

3.2. Description of the individual elements

Operation

Adjusting the length of the gear lever

The length of the gear lever (1) can be adjusted to three different lengths (positions A, B and C). To adjust length, remove the screw (2) underneath the lever grip (3) and push the grip to the required position and then fasten in position again using the screw (the lever is set to position B at works).

B C 3 1

2 AE061310

2. Directional lever This lever is used for changing the travel direction. The engine can only be started if the directional lever is set to the neutral N position. Position 1

Forward drive

Position N

Neutral

Position 2

Reverse drive

1 N 2

AE061330

NOTE If your machine is fitted with a multi-function control lever, it has a directional switch instead of a directional lever (see section "Multi-function control lever (if installed)" on page 3-5) Adjusting the length of the directional lever The length of the lever (1) can be adjusted to three different lengths (positions A, B and C). To adjust length, remove the screw (2) underneath the lever grip (3) and push the grip to the required position and then fasten in position again using the screw (the lever is set to position B at works).

A B C 3 1

2 AE061310

3. Gear lever stop The stop prevents the gear lever being shifted into 3rd or 4th gear. Position 1

Stop activated

Position 2

Stop deactivated

1 2 AE061340

3-32

Operation

3.2. Description of the individual elements

4. Safety lock lever for the work hydraulic system

WARNING ●

●

When leaving the operator's compartment, make sure to set the safety lock lever to the LOCK '1' position. If the control levers are not locked and are touched by mistake, this may lead to a serious accident. If the safety lock lever is not positively set to the LOCK '1' position, the control levers may not be properly locked. Control whether the situation is as shown in the diagram.

GK100215

When parking the machine or performing maintenance works, always lower the bucket to the ground and apply the lock.

This is used to lock the work equipment levers. Position 1

Work hydraulic system locked

Position 2

Work hydraulic system unlocked

Push the lever down to apply the lock.

3-33

3.2. Description of the individual elements

Operation

5. Control lever for work hydraulic system (1-lever control) 1

This lever is used to operate the lift arm and the bucket. 1

RAISE

HOLD

LOWER

FLOAT

TILT

m n

When the control lever is pulled further from the RAISE position, the lever is stopped in this position until the lift arm reaches the preset position of the kick-out, and the lever is returned to the HOLD position.

2 3

The lift arm is kept in the same position.

GK100292

HOLD

DUMP

o k l

The lift arm moves freely under external force.

When the control lever is pulled further from the TILT position, the lever is stopped in this position until the bucket reaches the preset position of the positioner, and the lever is returned to the HOLD position. The bucket is kept in the same position.

AE061380

7 6

Two lever control: see section "Two lever control" on page 3-82. GK100246

AE061360

3-34

Operation

3.2. Description of the individual elements

6. Multi-function control lever for the work hydraulic system The multi-function control lever is an optional extra and controls the work unit.

SW Float

Lower

Hold

Raise

Tilt

Dump

The multi-function control lever locks into this position. The “SW” setting is used for levelling work (removing soil). The work unit lowers to the set position by own weight and can be moved freely by external force.

GK100247

The boom stops in its present position. If the multi-function control lever is pulled further in the raise direction “H”, the lever locks into position until the boom reaches the pre-set shutoff position of the raise limit switch. The control lever then returns automatically to the stop position “0”. If the multi-function control lever is pulled further in the tip-in direction “E”, the lever locks into position until the bucket reaches the pre-set position of the automatic digging angle. The multi-function control lever then returns automatically to the stop position “0”.

NOTE The work unit must not be used to lift heavy loads off-balance (i.e. only on one side).

3-35

3.2. Description of the individual elements

Operation

7. Brake pedals

WARNING ●

When travelling downhill, use the engine as a brake, and always use the right brake pedal.

●

Do not use the brake pedals repeatedly unless necessary.

●

Do not put your foot on this pedal unless necessary.

Right brake pedal The right brake pedal operates the wheel brakes and is used for normal braking. Left brake pedal The left brake pedal operates the wheel brakes, and if the transmission cut-off switch is set to ON, it also returns the transmission to neutral. If the transmission cut-off selector switch is set to OFF, the left brake pedal acts in the same way as the right brake pedal. GK100265

NOTE When the accelerator is being used for operating the work equipment, always use the left brake pedal to slow down or stop the machine after setting the transmission cut-off switch to ON. If the selection switch for the transmission cut-off switch to OFF, the left brake pedal holds the same function as the right brake pedal.

8. Accelerator pedal This pedal controls the engine speed and output. The engine speed can be freely controlled between low idling and full speed.

GK100265

3-36

Operation

3.2. Description of the individual elements

3.2.4. Steering column tilt lever WARNING Stop the machine before adjusting the angle of the steering wheel.

This lever allows the steering column to be tilted forward or backward. Pull the lever up and move the steering wheel to the desired position. Then push the lever down to lock the steering wheel in position.

1 2

GK100250

Range of adjustment: 125 mm (4.92 in) (stepless)

3.2.5. Cap with lock The hydraulic tank filler port are equipped with lock. Open and close the cap lock as follows.

Hydraulic tank To open the cap 1. Insert the key into the cap as far as it will go. If the key is turned before it is inserted all the way, it may break. 2. Turn the key counterclockwise and bring the rotor groove in line with the aligning mark (A) on the cap. Turn the cap slowly until a "clicking" sound is audible. This releases the lock and allows the cap to be opened.

1 45Â° 2

180Â° GK100251

To lock the cap 1. Turn the cap into place. 2. Turn the key clockwise and take the key out. A

GK100252

3-37

3.2. Description of the individual elements

Operation

3.2.6. Safety bar WARNING â&#x2014;?

Always apply the safety bar while performing maintenance operations and while transporting the machine.

â&#x2014;?

Always remove the safety bar during normal operations.

The safety bar is used during maintenance or when transporting the machine. It locks the front frame and rear frame, and prevents the front and rear frame from bending. GK100253

3.2.7. Towing pin 1. Insert towing pin (1) into hole (2) in the counterweight. 2. Use linch pin (3) to fix the towing pin.

To remove the pin proceed in reverse order. 2

AE064130

AE061450

3-38

Operation

3.2. Description of the individual elements

3.2.8. Grease pump The grease pump is stored inside the battery box at the rear of the machine. After using it, wipe off all grease from the outside of the pump and then store it in the box. It can be stored in either the left or right battery box.

GK100393

3.2.9. Backup alarm The horn sounds when the drive direction lever has been placed in reverse drive. Adjusting volume A three-way switch is located on the rear of the unit for adjustment of volume. Switch positions: HI

loud

LOW

low

MED

medium

3.2.10. Fuses NOTE Before replacing a fuse, be sure to turn off the start switch. The fuses protect the electrical equipment and wiring from burning out. If the fuse becomes corroded, or white powder can be seen, or the fuse is loose in the fuse holder, replace the fuse.

Fuse box 1 Fuse box 2

Only replace fuses with fuses of the same capacity.

AE061490

3-39

3.2. Description of the individual elements

Operation

Fuse capacity and circuit designations Fuse box 1

No.

Fuse Capacity

Name of circuit

20 A

Main lamp circuit

20 A

Backup lamp, Backup alarm, horn

10 A

Turn signal indicator lamp

10 A

R.H. head lamp

10 A

L.H. head lamp

10 A

R.H. side clearance lamp

10 A

L.H side clearance lamp

10 A

Parking brake

10 A

Transmission control

10 A

Instrumental panel

10 A

Work equipment positioner

10 A

Starting switch

20 A

Hazard lamp

10 A

Spare

10 A

Auto-greasing

1 2 3 4 5 6 7 8

9 10 11 12 13 14 15

AE061500

3-40

Operation

3.2. Description of the individual elements

Fuse box 2

No.

Fuse Capacity

Name of circuit

10 A

Front working lamp

10 A

Rear working lamp

20 A

Air conditioner

20 A

Air conditioner

20 A

Wiper, washer

10 A

auto shift (option)

10 A

cigarette lighter, radio

10 A

Rotating lamp (option)

10 A

Engine cut-off solenoid

10 A

Auto greasing (option)

10 A

spare

10 A

spare

20 A

spare

10 A

spare

20 A

Solenoid accelarator

1 2 3 4 5 6 7 8

9 10 11 12 13 14 15

AE061500

3-41

3.2. Description of the individual elements

Operation

3.2.11. Slow-blow fuses If the power does not come on when the starting switch is turned ON, a slow-blow fuse may be blown; check the fuses and replace, if necessary. The slow blow fuses are next to the engine on the left side of the machine.

1 2 3

Slow-blow fuses 1

100 A

30 A

150 A

3-42

Main power Battery power (starting switch, hazard) Engine pre-heating

GK100254

Operation

3.2. Description of the individual elements

3.2.12. Air conditioning Layout and functions of the control panel 3

DEF

FACE

Temperature level indicator lamp

FOOT

FACE

FOOT

GK100255

1. Fan switch These switches can to used to set the air flow can to four different levels. This switch also acts as the main switch for the air conditioning. When the switch is pressed, the indicator lamp above the respective switch lights up to indicate the air flow.

A0061540

2. Air conditioning switch This is used to start or stop the cooling or dehumidifying function. When the fan switch is turned ON and the air conditioning switch is pressed, the indicator lamp above the switch lights up. When the switch is pressed again, the switch is turned OFF and the indicator lamp goes out.

A0061550

3-43

3.2. Description of the individual elements

Operation

3. Mode selector switches These are used to select the vents. The following five vent modes are available: FACE, FACE/FOOT, FOOT, FOOT/DEF, DEF. After pressing one of these switches, the indicator lamp above lights up to display the vent mode.

A0061560

4. Fresh/recirc selector switch This switch is used to select between recirculating the air inside the cab or taking in fresh air from outside. When the RECIRC position is selected, the indicator lamp above the switch lights up. When the switch is re-pressed, the indicator lamp goes out, and fresh air is taken in. A0061570

5. Temperature control switch The temperature can be adjusted without steps from low to high. The temperature level indicator lamps (6) light up to indicate the temperature of the air coming from the vents. The more the blue lamps light up, the lower the temperature. The colour of the indicator lamp changes while the switch is being pressed. When the temperature reaches the desired level, release the switch to set the temperature. The settings for each mode are retained in memory even when the starting switch is turned OFF. However, in the following cases, the setting are to be redone: ●

When the machine has been out of use for more than 7 days

●

When the battery voltage is extremely low

●

When there has been abnormal interference from outside

●

When the fan switch is turned OFF (the setting is not kept in memory with only the air conditioner switch active)

NOTE If the air conditioner is used together with the FRESH position, the inside of the cab will be pressurized and this will prevent the entry of dust. The higher the position of the fan switch, the more effective the pressurizing.

3-44

A0061580

Operation

3.2. Description of the individual elements

Operating instructions

Condition

Switch

Fan switch

Air conditioner switch

Temperature control switch

FRESH/ RECIRC switch

Vent mode selector switch

Rapid

All blue

RECIRC

FACE

Normal

HI-LO

More than half are blue

FRESH

FACE

HI-LO

More than half are red

FRESH

FOOT

Rapid

OFF

All red

RECIRC

FOOT

Normal

HI-LO

OFF

More than half are red

FRESH

FOOT

Defroster

More than half are red

FRESH

DEF

Ventilation of pressurizing

HI-LO

OFF

All blue

FRESH

FACE

Cooling

Dehumidifying, heating

Heating

The defrosting process is optimised, if the temperature control switch is set in such a way that all lamps light up in red. Set the vent mode selector switch to the intermediate DEF position. With the FACE vents, it is possible to adjust the direction of the air flow and to turn it on or off. However, do not adjust the FACE mode with the vents closed.

Cool box If the air conditioning is used for cooling, the cool box may be used for keeping refreshments and other things cool. When the heating is being used, it can be used to keep things warm. When using the box, open the vent grill (1). When not using the box, close the grill. Do not use the cool box for things which smell or leak water or break easily.

1 GK100256

Do not use it as a holder for tools or other small objects.

3-45

3.3. Operation

3.3.

Operation

3.3.1. Pre-start checks Walk-around check WARNING Leaking oil or fuel, or accumulation of flammable material around high temperature parts, such as the engine muffler or turbocharger, may cause fire. Check these points carefully; if any abnormality is found, repair it or contact your Komatsu dealer.

Before starting the engine, look around the machine and under the machine to check for loose nuts or bolts, or leaking oil, fuel, or coolant, and check the condition of the work equipment and hydraulic system. Check also for loose wiring, play, and collection of dust at places which reach high temperatures. Always carry out the items in this section before starting the engine each day.

GK100257

3-46

2, 3

Operation

3.3. Operation

1. Check for damage, wear, play in work equipment, cylinders, linkage, hoses Check that there are no cracks, excessive wear and tear, or play in the work equipment, cylinders, linkage, or hoses. If any abnormality is found, repair it. 2. Remove dirt and dust from around engine, battery, radiator Check if there is any dirt or dust accumulated around the engine or radiator. Check also if there is any flammable material (dead leaves, twigs, grass, etc.) accumulated around the battery or high temperature engine parts, such as the engine muffler of turbocharger. Remove all such dirt or flammable material. 3. Check for leakage of water or oil around engine Check that there is no oil leakage from the engine or water leakage from the cooling system. If any abnormality is found, repair it. 4. Check for oil leakage from transmission case, axle, hydraulic tank, hoses, joints Check for leakage of oil. If any abnormality is found, repair it. 5. Check for oil leakage from brake line Check for leakage of oil. If any abnormality is found, repair it. 6. Check for damage or wear to tires, loose mounting bolts Check for cracks or peeling of the tires and for cracks or wear to the wheels (side rim, rim base, lock ring). Tighten any loose wheel nuts. If any abnormality is found, repair or replace the part affected. If any valve caps are missing, install new caps. 7. Check for damage to handrail, loose bolts Repair any damage and tighten any loose bolts. 8. Check for damage to gauges, monitor, loose bolts Check that there is no damage to the gauges and monitor in the operator's cab. If any abnormality is found, replace the parts. Remove any dirt from the surface. 9. Check air cleaner for loose mounting bolts Check for any loose mounting bolts and tighten, if necessary. 10. Check for loose battery terminals Tighten any loose terminal.

3-47

3.3. Operation

Operation

11. Check seat belt and equipment

WARNING Even if there appears to be no abnormality with the seat belt, always replace it once every three years.

NOTE REMARK The date of manufacture of the seat belt is marked on the belt at the position indicated by the arrow in the diagram on the right.

AE061610

Check that there are no loose bolts at the equipment using the seat belt is fixed to the machine and tighten, if necessary. Tightening torque: 25 - 30 Nm If the belt is damaged or fluff is starting to form, or if there is any damage or deformation of the seat belt holders, replace the seat belt with a new one. AE061620

12. Checking the central lubrication system: grease level and pressure relief hole in the safety valve Please ensure that the grease level in the grease reservoir is between the minimum (1) and maximum (2) markings. Top up with grease if the level is too low - see section "5.8.2. Maintenance upon demand" on page 5-21. Check pump and grease reservoir for leaks. Grease must not emerge from the pressure relief hole in the safety valve (3). If grease is leaking, there is a fault in the central lubrication system's circuit. Please contact your local KOMATSU dealer if there are any leaks or faults.

13. Check for loose bolts on ROPS Check for any loose or damaged bolts. If any loose bolts are found tighten them to 925 - 930 Nm. If any bolts are damaged, replace them with original Komatsu bolts.

14. Clean cab window Clean the cab window to ensure good visibility before operating the machine. 3-48

Operation

3.3. Operation

Check before starting Perform daily the steps described in this section before starting the engine. Check coolant level, add water 1 WARNING Normally, the radiator cap must not be opened. Always wait for the engine to cool down before checking the water level in the sub-tank.

1. Open the top cover at the front of the engine hood of the machine, and check that the coolant level is between the FULL and LOW mark in sub-tank (1). If the coolant level is low, fill-up water to the FULL level through the water filler in sub-tank (1).

AE064180

2. After adding water, re-tighten the cap securely. 3. If sub-tank (1) is empty, check for water leakage, then fill-up water in radiator and sub-tank.

FULL LOW AE061640

Check fuel level, add fuel G WARNING When adding fuel, never let the fuel overflow since this may cause a fire. If you spill fuel, clean it up thoroughly at once.

1. Turn the engine starting switch to the ON position, then check the fuel level at the fuel gauge (G). Then reset the starting switch to OFF.

AE060954

2. Upon completion of work, add fuel until the fuel tank is full. Details about opening and closing the cap, see section "3.2.5. Cap with lock" on page 3-37. For details of the recommended fuel, see section "5.4.2. Lubricants, fuels and filling capacities" on page 5-13. 3. After adding fuel, tighten the cap securely. Capacity of the fuel tank: 381 l

GK100259

3-49

3.3. Operation

Operation

Checking the control panel If the start switch is set to the ON operation position, all control and measuring instruments will light up briefly to indicate that they are properly functioning. Wait at least 30 seconds after switching off the engine before performing the control check. Set the start switch to ON position. Then, check if ●

all instruments and control/warning indicators light up for approx. 3 seconds,

●

the alarm buzzer produces an audible signal (approx. 1 second)

●

the speedometer displays the number '88'

●

the transmission shift indicator displays the number '8'

●

Turn the starting switch to the ON position. The electric emergency steering pump should start the test procedure, the red lamp (1) flashes and the green control lamp (2) lights up. The electric emergency steering pump switches off after about 6 seconds, the green control lamp (2) goes out and the red control lamp (1) continues flashing.

●

The yellow control lamp (3) for the central lubrication system lights up briefly and goes out again.

If you detect a malfunction, arrange an inspection with the relevant dealer. Before starting operation, do not rely only on checking the control panel. Perform always the specified maintenance steps in the defined intervals.

3-50

2 1

WORK MODE H S Ec

SPEED

CHECK CAUTION PARKING BRAKE

GK100260

Operation

3.3. Operation

Emergency steering system Always check function as follows before driving off: 1. Turn ignition switch to operating position "1“ (ON). The red control lamp (1) for steering lights up. The green control lamp (2) for emergency steering is off. A timing relay automatically switches the emergency-steering pump. The emergency-steering pump starts to buzz. The green control lamp (2) will light up as soon as th pressure has built up. After 6 seconds the timing relay switches off the emergency-steering pump, and the green control lamp goes off.

2 1 SPEED

WORK MODE H S Ec

CHECK CAUTION PARKING BRAKE

GK100260

2. Start engine. The red control lamp (1) for steering switch off. The green control lamp (2) for emergency steering remains off.

OFF

3. Drive with engine running. The red control lamp (1) for steering remains off. The green control lamp (2) for emergency steering remains off.

START

A0061160

WARNING ●

If the red control lamp (1) flashes whilst the engine is running there is a fault in the steering’s hydraulic circuit.

●

The emergency steering has been activated if the red control lamp (1) flashes and the green control lamp (2) lights up during drive. Stop the machine immediately and have the steering system checked by an authorised workshop.

Steering

Emergency steering

2 GK100343

3-51

3.3. Operation

Operation

Check oil level in engine oil pan, add oil 1. Open the engine side cover at the rear right side of the machine. 2. Remove dipstick (G) and wipe off the oil with a cloth. F 3. Insert dipstick (G) fully in the oil filler pipe, then take it out again.

4. The oil level should be between the H and L marks on dipstick (G). If the oil level is below the L mark, add engine oil through oil filler (F). For details of the recommended oil, see section "5.4.2. Lubricants, fuels and filling capacities" on page 5-13. 5. If the oil is above the H mark, drain the excess engine oil from drain plug (P), and check the oil level again. 6. If the oil level is correct, tighten the oil filler cap securely, then tighten the engine side cover. NOTE When checking the oil level after the engine has been operated, wait for at least 15 minutes after stopping the engine before checking. If the machine is at an angle, move it on level ground before checking the oil level.

AE061670

3-52

Operation

3.3. Operation

Check electric wiring

WARNING If fuses are frequently blown or if there are traces of short circuit on the electrical wiring, locate the malfunction and remove the end cause.

Check for damage of the fuses and any sign of disconnection or short circuit in the electric wiring. Check also for loose terminals and tighten any loose parts. Check the following points carefully. ●

Battery

●

Starting motor

●

Alternator

Please contact your Komatsu dealer for any questions and trouble-shooting.

WARNING Accumulation of flammable material (dead leaves, twigs, grass, etc.) around the battery may cause fire, so always check and remove such material.

When carrying out walk-around checks or checks before starting, always check for and remove any accumulation of flammable material around the battery. Checking the parking brake function

WARNING After pulling the parking brake lever, the brake function does not become effective until the parking brake pilot lamp lights up. Therefore, keep the brake pedal depressed.

Measurement conditions ●

Tire inflation pressure: as specified (see section "Tyre pressure" on page 3-101).

●

Road surface: Dry paved surface with 25% grade

●

Machine: Operating condition 25% GK100261

3-53

3.3. Operation

Operation

Measuring method 1. Start the engine, align the machine facing straight to the front, then drive the machine up a 25% grade with the bucket empty. 2. Depress the brake, stop the machine, return the directional lever to the neutral position and stop the engine. 3. Pull the parking brake lever, release the brake pedal slowly, and check whether the machine is held in position. Checking the brake function Drive the machine at a speed of 20 km/h (12.4 MPH) on a dry flat concrete road surface, and check whether the stopping distance is less than 5 m (16.4 ft). Check sound of horn and backup buzzer Check for flashing lamps, dirt and damage Check engine exhaust color and sound Check operation of gauges Check play of steering wheel and steering function Check direction of rear view mirror, check mirror for dirt or damage

3-54

25% GK100262

Operation

3.3. Operation

Adjustment before starting the operation Operator's seat

WARNING â&#x2014;?

Adjust the seat before starting the machine operation or when changing operators.

â&#x2014;?

Make sure that you can fully depress the brake pedal with your back against the seat backrest.

1 Weight adjustment The suspension system can be adjusted to the induvidial operators weight by turning the handwheel (1). 2 Longitudinal adjustment The position of the seat can be adjusted horizontally by pulling lever (2) and pushing the seat forward or backward. Releasing lever will lock the seat. 3/4 Adjustment of height and angle of inclination You may adjust the height and the angle of inclination with the levers (3) and (4). Pull up the spring-supported lever (3) while at the same time sitting down or relieving your weight from the front section of the seat to change the position of the front seat cushion. If you let lever (3) go, the adjusted height and inclination of the seat is automatically locked. Pull up the spring-supported lever (4) while at the same time sitting down or relieving your weight from the rear section of the seat to change the position of the rear seat cushion. If you let lever (3) go, the adjusted height and inclination of the seat is automatically locked.

7 1

4 3 2

GK100263

5 Safety belt anchorage 6 Backrest adjustment The position of the backrest can be adjusted by pulling lever (6) while a gentle load is applied to the backrest. Increasing or decreasing the load will bring the backrest to the required position. The backrest will be locked automatically if lever (6) is released. NOTE If the seat back is reclined too far, it may hit the rear glass; therefore, make sure it does not contact the glass. 7 Armrests The angle of inclination can be infinitely adjusted by turning the knurled button (7) at the front. The armrest should be folded up when getting in and out of the machine.

3-55

3.3. Operation

Operation

Adjusting the seat belt

WARNING ●

Before fitting the seat belt, check that there is no abnormality in the mounting bracket and mounting belt. If the belt is worn or damaged, replace it.

●

Always fasten the seat belt before starting the machine operation.

●

Always keep the seat belt fastened during the operation.

●

Do not twist the left or right side of the seat belt when fastening it.

Fastening and removing the belt Fasten the belt so that it is just tight but not too tight. 1. Sit down on the seat, depress the brake pedal fully, and adjust the seat so that your back is pressed against the backrest. 2. After adjusting the seat position, adjust teaser belt (1). Tighten the teaser belt and install it with no one sitting on the seat. 3. Sit on the seat, take buckle (2) and tongue (3) in your left and right hands, push tongue (3) into buckle (2), and pull the belt to check that it is securely locked. 4. Raise the flap of buckle (2) to release the belt. Adjust buckle and tongue so that the belt follows your body without twisting, and adjust the belt length so that the buckle is in the middle in front of your body.

3-56

3 1 2 AE061710

Operation

3.3. Operation

Adjusting the belt length To make the belt shorter: Pull the free end of the belt at the buckle end or tongue end.

AE061720

To make the belt longer: Set the belt holding the buckle or tongue end at right angles to the buckle or tongue, and pull.

AE061730

Adjusting the rear-view mirror Sit in the operator's seat and adjust the rear-view mirror to the desired position.

GK100264

3-57

3.3. Operation

Operation

Operations and checks before starting the engine

5 3

WARNING â&#x2014;?

â&#x2014;?

If either the control levers or the multi-function control lever are accidentally touched, the work equipment may move suddenly. When leaving the operator's compartment, always set the safety lever to the LOCK position.

4 1

Before starting the engine, use a damp cloth to wipe off the dust accumulated on top of battery, starting motor and alternator.

GK100265

5 3 4

GK100266

5 4

3 1 2

GK100267

1. Check that parking brake lever (1) is pulled. The pilot lamp for the parking brake is on. 1

GK100239

3-58

Operation

3.3. Operation

2. Check that either the directional lever (2) or the directional switch (2) is set to the 'N' position. If directional lever (2) or the directional switch (2) is not set to 'N' the engine will not start. Position 1

Forward drive

Position N

Neutral

Position 2

Reverse drive

1 N 2 AE061330

N 2

GK100235

3. Insert the key in starter switch (5), turn the key to the ON position, and make sure that the pilot lamp lights up.

OFF ON

START

AE061780

3-59

3.3. Operation

Operation

3.3.2. Starting the engine CAUTION Make sure that there are no persons or obstacles in the direct vicinity of the machine, then sound the horn and start the engine.

OFF ON

NOTE START

Do not operate the starter for more than 20 seconds. If the engine does not start, wait for at least 2 minutes before trying to start the engine again.

GK100270

1. Turn the key in the starter switch to ON. Preheating will start automatically and the preheating control lamp (2) will light up. The preaheating time required before start-up may vary, depending on the water temperature of the engine.

2 SPEED

WORK MODE H S Ec

CHECK CAUTION PARKING BRAKE

GK100260

2. Lightly depress the accelerator pedal (3). 3

AE061760

3. Check that the preheating control lamp (2) is out, then turn the starter key to the START position to start the engine.

OFF ON

START

GK100271

3-60

Operation

4. When the engine is started, release the key; it will automatically return to ON.

3.3. Operation

OFF ON

START

AE061780

3-61

3.3. Operation

Operation

3.3.3. Operation and checks after starting the engine After starting the engine, do not immediately start the machine operation. First carry out the following operations and checks. Select the work mode with the switch (1) H

(High)

● ● ●

(Standard)

● ●

(Economy)

● ● ●

high loading performance short loading cycles max. breakout / lifting forces

H (1)

WORK MODE H S Ec

S Ec

load and carry road driving load and carry road driving low fuel consumption

GK100241

NOTE Do not suddenly accelerate the engine before the warmingup operation is completed. Do not run the engine at low idling or high idling continuously for more than 20 minutes. If it is necessary to run the engine at idling, apply a load from time to time or let the engine run at medium speeds. 1. Depress accelerator pedal (1) lightly and run the engine with no load at medium speed for about 5 minutes. 1

GK100266

3-62

Operation

2. To warm up the hydraulic oil in cold areas, proceed as follows: During the warm-up make sure that the engine rotation is smooth, then set the safety lock of the work equipment control lever to the FREE position (2) and move either the bucket control lever or the multi-function control lever in and out of the TILT (E) position to warm up the hydraulic oil. The relief time at the tilt position should not exceed 10 seconds. In this way, the oil will reach the relief pressure which will warm up the hydraulic oil more quickly.

3.3. Operation

GK100274

GK100275

GK100276

3. After carrying out the warming-up operation, check that all gauges and warning lamps are normal.

If there is any abnormality, carry out maintenance or repair. Run the engine under a light load until engine water temperature gauge (2) and the torque converter oil gauge (3) have entered the green range. 4. Make sure that there is no abnormality in the exhaust color, sound, or vibration. In case of any abnormality, carry out maintenance or repair.

AE060954

3-63

3.3. Operation

Operation

3.3.4. Driving the machine Driving the machine in road traffic using the steering wheel WARNING Before starting up, make sure that the area all round the machine is clear. Sound the horn before pulling away. People must not be loitering within the area around the machine. There is a â&#x20AC;?blind spotâ&#x20AC;? for the operator behind the machine, an area which cannot be seen in the rearview mirror. For this reason, take absolute care when reversing.

Set the transmission cut-off (1) to OFF when starting the machine on a slope.

WORK MODE H S Ec

SPEED

CHECK CAUTION PARKING BRAKE

1 GK100260

1. Start the engine and move the work unit into the transport position. Raise the boom until the two markings (red arrow) are parallel to each other.

GK100279

2. Turn the arresting lever for the hydraulic operating system to position '1'.

GK100215

3-64

Operation

3.3. Operation

3. Press down the right brake pedal (5) and release the parking brake (6). Do not release pressure on the right brake pedal (5).

GK100265

4. Shift the gear lever (7) to the required gear. 7

AE061830

5. Shift the travel direction lever on the steering wheel or the travel direction switch on the multifunction lever to the required travel direction. Position 1

Forward drive

Position N

Neutral

Position 2

Reverse drive

1 N 2 AE061330

N 2

GK100235

3-65

3.3. Operation

6. Release the right brake pedal (5) and press down on the accelerator (3) in order to start the machine moving.

Operation

5 3

AE061840

3-66

Operation

3.3. Operation

Driving the machine on site using the steering wheel 1. Start the engine, press down the right brake pedal (5) and release the parking brake (6). Do not release pressure on the right brake pedal (5).

GK100265

2. Shift the gear lever (7) to the required gear. 7

AE061830

3. Shift the travel direction lever on the steering wheel or the travel direction switch on the multifunction lever to the required travel direction. Position 1

Forward drive

Position N

Neutral

Position 2

Reverse drive

1 N 2 AE061330

N 2

GK100235

3-67

3.3. Operation

4. Release the right brake pedal (5) and press down on the accelerator (3) in order to start the machine moving.

Operation

5 3

AE061840

3-68

Operation

3.3. Operation

Driving the machine with joystick steering (option) on site Single lever / Dual lever pilot control

DANGER Joystick steering is not permitted in road traffic!

WARNING ●

Joystick steering can only be activated if the 20 kph restrictor switch has been switched on before starting the machine.

●

The travel direction is selected with the joystick.

●

The steering wheel remains active while joystick steering is switched on, however, joystick steering has priority over the steering wheel!

●

Joystick steering is switched off if the travel direction lever (1) on the steering column is activated.

●

The permitted maximum speed when using the steering joystick is 20 kph.

GK100236

GK100237

1. Fold the arm-rest with mounted steering joystick down fully. NOTE Joystick steering cannot be activated until the armrest with the mounted steering joystick has been folded down completely.

2. Set the travel direction lever on the steering column to neutral (N).

1 N 2 AE061330

3-69

3.3. Operation

Operation

3. Set the joystick to neutral (N).

4. Turn on the 20 kph restrictor switch â&#x20AC;&#x201C; on the left of the steering column beneath the steering wheel. Push the lock catch (2) to the side, press the selector switch (3) and release the lock catch.

5. Start the engine and press the green switch (4) on the housing of the steering joystick. Joystick steering (5) is activated if the indicator lamp in the switch lights up.

NOTE

Joystick steering (5) is switched off if the indicator lamp in the red switch lights up.

6. Press down the right brake pedal (5) and release the parking brake (6). Do not release pressure on the right brake pedal (5).

3-70

GK100265

Operation

3.3. Operation

7. Shift the gear lever (7) to the required gear. 7

AE061830

8. Select travel direction using the joystick. Position V

Forward drive

Position N

Neutral

Position R

Reverse drive

9. The machine is steered by moving the joystick to the left (L) or right (R). If the joystick is released, it returns automatically to the neutral position (N); the current steering angle, however, is retained. Position L

Left

Position N

Neutral

Position R

Right

10. Release the right brake pedal (5) and press down on the accelerator (3) in order to start the machine moving.

5 3

AE061840

3-71

3.3. Operation

Operation

Pilot control multi-function lever

DANGER Joystick steering is not permitted in road traffic!

WARNING ●

The travel direction is selected with the travel direction switch (1) on the multifunction lever.

●

The steering wheel remains active while joystick steering is switched on, however, joystick steering has priority over the steering wheel!

●

Lever steering can only be activated if the 20 kph restrictor switch (3) has been switched on. The maximum permitted speed when using the lever steering is 20 kph.

GK100235

1. Fold the arm-rest with mounted steering joystick down fully. NOTE Joystick steering cannot be activated until the armrest with the mounted steering joystick has been folded down completely.

2. Set the travel direction switch (1) on the multifunction lever to neutral (N).

GK100235

3-72

Operation

3.3. Operation

3. Turn on the 20 kph restrictor switch â&#x20AC;&#x201C; on the left of the steering column beneath the steering wheel. Push the lock catch (2) to the side, press the selector switch (3) and release the lock catch.

4. Start the engine and press the green switch (4) on the housing of the steering joystick. Joystick steering (5) is activated if the indicator lamp in the switch lights up.

NOTE

Joystick steering (5) is switched off if the indicator lamp in the red switch lights up.

5. Press down the right brake pedal (5) and release the parking brake (6). Do not release pressure on the right brake pedal (5).

GK100265

6. Shift the gear lever (7) to the required gear. 7

AE061830

3-73

3.3. Operation

Operation

7. Select travel direction using the travel direction switch on the multifunction lever. Position V

Forward drive

Position N

Neutral

Position R

Reverse drive

N R

GK100235

8. The machine is steered by moving the joystick to the left (L) or right (R). If the joystick is released, it returns automatically to the neutral position (N); the current steering angle, however, is retained. Position L

Left

Position N

Neutral

Position R

Right

9. Release the right brake pedal (5) and press down on the accelerator (3) in order to start the machine moving.

5 3

AE061840

3-74

Operation

3.3. Operation

3.3.5. Gear change CAUTION If travelling at high speed, never change into a lower gear suddenly. Always reduce travel speed first using the brakes and then change into the lower gear according to speed.

GK100265

Gear selection To change gear, push the gear-change lever (1) to the required position. Excavation and loading work may only be performed in 1st and 2nd gear. For this reason, activate the gear lock lever.

1st 2nd 3rd Lever stopper

4th

GK100245

Automatic gear change This machine has an automatic shift for 2nd, 3rd and 4th gears. The control unit for the transmission automatically changes into the appropriate gear for operating conditions. 1st gear is not selected automatically. Automatic Gearshift Scheme

Automatic gearshift

1st gear fixed

2nd gear fixed

2nd and 3rd gear fixed

2nd, 3rd and 4th gear

Pos. of Gearshift Lever

Position of the gearshift lever

1 2

The diagram (right) shows the possible automatic gear changes for each respective position of the gear-change lever.

3-75

3.3. Operation

Operation

Kickdown gear change The machine is fitted with a kickdown gear change which increases thrust when carrying out excavation or loading work. If you are driving in 2nd gear, you can activate the kickdown function by pressing the button (1) on the top of the control lever for the work hydraulic system. If your machine is fitted with a multifunction control lever, you can activate the kickdown function by pressing the toggle switch at the front of the multi-function control lever to position â&#x20AC;&#x153;1â&#x20AC;?. The transmission changes to 1st gear as soon as you activate the kickdown function. The switch (1) for the kickdown function is described in more detail see item "11. Kickdown function (1)" on page 3-24. Automatic gear change is not possible if you are already in 1st gear when you activate the kickdown function. The machine remains in 1st gear. If you are driving in 2nd, 3rd or 4th gear when you activate the kickdown function, the transmission only changes into 1st gear when your speed has reduced to below 12 kmh.

GK100236

To switch off the kickdown function, push either the directional lever or the directional switch through neutral into the reverse or forward drive position or select any other gear (excluding 2nd gear) with the gear-change lever.

GK100237

GK100447

NOTE If the transmission is shifted from 4th, 3rd or 2nd gear into 1st gear after activating the kickdown lever (1), it will change gear upwards again when speed is increased.

1st 2nd 3rd 4th

3-76

GK100245

Operation

3.3. Operation

Gear-change lock If you are driving up or downhill, or carrying out work which should only be carried out in a specific gear, you should use the gearchange lock. As soon as you activate the gear-change lock, the selected gear is retained even if you increase engine speed to a level where the automatic transmission would normally change into a higher gear.

Gear-change lock on 1. Select the required gear. GK100236

2. Start the machine and increase speed until the selected gear is shown on the gear shift display. 3. Press the switch (2) for the gear-change lock. The gearchange lock is now switched on and the control lamp for the gear-change lock is lit. If your machine is fitted with a multi-function control lever, you can switch the gear-change lock on by pressing the toggle switch at the front of the multi-function control lever to position “2”. The gear-change lock is now switched on and the control lamp for the gear-change lock is lit.

GK100237

If your machine is fitted with a multi-function control lever, you can switch the gear-change lock off by pushing the toggle switch at the front of the multi-function control lever to position “2” again. The gear-change lock is now switched off again and the control lamp for the gear-change lock goes out. The switch for the gear-change lock is described in more detail see item "12. Gear-change lock (2)" on page 3-25.

GK100447

Priority gear change In addition to its gear-change function, the automatic shift also has the task of protecting the machine and its transmission. This protective function has priority over the kickdown function. If the gear-change lever is shifted into a lower gear when driving downhill, the transmission shifts immediately into a lower gear so that the braking effect of the engine can be used as well. Exceptions in shifting behaviour depend on the travel speed, engine speed and the position of the gear lever and directional lever or direction al switch. Please contact your Komatsu dealer if you need any further information.

3-77

3.3. Operation

Operation

3.3.6. Changing direction CAUTION â&#x2014;?

â&#x2014;?

When changing the direction from FORWARD to REVERSE and vice versa, check that the new travelling direction is safe. There is a blind spot behind the machine, so be particularly careful when travelling backwards.

Do not switch between FORWARD and REVERSE when travelling at high speed. In this case, depress the brake to reduce the travelling speed sufficiently, then change the direction of travel (max. speed for changing direction: 12 km/h (7.5 MPH). GK100265

GK100267

There is no need to stop the machine when switching from FORWARD to REVERSE or vice versa. Set the directional lever (1) to the desired position. If your machine is equipped with a multifunction control lever, set the directional switch (1) to the required position. Position 1

Forward drive

Position N

Neutral

Position 2

Reverse drive

1 N 2 AE061330

N 2

GK100235

3-78

Operation

3.3. Operation

3.3.7. Turning and steering WARNING ●

It is dangerous to turn the machine suddenly at high speed, or to turn on steep hills.

●

If the engine stops when the machine is travelling, the steering becoms inoperable. This is particularly dangerous on hills; so never stop the engine when the machine is travelling. If the engine stops, immediately stop the machine at a safe place.

AE061860

3.3.8. Stopping the machine WARNING ●

Avoid stopping suddenly. Give yourself ample room when stopping.

●

Do not park the machine on slopes. If the machine has to be parked on a slope, set it facing straight down the slope, then dig the bucket into the ground and place blocks under the tires to prevent the machine from moving.

●

If either the control lever or the multi-functional lever is touched accidentally, the work equipment or the machine may move suddenly, which may lead to a serious accident. Before leaving the operator's compartment, always set the safety lock lever to the LOCK position.

Blocks Thrust the bucket

GK100287

3 ●

Even if the parking brake lever is pulled the brake may not be effective until the parking brake pilot lamp lights up; therefore, keep the brake pedal depressed. 4

NOTE Never use the parking brake lever to decelerate the machine when travelling except in an emergency. Apply the parking brake only after the machine has stopped.

GK100265

3 4 GK100267

3-79

3.3. Operation

Operation

1. Release accelerator pedal (1), and depress brake pedal (2) to stop the machine. 2. Set either the directional lever (3) or the directional switch (3) to 'N' (neutral). Position 1

Forward drive

Position N

Neutral

Position 2

Reverse drive

1 N 2 AE061330

N 2

GK100235

3. Pull up parking brake lever (4) to apply the parking brake. NOTE When the parking brake is applied, the transmission is automatically reset to neutral.

GK100239

3-80

Operation

3.3. Operation

3.3.9. Operating the work equipment Mono lever control 1 The control lever for operating the work hydraulic system is used to control the work equipment.

2 3

Lift arm operation 1

RAISE

HOLD

LOWER

FLOAT

4 GK100292

The lift arm is kept in the set position. 1

The lift arm moves freely under external force.

When the lift arm control lever is pulled up further from the raise position, it is stopped in this position until the lift arm reaches the preset kick-out position; then the lever returns to the hold position.

AE061380

NOTE Do not use the FLOAT position to lower the bucket.

7 6

Bucket operation 5

TILT

HOLD

DUMP

The bucket is kept in the set position. GK100246

When the bucket control lever is pulled up further from the tilt position, it is stopped in this position until the bucket reaches the preset position of the positioner; before it returns to the hold position.

AE061360

3-81

3.3. Operation

Operation

Two lever control Lift arm control lever (1) and bucket control (2) lever are used to operate the lift arm and bucket as follows.

2 1

GK100266

Lift arm operation (control lever 1) 1 1

RAISE

HOLD

LOWER

FLOAT

m n

2 3 The lift arm is kept in the set position. 4

o k

AE061370

The lift arm moves freely under external force.

NOTE Do not use the FLOAT position to lower the bucket.

3-82

AE061380

Operation

3.3. Operation

Bucket operation (control lever 2) 1 1

TILT

HOLD

DUMP

2 3 The bucket is kept in the set position.

AE061350

AE061360

3-83

3.3. Operation

Operation

Operating the work equipment (multi-function control lever) The multi-function control lever is a special accessory for controlling the work equipment. Boom operation SW Float

Lower Hold

Raise

n m

GK100293

AE061380

NOTE Do not use the swim position “SW” to lower the bucket. Bucket operation E

Tilt

Stop

Dump

If the multi-function control lever is pulled further in the tip-in direction “E”, the lever locks into position until the bucket reaches the pre-set position of the automatic digging angle. The multi-function control lever then returns automatically to the stop position “0”. GK100294

The boom stops in its present position.

If the multi-function control lever is pulled further to the left of the tip-in position, it locks in this position. The lever returns to the stop position when the bucket reaches the pre-set shut-off position.

NOTE The work unit must not be used to lift heavy loads off-balance (i.e. only on one side).

3-84

AE061360

Operation

3.3. Operation

3.3.10. Wheel loader operations In addition to the following, it is possible to further increase the range of applications by using various attachments.

Digging CAUTION Always set the machine facing straight to the front when carrying out digging or scooping operations. Never perform these operations with the machine articulated.

NOTE Slipping of the tires slip in operation reduces the tire life! When loading piled soil or blasted rock, drive the machine forward and observe the following points to prevent cutting of the tires caused by slipping: Always keep the site flat, and remove any fallen rocks. When working with stockpiles, operate the machine in 1st or 2nd gear; when loading blasted rock, operate the machine in 1st gear. 1. When driving the machine forward and lowering the bucket, stop the bucket about 30 cm (11.8 in) above the ground, then lower it slowly. NOTE If the bucket hits the ground, the front tyres will come off the ground, and the tires will slip.

30 cm

GK100297

2. Shift down immediately in front of the material to be loaded. Then completing the shift down, depress the accelerator pedal and dig the bucket into the load.

GK100295

3-85

3.3. Operation

Operation

3. When the material is stockpiled, keep the cutting edge of the bucket horizontal; when loading blasted rock, have the bucket tilt slightly down. Be careful not to get blasted rock under the bucket. This will make the front tires come off the ground and slip. Try to keep the load in the center of the bucket; if the load is on one side of the bucket, it will be unbalanced.

GK100296

4. At the same time as thrusting the bucket into the material, raise the lift arm to prevent the bucket from digging in too far. By raising the lift arm, the front tires will have enough traction.

AD061910

5. Check that there is enough material loaded into the bucket, then operate the bucket control lever to tilt the bucket and load it fully. NOTE If the bucket edge is moved up and down while pushing in the bucket and digging, the front tires will come off the ground causing the tires to slip. AD061920

If there is too much material loaded in the bucket, dump and tilt the bucket quickly to remove the excessive load. This prevents spillage of the load during hauling.

AD061930

3-86

Operation

3.3. Operation

When digging and loading on level ground, set the bucket edge slightly facing down as described below and drive the machine forward. Always be careful not to load the bucket on one side thus causing an unbalanced load. This operation should be carried out in 1st gear. 1. Set the edge of the bucket facing down slightly.

AE061940

2. Drive the machine forward and operate the lift arm control lever forward to cut a thin layer off the surface each time when excavating the soil.

AE061950

3. Operate the lift arm control lever slightly up and down to reduce the resistance when travelling the machine forward. When digging with the bucket, avoid applying the digging force onto one side of the bucket only.

AE061960

3-87

3.3. Operation

Operation

Levelling NOTE Always operate the machine in reverse when carrying out levelling operations. If it is necessary to perform levelling works when travelling forward, do not set the bucket dumping angle to more than 20°. 1. Scoop soil into the bucket. Move the machine backward while spreading soil from the bucket little by little. 2. Go over the spread soil with the bucket teeth touching the ground and level the ground by back-dragging. 3. Scoop some more soil into the bucket, set the lift arm to float position, level the bucket at ground level, and smooth the ground by moving backward. 4. Make sure that you have got clear sight behind you.

AE061970

Pushing NOTE Never set the bucket to the DUMP position when carrying out pushing operations. When carrying out pushing operations, set the bottom of the bucket parallel to the ground surface.

Load-and-carry operations CAUTION When carrying a load, lower the bucket to lower the center of gravity when travelling.

The load-and-carry method for wheel loaders consists of the following cycle: scooping ➔ hauling ➔ loading (into a hopper, glory hole, etc.) Always keep the travel path in proper condition. For using the load-and-carry method, see section "3.3.17. Tyre handling" on page 3-101.

3-88

AE061980

Operation

3.3. Operation

Loading Select an operating mode which involves the least amount of turning and travelling in order to carry out works at the site efficiently.

WARNING ●

Always keep the working area flat. Do not turn suddenly or apply the brake suddenly when travelling with a raised load. These actions are dangerous.

●

It is also dangerous to drive the bucket into a stockpile or pile of rocks at a high speed.

NOTE ●

Slipping of the tires reduces the tire life! Therefore, avoid any slippage during operation.

●

Avoid excessive shaking of the bucket.

Cross drive loading Always set the wheel loader at right angles to the stockpile. After digging in and scooping up the load, drive the machine straight back in reverse gear, then move the dump truck between stockpile and wheel loader. This method requires the least time for loading and reduces cycle times considerably.

AE061990

V-shape loading Position the dump truck so that the approach direction of the wheel loader to the truck is approx. 60° apart from the approach direction to the stockpile. After loading the bucket, drive the wheel loader in reverse, then turn it to face the dump truck and travel forward to load the dump truck. The smaller the turning angle of the wheel loader, the more efficient the operation. When loading a full bucket and raising it to the maximum height, first shake the bucket to stabilize the load before raising it. This will prevent the load from spilling to the rear.

AE062000

3-89

3.3. Operation

Operation

Precautions when piling up loads When piling up products, be careful not to let the rear counterweight come into contact with the ground. Do not set the bucket to the DUMP position when carrying out piling-up works.

AE062010

3-90

Operation

3.3. Operation

3.3.11. Precautionary measures during operation Permissible water depth When working in water or on swampy ground, the water may not reach above the bottom of the axle housing.

Axle housing

After finishing the operation, wash the machine and check the lubricating points.

GK100298

If wheel brake fails to work If the machine does not stop after depressing the brake pedal, use the parking brake instead. NOTE If the parking brake has been used as an emergency brake, contact your Komatsu distributor to have the parking brake checked for any abnormality.

3-91

3.3. Operation

Precautionary measures when driving up or down Lower the centre of gravity when turning When turning on slopes, lower the work equipment to lower the center of gravity before turning. It is dangerous to turn the machine with the work equipment raised. Braking on downhill slopes If the service brake is used too frequently when travelling downhill, the brake may overheat and become damaged. To avoid this problem, shift down to a low gear and make full use of the braking force of the engine. For braking, use the right brake pedal. If the speed control lever is not placed in a proper speed position, the torque converter oil may overheat. In this case, place the speed control lever to the next lower speed to lower the oil temperature. If the temperature does not lie within the green range of the scale even with the lever in the 1st speed position, stop the machine, place the lever in neutral, and run the engine at medium speed until the gauge re-enters the green range. If engine stops If the engine stops on a slope, depress the right brake pedal fully. Then, lower the work equipment to the ground and apply the parking brake. Set the directional and speed control levers to neutral, and restart the engine. (If the directional lever is not in neutral, the engine will not start.)

3-92

Operation

3.3. Operation

Precautionary measures during machine travel When the machine travels at high speed for a long distance, the tyres become extremely hot. This causes premature wear and tear of the tyres, which should be avoided as far as possible. If the machine must be driven over a long distance, take the following precautions: ●

Adhere to the traffic regulations which are relevant for this machine, and drive carefully.

●

Before driving the machine, perform all pre-start checks.

●

The most suitable tyre pressure, travelling speed, or tyre type may differ, depending on. Refer to section "Tyre pressure" on page 3-101 to determine the right tyre pressure required for your purpose. Contact your Komatsu distributor or tire dealer for information.

●

Check the tyre pressure before starting, when the tyres are cool.

●

After travelling for 1 hour, stop for 30 minutes. Check the tyres and other parts for damage; also check the oil and coolant levels.

●

Always travel with the bucket empty.

●

Never put ballast in the tyres when travelling.

3-93

3.3. Operation

Operation

3.3.12. Adjusting the position of the work equipment WARNING ●

Stop the machine on flat ground and put blocks in front of and behind the wheels.

●

Apply the parking brake.

●

Secure the front and rear frames with the safety bar.

●

Do not stand or go under the work equipment with the arm raised.

The boom kickout makes it possible to set the bucket so that it automatically stops at the desired lifting height (lift arm higher than horizontal) and the bucket positioner makes it possible to set the bucket so that it automatically stops at the desired digging angle. The setting can be adjusted to match the working conditions.

Adjusting the boom kickout 1. Raise the bucket to the desired height, set the lift arm control lever to HOLD and lock the lever in position. Then stop the engine and adjust as follows: 2. Loosen two bolts (1), and adjust plate (2) so that the bottom edge is in line with the center of the sensing surface of proximity switch (3). Then tighten the bolts to hold the plate in position. 3. Loosen two nuts (4) to give a clearance of 3 to 5 mm (0.12 to 0.20 in) between plate (2) and the sensing surface of proximity switch (3). Then re-tighten the nuts. Tightening torque: 15 - 20 Nm 4. After the adjustment, start the engine and operate the lift arm control lever. Check that the lever is automatically returned to HOLD when the bucket reaches the desired height. 5. Check the bucket position indicator.

3-94

2 1

AE062030

Operation

3.3. Operation

Adjusting the bucket positioner 1. Lower the bucket to the ground and set the bucket to the desired digging angle. Set the bucket control lever to HOLD, stop the engine and adjust as follows: 2. Loosen two bolts (1) and adjust mounting bracket (4) of the proximity switch so that the rear tip of angle (2) is in line with the center of the sensing surface of proximity switch (3). Then tighten the bolts to hold the bracket in position. 3. Loosen two nuts (5) and adjust to make a clearance of 3 to 5 mm (0.12 to 0.20 in) between bar (2) and the sensing surface of proximity switch (3). Then re-tighten the nuts.

2 5 1

4 GK100299

Tightening torque: 15 - 20 Nm 4. After the adjustment, start the engine and raise the lift arm. Operate the bucket control lever to the DUMP position, then operate it to the TILT position and check that the bucket control lever is automatically returned to HOLD when the bucket reaches the desired angle.

Bucket level indicator At the top rear of the bucket are the level indicators, so the bucket angle can be checked in operation. A

In parallel to the cutting edge

90Â° to cutting edge

A B

AE062050

3-95

3.3. Operation

Operation

3.3.13. Parking the machine WARNING ●

Avoid stopping suddenly. Give yourself ample room when stopping.

●

Do not park the machine on slopes. If the machine has to be parked on a slope, set it facing straight down the slope, then dig the bucket into the ground and put blocks under the tires to prevent the machine from moving.

●

If either the control lever or the multi-function control lever is touched accidentally, the work equipment or the machine may move suddenly, and this may lead to a serious accident. Before leaving the operator's compartment, always set the safety lock lever to the position '1'.

●

Blocks Thrust the bucket

GK100287

Even if the parking brake lever is pulled it may not become effective until the parking brake pilot lamp lights up. Therefore, keep the brake pedal depressed.

5 NOTE Never use the parking brake lever to brake the machine when travelling except in an emergency. Apply the parking brake only after the machine has stopped.

GK100267

1. Release accelerator pedal (1), and depress brake pedal (2) to stop the machine.

GK100397

3-96

Operation

3.3. Operation

2. Set either the directional lever (3) or the directional switch (3) to N (neutral). Position 1

Forward drive

Position N

Neutral

Position 2

Reverse drive

1 N 2 AE061330

N 2

GK100235

3. Pull parking brake lever (4) to ON to apply the parking brake. NOTE When the parking brake is applied, the transmission is automatically returned to neutral.

OFF

ON 1 2

GK100239

3-97

3.3. Operation

Operation

4. Operate either lift arm and bucket control lever (5) or multifunction control lever (5) to lower the bucket to the ground. Hold Lower

GK100301

GK100247

5. Lock either lift arm and bucket control lever (5) or multi-function control lever with safety lock (7).

1 GK100215

3-98

Operation

3.3. Operation

3.3.14. Stopping the engine NOTE If the engine is abruptly stopped before it has cooled down, engine life may be greatly shortened. Consequently, do not abruptly stop the engine apart from an emergency. In particular, if the engine has overheated, do not abruptly stop it but run it at medium speed to allow it to cool gradually, then stop it. 1. Run the engine at low idling speed for about 5 minutes to allow it to cool down gradually. 2. Turn the key in the starter switch (1) to the OFF position and stop the engine.

3. Remove the key from the starter switch (1).

GK100265

OFF ON

START

GK100303

3-99

3.3. Operation

Operation

3.3.15. Check after stopping the engine 1. Walk around the machine and check the work equipment, body work, and undercarriage, and check also for leakage of oil and water. If any leakage or abnormality is found, carry out repairs. 2. Fill the fuel tank. 3. Remove any waste paper or dead leaves from inside the engine room. These may cause a fire. 4. Remove any mud stuck to the undercarriage.

3.3.16. Locking Always lock the following places: 1

Fuel tank filler cap

Engine side panel (left, right)

Cab door

NOTE The starter switch key is also used for locks (1), (2) and (3).

3 2

GK100304

3-100

GK100305

Operation

3.3. Operation

3.3.17. Tyre handling Precautionary measures when handling tyres If the following defects are found in tyres, they must be replaced for safety reasons. ●

Bead wire is broken or bent, or the tyre is greatly deformed.

●

Excessive wear and the carcass ply (excluding breaker) is exposed for more than 1/4 of the circumference.

●

Damage to the carcass exceeds 1/3 of the tire width.

●

Tyre layers are separated.

●

Radial cracks reach the carcass.

●

Deformation or damage which makes the tyre unsuitable for use.

Tread Breakers

Sidewalls

Carcass

GK100306

Tyre pressure Measure the tyre pressure before starting the machine operation, when the tyres are cool. If the tyre inflation pressure is too low, there will be overload; if it is too high, it will cause tyre cuts and shock burst. To prevent these problems, adjust the tyre inflation pressure according to the table on the next page. ●

For operations on normal road surfaces, rock digging operations: ____________ Upper range values in air pressure chart

●

Stockpile operations on soft ground: ____________ Average pressure values in air pressure chart

●

Operations on sand (operations not using much digging force) ____________ Lower range values in air pressure chart

H–h Deflection ratio = ------------- × 100 H

As a guideline for visual inspection, the deflection ratio of the front tyre (deflection/free height) is as follows: When carrying normal load (lift arm horizontal): approx. 15 - 25% When digging (rear wheels off ground): approx. 25 - 35% When checking the tyre inflation pressure, check also for small scratches or peeling of the tire, for nails or pieces of metal which may cause punctures, and for any abnormal wear.

3-101

3.3. Operation

Operation

Clearing fallen stones and rocks from the working area and maintaining the surface will extend the tyre life and improve the economical case of the machine. RECOMMENDED AIR PRESSURE TIRES For road use Manufacturer

Size

Type

EMCode

For work conditions

Front axle

Rear axle

Front axle

Rear axle

bar

psi

bar

psi

bar

psi

bar

psi

DUNLOP

26.5 R 25

SPT 8S

3,5

1,5

DUNLOP

26.5 R 25

SPT 7 LD

3,5

1,5

DUNLOP

26.5 - 25

PG6S 20PR

43,5

1,5

DUNLOP

26.5 - 25

PG9SD 24PR

1,5

43,5

1,5

MICHELIN

26.5 R 25

XHA

3,75

MICHELIN

26.5 R 25

XRD 1A

3,75

MICHELIN

26.5 R 25

XLD D2

3,75

GOODYEAR

26.5 R 25*

RL-2+

3,75

2,75

3,75

2,75

GOODYEAR

26.5 R 25*

GP-2B

3,75

2,75

3,75

2,75

GOODYEAR

26.5 R 25*

RL-SK

3,75

2,75

3,75

2,75

Correct inflation pressure levels have a significant impact on the service life and efficiency of the tyres. Only correct inflation pressures protect the tyres from getting damaged. Should the pressure rise as a result of heating, do not deflate the tyres. Check and adjust inflation pressures before moving off, i.e.., with the tyres cold. In extremlely severe applications and in load and carry applications involving lenghty hauls, the correct inflation pressure should be determined by the respective tyre manufacturer or an authorised service outlet on the spot. If the deflection of the tyre is excessive, raise the inflation pressure accordingly (see section "Tyre pressure" on page 3-101).

3-102

Operation

3.4.

3.4. Transport

Transport

When transporting the machine, observe all related laws and regulations, and be careful to assure safety.

3.4.1. Loading, unloading WARNING ●

Make sure that the ramp is sufficient with respect to width, length and carrying capacity to enable the machine to be safely loaded and unloaded.

●

When loading and unloading the machine, park the trailer on a flat firm roadbed. Keep a fairly long distance between the road shoulder and the machine.

●

Remove the mud from the undercarriage to prevent the machine from slipping to the side on slopes. Be sure the ramp surface is clean and free of grease, oil ice and loose material.

●

Never change the direction of travel when on the ramp. If it is necessary to change direction, drive off the ramp and correct the direction, then remount the ramp.

When loading or unloading, always use ramps or a platform and proceed as follows: 1. Properly apply the brakes on the trailer and place blocks beneath the tyres (see fig.) to ensure that it does not move. Then fix the ramps in line with the centres of the trailer and the machine. Be sure that both sides are on the same level. If the lamp sags visibly, reinforce it with blocks, etc.

CORRECT

Ramp

2. Determine the direction of the ramp, then slowly load or unload the machine. NOTE When the transmission cut-off switch is set to OFF, the left brake pedal and accelerator pedal are operated at the same time.

Blocks Max 15° Block Distance between ramps GK100307

3. Correctly move the machine onto the specified part of the trailer.

3-103

3.4. Transport

Operation

3.4.2. Precautions for loading After loading the machine in the specified position, secure it in place as follows: 1. Lower the work equipment slowly. 2. Apply the safety lock to lock all the control levers securely. 3. Turn the start switch to the OFF position and stop the engine. Pull off the key from the start switch. 4. Lock front frame and rear frame with safety bar. 5. Put blocks in front of and behind the wheels, and secure the machine with chains or wire rope to prevent it from moving during transport. 6. Always retract the car radio antenna fully.

3.4.3. Precautions during transport WARNING Determine the route for transporting the machine taking into account the width, height and weight of the machine.

â&#x2014;?

Note that, while driving on public roads, the machine is subjected to traffic regulations.

â&#x2014;?

Determine the transport route with respect to the width, length and weight of the load. If required, ask the relevant authorities for permission.

3-104

Operation

3.5.

3.5. Cold weather operation

Cold weather operation

3.5.1. Precautions for low temperatures Under low temperatures, the engine is difficult to start and the coolant may freeze. In this case, proceed as follows:

Fuel and lubricants Use fuel and oil with low viscosity for all components which is suitable for low-temperature operation. For details of the specified viscosity, see section "5.4.2. Lubricants, fuels and filling capacities" on page 5-13.

Coolant WARNING Keep antifreeze fluid away from open fire. Never smoke when using antifreeze.

NOTE ●

Never use antifreeze on methanol, ethanol or propanol basis.

●

Absolutely avoid using any water leak preventing agent irrespective of wether it is used independently or mixed wih an antifreeze.

●

Do not mix different brands of antifreeze.

For details of the antifreeze mixture when changing the coolant, see section "5.8.2. Maintenance upon demand" on page 5-21. Use a Permanent Antifreeze (ethylene glycol mixed with corrosion inhibitor, antifoam agent, etc.) meeting the standard requirements as shown below. With permanent antifreezes, no change of coolant is required for one year. If it is doubtful that an available antifreeze meets the standard requirements, ask the supplier of that antifreeze for information. Standard requirements for permanent antifreeze ●

SAE

J1034

●

FEDERAL STANDARD

O-A-548D

NOTE Where no permanent antifreeze is available, an ethylene glycol antifreeze without corrosion inhibitor may be used only for the cold season. In this case, clean the cooling system twice a year (in spring and autumn). When refilling the cooling system, add antifreeze in autumn, but do not add any in spring. 3-105

3.5. Cold weather operation

Operation

Battery WARNING ●

To avoid gas explosions, do not bring fire or sparks near the battery.

●

Battery electrolyte is dangerous. If it gets in your eyes or on your skin, wash it off with large amounts of water, and consult a doctor.

When the ambient temperature drops, the capacity of the battery will also drop. If the battery charge ratio is low, the battery electrolyte may freeze. Maintain the battery charge as close as possible to 100%, and insulate it against cold temperature so that the machine can be started easily the next morning. NOTE Measure the specific gravity and calculate the rate of charge from the following conversion table:

Rate of charge

Temperature of fluid 20°C

0°C

-10°C

-20°C

100%

1.28

1.29

1.30

1.31

90%

1.26

1.27

1.28

1.29

80%

1.24

1.25

1.26

1.27

75%

1.23

1.24

1.25

1.26

3-106

Operation

3.5. Cold weather operation

3.5.2. Precautions after completion of work Always observe the following precautionary measures to prevent mud, water, or the undercarriage from freezing which would result in inhibiting the machine operation on the following morning: ●

Mud and water on the machine body should be completely removed. This is to prevent damage to the seal caused by the water in mud or dirt get inside the seal and freeze.

●

Park the machine on hard, dry ground. If this is impossible, park the machine on wooden boards. The boards help to protect the tracks from freezing in the soil so that the machine can start the next morning.

●

Open the drain valve and drain any water collected in the fuel system to prevent if from freezing.

●

As the battery capacity drops significantly in low temperatures, cover the battery or remove it from the machine, keep it in a warm place, and install it again the next morning.

3.5.3. After the cold weather period When season changes and the weather becomes warmer, proceed as follows: ●

Replace the fuel and oil for all parts with oil of the specified viscosity. For details, see section "5.4. Lubricants and operating means" on page 5-12.

●

If for any reason permanent antifreeze cannot be used, and an ethyl glycol based antifreeze (winter, one season type) is used instead, or if no antifreeze is used, drain the cooling system completely, then clean out the inside of the cooling system thoroughly, and fill with fresh water.

3-107

3.6. Long-term storage

3.6.

Operation

Long-term storage

3.6.1. Before storage When storing the machine for a long time, take the following precautions: ●

After every part is washed and dried, store the machine in a dry building. Never leave it outdoors. If the machine must be left outdoors, park it on well-drained concrete and cover it with canvas, etc.

●

Completely fill the fuel tank, lubricate, and change the oil before storage.

●

Apply a thin coat of grease to the metal surface of the hydraulic piston rods.

●

Disconnect the negative terminals of the battery and cover it, or remove it from the machine and store it separately.

●

If the ambient temperature is expected to drop below 0°C, always add antifreeze to the cooling water.

●

Apply the safety locks to the bucket control lever, lift arm control lever, and directional lever, then apply the parking brake.

3.6.2. During storage CAUTION If, for any reason, it is unavoidable to perform the rust-prevention operation indoors, open the doors and windows to improve ventilation and to prevent gas poisoning.

Operate the engine and move the machine over a short distance once a month so that a new film of oil will be applied to movable parts and component surfaces. At the same time, also charge the battery. Before operating the work equipment, wipe off the grease on the hydraulic piston rod.

3-108

Operation

3.6. Long-term storage

3.6.3. After storage NOTE If the machine is stored without performing the monthly rust prevention operation, call your Komatsu distributor for service. Carry out the following procedure before operating the machine after long-term storage: ●

Wipe off the grease from the hydraulic piston rods.

●

Add oil and grease to all places.

●

Check level of grease in grease reservoir, top up if necessary. See section "5.8.2. Maintenance upon demand" on page 5-21.

●

Start the engine and press the button (2) for the central lubrication system.

●

Check whether the pump for the central lubrication system is operating.

●

Upon completion of the lubrication process, check whether fresh grease has emerged at all lubrication points.

●

Repeat the lubrication process if necessary.

3-109

3.6. Long-term storage

3-110

Operation

Troubleshooting

4. Troubleshooting

4-1

4.1. When the machine runs out of fuel

4.1.

Troubleshooting

When the machine runs out of fuel WARNING

Fire risk! Spilled fuel may ignite! Remove carefully any spilled fuel.

Proceed as follows if the fuel tank is empty: 1. Fill up with fuel. 2. Open the right-hand engine cover plate.

3. Loosen the vent screw (2). 4. Loosen the feed pump knob (3) and move the pump up and down until bubble-free fuel comes out of the vent screw. 5. Retighten the vent screw. Then press down and retighten the knob of the feed pump. CAUTION Caution during turning the engine. It may start up after a few turns!

6. Set the key in the start switch to START position and start up the engine for 15-20 seconds. On no account activate the starter for longer than 20 seconds. Always wait for two minutes before restarting.

4-2

Troubleshooting

4.2.

4.2. Central lubrication system

Central lubrication system

4.2.1. No grease emerging at the lubrication points ●

Check level of grease in grease reservoir, top up if necessary.

●

Start a manual auxiliary lubrication process.

●

Switch ignition on and press button (2).

●

The stirrer in the grease reservoir rotates when the pump is switched on.

●

Check the distribution pipelines for leaks. Tighten any loose connections.

Please contact your local KOMATSU dealer if grease is still not emerging from the lubrication points.

4.2.2. The pump does not switch on ●

Check the fuses.

●

Check whether the electrical plug on the underside of the pump housing is connected tight with the power socket.

●

If necessary, turn bayonet connector clockwise.

●

Start a manual auxiliary lubrication process. Switch ignition on and press button (2).

Please contact your local KOMATSU dealer if the pump does not switch on.

4-3

4.3. Towing the machine

4.3.

Troubleshooting

Towing the machine WARNING

Towing with a traction machine that is too light may result in accidents! Use a traction machine which has at least the same weight as the machine that you want to tow off.

Determine the operation weight of the faulty or damaged machine and compare it to the maximum tractive force of the machine to be towed off. The maximum tractive force must be greater than the operation weight. Tow the machine only to that location where it can be maintained or repaired. Use a traction machine which has at least the same weight as the machine that you want to tow off. Use always a tow bar for towing. CAUTION Tow bars which are attached to incorrect points may damage the machine! Use only the intended attachments points for attaching the tow bar.

You must fix the tow bar at the front machine using the marked eyes. Am Then, attach the tow bar to the traction opening. Ask the relevant Komatsu dealer for more details about towing. If it is necessary to tow off the machine with the engine switched off, adhere to the following instructions: ●

Set the directional lever or directional switch to the neutral position.

●

If the engine is switched off, do not exceed the max. speed of 10 km per hour to avoid damages to the transmission system due to insufficient lubrication. Do not tow off the machine for more than 10 km.

●

The steering gear becomes only effective during driving, since the emergency steering pump is actuated by the transmission system via cardan shafts.

●

The pressure supply for the operational brake is used up after a couple of braking manoeuvres. In these situations, only the parking brake can be used for braking.

During transportation by truck, rail or during being town by crane with the axle in lift-up position, it is necessary to fix the articulated joint with a lock. With the axle lifted, the articulated joint of the running axle Bei angehobener Achse has to be removed. Note that the parking brake is ineffective with the cardan shafts removed.

4-4

Troubleshooting

4.3. Towing the machine

WARNING â&#x2014;?

If the brakes of the machine to be town are faulty, the machine may crash into the traction machine during being town!

â&#x2014;?

Always use two machines to tow off a machine with defective brakes. Connect the three machines with tow bars or use a truck for transporting.

If you want to tow off a machine with faulty brakes, or if it is necessary to tow the machine uphill, two machines are required for towing. Hang the machine to be town to a larger machine with sufficient traction force and braking power. Hang a second machine on the rear section of the machine to be town. This will help you to prevent that the machine to be town gets out of control. Towing can be performed under different conditions so that it is not possible to specify the basic requirements beforehand. Towing on a flat, plane surfaces requires considerable less traction force than towing in uphill direction or on uneven ground.

4-5

4.3. Towing the machine

4.3.1. Engine can still be used â&#x2014;?

If the transmission and steering wheel can be operated, and the engine is running, it is possible to tow the machine out of mud or to move it for a short distance to the side of the road.

â&#x2014;?

The operator should sit on the machine being towed and operate the steering in the direction that the machine is towed.

4.3.2. Engine cannot be used When towing a machine with the engine stopped, use the following procedure: 1. The transmission oil does not lubricate the system, so remove the front and rear drive shafts. If necessary, block the tires to prevent the machine from moving. 2. The steering cannot be operated, so remove the steering cylinder. Even if the brakes are in good condition, the brakes can only be used a limited number of times. There is no change in the actuating force for the brake pedal, but the braking force is reduced each time the pedal is depressed. 3. Connect the towing equipment securely. When carrying out towing operations, use two machines of at least the same class as the machine being towed. Connect one machine each to the front and rear of the machine being towed, then remove the blocks from the tires and tow the machine. 4. The parking brake cannot be released by handbrake lever when engine is not running. The parking brake must be released as described in section "4.3.3. Releasing the parking brake" on page 4-7. The parking brake cannot be operated with the cardan shafts are removed.

4-6

Troubleshooting

4.3. Towing the machine

4.3.3. Releasing the parking brake WARNING â&#x2014;?

Stop the machine on a flat surface when releasing the parking brake, and check that the surroundings are safe. In emergencies or when the parking brake must be released on a hill, block the tyres carefully before releasing the brake.

â&#x2014;?

When the parking brake is released, no braking force is applied, so check carefully that the situation is safe when moving the machine.

If the engine is switched off, it is impossible to release the parking brake can no longer be released after several operations with the help of the manual braking lever since the pressure in the pressure supply of the parking brake is dropiing. See item "17. Parking Brake" on page 3-27.

1 2

GK100239

Releasing the Brake A

1. Loosen adjustment screws (1) and bolts (2) at A, B, C (3 places) at the front of the transmission case. 2. Rotate lock plate (3) to release the lock, then tighten adjustment screw (1) up to the stop. 3. If this is done for all three places (A, B, C), the parking brake can be released.

B C AE062130

NOTE The parking brake remains without impact, even when the engine is started! 3

1 AE062140

4-7

4.3. Towing the machine

Troubleshooting

4.3.4. Emergency travel operation The normal gear shifting is carried out by electric signals. If there is a failure in the electrical system and the machine does not move, it is possible to move the machine by using the following procedure: â&#x2014;?

The emergency travel operation is to enable the machine to drive under its own power to the nearest repair shop when there is a failure in the electrical system. This operation must not be used for any other purpose.

â&#x2014;?

When performing this operation, always keep the engine stopped except when starting the machine.

â&#x2014;?

When starting the engine, always depress the brake pedal and check that the surrounding area is safe and the machine is in operational condition.

NOTE Always request your Komatsu distributor to carry out the emergency travel operation, or consult your Komatsu distributor before carrying it out yourself. Emergency travel operation, when the automatic shift control is out of function 1. Apply the parking brake lever and set the speed lever to the neutral position. 2. Move emergency travel switch to the position "E" (the emergency switch is either located behind the operator`s seat, next to the fuse box, or on the inside of the console next to the parking brake lever).

A E

3. Depress the brake pedal, start the engine and release the parking brake. 4. Set the directional lever to forward or revers. Release the brake pedal and start to travel carefully. Lever positions: GK100310

4-8

Emergency travel operation on.

Emergency travel operation off.

Troubleshooting

4.3. Towing the machine

Emergency travel operation, when the electrical circuit for gear shifting is inoperationable 1. Apply the parking brake lever and set the speed lever to the neutral position. 2. Release bolt (1) and turn plate (2) until spool is (3) unlocked.

3. Pull spool (3) in position "F" for 2nd gear forward or push it into position "R" for 2nd gear revers whatever direction is intended.

4. Disconnect all connectors to the transmission control valve. 5. Release lock-nut (5) and tighten the adjustment-screw (4) to the proportional solenoid valve (6) carefully to its stop.

GK100311

6. Depress the brake pedal, start the engine, then release the parking brake and slowly release the brake pedal to allow the machine to move.

RN F

After completion of emergency travel operation:

1. For normal operation set the spool (3) to the neutral position. Install plate (2) and bolt (1) securely to hold it in place as otherwise the spool may come out when the machine is travelling.

GK100312

2. Carefully release adjustment-screw (4) of the proportional solenoid valve (6) up to its stop and secure with lock-nut (5). 4 3. Connect all connectors to the transmission control valve.

5 6

GK100313

4-9

4.4. If battery is discharged

4.4.

Troubleshooting

If battery is discharged WARNING

●

Before checking or handling the battery, stop the engine and turn the starter switch key to the OFF position.

●

Before starting the engine, use a damp cloth to wipe off the dust accumulated on the top of the battery.

●

The battery generates hydrogen gas,so there is the danger of an explosion. Do not bring lit cigarettes near the battery and avoid anything that will cause sparks.

●

Battery electrolyte is dilute sulphuric acid, which will attack your clothes and skin. If it gets on your clothes or on your skin, wash it off immediately with large amounts of water. If it gets in your eyes, wash it out with fresh water, and consult a doctor.

●

When handling the battery, always wear protectives goggles.

●

When removing the battery, first disconnect the cable from the ground (normally, from the negative (-) terminal). When installing the battery, install the positive (+) terminal first. If a tool touches the cable connecting the positive terminal and the chassis, there is the danger of spark information.

●

If the terminals are loose the defective contact may generate sparks that will cause an explosion. When installing the terminals, install them tightly.

●

When removing or installing the battery, check which is the positive (+) terminal and negative (-) terminal. Make sure that the cover of the positive terminal (+) is mounted.

GK100314

GK100315

4-10

Troubleshooting

4.4. If battery is discharged

4.4.1. Precautions for charging the battery Charging with the Battery Installed in the Machine ●

Before charging, disconnect the cable from the negative (-) terminal of the battery. Otherwise, an unusually high voltage will damage the alternator.

●

While charging the battery, remove all battery plugs for a sufficient ventilation. To avoid gas explosions, do not bring fire or sparks near the battery.

●

If the electrolyte temperature exceeds 45°C, stop charging for a while.

●

Turn off the charger as soon as the battery is charged. Overcharging the battery may cause the following: ❍

Overheating of the battery

❍

Decreasing the quantity of electrolyte

❍

Damaging the electrode plate.

●

Do not mix the cables (positive (+) to negative (-) or negative (-) to positive (+)), as this will damage the alternator.

●

When performing any service to the battery besides checking the electrolyte level or measuring the specific gravity, disconnect cables from the battery.

NOTE The batteries are on both sides at the rear of the machine. The battery used for the ground is on the right side of the machine.

4-11

4.4. If battery is discharged

Troubleshooting

4.4.2. Starting the engine with a booster cable For starting the engine with a booster cable, proceed as follows: Precautions for connecting and disconnecting the booster cable

WARNING

●

When connecting the cables, never contact the positive (+) and negative (-) teminals.

●

When starting the engine with a booster cable, always wear safety goggles.

●

Be careful not to let the normal machine and defective machine contact each other. This prevents sparks from being generated near the battery which could ignite the hydrogen gas leaking from the battery. If hydrogen gas explodes, it may cause serious injury.

●

Make sure that there is no mistake in the booster cable connections. The final connection is made to the engine block of the defective machine, but sparks will be generated when this is done, so connect it to a place as far as possible from the battery.

●

Be careful when removing the cables from the machine that has been started. Do not allow the cable ends to contact each other or the machine to avoid hydrogen explosion.

NOTE ●

The size of the booster cable and clip should be suitable for the battery size.

●

The battery of the normal machine must have the same capacity as that of the engine to be started.

●

Check the cables and clips for damage or corrosion.

●

Make sure that the cables and clips are firmly connected.

The batteries are on both sides at the rear of the machine. The battery used for the ground is on the right side of the machine.

4-12

INCORRECT

AE063650

Troubleshooting

4.4. If battery is discharged

Connecting the booster cables Keep the start switch set to OFF. Connect the booster cable as follows, in the order of the numbers marked in the diagram.

A 3

1. Make sure that the start switches of the normal and defective machine are both set to OFF. 2. Connect one clip of booster cable (A) to the positive (+) terminal of the defective machine.

Battery of the normal machine

Battery of the problem machine

Engine block of the problem machine

3. Connect the other clip of booster cable (A) to the positive (+) terminal of the normal machine.

GK100316

4. Connect one clip of booster cable (B) to the negative (-) terminal of the normal machine. 5. Connect the other clip of booster cable (B) to the engine block of the defective machine. 6. Let the engine run with a high speed. Starting the engine 1. Make sure the clips are firmly connected to the battery terminals. 2. Turn the start switch of the defective machine to the START position and start the engine. If the engine does not start at first, wait for at least 2 minutes before trying again. Disconnecting the booster cables After the engine has started, disconnect the booster cables in reverse order in which they were connected. 1. Remove one clip of booster cable (B) from the engine block of the defective machine. 2. Remove the other clip of booster cable (B) from the negative (-) terminal of the normal machine. 3. Remove one clip of booster cable (A) from the positive (+) terminal of the normal machine.

A 2

Battery of the normal machine

Engine block of the problem machine

Battery of the problem machine

1 GK100316

4. Remove the other clip of booster cable (A) from the positive (+) terminal of the defective machine.

4-13

4.5. Other troubles

4.5.

Troubleshooting

Other troubles

4.5.1. Electrical system If faults or causes of faults are not listed below, have them rectified by local dealer. ELECTRICAL SYSTEM Fault

Fault cause

Remedy

Battery charging control lamp shines when engine is running at high speed.

Faulty electrical connection

Check/repair terminals, connecting points and cables. *)

Battery charging control lamp flickering when engine is running.

Alternator belt tension too low

Adjust belt tension.

Faulty electrical connection

Check/repair terminals, connecting points and cables. *)

Faulty alternator

Replace alternator or regulator.*)

Alternator belt tension too low

Adjust belt tension.

Faulty alternator

Replace alternator. *)

Faulty electrical connection

Check/repair terminals, connecting points and cables. *)

Battery charge too low

Recharge battery.

Starter pinion engages/ disengages repeatedly.

Battery charge too low

Recharge battery.

Faulty starter

Change starter. *)

Starter only turns engine over slowly.

Battery charge too low

Recharge battery.

Faulty starter

Change starter. *)

Battery charge too low

Recharge battery.

Faulty starter

Repair/change starter. *)

Faulty electrical connection

Check/repair terminals, connecting points and cables. *)

Faulty bulb

Replace bulb.

Faulty electrical connection

Check, repair.

Loose contact in electrical intake pre-heater

Check, repair.

Heating relay switch not working fully

Replace. *)

Battery charging control lamp does not go out when engine is running.

Alternator making strange noises.

Starter does not turn over.

Starter disengages before the engine has ignited. Battery charging control lamp does not light up when the engine is switched off and the ignition switch is set to the operating position.

The outside of the electrical intake air pre-heater does not feel warm

*) Have this work performed by local dealer.

4-14

Troubleshooting

4.5. Other troubles

4.5.2. Chassis If faults or causes of faults are not listed below, have them rectified by local dealer. TRANSMISSION Fault

Machine does not drive.

Machine only runs slowly and not at full power.

Overheating.

Noises.

Fault cause

Remedy

Parking brake on

Release parking brake.

Drive direction lever not engaged correctly

Engage drive direction lever correctly.

Oil level too low

Top up with oil according to specifications.

Oil level too low

Top up with oil according to specifications.

Screen is clogged

Disassemble, clean

Oil level too low or too high

"Top up with oil according to specifications.

Machine being driven in a gear which is too high

Run machine in a lower gear.

Torque converter stopped for too long

Reduce down time

Engine overheating

See "ENGINE; fault: Temperature gauge in red zone and respective control lamp flashing."

Oil level too low

Top up with oil according to specifications.

*) Have this work performed by local dealer.

AXLES Fault

Fault cause

Remedy

Oil level too low

Top up with oil according to specifications.

Incorrect oil for machine with multidisc self-locking differential

Top up with specified oil.

Noises.

*) Have this work performed by local dealer.

4-15

4.5. Other troubles

Troubleshooting

Chassis continued If faults or causes of faults are not listed below, have them rectified by local dealer. BRAKES Fault

Brakes not working.

Brake drags or remains applied

Fault cause

Remedy

Brake discs have reached limit of wear

Replace brake discs. *)

Air in the system

Bleed system. *)

Hydraulic system faulty

Repair. *)

Lack of oil

Add oil to specified level

Vent hole of brake valve is clogged

Clean

*) Have this work performed by local dealer.

PARKING BRAKE Fault

Fault cause

Remedy

Too much play on brake lever

Adjust brake. *)

Brake lining worn

Replace brake linings. *)

Lack of oil in transmission case

Add oil to specified level

Screen is clogged

Disassemble and clean

Faulty brake action.

Brake drags or remains applied

*) Have this work performed by local dealer.

STEERING Fault

Fault cause

Remedy

Faulty hydraulic system

Repair. *)

Lack of oil

Add oil to specified level

Play on steering cylinder bolts too large

Repair. *)

Hydraulic system faulty

Repair. *)

Lack of oil

Add oil to specified level

Steering reaction sluggish.

Steering wobbles.

*) Have this work performed by local dealer.

4-16

Troubleshooting

4.5. Other troubles

Chassis continued If faults or causes of faults are not listed below, have them rectified by local dealer. HYDRAULIC SYSTEM Fault

Fault cause

Remedy

Insufficient lifting force.

Oil level too low

Top up with oil according to specifications.

Lift action too slow.

Filter insert dirty

Replace insert. *)

Poor oil quality

Top up with prescribed oil.

Oil level too low

Top up with oil according to specifications.

Air in oil line

Bleed air

Hydraulic pressure too low

Oil level too low and pump is sucking in air

Top up with oil according to specifications and bleed air

Cylinders jerking.

Oil level too low

Top up with oil according to specifications.

Air bubbles in oil.

*) Have this work performed by local dealer.

4-17

4.5. Other troubles

Troubleshooting

4.5.3. Engine If faults or causes of faults are not listed below, have them rectified by local dealer. ENGINE Fault

Warning lamp for oil pressure lights up with engine running.

Steam emitting from pressure valve of radiator cap.

Temperature gauge in red zone and respective control lamp flashing.

Fault cause

Remedy

Oil level too low

Top up with oil.

Oil filter cartridge dirty

Change cartridge.

Oil pipe connection faulty

Check, repair. *)

Pressure sensor faulty

Replace sensor. *)

Coolant level too low

Top up with coolant.

Loss of coolant

Seal cooling system.

Fan belt loose

Retighten belt.

Scale formation or dirt in cooling system

Clean inside of cooling system.

Radiator dirty outside

Clean outside of radiator.

Thermostat faulty

Replace thermostat. *)

Faulty or loose radiator cap when operating at high altitudes

Replace/tighten radiator cap.

Faulty coolant level sensor

Replace sensor. *)

Thermostat faulty

Replace thermostat. *)

Faulty temperature display

Replace temperature display. *)

Not enough fuel

Fill up with fuel.

Air in the fuel system

Fill up fuel filter with fuel.

Faulty injection pump or nozzles

Replace injection pump or injection nozzles. *)

Starting speed too slow

See "ELECTRICAL SYSTEM".

Compression too low because of incorrect valve clearance

Adjust valve clearance. *)

Oil level too high

Adjust to prescribed oil level.

Incorrect fuel

Use prescribed fuel.

Temperature display in white zone.

Engine does not start.

Exhaust gases are white or blue.

*) Have this work performed by local dealer.

4-18

Troubleshooting

4.5. Other troubles

Engine continued If faults or causes of faults are not listed below, have them rectified by local dealer ENGINE (continued) Fault

Exhaust gases black at times.

Combustion makes sound like breathing at times.

Fault cause

Remedy

Air filter insert dirty

Clean/replace insert.

Injection nozzle faulty

Replace injection nozzles. *)

Compression too low because of incorrect valve clearance

Adjust valve clearance.*)

Turbocharger faulty

Clean/replace turbocharger. *)

Injection nozzle defect

Replace injection nozzles. *)

Incorrect fuel

Use recommended fuel.

Overheating

See "Fault: Temperature gauge in red zone and respective control lamp flashing."

Silencer faulty

Replace silencer.*)

Valve clearance too large

Adjust valve clearance.*)

Unusual combustion noises.

Unusual mechanical noises.

*) Have this work performed by local dealer.

4-19

4.5. Other troubles

4-20

Troubleshooting

Maintenance

5. Maintenance

5-1

5.1. Maintenance guide

5.1.

Maintenance

Maintenance guide

Do not perform any inspection and maintenance operation works which are not indicated in this manual. Perform maintenance work on hard, flat ground. Always bring the machine in the specified maintenance and repair position. Always carry out works with the machine in the following position unless otherwise specified. ●

Lower the work equipment on the ground and set it as shown in the diagram on the right.

●

Set all control levers to the neutral or HOLD position.

●

Set the safety lever to the LOCK position. GK100318

●

Pull the parking brake lever to apply the parking brake.

●

Put blocks in front of and behind the tires.

●

Lock the front and rear frames with the safety bar.

Check service meter Check the service meter every day to see if any maintenance is due. Komatsu original replacement parts Only use Komatsu original parts specified in the Parts Book as replacement parts. Oils and grease Use only original oils and grease by Komatsu. Choose oils and grease with the specified viscosity depending on the ambient temperature. Use only clean oil and grease. Keep also containers for oil and grease clean. Be careful not to operate with foreign substances in the vicinity of oil and grease. Washer fluid Use automobile window washer fluid and make sure it is not contaminated with dust or dirt. Keep the machine clean Always keep the machine clean. This facilitates troubleshooting considerably. In particular, keep grease fitting, breathers and oil level gauges clean and avoid any contamination with foreign materials.

5-2

Maintenance

5.1. Maintenance guide

Be careful with hot fluids Draining hot oils and coolants and removing their filters immediately after stopping the engine are hazardous. Allow the engine to cool before. If the oil has to be drained when it is cold, warm it up to a suitable temperature (approx. 20 - 40 Â°C), then drain! Check for foreign particles in drained oil and on filters After oil is changed or filters are replaced, check the oil and filters for metallic particles and foreign materials. If large quantities of metallic particles or foreign materials are found, consult your Komatsu dealer. Refilling fuel or oil, fuel strainer Refill only fuel or oil in sufficiently ventilated places. If your machine is equipped with a fuel strainer, do not remove it while fueling. Re-close it after fueling. Spilled fuel or oil may cause accidents due to slipping. It may also ignite. For this reason, always remove any spilled oil or fuel. Never use fuel for cleaning or rinsing parts. Be careful not to contaminate soil or water with oil or fuel. Dispose oil and fuel in an appropriate manner. Oil check or change Check or change oils only in dust-free places to keep foreign particles away from oils. Warning tag Attach the warning tag to the start switch or other related control elements to avoid that somebody starts the engine during maintenance. The warning tag is supplied together with the tools. Safety labels During the operation, always observe the precautions on the safety label attached to the machine.

5-3

5.1. Maintenance guide

Welding instructions ●

Turn off the engine start switch (OFF position).

●

Do not apply more than 200 V continuously.

●

Keep a safety distance of min. 1 m (3.28 ft) between the area to be welded and the battery.

●

Connect grounding cable within 1 m (3.28 ft) from the area to be welded.

●

No seals or bearings may be between the area to be welded and the grounding point.

●

Never weld any pipe or tube containing fuel or oil.

Fire prevention Use nonflammable cleaners or light oil for cleaning parts. Keep flame or cigarette light away from light oil. Clamp faces When O rings or gaskets are removed, clean the clamp faces and replace the O rings and gaskets with new ones. Be sure to fit O rings and gaskets during re-assembly! Objects in your pockets Keep your pockets free of loose objects which can fall out and drop into the machine (especially when bending over the machine). Tyres check When working in rocky areas, check the tyres for damage and for looseness, flaws, wear and tear. Re-tighten loose bolts and nuts. Precautions when washing the machine ●

Place the machine on a plane, even surface.

●

Lower the work equipment to the ground.

●

Apply the parking brake.

●

Lock the wheels using support wedges to prevent the machine from rolling away.

Proceed the following general measures, if you want to clean the machine: ●

Never spray steam or water directly on the radiator.

●

Do not allow water to get on any electrical component.

5-4

Maintenance

5.1. Maintenance guide

Pre- and post-work checks Before starting work in mud, rain, snow or at the seashore, check plugs and valves for tightness. Wash the machine immediately after the work to protect components from rusting. Lubricate components more frequently than usual. Be sure to lubricate work equipment pins daily if they are submerged in water. On worksites where heavy-duty operations are common, reduce the maintenance and lubricating intervals. Dusty worksites When working at dusty worksites, take the following precautions: ●

Inspect the air cleaner clogging warning lamp to see whether the air cleaner is blocked. Clean the air cleaner more frequently than specified.

●

Clean the radiator core frequently to avoid clogging.

●

Clean and replace the fuel filter frequently.

●

Clean electrical components, especially the starter and alternator to avoid accumulation of dust.

Avoid mixing oils Never mix oils of different brands. If you have only oil which is different from the oil brand used in the machine, do not add it but replace the entire oil.

5-5

5.2. Maintenance basics

5.2.

Maintenance

Maintenance basics

●

Only use original Komatsu parts for replacement.

●

When changing or adding oil, do not use a different type of oil.

●

Unless otherwise specified, the oil and coolant used at the time of shipment are as shown in the table below. Item

Lubricant or substance required for operation

Engine

Engine oil: API CE, API CF-4, SAE 15W-40*)

Transmission

Engine oil: API CD, SAE 10W For machines with standard differential TPD: Axle oil: Fuchs RENOGEAR HYDRA ZF 20W-40 or AXO75

Axles ** For machines with multiple-disk limited-slip differential: Axle oil: Fuchs RENOGEAR HYDRA ZF 20W-40 Hydraulic oil:

H-LP, DIN 51 524, part 2, ISO VG 46 or

Engine oil:

SAE 10 W, API classification CD

Hydraulic tank Lubricating nipple

EP lubricating grease on lithium basis, NLGI 2 ASTM D975 No. 2

Fuel ASTM D975 No. 1 in winter (from October to March) Radiator

Komatsu super coolant AF-ACL, mixed with 50 % water

Air conditioner

cfw free refrigerant R 134a

**)

5-6

If no engine oil of the API CE or API CF-4 specification is available, API CC or API CD-classified engine oil can be used alternatively. The oil change intervals must be split in half in this case, however. For more details refer to section "5.4.3. Axle oils (AXO)" on page 5-14 Note 1a.

Maintenance

5.2. Maintenance basics

5.2.1. Oil, fuel and coolant specifications Oil ●

Oil is used in the engine and work equipment under extremely severe conditions (high temperature, high pressure), and it deteriorates with use. Always use oil that matches the grade and temperature given in the Operation and Maintenance Manual. Even if the oil is not dirty, always replace the oil after the specified interval.

●

Oil can be compared to blood in the human body, so always be careful when handling it to prevent any impurities (water, metal particles, dirt, etc.) from penetrating. The majority of problems with machines are caused by the entry of such impurities. Take particular care not to let any impurities penetrate when storing or adding oil.

●

Never mix oils of different grades or brands.

●

Always add the specified amount of oil. Having too much oil or too little oil may both cause problems.

●

If the oil in the work equipment is not clear, there is probably water or air getting into the circuit. In such cases, please contact your Komatsu distributor.

●

When changing the oil, always replace the related filters at the same time.

●

We recommend to have an analysis of the oil made periodically to check the condition of the machine. Those who wish to use this service, are requested to their Komatsu distributor.

5-7

5.2. Maintenance basics

Fuel ●

The fuel pump is a precision instrument; if fuel containing water or dirt is used, it cannot work properly.

●

Be extremely careful not to let impurities penetrate when storing or adding fuel.

●

Always use the fuel specified in the Operation and Maintenance Manual. Fuel may congeal depending on the temperature (particularly at low temperatures below -15 °C), so change to a fue matching this temperature.

●

To prevent the moisture in the air from condensing and forming water inside the fuel tank, always fill the fuel tank after completing the day's work.

●

Before starting the engine, or when 10 minutes have passed after adding fuel, drain the sediment and water from the fuel tank.

●

If the engine runs out of fuel, or if the filters have been replaced, you must fill up the fuel pre-filter with fuel and may then restart the engine. For details, see "4.1. When the machine runs out of fuel" on page 4-2.

●

If the fuel sulphur content is between 0.5 and 1.0 %, the oil change interval must be 1/2 normal. If the fuel sulphur content is more 1.0 %, the oil change interval must be 1/4 normal.

5-8

Maintenance

5.2. Maintenance basics

Coolant ●

River water contains large amounts of calcium and other impurities, so if it is used, scale will stick to the engine and radiator causing a defective heat exchange and overheating.

●

Do not use water that is not suitable for drinking.

●

When using anti-freeze, always observe the precautions given in the Operation and Maintenance Manual.

●

Komatsu machines are supplied with Komatsu original antifreeze in the coolant when the machine is shipped. This anti-freeze prevents corrosion in the cooling system. The anti-freeze can be used continuously for two years or 4000 hours. Therefore, it can be used as it is even in hot areas.

●

Anti- freeze is flammable, so be extremely careful not to expose it to open flame or fire.

●

The proportion of anti-freeze to water differs according to the ambient temperature. For details of the mixing ratios, see "Cleaning the interior of the cooling system" on page 5-24.

●

If the engine overheats, wait for the engine to cool before adding coolant.

●

If the coolant level is low, it will cause overheating and corrosion due to the air in the coolant.

Grease ●

Grease is used to prevent twisting and noise at the joints.

●

The nipples not included in the maintenance section are nipples for overhaul, so they need not be lubricated. If any part becomes stiff after being used for a long time, add grease.

●

Always wipe off all of the old grease that is pushed out when greasing. Be particularly careful to wipe off the old grease in places where sand or dirt in the grease would cause the rotating parts to wear.

Storing oil and fuel ●

Keep oil and fuel indoors to prevent any water, dirt or other impurities from penetrating.

●

When keeping barrels for a long period, lay down the barrel on its side so that the filler port is at the side (to prevent moisture from being sucked in). If barrels have to be stored outside, cover them with a waterproof sheet or take other measures to protect them.

●

To prevent any change in quality during long term storage, be sure to use in the order of 'first in - first out' (use the oldest oil or fuel first). 5-9

5.2. Maintenance basics

Filters ●

Filters are extremely important safety parts. They prevent impurities in the fuel and air circuits from entering important equipment and causing problems. Replace all filters periodically. For details, see the Operation and Maintenance Manual. However, when working under severe conditions, it is necessary to consider replacing the filters at shorter intervals according to the oil and fuel (sulfur content) being used.

●

Never try to clean the filters (cartridge type) and use them again. Always replace with new filters.

●

When replacing oil filters, check if any metal particles are stuck to the old filter. If any metal particles are found, please contact your Komatsu distributor.

●

Do not open packs of spare filters until just before they are to be used.

●

Always use original Komatsu filters.

Biodegradable hydraulic oil and lubricants The use of biodegradable hydraulic oils and lubricants - on the basis of synthetic esters - for Komatsu machines is permitted. For information on the products cleared for use and best suited for your application contact our authorized service workshops.

5.2.2. Specifications of the electrical system ●

If the wiring gets wet or the insulation is damaged, the electrical system leaks resulting in hazardous malfunctions of the machine.

●

Maintenance work at the electrical system includes: (1) check fan belt tension, (2) check damage or wear to the fan belt and (3) check battery fluid level.

●

Never remove or disassemble any electrical components installed in the machine.

●

Never install any electrical components other than those specified by Komatsu.

●

Be careful to keep the electrical system free of water when washing the machine or when it is raining.

●

When working on the seashore, carefully clean the electrical system to prevent corrosion.

●

The optional power source must never be connected to the fuse, start switch, or battery relay.

5-10

Maintenance

5.3.

5.3. Wearing parts list

Wearing parts list

Wearing parts such as filter elements, air cleaner elements, bolton edges, etc. are to be replaced at the time of periodic maintenance or before their abrasion limits, are reached. The wearing parts should be changed correctly in order to use the machine economically. For replacement, KOMATSU genuine parts of excellent quality should be used. When ordering parts, please check the part number in the parts handbook. The parts in parentheses are to be replaced at the same time. Item

Part no.

Engine oil filter

600-211-1231

Cartridge

every 250 hours

Fuel filter

600-311-8292

Cartridge

every 500 hours

Gear oil filter

424-16-11140 (424-16-11130) (419-15-14860) (07002-01223) (0419-15-14870)

Cartridge (O-ring) (O-ring) (Gasket) (Gasket)

1 (1) (1) (1) (1)

initial service after 250 hours every 500 hours

Transmission strainer

07000-05085 07000-02100

O-ring O-ring

1 1

every 1000 hours

Corrosion resistor

600-411-1151

Cartridge

every 1000 hours

Hydraulic filter

42Y-60-H5080 (07000-05175)

Element (O-ring)

2 (1)

initial service after 250 hours every 2000 hours

Pressure reservoir

421-43-H0P43 (421-43-H0P42)

Filter element (O-ring)

1 (1)

every 2000 hours

Hydraulic tank breather

285-62-17320

Element

every 2000 hours

Engine valve cover

6150-11-8810 6150-11-8820

Gasket Gasket

6 24

initial service after 250 hours every 2000 hours

600-181-1600

600-181-1660

Filter element incl. Safety filter Filter element

423-56-H0P08

Element

Air filter Air conditioner (air filter)

Part name

Q'ty

Replacement interval

when necessary 1 when necessary

5-11

5.4. Lubricants and operating means

5.4.

Lubricants and operating means

5.4.1. Lubrication chart

1. Lubrication intervals are based on the service meter reading. 2. Abbreviations: EO = Engine Oil, G = Lithium Grease No. 2, F = Diesel Fuel, AXO = Axle Oil (AXO 75), HO = Hydraulic Oil. 3. Numbers at the left side of the chart indicate the number of lubrication points. Refer to the above illustration. 4. Items marked * should be performed in the first service for new machines after 250 hour driving.

5-12

Maintenance

5.4. Lubricants and operating means

5.4.2. Lubricants, fuels and filling capacities LUBRICANTS, FUELS AND FILLING CAPACITIES Wa470-3

Lubricants, fuel etc.

BI code ****)

Temperature ranges

Quality grades

Viscosity ranges

Approx. filling capacity in litres

Engine

Engine oil EO

EO 1540 A EO 1030 A EO 30 EO 10

CCMC D4 or, if not available, API CE or API CF -4 ²)

-10° to 50° C -20° to 40° C - 0° to 40° C -40° to 20° C

SAE 15W-40 *) SAE 10W-30 SAE 30 SAE 10W

38 (34 **)

Transmission

Engine oil EO

EO 10

CCMC D4 or, if not available, API CD

SAE 10W

60 (60 **)

Universal transmission and hydraulic oil

NRS

Fuchs: RENOGEAR HYDRA ZF 20W-40*) Komatsu: AXO 75 Caltex: RPM TRACTOR HYDRAULIC FLUID Chevron: TRACTOR HYDRAULIC FLUID Texaco: TDH OIL Mobil: MOBILAND SUPER UNIVERSAL

or engine oil EO

EO 30

CCMC D4 or, if not available, API CD

Universal transmission and hydraulic oil

NRS

Fuchs: RENOGEAR HYDRA ZF 20W-40*)

Hydraulic oil HYD

HYD 0530

HVLP, HVLP D

-35° to 50° C

ISO VG 46 *)

or engine oil EO

EO 10

CCMC D4 or, if not available, API CD

-35° to 40° C

SAE 10W

or hydraulic oil BIO-E-HYD

BIO-E-HYD 0530

HEES (to VDMA fluid technology)

-35° to 50° C

ISO VG 46

Long-life coolant with anti-frost and rust prevention SP-C

SP-C

Anti-frost and rust prevention

Fuel tank

Diesel fuel ³)

CFPP class B CFPP class D CFPP class E CFPP class F

DIN-EN 590

up to 0°C up to -10°C up to -15°C up to -20°C

Grease nipples, central lubrication

Multi-purpose grease MPG on a lithium base

MPG-A

KP2N-20

-10° to 50° C -35° to -10° C

Coolant Refrigerating machine oil

NRS

Air conditioning

R134a (CFC-free) PAG (polyalkylglycol oil)

Axles with standard locking differentials type KWA 022 W-1 KWA 022 W-2

Axles with multidisc locking differentials type KWA 022 W-3 KWA 022 W-4

Hydraulic system, steering, brakes

Cooling system

NRS

SAE 30

2x65

310 (155**)

381

NLGI 2 *) NLGI 0 1500 g 150 cm ³

The specified filling capacities are approximate guidelines; test specifications are binding. The selection of the viscosity class depends on the predominantly existing outside temperature. The temperature limits are to be regarded as guidelines which can be exceeded up or down for a brief period. *) Works filling **) Top-up quantity’ ²) If no engine oil of the API CE or API CF-4 specification is available, API CC or API CD-classified engine oil can be used alternatively. The oil change intervals must be split in half in this case, however. ³) If the fuel sulphur content is between 0.5 and 1.0 %, the oil change interval must be 1/2 normal. With a sulphur content of more than 1.0 %, the oil change interval must be 1/4 normal. ****) BI codes are the "standard lubricants" for construction machinery and vehicles of the Hauptverband der Deutschen Bauindustrie e.V. (BI). The brochure "Regelschmierstoffe für Baumaschinen- und Fahrzeuge" (Standard Lubricants for Construction Machinery and Vehicles" can be obtained from bookstores or Bauverlag GmbH, Wiesbaden and Berlin, under the ISBN no. 3-7625-3102-1."

5-13

5.4. Lubricants and operating means

5.4.3. Axle oils (AXO) The selection of the oils depends on the equipment of the axle: 1a

Standard axles TPD (without multi-disc limited-slip differential) Characteristics

Type KWA 022 W-1, front Type KWA 022 W-2, rear

These axles must be filled with the following recommended oil brands: FUCHS

RENOGEAR HYDRA ZF 20W-40

KOMATSU

AX0 75

CALTEX

RPM TRACTOR HYDRAULIC FLUID

CHEVRON

TRACTOR HYDRAULIC FLUID

TEXACO

TDH OIL

MOBIL

MOBILAND SUPER UNIVERSAL

For reasons of harmonization, engine oil in accordance API CD/ SAE 30 may be used in the standard axle instead of axle oil. Any noises from the brakes do not affect the life. 1b

Axles with multi-disc limited-slip differential Characteristics

Type KWA 022 W-3, front Type KWA 022 W-4, rear

These axles must be filled with the following recommended oil brands: FUCHS

RENOGEAR HYDRA ZF 20W-40

SHELL

DONAX TD

MOBIL

MOBILFLUID 424 (european version)

ESSO

TORQUE FLUID 56

The use of not recommended axle oils may cause unnormal noises from the differential.

5-14

Maintenance

5.5.

5.5. Tools and standard tightening torques (bolts, nuts)

Tools and standard tightening torques (bolts, nuts)

5.5.1. Introduction of recommended tools No.

Name of tool

Wrench set

Part No.

09000-30006

Remarks Applicable width across flats (S1 - S2) 8 mm - 10 mm 12 mm - 14mm 13 mm - 17mm 19 mm - 22mm 24 mm - 27mm S2 30 mm - 32mm

Screwdriver

421-98-H1120

–

Screwdriver

421-98-H1110

–

Wrench

09014-10200

–

Pliers

09036-00150

–

Grease gun

424-98-H1010

–

Hose

424-98-H1020

(for grease gun)

Grease cartridge

07950-90403

(Lithium base grease: 400g)

Hammer

421-98-H1140

–

Pocket

421-98-H1130

–

Shield

09963-00100

–

Extinguisher

421-968-H110

–

Screws

01435-00616

(Qty 4)

Meter

09054-00009

–

S1 AD053370

If any of the above tools are broken, please order them from your KOMATSU distributor.

5-15

5.5. Tools and standard tightening torques (bolts, nuts)

Maintenance

5.5.2. Torque list Unless otherwise specified, tighten the metric bolts and nuts to the torque shown in the table. The tightening torque is determined by the width across flats of the nut and bolt.

If it is necessary to replace any nut or bolt, always use a Komatsu genuine part of the same size as the part that was replaced.

Tread diameter of the bolt (mm) (a)

Width across flat (mm) (b)

AD053380

AD054300

kgm

lbft

13.2 ± 1.4

1.35 ± 0.15

9.73 ± 1.03

31,4 ± 2.9

3.2 ± 0.3

23.2 ± 2.1

65,7 ± 6.8

6.7 ± 0.7

48.5 ± 5.0

112 ± 9.8

11.5 ± 1.0

82.6 ± 7.2

177 ± 19

18.0 ± 2.0

131 ± 14

279 ± 29

28.5 ± 3

206 ± 21

383 ± 39

39 ± 3

282 ± 29

549 ± 58

56 ± 6

405 ± 43

745 ± 78

76 ± 8

549 ± 58

927 ± 98

94.5 ± 10

684 ± 72

1320 ± 140

135 ± 15

973 ± 100

1720 ± 190

175 ± 20

1270 ± 140

2210 ± 240

225 ± 25

1630 ± 180

2750 ± 290

280 ± 30

2030 ± 210

3280 ± 340

335 ± 35

2420 ± 250

NOTE When tightening panels or other parts having tightening fixtures made of plastic, be careful not to use excessive tightening torque: doing so will damage the plastic parts.

5-16

Maintenance

5.6.

5.6. Periodical replacement of safety-critical parts

Periodical replacement of safety-critical parts

To ensure trouble-free operation of the machine, the user of the machine must always carry out periodic maintenance. In addition, to maintain safety standards, the user should also periodically replace all safety related parts, which are particularly closely connected to safety and fire prevention. ●

The seat belt must be replaced every 3 years even if there are no visible damages.

●

The standard service life under normal conditions should not exceed 6 years.

●

Hoses must be replaced as soon as the following damage is noticeable: ❍

damage to the outer layer through to the intermediate layer,

❍

brittleness in the outer layer,

❍

distortions in pressurised or unpressurised state not conforming with the original shape of the installed hose,

❍

leakages,

❍

damage to the hose fittings or to the connection between fittings and hose,

❍

storage damage (the shelf life of the hose should not exceed 2 years).

When replacing the hoses, always replace the O-rings, gaskets, and other such parts at the same time. Ask your Komatsu distributor to replace the safety critical parts.

5-17

5.7. Maintenance schedule chart

5.7.

Maintenance

Maintenance schedule chart Service Procedure

see page

5.8.1

Initial 250 hours service

5-21

5.8.2

Maintenance upon demand

5-21

Check, clean or replace air cleaner element

5-21

Dust pre-extractor "Turbo II": check, clean

5-24

Cleaning the interior of the cooling system

5-24

Checking the transmission oil level, adding oil

5-28

Checking the axle oil level, adding oil

5-29

Checking axle case breather

5-30

Cleaning radiator fins

5-31

Replacing the bolt-on cutting edge

5-32

Replacing the bucket teeth

5-33

Checking the air-conditioning system

5-34

Cleaning the condenser of air conditioner

5-35

Checking the window washing-fluid level, adding fluid

5-35

Lubricating the work equipment control lever (2 points)

5-35

Draining water from the water separator (if installed)

5-36

Topping up the grease reservoir of the central lubrication system

5-36

Checks before starting

5-38

Checking the monitor panel

5-38

Emergency steering system

5-39

Checking the coolant level, adding coolant

5-40

Checking the fuel level, adding fuel

5-41

Checking the oil level in engine oil pan, add oil

5-42

Checking the electrical connections

5-43

Checking for water and sediment in water separator, draining water (if installed)

5-43

Checking the parking brake function

5-44

Checking the operational brake function

5-45

Checking the sound of horn and backup buzzer

5-45

Checking flashing of lamps, checking for dirt or damage

5-45

Checking engine exhaust colour and sound

5-45

Checking the gauge functions

5-45

Checking steering wheel play, checking the steering function

5-45

5.8.3

5-18

Maintenance

5.7. Maintenance schedule chart

Service Procedure

5.8.4

5.8.5

5.8.6

5.8.7

5.8.8

5.8.9

see page

Checking direction of rear view mirror, checking for dirt or damage

5-45

Every 50 hours service

5-46

Checking the tyre inflation pressure

5-46

Draining water and deposits from fuel tank

5-46

Every 100 hours service

5-47

Checking the oil level in the hydraulic tank, adding oil

5-47

Cleaning the inserts of the fresh air filter of the air-conditioning system

5-48

Lubricating the rear axle pivot pin (3 points)

5-49

Every 250 service hours

5-50

Changing oil in the engine oil pan, replacing engine oil filter cartridge

5-50

Checking and adjusting the fan belt and V-belt tension

5-52

Checking for loose wheel hub nuts, tightening the nuts

5-53

Cleaning the inserts of the recirculation filter of the airconditioning system

5-53

Checking and adjusting the compressor belt tension of the air-conditioning system

5-54

Checking the battery electrolyte level

5-55

Every 500 service hours

5-56

Replacing the fuel filter cartridge

5-56

Replacing the transmission oil filter insert

5-57

Every 1000 service hours

5-58

Changing the oil in the transmission case, cleaning the strainer

5-58

Cleaning the transmission case breather

5-59

Lubrication

5-60

Checking the tightening parts of the turbo-charger

5-62

Checking the play of the turbo-charger rotor

5-62

Replacing the anti-corrosive filter cartridge

5-62

Checking the accumulator gas pressure

5-62

Every 2000 service hours

5-63

Changing the oil in the hydraulic tank, replacing the hydraulic filter inserts

5-63

Replacing the hydraulic tank breather element

5-65

Changing the axle oil

5-66

Checking the alternator starter motor

5-68

Checking and adjusting the valve clearance of the engine

5-68

Checking the brake disc wear

5-68

Checking the shock absorber

5-68

5-19

5.7. Maintenance schedule chart

Maintenance

Service Procedure

5.8.10

5-20

see page

Replacing the element in the recirculating and fresh air filter of the air-conditioning system

5-68

Cleaning and checking the turbo-charger

5-68

Replacing the filter in the brake storage unit

5-69

Every 4000 service hours

5-70

Checking the water pump

5-70

Maintenance

5.8.

5.8. Service procedure

Service procedure

5.8.1. Initial 250 hours service Carry out the following maintenance works after the first 250 hours only. ●

Replace fuel filter cartridge.

●

Replace transmission oil filter element.

●

Replace hydraulic tank filter element.

For details about replacement or maintenance, see section "5.8.7. Every 500 service hours" on page 5-56.

5.8.2. Maintenance upon demand Check, clean or replace air cleaner element WARNING ●

Never clean or replace the air cleaner element with the engine running.

●

When using compressed air to clean the element always wear eye protection in form of safety glasses or goggles.

Checking If the air cleaner clogging warning lamp (1) on the maintenance monitor flashes, clean the air cleaner element.

AE060954

Cleaning or replacing the air cleaner element 1. Release the wing nut (2) and remove the element (3). 2. Clean the inside of the air cleaner element. 2 3

5-21

5.8. Service procedure

Maintenance

3. Blow dry compressed air (less than 7 bar, 100 psi) through the element from the inside along the grooves, then apply from the outside and again from the inside.

AE063670

4. Remove the seal from the outer element after cleaning it. The outer element must be replaced after 6 times of cleaning or after one year of use. Always replace outer and inner element together. If the dust indicator displays red immediately after the outer element has been cleaned, replace both the inner and outer element, even if the outer element has not been cleaned 6 times. Check the inner element mounting nuts for looseness and, if necessary, retighten.Check the inner element mounting nuts for looseness and, if necessary, retighten.

4 AE063680

Replace seal washer (5) or wing nut (4) with new parts if they are broken. NOTE If small holes or thinner parts are found on the element when checking it with an electric bulb after cleaning and drying, replace the element. When cleaning the element, do not hit it or beat it against other objects. Do not use elements with damaged gasket or seal or groove. 5. Reinstall the cleaned element.

AE063690

5-22

Maintenance

5.8. Service procedure

Replacing the internal element 1. First remove the outer element of the air cleaner and then the internal protective element. 2. To prevent dust from intruding, use a clean cloth or tape to cover the air connector (outlet side). 3. Clean the interior of the air cleaner body, then remove the cover installed in step 2. 4. Fit a new internal element to the connector and tighten it with nuts. Do not clean and reinstall an inner element. 5. Install the outer element. With water Flush tap water (less than 3 bar, 43 psi) through the element from the inside along the grooves, then from the outside and again from the inside. Dry and check. With cleaning agent For removing oils and fats as well as carbon etc. sticking to the element, the element may be cleaned in lukewarm solution of mild detergent; then rinse in clean water and let dry. Drying can be speeded up by blowing dried compressed air with less than 7 bar (100 psi) from the inside to the outside of the element. Never attempt to heat the element. Using warm water (about 40Â°C) instead of soapy water may also help.

5-23

5.8. Service procedure

Maintenance

Dust pre-extractor "Turbo II": check, clean (This pre-extractor is an optional extra) The intake screen and the dust extractor gap (at the bottom circumference of the pre-extractor) must always be kept clean. The pre-extractor should be unscrewed and its condition checked from time to time depending on use. If necessary, blow out the pre-extractor from the inside.

Cleaning the interior of the cooling system WARNING ●

Immediately after the engine has stopped, the coolant is hot and may cause injuries. Allow the engine to cool before draining the water.

●

Since cleaning is performed while the engine is running, it is very dangerous to walk or stand under the machine as the machine may suddenly start moving. Therefore, never go under the machine while the engine is running.

●

Never remove the radiator cap when the engine is at operating temperature as the coolant is under pressure. Boiling water and steam spurting out from the radiator may cause injuries. Allow the engine to cool until the radiator filler cap is cool enough to be touched with your hand. Remove the filler cap slowly to allow pressure to be relieved.

●

Stop the machine on level ground when cleaning or changing the coolant.

●

Clean the inside of the cooling system change the coolant and replace the corrosion resistor according to the table below.

Kind of coolant

Cleaning inside of cooling system and changing coolant

Permanent type antifreeze (all season)

Every year (autumn) or every 2000 hours, whichever comes first

Non-permanent type anti-freeze containing ethylene glycol (winter, one-season)

Every 6 months (spring, autumn) (Drain antifreeze in spring, add antifreeze in autumn)

When not using antifreeze

Every 6 months or every 1000 hours, whichever comes first

5-24

Replacing corrosion resistor

Every 1000 hours, when cleaning the inside of the cooling system and when changing the coolant

Maintenance

●

5.8. Service procedure

When determining the ratio between antifreeze and water, check the lowest temperature in the past, and mix the components according to the table below. It is recommended to use a temperature for determining the mixing ratio which is approx. 10°C lower.

Mixing ratio - water : antifreeze

Min. Atmospheric temperature

Amount of antifreeze

Amount of water

°C

-5

-10

-15

-20

-25

-30

°F

-4

-13

-22

15.6

20.4

23.8

27.2

30.6

34.0

US gal

4.12

5.39

6.28

7.18

8.08

8.98

UK gal

3.43

4.49

5.24

5.98

6.73

7.48

52.4

47.6

44.2

40.8

37.4

34.0

US gal

13.84

12.57

11.68

10.78

9.88

8.98

UK gal

11.53

10.47

9.72

8.98

8.23

7.48

WARNING ●

Antifreeze is flammable, so keep it away from any flame.

●

The concentration of the antifreeze must not exceed 68%. If the concentration of the antifreeze exceeds 68%, the freezing point of the water/antifreeze mixture increases again.

●

Use tap water as cooling water. If river water, well water etc. must be used, contact your Komatsu dealer.

●

We recommend the use of an antifreeze density gauge to control the mixing ratios.

1. Stop the engine and tighten the corrosion resistor valves. 2. Turn off radiator cap (1) slowly.

5-25

5.8. Service procedure

Maintenance

3. Prepare a container to catch the coolant, then open drain valve (2) of the radiator and drain plug (3) at the side of the cylinder block to drain the coolant. 4. After draining the water, close drain valve (2) and plug (3), and fill with tap water.

5. When the radiator is filled, start the engine and run it at low idling. Open drain valve (2) and plug (3), run the engine at low idling, and flush water through the system for 10 minutes. During this process, adjust the speed of filling and draining the water so that the radiator is always full. While flushing water through the system, watch carefully that the water inlet hose does not come off the radiator water filler. 6. After flushing, stop the engine, open drain valve (2) and plug (3), then close it again after draining the water completely. 7. After that, clean with a detergent. For details of the cleaning method, see the instructions for the detergent. 8. After cleaning, open drain valve (2) and plug (3) to drain all the cooling water, then close them and slowly fill up clean water. 9. When the water almost reaches up to the water filler port, open drain valve (2) and plug (3), run the engine at low idling, and continue to run water through the system until clean colorless water comes out. During this process, adjust the speed of filling and draining the water so that the radiator is always full. 10. When the water is completely clean, stop the engine, close drain valve (2) and plug (3). 11. Replace the corrosion resistor cartridge and open valves (1). For details about replacing the corrosion resistor, see "5.8.8. Every 1000 service hours" on page 5-58. 12. Add cooling water until it overflows from the water filler. 13. To remove the air in the cooling water, run for five minutes at low idling, then for another five minutes at high idling with the radiator cap (2) removed.

5-26

Maintenance

5.8. Service procedure

14. Drain the coolant from sub-tank (4), clean the inside of the sub-tank, then add water until the coolant level is between the FULL and LOW marks.

15. Stop the engine, wait for about three minutes, add cooling water up close to the radiator water filler port, then retighten the cap.

FULL LOW AE061640

5-27

5.8. Service procedure

Maintenance

Checking the transmission oil level, adding oil WARNING â&#x2014;?

When checking the oil level, apply the parking brake, and lock the front and rear frames with the safety bar and pin.

â&#x2014;?

The oil is at high temperature after the machine has been operated. Always wait for the temperature to go down before starting this operation.

Perform this procedure if there is any sign of oil on the transmission case, or if there is oil mixed with the cooling water. 1. Start the engine and run it for at least 5 minutes. 2. Open the cap of oil filler port (F), remove dipstick (G) , and wipe the oil off with a cloth. F

3. Insert dipstick (G) fully in the oil filler pipe, then take it out again. G 4. The oil level should be between the H and L marks on dipstick (G). If the oil level is below the L mark, add engine oil through oil filler (F). For details of the oil to be used, see section "5.4. Lubricants and operating means" on page 5-12.

GK100325

5. If the oil is above the H mark, drain the excessive engine oil through drain plug (P), then check the oil level again. 6. If the oil level is correct, insert dipstick (G) into the oil filler pipe, then re-tighten the cap.

5-28

AE062270

Maintenance

5.8. Service procedure

Checking the axle oil level, adding oil WARNING â&#x2014;?

When checking the oil level, apply the parking brake, and lock the front and rear frames with the safety bar and pin.

â&#x2014;?

The oil is at high temperature after the machine has been operated. Always wait for the temperature to cool down before starting this operation.

Carry out this procedure if there is any oil on the axle case. Perform the inspection with the machine on a horizontal road surface. (On slopes or inclined surfaces the oil level cannot be checked correctly). 1. Stop the engine and remove oil level plug (1).

Front

2. Check that the oil level reaches up to the bottom of the plug hole. 3. If the oil is not close to the bottom edge, add axle oil through filler port (F).

For details of the oil to be used, see section "5.4. Lubricants and operating means" on page 5-12. 4. If the oil level is correct, re-install the plug. Tightening torque: 125 - 175 Nm

GK100326

Rear

1 F

GK100327

5-29

5.8. Service procedure

Maintenance

Checking axle case breather WARNING When cleaning, apply the parking brake, and lock the front and rear frames with the safety bar and pin.

Remove all mud and dirt from around the breather with a brush.

Front

Always clean both breathers at the front and rear.

GK100328

Rear

GK100329

5-30

Maintenance

5.8. Service procedure

Cleaning radiator fins Carry out this procedure, if there is any mud or dirt sticking to the radiator. 1. Remove bolts (1), then remove the rear grill from the rear of the machine. Remove the connector of the rear working lamp at the same time. 2. Use compressed air to clean the mud, dust, and leaves from the radiator fins. Steam or water may be used instead of compressed air.

GK100330

3. The rubber hose should be checked at the smae time. If the hose is found to have cracks or to be hardened by ageing, it should be replaced with a new one. Loose hose clamps must also be tightened.

GK100331

5-31

5.8. Service procedure

Maintenance

Replacing the bolt-on cutting edge DANGER ●

It is extremely dangerous if the work equipment moves while turning around or replacing the cutting edge.

●

Lower the work equipment to the ground, stop the engine, then set the safety lock for the work equipment control lever securely to the LOCK position.

Turn over or replace the cutting edge before it is worn down to the edge of the bucket. 1. Raise the bucket to a suitable height, then put blocks under the bucket to prevent the bucket from coming down. Raise the bucket so that the bottom surface of the bucket is horizontal. 2. Remove nuts and bolts (1), then remove cutting edge (2). 3. Clean the mounting surface of cutting edge (2).

4. Turn around the cutting edge (2) and install it to the bucket. Turning around the cutting edge means, installing it the other way round (left edge to right side, right edge to left side). NOTE If both sides of the cutting edge are worn, it must be replaced. If the edge is worn down to the mounting surface, repair the mounting surface before installing the new cutting edge. 5. Tighten nuts and bolts (1) uniformly so that there is no gap between bucket and cutting edge. Tightening torque for mounting bolt: 750 ± 100 Nm (555 ± 75 lbft) 6. After a couple of operating hours, re-tighten the mounting bolts.

5-32

Block 2

GK100332

Maintenance

5.8. Service procedure

Replacing the bucket teeth DANGER Any movement of the work equipment when replacing the teeth is extremely dangerous. Lower the work equipment to the ground, then stop the engine and securely lock the work equipment control levers.

When the bucket teeth are worn, replace them as follows: 1. Raise the bucket to a convenient height, and put blocks under the bucket to prevent it from coming down. Raise the bucket so that the bottom is horizontal. 2. Remove the bolt and nuts (1) and (2), then remove bucket tooth (3).

3. Clean the installation surface of bucket tooth (3). 4. Install new teeth to the bucket. If necessary, insert shims so that there is no clearance between the teeth and the top surface of the bucket. NOTE Continue to add shims until it becomes impossible to add a 0.5 mm shim. If the mounting surface is worn, repair it before installing the teeth.

Block GK100333

5. To prevent any gap between the teeth and tip of the bucket, tighten bolts and nuts (1) and (2) temporarily, then hit the tip of the teeth with a hammer. Tightening torque of mounting bolt (1): 900 ± 40 Nm (665 ± 30 lbft) Tightening torque of mounting bolt (2): 620 ± 30 Nm (460 ± 22 lbft) 6. After operating the machine for a few hours, retighten the mounting bolts.

5-33

5.8. Service procedure

Maintenance

Checking the air-conditioning system Check the air-conditioning system twice a year, in spring and autumn. Checking the coolant level

WARNING If the liquid gets into your eyes or on your hands, it may cause loss of sight or frostbite: Therefore never loosen any part of the refrigerant circuit.

Operate the cooler of the air-conditioning system for 5 - 10 minutes, then touch the high pressure portion and low pressure portion of the compressor (or high pressure hose and low pressure hose joint) with your hand. At the same time, inspect the flow of coolant (R134a) through the sight glass to check the gas level.

Sight glass

Contact your Komatsu dealer for this inspection. The sight glass is installed next to the receiver at the side of the condenser.

Receiver GK100335

Color condition

Normal

Abnormal

Temperature of high and low pressures pipes

High pressure pipe is hot. Low presure pipe is cold. Clear difference in temperature.

High pressure pipe is warm. Low pressure pipe is cold. Little difference in temperature.

Amost no difference in temperature between high and low pressure pipes.

Almost transparent. All bubbles disappear if the engine speed is increased or reduced.

Bubbles are always visible. Sometimes becomes transparent, or white bubbles appear.

Opaque substance is visible in the fluid.

Pipe connections

Properly connected.

Some parts contaminated with oil.

Some parts heavily stained with oil.

General conditions of cooler

Coolant level correct, no abnormalitities. Ready for use.

Ther may be a leak somewhere. Call service repair shop for inspection.

Almost all coolant has leaked out. Contact service repair shop immediately.

Sight glass

5-34

Maintenance

5.8. Service procedure

Cleaning the condenser of air conditioner CAUTION Do not wash the condenser with a steam cleaner. Otherwise, the condenser will get hot and may break down.

If there is mud or dust sticking to the air conditioner condenser, clean it with water. If the water pressure is too high, the fins may get deformed. When washing with a high pressure washing device, apply the water from a reasonable distance.

GK100336

Checking the window washing-fluid level, adding fluid Check the washing-fluid level in washer tank (1). When the fluid has run short, add window washing fluid for cars.

To prevent the nozzles from clogging, be careful not to let dust get into the fluid.

Lubricating the work equipment control lever (2 points) If the work equipment control lever is heavy or does not move smoothly, apply grease. 1. Using a grease pump, pump in grease through the grease fittings shown by arrows. 2. After greasing, wipe off any cold grease that was pushed out.

AE062390

5-35

5.8. Service procedure

Maintenance

Draining water from the water separator (if installed) When float level (2) is at or above the red line (1), drain the water according the following procedure: 1. Loosen drain plug (3) and drain the accumulated water until the float reaches the bottom.

2. Tighten drain plug (3). 3. If air is sucked into the fuel line when draining the water, be sure to bleed air in the same manner as for the fuel filter.

See Fuel Filter Cartridge in the section "5.8.7. Every 500 service hours" on page 5-56.

3 GK100338

Topping up the grease reservoir of the central lubrication system 1. The grease reservoir must be topped up at the latest when the grease level has reached the "Minimum" marking (1). 2. Grease is topped up through the filler nipple (3) on the cover of the grease reservoir using a high-pressure grease gun.

3 2

3. Remove the protective cover from the filler nipple (3) on the cover of the grease reservoir.

4. Clean the filler nipple (3) and surrounding area as well as the end of the nozzle of the high-pressure grease gun. 1 5. Place the nozzle of the high-pressure grease gun on the filler nipple. 6. Switch the ignition on. 7. Activate the high-pressure grease gun. 5 8. Press button (5) on the pump so that the pump switches on and carries out a lubrication cycle while topping up takes place. This ensures that the grease is more evenly spread in the grease reservoir and prevents the formation of air bubbles. 9. Top the grease reservoir up to the "Maximum" marking (2). See section "5.4.2. Lubricants, fuels and filling capacities" on page 5-13 for the type of grease to be used. NOTE The reservoir must not be topped up beyond the "Maximum" marking, otherwise the compensation hole (4) will be blocked. A vacuum is caused in the grease reservoir as the grease level drops if there is a blockage in the compensation hole. This can result in a fault in the lubrication circuit.

5-36

Maintenance

5.8. Service procedure

10. After topping up, remove the high-pressure grease gun nozzle from the filler nipple and put the protective cap back on the filler nipple. 11. Upon completion of the lubrication cycle, check whether fresh grease has emerged at all lubrication points. If not, press button (5) on the pump again so that another lubrication cycle is carried out. Repeat this process as long as necessary until fresh grease has emerged at all lubrication points. 12. Check the distribution and line system regularly for leaks and damage (breakage, buckled lines). 13. In particular, check the lubrication lines for leaks because a fault of this kind does not lead to the yellow warning lamp (6) lighting up on the button in the cab. NOTE Dirt, snow or water must not be allowed to get into the system when carrying out any work on the central lubrication system, particularly when filling/topping-up or carrying out maintenance and inspection work, as this could lead to malfunctions!

5-37

5.8. Service procedure

Maintenance

5.8.3. Checks before starting Checking the monitor panel 1. Turn the start switch ON. 2. Check that all the monitor lamps, the gauges and the warning lamp light up for about 3 seconds and the alarm buzzer sounds for aobut 1 second. If any monitor lamp does not light up, ask your Komatsu distributor to inspect it. Do not carry out pre-start checks on the monitor alone; always carry out the items specified for the periodic maintenance, as well. GK100265

5-38

Maintenance

5.8. Service procedure

2 1 SPEED

WORK MODE H S Ec

CHECK CAUTION PARKING BRAKE

GK100260

2. Start engine. The red control lamp (1) for steering switch off. The green control lamp (2) for emergency steering remains off.

OFF

3. Drive with engine running. The red control lamp (1) for steering remains off. The green control lamp (2) for emergency steering remains off.

START

A0061160

WARNING ●

If the red control lamp (1) flashes whilst the engine is running there is a fault in the steering’s hydraulic circuit.

●

Steering

Emergency steering

2 GK100343

5-39

5.8. Service procedure

Maintenance

Checking the coolant level, adding coolant WARNING Normally, do not open the radiator cap. Always wait for the engine to cool down before checking the water level, and check using the sub-tank.

1. Open the top cover at the front of the engine hood in the middle of the machine, and make sure that the coolant level is between the FULL and LOW mark on sub-tank (1). If the coolant level is low, add water up to the FULL level through the water filler in sub-tank (1). 2. After adding water, tighten the cap securely.

3. If sub-tank (1) is empty, check for water leakage, then add water to the radiator and sub-tank.

FULL LOW AE061640

5-40

Maintenance

5.8. Service procedure

Checking the fuel level, adding fuel WARNING When adding fuel, never let the fuel overflow. This may cause a fire. If spilling fuel, thoroughly clean it up.

1. Turn the engine starter switch to the ON position, then check the fuel level with fuel gauge (G). Then, reset the start switch to OFF.

2. Upon completion of work, add fuel through filler (F) until the fuel tank is full. For details about opening and closing the cap, see section "3.2.5. Cap with lock" on page 3-37. For details of the fuel to be used, see section "5.4. Lubricants and operating means" on page 5-12.

AE060954

3. After adding fuel, tighten the cap securely. Fuel capacity: 381 l

GK100259

5-41

5.8. Service procedure

Maintenance

Checking the oil level in engine oil pan, add oil 1. Open the engine side cover at the rear right side of the machine. 2. Remove dipstick (G) and wipe off the oil with a cloth. 3. Insert dipstick (G) fully in the oil filler pipe, then pull it out again. F G P

4. The oil level should be between the H and L mark on dipstick (G). If the oil level is below the L mark, add engine oil through oil filler (F) . For details of the oil to be used, see section "5.4. Lubricants and operating means" on page 5-12.

AE061670

5. If the oil is above the H mark, drain the excess engine oil from drain plug (P), and re-check the oil level. 6. If the oil level is correct, tighten the oil filler cap securely, then tighten the engine side cover. NOTE â&#x2014;?

When checking the oil level after the engine has been operated, wait for at least 15 minutes after stopping the engine before checking.

â&#x2014;?

If the machine is at an angle, make it horizontal before checking.

5-42

Maintenance

5.8. Service procedure

Checking the electrical connections WARNING If the fuse blows frequently, or there are traces of shortcircuiting in the electric wiring, always locate and repair the cause.

CAUTION Accumulation of flammable material (dead leaves, twigs, grass, etc.) around the battery may cause fire; therefore, always check and remove it, if necessary.

Check for damage to the fuses and any sign of disconnection or short circuit in the electrical wiring. Check also for loose terminals and tighten any loose parts. Check the following points carefully: ●

Battery

●

Starter motor

●

Alternator

Please contact your Komatsu distributor for troubleshooting.

Checking for water and sediment in water separator, draining water (if installed) The water separator separates water mixed in the fuel. If the float level (2) is at or above the red line (1), drain the water. For details about draining see section "5.8.2. Maintenance upon demand" on page 5-21. When the machine is provided with a water separator, it is also required to check the fuel tank for water and dirt deposits. If necessary, remove water or dirt (see section "Draining water and deposits from fuel tank" on page 5-46).

1 2

GK100338

5-43

5.8. Service procedure

Maintenance

Checking the parking brake function CAUTION Even if the parking brake switch is turned ON, keep the brake pedal depressed until the parking brake control lamp lights up.

Test conditions ●

Tire inflation pressure: as specified

●

Road surface: Dry paved surface with 25° grade

●

Machine: Operating conditions

Test method

25% GK100261

1. Start the engine, set the machine facing straight to the front, then drive the machine up a 25° grade with the bucket empty. 2. Depress the brake, stop the machine, return the directional lever to the neutral position, then stop the engine. 3. Set the parking brake switch to ON, release the brake pedal slowly, and check whether machine is held in position.

25% GK100262

5-44

Maintenance

5.8. Service procedure

Checking the operational brake function Drive the machine at a speed of 20 km/h (12.4 MPH) on a dry flat concrete road surface, and check whether the stopping distance is less than 5 m (16.4 ft).

Checking the sound of horn and backup buzzer Checking flashing of lamps, checking for dirt or damage Checking engine exhaust colour and sound Checking the gauge functions Checking steering wheel play, checking the steering function Checking direction of rear view mirror, checking for dirt or damage

5-45

5.8. Service procedure

Maintenance

5.8.4. Every 50 hours service Checking the tyre inflation pressure Measure the inflation pressure before the machine operation when the tires are cool. NOTE The appropriate tyre inflation pressure differs according to the type of work; see section "3.3.17. Tyre handling" on page 3-101.

Draining water and deposits from fuel tank Loosen valve (1) on the right side of the tank so that the deposits and water will be drained together with fuel. NOTE The maintenance interval depends to a large extent on the purity of the used fuel.

1 GK100389

5-46

Maintenance

5.8. Service procedure

5.8.5. Every 100 hours service This coincides with the 50 hours service.

Checking the oil level in the hydraulic tank, adding oil WARNING â&#x2014;?

When the oil filler cap is removed, oil may spurt out, so stop the engine and wait for the oil temperature to cool down; then turn the cap slowly to release the internal pressure before removing the cap.

â&#x2014;?

If oil has been filled up above the H mark, stop the engine and wait for the hydraulic oil to cool down, then drain the excess oil from the drain plug.

1. Lower the bucket horizontally to the ground and stop the engine. Wait for 5 minutes, then check sight gauge (G). The oil level should be between the H and L marks. NOTE Do not add oil if the level is above the H line. This will damage the hydraulic equipment and cause the oil to spurt out. G 2. If the oil is below the L level, open the inspection cover above the step and add oil through the oil filler port (F).

For details of the oil to be used, see section "5.4. Lubricants and operating means" on page 5-12.

5-47

5.8. Service procedure

Maintenance

Cleaning the inserts of the fresh air filter of the airconditioning system CAUTION When using compressed air, wear safety glasses and other protective clothes.

After using the air-conditioning, the air filter should be cleaned. Switch off the air-conditioning before cleaning the insert. 1. Loosen bolt (1) and remove cover (2).

1 2

AE062420

2. Loosen screw (3), then take out the insert (4) and clean it. 3. Blow compressed air (max. 7 bar) along the folds from the inside of the insert; repeat from the outside, then blow again from the inside. NOTE

When re-assembling the insert; the arrow on top of the element must point toward the interior of the cab. AE062430

5-48

Maintenance

5.8. Service procedure

Lubricating the rear axle pivot pin (3 points) WARNING â&#x2014;?

Lower the work equipment to the ground, then stop the engine and securely lock the work equipment control levers.

â&#x2014;?

Apply the parking brake, and lock the front and rear frame with the safety bar and pin.

1. Using a grease gun, pump in grease through the grease fittings marked by the arrows. 2. After greasing, wipe off any old grease that is pressed out.

GK100346

5-49

5.8. Service procedure

Maintenance

5.8.6. Every 250 service hours Maintenance for every 50 and 100 hours should be performed at the same time.

Changing oil in the engine oil pan, replacing engine oil filter cartridge DANGER Danger of scalding! Engine oil must be drained while being still warm after operation. Wear protective gloves,while draining the engine oil. Avoid any contact with the hot oil.

NOTE Change oil and oil filter every 250 hours of operation, however at the latest every 6 months. Use oils from the API CE or CF-4 class. Change oil and oil filter after 125 hours of operation if oil from the CD or CC class is used. Prepare the following ●

Collecting container: min. 35 l capacity

●

Refill capacity: 35 l

●

Filter wrench

NOTE Drain off engine oil only in operation-warm condition. 1. Open the engine side cover located on the right-hand side of the machine. 2. Open the oil filler port (F). 3. Place a collecting container under the drain plug (P). 4. Loosen the drain plug (P), and drain the oil. 5. Check the drained oil; if there are metal particles or foreign material, please contact your Komatsu dealer. 6. Install drain plug (P). 7. Using the filter wrench, screw off the filter cartridge in counterclockwise direction.

5-50

F P

Maintenance

5.8. Service procedure

8. Clean the filter holder. 9. Insert a new seal. 10. Clean the surface of the oil filter cartridges. 1

11. Fill the new cartridge with engine oil.

12. Coat the seal and thread of the cartridge with engine oil (or coat thinly with grease). Re-install the engine oil filter cartridge. 13. For the re-assembly, bring the sealing surface into contact with the filter holder, then tighten it by a further 2/3 - 1 turn.

14. After replacing the filter cartridge, add engine oil through the oil filler (F) until the oil level is between the H and L mark on the dipstick. For details about the recommended oil types, see section "5.4. Lubricants and operating means" on page 5-12. 15. Let the engine run idle for a short time, then stop it and check whether the oil level still is between the H and L mark on the dipstick. For details, see section "5.8.3. Checks before starting" on page 5-38.

AE061670

5-51

5.8. Service procedure

Maintenance

Checking and adjusting the fan belt and V-belt tension Check The deflection of the belt should be approx. 10 mm (0.39 in) when applying a force of approx. 6 kg (13 lb) with the finger in the centre between the fan pulley and the alternator pulley.

~ 10 mm

GK100349

Adjustment 1. Slacken the screws (1), (2) and (3).

2. Turn nuts (1) and (4) to the right and shift the alternator (5) so that the belt deflection is approx. 10 mm (0.39 in) when being pressed with a force of approx. 6 kg (13 lb). 2 3. Re-tighten thenuts and bolts (1), (2) and (3). 4. Check each pulley for damage, wear of the groove, and wear of the belt. In particular, make sure that the belt does not touch the bottom of the groove. 5. Replace the belt if it has been over streched, leaving no allowance for adjustment, or if the belt shows any cuts or cracks. 6. When replacing the V belt, re-adjust the tension after one hour of operation.

5-52

5 3

Maintenance

5.8. Service procedure

Checking for loose wheel hub nuts, tightening the nuts WARNING If wheel hub nuts (1) are loose, the tire wear will increase and accidents may occur.

1. Check for loose nuts and tighten, if necessary. When checking for loose nuts, always turn the nuts in the direction of tightening. Tightening torque: 420 - 520 Nm 1 2. If any stud bolt is broken, all stud bolts for that wheel must be replaced.

GK100348

Cleaning the inserts of the recirculation filter of the airconditioning system 1. Open the filter inspection cover (1), remove the filter cover (2), then remove the filter in the direction of the arrow.

When removing the filter to the side, put your weight on the seat and push down. 2. Clean with compressed air in the same way as for the fresh air filter. If the filter is extremely dirty, rinse it in water. After that, dry it completely before the re-assembly.

GK100350

5-53

5.8. Service procedure

Maintenance

Checking and adjusting the compressor belt tension of the air-conditioning system Check The deflection of the belt should be approx. 13 - 17 mm when pressed with the thumb at a point in the centre between the compressor pulley and the fan pulley.

GK100352

Adjustment 1. Slacken the screw (1). 2. To tension the V-belt, turn the nut (2) anticlockwise. To reduce the V-beltâ&#x20AC;&#x2122;s tension, turn the nut (2) clockwise.

1 2

3. Re-tighten the screw (1). Check each pulley for damage, wear of the V groove and wear of the V belt. The V belt must not run on the bottom of the belt disk. Replace the V belt if it is over-streched, leaving no allowance for adjustment, or if the belt shows any cuts or cracks.

5-54

GK100352

Maintenance

5.8. Service procedure

Checking the battery electrolyte level WARNING â&#x2014;?

Danger of explosions! Do not come near the battery with nacked fire or sparks.

â&#x2014;?

Battery electrolyte is dangerous. If it gets in your eyes or on your skin, wash it off with large amounts of water, and consult a doctor.

Carry out this check before operating the machine. 1. Open the cover of the battery box. There are two battery boxes: One on each side at the rear of the machine. 2. Remoce cap (1) and check that electrolyte is at the specified level (10 to 12 mm) above the plate. If the electrolyte level is low, add distilled water to the specified level. If the battery electrolyte is spilled, add dilute sulphuric acid.

GK100353

3. Check all cells and top up with destilled water, if required. Clean the air hole in the battery cap, then tighten the cap securely. NOTE When adding distilled water in cold weather, add it before starting the operation in the morning to prevent the electrolyte from freezing.

5-55

5.8. Service procedure

Maintenance

5.8.7. Every 500 service hours Maintenance for every 50, 100 and 250 hours should be performed at the same time.

Replacing the fuel filter cartridge WARNING â&#x2014;?

Immediately after machine operation, the engine is hot. Therefore, wait for the engine to cool down before replacing the filter.

â&#x2014;?

Avoid any open fire or sparks near the fuel.

Prepare a filter wrench and a container to catch the fuel. 1. Open the right-hand engine cover plate. 2. Put the drip container in place below the filter cartridge (1).

3. Use the filter wrench to unscrew the filter cartridge. 4. Clean the filter holder, fill a new filter cartridge with clean fuel, coat the packing surface with engine oil, then re-install it in the filter holder. 5. For the re-assembly, tighten the cartrridge until the packing surface contacts the seal surface of the filter holder, then tighten another 2/3 turn (approx.). If the filter cartridge is tightened too far, the packing will be damaged leading to fuel leakage. If the filter cartridge is too loose, fuel will also leak from the packing, so always tighten to the correct amount. 6. Now loosen air bleed plug (2). 7. Loosen the feed pump knob (3) and move the pump up and down until bubble-free fuel comes out of the plug. 8. Tighten air bleed plug, then push and tighten the knob of feed pump. 2 CAUTION Caution during turning the engine. It may start up after a few turns!

5-56

Maintenance

5.8. Service procedure

9. After replacing the filter cartridge, turn the key in the starter switch to the START position. The air will be bled within a few seconds and the engine will start. When the engine starts, check for any leakage from the filter seal surface.

Replacing the transmission oil filter insert 1. Set the collecting container under the filter case. 2. Remove drain plug (1) at the bottom of the filter case and drain the oil. After draining the oil, re-righten the plug. 3. Hold case (2) and loosen center bolt (3), then remove case (2).

2 1

4. Remove the element and clean the inside of the case. 5. Replace the filter gasket and O rings. Coat the new gasket and O rings with clean oil before their installation. 6. Place the new element in the housing and attach the housing using the central screw (3).

GK100355

Tightening torque: 65 - 88 Nm 7. Run the engine at idling for a short time, then check that the oil is at the correct level. For details, see section "5.8.2. Maintenance upon demand" on page 5-21.

5-57

5.8. Service procedure

Maintenance

5.8.8. Every 1000 service hours Maintenance for every 50, 100, 250 and 500 hours should be carried out simultaneously.

Changing the oil in the transmission case, cleaning the strainer WARNING Immediately after the machine operation, the oil is hot. Therefore, wait for the oil to cool down before carrying out maintenance.

â&#x2014;?

Collecting container: min. 60 l capacity

â&#x2014;?

Refill capacity: see Section "5.4. Lubricants and operating means" on page 5-12.

1. Set the collecting container under drain plug (P), then remove drain plug (P) and drain the oil. To prevent the oil from pouring out suddenly, lossen and remove drain plug (P) gradually. 2. After draining the oil, re-install drain plug (P). Tightening torque: 60 - 75 Nm 3. Set a collection container under the transmission oil filter.

P GK100356

4. Remove transmission filter drain plug (1), drain the oil, then tighten the plug again. Tightening torque: 95 - 120 Nm 1

GK100355

5. Remove the screws (2) and dismount the cover (3). Unscrew the strainer (4) from the cover (3). 2

6. Remove any dirt stuck to strainer, then wash it in clean diesel oil or flushing oil. If the strainer is damaged, it must be replaced. 7. Re-install the strainer (4) to the cover (3). Strainer tightening torque: 95 - 120 Nm Replace the O ring on the cover, then re-install the cover.

5-58

3 4 GK100358

Maintenance

5.8. Service procedure

8. Pour in the specified amount of engine oil through the oil filler port (F) . For details about the recommended oil, see section "5.4. Lubricants and operating means" on page 5-12.

9. After re-fitting oil, check that the oil is at the specified level. For details, see section "5.8.2. Maintenance upon demand" on page 5-21. 10. Check for oil leakage from the transmission case and filter. GK100359

Cleaning the transmission case breather Remove all mud and dirt from around the breather, then remove the breather. Pour in cleaning fluid and clean the breather. Take care that no dust and dirt enters the transmission case through the port while the breather is removed.

GK100360

5-59

5.8. Service procedure

Maintenance

Lubrication WARNING â&#x2014;?

Apply the parking brake, and lock the front and rear frame with the safety bar and pin.

â&#x2014;?

Lower the work equipment to the ground, then stop the engine and securely lock the work equipment control lever.

Using a grease gun, pump in grease through the grease fittings marked by the arrows. After greasing, wipe off any old grease that is pressed out. 1. Front cardan shaft (2 points)

GK100361

2. Centre cardan shaft (2 points)

GK100362

3. Rear cardan shaft (2 points)

GK100363

5-60

Maintenance

5.8. Service procedure

4. Engine stop motor linkage (1 point)

5-61

5.8. Service procedure

Maintenance

Checking the tightening parts of the turbo-charger Contact your responsible Komatsu dealer to have the tightening parts checked.

Checking the play of the turbo-charger rotor Ask your responsible Komatsu dealer to check the play of the turbo-charger rotor.

Replacing the anti-corrosive filter cartridge 1. Screw in valve (1) at the side of the corrosion resistor. 2. Using the filter wrench provided, screw off the cartridge (2). 3. Coat the seal surface of the new cartridge with engine oil and install it to the filter holder. 4. For the re-assembly, bring the gasket into contact with the seal surface of the filter holder, then tighten by approx. 2/3 turn. 5. After replacement, open valves (1) at the side of the corrosion resistor. 6. Start the engine and check that there is no water leaking from the filter seal surface.

Checking the accumulator gas pressure Each time you perform the operations described in the sections Every 1000 Service Hours or Annual Maintenance or when replacing safety-relevant parts in the pre-defined intervals, you should ask your Komatsu dealer to check the accumulator gas pressure. NOTE In countries with a hot climate, the responsible Komatsu dealer must check the gas-pressure of the pressure reservoir already every 650 hours.

5-62

1 2

Maintenance

5.8. Service procedure

5.8.9. Every 2000 service hours It is recommended to include all maintenance operations described in the sections Every 50, Every 100, Every 250, Every 500 and Every 1000 Service Hours while performing the following tasks.

Changing the oil in the hydraulic tank, replacing the hydraulic filter inserts WARNING

Immediately after machine operation, the oil is hot. Therefore, wait for the oil to cool down before changing it. When removing the oil filler cap, turn it slowly to release the internal pressure, then remove it carefully.

Keep the following items at hand for the oil change: â&#x2014;?

Collecting container with sufficient capacity

â&#x2014;?

Oil quantity required for refilling according to the table "Lubricants, Fuel etc. and Filling Capacities"

GK100364

1. Lower the bucket horizontally to the ground and apply the parking brake, then stop the engine. 2. Remove the bolt, then remove the cover. 3. Remove the cap from oil filler port (F). F 4. Set a collecting container under drain plug (1). 5. Remove drain plug (1). 6. Open drain valve (2) gradually to drain the oil. 7. After draining the oil, close drain valve (2), then tighten drain plug (1). 2

Tightening torque Drain plug (1) : 60 - 78 Nm Drain plug (2) : 50 - 78 Nm 1

GK100365

8. Remove mounting bolts (4) from the 2 filter covers (3) at the top of the tank, then remove the covers. When doing this, the cover may fly off because of the string force, so press down on the cover while removing the bolts. 9. Remove spring (5) and bypass valve (6), then remove the insert (7).

3 5

10. Check that there is no foreign matter inside the tank before cleaning it. 11. Install a new insert, then install bypass valve (6), spring (5) and cover (3). If the O ring of the cover is damaged or detoriated, replace it with a new part.

6 7 GK100366

5-63

5.8. Service procedure

Maintenance

12. When installing the cover bolts, press down on the cover and tighten the bolts evenly. 13. Add engine oil through oil filler port (F) to the specified level, then install cap (F). For details about the recommended oil, see section "5.4. Lubricants and operating means" on page 5-12. 14. Check that the hydraulic oil is at the correct level. For details, see section "5.8.5. Every 100 hours service" on page 5-47. 15. Run the engine at low idling and extend and retract the mast and dump cylinders 4 - 5 times. Be careful not to move the cylinder up to its stroke end (stop approx. 100 mm (3.94 in) before. NOTE If the engine is run immediately at high speed or the cylinder is moved up to its stroke, the air inside the cylinder will damage the piston packing. 16. Then, move the mast and dump cylinders up to their stroke end 3 - 4 times, then stop the engine. 17. Check the hydraulic oil level and fill up oil to the specified level. Then install cap (F). 18. Next, increase the engine speed and repeat the procedure in step 16. 19. Check that the hydraulic oil is at the correct level. For details, see section "5.8.5. Every 100 hours service" on page 5-47. 20. Check that there is no leakage of oil from the filter cover mount.

5-64

Maintenance

5.8. Service procedure

Replacing the hydraulic tank breather element WARNING Immediately after machine operation, the oil is hot. Therefore, wait for the oil to cool down before changing it. When removing the oil filler cap, turn it slowly to release the internal pressure, then remove it carefully.

1. Remove the cap of oil filler port (F). 2. Remove the snap ring on breather (1), then remove the breather cap.

3. Replace the filter element, then re-install cap and snap ring. 4. Tighten the cap of oil filler port (F). NOTE It is possible to replace the element with the breather installed in the tank. However, if the breather is removed, do not wrap the taper thread of the breather with seal tape before its re-assembly, and do not re-tighten too hard.

5-65

5.8. Service procedure

Maintenance

Changing the axle oil WARNING After machine operation, the oil is hot. Therefore, always wait for the temperature to go down before starting these works.

Prepare the following: â&#x2014;?

Collecting container: min. 130 l capacity

â&#x2014;?

Refill capacity (both front and rear): 65 l each

1. Set collecting containers under drain plugs. 2. Remove both oil filler plugs (1) at the front and rear, then remove drain plugs (2) to drain the oil.

1 2

GK100367

2 1

GK100368

3. Remove both drain plugs (3) at each side and drain the oil.

5-66

Maintenance

5.8. Service procedure

4. Stop the machine so that the drain plug (4) of the final drive is at the bottom. Remove oil filler plug (5) and drain plug (4) and drain the oil. 5. After draining the oil, clean drain plugs (2), (3) and (4), then re-install them. 6. Add oil up to the specified level through the oil filler ports (1 and 5) of the axle housing and left and right final drives. Use the same procedure to change the oil for the front and rear axles.

5 4

For details about the recommended oil, see section "5.4. Lubricants and operating means" on page 5-12. 7. After adding oil, check whether the oil is at the specified level. For details, see section "5.8.2. Maintenance upon demand" on page 5-21. NOTE For operations requiring the brake to be used frequently, change the axle oil in shorter intervals.

5-67

5.8. Service procedure

Checking the alternator starter motor Contact your Komatsu dealer to arrange an inspection or repair. If the engine is started frequently, let the inspection be performed every 1000 service hours.

Checking and adjusting the valve clearance of the engine Since special-purpose tools are required for the check and adjustment, it is recommended to have this check performed by the responsible Komatsu trader.

Checking the brake disc wear Ask your Komatsu dealer to check and repair the brake disc.

Checking the shock absorber Check that there are no cracks or peeling on the external surface of the rubber. If any cracks or peeling are found, contact your Komatsu dealer to have the parts replaced.

Replacing the element in the recirculating and fresh air filter of the air-conditioning system Remove both the recirculating and fresh air filter in the same way as for cleaning and replace them. For cleaning and recirculating air filter, see section "Cleaning the inserts of the recirculation filter of the airconditioning system" on page 5-53. For cleaning the fresh air filter, see section "Cleaning the inserts of the fresh air filter of the air-conditioning system" on page 5-48.

Cleaning and checking the turbo-charger If there is carbon or oil sludge stuck to the blower impeller, it will lower the performance of the turbocharger or cause it to break; thus you should ask your Komatsu dealer to perform the cleaning.

5-68

Maintenance

5.8. Service procedure

Replacing the filter in the brake storage unit CAUTION This work may only be performed by a competent garage!

1. Unscrew the hydraulic tank cap, in order to depressurise the tank. 2. Unscrew the four screws (1). 3. Lift off the cover (2) cautiously with a screwdriver. 4. Remove the filter cartridge (3). 5. Remove the guiding piece (4). 6. Clean the interior of the filter housing, the cover and the guiding piece. 7. Replace the O-ring (5). 8. Re-insert the guiding piece (4) and press it firmly into place. 9. Insert a new filter (3).

1 2 5 3 4

10. Set up the cover (2) with a new O-ring (5), re-tighten the screws (1) manually. 11. Regularly tighten the screws (1) crosswise until the cover (2) fits tightly to the housing.

GK100371

12. Tighten the four screws (1) crosswise with 28 Nm. 13. Start the engine operate the brake several times. 14. Check whether the cover (1) fits tightly.

5-69

5.8. Service procedure

5.8.10. Every 4000 service hours Maintenance for every 50, 100, 250, 500, 1000, 1500 and 2000 hours should be performed at the same time.

Checking the water pump Check that there is no play in the pulley, grease leakage, water leakage or clogging of the drain hole. If any abnomality is found, please contact your Komatsu distributor for disassembly and repair or replacement.

5-70

Maintenance

Technical data

6. Technical data

6-1

6.1. Technical data

6.1.

Technical data

WA470-3 Performance Bucket loading capacity

4.2 m3

Normal load

7,560 kg 1st

6.1 km/h

2nd

11.1 km/h

3rd

20.0 km/h

4th

35.3 km/h

1st

6.4 km/h

2nd

11.8 km/h

3rd

21.0 km/h

4th

35.8 km/h

Forward

Travelling speed

Reverse

Tractive force, max.

186.3 kN Over bucket

7,109 mm

Over tires

6,176 mm

Min. turning radius

Engine Model

Komatsu SAD125E-2 diesel engine

Flywheel horsepower (DIN 70020)

202 kW / 282 PS / 278 hp / 2100 min -1

Max. torque

1299 Nm / 1300 min -1

Starting motor

24 V 7.5 kW

Alternator

24 V 50 A

Battery

2 x 12 V 160 Ah

6-2

Technical data

6.2.

6.2. Noise emission levels

Noise emission levels

The EU directive 95/27/EC requires the attachment of two plates indicating the machine noise levels: 1

plate for the sound pressure level

LpA =

75 dB/A

plate for the sound power level

LWA=

109 dB/A

No alterations may be made to the machine which could have an influence on the noise emission levels.

6.3.

Vibration level

When used for its intended purpose, levels of vibration for the earthworking machine transmitted from the operator's seat are lower or equal to the test vibrations for the relative machinery class in compliance with ISO 7096. The actual accelaration value of the upper limbs is less than 2.5 m/s². The actual acceleration value for the body is less than 0.76 m/s². These values were determined using a representative machine and with the help of the measurement procedures that are defined in the directives ISO 2631/1 and ISO 5349.

6.4.

Limit values for slopes

Maximum slope angle for machine operation If operating the machine on a slope, its angle must not exceed 35° uphill, downhill or sideways. If you angle the machine at more than 35° during operation, the motor, transmission, hydraulic system or axles, will not be supplied with sufficient oil and can be damaged. WA470-3

WA470-3 Magnum

A uphill

35°

B downhill

35°

C sideways

35°

GK100372

6-3

6.4. Limit values for slopes

Technical data

Tilt angle, static The tilt angle is a calculated value. It indicates the angle at which the machine at rest can stand on a slope without tipping over. You must not work with the machine at these angles as the motor, transmission, hydraulic system or axles, will not be supplied with sufficient oil and can be damaged. The specified angle refers to the transport position. The angle changes if you raise or lower the work unit. WA470-3

WA470-3 Magnum

A up hill with operating load up hill without operating load

62° 52°

62° 53°

B down hill with operating load down hill without operating load

34° 53°

32° 51°

C lateral with operating load lateral without operating load

41° 41°

40° 40°

GK100372

6-4

Special equipment and attachments

7. Special equipment and attachments

Further options can be found in the chapter "3. Operation" on page 3-1.

7-1

7.1. ALS-electronics

7.1.

Special equipment and attachments

ALS-electronics

Always read this section before installing and operating the ALSElectronics as safe as possible.

7.1.1. Structure and functioning principle of the ALS-electronics â&#x2014;?

The ALS-Electronics uses the hydraulic spring effect of the hydraulic accumulator installed to the circuit at the lift cylinder base end to absorb the vibration of the chassis when the machine is travelling. This enables the machine to travel smoothly at high speed.

â&#x2014;?

The ALS-Electronics consists of the ALS-Electronics switch, hydraulic accumulator and solenoid valves. When the travel damper switch is turned ON, the solenoid valves open, the circuit at the lift cylinder base end is connected with the hydraulic accumulator.

7.1.2. Precautionary measures for switching on the ALS-electronics WARNING If the ALS system is switched on during a journey, or when the working attachment is in raised position, it may move up or down depending upon the bucket load. For this reason, extreme caution is advised when operating the switch.

When inspecting and servicing the machine, also lower the work equipment to the ground then turn the ALS-Electronics switch OFF before beginning to service. NOTE The ALS system is activated when the transmission is shifted in 2nd to 4th gear and the machine is traveling at a speed higher than 5 km/h.

7-2

Special equipment and attachments

7.1. ALS-electronics

7.1.3. Operating the als-electronics

Switching ON the ALS-Electronics:

Press the ALS-Electronics switch; the control lamp is lit.

Switching OFF the ALS-Electronics:

Re-press the ALS-Electronics switch; the control lamp goes out.

WORK MODE H S Ec

SPEED

CHECK CAUTION PARKING BRAKE

NOTE

Pilot lamp

●

If, when the boom is raised, the boom-lift limit feature is activated, the ALS system is automatically switched off.

●

To ensure that the ALS system can remain fully effective when the machine is underway, do not tilt the bucket all the way through till it touches the limit stops.

●

Do not support the boom when on the road.

GK100260

ALS-Electronic switch

7.1.4. Precautions when handling the accumulator WARNING The accumulator is charged with high-pressure nitrogen gas, which is extremely dangerous, so read the following precautions and be careful to handle the accumulator properly.

●

If any problem or failure occurs with the accumulator, contact immediately your Komatsu dealer.

●

The gas must be charged only by a serviceman from your Komatsu dealer or by a person licensed to handle high pressure gas.

●

Do not strike or bring any flame or heat close to the accumulator when it is charged with gas.

●

Do not make any hole or weld any boss to the accumulator.

●

Always release the gas before disposing of the accumulator or disassembling it for maintenance.

●

Use the air bleed valve to release the gas.

●

Contact your Komatsu dealer every 1,000 hours or once a year to have the gas pressure checked.

7-3

7.1. ALS-electronics

7-4

Special equipment and attachments

Index

8. Index

8-5

Index

A Accumulator ..........................................................7-3 Adding fuel ..........................................................5-41 Air conditioning ....................................................3-43 Operating instructions ...................................3-45 Air conditioning system Cleaning the inserts of the fresh air filter ......5-48 Air-conditioning system Checking the V-belt ......................................5-52 ALS-electronics .....................................................7-2 Pilot lamp ......................................................3-17 Switch ...........................................................3-28 Antifreeze fluid ..................................................3-105 Articulated joint securing .....................................1-28 Articulated-joint lock ............................................1-28 Autoshift transmission switch Autoshift/manual switch ................................3-27 Pilot lamp ......................................................3-17 Axle oils ...............................................................5-14

B Backup alarm ......................................................3-39 Battery Charge ratio ................................................3-106 Connecting/disconnecting ..............................2-9 Filling up battery acid ......................................2-9 Recharging ...................................................4-10 Safety instructions ........................................5-55 Battery main switch (option) ................................3-29 Boom kickout .......................................................3-94 Braking on downhill slopes ..................................3-92 Bucket Level indicator ..............................................3-95 Manual lowering ...........................................2-14 Tilting/dumping .............................................3-84

Maintenance monitor ...................................... 3-4 Special equipment .......................................... 3-8 Control lamps Emergency steering system ................3-51, 5-39 Engine pre-heating ....................................... 3-14 Front working lights ...................................... 3-14 High beam .................................................... 3-15 Parking brake ............................................... 3-13 Rear working lights ....................................... 3-14 Transmission cut off ..................................... 3-14 Turn signal ................................................... 3-15 Turning light switch (option) ......................... 3-17 Warning indicators .......................................... 3-9 Control lever for special equipment ................................... 3-84 for work equipment ....................................... 3-81 Work hydraulic system ................................. 3-81 Control levers ...................................................... 3-30 Directional lever ............................................ 3-32 Work hydraulic system ................................. 3-34 Control monitors Main control monitor ....................................... 3-7 Maintenance monitor ...................................... 3-7 Control system check ........................................... 3-8 Cool box .............................................................. 3-45 Cross drive loading ............................................. 3-89

D Digging ................................................................ 3-85 Dimensions ......................................................... 1-18 Direction changing .............................................. 3-78 Directional lever .........................................3-32, 3-78 Directives .............................................................. 1-2 Driving ................................................................. 3-64

E C Carrying loads .....................................................3-88 CE-conforming equipment ..................................1-21 Central lubrication after storage ...............................................3-109 Pre-start check .......................... 3-46, 3-48, 3-50 Switch ................................................. 3-18, 3-28 Topping up the grease reservoir ...................5-36 Troubleshooting ..............................................4-3 Warning indicator ............................................3-9 Warning lamp ...............................................3-12 Check after stopping the engine .......................3-100 Checking the coolant level ..................................5-40 Cigarette lighter ...................................................3-26 Cold weather operation .....................................3-105 Control elements Fuel gauge ....................................................3-15 Gear shift indicator .......................................3-16 General view ...................................................3-3 Main monitor ...................................................3-4

8-6

Electrical connections ......................................... 5-43 Emergency exit ..................................................... 2-2 Emergency lowering system ............................... 2-14 Emergency steering system ......................3-51, 5-39 Emergency travel operation .................................. 4-8 Engine ................................................................. 4-12 Checking engine oil level .............................. 5-42 Preparation ................................................... 3-49 Start .............................................................. 3-58 Safety instructions ................................. 2-12 Starting with booster cable ........................... 4-12 Start-up ........................................................ 3-46 Switch off ...................................................... 3-99 Technical data ................................................ 6-2 Engine identification plate ..................................... 1-9 Equipment CE-conforming ............................................. 1-21 EU Directives ........................................................ 1-2 Machinery directive ........................................ 1-2

Index

F Filters ...........................................................5-3, 5-10 Fire prevention ...................................................... 2-4 FLOAT position ................................................... 3-81 Fresh air filter insert ............................................ 5-48 Fuel in winter ...................................................... 3-105 Measurement ................................................ 3-15 Fuel filter cartridge Draining water .............................................. 5-36 Fuel gauge .......................................................... 3-15 Fuses Fuse boxes ................................................... 3-40 Slow-blow fuses ............................................ 3-42

G Gear lever ........................................................... 3-32 Stop .............................................................. 3-32 Gear shift indicator .............................................. 3-16 Gears Automatic gear change ................................. 3-75 Changing ...................................................... 3-75 Selection ....................................................... 3-75 General view Machine .......................................................... 3-2 Measuring instruments ................................... 3-3 Grease pump ...................................................... 3-39

H Hydraulic system Checking the oil level .................................... 5-47 Hydraulic oil refilling ...................................... 5-47 Hydraulic tank Opening ........................................................ 3-37

I Indicators .............................................................. 3-8 Special equipment .......................................... 3-8 Inflation pressure table ...................................... 3-102 Intended use ......................................................... 1-6

J Joystick steering (option) Drive Dual lever pilot control ........................... 3-69 Multifunction lever pilot control ............... 3-72 Single lever pilot control ......................... 3-69 Safety measures ........................................... 2-18 Switch ........................................................... 3-29

K Kickdown gear Switch on/off ................................................. 3-76

L Levelling .............................................................. 3-88 Liability .................................................................. 1-4 Loading ......................................................2-16, 3-89

Locking ............................................................. 3-100 Lubricants Grease ...........................................5-2, 5-9, 5-10 Hydraulic oil .................................................. 5-10 Oil .....................................................5-2, 5-7, 5-9 Table .............................................................. 5-6

M Machine ................................................................ 5-2 Cleaning ......................................................... 2-6 Driving .......................................................... 3-64 Features ......................................................... 1-6 General overview ........................................... 3-2 Intended use .................................................. 1-6 Loading ............................................... 1-28, 2-19 Modifications .................................................. 1-3 Parking .........................................2-3, 2-17, 3-96 Running in ...................................................... 1-7 Securing ....................................................... 1-28 Steering ........................................................ 3-79 Stopping ....................................................... 3-79 Towing ............................................................ 4-4 Transport ............................................. 1-28, 2-19 Turning ......................................................... 3-79 Washing ......................................................... 5-4 Machine identification plate .................................. 1-8 Main monitor ......................................................... 3-4 Maintenance Accumulator gas pressure ........................... 5-62 after completion of work ............................. 3-107 after storage ............................................... 3-109 after the cold weather period ...................... 3-107 Air cleaner element ...................................... 5-21 Air conditioning system Cleaning the condenser ......................... 5-35 Recirculation filter insert ........................ 5-53 Air-conditioning system Cleaning inserts of fresh air filter ........... 5-48 Alternator starter monitor ............................. 5-68 Axle Changing the axle oil ............................. 5-66 Checking the axle oil breather ............... 5-30 Checking the axle oil level ..................... 5-29 Battery check ............................................... 5-55 Before start-up ............................................. 3-46 Changing the anti-corrosive filter cartridge .. 5-62 Checking the tyre inflation pressure ............. 5-46 Cleaning the machine .................................... 5-2 Cleaning the radiator .................................... 5-31 Cooling system Cleaning the cooling system .................. 5-24 Coolant change ..................................... 5-24 during storage ............................................ 3-108 Dust pre-extractor ........................................ 5-24 Electrical connections .................................. 5-43 Electrical system .......................................... 5-10 Engine Changing engine oil ............................... 5-50 Checking engine oil level ....................... 5-42

8-7

Index

Oil filter cartridge ....................................5-50 Refilling engine oil ..................................5-42 Fresh air filter ................................................5-48 Fuel Replacing the filter cartridge ..................5-56 Fuel level checking .......................................5-41 Fuel tank Adding fuel .............................................5-41 Draining water ........................................5-46 Removing deposits .................................5-46 Guide ..............................................................5-2 Hydraulic system Changing the filter inserts ......................5-63 Changing the hydraulic oil ......................5-63 Checking the hydraulic oil level ..............5-47 Refilling hydraulic oil ..............................5-47 Lubrication ....................................................5-60 Rear axle pivot pin .................................5-49 Work equipment control lever ................5-35 Monitor ............................................................3-4 Monitor panel ................................................5-38 Operational brake .........................................5-45 Parking brake ...............................................5-44 Replacing the bolt-ON cutting edge ..............5-32 Replacing the bucket teeth ...........................5-33 Service meter .................................................5-2 Transmission Changing oil in transmission case ..........5-58 Checking the transmission oil level ........5-28 Cleaning the oil strainer .........................5-58 Cleaning transmission case breather .....5-59 Replacing transmission oil filter insert ....5-57 Washer fluid ....................................................5-2 Washing the machine .....................................5-4 Water pump ..................................................5-70 Wheel hub nuts .............................................5-53 Window washing-fluid level ...........................5-35 Malfunctions Engine stops .................................................3-92 Wheel brake .................................................3-91 Measuring instruments Fuel gauge ....................................................3-15 Gear shift indicator .......................................3-16 Hourmeter .....................................................3-16 Speedometer ................................................3-16 Temperature gauge for coolant ....................3-15 Torque converter oil temperature .................3-16 Motor Filling up coolant .............................................2-7 Filling up engine oil .........................................2-7 Multi-function control lever Operating the work equipment .....................3-84

O Operating conditions Operation Close to power transmission lines ..........2-15 on loose soil ...........................................2-17 on snow ..................................................2-16

8-8

Operating data .................................................... 1-18 Operation ALS-electronics .............................................. 7-3 Boom kickout ................................................ 3-94 Braking on downhill slopes ........................... 3-92 Bucket .......................................................... 3-84 Bucket positioner .......................................... 3-95 Changing direction ....................................... 3-78 Changing gears ............................................ 3-75 Checking the control system .......................... 3-8 Cross drive loading ....................................... 3-89 Digging ......................................................... 3-85 Driving .......................................................... 3-64 Gears Priority gear change ............................... 3-77 in cold weather ........................................... 3-105 Kickdown gear change ................................. 3-76 Levelling ....................................................... 3-88 Loading ........................................................ 2-16 Loading/carrying ........................................... 3-88 Multi function control lever ............................ 3-84 Operator’s seat ............................................. 3-55 Operator’s seat adjustment .......................... 3-55 Pilling up loads ............................................. 3-90 Preparing storage ....................................... 3-108 Pushing ........................................................ 3-88 Rear-view adjustment ................................... 3-57 Seat belt adjustment .................................... 3-56 Stopping ....................................................... 3-79 Switching ON/OFF air condition ................... 3-43 Turning on slopes ......................................... 3-92 Visual check prior to starting ........................ 3-46 V-shape loading ........................................... 3-89 Wheel loader ................................................ 3-85 Work equipment ........................................... 3-81 Operation elements Safety bar ..................................................... 3-38 Steering column tilt lever .............................. 3-37 Operational brake check ..................................... 5-45 Operator’s seat Adjustment ................................................... 3-55

P Parking brake ...................................................... 3-27 Check ........................................................... 5-44 Releasing ....................................................... 4-7 Pedals ................................................................. 3-30 Accelerator pedal ......................................... 3-36 Brake pedals ................................................ 3-36 Performance ......................................................... 6-2 Periodical replacement Safety-critical parts ....................................... 5-17 Precautionary measures Driving up/down ............................................ 3-92 During machine travel .................................. 3-93 In-water operation ........................................ 3-91 Pre-Start checks ................................................. 3-46 Protective clothing ................................................ 2-2 Pushing ............................................................... 3-88

Index

R Rear view mirror adjustment ............................... 3-57 Replacement parts ................................................ 5-2 Wearing parts ............................................... 5-11 Roll over protection ............................................... 2-7

S Safety bar ............................................................ 3-38 Safety belt Adjustment .................................................... 3-57 Fastening/removing ...................................... 3-56 Safety equipment Fire extinguisher ............................................. 2-5 First aid kit ...................................................... 2-5 ROPS ............................................................. 2-7 Safety instructions Accumulator .................................................... 7-3 Asbestos dust ................................................. 2-6 Attachments .................................................... 2-1 Battery ............................................................ 2-9 Driverâ&#x20AC;&#x2122;s cabin ................................................ 2-10 Driving .......................................................... 2-12 Engine coolant ................................................ 2-7 Engine oil ........................................................ 2-7 Fire prevention ................................................ 2-4 General ........................................................... 2-1 Hydraulic oil .................................................... 2-7 Information ...................................................... 1-4 Loading ......................................................... 2-16 Machine transport ......................................... 2-19 Maintenance ................................................... 5-3 Maintenance/inspection .................................. 5-2 Mirrors, windows and lighting ....................... 2-11 Parking the machine ....................................... 2-3 Protective clothing .......................................... 2-2 Special equipment .......................................... 2-1 Subsequent installation .................................. 1-3 Workplace ............................................2-10, 2-16 Safety-critical parts Periodical replacement ................................. 5-17 Seat belt Belt length adjustment .................................. 3-57 Fastening/removing ...................................... 3-56 Serial number ........................................................ 1-9 Speedometer ...................................................... 3-16 Standards Machinery directive ......................................... 1-2 Start preparation ................................................. 3-49 Start switch ......................................................... 3-20 Starting the engine .............................................. 2-12 Start-up ............................................................... 3-46 Checks before starting .................................. 3-49 Preparation ..........................................3-46, 3-58 Steering ............................................................... 3-79 Steering column tilt lever ..................................... 3-37 Stopping .............................................................. 3-99 Substances required for operation Coolant ....................................................5-3, 5-9 Fuel ..........................................................5-3, 5-8

Table .............................................................. 5-6 Switches ............................................................. 3-18 Air conditioning ............................................. 3-43 Cigarette lighter ............................................ 3-26 Dimmer switch .............................................. 3-22 Fan ............................................................... 3-43 Fresh/recirc selector ..................................... 3-44 Front windscreen wiper ................................ 3-25 Front working lights ...................................... 3-21 Gear-change lock ......................................... 3-25 Hazard warning switch ................................. 3-23 Horn button .................................................. 3-22 Kickdown switch ........................................... 3-24 Lamp switch ................................................. 3-21 Parking brake ............................................... 3-27 Rear wiper .................................................... 3-26 Rear working lights ....................................... 3-21 Start switch ................................................... 3-20 Temperature control switch .......................... 3-44 Transmission CUT-OFF switch .................... 3-20 Turn signal lever ........................................... 3-22

T Technical data ...................................................... 6-2 Limit values for slopes Max. slope angle ..................................... 6-3 Static tilt angle ......................................... 6-4 Noise emission level ...................................... 6-3 Vibration level ................................................. 6-3 Tilt angle static ...................................................... 6-4 Towing pin .......................................................... 3-38 Towing the machine ............................................. 4-4 Tractive force ........................................................ 6-2 Transport Machine ........................................................ 2-19 Travelling speed ................................................... 6-2 Troubles Chassis ........................................................ 4-15 Axles ...................................................... 4-15 Brakes ................................................... 4-16 Hydraulic system ................................... 4-17 Parking brake ........................................ 4-16 Transmission ......................................... 4-15 Electrical system .......................................... 4-14 Engine .......................................................... 4-18 Machine runs out of fuel ................................. 4-2 Turn signal lever ................................................. 3-22 Turning ............................................................... 3-79 Turning light switch (Option) ............................... 3-28 Turning radius ....................................................... 6-2 Tyre pressure for machine operation ................ 3-101 Tyres ................................................................. 3-101 Check ............................................................. 5-4 Wear and tear test ...................................... 3-101

V V-belt tension check ........................................... 5-52 Vibration level ....................................................... 6-3 V-shape loading .................................................. 3-89 8-9

Index

W Warning lamp Air cleaner ....................................................3-12 Battery ..........................................................3-12 Brake oil pressure .........................................3-11 Caution .........................................................3-10 Coolant level warning light ............................3-10 Engine oil level .............................................3-11 Engine oil pressure .......................................3-11 Washer fluid ..........................................................5-2 Weight .................................................................1-18 Winter Operation ....................................................3-105 Work equipment Adjustment ....................................................3-94 Control lever .................................................3-81 Floating .........................................................3-81 Holding .........................................................3-81 Lowering .......................................................3-81

8-10

Operation ..................................................... 3-81 Raising ......................................................... 3-81 Work hydraulic system Control lever ........................................3-34, 3-81 Multi-function control lever ........................... 3-35 Safety lock lever ........................................... 3-33 Work mode selector switch Control monitor ............................................... 3-8 Pilot lamps .................................................... 3-17 Selection switch ............................................ 3-28 Work mode selection .................................... 3-62 Work unit Manual lowering ........................................... 2-14 Working conditions Asbestos material ........................................... 2-6 Working at high temperatures ........................ 2-7 Workplace Safety ........................................................... 2-10 Safety instructions ...............................2-15, 2-17