WITHOUT LEVELER...........................................................................................................................1

WARNING

Do not walk on machine surfaces with steel cleated foot wear. Steel cleats on steel surfaces are slippery and do not provide a safe foot hold.

WARNING

It is not recommended to walk on machine surfaces that are not designated walking areas. No attempt should be made to walk on angled steel surfaces or surfaces that are irregular in shape. Walking surfaces on the machine must be covered with anti-slip materials to provide a safe foot hold and prevent slipping. These anti-slip surfaces should be maintained on a regular basis. If the surface shows signs of wear, the anti-slip material must be replaced immediately.

To reduce risk of fire, machines should be completely cleaned of debris at least daily, particularly around the engine exhaust components. Hydraulic oil leaks, excess grease, fuel and oil accumulation (including spillage) should be eliminated immediately, always turn OFF the engine before cleaning the machine. Maintain a clean cab interior, clear away trash or debris. The machine should be washed completely at every major service. Inspect the machine daily for signs of damage or unusual wear, to structures. Check for fluid leaks, or faulty operation. Repair or replace malfunctioning parts and systems immediately. Check windows and door guards for damage. Check protective windows for cracks, a damaged window has reduced strength at stopping objects. All damaged windows must be replaced with original equipment. Check windows for scratching, crazing and cloudiness that could impair visibility. Do not operate the machine with any defective or inoperable components. Check all fluid levels. Do not operate the machine with any of the exhaust system, safety covers, oil shields, or other devices removed.

Keep a first aid kit in an easily accessible location on the vehicle at all times.

WORKING WITH OIL

Direct contact with oil implies a risk of skin complaints e.g., eczema. Strict hygiene should always be observed. Some advice which should be observed: • Oils used in this machine may be hot enough to cause serious burns. • Avoid contact with oil, particularly heated oil. • Oil on the skin should be washed off immediately with soap and water. • Wear protective gloves. Hands should be clean before putting on gloves. Apply protective cream to the hands to make washing easier. • Don't put oily rags in your pockets. • Oil soiled clothing should be changed as soon as possible. • Always keep a change of clothing, but not in the machine where it can become dirty. • Cuts and abrasions must be attended to immediately. Clean them and apply first-aid. • Avoid breathing in oil fumes. • Wash hands and arms frequently, e.g., at each meal break. • Oily rags and gloves must be safely discarded after use. Read, understand and follow all general safety precautions specified by the saw head manufacturer.