FLUID INJECTION INJURY....................................................................................................................1

WHEN PARKING THE MACHINE:

Park the machine at least 15 m (50 ft) away from other equipment and in a cleared area. In the event of a fire, this distance will minimize the chance of the fire spreading to other equipment. Before leaving the operator's cab, lower the saw head onto the ground. If out of the operator's cab for an extended period turn OFF the engine.

STICK CYLINDERS FULLY EXTENDED

860C-001 TIP OF STICK BOOM FULLY SUPPORTED

1. Park the machine on level ground with the attachment resting firmly on the ground. 2. Apply the swing brake. 3. Turn OFF the engine. 4. Remove the ignition key.

5. Turn OFF the battery disconnect switch. NOTE: Wait 30 seconds after turning OFF the engine before turning off the battery disconnect switch. If the battery disconnect is turned off before this time period the engine electronic control unit (ECU) will register a fault.

24863A

OFF ON

24863A R0

Tigercat 845C/L845C Feller Buncher TRANSPORTING THE MACHINE

When transporting the machine watch that enough clearance is available on both sides and above the machine or any of its attachments to avoid contact with power or telephone lines, bridge structures, etc. Before transporting the machine check to ensure that all doors, panels and access covers are installed properly and secured. Improperly secured doors or panels pose a serious danger to pedestrians and other vehicles.

WARNING

DO NOT operate this machine to lift or move any objects other than what it is designed to lift or move. • Do not use the boom to service other equipment. • Do not use the boom to lift items such as tires, engines, cylinders, boom components, etc. • Do not modify the boom system. • Do not add hooks or lugs to the boom for the purpose of attaching lifting rigging. • Do not use the attachment for any purpose other than the intended function. Maintain a safe operating distance between the machine and workers and all other personnel. It is the duty of the operator to ensure that no person approach the machine while in use. Failure to follow the above instructions could result in serious injury or death..