Pioneer Dvr-530h-s 630h-s Service Manual Repair Guide by www.heydownloads.com

OPEN/CLOSE

ORDER NO.

HDD/DVD

ONE TOUCH COPY

RRV3149

PULL-OPEN

REC

STANDBY/ON

DVR-530H-S

DVD RECORDER

DVR-530H-S DVR-530H-AV DVR-630H-S

THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S). Model

Type

Power Requirement

Region No.

Serial No. Please confirm 3rd & 4th alphabetical letters.

DVR-530H-S

WYXV

AC220-240V

&&DL######$$

DVR-530H-S

WVXV

AC220-240V

&&DL######$$

DVR-530H-AV

WYXV

AC220-240V

&&DL######$$

DVR-530H-AV

WVXV

AC220-240V

&&DL######$$

DVR-630H-S

WYXV

AC220-240V

&&DL######$$

DVR-630H-S

WVXV

AC220-240V

&&DL######$$

รท

When servicing this model, some service procedures may reset the customer settings to the factory default settings. Make sure to explain this to the customer.

An HDD (Hard Disc Drive) is mounted in this product. The HDD is a precision instrument very vulnerable to shock and electrostatic charges. Please read "7.3 Cautions on Handling the HDD" in this manual and exercise sufficient caution when handling the HDD itself, as well as the product with the HDD built in. When an HDD becomes defective and inoperable, restoration of the user's data recorded on the HDD, or copying of the user's recorded data to other media (such as a new HDD) is totally impossible. Before servicing, OBTAIN THE USER'S PRIOR CONSENT to that effect. The user must be made aware that all recorded data are deleted if the HDD is intialized.

For details, refer to "Important Check Points for Good Servicing" . PIONEER CORPORATION

4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A. PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936

PIONEER CORPORATION 2005 T-ZZV MAY 2005 printed in Japan

SAFETY INFORMATION A

LABEL CHECK LASER DIODE CHARACTERISTICS MAXIMUM OUTPUT POWER: 100 mW WAVELENGTH: 654 - 662 nm

IMPORTANT THIS PIONEER APPARATUS CONTAINS LASER OF CLASS 1. SERVICING OPERATION OF THE APPARATUS SHOULD BE DONE BY A SPECIALLY INSTRUCTED PERSON.

LASER DIODE CHARACTERISTICS MAXIMUM OUTPUT POWER: 5 mW WAVELENGTH: 770 - 810 nm

Y/O

/CL

HD E TOU

D/D

-O

DRW2247 PE

Additional Laser Caution 1. The ON/OFF(ON:low level,OFF:high level) status of the CLAMP signals for detecting the loading state are detected by the drive CPUs, and the design prevents laser diode oscillation when the CLAMP signal turns OFF. In normal operation, if no disc is clamped, the laser diode oscillation is disabled. However, the interlock does not always operate in the test mode. 2. When the cover is opened, close viewing of the objective lens with the naked eye will cause exposure to a Class 3A laser beam.

DVR-530H-S 1

[Important Check Points for Good Servicing] In this manual, procedures that must be performed during repairs are marked with the below symbol. Please be sure to confirm and follow these procedures. A

1. Product safety Please conform to product regulations (such as safety and radiation regulations), and maintain a safe servicing environment by following the safety instructions described in this manual. 1 Use specified parts for repair. Use genuine parts. Be sure to use important parts for safety. 2 Do not perform modifications without proper instructions. Please follow the specified safety methods when modification(addition/change of parts) is required due to interferences such as radio/TV interference and foreign noise. 3 Make sure the soldering of repaired locations is properly performed.

When you solder while repairing, please be sure that there are no cold solder and other debris. Soldering should be finished with the proper quantity. (Refer to the example) 4 Make sure the screws are tightly fastened. Please be sure that all screws are fastened, and that there are no loose screws. 5 Make sure each connectors are correctly inserted. Please be sure that all connectors are inserted, and that there are no imperfect insertion. 6 Make sure the wiring cables are set to their original state. Please replace the wiring and cables to the original state after repairs. In addition, be sure that there are no pinched wires, etc.

7 Make sure screws and soldering scraps do not remain inside the product. Please check that neither solder debris nor screws remain inside the product. 8 There should be no semi-broken wires, scratches, melting, etc. on the coating of the power cord. Damaged power cords may lead to fire accidents, so please be sure that there are no damages. If you find a damaged power cord, please exchange it with a suitable one. 9 There should be no spark traces or similar marks on the power plug. When spark traces or similar marks are found on the power supply plug, please check the connection and advise on secure connections and suitable usage. Please exchange the power cord if necessary. 0 Safe environment should be secured during servicing.

When you perform repairs, please pay attention to static electricity, furniture, household articles, etc. in order to prevent injuries. Please pay attention to your surroundings and repair safely.

2. Adjustments To keep the original performance of the products, optimum adjustments and confirmation of characteristics within specification. Adjustments should be performed in accordance with the procedures/instructions described in this manual.

3. Lubricants, Glues, and Replacement parts Use grease and adhesives that are equal to the specified substance. Make sure the proper amount is applied.

4. Cleaning For parts that require cleaning, such as optical pickups, tape deck heads, lenses and mirrors used in projection monitors, proper cleaning should be performed to restore their performances.

5. Shipping mode and Shipping screws To protect products from damages or failures during transit, the shipping mode should be set or the shipping screws should be installed before shipment. Please be sure to follow this method especially if it is specified in this manual.

DVR-530H-S 5

CONTENTS SAFETY INFORMATION ..................................................................................................................................... 2 1. SPECIFICATIONS ............................................................................................................................................ 5 2. EXPLODED VIEWS AND PARTS LIST ............................................................................................................ 8 2.1 PACKING ................................................................................................................................................... 8 2.2 EXTERIOR SECTION.............................................................................................................................. 10 2.3 FRONT PANEL SECTION ....................................................................................................................... 12 3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM .......................................................................................... 14 3.1 BLOCK DIAGRAM ................................................................................................................................... 14 3.1.1 OVERALL BLOCK DIAGRAM............................................................................................................ 14 3.1.2 MAIN ASSY ....................................................................................................................................... 16 3.2 OVERALL WIRING DIAGRAM................................................................................................................. 18 3.3 TUNB ASSY ............................................................................................................................................. 20 3.4 JACB(1/2) and FLJB ASSYS ................................................................................................................... 22 3.5 JACB ASSY(2/2) ...................................................................................................................................... 24 3.6 DVJB ASSY.............................................................................................................................................. 26 3.7 ATAB ASSY .............................................................................................................................................. 27 3.8 PSWB and RSWB ASSYS....................................................................................................................... 28 3.9 MAIN ASSY(1/5) ...................................................................................................................................... 30 3.10 MAIN ASSY(2/5) .................................................................................................................................... 32 3.11 MAIN ASSY(3/5) .................................................................................................................................... 34 3.12 MAIN ASSY(4/5) .................................................................................................................................... 36 3.13 MAIN ASSY(5/5) .................................................................................................................................... 38 3.14 SCRB ASSY .......................................................................................................................................... 40 3.15 POWER SUPPLY UNIT.......................................................................................................................... 42 3.16 WAVE FORMS ....................................................................................................................................... 44 4. PCB CONNECTION DIAGRAM ..................................................................................................................... 48 4.1 TUNB ASSY ............................................................................................................................................. 49 4.2 JACB, FLJB, DVJB and ATAB ASSYS ..................................................................................................... 52 4.3 PSWB and RSWB ASSYS....................................................................................................................... 56 4.4 MAIN ASSY ............................................................................................................................................. 60 4.5 SCRB ASSY ............................................................................................................................................ 64 4.6 POWER SUPPLY UNIT............................................................................................................................ 66 5. PCB PARTS LIST ........................................................................................................................................... 68 6. ADJUSTMENT ............................................................................................................................................... 72 7. GENERAL INFORMATION ............................................................................................................................. 73 7.1 DIAGNOSIS ............................................................................................................................................. 73 7.1.1 MODEL TYPE SETTING ................................................................................................................... 75 7.1.2 CPRM ID NUMBER AND DATA SETTING......................................................................................... 76 7.1.3 FIRMWARE DOWNLOADING METHOD........................................................................................... 80 7.1.4 VIDEO ADJUSTMENT FOR SPECIFIC AREA .................................................................................. 83 7.1.5 SERVICE MODE................................................................................................................................ 87 7.1.6 DV SERVICE MODE ........................................................................................................................ 101 7.1.7 EPG SERVICE MODE (Except DVR-433H model).......................................................................... 104 7.1.8 AGING MODE.................................................................................................................................. 106 7.1.9 HDD CHECK MODE ........................................................................................................................ 108 7.1.10 SETUP SEQUENCE ...................................................................................................................... 114 7.1.11 DISASSEMBLY .............................................................................................................................. 115 7.2 IC ........................................................................................................................................................... 121 7.3 CAUTIONS ON HANDLING THE HDD .................................................................................................. 134 7.4 DISC/CONTENT FORMAT .................................................................................................................... 136 8. PANEL FACILITIES ...................................................................................................................................... 138

DVR-530H-S 1

1. SPECIFICATIONS Specifications A

General System. . . . . . . . . . . . . . . . HDD, DVD-Video, DVD-R/RW, Video-CD, Super VCD, CD, CD-R/RW (WMA, MP3, JPEG, CD-DA) Power requirements . . . . . . . . . . . . 220 − 240 V, 50/60 Hz Power consumption DVR-630H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49 W DVR-530H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48 W Power consumption in standby mode . . . . . . . . . . . 0.93 W (Front panel display: off) Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1 kg Dimensions . . . . . . . . . . . . 420 (W) x 59 (H) x 273 (D) mm Operating temperature . . . . . . . . . . . . . . . . +5°C to +35°C Operating humidity . . . . . . . . . . . . . . . . . . . . . . 5% to 85% (no condensation) TV system . . . . . . . . . . . . . . . . . . . . . . . . . . PAL/SECAM/ NTSC (external input only) Recording Recording format . . . . . . . . . . . . . . DVD Video Recording DVD-VIDEO Recordable discs DVD-RW (DVD Re-recordable disc) DVD-R (DVD Recordable disc) Video recording format Sampling frequency . . . . . . . . . . . . . . . . . . . . . . . 13.5MHz Compression format . . . . . . . . . . . . . . . . . . . . . . . . .MPEG Audio recording format Sampling frequency. . . . . . . . . . . . . . . . . . . . . . . . . .48kHz Compression format . . . . . . . .Dolby Digital or Linear PCM (uncompressed) Recording time HDD (250GB) XP+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Approx. 36 hours Fine (XP) . . . . . . . . . . . . . . . . . . . . . . . . .Approx. 53 hours Standard Play (SP) . . . . . . . . . . . . . . . . Approx. 106 hours Long Play (LP). . . . . . . . . . . . . . . . . . . . Approx. 212 hours Extended Play (EP) . . . . . . . . . . . . . . . .Approx. 319 hours Super Long Play (SLP) . . . . . . . . . . . . . Approx. 425 hours Super Extended Play (SEP) . . . . . . . . . Approx. 532 hours Manual Mode (MN) . . . . . . . . . . . . Approx. 36 − 711 hours HDD (160GB) XP+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Approx. 23 hours Fine (XP) . . . . . . . . . . . . . . . . . . . . . . . . .Approx. 34 hours Standard Play (SP) . . . . . . . . . . . . . . . . Approx. 68 hours Long Play (LP). . . . . . . . . . . . . . . . . . . .Approx. 136 hours Extended Play (EP) . . . . . . . . . . . . . . . Approx. 204 hours Super Long Play (SLP) . . . . . . . . . . . . .Approx. 272 hours Super Extended Play (SEP) . . . . . . . . . Approx. 340 hours Manual Mode (MN) . . . . . . . . . . . . Approx. 23 − 455 hours

DVD-R/DVD-RW Fine (XP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . Approx. 1 hour Standard Play (SP) . . . . . . . . . . . . . . . . . . . Approx. 2 hours Long Play (LP) . . . . . . . . . . . . . . . . . . . . . . . Approx. 4 hours Extended Play (EP) . . . . . . . . . . . . . . . . . . . Approx. 6 hours Super Long Play (SLP) . . . . . . . . . . . . . . . . Approx. 8 hours Super Extended Play (SEP). . . . . . . . . . . . Approx. 10 hours Manual Mode (MN) . . . . . . . . . . . . . . . Approx. 1 − 13 hours

Tuner Receivable channels

SECAM B/G PAL B/G

PAL I

Frequency

Channel

Frequency

Channel

VHF (low)

47 - 89 MHz

44 - 89 MHz

VHF (high)

104 - 300 MHz

A-C X-Z D-J 11, 13 S1 - S20

Hyper UHF

302 - 470 MHz 470 - 862 MHz

E2 - E4 X-Z E5 - E12 S1 - S20 M1 - M10 U1 - U10 S21 - S41 E21 - E69

302 - 470 MHz 470 - 862 MHz

S21 - S41 E21 - E69

VHF (low)

Frequency 49 - 65 MHz

Channel FB, FC1, FC

Frequency 49 - 94 MHz

Channel R1 - R5

VHF (high)

104 - 300 MHz

F1 - F6 B-Q

104 - 300 MHz

R6 - R12 S1 - S20

Hyper UHF

300 - 470 MHz

S21 - S41

302 - 470 MHz

S21 - S41

470 - 862 MHz

21 - 69

470 - 862 MHz

E21 - E69

SECAM L

SECAM D/K PAL D/K

STEREO B/G - A2 I - NICAM L - NICAM B/G - NICAM D/K - NICAM

Timer Programs. . . . . . . . . . . . . . . . . . . . . . . 1 month/32 programs Clock . . . . . . . . . . . . . . . Quartz lock (24-hour digital display) Power off memory . . . . Approx. 5 years (after manufacture)

Input/Output VHF/UHF antenna input/output terminal . . . . . VHF/UHF set 75 Ω (IEC connector) Video input . . . . . . . . . . . . . . . . . . . .Input 1,3 (rear), 2 (front) Input level . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Vp-p (75 Ω) Jacks . . . . . . . . . . . . . . . . . . . . . . AV connector 2 (Input 1), RCA jack (Input 2, 3) Video output . . . . . . . . . . . . . . . . . . . . . . . . . . . .AV1, Output Output level . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Vp-p (75 Ω) Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . .AV connector (AV1) RCA jack (Output) S-Video input . . . . . . . . . . . . . . . . . Input 1, 3 (rear), 2 (front) Y (luminance) - Input level . . . . . . . . . . . . . . . .1 Vp-p (75 Ω) C (colour) - Input level . . . . . . . . . . . . . . .300 mVp-p (75 Ω ) Jacks . . . . . . . . . . . . . . . . . . . . . . .AV connector 2 (Input 1), 4 pin mini DIN (Input 2, 3)

DVR-530H-S 5

S-Video output . . . . . . . . . . . . . . . . . . . . . . . . . AV1, Output Y (luminance) - Output level. . . . . . . . . . . . . .1 Vp-p (75 Ω) C (colour) - Output level . . . . . . . . . . . . .300 mVp-p (75 Ω) Jacks . . . . . . . . . . . . . . . . . . . . . . . . AV connector 1 (AV1), 4 pin mini DIN (Output) Component video output Output level . . . . . . . . . . . . . . . . . . . . . . Y: 1.0 Vp-p (75 Ω) PB, PR: 0.7 Vp-p (75 Ω) Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RCA jacks RGB input Input level . . . . . . . . . . . . . . . . . . . . . . . . . . 0.7 Vp-p (75Ω) Jacks . . . . . . . . . . . . . . . . . . . . . . AV connector 2 (Input 1) RGB output Output level . . . . . . . . . . . . . . . . . . . . . . . . . 0.7 Vp-p (75Ω) Jacks . . . . . . . . . . . . . . . . . . . . . . . . AV connector 1 (AV1) Audio input . . . . . . . . . . . . . . . Input 1, 3 (rear), 2 (front) L/R Input level During audio input . . . . . . . . . . . . . . . . . . . . . . . . . . 2V rms (Input impedance: more than 22 kΩ) Jacks . . . . . . . . . . . . . . . . . . . . . . AV connector 2 (Input 1), RCA jacks (Input 2, 3) Audio output . . . . . . . . . . . . . . . . . . . . . . . . . . . AV1, Output During audio output . . . . . . . . . . . . . . . . . . . . . . . . . 2V rms (Output impedance: less than 1.5 kΩ) Jacks . . . . . . . . . . . . . . . . . . . . . . . . AV connector 1 (AV1), RCA jacks (Output) Control input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Mini jack DV input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 pin (front) (i.LINK/IEEE 1394 standard) G-LINK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mini jack

Supplied accessories Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Dry cell batteries (AA/R6P) . . . . . . . . . . . . . . . . . . . . . . . . . 2 Audio / Video cable (red/white/yellow) . . . . . . . . . . . . . . . . . 1 G-LINK cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 RF antenna cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Power cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Operating Instructions Warranty card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Note: The specifications and design of this product are subject to change without notice, due to improvement.

AV Connectors (21-pin connector assignment) AV connector input/output . . . . . . . . . . . . .21-pin connector This connector provides the video and audio signals for connection to a compatible colour TV or monitor.

PIN no. AV1(RGB)-TV / AV2(INPUT 1) 1. . . . . . . . . . . . . . . . . . . . . . . Audio 2/R out / Audio 2/R out 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . − / Audio 2/R in 11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .G out / G in 3 . . . . . . . . . . . . . . . . . . . . . . . Audio 1/L out / Audio 1/L out 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . − / Audio 1/L in 15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . R or C out / R or C in 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GND 17 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GND 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B out / B in 19 . . . . . . . . . . . . . . . . . . . . . Video out or Y out / Video out 20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . − / Video in or Y in 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Status 21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GND

DVR-530H-S 1

Accessories • RF antenna cable(PAL) ×1 (VDE1075) • Remote control ×1 (VXX2969) STANDBY/ON ONEOUCH T COPY

• Power cable ×1 (ADG7090 : WYXV type)

OPEN/CL OSE

HDD

DVD ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

INPUT SELECT

(ADG7103 : WVXV type)

• Audio / Video cable(1.5m) ×1 (red/white/yellow) (VDE1077)

CLEAR

CLEAR SUBTITLE ANGLE PLA Y MODE

A UDIO

DISC NAVIGATOR

TOP MENU

ENTER HOME MENU

GUIDE

REV SCAN

RETURN

INFO

HELP

PLAY

BACK CM SKIP

CA SE PREVSELECTION NEX T

FWD SCAN

PAUSE ST OPOK

REC STOP REC

DISPLAY

STEP/SLOW

REC MODE TIMER REC

TVCONTROL

• Dry cell batteries ×2 (AA/R6P)

• IR Blaster(3m) ×1 (VDX1010)

TV/DVD

INPUT CHANNELVOL UME TVDIRECT REC SELECT

DVD RECORDER

DVR-530H-S 5

2. EXPLODED VIEWS AND PARTS LIST NOTES: A

2.1 PACKING for DVR-530H-S/WVXV, DVR-630H-S/WVXV 11

for DVR-530H-S/WYXV, DVR-630H-S/WYXV

for DVR-530H-AV/WVXV, WVXV 17

9 10

17 9 10 DVR-530H-S /WVXV only

13 15 16 14 22 21 20

12 19 18 24 23

25 23

WVXV only

WYXV 18 only 19 20 21 26

DVR-530H-S, DVR-630H-S only 6

22 2

DVR-530H-S/WYXV only 3

DVR-530H-S, DVR-630H-S only

32 5 4 1 for WYXV type 26

29 26 for WVXV type

31 28

DVR-530H-S 1

(1) PACKING SECTION PARTS LIST Mark No.

Description

Mark No.

Part No.

1 2 3 4 5

Power Cable Audio / Video Cable (1.5m) RF Antenna Cable Remote Control Unit Battery Cover

See Contrast table (2) VDE1077 VDE1075 See Contrast table (2) See Contrast table (2)

16 17 18 19 20

NSP 6 7 NSP 8 9 10

Dry Cell Battery (R6P, AA) IR Blaster Warranty Card WEEE Caution Card HDD Caution 8L

See Contrast table (2) VDX1010 ARY7065 VRR1065 VRR1063

21 22 NSP 23 NSP 24 NSP 25

Operating Instructions Operating Instructions Operating Instructions Operating Instructions Operating Instructions

See Contrast table (2) See Contrast table (2) See Contrast table (2) See Contrast table (2) See Contrast table (2)

11 12 13 14 15

Description

Part No.

Operating Instructions Dual Layer IM Dual Layer IM Dual Layer IM Dual Layer IM

See Contrast table (2) See Contrast table (2) See Contrast table (2) See Contrast table (2) See Contrast table (2)

Dual Layer IM Dual Layer IM User Card User Card Polyethylene Bag (A4 x2)

See Contrast table (2) See Contrast table (2) See Contrast table (2) See Contrast table (2) See Contrast table (2)

26 27 28 29 30

Polyethylene Bag B5 Left Pad Right Pad Remote Control Holder Packing Case

VHL1088 VHA1386 VHA1387 VHC1139 See Contrast table (2)

31 32

Mirror Mat WEEE Label

VHL1089 See Contrast table (2)

(2) CONTRAST TABLE DVR-530H-S/WYXV, WVXV, DVR-530H-AV/WYXV, WVXV, DVR-630H-S/WYXV and WVXV are constructed the same except for the following: Symbol and Description

DVR-530H-S /WYXV

1 4 5 6 11

Power Cable Remote Control Unit Battery Cover Dry Cell Battery (R6P, AA) Operating Instructions (English)

ADG7090 VXX2969 AZN7933 VEM1030 Not used

ADG7103 VXX2969 AZN7933 VEM1030 VRB1371

ADG7090 Not used Not used Not used Not used

ADG7103 Not used Not used Not used Not used

ADG7090 VXX2969 AZN7933 VEM1030 Not used

ADG7103 VXX2969 AZN7933 VEM1030 VRB1371

12 13 14 15 16

Operating Instructions (French) Operating Instructions (German) Operating Instructions (Italian) Operating Instructions (Dutch) Operating Instructions (Spanish)

VRC1251 VRC1252 VRC1253 VRC1254 VRC1255

Not used Not used Not used Not used Not used

VRC1251 VRC1252 VRC1253 VRC1254 VRC1255

Not used Not used Not used Not used Not used

17 18 19 20 21

Dual Layer IM (English) Dual Layer IM (French) Dual Layer IM (German) Dual Layer IM (Italian) Dual Layer IM (Spanish)

Not used VRC1280 VRC1281 VRC1282 VRC1283

VRB1392 Not used Not used Not used Not used

Not used VRC1280 VRC1281 VRC1282 VRC1283

VRB1392 Not used Not used Not used Not used

Not used VRC1280 VRC1281 VRC1282 VRC1283

VRB1392 Not used Not used Not used Not used

22 23 24 25 30

Dual Layer IM (Dutch) User Card User Card Polyethylene Bag (A4 x2) Packing Case

VRC1284 VRY1157 VRY1158 VHL1091 VHG2600

Not used VRY1157 Not used Not used VHG2630

VRC1284 Not used Not used Not used VHG2619

Not used Not used Not used Not used VHG2622

VRC1284 Not used Not used VHL1091 VHG2601

Not used Not used Not used Not used VHG2603

VRW2231

Not used

VRW2231

Mark No. >

NSP

NSP NSP NSP

32 WEEE Label

DVR-530H-S DVR-530H-AV DVR-530H-AV DVR-630H-S /WVXV /WYXV /WVXV /WYXV

DVR-630H-S /WVXV

DVR-530H-S 5

2.2 EXTERIOR SECTION 53

28 55

53 58

46 41 9

49 31

50 48

49 Lithium Battery (CR2032)

21 57 56 50

44 37

11 G

50 50 54

49 47

2 49

13 10

49 49

26 D

6 12

47 49

35 42

25 23 E

49 38

30 15

49 32 45 Refer to "2.3 FRONT PANEL SECTION".

DVR-530H-S 1

CONTACT SIDE

NON-CONTACT SIDE

(1) EXTERIOR SECTION PARTS LIST Description

Part No.

Mark No.

1 2 3 4 5

TUNB Assy (for service) JACB Assy FLJB Assy DVJB Assy ATAB Assy

VXX3025 VWV2115 VWG2536 VWG2523 VWV2123

NSP 31 32 NSP 33 NSP 34 NSP 35

HDD Stay DV Angle Writer Stay L Writer Stay R PCB Base

VNE2369 VNE2370 VNE2371 VNE2372 VNE2378

6 7 8 9 10

MAIN Assy (for service) SCRB Assy (for service) POWER SUPPLY Unit HDD DRIVE Assy R9R

VXX2997 VXX3021 VWR1392 See Contrast table (2) VXX2987

36 NSP 37 38 39 40

Fan Duct Binder (BK-1) Pioneer Name Plate Tray Sheet Tray Panel EB

VNK5693 ZCA-BK1 VAM1148 VEC2467 VNK5715

11 12 13 14 15

Flexible Cable (27P) Flexible Cable (16P) Flexible Cable (40P) Flexible Cable (40P) Flexible Cable (27P)

VDA2063 VDA2064 VDA2065 VDA2066 VDA2067

41 NSP 42 43 44 45

Bonnet Label P. Plate Holder Earth Plate TU #6-32 Screw Screw

See Contrast table (2) PNY-405 VBK1156 DBA1125 VBA1098

16 17 18 19 20

Housing Assy (4P) Housing Assy (4P) Ferrite Core DC Fan Motor Rubber Foot

VKP2357 VKP2358 VTH1050 VXM1120 VEB1349

46 47 48 49 50

Screw Screw Screw Screw Screw

VBA1104 AMZ30P060FTC BBZ30P040FTC BBZ30P060FTC BPZ30P080FTC

21 NSP 22 23 24 25

Rubber Spacer (CR) PC Support Gasket 10 x 7T Gasket 40 x 5T Gasket 10 x 25T

VEB1373 VEC1749 VEC2472 VEC2473 VEC2475

51 52 53 54 NSP 55

Screw Screw Screw Screw Tape

BPZ30P250FTC BSR30P060FTC BSZ30P060FTC PBZ30P080FTC ZTA-156A-19

26 27 28 29 NSP 30

Aluminum Tape 50 x 25 Aluminum Tape 135 x 25 Bonnet Case S Rear Panel Base Chassis

VEF1058 VEF1059 VXX3039 See Contrast table (2) VNB1052

NSP 56 NSP 57 58

Serial Label S ID Label Assy HDD Caution 8L B

VRW2188 VXW1006 VRR1062

Mark No.

Description

Part No.

(2) CONTRAST TABLE DVR-530H-S/WYXV, WVXV, DVR-530H-AV/WYXV, WVXV, DVR-630H-S/WYXV and WVXV are constructed the same except for the following: Mark No.

Symbol and Description

9 9 29 41

HDD 160G WD1600BBGUCS HDD 250G ST3250823 S Rear Panel Bonnet Label

DVR-530H-S /WYXV VXF1068 Not used VNA2772 VRW2172

DVR-530H-S DVR-530H-AV DVR-530H-AV DVR-630H-S /WVXV /WYXV /WVXV /WYXV VXF1068 Not used VNA2772 VRW2172

VXF1068 Not used VNA2773 VRW2181

Not used VXF1082 VNA2793 VRW2192

DVR-630H-S /WVXV

Not used VXF1082 VNA2793 VRW2192

DVR-530H-S 5

2.3 FRONT PANEL SECTION A

15 15 1 2

F B

6 (1/4) 3

11 DVR-630H-S only

15 7

6 (2/4)

6 (3/4) 6 (4/4) 12

14 DVR-630H-S only

5 D

4 9

DVR-530H-S 1

CONTACT SIDE

NON-CONTACT SIDE

(1) FRONT PANEL SECTION PARTS LIST Mark No.

Description

Part No.

1 2 3 4 5

PSWB Assy RSWB Assy Housing Assy (3P) Rubber Foot FL Lens E

VWG2526 VWG2530 VKP2359 VEB1349 VNK5706

6 7 8 9 10

Main Key Center Lens E Front Panel E Door E Center Panel EB2

See Contrast table (2) VNK5713 See Contrast table (2) See Contrast table (2) VNK5714

11 12 13 14 15

Key Top A Ring E PLAY Plate E REC Plate E Screw

See Contrast table (2) See Contrast table (2) See Contrast table (2) See Contrast table (2) BPZ30P080FTC

(2) CONTRAST TABLE DVR-530H-S/WYXV, WVXV, DVR-530H-AV/WYXV, WVXV, DVR-630H-S/WYXV and WVXV are constructed the same except for the following: Mark No. 6 6 8 9 11

Symbol and Description

DVR-530H-S /WYXV

DVR-530H-S DVR-530H-AV DVR-530H-AV DVR-630H-S /WVXV /WYXV /WVXV /WYXV

DVR-630H-S /WVXV

Main Key E1 Main Key E2 Front Panel E Door E Key Top A

VNK5707 Not used VNK5763 VNK5708 Not used

Not used VNK5704 VNK5816 VNK5834 VNK5717

12 Ring E 13 PLAY Plate E 14 REC Plate E

Not used Not used Not used

VNK5719 VNK5720 VNK5721

DVR-530H-S 5

3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM 3.1 BLOCK DIAGRAM 3.1.1 OVERALL BLOCK DIAGRAM A

: Playback system signal route

: Recording system signal route U301 VXF1060 TV FRONT-END

ANT

RF IN SIF OUT RF 7 OUT

VOUT 17

TUNB ASSY

Video Selector Video Driver IC401 LA73031V

UVV

UVV 2V

Multi Sound L SIF Decoder OUT 27 2 IN IC901 MSP3417G

SIF

LPF

UVL

(21P)

CN301

29 3Y

JA801

IC501 LA73026AV 28 (1/2)

B V/Y In

AV2

L In

(27P) 22

SCART 5

LIN1

VIN1 YIN1

SCRB CN702(1/2) (27P) ASSY (27P)

Audio Selector with Electirc ATT IC103 BD3823FV

CN104(1/2) (27P) MSL

LIN4

CN301(1/2) CN101(1/2)

C 1/2

(27P) LIN1

26 CIN2 26

6 8

FLJB ASSY

JA301

YIN2

24 LIN2 LIN3

VIDEO 22

VIN2

CN3802 (40P)

[ATA]

LIN2

HDD

INPUT2

JA104 VIDEO

C1001 R8A34011BG-K

B 1/2

VIN3

LIN3

DVD-VR DVD-Video

Sysytem Codec

[ATAPI]

JACB ASSY

YIN3 CIN3

Y C

Y/C

CCR CN105 Pin8

I 1/2

L In

V/Y In

AV1

6 2

CIN1

IC404

CN105(1/2)

(27P)

33Interface

JA802

CN701(1/2)

V/Y

CN404 (21P)

R/C In

1 44

R INPUT3

DVD-VR DVD-Video

CN9003 CN3801 (40P)

(40P)

IC202 SDRAM 16Mbit DSP

CN101

IC203 FLASH 16M

(45P) 5

SPDL MOTOR

Pickup

3 2 LD DRIVE

A B C D S4 S3 S2 S1

PICKUP ASSY

IC1301 DDR SDRAM 512Mbit

IC201 UPD63641GM

MAIN ASSY

32 36 35

Flash 64Mbit IC1102

31 38

PB DVD/CD

RF IC

40 39

IC101 UPC3340GC CN501 (12P)

6CH Driver

LOADING MOTOR

STEPPIONG MOTOR

CN502

DRIVE ASSY(R9R)

IC501 BD7997FS

DVR-530H-S 1

IR U-com IC3401 PDF015A Except DVR-433H model

â&#x20AC;¢ R ch is same as L ch.

DVJB ASSY TPBP

TPAN

TPAP

JA601

TPBN

DV TERMINAL

CN5601 1

(16P)

TPAP

TPBP

TPBN

(16P)

TPAN

CN601

B 36 37 38 39

CN402(1/2) (27P) 6

IC101 PMC002A8

SEL.V/Y

IC5101 UPD72852AGB-8EU IEEE1394 Physical IC

SEL.C/R

Tuner U-com

I 2/2 SCRB ASSY IC404 Pin4

Control Data

IC802 4

IC805 MM1637XVBE

G In B In

(27P)

CN2201(1/2)

R/C In

IC803

SEL.L

JA801 1

IC804 4

AV2

V/Y Out

L Out

IC702 7

IC3101 PCM1802DB1

JA802 R/C Out

10 Audio 11 A/D 1 12 48KHz 20Bit

G Out

IC703 LA73054

IC3301 CY244ZXC

IC4201 CM0045AF-K

L Out 7

IC501 LA73026AV 13 (2/2) 25

CVBS IN

18 SCART 26 Interface 2 30 11 42 16

16 18 20 22 24 14 9

CN2201 (2/2) (27P) G B Cr/R

DDR SDRAM 128Mbit IC1221

Cb/B Y/G Y C

Y(G)

10 12

18 20

Cr(R) OUT

Cb(B) OUT

Y(G) OUT Y OUT C OUT

25 23

L OUT

Y(G)

Cb VOUT

Y C

COUT

YOUT

VIDEO Y C

MSL

R JA501

Tuner U-com (27P) (27P)

IC301 PT6315

OPTICAL AC-3/PCM DIGITAL AUDIO OUT

B 2/2 JACB ASSY

CN101(2/2)

FL Driver

(27P)

V301

MSL : Music Server Lch FL

Key SW

CN301(2/2) (27P)

DVR-530H-S 5

LINE OUT 1

LOUT

CN401 IC3251-1/2 CN3001 UPC4570G2 SPDIF 6

JA504

33 V 6

IC501 LA73054

Y(G)

IC103 Pin4 IC401 Pin1

IC3201 PCM1742KE Audio 7 D/A Conv.

CN104 (2/2) (27P) JA502

(27P)

IC404 Pin4

CN402 (2/2)

CN702 (2/2) (27P)

TU_L

TU_V

4 14 19 25

(27P)

C 2/2 FLJB ASSY G RSWB ASSY F PSWB ASSY

COMPONENT VIDEO OUT

CN105 12 10 8 (2/2)

6 B

C Y

12 10 8

B G

IC1201 DDR SDRAM 128Mbit

CN701 (2/2) 16 18 20 (27P)

1-3

AV1

V/Y Out

CB IN

G IN

CCR IN

Video Decoder 23

B Out

PLL & VCXO

CN2201

CN3001

2 IC1201, IC1221 DDR SDRAM 128M x 2

CN3801 SERIAL

IC1301 DDR SDRAM 512M

CN1901

DVR-530H-S

CN5601

DV_IN

IC5101 Phy

IC3303

24M

IC3301 Play Mster clock and PLL

33/36M

CN1901

IC1102 FLASH

HOST BUS

36M 33M 27M

IC3201 DAC

H MAIN ASSY

To H.D.D

512M or 1G

IC1001 System Codec

18M

IC3101 A/D

To Writer

To JCKB

IC300

IC4201 Video Decoder

AUDIO LR IN

VIDEO Y.C.Yp.Cb.Cr OUT

VIDEO R.G.B IN

D IC320

To JCKB

E AUDIO LR OUT

1 4

3.1.2 MAIN ASSY

DVR-530H-S 5

3.2 OVERALL WIRING DIAGRAM A

AC IN

SCRB ASSY (VXX3021)

B VKN2012

B B 1/2, B 2/2

POWER SUPPLY UNIT (VWR1392)

JACB ASSY (VWV2115)

VKN2011

H H 1/5- H 5/5 MAIN ASSY (VXX2997)

HDD 160G (VXF1047) 530H HDD 250G (VXF1049) 630H

ATAB ASSY (VWV2123)

DRIVE ASSY R9R (VXX2987)

DVR-530H-S 1

(VXM1120)

INPUT 3

from Antenna INPUT

Control Input

Optical Digital Audio Output

Audio Left

Right

Video

S VIDEO

Audio Right

Video

Left

S VIDEO

VKB1193 -

VKB1192 -

A TUNB ASSY (VXX3025)

OUTPUT 1

DC FAN MOTOR

to TV OUTPUT

Antenna

D DVJB ASSY (VWG2523)

C FLJB ASSY (VWG2536)

F PSWB ASSY (VWG2526)

G RSWB ASSY (VWG2530)

S1 VIDEO

INPUT 2 (Front)

Audio

Right

Left

Video

DV INPUT

รท When ordering service parts, be sure to refer to "EXPLODED VIEWS and PARTS LIST" or "PCB PARTS LIST". รท The > mark found on some component parts indicates the importance of the safety factor of the part. Therefore, when replacing, be sure to use parts of identical designation. รท : The power supply is shown with the marked box. 19

DVR-530H-S 5

3.3 TUNB ASSY U301

VXF1060

BB(5V) NC NC NC NC AUDIOOUT SIFOUT GND SCL SDA AGCOUT MB(5V) NC TU(31V) GND AFT VIDEO

21 20 19 18

<U/V TUNER BLOCK> (VTL1096- -T ⇒CTF1399 change)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

L301

GND C310

22/6.3

CTF1399- -T

L302

E C

GND

VTL1081- -T

ASSY A TUNB (VXX3025)

L306

L305

2SA1576A(QR)-TLB Q301

E GND

Q302 2SA1576(QR)-TLB

R301

10K

R306

R305

2200p YB 1000/6.3 0.1YF

1000/6.3

C302 C314 C303

2200p

C313

C301

CTF1399- -T

V+6SW D901 1SR154-400-TRB

L901

L902 10µ

C907

56p

3p X901

1µ C908

56p

100

2.2k

GND

2SC4081(QR)-TLB Q906 R933

VSS1189- -T 18.43MHz

R905 0 R902 0 C915 3p

AVSUP AIN1+ AIN1TESTEN XIN XOUT TP DCO1 DCO0 ADSEL STBYQ

GND

AHVSUP NC SCOL SCOR VREF1 TP DACML DACMR VREF2 TP TP

100µ

33 32 31 30 29 28 27 26 25 24 23

C940 100/10 0.1 C919

L904 R909 C939 10/50

AGNDC AHVSS CAPLM

3.3/50

10/50 R910 *** C918 0.1 C938

44 43 42 41 40 39 38 37 36 35 34 1 2 3 4 5 6 7 8 9 10 11

39:NC 38:NC 37:NC

C909

100p

C901

0.01 YB R931 330

4.7k

R927

C906

GND B

R929

100/10 C905

41:SCIR 40:NC/ASG

0.1 C935

C917 C936

GND GND

R928

AVSS MONOIN VREFTOP

SIF

SIF BPF(4.5M–6.7M)

100/10

C904

L903 100µ

0.1 C937

MULTI SOUND DECODER

33(2125)

MSP3417G-TBB(WY)

IC901

GND GND

TP 12:SCL TP 13:SDA TP TP 22:RESETQ TP DVSUP DVSS TP

V+6SW

0.1

C934

100/10 C902

CTF1399- -T

1µ C929

12 13 14 15 16 17 18 19 20 21 22 R923 10k 0 470 470

F XRST1 STACHG

A 20

CH 22p

C930

GND

22p CH C931

R924 R925 R926

GND GND

DVR-530H-S 1

V+31V

V+6BB

R303 12(2125) V+6TU

R302 10(2125) R304 10(2125) R308 12(2125)

W150 1 2

1 KN301 VNE1948-

4 3

GND

R351

V+6SW

0 R352 0

CN301 XKP308121 20

SCL

SDA

18 17

AGC

16 15

UVOUT

14 13 12 11 10 9 8 7 6 5 4 3 1

V+6SW GND V+6TU GND V+31V GND XRST1 I_BG STATCHG

R354 0 R355

0 R356 0 R357 0 R358

B 2/2

0 R361

CN404

0(3216) R362 0(3216)

GND

R917

0.1

C922

100/10

0.1

C941

C916

V+6BB GND SCL SDA GND AGC GND UVOUT GND LOUT GND ROUT

C923

GND

560p CH

R920 1k

3.3k

ROUT

Q903 2SA1576A(QR)-TLB

3.3k

C925

GND GND C926 YB

3.3k C928

3900p

C927 GND

LOUT E

3.3k

0.01 R922

GND

Q904 2SA1576A(QR)-TLB

R921

CH 560p

R918

0.01 R919

3900p

C924

GND

A 21

DVR-530H-S 5

3.4 JACB(1/2) and FLJB ASSYS JA101 AKN1073-

C111 0.1

DAT_TO_M DAM_TO_T ASCK V+5V

220K

R156

C175

C110 0.1

R122 R125 100 100 R150 100 R124 100

680p CH C176 0.1

FANCTL

R151 100 XCHECKER CSYNC J_CLOCK STATCHG XP_SAVE FLPON P_CONT SWVION TUON I_BG MUTECTL R123 100K

GND GND

R105 100 XAVLTH R133 PSMUTE 100 XTHROU R160 S1 100

CN101

RGBSEL SQU LET

VKN1431- -TBB

C119 0.1 SWSTBY YVSEL SELV3 SELV2 SELV1 AMUTE1 COMPMUTE MUTEV

GND

6.8K

R166 R167 4.7K 4.7K

0.1

9 11 13

0.1 C169

0.1 2R

R176

R137 4.7k C120

C168 XRST2

R217 100

R138 1K R139 1K R140 1K

R146 100 R147 100 R148 100 R149 100

R171 330

C140 330p

SELIR 1-A3 X102 C117 VSS1197CH 15p R159 C118CH 560K 10p X101 CSS1666- -T

17 19

FUNC V+5V

(Y)

(C)

23 25 27

KEY1 2 LED_HDD KEY2 4 LED_DVD KEY3 6 IR FLSTB 8 FLCLK FLDATA 10 FLPON GND 12 SDET2 GND 14 V+5F GND 16 V+13E GND 18 2R GND 20 2L GND 22 2V GND 24 2Y GND 26 2C GND

GND GND

SDA SCL XRST1

GND KEY1 KEY2 KEY3 AGC

C125

0.1 FLDATA FLSTB FLCLK

GND

GND 1 S

6.8k

R135

C129 220/10

C178 0.1 ST101

GND

100/10

C173

SAMUTE C

B Q113 E Q104 UMD2N-TLB GND UMH1N-T C2 Q105 DTA124EUA-TLB B2 ***

1 2

B 2/2

AMUTE2_1 2-B5 Q103 DTA124EUA-TLB

GND

8 9

E2 E C

GND

AMUTE2 2-A1,2-B4

10/50

Q104 UMH1N-T

GND

CN701

BLANK 1-A2

SCART_TO_S 2-C2 XTHROU

SCALT_TO_S 2-C2

SCCT_TO_S 2-C2

SCYT_TO_S 2-C2

SCGT_TO_S 2-C2

SCBT_TO_S 2-C2

R106 0

SCRT_TO_S 2-C2

1V 1Y

SCL SDA

XAVLTH

SCRS_TO_T 2-B3

SCGT_TO_M 2-B1

BT_TO_M 2-C1

SAMUTE FUNC

4V 2-D1

25 26

23 24

21 22

19 20

17 18

13 14

11 12

9 10

7 8

5 6

3 4

GND

25 26

23 24

21 22

19 20

17 18

15 16

13 14

11 12

5 6

3 4

CN104 VKN1431- -TBB

DVR-530H-S 1

1 2

GND GND SC_RTtoS GND SC_BTtoS GND SC_GTtoS GND SC_YTtoS GND SC_CTtoS GND SC_ALTtoS GND SC_ARTtoS XTHROU GND 4V GND BLANK GND 4R GND 4L GND V+6E

C144

JA104

VKB1192-

VKN1431- -TBB

470p CH

SC_V/YStoT

CN105

V+13E GND V+5V GND AVLIN AVLOUT XP_SAVE GND SAMUTE FUNC GND SC_ALIN GND SC_ARIN GND SC_BStoT GND SC_GStoT GND SC_RStoT GND SC_CStoT GND XAVLTH GND SCL SDA

GND 18

V+6E

***

C183

470p CH

C141

15 17

SC_ARIN 1-C1

V+5V

SC_ALIN 1-C1

V+13E

AVLIN 1-A3 AVLOUT 1-C3 XP_SAVE

GND B MUTECTL

B 1/2

GND

14 L

C122 0.1

39k

100/16

R158 33 (2125) C150

C138 0.1

Q113 D111 UMD2N-TLB DAP202U-TLB

GND

470

SCL SDA

R173 R174

0.1

C170

10K

LOUT R193 2-B1 R192 100 100

5 2

INPUT3

D103 1SS355-TRB

10/50

C127

GND

Lithium Battery

V+5V

100/16

R207 100K

100 GND

GND

:ST101 VKX1019-(SOCKET) :BT101 VEM1034-(BATTERY)

C171

R204 100K

C160

AVLOUT 1-D2

GND

C154

GND

10/50

R198

ROUT 2-B1

C R134 B 10 E Q108 2SC4081(QR)-TLB

V+5V V+5M

GND

C153

10/50 GND

10/50

R199 R189 100K 100K

75F

0.01 YB

C142

100

SELECT ROUT LOUT VCC VRR FILTER GND SCL SDA GND

IC103 BD3823FV-TBB

C159

100

R197

R5 L5 TunerR TunerL R1 L1 R2 L2 R3 L3

20 19 18 17 16 15 14 13 12 11

C156

75F R196

75F

R195

GND R200

V+12VOL

GND

1 2 C151 3 (T) 10/50 4 C152 10/50 5 6 C157 7 8 10/50 C158 9 10 10/50

R188 100

GND

100K (3216) YB 4R 2-D1 4L 2-D1

100

Q115

DTC124EUA-TLB 10/10 R228 C179 YB 100K (3216) R229 C180 10/10

MSR 2-C5 GND MSL 2-C5

R202

SC_ARIN 1-D2 R208

10/50

GND

R191 100K

C149

GND

V+5V V+5F

D118 1SR154-400-TRB Battery(3V) D105 BT101 R175 1SS352-TRB 1K

D116

B 2/2

V+6E 1SS355-TRB D107 R230 0

C155 100/10

R190 100K

C148 10/50

R172 0

1SS355-TRB

C132 0.1

100

V+5V

GND R183

R201

SC_ALIN 1-D2

V+5M

R214 C130 0 1u YB

D108 1SS355-TRB

V+6E

2L 2R

SDET3

SDET1

(Y) (C)

GND

FLSTB FLCLK FLDATA FLPON

SDET1 SDET2 SDET3

3 2 1

IC102 BD4846G-TRB

100

R168 100 R169 100

HSM_TO_T

KEY1 LED_HDD KEY2 LED_DVD KEY3

SDET2

R216

C139 G 4 NC 3 0.1 IN NC 2 R113 OUT 5 1 10K

V+5F V+13E

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

V+5V

GND

33. AMUTE1 32. COMPMUTE 31. MUTEV

98. DAT_TO_M 99. DAM_TO_T 100.ASCK

R155 100

GND

B 2/2

100K

R231

100K

IC101 PMC002A8-K

R152 R153 100 R154 100 100 R114 100 R144 100 R145 100

V+5V

R165

GND

TXD1

C167

TXD1

RXD1

22/6.3

GND

R180 RESET

R141 100 R142 100 R143 100

XTHROU S1 blank RGBSEL SQU LET VDD4 GND SWSTBY YVSEL SELV3 SELV2 SELV1

50. blank 49. blank 48. XAVLTH 47. PSMUTE

81. CVBSIN 82. GND 83. FILTSLC 84. VDDVCO

47K

DBGP0

blank blank blank GND VDD3 DBGP2 DBGP1 DBGP0 blank blank blank blank blank

50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31

0.1

100K

100K R179

100K R178

R177

9 8

DBGP1

DBGP0

DBGP2

DBGP1

R222 100 R223 100 R224 100

DBGP2 DBGP1 DBGP0

DOWNLOAD

DBGP2

JA102 RKN1004-

RFTHRU

GND

V+5V

VKN1413- -TBB

R234

10u

0.1

2 3 1

80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100

C128 R131 2.2/50 1K

C109

22K C102 220p CH

R219 220 R221 220

AVLIN 1-D2

100

TEXTV 2-B2

V+5V

CN102

100K R225 100 R127 100 R128 100 R129 100

L101 0.1 C106

470/16

2.2K C105

R101

GND

R132 0

C116

GND

HST_TO_M

GND GND Q101 2SC4081(QR)-TLB R111 FANCTL B

1SS355-TRB

R126

VDDODA HST_TO_M RXD2 TXD2 RXD1 TXD1 LEDHDD LEDDVD BLANK blank AVLIN MRST XCHECKER SYNCAFT J_CLOCK STATCHG XP_SAVE FLON P_CONT SWVION TUON I_BG MUTECTL blank GND VDD2 FANCTL blank RFTHRU blank

GND

B 2/2

Control Input D114

SELIR 1-B2

FLDATA FLSTB FLCLK WDT ACDET HSM_TO_T IR RESET XT1 XT2 GND CF1 CF2 VDD1 MODEL1 MODEL2 KEY1 KEY2 KEY3 AGC BATTDET FUNC SDET3 SDET2 SDET1 AVLOUT SDA SCL XRST1 XRST2

4.7K

GND GND

R104

C D102

B2B-PH-K-S

1SR154-400-TRB R103 B 4.7K

C103 0.1 C104

100/16

toFAN

To FAN MOTOR

GND

R233

RXD1 TXD1 LED_HDD LED_DVD

C166

100p CH

GND

MRST 2-A1 V+5V

VTL1081- -T

Q102 2SB1238X(PQ)-T

LTA102J-T L102

B 2/2

V+5M

V+13SW

GND

CN103

GND

R110

GND

V+13SW

ASSY B 1/2 JACB (VWV2115)

0.1

R161 0.1

C163

100p CH

4.7K C165

R184

4.7K

150 GND

Q116 DTC114TUA-TLB

E GND GND Q107 2SA1576A(QR)-TLB C R109 L103

B E Q112 2SC4081(QR)-TLB

4.7K

R187

R185

B_IR 2-A1

C124

100/10

C164 100p CH R186

BLANK 1-D3

R107

V+5V

C126

G-LINK IN

10K

V+5V 2 4 3 1

I CN702

: Video Signal Route

(Y)

: Y Video Signal Route

(C)

: C Video Signal Route : AUDIO SIGNAL ROUTE (L ch)

C FLJB ASSY (VWG2536)

(T)

: AUDIO SIGNAL ROUTE (TUNER L ch)

FL Holder VNF1130V301 VAW108523 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41

48 49

S1 S2 S3 S4 S5 S6 S7 S8 S9

0.01 YB

9 10 11 12 13 14 15 16 17

C303

S10 S11 S12 S13 S14 S15 S16 COM12 COM11 COM10 COM9 COM8 COM7 COM6 COM5 COM4 COM3 COM2 COM1

0.01 YB

C301

GND1

R309 0.1

C304

V+5FL

3 5 6 7

S16 S15 S14 S13 S12 S11 S10

C333

220 220 220

VSS VDD GRID1 GRID2 GRID3 GRID4 GRID5 GRID6 GRID7 GRID8 GRID9

44 43 42 41 40 39 38 37 36 35 34

GND1

VEE LED4 OSC IC301 PT6315 SEG16 DOUT /UPD16315GB-3S SEG15 DIN FL DRIVER SEG14 CLK SEG13 KEY1 SEG11 SEG12 STB KEY2 SEG10

FL-28V

COM10 COM11 COM12

0.1 (50V)

0.1

R305 R306 R307

GRID10 GRID11 GRID12

23 24 25 26 27 28 29 30 31 32 33

R304 82k

GND1

LED1 LED2 LED3

C GND1

12 13 14 15 16 17 18 19 20 21 22

GND1

11 10 9 8 7 6 5 4 3 2 1

C326

CN1201

CN302

VKM1001-

C325

V+13E_2V+5FL

V+13E LED_DVD LED_HDD KEY1 KEY2 KEY3 GND V+5FL

COM1 COM2 COM3 COM4 COM5 COM6 COM7 COM8 COM9

GND1 0.1

C313

100/10 C312

22 LAU220J-TA

VSS VDD SEG1 SEG2 SEG3 SEG4 SEG5 SEG6 SEG7 SEG8 SEG9

L301

V+5FL

GND1 V+5F_2

8 S1 S2 S3 S4 S5 S6 S7 S8 S9

C308

CN301

GND1

FL-28V

2 3

FLDC+

4 5

FLDC-

GND1 GND2

7 8 9 10 11

V+5FL

13 14

V+13E_2

V+5F_2

C316

C317

IC302 AT140BT-16GP(GOODTAKE) RPM7140-H4(ROHM)

R337

0.1

17 18

1 Vout 2 GND 3 Vcc

23 24

(Y)

25 26

(C)

GND1

C319 100/10 TS

GND1

C318

GND1

0.1

20 22

15 16 0.1

KEY1 LED_HDD KEY2 LED_DVD KEY3 IR FLSTB FLCLK FLDATA FLPON GND SDET2 GND V+5F GND V+13E GND 2R GND 2L GND 2V GND 2Y GND 2C GND

0.1

VKN2014- (Nichiatsu) VKN1287- (FCI)

GND1 GND2

KN302 VNF1084- -T

JA301 VKB1190GND2

(Y)

3 4

(C)

L303 LAU220J-TA

GND1

5 2

9 8

R329 0

6 5

VIDEO 7

Lch /MONO

470p

GND2 C331

GND2 D310â&#x20AC;&#x201C;312 : DF3A5.6FU-TLB

R331

0.1

C322

1 2

GND2

GND1 UDZS2R4(B)-TRB D303

R327

GND2

D306 RF101L2S-TRB

UDZS13(B)-TRB GND2

GND1

470p

2SA1576A(QR)-TLB 2SC4081(QR)-TLB D302

1.2k

R318

Q308 B

1 2

3 D312 3 D310 3 D311

C332

C321

0.01 YB

10k

Q306

1.0k

R317

100/16 C335

3 4 5

1 2

R321 10k

10/50

C336

R316 220

RF101L2S-TRB D304

0.1 (50V) C324

R315

R314 270k

C320 0.022

YB (2125)

R320

27k

UDZS15(B)-TRB D301

Q307 2SC5712-TLB D305 1SS355-TRB B

R319

0.1 C323

100/16

C334

T302 VTT1166(162-1076-02)

INPUT2

3 2

Rch 1

JA302 VKB1189GND2

B 1/2 C 23

DVR-530H-S 5

3.5 JACB ASSY(2/2) CN401

R438 0

AMUTE2 1-D3,2-B4

(Y)

V/YTtoM 6 GND

H 2/5 CN2201

C B

100

0.1

0.1 C459

C457

0.1 C435 100/6.3

0.1 C422

100

100/10 R409 C436

C421

0.1 C434

100/10 C423

C407

10/50

B 33K

R441

Q411 UMF21N-TLB C

V+6E V+6TU

1u R416

GND

L404 *** R430

V+6BB

R402

17 20

V+5VI

9 SCGT_TO_M 1-D2 BT_TO_M 1-D2

GNDA 13

RFTHRU

GND

1 2 3

6 IN 1 5 GND 4 IN 2

SW OUT Vcc

TUON R446

C464 0.1 YB C465 YB 10/10 (3216)

12 R447

SCRS_TO_T 1-D2 R445

SCART_TO_S 1-D3

ARMtoT 14

UMF21N-TLB Q411 E2 GND

GND 11 CVBS_GR/BTtoM 12

IC404 MM1501XN-TRB

GND

RGBSEL

560 C2 UMF21N-TLB Q402

GND/GTtoM 10

0 (2125)x 4

12 R448

V+5TU

C474 1000/6.3 GND

SCALT_TO_S 1-D3

GNDA 15 ALMtoT 16 GNDA 17

(Cr)

12 15

SCRT_TO_S 1-D3

(Cr)

(Cb)

11 14

SCBT_TO_S 1-D3

(Cb)

(Yp)

10 13

SCGT_TO_S 1-D3

(Yp)

(Y)

SCYT_TO_S 1-D3

(Y)

(C)

SCCT_TO_S 1-D3

(C)

Cr/RMtoT 18 GND 19

V+31V

Q402 UMF21N-TLB

B 1/2

(C)

C/RTtoM 8 GND

R431

LOUT 1-C2

R442

C2 UMF23N-TLB Q413

TEXTV 1-A2

GND

ROUT 1-C2

ALTtoM 4 GND

B 1/2

C425

E R414

GND

C463

ARTtoM

Q409 C 2SC4081(QR)-TLB

V+6E

VKN2008-

1.5K C426

R415

GND

CN402

Q413 UMF23N-TLB

220

R412 C

C Q407 2SC4081(QR)-TLB E

V+5VI Q408 DTA143EUA E B

C405

C411

X525P 2-A4

GND

D403 1SS355-TRB L401 CTF1399- -T

10/50

I_BG

V+32E

GND

X525P

GND

V+13SW

C412

V+13SW

GND

V+32E

0.1 (50V)

GND 25

GND

GND GND

0.1

C410

GND E

V+32E

V+5VO

V+13E

GND 23

Q405 DTC124EUA-TLB C B

V+6E

100/10

GND 21 V+13E

SWVION

C403

V+6SW

XRST2

0.1

V+6E

GND V+6SW

680

AMUTE

GND

Q406 2SC2411K(QR)-TLB

100/6.3 C419

HSM_TO_T

R418

V+6SW

KN405 VNF1084- -T

V+5VI

100/10 C432

470

XRST2

C409

HSMtoT

R406 100

MRST 1-A3

MRST

B 1/2

0.1 C431

P_CONT DAM_TO_T

680

KN404 VNF1084- -T

Q404 2SC2411K(QR)-TLB

Q403 2SA1036K(QR)-TLB

0.1

SSMtoT

KN403 VNF1084- -T

DAT_TO_M

P_CONT

KN401 VNE1948-

4 3 V+12VOL

V+6E

0.1 C418

XRST1

750F

SSTtoM

2 1

JACB ASSY (VWV2115)

HST_TO_M

XRST1

R413

HSTtoM

B 2/2

ASCK

R410

0.1

GND

0.1

ASCK

C408

0.1

GND

C4580.1 R432

SPDIF

H 3/5 CN3001

BUP

D414 1SS355-TRB Q412 2SC4081(QR)-TLB

B_IR 1-A1

B_IR

V+13SW R439 0

220 R417

R408

GND

1K C417

RXDGL

47u C424 10P CH R411

3.3K L403

TXDGL

100/16 C460

VKN2008-

Cb/BMtoT 20 GND 21 Y/GMtoT 22 GND 23 YMtoT 24 GND 25 CMtoT 26 GND 27

(Y)

GNDA V+6BB

CN404

V+5VSEL

XKP3070-

CN301

SCL

SDA

GND

AGC

GND

R429

12 13

R420

AGC

(T) (T) 4L 1-C2

GND 11

V+6SW

V+5VI

D404-D412 DF3A5.6FU-TLBx9

V+5TU

(C)

RST1

XRST1

I_BG

STATCHG

21 75F

R436

GND

B 2/2

1 2 0.01 YB 75F

C415

GND 18

0.1 (50V)

V+31V C462 R435

0.1

C414

GND 16 V+31V

C442 0.1 YB C443 0.1 YB C444

3C YVSEL 1C

GND 14 V+6TU

C438 0.1 YB

(T)

B 1/2 V+6SW

1 2

1 2 0.1 YB

3 D4043 D4053 D406 SELV1 3Y SELV2 1Y (Y) SELV3 2Y 1 2

1 2

VIDEO SELECTOR IC401 LA73031V-TBB

C445 0.1 YB C446 0.1 YB C447 1 2 0.1 YB

C439

1 V4-IN V3-IN 44 2 V-DET-CTL V-DET OUT 43 3 NC V2-IN 42 4 COMP-H VCC 41 5 NC V1-IN 40 6 NC 39 V-DET-FIL 7 GAIN-CTL NC 38 8 C-IN1 GND 37 9 36 YOUT-SEL V.SYNCOUT 10 C-IN2 VCC 35 11 VCC C.SYNCOUT 34 C450 12 C-IN3 V-DET-IN 33 0.1 13 GND GND 32 14 NC C-OUT 31 C452 15 REG VCC 30 470/6.3 16 NC Y-OUT 29 17 INSEL1 LPF-CTL 28 18 Y-IN1 GND 27 19 INSEL2 NC 26 20 Y-IN2 TEST MODE 25 21 INSEL3 NC 24 22 Y-IN3 STBY_H23

3 D4073 D4083 D409 GND

B 1/2

R437 75F

GND

4V 1-D3

V+6BB

GND

0.1 YB C440 C455 0.1 YB 0.1 C441 0.1 YB1 2 YB

1 2

1V 3V 1 2

GND 3 D4103 D4113 D412

C456 0.1 C453 0.1

GND

SWSTBY

GND

DVR-530H-S 1

AMUTE1

: Video Signal Route V+6SW

R501

JA501

VKS1001-

: C Video Signal Route : Cr Video Signal Route

Q503 UMD2N-TLB E2

X525P 2-B1

R511 100

100/10 C504 C505

E GND

(C)

(Y)

(Yp)

C507 0.1 YB C508 0.1 YB C509 0.1 YB

(Cb)

(Cb) (Cr)

IC501 LA73054-TBB 75W DRIVER with LPF

C515

C511 0.1 YB C512

(Cr)

0.1

1 2 3 4 R507 5 6 0 7 8 9 10 11 R508 12 0 13 14 15 16 17 C516 18 100/10 0.1 0.1

VCC CVBS IN SQUEEZE LETTER MUTE1 C IN GND Y1 IN YCMIX Y2/G SW Y2(G)IN MUTE2 LPF SW Cb(B)IN GAIN SW2 Cr(R)IN GND REG

36 GAIN SW1 35 1/2DRIVE1 34 VCC 33 CVBS OUT 32 GND 31 C OUT 30 ASPECT 29 GND 28 Y OUT1 27 GND 26 GND 25 Y OUT2 24 VCC 23 Cb OUT 22 GND 21 Cr OUT 20 GND 19 1/2DRIVE2

C506 C517

0.1

C518 1000/6.3

(Y)

C510 0.1

1000/6.3

C519

(Cb)

1000/6.3 C520

(Cr)

470/6.3 C521

JA502 R521

R520

7 5

75F

(Cb)

470/6.3

Cb/Pb

R522

75F

Cr/Pr

75F

(Cr) 0.1

C514

VKB1222-

(Y)

C513 0.1

C502

C503

C2 Q503 UMD2N-TLB C B

R513

: AUDIO SIGNAL ROUTE (TUNER L ch)

GND

V+5VO

820

GND

2 GND

GND

Q510 UMD2N-TLB C B

E B

10K

R562

220/6.3

Q511 DTA124EUA-TLB

C549 VCH1241- -T (47/16)

GND

R557 470

R559 3.9K

Q514 HN1C03FU(AB)-T

B E

GND

GNDA

R560 470 R561 3.9K

Q514 HN1C03FU(AB)-T

B2 E2

R529 75F

GNDA C523 0.1

R530 75F

R532 75F

C550 VCH1241- -T

R563 470

(47/16)

R564 3.9K

C B

R533 100

Q515 HN1C03FU(AB)-T E GNDA

R566

GNDA

470 R567 3.9K

R534 100

C2 B2

Q515 HN1C03FU(AB)-T E2

JA504

GNDA R537 470 R538 470

MSR 1-C2 MSL 1-C2

VKB1193-

R535

(Y)

0 R536

B 1/2

0 GND

5 GNDA

(C)

V1 14 L1

C525 470p CH

GND

17 R1

18 C527 470p

C547

100/16 C548

GND

1-D3,2-A1

R565

GND

1-D3

AMUTE2

22K

D507

1SS355-TRB

R556

Q510 UMD2N-TLB

R558

D509

1SS355-TRB 1k

AMUTE2_1

D506 1SS355-TRB

2.2k

R540

V+5V

R570

V+13E

22K

(T)

: AUDIO SIGNAL ROUTE (L ch)

UDZS5R1(B)-TRB R505

R504

R506

: Yp Video Signal Route

B 1/2

COMPONENT

V+5VO

: Cb Video Signal Route

(Yp)

LET SQU COMPMUTE MUTEV

(Cb)

100/10

3 2 1 1 D508 2

OUTPUT1

(Cr)

OPTICAL

SPDIF

: Y Video Signal Route

(C)

Optical Audio Output

: Video Signal Route (TUNER)

(Y)

0.1

(T)

GNDA

20 C B2 E2 6 5 4

1 2 3 E B C2

B 2/2 25

DVR-530H-S 5

3.6 DVJB ASSY A

D DVJB ASSY (VWG2523)

H 5/5 CN5601

CN601 VKN2013- -TFB

GND USB_DM2 GND USB_DP2 GND GND USB+5V USB+5V GND GND TPAP GND TPAN GND TPBP TPBN

16 15 14 13 12 11

JA601 VKN1800- -TLB

10 9 8

1 2 3 4

7 6 5 4 3

6 8 TPAP TPAN TPBP TPBN 5 7

DV Input

2 1

GND4

DVR-530H-S 1

3.7 ATAB ASSY A

ATAB ASSY (VWV2123)(for HDD)

( HDD model only ) CN12

CN11

2 3

14 16

30 31

GND3

RESET# GND DD7 DD8 DD6 DD9 DD5 DD10 DD4 DD11 DD3 DD12 DD2 DD13 DD1 DD14 DD0 DD15 GND (KEYPIN) DMARQ GND DIOW# GND DIOR# GND IORDY CSEL DMACK# GND INTRQ RESERVED DA1 PDIAG# DA0 DA2 CS0# CS1# DASP# GND

H 3/5 CN3802

1 2

To HDD CN404

VKN1816-

VKN2009- -TBB

GND3

E 27

DVR-530H-S 5

3.8 PSWB and RSWB ASSYS A

F C

PSWB ASSY (VWG2526)

TP118

TP117

CN1101 S3B-PH-K-S R1210

KEY1_1

GND

KEY2

5.6k

S1201

ONE TOUCH COPY 0V

PLAY 2.85V

REC STOP 0.90V

2.2k 2.2k

S1203

REC 1.53V

VSG1024- -T R1204

VSG1024- -T

POWER 3.58V

R1203

S1213

S1204

CH+ 2.18V

VSG1024- -T R1205

GND2

S1205

12k

R1206

Switches

CH2.85V

VSG1024- -T

GND2

S1202

VSG1024- -T

3.3k

12k

VSG1024- -T R1213

R1202

S1212

5.6k

R1212

VSG1024- -T

S1201 : ONE TOUCH COPY S1202 : REC STOP S1203 : REC S1204 : CH+ S1205 : CHS1206 : STOP S1212 : PLAY S1213 : POWER

S1206

STOP 3.58V

VSG1024- -T

GND2

F 28

DVR-530H-S 1

G RSWB ASSY (VWG2530)

Switches S1208 : HDD/DVD S1209 : OPEN/CLOSE V+13E TP124

V+5FL TP125

TP115

2 S1208

KEY1

HDD/DVD 0V

4 V+5FL

VSG1024- -T

TP132

R1209

6 7

2.2k

KEY2 KEY3 GND

S1209

OPEN/CLOSE 0.90V

8 VSG1024- -T 10k

R1228

V+5FL

TP119

TP137

56k

R1229

GND1

C GND1

CN1202

TP138

S3B-PH-K-S

TP133

GND1

R1201

10k

C1205

0.1 YF

GND1

TP139

GND1

V+5FL

R1217

KEY2

GND

R1215

KEY1_1

TP126

GND1

V+13E

V+5FL

TP130

TP113 B

C LED (HDD) E

R1227

C1202

0.1 YF

R1222

180

TP120

Q1203 DTC124EUA-TLB

TP121

2 D1203

AMBER

0 0.1 YF

SLR-343DC(NPQ)-TS

R1225 C1201

1.8k

R1223

TP123

2 D1207

BLUE

SLR-343BBT(FGHJ)

TP122

TP111 TP110

TP112

CN302

0.1

V+13E LED_DVD LED_HDD

C1206

TP135 TP134 TP136

VKP2355-

TP131

10K

TP114

CN1201

R1208

V+5FL

1 C LED (DVD) E

Q1202 DTC124EUA-TLB GND1

GND1

G 29

DVR-530H-S 5

(VD)

TX2 RX2 RTS0 CTS0 RTS2 HCS0 HCS1 HCS4 HCS5 INT5 TX1 INT7 ACMOD0 ACMOD1 1

(A13) (C13)

(F15)

(F14)

GNDD

(E14)

(F13)

(A14)

10K(S)

R1039

H 3/5,4/5

(A15) (B15) (A16) (B16) (C16) (D16) (E16) (F16) (A17) (B17) (C17) (D17) (E17) (A18) (B18) (C18) (D18) (E18) (F18) (A19) (B19) (C19) (E19) (F19) (A20) (B20) (C20) (D20) (E20) (F20) (A21) (C21) (D21) (E21) (A22) (B22) (C22) (D22) (E22) (A23) (B23) (C23) (A24) (B24) (C24) (A25) (B25) (A26)

R1036 1K(S)

R1038 10K(S)

R1034 R1033 22(S) 1K(S)

AT1CS1 AT1ADR2 AT1ADR1 AT1DIOR AT1DMACK AT1CS0 AT1ADR0 AT1DATA0 AT1DATA1 AT1DATA2 AT1DATA3 AT1DIOW AT1RESET AT1DATA4 AT1DATA6 AT1DATA8 AT1DATA5 AT1DATA7 AT1DATA9 AT1DATA10 AT1DATA11 AT1DATA12 AT1DATA15 AT1DATA13 AT1DATA14 AT1INTRQ AT1DMARQ AT1IORDY

(B1) (A1) (C2) (B2) (A2) (C3) (B3) (A3) (D4) (C4) (B4) (A4) (E5) (D5) (C5) (B5) (A5) (F6) (E6) (C6) (B6) (A6) (F7) (E7) (D7) (F8) (E8) (D8)

(C7) (A7) (C8) (B8) (A8) (F9) (E9) (D9) (C9) (B9) (A9) (F10) (E10) (C10) (B10) (A10) (F11) (E11) (D11) (C11) (B11) (A11) (E12) (D12) (C12) (B12) (A12) (B13)

AT2INTRQ AT2DMARQ AT2IORDY AT2DATA14 AT2DATA9 AT2DATA11 AT2DATA7 AT2DATA8 AT2DATA13 AT2DATA5 AT2DATA1 AT2RESET AT2DATA15 AT2DATA3 AT2DIOW AT2ADR1 AT2ADR2 AT2DATA12 AT2DATA2 AT2ADR0 AT2CS1 AT2CS0 AT2DATA10 AT2DATA6 AT2DATA4 AT2DATA0 AT2DMACK AT2DIOR

V+3D

VDPIDO22 VDPIDO24 VDPIDO26 VDPIDO28 VDPIDO10 VDPIDO21 VDPIDO23 VDPIDO25 VDPIDO12 VDPIDO27 VDPIDO29 VDPIDO11 VDPIDO13 VDPIDO14 VDPIDO16 VDPIDO18 VDPIDO15 VDPIDO17 VDPIDO19 VDVSYNCI VDPIDI0 VDPIDI2 VDPIDI4 VDPIDI1 VDPIDI3 VDPIDI5 VDPIDI8 VDHSYNCI LRCKO VDPIDI6 VDPIDI7 VDPIDI9 ADATAO SRCBCLKI SRCLRCKI ACMOD0 SRCBCLKO BCKI ACMOD1 LRCKI SRCDATAO ADATAI SRCDATAI BCKO SRCLRCLKO SPDIFO SPDIFI

H 3/5 H 4/5

to ATAPI(DVD-RW/R_DRIVE&HDD)

R1037 22(S)

(AT)

4-C2 SDA SDCL 4-C2 DVAMCLKI AMCLK1 AMCLK23-C3 VMCLK3-D2 DVVCLKI VDPIDO20 3-C2,4-A1

3.9 MAIN ASSY(1/5)

H25

H26

J25

J26

K25

K26

L25

L26

D24

C22

D23

E24 F24

F22

G23

F21

G22

B18

C19

D20

E21

A18

B19

C20

D21

E22

F23

G24

C21

D22

E23

A19

B20

C18

D19 E19

E20

F19

F20

D18 E18 F18

DTL1106- -T

C1012

C1010 0.1(S)

C1001 1 A16

A17

B16

B17

C16

C17

D16

D17

E16

E17

F16

F17

A15

A14

B15

A13

B14

C15

C14

D15 F15

F14

F13

F12

F11

F10

G21

H22

N25 P25 R25

R26

T25

T26

U25

U26

V25

V26

M24

M23

N24

L16

M21

N22

P23

C1029 0.1(S) C1028 0.1(S)

L21

M22

N23

P24

K21

L22

N21

P22

P21

L15 M15

M16

N15

N16

P15

P16

R15

R16

T15

T16

L14

L13

M14

L12

M13

N14

N13

P14

M11

N12 P12

P13

R23

R22

R21

0.1(S)

R24

R12

R13

T12

T13

L11

M12

N11 P11

L5 M5

M6 N6

R14

R11

P26

K22

L23

C1024

1 C1018

T24

T23

T22

T21

T14

T11

4 3 6

AD25

AD26

AE25

AE26

AF25

AF26

W21

Y22

0.1(S)

AC25

AC26

W22

Y23

C1023

AB25

AB26

W23

Y24

1000p(S)

AA25

AA26

W24

Y21

C1022

Y25

R1031 22(S) R1032 22(S) USBINT1 (T21) DVCSEL (U26) SRCMODE0 (U25) TUSCLK (U24) XVQERST (U23) SRCMODE1 (U22) TUACK (U21) ADC_RST (V26) EDINT (V25) LANINT (V24) TUREQ (V23) DVCINT (V22) XGRRST (V21) DVINT (W26) SRCRST (W25) XBRST (W24) AUDIO_MUTE (W23) X525P (W22) 232TX (W21) RFF (Y26) XYCbCr (Y25) DDRCKE (Y23) (XCHK) BuCOMTX (Y22) USB&LAN_XRST (AA26)

C1040

AB24 AC24 AD24 AE24

AB23 AC23 AD23 AE23

AA22 AB22 AC22 AD22 AE22

AA21 AB21 AC21 AD21 AE21

AA20

AA19

AB20

AA18

AB19

AC20

AB18

AC19

AD20

AD10

AE11

AD9

AE10

AC7

AC8 AD8

AE9

AB1

AC2

AD3

AE4

AA1

AB2

AC3

AD4

AE5

AA2

AB3

AC4

AD5

AE6

AA3

AB4

AC5

AD6

AE7

AA4

AB5

AC6

AD7

AE8

AA5

AB6

AB7

AB8

AC9

AA6

AA7

AA8

AB9

AC10

AD11

AE12

AA9

AB10

AC11

AD12

AE13

AA10

AB11

AC12

AD13

AE14

AA11

AB12

AC13

AD14

AE15

AA12

AB13

AC14

AD15

AE16

AA13

AB14

AC15

AD16

AE17

AA14

AB15

AC16

AD17

AE18

AA15

AB16

AC17

AD18

AE19

AA16

AB17

AC18

AD19

AE20

AA17

AC1

AD2

AE3

AD1

AE2

(W6)

AA23

(Y2)

(Y3)

C1057 0.1(S)

AA24

R1462 75(S) R1470 56(S) R1463 75(S) R1459 56(S) R1464 82(S) R1465 82(S) R1466 82(S) R1467 82(S) R1468 82(S) 2

AE1

R1455

C1056 0.1(S)

RAB4CQ820J-T 82*4 RAB4CQ820J-T 82*4 82*4 RAB4CQ820J-T 82*4 RAB4CQ820J-T

W25

Y26

0.01(S)

R1454

W26

R8A34011BG-K

C1021

(U3) (U5) (V1) (V2) (V4) (V5) (V6) (W1) (W3) (W4)

V21

5 77

(U2)

GNDD V22

(U1)

IC1001 System Codec

C1020 1000p(S)

V23

C1019 0.1(S)

V24

C1055

C1053

0.1(S)

3 (R6) (R5) (T1)

0.1(S)

U21

R1453

U22

7 1

8 2

(T3)

U23

5 (P3) (T4)

U24

(P4)

1000p(S)

3 AF22

AF21

AF20

AF19

AF18

AF17

AF16

AF15

AF14

AF13

AF12

AF11

AF10

AF9

AF8

AF7

AF6

AF5

AF4

AF3

AF2

AF1

77 77

L1007

(AC1)

C1059 10

(AB3) (AC3)

C1035 0.01(S)

4 120(S) 120(S)

(AF1) (AF2)

(AD2)

R1460 R1461

VREF

V+2R5D

(AD1)

C1062 220/4

(AC2)

TUTX

(AF26) (AE25)

(Cb)

(AF24)

(C)

(AE23)

(Y)

(AF22)

ROUT 2-B4 GOUT 2-B4 BOUT 2-B4 COUT 2-A4 YOUT 2-A4

Video DAC Power (AC21)

CBU2 CBU1

R1410

(AD21)

(AE21)

(AE20)

(AF20)

(AA19)

(AC19)

(AD19)

(AB18)

(AE19)

(AA18)

(AD18)

(AE18)

(AA17)

(AB17)

(AC17)

(AA16)

(AF18)

(AD17)

GNDD

REC656I6 REC656I0 REC656I5 REC656I7 REC656I3 REC656I1 REC656I2 REC656I4

56*4 RAB4CQ560J-T

PHYCTL0 LPS PHYLREC PHY_DATA1 PHY_DATA0 PHY_DATA6 PHY_DATA7 PHY_DATA2 PHY_DATA5 PHY_DATA3 PHY_DATA4

(AE17)

(AF17)

(AB16)

PHYCTL1 PHYSCLK

DVREQ

(AC16)

(AF16)

(AE16)

(AD16)

(AF15)

DDATA28 DDATA29 DDATA30 DDATA31

(AE15)

(AC15)

(AB15)

(AA15)

(AF14)

(AD14)

(AC14)

(AB14)

DDQS2 DDM2 DDM3 DDQS3 DDATA24 DDATA25 DDATA26 DDATA27

(AC6)

(AB7)

3 4

5 6

7 8

(AB6)

(AC7)

(AA6)

120 R1504 120

V+3D

R1064 10K(S)

3 4

5 6

DVR-530H-S 1

V+3V C1513 0.1(S) C1514 0.1(S) R1502

R1503 3.9KF

7 8

3 4

5 6

7 8

H 1/5 30

H 2/5

R1411

R1427 R1423 R1424 R1428

56(S) 91(S) 91(S) 56(S)

R1409

(AA14)

(AF13)

(AE13)

(AD13)

(AC13)

5 6

R1403

R1408 (AA13)

(AF12)

(AE12)

(AD12)

3 4

56(S) 56(S)

R1407 (AB12)

(AA12)

(AF11)

(AE11)

(AC11)

(AB11)

(AA11)

(AF10)

(AD10)

(AC5)

R1425 56(S) R1421 91(S) R1422 91(S) R1426 56(S) R1406 (AC10)

(AB10)

(AF9)

7 8 2

(AE9)

(AA10)

5 6

56(S) R1402 (AE5)

R1405 3 4

(AD9)

(AC9)

(AA9)

5 6

(AF8)

3 4

(AE7) (AF7) (AD8) (AE8)

R1415 56(S) R1417 56(S) R1418 56(S) R1419 56(S) R1404

7 8 2

(AB8)

5 6

R1416 R1420

3 4

R1414

(AA8)

7 8 2

(AF6) (AD6)

5 6

(AD5)

3 4

(AF5)

(AD4)

7 8 2

DCLKO DCLKNO DADRS3 DADRS2 DADRS1 DADRS0 DBA1 DADRS10 DADRS4 DADRS5 DADRS6 DBA0 DCS DADRS7 DADRS8 DADRS9 DADRS11 DADRS12 DRAS DCAS DWE DDATA0 DDATA1 DDATA2 DDATA3 DDATA4 DDATA5 DDATA6 DDATA7 DDQS0 DDM0 DDM1 DDQS1 DDATA8 DDATA9 DDATA10 DDATA11 DDATA12 DDATA13 DDATA14 DDATA15 DDATA16 DDATA17 DDATA18 DDATA19 DDATA20 DDATA21 DDATA22 DDATA23

RAB4CQ560J-T 56*4

5 6

56*4 RAB4CQ560J-T 56*4 RAB4CQ560J-T 56*4 RAB4CQ560J-T

3 4

R1412 R1413

(AD3)

(AF4)

R1401

(AE4)

56*4 RAB4CQ560J-T RAB4CQ560J-T 56*4

RAB4CQ560J-T 56*4

56*4 RAB4CQ560J-T

R1501

YB YB

3.9KF

REXT2 (AC20)

(AE3)

REXT1 (AB21)

56(S) 56(S)

(AC22)

56*4 RAB4CQ560J-T RAB4CQ560J-T 56*4

HDACK0 HDACK1 NSDATX0 HDOE HCS0 HCS1 HCS3 HCS2 HWS1 HCS4 HCS5 HWS0 NSDARX0 NSDARX1 HWAIT NSDATX1 NSCS0 NSCS1 NSCLK0 NSCLK1 INT1 SPICS SPIDATAI SCLK0 SCLK1 SPIDATAO CTS0 SPICLK INT0 INT2 INT3 INT4 RTS2 INT5 INT6 INT7 INT8 CTS1 TX2 CTS2 CTS3 RTS0 TX1 RTS1 RTS3 RX0 TX3 RX1 RX2 RX3 TESTMOD1 TX0 TESTMOD2 TESTMOD0 TESTMOD3 TESTMOD4 TESTMOD5

Analog Video OUT

(Cr) (Yp)

GNDD

(AA25) (AA24) (AA23) (AB26) (AB25) (AB24) (AB23) (AC26) (AC25) (AC24) (AC23) (AD26) (AD24)

TURX UARTTX BuCOMRX 232RX UARTRX DTL1106- -T

5 R1458

C1036 10

(Y5)

Video DAC Power V+3V

C1034 0.01(S)

1 (AA4)

GNDD

C1052 0.01(S)

(AA5)

C1005 0.1(S)

C1064 0.1(S)

4 (AB4)

C1051 1000p(S)

(AB1)

6 (AA2)

C1006

(AA1)

C1063 0.1(S)

C1008 0.1(S)

C1050 0.1(S)

(Y1)

R1457

AF23

R1456

AF24

C1058 0.1(S)

ARDRS12 ARDRS11 ARDRS9 ARDRS8 ARDRS3 ARDRS2 ARDRS1 ARDRS0 ARDRS7 ARDRS6 ARDRS5 ARDRS4 ARCLKNO ARCLKO

HADRS2 HADRS5 HADRS6 HADRS7 HDREQ1 HADRS1 HADRS8 HADRS9 HADRS11 HADRS12 HADRS10 HADRS14 HADRS16 HADRS17 HADRS18 HADRS13 HADRS19 HADRS20 HADRS22 HADRS23 HDATA0 HADRS15 HADRS21 HDATA1 HDATA2 HDATA3 HDATA5 HDATA4 HDATA6 HDATA7 HDATA8 HDATA9 HDATA10 HDATA11 HDATA12 HDATA14 HDATA13 HDATA15

(M25) (M26) (N23) (N24) (N25) (N26) (P26) (P24) (P22) (R26) (R25) (R24) (R23) (R22) (R21) (T26) (T25) (T24)

N26

K23

L24

J21

M25

K24

J22

M26

J23

C1025 1000p(S)

J24

H21

C1033 0.1(S) C1030 0.1(S)

H23

E10

D10

E11

C10

D11

E12

B10

C11

D12

E13

A10

B11

C12

D13

E14

A11

B12

C13

D14

E15

A12

B13

0.1(S) C1032

H24

C1009 0.1(S)

1000p(S)

C1013 G25

G26

C23

A20

B21

C1007 1

1000p(S)

F25

F26

C24

A21

B22

C1003

E25

E26

A22

B23

1 C1031

D25

D26

A23

B24

VCORE

C25

C26

A24

C1026 0.1(S)

R1452 (P5)

B25

C1004 10 C1017 0.01(S)

(R2) (R4)

A25

(R1)

C1027 1

C1015 0.1(S) C1016 0.1(S)

B26

C1011

A26

R1469 56(S) R1451

(T6)

(P2)

220/4

C1002

L1004

(L2) (L1) (M5) (M4) (M3) (M2) (M1) (N6) (N5) (N4) (N3) (N2) (N1)

56*4 RAB4CQ560J-T 56*4 RAB4CQ560J-T 56*4 RAB4CQ560J-T 56*4 RAB4CQ560J-T

V+3D

HDREQ0 HADRS3 HADRS0 HADRS4

(D25) (D26) (E24) (E26) (F22) (F23) (F24) (F25) (F26) (G21) (G22) (G23) (G24) (G25) (G26) (H22) (H23) (H24) (H25) (H26) (J21) (J22) (J23) (J24) (J25) (J26) (K21) (K22) (K24) (K25) (K26) (L21) (L22) (L23) (L24) (L25) (L26) (M21) (M22) (M23) (M24) (N21) (N22)

L1005 DTL1106- -T

(G5) (H3) (H1) (J6) (J5) (J4) (J3) (J2) (J1) (K5) (K4) (K3) (K2) (K1) (L6) (L5) (L3) (M6)

(P1)

(C26)

22(S) 22(S) 22(S) 22(S)

V+1R2

(G2)

TSDATB7 TSDATB6 TSDATB5 TSDATB4 TSDATB3 TSDATB2 TSDATB1 TSDATBRDY TSDATBERR TSDATBSYN TSDATBDEN TSDATB0 TSDATBACK ARDQS0 ARDATA15 ARDATA14 ARDATA13 ARDATA12 ARDATA3 ARDATA2 ARDATA1 ARDATA0 ARDATA7 ARDATA6 ARDATA5 ARDATA4 ARDATA11 ARDATA10 ARDATA9 ARDATA8 ARDM0 ARDQS1 ARDM1 ARDRS13 ARWE ARCAS ARRAS ARCS0 ARCS1 ARDRS10 ARBA1 ARBA0

(C25)

(E23)

R1035 22(S)

DBI TDI TMS TCK TRST TDO DVDAREQ DVDAACK DVDADT0 DVDADT1 DVDADT2 DVDADT3 DVDADT4 DVDADT5 DVDADT6 DVDADT7 DVDAADR0 DVDAADR1

R1011 R1012 R1013 R1014

(B26)

L1008 DTL1106- -T

V+3D

GNDD

(F4) (F3) (F2) (F1) (G4) (G3) (G1) (H5)

DVVCLKO

R1040 10K(S) (D3) (D1) (E4) (E3) (E2) (E1) (F5) (H6)

XRESET CSYNC PLLRST PLLON TRACE DVBCK DVLRCK DVADATA

SPICS TRACE

(C1)

REC656O6 REC656O7 REC656O4 REC656O2 REC656O1 REC656O0 REC656O5 REC656O3

H 4/5 R656CLKI 4-B4

ATAPI BUS CPU CONTROL P_DATA I/O JTAG DV I/O

(AT)

H 1/5 MAIN ASSY (VXX2997)

CPU DATA CPU ADDRESS ADC/DAC

V+3D

SRCBCLKO SRCDATAO SRCLRCLKO DVADATA DVLRCK DVBCK

1 1 1

7 8 7

0(S)

TSDATB0 TSDATB1 TSDATB2 TSDATB3

YB 2

0.01

C1225

R1253

DDATA20 DDATA21 DDATA22 DDATA23

33*4 RAB4CQ330J-T R1255 R1258

DDQS2

33(S)

100k(S)

C1226 1000p C1227 1

DDM2 DWE DCAS DRAS DCS DBA0 DBA1 DADRS10 DADRS0 DADRS1 DADRS2 DADRS3 DVREQ

C1228 1000p

128Mbit DDR SDRAM (8M*16bit)

C1901

1 4 3 6 5 8

V+5D

GNDD

XRESET

R1056 10K(S) R1094 10K(S) R1095 10K(S)

C1224

C1229 1000p

R1254 33*4 RAB4CQ330J-T

C1214

R1256 33(S) R1259 100k(S)

DDQS3

C1234

DDM3 DCLKNO DCLKO DCLKEN

R1257 10k(S)

IC1301 K4H511638B-UCB3

3 R1326 33*4 RAB4CQ330J-T

C1307 1000p

R1322 33(S)

ARDQS0 ARDRS13 R1329 100k(S)

C1309 1

ARDM0 ARWE ARCAS ARRAS ARCS0 ARCS1 ARBA0 ARBA1 ARDRS10 ARDRS0 ARDRS1 ARDRS2 ARDRS3 C1313

DADRS12 DADRS11 DADRS9 DADRS8 DADRS7 DADRS6 DADRS5 DADRS4

1000p

R1327

8 1 4

C1311 1000p

C1314

ARDATA15 ARDATA14 ARDATA13 ARDATA12

7 33*4 RAB4CQ330J-T R1328 2

0.01

C1308

ARDATA11 ARDATA10 ARDATA9 ARDATA8

33*4 RAB4CQ330J-T

R1323 0.1 C1320 0.1

R1330 100k(S) 33(S)

ARDQS1 C1321

0.1

ARDM1 ARCLKNO ARCLKO ARCLKEN

R1324 10k(S)

ARDRS12 ARDRS11 ARDRS9 ARDRS8 ARDRS7 ARDRS6 ARDRS5 ARDRS4 C1312

512Mbit DDR SDRAM (32M*16bit)

C1328 0.1

0.1

C1330 0.1

C1329 0.1 C1331 0.1

GNDD

(Y)

C1230

VREF C1306

66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34

1 7 5

0.01

ARDATA4 ARDATA5 ARDATA6 ARDATA7

C1305

VSS DQ15 VSSQ DQ14 DQ13 VDDQ DQ12 DQ11 VSSQ DQ10 DQ9 VDDQ DQ8 NC VSSQ UDQS NC VREF VSS UDM ~CK CK CKE NC A12 A11 A9 A8 A7 A6 A5 A4 VSS

6 4 2 RAB4CQ330J-T

VDD DQ0 VDDQ DQ1 DQ2 VSSQ DQ3 DQ4 VDDQ DQ5 DQ6 VSSQ DQ7 NC VDDQ LDQS NC VDD NC LDM ~WE ~CAS ~RAS ~CS NC BA0 BA1 A10 A0 A1 A2 A3 VDD

0.1

ARDATA0 ARDATA1 ARDATA2 ARDATA3

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33

1 C1304

R1325 33*4

0.1

10 C1302

C1301

DDATA27 DDATA26 DDATA25 DDATA24

0.1 0.1

Clock:121.5MHz

C1303

ARCS1

33*4 RAB4CQ330J-T

0.01

ARCLKEN

R1252

0(S)

220/4 C1315

C1239 0.1(S) C1240 0.1(S) C1241 0.1(S) C1242 0.1(S) DDATA31 DDATA30 DDATA29 DDATA28

R1318

VDPIDO20 VDPIDO21 VDPIDO22 VDPIDO23 VDPIDO24 VDPIDO25 VDPIDO26 VDPIDO27 VDPIDO28 VDPIDO29

GNDD

C1223

C1105 0.1(S)

C1104 10 YB

UART V+3D

PLLON

0.1

CODEC

RX3I

CTS

7 2 1 4 3 6 5 8 7

VREF

TSDATBDEN TSDATBERR TSDATBSYN

DDQS1

0.1(S)

66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34

DTR

V+2R5D

VSS DQ15 VSSQ DQ14 DQ13 VDDQ DQ12 DQ11 VSSQ DQ10 DQ9 VDDQ DQ8 NC VSSQ UDQS NC VREF VSS UDM ~CK CK CKE NC A12 A11 A9 A8 A7 A6 A5 A4 VSS

RTS3 INT6

DADRS12 DADRS11 DADRS9 DADRS8 DADRS7 DADRS6 DADRS5 DADRS4 C1211

TX3

RS-232C

3 6 5 8 7 RAB4CQ330J-T

VDD DQ0 VDDQ DQ1 DQ2 VSSQ DQ3 DQ4 VDDQ DQ5 DQ6 VSSQ DQ7 NC VDDQ LDQS NC VDD NC LDM ~WE ~CAS ~RAS ~CS NC BA0 BA1 A10 A0 A1 A2 A3 VDD

RXD

DDM1 DCLKNO DCLKO DCLKEN

R1247 10k(S)

0.1

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33

0.1(S)

1 C1222

DDATA16 DDATA17 DDATA18 DDATA19

IC1221 EDD1616AATA-6B

220/4 C1231 R1251 33*4

C1221

R1246 33(S) R1249 100k(S) 0.1(S) C1233

C1220 10

128Mbit DDR SDRAM (8M*16bit) DEC/ENC

C1213

1000p(S)

33*4 RAB4CQ330J-T

DDATA11 DDATA10 DDATA9 DDATA8

C1209

1000p(S)

DBA0 DBA1 DADRS10 DADRS0 DADRS1 DADRS2 DADRS3

C1210

DDM0 DWE DCAS DRAS DCS

TXD

VKN1411-A-TBB

GNDD

R1244

C1208

100k(S) (T23) (T22)

1000p(S)

GNDD

0.01(S)

33(S)

DDATA15 DDATA14 DDATA13 DDATA12

GNDD

RAB4CQ330J-T

R1245 R1248

DDQS0

C1207

C1205

7 3 4 1 2 R1243 33*4 RAB4CQ330J-T

R1242 33*4

0.01(S)

C1206

R1904 22(S)

TSDATB4 TSDATB5 TSDATB6 TSDATB7

V+3D

Vertical type 22(S)

C1204 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34

10 C1212

0.1(S)

C1201

150/4 C1215 RAB4CQ330J-T

DDATA4 DDATA5 DDATA6 DDATA7

VSS DQ15 VSSQ DQ14 DQ13 VDDQ DQ12 DQ11 VSSQ DQ10 DQ9 VDDQ DQ8 NC VSSQ UDQS NC VREF VSS UDM ~CK CK CKE NC A12 A11 A9 A8 A7 A6 A5 A4 VSS

C1115 1 GNDD

R1907 10K(S)

0.1(S)

VDD DQ0 VDDQ DQ1 DQ2 VSSQ DQ3 DQ4 VDDQ DQ5 DQ6 VSSQ DQ7 NC VDDQ LDQS NC VDD NC LDM ~WE ~CAS ~RAS ~CS NC BA0 BA1 A10 A0 A1 A2 A3 VDD

HDOE

HCS0 HADRS1

V+5D

CN1901 R1903

RX2I

IC1201 EDD1616AATA-6B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33

R1127 47(S)

R1908 10K(S)

DDATA0 DDATA1 DDATA2 DDATA3

TX2

Clock:135MHz

1 C1203

V+3D

V+5D

R1219

CLKEN

HDATA15 HDATA7 HDATA14 HDATA6 HDATA13 HDATA5 HDATA12 HDATA4 C1113 HDATA11 HDATA3 HDATA10 HDATA2 HDATA9 HDATA1 HDATA8 HDATA0

C1902 1 YF

GNDD

R1901 10K(S)

0(S)

R1902

R1218

XRESET

HADRS17

S29GL064M90TCIR20-K 64M(48PIN : 3–26PIN, 31–54PIN)

V+2R5D IC1011 TC7SH08FU-TLB 1 VCC 5 2 3 GND 4

10K(S)

8 5 6 4

10K(S) 10K(S) 10K(S) 10K(S) ***(S) 10K(S) 10K(S) 10K(S) 10K(S) 10K(S) 10K(S) 10K(S) 10K(S) 10K(S)

GNDD

C1202

R1110

R1241 33*4

0(S)

HADRS19 HADRS18 HADRS8 HADRS7 HADRS6 HADRS5 HADRS4 HADRS3 HADRS2

R1107

0(S)

R1054 10K*4

56 NC(A23) (A24)NC NC 55 A22 A16 54 A15 BYTE 53 A14 VSS 52 A13 D15 51 A12 D7 50 A11 D14 49 A10 D6 48 A9 D13 47 A8 D5 46 A19(A21) D12 45 A20 D4 44 XWE VCC 43 XRESET A21 D11 42 (NC/ACC) WP/ACC D3 41 RY/BY(A19) D10 40 A18 D2 39 A17 D9 38 D1 37 A7 D8 36 A6 D0 35 A5 OE 34 A4 VSS 33 A3 CE 32 A2 A0 31 A1 NC NC 30 NC VIO 29

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

2.2 YB

5 6 3 4 1 2

10K(S) ***(S) 10K(S) 10K(S) 10K(S)

L1006

L1102

10K(S) 10K(S) 10K(S) 10K(S) 10K(S)

RAB4CQ103J-T R1070 R1071 R1078 R1079 R1080 R1081 R1058 R1059 R1060 R1061 R1062 R1063 R1082 R1083

DTL1106- -T

1 1

7 8 5 6 3 4 1 7

8 2

5 6 3 4 1 7

8 2

5 6 3 4 1 2

HADRS23 HADRS16 HADRS15 HADRS14 HADRS13 HADRS12 HADRS11 HADRS10 HADRS9 HADRS22 HADRS20 HADRS21 HWS0 XRESET

R1051 10K*4 RAB4CQ103J-T R1052 R1074 R1075 R1053 R1055

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

IC1102 VYW2308 FLASH ROM

R1047 10K*4 RAB4CQ103J-T

DCLKEN 1 DTL1106- -T 2

V+3D

R1113 0(S)

R1067 10K(S)

8 5

6 3

4 1 7

8 2

6 3

4 1 7

8 2

6 3

4 1

REC656I4 REC656I5 REC656I6 REC656I7

GNDD

RAB4CQ103J-T

R1090 R1091 R1092 R1093 R1068

V+2R5D

V+2R5

DVDAREQ

H 3/5

RTS0 SCLK1 RTS2 INT7 RTS1 SPICS HADRS22 SPDIFI ACMOD0 ACMOD1 DVDAREQ SRCLRCKI SRCBCLKI SRCDATAI CSYNC SPIDATAI SPIDATAO CTS2 HADRS23 CTS3 TESTMOD0 TESTMOD1 TESTMOD2 TESTMOD3 TESTMOD4 TESTMOD5 TSDATBRDY TSDATBACK

DACCLKOUT DVAMCLKO ADCCLKO 3-D4 PXCLK SPICLK CTS3 SRCDATAI SRCBCLKI SRCLRCKI PCO TESTMOD0 3-D1 TESTMOD1 TESTMOD2 TESTMOD3 TESTMOD4 TESTMOD5 PLLON SCLK1 RX1 NSDARX0 HDREQ0 HDREQ1 HDACK0 HDACK1 CSYNC

REC656I0 REC656I1 REC656I2 REC656I3

10K(S) 10K(S) 10K(S) 10K(S) 10K(S) 10K(S)

REC656O4 REC656O5 REC656O6 REC656O7

R1084 R1085 R1086 R1066 R1048 R1065 GNDD

R1087 10K(S) R1088 10K(S) R1089 10K(S)

R1046 10K*4 RAB4CQ103J-T

R1045 10K*4

REC656O0 REC656O1 REC656O2 REC656O3 1

CTS1 SCLK0 HWAIT INT4 INT5 HDACK0 HDACK1 NSCS0 NSCS1 NSCLK0 NSCLK1 RX1

R1044 10K*4 RAB4CQ103J-T

R1043 10K*4 RAB4CQ103J-T

R1042 10K*4 RAB4CQ103J-T

CTS0 RX0 TX0 SPICLK

HCS0 HCS1 HDOE HWS0 HCS3 HCS2 HCS5 HCS4 HWS1 INT3 INT0 TX1 NSDATX0 NSDATX1 NSDARX1 DBI INT2 TRACE

(Cr)

ATA

(Cb)

(AT)

: Y Video Signal Route

(VD)

: ATAPI Data Signal Route

: C Video Signal Route

: Video Data Signal Route

: Cr Video Signal Route

: Audio Signal Route (L ch)

: Cb Video Signal Route

H 1/5

(Yp)

: Yp Video Signal Route

DVR-530H-S 5

3.10 MAIN ASSY(2/5) Power for VIDEO DAC V+5AVI

22ÂµH L2101

V+5VIDEO

100/16

C2101

H 2/5 MAIN ASSY (VXX2997)

VTL1067- -T

GNDD

180F

0.300Vpp

(C)

0.1

0.7Vpp

(Cb)

B C Q2502 2SA1576A(QR)-TLB

CR_OUT

0.7Vpp

R 0.7Vpp

(Cr)

(Yp)

(C)

0.1

C2503

680(S)

R2507

0.1

0.7Vpp

C2502

CB_OUT

680(S) E

R2504

(Yp)

0.1

C2504

R2510

680(S)

B C Q2503 2SA1576A(QR)-TLB

(Y)

CVBSIN 4-B1

(Cb)

H 4/5 0.1

R2513

C2505

B C Q2504 2SA1576A(QR)-TLB 680(S)

R2502

180F

R2514

Cr_OUT

C_OUT

(Cr) CCRIN 4-B1

GNDD

1-D3 ROUT

(Cr)

R2515

(C)

G 0.7Vpp

GNDD

R2512

Cb_OUT

180F

R2505

(Cb)

R2511

1-D3 BOUT

(Y)

1Vpp

GNDD

R2509

Yp_OUT

R2503 1-D3 GOUT

R2506

H 1/5

(Yp)

R2508

180F

C_OUT

1-D3 COUT

1Vpp

CY_OUT

GNDD

180F

(C)

Y_OUT

B C Q2501 2SA1576A(QR)-TLB

Y_OUT

(Y)

1-D3 YOUT

C2501

I/V Conversion

680(S)

R2501

Analog Video OUTPUT

(C)

B C Q2505 2SA1576A(QR)-TLB GNDD

GNDD GIN 4-B1

OUTPUT Level Adj.

E CBIN 4-B1

Analog Video INPUT

H 2/5 32

DVR-530H-S 1

(Y) (C) (Cr) (Cb)

: Y Video Signal Route

: C Video Signal Route : Cr Video Signal Route : Cb Video Signal Route

(Yp)

: Yp Video Signal Route : Audio Signal Route (L ch)

2 R2521

R2522

0(S) (Y)

(Y)

0(S) (C)

(Yp)

4 R2523

(Cr)

0(S) (Cb)

Audio OUT R2525

GND

CMtoT

GND

YMtoT

GND

Y/GMtoT

GND

Cb/BMtoT

GND

Cr/RMtoT

GNDA

ALMtoT

GNDA

(Cb)

0(S) (Yp)

5 R2524

0(S) (Cr)

LCHOUT 3-B3

H 3/5 RCHOUT 3-A3

GNDA R2208

ARMtoT

GNDA

/BTtoM

GND

GTtoM

0(S)

(Y)

CTtoM

GND

V/YTtoM

GND

3-D2

ALTtoM

H 3/5

GND

ARTtoM

GND

(Y)

(C)

GND

(C)

(Y)

R2206

LCHIN

(C)

B 2/2 CN402

(C)

0(S)

RCHIN 3-D2

Audio IN

CN2201 VKN2011- -TBB GNDD

R2204 0(S)

CHIP SIZE RESISTOR : 2 1 2 5 size RS1/10S–

: 1 6 0 8 size RS1/16S– R2202

CAPACITOR

0(S)

: 2 1 2 5 size CKSQ**– : 1 6 0 8 size CCSR**– CKSR**–

UMF21N-TLB C1 B2 E2

C1 B2

F E1

H 2/5 33

DVR-530H-S 5

3.11 MAIN ASSY(3/5) V+3D

10K(S)

C3219 1

33/36M

GNDD

3-C3

R3229 0(S) NSCS0 R3231 0(S) NSCLK0 R3232 0(S) NSDATX0

V+12A

R3209 8.2k(D)

330p

R3216 680(S)

GNDD GNDA

4.7K(S) 3

+6dB

R3224

56(D)

8.2k(D)

R3221 680p

R3223

C3210

GNDA GNDA

H 2/5

C3215

IC3202 UPC4570G2-TFB

R ch

H 2/5

RCHOUT 2-B6

0.1

R3217 0(S)

GNDA

5 R3225 6

4.7K(S)

L ch

R3211 100(S)

GNDD

C3209

0.1

100/16

R3215

22K(S) C3216

GNDA

R3214 6.8K(S)

4Vp-p

120p 8 1

100(S)

56(D) V+5A

C3207

680p

C3204

R3210

100(S)

R3208

100/16

YB C3214 10

R3207 15k(D)

R3212

IC3201 PCM1742KE-TBB

0.1

C3203

ZEROR

C3206

0 R3206

Power for AUDIO Output

C3208

4Vp-p

R3203

R3205 C3218 100/6.3

R3201

0 0.1

C3202

C3212 100/6.3

C3217 0.1 SCK 16 ML 15 MC 14 MD 13 ZEROL 12 ZEROR 11 Vcom 10 AGND9

BCK DATA LRCK DGND NC(VDD) Vcc VoutL VoutR

IC3202 4 UPC4570G2-TFB

R3222

V+6V GNDD

2ch DAC 1 2 3 4 5 6 7 8

R3204 AMUTE 0(S) IC3203 BD4850G-TRB 1 Vo NC 5 2 Vdd 3 GND NC 4

RN1903-T E2

Q3201 E RN1903-T

GNDA GNDA

R3227 0(S) BCKO ADATAO R3228 0(S) LRCKO R3230 0(S)

INT8 (MUTE)

GNDA GNDA

Q3201 C2

V+3D

Power for DAC Analog section

V+5A

LCHOUT 2-B6

100(S)

8 C3211 120p

R3226 15k(D)

CN3001 VKN2011- -TBB

B_IR B_UP 1-A5,1-B5

SPDIFO V+3D

XRSTIN XRST5 SST_TO_M HST_TO_M

H 4/5

MRST

1 19 G1 G2

CTS0 XRST2

4-A6

V+6V

R3010 0(S) 4-A6

R3015 10k(S)

F3303 DTF1069- -T

1 R3304 0(S) 1 2 VC3301 ***

C3304 2p

C3303 2p 1 1 2 2

LCHIN 2-B6

L ch

R3108

RCHIN 2-B6

R ch

R3109

18M

3-A2 3-D4

18.4320MHz

10 R3322

AMCLK1

0(S)

36.8640MHz

1-A2

H 1/5

XRESET V+5A

IC3101 PCM1802DB1-TBB

0(S)

GNDD GNDD

33/36M

2 5 4 3

GNDD

33.8688/~36.8640~MHz

C3103

12.000MHz

0(S) 1 1 2 2

C3102

GNDD

H 3/5

0.1

H 2/5

22(S)

IC3304 TC7SAU04FU-TLB

R3101

HIGH 0.01

OFF(LOW)

R3305

V+3D

CLKG

LOW

GNDD

20 19 18 17 16 15 14 13 12 11

22(S)

IC3301 CY244ZXC-04D-TBB

1 C3105

100k(D)

GNDD

C3312 0.1

100k(D)

R3315

R3314

GNDD NJU7013F-TLB

0(S)

C3317

39k(S) V+3CG

R3312 R3311 4.7k(S)

0.01

PCO 1-B4

GNDD R3313

XOUT VDD CLKF CLKE VSS CLKD CLKC VDD FS0 CLKG

R3318

CLK GEN. IC

GNDD

FS1

IC3303 1 + 5 R3310 4 220(S) 3 2

C3311

H 1/5

1 YB R330927k(S)

1SS355-TRB D3101

C3309 0.1

C3310

XIN NC AVDD VIN AVSS NC CLKA VSS CLKB FS1

10k(S)

22(S)

1SS355-TRB D3103

33.8688MHz

R3320

R3301

AMCLK2 1-A2

C3318 47/10

V+3CG

C3302 10

22(S)

1-A2,4-A1 27.00MHz

C3306 1

1 2 3 4 5 6 7 8 9 10

R3110 1KF

VMCLK

R3306

C3305 1

0.1

H 1/5,4/5

GNDD

10k(S)

R3302

2 F3305 DTF1069- -T

GNDD GNDD

GNDD X3301 VSS1204- -T 27MHz 1 2

C3314 220/4 YB

CTS1

1 2 C3301 DTF1069- -T 10

V+13SW

H 4/5

F3304

4-B6

33.8688MHz

D3102

0.01

GNDD

V+37E

36.8640MHz V+3D

V+3CG

24 25

CLKE

LOW HIGH NSDARX0 V+3CG

0.1 C3104

4-A6

R3011 10k(S)

V+13E

C3003

C3004 0.1

4-B6

FS0

H 4/5

V+6E

GNDD

D3104

IC3001

AMUTE

C3101

H 4/5 XEDRST 4-C2

R3009 0(S)

RX2I RX3I

TX0

R3008 0(S)

R3005 GNDD RX0 100(S) R3006 INT3 (TUREQ) 100(S) RX2 R3012 0(S) RX3 R3013 0(S) R3014 0(S) PLLRST R3016 0(S)

2 C3106 1 F3101 0.1 DTF1069- -T

(VCM1012- -TRB)

PCONT 4-A6

R3004 0(S)

R30070(S)

B118 B217 B3 16 B4 15 14 B5 B6 13 B7 12 B8 11

C3315 1000p

XRESET 20

C3008 10 C3001 1 YF 2 A1 3 A2 4 A3 5 A4 6 A5 7 A6 8 A7 9 A8

IC3002 TC7SH08FU-TLB 1 VCC5 2 3 GND 4

C3113 0.1

TC74LCX541FT-TBB

R3026 0(S) R3001 0(S)

R3002

SCLK0

10K(S)

C3316 1

V+3D R3003 0

0(S)

10K(S)

R3021

R3111 0(S)

0(S)

R3024 0(S)

R3023

C3005 0.1 C3006 0.1 C3007

SPDIF GND ASCK GND HSTtoM XRST1 SSTtoM P_CONT SSMtoT MRST HSMtoT XRST2 V+6SW AMUTE V+6E GND V+13E GND V+37E GND V+13SW X525P

0.1(50V)

B 2/2 CN401

GND GND GND B_IR B_UP

1 2 3 4 5 6 7 8 9 10

VINL VINR VREF1 VREF2 VCC AGND PDWN BYPAS TEST LRCK

A/D

MODE1 MODE0 FMT1 FMT0 OSR SCKI VDD DGND DOUT BCK

20 19 18 17 16 15 14 13 12 11

GNDD

R3105 0(S)

R3106 10(S)

18M

GNDD R3107 10(S) ADATAI R3104 10(S) BCKI LRCKI

DVR-530H-S 1

CPU CONTROL BUS DAC/ADC

H 1/5

H 3/5 MAIN ASSY (VXX2997)

(AT)

: ATAPI Data Signal Route : Audio Signal Route (L ch)

32 31 30 29 28 27 26 25

R3806 22K*4 RAB4CQ223J-T

R3807 22K(S)

IC3706

GND OUT

2 NC VCC 3

33(S)

BU4828F-TRB

4 5 6 7

R3811 33*4 RAB4CQ330J-T

8 9 10 11

R3812 33*4 RAB4CQ330J-T

12 13 14 15

R3813 33*4 RAB4CQ330J-T

16 17 18 19

R3815 5.6K(S)

AT1DMARQ

R3814

AT1DIOW

82(S) R3816

AT1DIOR

22(S) R3817

AT1IORDY

22(S) R3818

AT1DMACK

82(S) R3820

AT1INTRQ

22(S) R3821

AT1ADR1

82(S) R3823

GNDD V+1R2

R3810 33*4 RAB4CQ330J-T

20 21 22 23 24 25

R3819 1K(S)

26 27 28 29

R3822 10K(S)

30 31 32 33

IC3707

34 35

R3824 RAB4CQ330J-T 33*4

36 37 38 39

GND OUT

33(S)

NC VCC

C3738 1

R3714

8 6 4 2

AT1ADR0 AT1ADR2 AT1CS0 AT1CS1 V+5D

7 5 3 1

33(S)

BU4809F-TRB

VKN1794- -TFB

V+5D

CN3801

GNDD R3826 0(S)

Primary ATA C3802 1

GNDD

ATAPI

1 1 1 1 1 1 1

1 1 1

7 5 3 1 7 5 3 1 7 5 3 1 7 5 3 1

R3837 33*4 RAB4CQ330J-T R3838 33*4 RAB4CQ330J-T

R3839 33*4 RAB4CQ330J-T R3840 33*4 RAB4CQ330J-T R38425.6K(S)

AT2DIOW

82(S) R3843

AT2DIOR

22(S) R3844 22(S)

5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

1 1

1 1 1

AT2DMACK

R3845 R3846 82(S) 1K(S) R3847 22(S)

2 3

AT2DMARQ

R3841

AT2IORDY

R3833 RAB4CQ223J-T 22K*4 R3834 22K(S)

AT2DATA7 AT2DATA8 AT2DATA6 AT2DATA9 AT2DATA5 AT2DATA10 AT2DATA4 AT2DATA11 AT2DATA3 AT2DATA12 AT2DATA2 AT2DATA13 AT2DATA1 AT2DATA14 AT2DATA0 AT2DATA15

R3832 RAB4CQ223J-T 22K*4

82(S) 8 6 4 2 8 6 4 2 8 6 4 2 8 6 4 2

1 1 1 1 1

R3831 RAB4CQ223J-T 22K*4

8 6 4 2 8 6 4 2 8 6 4 2 8 6 4 2 8 6 4 2 8 6 4 2

1 1

R3830 RAB4CQ223J-T 22K*4

R3835

AT2RESET

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

R3829 RAB4CQ223J-T 22K*4

AT2RESET AT2DATA7 AT2DATA8 AT2DATA6 AT2DATA9 AT2DATA5 AT2DATA10 AT2DATA4 AT2DATA11 AT2DATA3 AT2DATA12 AT2DATA2 AT2DATA13 AT2DATA1 AT2DATA14 AT2DATA0 AT2DATA15 AT2DIOW AT2DIOR AT2DMACK AT2ADR1 AT2ADR0 AT2ADR2 AT2CS0 AT2CS1

R3828 RAB4CQ223J-T 22K*4

7 5 3 1 7 5 3 1 7 5 3 1 7 5 3 1 7 5 3 1 7 5 3 1

GNDD

RESET# GND DD7 DD8 DD6 DD9 DD5 DD10 DD4 DD11 DD3 DD12 DD2 DD13 DD1 DD14 DD0 DD15 GND KEYPIN DMARQ GND DIOW# GND DIOR# GND IORDY CSEL DMACK# GND INTRQ RESERVED DA1 PDIAG# DA0 DA2 CS0# CS1# DASP# GND

AT2ADR1 7 5 3 1

8 6 4 2

34 35

1 1 1 1 1 1

V+5D

R3851 33*4 RAB4CQ330J-T

32 33

33(S) AT2ADR0 AT2ADR2 AT2CS0 AT2CS1

30 31 1

R3848 R3849 82(S) 10K(S) R3850

AT2INTRQ

36 37 38 39 40

RESET# GND DD7 DD8 DD6 DD9 DD5 DD10 DD4 DD11 DD3 DD12 DD2 DD13 DD1 DD14 DD0 DD15 GND KEYPIN DMARQ GND DIOW# GND DIOR# GND IORDY CSEL DMACK# GND INTRQ RESERVED DA1 PDIAG# DA0 DA2 CS0# CS1# DASP# GND

CN12

R3713 MRST

2 3

V+3D

82(S) AT1DATA7 AT1DATA8 AT1DATA6 AT1DATA9 AT1DATA5 AT1DATA10 AT1DATA4 AT1DATA11 AT1DATA3 AT1DATA12 AT1DATA2 AT1DATA13 AT1DATA1 AT1DATA14 AT1DATA0 AT1DATA15

To DRIVE ASSY R9R CN9003

R3805 22K*4 RAB4CQ223J-T

R3808

AT1RESET 7 5 3 1 7 5 3 1 7 5 3 1 7 5 3 1

R3804 22K*4 RAB4CQ223J-T

AT1RESET AT1DATA7 AT1DATA8 AT1DATA6 AT1DATA9 AT1DATA5 AT1DATA10 AT1DATA4 AT1DATA11 AT1DATA3 AT1DATA12 AT1DATA2 AT1DATA13 AT1DATA1 AT1DATA14 AT1DATA0 AT1DATA15 AT1DIOW AT1DIOR AT1DMACK AT1ADR1 AT1ADR0 AT1ADR2 AT1CS0 AT1CS1

8 6 4 2 8 6 4 2 8 6 4 2 8 6 4 2

R3803 22K*4 RAB4CQ223J-T

8 6 4 2 8 6 4 2 8 6 4 2 8 6 4 2 8 6 4 2 8 6 4 2

R3802 22K*4 RAB4CQ223J-T

GNDD

7 5 3 1 7 5 3 1 7 5 3 1 7 5 3 1 7 5 3 1 7 5 3 1

47k

R3801 22K*4 RAB4CQ223J-T

(B_uCOM_RST)

C3737 1

ATAPI

GNDD

R3406 0

INT7

to DVD-RW/R Drive (AT)

B_ÂµCOM_DL C3403 *** CH

ATAPI

V+3D

C3801 1

R3401 0

H 1/5

R3862 0(S)

3 2 1

X3401 CSS1616- -T 16MHz

R3407

PTD1/XRESET PTD0

R3403

EXTAL XTAL

17 18 19 20 21 22 23 24

VDD VSS IRO

C3402 *** CH

9 10 11 12 13 14 15 16

0.1 YF

C3401

C3404 10

TXD1 RXD1

B_IR

8 7 6 5 4 3 2 1

V+5D

R3404 0 R3405 0

RX1 TX1

IC3401 T-VIC221 Blaster U-com

R3402

V+3D

VKN1794- -TFB

CN3802 (FROM CLK) R3113 0(S)

18M

GNDD

Secondary ATA to HD Drive

3-C3

F R3114

H 3/5

0(S)

DVR-530H-S 5

EDCLK

YB 1

R4237 R4238 R4239 R4240

1 YF 1 YF

R4230

EDCAS EDDQM EDA3 EDA4 EDA5 EDA6 EDA7 EDA8 EDA9

EDD18 EDD19

R425110k(S) TIN C42141 YF

R4252 22*4 8 6 4 2 8 6 4 2

7 5 3 1 7 5 3 1

C42131 YF

R4253 22*4

R4229 22 REC656I0 REC656I1 REC656I2 REC656I3 REC656I4 REC656I5 REC656I6 REC656I7

GNDD

FROM PRISM2

N2I BUS

H 1/5

H 4/5 DVR-530H-S 3

C4274 1 YF

R4231 10k(S)

C4276 0(2125) 220/4

1 YF C4216 1 YF C4215 1 YF

EDRAS

1 YF C4217

XEDRST 3-C3

GNDD

C4211 C4212

MCLK VDDE

H 3/5

EDD16 EDD17 EDA2 EDA1 EDA0 EDA10 EDBA C4218 1 YF

C4285 NSDARX1 NSDATX1 NSCLK1 NSCS1

(C)

C4278 1 YB

C4219 1

85 86 87 88

VRO2 VREF2 AVDDA2

2 4 6 8 2 4 6 8

V+1R8

VDDI 132 VSS 131 MD(16) 130 MD(17) 129 MA(2) 128 MA(1) 127 MA(0) 126 MA(10) 125 MBA 124 MRAS 123 VDDE 122 VDDI 121 VSS 120 MCAS 119 MDQM118 MA(3) 117 MA(4) 116 MA(5) 115 MA(6) 114 MA(7) 113 MA(8) 112 MA(9) 111 VDDE 110 VDDI 109 VSS 108 MD(18) 107 MD(19) 106 HD 105 VSS 104 TIN 103 VDDI 102 VSS 101 VDDE 100 RCLKO 99 DOUT(0) 98 DOUT(1) 97 DOUT(2) 96 DOUT(3) 95 DOUT(4) 94 DOUT(5) 93 DOUT(6) 92 DOUT(7) 91 DOUT(8) 90 DOUT(9) 89

C4270 1 YF 0.1 YF 0.1 YF C4271 1 C4210 YF 1 YF 0(S) 0(S) 0(S) 0(S)

0(S)

C4255 C4256

R4236

GRDT9 GRDT8 GRDT7 GRDT6 GRDT5 GRDT4 GRDT3 GRDT2 GRDT1 GRDT0

INT0 (EDINT)

GNDD

1 3 5 7 1 3 5 7

C42661 YF

C4268 220/4

V+3AED

C4253 0.1 YF 0.1 C4254 YF 10k(S) R4247

C4250 C4205

(C)

H 4/5

YF YF

C4265 C4249

YF YF

C4290 1 YB

C4267 1 C4251 0.1 0.1 C4252 C4269

(C)

YF 10k(S)R4275 C4209 1

CCRIN 2-B5 CBIN 2-C5

R4246 0(S)

YB 1 (Y)

2-B5

CVBSIN 2-B5 1.0Vpp

68p CH

C4288

GIN

(Y)

GNDD

GNDD GNDD

IC4201 CM0045AF-K Video Decoder

(XEDRST)

GNDD GNDD 2SA1576A(QR)-TLB

E C4243 R4217 0.1YB 10 B Q4203 C 2SA1576A(QR)-TLB

R4218 47k

33p CH

6.8 Âµ

R4243 10k(S) R4244 10k(S)

GNDD

L4203 LCYA6R8J2520-T C4246

R4216

E 220 R4219 10 B C Q4202

150

R4220

GNDD

R4215 330

H 1/5,3/5

GNDD

R4242 10k*4

1 YF

GNDD

R4214 330

C4240

1-A2,3-C2

H 2/5

V+3AED C4239 1 YF

V+3AED

C4245

F4282

YF 1 C4297 YB 5 GNDD 1000p R4283 4 2 22 3 IC4282 VMCLK(27M) TC7SHU04FU-TLB

R4233 0(S)

GNDD

V+3D C4284

R4206 1.1k(F) 1 AOUT2 2 AVSDA2 3 AVDDA1 4 VREF1 5 VRO1 2.7k(F) 6 AOUT1 C4258 7 1 YF 8 AVSDA1 C4203 9 AVDPL1 AVSPL1 1 YF 10 VDDE 11 C4204 12 SININ1 ITHR 1 YF 13 VDDI 14 RCLKI 15 C4259 SMCK 1 YF 16 VSS C4244 17 AVDAD0 0.1 YF 18 VRH0 19 C4260 VRL0 1 YF 20 C4261 0.1 YF 21 AVSAD0 C4291 22 AVDPG0 SYNCIN 0.1 YF 23 GIN C4262 24 0.1 YF 25 CO0 C4275 26 AVSPG0 ATST0 33p 27 C4263 28 AVSPG1 CO1 0.1 YF 29 CVBSIN C4264 30 AVDPG1 1 YF 31 AVSAD1 0.1 YF 32 VRL1 33 0.1 YF 34 VRH1 AVDAD1 35 VSS 1 1 YF YF 36 VDDI 37 VDDE C4206 38 1 YF 39 CLK8(28.6M) CLK4(14.3M) 40 GCLP 41 C4207 42 REQ 1 YF VSS 43 VDDI 44 VDDE C4208 1 YF

C4257 YF C4232 1 1 YF R4210

45 46 AS 47 DIN(9) SEL 48 DIN(8) 49 DIN(7) 50 DIN(6) 51 DIN(5) 52 DIN(4) 53 DIN(3) 54 DIN(2) 55 DIN(1) 56 DIN(0) 57 VDDI 58 DVCK 59 VSS 60 RESETX 61 TEST0 62 TEST1 63 AVDAD2 64 VRH2 65 VRL2 66 AVSAD2 67 AVDBF2 68 CCRIN 69 CO3 70 CO2 71 AVSBF2 72 ATST1 73 AVSBF3 74 CBIN 75 AVDBF3 76 AVSAD3 77 VRL3 78 VRH3 79 AVDAD3 80 VSS 81 VDDE XCS VDDI 82 RX 83 SDATX VDDE VSS 84 SCL

GNDD

X4281 VSS1205-A-T 27MHz

(27M)

R4201 2.2k(F)

R4241 10k*4

0(2125)

R4204 2.2k(F)

C4201 220/4

R4232

R4284 1k(S)

C4282 DTF1069- -T 12p CH

C4281

12p CH

R4285 1M(S) 1 2

GNDD

(VD)

V+1R8

C4283 IC4281 1 YF C4296 TC7SHU04FU-TLB 54 R4281 YB 1000p 2 (27M) 22 3 GNDD GNDD

C42021 YF

F4281

DTF1069- -T

V+3D

1.1k(F) R4202 C4229 1 YF R4203 176 2.7k(F) 175 174 C4228 VSS 173 1 YF VDDI 172 SININ2 171 R4249 SM 170 10K(S) MST 169 C4273 AVS 168 1 YF AVD 167 VDDE 166 C4227 XTST 165 1 YF XIN 164 C4248 VGS 163 1 YF CPO 162 R422110(S) AVDPL0 161 C4272 YF AVSPL0 160 R4248 1 VSS 159 10K(S) PDOUT 158 VDDI 157 1 YF C4226 VSS 156 C42251YF VDDE 155 EDD0 MD(0) 154 EDD15 MD(15) 153 EDD1 MD(1) 152 EDD14 MD(14) 151 EDD2 MD(2) 150 EDD13 MD(13) 149 EDD3 MD(3) 148 EDD12 MD(12) 147 EDD4 MD(4) 146 VDDI 145 C4224 1 YF 1 YF VSS 144 C4223 VDDE 143 EDD11 MD(11) 142 EDD5 MD(5) 141 EDD10 MD(10) 140 EDD6 MD(6) 139 EDD9 MD(9) 138 EDD7 MD(7) 137 EDD8 MD(8) 136 EDWE MWE 135 R4228 EDCLK 134 22 (27M) 133 C4222

3.12 MAIN ASSY(4/5)

H 1/5

(VD)

H 4/5 MAIN ASSY (VXX2997)

C4220 R4224 220/4 0(2125)

GND

SW6

GND

SW3.45

GND

C45510.1(50V)

SW5W

GND

SW12.5J

GND

EV+13

GND

H 1/5

C45580.1

V+13SW 3-C1 C45590.1

C45600.1

V12W GNDW SW5W

Side-B E

V+12A Power for AUDIO

2.2

V+5D

GNDD

0.01C4508

NJM2872F05-TLB

C4509

C4507

C4505

C4536

Ø4

IC4504

GNDD

Q4501 2SC2411K(QR)-TLB

+13.5V

0.1 100(S) C4506 R4501

2.2

V+13SW

V+5A

100/16

0.1

1 5 IN OUT 2 GND 3 4 CNT BY

TP4503

V+5AVI

V+5A : Power for AUDIO V+5AVI : Power for VIDEO

0.01C4502

C4503

C4501

C4534

0.1

5V REG(Digital)

C4562 0.1

SW5 4

GNDD

C4561 0.1

GND 3

GNDD

D4506 RB160M-40

GNDD

100/16

TP4518 GNDD

VREF (1.25V) C4524 0.1

100K(D)

R4536 R4537

C4523 0.1 100K(D) GNDD

1 + 5 R4538 4 0(S) 3 2 IC4511 NJM7013F-TLB

H 3/5

GND 2

R4522

NJM2872F05-TLB

V+13E 3-C1

S4B-PH-SM3-TBB

IC4503

Side-B

0.1 C4557

SW12.5W 1

5V REG(Analog) V+6V 1 5 IN OUT 2 GND 3 4 CNT BY

V+3R45

V+5SW

GNDD

V+3D

C45530.1

C4556 0.1 C45550.1

CN4502

V+2R5D

V+6V 3-C2

C45540.1

SW12.5W

To DRIVE ASSY R9R CN9022

C45520.1

SW5(1.2V) 12 GND

H 3/5

V+6E 3-C1

0.1

R656CLKI (27M) 1-A1

VDPIDI6 VDPIDI7 VDPIDI8 VDPIDI9

CN201

GND

C4504

VDPIDI2 VDPIDI3 VDPIDI4 VDPIDI5

EV6

PCONT 3-C1 V+37E 3-C1

C4537 100/16

7 5 3 1

0.1

8 6 4 2

VDHSYNCI VDVSYNCI VDPIDI0 VDPIDI1

22*4 R4358

7 5 3 1

EV37

VDPIDO19

22*4

H 1/5

P_ON

VDPIDO18

22*4 R4360

EDA6 EDA7 EDA8 EDA9

CN4501

VDPIDO14 VDPIDO15 VDPIDO16 VDPIDO17

8 6 4 2

EDDQM EDA3 EDA4 EDA5

R4356

VKN2012- -TBB

P_DATA I/O

EDD11

R4364 22

VDPIDO10 VDPIDO11 VDPIDO12 VDPIDO13

(VD)

7 5 3 1

8 6 4 2

22*4 R4362 22

7 5 3 1

EDD4

EDA10 EDBA EDRAS EDCAS EDWE EDCLK EDA2 EDA1 EDA0

22*4 R4354

7 5 3 1

EDD2 EDD13 EDD3 EDD12

R4352

8 6 4 2

EDD0 EDD15 EDD1 EDD14

GNDD

8 6 4 2

C4221 1 YF

V+3D

2 1

GNDD

V+3D

: C Video Signal Route

GNDD

C4574 1

C4575 47/4

BA25F18WHFP-TRB

R4572

V+1R8 V+2R5 C4573 1

VO2 5 VO1 6 EN2 7 GND 8

C4576 47/4

GND 4 VCC1 3 VCC2 2 EN1 1

C4571 220/4

C4572

C45161

C4515 10

R4535

IC4571 T-VIC232

Ø5 Ø5

0(S)

1.8V&2.5V REG GNDD

(2125)

DIG 3.3V REG R45130

V+3R45

R45140

IC4507

1000p C4527

4.7

C4526

C4525 4.7 YB

1 CNTOUT5 2 GND 3 NC IN 4

V+3D

(S-1170B33UC-OTD-TRB) STANDBY GNDD

1.2V REG

TP4524

Side-B

YB C4545 10

(1.2V) V+1R2

47/4

R4532 R4531 1k(F) C45481.1K(F)

Vo 6 GND 5 Vc 4

YB C4532 22

C4533 1

1000p C4519

C4520 1

C4518

V+3CG 1 CNTIN 5 2 GND 3 N OUT 4

IC4509 PQ035ZN01ZPH-TLB 1 VIN 2 BIAS 3 Vo

R4533

22k(S)

560(F)

IC4512 NJM2861F33-TLB

V+3D R4534

V+5D

D4505 RB160M-40

V+3R45

C4517 0.1

(C)

G0001

(2125)

: Y Video Signal Route

(Y)

C4546 4.7

C4514 10

: Video Data Signal Route

(VD)

VOUT 1 GND 2 CE 3

IC4506 R1170S33B-TBB 6 Vdd 5 GND 4 NC

V+3R45

560(S)

V+3V

GNDD GNDD REG protection Diode is RB501V-40-TRB.

3.3V REG(for CLKGEN)

H 4/5 37

DVR-530H-S 5

3.13 MAIN ASSY(5/5) A

H 5/5 MAIN ASSY (VXX2997)

V+3D

270p

YF 1

C5101

F5101 DTF1069- -T

C5105

GNDD

TPA0P TPA0N TPB0P TPB0N

R5103 5.1k(D)

C5102 22/6.3

DTL1106- -T

C5103 YF 1

L5108

V+3D

GNDD GNDD

(27M)

RTS3 (XRSTDV)

GND

USB_DP2

GND

USB_DM2

GND

USB_A

PHYLREC R5131 10k(S)

R5137 0(S)

D_3.3V

GNDD (49.152M)

YF R51271k(S)

C5112 0.1 1

2 4 6 8 3 5 7

H 5/5 DVR-530H-S 3

X5101

R5126 680(S) C5124 1 YF

3 5 7

C5120 YF 1

2 4 6 8

R5110 10k(S) 10k(S) R5120 10k(S) R5122 10k(S)

R5128

C5121 10p

24.576M C5122 12p

GNDD 10k(S) X5101 VSS1206â&#x20AC;&#x201C;A-T (DSX530G****)

GNDD

CN601

R5116

RAB4CQ0R0J-T

USB+5V

C5123 1 TP5106

R5138 R5139

USB+5V

R5136 0(S)

PHY

17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

1 2 1 2 L5606 (R5616) 0

R5130 22(S)

GND

3 L5604 4 2 1 VTH1043- -T

1 YF R5123 10k(S)

TP5101

R5134

V+5USB

LPS

R5109 100k(S)

PHY_DATA3 PHY_DATA2 PHY_DATA1 PHY_DATA0

TPA0P TPA0N

0*4 RAB4CQ0R0J-T

A_GND

TPA_R XTPA_R

R5133

C5119

PHY_DATA7 PHY_DATA6 PHY_DATA5 PHY_DATA4

TPAP

C5118 0.1 L5605 (R5615) 0

TpB1p TpB1n AGND TpBias0 AVDD TpA0p AGND TpA0n TpB0p RI1 AGND TpB0n

TpBias1 AVDD TpA1p TpA1n

A_GND

C5113 1 YF

DGND SCLK IC(DL)

TPAN

TPB0N TPB0P

1 2 1 2 L5603 (R5613) 0

DVDD CTL0 CTL1 DGND D0 D1 DVDD D2 D3 DGND D4 D5 DGND

A_GND

XTPB_R TPB_R

CPS AVDD CMC IC(AL) PC2 PC1 PC0 AVDD IC5101 UPD72852AGB-8EU-A-K AGND X1 X0 SUS/RES DGND D7 DVDD D6

0(S) 0(S)

AGND DIRECT IC(AL) AGND AGND AVDD RESETB DVDD DGND LKON LPS DVDD SPD/BDB FNSEL LREQ DGND

PHYCTL1 PHYCTL0

TPBP

R5112 10k(S)

1 2 3 C5125 4 1 5 6 7 C5126 8 1 YF 9 10 11 C5127 12 0.1 13 14 15 16

TPBN

L5602 (R5612) 0

PHYSCLK

VTH1043- -T 2 1 3 L5601 4

CN5601 VKN2010- -TBB

64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49

48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33

GNDD

0*4

R5108 9.1k(D)

C5114 0.1

C5110 0.1 C5111 0.1 R5104 56(D) R5105 56(D) R5106 56(D) R5107 56(D)

D_3.3V

H 1/5 CPU BUS

V+3D

10k(S) R5724

GNDD

10k(S) R5728

HDREQ0 HDREQ1

V+3D INT1 R5713 10k(S)

H 5/5 39

DVR-530H-S 5

3.14 SCRB ASSY SCRB ASSY(VXX3021)

6 1 2 3

5 4 3

5 4

3 +

R/C SW IC V+5SC

***

GND GND GND

6 -

5 +

IC702 SN74AHC2G53HDCT-TRB 1 COM 2 INH 3 GND 4 GND

USB_DP1,USB_DM1 The same wiring length

V+5SC

C707 0.1

IC701 BA4558F-HT-TBB GND USB Type-B receptacle

GND

GND IC701 BA4558F-HT-TBB

SHLD

L709 ***

*** VA703

*** VA702

VA701

B 1/2 CN104

***

GND

VCC Y0 Y1 A

8 7 6 5

SN74AHC2G53 A

CN702 VKN1431- -TBB

C701 V+5SC

***

V+6E GND TUAL_TtoS GND TUAR_TtoS GND BLANK GND TUCVBS_TtoS GND XTHROU AR_TtoS GND AL_TtoS GND SC_CTtoS GND SC_YTtoS GND SC_GTtoS GND SC_BTtoS GND SC_RTtoS GND GND

V+5SC

100/10 E Q713 2SA1576A(QR)-TLB C

C714 7 0.1

6 5

C715

4 3

0.1 YB C716

0.1

C717

560F R755

R721

560F

C720 0.1

R718

GND

560F R719 560F R720

GND 8.2kF

***

560F R717

560F R756

R723

C706

12kF

0.1

***

0.1 YB C713

11 10

GND

560F R716

560F R758

GND R715

560F R757

C712

R722

C719 0.1

R724

GAIN SW1 36 1/2DRIVE1 35 VCC 34 CVBS OUT 33 GND 32 C OUT 31 ASPECT 30 GND 29 Y OUT1 28 GND 27 GND 26 G OUT2 25 VCC 24 B OUT 23 GND 22 R OUT 21 GND 20 1/2DRIVE2 19

VCC CVBS IN SQUEEZE LETTER MUTE1 C IN GND Y1 IN YCMIX Y2/G SW Y2(G) IN MUTE2 LPF SW Cb(B) IN GAIN SW2 Cr(R) IN GND REQ

Q714 2SA1576A(QR)-TLB

GND

12kF

C711 0.1

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

560F R759

0.1 YF

R725

C710

560F GND

100/10 C718

12kF

R726

E B

8.2kF

IC703 LA73054-TBB

560F R760

21 20

0.1 YF R762

C709

C762

C761

23 22

0.1 YF R761

25 24

TO JACB

L708 ***

2 -

1 R702

V+5SC

1 +5V 2 D3 D+ 4 GND

47k

IC704 ***

GND

L707 ***

47k

*** 7

R763

GND USB_VFB

JA701 ***

R701

R710

TO MAIN

C703

STBY

CN703 ***

GND GND GND USB_DP1 GND USB_DM1

V+12SC

0.1

GND

0.1

GND GND

V+13E

SDA SCL

GND

100/16

GND R731 0

GND

R730

100/10

C734

560F

R740

C745

R738

27p

R737

26 25 24

GND 23

R741

C753

560F

R746

18µ

27p

L704

10µ C752

R745

C749

L703 CH

R744 47

B Q710 2SA1576A(QR)-TLB C

*** C751

10p

18p

17 16

C748 R739 ***

68p

1k E

560F C750

R742

C747

R 19

0.1

21 20

12 11 10

27p

560F

C760

18µ CH

R743

10µ C759

R754

L706

68p

C756

L705

R753

C Q712 2SA1576A(QR)-TLB

10p R752

*** C758

*** B

C755 R751 E

18p

5 4

560F C757

0.1

C754

R750 1k

GND

SAMUTE 1-B4

9 8

***

SDA SCL GND XAVLTH GND SC_CStoT GND SC_RStoT GND SC_GStoT GND SC_BStoT GND AR_StoT GND AL_StoT GND FUNC SAMUTE GND XP_SAVE AVLOUT AVLIN GND V+5V GND V+13E

Q708 2SA1576A(QR)-TLB

L702 18µ

C744

C743

L701 10µ

68p

C739

*** C736

GND

*** C741

GND

10p R736

18p

GND

***

560F C740

CN701

C702

TO JACB

C742 R735 E

VKN1431- -TBB

0.1 YF R734

0.1

C746

***

100/10

Q705 DTC124EUA-TLB

C731

GND B

D704

GND

XP_SAVE

0.1

C730

***

C737

YF *** C738

0.1

C721

C722

C V+5SC GND

100/10

B 1/2 CN105

GND

BLANK XTHROU FUNC AVLO AVLIN XAVLTH

GND

C733

V+5SC Q704 2SC4097(PQR)-TLB C E DTA124EUA-TLB E Q703 B B

V+5V

GND

DVR-530H-S 1

*** YF

GND R732

GND

C727

UDZS12(B)-TRB

C735

100/16

GND GND ***

R727

1SS355-TRB D702 D701

C2 B2

Q701 RN4903-TRB

Q707 *** C B

GND

D XP_SAVE

C725

0.1

V+5SC

0.1 YF C726

GND

V+12SC

*** Q702 2SC4097(PQR)-TLB C E E

RN4903-TRB Q701

4.7µ (3216) C724

C728

4.7µ (3216) C723

R728

V+5SC V+5SC

V+12SC

3.9k Q801 E HN1C03FU(AB)-T

1µ

C804

1µ

C805

100/10 C806

GND

19 20 21

GND

Bin

2 23

D811

3 D812

3 D813

3 D814

D815

GND D810–D815:DF3A5.6FU-TLB

V+5SC

Gin

1.8k B C Q816 DTC124EUA-TLB

R836

GND

B E

RN4903-TRB Q807 E

2SC4081(QR)-TLB Q815

10k

R858

56k

V+5SC

C R859

47k

Q807 RN4903-TRB E2 GND

to TV

R860 1.5k

VKB1157JA802

***

C2 B2

GND

Q814 2SC4081(QR)-TLB

GND V+5SC

GND GND

V+5SC

75F (2125)

R837

1.5k

Q813 DTC124EUA-TLB B

R852

D816 RB501V-40-TRB

KN801 VNE19482

R834

R835

R/Cin

2SA1576A(QR)-TLB E Q806

3 4

Rout

GND

Lout

0.1

C859

75F (2125)

R855

R/C

13 14

GND

15 16 17 18 19

75F

C869

20 21

75F

3 G

1000/6.3

3 D822

D823

D824

3 D825

D828

V+5 3 B out 2 SW 1

C870

3 D826

GND

D822–D826,D828:DF3A5.6FU-TLB B IN 4 GND 5 B THIN 6

10/10 C866 10/10 (3216)

R856

IC804 MM1506XN-TRB

(3216) C865

V+5SC

11 V+12SC

75F

R857

22k 33k R840

C868 1000/6.3

V+5 3 G out 2 SW 1

47k

R838 C851

R841

GND

0.1

D818 ***

C867

10/10 (3216)

10 3

75F

YF 0.1

0.1 YF R839

10/10 C864

C852

B GND GND Q808 2SC4081(QR)-TLB

2 5

C862

2 1

V+5 3 R/C out 2 SW 1

G IN 4 GND 5 G THIN 6

Q809 2SC4081(QR)-TLB

SNL_O R854

IC803 MM1506XN-TRB

(3216) C863 C

GND

YF 0.1

V+5SC

75F

***

10/10 C861

5 6

R853

C875

R/C IN 4 GND 5 R/C THIN 6

IC802 MM1506XN-TRB

(3216) C860

B from MAIN V+5SC V+5SC

GND

10/10 (3216)

V+5SC

OUT

4 R842

MM1506

***

C850

Rout Rin Lout GNDA GNDV Lin Bout FUNCTION GNDV N-LINK Gout NC GNDV GNDV R/Cout BLANK GNDV GNDV V/Yout V/YIN GNDV

R862

G from MAIN

GND

V+5SC

R/C from MAIN

Rout Rin Lout GNDA GNDV Lin Bin FUNCTION GNDV N-LINK Gin NC GNDV GNDV R/Cin BLANK GNDV GNDV V/Yout V/Yin GNDV

75F

R831

75F

R830

R829

C834

3.9k

100/16

V/Yin D810

1SS355-TRB

***

1000p C849

V/Yout

R833

75F

Q805 DTA124EUA-TLB

C830

1000p C848

1000p

R832

R843

GND 16

GND

C833

D801

12 14

V/Yin

Q801 HN1C03FU(AB)-T C2 B2

R828

V+12SC

GND

GND Q804 ***

1000p C847

75F R826

47k

V+13E

3 2 1

Q802 HN1C03FU(AB)-T C2 B2

R827

10 D817 ***

7 10

3.9k

470p

470p CH C845

C844 C846

100

GND

7 9

SNL_IN

V/Yout

GND

Q803 DTA124EUA-TLB

R823

GND

***

100

GND GND GND GND

470

C853

R821

Lin

470p

470p CH R819 100k C843

470p CH R818 100k C842

R816

100k C840

R815

R822

470

SAMUTE

1 2

Rin

C832

GND

Lin

R820

VKB1157JA801

Rin

GND GND

R814 1k

GND

470p

C838

470p

GND GND

C824 C825

from STB

Lout 470p CH C839

100

GND GND R813

10/10 10/10 YF (2125) YF (2125) 10/10 10/10 YF C826 (2125) C827 YB(3216) 10/10 10/10 C828 YB (3216) C829

470p CH C837

C836

R812

GND

0.1

Rout Rout

100

470

47k

R804

47k R805

470

(3216)

C823 (2125)

0.01

SAMUTE 1-D1

R811

22k

GND GND

C820 10/10

C817

330 470 470

R810 R807

R824

10/10 (2125) C816 0.1 YB

Lout YB

470p CH R817 100k C841

0.1 YB 10/10 (2125) C814 YF C815 YF

GND

R806

(3216)

22p

C811 10/16 10/16 C813

22p C818

C810

R801 R802 R803

GND 10/10 C819

Q802 E HN1C03FU(AB)-T

C807 44 1 AINIR MUTER 43 C808 10/16 2 AINIL AoutR3 10/16 42 3 EXTCTL1 AoutL3 41 4 EXTCTL2 MUTEL 40 5 Vout Aout1R 39 6 GNDA Aout1L 38 7 VIN1 GNDA 37 8 PWRSAV AIN5R 36 9 AMUTE AIN5L 10 35 AIN2R BLNK 11 34 AIN2L AIN4R C812 (3216) 12 33 REFFIL AIN4L 1/16 YB 32 13 VIN2 GND 31 14 V+12(Audio) Aout2R 30 15 AIN3R Aout2L 29 16 (Video)V+5 AIN3L 28 17 GNDA VIN5 27 18 VIN3 GND 26 19 EXTCTL3 Vout2 25 20 FUNC Vout1 24 21 SDA (CTL)V+5 22 23 SCLK VIN4

C809

3.9k

GND

IC801 LA73026AV-TBB

0.1

D802 3 D803 3 D804 3 D805 3 D806 3 D807 3 D808 3 D809 3

C R809

GND

D802–D809:DF3A5.6FU-TLB

47k R825

100/16

C801

1µ YF (2125) C802

R808

GND

1000/6.3

GND

220k

1 COM 2 GND 3 GND 4 GND

0.1

C872

27k

R847

47k B

GND

2 1

D831

GND

HN1C03FU C B2

VCC 8 ch0 7 ch1 6 A 5

RN4903(R1=R2=22kΩ)

C B2

VC E

GND

B C2

C B2

C873 220p

GND

B C2

R851 100k

DVR-530H-S 5

B C2

File : hec/DVR-05_PP/scrb_1 Last update=2005/01/12 P.C.B. file : /hec/v2009a1.pcpa

GND

AVLO XAVLTH

SN74AHC2G53HDCT-TRB C

R850

R848

220 Q812 2SC4081(QR)-TLB

100k

GND

2.2M

R849

D829 1SS355-TRB

R846

AVLIN

2.2µ/10 (2125)

R845

220p

0.1

C855 100/10

C871

C858

ch1 IC806

4.7k

2.2µ/10 C835

DAN217U-TLB D830

DAN217U-TLB

(2125) YB 2.2µ/10 C857 (2125)

Q811

GND

8 7 6 5 4 3 2 1

2SC4081(QR)-TLB

Rout GND

Bin GND Gin Mute Vcc Yin BIAS Rin

R844

GND Bout Gout Vcc Yout

Q810 2SC4081(QR)-TLB

9 10 11 12 13 14 15 16

ch0

2 1

V+5V

C856

0.1

GND

SN74AHC2G53 A ON

XTHROU FUNC BLANK

C874

IC805 MM1637XVBE-TBB

1µ

C854

V+5V GND

3.15 POWER SUPPLY UNIT A

POWER SUPPLY UNIT (VWR1392)

LIVE

NEUTRAL

E CAUTION : FOR CONTINUED PROTECTION AGAINST RISK OF FIRE. REPLACE ONLY WITH SAME TYPE NO. 491.400PF002 FOR P202 MFD, BY LITTELFUSE INC. CAUTION : FOR CONTINUED PROTECTION AGAINST RISK OF FIRE. REPLACE ONLY WITH SAME TYPE NO. 491.630PF002 FOR P301 MFD, BY LITTELFUSE INC. CAUTION : FOR CONTINUED PROTECTION AGAINST RISK OF FIRE. REPLACE ONLY WITH SAME TYPE NO. 49101.6PF002 FOR P401 and P402 MFD, BY LITTELFUSE INC.

J 42

DVR-530H-S 1

CN202

to HDD B

CN201

H 4/5 CN4501

J 43

DVR-530H-S 5

3.16 WAVE FORMS Note : The encircled numbers denote measuring point in the schematic diagram. A

B JACB ASSY Measurement condition ; No.1, No.16 to No.20 No.2 to No.15 No.21 No.33 No.23 1

: : : : :

CN401 - pin 1 (V4-IN) (Function : ) Tuner (9ch) V: 500mV/div. H: 10µsec/div.

100% Color-bar 100% Coloro-bar (AXP disc 1-23) 1kHz, 60% MOD 1kHz, 0dB, 2Vrms (48kHz/16bit)(AXP disc 1-1) 1kHz, 0dB, 1.9Vrms 6

IC501 - pin 23 (CbOUT) (Function : DVD play) V: 500mV/div. H: 10µsec/div.

CN402 pin 20 (Cb/BMtoT) (Function : DVD play) V: 500mV/div. H: 200µsec/div.

CN402 - pin 6 (V/YTtoM) (Function : LINE1 IN) V: 500mV/div. H: 10µsec/div.

GND

C518 + Side (YOUT1) (Function : DVD play) V: 500mV/div. H: 10µsec/div.

GND

IC501 - pin 21 (CrOUT) (Function : DVD play) V: 500mV/div. H: 10µsec/div.

CN402 - pin 18 (Cr/RMtoT) (Function : DVD play) V: 500mV/div. H: 10µsec/div.

CN402 - pin 8 (C/RTtoM) (Function : LINE1 IN) V: 500mV/div. H: 10µsec/div.

CN402 - pin 10 (GTtoM) (Function : LINE1 IN) V: 500mV/div. H: 10µsec/div.

CN402 - pin 12 (BTtoM) (Function : LINE1 IN) V: 500mV/div. H: 10µsec/div.

CN402 - pin 8 (C/RTtoM) (Function : LINE1 IN) V: 500mV/div. H: 10µsec/div.

C GND

GND

IC501 - pin 31 (COUT) (Function : DVD play) V: 500mV/div. H: 10µsec/div.

GND

CN404 - pin 18 (SC_YTtoS) (Function : DVD play) V: 500mV/div. H: 10µsec/div.

CN402 - pin 22 (Y/GMtoT) (Function : DVD play) V: 500mV/div. H: 10µsec/div.

D GND

GND

C517 + Side (CVBSOUT) (Function : DVD play) V: 500mV/div. H: 10µsec/div.

GND

CN104 - pin 16 (SC_CTtoS) (Function : DVD play) V: 500mV/div. H: 10µsec/div.

CN402 - pin20 (Cb/BMtoT) (Function : DVD play) V: 500mV/div. H: 10µsec/div.

E GND

GND

IC501 - pin 25 (YOUT2) (Function : DVD play) V: 500mV/div. H: 10µsec/div.

CN402 - pin 22 (Y/GMtoT) (Function : Tuner 9 ch) V: 500mV/div. H: 10µsec/div.

CN402 - pin 18 (Cr/RMtoT) (Function : Tuner 9 ch) V: 500mV/div. H: 10µsec/div.

GND

DVR-530H-S 1

A JACB ASSY

SCRB ASSY

Measurement condition ; No.6 to No.10 : 100% Color-bar No.1 to No.5 : 100% Coloro-bar (AXP disc 1-23) No.11 : 1kHz, 60% MOD No.12 : 1kHz, 0dB, 1.9Vrms 21

C152 - side (4L) (Function : Tuner (9ch)) V: 500mV/div. H: 200µsec/div.

IC801 pin 25 (V/Yout) (Function : DVD play) V: 500mV/div. H: 10µsec/div.

JA801 - pin 20 (V/Yin) (Function : LINE 1 IN) V: 200mV/div. H: 10µsec/div.

IC801 - pin 42 (Lout) (Function : DVD play) V: 1V/div. H: 200µsec/div.

B GND

GND

C8016 + side (LOUT) (Function : DVD PLAY) V: 2V/div. H: 200µsec/div.

GND

C868 – side (R/Cout) (Function : DVD play) V: 500mV/div. H: 10µsec/div.

GND

JA801 - pin 15 (R/Cin) (Function : LINE 1 IN) V: 200mV/div. H: 10µsec/div.

GND

JA801 - pin 6 (Lin) (Function : LINE 1 IN) V: 1V/div. H: 200µsec/div.

GND

C GND GND

CN402 - pin 4 (ALTtoM) (Function : LINE 1 IN) V: 1V/div. H: 200µsec/div.

C869 – side (Gout) (Function : DVD play) V: 500mV/div. H: 10µsec/div.

GND

JA801 - pin 11 (Gin) (Function : LINE 1 IN) V: 200mV/div. H: 10µsec/div.

GND

C870 – side (Bout) (Function : DVD play) V: 500mV/div. H: 10µsec/div.

JA801 - pin 7 (Bin) (Function : LINE 1 IN) V: 200mV/div. H: 10µsec/div.

GND

C868 – side (R/Cout) (Function : DVD play) V: 500mV/div. H: 10µsec/div.

JA801 - pin 15 (R/Cin) (Function : LINE 1 IN) V: 200mV/div. H: 10µsec/div.

GND

DVR-530H-S 5

H MAIN ASSY 1

CN2201 - pin 26 (CMtoT) (State : Stopped) V: 0.5V/div. H: 10µsec/div.

Foot of R3306 (VCO_VMCLK) (State : Stopped)

Foot of R3318 (VCO_33_36M) (State : Stopped)

V: 1V/div. H: 10nsec/div.

GND

CN2201 - pin 24 (YMtoT) (State : Stopped) V: 0.5V/div. H: 10µsec/div. V: 1V/div. H: 20nsec/div.

V: 1V/div. H: 20nsec/div.

C GND

CN2201 - pin 22 (Y/GMtoT) (State : Stopped) V: 0.5V/div. H: 10µsec/div.

GND

Foot of R3301 (VCO_AMCLK2) (State : Stopped)

GND

V: 1V/div. H: 10nsec/div.

Foot of R3322 (VCO_AMCLK1) (State : Stopped)

Foot of R3108 (LCHIN) (State : Stopped) V: 1V/div. H: 200µsec/div.

V: 1V/div. H: 10nsec/div.

D GND

GND

CN2201 - pin 20 (Cb/BMtoT) (State : Stopped) V: 0.5V/div. H: 10µsec/div.

Foot of R3109 (RCHIN) (State : Stopped) V: 1V/div. H: 200µsec/div.

V: 1V/div. H: 20nsec/div.

E GND

GND

CN2201 - pin 18 (Cr/RMtoT) (State : Stopped) V: 0.5V/div. H: 10µsec/div.

GND

Foot of R3305 (VCO_18M) (State : Stopped) V: 1V/div. H: 20nsec/div.

GND

Foot of R3106 (AD_LRCKI) (State : Stopped) V: 1V/div. H: 10µsec/div.

GND

DVR-530H-S 1

H MAIN ASSY 15

Foot of R3104 (AD_BCKI) (State : Stopped) V: 1V/div. H: 100nsec/div.

Foot of R3228 (DA_ADATAO) (State : Stopped)

IC3202 - pin 1 (RCHOUT) (State : Stopped) V: 2V/div. H: 200µsec/div.

V: 1V/div. H: 200nsec/div.

GND

Foot of R3107 (AD_ADATAI) (State : Stopped) V: 1V/div. H: 500nsec/div.

GND

IC3201 - pin 16 (DA_33_36M) (State : Stopped)

V: 1V/div. H: 10nsec/div.

V: 1V/div. H: 500nsec/div.

C GND

Foot of R3227 (DA_BCKO) (State : Stopped)

GND

Foot of R3230 (DA_LRCKO) (State : Stopped)

V: 1V/div. H: 10µsec/div.

V: 1V/div. H: 100nsec/div.

V: 1V/div. H: 20nsec/div.

D GND

GND

Foot of C4290 (CVBSIN) (State : Stopped) V: 0.5V/div. H: 10µsec/div.

V: 1V/div. H: 5µsec/div.

V: 1V/div. H: 200nsec/div.

E GND

GND

IC3202 - pin 7 (LCHOUT) (State : Stopped) V: 2V/div. H: 200µsec/div.

Foot of C4278 (CCRIN) (State : Stopped) V: 0.5V/div. H: 10µsec/div.

GND

DVR-530H-S 5

4. PCB CONNECTION DIAGRAM A

NOTE FOR PCB DIAGRAMS : 1. Part numbers in PCB diagrams match those in the schematic diagrams. 2. A comparison between the main parts of PCB and schematic diagrams is shown below. Symbol In PCB Diagrams

Symbol In Schematic Diagrams B C E B C E

Connector

Capacitor

Transistor

B C E B

Part Name

3. The parts mounted on this PCB include all necessary parts for several destinations. For further information for respective destinations, be sure to check with the schematic diagram. 4. View point of PCB diagrams.

E B

SIDE A

E Transistor with resistor

B C E D

G S D

G S Field effect transistor

D G S

P.C.Board

Chip Part

SIDE B

Resistor array

3-terminal regulator

DVR-530H-S 1

4.1 TUNB ASSY SIDE A

SIDE A A

5/5

C934

VNP2005-A

TUNB ASS'Y

C933

CMKD-P3X

A TUNB ASSY

W101 W109

GND

KN301

C935 W110 GND W111 SIF W112 GND W102 DVSUP X901

C936 STATCHG

VWV2105

DVSUP

VWV

W113

ICT 11

W103

XRST1

W105

GND

C939

VWV2106

C937

W104

W114 C941

C938 W115 C940

D W116

GND

C315

W117 ROUT

W106 GND

W118 V+31V

W119

1.STATCHG 2.I_BG 3.XRST1 5.V+31V 7.V+6TU

W107 9.V+6SW 10.ROUT 12.LOUT

W122 GND W121 AGC

CN301

C314

1 1

4.6.8.11.13.15.17.20.GND

CN404

C310

CN301

MB(5V)

GND

W120

V+6TU

C316 14.UVOUT

AGC

16.AGC 18.SDA

W108 W125 SCL W124 SDA

21 21

19.SCL 21.V+6BB

U301

BB(5V)

W123

W150 or L303

C313

(VNP2005-A)

A 49

DVR-530H-S 5

SIDE B

D901

R901

R918 C924 R919

Q905

C923 C925 C903 C902 R917 Q903 C916

L903

L901

GND

C904

VWV2106

L902 C909 R931 GND

VWV2105 LF DVSUP

R928

SIF

R908

R929

C901 R933

R927 Q906

GND

DVSUP

C907 R905 STATCHG

C930

C908 C906

C915

R923 R907

R926 R925

R361

C931

C929

R354

IC901

R355 C905

R921 R922 C926 R920 C922

B Q904 C928 C927

A TUNB ASSY

23 XRST1

C917

R356

R924

C919 GND

R910

R362

VWV

C918

GND

R909 ROUT GND

V+31V

L904

MB(5V)

1 Q302 L302

1.STATCHG 2.I_BG 3.XRST1

5.V+31V V+6TU

AGC

R302 R304 R308

7.V+6TU 9.V+6SW

AGC

21 BB(5V)

10.ROUT 12.LOUT 14.UVOUT 16.AGC 18.SDA 19.SCL 21.V+6BB

Q903 Q301 Q906 Q302 Q905

R303

C304

C301 C302

SDA

R352

4.6.8.11.13.15.17.20.GND

GND

C303

SCL

R902

R307 R357

R351

GND

Q301 R305

CN301

C306 L305 L306 C307

C308 L307 R306

R301

R358

L301

(VNP2005-B) Q904 IC901

DVR-530H-S 1

DVR-530H-S 5

4.2 JACB, FLJB, DVJB and ATAB ASSYS SIDE A A

A CN101

CN403

ATAB ASSY

CN11 CN12 (VNP2002-D)

CN302

H CN3802 to HDD

G D

CN1201

CN301

D DVJB ASSY

C FLJB ASSY

CN101 CN601 E

(VNP2002-D)

H B CN5601

B C D E 52

DVR-530H-S 1

(VNP20

SIDE A A

C CN301

B JACB ASSY

CN101 B

Lithium Battery

(VNP2002-D)

CN402

CN401

H B

CN2201

CN3001 E

B C 53

DVR-530H-S 5

1 1

(VNP2002-D)

2 27

CN401

3 V+6E

C424

R334

B C

DVR-530H-S

R404

27 R331

C331

49 C303

R329 Q307 C330

C525 R533

R528 C526

C527 R534

C142

D408

D409

R195

R208

C175 C502

R191 R213 C143

C141

R196

R565

R209

R314

D405

R461

C443 D406

C441 3Y

D304

C134 R210

3C R536

D305

C440 R211

D410

C133

R212

R197

R202

C144

R198

R504

R503

R319

R106 D411

R201

R190 C135

R204

11 33 3V

C334

C458

V R423 +5V

R432

R228

C464

V+5VSEL

C460 Q412

R229

C328

C335

C457

D414

C138

R158

C137

R207 C145

IC502

R312

C417

C147

R193

3R 3L

R327

Q404 V+5VI

R407

Q403

C146 R192

R183

R505

C501

R221 R502 R220

D114

R109

Q107 L103

C332 R333

C419

R406

D103

D111

C130 R214

D108

Q115 V+5V

D116

Q112

R405 CVBS_GR /BTtoM

R408

D112 V+6SW

R562

C171

R140 R215 C132

R138

C163 R219

R175 D105

C164 R186

IC103 C182

C418

R457

Q405

R233

R144 R234 C126 R162

Q113

R133

R146

R148 R147 R139

R102 C170

R119 C177

C136

NP C412 R411 D506

Q103

D113

R124

C140

R128 R129

V+5M

V+6E

Q105

R123 R150

R120

D107 R235 C410 C411 Q104

Q405 Q306 Q307 Q103 C112

C114

R187

R112 R116 C108

C176

GND

R440 C101

R184

C165 C166 D101 R185 C107 R107

GNDA ARMtoT GNDA ALMtoT GNDA Cr/RMtoT GND Cb/BMtoT GND Y/GMtoT GND YMtoT GND CM toT

Q105 C113 V+5M

R540

D R156 R145 R152 R153 R154 C117 C118

Q402

C162 R161

Q308 R101 D102

C105

1 R110

GND ARTtoM GND ALTtoM GND V/YTtoM GND C/RTtoM GND GND/GTtoM GND

Q104 L101

Q403 Q113

V+13SW

Q412 Q115

V+5M R142

Q404

C427 C425

IC301 Q406 C103

C408 C178 C409

V+5F

C Q501

RXDGL GND B_IR BUP SPDIF GND ASCK GND HSTtoM XRST1 SSTtoM P_CONT SSMtoT MRST HSMtoT XRST2 V+6SW AMUTE V+6E GND V+13E GND V+32E GND V+13 SW X525P

Q503 Q112 55 44

TXDGL

IC103 Q107 Q502

Q414

IC502 Q

1 4

SIDE B

B JACB ASSY

1C R1 GNDA

1Y L2

R566 R563 R56

R420

R330

CN402

C FLJB ASSY

R331

C331 R318

R330 R325

5 C305 R305 R304

FLJB ASSY 9

R328 2Y GND

C414 GND

GND

R336

SDET2 2C 27

CN301

C471

GND GND V+6SW

V+31V

V+5TU

1 40

ASPI/P

GND

RST1

(VNP2002-D)

C316 R337 C325

1 C326

GND

R558

C470

(HDD)

SCL

CN12

R565

R518

D415 C472

Q414 1 J_CLOCK /V+6BB

CN401

AGC

R445 R444

R519

I_BG

D403

R515

R516

R517

R521

Cb/Pb

C473

Cr/Pr

C415

L401

R402

C421

C423

R513

GND

RESET

V+6E C404 Q402

Q406

C514

Cb/Pb

V+32E R511

V+5VO

18.2R 20.2L 22.2V 24.2Y 26.2C 11,13,15, 17,19,21, 23,25,27 GND

R506 R409

E B C2 C422

C B2 E2 R539

R522

R307

C304

Q503

C306

Cr/Pr

C307 R306

Q502 R520 Y

1.KEY1 2.LED_HDD 3.KEY2 4.LED_DVD 5.KEY3 6.IR 7.FLSTB 8.FLCLK 9.FLDATA 10.FLPON 12.SDET2 14.V+5F 16.V+13E

41 R512

R509

1 1

Y1 R510

R523

IC 30 1

R529

R514

R526

R532

C308

Q501

R535

C333

C522 R524 C523 R525 R530 R531

LF C2

R321 D303 D301 D302

0 1 2 3 4 5 6 7 8 9

R560 R557

C309 Q308

0 1 2 3 4 5 6 7 8 9 C1

Q306 R317 R320

R315

R309 R308 R311 R310

0 1 2 3 4 5 6 7 8 9 V2

C327 R324 D311

C336

VWV2

R527 C524 L1

C321 C314 R316 C320

D310

R566 R563

D312

D306

C525 R533 L2

Q307 C330 R314

R528 C526

C527 R534

44 44

R329 D304

C303

D305

R319

C335

23 23

C334

R536 GNDA

33 33 34 4 3

C328

5 8

SIDE B A

ATAB ASSY

GND SDA

GND GND

STATCHG 21

C301

C318 LF

C312

1.V+13E 2.LED_DVD 3.LED_HDD

C317

4.KEY1 5.KEY2 6.KEY3 7.GND 8.V+5FL

(VNP2002-D) LF

D DVJB ASSY

(VNP2002-D) E

B C D E

DVR-530H-S

4.3 PSWB and RSWB ASSYS SIDE A A

CN101

PSWB ASSY

F 56

DVR-530H-S 1

SIDE A A

RSWB ASSY CN1201

C CN302

CN1202

(VNP2007-A)

F G 57

DVR-530H-S 5

SIDE B A

RSWB ASSY

CN1201

CN1202

(VNP2007-A)

PSWP ASSY

F G 58

DVR-530H-S 1

SIDE B A

CN101

(VNP2007-A)

F 59

DVR-530H-S 5

4.4 MAIN ASSY SIDE A

H MAIN ASSY

C4513

IC4505

C4510

F4401

X4281

R4362 C4223 R4364 TP4371

C4229 C4228

C4224

IC4281 C4273 R4281 R4285 C4227

Q4401 TP4004

R4204

C4282 C4281

F4281 C4283 C4296

Q4402

R4212 R4205C4230 C4235 R4404 R4405 C4403

C4258 C4257

R4220 C4203 C4232

R4214

R4250

C4233 R4209

R4215 C4245

R4206

R4216 Q4202 R4210 R4219 C4243 Q4203

R4217

R4202 R4203 R4213

R4352 R4354 R4284 2 8 2 8 R4248 1 71 7

R4283 C4204 4 C4244 C4259 F4282 C4260 C4261 IC4282C4291 C4286 1 C4288 3 C4262 C4275 C4263 C4290 C4264 C4265 C4250 C4266 C4249 C4205 C4206 R4225 R4226 R4227 C4268 45 C4207C4208 F4231 2 82 8 R4241 R4242 1 71 7 C4239 5

IC4201

C4284 C4297

CN3001

C4512 C4511 D4503 5 4 IC4505 3 1

C4246 R4218

C4601

R4610

CN401

CN3001

IC4282 IC4201

R4207

L4201

TP4601

C4241

R4608

F4601

Q4203

R4201 R4249

Q4202

R4232 C4240 C4202

C4201 L4203

R4403 R4401

R4406 R4402

Q4602

R4609 C4603

CN3001

Q4201

C4236R4208 C4231

R4607

Q4602

IC5101

Q4204

C4602

L4402 C4405

Q4201

R4408

C4237 R4211

IC3203

zf2

C3219

Q4401

IC4281

C4404

R4221 C4248 C4272 C4226 C4225

TP3747 TP3732

zz3

Q4402 Q4204

CN4501

C4406 C4401 R4407

176

TP3729

C4402

IC3203 IC5621

CN5601 CN4501

TP3746 TP3745

CN4501

CN201

R4243C4209 R4244R4275 R4246C4299 C4251C4267 C4252C4269 C4253C4278

R4233R4234 R4235R4236

R1008

L1006

C1201

C1212

Q4501

C4298 R4247 TP1008TP1009

TP1006TP1007TP10

C4504

C1052

C1331

4 IC4511 R4538 3C4524 1 5

C1301 C1302

R3804 R3803 R380

R3813 R3812 R3811

CN3801

zz2

CN3801

DRIVE ASSY R9R

DRIVE AS

DVR-530H-S 2

R3805

R3823 R3821 R3820 R3818 R3817 R3816 R3814

R3807

C3108 C3107

R3862 R3824 C3801

CN4502

R1461

C1008 C1242

C3114 C3105 C3102

IC3101

R3113

R3806

R3861 CN4502

C4523 R4537

Q2201

C3111 R3109 C3112

D3102

D3101 R3110 R3112

C1241

R2215 D3104 D3103 R3206

R4536

F3102

C3215

C1059

C1061

Q2204 Q2203 Q2202

R2214 R2213 CN2201

CN2201

TP3751

R3116

TP3754 TP3758

IC3102 R3105 R3107 R3114 C4561 R3104 C4562

40 2 8

TP3753 TP3752

R3117

2 8 R1458 1 7

C1060

2 8

R3106 R3102

C1006

2 82 82 8

CN3801

R3101

CN4502

C3101 C3104 10

IC3101 IC3102 IC3302 IC3304

R3108

C3113

C3103 C3106

F3101

C2201R2201

21 8 7

IC4504 IC3301 IC4511

C1328

CN402

R2203

CN2201

C105

C1 R1419 R1418 R1420 C1 R1417 R1416 R1414 R1413 R1412

C1215

Q2201

C2203R2205

R2210 R2204 C2202 R2209 R2202

IC3706 IC4512 IC3303

Q2202

C1005

21 8 721 8 721 8 7

R2211 R2206

Q2203

IC3707

CN3802

C2204 R2207

R2212 R2208

Q2204

TP1001 R1503 R1501

R1502

C1330 C1231

VR1001

C4537

R1504

VR1002

TP1005TP1004

C4506

R4501 C4505

Q4501

C4254 C4285C4279 C4255C4270 C4256C4271 R4237C4292C4210 R4238C4293

C4536

IC4509

C3301 D4508 C4518 C4519

F3304

C3308 C3307

CN3801

6 R3851

C4517

R3841

R1907 C1902

C4520

C1001 C1003

C1026

L1008

TP1920

TP5525

IC4512 R3848

R3842 R3843 R3844 R3845 R3847 R3849 R3850

R4539 CN3802

R3840 R3839 R3838 R3837

R4533

C4532

R4532

IC4509

R4534

L1004

R1005

C4254 C4285C4279 C4255C4270 C4256C4271 R4237C4292C4210 C1052 R4238C4293 R4239C4294 C1034 R4240C4295C4211 C4212 C1035 C1513 C1514 C1040 C1036 R1032 R1084 R1091R1093 R1092 R1031 R1090R1086R1085

R4244R4275 R4246C4299 C4251C4267 C4252C4269 C4253C4278

R4253 R4252

132

R5735 R5130 R5138 R5139

C5104 R5131R5127 R5136

C4220

TP4374

R5128

C5124

R3836 R3835

X5101

R5125 R5126

C5701

R5103

X4281

C5615 L5605 C5608C5616 L5606 C5606C5614 L5603 C5605C5613 L5602

C5622

IC5621

C5621

L5601

L5604

L5607

C4282 C4281

R5608 TP5338 C5607 C5105

R5105 R5106

C5102 C5114 C5112 F5101 C5111 R5104 L5107

R5107

L5108 C5103 TP5101

R4362 C4223 R4364 TP4371

C4224

R4221 C4248 C4272 C4226 C4225

R4228 C4222 TP4372 C4274

TP4375 TP4201 R4360 R4358 R4356

R5733 2 8

IC4201

133 TP4373

2 8 6 12 8

TP4512 5 C4508

1 C4509

C1009

R1038 R1039

VR1002

R1504

VR1001

TP1919

D4502

C3312 R3314 R3315 TP4525

C3309

IC3303

C1059

R1502

C1018 C1017 C1025 C1016 C1015

C1021 C1020 C1019

C3318

VC3301

C3304 C3303

C1011 R3713 R3714 R3115 R3111 R3301 C3737 C3738 R3306 TP3301 5 C1007 4

C1031

C1061

R1010

zf1

R3304R3303 X3301

R1463

R1459C1053 R1468 R1465 R1464 R1462 C1055 R1469

R3313

zz1

R3321R3320 IC3301

F3305

C3305

R1466 R1467 R1470

R1461 R1460

C1008

IC3707

C3314

F3303

R3319 R3302 1 R3308 3 R3307 R3305 R3318

IC3304

4 R3322

C1331

R3310 C3311 R3311 R3312R3316 R3317 C3317 C3306

TP3749 TP3737

IC3302

TP3739

TP3738 TP3743

R1905

C1301 C1302

C4523 R4537

4 IC4511 R4538 3C4524 1

2 8

21 8 721 8 721 8 721 8 7

R3808 R1901 TP1908 R1903 R1904 R1902 R1329R1322

2 82 82 82 8

38 R3820 R3818 R3817 R3816 R3814

C3310 R3309

CN3802

CN1901 C1002 R1908

C3315 C3316 IC5101

C1901 C4548

7 1 R5607

2 8

2 8 2 8 R1326 R1325 1 71 7

2 8 2 8 R1451 R1454 1 7 1 7 1

C5618C5617 C5610C5609

2 82 8 R1453 R1452 1 71 7 C5110

CN3801 IC3706

C5624

2 82 82 82 8

C1004 7

R3804 R3803 R3802 R3801 R4230

R3813 R3812 R3811 R3810 R5734

R1419 R1418 R1420 C1057 R1417 R1416 2 8 R1414 R1413 R1457 R1412 1 27 8 R1455 2 82 8 1 7 R1458 R1456 C1060 1 71 7 C1012 C1010 71

C1056

C1062

C1027 C1028 C4545 C1029 L1005 C1030 R1006 C1033 C1032

C1005 R4531

C5623

C1051 C1013

20 1

R1009

C1022 C1023R1067

C1024 48

C1501 7

C4298 R4247 TP1008TP1009 R5112 C5113 C5118 C5119 R5123 C5123 R5124 R5132 TP5106 R5137 64

L1007 R4224 49

C1502 2 8 2 82 8

C1006 7

TP1001 R1503 R1501 71

TP1005TP1004 2 82 8

TP1006TP1007TP1020 R4373 R4374 R4251 R4365

C4215 R4231 C4214 C4213 R4229 C4221

C4216 C4276

C4218 C4217

C4219

88 R4372

R3805 R4371

2 8

R4536 D5621

TP3741 TP3757

TP3742

TP3744 4TP3750

CN5601

R4352 R4354 R4284 2 8 2 8 R4248 1 71 7

CN4501

5 6 7

SIDE A A

CN601

CN5601 1

R5109 R5116 R5110 C5101 R5120C5121 R5122 C5120

R5108

C5122

C5125 R5737 C5127 1 7 1 7 C5126 R5133 R5134 R5736

D4505

C4533

E D

CN12

IC4504 4

C4507 3

C3302

C4534

(VNP2001-D)

DRIVE ASSY R9R

DVR-530H-S

2 8 2

7 1

8 2

7 1 7 1

1 8 2 2

7 1 8 2 7 8

8 2 8 7

TP1066 2

R1428 8 2

C4574

8 2 7 1

8 7

R1409 R1408 R1407 R1406 R1405 R1404 1

2 1

8 2 7 1

C1203

R1403 R1402 R1401 C1063 C1050 C1058

R1318 R1319

R1323 R1330 C1311

C1308

R1216 R1218 C1329 C1321

TP1091

8 2

8 1

7 1

TP1301

TP3858 TP3854 TP3810 TP3856 TP3852 TP3857 TP3853

7 1

R3855 R3854 R3853

2TP3809 8 2 TP3855 8 2 8 TP3851

TP1056

TP1054

TP1083

TP1087 C1304 C1303 TP1088 R1082 R1089 TP1051 TP1918 R1088 R1035 R1083 TP1916 TP1029 R1056 TP1017 R1057 R1065 TP1042 R1070

C1306

IC10

R3857 R3856

TP3814

TP4515

7 1

R1411 R1410 1

8 7

1 5

3 4

C4573

7 1

1 8

C4004 TP1914 TP1030 TP1915 R1060 TP1060 R1061 TP1032 TP1909

2 1

R3833

C4553 C4576

8 7

TP4507

C4575 D4571 D4506 C4572 R4571R4572 7

2 1

R3832

C1315

C1313

TP1902

TP1904

TP1903

TP3720 TP3719

TP3716

TP3717 TP3728

TP1905

TP1906

TP1901

TP3530

R3815 R38

R3809

TP4508

D4572

IC4506

TP4505 C4571

7 1

TP1085 TP1082 66

TP4509 C4555 C4556 R4514 IC4571

R1062 R1063 R1058 R1064 R1068 R1059 R1094 R1079 R1095 R1048 R1078 R1052 R1071

R1081 TP1018 R1127 C1115 29

7 1

R4513

TP1041 TP1039

TP1033

C4515 C4546 TP1912TP1040 TP1010

C1104 56

7 1

D4507

L1102

IC1105

R3828 R3829 R3830 R3831

TP1015 R1053 2 8 TP1080 TP1044TP1043 TP1014 TP1074 R1054 TP1078 TP1077 C5507 TP1047 2 8 2 8 2 8 2 8 1 7 C5508

IC1301 CN3808

C4558 TP4520

C5722

C1108

IC1102

C1320

TP1062 2

TP4522

TP4521

C5721 X5701

R5721 R5725 C5702 C5723

IC5701

R14 C3802 TP3526 TP3528

TP1086 TP1090

R1066

C1307 C1309

C1305

C1064 C1312 C1314 R1324 R1328

8 2 8 2

R1327

TP1089

C4559 C4560

TP3723

R5606 R5605

C5712 C5713 R5609R5727 C5619

R3846

R3834 R3827 R3852

zf3

TP3722 TP3731

TP3733 TP3724 TP5527 TP5526 C5620

CN5301

DVR-530H-S

TP5520

TP1050

TP4518 TP1013 TP1052

TP3811 TP3812

TP1053 TP1081

IC3201 IC3202

TP4524TP1048

R1040 R1087 R3858 TP3815

IC1001 R1036R1037 R1033R1034

IC1001

TP1917 TP100 TP1084

Q3201

TP1049

IC1301

TP1072 TP1075 TP1073 TP1071

IC1221

TP3813 IC1011

TP1079 TP1076

TP3496 TP3497 TP3499 TP3498 TP3500 TP3501 TP3502 TP3504 TP3503 TP3506 TP3508 TP3505 TP3510 TP3512 TP3509 TP3507 TP3514 TP3511 TP3515 TP3520 TP3513 TP3521 TP3522 TP3523 TP3524 TP3525 TP3527 TP3529

TP5522

R3826

D3802 IC1201

R2503 R2502

R1013 R1012 R1011 C5506 R1014 R1075 TP1045TP1046 R5507 R1055 R5508 R5509

Q2501

R1042 R1044 R1080 R1074 TP5337

TP1037

TP1061

TP5336

TP5335

D4504 TP4514 C4516

R2515 TP1027 R2514 TP1026 R2512 R2511 Q2504 Q2502

C1113 IC1102

IC5631

IC4506 IC3002

R1047 R1045 R1043 R1051 R1046 TP1024

R4535 IC4503

C5512 TP5521

R5603 R5604 R5602 R5601

TP1035

C5711

C4514 C1105 TP1019 TP1038 TP1023 R1106 R1107 R1108 R1118 R1113 R1110 C1114 R1112 R1111 R1109 Q2505 Q2503

TP5518 TP5519

IC1101

TP1022 IC3001

R1104 R1103 R1128 IC1101

R5724 R5711 R5728 R5723 R5719 R5720 TP1036 IC4571

R5722 R5726 R5730 R5732 R5731

IC4507 IC3401 IC5631

C4525

C4557

C4554 TP4517 C4527

C4526 R5715 R5716 R5717 R5718

R5610

7 7 1

L5701 8 8 2 8 2 8 2 2

TP4511 TP4510 TP5529 TP5517

7 1 7 1 1

R5714 Q3001 IC4001

Q IC

SIDE B

R5729 C5715 C5714 R5712 R5713 IC5701

H MAIN ASSY A

4 3 2 1

SIDE B A

108

TP3401 16

IC3401

TP3009

37 1

8 2

C3005 C3006

4 51

7 8

L4004

7 1

C4501

TP3017

C3007

TP3014

C1239 C1234 C1214 R1257

TP4503

R1423 R1427

8 2 8 2 8 2

R1244 1

C1220

R1249

C1211

TP2002

7 R1258 C1240

TP2008

C1228

C1233 C1213 R1247

TP2001 TP2042

R3218

8 2

7 1

TP2041 TP2011

8 2

7 1

C3216

IC1201

TP2014

TP2026 TP2009 TP2016

R3220

R3219

TP3702 TP3706

TP3703

C3211 R3226

R3825 C3212

TP2015

TP3707 TP3704

R3223 R3224 C3210 TP3201

R3225

R3815 R3819 R3822

R3201

TP3530

D3801

TP2013

C3206

C3218

C3202 C3217

C3204

C1315

R3208 R3212 R3221 C3214

Q3201

R3202

R3229 16 9 R3231 R3232 R3230 IC3201 R3228 R3227

R3205

C3205 C3203

R3213

C1209

R1248

R3210

R1243

C1208

R1241

R1245 C1207

C1202

R1216 R1218

TP2012

R2525 TP2524 R2524 R3214 TP2523 R3216 C3209 R3215 R2523 R3207 TP2521 C3208 R3209 C3207 R2521 TP2522 R2522 TP2525 R3211 IC3202 R3222

C2010 C2009 C2008 C2007 C2005 R3217

C1206 C1203

R1403 R1402 R1401

R1242

1 2

R1246 C1210

7 8

R1253 C1205

8 2

7 1

1 2

R1219 R1217 C1227 R1255 C1226

8 2

7 1

C1204 C1221 C1225 R1422 R1421 C1222 R1426 R1425

7 1

R1251

7 1

TP2004

33 2

R1409 R1408 R1407 R1406 R1405 R1404

R3203 R3233

C1313

R3015 C3004

C2101

C1230

C1329 C1321

IC1011 1

TP3006R3011 C3003 TP3007

IC1221

TP4518

R1259 R1256

C1223

R1254

R3026 R3001 R3007 R3008

C2501 R2501

8 2

7 1

C1224 R1424 C1229 R1428

R1411 R1410

C1063 C1050 C1058 C1064 C1312

R1252

TP3004

TP3019

R1415

D4501 C4502 R4522 TP4502

L2101

C2502 R2504

TP2501 Q2501

R2503 R2502

IC4503

C2504 R2510

TP2502 R2506 Q2502 R2505

R3003 R3002

C3008

C2503 R2507

C2505 R2513

R1062 R1063 R1058 R1064 R1068 R1059 R1094

TP2503 R2509 Q2503 R2508

C4503

C3001

TP1915 R1060 TP1060 R1061 TP1032 TP1909

TP1062

TP3003

R3009 IC3002

TP1065

TP1911

TP1066

TP1914

TP1030

C4029

IC3001

R3016

R3014 R3013 R3012 R3006 R3005 C3002 R3004 R3017

R4029

C4014

TP3001 TP3018 TP4513 TP3012 TP3008 TP3010 TP3013 TP3011 TP3005 R3010 R3204 TP3015 TP3016

TP3022

R4007 R4008

C4001

TP2505 R2515 Q2505 TP1027 R2514 TP1026 TP2504 R2512 Q2504 R2511

TP1061

R3809

C3401

C4013 C4012 R4010 R4009

R4012

R4006 TP4005

C4514

C4016 R4011

D3001 TP3020 TP3002

144

TP4516

C4574

C4576

D4571 D4506 C4572 R4571 R4572 7

TP4515

R3402

C3404

R3405 R3404

C4573

C4575

D4572

C4006 R4003 C4007 C4010 C4008 C4009 C4011 C4015

R3023 R3025 R3022 R3021

C4005

TP3026 R3024

IC4001

TP3709

zf4

C4004

C4571

TP4006 C4003 R4001 R4002

R4013TP4002 R4014 R4015 R4016 R3028 C4017 Q3001 R4017 C4019 R3027 R3030 C4018 R3029 R3019 TP3021

R3406 R3407

24 R3403

TP3727 TP3712

R3401

TP4007

TP3714 TP3710

C4028

C4027

R4020 C4024 R4019 C4023 C4025 R4021 C4026

TP4003 C4022 TP4001

C3402 C3403 X3401

C4551

C4552

C4553

C4554

109

TP4506

TP4507

TP4508

C4556

TP4509 C4555

TP4505

TP4522

(VNP2001-D) F

H 63

DVR-530H-S 5

Q703

C709 C762 R762

IC806 IC704 IC801 IC802 IC805

C706

C703

5 C818

C815

C816

C812

R722 C710

SCRB LF VWV2101

R828

VNP2009-A

CN702

R827

CN701

Q803 C702

C722

Q804

C869

C802 27

C834

Q805

R833

C718

C867

VWV

C833

IC804

C865

C857

C754

C856

R752 R751 Q712

C756

R754

L706

IC805

C854

Q705

C721

R743

C726

C874

D831

C731

R859

Q807

C727

R728

C728 C723

Q702

Q701

R727 D702 D701

L707

L709

L708

ICT

IC704 R701

1/5

CN703

1 CONTACT SIDE

R702

KN801

CMKY-M1X

R842

Q815

Q814

Q816

R835

R858

C838 R811 D805 R807 R805 B

C716

C801

R803 C817 IC801

C870

R854

C808

R821 R825

R823

5 R710

44 66

C863 C862 C866

C864 C859

C860 C835

IC702 R760

D816 C868

R809 Q802 D R830 R831 D814 D810

IC803

Q801

R829 R808

D811

C861

44 66

22 22

D802

D 33

11 C811

C805

C830

IC802

19 19

23 23

D815 D817

C853 D813

4 4

IC703

C720

D825

R855 C807 C810

C844

C828 D803

R801

C804

JA801

AV2

C858

IC701 1

C845

R720

R853 R763 4

C C806

R822 R820 R824

D818

C847 R813 D807 C841 R817 C875 C824 D822 44 44

Q813

C711 11

R757

C820 Q714

D826

C719

D828

16 16

A C836 R810 36 R806 R804 36 C819 R716

C837

JA701

CN702

C839 D804 R832

C725

C850

R862

R843

CN701

AV1

C855

R852

64 C738 C737

Q704

JA802

D830

11 IC806

E VA701

I Q703 VA703

D 5

Q712

IC703 C730

R730

4 8

F Q704

3 7

B VA702

SCRB ASSY 1

C734 C733 D704

I 5 4

A 1 3

1 3

4.5 SCRB ASSY SIDE A SIDE A

C724

R860

L705 C755 C758 C759 C757 R753

C760 R750

C746 C736

D801

CN105

C827

R802

CN104

C707 C701

44 R726 C717

(VNP2009-A)

Q805 Q702 Q815 Q804 Q705 Q816 Q802 Q701 Q714 Q801 Q807 Q712 Q813 Q814 Q803

IC702 IC703 IC804

IC803 IC701

DVR-530H-S

SIDE B

SIDE B A

C752 C749 C748 C751 C750 R745 L704 C753 R744 C873 R836 R851 R850

SCRB ASSY

L701 C742

C744

C741 C740 R737

C743 C745

5.USB_DP1 3.USB_DM1 2.4.6.7.8.GND 1.USB_VFB CN703

L703 A

R837 Q806 R834

Q810 R845 R844 C872

Q812 Q811

D829 R848 R849 R846 C871

R847

B L702

R736 R735

Q708

R734

R738

C739

R740 R741 R746

C747 R742

C851 R838

Q707 Q710

Q809

R739

R840 C852

R731

D812

Q808

R732

C735

R841 R839 C829

R826

12.NC 11.Gin 10.N-LINK 9.GND 8.FUNCTION 7.Bin 6.Lin 5.GND 4.GND 3.Lout 2.Rin 1.Rout

JA801 D809

TO JACB

7.XP_SAVE 8.GND 9.SAMUTE 10.FUNC 11.GND 12.AL_StoT 13.GND 14.AR_StoT 15.GND 16.SC_BStoT 17.GND 18.SC_GStoT 19.GND 20.SC_RStoT 21.GND 22.SC_CStoT 23.GND 24.XAVLTH 25.GND 26.SCL 27.SDA

CN701

AV2

1.V+13E 2.GND 3.V+5V 4.GND 5.AVLIN 6.AVLOUT

21.GND 20.V/Yin 19.V/Yout 18.GND 17.GND 16.BLANK 15.R/Cin 14.GND 13.GND

C849

R815 C843 R819

C826 1

D808 C848

VWV2101

C814

C813 C809

C825 C832 R856 D823

D824

R857 21 20

CN702

1.SC_V/Y_StoT 2.GND 3.GND 4.SC_RTtoS 5.GND 6.SC_BTtoS 7.GND 8.SC_GTtoS 9.GND 10.SC_YTtoS 11.GND 12.SC_CTtoS 13.GND 14.AL_TtoS 15.GND 16.AR_TtoS 17.XTHROU 18.GND 19.TUCVBS_TtoS 20.GND 21.BLANK 22.GND 23.TUAR_TtoS 24.GND 25.TUAL_TtoS

R814 C842 R818

AV1 JA802

TO JACB

26.GND 27.V+6E

C761 Q713 R761

R725 R719

R759

21.GND 20.V/Yin 19.V/Yout 18.GND 17.GND 16.BLANK 15.R/Cout 14.GND 13.GND 12.NC 11.Gout 10.N-LINK

9.GND 8.FUNCTION 7.Bout 6.Lin 5.GND 4.GND 3.Lout 2.Rin 1.Rout

C715 2

C714

R758 C823 1

R724 R718 R816 R755

C846 D806

C713

R721 C840 C712

R756 R715 R723 R717

R812

(VNP2009-A) F

I 65

DVR-530H-S 5

4.6 POWER SUPPLY UNIT SIDE A

SIDE A

POWER SUPPLY UNIT

H CN4501

CN201

CN202 F

to HDD

J 66

DVR-530H-S 1

SIDE B

SIDE B A

POWER SUPPLY UNIT

J 67

DVR-530H-S 5

5. PCB PARTS LIST NOTES: A

Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List. The mark found on some component parts indicates the importance of the safety factor of the part. Therefore, when replacing, be sure to use parts of identical designation. When ordering resistors, first convert resistance values into code form as shown in the following examples. Ex.1 When there are 2 effective digits (any digit apart from 0), such as 560 ohm and 47k ohm (tolerance is shown by J=5%, and K=10%). 560 Ω 56 x 10 1 RD1/4PU 5 6 1 J 561 47k Ω RD1/4PU 4 7 3 J 47 x 10 3 473 0.5 Ω RN2H R 5 0 K R50 1Ω RS1P 1 R 0 K 1R0 Ex.2 When there are 3 effective digits (such as in high precision metal film resistors). 5.62k Ω 562 x 10 1 5621 RN1/4PC 5 6 2 1 F

Mark No.

Description

Part No.

Mark No.

LIST OF ASSEMBLIES

NSP

NSP C

Description

Part No.

C303

CKSRYF104Z50 CKSRYF105Z10

1..TUNB ASSY (for Service)

VXX3025

C905, C929

1..JAFL ASSY (for Service) 2..JAFL ASSY 3..DVJB ASSY 3..FLJB ASSY 3..JACB ASSY 3..ATAB ASSY

VXX3005 VWM2315 VWG2523 VWG2536 VWV2115 VWV2123

RESISTORS

1..KEYB ASSY (for Service) 2..KEYB ASSY 3..PSWB ASSY 3..RSWB ASSY

VXX3032 VWM2332 VWG2526 VWG2530

1..MAIN ASSY (for Service)

VXX2997

1..SCRB ASSY (for Service)

VXX3021

1..POWER SUPPLY UNIT

VWR1392

R302, R304 R303, R308 R909 R361, R362 Other Resistors

RS1/10S100J RS1/10S120J RS1/10S330J RS1/8S0R0J RS1/16S###J

OTHERS X901 CERAMIC RESONATOR KN301 WRAPPING TERMINAL CN301 21P SOCKET U301 TV TUNER PACK

VSS1189 VNE1948 XKP3081 VXF1060

B JACB ASSY SEMICONDUCTORS

Mark No.

Description

Part No.

A TUNB ASSY D

SEMICONDUCTORS IC901 Q301, Q302, Q903, Q904 Q906 D901

MSP3417G 2SA1576A 2SC4081 1SR154-400

CTF1399 LCYA100J2520 LCYA101J2520 VTL1081

CAPACITORS

C909 C930, C931 C906, C908 C925, C928 C907, C915

CCSRCH101J50 CCSRCH220J50 CCSRCH560J50 CCSRCH561J50 CCSRCJ3R0C50

C937, C939 C934-C936, C940, C941 C310 C938 C313, C314

CEAL100M50 CEAL101M10 CEAL220M6R3 CEAL3R3M50 CEAT102M6R3

C901, C923, C926 C301, C302 C924, C927 C902, C904, C916-C919, C922

CKSRYB103K50 CKSRYB222K50 CKSRYB392K50 CKSRYF104Z25

BD3823FV BD4846G LA73031V LA73054 MM1501XN

IC101 Q107 Q102 Q404, Q406

PMC002A8 2SA1036K 2SA1576A 2SB1238X 2SC2411K

Q101, Q108, Q112, Q407, Q409 Q412 Q103, Q105, Q511 Q408 Q116

2SC4081 2SC4081 DTA124EUA DTA143EUA DTC114TUA

Q115, Q405 Q514, Q515 Q113, Q503, Q510 Q402, Q411 Q413

DTC124EUA HN1C03FU UMD2N UMF21N UMF23N

Q104 D102, D118 D105 D103, D107, D108, D114, D116 D403, D414, D506, D507, D509

UMH1N 1SR154-400 1SS352 1SS355 1SS355

D111 D508 D404-D412

DAP202U UDZS5R1(B) UMZ6R8N

> Q403

COILS AND FILTERS L301, L302, L901 L902 L903, L904 L305, L306

IC103 IC102 IC401 IC501 IC404

DVR-530H-S 1

Mark No. Description COILS AND FILTERS L401 L403 L101 L102 L103

Part No. CTF1399 LAU470J LCYA100J2520 LTA102J VTL1081

CAPACITORS C118, C424 C164-C166 C117 C102 C140

CCSRCH100D50 CCSRCH101J50 CCSRCH150J50 CCSRCH221J50 CCSRCH331J50

C141, C144, C525, C527 C175 C149, C153, C154, C156, C160 C155, C173, C431 C104, C127

CCSRCH471J50 CCSRCH681J50 CEAL100M50 CEAL101M10 CEAL101M16

C432 C167 C129 C128 C148, C151, C152, C157-C159

CEAL101M6R3 CEAL220M6R3 CEAL221M10 CEAL2R2M50 CEAT100M50

C405, C407 C124, C403, C434, C436, C503 C515, C516 C150, C459, C547 C435

CEAT100M50 CEAT101M10 CEAT101M10 CEAT101M16 CEAT101M6R3

C517-C519 C548 C106 C452, C520, C521 C142, C462

CEAT102M6R3 CEAT221M6R3 CEAT471M16 CEAT471M6R3 CKSRYB103K50

C438-C447, C464, C507-C509 C511, C512 C130 C451 C103, C105, C109-C111, C116

CKSRYB104K16 CKSRYB104K16 CKSRYB105K6R3 CKSRYB474K10 CKSRYF104Z25

C119, C120, C122, C125, C126 C132, C138, C139, C163 C168-C170, C176, C178 C408-C410, C412, C414 C417-C419, C421-C423, C450

CKSRYF104Z25 CKSRYF104Z25 CKSRYF104Z25 CKSRYF104Z25 CKSRYF104Z25

C453, C455-C458, C460, C463 C502, C504-C506, C510 C513, C514, C523 C411, C415 C425, C426

CKSRYF104Z25 CKSRYF104Z25 CKSRYF104Z25 CKSRYF104Z50 CKSRYF105Z10

C179, C180, C465 C549, C550 (47/16)

CKSYB106K10 VCH1241

Mark No.

Description

Part No.

JA101 MINI JACK(4P) CN103 CONNECTOR POST JA102 JACK

AKN1073 B2B-PH-K RKN1004

BT101 JA104 JA504 JA502 CN102

VEM1034 VKB1192 VKB1193 VKB1222 VKN1413

LITHIUM BATTERY JACK JACK 3P PIN JACK 9P CONNECTOR

CN101, CN104, CN105 27P CONNECTOR VKN1431 CN401, CN402 CONNECTOR VKN2008 JA501 OPT. LINK OUT 12MB/S VKS1001 ST101 BATTERY SOCKET VKX1019 KN401 SCREW PLATE VNE1948 B

KN403-KN405 WRAPPING TERMINAL VNF1084 CN404 21P PLUG XKP3070

C FLJB ASSY SEMICONDUCTORS IC301 Q306 Q308 Q307 D305

PT6315 2SA1576A 2SC4081 2SC5712 1SS355

> D304, D306

RF101L2S UDZS13(B) UDZS15(B) UDZS2R4(B) UMZ6R8N

D302 D301 D303 D310-D312

COILS AND FILTERS L301, L303

LAU220J

TRANSFORMERS > T302

VTT1166

CAPACITORS

C331, C332 C324 C313 C322, C323 C319

CCSRCH471J50 CEAL100M50 CEAL101M10 CEAL101M16 CEAT101M10

C301, C303, C321 C320 C304, C308, C312, C316-C318 C325, C326, C334, C335 C333, C336

CKSRYB103K50 CKSRYB223K50 CKSRYF104Z25 CKSRYF104Z25 CKSRYF104Z50 E

RESISTORS R316 Other Resistors

RS1/10S221J RS1/16S###J

OTHERS

RESISTORS R445, R448 R158 R413 R195, R196, R208, R435-R437 R520-R522, R529, R530, R532

RS1/10S0R0J RS1/10S330J RS1/16S7500F RS1/16S75R0F RS1/16S75R0F

IC302 REMOTE RECEIVER UNIT V301 FL TUBE JA302 3PIN JACK(VERTICAL) JA301 YC CONNECTOR(VERTI) CN302 8P CONNECTOR

RPM7140-H4 VAW1085 VKB1189 VKB1190 VKM1001

Other Resistors

RS1/16S###J

CN301 21P SOCKET KN301, KN302 SCREW PLATE 0 FL HOLDER (FE)

VKN2014 VNF1084 VNF1130

OTHERS X101 (15MHz) X102 (32.768kHz)

CSS1666 VSS1197

DVR-530H-S 5

Mark No.

Description

Part No.

Mark No.

D DVJB ASSY OTHERS A

JA601 1394-TERMINAL CN601 16P CONNECTOR

VKN1800 VKN2013

E ATAB ASSY OTHERS CN12 CN11

40P ATA CONECTOR 40P CONNECTOR

VKN1816 VKN2009

F PSWB ASSY VSG1024

RESISTORS Other Resistors

RS1/16S###J

OTHERS CN1101

CONNECTOR POST

Description

Part No.

IC1001 IC3001 IC3304 IC1011, IC3002

R8A34011BG TC74LCX541FTS1 TC7SAU04FU TC7SH08FUS1

IC4281, IC4282 IC3202 IC5101 IC1102 Q2501-Q2505, Q4202, Q4203

TC7SHU04FUS1 UPC4570G2-A UPD72852AGB-8EU-A VYW2308 2SA1576A

Q4501 Q3201 D3101-D3104 D4505, D4506

2SC2411K RN1903 1SS355 RB160M-40

COILS AND FILTERS

SWITCHES AND RELAYS S1201-S1206, S1212, S1213

F3101, F3303-F3305, F4231 F4281, F4282, F5101 L1004-L1008, L1102, L5108 L4203 L5601, L5604

DTF1069 DTF1069 DTL1106 LCYA6R8J2520 VTH1043

L2101

VTL1067

S3B-PH-K

CAPACITORS

G RSWB ASSY C

SEMICONDUCTORS Q1202, Q1203 D1207 LED(BLUE) D1203 LED(ORANGE)

DTC124EUA SLR-343BBT(FGHJ) SLR-343DC(NPQ)

SWITCHES AND RELAYS S1208, S1209

VSG1024

C3207, C3211 C3208, C3210 C5121 C4281, C4282, C5122 C4245, C4275

CCSRCH121J50 CCSRCH681J50 CCSSCH100D50 CCSSCH120J50 CCSSCH330J50

C4246 C3303, C3304 C3215, C3216, C4534, C4536, C4537 C2101, C3212, C3218 C5102

CCSSCH680J50 CCSSCJ3R0C50 CEVW101M16 CEVW101M6R3 CEVW220M6R3

C1002, C1062, C1231, C1315, C3314 C4201, C4220, C4268, C4276, C4571 C3318 C1004, C1036, C1059, C1104, C1201 C1220, C1301, C3008, C3214

CEVW221M4 CEVW221M4 CEVWNP470M10 CKSQYB106K6R3 CKSQYB106K6R3

C3301, C3302, C3404, C4514, C4515 C4545 C1901, C4502, C4508 C4525, C4526, C4546 C3007, C4551

CKSQYB106K6R3 CKSQYB106K6R3 CKSQYB225K10 CKSQYB475K6R3 CKSRYF104Z50

C1003, C1012, C1020, C1023, C1025 C1040, C1051, C1207, C1209, C1210 C1226, C1228, C1229, C1307, C1311 C1313, C4296, C4297, C4519, C4527 C1017, C1021, C1034, C1035, C1052

CKSSYB102K50 CKSSYB102K50 CKSSYB102K50 CKSSYB102K50 CKSSYB103K16

C1205, C1206, C1224, C1225, C1305 C1308, C3003, C3311, C3315, C3317 C4503, C4509 C1501, C1502, C1513, C1514, C4243 C5105

CKSSYB103K16 CKSSYB103K16 CKSSYB103K16 CKSSYB104K10 CKSSYB271K50

C3204 C1005, C1008-C1010, C1015, C1016 C1019, C1022, C1024, C1026 C1028-C1030, C1032, C1033, C1050 C1053, C1055-C1058, C1063, C1064

CKSSYB331K50 CKSSYF104Z16 CKSSYF104Z16 CKSSYF104Z16 CKSSYF104Z16

C1105, C1203, C1211-C1214, C1222 C1230, C1233, C1234, C1239-C1242 C1302, C1304, C1312, C1314

CKSSYF104Z16 CKSSYF104Z16 CKSSYF104Z16

CAPACITORS C1201, C1202, C1204-C1206, C1404

CKSRYF104Z25

RESISTORS Other Resistors

RS1/16S###J

OTHERS CN1202 CN1201

CONNECTOR POST CONNECTOR

S3B-PH-K VKP2355

H MAIN ASSY SEMICONDUCTORS > IC4571

BA25F18WHFP BD4850G BU4809F BU4828F CM0045AF

IC3203 IC3707 IC3706 IC4201 IC3301 IC1201, IC1221 IC1301 > IC4512 > IC4503, IC4504

CY244ZXC-04D EDD1216AATA-6B-E K4H511638B-UCB3 NJM2861F33 NJM2872F05

IC3303, IC4511 IC3201 IC3101 IC3401 > IC4509

NJU7013F PCM1742KE PCM1802DB1 PDF015A PQ035ZN01ZPH

> IC4506

R1170S331B

DVR-530H-S 1

Mark No.

Description

Part No.

C1320, C1321, C1328-C1331 C2501-C2505, C3004-C3006, C3101

CKSSYF104Z16 CKSSYF104Z16

C3104-C3106, C3113, C3202, C3203 C3206, C3209, C3217, C3309, C3312 C3401, C4244, C4249, C4251-C4256 C4261-C4263, C4265, C4291, C4501 C4504-C4507, C4516, C4517

CKSSYF104Z16 CKSSYF104Z16 CKSSYF104Z16 CKSSYF104Z16 CKSSYF104Z16

C4523, C4524, C4552-C4562 C5110-C5112, C5114, C5118, C5127 C1001, C1006, C1007, C1011, C1013 (1.0 YF) C1018, C1027, C1031, C1113, C1115 C1202, C1204, C1208, C1221, C1223

CKSSYF104Z16 CKSSYF104Z16 VCG1057

C1227, C1303, C1306, C1309, C1902 C3001, C3102, C3103, C3219 C3305, C3306, C3316, C3737, C3738 C3801, C3802, C4202-C4219 C4221-C4229, C4232, C4239, C4240

VCG1057 VCG1057 VCG1057 VCG1057 VCG1057

C4248, C4250, C4257-C4260, C4264 C4266, C4267, C4269-C4274 C4283, C4284, C4518, C4520 C4572-C4574, C5101, C5103, C5113 C5119, C5120, C5123-C5126

VCG1057 VCG1057 VCG1057 VCG1057 VCG1057

C3310, C4278, C4285, C4288, C4290 C4533 (1.0 YB) C4532 (22/6.3) C1215 (150/4) C4548, C4575, C4576 (47/4)

VCG1058 VCG1058 VCG1061 VCH1246 VCH1253

VCG1057 VCG1057

Mark No. OTHERS

Description

Part No.

CN4502 CONNECTOR CN1901 7P CONNECTOR CN3801, CN3802 FFC CONNECT0R CN3808 30P CONNECTOR CN5601 CONNECTOR

AKM1290 VKN1411 VKN1794 VKN1892 VKN2010

CN2201, CN3001 CONNECTOR CN4501 CONNECTOR X3401 CERAMIC (16MHz) X3301 CRYSTAL (27.000MHz) X4281 CRYSTAL (27.000MHz)

VKN2011 VKN2012 CSS1616 VSS1204 VSS1205

X5101

VSS1206

CRYSTAL (24.576MHz)

SCRB ASSY

SEMICONDUCTORS

RESISTORS

IC701 IC801 IC703 IC802-IC804 IC805

BA4558F-HT LA73026AV LA73054 MM1506XN MM1637XVBE

IC702, IC806 Q708, Q710, Q712-Q714, Q806 Q808-Q812, Q814, Q815 Q702, Q704 Q703, Q803, Q805

SN74AHC2G53HDCT 2SA1576A 2SC4081 2SC4097 DTA124EUA

Q705, Q813, Q816 Q801, Q802 Q701, Q807 D701, D801, D829 D830, D831

DTC124EUA HN1C03FU RN4903 1SS355 DAN217U

D802-D815, D822-D826, D828 D816 D702

DF3A5.6FU RB501V-40 UDZS12(B)

R5133, R5134 R1042-R1047, R1051, R1054 R4241, R4242 R3853-R3857, R4252, R4253, R4352 R4354, R4356, R4358, R4360

RAB4CQ0R0J RAB4CQ103J RAB4CQ103J RAB4CQ220J RAB4CQ220J

R3801-R3806, R3828-R3833 R1241-R1244, R1251-R1254 R1325-R1328, R3810-R3813, R3824 R3837-R3840, R3851 R1401-R1411, R1451-R1454

RAB4CQ223J RAB4CQ330J RAB4CQ330J RAB4CQ330J RAB4CQ560J

R1455-R1458 R3208, R3223 R3314, R3315, R4536, R4537 R3207, R3226 R5103

RAB4CQ820J RN1/16SC56R0D RN1/16SE1003D RN1/16SE1502D RN1/16SE5101D

C742, C748, C755 C846-C849 C741, C751, C758 C817, C818 C871, C873

CCSRCH100D50 CCSRCH102J50 CCSRCH180J50 CCSRCH220J50 CCSRCH221J50

R3209, R3224 R5108 R3003, R3101, R3201, R3205, R3206 R3402, R4224, R4230, R4232 R4513, R4514, R4522

RN1/16SE8201D RN1/16SE9101D RS1/10S0R0J RS1/10S0R0J RS1/10S0R0J

C745, C753, C760 C836-C845 C744, C752, C759 C743, C749, C756 C868-C870

CCSRCH270J50 CCSRCH471J50 CCSRCH680J50 CCSRCH8R0D50 CEAT102M6R3

R3110, R4532 R4202, R4206, R4531 R2502, R2505, R2508, R2511, R2514 R4201, R4204 R4203, R4210

RS1/16S1001F RS1/16S1101F RS1/16S1800F RS1/16S2201F RS1/16S2701F

C807, C808, C810, C811 C709, C717, C721, C731, C734 C805, C855 C726, C727, C802, C833, C834 C856-C858

CEVW100M16 CEVW101M10 CEVW101M10 CEVW101M16 CKSQYB225K10

R1501, R1503 R4534 R5104-R5107 Other Resistors

RS1/16S3901F RS1/16S5600F RS1/16S56R0D RS1/16S###J

C801 C814, C815, C823-C826 C832 C712-C716, C809, C813, C816 C829, C852

CKSQYF105Z16 CKSQYF106Z10 CKSRYB103K50 CKSRYB104K25 CKSRYB104K25

C703, C707, C710, C711

CKSRYF104Z25

COILS AND FILTERS L701, L703, L705 L702, L704, L706

LCYA100J2520 LCYA180J2520

CAPACITORS

DVR-530H-S 5

Mark No.

Description

Part No.

C718-C720, C722, C724, C725 C730, C733, C736, C739, C747 C754, C761, C762, C835, C851 C859, C862, C867, C872, C874

CKSRYF104Z25 CKSRYF104Z25 CKSRYF104Z25 CKSRYF104Z25

C804, C806, C854 C812 C819, C820, C827, C828 C860, C861, C863-C866 C723, C728

CKSRYF105Z10 CKSYB105K16 CKSYB106K10 CKSYB106K10 CKSYB475K16

6. ADJUSTMENT There is no information to be shown in this chapter.

RESISTORS

R836, R842 R758-R760 R715-R726, R737, R738 R745, R746, R753, R754 R826, R829-R832, R853-R857

RS1/10S75R0F RS1/16S1202F RS1/16S5600F RS1/16S5600F RS1/16S75R0F

R755, R756 Other Resistors

RS1/16S8201F RS1/16S###J

OTHERS JA801, JA802 CONNECTOR CN701, CN702 27P CONNECTOR KN801 SCREW PLATE

VKB1157 VKN1431 VNE1948

J POWER SUPPLY UNIT OTHERS >IC202 PROTECTOR (400mA) >IC301 PROTECTOR (630mA) >IC401, IC402 PROTECTOR (1.6A)

AEK7054 AEK7061 AEK7066

DVR-530H-S 1

7. GENERAL INFORMATION 7.1 DIAGNOSIS A

Jigs and Tools to be used Remote control unit for serving (GGF1381) DVD Recorder Data Disc (GGV1239) (When repairing until June 2005, use the Disc GGV1179.). Download disc Test disc (GGV1025) DVD-RW (Commercial goods)

Service Mode List 1. Setting type Item

When to perform

7.1.1 Model setting

• When rplacing MAIN ASSY or JACB ASSY.

7.1.2 CPRM ID number and data

• When "CPRM ERROR" is displayed on the display screen. • After the MAIN ASSY, DRIVE ASSY or HDD replaced.

7.1.3 Firmware downloading method

• After model setting (After replacing MAIN ASSY, DRIVE ASSY, JACB ASSY). • After the HDD is replaced. • When NG is displayed for the version infomation in Service mode.

7.1.4 Video Adjustment for Specific Area • 7.1.5 (4) OSD Filter Setting

When a flicker appears on the tuner display like a horizontal or vertial out-of-sync symptom

• When a character flicker appears on the OSD depending on the monitor.

2. Diagnosis type 7.1.5 Service Mode First screen : Version, Simple diagnosis of the RF level, Simple error rate measurement, HDD information. Second screen : ATA/ATAPI debug screen, LD degration judgement Fourth screen : VR-recording-related error loss Fifth screen : VR-playback-related error loss

• When confirming version infomation • When confirming the state of DRIVE Assy.

7.1.7 EPG Service Mode

When any failures occurs while a DV device connected When EPG data cannnot be or can be only partially obtained.

7.1.8 Aging Mode

When a claimed sympton is difficult to reproduce.

7.1.9 HDD Check Mode

When checking the quality of HDD.

7.1.6 DV Service Mode

Necessary procedure List when replacing Assys Following is the surely necessary procedures and the produet state after changing when replacing next ASSYs. Replaced ASSY

State after replacing

Necessary setting

User setting MAIN ASSY JACB ASSY

1. Model setting 2. CPRM setting 3. Firmwave download

DRIVE ASSY

1. CPRM setting 2. Firmwave download

HDD

1. CPRM setting 2. Firmwave download

HDD contents E

DVR-530H-S 5

SERVICE MODE MAP Operation ESC

Mode / Name

STEREO

CPRM ID number and data setting

DISP

< First screen > Version info, etc

DIG/ANA

< First screen subscreen 1 > Simple diagnosis of the RF level

DIG/ANA

< First screen subscreen 2 > Simple error rate Measurement

DIG/ANA

< First screen subscreen 3 > HDD information

DIG/ANA

< First screen subscreen 4 > OSD Filter setting

DISP

2 DIG/ANA 2 times < Second screen subscreen 3 > writer maintenance information of ATA/ATAPI DEBUGOSD

DIG/ANA

< Second screen subscreen 4 > LD degration judgement of ATA/ATAPI DEBUG OSD

DISP

DV Service Mode

DISP

< Fourth screen subscreen 4 > VR-Recording-Related Error Logs

DIG/ANA 3 times DISP

DISP

DIG/ANA

< Fifth screen subscreen 2 > VR-Playback-Related Error Logs

EPG Service Mode

DIG/ANA 1

CHP/TIM

DIG/ANA

CX E

Load the Recordable Disc

Select the Recordable Input Function

DVD HDD/DVD

Video Adjustment For Specific Area

1 General Setting mode 2 Specific-channel Setting mode

HDD check mode

ESC

REP.B

Aging mode (DVD)

ESC

REP.B

Aging mode (HDD)*3

HDD HDD/DVD Load the DL Disc(*1) to tray

Recording stop(*2) , then press

Play (*2)

Open/Close(*2)

1 2 Firmware Download 1 Holding user setting V data 2 Shipping mode

*1 DL Disc : Download Disc *2 Key on the front panel *3 By running change, how to enter the HDD Aging Mode is aktered to the steps below.

(HDD) F

Press HDD/DVD

ESC

REP.B

PLAY keys in that order.

DVR-530H-S 1

7.1.1 MODEL TYPE SETTING [Tool to be used]

[Purposes] When the MAIN Assy and/or TUJB Assy that are(is) commonly used with another model are(is) replaced, they(it) must recognize the model of this unit.

Items to be set: The model number, destination, and region No. must be set.

[Notes]

Remote control unit for servicing (GGF1381)

• Once the setting has been made, it can never be changed. Be sure to make the setting correctly. • As this setting resets the Assy(s) in question to the factory-preset status, it is recommended that you obtain the customer's consent beforehand. B

[Procedures] 1 After power on, the following screen is displayed on

[Recorder's Model Setting] Input the number using the remote for Service.

TV monitor. Press four digits properly (for example " 2201 ") by using the remote control unit for service, according to the screen information.

>--Input No. Model [ 22** : DVR-530H [ 23** : DVR-630H [ 24** : DVR-433H

2 Disconnect then reconnect the AC power cord of the

] [ ] [ ] [ [ [

** 01 02 03 04 05

: : : : :

Destination /WY ] /WV ] /WY/RE ] /WY/GR ] /WY/SP ]

unit. Be careful not to impart vibration to the unit immediately after the AC power cord is disconnected.

3 Reset the recorder to all its factory settings.

(Make sure that the recorder is on. Press and hold 7 (STOP) key and press (STANDBY/ON) key on the front panel.) The recorder turns off with all settings reset. D

4 Press [ESC] then [DISP] keys by using the remote

control unit for servicing, and then confirm each Model Name (for example " DVR-530H/WY ").

DVR-530H/WY VERSION : 3.∗∗ SYSCON : RELEASE_166 Rev :1.10357.2.43 TUNERCON : 835.000 DRIVE : DVD-RW DVR-R09R 1.52 DLDL000946WL HDD DEVICE REGION C FLASH IRCON (*) TFD (*)

: : : : : : :

WDC WD1600BB-xxGUCx PRISM2-ES2 2 ∗∗∗∗∗∗∗∗∗ 64M 1.01 EPG EU LIB

OK OK OK OK 160

OK OK

(*) : Except DVR-433H model

5 End

DVR-530H-S 5

7.1.2 CPRM ID NUMBER AND DATA SETTING [Purposes] For the DVD recorder,it is necessary with the recoding/playback of DVD–RW disc to set an individual number (ID number) and ID data to each recorder. If the number and data are not set correctly with the following procedure, cannot work with residual quantity 0:00 or operations in the future may not be guaranteed with RW disc. You will find the ID number to be set on the ID label on the rear panel.

The Input is Necessary When: • " CPRM ERR" is displayed on the FL display immediately after the power is turned on or in Stop mode. • When the MAIN ASSY , DRIVE ASSY or the HDD is exchanged.

[Tools to be used]

STANDBY/ON ONEOUCH T COPY

OPEN/CL OSE

HDD

GHI

PQRS

DVD ABC

DEF

JKL

MNO

TUV

WXYZ

INPUT SELECT

CLEAR

CLEAR SUBTITLE ANGLE PLA Y MODE

A UDIO

DISC NAVIGATOR

TOP MENU

ENTER HOME MENU

GUIDE

REV SCAN

RETURN

INFO

HELP

PLAY

PAUSE ST OPOK

FWD SCAN

BACK CM SKIP

CA SE PREVSELECTION NEX T

REC STOP REC

DISPLAY

STEP/SLOW

REC MODE TIMER REC

TVCONTROL

TV/DVD

INPUT CHANNELVOL UME TVDIRECT REC SELECT

DVD RECORDER

Remote control unit supplied with the unit (VXX2969)

Remote control unit for servicing (GGF1381)

DVD Recorder Data Disc (GGV1239)( *1 )

Important: If no ID label is found on the rear panel, write down the specified ID number by checking it according to "How to confirm the ID number" shown below.

[Notes]

• Input the ID number while the unit is in Stop mode. • After the data are read from the ID data disc (GGV1239), the disc will automatically be unloaded.

( *1 ) DDV1239 will be released on July 2005. Until new disk(GGV1239) will be released, use GGV1179.

DVR-530H-S 1

Input Flow of the ID No. and ID data when exchanging HDD, MAIN Assy or Drive Assy

• When exchanging HDD or MAIN Assy, or both exchanged • When exchanging HDD

When exchanging DRIVE Assy

Power →

When displayed "CPRM ERR"

Also exchanging DRIVE Assy simultaneously

When displayed following message at Power on FL Tube : [HDD ERR] CRT display :

Only exchanging DRIVE Assy

When displayed following message at Power on FL Tube : [CPRM ERR] CRT display :

HDD information is not correct.

CPRM information is not correct.

Confirmation of the CPRM ID No. Deletion of the CPRM ID No.(when ID No. is registered.)

Input of the CPRM ID No. and ID data Power →

OFF →

Normal operation mode New HDD/when there is error on recorded contents

Exchanging to the original HDD(when there is no error on the recorded When displayed following message at contents.) End Power on FL Tube : [HDD ERR] CRT display : HDD information is not correct. Execute HDD Initialize from the Disc Setup menu.

[CAUTION] All recorded data are deleted if the HDD is intialized. Take care that restoration of the user's data recorded on the HDD is totally impossible. Before servicing, OBTAIN THE USER'S PRIOR CONSENT to that effect.

*Use Remote Control of the unit Execute HOME MENU → Disc Setup → Intialize HDD → Initialize → Start

*Goes to normal operation with no caution

Disc Setup Basic Initialize Finalize Initialize HDD

End

Initialize

Start

End

After OSD displaying "Finished" after initilaization, reboot. F

DVR-530H-S 5

How to Input the ID Number and ID Data A

1 To enter the input mode, press ESC + STEREO keys sequentially in a status with no ID number set, such as after FLASH-ROM downloading.

5 While the data are being read, the message shown in the figure at left is displayed on the screen. (The FL display indicates "LOAD ID.")

[Recorder's ID Data Setting]

2 As number input is enabled when the unit enters the input mode, input the 9-digit ID number. (The entered number is also displayed on the FL display.)

[Recorder's ID Number Setting] ID Number ? >---------

<CLEAR> Exit

Loading The ID Data Disc !

Input ID Number ! 6 When the ID data have been read, the data are written to the FLASH-ROM. (The FL display indicates "WRITE ID.")

3 After inputting the number, press SEARCH keys to register the ID number.

[Recorder's ID Data Setting]

[Recorder's ID Number Setting] ID Number ? > 0 0 0 0 0 0 0 0 1 OK ? 6

<PLAY> Compare Mode <SEARCH> Enter

Wait Rom Writing !

Input ID Number !

4 When the ID number has been registered, the unit enters the ID data input mode. (The FL display indicates "INSERT ID.") In this condition, place the ID data disc on the tray and close the tray using the CLOSE key "7/0" on the player.

7 When the ID data have been written to the FLASH-ROM, the message "Rom Write OK" is displayed on the screen. (The FL display indicates "ID OK.") 8 After confirming this message, press CLEAR key to exit the input mode.

[Recorder's ID Data Setting]

<CLEAR> Exit E

Rom Write OK !

<CLEAR> Exit

Insert The ID Data Disc !

DVR-530H-S 1

[How to Confirm the ID Number] 1 Press ESC + STEREO keys sequentially with an ID number already set, and the unit enters the ID number confirmation mode.

2 The set ID number is displayed on the screen (and on the FL display), permitting you to confirm it. 3 To exit this mode, press CLEAR key.

[Recorder's ID Number Setting] ID Number ? [ 0 0 0 0 0 0 0 0 1] Compare >********* <CLEAR> Exit <STEREO> ID Data Setting Mode

Input ID Number !

[How to Clear the ID Number] 1 Press ESC + STEREO keys sequentially with an ID number already set, and the unit enters the ID number confirmation mode. 2 Input the same number as the ID number you have set.

[Recorder's ID Number Setting] ID Number ? [ 0 0 0 0 0 0 0 0 1] Compare >********* <CLEAR> Exit <STEREO> ID Data Setting Mode Input ID Number ! D

3 After inputting the number, press STOP key. Only when the entered number matches the set ID number, the ID number is cleared and the unit exits this mode. If the numbers do not match, you must return to step 2. ( STOP key is not accepted until 9 digits are entered.)

[Recorder's ID Number Setting] ID Number ? [ 0 0 0 0 0 0 0 0 1] Compare > 0 0 0 0 0 0 0 0 1 OK ? 3

<PLAY> Enter <STOP> Memory Clear <STEREO> ID Data Setting Mode Input ID Number !

DVR-530H-S 5

7.1.3 FIRMWARE DOWNLOADING METHOD [Purposes] 1. When the main board is replaced, the firmware versions for the system control computer, drive, IR microcomputer and the TUFL microcomputer do not match, and operations of the unit may be destabilized. To match the versions for the above four, firmware downloading is necessary in the following two cases: 1 After the model setting 2 When NG is displayed on the first screen (version information, etc.) of Service mode 3 After changing MAIN Assy, JACB Assy or Drive Assy 4 After changing HDD (downloading the EPG Library (program code) to HDD)

[Notes] When downloading is disabled, at ON time, usually "HDD data is not correct" is displayed on screen and "HDD ERR" on the FL . The EPG program is not booted up. 2. Rewriting the firmware to the latest version may ameliorate the symptoms claimed by the customer.

There are the following two methods for downloading: disc download and serial download

1. DISC DOWNLOAD [Tools to be used]

[Notes] Be sure NOT to turn off the unit during downloading. If the unit is turned off during downloading, the SYSCON, TUNERCON and DRIVE programs may not be properly rewritten, in which case the unit may not be able to initialize itself normally when turned on again.

Remote control unit for servicing (GGF1381)

Download DISC

[Procedure] 1 Open a disc tray by pressing the "OPEN/CLOSE" button. 2 Put the download disc on the tray. Press a " Record Stop " button while pressing a "PLAY" button on the frontpanel. * The disc tray closes automatically and the disc is loaded. * The disc tray opens automatically after loading.

FL display

L O A D

D O W N L O A D - 3

D O W N L O A D - 1

D O W N L O A D - 4

D I S C

D O W N L O A D - 5

D W L D

3 Take out the Download Disc.

D O W N L O A D - 2

* After download is completed, the power turns off, and turns on and a disc tray closes automatically. * It takes for about 7-8 minutes until download is completed.

DVR-530H-S 1

4 Press and hold a " ESC " button, then press " DISP " button on the remote control unit for servicing. 5 Confirm a firmware release version. 6 Press " ESC " button on the remote control unit for servicing in order to exit the test mode.

[Tips] (1) If the power is not correctly turned on or when the power is shut off during downloading, proceed as follows before performing download again: • In a case where downloading was incorrectly terminated while "DOWNLOAD-1" was displayed on the FL display: The EPG Library (program code) will not be downloaded to HDD correctly. (*) Download from the disc again. When it is unable to download, or not operating correctly, replace the HDD.

• In a case where downloading was incorrectly terminated while "DOWNLOAD-2" was displayed on the FL display: The SYSCON program will not function correctly. If the program cannot be downloaded from the disc or through serial communication, replace the FLASH ROM (IC1102 : MAIN ASSY). • In a case where downloading was incorrectly terminated while "DOWNLOAD-3" was displayed on the FL display: The DRIVE program will not function correctly. If the program cannot be downloaded from the disc or through serial communication, replace the DRIVE Assy. • In a case where downloading was incorrectly terminated while "DOWNLOAD-4" was displayed on the FL display The program for the tuner microcomputer will not function correctly. If the program cannot be downloaded from the disc or through serial communication, replace the TUNERCON microcomputer (IC101 : JACB ASSY).

• In a case where downloading was incorrectly terminated while "DOWNLOAD-5" was displayed on the FL display The program for the IR microcomputer will not function correctly. (*) If the program cannot be downloaded from the disc or through serial communication, replace the IRCON microcomputer (IC3401 : MAIN ASSY). (2) The setting way to shipping mode (Reference) At 2 lines of the [Procedures], press "OPEN/CLOSE" button while pressing REC STOP button. D

(*) : Except DVR-433H model

DVR-530H-S 5

2. SERIAL DOWNLOAD [Purposes] A

1. When the main board is replaced, the firmware versions for the system control computer, drive, and the TUFL microcomputer do not match, and operations of the unit may be destabilized. In such a case, the versions for the above three must be matched. 2. This method is used when disc downloading fails. • In the serial download, the stored code are not downloaded to HDD. After serial downloading, be sure to do disc download.

[Tools to be used]

[Connection]

* PC with serial port * RS-232C straight cable * RS-232C I/F jig (GGF1348) * 7P FFC (VDA1681) * Download program (UFU.exe) * Firmware

Connect as follows:

RS-232C I/F RS-232C cable

This unit 7P FFC

[Procedures]

1 Connect the 232C I/F jigs above way. 2 Turn on the PC and start the " UFU.exe ". 3 Select the Firmware file. ("sz0" file) 4 Turn the DVD recorder on and start the download program. " Target Device is connected " is appeared on the screen. D

5 Select the Communication Speed (Baud Rate) a) Base Speed 38,400 b) Data Send Speed 115,200 6 START • Even if you click "START" button, sometimes "Communication Error" may come out one to twice, and download may fail. In this case, please click "START" again. • Other factors can be considerd if download fails 3 times or more. • And it takes about an hour for updating the firmware.

DVR-530H-S 1

7.1.4 VIDEO ADJUSTMENT FOR SPECIFIC AREA [Purposes]

[Tools to be used]

STANDBY/ON ONEOUCH T COPY

Depending on the area, if a flicker may appear in a picture received by the tuner, it can be corrected or reduced with this setting.

OPEN/CL OSE

HDD

GHI

PQRS

DVD ABC

DEF

JKL

MNO

TUV

INPUT SELECT

WXYZ

CLEAR

SUBTITLE ANGLE PLA Y MODE

A UDIO

DISC NAVIGATOR

TOP MENU

ENTER HOME MENU

GUIDE

REV SCAN

RETURN

INFO

HELP

DISPLAY

PLAY

PAUSE ST OPOK

REC STOP REC

FWD SCAN

BACK CM SKIP

CA SE PREVSELECTION NEX T

STEP/SLOW

REC MODE TIMER REC

TVCONTROL

TV/DVD

INPUT CHANNELVOL UME TVDIRECT REC SELECT

DVD RECORDER

Remote control unit supplied with the unit (VXX2969)

Remote control unit for servicing (GGF1381)

1. Specific-Channel Setting mode In this mode, specific settings can be made for up to 12 channels. For channels that do not have specific settings, the settings of General Setting mode are applied.

[How to enter this mode] 1 Select a channel or line input (L1-L3) on which a specific setting is to be made. 2 Press the ESC then CHP/TIM keys on the remote control unit for servicing. "General Setting mode" is displayed. 3 Press the DIG/ANA key in General Setting mode. Specific-Channel Setting mode is entered.

[How to exit]

Press the ESC key on the remote control unit for servicing to return the Normal mode.

[Note]

Setting is in effect only during recording/playback stop.

[Setting examples] The setting examples in Specific-Channel Setting mode are shown below. For details on each setting item, see "Table 1: Key operations in Specific-Area Setting mode." [When specific channel setting have NOT been made] AVIO Specific Area Mode Ver.2.00 Input - [ TUNER ] Sync AGC : ON Threshold : Normal Threshold Level : 052 Bottom Limit : 000

General setting data

* * *

Individual setting state Input Channel - [ Pr 1 ]

Bottom Limit

AVIO Specific Area Mode Ver.2.00 Input - [ TUNER ] Sync AGC : ON Threshold : Manual Threshold Level Threshold Level : 052 Bottom Limit : 000

D *

Individual setting state Input Channel - [ Pr 1 ] Sync AGC : ON Threshold : Manual Threshold Level

Sync AGC : --Threshold : -----Threshold Level : ---

Specific channel setting data

[When specific channel setting have been made]

Threshold Level : 048 Bottom Limit : 000

: ---

[Tips]

• If a channel that does not have specific settings is displayed, the setting figures are displayed as hyphens (- -). • If the setting figures are not displayed as hyphens, those settings have been specifically set even if they are identical to the default settings or those of General Setting mode. • The setting indicated with an asterisk (*) is the default. • The channels to be indicated for "Input Channel" are as shown below: Line inputs: L1-L3, DV (DV is not valid for specific-area settings.) Tuner channels: Channels received by the tuner (channels to be set in Specific-Channel Setting mode, etc.) F

DVR-530H-S 5

• Indication when the maximum number (12) of channels have individual settings If a channel that does not have specific settings is currently selected, the indication will be as shown below, and individual data items cannot be set for that channel. To set individual data items for the currently selected channel, you must clear any specific-channel settings for one or more channels.

[Tips] A

AVIO Specific Area Mode Input - [ TUNER ] Sync AGC Threshold

Ver.200

: ON : Manual Threshold Level

Threshold Level : 052 Bottom Limit : 000

Individual setting state

Sorry ! You can store only 12 channels for Specific Area mode.

2. General Setting mode [How to enter this mode] • To shift from Specific-Channel Setting mode: Each time the DIG/ANA key is pressed, Specific-Channel Setting mode and General Setting mode are alternately selected.

• To shift from Normal mode (recording/playback stop): Press the ESC then CHP/TIM keys.

[How to exit]

Press the ESC key to return the normal mode.

[Setting examples] Show setting example on the General Setting mode screen to the following. Regarding setting of actual each item, refer to table 1 (key operations in specific-area setting mode).

[Display in General Setting mode when the channel currently displayed has specific settings]

[General Setting mode screen]

AVIO Specific Area Mode Ver 2.00 Input - [ TUNER ]

AVIO Specific Area Mode Ver 2.00 Input - [ TUNER ] Sync AGC : ON Threshold : Normal Threshold Level :

* *

Sync AGC Threshold

Bottom Limit

Threshold Level : Bottom Limit : 000

: 000

: ON : Normal

* * *

E This channel is set up

*: Setting is the default.

individually.

• General Setting mode can be entered only during recording/playback stop. • The currently selected input mode (TUNER or LINE) is displayed for "Input." • If L1, L2, L3, or DV is selected for input, general settings for the line input can be made (DV is not valid for specific-area settings), and if TUNER is selected, general settings for the tuner input can be made.

[Tips]

DVR-530H-S 1

Switches General setting mode and Specific setting mode.

Operation

(*)Normal Bottom + Alfa Manual Threshold Level V Manual Threshold Level According to the selected Threshold type, the value can be changed in the range shown below: • Bottom + Alfa 0 - 255 (Default : 87)

[ Rev ×3 ], [ ×3 Fwd ] Sets Threshold.

[ Rev CHAPTER SKIP ] Sets Threshold Level. [ CHAPTER SKIP Fwd ] –

ON : The sync level is set to an appropriate value. OFF : Cancel the Sync AGC.

–

Remarks

Used in SpecificChannel Setting mode

Used in General Setting mode

• V Manual Threshold Level 0 - 255 (Default : 173)

• Manual Threshold Level 0 - 255 (Default : 173)

ON(*) / OFF

–

Switching (*: Default)

[ SIDE A ], [ SIDE B ] Sets SyncAGC.

Switches inputs or channels. [INPUT SELECT], [CHANNEL +/-] (Remote control unit supplied with this unit)

[ DIG/ANA ]

Key

Table 1: key operations in specific-Area setting mode (1/2) Key operations in Specific Area Setting mode of the remote control units are shown in the table below (the keys are of the remote control unit for servicing unless otherwise stated):

5 7

DVR-530H-S

To quit VDEC Setting mode for a specific area and clear the on-screen display.

[ ESC ] –

–

The General Setting data will not be changed (will be retained).

General Setting mode: All general setting data are reset to default. The specific setting data will not be changed (will be retained).

Specific-Channel Setting mode: All specific data are initialized. The General Setting data will not be changed.

The General Setting data will not be changed.

–

Remarks

Used in SpecificUsed in General Channel Setting mode Setting mode

Notes: • Each key listed in Table 1 above is active only while the tuner is completely stopped. • The setting values will not be reset to default even if resetting to the state at the time of shipment is performed.

The specific-channel-setting data for the currently selected channel are reset to default.

[ PAUSE ]

Specific-Channel Setting mode: If the currently selected channel has its specific setting, that setting will be canceled. (By canceling the specific setting for that channel, the number of remaining channels that can have specific settings will be increased by one.) General Setting mode: Settings of General Setting mode are initialized.

All channels that have specific setting data will be canceled, and the specific data will be initialized.

[ PLAY ]

0 - 255 (Default: 0)

[ CLEAR ]

Sets Bottom Limit.

[<<|| STILL STEP], [STILL STEP ||>>]

Switching (*: Default)

Operation

Key

Table 1: key operations in specific-Area setting mode (2/2)

1 3

DVR-530H-S

7.1.5 SERVICE MODE Overview and purposes To be used to check the status of the product and to collect the information for failure diagnosis. The following information to be used for servicing is displayed: [1] First screen : Version, HDD information, etc. [2] Second screen : ATA/ATAPI debug screen (Writer information) [4] Fourth screen : VR-recording-related error logs [5] Fifth screen : VR-playback-related error logs

Each screen has sublevel screens. After entering any Service mode screen, to shift to another Service mode screen, first quit that Service mode screen then enter another Service mode screen.

[Note]

1. Version information, etc. (First screen) [Purposes]

[Tools to be used]

To check the versions of the system control computer, TUNER microcomputer, and firmware for the drive, simple measurement of the RF level for the U/V tuner, results of the simple error rate measuremen, HDD information, and OSD Filter setting Remote control unit for servicing (GGF1381)

Aluminum-coated test disc (GGV1025)

[How to enter] While the GUI screen is not displayed, press the ESC then DISP keys. How to enter and change subscreens of the first screen: While the first screen is displayed, press the DIG/ANA key repeatedly until your desired subscreen is displayed. The subscreens change

[How to quit]

Press the ESC key. D

DVR-530H-S 5

[Description]

OK : Appropriate version compared with that of the firmware of the system control computer OK+ : The version of the TUNER microcomputer is advanced. Measures to be taken: Download the firmware. NG : The type of the TUNER microcomputer is not appropriate. Measures to be taken: • Download the firmware. NG- : The version of the TUNER microcomputer is older. Measures to be taken: • Download the firmware.

(1) First screen A

DVR-530H/WY 2 VERSION : 3.∗∗ SYSCON : RELEASE_166 Rev :1.10357.2.43 TUNERCON : 835.000 DRIVE : DVD-RW DVR-R09R 1.52 DKT0000233JP

1 3 4 5

6 7 8 9 10 11 12

HDD DEVICE REGION C FLASH IRCON (*) TFD (*)

: : : : : : :

WDC WD1600BB-xxGUCx PRISM2-ES2 2 ∗∗∗∗∗∗∗∗∗ 64M 1.01 EPG EU LIB

OK OK OK OK

OK : The appropriate drive is mounted. NG : An inappropriate drive is mounted. Measures to be taken: Replace with an appropriate DRIVE Assy.

160

OK : Appropriate version compared with that of the firmware of the system control computer OK+ : The version of the drive microcomputer is advanced. Measures to be taken: Download the firmware. NG- : The version of the drive microcomputer is older. Measures to be taken: Download the firmware.

OK OK

1 2 3 4 5 6 7 8 9 0 =

Model name/destination Version of the recorder software Revision No. of the system-control computer software Version No. of the tuner microcomputer Result of the combination ckeck with system u-com Information on the built-in drive (Model name, version No., model type, serial No.) Data of the built-in HDD, capacity of the HDD Version No. of PRISM Region No. CPRM information (CPRM key No.) FLASH ROM information EPG dictionary information, Version HDD stored code information HDD stored data (EPG Library) Category of stored data EU EPG model : EPG EU LIB

OK : The serial No. for the drive has been registered. NG : The serial No. for the drive has not been registered. Measures to be taken: Replace with an appropriate DRIVE Assy. OK : Appropriate version of theIRCON NG+ : The version of the drive IR blaster computer is advanced. Measures to be taken: Download the firmware. NG- : The version of the IR blaster microcomputer is older. Measures to be taken: Download the firmware.

OK Not Found

: Normal readout is finished. : Disable to read Measures to be taken: 1 CPRM Input 2 Download the firmware.

(*) : Except DVR-433H model

DVR-530H-S 1

• Details on HDD data are described below: HDD

WDC10234564 # 160 A

Capacity of the HDD (unit: Gbytes) HDD identification error indication Name of manufacturer, part No. by manufacturer

If any abnormality exists in HDD connection, the indications shown in Table 1 below are displayed. Table 1: HDD recognition status represented by the HDD data display Example of HDD data to be displayed

HDD identification conditions

Failure in physical identification of HDD (no connection, defective HDD, interface error)

• • • •

Blank space

Physical identification of HDD possible, but not identified (CPRM ID is not input.)

WDC 10234564 # 160

Physical identification of HDD possible, HDD identified, but failure in logical formatting

WDC 10234564 ! 160

Physical identification of HDD possible, HDD identified, and correct logical formatting (HDD correctly identified)

WDC 10234564 160

Remarks Check the connection to the ATA connector. Replace the ATA flexible cable and connector. Replace the HDD. Replace the resistor in the ATA communication line.

• Input the CPRM ID. "!" represents an HDD-recognition error. • Initialize the HDD (see page 82), or erase all titles.

If an error indication in the HDD data does not disappear even after the above measures were taken, refer to another sheet of "HDD Service Mode." C

(2) Simple diagnosis of the RF level (Subscreen 1) [Purposes]

To check the RF signal of the U/V tuner by checking the input frequency difference and AGC voltage in this debug mode

[How to enter]

While the User Setting display is displayed, press the ESC , DISP , then DIG/ANA keys, in that order.

[How to quit]

Press the ESC key. D

[Description]

DVR-530H/WY VERSION : 3.∗∗ SYSCON : RELEASE_∗∗∗ Rev :1.∗∗∗∗∗∗ TUNERCON : 835.000 DRIVE : DVD-RW DVR-R09R 1.52 DKT0000233JP HDD DEVICE REGION C Input CH Freq Diff AGC Volt

: : : :

WDC WD1600BB-xxGUCx PRISM2-ES2 2 ∗∗∗∗∗∗∗∗∗

OK OK OK OK 160

Input channel Input frequency difference AGC voltage

: ∗∗ ch : Low 1 : ∗∗∗∗ mV

Subscreen 1

DVR-530H-S 5

1) AFT voltage (Freg Diff) How much tuning is off is monitored, as shown below: Input Frequency A

Faraway High (within 200kHz)

Display High 7 High 1~5 Center

Just Tune

Low

within 200kHz over 200kHz

Low 1~5 Low 7

2) AGC voltage (AGC Volt) The gain controlled by the tuner is monitored to infer the input electric field intensity. (The accuracy of inference differs depending on the product.)

Field Intensity

AGC VOL

Intense field area (Clear image)

70 dBµ or more

3100 mV or less

Less intense field area (Noise may be generated.)

50 dBµ or more 70 dBµ or less

3100 - 4400mV

Weak field area (Much noise. EPG/VPS/PDC sometimes cannot be obtained.)

30 dBµ or more 50 dBµ or less

4400 mV or more (It is unable to discriminate under the weak field area.)

Very weak field area (Image damaged. EPG/VPS/PDC cannot be obtained.) 30 dBµ or less

4400 mV or more (It is unable to discriminate.)

Tips: For good reception, the field intensity must be 50 dBµ or more (AGC Volt 4400 mV or less). For accurate measurement, use a field intensity meter.

(3) Simple Error Rate Measurement (Subscreen 2) [How to enter] • While the User Operation screen is displayed, press the ESC then DISP keys, then the DIG/ANA key twice, in that order. • While subscreen 1 of the first screen is displayed, press the DIG/ANA key.

[How to quit]

Press the ESC key.

[Measurement procedures] 1 Display subscreen 2. 2 Load the Test disc (GGV1025). 3 Judge the results of the error rate measurement by referring to Table 1 on page 89.

ERR RATE : ∗.∗e-∗

Subscreen 2

[Tips] During VR mode playback, the average value of the past 10 VOBUs is displayed. During DVD-Video or Video mode playback, the average value of the past 256 sectors is displayed. During VR mode playback, the speed ratio of the drive (/: normal, no indication: double speed) is also displayed. F

DVR-530H-S 1

Table 1: Thresholds when determining OK or Error Recording mode

Disc type

Finalized or not finalized

Reference value A

DVD-VIDEO

−

8.0×10-4

DVD-R

Video mode

Finalized Not finalized

1.0×10-3 1.0×10-3

DVD-RW

Video mode

Finalized Not finalized

1.0×10-3 1.0×10-3

(4) HDD information (Subscreen 3) [How to enter] • While the User Operation screen is displayed, press the ESC then DISP keys, then the DIG/ANA

key three times, in that order. • While subscreen 2 of the first screen is displayed, press the DIG/ANA key.

[How to quit]

Press the ESC key.

[Mode description] HDD Info Life Time: 87599h 09m 05s

Cumulative HDD-on time

Subscreen 3

[Tips] • How the data on cumulative HDD-on time are processed in memory Storage place: FLASH ROM D

Timing of referring to the data on cumulative HDD-on time: When the power is turned on, fails, the FLASH ROM is referred to. Timing of updating the data on cumulative HDD-on time: While the HDD is on, the data on cumulative HDD-on time in the RAM is updated every 3 seconds, and every time updating is executed the data are stored in the Backup SRAM. When the power is turned off, the data are stored in the FLASH ROM. • How to clear the data on cumulative HDD-on time FLASH ROM: When the HDD Identification Setting is performed, the data on cumulative HDD-on time are automatically cleared. The HDD Identification Setting is automatically performed when the CPRM setting is performed on the CPRM setting screen (to display the CPRM setting screen, press the ESC then the STEREO keys). Notes: • The data on cumulative HDD-on time are not cleared when resetting to factory-preset values is performed. • The data on cumulative HDD-on time are not cleared when the system-control computer software is downloaded.

DVR-530H-S 5

(5) OSD FILTER SETTING (SUB screen 4) Depending on the monitor used, the character flicker on the OSD may stand out. If a system, such as charavter flicker, appears on the monitor, select the filter response.

[Purpose]

[Tools to be used]

Remote control unit for servicing (GGF1381)

[How to enter]

• While the User Operation screen is displayed, press the ESC then DISP key four times, in that order. • While subscreen 3 of the first screen is displayed, press the DIG/ANA key.

[How to quit]

Press the

ESC

keys, then the DIG/ANA

key.

[Setting procedures] C

OSD Filter Setting

1 Display subscreen 4. 2 Select the setting from the key operation table.

OSD FILTER :

Subscreen 4

[Tips] * If a setting data is changed, that is immediately reflected, and the data are written to nonvolatile memory (IC1102 : FLASH). * The download for shipping mode see the data to default (ON). D

[(Table 2) Key operation of OSD Filter setting] Key [ Rev x 3 ] [ x 3 Fwd]

[ESC]

Operation

Setting data (* : default)

Select ON / OFF setting of OSD Filter Turn off the OSD and quit from the function. (Appears the tuner screen.)

Remarks

ON(*) / OFF

[Rev x3] : Set the OSD Blightness Filter OFF [x3 Fwd] : Set the OSD Blightness Filter ON –

–

DVR-530H-S 1

2. ATA/ATAPI Debug Screen (Second screen) [Purposes]

[Tools to be used]

To be used as a rough guide to judge whether the pickup unit is all right or not

• Dirt on the pickup lens • Degradation of the laser diodes for reading CDs and reading/writing to/from DVDs

Remote control unit for servicing Aluminum-coated test disc (GGF1381) (GGV1025)

[How to enter] • While the User Operation display is displayed, press the ESC , DISP , then 2 keys, in that order. • While any subscreen of the second screen is displayed, press the DIG/ANA key repeatedly. The subscreens change cyclically.

[How to quit] Press the ESC key.

(1) Writer maintenance information of ATA/ATAPI DEBUG OSD (Subscreen 3) [How to enter] • While the User Operation screen is displayed, press the ESC , DISP then 2 keys, then the DIG/ANA key twice, in that order. C

[How to quit] Press the ESC key. [Procedures] Update the display by pressing the SEARCH key while subscreen 3 is displayed. 1

2 3 4 5

ATA/ATAPI Power ON 0102:56 DVD R0053:48 W0022:16 CD R0034:04 W0000:00

Writer MaintenanceInfo 00 00 00 0000 00000000 01 00 00 0000 00000000 02 00 00 0000 00000000 03 00 00 0000 00000000 04 00 00 0000 00000000 05 00 00 0000 00000000 06 00 00 0000 00000000 07 00 00 0000 00000000 0 0- 0 0

Error log for the Writer (Not for Service) 1 Power-on time/cumulative power-on time 2 Duration of emission of the laser diode (LD) for DVD-R/DVD while reading 3 Duration of emission of the LD for DVD-W/DVD while writing 4 Duration of emission of the LD for CD-R/CD while reading 5 Duration of emission of the LD for CD-W/CD while writing (This function is not used for this model.)

2 If the total hours of duration of emission of the laser diode (LD) for DVDs while reading 2 and that of emission of the LD for DVDs while writing 3 exceed 4,700 hours, the LDs may be degraded. Perform an LD degradation judgment, using subscreen 4. MTTF hours for each LD (R9R Drive Assy [total hours of reading and writing]) DVD: 4,700 hours CD: 11,000 hours The ATA/ATAPI Writer Maintenance Info is obtained each time the power is turned on. Thereafter, the data on the subscreen is updated each time the SEARCH key is pressed (the updating command is sent) while this subscreen is displayed. Care must be taken when updating this subscreen, because an undesired command is inserted if it is executed while recording, etc.

[Tips]

DVR-530H-S 5

(2) LD degration judgment of ATA/ATAPI DEBUG OSD (Subscreen 4) [How to enter]

• While the User Operation screen is displayed, press the ESC , DISP then 2 keys, then the DIG/ANA key three times, in that order.

[How to quit]

Press the ESC key.

[Notes]

• For correct measurement of items 1 to 4 indicated in the display below, leave the unit at room temperature (25°C) for a while before turning it on, and do not load a disc. • For RF measurement (item 5), it is recommended to use the Test disc (GGV1025). As the RF level differs depending on the characteristics of the pickup from product to product, it cannot be used for judging degradation of the LD. Use the RF level as a rough guide to know the difference between before and after lens cleaning.

[Procedures]

To update the value for each item, press the SEARCH key while subscreen 4 is displayed. For details on each item and the conditions of updating the values, see Table 2 below.

A T A / A T A P I - LD Degrade CD DVD TMP ADJ RF TLT

1 2 3 4 5 6

:0070 :0068 :00A3 : 0 0 67 :3D70 :FFD5

104% 96% 4 1 °C 2 6 °C

OK OK

Table 2: Description of each item and conditions for updating data No.

Item

Conditions for updating by pressing the SEARCH key

Description

Degradation judgment of LD for CD. Regarded as NG when the value No disc inserted in the disc tray is 120% or higher (same standard as for the PC drive)

DVD

Degradation judgment of LD for DVD. Regarded as NG when the value is 120% or higher (same standard as for the PC drive)

No disc inserted in the disc tray

TMP

Current temperature inside the Writer

No disc inserted in the disc tray

ADJ

Temperature (approx. 25°C) inside the Writer during adjustment

No disc inserted in the disc tray

RF level (16-bit data, proportional calculation performed using the actual RF level value with 2.5 V = 0xFFFF as the maximum value, displayed in 4-digit hexadecimal)

During playback of disc medium (GGV1025)

TLT

Writer adjustment data for straight (non-HDD) model (FFFF is diplayed when the writer is not adjusted.)

No condition

If the results of degradation of the LDs for CDs and DVDs are both NG, replace the drive. E

DVR-530H-S 1

3. VR-Recording-Related Error Logs (Fourth screen) [Purposes]

[Tool to be used]

To roughly determine in which category shown below a symptom that is difficult to reproduce belongs. For details on the categories of error logs displayed, see "Table 1: Description of VR-recording-related errors."

• Errors related to the MPEG Encoder • Errors related to the drive system • Errors related to copying • Errors related to others • Errors related to the HDD

Remote control unit for servicing (GGF1381)

[How to enter]

• While the User Operation display is displayed, press the ESC , DISP , then 4 keys, in that order. • While any subscreen of the fourth screen is displayed, press the DIG/ANA key repeatedly. The subscreens change cyclically.

[How to quit]

Press the ESC key.

[Description of each subscreen] (1) VR-Recording-Related Error Logs (Subscreen 1) C

• Errors related to recording are displayed on the lines "Rec Err:," as shown below. For details on errors, see "Table 1: Description of VR-recording-related errors." RunFnc : ---- Ecl : **** Rate : ** -------------------------------------------------------------------------------------------------------------------------------

Recording-related errors are displayed.

(2) Subscreen 2 and 3

(These subscreens are not for service use.)

(3) VR-Recording-Related Error Logs (Subscreen 4) 1

Recording Error History Display 01–06–01 20:05:30 No SysHdr IN 01–06–02 00:22:10 Write Error

1 There are two error-log screens, on which up to 9 logs per screen are displayed. (generation time [year-month-day, hour:minute:second], error data in simplified description)

• The two error-log screens can be switched by pressing the SPEED+ or SPEED- key. • For details on error messages, see Table 1 "Description of VR-recording-related errors".

[Tips]

(4) Subscreen 5 to 11

(These subscreens are not for service use.) F

DVR-530H-S 5

4. VR-Playback-Related Error Logs (Fifth screen) [Purposes]

[Tool to be used] It can be inferred that an operation that caused an error in the drive was performed or that a failure occurred in the drive if any of the error logs shown in "Table 2: Description of VR-playbackrelated errors" is recorded on this screen.

Remote control unit for servicing (GGF1381)

[How to enter] • While the User Operation display is displayed, press the ESC , DISP , then 5 keys, in that order. • While any subscreen of the fifth screen is displayed, press the DIG/ANA key repeatedly. The subscreens change cyclically.

[How to quit]

Press the ESC key.

[Description of each subscreen] (1) Subscreen 1

(This subscreen is not for service use.)

(2) VR-Playback Error Logs (Subscreen 2) C

• For details on error messages, see Table 2 "Description of VR-playback-related errors". • If a VR-playback-related error is generated, a problem in data reading from the disc may be suspected. (The possibility of a problem on the drive side is high.) 1

G : 01–01 00m00s# –. – e – – 00000000 h m s Message h m s Err G001 : 000000 Tr : N u l l b l k L002 : 001230 Tr : S c h L a t e L002 : 004103 Tp : V o b D i f + L002 : 004104 Tp : V o b D o f –

1 Data on location of the display (Display only in disc playback with the VR mode) Original(G)/play list (L), title No., chapter No. [X:XX-XX], time of the display (min, sec, frame) [XXmXXsXX], busy mark of the virtual mechanical-control computer [#], error rate of the transfer data [X.XeXX], playback logical address (ID) [XXXXXXXX] 2 Error message log Original(G)/play list (L), title No., time of generation (min, sec) [XXX:XXXX], playback-related error log for the last 13 errors [XX:XXXXXXX] E

DVR-530H-S 1

Table 1: Description of VR-recording-related errors Any error message marked with ∗ is displayed "RecErr : ---------" on the Subscreen 1 of the fourth screen.

Error related to MPEG Encoder Error Message

Description

AVEnc Hang

AVEncoder failed

IN Encode *

Changes cannot be made in the process of encoding

No SysHdr IN

System packet is not input periodically

Stm Start NG

Failure to start encoding (reasons not clear)

Stream NG

Inappropriate input stream data

Strm Start NG

Timeout waiting for system packet input at the beginning

Error related to Drive system In a case of an error in the drive system, scratches or dirt on a disc, or a problem of the drive itself (dirty pickup) may be suspected.

Error Message

Description

Bdr Cls NG

Close Border failed

Bdr Opn NG

Open Border failed

BUF Overflow

Overflow of the Stream Buffer

CLS Rzon Fail

Video Mode Close Rzone failure

Drive Hang

The Drive is hung up.

Drv Err

General error of the drive

Drv Hard Err

Abnormality in the drive hardware or firmware

Drv TimeOut

Timeout waiting for drive operation

Fail Repair

Repair failed

Format NG

Format failed

May Be V mode

Although TMP_VMGI is not written, it may be Video Mode disc.

Mech No Res

No response from the mechanical-control computer

MKB Invalid

MKB reading error

NWA Exhaust

NWA surpassed and impossible to use

OPC NG

OPC failed

PCA Full

PCA has been used up.

Read Err

Reading failed, ECC failed, etc.

ReadOnly DISC *

Because some data are invalid, data cannot be written

RMA Full

RMA has been used up.

Rzn Cls NG

Close RZone failed

Rzn Rpr NG

Repair RZone failed

Rzn Rsv NG

Reserve RZone failed

TMP-VMG WrErr

Video Mode TMP VMGI Write Error

VTSI_B Wr Err

Video Mode VTSI BUP Write Error

VTSI_B2 Wr Err

Video Mode VTSI BUP Write Error (After Layer Change)

VTSI Wr Err

Video Mode VTSI Write Error

VTSI2 Wr Err

Video Mode VTSI Write Error (After Layer Change)

Write Err

The Drive failed to write and could not be recovered.

Error related to Dubbing Error Message

Description

H2D CP SomeNG

Other NG HDD →DVD copy

Mem get NG

Video Mode Copy Memory has not ensured.

Strm TransfNG

Video Mode Copy Stream Transfer NG

Tracon Trn NG

Video Mode Copy Tracon tranfer has not been completed.

VC Cell Max

Maximum number for Video Mode copy Cells exceeded

VC CopyCancel

Video Mode Copy Copy Cancel F

DVR-530H-S 5

Error related to Dubbing (continued) Error Message A

Description

VC FlushC NG

Video Mode Copy Flush Cache NG

VC HDD C Err

Inappropriate Video Mode Copy HDD content

VC HDD Inf NG

No information on Video Mode Copy HDD

VCHDD Info NG

Obtaining Video Mode Copy HDD Cell information failed

VC Idling NG

Video Mode Copy idling NG

VC Pck Anl NG

Analizing Video Mode Copy Pack failed

VC Transf Stp

Video Mode Copy Transfer Stop

VC TSO BLK NG

Video Mode Copy TSO Block transfer has not been completed.

VC VOBU SizeE

Video Mode Copy VOBU Size NG

V Rsv RzoneNG

Video Mode Copy Reserve Rzone failed

V2H APP FL NG

VR → HDD APP FLG is OFF

V2H Aud Ch NG

VR →HDD Audio Channel NG

V2H Aud Md NG

VR →HDD Audio Mode NG

V2H Aud Stm N

VR →HDD Audio Stream number NG

V2H SRC Prot

VR →HDD copy prohibitted material

V2H Unknown

VR →HDD other NG

V2H VOBU TMNG

VR →HDD Play back time of each VOBU is different

V2H V Reso NG

VR →HDD Video resolution NG

Other Errors Error Message Abort * Already open BK BATT Down BK FSYS Dirty BUG BusReset Done Cell Close NG CPRM IC NG Dir Depth Err Disc Full DRAM CLR Err DRAM NG Drive Destroy EncModul Hang F Alrdy Exst File cansel FileNot Exist Format Excec Invalid Disc * Invalid Param * Invalid P VMG Invalid TMVMG Invalid UDF * Invalid VMG * Invalid VTSI Irr Action * MKB REVOKED Limit Over * No More Info * No Permission * No Video Now Busy * NV Pck DMA Er NV Pck MK Err Ourob Strm NG Over Heat PARAM NO ACCP

Description Cancellation Extension file is already opened. Backup RAM data has been erased. Backup RAM data has not been wrtten on the File Sys. Some bugs Bus Reset has been excecuted. Cell Close NG Inappropriate CPRM IC Tree of Directory is too deep. No further data can be written because the disc is full. Video Mode DRAM (Stream Buffer) Clear failure Abnormality in access to the Work DRAM The drive has crashed. Encoder routine is hung up. Extension file is already exist. Extension file is canseled. Extension file is not exist. Formatting has been executed. The disc cannot be recognized. Invalid parameter Information of +VR is NG. Invalid TMP_VMGI content Invalid UDF content Invalid VMG content VTSI information of +VR is unusual. Incorrect action Error in gaining data Standard maximum limit exceeded No more space in the internal work-management area No permission to write to the disc No video input (not locked) In the process of the emergency processing Inappropriate NaviPack DMA Error in creating NaviPack Inappropriate stream data to the Ouroboros input Abnormal temperatute Recording parameter is not matched.

DVR-530H-S 1

Other Errors (continued) Error Message

Description

Process Over

Process is overfull.

Protect Src *

Source to be recorded is copy-protected.

Rec Pause *

No operation permitted during recording pause

Relocation Do

VR-recording data was relocated

Repair Excec

Repairing has been executed.

Something *

Undetermined error

SRAM NG

Abnormality in access to the backup work SRAM

Status NG *

Abnormality in change of statuses

SW PVR

Switch to +VR playback process

SW Vpb mode *

Switching to video playback routine is required.

SW Vrec mode *

Switching to video recording routine is required.

Unmatch Stamp *

Impossible to modify because of nonmatching time stamp

VBR-SRAM NG

Abnormality in VBR SRAM

V Categ ID NG

Inappropriate Category ID

V Cate Inf NG

Inappropriate Category information

V Ext MAX Ovr

Count Max exceeded

V ExtToo Big

The extension file is too large.

V Ext TY NG

Type NG

Virgin DISC

Virgin Disc

VOBU Info NG

Inappropriate VOBU information

WaterMark Det

Watermark detected

WM Cracked

Error related to HDD Error Message

Description

Do nothing

Do nothing for demand.

ESFSYS CORUPT

easyfsys error

ESFSYS INIT

easyfsys initializing

HDD Buff High HDD DEF DONE HDD DEF ERR HDD Destroy

High-level process executed for the HDD Buffer HDD deflag finished HDD deflag error HDD is not recognized on the bus.

HDD INFO BAD

HDDReset Done

Incorrect HDD Management Data HDD initialized Abnormal power off Inconsistent MBR data HDD Reset executed

HDD ROMSUM NG

Rom-code check sum NG

HDD SIG NG

Inconsistent HDD Management Data Magic

HDD SMART NG HDD unauthor

Inappropriate HDD SMART DMA error in HDD copy transfer Inconsistent HDD serial No.

HDD Zero WR

MBR was witten

Task No Activ

Task has not been activated. Title recording time full

HDD Initialize HDD IRRG POFF HDD MBR NG

HDD Trans Err

TT Rec Over

No Error Error Message Non Err *

Description Normal Abbreviations: ECC = 4 byte Code for Error Correction UDF = Universal Disc Format PCA = Power Calibration Area OPC = Optical Power Control NWA = Next Writable Address

VMG = Video Manager RMA = Recording Management Area MKB = Media Key Block TMP_VMGI = Temporary Video Manager Information Border = from Lead-in to Lead-out

DVR-530H-S 5

Table 2: Description of VR-playback-related errors A

Error Message

Description

Av : B/CTOvr

AV1: Buffer-clear timeout

Av : SpmTOvr

AV1: Timeout for a step command

Av : StrmOvr

AV1: Timeout for waiting for stream ready

Av : TpmTOvr

AV1: Timeout for TP mode change

CC_OS_ERR

Closed caption task: OS error

ERR_RCV!

TPP task: Detects hang-up of AV decoder and starts recovery

Mn : Av1Hang

Main task: Detects hang-up of AV decoder and starts recovery

Rv : LnkFail

Reverse playback task: Starts compensation by detecting link failure

Rv : LnkTOvr

Reverse playback task: Timeout for waiting for link

Rv : OplTOvr

Reverse playback task: Timeout for waiting for I-picture of the open GOP immediately after starting decoding

Rv : OpnTOvr

Reverse playback task: Timeout for waiting for B-picture of the open GOP immediately after starting decoding

Tr : OrderEr

Transfer task: Inconsistent order

Rv : R2FTOvr

Reverse playback task: Starts retrial after detecting timeout from reverse pause to forward pause

Rv : TopVbEr

Reverse playback task: Forced termination because of a possible error of the top data during reverse normal playback

Rv : 1stTOvr

Reverse playback task: Timeout for waiting for interruption to the top VOBU immediately after starting decoding

Tp : midNULL

TPP task: The management information pointer designated was NULL.

Tp : RStepEr

TPP task: Although the reverse step had failed, the operation was forcibly terminated because the top cell was located.

Tp : ScanNg

TPP task: Failure to set the TPP memory when scanning was canceled.

Tp : tppErr

TPP task: Inconsistency occurred.

Tp : VobDif+

TPP task: The decoder STC advances by 1 VOBU hour.

Tp : VobDif-

TPP task: The STC of the management information advances

Tr : NaviErr Tr : NullBlk

Transfer task: Inconsistency between NAVI (navigator) of management data and actual NAVI Transfer task: NULL at the top block (Detecting NG stream made at the DVR-1000 series and starting protection process.)

Rv : OrderEr

Reverse playback task: Inconsistent order

Tr : ReadErr

Transfer task: ATA read error

Tr : SchLate

Transfer task: ATA search late

Tr : SemTOvr

Transfer task: Timeout for gaining semaphore (no synchronization with the display)

Abbreviations: D

STC = System Time Clock VOBU = Video Object Unit GOP = Group Of Picture B-picture = Bidirectionally predictive-picture

I-picture = Intra-picture P-picture = Predictive-picture TP mode change = AV1 term (Trick Play mode change)

100

DVR-530H-S 1

7.1.6 DV SERVICE MODE 1. DV debug [Purpose]

[Tools to be used]

To check whether communication between a DV device and the unit is normal when a DV device is connected

Remote control unit for servicing (GGF1381)

[How to enter]

• DV device • DV cable

Press the ESC , DISP then 3 keys, in that order. B

[How to quit]

Press the ESC key.

[Mode description] 1

(DV/1394) Init:OK AV:02 DV:01

[Recorder] GUID:00E0360004A00001

3 4 5 6 7 8 9 10

[DV] GUID:0080880303480E96 VN:VICTOR MN:GR-D50K TM:C3 TS:75 CT:32 WP:01 PS:FF OS:00 CA:A000002020 CV:FF MD:VTR [DVdecode:Yes] LineSys:525-60 TC:00h20m35s02f RD:02/02/05 RT:10h34m50s ASPECT:4:3 CGMS:000000 APSTB:00 DEC:525-60 SF:32KHz QU:12bit AMODE:4) Stereo

Boldface alphanumerics : Fixed indications Nonboldface alphanumerics : Variable indications

No.

Item

Remarks

Init AV

Number of AV devices recognizing connection

Number of DV devices recognizing connection

GUID

GUID set in ConfigROM of the unit

Description Whether the initialization of 1394 LINK and DV order inside PRISM2 has been completed (OK) or not (NG)

Identification number of AV devices including D-VHS, etc other than DV devices. If the number does not become 01 even if a DV device is connected, identification of that device fails. GUID : Global Unique ID (Specific ID for DV devices)

101

DVR-530H-S 5

No. 3

Item

Description

Remarks

GUID set in ConfigROM of the DV device connected

Data are displayed only if one DV device is identified. Vendor name set in ConfigROM of the connected (Depending on the device, the vendor name may not be set in DV device ConfigROM.)

Model name set in ConfigROM of the connected DV device

TM TS CT WP PS

CA CV MD

DV device mode

Camera or VTR is displayed only if one DV device is identified.

[DVdecode:XXX]

Whether Yes (in the process of requesting DV input) or No is indicated in XXX

Normally, Yes is indicated only when CH is set to DV.

LineSys

Input Line System setting

Time-code data of the DVdecode Stream, or response data of the Time Code command

Rec Date of DVdecode Stream

RT ASPECT

Rec Time of DVdecode Stream Aspect Ratio of DVdecode Stream

CGMS

CGMS of DVdecode Stream (from left to right, *CGMS (Copy Generation Management System): The two-digit codes added to broadcast programs represent CGMS data of bits 5-4: Audio ch 2, bits 3-2: the following: Audio ch 1, and bits 1-0: Video) 00: Copy freely, 10: Once copy, 11: Never copy

APSTB

APS trigger bit of DVdecode stream

DEC

With/without DVdecode stream input

With input: Signal type (525-60, 625-50, 1125-60, 125050, or Invalid) is indicated, Without input: "No" is indicated.

Sampling Frequency of DVdecode Stream

If SF is 44 kHz, it is considered that 44.1-kHz audio is input, and sound is muted on the unit.

QUANTIZATION of DVdecode Stream

AMODE

AUDIO MODE of DVdecode Stream

Data are displayed only if one DV device is identified. (Depending on the device, the model name may not be set in ConfigROM.)

Transport Mode data obtained from the DV device Data are displayed only if one DV device is identified. Transport State data obtained from the DV device Cassette Type data obtained from the DV device Write-protection data obtained from the DV device Power-state data obtained from the DV device Output signal mode data obtained from the DV device Connect AV data obtained from the DV device Data are displayed only if one DV device is identified. Camera/Vtr mode data obtained from the DV device

Data are displayed only if one DV device is identified.

GUID

Stream time-code data are obtained when the DV signal is inputted. Otherwise, time-code data are obtained through an AV/C command.

102

DVR-530H-S 1

No sound for DV input

DV input recording impossible

No picture nor sound for DV input

No operation for DV input

Symptoms

DV -

DV =

Check SF: 32 khz: An audio signal with 32-kHz sampling frequency is being input. 48 khz: An audio signal with 48-kHz sampling frequency is being input. 44 khz: An audio signal with 44.1-kHz sampling frequency is being input.

An audio signal with 44.1-kHz sampling frequency is muted.

Recording cannot be performed for a copy-protected source.

Defective DV terminals, improper connection of the DV-terminal board, defective IC, defective source device Note: As to a model having the Input Line System setting, if the setting and the actual input signal system do not match, no picture appears.

Check DEC: 525-60: An NTSC DV signal is input from the DV device. 625-50: A PAL DV signal is input from the DV device. No: No DV signal is input from the DV device. Check CGMS:

Defective IC1001(PRISM2), defective soldering, defective power supply, etc.

Check of DV decoding when the recorder channel is set to DV: Yes: The recorder is in the process of a DV input operation No: The recorder is not executing a DV input operation

DV 9

DV -

Defective DV terminals, improper connection of the DV-terminal board, defective IC5101(1394PHY), defective cables, an IEEE 1394 device other than the DV

Defective IC1001(PRISM 2) / IC5101(1394PHY), improper connection between IC1001 / IC5101 defective soldering, etc.

Possible causes

DV 1

Check the init indication: OK: Initialization of 1394 LINK and DV decoder inside PRISM2 appropriately completed NG: Initialization of 1394 LINK and DV decoder inside PRISM2 has not been completed properly.

Items to be Checked, and Conditions

Check the number of DV devices when one DV device is connected to the recorder: 01 : The connected DV device is correctly identified. Other than 01 : The connected DV device is not correctly identified.

DV 1

Location in the Debug Screen

2. Simple Diagnosis of DV

5 6 7

DVR-530H-S

103

7.1.7 EPG SERVICE MODE (Except DVR-433H model) [Purposes] A

[Tool to be used]

Reasons for the following malfunctions can be inferred by checking the conditions for obtaining the past EPG data: 1 EPG data cannot be obtained. 2 Some EPG data obtained are missing. Remote control unit for servicing (GGF1381)

[How to enter]

â&#x20AC;˘ Press the ESC , DISP , +10 then 7 keys, in that order.

[How to quit]

Press the ESC key.

[Description of the mode] 1. Summary screen 0 1 2 3 4 012345678901234567890123456789012345678901234567 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14

(EPG EURO) Next Data Download Time : 14:00 Duration : 01h30m

EPG Data Receive Err Summary Date Start End MD CH RcvPkt TotalErr 03/31 13:00 13:30 DL 03 001853 000000 03/31 09:00 11:00 DL 03 001192 000000 03/31 08:00 08:05 HS -- 000645 000000 03/31 00:00 00:00 000000 000000 03/31 00:00 00:00 000000 000000 03/31 00:00 00:00 000000 000000

Lines 01-02

The next download starting time for the EPG data is displayed. Next Data Download Time: Starting time Duration: Duration required for acquiring the EPG data

Lines 09-14

The 6 latest error logs when EPG data were received are displayed, with the latest one at the top. Date Start End MD CH RcvPkt

Total Err

[Tips]

: Month/day when reception started : Time when reception started : Time when reception ended : Method for acquiring the EPG data (HS: Host scanning process, DL: Downloading process of the EPG data) : Data-receiving channel : Total number of received packages. A number 999,999 or greater is displayed as "999999." : Total errors during reception. The sum of Hamming Err, Trans Err and InvLine Err numbers indicated on the Detail screen. A number 999,999 or greater is displayed as "999999."

In a case where only "HS" is displayed in the MD column of the logs, the host channel has not been found. It is necessary to check the country and postal-code settings in the user settings.

104

DVR-530H-S 1

2. Detail screen [How to enter]

Press the DIG/ANA key while the Summary screen is displayed. Up to 6 detail screens (1 to 6) are displayed, one each time the DIG/ANA key is pressed. Each detail screen 1 to 6 corresponds with the EPG reception error logs from the top on the Summary screen.

[How to quit]

Press the ESC key.

[Description of the Detail screens] 0

012345678901234567890123456789012345678901234567 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14

(EPG EURO) EPG Data Receive Err Details - 1

Date : 03/31 Start Time : 13:00 Host CH : 03

END Time : 13:30 P-ON Kind : Download

Data Receive Part Total Err : 000000 Pkt Rcv Num : 001853 Pkt Snd Num : 001853 Inv Line Err : 000000 Slice Cont : Auto EQ : OFF LV : -h Temporary Buffer Information Pool Num : 000000 Max Store : 000000 Discard Pkt : 000000 Use Num : 000000

Line

Display item

Description

Remarks

The rightmost figure represents the EPG Data Receive number of the current detail screen. Err Details-X This number corresponds to the order of the EPG reception error log from the top.

Line 01

Lines 03-05, Reception conditions

Date Start Time END Time Host CH P-ON Kind

: Month/day when reception started : Time when reception started : Time when reception ended : Data-receiving channel : Methods for acquiring the EPG data (host scanning and downloading)

Only during initialization, host scanning is automatically executed to find the host broadcast.

Lines 07-10, details on errors during reception

Total Err

: Total numbers of errors during reception. The total number of Hamming Err, Trans Err and InvLine Err indicated on the Detail screen. A number 999,999 or greater is displayed as "999999."

Total Errors: If the total number of errors reaches two digits or greater, it is likely that EPG data acquisition failed. Display subscreen 1 of the first screen and check the electric field intensity from the AGC level.

Pkt Rcv Num

: Total number of received packages. A number 999,999 or greater is displayed as "999999." : Total number of packages that were sent to the application program among all the received packages. A number 999,999 or greater is displayed as "999999."

If the total number of received packages is 0, it is likely that the country and postal-code settings are wrong.

Pkt Snd Num

InvLine Err

: Total number of errors that were generated by receiving data from invalid lines. A number 999,999 or greater is displayed as "999999."

Slice Cont

: Slice level control Auto-Tu Con, Manual - Syscon.

: Equalizer setting (ON, OFF)

: Slice level (10~30 hex) (Only when the slice Cont is Manual.)

Note: The data on lines 12-14 are for software development, not for service use. F

105

DVR-530H-S 5

7.1.8 AGING MODE

[Tools to be used]

[Purposes]

OPEN/CL OSE

HDD

DVD DEF

ABC

If symptoms regarding recording/ playback of discs and/or the HDD that your customer claimed are difficult to reproduce, they can be reproduced with a long-time test in Aging mode.

GHI

JKL

MNO

PQRS

TUV

WXYZ

INPUT SELECT

CLEAR

CLEAR SUBTITLE ANGLE PLA Y MODE

A UDIO

DISC NAVIGATOR

TOP MENU

ENTER HOME MENU

GUIDE

REV SCAN

RETURN

INFO

HELP

PLAY

PAUSE ST OPOK

REC STOP REC

DISPLAY

FWD SCAN

BACK CM SKIP

CA SE NEX T PREVSELECTION

STEP/SLOW

REC MODE TIMER REC

TVCONTROL

TV/DVD

INPUT CHANNELVOL UME TVDIRECT REC SELECT

DVD RECORDER

Remote control unit for servicing (GGF1381)

Remote control unit supplied with the unit (VXX2969)

Commercially available, recordable DVD-R and DVD-RW discs

[Notes]

• When aging for the DVD-RW and HDD is executed, all recorded data on them will be erased. • Commands from the remote control unit are accepted during Aging mode. • If Aging mode is quit using the ESC key, indications on the FL display will return to normal display. • Cancel timer settings before entering Aging mode. • Set the recording rate beforehand. It cannot be changed during Aging mode.

[How to enter]

1 2 3 4

[How to quit]

Press the ESC key on the remote control unit for servicing to quit Aging mode and return to Normal mode. Notes: • If during recording: Recording is stopped. • If during playback: Playback is paused. • If during initialization: The unit stops after initialization is finished. (aging for RW only) • If the tray is being opened/closed: The unit stops after the tray is opened/closed. (aging for RW only)

STANDBY/ON ONEOUCH T COPY

Press the DVD key to switch to DVD. Load a recordable disc. Select the input function of a recordable source. After disc detection is performed, press the ESC then REP.B keys on the remote control unit for servicing to enter Aging mode.

[Description of operation] Aging for the DVD-RW/DVD-R Aging for the DVD-R

Aging for the DVD-RW D

During Aging mode, the following operations are repeated in the order shown below. 1 The tray opens. 2 The tray closes. 3 Initialization 4 Recording for 60 minutes 5 Playback for 45 minutes

During Aging mode, the following operations are repeated in the order shown below. 1 The tray opens. 2 The tray closes. 3 Recording for 1 minute 4 Recording pause for 6 minutes 5 Recording stops. 6 Playback for 1 minute 7 Playback pause for 6 minutes 8 Playback stops. Note: A continuous test of the above operations is possible for approximately 23 hours.

3 Initialization is performed according to the setting specified in "DVD-RW automatic initialization" (accessed by selecting "Unit Setting" then "Option").

After 2 the tray closes, disc detection is performed, and if 99 titles have already been registered, the unit stops there. The number of loops is retained and indicated on the FL display. An error indication is retained as an OSD.

During Aging, the number of loops is indicated on the FL display, as shown below. [AGING 0001]

If an error is generated, the aging operation stops. If an error is generated, the aging operation stops. Note: Indications on the FL display are retained, and Note: Indications on the FL display are retained, and this information is also retained as an OSD. this information is also retained as an OSD. Note: Recording time depends on the recording rate set. For example, if the recording rate is MN32, only up to 60 titles can be registered. Check the setting for recording rate before performing aging.

106

DVR-530H-S 1

[Aging for the HDD] [How to enter]

1 Press the HDD key to switch to HDD. 2 Press the ESC key then the REP.B key on the remote control unit for servicing to enter Aging mode.

[How to quit]

Press the ESC key on the remote control unit for servicing to quit Aging mode and return to Normal mode. Notes: • If during recording: Recording is stopped. • If during playback: Playback is paused. • If during erasure of all memory data from the HDD, the unit stops after all memory data have been erased.

[Description of operation] During Aging mode, the following operations are repeated in the order shown below. 1 Erasure of all the memory data from the HDD 2 Recording for 60 minutes 3 Playback for 60 minutes During Aging, the number of loops is indicated on the FL display, as shown below. [AGING 0001]

[Tips]

If an error is generated, the aging operation stops. Note: Indications on the FL display are retained, and this information is also retained as an OSD.

107

DVR-530H-S 5

7.1.9 HDD CHECK MODE How to diagnose failure of the hard disc drive (HDD) A

Purpose: With use of the HDD-diagnostic program contained in the product itself, physical errors on the HDD can be diagnosed. Use this program to diagnose whether or not the HDD is in failure when one of the symptoms indicated below is recognized, or when a failure in the HDD is suspected. Symptoms of failure in HDD: (1) HDD Error (2) Failure in HDD recording or playback (3) HDD not recognized

Tool to be used: Remote control unit for servicing (GGF1381)

1. Flow of HDD diagnosis (1) Flowchart of HDD diagnosis Check the HDD Information.

Yes

Is something wrong? C

No Execute Self-Test.

Yes

Has an error occurred?

Execute Extended Self-Test. Result of the diagnosis: Failure in HDD Measures to be taken: Replacement of HDD

Yes

Has an error occurred?

No Execute writing test, if required.

Execute HDD Read/Write Check.

Has an error occurred?

Yes

No F

Result of the diagnosis: No abnormality

108

DVR-530H-S 1

(2) Overview of the diagnosis items HDD Information

SELF TEST

EXTENDED SELF TEST

HDD Read / Write Check

This is a display for checking the HDD information, such as the model name of the HDD, continuous power-on time, authentication status, and results of the diagnosis on the end of service life.

This is a simplified diagnosis for the HDD. A serious failure in the HDD can be detected with this test. Time required for testing: Approx. 90 sec.

This is a reading test across all sectors of the HDD. Data recorded on the HDD will not be erased, because no writing operation is performed. Time required for testing: Approx. 3 hours/160 GB

This is a writing, reading, and comparing test across all sectors of the HDD. All data recorded on the HDD will be erased, because all the data are to be overwritten. Be sure to obtain your client's consent beforehand. Time required for testing: Approx. 11 hours/160 GB

2. How to start or terminate the diagnostic program How to start/terminate the diagnostic program Use the remote control unit for servicing. How to start: Press the "ESC", "CX", "0", and "1" keys simultaneously. How to terminate: Press the "ESC" key. Do NOT perform other operations on the unit while the HDD diagnosis is in progress. Although the diagnostic program is designed to function independently from the unit's functions, an operation on the unit during a diagnosis may cause a malfunction. The status of the unit recommended during diagnosis is as follows: All stop, no timer recording (including auto-recording), and Input selection to L1-L3.

109

DVR-530H-S 5

3. Diagnosis procedures A

Display the menu on the screen. The menu indicated below is displayed when the diagnostic program is started. To enter each mode, press the corresponding key "1"-"4" on the remote control unit for servicing. Tests to be executed 1 HDD Information: Check of the HDD information 2 S.M.A.R.T. DST: Executing a simplified test or a reading test of all data 3 HDD R/W Check: Executing a writing/reading test of all data. All data on the HDD will be erased if this test is executed.

Note: "2. S.M.A.R.T. Attribute . . ." is not to be used.

2 C

Check the HDD information. Press the "1" key on the remote control unit for servicing. Check the following data: Model: Is the correct model name of the HDD displayed? Recog. No: Is a positive value displayed? SMART threshold: Is "not exceeded" displayed? Detailed description 1 Model: For the correct model name, refer to the display of the unit. 2 Recog. No: Positive value: The HDD has been authenticated. Negative value: The HDD has not been authenticated. 3 SMART threshold: exceeded: The HDD has come to the end or near the end of its service life. not exceeded: The HDD has not reached the end of its service life.

To return to the menu screen, press the "Clear" key. E

110

DVR-530H-S 1

Execute Self-Test. Press the "3" key on the remote control unit for servicing while the menu screen is displayed. When the following screen is displayed, press the "1" key to start the Self-Test. A

The progress of the test is displayed on the screen. The percentage remaining of the test is displayed on the screen, and the test is terminated when the percentage reaches 00%. Check whether or not an error has occurred after the test is finished. Diagnosis results â&#x20AC;˘ Without an error: ". . . Completed" is displayed. Then, proceed to the Extended Self-Test. â&#x20AC;˘ With an error: ". . . Error" is displayed. Look at the number in Test Result. If the place value for tens is 1 or 2, execute the Self-Test again. If it is from 3 to 7, the HDD must be replaced.

Note: If the result of the second test is the same, replacement of the HDD is required.

Example: No error

Example: With an error

To return to the menu screen, press the "Clear" key.

111

DVR-530H-S 5

Execute the Ext (Extended) Self-Test.

Press the "3" key while the menu screen is displayed, then the "2" key on the remote control unit for servicing. The Extended Self-Test starts. The percentage remaining of the test is displayed on the screen, and the test is terminated when the percentage reaches 00%. Check whether or not an error has occurred after the test is finished. Diagnosis results â&#x20AC;˘ Without an error: ". . . Completed" is displayed. If no error occurs up until this stage, HDD operations are normal except for writing operations. If the unit has a failure in HDD playback, a block other than the HDD may be in failure. If the unit's failure is in HDD recording, however, the next HDD Read/Write Check must be executed to test writing operations. â&#x20AC;˘ With an error: ". . . Error" is displayed. Look at the number in Test Result. If the place value for tens is 1 or 2, execute the Ext Self-Test again. If it is from 3 to 7, the HDD must be replaced. Note: If the result of the second test is the same, replacement of the HDD is required.

Example: No error

Example: With an error

To return to the menu screen, press the "Clear" key.

112

DVR-530H-S 1

Execute the HDD R/W Check. Before executing this test, be sure to obtain your client's consent for erasure of HDD data. Press the "4" key while the menu screen is displayed then the "SKIP ¢" key to start the HDD R/W Check. To stop executing the test (OFF) while it is in progress, press the "SKIP 4" key.

The display on the left indicates the progress of the test. The percentage of the test progress is displayed on the screen, and the test is finished when the percentage reaches 100%.

Detailed description on each item on the screen • Write Error: Number of write errors • Read Error: Number of read errors • Compare Error: Number of comparison errors • Current LBA: The address during testing • Max LBA: Highest address number of the HDD • Progress: Percentage of test progress (%) • Remain Time: Estimated time required for finishing the test across all sectors. Estimated time: 11 hours/160 GB

Diagnosis results • If no error occurs in any of the Write/Read/Compare items, the HDD is in normal condition and is not required to be replaced. A block other than the HDD is in failure. • If any error occurs, the HDD must be replaced.

To terminate the diagnostic program, press the "ESC" key.

113

DVR-530H-S 5

7.1.10 SETUP SEQUENCE Tuner/FL microcomputer

System Codec IC (Initial Program Loader)

DVD-R/RW Drive

Connect the power cord.

System microcomputer starts up.

FLASH check ?

Initialization of the peripheral circuit register and RAM, etc.

LSI check ? Clock displayed on the FL display.

Yes

Yes ATA/ATAPI command processing

Firmware stored in Flash memory is developed in SD-RAM expanding the compressed data.

Has command arrived ?

"LSI NG" displayed on the FL display.

Initialization of the peripheral circuit register and RAM, etc.

Downloading through RS232C required. "MONITOR" displayed on the FL display.

"POWER ON" displayed on the FL display.

Power ON ?

Drive microcomputer starts up.

Yes

Tuner/FL microcomputer starts up.

Jumping to developed firmware.

Power ON/Release the reset

System Codec IC (Firmware)

"POWER ON" displayed on the FL display.

Initialization of the peripheral circuit register and RAM, etc.

Communication start with the Tuner/FL microcomputer.

Obtaining LD temperature data from drive. Is temperature below 59°C?

Waiting for communication to be established. Yes

No System-control computer is turned off (entering standby) following request from Tuner/FL microcomputer

Yes

Key input and channel data transmitted to the system controller. And make displayed data by instructions from the system controller, and switch a channel.

Request for power off of system-control computer made to Tuner/FL microcomputer

Is ID check of drive OK?

No ∗1

Yes

"CPRM ERR" displayed on FL display No

Is starting/ID check of HDD OK?

∗1

Yes

"HDD ERR" displayed on FL display

The version and content of the dictionary data on the hard disk are checked.*

Is disc in?

∗1: If both the drive ID check and starting/ID check of HDD failed, "CPRM ERR" is first displayed on FL display. *Note: The dictionary data for the HDD are stored on the hard disk when the firmware is downloaded. Therefore, when the HDD is replaced, be sure to download the firmware.

Yes

E Is disc valid?

Yes Repair required?

Tray Open

Yes No

Playback requested?

Repair process

Yes Stop

Playback

114

DVR-530H-S 1

7.1.11 DISASSEMBLY Note 1: Do NOT look directly into the pickup lens. The laser beam may cause eye injury. Note 2: Even if the unit shown in the photos and illustrations in this manual may differ from your product, the procedures described here are common. Note 3: For performing the diagnosis shown below, the following jigs for service is required: • Emergency disc ejection rod (GGF1529) • Flexible cable for service (GGD1284), (VKP2291), (GGD1437) • Extension board (GGF1532 (A)), (GGF1532 (B))

Diagnosis of MAIN Assy 1 Bonnet Case S

2 Tray Panel EB

1 2 3 4 5

Remove the four screws.

1 1

Press the STANDBY/ON button to turn on the power. B

Press the OPEN/CLOSE button to open the tray. Remove the tray panel EB. Press the OPEN/CLOSE button to close the tray. Press the STANDBY/ON button to turn off the power.

Rear view

1 5 C

2 3

2 Remove the four screws. Remove the bonnet case S.

How to open the tray when the power cannot be turned on Bonnet case S

2 4 Tray panel EB

3 2

Tray

×2

When the tray cannot be opened because the power cannot be turned on, it can be opened using the emergency disc ejection rod (GGF1529). (A long, thin rod about 1 mm in diameter can be used in place of the rod.) Insert the rod through the slit at the bottom of the unit and slide the projection for cam R9 in the direction of the arrow, using the rod. When the tray is popped out a little, pull it out by hand. Find the projection by inserting the rod through the slit by about 20 mm, as the projection is not visible from the outside. If the insertion of the rod exceeds 20 mm, you cannot catch the projection. Emergency disc ejection rod (GGF1529)

Emergency disc ejection rod (GGF1529)

2 about 5mm about 15mm

Slit of chassis Slit of drive

Projection (slide)

Slit

Cam R9

Bottom view

115

DVR-530H-S 5

3 Front Panel Section

4 HDD and DRIVE Assy R9R HDD

Unhook the four hooks.

1 2 3 4

Disconnect the connector. Disconnect the flexible cable and connectors. Remove the four screws. Remove the HDD.

B JACB Assy

POWER SUPPLY Unit

1 CN101

HDD

Bottom view

CN202 CN3802

ATAB Assy

E 2

DRIVE Assy R9R

Remove the front panel section while disconnect the connector.

1 2 3

FLJBAssy D

Disconnect the flexible cable and connectors. Remove the six screws. Remove the DRIVE Assy R9R.

RSWB Assy

2 CN302

CN1201

2 3

1 E

CN4502

CN3801

Front panel section

2 Acetate tape (*) DRIVE Assy R9R Refer to next page.

MAIN Assy

116

DVR-530H-S 1

5 MAIN Assy

1 2 3 4

6 Diagnosis

Disconnect the connector.

Remove the two tapes.

Disconnect the flexible cable.

Remove the four screws. Stand the MAIN Assy.

DRIVE Assy R9R Bottom view

POWER SUPPLY Unit

DVJB Assy

2 3

CN601

CN4501

4 3 C

Tape SCRB Assy

JACB Assy

Tape

MAIN Assy

H 2 3

Disconnect the flexible cable. Disconnect the connector. HDD D

Note: Acetate tape (*) (former page) When replacing the DRIVE Assy, remove the acetate tape from the old assy and adhere it to the new assy. Without the acetate tape, the performance of the drive cannot be assured. If the tape cannot be reused, be sure to use acetate tape for service (GYH1001).

117

DVR-530H-S 5

4 5 6 7 8 9

Reassembling the front panel section. Connect the flexible cable. Connect the connector and flexible cables from the DRIVE Assy R9R. Connect the two flexible cables for service from the HDD. Connect the two extension boards and flexible cable for service. Arrange the unit as shown in the photo below.

Caution : Main IC (IC1001) on the MAIN Assy will be heated to arround 80 degrees celsius. Be careful when works.

H MAIN Assy Front panel section

CN3802

6 CN3801 6

Extension board (GGF1532 (B))

J IC1001

POWER SUPPLY Unit

CN4501

CN4502

5 4

CN101

CN201

Acetate tape

CN202

Flexible cable for service (GGD1437)

8 CN11

7 DRIVE Assy R9R

Extension board (GGF1532 (A))

Flexible cable for service (VKP2291)

Flexible cable for service (GGD1284)

E ATAB Assy E

HDD

Diagnosis

118

DVR-530H-S 1

Cleanning the Pickup Lens 1 2

5 6 7 8

Remove the two screws. Remove the writer stay L.

Writer stay L

Remove the alminum tape.

Remove the front bezel. Remove the four screws.

8 Bottom view

Alminum tape

Unhook the four hooks.

1 B

Front side

Acetate tape

7 C

Front bezel

6 3 4

Remove the two screws. Remove the writer stay R.

Writer stay R

Remove the one screw.

Remove the top cover.

Top cover

Front side

4 10

9 Acetate tape

119

DVR-530H-S 5

Remove the two screws.

Remove the clamper section.

Clamper section

Clean the pickup lens. Before shipment, be sure to clean the pickup lens, using the following cleaning materials: Cleaning liquid Cleaning paper

: GEM1004 : GED-008

Pickup lens

120

DVR-530H-S 1

7.2 IC • The information shown in the list is basic information and may not correspond exactly to that shown in the schematic diagrams.

List of IC

PMC002A8, LA73026AV, CM0045AF, R8A34011BG-K, BU4828F, R1170S331B, PQ035ZN01ZPH, NJM2861F33, BA25F18WHFP, BD3823FV, LA73031V

PMC002A8 (JCKB ASSY : IC101) • TUNUER Microcomputer Pin Function No.

Pin Name

Signal Name

I/O

Function

PA3/S08

FLDATA

Communication line with FL Driver

PA4/SI8/SB8

FLSTB

Ccommunication strobe line with FL Driver

PA5/SCK8

FLCLK

Communication clock with FL Driver

P70/INTO/TOCLP

WDT

WDT for detection of u-com in the state of out of control

P71/INT1/TOHCP

ACDET

Detection of AC power

P72/INT2/TOIN/TOLCP

HS_MTMOT

Handshaking of system control u-com communication

P73/INT3/TOIN/TOHCP

Pulse input of remote control

RES#

XRESET

Reset input

XT1

Connection of sub clock

XT2

Connection of sub clock

VSS1

GND

−

CF1

Connection of main clock

CF2

Connection of main clock

VDD1

P80/AN0

MODEL1

Analog In Input #1 for model type judgement

P81/AN1

MODEL2

Analog In Input #1 for model type judgement

P82/AN2

KEY1

Analog In Main unit key input #1

P83/AN3

KEY2

Analog In Main unit key input #2

P84/AN4

KEY3

Analog In Main unit key input #3

Active

−

P85/AN5

AGC

Analog In AGC voltage input from tuner

P86/AN6

BATTERY

Analog In Input for battery voltage checking

P87/AN7

FUNC

Analog In

P10/SO0

SDET3

P11/SI0/SB0

SDET2

Detection of S tereminal #2 connection

Detection of S tereminal #3 connection

P12/SCK0

SDET1

Detection of S tereminal #1 connection

P13/SO1

AVLOUT

Input for battery voltage checking

P14/SI1/SB1

SDA

Nch O/D I2C communication (data)

P15/SCK1

SCL

Nch O/D I2C communication (clock)

P16/T1PWML

XSYSRST

IC reset signal of whole system

P17/T1PWMH/BUZ

XVDECRST

Reset signal to VDEC2

PE0/AN12

MUTEV

CVBS, Y/C mute signal for video driver IC

PE1/AN13

COMPMUTE

Y/Cb/Cr mute signal for video driver IC

PE2/AN14

AMUTE1

Audio mute signal of ouput stage

PE3/AN15

INSEL1

Input selection of video selector

PE4

INSEL2

Input selection of video selector

PE5

INSEL3

Input selection of video selector

PE6

YCSEL

CVBS or Y/C selection of video selector

PE7

STBYVS

Standby mode selection of video selector

VSS4

GND

−

VDD4

−

121

DVR-530H-S 5

No. A

Pin Name

Signal Name

I/O

Function

PF0

LET

Letter-box output superimposed signal

PF1

SQU

Squeese output superimposed signal

PF2

RGBSEL

Input RGB selection

PF3

XTUMODE

PF4

PF5

XLPTHRU

PF6

PSMUTE

PF7

XAVLTH

SI2P0/SO2

SI2P1/SI2/SB2

SI2P2/SCK2

SI2P3/SCK2O

RFTHRU

PWM1

PWM0

FANCTRL

VDD2

−

VSS2

GND

−

PO0

P_CONT2

PO1

MUTECTL

PO2

EPGEXT

Equaliser selection of slicer input video

PO3

TUON

Power control for tuner section

PO4

SWVION

Power control for tvideo section

PO5/CKO

P_CONT

Power control for whole system

PO6/T6O

FLON

Power control for FL tube

PO7/T7O

XP_SAVE

P20/INT4/T1IN/TOCLP/TOHCP/INT6 STATCHG

Detection of audio multi-plex status change of MSP

P21/INT4/T1IN/TOCLP/TOHCP

J_CLOCK

Input audio for Just Clock

P22/INT4/T1IN/TOCLP/TOHCP/HCTR CSYNCIN

C-sync for Auto-Rec

P23/INT4/T1IN/TOCLP/TOHCP

P24/INT5/T1IN/TOCLP/TOHCP/INT7 MRST

P25/INT5/T1IN/TOCLP/TOHCP

P26/INT5/T1IN/TOCLP/TOHCP

P27/INT5/T1IN/TOCLP/TOHCP

BLANKIN

P30/PWM4

LEDDVD

DVD indicator

P31/PWM5

LEDHDD

HDD indicator

P32/UTX1

TXD1

Transmission for RS232-C terminal

P33/URX1

RXD1

Reception for RS232-C terminal

P34/UTX2

TXD2

Reservation

P35/URX2

RXD2

Reservation Handshaking of sys con

XCHECKER

S1/S2 selection signal

Through selection of AV.Link communication line

RF through selection of tuner

Rotaion speed control of radiating fan

Detection of attaching the unit checker

Detection of abnormality of Main Board power

AVLIN

Input line of NexTViewLink

P36

HS_TTOM

VDDODA

−

Active

SYS → Tuner

122

DVR-530H-S 1

No.

Pin Name

Signal Name

I/O

Function

Active

Input video for data slicer

PB6/CVD/CSYNC

CVBSIN

VSSVCO

GND

−

PB4/FILTSLC

FILTSLC

VDDVCO

−

PB2

PB1

PB0/DS1FLD

VSS3

GND

−

VDD3

−

PC7/DBGP2

DBGP2

Nch O/D Control port for on-chip debugger

PC6/DBGP1

DBGP1

Nch O/D Control port for on-chip debugger

PC5/DBGP0

DBGP0

Nch O/D Control port for on-chip debugger

PC4/AN10

PC3/AN11

PC2/AN9

PC1/AN8

PC0/OCSYNC

PA0/SO7

SD_TTOM

Communication data line of sys con

Tuner → Sys

PA1/SI7/SB7

SD_MTOT

Communication data line of sys con

Sys → Tuner

SCK_MTOT

Communication clock of sys con

Sys → Tuner

100 PA2/SCK7

External filter for slicer PLL

123

DVR-530H-S 5

LA73026AV (SCRB ASSY : IC801) • Dual SCART Interface IC Pin Function

No.

Pin Name AIN1R AIN1L AIN2R AIN2L AIN3R AIN3L AIN4L AIN4R AIN5L AIN5R EXTCTL1 EXTCTL2 EXTCTL3 EXTCTL4

1 2 10 11 15 16 33 34 36 37 3 4 19 35

VOUT

6 17 27 32 38 7 13 18 23 28

GND GND EXT-75ΩDR-GND DEC-75Ω-GND GND VIN1 VIN2 VIN3 VIN4 VIN5

5.58V

Function Audio input terminal

2.5mA, ON →0.75V

General purpose output Opencollector

OFF →OPEN 1.10V

Video output terminal Push-pull output/Low-impedance

1.8V

Video input terminal Sync-tip clamp Input/Hi-impedance

PWRSAV

0.2V

Power save mode select pin OPEN : L

AUMUTE

0.05V

Control terminal for audio mute OPEN : L

REFFIL

4.94V

Terminal for Ref_DC ripple removing

VCC12

Vcc for audio H : Vcc-0.5V M : 6V L : 0V

FSS control terminal Output H, M, L 3 values with serial control

FSSOUT

DATA

Confirmed to IIC BUS. Data input terminal

CLOCK

Confirmed to IIC BUS. Clock input terminal

24 25 26

VCC5A VOUT75A VOUT75B

29 30 31 42 43

VCC5B AOUT2L AOUT2R AOUT3L AOUT3R

39 40

AOUT1L AOUT1R

41 44

PWRMUTE1 PWRMUTE2

DC Voltage

Control Vcc for Video 1.10V

Video driver output terminal Push-pull output/Low-impedance Always VCC for Video

4.91V

Audio output terminal Push-pull output/Low-impedance

4.91V

Audio output terminal Push-pull output/Low-impedance Output terminal of audio muting

124

DVR-530H-S 1

Block Diagram

125

DVR-530H-S 5

CM0045AF (MAIN ASSY: IC4201) â&#x20AC;¢ Video Decoder A

132 131 130 129 128 127 126 125 124 123 122 121 120 119 118 117 116 115 114 113 112 111 110 109 108 107 106 105 104 103 102 101 100 99 98 97 96 95 94 93 92 91 90 89

VDDI VSS MD[16] MD[17] MA[2] MA[1] MA[0] MA[10] MBA MRAS VDDE VDDI VSS MCAS MDQM MA[3] MA[4] MA[5] MA[6] MA[7] MA[8] MA[9] VDDE VDDI VSS FID VD HD VSS TIN VDDI VSS VDDE RCLKO DOUT[0] DOUT[1] DOUT[2] DOUT[3] DOUT[4] DOUT[5] DOUT[6] DOUT[7] DOUT[8] DOUT[9]

Pin Arrangement (Top view)

VDDE MCLK MWE MD[8] MD[7] MD[9] MD[6] MD[10] MD[5] MD[11] VDDE VSS VDDI MD[4] MD[12] MD[3] MD[13] MD[2] MD[14] MD[1] MD[15] MD[0] VDDE VSS VDDI PDOUT VSS AVSPL0 AVDPL0 CPO VGS XIN XTST VDDE AVD AVS MST SM SININ2 VDDI VSS AVDDA2 VREF2 VRO2

88 87 86 85 84 83 82 81 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45

VSS VDDE VDDI XCS SCL SDATX RX VDDE VSS AVDAD3 VRH3 VRL3 AVSAD3 AVDBF3 CBIN AVSBF3 ATST1 AVSBF2 CO2 CO3 CCRIN AVDBF2 AVDAD2 VRL2 VRH2 AVDAD2 TEST1 TEST0 RESTX VSS DVCK VDDI DIN[0] DIN[1] DIN[2] DIN[3] DIN[4] DIN[5] DIN[6] DIN[7] DIN[8] DIN[9] SEL AS

AOUT2 AVSDA2 AVDDA1 VREF1 VRO1 AOUT1 AVSDA1 AVDPL1 AVSPL1 VDDE SININ1 ITHR VDDI RCLKI SMCK VSS AVDAD0 VRH0 VRL0 AVSAD0 AVDPG0 SYNCIN GIN CO0 AVSPG0 ATST0 AVSPG1 CO1 CVBSIN AVDPG1 AVSAD1 VRL1 VRH1 AVDAD1 VSS VDDI VDDE CLK8 CLK4 GCLP REQ VSS VDDI VDDE

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44

133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176

Pin Function No. Pin Name

I/O

Function

No. Pin Name

I/O

Function

AOUT2

DAC2 analog signal output

AVSPL1

PLL1 GND

AVSDA2

DAC2 GND

VDDE

I/O power supply 1

AVDDA1

DAC1 power supply

SININ1

PLL1 reference input

VREF1

DAC1 reference voltage input

ITHR

Penetration current test pin

VRO1

DAC1 inward current setting pin

VDDI

CORE power supply 1

AOUT1

DAC1 analog signal output

RCLKI

Resampling clock input

AVSDA1

DAC1 GND

SMCK

SCAN test pin

AVDPL1

PLL1 power supply

VSS

Digital GND 1

126

DVR-530H-S 1

No. Pin Name

I/O

Function

No. Pin Name

I/O

Function

AVDAD0

ADC0 power supply

VDDI

CORE power supply 4

VRH0

ADC0 top reference electric potential

DVCK

DVIF clock input

VRL0

ADC0 bottom reference electric potential

VSS

Digital GND4

AVSAD0

ADC0 GND

RESETX

System reset input

AVDPG0

PGA0, CLP0, OFFC power supply

TEST0

Test mode setting 0

SYNCIN

ADC0 analog input

TEST1

Test mode setting 1

GIN

ADC0 analog input

AVDAD2

ADC2 power supply

CO0

PGA0 capacitor connection pin (REF0-synctip)

VRH2

ADC2 top reference electric potential

AVSPG0

PGA0, CLP0, OFFC GND

VRL2

ADC2 bottom reference electric potential

ATST0

Analog test pin

AVSAD2

ADC2 GND

AVSPG1

PGA1, CLP1, OFFC GND

AVDBF2

BUF2.CLP2 power supply

CO1

PGA1 capacitor connection pin (REF1-synctip)

CCRIN

ADC2 analog input

CVBSIN

ADC1 analog input

CO3

PGA3 capacitor connection pin

AVDPG1

PGA1, CLP1, OFFC power supply

CO2

BUF2 capacitor connection pin

AVSAD1

ADC1 GND

AVSBF2

BUF2, CLP2 GND

VRL1

ADC1 bottom reference electric potential

ATST1

Analog test pin

VRH1

ADC1 top reference electric potential

AVSBF3

BUF3, BUFF GND

AVDAD1

ADC1 power supply

CBIN

ADC3 analog input

VSS

Digital GND2

AVDBF3

BUF3.BUFF power supply

VDDI

CORE power supply 2

AVSAD3

ADC3 GND

VDDE

I/O power supply 2

VRL3

ADC3 bottom reference electric potential

CLK8

8fsc clock output for GCR

VRH3

ADC3 top reference electric potential

CLK4

4fsc clock output for GCR

AVDAD3

ADC3 power supply

GCLP

I/O

Clamp pulse output for GCR/FB input

VSS

Digital GND5

REQ

Interrupt signal output

VDDE

I/O power supply 4

VSS

Digital GND3

VDDI

CORE power supply 3

SDATX

I/O

Data for serial communication (I2C: SDA)

VDDE

I/O power supply 3

SCL

Clock for serial communication (I2C: SCL)

Address select input

XCS

SEL

Serial communication mode setting

VDDI

CORE power supply 5

DIN[9]

Digital data input (MSB)

VDDE

I/O power supply 5

DIN[8]

Digital data input

VSS

Digital GND6

DIN[7]

Digital data input

DOUT[9]

Digital data output (MSB)

DIN[6]

Digital data input

DOUT[8]

Digital data output

DIN[5]

Digital data input

DOUT[7]

Digital data output

DIN[4]

Digital data input

DOUT[6]

Digital data output

DIN[3]

Digital data input

DOUT[5]

Digital data output

DIN[2]

Digital data input

DOUT[4]

Digital data output

DIN[1]

Digital data input

DOUT[3]

Digital data output

DIN[0]

Digital data input (LSB)

DOUT[2]

Digital data output

127

DVR-530H-S 5

No. Pin Name

I/O

Function

No. Pin Name

I/O

Function

DOUT[1]

Digital data output

137 MD[7]

I/O

SDRAM data bus

DOUT[0]

Digital data output (LSB)

138 MD[9]

I/O

SDRAM data bus

RCLKO

Resampling clock output

139 MD[6]

I/O

SDRAM data bus

100 VDDE

I/O power supply 6

140 MD[10]

I/O

SDRAM data bus

101 VSS

Digital GND7

141 MD[5]

I/O

SDRAM data bus

102 VDDI

CORE power supply 6

142 MD[11]

I/O

SDRAM data bus

103 TIN

Control input of data output timing

143 VDDE

I/O power supply 10

104 VSS

Digital GND8

144 VSS

Digital GND12

105 HD

H drive output

145 VDDI

CORE power supply 10

106 VD

I/O

V drive output (MD[19])

146 MD[4]

I/O

SDRAM data bus

107 FID

I/O

Field ID output (MD[18])

147 MD[12]

I/O

SDRAM data bus

108 VSS

Digital GND9

148 MD[3]

I/O

SDRAM data bus

109 VDDI

CORE power supply 7

149 MD[13]

I/O

SDRAM data bus

110 VDDE

I/O power supply 7

150 MD[2]

I/O

SDRAM data bus

111 MA[9]

SDRAM address output

151 MD[14]

I/O

SDRAM data bus

112 MA[8]

SDRAM address output

152 MD[1]

I/O

SDRAM data bus

113 MA[7]

SDRAM address output

153 MD[15]

I/O

SDRAM data bus (MSB)

114 MA[6]

SDRAM address output

154 MD[0]

I/O

SDRAM data bus (LSB)

115 MA[5]

SDRAM address output

155 VDDE

I/O power supply 11

116 MA[4]

SDRAM address output

156 VSS

Digital GND13

117 MA[3]

SDRAM address output

157 VDDI

CORE power supply 11

118 MDQM

SDRAM DQM output

158 PDOUT

Phase comparison output

119 MCAS

SDRAM CAS output

159 VSS

Digital GND14

120 VSS

Digital GND10

160 AVSPL0

PLL0 GND

121 VDDI

CORE power supply 8

161 AVDPL0

PLL0 power supply

122 VDDE

I/O power supply 8

162 CPO

PLL0 Charge Pump output

123 MRAS

SDRAM RAS output

163 VGS

GND for PLL0 guard band

124 MBA

SDRAM bank address output

164 XIN

27MHz clock input

125 MA[10]

SDRAM address output (MSB)

165 XTST

SCAN test pin

126 MA[0]

SDRAM address output (LSB)

166 VDDE

I/O power supply 12

127 MA[1]

SDRAM address output

167 AVD

PLL2 power supply

128 MA[2]

SDRAM address output

168 AVS

PLL2 GND

129 MD[17]

I/O

(SDRAM data bus)

169 MST

SCAN test pin

130 MD[16]

I/O

(SDRAM data bus)

170 SM

SCAN test pin

Digital GND11

171 SININ2

PLL2 reference input

131 VSS

132 VDDI

CORE power supply 9

172 VDDI

CORE power supply 12

133 VDDE

I/O power supply 9

173 VSS

Digital GND15

134 MCLK

SDRAM clock output

174 AVDDA2

DAC2 power supply

135 MWE

SDRAM WE output

175 VREF2

DAC2 reference voltage input

136 MD[8]

I/O

SDRAM data bus

176 VRO2

DAC2 inward current setting pin

128

DVR-530H-S 1

HDD

DVD-R / RW

DVD-R / RW Drive

CPU

SRAM

FLASH

AV Dec.

DDR

DDR I / F

Video Processor

Audio I / F

N / P Enc.

R8A34011BG

Video DAC

Audio DAC

Audio ADC

Y/C N / P Dec.

1394Phy

DDR

DDR I / F

Stream Processor

AV Enc.

1394Link DV-Decorder

5 7 8

R8A34011BG-K (MAIN ASSY : IC1001) â&#x20AC;¢ System Codec A

Block Diagram

DVR-530H-S

129

BU4828F (MAIN ASSY : IC3706) • Reset IC

Pin Discription Block Diagram

No.

VDD 2

1 VOUT

– + Vref

Pin Name

I/O

Function

VOUT

Output Pin

VDD

Power Supply Input pin

N.C.

−

N.C.

GND

−

GND pin

3 N.C.

GND

R1170S331B (MAIN ASSY : IC4506) • Regulator IC Pin Discription

Block Diagram

No. 1 VOUT

VDD 6

– +

Current Limit Thermal Shutdown

I/O

Function

VOUT

VR Output Pin

GND

−

GND pin

CE.

Cjip Enable ("H" active)

N.C.

−

N.C.

2 GND

GND

−

GND pin

5 GND

VDD

Power Supply Input pin

4 NC

Vref

Pin Name

PQ035ZN01ZPH (MAIN ASSY : IC4509) • Regulator IC Block Diagram VIN : DC Input

VB : Bias Power Supply

Exclusive IC

Vo : DC Output

Vadj. : Output Voltage adjust

GND : Ground

130

DVR-530H-S 1

NJM2861F33 (MAIN ASSY : IC4512) • Regulator IC A

Block Diagram

VIN 5

4 VOUT

CONTROL 1

Thermal Protection

3 NOISE BYPASS Bandgap Reference

GND 2 B

BA25F18WHFP (MAIN ASSY : IC4571) • Dual Low-Dropout Voltage Regulator Block Diagram GND(FIN) VCC1

VCC1

EN1

C VCC1

Reference Voltage EN1

Current Limit

EN2

Sat. Prevention

VCC2

EN2

VCC2

Current Limit

Thermal Shutdown

Sat. Prevention

EN1 VCC1 VCC2 GND VO2 VO1 EN2

131

DVR-530H-S 5

BD3823FV (JACB ASSY : IC103) • Audio Sound Processor

Tuner2 4 EXT11 5 EXT12 6 EXT21 7 EXT22 8 EXT31 9 EXT32 10

110k 110k

18 OUT2

0~-30.5dB/ 0, 5dB step -∞

110k

Tuner1 3

19 OUT1

17 VCC

VCC

110k

MS2 2

20 SELECT

16 VRR

110k

MS1 1

1/2 VCC

15 FILTER

110k

SELECT OUT1 OUT2 VCC VRR FILTER AGND SCL SDA DGND

14 AGND

AGND

110k

20 19 18 17 16 15 14 13 12 11

0~-30.5dB/ 0, 5dB step -∞

110k

1 2 3 4 5 6 7 8 9 10

GAIN SELECTOR 0, 2, 4, 6dB

13 SCL

I2C LOGIC

12 SDA

110k

Front1 Front2 Tuner1 Tuner2 EXT11 EXT12 EXT21 EXT22 EXT31 EXT32

110k

Block Diagram

Pin Layout (Upper view)

11 DGND DGND

Pin Discription No.

Pin Name

Function

I/O

MS1

Music server input terminal

MS2

Music server input terminal

Tuner1

Tuner input terminal of ch1

Tuner2

Tuner input terminal of ch2

EXT11

External 1 input terminal of ch1

EXT12

External 1 input terminal of ch2

EXT21

External 2 input terminal of ch1

EXT22

External 2 input terminal of ch2

EXT31

External 3 input terminal of ch1

10 EXT32

External 3 input terminal of ch2

11 DGND

−

Ground terminal

12 SDA

I2C BUS data terminal

13 SCL

I2C BUS clock terminal

14 AGND

−

GND terminal

15 FILTER

1/2 VCC terminal

16 VRR

Ripple rejection filter terminal

17 VCC

−

Power supply terminal

18 OUT2

Volume output terminal of ch2

19 OUT1

Volume output terminal of ch1

20 SELECT

Slave address selection terminal

132

DVR-530H-S 1

LA73031V (JACB ASSY : IC401) â&#x20AC;¢ Video Input selector A

Block Diagram

CVBS-IN4 1

44 CVBS-IN3

V-DET-CTL 2

SYNCTIP CLAMP

CVBS-IN5 3

SYNCTIP CLAMP

COMPONENT-H 4

43 V-DET OUT 42 CVBS-IN2

BUF

SYNCTIP CLAMP

0/6dB AMP

SYNCTIP CLAMP

LPF ON/OFF

41 VCC1

N.C. 5

SYNCTIP CLAMP

40 CVBS-IN1

Cb-IN 6

PEDESTAL CLAMP

39 V-DET-FIL

GAIN-CTL 7 C-IN1/Cr-IN1 8 YOUT-SEL 9 C-IN2 10 VCC4 11 C-IN3 12 GND4 13

38 CVBS-OUT/Cb-OUT CLAMP PLS-GEN SYNC LPF CLAMP

SYNC SEP

CLAMP PULSE

37 GND1

V.SYNC SEP

Sensitivity adjustment

36 V.SYNC OUT

C.SYNC OUT

35 VCC3

PEDESTAL CLAMP

V-DET

34 C.SYNC OUT

BIAS

BUF 0/6dB AMP

BIAS

LPF ON/OFF

33 V-DET-IN

BIAS

32 GND3

BIAS

C-IN4 14 REG 15

31 C-OUT/Cr-OUT SYNC LPF CLAMP

SYNC SEP

30 VCC2

C-IN5 16

29 Y-OUT

INSEL1 17

SYNCTIP CLAMP

Y-IN1 18

SYNCTIP CLAMP

INSEL2 19 Y-IN2 20

SYNCTIP CLAMP

28 LPF-CTL BUF 0/6dB AMP

LPF ON/OFF

27 GND2 26 Y-IN5

SYNCTIP CLAMP

25 TEST MODE-CTL

SYNCTIP CLAMP

INSEL3 21

24 Y-IN4

Y-IN3 22

23 STAND-BY-H

The parts connected by wide lines operate even at standby mode. E

133

DVR-530H-S 5

7.3 CAUTIONS ON HANDLING THE HDD (1) Cautions on Handling the HDD A

• The HDD is very sensitive to shocks and vibrations. Care must be taken especially during operation (when the power is on). • The HDD is very sensitive to electrostatic charges. • Rapid change in temperature or humidity may cause deterioration of the HDD. Note: After receiving damage caused by any above-mentioned factors, the HDD may operate normally for dozens or some hundreds of hours but then suddenly crash. If you are certain you have damaged a new repair part (HDD) while making repairs, do not use the part. The HDD is about 10 times as sensitive to shock during operation than during nonoperation. Reference: Main specifications on damage to the HDD

Shock G (acceleration) Temperature change Moisture change

During operation

During nonoperation

<approx. 20 G

<approx. 200 G

Reference: Estimate value of falling distance vs. shock (G) when the HDD is dropped without protection Falling distance

< 15°C/hour < 20%/hour

Landing Granite surface surface

Concrete Synthetic-resin- Antistatic coated table floor sponge

0.5 inch / 12.7 mm

387

217

200

1.0 inch / 25.4 mm

595

457

310

26 37

2.0 inch / 50.8 mm

1133

600

680

4.0 inch / 101.6 mm

1795

1040

1050

267

(2) Cautions on handling the product on which the HDD is mounted or the HDD as a repair part, and examples of dangerous handling [Cautions on handling the product on which the HDD is mounted] • While the unit is turned on, the HDD is always in operation. Be sure NOT to impart shock to the unit.

÷ Examples of dangerous handling: while the power is on • Bumping on the bonnet • Dropping an object, such as a small screwdriver or remote control unit, onto the bonnet, or bumping an object against the cabinet • Moving the unit by dragging • Stacking another product on the unit Note: Be sure NOT to impart shock, such as bumping or hitting a screwdriver against the HDD, during diagnosis with the bonnet open. ÷ Examples of dangerous handling: while the power is off • Imparting strong shock, although the HDD is more resistant to shock when the power is off • Dropping the unit from a height of several centimeters, or after lifting one side of the unit up, then letting the unit drop.

• Do NOT move the unit immediately after the power is turned off. Wait at least 30 seconds after the indication on the FL display changed from POWER OFF to the clock indication before moving the unit. If the AC power cord is accidentally disconnected before turning the unit off, wait at least for one minute before moving it. In this case, damage to the HDD caused by sudden shutoff may be small, because the emergency relief mechanism is activated. However, if sudden shutoff occurrs during recording or playback, recorded data may be damaged. Be sure to check operations. [Cautions on handling the HDD as a repair part] 1. Handle the HDD in a safe environment: • Handle the HDD over an antistatic pad that can also absorb shock. • Wear wrist bands to prevent electrostatic charges generated in your body from affecting the HDD.

2. The following must be observed when handling the HDD: • Handle one HDD at a time. Do NOT hold several HDDs at the same time. • Grip the HDD on both sides so that you do not touch its terminals or circuit boards. • Do NOT stack one HDD onto another HDD (even if the HDDs are protected in antistatic bags). • Do NOT bump the HDDs against one another. • Do NOT bump any tool, such as a screwdriver, or other hard object against the HDD. • When a repair part (HDD) is transported and there is a large temperature difference between outdoors and indoors, to the indoor, leave it in its package for about a half day to gradually cool or warm the HDD to room temperature before unpacking it. [Notes on packing for shipment] • When returning a defective HDD for analysis, handle with care as if it were a good product. Otherwise, the results of analysis may not be correct. • When packing, use the antistatic bag and packing materials in which the repair part for service was delivered. Attach a copy of the slip for service or a memo stating symptoms in as much detail as possible.

134

DVR-530H-S 1

Outline and part No. of the HDDs

*Pioneer's part No. is not stamped.

Western Digital Model Name

Capacity

DVR-530H-S DVR-530H-AV

160GB

DVR-630H-S

Pioneer's Manufacture's Part No. Part No. (for service)

SEAGATE Pioneer's Manufacture's Part No. Part No. (for service)

VXF1047

WD1600BB

VXF1040

VXF1068

WD1600BB

VXF1086

VXF1049

WD2500BB -xxGUAx

VXF1072

WD2500BB -xxGUCx

ST316002xACE

250GB

VXF1082

ST325082xACE

â&#x20AC;˘ When replacing the HDD, carefully check the capacity and manufacturer's part No. on the part label to avoid replacing with a similar but inappropriate product. You can also check the model No. of the mounted HDD on the Service mode screen. â&#x20AC;˘ Do NOT use repair parts, such as commercially available HDDs, other than those designated above, as their functions, performance or reliability cannot be guaranteed.

Western Digital(160G, 250GB)

Seagate

C Capacity

Capacity

Manufacturer's part No.

Date of Manufacturer

Confirmation of the jumper pin location of the HDD Western Digital

Seagate

Jumper pin Jumper pin

Setting : Cable Select(CS)

Setting : Cable Select(CS) F

135

DVR-530H-S 5

7.4 DISC/CONTENT FORMAT A

Disc / content format playback compatibility

systems are both compatible with this recorder. Multi-session playback: Yes (except CD-Audio and Video CD/Super VCD) Unfinalized disc playback: CD-Audio only

General disc compatibility This recorder is compatible with a wide range of disc types (media) and formats. Playable discs will generally feature one of the following logos on the disc and/or disc packaging. Note however that some disc types, such as recordable CD and DVD, may be in an unplayable format−see below for further compatibility information. DVD-Video DVD-R DVD-RW

Compressed audio compatibility Compatible media: CD-ROM, CD-R, CD-RW Compatible formats: MPEG-1 Audio Layer 3 (MP3), Windows Media Audio (WMA) Sampling rates: 44.1 or 48kHz Bit-rates: Any (128Kbps or higher recommended) Variable bit-rate (VBR) MP3 playback: Yes

VBR WMA playback: No Audio CD Video CD

CD-R

WMA encoder compatibility: Windows Media Codec 8 (files encoded using Windows Media Codec 9 may be playable but some parts of the specification are not supported; specifically, Pro, Lossless, Voice and VBR)

CD-RW

Also compatible with KODAK Picture CD

is a trademark of DVD Format/Logo Licensing Corporation. is a trademark of Fuji Photo Film Co. Ltd. C

This recorder also supports the IECís Super VCD standard. Compared to the Video CD standard, Super VCD offers superior picture quality, and allows two soundtracks to be recorded. Super VCD also supports the widescreen size.

DRM (Digital Rights Management) file playback: No (see also DRM in the Glossary on page 121) File extensions: .mp3, .wma (these must be used for the recorder to recognize MP3 and WMA files − do not use for other file types) File structure: Up to 99 folders / 999 files (if these limits are exceeded, only files and folders up to these limits are playable)

WMA (Windows Media Audio) compatibility

VIDEO

Super Video CD (Super VCD)

The Windows Media logo printed on dicates that this recorder can playback Windows Media Audio content.

DVD-R/RW compatibility This recorder will play and record DVD-R/RW discs. Compatible media: D

DVD-RW Ver. 1.1, Ver. 1.1 / 2x, Ver. 1.2 / 2−4x and Ver. 1.2 / 2−6x DVD-R Ver. 2.0 and Ver. 2.0 / 4x / 8x / 16x, and Ver. 2.1 1−8x / 1−16x Recording formats: DVD-R/RW: Video Recording (VR) format and DVDVideo format (Video mode)

WMA is an acronym for Windows Media Audio and refers to an audio compression technology developed by Microsoft Corporation. WMA content can be encoded by using Windows Media Player for Windows XP, Windows Media Player 9 or Windows MediaPlayer 10 series.

Microsoft, Windows Media, and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries.

Readable formats: DVD-R/RW: Video Recording (VR) format and DVDVideo format (Video mode) E

Note that older models of DVD recorders and DVD writers may reject DVD-RW Ver. 1.2 discs and/or corrupt the data on the disc. If you want to share DVD-RW discs between this recorder and an older recorder/writer, we recommend using Ver. 1.1 discs.

Compatible formats: Baseline JPEG and EXIF 2.2* still image files *File format used by digital still cameras Sampling ratio: 4:4:4, 4:2:2, 4:2:0 Horizontal resolution: 160 − 5120 pixels Vertical resolution: 120 − 3840 pixels Progressive JPEG compatible: No

CD-R/RW compatibility This recorder cannot record CD-R or CD-RW discs. Readable formats: CD-Audio, Video CD/Super VCD, ISO 9660 CD-ROM* containing MP3, WMA or JPEG files * ISO 9660 Level 1 or 2 compliant. CD physical format: Mode1, Mode2 XA Form1. Romeo and Joliet file

JPEG file compatibility

136

File extensions: .jpg, .jpeg, .jif, .jfif (must be used for the recorder to recognize JPEG files − do not use for other file types) File structure: The recorder can load up to 99 folders / 999 files at one time (if there are more files/folders that this on the disc then more can be reloaded)

DVR-530H-S 1

PC-created disc compatibility Discs recorded using a personal computer may not be playable in this unit due to the setting of the application software used to create the disc. In these particular instances, check with the software publisher for more detailed information.

Discs recorded in packet write mode (UDF format) are not compatible with this recorder. Check the DVD-R/RW or CD-R/RW software disc boxes for additional compatibility information.

137

DVR-530H-S 5

8. PANEL FACILITIES 8.1 FRONT SECTION Front panel

OPEN/CLOSE

HDD/DVD

ONE TOUCH COPY

PULL-OPEN

REC

STANDBY/ON

13 12 11 10

1 STANDBY/ON Press to switch the recorder on/into standby.

8 +/â&#x20AC;&#x201C; Use to change channels, skip chapters/tracks, etc.

9 REC Press to start recording. Press repeatedly to set the recording time in 30 minute blocks.

Disc tray

3 OPEN/CLOSE Press to open/close the disc tray. 4 HDD/DVD indicator Lights blue when the HDD is selected; orange when DVD is selected. C

5 HDD/DVD Press to switch between the hard disk drive (HDD) and DVD for recording and playback. 6

Front panel display and IR remote sensor

7 Front panel inputs Pull the cover down where indicated to access the front panel input jacks (audio, video and DV). Especially convenient for connecting camcorders and other portable equipment.

10 Press to stop recording. 11 ONE TOUCH COPY Press to start One Touch Copy of the currently playing title to DVD or the HDD. See also the Note on copying. 12 Press to stop playback. 13 Press to start or restart playback.

138

DVR-530H-S 1

8.2 REAR PART Rear panel connections A

AV 2 (INPUT 1/DECODER) R L

AV 1 (RGB) − TV L

COMPONENT VIDEO OUT PB Y

AC IN G-LINK CONTROL

DIGITAL OUT

IN ANTENNA

OUT

OPTICAL

AUDIO

6 7 8

VIDEO S-VIDEO INPUT 3

AUDIO

VIDEO S-VIDEO OUTPUT

10 B

8 DIGITAL AUDIO OUT Optical digital audio jack for connecting to an AV amplifier/receiver, Dolby Digital/DTS/MPEG decoder or other equipment with a digital input.

1 AV2(INPUT 1/DECODER) AV connector Audio/video input/output SCART-type AV connector for connecting to a VCR, or other equipment with a SCART connector. The input accepts video, S-video and RGB. See AV2/L1 In for how to set this up. 2 AV1(RGB)-TV AV connector Audio/video output SCART-type AV connector for connecting to a TV or other equipment with a SCART connector. The video output is switchable between video, S-video and RGB. See page AV1 Out for how to set this up. 3 COMPONENT VIDEO OUT A high-quality video output for connecting to a TV or monitor with a component video input.

10 OUTPUT Stereo analog audio, video and S-video outputs for connection to a TV or AV amplifier/receiver.

Front panel connections

4 ANTENNA IN (RF IN)/OUT Connect your TV antenna to the ANTENNA IN (RF IN) jack. The signal is passed through to the ANTENNA OUT jack for connection to your TV. 5

9 INPUT 3 Stereo analog audio, video and S-video inputs for connection to a VCR or other source component.

AC IN – Power inlet DV IN

6 G-LINK™ Use to connect the supplied G-LINK cable to enable GUIDE Plus+ to control an external satellite receiver, etc.

7 CONTROL IN Use to control this recorder from the remote sensor of another Pioneer component with a CONTROL OUT terminal and bearing the Pioneer mark. Connect the CONTROL OUT of the other component to the CONTROL IN of this recorder using a mini-plug cord.

S-VIDEO

VIDEO L(MONO) R AUDIO INPUT 2

On the right side of the front panel a flip-down cover hides more connections. 11 DV IN A DV input i.LINK connector, suitable for connecting a DV camcorder. 12 Audio/video input 2 Audio/video input (stereo analog audio; composite and S-video video), especially suitable for camcorders, game consoles, portable audio, etc.

139

DVR-530H-S 5

8.3 DISPLAY Display A

2 3

L R P

1 Lights during playback; blinks when playback is paused. B

2 Lights when copying.

XP Lights when the recording mode is set to XP (best quality).

3 Lights during recording; blinks when recording is paused.

SP Lights when the recording mode is set to SP (standard play).

LP / SLP Lights when the recording mode is set to LP (long play) or SLP (super long play).

Lights when a timer recording has been set. (Indicator blinks if the timer has been set to DVD but there isn't a recordable disc loaded, or the timer has been set to HDD but the HDD is not recordable.)

EP / SEP Lights when the recording mode is set to EP (extended play) or SEP (super extended play).

NTSC Lights when playing NTSC format video.

MN Lights when the recording mode is set to MN (manual recording level) mode.

Indicates which channels of a bilingual broadcast are recorded.

Lights when the component video output is set to progressive scan.

7 R / RW Indicates the type of recordable DVD loaded: DVD-R or DVD-RW.

OVER Lights when the analog audio input level is too high.

VPS / PDC Lights when receiving a VPS/PDC broadcast during a VPS/PDC-enabled timer recording.

Recording quality indicators

Character display

PL Lights when a VR mode disc is loaded and the recorder is in Play List mode. 23 Shows the remote control mode (if nothing is displayed, the remote control mode is 1). V Lights when an unfinalized Video mode disc is loaded.

140

DVR-530H-S 1

8.4 REMOTE CONTROL Remote control

9 CH +/– Press to change the channel of the built-in TV tuner.

2 STANDBY/ON ONE TOUCH COPY

3 5

HDD

DVD ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

10 GUIDE Plus+®Action buttons and DVD playback functions When in the GUIDE Plus+  system, these buttons act as the Red, Green, Yellow and Blue Action buttons (the functions of these buttons change according to the GUIDE Plus+  Area.

OPEN/CLOSE

INPUT SELECT

4 6 7 9

AUDIO Changes the audio language or channel. (When the recorder is stopped, press to change the tuner audio.)

CLEAR

CLEAR AUDIO SUBTITLE ANGLE

PLAY MODE

DISC NAVIGATOR

12 ENTER HOME MENU

RETURN

14 GUIDE

REV SCAN

PAUSE

INFO

HELP

DISPLAY

PLAY

STOP OK

BACK

FWD SCAN

ANGLE Switches camera angles on discs with multi-angle scenes.

SKIP

PLAY MODE Press to display the Play Mode menu (for features such as search, repeat and program play).

CASE PREV SELECTION NEXT STEP/SLOW

REC STOP REC

REC MODE TIMER REC

11 DISC NAVIGATOR / TOP MENU TV CONTROL

TV/DVD

INPUT CHANNEL VOLUME TV DIRECT REC SELECT

Press to display the Disc Navigator screen, or the top menu if a DVD-Video disc is loaded.

12 MENU Press to display the disc menu if a DVD-Video disc is loaded.

DVD RECORDER

When in the GUIDE Plus+  system, use to jump directly to the Menu bar.

1 ONE TOUCH COPY Press to start One Touch Copy of the currently playing title to DVD or the HDD.

13 / / / and ENTER Used to navigate all on-screen displays. Press ENTER to select the currently highlighted option.

2 Remote control indicator Lights when setting up the remote control for use with a TV and when setting the remote control mode

4 OPEN/CLOSE Press to open/close the disc tray.

15 RETURN Press to go back one level in the on-screen menu or display.

5 HDD Press to select the hard disk (HDD) for recording or playback.

16 GUIDE Plus+® system controls GUIDE Press to display the GUIDE Plus+ screen; press again to exit.

6 DVD Press to select the DVD for recording or playback. 7 INPUT SELECT Press to change the input to use for recording. 8 Alphanumeric buttons, + and CLEAR Use the number buttons for track/chapter/title selection; channel selection, and so on. The same buttons can also be used to enter names for titles, discs and so on. Use the + button to enter non-alphanumeric characters and symbols. Use CLEAR to clear an entry and start again.

INFO Press to see additional information for the highlighted item in GUIDE Plus+ . 17 HELP Press for help on how to use the current GUI screen 18 DISPLAY Displays/changes the on-screen information displays.

141

DVR-530H-S 6

14 HOME MENU Press to display the Home Menu, from which you can navigate all the functions of the recorder.

3 STANDBY/ON Press to switch the recorder on/into standby.

SUBTITLE Displays/changes the subtitles included in multilingual DVD-Video discs.

TOP MENU

19 Playback controls REV SCAN / FWD SCAN

Press to start reverse or forward scanning. Press again to change the speed.

PLAY Press to start playback. PAUSE Press to pause playback or recording. STOP Press to stop playback. CM BACK (commercial back) Press repeatedly to skip progressively backward through the audio or video playing.

CM SKIP (commercial skip) Press repeatedly to skip progressively forward through the audio or video playing.

PREV / NEXT Press to skip to the previous or next title/chapter/ track/folder; or to display the previous or next menu page. When GUIDE Plus+ď&#x203A;&#x161; is displayed, use to display the previous/next page. STEP/SLOW During playback, press to start slow-motion playback; while paused, press to show the previous or next video frame.

When GUIDE Plus+ď&#x203A;&#x161; is displayed, use to display the previous/next day. 20 Recording controls REC Press to start recording. Press repeatedly to set the recording time in blocks of 30 mins. D

STOP REC Press to stop recording. REC MODE Press repeatedly to change the recording mode (picture quality). TIMER REC Press to set a timer recording from the GUIDE Plus+ď&#x203A;&#x161; system. 21 TV CONTROL After setting up, use these controls to control your TV.

22 TV/DVD Press to switch between 'TV mode', in which you get the picture and sound from the TVĂs tuner, and 'DVD mode', in which you get picture and sound from the recorderĂs tuner (or an external input). 23 TV DIRECT REC Press to start recording whatever channel your TV is set to. F

142

DVR-530H-S 1

143

DVR-530H-S 5

7 Jigs list A

Name Service Remote Control Unit DVD Test Disc (DVD-Video) DVD Recorder Data Disc Flexible Cable (28P) ATA cable 4P Power Cable Extension Board (A)(B) Emergency Disc Ejection Rod Acetate Tape

Jig No. GGF1381 GGV1025 GGV1239 (*) GGD1437 GGD1284 VKP2291 GGF1532 GGF1529 GYH1001

Remarks adjustment, diagnosis Check of DVD-Video diagnosis (ID data setting) diagnosis of MAIN Assy Extension of HDD Extension of HDD diagnosis of MAIN Assy Forced ejection of the Disc Performance keeping of DRIVE Assy

(*) GGV 1239 wii be available on June 2005. For servicing until June 2005, use GGV1179 disc.

Before shipping out the product, be sure to clean the following positions by using the prescribed cleaning tools: Position to be cleaned Pickup lenses

Cleaning tools Cleaning liquid : GEM1004 Cleaning paper : GED-008

Position to be cleaned Fans

Cleaning tools Cleaning paper : GED-008

144

DVR-530H-S 1