Frames

TUBE CONNECTOR

Molded tube connector with slim collar for high load-bearing capacity and at the same time optimized stackability.

GUSSED PLATE

Welded corner reinforcement allows play-free fastening of vertical diagonals as well a double coupling connection.

RAIL HOUSINGS

Guard rail support with new, improved wedge geometry for secure positive and non-positive reception of up to two back guard rails.

TOE BOARD HOLDER

Integrated deck fastening protection with toe board holder. Position and geometry ensure a reliable of the lift-off preventer of scaffold decks. A part dismantling of the scaffold is possible at any time.

ASSEMBLY FRAME STEEL 1-BOARD

–Steel tube Ø 48.3 mm, hot dip galvanized –U-profile to mount the decks

Height (m) 0.66 1.00 2.00 Width (m) 0.36 0.36 0.36 Weight (kg) 8.60 10.60 18.30 PU (pcs.) 66 44 22 Article no. 000605 000604 000876

ASSEMBLY FRAME ALUMINUM 70 ASSEMBLY FRAME 70/100 FOR ROOF OVERHANG

Price (€) 68.40 70.40

73.30

–Aluminum tube Ø 48.3 mm –U-profile to mount the decks –Low dead weight with high strength at the same time

Height (m) 0.66 1.00 1.50 2.00 Width (m) 0.73 0.73 0.73 0.73 Weight (kg) 4.20 5.40 7.70 8.60 PU (pcs.) 66 44 22 22 Article no. 000459 000864 002818 000863 Price (€) 66.30 79.40 94.80

99.50

–Steel tube Ø 48.3 mm, hot dip galvanized –U-profile to mount the decks –For converting roof overhangs and building protrusions –Above this frame up to four further scaffold levels are possible

Height (m) 2.00 2.00 Width (m) 0.73 1.09 Weight (kg) 22.00 24.00 PU (pcs.) 22 22 Article no. 000862 000452 Price (€) 131.30 143.70

Z

Z

Z

ROOFGUARD FRAME

–Steel tube Ø 48.3 mm, hot dip galvanized –For broadening the scaffold UC 70 by one deck width –Particularly suitable for the construction of roof scaffolding according to DIN 4420 –The transition from UC 70 to UC 100 is easily possible

Height (m) 2.00 Width (m) 1.09/0.73 Weight (kg) 24.50 PU (pcs.) 22 Article no. 011034 Price (€) 89.60

THROUGH-PASSAGE FRAME 1.50 M

–Steel tube Ø 48.3 mm, hot dip galvanized –Passage for pedestraines and pedestrian protection –Tube connector for frame widths 0.73 and 1.09 m which can be mounted in different ways –The reinforcment in longitudinal direction is performed by system diagonals in connection with horizontal braces

Height (m) 2.20 Width (m) 1.50 Weight (kg) 31.50 PU (pcs.) 20 Article no. 003152 Price (€) 184.00

THROUGH-PASSAGE FRAME 1.09 M

–Steel tube Ø 48.3 mm, hot dip galvanized –Passage width 1.00 m for narrow mounting suface –Four outer rail housings increase the passage width –The additionally mounted tube connector enables a continuous construction with the frame 0.73 m and 1.09 m width

Height (m) 2.20 Width (m) 1.09 Weight (kg) 30.70 PU (pcs.) 22 Article no. 010933 Price (€) 179.00

Z

Z

Z

STEEL DECK OPTI-LINE 0.32 M

–Steel, hot dip galvanized –Extremely robust, for the toughest operations –Non-slip surface through pronounced hole profiling –Reducing the wall thickness and optimized hole profiling leads to weight savings –Good stackability due to the guide grooves at the edges –Complies with the requirements of DIN EN 12811 –Can be used in guard and roofguard scaffolds as per DIN 4420 –Point welded

Length (m) 0.73 1.09 1.57 2.07 2.57 3.07 Width (m) 0.32 0.32 0.32 0.32 0.32 0.32 Weight (kg) Load class PU (pcs.) Article no. Price (€) 5.60 6 60/80 008770 47.60 7.70 6 60/80 008771 48.50 10.90 6 60/80 008772 49.90 13.90 6 60/80 008773 55.90 16.90 5 60/80 008774 64.60 19.80 4 60/80 008775 73.30

STEEL DECK 0.32 M

–Steel, hot dip galvanized –Extremely robust, for the toughest operations –Non-slip surface through pronounced hole profiling –Good stackability due to the guide grooves at the edges –Complies with the requirements of DIN EN 12811 –Can be used in guard and roofguard scaffolds as per DIN 4420

Length (m) 2.57 3.07 4.14 Width (m) 0.32 0.32 0.32 Weight (kg) Load class PU (pcs.) Article no. Price (€) 19.70 5 60/80 008764 65.70 23.30 4 60/80 008765 74.20 31.00 3 60/80 008766 146.20

STEEL DECK 0.19 M

–Steel, hot dip galvanized –Levelling deck for closing gaps in staging scaffolding and brackets –Non-slip surface through pronounced hole profiling –Good stackability due to the guide grooves at the edges

Length (m) 0.73 1.09 1.57 2.07 2.57 3.07 Width (m) 0.19 0.19 0.19 0.19 0.19 0.19 Weight (kg) 4.20 6.40 8.50 10.60 12.70 15.90 Load class 6 6 6 6 5 4 PU (pcs.) 60/80 60/80 60/80 60/80 60/80 60/80 Article no. Price (€) 008780 36.00 008781 40.00 008782 42.00 008783 49.50 008784 57.80 008785 67.10

Z

Z

Z