Smc barnum catalog 2014 by H. H. Barnum

Barnum

Common SMC Product Guide

Table of Contents

800.695.3055

Fittings and Tubing Polyurethane and Nylon Tubing One-Touch Fitting

TIUB/TU & TIA/T....................................................... Page 1 KQ2 ........................................................................... Page 2

Air Preparation Units Particulate Filter AF..............................................................................Page 3 AFM............................................................................Page 4 Mist Separator AFD .............................................................................Page 5 Micro Mist Filter Regulator AR..............................................................................Page 6 Filter/Regulator AW............................................................................. Page 7 Lubricator AL ..............................................................................Page 8 Modular F.R.L. Unit AC ............................................................................. Page 9 Spacers and Brackets AC...............................................................................Page 10 Accessories AC...............................................................................Page 11 Soft Start Lockout AVL...............................................................................Page 12 Pressure Relief 3 Port Valve with Locking HolesVHS...............................................................................Page 13 Custom HHB air prep assemblies HHB ............................................................................. Page 14 Electro pneumatic regulator ITV...............................................................................Page 16 Digital flow switch/meter PF2A...............................................................................Page 17 Digital pressure/vacuum switch ISE40A/ZSE40A...............................................................................Page 18 Digital pressure switch ISE70...............................................................................Page 19

Valves & Manifolds 5-port Solenoid Valve 5-port Solenoid Valve Serial Interface

HHB complete manifold assemblies

VQC ............................................................................Page 20 to 22 SV...............................................................................Page 23 to 25 EX250 ...................................... ..................................Page 26 EX260...................................... ..................................Page 27 to 30 EX500...................................... ..................................Page 31 EX600...................................... ..................................Page 32 to 36 How to order ............................................................. Page 37 to 38

Clamps 25mm bore power clamp Power clamp 40,50,63,80 bore

CKZT............................................................................Page 39 to 41 CKZT/CKZ2N....................................................................Page 42 to 43

Cylinder/Actuator Stainless Steel Body Cylinder NFPA Interchangeable Air Cylinder Compact Cylinder Compact Cylinder Compact Guide Cylinder Rotary Clamp Cylinder Air Slide Table Grippers Rotary Table/Rack-and-Pinion Type

NCM ...........................................................................Page 44 NCA1...........................................................................Page 45 NCQ8 .........................................................................Page 46 CQ2Z .........................................................................Page 47 MGP-Z. .......................................................................Page 48 MK2T............................................................................Page 49 MX .............................................................................Page 50 to 51 MH ..............................................................................Page 52 to 57 MSQ ...........................................................................Page 58

Accessories Speed Control Silencer Pilot operated check valves Balluff cylinder switches

AS ..............................................................................Page 59 to 61 AN ..............................................................................Page 62 to 63 VQ ..............................................................................Page 64 to 67 BMF..............................................................................Page 68 to 69

Specialty Section Technical data Line Card

..............................................................................Page 70 to 72 ..............................................................................Page 73 to 74

Polyurethane & Nylon Tubing How to Order

800.695.3055

Polyurethane Tubing TU (Metric)

TIUB (Inch)

TIUB 05 BU Size (Inch) 01 See Note* 05 07 See Note* 11 13

1/8" 5/32” 3/16" 1/4" 5/16” 3/8" 1/2"

TU 0604 BU

Size (mm)

Length per roll 20 33 153 305

0425 0604 0805 1065 1208

66ft 100ft 500ft 1000ft

* For 5/32” and 5/16” size tubing, please refer to 4mm and 8mm “How to Order” information right.

Blue Area: Typically Shipped from Barnum Stock

Length per roll

4mm (5/32”) 6mm 8mm (5/16”) 10mm 12mm

Color indication

Color indication Blue

BR1 Brown (solid)

Red (solid)

Clear

Green (solid)

TR Red

Red

TR Green

Silver

White

Neon Green

Yellow (solid)

Yellow

Dark Green

TR Yellow

Black

GR1 Gray (solid)

Neon Yellow

Green

GR2 Lt. Gray (solid)

Orange

YR1 TR Orange

Neon Pink

BU2 TR Blue

PU1 Purple (solid)

BU3 Med Blue

PU2 TR Purple

20 33 100 153 305 500

20m 33m Note 1) 100m 153m Note 1) 305m 500m Note 2)

Note1) Available only for 0425 and 0805 Note 2) Available only for 0425 0604 and 0805

BU1 Blue (solid)

YR2 Neon Orange

Nylon Tubing T (Metric)

TIA (Inch)

TIA 07 B

1/8" 5/32” 3/16" 1/4" 5/16” 3/8" 1/2"

* For 5/32” and 5/16” size tubing, please refer to 4mm (T0425) and 8mm (T0806) “How to Order” information at right.

Length per roll

Tube diameter 01 See Note* 05 07 See Note* 11 13

T 0604 B

33 153 305

100ft 500ft 1000ft

Tube diameter 0403 0425 0604 0645 0806 1075 1209 1613

Color indication B

Black

Blue

Clear

Green

Red

White

Yellow

Color indication

Yellow Area: Typically Shipped from SMC Stock

4mm 4mm (5/32”) 6mm 6mm 8mm (5/16”) 10mm 12mm 16mm

Length per roll 20 33 100 153

20m 33mNote 1) 100m 153mNote 1)

Note1) Available only for 0425 and 0806.

One-Touch Fitting How to Order

800.695.3055

Unifit Thread

KQ2 H

U01

NPT/PT Thread

KQ2 H

One touch fitting

Tube O.D.

Model Prefix

*H *K *L LE LF LU C D E F N N P R *S T TW U UD

VD VF VS VT

*W X XD Y Z ZD ZF ZT

Description Male connector Straight union Different dia. straight union 45º Male elbow Male elbow Union elbow Plug-in elbow Reducer elbow Bulkhead elbow Female elbow Branch union elbow Branch elbow Tube cap Color cap Delta Delta union Bulkhead union Bulkhead female union Female connector Nipple Different dia. nipple Adaptor Plug Plug-in reducer Hex. socket head male connector Branch tee Union cross Union “Y” Branch “Y” Double branch Different dia. double union “Y” Universal male elbow Double universal male elbow Universal female elbow Hex. socket head universal elbow Triple universal male elbow Extended male elbow Extended plug-in elbow Different dia. branch “Y” Double branch “Y” Male run tee Double branch universal elbow Branch universal elbow Branch universal female elbow Triple branch universal elbow

* Available Unifit Models Blue Area: Typically Shipped from Barnum Stock Yellow Area: Typically Shipped from SMC Stock

01 03 05 07 09 11 13

Inch 1/8” 5/32” 3/16” 1/4” 5/16” 3/8” 1/2”

** 23 04 06 08 10 12 16

Metric 3.2mm 4mm 6mm 8mm 10mm 12mm 16mm

Sealant Nil S

Without sealant With sealant (male thread only, except M5)

**Not available for Unifit

Connections Type Tube unions

"XX”

Plug-in

Reducer plug-in

Tube (rod) Different dia. tube (reducer)

Threaded pipe

Thread

Unifit Thread Option

03 05 07 09 11 13 06 08 10 12 16 32 33 34 35 36 37 M5 M6 01 02 03 04 U01 U02 U03 U04

Description Prefix Tubing of equal H, L, T, U, E O.D. diameter Fitting plug-in to L, U fitting of equal O.D. 5/32” 3/16” L, R 1/4” 5/16” 3/8” 1/2” 6mm 8mm H, T, U, X, N 10mm 12mm 16mm 10-32 UNF Thread 1/16” NPT 1/8” NPT H, L, W, T, Y, U, E 1/4” NPT 3/8” NPT 1/2” NPT M5 x 0.8 M6 x 1.0 PT1/8 PT1/4 PT3/8 PT1/2 Uni 1/8 Uni 1/4 H, K, L, S, T, Uni 3/8 U, V, W, Y Uni 1/2

Unifit thread ridge shape. A gasket made of a stainless sheet covered with laminated NBR on both sides is seated on the chamfer of a female thread for a perfect sealing construction irrespective of the difference in thread diameters due to the difference in the types of female threads, variation in tolerance, or difference in the size of chamfer. (It is applicable to any female thread with an ordinary chamfer.)

8 Gasket

Female thread Uni thread

Rc, G NPT, NPTF

Modular Filter Unit 5 micron particulate fliter

800.695.3055

How to Order

AF 30

N 03 BD 2R

Air filter

Optional specifications

Body size

Symbol

10 20 30 40 50 60

Description

Nil

Thread type Nil

Metric thread (M5) Rc

N Note 1)

NPT

F Note 2)

Note 1) Drain guide is NPT1/4 (applicable to AF30 to 60), and the exhaust port for auto drain comes with ø3/8" One-touch fitting (applicable to AF30 to 60). Note 2) Drain guide is G1/4 (applicable to AF30 to 60).

With metal bowl guard

Metal bowl

AF30 to 60 AF10 to 60

Nylon bowl

AF10 to 60

Metal bowl with level gauge

AF30 to 60

With bowl guard

AF10 to 20 AF30 to 60

J Note 1) Drain guide 1/4 R

Flow direction: Right to left

AF10 to 60

Drain cock with barb fitting: ø6 x ø4 nylon tube

AF30 to 60

Display units for product name plate and caution plate for bowl : PSI, °F

AF10 to 60

Note 2)

Port size Symbol Port 10 20 size – M5 M5 1/8 – 01 1/4 – 02 – 3/8 – 03 – 1/2 – 04 – 3/4 – 06 – 1 – 10

Applicable models

When more than one specification is required, indicate in ascending numerical then alphabetical order. Note 1) Without a valve function. Note 2) For thread types M5 and NPT.

30 40 50 60 – –

– – –

– –

– – – – –

– – – – – –

Accessories Symbol

–

Description —

Nil

Applicable model Accessory Stand alone bracket assembly (1)

Applicable models — AF20 to 60

With bracket

Float type AF10 to 60 auto drain (N.C.)

Float type auto drain (N.O.) AF30 to 60

AF10

AF20

AF30

AF40

AF40-06

AF50

AF60

—

AF20P-050AS

AF30P-050AS

AF40P-050AS

AF40P-070AS

AF50P-050AS

AD38 AD38N(3) AD48 AD48N(3) AD48 AD48N(3) AD48 AD48N(3) AD48 AD48N(3) — — N.C. AD37 AD37N(3) AD47 AD47N(3) AD47 AD47N(3) AD47 AD47N(3) AD47 AD47N(3) AD27 AD17 Note 1) Assembly includes a bracket and 2 mounting screws. Note 2) Minimum operating pressure: N.O. type–0.1 MPa; N.C. type–0.1 MPa (AD17/27) and 0.15 MPa (AD37/47). Note 3) When “N” is specified in the end of part number of auto-drain, applicable tubing O.D should be ø3/8".

Float type (2) auto-drain

Blue Area: Typically Shipped from Barnum Stock

N.O.

Yellow Area: Typically Shipped from SMC Stock

Modular Mist Separator Filter .3 micron coalescer filtration

800.695.3055

How to Order

AFM 30

Mist Seperator

Optional specifications Symbol

Body size

Nil

20 30 40

With metal bowl guard

AFM30to 40

Metal bowl

AFM20 to 40

Nylon bowl

AFM20 to 40

Metal bowl with level gauge

AFM30, 40

With bowl guard

AFM20

Note 1)

Drain guide 1/4

AFM30, 40

Flow direction: Right to left

AFM20 to 40

Thread type Nil

N Note 1)

NPT

F Note 2)

Note 1) Drain guide is NPT1/4 (applicable to AFM30 and 40), and the exhaust port for auto drain comes with ø3/8" One-touch fitting (applicable to AFM30 and 40).

Applicable models

Description

Note 2)

Drain cock with barb fitting: ø6 x ø4 nylon tube Display units for product name plate and caution plate for bowl: PSI, °F

AFM30, 40 AFM20 to 40

When more than one specification is required, indicate in ascending numerical then alphabetical order.

Note 2) Drain guide is G1/4 (applicable to AFM30 and 40).

Note 1) Without a valve function. Note 2) For NPT thread type.

Port size

Accessories

Symbol Port 20 30 40 size – – 1/8 01 1/4 02 – 3/8 03 – – 1/2 04 – – 3/4 06

Symbol

—

Nil

* Bracket is not assembled and is supplied loose at the time of shipment.

Applicable models —

Description

With bracket

AFM20 to 40

Float type auto drain (N.C.)

AFM20 to 40

Float type auto drain (N.O.)

AFM30, 40

Accessory Part No. Applicable model Accessory Stand alone bracket assembly

Float type auto-drain (2)

(1)

N.O. N.C.

AFM20 AF20P-050AS — AD27

AFM30 AF30P-050AS

AD38 AD37

AD38N(3) AD37N(3)

AFM40

AFM40-06

AF40P-050AS

AF40P-070AS

AD48 AD47

AD48N(3) AD48 AD47N(3) AD47

AD48N(3) AD47N(3)

Note 1) Assembly includes a bracket and 2 mounting screws. Note 2) Minimum operating pressure: N.O.. type-0.1 MPa; N.C. type-0.1 MPa (AD17/27) and 0.15 MPa (AD37/47). Note 3) When “N” is specified in the end of part number of auto-drain, applicable tubing O.D should be ø3/8".

Blue Area: Typically Shipped from Barnum Stock

Yellow Area: Typically Shipped from SMC Stock

Modular Micro-Mist Filter .01 micron coalescer filter

800.695.3055

How to Order

AFD 30

Micro-mist Seperator

Optional specifications Symbol

Body size

Nil

20 30 40

With metal bowl guard Metal bowl

AFD30 to 404

2 6

Nylon bowl

AFD 20 to 40

Metal bowl with level gauge

AFD 30, 40

With bowl guard

AFD 20

Note 1)

Drain guide 1/4

AFD 30, 40

Flow direction: Right to left

AFD 20 to 40

Thread type Nil

N Note 1)

NPT

F Note 2)

Note 1) Drain guide is NPT1/4 (applicable to AFD30 and 40), and the exhaust port for auto drain comes with ø3/8" One-touch fitting (applicable to AFD30 and 40).

Note 2)

AFD 30, 40 AFD 20 to 40

Note 2) For NPT thread type.

Accessories

Symbol Port 20 30 40 size – – – –

Drain cock with barb fitting: ø6 x ø4 nylon tube Display units for product name plate and caution plate for bowl: PSI, °F

Note 1) Without a valve function.

Port size 1/8 1/4 3/8 1/2 3/4

AFD 20 to 40

When more than one specification is required, indicate in ascending numerical then alphabetical order.

Note 2) Drain guide is G1/4 (applicable to AFD30 and 40).

01 02 03 04 06

Applicable models

Description

Symbol

–

—

Nil

– –

Applicable models —

Description

With bracket

AFD20 to 40

Float type auto drain (N.C.)

AFD20 to 40

Float type auto drain (N.O.)

AFD30, 40

Accessory Part No. Applicable model Accessory Stand alone bracket assembly

Float type

auto-drain (2)

(1)

N.O. N.C.

AFD20 AF20P-050AS — AD27

AFD30 AF30P-050AS

AD38 AD37

AD38N(3) AD37N(3)

AFD40 AF40P-050AS

AD48 AD47

AFD40-06 AF40P-070AS

AD48N(3) AD48 AD47N(3) AD47

AD48N(3) AD47N(3)

Blue Area: Typically Shipped from Barnum Stock

Yellow Area: Typically Shipped from SMC Stock

Modular Regulator How to Order

800.695.3055

AR 30

BE 1N

X465A

Regulator With digital pressure switch with display Body size

Symbol

10 20 25 30 40 50 60

Built-in check valve with backflow mechanism Nil K

Standard Backflow mechanism

N F

- ML)

Note) X465 only available with Bracket (B) X465 not available AR10 and "N" or "F" thread type

Optional specifications

AR10 comes with a backflow mechanism as a standard feature.

Nil

(ISE30-01-

Output specifications — NPN output PNP output 1 to 5V output 4 to 20mA output

Nil X465A X465B X465C X465D

Thread type

Symbol

Metric thread (M5) Rc NPT G

Nil 1 Note 1) N R Y

Port size

Symbol Port 10 20 25 30 40 50 60 size – – – – – – M5 M5 – – – – – 1/8 – 01 – – 1/4 – 02 – – – 3/8 – 03 – – – – – 1/2 – 04 – – – – 3/4 – 06 – – – – 1 – 10

Note 2)

— 0.02 to 0.2MPa setting Non-relieving Flow direction: Right to left Regulator handle "UP" position

Applicable models — AR10 to 60, AR20K to 60K AR10 to 60, AR20K to 60K AR10 to 60, AR20K to 60K AR10 to 60, AR20K to 60K

Display units for product name plate and pressure gauge: PSI, °F

AR10 to 60, AR20K to 60K

Description

When more than one specification is required, indicate in ascending numerical then alphabetical order. Note 1) The only difference from the standard specifications is the adjusting spring for the regulator. It does not restrict the setting of 0.2MPa or more. Note 2) For M5 and NPT thread types.

Accessories Symbol

Description

— Nil B Note 1) With bracket With square embedded type pressure gauge (with limit indicator) E

Note 2)

With round pressure gauge (without limit indicator) With round pressure gauge (with limit indicator) Panel mount (with set nut)

Applicable models — AR10 to 60, AR20K to 60K AR20 to 60, AR20K to 60K AR10 AR20 to 60, AR20K to 60K AR10 to 40, AR20K to 40K

Note 1) Bracket assembly is not mounted at the time of shipment, but rather packaged together with the regulator. Note 2) Mounting threads for pressure gauge: AR10–1/16; AR20 to 30–1/8; AR40 to 60–1/4. Pressure gauge is not mounted at the time of shipment, but rather packaged together with the regulator.

Accessory Part No. Applicable model

AR10

Accessory Stand alone bracket assembly (1)

AR25

AR30

AR40

AR40-06

AR50

AR60

AR10P-270AS AR20P-270AS AR25P-270AS AR30P-270AS AR40P-270AS AR40P-270AS AR50P-270AS (5) AR50P-270AS (5) AR10P-260S

Set nut

AR20 AR20P-260S

AR25P-260S

AR30P-260S

AR40P-260S

— (6)

Gauges - screw in type Pressure Range Metric Gauge - Japan 0~1MPa Metric Gauge - US sourced 0~1MPa North American Gauge 0~160 psi

AR10/AW10 G27-10-R1

AR20/AW20

AR25

AR30/AW30

G36-10-01

K40-MP1.0-01MS G27-P10-R1-X30

K40-MP1.0-01MS K40-MP1.0-01MS

AR40/AW40 AR40-06/AW40-06

AR50

G36-10-02

K40-MP1.0-01MS

K50-MP1.0-02MS

AR60/AW60 G36-10-02 K50-MP1.0-02MS

K40-MP1.0-N01MS K40-MP1.0-N01MS K40-MP1.0-N01MS K40-MP1.0-N01MS K50-MP1.0-N02MS K50-MP1.0-N02MS K50-MP1.0-N02MS

Gauges - embedded type Pressure Range

Metric Gauge 0~1MPa North American Gauge 0-160 psi

AR10/AW10

AR20/AW20

AR25

AR30/AW30

AR50

AR60/AW60

GC3-10AS

GC3-P10AS

AR40/AW40 AR40-06/AW40-06

Blue Area: Typically Shipped from Barnum Stock

Yellow Area: Typically Shipped from SMC Stock

Modular Filter/Regulator 5 micron particulate filtration How to Order

800.695.3055

AW 30

N 03 BE

X465A With digital pressure switch with display

Filter regulator

Symbol

10 20 30 40

With back flow mechanism Nil K

Optional specifications

Note) AW10 comes with a back flow mechanism as a standard feature. If the set pressure is below 0.15MPa, back flow may not occur. When a back flow mechanism is required with a set pressure of less than 0.15MPa, contact SMC.

Symbol

N Note 1)

NPT

F Note 2)

Note 1) Drain guide is NPT 1/4 (applicable to AW30K and 40K), and the exhaust port for auto drain comes with ø3/8" One-touch fitting (applicable to AW30K and AW40K). Note 2) Drain guide is G 1/4 (applicable to AW30K and AW40K).

Note 3)

Port size Symbol Port 10 20 30 40 size – – – M5 M5 – – 1/8 – 01 1/4 – 02 – 3/8 – 03 – – 1/2 – 04 – – 3/4 – 06

Applicable models AW30, AW60 AW10, AW20 (K) to 40 (K) AW10, AW20 (K) to 40 (K) AW10, AW20 (K) to 40 (K) AW30 (K), 40 (K) AW20 (K) AW30 (K), 40 (K) AW10, AW20 (K) to 40 (K) AW10, AW20 (K) to 40 (K) AW30 (K), 40 (K)

Description

Nil 1Note 1) 2 6 8 C JNote 2) N R W

Thread type

Nil

With metal bowl guard 0.02 to 0.2MPa setting Metal bowl Nylon bowl Metal bowl with level gauge With bowl guard Drain guide 1/4 Non-relieving Flow direction: Right to left Drain cock with barb fitting: ø6 x ø4 nylon tube Display units for product name plate, caution plate for bowl, and pressure gauge: PSI, °F

AW10, AW20 (K) to 40 (K)

Accessories Description

Symbol Nil B Note 1) C D E G Note 2) H

— With bracket Float type auto drain (N.C.) Float type auto drain (N.O.) With square embedded type pressure gauge (with limit indicator) With round pressure gauge (without limit indicator) With round pressure gauge (with limit indicator) Panel mount (with set nut)

Applicable models — AW10, AW20 (K) to 40 (K) AW10, AW20 (K) to 40 (K) AW30 (K), 40 (K) AW20 (K) to 40 (K) AW10 AW20 (K) to 40 (K) AW10, AW20 (K) to 40 (K)

Note 1) Bracket assembly is not mounted at the time of shipment, but rather packaged together with the filter regulator for shipment. Note 2) Mounting threads for pressure gauge: AW20K to 30K–1/8; AW40K–1/4. Pressure gauge is not mounted at the time of shipment, but rather packaged together with the filter regulator for shipment.

Accessory Part No. Applicable model Accessory

Stand alone bracket assembly

(1)

Set nut (5)

-ML)

Note) X465 only available with (B) Bracket

Standard Backflow mechanism

Float type auto-drain

(ISE30-01-

Output specifications

Nil With metal bowl guard NPN output X465A PNP output X465B 1 to 5V output X465C 4 to 20mA output X465D

Body size

N.O. N.C.

AW10

AW20

AW30

AW40

AW40-06

AR10P-270AS AR10P-260S — AD17

AW20P-270AS AR20P-260S — AD27

AR30P-270AS AR30P-260S AD38 AD38N(6) AD37 AD37N(6)

AR40P-270AS AR40P-260S AD48 AD48N(6) AD47 AD47N(6)

Gauges - screw in type Pressure Range Metric Gauge - Japan 0~1MPa Metric Gauge - US sourced 0~1MPa North American Gauge 0~160 psi

AR10/AW10 G27-10-R1

AR20/AW20

AR25

AR30/AW30

G36-10-01

K40-MP1.0-01MS G27-P10-R1-X30

K40-MP1.0-01MS K40-MP1.0-01MS

AR40/AW40 AR40-06/AW40-06 G36-10-02 K40-MP1.0-01MS

AR50

G36-10-02

K50-MP1.0-02MS

G36-10-02 K50-MP1.0-02MS

K40-MP1.0-N01MS K40-MP1.0-N01MS K40-MP1.0-N01MS K40-MP1.0-N01MS K50-MP1.0-N02MS K50-MP1.0-N02MS K50-MP1.0-N02MS

Note 1) Assembly includes a bracket and set nuts. Note 2) in part numbers for a round pressure gauge indicates a type of connection thread. No indication is necessary for R; however, indicate N for NPT. Please contact SMC regarding the connection thread NPT and supply of the pressure gauge for PSI unit specifications. Note 3) For 1 MPa. Note 4) Includes one O-ring and 2 mounting screws. Note 5) Minimum operating pressure: N.O. type–0.1 MPa; N.C. type–0.1 MPa (AD17/27) and 0.15 MPa (AD37/47). Please contact SMC regarding the specifications for PSI unit and °F. Note 6) When “N” is specified in the end of part number of auto-drain, applicable tubing O.D should be ø3/8".

Blue Area: Typically Shipped from Barnum Stock

AR60/AW60

Yellow Area: Typically Shipped from SMC Stock

Modular Lubricator How to Order

800.695.3055

AL 30

Lubricator Body size

Optional specifications

10 20 30 40 50 60

Symbol Nil 1 10 11 2 3 6 8 C R 3W ZNote)

Thread type Nil N F

Metric thread (M5) Rc NPT G

Port size Symbol Port 10 20 size – M5 M5 1/8 – 01 1/4 – 02 – 3/8 – 03 – 1/2 – 04 – 3/4 – 06 – 1 – 10

30 40 50 60 – –

– –

– – –

– – – – –

Description Metal Bowl Guard 1000cm tank 1000cm tank with level switch (lowest limit ON) 1000cm tank with level switch (lowest limit OFF) Metal bowl With drain cock Nylon bowl (including sight dome) Metal bowl with level gauge With bowl guard Flow direction: Right to left Drain cock with barb fitting: ø6 x ø4 nylon tube Display units for product name plate and pressure gauge: PSI, °F

Applicable models AL30 to 60 AL30 to 60 AL30 to 60 AL30 to 60 AL10 to 60 AL10 to 60 AL10 to 60 AL30 to 60 AL20 AL10 to 60 AL30 to 60 AL10 to 60

When more than one specification is required, indicate in ascending numerical then alphabetical order. Note) For M5 and NPT thread types.

– – – – – –

Accessory Symbol Description — Nil

With bracket

Applicable models

— AL20 to AL 60

Accessory Part No. Accessory

Applicable model

Stand alone bracket assembly

Note)

AL10 —

AL20

AL30

AL40

The part number for bracket assembly for 1000 cm3 is AF50P-050AS (applicable to AL30 to AL60). Note) Assembly includes a bracket and 2 mounting screws.

Blue Area: Typically Shipped from Barnum Stock

AL40-06

AL50

AL60

AF20P-050AS AF30P-050AS AF40P-050AS AF40P-070AS AF50P-050AS AF50P-050AS

Yellow Area: Typically Shipped from SMC Stock

Modular F.R.L Series AC

How to Order

800.695.3055

AC 30 A

N 03 DE KV

Z Option

F.R.L. unit

Symbol Nil

Body size

1 (11) 2 3 6 8 C J (12) N R

10 20 25 30 40 50 55 60

Model combination Combination

Symbol

Filter Mist Air filter Regulator Lubricator regulator separator

Nil A B C D

(1)

(2)

(3)

—

(2)

(1)

—

(1)

(2)

—

(1)

(3)

—

(2)

—

(1)

(2)

Note 1) The number inside ( ) indicates the combination order counted from the inlet side.

Thread type

N (2) F (3)

Note 2) Drain guide is NPT 1/4 (applicable to AC25 to 60), and the exhaust port for auto-drain comes with ø3/8" One-touch fitting (applicable to AC25 to 60). Note 3) Drain guide is G 1/4 (applicable to AC25 to 60).

M5 01 02 03 04 06 10

M5 1/8 1/4 3/8 1/2 3/4 1

— — — — — —

20 —

25 — —

— — — —

— — —

30 — —

— — —

40 — —

50 — — — — —

Description

Nil

—

C D E G

(5)

60 — — — — — —

Description

Check valve

T-interface

Residual pressure relief 3 port valve

Applicable model —

Float type auto-drain (N.C.) (4)

AC10

to 60

Float type auto-drain (N.O.) (4)

AC25

to 60

With square embedded type pressure gauge (With limit indicator) AC20

to 60

With round pressure gauge (With limit indicator)

to 60

AC10

to 60

Nylon bowl

AC10

to 60

Metal bowl with level gauge

AC25

to 60

With bowl guard

AC10 to 20

Drain guide 1/4

AC10

to 60

Non-relieving type

AC10

to 60

Left

AC10

to 60

Drain cock with barb fitting: ø6 x ø4 nylon tubing

AC25

to 60

Name plate, caution plate for bowl, and AC10 pressure gauge in imperial units (PSI, °F)

to 60

Flow direction: Right

Attachment mounting position

—

Port size for intermediate air release —

AC10 to 50

AC20 : 1/4

AC20 to 50

AC40

: 1/2

AC20 to 50

AC50

:1”

AC20 AC25 AC30 AC40

: 1/8 : 1/4 : 1/4 : 3/8

Applicable model

AC30 : 3/8

AF + AR + [K] + AL

AC20 to 40

AW + [K] + AL

AC20A to 40A

—

With round pressure gauge (Without limit indicator)

AC10

None — Soft Start A1 with Lockout AF+ AR + AL+ A1 Soft Start A2 with lockout & 24V AF+ AR + AL+ A2 electric over ride Soft Start A3 with lockout & 110V AF+ AR + AL+ A3 electric over ride

Accessory Symbol

Metal bowl

Nil

Body size

AC30 to 60 AC10 to 60

Lubricator with drain cock

Attachment Symbol

Port size Port Symbol size

Applicable model

When more than one specification is required, indicate in ascending alphanumeric order. Note 11) The only difference from the standard specifications is the adjusting spring for the regulator. It does not restrict the setting of 0.2 MPa or more. Note 12) Without a valve function.

Metric system thread (M5) Rc NPT G

Nil

Description With metal bowl guard 0.02 to 0.2 MPa setting

AC10 AC20

AC10 AC20 AC25 AF + [T] + AR AC10B to 60B AC30 AC40 AF + AFM + [T] + AR AC20C to 40C AC50 AC60 AF + AR + AL + [V] AC20 to 50

AF + [T] + AR + AL

AC10 to 60

AW + AL + [V]

AC20A to 40A

AF + AR + [V]

AC20B to 50B

Note 4) Applicable tubing O.D for auto-drain connection should be ø3/8" in case NPT thread port is chosen. Note 5) Mounting thread for pressure gauge: 1/16 for AC10; 1/8 for AC20 to 30; 1/4 for AC40 to 60 Pressure gauge is not mounted and is supplied loose at the time of shipment. Blue Area: Typically Shipped from Barnum Stock Yellow Area: Typically Shipped from SMC Stock

Residual

AC20D to 40D

[V] + AF + AR K AC20B to 50B

V1 pressure relief [V] + AF + AFM + AR K AC20C to 40C 3 port valve

—

AF + AFM + AR + [V] AC20C to 40C AW + AFM + [V]

to 60

: M5 x 0.8 : 1/8 : 1/4 : 1/4 : 3/8 : 3/8 : 1/2

—

[V] + AW K + AFM AC20D to 40D

Note 6) When more than one attachment is required, order in alphabetical order. Note 7) Piping adapter, pressure switch with piping adapter, and cross interface need to be ordered separately. Note 8) Please contact SMC when using a pressure switch and T-interface together for AC B. Note 9) The bracket position varies depending on the Tinterface or pressure switch mounting. Refer to the table on page 14-2-30 for standard bracket position. Note 10) With this combination, regulators and filter regulators will be “with back flow function” type. For safety, check that the outlet pressure is exhausted and is atmospheric pressure by pressure gauge.

Spacers and Brackets Series AC

800.695.3055

Spacer (X) C

Center of F.R.L. body

RELEASE

X-X

Y200 X

Y400 Model Y100 Y200 Y300 Y400 Y500

A 6 3 4 5 5

B 27 35.5 47 57 61

C 15 18.5 26 31 33

D 33 48 59 65 70

Y600

75.5

Seal

Applicable model AC10, AC10A, AC10B AC20 AC25 , AC30 AC40 AC40 -06 AC50, AC55, AC60 AC50B, AC55B, AC60B

A Spacer width

Replacement parts Description

Material

Seal

HNBR Note 2)

Y100 Y100P-060AS Note 1)

Part no. Y300 Y400 Y300P-060S Y400P-060S

Y200 Y200P-060S

Y500 Y500P-060S

Y600 Y600P-060S

Note 1) Y-100 comes with 2 O-rings. Note 2) NBR seal is used for Y100 spacer because of no direct contact with fluid.

Spacer with Bracket (Z) øG

Y400T

Y200T

RELEASE

EE (Y100T, Y200T only)

BB (Y100T, Y200T only)

Center of F.R.L. body

Seal

F H Model Y100T Y200T Y300T Y400T Y500T Y600T

A 6 3 4 5 5 6

B — — 82 96 96 120

BB 56 67 — — — —

C D 24.5 40.5 29 53 41 68 48 81.5 48 86 60 112

E 20 24 35 40 40 50

EE 27 33 — — — —

F 6.8 12 14 18 18 20

G 4.5 5.5 7 9 9 11

øG 4.5 5.5 7 9 9 11

D H 14 19 21 26 27 31

J 2.8 3.2 4 4 4.6 6.4

X-X

K 25 30 41 50 50 70

A Spacer width

Applicable model AC10 AC20 AC25 , AC30 AC40 AC40 -06 AC50, AC55, AC60, AC50B, AC55B, AC60B

Replacement parts Description

Material

Seal

HNBR Note 2)

Y100T Y100P-060AS Note 1)

Y200T Y200P-060S

Part no. Y300T Y400T Y300P-060S Y400P-060S

Y500T Y500P-060S

Y600T Y600P-060S

Note 1) Y-100T comes with 2 O-rings. Note 2) NBR seal is used for Y100T spacer because of no direct contact with fluid. Blue Area: Typically Shipped from Barnum Stock

F.R.L. Unit Accessories

800.695.3055

Series AC

Attachment

Function

Port size

Piping adapter

M5 x 0.8 1/8, 1/4, 3/8, 1/2, 3/4, 1

Allows installation/removal of the component without removing the piping.

M5 x 0.8 1/8, 1/4, 3/8, 1/2

Redirects the air flow.

1/8, 1/4, 3/8

Prevents back flow from lubricator.

M5 x 0.8 1/8, 1/4, 3/8, 1/2

Allows piping in all 4 directions.

1/8, 1/4, 3/8, 1/2, 3/4, 1

Releases residual pressure in lines.

T-interface Check valve

Cross interface Residual pressure relief 3 port valve

Attachment/Accessory Part No. Part no. Model

Description

Attachment

Spacer Pressure switch T-Interface

(5)

(4) (5)

Y210-(

Residual pressure relief 3 port valve (5) Piping adapter

AC20D Y200 IS1000M-20

(5)

VHS20E200-

(5)

01 02) 01 02

IS1000E-20

(5)

Y24-

E30001 02 03

02 03

VHS30-

01 02 03

Pressure switch with piping adapter Cross interface

AC30D Y300 IS1000M-30 Y310-( 01) 02

01 02

Y34-

01 02

02 03 04

VHS40-

02 03 04

IS1000E-30

AC40D Y400 IS1000M-40 Y410-( 02) 03

E40002 03 04

02 03 04 06

IS1000E-40 Y44-

02 03

AC40D-06 Y500 IS1000M-50 Y510-( 02) 03 VHS40- 06 E500- 06

02 03 04 06

â&#x20AC;&#x201D;

Y54-

03 04 Note 1)

in part number indicate N for NPT. Note 2) For F.R.L units, port sizes not in ( ) are for standard application.

Blue Area: Typically Shipped from Barnum Stock

Soft Start Up Valve With Lock Out How to Order

800.695.3055

Large e ective area Manual/Manual solenoid lock out

AVL

20 00 F

AVL2000/3000/4000/5000

Low power consumption Modular design

5 DZM

Soft start valve with lock out

Air direction

Body size 20 30 40 50

Nil R

Port thread Nil N F

1/4 3/8 1/2 3/4, 1

Rc NPT G

1/4 (AVL2000)

3/8 (AVL3000)

1/2 (AVL4000)

3/4 (AVL5000)

1 (AVL5000)

Left to Right Right to Left

Electric entry

Port size Rated coil voltage

Option Nil

No gauge

Pressure gauge(Unit: MPa)

Pressure gauge (Unit: MPa, psi)

Nil 1 2 3 4 5 6 9

Manual lockout 100VAC (50/60Hz) 200VAC (50/60Hz) 110 to 120VAC (50/60Hz) 220VAC (50/60Hz) 24VDC 12VDC Others

Nil D

Manual lockout D type DIN connector D type DIN connector with indicator light & suppressor D type DIN connector with M12 connector, indicator light & surge voltage suppressor

DZ DZM

Piston B Switching Pressure (Close to Open)

Specifications AV2000

AV3000

AV4000

1/4

3/8

1/2

Port size Proof pressure

75 (0.5)

AV5000 3/4

Outlet pressure psi (MPa)

Model

225psi (1.5MPa)

Operating pressure range

30 to 150psi (0.2 to 1MPa)

Ambient and fluid temperature Effective area (mm2)

O.S.H.A comliant-lacable soft start valve. Gradual increase of supply pressure and rapid exhaust of system air when the supply is shut off.

32 to 140°F (0 to 60°C)

1(P) to 2(A)

113

122

2(A) to 3(R)

132

141

60 (0.4) 45 (0.3) 30 (0.2) 15 (0.1) 0

15 30 45 60 75 90 105 120 135 150 (0.1) (0.2) (03) (0.4) (0.5) (0.6) (0.7) (0.8) (0.9) (1.0)

Weight manual/solenoid (Kg/lb) 0.64 (1.14) 0.74 (1.63) 1.00 (2.21) 1.90 (4.19) 1.84 (4.06)

Electrical specification

Weight manual (Kg/lb) Rated coil voltage

100, 200, 110 to 120, 220VAC (50/60Hz), 12, 24VDC

Allowable voltage fluctuation Coil insulation type Inrush Current AC consumption Energized Current consumption DC Electric entry Optional specification

–15% to +10% of rated voltage

Metric Gauge

Muffler Table

Equivalent to B type [266°F (130°C)] 5.6V (50Hz), 5.0VA (60Hz) 3.4VA (2.1W) 50Hz, 2.3VA (1.5W) 60Hz 1.8W Type D DIN Terminal, M12 connector Indicator light/Surge voltage suppressor

Gauges - screw in type AVL

Inlet pressure psi (MPa)

0.52 (1.15) 0.62 (1.37) 0.88 (1.94) 1.78 (3.93) 1.72 (3.79)

North American Gauge

AVL

Muffler

AN200-02

AN202-N02

AN300-03

AN300-N03

AN400-04

AN400-N04

AN600-10

AN600-N10

Blue Area: Typically Shipped from Barnum Stock

20-50 K40-MP1.0-01MS K40-MP1.0-N01MS

Muffler NPT

Yellow Area: Typically Shipped from SMC Stock

Pressure Relief 3 Port Valve with Locking Holes How to Order

800.695.3055

VHS

Pressure relief 3-port valve

Nil B R Z Note1)

Body size 20 30 40 50

1/8 3/8 1/2 3/4

None Knob color: Black Flow direction: Right to left PSI as unit displayed on label

Note1) Only for the NPT thread

Size combination Body size 30 40 – –

Symbol

Thread size

Port thread

1/8

Nil N F

1/4

3/8

–

1/2

–

3/4

–

Rc NPT G

50 – – – –

–

Large knob

Utilizes an oversized knob for simple operation.

Key hole for locking out knob Attaching a key or tag locks out air supply.

Can prevent accidents due to inadvertent air supply.

When in the exhaust position, the valve may be padlock secured. Prevents accidental start-ups while personnel are cleaning or servicing equipment.

Manually operated valve can be used to prevent accidents caused by residual pressure in pneumatic lines.

OSHA standard (Occupational Safety and Health Administration Department of Labor) For safety control, OSHA rule requires energy sources for certain equipment be turned off or disconnected and that the device either be locked or labelled with a warning tag.

The supply/exhaust status of the air flow can be verified at a glance in the indicating window.

SUP : Supply EXH : Exhaust

Blue Area: Typically Shipped from Barnum Stock

Muffler Table

Yellow Area: Typically Shipped from SMC Stock

VHS

Muffler

AN101-01

AN101-N01

AN202-02

AN202-N02

AN300-03

AN300-N03

40-06 AN400-04

AN400-N04

AN400-04

Muffler NPT

AN400-N04

SMC Standard Air Prep Packages 800.695.3055

The following NPT ported air prep units come assembled from H.H. Barnum for quick delivery. Other op ons are available on request. Please e-mail our tech support group for custom assemblies at tech.support@hhbarnum.com These assemblies include a ¼ turn 3 way lock out valve, 2 cross spacers, par culate pre ﬁlter, electronic three way slow start lock out valve with manual lock out, regulator with digital pressure gauge and accessories

¼” = HHB-107205 3/8” = HHB-107206 ½” = HHB-105227 ¾” = HHB-107207

These assemblies include a ¼ turn 3 way lock out valve, cross spacer, ﬁlter regulator with built in digital pressure gauge and accessories

¼” = HHB-107193 3/8” = HHB-107194 ½” = HHB-107185 ¾” =HHB-107195

Electro-Pneumatic Regulator Series ITV1000/2000/3000

800.695.3055

RoHS

How to Order

[Option]

ITV 3 0 1 0

0 1

S CE compliant

Model 1 2 3

1000 type 2000 type 3000 type

Nil

— CE compliant

For detailed information on models for CE, refer to SMC's website.

Made to Order Specifications Pressure display unit

Pressure range 1 3 5

0.1 MPa 0.5 MPa 0.9 MPa

Nil

2 Note) 3 4 Note) 5

Power supply voltage 0 1

MPa kgf/cm2 bar psi kPa

Note) Under Japan's new Measurement Act, this is only for overseas sales (SI units are to be used inside Japan). For the communication models, CC, DN, PR and RC, only “Nil” is available as it does not have a pressure display.

24 VDC 12 to 15 VDC

Note) Communication models (CC, DN PR, RC) are available only for 24 VDC.

Cable connector type Input signal/ Communication model 0

Current type 4 to 20 mA DC (Sink type)

Current type 0 to 20 mA DC (Sink type)

2 3

Voltage type 0 to 5 VDC Voltage type 0 to 10 VDC

40 CC DN PR RC

Preset input CC-Link DeviceNet™ PROFIBUS DP RS-232C communication

S L N

Monitor output 1 2 3 4

Analog output 1 to 5 VDC Switch output/NPN output Switch output/PNP output Analog output 4 to 20 mA DC (Sink type)

Nil

None

Note) Order communication cable (other than RS-232C) separately. See below.

Bracket Nil

B C

Thread type Nil

N T F

Straight type 3 m Right angle type 3 m Without cable connector

Without bracket Flat bracket L-bracket

Port size

Rc NPT NPTF G

1 2 3 4

1/8 (1000 type) 1/4 (1000, 2000, 3000 type) 3/8 (2000, 3000 type) 1/2 (3000 type)

Accessories (option)/Part No. Description

Part No.

ITV10

Flat bracket assembly (including mounting screws) KT-ITV-F1 L-bracket assembly (including mounting screws) KT-ITV-L1 Power cable connector

CC-Link compatibility DeviceNet™ compatibility PROFIBUS DP compatibility

Communication cable part number PCA-1567720 (Socket type) PCA-1567717 (Plug type) PCA-1557633 (Socket type) PCA-1557646 (Plug type) PCA-1557688 (Socket type) PCA-1557691 (Plug type)

Remarks Dedicated Bus adapter supplied with the product. T-branch connector not supplied. T-branch connector not supplied.

ITV30 KT-ITV-F2 KT-ITV-L2

Straight type 3 m

P398020-500-3 (P398020-504-3 for DeviceNet™)

Right angle type 3 m

P398020-501-3 (P398020-505-3 for DeviceNet™)

For communication cables, use the parts listed below Bus adapter (CC-Link model only) (refer to the catalog [M8/M12 Connector] CAT.ES100-73 for details) or order the product certified for the respective protocol (with M12 connector) separately. Application

ITV20

EX9-ACY00-MJ

Electro-Pneumatic Regulator 800.695.3055

Series ITV1000/2000/3000

Ethernet How to Order

RoHS [Option]

ITV 2 0

Model 1 2 3

SEN

DUQ00833

Thread type

1000 type 2000 type 3000 type

Nil

N T F

Pressure range 1 3 5

Port size

Rc NPT NPTF G

1/8 (1000 type) 1/4 (1000, 2000, 3000 type) 3/8 (2000, 3000 type) 1/2 (3000 type)

1 2 3 4

139.9

0.1 MPa 0.5 MPa 0.9 MPa

M5X0.8 SOLENOID VALVE EXHAUST

ISOMETRIC VIEW

Model Power supply

ITV2010

ITV2030

ITV2050

Power supply voltage 24VDC type: 0.15A or less

Current consumption

Minimum supply vacuum pressure

Set pressure +0.1MPa

Maximum supply vacuum pressure

0.2 MPa

Set pressure +0.1MPa

1.0MPa

0.005 to 0.1MPa

0.005 to 0.5MPa

0.005 to 0.9MPa

Digital input

12 bit + Sign

Output signal

Digital output

12 bit + Sign

Linearity

Within + 1% (full span)

Hysteresis

Within 0.5% (full span)

Repeatability

Within + 0.5% (full span)

Sensitivity

Within 0.2% (full span) Within + 0.12% (full span)/C째

Temperature characieristics

+ 1% (fullspan)

Accuracy Units

MPa: 0.001.Kpa: 000.1.PSI: 000.1bar:0.001.k gf/cm2: 0.001 3 to 50C째 (with no condensation)

Ambient and fluid temperature

IP65 equivalent

Enclosure

350g

Weight 18

Set pressure -13.3kPa -10 1kPa

Input signal

Output pressure display

ITV2090

24VCD + 10%

Voltage

Regulating pressure range

OUT

SUP

-1.3 to-80kPa

Digital Flow Switch Series PF2A

800.695.3055

How to Order Integrated Display Type

PF2A7 10

Flow rate range 1 to 10 l /min 5 to 50 l /min 10 to 100 l /min 20 to 200 l /min 50 to 500 l /min

10 50 11 21 51

Symbol

01 02 03 04

M Unit specification

Thread type Nil

Rc NPT G

N F

Lead wire (Refer to page 35.) Symbol M12 3 m lead wire with connector Without lead wire N

Port size

Output specification

Flow rate (l /min) Port size 10 50 100 200 500 Applicable model 1/8 PF2A710/750 1/4 3/8 PF2A711/721 1/2 PF2A751

Remote Type Sensor Unit

PF2A5 10

Flow rate range 1 to 10 l /min 10 5 to 50 l /min 50 10 to 100 l /min 11 20 to 200 l /min 21 50 to 500 l /min 51

Symbol

Output specification

NPN open collector 2 outputs

PNP open collector 2 outputs

N F

Option (Refer to page 35.) Nil

Rc NPT G

None e-con connector x 1 pc.

The cable and connector are shipped unassembled.

Port size

Flow rate (l /min) Port Symbol size Applicable model 10 50 100 200 500 01 1/8 PF2A510/550 02 1/4 03 3/8 PF2A511/521 04 1/2 PF2A551 Symbol Nil

1 2

Remote Type Display Unit

Note) Fixed units: Real-time flow rate: l /min Accumulated flow: l

Thread type Nil

Nil With unit switching function Fixed SI unit Note) M

PF2A3 0 0

Lead wire (Refer to page 35.) Nil

M12 3 m lead wire with connector Without lead wire

Output specification

Applicable display unit (monitor) model Specification Series PF2A300 Output for display unit Series PF2A200/300 Output for display unit + analog output (1 to 5 V) Series PF2A300 Output for display unit + analog output (4 to 20 mA)

Unit specification Flow rate range 0 1

1 to 10 l /min 5 to 50 l /min 10 to 100 l /min 20 to 200 l /min 50 to 500 l /min

4-channel Flow Monitor Remote Type Display Unit

PF2A510 PF2A550 PF2A511 PF2A521 PF2A551

Panel mounting

Output specification 0 1

Applicable model PF2A300, 310 PF2A301, 311

Output specification 0 1

With unit switching function Fixed SI unit Note)

Note) Fixed units: Real-time flow rate: l /min Accumulated flow: l

Output specification NPN open collector 2 outputs PNP open collector 2 outputs

Symbol

PF2A20 0

Accessory / Power supply output cable (2 m)

Nil M

Mounting

Symbol Flow rate range Type for sensor unit

Option 2 (Refer to page 35.)

NPN4 outputs PNP4 outputs

Nil

None Sensor connector (4 pc.)

Unit specification Nil

Option 1 (Refer to page 35.)

With unit switching function Fixed SI unit Note)

Nil

A B

Note) Fixed units: Real-time flow rate: l /min Accumulated flow: l

None Panel mounting Front protective cover + Panel mounting

Connectable remote type sensor part is PF2A5

- -1 (with analog output 1 to 5 V).

Digital Pressure Switch Series ZSE40A(F)

800.695.3055

How to Order

Rated pressure range ISE40A –0.1 to 1.000 MPa

For positive pressure

ISE40A

01 X M

For vacuum/ compound pressure

ZSE40A 01 Y M

Rated pressure range ZSE40A ZSE40AF

0.0 to –101.3 kPa –100.0 to 100 kPa

R1/8 (With M5 female thread)

N01

NPT1/8 (With M5 female thread)

Rc1/8

WF1

G1/8

Made to Order

Symbol Specifications/Description Lead wire length 3 m X501 Symbol Calibration certificate M12 4-pin pre-wired Nil X531 connector (Lead wire length 100 mm) K Refer to page 17 for details. Option 1

Option 2

Piping specifications

R1/8, NPT1/8 M5 x 0.8

Nil

None Bracket A

Rc1/8, G1/8

Bracket B

M5 x 0.8 (Female thread) M5 x 0.8

ø4 one-touch fitting

ø6 one-touch fitting

Bracket D

D ø4, ø6 one-touch fitting

Made to Order

Panel mount adapter

Combination of piping specifications with option 1 and part numbers of options Option 1 Description Symbol Part no. Bracket A A ZS-24-A Bracket B B ZS-24-B Bracket D D ZS-24-D Panel mount adapter

Panel mount adapter + Front protective cover

Piping

01/N01

01 N01 W1 WF1 M5 C4 C6

ZS-35-C ZS-35-D ZS-35-F ZS-35-G

W1/WF1/M5/C4/C6

Output specifications R T S V X Y

When optional parts are required separately, Unit specifications use the following part numbers to place an order. Option Nil With unit switching function Note 1) Bracket A With 2 mounting screws each of M3 x 5L, M4 x 5L Fixed SI unit Note 2) M Bracket B With 2 mounting screws M4 x 5L With unit switching function Note 1) P (Initial value psi) Bracket D With 2 mounting screws each of M3 x 5L, M4 x 5L Note 1) Under the New Measurement Law, Panel mount adapter (Piping: For 01/N01) sales of switches with the unit Panel mount adapter switching function are not allowed for (Piping: For W1/WF1/M5/C4/C6) use in Japan. Panel mount adapter + Front protective cover Note 2) Fixed unit: (Piping: For 01/N01) For vacuum/compound pressure: kPa Panel mount adapter + Front protective cover For positive pressure: MPa (Piping: For W1/WF1/M5/C4/C6) 20 Blue Area: Typically Shipped from Barnum Stock

Options/Part No. Part no.

ZS-24-A ZS-24-B ZS-24-D ZS-35-C ZS-35-D ZS-35-F ZS-35-G

NPN open collector 2 outputs + Analog voltage/Auto-shift switching PNP open collector 2 outputs + Analog voltage/Auto-shift switching NPN open collector 2 outputs + Analog current/Auto-shift switching PNP open collector 2 outputs + Analog current/Auto-shift switching NPN open collector 2 outputs + Copy function PNP open collector 2 outputs + Copy function

Panel mount adapter + Front protective cover

01/N01

W1/WF1/M5/C4/C6

Some options are unavailable depending on the piping specifications. Refer to “Combination of piping specifications with option 1 and part numbers of options”.

Digital Pressure Switch Series ISE70

800.695.3055

How to Order

ISE70

1 MPa

43 M

Piping R N

F02

G1/4 (ISO1179)

Option 2 Nil

Output 27 43

None With bracket

2 NPN open collector 2 outputs ((Pin no.: 2, 4) F

PNP open collector 1 output (Pin no.: 2)

PNP open collector 1 output (Pin no.: 4)

2 PNP open collector 2 outputs (Pin no.: 2, 4) are not included.

Display unit Nil

With unit display switching function N

Fixed SI unit Note 2)

Option 1 None

Nil

With unit display switching function Note 1)

Note 1) Under the New Measurement Law, sales of switches with the unit switching function have not

straight

right-angled

Note 2) Fixed unit: MPa

Optional Part No. When optional parts are required separately, use the following part numbers to place an order. Option

t r . a o Pn

e t o

OUT1

Bracket

T SE

make up one set.

ZS-31-A

Note) Mounting screws are not included.

Bracket B Bracket assembly

straight

right-angled

ZS-31-B

Lead wire length: 5 m

ZS-31-C

Lead wire length: 5 m

Blue Area: Typically Shipped from Barnum Stock

VQC 5-port Solenoid Valve Series

800.695.3055

Lateral Plug-in Style Manifold Series

VQC1000/2000/4000

CE compliment

Compact size with large flow Model

Manifold Metal seal Rubber seal Applicable pitch (mm) cylinder size (mm) Cv Cv

VQC1000

10.5

0.18

0.25

up to ø50

VQC2000

16.0

0.60

0.80

up to ø80

VQC4000

25.0

1.70

2.00

up to ø140 Connector

Fast response times and long service life VQC1100: 10 ms 2 ms; 200 million cycles VQC2100: 20 ms 2 ms; 200 million cycles VQC4100: 17 ms 3 ms; 100 million cycles

For I/O SI unit (DeviceNet compatible)

4-position dual 3-port valves for independent control of A & B ports Availabe configurations [N.C./N.C.], [N.O./N.O.], and [N.C./N.O.].

Single mounting screw, clamp construction Replaceable One-touch fittings

F kit & P kit Connector entry direction can be changed with ease

Serial Communication manifolds

Connector entry direction can be changed from the top to the side by simply pressing the manual release button. Serial interface unit EX250

y ntr ee d i S

Kit (Serial transmission)

Manifolds with a wide variety of wiring options

Kit (D-sub connector)

25-pin

Kit (Flat ribbon cable)

Kit (Terminal block box)

Kit (Lead wire)

25 core cable

26-pin, 20-pin

Protective enclosure conforms to IP 67

VQC manifolds with EX250 serial network adaptor is available in DeviceNet, Profibus-DP, As-i CC-link, ControlNet and CANopen protoclos, with 64 I/O. The manifold also accommodate gateway type serial wiring to control 4 branch lines, which offers flexibility in choosing manifold mounting location. The Gateway unit features 128 I/O and supports DeviceNet, Profibus-DP and Remote I/O protocols.

Input blocks

Top entry

M12/M8 connector selection available

Protective enclosure conforms to IP 67

Kit (Multiple connector)

26 pins

Protective enclosure conforms to IP 67

VQC 5-port Solenoid Valve 800.695.3055

How to Order

VQC 1 1 0 0

Valve

Series 1 2

VQC1000 VQC2000

Manual override Nil: Non-locking

Light/Surge voltage suppressor Nil E

Type of actuation 2-position single

A B

5 N.C.

EA P EB

2-position double (metal) A B EA P EB

A B

5 N.O.

EA PEB

3-position closed center

Coil voltage 5

3 N.C.

24VDC

5 N.C.

Function Nil

Seal type 0 1

3 N.O.

Note 3) R option not available for 4 position dual 3 port valves. (Type of actuation A, B, C)

A B

A B EA P EB

(Manual)

Note 2) When specifying more than one option, enter symbols in alphabetical order.

3-position exhaust center

3-position pressure center

C: Locking type

Note 1) For metal seal type only.

Note) For rubber seal type only.

A B

EA P EB

Standard type (1W) Negative Common High voltage type (1.0MPa)

K Note 1) Note 3) External pilot R Low-wattage type (0.5W) Y

Metal seal Rubber seal

EA P EB

B: Locking type (Slotted)

3 N.O.

4-position dual 3-port valve (C) 4 2

Note)

4-position dual 3-port valve (B) 4 2

Note)

2-position double (rubber)

Note) Not applicable to S Kit.

4-position dual 3-port valve (A) 4 2

Note)

push type (Slotted)

With Without Note)

Compact size with large flow Model

Manifold Metal seal Rubber seal Applicable pitch (mm) cylinder size (mm) Cv Cv

VQC1000

10.5

0.18

0.25

up to ø50

VQC2000

16.0

0.60

0.80

up to ø80

Also available VQ5000 manifold

Dual 3 port valves, 4 positions VQC1000/2000 (Rubber seal type only) Two 3 port valves built into one body. The 3 port valves on the A and B sides can operate independently. When used as 3 port valves, only half the number of stations is required. Can also be used as a 4 position, 5 port type valve.

Compact large flow (Cv 4.4) manifold valve to drive cylinder size up to ø180mm R1 A P B R2

Exhaust center : VQC1A01, VQC2A01 Pressure center: VQC1B01, VQC2B01 Blue Area: Typically Shipped from Barnum Stock

Model

A side

B side

VQC1A01 VQC2A01

N.C. valve

VQC1B01 VQC2B01

N.O. valve

VQC1C01 VQC2C01

N.C. valve

N.O. valve

JIS Symbol 4 (A) 5 (R1)

2 (B)

1 (P)

4 (A) 5 (R1)

2 (B)

1 (P)

4 (A) 5 (R1)

3 (R2)

3 (R2) 2 (B)

1 (P)

3 (R2)

5-port Solenoid Valve Series VQC

800.695.3055

Valve

VQC 4 1 0 0 Series 4

Nil E

Type of actuation A B

5 6

EA PEB

2-position double (metal)

Nil R Y

EA P EB

2-position double (rubber) A B

A B EA P EB

3-position exhaust center

A B

push type (Slotted)

B: Locking type

Standard type (1W) External pilot Low wattage type (0.5W)

(Slotted)

Note) When specifying more than one option, enter symbols in alphabetical order.

EA PEB

3-position closed center

Nil: Non-locking

24VDC 12VDC

Function

A B

With Without light, with surge voltage suppressor

Coil voltage

2-position single

Manual override

Light/Surge voltage suppressor

VQC4000

Seal type 0 1

Metal seal Rubber seal

EA P EB

3-position pressure center

A B EA P EB

3-position perfect

A B EA P EB

Manifold Option Blanking plate assembly VVQ4000-10A-1

Individual SUP spacer VVQ4000-P-1- 02 03

Individual EXH spacer VVQ4000-R-1- 02 03

SUP/EXH block plate VVQ4000-16A

Throttle valve spacer VVQ4000-20A-1

Residual pressure release valve perfect spacer VVQ4000-25A-1 Note 1)

SUP stop valve spacer VVQ4000-37A-1

Interface regulator A ARBQ4000-00- BP-1

Note 1) Perfect spacers with residual pressure release valve cannot be 24combined with external pilot specifications.

SV 5-port Solenoid Valve 800.695.3055

How to Order

Valve

5 F

1 00

Series 1 2 3 4

SV1000 SV2000 SV3000 SV4000

Type of actuation 1 2 3 4 5 A* B* C*

2-position single solenoid 2-position double solenoid 3-position closed center 3-position exhaust center 3-position pressure center 4-position dual 3-way NC/NC 4-position dual 3-way NO/NO 4-position dual 3-way NC/NO

Manual Override Nil D

* Availabel only for SV1000/2000.

Light/Surge suppressor

Pilot specification Nil R

U R

Internal pilot External pilot

Back pressure check valve None Built-in

Compact size with large flow Model (Series)

Appicable Manifold Rubber seal Cv cylinder size (mm) pitch (mm)

SV1000

10.5

0.28

Up to ø50

SV2000

16.0

0.48

Up to ø80

SV3000

20.5

0.93

Up to ø100

SV4000

24.0

1.60

Up to ø125

Blue Area: Typically Shipped from Barnum Stock

With light and surge suppressor With surge supressor only

Rated voltage

* External pilot specification is not available for 4 position dual 3-way valves.

Nil K

Non-locking push type Slotted locking type

5 6

24VDC 12VDC*

* Except EX500, EX250, and EX120 serial manifolds.

SV 5-port Solenoid Valve 800.695.3055

How to Order

Interface regulator Series SV1000

Series SV2000, 3000, 4000

SV1 0 00

For single and double For 3-position

P A1 B1

Option N5 05 N6 06 M1

SV 2 000

For odd no. station With PSI pressure gauge With metric pressure gauge For even no. station With PSI pressure gauge With metric pressure gauge Without pressure gauge

Series

Regulator port

Applicable valve 0 3

P 2 3 4

P port A port (P port control type A port regulated) B port (P port control type B port regulated)

Regulator port

SV2000 SV3000 SV4000

P A1

Option

N0 With PSI pressure gauge 00 With metric pressure gauge M1 Without pressure gauge

Note) Note that a part number for Series SV1000 with pressure gauge differs depending on the position of the station (odd no. or even no.) on which the manifold is mounted to prevent the pressure gauges from interfering each other.

P port A port (P port control type A port regulated) B port (P port control type B port regulated)

Note) Note that a part number of the valve for single/double and 3-position differs due to the difference in length of the solenoid valve. When 3-position valve is used on the same manifold, all valves must be a 3-position valve.

Individual SUP/EXH spacer assembly

SV1000

SV 2 000

Port size ø3.2 One-touch fitting ø4 One-touch fitting ø6 One-touch fitting ø1/8" One-touch fitting ø5/32" One-touch fitting ø1/4" One-touch fitting

2 3 4

SV2000 SV3000 SV4000

Thread type Nil F N T

Spacer type Individual SUP spacer

Accessory Series

Series

C3 C4 C6 N1 N3 N7

Rc G NPT NPTF

Port size for Series SV2000/3000/4000

SV1000

Round head combination screw SX3000-22-9 (M2 x 39.5)

SX3000-57-4

SV2000

SV2000-21-6 (M3 x 46)

SY5000-11-15

SV3000

SV3000-21-3 (M4 x 53)

SY7000-11-11

SV4000

SV2000-21-5 (M3 x 60)

SY9000-11-2

Gasket

Series SV2000 SV3000 SV4000

Port size 1/8 1/4

Blue Area: Typically Shipped from Barnum Stock

SV 5-port Solenoid Valve 800.695.3055

How to Order

Tie Rod Base Series SV: How to order manifolds

1 Series 1 SV1000 SV2000 2 SV3000 3 4 SV4000

10S 1

6 Stations 01

1 station

The maximum number of stations differs depending on the electrica entry. Refer to 2

FD1 FD2 FD3 PD1 PD2 PGD1 PGD2 PHD1 PHD2

P Kit

8 SUP/EXH block assembly

S R RS

stations Nil

Flat ribbon cable kit (10P) lateral

1-23

2-24 2-18 2-8

None 1 station

8 stations

Note) Without SI unit, the symbol is nil.

5 Input block common

specifications Nil

+COM –COM

2-24

Circular connector (26P)

P, E port location QW NW O

2-32

For DeviceNet For Profibus - DP Without SI unit

2-32

A1WD For Remote I/O

U D B

U side (2 to 10 stations) D side (2 to 10 stations) Both sides (2 to 20 stations)

2-16

A2WD For DeviceNet/Profibus - DP Note: The maximum number of stations is determined by the total number of solenoids.

Internal pilot Internal pilot/Built-in silencer External pilot External pilot/Built-in silencer l

Direct mounting DIN rail mounting (With DIN rail) DIN rail mounting (Without DIN rail)

···

For 3 stations When a longer DIN rail is desired than the specified stations. (Specify a longer D20 For 20 stations rail than the standard length.)

···

Stations Note 1)

SDZEN Ethernet I/P

10 Mounting D D0 D3

3 Input block

D-sub connector kit (25P) with 1.5m cable D-sub connector kit (25P) with 3.0m cable D-sub connector kit (25P) with 5.0m cable Flat ribbon cable kit (26P) upward Flat ribbon cable kit (26P) lateral Flat ribbon cable kit (20P) upward Flat ribbon cable kit (20P) lateral Flat ribbon cable kit (10P) upward

Note) When the built-in silencer type is used, keep the exhaust port from coming in direct contact with water or other liquids.

Nil

Kit

specifications

Nil

X160US

EX250 S Kit C Kit

Note) Without SI unit, the symbol is nil. Maximum number of inputs 32 for EX250.

D-side entry

EX500

1 2 3

Without input block M12: 2 inputs M12: 4 inputs M8: 4 inputs (3 pins)

2 Electrical entry

4 Input block type Nil

···

SS5V

EX500

10 10S1

···

EX250

SS5V SS5V

F Kit

Discrete Wiring

In the case of D0,only DIN rail fittings are attached.

A, B port size (metric)

Symbol

C3 C4 C6 C4 C6 C8 C6 C8 C10 C8 C10 C12 02 03 02F 03F M

Applicable series A, B port ø3.2 One-touch fitting ø4 One-touch fitting SV1000 ø6 One-touch fitting ø4 One-touch fitting ø6 One-touch fitting SV2000 ø8 One-touch fitting ø6 One-touch fitting SV3000 ø8 One-touch fitting ø10 One-touch fitting ø8 One-touch fitting ø10 One-touch fitting ø12 One-touch fitting SV4000 Rc 1/4 Rc 3/8 G 1/4 G 3/8 A, B ports mixed

For Complete Manifold/Valve Assemblies call Barnum’s Technical Support Team @ 800.695.3055

A, B port size (inch) Symbol

N1 N3 N7 N3 N7 N9 N7 N9 N11 N9 N11 02N 03N 02T 03T M

Applicable series A, B port ø1/8" One-touch fitting ø5/32" One-touch fitting SV1000 ø1/4" One-touch fitting ø5/32" One-touch fitting ø1/4" One-touch fitting SV2000 ø5/16" One-touch fitting ø1/4" One-touch fitting ø5/16" One-touch fitting SV3000 ø3/8" One-touch fitting ø5/16" One-touch fitting ø3/8" One-touch fitting NPT 1/4 SV4000 NPT 3/8 NPTF 1/4 NPTF 3/8 A, B ports mixed

* In case of mixed specification (M), Indicate separately on a manifold specification sheet.

Blue Area: Typically Shipped from Barnum Stock

SI Unit Integrated-type/For Output Series EX260

800.695.3055

Note)

RoHS

Compact design

Compact design for space saving

Number of outputs Each 32/16 digital output type available in the series Output polarity

Each negative common (PNP) / positive common (NPN) type available in the series

Enclosure

IP67 (For units with D-sub connector, and when connected with S0700 manifolds, it is IP40.) ON/OFF switching is possible with an internal terminating resistor for communication.

Internal terminating resistor (Only for units compatible with M12 PROFIBUS DP, CC-Link communication connectors) SY3000/5000

VQC1000/2000/4000

S0700

SV1000/2000/3000

Note) The SY3000/5000, VQC1000/2000/4000, and S0700 are not yet UL-compatible.

How to Order SI Units

EX260 S PR1 Communication protocol Symbol

Protocol

DN1 DN2 DeviceNet™ DN3 DN4 PR1 PR2 PR3 PR4 PROFIBUS DP PR5 PR6 PR7 PR8 MJ1 MJ2 CC-Link MJ3 MJ4 EC1 EC2 EtherCAT EC3 EC4 PN1 PN2 PROFINET PN3 PN4 EN1 EN2 EtherNet/IP™ EN3 EN4

Number of outputs 32 16 32 16 32 16 32 16 32 16 32 16 32 16

Communication connector SI unit output polarity Source/PNP (Negative common) Sink/NPN (Positive common) M12 Source/PNP (Negative common) Sink/NPN (Positive common) Source/PNP (Negative common) Sink/NPN (Positive common) M12 Source/PNP (Negative common) Sink/NPN (Positive common) Source/PNP (Negative common) Sink/NPN (Positive common) D-sub Note) Source/PNP (Negative common) Sink/NPN (Positive common) Source/PNP (Negative common) Sink/NPN (Positive common) M12 Source/PNP (Negative common) Sink/NPN (Positive common) Source/PNP (Negative common) Sink/NPN (Positive common) M12 Source/PNP (Negative common) Sink/NPN (Positive common) Source/PNP (Negative common) Sink/NPN (Positive common) M12 Source/PNP (Negative common) Sink/NPN (Positive common) Source/PNP (Negative common) Sink/NPN (Positive common) M12 Source/PNP (Negative common) Sink/NPN (Positive common)

Note) Enclosure is IP40 when the communication connector is D-sub.

Manifold symbol QAN QA QBN QB NAN NA NBN NB NCN NC NDN ND VAN VA VBN VB DAN DA DBN DB FAN FA FBN FB EAN EA EBN EB

VQC 5-port Solenoid Valve 800.695.3055

Series VQC - EX250

Manifold

Series VQC1000 to 4000: Base-Mounted Type/Plug-in Unit How to order manifolds VV5QC 2 1

C8 FD1

F / P / T / L / M Kit

VV5QC 2 1

C8 SDQ

X160US

Requires for S kit "SDQ".

Base-Mounted plug-in 4 Electrical entry/Cable length

Series

D-side entry

VQC 40000

2 Stations 01

1 station

M5 Thread ø1/8" ø5/32" ø1/4" ø5/16" ø3/8"

Mixed Rc 1/4 Rc 3/8 02T NPT 1/4” 03T NPT 3/8”

Stations Note 2)

FD0 FD1 FD2 FD3

1 to 12 (24)

TD0

Terminal block box kit

1 to 10 (20)

4 1 1 1,2 1,2,4 2,4 4 1,2,4 4 4 4 4

S Kit

Input/Output serial kit (EX600) Serial kit without SI unit Serial kit DeviceNet compatible Serial kit PROFIBUS-DP compatible

Nil PNP (+) or without SI unit/input block (SD0) 1 to 12 (24)

1 to 12 (24)

Power supply 7/8 inch connector (Max. supply current 8 A) Power supply 7/8 inch connector (4 pin version) *H H Barnum special

6 SI unit COM EX250 EX500 DeviceNet PROFIBUS-DP DeviceNet PROFIBUS-DP Remote I/O — +COM — –COM

SI unit COM Nil

Note) Leave the box blank for the SI unit COM without input block (SD0).

7 Input block (Fill out for I/O unit only) Nil

0 1 Blue Area: Typically Shipped from Barnum Stock

(Fill out for I/O unit only)

End Plate type select for EX600 only 2 3 4*

.. .

Without input block M12, 2 inputs M12, 4 inputs M8, 4 inputs (3 pins)

1 2 3

9 Input block COM

Note 2) Numbers inside ( ) indicate the maximum number of solenoids for mixed single and double wiring. The maximum number of stations is determined by the total number of solenoids. In the case of mixed wiring, use the option symbol "-K".

(Fill out for I/O unit only)

*Maximum number of inputs 32 for EX250.

SDO Serial kit without SI unit SDQ Serial kit DeviceNet compatible SDN Serial kit PROFIBUS-DP compatible SDZEN Ethernet I/P

SD6Q SD6N SD6ZE

8 Input block type Nil

Input/Output serial kit (EX250)

3 Cylinder port size Series C3 With ø3.2 One-touch fitting 1 C4 With ø 4 One-touch fitting 1,2 1,2 C6 With ø 6 One-touch fitting 2,4 C8 With ø 8 One-touch fitting C10 With ø 10 One-touch fitting 4

M5 N1 N3 N7 N9 N11 NM 02 03

Kit, Cable length D-sub connector kit (25P) without cable D-sub connector kit (25P) with 1.5m cable D-sub connector kit (25P) with 3.0m cable D-sub connector kit (25P) with 5.0m cable

The maximum number of stations differs depending on the electrical entry. See Table 4

C12 With ø12 One-touch fitting

Fill out for I/O serial kit only.

F Kit

VQC 10000 VQC 20000

T Kit

1 2 4

S Kit

Without SI unit/input block (SD0) Without input block With 1 input block With 8 input blocks I/O is specified separately for EX600

* See page 43-44 for how to order instructions

For Complete Manifold/Valve Assemblies call Barnum’s Technical Support Team @ 800.695.3055 29

NPN (–)

10 Options Nil

B D D K N R S T

None All stations with back pressure check valve Note 1) With DIN rail (rail length: standard) With DIN rail (rail length: special) Note 2) Special wiring specifications Note 3) (except for double wiring) With name plate External pilot Note 4) Direct exhaust with built-in silencer Note 5) Branched P and R ports on U side

When specifying two or more options, list symbols in alphabetical order. Example: -BRS Note 1) When using the back pressure check valve for the necessary stations only, enter the back pressure check valve part no. and indicate the number of manifold stations in the specification sheet. Note 2) For special DIN rail length, indicate "D ." (Enter the number of stations inside .) Example: -D08 In this case, stations will be mounted on a DIN rail for 8 stations regardless of the actual number of manifold stations. Indicate "-D0" for the option without DIN rail. Note 3) Be sure to indicate the wiring specifications in the specification sheet. Note 4) For external pilot option, "-R", indicate the external pilot specification "R" for the applicable valves as well. Note 5) The built-in silencer type does not satisfy the IP67 standard. Note 6) The SUP and EXH ports on U side are branched (toward the cylinder port and coil) with 12 one-touch fittings for connection.

Series 1,2 1,2 1,2 1,2,4 1,2,4 1,2 1,2 2

Plug-in Unit: For EX260 Integrated-type (For Output) Serial Transmission System Series VQC1000

800.695.3055

Base Mounted

RoHS How to Order Manifold

VV5QC 1 1 08 C6 SNA N B …… S Kit 1 1 Series 1

VQC1000

3 Stations

…

In the case of the 16-output SI unit Symbol Stations Note 02 2 stations Double wiring Note 1)

…

Specified layout Note 2) (Available up to 16 solenoids)

Note 1) Double wiring: single, double, 3-position and 4-position solenoid valves can be used on all manifold stations. Use of a single solenoid will result in an unused control signal. If this is not desired, order with a specified layout. Note 2) Specified layout: Indicate the wiring specifications on the manifold specification sheet. (Note that 2-position double, 3-position and 4-position valves cannot be used where single wiring has been specified.) Note 3) Includes the number of blanking plate assemblies.

C3 C4 C6 M5 CM

L4 L6

7 Mixed sizes and with port plug Top ported elbow with ø3.2 One-touch fitting Top ported elbow with ø4 One-touch fitting Top ported elbow with ø6 One-touch fitting

B4 B6

Bottom ported elbow with ø3.2 One-touch fitting Bottom ported elbow with ø4 One-touch fitting Bottom ported elbow with ø6 One-touch fitting

B5 Elbow port, mixed sizes LM MM Note2) Mixed size for different types of piping, option installed Note 1) Indicate the sizes on the manifold specification sheet in the case of “CM”, “LM”. Note 2) When selecting the mixed size for different types of piping or dual flow fitting assembly, enter “MM” and give instructions in the manifold specification sheet. Note 3) Symbols for inch sizes are as follows:

The top ported elbow is LN and the bottom ported elbow is BN .

SI unit output polarity — N

With ø3.2 One-touch fitting With ø4 One-touch fitting With ø6 One-touch fitting

L5 B3

7 6

Cylinder port size

In the case of the 32-output SI unit Symbol Stations Note 02 2 stations Double wiring Note 1) 12 12 stations 02 2 stations Specified layout Note 2) (Available up to 24 solenoids) 24 24 stations

16 16 stations

3 4

2 Manifold model 1 Plug-in unit

08 02 2 stations

Positive common Negative common

Option —

B D D K N R S

None With back pressure check valve (All stations) Note 2) With DIN rail (Rail length: Standard) With DIN rail (Rail length: Special) Note 3) Special wiring spec. (Except double wiring) Note 4) With name plate External pilot Built-in silencer, Direct exhaust Note 6)

Note 1) When two or more symbols are specified, indicate them alphabetically. Example: -BRS Note 2) When the back pressure check valve is desired, and is to be installed only in certain manifold stations, specify the mounting position on the manifold specification sheet. Note 3) For special DIN rail length, indicate “D ”. (Enter the number of stations inside .) In this case, stations will be mounted on a actual number of manifold stations. The specified number of stations must be larger than the number of stations on the manifold. Indicate “-D0” for the option without DIN rail. Note 4) Specify wiring type of each station on the manifold specification sheet. external pilot specification “R” for the applicable valves as well. specified, “-D”, “-D ” cannot be selected.

5 Kit type

Kit (Serial transmission kit (for Output))

SI unit

IP40 specification SI unit: EX260

IP67 specification

Symbol

SD0 SQA SQB SNA SNB SNC SND SVA SVB SDA SDB SFA SFB SEA SEB 30

Protocol

Number of outputs Communication connector Without SI unit 32 M12 DeviceNet™ 16 32 M12 16 PROFIBUS DP 32 D-sub Note 1) 16 32 M12 CC-Link 16 Note 1) D-sub S kit: IP40 32 M12 EtherCAT 16 specification for all 32 M12 PROFINET other S kits) 16 Note 2) For SI unit part 32 number, refer to M12 EtherNet ™ 16 page 1.

Plug-in Unit: For EX260 Integrated-type (For Output) Serial Transmission System

800.695.3055

Series VQC2000

Base Mounted

RoHS How to Order Manifold

VV5QC 2 1 08 C6 SNA N B 1 1

Series 2

Cylinder port size

Manifold model Plug-in unit

Stations

In the case of the 16-output SI unit Symbol Stations Note 02 2 stations Double wiring Note 1) 08 8 stations 02 2 stations Specified layout Note 2) (Available up to 16 solenoids) 16 16 stations Note 1) Double wiring: single, double, 3-position and 4-position solenoid valves can be used on all manifold stations. Use of a single solenoid will result in an unused control signal. If this is not desired, order with a specified layout. Note 2) Specified layout: Indicate the wiring specifications on the manifold specification sheet. (Note that 2-position double, 3-position and 4-position valves cannot be used where single wiring has been specified.) Note 3) Includes the number of blanking plate assemblies.

ø4 One-touch fitting ø6 One-touch fitting ø8 One-touch fitting Mixed sizes and with port plug Top ported elbow L4 with ø4 One-touch fitting Top ported elbow L6 with ø6 One-touch fitting Top ported elbow L8 with ø8 One-touch fitting Bottom ported elbow B4 with ø4 One-touch fitting Bottom ported elbow B6 with ø6 One-touch fitting Bottom ported elbow B8 with ø8 One-touch fitting Elbow port, mixed sizes LM MM Note 2) Mixed size for different types of piping, option installed Note 1) Indicate the sizes on the manifold specification sheet in the case of “CM”, “LM”. Note 2) When selecting the mixed size for different types of piping or dual flow fitting assembly, enter “MM” and give instructions in the manifold specification sheet. Note 3) Symbols for inch sizes are as follows:

The top ported elbow is LN bottom ported elbow is BN . 6

SI unit output polarity —

C4 C6 C8 CM

In the case of the 32-output SI unit Symbol Stations Note 02 2 stations Double wiring Note 1) 12 12 stations 02 2 stations Specified layout Note 2) (Available up to 24 solenoids) 24 24 stations

3 4

VQC2000

S Kit

Positive common Negative common

and the

Option —

B D D K N R S T

Note 1) When two or more symbols are specified, indicate them alphabetically. Example: -BRS Note 2) When the back pressure check valve is desired, and is to be installed only in certain manifold stations, specify the mounting position on the manifold specification sheet. Note 3) For special DIN rail length, indicate “D ”. (Enter the number of stations inside .) Example: -D08 In this case, stations will be mounted on a DIN rail for 8 stations regardless of the actual number of manifold stations. The specified number of stations must be larger than the number of stations on the manifold. Indicate “-D0” for the option without DIN rail. Note 4) Specify wiring type of each station on the manifold specification sheet. external pilot specification “R” for the applicable valves as well. 2 ports for SUP and EXH are included on both sides of U side (cylinder port and coil side) with ø12 One-touch fittings. Note 8) When the “SD0” (Without SI unit) is specified, “-D”, “-D ” cannot be selected.

Kit type

Kit (Serial transmission kit (for Output))

SI unit

IP40 specification SI unit: EX260 IP67 specification

Symbol

SD0 SQA SQB SNA SNB SNC SND SVA SVB SDA SDB SFA SFB SEA SEB 31

Protocol

Number of outputs Communication connector Without SI unit 32 M12 DeviceNet™ 16 32 M12 16 PROFIBUS DP 32 D-sub Note 1) 16 32 M12 CC-Link 16 Note 1) D-sub S kit: IP40 32 M12 EtherCAT 16 specification for all 32 other S kits) M12 PROFINET 16 Note 2) For SI unit part 32 number, refer to M12 EtherNet/IP™ 16 page 1.

Plug-in Unit: For EX260 Integrated-type (For Output) Serial Transmission System

800.695.3055

Base Mounted

Series VQC4000 RoHS

How to Order Manifold

VV5QC 4 1 16 03 1 1

Series

4 2

Manifold model

Stations

Cylinder port size

12 01

12 stations 1 station

SI unit output polarity —

Note 1)

Option —

None

S K

Note 2)

C8 C10 C12 02 03 B CM

In the case of the 16-output SI unit Symbol Stations Note 01 1 station

Note 1) Note 2)

manifold specification sheet.

Note 1)

08 01

Note 1) Indicate the sizes on the manifold specification sheet in the case of “CM”. Note 2) Symbols for inch sizes are as follows: <In the case of One-touch fittings>

S Kit

In the case of the 32-output SI unit Symbol Stations Note 01 1 station

1 4

SNA N

specifications on the manifold specification sheet.

Rc G

F T

Note 2)

Thread type —

1 station

assemblies. 6 Kit type

Symbol

Kit (Serial transmission kit (for Output))

SD0A SQA SQB SNA SNB SNC SND SVA SVB SDA SDB SFA SFB SEA SEB Note 2)

IP40 specification

EX260 IP67 specification 32

™

M12 M12 Note 1)

M12 M12 M12 t

M12

EX500 Decentralized Serial Wiring Series SV/VQC

800.695.3055

Specifications Gateway (GW) unit

Model

EX500-GAB1-X1

EX500-GDN1

EX500-GPR1

Applicable PLC/Communication protocol Rockwell Automation, Inc. PLC DeviceNet Release 2.0

PROFIBUS-DP

57.6 Kbit/sec, 115.2 Kbit/sec 125 Kbit/sec, 250 Kbit/sec 9.6/19.2/93.75/187.5/500 kbit/sec 230.4 Kbit/sec 500 Kbit/sec 1.5/3/6/12 Mbit/sec

Communication speed Rated voltage

24 VDC Input and control unit power supply: 24 VDC ±10%

Power supply voltage range

Solenoid valve power supply: 24 VDC +10%/–5% (Power drop warning at approx. 20 V)

Current consumption No. of input/output points No. of input/output branches Branch cable Branch cable length Communication connector Power connector

200 mA or less Maximum 64 inputs/64 outputs 4 branches (16 inputs/16 outputs per branch) 8 core heavy duty cable 5 m or less (total extension 10 m or less) M12 connector (8 pins, Socket) M12 connector (5 pins, Plug)

Ambient operating temperature/humidity

+5 to +45°C/35 to 85% RH (No condensation)

Enclosure Applicable standard Weight (g)

IP65 UL, CSA, CE 470

∗ Communication cables and connectors are sold separately.

How to Order

EX500

G DN 1

Communication protocol DN PR AB

Nil -X1

DeviceNet PROFIBUS-DP Remote I/O (RIO)

How to Order Input Manifold

How to Order Input Block

EEX500 IB1 E 8

EX500

Input unit specifications Connector type

Block type Stations

M8 connector M12 connector M8, M12 mixed

1 station

···

E T M

···

Input unit manifold

Applicable GW unit

DeviceNet PROFIBUS-DP Remote I/O (RIO)

8 stations

Applicable GW unit Nil -X1

DeviceNet PROFIBUS-DP Remote I/O (RIO)

1 2 3 4 5 6

IE 1

M8 connector, PNP specifications M8 connector, NPN specifications M12 connector, PNP specifications M12 connector, NPN specifications 8 points integrated type, M8 connector, PNP specifications 8 points integrated type, M8 connector, NPN specifications

Applicable GW unit Nil -X1

Input Unit Specifications

Input Block Specifications

Current source type input block (PNP input block) or Current sink type input block (NPN input block)

Sensor applicable

Current source type (PNP output) or Current sink type (NPN output)

Communication connector

M12 connector (8 pins, plug)

Sensor connector

M8 connector (3 pins) or, M12 connector (4 pins)

Number of connection blocks

Maximum 8 blocks

Number of inputs

2 inputs/8 inputs (M8 only)

Connection block

Block supply voltage

24 VDC

Block supply current

0.65 A maximum

Indication

100 mA or less (at rated voltage)

Insulation

Current consumption Short circuit protection

DeviceNet PROFIBUS-DP Remote I/O (RIO)

Rated voltage

Operates at 1ATyp. (Power supply cut) GW unit reset by turning power OFF and back ON.

Enclosure

IP65

Weight (g)

100 (Input block + End Block)

Sensor supply current

24 VDC Green LED None Maximum 30 mA/Sensor

Enclosure

IP65

Weight (g)

[For M8: 20] [For M12: 40] [8 points integrated type, for M8: 55]

Fieldbus System Series EX600

800.695.3055

RoHS

How to Order

SI Unit

EX600 S Version

Protocol Symbol

PR DN MJ EN EC

Description PROFIBUS DP DeviceNet™ CC-Link EtherNet/IP™ Note 1) EtherCAT Note 1)

Symbol

Description Nil MJ or EN or EC is selected When When PR or DN is selected

Output type Symbol

Digital Input Unit

Description 1 (Negative common) PNP NPN (Positive common)

EX600 DX Input type Symbol

P N

Digital Output Unit

Description PNP NPN

Symbol

B C C1 D E F

Number of Open circuit Connector inputs detection 8 inputs No M12 connector (5 pins) 4 pcs. 8 inputs No M8 connector (3 pins) 8 pcs. 8 inputs Yes M8 connector (3 pins) 8 pcs. 16 inputs No M12 connector (5 pins) 8 pcs. 16 inputs No D-sub connector (25 pins) Note1) 2) Spring type terminal block (32 pins) Note1) 2) 16 inputs No

EX600 DY Output type Symbol

P N

Digital Input/Output Unit

Number of inputs, open circuit detection, and connector

Description PNP NPN

Number of outputs and connector Symbol

B E F

Number of Connector outputs 8 outputs M12 connector (5 pins) 4 pcs. 16 outputs D-sub connector (25 pins) Note1) 2) 16 outputs Spring type terminal block (32 pins) Note1) 2)

EX600 DM Input/Output type Symbol

P N

Description PNP NPN

Number of inputs/outputs and connector Number of Number of Connector inputs outputs E 8 inputs 8 outputs D-sub connector (25 pins) Note1) 2) F 8 inputs 8 outputs Spring type terminal block (32 pins) Note1) 2)

Symbol

Note 1) Cannot be communicated with the EX600-HT1- . Refer to page 15 for a table of mountable units. Note 2) Cannot be connected with the EX600-SPR1, EX600-SPR2, EX600-SDN1, or EX600-SDN2. Refer to page 15 for a table of mountable units.

Fieldbus System

Series EX600

800.695.3055

How to Order

Analog Input Unit

EX600 AX Analog input

Number of input channels and connector Symbol

Analog Output Unit

Number of output channels and connector Symbol

Connector M12 connector (5 pins) 2 pcs. Note1) 2)

Number of input/output channels and connector Symbol

Number of input Number of output channels channels 2 channels

2 channels

Connector M12 connector (5 pins) 4 pcs. Note1) 2)

EX600 ED Power connector Symbol

2 3

Handheld Terminal

Number of output channels 2 channels

EX600 AM Analog input/output

End Plate

Connector M12 connector (5 pins) 2 pcs.

EX600 AY Analog output

Analog Input/Output Unit

Number of input channels 2 channels

Connector M12 (5 pins) 7/8 inch (5 pins)

Mounting method Symbol Nil

2 3

Description Without DIN rail mounting bracket With DIN rail mounting bracket With DIN rail mounting bracket (Specialized for Series SY)

EX600 HT1A Version

Handheld Terminals are not yet UL-compatible.

Cable length Symbol Nil

1 3

Description No cable 1m 3m

For Series EX600

800.695.3055

Series VQC1000

RoHS

How to Order Manifold

VV5QC 1 1

08 C6 SD6Q 2 N 1

Series VQC1000 Option Nil

Base mounted plug-in

B Note 2) D D0 D Note 3) K Note 4) N R Note 5) S Note 6)

Stations 01

Stations 1 station

24 Note)

24 stations

Symbol

Note) Max. number of stations depends on the wiring specifications.

Cylinder port size C3 C4 C6 M5 CM L3 L4 L6 L5 B3 B4 B6 B5 LM

With ø3.2 One-touch fitting With ø4 One-touch fitting With ø6 One-touch fitting M5 thread Mixed sizes and with port plug Top ported elbow with ø3.2 One-touch fitting Top ported elbow with ø4 One-touch fitting Top ported elbow with ø6 One-touch fitting M5 thread Bottom ported elbow with ø3.2 One-touch fitting Bottom ported elbow with ø4 One-touch fitting Bottom ported elbow with ø6 One-touch fitting M5 thread Mixed port sizes of elbow piping

Note 1) Indicate the sizes on the manifold specification sheet in the case of “CM” and “LM”. Note 2) Symbols for inch size are as follows. • N1: ø1/8" • N3: ø5/32" • N7: ø1/4" • NM: Mixed sizes The top ported elbow is LN and the bottom ported elbow is BN . For NM, specify it on the manifold specification sheet.

Kit type

S kit

Symbol

Specifications

SD60 Without SI Unit SD6Q For DeviceNet™ SD6N For PROFIBUS DP SD6V For CC-Link SD6ZE For EtherNet/IP™ SD6D For EtherCAT

Stations

1 to 12 stations

I/O Unit stations Nil

Kit type

Max. number of Max. number stations for special of solenoids wiring specifications

24 stations

None With back pressure check valve (All stations) With DIN rail (Rail length: Standard) Without DIN rail (with bracket) With DIN rail (Rail length specified, : Stations) Special wiring specifications (Except double wiring) With name plate External pilot Built-in silencer, Direct exhaust

None 1 station

9 stations

Note 1) Without SI Unit, the symbol is nil. Note 2) SI Unit is not included in I/O Unit stations. Note 3) When I/O Unit is selected, it is shipped separately and assembled by customer. Refer to the attached operation manual for mounting method. Note 4) Refer to page 50 for details on enclosure.

SI Unit common Nil

Note) Max. number of stations depends on the number of solenoids. Add the option symbol “-K” when the combination of single wiring and double wiring is specified. • When “Without SI Unit” is specified, I/O Unit cannot be mounted. • When “Without SI Unit” is specified, Valve Plate to connect the manifold and SI Unit is not mounted. Refer to page 51 for mounting method.

Note) Without SI Unit, the symbol is nil.

End Plate type Nil

Refer to the catalog of each series for details on manifold solenoid valve specifications, Common Precautions and Specific Product Precautions.

Positive common Negative common

2 3

No End Plate Power supply with M12 connector (Max. supplied current 2 A) Power supply with 7/8 inch connector (Max. supplied current 8 A)

Note) Without SI Unit, the symbol is nil.

For Series EX600 Series VQC2000

800.695.3055

RoHS

How to Order Manifold

VV5QC 2 1 08 C8 SD6Q 2 N 1 Series VQC2000 Option Nil

Base mounted plug-in

B Note 2) D Note 3) D0 D Note 4) K Note 5) N R Note 6) S Note 7) T Note 8)

Stations 01

Stations 1 station

24 Note)

24 stations

Symbol

Note) Max. number of stations depends on the wiring specifications.

Cylinder port size C4 C6 C8 CM L4 L6 L8 B4 B6 B8 LM

With ø4 One-touch fitting With ø6 One-touch fitting With ø8 One-touch fitting Mixed sizes and with port plug Top ported elbow with ø4 One-touch fitting Top ported elbow with ø6 One-touch fitting Top ported elbow with ø8 One-touch fitting Bottom ported elbow with ø4 One-touch fitting Bottom ported elbow with ø6 One-touch fitting Bottom ported elbow with ø8 One-touch fitting Mixed port sizes of elbow piping

Note 1) Indicate the sizes on the manifold specification sheet in the case of “CM” and “LM”. Note 2) Symbols for inch size are as follows. • N3: ø5/32" • N7: ø1/4" • N9: ø5/16" • NM: Mixed sizes The top ported elbow is LN

and the bottom ported elbow is BN .

For NM, specify it on the manifold specification sheet.

Kit type Kit type

S kit

Symbol

Specifications

Without SI Unit SD60 SD6Q For DeviceNet™ SD6N For PROFIBUS DP SD6V For CC-Link SD6ZE For EtherNet/IP™ SD6D For EtherCAT

Stations

Max. number of Max. number stations for special of solenoids wiring specifications

1 to 12 stations

24 stations

Nil

None 1 station

9 stations

Note 2) SI Unit is not included in I/O Unit stations. Note 3) When I/O Unit is selected, it is shipped separately and assembled by customer. Refer to the attached operation manual for mounting method. Note 4) Refer to page 50 for details on enclosure.

SI Unit common

• When “Without SI Unit” is specified, Valve Plate to connect the manifold and SI Unit is not mounted. Refer to back page 51 for mounting method.

Nil

End Plate type No End Plate Power supply with M12 connector (Max. supplied current 2 A) Power supply with 7/8 inch connector (Max. supplied current 8 A)

Note) Without SI Unit, the symbol is nil.

I/O Unit stations

Note 1) Without SI Unit, the symbol is nil.

• When “Without SI Unit” is specified, I/O Unit cannot be mounted.

2 3

Note 1) When two or more symbols are specified, indicate them alphabetically. Example) “-BRS” Note 2) When the back pressure check valve is used only for specified station, specify the back pressure check valve part number, and specify the station number to which the valve is mounted, on the manifold specification sheet. Note 3) When selecting the DIN rail mounting (with DIN rail) of the VQC2000 series with the End Plate to a power supply 7/8 inch connector, 9 I/O Unit stations will result in a total of 23 valve stations. With 24 stations, the DIN rail mounting (with DIN rail) cannot be indicated, so please exercise caution. (Refer to “DIN Rail Overall Length” on page 44.) Note 4) Specified station number shall be longer than manifold station number. Note 5) When single wiring and double wiring are mixed, specify wiring type of each station on the manifold specification sheet. Note 6) When the external pilot type is selected, also specify the external pilot type for valves. Note 7) Built-in silencer type does not satisfy IP67. Note 8) 2 ports for SUP and EXH are included on both sides of U side (cylinder port and coil side) with ø12 one-touch fittings. Note 9) When specification change from no DIN rail type to DIN rail mounting type, please consult SMC. Note 10) When “Without SI Unit (SD60)” is specified, “With DIN rail (D)” cannot be selected. Note 11) DIN rail is not attached (but shipped together) on the manifold in the case of with DIN rail. Refer to the VQC series catalog (CAT.ES11-101) for mounting method.

Note) Max. number of stations depends on the number of solenoids. Add the option symbol “-K” when the combination of single wiring and double wiring is specified.

Nil

Positive common Negative common

Note) Without SI Unit, the symbol is nil.

Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

For Series EX600

800.695.3055

Series VQC4000

RoHS

How to Order Manifold

VV5QC 4 1 16 02

SD6Q 2 N 1

Series VQC4000 Option Nil

Base mounted plug-in

K Note)

Stations Symbol

Note) When single wiring and double wiring are mixed, specify wiring type of each station on the manifold specification sheet.

Stations 1 station

I/O Unit stations

16 Note) 16 stations

Nil

Note) Max. number of stations depends on the wiring specifications.

9 stations

Note 3) When I/O Unit is selected, it is shipped separately and assembled by customer. Refer to the attached operation manual for mounting method. Note 4) Refer to page 50 for details on enclosure.

Thread type F T

None 1 station

Note 2) SI Unit is not included in I/O Unit stations.

With ø8 One-touch fitting With ø10 One-touch fitting With ø12 One-touch fitting 1/4 3/8 Bottom ported 1/4 Mixed sizes

Nil

Note 1) Without SI Unit, the symbol is nil.

Cylinder port size C8 C10 C12 02 03 B CM

None Special wiring specifications (Except double wiring)

SI Unit common

Rc G NPT/NPTF

Nil

Positive common Negative common

Note) Without SI Unit, the symbol is nil.

Kit type Kit type

S kit

Symbol

Specifications

Max. number of Max. number Stations stations for special of solenoids wiring specifications

SD60 Without SI Unit SD6Q For DeviceNet™ SD6N For PROFIBUS DP 1 to 12 stations SD6V For CC-Link SD6ZE For EtherNet/IP™ SD6D For EtherCAT

End Plate type Nil

16 stations

2 3

No End Plate Power supply with M12 connector (Max. supplied current 2 A) Power supply with 7/8 inch connector (Max. supplied current 8 A)

Note) Without SI Unit, the symbol is nil.

Refer to the catalog of each series for details on manifold solenoid valve specifications, Common Precautions and Specific Product Precautions.

H.H. Barnum Complete Manifold Assemblies 800.695.3055

For complete manifold assemblies please contact our Tech support group at tech.support@hhbarnum.com with your requirements. Our sta ﬀ can help you conﬁgure a completely assembled and tested manifold with the op ons you need. We will need the following informa on to get started or we can generate a part number and bill of materials from your schema c. 1) Valve series or we can recommend one based on your applica on •

VQC2000 series = 1) Not available with NPT Ports 2) Not available with Interface regulators ngs are 8mm/ 5/16” inch 3) Largest one touch ngs are 4mm/ 5/32” inch 4) Smallest one touch

•

VQC4000 series = 1) Available with interface regulators, no dual interface regulator 2) Largest one touch ngs are 10mm/ 3/8” inch 3) Smallest one touch ngs are 6mm/ ¼” inch

•

SV2000 series = 1) Not available with NPT Ports 2) Available with interface regulators, no dual interface regulator 3) Largest one touch ngs are 8mm/ 5/16” inch 4) Smallest one touch ngs are 4mm/ 5/32” inch

•

SV3000 Series = 1) Not available with NPT ports 2) Available with interface regulators, no dual interface regulator ngs are 10mm/ 3/8” inch 3) Largest one touch ngs are 6mm/ ¼” inch 4) Smallest one touch

2) Number of valves per manifold - The VQC series has 24 available outputs for valves and the SV series has 32 available outputs for valves. 3) Valve conﬁgura on on each sta on – we can recommend best prac ce for your applica on if this is not known. • • • • •

Single solenoid, two posi on, spring return, 5/4 way Double solenoid, two posi on, detent, 5/4 way Double solenoid, three posi on, spring center 5/4 way – all ports blocked in the center posi on Double solenoid, three posi ons, spring center 5/4 way –exhaust cylinder ports in the center posi on. Double solenoid, three posi on, spring center, 5/4 way – pressure to both cylinder ports in the center posi on

H.H. Barnum Complete Manifold Assemblies 800.695.3055

-continued-

4) Accessories for valve manifold required (sandwich regulators, ﬂow controls, supply spacers etc.)

5) port size and thread type or specify

ngs

6) communica on needed • 25 pin D sub – specify cable length (1.5m, 3m, 5m, 10m) • Terminal box • Device net (EX250, EX600,) • Ethernet (EX250, EX600) • Proﬁbus (EX250, EX600) • Proﬁnet (EX245) • Other op ons are available

7) if serial interface is needed then specify type of I/O ( 32 max for EX250, 144 max for EX60 0 on a single manifold) • Number of Inputs (M8 or M12 connectors) • Number of outputs (M8 0r M12 connectors) • Analog is available for EX600

8) Aux Connector for EX600 = 5pin M12, 5pin MINI, 4pin MINI =

** Manifold is built le to right, unless noted diﬀerent in drawing **

Power Clamp Cylinder 800.695.3055

Series CKZT40 & CKZ2N

How to Order ø40 ø50 ø63 ø80 Cylinder Port Nil TN

G NPT

CKZT 40 TN (NAAMS) CKZ2N 63 TF

120

A A002 Arm Style – Blank-Without Arm – Arm Code (See attached code)

Slim Line Power Clamp

Note 1) Please indicate appropriate

Bore size

arm position and arm code in

50 Equivalent to 50mm 63 Equivalent to 63mm 80 Equivalent to 80mm

serial as following example in case of D type arm position. Note 2) Not installed when delivered.

A A001 C A002

Cylinder Port Nil TF

NPT G

L Arm L Side Position R Arm R Side Position

Arm OpeningAngle 30 45 60 75 90 105 120 135

30° 45° 60° 75° 90° 105° 120° 135°

Arm Mounting Position (A,B,C,D) A

Arm Position R Right

L Left

D Both Side

Note 1) See below "Arm Mounting Position".

Type of Switch T P B

Turck 24VDC PNP P&F BalluffP

Clamp Arms 800.695.3055

CKZT 40

A015

Mounting hole D2 D1 6 7 S* B 10.2 8

Power clamp cylinder European type Bore size 40 ø40

H 16 20

* For A015, S Type only

Arm position Right

øD1 øD2

Offset A015 Offset 15 A045 Offset 45

Center

øD1 øD2

Left

CKZ2N

øD øD H

Series

Part Number (Arm) Bore SMC Part size Number

CKZ-50A001 CKZ-50A002 CKZ-50A003 CKZ-50A004 CKZ-50A005 CKZ-50A006 CKZ-50A007 CKZ-50A008 CKZ-50A009 CKZ-50A010 CKZ-50A011 CKZ-50A012 CKZ-50A013 CKZ-50A014 CKZ-50A015 CKZ-50A016 CKZ-50A017 CKZ-50A018 CKZ-63A001 CKZ-63A002 CKZ-63A003 CKZ-63A004 CKZ-63A005 CKZ-63A006 CKZ-63A007 CKZ-63A008 CKZ-63A009 CKZ-63A010 CKZ-63A011 CKZ-63A012 CKZ-63A013 CKZ-63A014 CKZ-63A015 CKZ-63A016 CKZ-63A017

Code

NAAMS Ref No.

A001 A002 A003 A004 A005 A006 A007 A008 A009 A010 A011 A012 A013 A014 A015 A016 A017 A018 A001 A002 A003 A004 A005 A006 A007 A008 A009 A010 A011 A012 A013 A014 A015 A016 A017

ACA201M ACA202M ACA203M ACA206M ACA207M ACA208M ACA211M ACA212M ACA213M ACA216M ACA217M ACA218M ACA221M ACA222M ACA223M ACA226M ACA227M ACA228M ACA001M ACA002M ACA003M ACA004M ACA005M ACA006M ACA007M ACA008M ACA009M ACA010M ACA011M ACA012M ACA013M ACA014M ACA015M ACA016M ACA017M

Bore SMC Part size Number

CKZ-63A018 CKZ-63A019 CKZ-63A020 CKZ-63A021 CKZ-63A022 CKZ-63A023 CKZ-63A024 CKZ-63A025 CKZ-63A026 CKZ-63A027 CKZ-63A028 CKZ-63A029 CKZ-63A030 CKZ-63A031 CKZ-63A032 CKZ-63A033 CKZ-63A034 CKZ-63A035 CKZ-63A036 CKZ-63A037 CKZ-63A038 CKZ-63A039 CKZ-63A040 CKZ-63A041 CKZ-63A042 CKZ-63A043 CKZ-63A044 CKZ-63A045 CKZ-63A046 CKZ-63A047 CKZ-63A048 CKZ-80A001 CKZ-80A002 CKZ-80A003 CKZ-80A004

Code

NAAMS Ref No.

A018 A019 A020 A021 A022 A023 A024 A025 A026 A027 A028 A029 A030 A031 A032 A033 A034 A035 A036 A037 A038 A039 A040 A041 A042 A043 A044 A045 A046 A047 A048 A001 A002 A003 A004

ACA018M ACA019M ACA020M ACA021M ACA022M ACA023M ACA024M ACA025M ACA026M ACA027M ACA028M ACA029M ACA030M ACA031M ACA032M ACA033M ACA034M ACA035M ACA036M ACA037M ACA038M ACA039M ACA040M ACA041M ACA042M ACA043M ACA044M ACA045M ACA046M ACA047M ACA048M ACA100M ACA101M ACA102M ACA103M

Bore SMC Part size Number

CKZ-80A005 CKZ-80A006 CKZ-80A007 CKZ-80A008 CKZ-80A009 CKZ-80A010 CKZ-80A011 CKZ-80A012 CKZ-80A013 CKZ-80A014 CKZ-80A015 CKZ-80A016 CKZ-80A017 CKZ-80A018 CKZ-80A019 CKZ-80A020 CKZ-80A021 CKZ-80A022 CKZ-80A023 CKZ-80A024 CKZ-80A025 CKZ-80A026 CKZ-80A027 CKZ-80A028 CKZ-80A029 CKZ-80A030 CKZ-80A031 CKZ-80A032 CKZ-80A033 CKZ-80A034 CKZ-80A035 CKZ-80A036 CKZ-80A037 CKZ-80A038 CKZ-80A039

Code

NAAMS Ref No.

A005 A006 A007 A008 A009 A010 A011 A012 A013 A014 A015 A016 A017 A018 A019 A020 A021 A022 A023 A024 A025 A026 A027 A028 A029 A030 A031 A032 A033 A034 A035 A036 A037 A038 A039

ACA104M ACA105M ACA106M ACA107M ACA108M ACA110M ACA111M ACA112M ACA113M ACA114M ACA115M ACA116M ACA117M ACA118M ACA120M ACA121M ACA122M ACA123M ACA124M ACA125M ACA126M ACA127M ACA128M ACA130M ACA131M ACA132M ACA133M ACA134M ACA135M ACA136M ACA137M ACA138M ACA140M ACA141M ACA142M

Bore SMC Part size Number

CKZ-80A040 CKZ-80A041 CKZ-80A042 CKZ-80A043 CKZ-80A044 CKZ-80A045 CKZ-80A046 CKZ-80A047 CKZ-80A048 CKZ-80A049 CKZ-80A050 CKZ-80A051 CKZ-80A052 CKZ-80A053 CKZ-80A054 CKZ-80A055 CKZ-80A056 CKZ-80A057 CKZ-80A058 CKZ-80A059 CKZ-80A060 CKZ-80A061 CKZ-80A062 CKZ-80A063 CKZ-80A064 CKZ-80A065 CKZ-80A066 CKZ-80A067 CKZ-80A068 CKZ-80A069 CKZ-80A070 CKZ-80A071 CKZ-80A072

Code

NAAMS Ref No.

A040 A041 A042 A043 A044 A045 A046 A047 A048 A049 A050 A051 A052 A053 A054 A055 A056 A057 A058 A059 A060 A061 A062 A063 A064 A065 A066 A067 A068 A069 A070 A071 A072

ACA143M ACA144M ACA145M ACA146M ACA147M ACA148M ACA150M ACA151M ACA152M ACA153M ACA154M ACA155M ACA156M ACA157M ACA158M ACA160M ACA161M ACA162M ACA163M ACA164M ACA165M ACA166M ACA167M ACA168M ACA170M ACA171M ACA172M ACA173M ACA174M ACA175M ACA176M ACA177M ACA178M

Standard item Made to order Symbol is described at end of model number.

Stainless Steel Body Cylinder 800.695.3055

How to Order

B 075

NCM

Without auto switch

M9PW

B 075 02 00 C

NCDM

With auto switch

02 00 C

Built-in magnet

Number of auto switches

Type Nil Standard cylinder K Non-rotating rod

Nil 2 pcs. S 1 pc. n “n” pcs.

Mounting B C E R W

Front nose mount Rear pivot Double end Block mount , Double rod, Double end

Auto switch

Omit the D from the switch part number when ordering switch mounted on the cylinder.

Rod boot ,

Nil Without J Nylon boot K Neoprene boot

Double -acting only. Block mount (R) not available with non-rotating (K) option. Not available on 2” bore size.

Bore Size

044 056 075 088 106 125 150 200

7/16” 9/16” 3/4” 7/8” 1-1/16” 1-1/4” 1-1/2” 2”

Not offered with block mount. Not offered on 2” bore.

Actuation Nil Double acting S Spring return T Spring extend

Cushion Stroke (inches)

Nil Without rubber bumper C Rubber bumper

Options

(Example: 04 = 4 inch stroke)

Stroke (Hundredths of an inch) (Example: 25 = 0.25 (1/4) inch stroke)

Parts No. of Auto Switch Mounting Band Auto switch part number D-M9PW D-M9NW

BJ2-012 BJ3-1

Bore size 075 088

056

044

BJ2-015 BJ3-1

106

125

Standard Stroke Mounting

150

200

NBM2-075 NBM2-088 NBM2-106 NBM2-125 NBM2-150 NCMB-200 BJ3-1 BJ3-1 BJ3-1 BJ3-1 BJ3-1 BJ3-1

Max. stroke as standard

1/2, 1, 2, 3, 4, 5, 6 1/2, 1, 2, 3, 4, 5, 6 Head side pivot (C) 7, 8, 10, 12 Double rod (W) 1/2, 1, 2, 3, 4, 5, 6 Block mount (R) 1/2, 1, 1 1/2, 2, 3, 4, 5, 6 Rod side nose (B) Double end (E)

X169US

High temperature Low temperature Low friction Stainless steel piston rod & nut Rotated ports , Long stroke Rear pivot mount (C) without clevis pin Dimensional interchange to other manufacturer’s magnetic reed switch cylinders

Available only with B or C mounting. Not offered on 2” bore size.

(in)

Standard stroke

XB6 XB7 XB9 XC6 X103US X142US X155US

Long stroke Spring extend / retract

12 12

20 40

Note) Minimum stroke for mounting auto switches: 0.6 inch for 2 switches, 0.4 inch for one switch.

Solid state switch

Type

Special function

Electrical entry

Indicator light

Applicable Auto Switch Wiring (Output)

Lead wire length (m) Auto switch Pre-wire 0.5 3 5 None connector model AC (Nil) (L) (Z) (N)

Load voltage DC

3-wire (NPN) Diagnostic indication Grommet Yes 24 V 5 V, 12 V — (2-color indication) 3-wire (PNP)

D-M9NW

—

D-M9PW

—

Applicable load IC circuit

Relay, PLC

Solid state switches marked with “ ” are produced upon receipt of order. * Mounting band required with ordering seperate switch

NFPA Interchangeable Air Cylinder 800.695.3055

How to Order

Without auto switch

NCA1

B 150 04 00

With auto switch

NC D A1

B 150 04 00

M9PW Options

Built-in magnet

Oversize rod High temperature Low temperature Low speed Stainless steel piston rod Adjustable stroke extend** Adjustable stroke return** Dual operation double rod** Dual operation single rod** Viton seals Metal coil scraper Special trunnion location** Non-rotating oversize rod Stainless steel piston rod X130US Tie rods & nuts, Cushion needle ** Refer to Catalog N304 individual section for "How to Order". XB5 XB6 XB7 XB9 XC6 XC8 XC9 XC10 XC11 XC22 XC35 X46US X119US

Type Nil Standard K Non-rotating rod W Double rod M Male rod stud Non-rotating rod only available for 150, 200 and 250 bore sizes

Mounting style B L F G R D T C X S U J

Basic Foot Front flange Rear flange Side tapped Double detachable rear clevis Center trunnion Single detachable rear clevis Double rear clevis Side lug Rod side trunnion Head side trunnion

MXO MS1 MF1 MF2 MS4 MP2 MT4 MP4 MP1 MS2 MT1 MT2

Bore size 1-1/2" 2" 2-1/2" 3-1/4" 4"

150 200 250 325 400

No. of Switches

Stroke (inches) Auto Switch

(Example: 04 = 4 inch stroke)

Omit the D from the switch part number when ordering switch mounted on the cylinder

Stroke (Hundredths of an inch) (Example: 25 = 0.25 (1/4) inch stroke)

Mounting Bracket Part No.

Double clevis (MP2) Single clevis Side lug Double clevis (MP1)

Rod Boot

Part no.

Mounting bracket Bore size 150 (1.5") Foot NCA1-L150 Flange NCA1-F150

2 pcs. 1 pc. "n" pcs.

Nil S n

Up to 14" bore size available. Refer to CAT. N304-EX .

200 (2")

250 (2.5")

325 (3.25")

Nil Without rod boot J Nylon rod boot K Neoprene rod boot

400 (4")

NCA1-L200

NCA1-L250

NCA1-L325

NCA1-L400

NCA1-F200

NCA1-F250

NCA1-F325

NCA1-F400

NCA1-D150

NCA1-D200

NCA1-D250

NCA1-D325

NCA1-D400

NCA1-C150

NCA1-C200

NCA1-C250

NCA1-C325

NCA1-C400

NCA1-S150

NCA1-S200

NCA1-S250

NCA1-S325

NCA1-S400

NCA1-X150

NCA1-X200

NCA1-X250

NCA1-X325

NCA1-X400

Cushion Nil N H R

Both ends None Head end Rod end

Solid state switch

Type

Special function

Electrical entry

Indicator light

Applicable Auto Switch Lead wire length (m) Auto switch Pre-wire 0.5 3 5 None connector model AC (Nil) (L) (Z) (N)

Load voltage

Wiring (Output)

3-wire (NPN) Diagnostic indication Grommet Yes 24 V 5 V, 12 V — (2-color indication) 3-wire (PNP)

D-M9NW

—

D-M9PW

—

IC circuit

Relay, PLC

Solid state switches marked with “ ” are produced upon receipt of order. (in)

Standard Stroke ) n i (

Applicable load

z i s

e r o

o r t s

1.5"

1, 2, 3, 4, 5, 6, 8, 10, 12, 14, 16, 18, 20, 24

2", 2.5"

1, 2, 3, 4, 5, 6, 8, 10, 12, 14, 16, 18, 20, 24

3.25", 4"

1, 2, 3, 4, 5, 6, 8, 10, 12, 14, 16, 18, 20, 24, 28,

d r a

a t S e k

o r t s

i x

Please consult with SMC.

Auto Switch Mounting Bracket Part No. Bore size (in) Model no. D-M9

150 (1.5") BMB5-032

200 (2")

250 (2.5")

325 (3/25")

400 (4")

BA7-040

BA7-063

BA7-063 Refer to catalog N304 for details and option compatibility.

* Mounting bracket required when ordering seperate switch

Compact Cylinder Double Acting, Single Rod

800.695.3055

Series NCQ8

How to Order

NCQ8 B

Without auto switch

With auto switch

056 025

NCDQ8 B Z 056 025

F9PW S X-Option

Built-in magnet

Standard Nil XB6 Note 4) High temp. With scraper XC4 Note 4) XB6: Not available with magnet. *For detailed made to order specifications, refer to page 46.

Mounting B A C E M N

Through-hole Both ends tapped Rear clevis Front screw clearance hole Rear screw clearance hole Through screw clearance hole

Number of auto switches

Overall length type Nil Z

Nil S n

Standard Super compact

Nominal bore size

Auto switch type

056 9/16" 075 3/4" 106 1-1/16" 150 1-1/2" 2" 200 250 2-1/2"

Nil

Body option

Cylinder stroke (in)

Solid state switch

Indicator light

Electrical entry

Wiring (Output)

Standard (Female rod end) Rubber bumper Male rod end Note 2) Rubber bumper is not available with type "Z"(Super Compact type). Consult with your SMC sales representative. Note 3) Stroke will be reduced by 0.06" for rubber bumper type. *Combination of body options (CM) is available.

Lead wire length (m) Auto switch Pre-wire 0.5 3 5 None connector model AC (Nil) (L) (Z) (N)

Load voltage DC

3-wire (NPN) Diagnostic indication Grommet Yes 24 V 5 V, 12 V — (2-color indication) 3-wire (PNP)

D-F9NW

—

D-F9PW

—

RCSK-015 RCSK-02 RCSK-03 RCSK-04 RCSK-05

Applicable bore size Clevis (1) 056 (9/16") RCS-015 075 (3/4") RCS-02 106 (1-1/16") RCS-03 150 (1-1/2") RCS-04 200 (2"), 250 (2-1/2") RCS-05

Including Pin (1) Snap rings (2) PC-01 PS-015 PC-02 PS-02 PC-03 PS-03 PC-03 PS-03 PC-05 PS-05

PRA-015 PRA-02 PRA-03 PRA-05

Applicable bore size 056 (9/16") 075 (3/4") 106 (1-1/16"), 150 (1-1/2") 200 (2"), 250 (2-1/2")

IC circuit

Relay, PLC

Double Rod Clevis (Rod eye) Kit no. RCDK-015 RCDK-02 RCDK-03 RCDK-04 RCDK-05

Rod Clevis Pin Kit no.

Applicable load

Solid state switches marked with “ ” are produced upon receipt of order.

Single Rod Clevis (Rod eye) Kit no.

Omit the D from the switch part number when ordering switch mounted on the cylinder

C Note 2, 3) M

Applicable Auto Switch Special function

Without auto switch (Built-in magnet cylinder)

Nil

Symbol Stroke Symbol Stroke Symbol Stroke Symbol Stroke 1/8" 5/8" 1-1/4" 2-1/2" 012 062 125 250 3/4" 1-1/2" 3" 025 Note1) 1/4" 075 150 300 3/8" 7/8" 1-3/4" 3-1/2" 037 087 175 350 1/2" 1" 2" 4" 050 100 200 400 Note 1) With switch is available on strokes 025(1/4") and greater.

Type

2 pcs. 1 pc. “n” pcs.

Including Snap rings (2) Pin (1) PC-01 PS-015 PC-02 PS-02 PC-03 PS-03

PS-05

PC-05

48 47

Applicable bore size Clevis (1) 056 (9/16") RCD-015 075 (3/4") RCD-02 106 (1-1/16") RCD-03 150 (1-1/2") RCD-04 200 (2"), 250 (2-1/2") RCD-05

Including Pin (1) Snap rings (2) PC-01 PS-015 PC-02 PS-02 PC-03 PS-03 PC-03 PS-03 PC-05 PS-05

Compact Cylinder

800.695.3055

Series CQ2 How to Order

Without auto switch

NCQ2 B

30 D

Without auto switch ø32 to ø100

NCQ2 B

30 D

With auto switch

NCDQ2 B

30 D

Z M9PW

ø12 to ø25

Auto switch

PT, metric

NPT, inch

Nil (Built-in magnet)

B A L

F G D

Through-hole (Standard) Both ends tapped Foot

Mounting Rod flange Head flange Double clevis

Auto switch mounting groove

Pneumatic Air-hydro Note 1)

Port thread type TN TF F

Without switch

With switch With switch With switch With switch

32 40 50 63 80 100

ø12 to ø25 M thread Rc ø32 to ø100 NPT G Built-in one-touch fittings Note 2 )

Bore size

type. For cylinders without auto switch, M threads are compatible only for ø32-5 mm stroke.

Foot Note 1)

Model -

CQ2 CQ2 CQ2 CQ2 CQ2 CQ2 CQ2 CQ2 CQ2 CQ2 CQ2 CQ2 CQ2 CQ2

D DZ D DZ D DZ D DZ DZ DZ DZ DZ DZ DZ

CQ-LZ12 CQ-LZ16 CQ-LZ20 CQ-LZ25

CQ-L100

F C M

Flange

Standard stroke

With rubber bumper Rod end male thread

12,16

5,10,15,20,25,30

Combination of body options (“CM”, “FC”,

20,25

5,10,15,20,25,30 40,45,50

Note 4) Air-hydro type with rubber bumper is not available.

32,40 50,63 80,100

Double clevis

5,10,15,20,25,30 35,40,45,50,75,100 10,15,20,25,30 35,40,45,50,75,100

Note 1) When ordering a foot bracket, the required quantity will be different depending on the bore size.

CQ-F012 CQ-F016 CQ-F020 CQ-F025

(Compared with SMC CQ2 series)

NEW

CQ-F032 CQ-F040 CQ-F050 CQ-F063 CQ-F080 CQ-F100

Existing model

CQ-D100

Solid state switch

Special function

Electrical entry

Indicator light

Applicable Auto Switch Type

Wiring (Output)

“n” pcs.

Nil

Double acting

Cylinder stroke

Note 2) Bore sizes available with one-touch fittings are ø32 to ø63. Besides, it is not possible to

Mounting Brackets/Part No.

S n

Body option

Action D

Nil

Refer to the next page for details.

Bore size 12 12 mm 16 16 mm 20 20 mm 25 25 mm 32 32 mm 40 40 mm 50 50 mm 63 63 mm 80 80 mm 100 100 mm

Number of auto switches

Note 5) The made-to-order, heat resistant auto switch -XB14 is not applicable.

Note 1) Bore sizes available for airhydro type are ø20 to ø100.

Bore size (mm)

ø12 to ø25 2 surfaces ø32 to ø100 4 surfaces

Cylinder mounting bolts are not included. Order them separately referring to “Mounting Bolt for C(D)Q2B” on pages 5 and 10. Type

Nil

Without auto switch

Refer to the below table for applicable auto switches.

Lead wire length (m) to catalog N320 and Best Pn * Refer Auto switch Pre-wire Applicable 0.5 3 5 None connector model AC load (Nil) (L) (Z) (N)

Load voltage DC

3-wire (NPN) Diagnostic indication Grommet Yes 24 V 5 V, 12 V — (2-color indication) 3-wire (PNP)

D-M9NW

—

D-M9PW

—

IC circuit e

Relay, PLC

Solid state switches marked with “ ” are produced upon receipt of order.

Compact Guide Cylinder Series MGP

800.695.3055

How to Order

30 Z M9PW

MGP M 25 N

Number of auto switches Nil S

Bearing type M L

Slide bearing Ball bushing bearing

Heavy duty guide rod type w/slide bearing

High precision ball bushing type

Auto switch Nil Without auto switch (Built-in magnet) Omit the D from the switch part number when ordering switch mounted on the cylinder

Cylinder stroke (mm)

Bore size 12 16 20 25 32

40 50 63 80 100

12 mm 16 mm 20 mm 25 mm 32 mm

2 pcs. 1 pc.

Bore size (mm) Standard stroke (mm) 12, 16 10, 20, 30, 40, 50, 75, 100, 125, 150, 175, 200, 250 20, 25 20, 30, 40, 50, 75, 100, 125, 150, 175, 200, 250, 300, 350, 400

40 mm 50 mm 63 mm 80 mm 100 mm

32 to 100

25, 50, 75, 100, 125, 150, 175, 200, 250, 300, 350, 400

Thread type M5 x 0.8 Rc NPT G

Nil N TF

For bore sizes 12 and 16, M5 x 0.8 is only available.

Solid state switch

Type

Special function

Electrical entry

Indicator light

Applicable Auto Switch Wiring (Output)

Load voltage AC

3-wire (NPN) Diagnostic indication Grommet Yes 24 V 5 V, 12 V — (2-color indication) 3-wire (PNP)

Lead wire length (m) to catalog N320 and Best Pn * Refer Auto switch Pre-wire Applicable 0.5 3 5 None connector model load (Nil) (L) (Z) (N)

D-M9NW

—

D-M9PW

—

IC circuit e

Relay, PLC

Solid state switches marked with “ ” are produced upon receipt of order.

Rotary Clamp Cylinder: Double Guide Type 800.695.3055

Series MK2T

How to Order

MK2T B 20

10 R N

M9PV

Rotary clamp cylinder Double guide type

Number of auto switches Nil

Mounting bracket B G

Through-hole/Both ends tapped common (Standard) Head end flange

Auto switch type

Mounting bracket is included, (but not assembled).

Nil

Bore size Body option Nil

Cylinder port M thread Rc NPT G

TN TF

10 20 50

Clamp stroke 10 mm 20 mm 50 mm

Standard (Female thread) With arm

Arms are included when shipped, (but not assembled).

ø20, ø25 ø32 to ø63

Rotary direction (Unclamp Clamp)

Clamp stroke Symbol

Without auto switch (Built-in magnet)

For applicable auto switch models, refer to the below table.

20 20 mm 40 40 mm 25 25 mm 50 50 mm 32 32 mm 63 63 mm

Nil

2 pcs. 1 pc.

R L

Applicable bore size ø20 to ø40 ø20 to ø63 ø50 to ø63

Clockwise Counterclockwise

Solid state switch

Type

Special function

Electrical entry

Indicator light

Applicable Auto Switches Wiring (Output)

3-wire (NPN) Grommet Yes 3-wire (PNP) 3-wire (NPN) Diagnostic indication (2-color indication) 3-wire (PNP)

Auto switch model Lead wire length (m) Direct mounting Pre-wired Applicable load ø20 to ø63 0.5 1 3 5 connector DC Perpendicular In-line (Nil) (M) (L) (Z) 5 V, M9NV M9N — 12 V M9PV M9P — Relay, 24 V IC circuit PLC 5 V, M9NWV M9NW 12 V M9PWV M9PW

Load voltage

Option/Arm Bore size (mm)

20 25 32 40 50 63

Mounting Bracket/Flange Part no.

MK-A020 MK-A032 MK-A050 MK2T-A063

Accessories

Bore size (mm)

Clamp bolt, Hexagon socket head cap screw, Hexagon nut, Spring washer

20 25 32 40 50 63

Part no.

Accessories

CQS-F020 CQS-F025 MK2T-F032 Hexagon socket MK2T-F040 head cap screw MK2T-F050 MK2T-F063

Air Slide Table Series MXQ

800.695.3055

How to Order

MXQ 12 L

50 AS FR

M9PW

S Number of auto switches

Symmetric type Nil L

Nil S n

Standard type Symmetric type

2 pcs. 1 pc. “n” pcs.

Auto switch Without auto switch Nil Omit the D from the switch part number when ordering switch mounted on the cylinder

Bore size/Stroke (mm) 6 8 12 16 20 25

10, 20, 30, 40, 50 10, 20, 30, 40, 50, 75 10, 20, 30, 40, 50, 75, 100 10, 20, 30, 40, 50, 75, 100, 125 10, 20, 30, 40, 50, 75, 100, 125, 150 10, 20, 30, 40, 50, 75, 100, 125, 150

Functional option Standard type Nil With buffer F With end lock R (2) Axial piping type P FR (2) With buffer and end lock FP With buffer, Axial piping type Note 2) W/ end lock is not available in Series MXQ6.

Adjuster option Without adjuster Nil AS Extension end AT Rubber stopper Retraction end A Both ends BS(1) Extension end BT (1) Shock absorber Retraction end Both ends B (1) Extension end CS Metal stopper Retraction end CT Both ends C Note 1) W/ shock absorber is not available in Series MXQ6.

Option Combinations Functional option

Adjuster option

Nil

Nil (3)

AS, CS

(3)

AT, CT (3)

A, C BS BT B

: Available, : Not available Note 3) With the combination of buffer mechanism and extension end stroke adjuster, the buffer stroke decreases by the amount of stroke adjusted with the extension end stroke adjuster.

MXQ

AS 12 L

Adjustment range

Adjuster option AS AT BS BT CS CT

X11 Symmetry

Extension end Retraction end Extension end Shock absorber Retraction end Extension end Metal stopper Retraction end Rubber stopper

Nil

Standard type Symmetric type

-X11 -X12

Standard Optional

Note 1) -X12 (adjustment range: 25mm) is not available with series MXQ6. Note 2) -X11 and -X12 are not available with shock absorber. Note 3) Series MXQ6 is not available with shock absorber. Note 4) -X11 and -X12 are not available as built-in types. Note 5) Refer to pages 33 and 35 for dimensions.

Applicable cylinder bore size 6 8 12 16 20 25

5mm 15mm 25mm

ø6 ø8 ø12 ø16 ø20 ø25

Solid state switch

Type

Special function

Electrical entry

Indicator light

Applicable Auto Switch Wiring (Output)

Lead wire length (m) to catalog N320 and Best Pn * Refer Auto switch Pre-wire Applicable 0.5 3 5 None connector model AC load (Nil) (L) (Z) (N)

Load voltage DC

3-wire (NPN) Diagnostic indication Grommet Yes 24 V 5 V, 12 V — (2-color indication) 3-wire (PNP)

D-M9NW

—

D-M9PW

—

IC circuit e

Relay, PLC

Solid state switches marked with “ ” are produced upon receipt of order.

Slide Table How to Order

800.695.3055

Compact precision Air slide table

MX PJ 6

MX P 12

M9PW S

Slide table F Low profile slide table H Compact slide table P Precision slide table W/Y Long stroke slide table

Number of auto switches 2 pcs. 1 pc. S n pcs. n

Nil

* If the MXP6-5 is ordered with 2 switches, the D-M9 or D-M9 V must be used because of space restrictions.

Standard Stroke Table

Bore Stroke *6 5,10 10 10,20 12 15,25 16 20,30

Auto switch number Without auto switch

Nil

For the applicable auto switch model, refer to the table below. Omit the D from the switch part number when ordering switch mounted on the cylinder

* MXPJ6 Only offered in those strokes as standard

One side centralized piping, switch rail One side centralized piping, with switch rail N* One side centralized piping, without switch rail

Adjuster option* Rubber stopper Nil B** Shock absorber Metal stopper C

Nil

* Not applicable to mount auto switch without magnet and rail.

* Available only one side for MXP6. ** Shock absorber not available with MXP6 and MXP8. * Auto switch not available with MXPJ6 .

Refer to catalgs MXF E242 MXH E276A MXJ ES20-185A MXP ES20-125B MXQ ES20-132B MXS E235C MXW E243 MXY ES20-167A

Solid state switch

Type

Special function

Electrical entry

Indicator light

Applicable Auto Switch Wiring (Output)

Lead wire length (m) to catalog N320 and Best Pn * Refer Auto switch Pre-wire Applicable 0.5 3 5 None connector model AC load (Nil) (L) (Z) (N)

Load voltage DC

3-wire (NPN) Diagnostic indication Grommet Yes 24 V 5 V, 12 V — (2-color indication) 3-wire (PNP)

D-M9NW

—

D-M9PW

—

IC circuit e

Relay, PLC

Solid state switches marked with “ ” are produced upon receipt of order.

Parallel Grippers How to Order

800.695.3055

Standard Body ø6 to ø40mm Bore

Parallel Gripper – Series MHZ2

Size 6:

MHZ 2

–

– M9PW

Sizes 10 to 25:

MHZ 2

– 16

– M9PW

Sizes 32 & 40:

MHZ 2

– 32

– M9PW Number of auto switches

Number of fingers

Nil S

2 pcs. 1 pc.

Bore size 6 10 16 20 25 32 40

6mm 10mm 16mm 20mm 25mm 32mm 40mm

Auto switch model For the applicable auto switch model, refer to the table below. Omit the D from the switch part number when ordering switch mounted on the cylinder

Action D S C

Double acting Single acting (N.O.) Single acting (N.C.)

Body option Nil E K M W

Finger option Nil 1 2 3 N N1 N2

Basic type Side tapped mounting Through holes Flat finger Basic type* Side tapped mounting* Through holes*

Basic type End boss side ported* End boss axial one-touch fitting ** End boss axial M5 port End boss axial coaxial fitting **

Single-acting only Double-acting only * D, S action, basic and N type finges only ** basic and N type fingers only

* MHQ2 compatible: ø10 to ø25mm bore sizes only

Solid state switch

Type

Special function

Electrical entry

Indicator light

Applicable Auto Switch Wiring (Output)

Lead wire length (m) to catalog N320 and Best Pn * Refer Auto switch Pre-wire Applicable 0.5 3 5 None connector model AC load (Nil) (L) (Z) (N)

Load voltage DC

3-wire (NPN) Diagnostic indication Grommet Yes 24 V 5 V, 12 V — (2-color indication) 3-wire (PNP)

D-M9NW

—

D-M9PW

—

IC circuit e

Relay, PLC

Solid state switches marked with “ ” are produced upon receipt of order.

Parallel Grippers How to Order

800.695.3055

Compact Body ø6mm Bore without auto switch MHZA 2 – 6 D MHZAJ 2

–

Parallel Gripper – Series MHZA(J)2

With dust cover

Dust cover Chloroprene rubber (CR) Fluorene rubber (FKM) Silicon rubber (S)

Nil F S

Number of fingers

Body option

ø6mm bore

Nil E H K M

Action D S C

Double acting Single acting (N.O.) Single acting (N.C.)

Finger option Basic type Side tapped mounting Through holes Flat finger

Nil 1 2 3

Basic type End boss side ported* End boss sxial hose nipple End boss axial one-touch fitting * End boss axial M5 port

Single-acting only * E and K option with basic fingers only on SMC Now Program

Parallel Gripper – Series MHZJ2

MHZJ

– 16

– M9PW

Number of fingers

Number of auto switches Nil S

Bore size 6 10 16 20 25

6mm 10mm 16mm 20mm 25mm

2 pcs. 1 pc.

Auto switch model

Action D S C

Double acting Single acting (N.O.) Single acting (N.C.)

Dust cover Nil F S

Body option Basic type End boss side ported End boss axial one-touch fitting End boss axial M5 port End boss axial coaxial fitting

Nil E K M W

Chloroprene rubber (CR) Fluorene rubber (FKM) Silicon rubber (S)

Single-acting only Double-acting only

Solid state switch

Type

Special function

Electrical entry

Indicator light

Applicable Auto Switch Wiring (Output)

Lead wire length (m) to catalog N320 and Best Pn * Refer Auto switch Pre-wire Applicable 0.5 3 5 None connector model AC load (Nil) (L) (Z) (N)

Load voltage DC

3-wire (NPN) Diagnostic indication Grommet Yes 24 V 5 V, 12 V — (2-color indication) 3-wire (PNP)

D-M9NW D-M9PW

IC circuit

—

Relay, PLC

— e

Solid state switches marked with “ ” are produced upon receipt of order.

Parallel Grippers 800.695.3055

How to Order

2/3/4 Finger Air Gripper MHS

Wedge Cam Gripper – Series MHS/MHSL

– 20

– M9PW

Stroke Nil L

Number of auto switches

Standard Long stroke*

Nil S

2 pcs. 1 pc.

* MHS3 only.

Number of fingers 2 fingers 3 fingers 4 fingers

2 3 4

Auto switch model For the applicable auto switch model, refer to the table below. Omit the D from the switch part number when ordering switch mounted on the cylinder

Bore size 16 20 25 32 40

16mm 20mm 25mm 32mm 40mm

50 50mm 63 63mm 80 80mm 100 100mm 125 125mm

Double acting

3 Finger Air Gripper with Center Pusher/Dust Cover

MHS HJ 3

– 32

Gripper with Boot and Pusher – Series MHSH3/MHSJ3

– M9PW

Number of auto switches

Configuration H J HJ*

Nil S

Through hole Dust cover Through hole + Dust cover

Auto switch model

* Not available on ø16, ø20, and ø25mm bore sizes.

For the applicable auto switch model, refer to the table below. Omit the D from the switch part number when ordering switch mounted on the cylinder

Number of fingers 3 fingers

16 20 25 32

16mm 20mm 25mm 32mm

Bore size

Dust cover type*

40 50 63 80

Nil F S

40mm 50mm 63mm 80mm

Center pusher type* Nil A B

Solid state switch

Indicator light

Electrical entry

Without center pusher Cylinder type Spring type

* Through hole H, HJ types only; not available on ø16, ø20, and ø25mm bores.

Applicable Auto Switch Special function

Chloroprene rubber (CR) Fluoro rubber (FKM) Silicon rubber (Si)

* Dust cover J, HJ type only.

Double acting

Type

2 pcs. 1 pc.

Wiring (Output)

Load voltage DC

3-wire (NPN) Diagnostic indication Grommet Yes 24 V 5 V, 12 V — (2-color indication) 3-wire (PNP)

Lead wire length (m) to catalog N320 and Best Pn * Refer Auto switch Pre-wire Applicable 0.5 3 5 None connector model load (Nil) (L) (Z) (N)

D-M9NW

—

D-M9PW

—

IC circuit e

Relay, PLC

Solid state switches marked with “ ” are produced upon receipt of order.

Parallel Grippers How to Order

800.695.3055

Low Profile Air Gripper

Rack and Pinion Gripper – Series MHF2

MHF2 – 12 D

–

M9PW

Bore size 8 12 16 20

Number of auto switches

8mm 12mm 16mm 20mm

Nil S

2 pcs. 1 pc.

Auto switch model

For the applicable auto switch model, refer to the table below. Omit the D from the switch part number when ordering switch mounted on the cylinder

Stroke length Nil 1 2

Short stroke Middle stroke Long stroke

Body option Nil R

End ports Side ports

Solid state switch

Type

Special function

Electrical entry

Indicator light

Applicable Auto Switch Wiring (Output)

Lead wire length (m) to catalog N320 and Best Pn * Refer Auto switch Pre-wire Applicable 0.5 3 5 None connector model AC load (Nil) (L) (Z) (N)

Load voltage DC

3-wire (NPN) Diagnostic indication Grommet Yes 24 V 5 V, 12 V — (2-color indication) 3-wire (PNP)

D-M9NW

—

D-M9PW

—

IC circuit

Relay, PLC

Solid state switches marked with “ ” are produced upon receipt of order.

Wide Opening Gripper – Series MHL2

MHL 2 - 16 D

2 - M9PW

Wide opening gripper

Number of auto switches Nil S

Number of fingers 2

2 fingers

Bore size 10 16 20 25 32 40

Applicable auto switch

10mm 16mm 20mm 25mm 32mm 40mm

For the applicable auto switch model, refer to the table below. Omit the D from the switch part number when ordering switch mounted on the cylinder

Opening/Closing stroke (mm)

Acting D

2 pcs. 1 pc.

Double acting

Symbol Nil 1 2

ø10 20 40 60

ø16 30 60 80

ø20 40 80 100

ø25 50 100 120

ø32 70 120 160

ø40 100 160 200

Auto Switch Bracket S BMG2-012

Solid state switch

Type

Special function

Electrical entry

Indicator light

Applicable Auto Switch Wiring (Output)

Lead wire length (m) to catalog N320 and Best Pn * Refer Auto switch Pre-wire Applicable 0.5 3 5 None connector model AC load (Nil) (L) (Z) (N)

Load voltage DC

3-wire (NPN) Diagnostic indication Grommet Yes 24 V 5 V, 12 V — (2-color indication) 3-wire (PNP)

D-M9NW

—

D-M9PW

—

IC circuit e

Relay, PLC

Solid state switches marked with “ ” are produced upon receipt of order.

Angular Grippers 800.695.3055

How to Order Angular Gripper – Series

MHC2 - 20

D - M9P

MHC2

Angular type •

• Number of auto swiches

Bore size • 10 16 20 25

D S

Nil S

10mm 16mm 20mm 25mm

2 pcs. 1 pc.

• Applicable auto switch

For the applicable auto switch model, refer to the table below. Omit the D from the switch part number when ordering switch mounted on the cylinder

Action •

Double acting Single acting (N.O.)

Auto Switch Bracket BMG2-012

Solid state switch

Type

Electrical entry

Special function

Indicator light

Applicable Auto Switch Wiring (Output)

Lead wire length (m) to catalog N320 and Best Pn * Refer Auto switch Pre-wire Applicable 0.5 3 5 None connector model AC load (Nil) (L) (Z) (N)

Load voltage DC

3-wire (NPN)

Diagnostic indication Grommet Yes 24 V 5 V, 12 V — (2-color indication) 3-wire (PNP)

D-M9NW

—

D-M9PW

—

IC circuit

Relay, PLC

Solid state switches marked with “ ” are produced upon receipt of order.

180º Opening Gripper – Series

MHY 2

M9PW

S Number of auto switches

2 fingers

Nil

2 pcs.

1 pc.

Auto switch Nil

Bore size 10

10mm

16mm

20mm

25mm

Finger option Nil: Standard tap mounting

Action D

Without auto switch

For the applicable auto switch model, refer to the table below. Omit the D from the switch part number when ordering switch mounted on the cylinder 2: Opening/closing direction through hole

Double acting

Solid state switch

Type

Special function

Electrical entry

Indicator light

Applicable Auto Switch Wiring (Output)

Lead wire length (m) to catalog N320 and Best Pn * Refer Auto switch Pre-wire Applicable 0.5 3 5 None connector model AC load (Nil) (L) (Z) (N)

Load voltage DC

3-wire (NPN) Diagnostic indication Grommet Yes 24 V 5 V, 12 V — (2-color indication) 3-wire (PNP)

D-M9NW

—

D-M9PW

—

IC circuit

Relay, PLC

Solid state switches marked with “ ” are produced upon receipt of order.

MHY2

Angular Grippers How to Order

800.695.3055

180º Opening Gripper – Series

MHW

M9PW

Number of fingers

Number of auto switches

2 fingers 20 25 32 40 50

20mm 25mm 32mm 40mm 50mm

Auto switch model Finger option Nil 1

Action D

Flat finger type (standard) Right angle finger type

For the applicable auto switch model, refer to the table below. Omit the D from the switch part number when ordering switch mounted on the cylinder

Double acting

Auto Switch Bracket S BMG2-012

Special function

Electrical entry

Indicator light

Applicable Auto Switch Type

2 pcs. 1 pc.

Nil

Bore size

Solid state switch

Lead wire length (m) to catalog N320 and Best Pn * Refer Auto switch Pre-wire Applicable 0.5 3 5 None connector model AC load (Nil) (L) (Z) (N)

Load voltage

Wiring (Output)

3-wire (NPN) Diagnostic indication Grommet Yes 24 V 5 V, 12 V — (2-color indication) 3-wire (PNP)

D-M9NW

—

D-M9PW

—

IC circuit

Relay, PLC

Solid state switches marked with “ ” are produced upon receipt of order.

Toggle Gripper – Series

MHT 2 - 32

MHT2

M9PW

Number of auto switches

Toggle type gripper

Nil

2 pcs. 1 pc.

Number of fingers 2

Auto switch model number

2 fingers

Nil

Body size

Without auto switch (Cylinder with built-in magnet)

For the applicable auto switch model, refer to the table below. Omit the D from the switch part number when ordering switch mounted on the cylinder

32mm 40mm 50mm 63mm

32 40 50 63

Action D

Double acting

Type

Special function

Electrical entry

Indicator light

Applicable Auto Switch

Solid state switch

MHW2

Lead wire length (m) to catalog N320 and Best Pn * Refer Auto switch Pre-wire Applicable 0.5 3 5 None connector model AC load (Nil) (L) (Z) (N)

Load voltage

Wiring (Output)

3-wire (NPN) Diagnostic indication Grommet Yes 24 V 5 V, 12 V — (2-color indication) 3-wire (PNP)

D-M9NW

—

D-M9PW

—

IC circuit e

Relay, PLC

Solid state switches marked with “ ” are produced upon receipt of order.

Rotary Table/Rack-and-Pinion Type 800.695.3055

How to Order

MSQ B 10

M9PW

XN Options Nil XN

Table type High precision type Basic type

PT ports NPT ports

* Except size 1, 2, 3, 7, 10, and 20.

No. of Switches Nil S n

Body size 1 2 3 7 10 20

6mm 8mm 10mm 12mm 15mm 18mm

30 50 70 100 200

21mm 25mm 28mm 32mm 40mm

A AE* H L R

2 pcs. 1 pc. "n" pcs.

Lead wire length Nil L Z

0.5m 3m 5m

Applicable Auto Switch

Rotation stop

Omit the D from the switch part number when ordering switch mounted on the cylinder

Stopper bolts Stopper bolts and axial connection ports External high-energy sock absorbers External low-energy shock absorbers Internal shock absorbers

Connection port position & rotation angle* Nil 2 3 4 5

* MSQA/B 1, 2, 3, & 7 only.

Leave blank if not external shock absorber type 180º standard type 90º standard type 180º symmetrical type 90º symmetrical type

* Leave blank for A stopper bolt type and R internal shock absorber type.

Refer to catalog E20-92F

Type

Special function

Electrical entry

Indicator light

Applicable Auto Switch

Solid state switch

A B

Wiring (Output)

Lead wire length (m) Auto switch Pre-wire 0.5 3 5 None connector model AC (Nil) (L) (Z) (N)

Load voltage DC

3-wire (NPN) Diagnostic indication Grommet Yes 24 V 5 V, 12 V — (2-color indication) 3-wire (PNP)

D-M9NW

—

D-M9PW

—

Applicable load IC circuit

Relay, PLC

Solid state switches marked with “ ” are produced upon receipt of order.

Speed Controller 800.695.3055

How to Order Speed Controller with One-touch Fittings

--- Elbow Type/Universal Type

1F - N

02 - 07

Area code Nil N E

Option

USA (New numbering system) USA (Old numbering system) Europe

Nil S K N

Body size 1 2 3 4

M3, M5 (10-32 NOM) 1/8, 1/4 3/8 1/2

Applicable tube O. D. Metric 23 04 06 08 10 12

Type 2 3

None Sealant Hexaonal lock nut (Width across flat) Electroless nickel plated

Elbow type Universal type

Control type 0 1

Inch 3.2mm 4mm 6mm 8mm 10mm 12mm

Port size

Meter-out Meter-in

With One-touch fittings Port thread Nil F N

PT PF NPT

U10/32 M3 M5 01 02 03 04

01 03 05 07 09 11 13

1/8” 5/32” 3/16” 1/4” 5/16” 3/8” 1/2”

10-32UNF M3 x 0.5 M5 x 0.8 1/8 1/4 3/8 1/2

Elbow/Universal type Elbow type

Universal type

Applicable cylinder Port size Metric size Inch size bore size 3.2 4 6 8 10 12 1/8" 5/32" 3/16" 1/4" 5/16" 3/8" 1/2" (mm)

AS12 1F-M3

AS13 1F-M3

M3 x 0.5

2.5, 4, 6

AS12 1F-M5

AS13 1F-M5

M5 x 0.8

6, 10, 16, 20

AS12 1F-U10/32

AS13 1F-U10/32

10-32 UNF

6, 10, 16, 20

AS22 1F-01

AS23 1F-01

1/8

AS22 1F-02

AS23 1F-02

1/4

20, 25, 32, 40

AS32 1F-02

AS33 1F-02

1/4

40, 50, 63

AS32 1F-03

AS33 1F-03

3/8

40, 50, 63

AS43 1F-04

1/2

63, 80, 100

Applicable tube O.D.

AS42 1F-04

(1)

Note 1) ∗ Elbow type only Note 2) Meter-out and meter-in types can be visually differentiated by the lock nut. The lock nut on the meter-out type is electroless nickel plated, while the meter-in type is black zinc chromate plated.

20, 25, 32

Yellow Area: Typically Shipped from SMC Stock

Note 3)

Marking is electroless nickel plated, provided as standard. (N specificaitons)

Speed Controller 800.695.3055

How to Order Speed Controller Standard Type (Metal Body)

Elbow Type

0 0-

Option Nil S K N*

Area code Nil N

USA (New numbering system) USA (Old numbering system)

None Sealant Hexagonal lock nut Electroless nickel plated

* AS1200, AS1400, and AS22 0 are electroless nickel plated as standard. (N specifications)

Body size 1 2 3 4

Port size

M3, M5 1/8, 1/4 3/8 1/2

U10/32 M3 M5 01 02 03 04

Type 2 4

Direct cylinder elbow type Direct cylinder flat elbow type

10-32UNF M3 x 0.5 M5 x 0.8 1/8 1/4 3/8 1/2

Port thread Control type 0 1*

Nil F N

Meter-out Meter-in

PT PF NPT

* Not available on AS1200-M3 and AS1400-M3.

In-line Type

000 -

Area code Nil N

USA (New numbering system) USA (Old numbering system)

Body size 1 2 3 4 5

M3, M5 1/8, 1/4 3/8 1/2 1/2

Port size Port thread Nil F N

PT PF NPT

Yellow Area: Typically Shipped from SMC Stock

M3 M5 01 02 03 04

M3 x 0.5 M5 x 0.8 (10-32 Nom.) 1/8 1/4 3/8 1/2

Speed Controller How to Order

800.695.3055

Speed Controller with indicator

--- Elbow Type/Universal Type

0 1F S

- N

02 - 07

S Option Nil S K N

Body size 1 2 3 4

M3, M5 (10-32 NOM) 1/8, 1/4 3/8 1/2

Applicable tube O. D. Metric 23 04 06 08 10 12

Type 2 3

None Sealant Hexaonal lock nut (Width across flat) Electroless nickel plated

Elbow type Universal type

Control type 0 1

Port size

Meter-out Meter-in

U10/32 M3 M5 01 02 03 04

With indicator Indicator direction

Port thread Nil F N

Nil

PT PF NPT

10-32UNF M3 x 0.5 M5 x 0.8 1/8 1/4 3/8 1/2

Inch 3.2mm 4mm 6mm 8mm 10mm 12mm

01 03 05 07 09 11 13

1/8” 5/32” 3/16” 1/4” 5/16” 3/8” 1/2”

Series

AN05 to 40

RoHS

How to Order

AN 20

02 Thread connection port size

Body size Symbol

Thread type

05 10 15 20 30 40

—

M thread R NPT

Symbol

Port size

Applicable model

M5 01 02 03 04

M5 x 0.8

AN05 AN10 AN15/20 AN30 AN40

1/8 1/4 3/8 1/2

Specifications Fluid

Compressed air

Max. operating pressure Note 1)

1.0 MPa

Noise reduction

30 dB(A) Note 2)

Ambient and fluid temperature

5 to 60°C Note 3)

Note 1) It indicates the inlet pressure for solenoid valve. Note 2) The value may vary, depending on the pneumatic circuit or pressure that is exhausted from the solenoid valve. Note 3) The product can be used in temperatures –10 to 60°C if there is no risk of water droplets forming and freezing.

Refer to page 5 for Precautions on these products.

Performance Model

Effective area mm2

Sonic conductance C [dm3/(s·bar)]

Recommended flow m3/min(ANR)

Weight g

AN05-M5 AN10-01 AN15-02 AN20-02 AN30-03 AN40-04

0.4 or less

0.5

0.8 or less

1.0 or less

2.5

3.0 or less

5.0 or less

5.5

8.0 or less

8.5

Note) Recommended flow rate is the flow at 0.5 MPa in the inlet pressure.

Construction/Parts/Dimensions AN05/10/20

AN15/30/40

No hexagonal part in AN05 and AN10

øB

Dimensions

øB

Model

Body (Resin) Hexagonal flats

D Port size

Sound absorbing material (Resin sintered body)

800.695.3055

Silencer Compact Resin Type/Male Thread

AN05-M5 AN10-01 AN15-02 AN20-02 AN30-03 AN40-04

(mm)

Port size R, NPT

M5 x 0.8

1/8

–

1/4

16.5

3/8

58.5

1/2

6.5

–

Silencer Compact Type

800.695.3055

Series AN Over 25 dB (A) noise reduction Space-saving compact type

How to Order

AN 403 Body size 103 203 303 403

04 Port size

Thread type Nil N

01 02 03 04

R NPT

1/8 1/4 3/8 1/2

Specifications Fluid Max. operating pressure (1) Noise reduction Ambient and fluid temperature

Compressed air 1.0 MPa 25 dB (A) 5 to 60°C (2)

Note 1) It indicates the inlet pressure for solenoid valve. Note 2) It can operate in temperature between –10 to 60°C if there is no risk of the moisture in the air freezing.

JIS Symbol

Refer to page 5-10-13 for Precautions on these products.

Flow Characteristics (Initial conditions) AN103 to 403

Model

AN103-01 AN203-02 AN303-03 AN403-04

0.5 Inlet pressure (MPa)

Model

0.2 0.1

Port size R 1 8 1 4 3 8 1 2

Recommended flow Effective (m3/min (ANR)) area (mm2) 0.8 or less 10 15 1.0 or less 35 2.0 or less 60 4.0 or less

Weight (g) 1 3 17 25

Dimensions (mm) A B D 23.5 11 — 36 16 14 66 22 19 84 25 22

Construction/Parts/Dimensions

0.05

AN103

AN203 Sound absorbing material (PE sintered body)

0.02 0.01

Element (PP sintered body)

0.005 50 100 200

500 1000

2000 Air flow (l /min (ANR))

5000 10000

Case Body Hexagonal flats

Noise Level (Initial conditions) AN103 to 403

Noise level (dB (A))

Condition: 0.5 MPa at inlet pressure of solenoid valve Measurement distance: 1 m

Port size Port size End plate

AN303/403

Without silencer With silencer

Sound absorbing material (PE sintered body)

130 120 110 100 90 80 70 60

Case Hexagonal flats

Port size

AN103-01 AN203-02 AN303-03 AN403-04

Yellow Area: Typically Shipped from SMC Stock

Note 1) About the display of product’s material PP: Polypropylene PE: Polyethylene POM: Polyacetal Note 2) Recommended flow rate is the flow at 0.5 MPa in the inlet pressure.

IN9001 A

127.5

REV

ECN

DESCRIPTION

DATE

APP

US91506-A

ADDED BOM AND NOTES

2/17/2011

MAM

DMP

US91506-B

REVISED NOTES

6/9/2011

MAM

SAH

PNEUMATIC DIAGRAM

8.5 MTG HOLES

16.5 16.5

VALVE SIDE

3 A

CYLINDER SIDE

5 2 4x 3/8 NPT (A, B PORTS)

16.5 16.5

7.5

2x 3 EXH PORTS FOR RESIDUAL PRESSURE

VV71-FPGR

4 3 2 1

CA00099 AXT500-13 90592A012 VV71-C01-DUO03615

PERFECT SPACER W/ RESIDUAL PRESSURE RELEASE VALVE M5x0.8x60 SHCS GASKET M5 HEX NUT ENDPLATE

ITEM NO

PART NUMBER

DESCRIPTION

UNITS

87 F

NOTES: (UNLESS OTHERWISE SPECIFIED) 1. ALL DIMENSIONS ARE FOR REFERENCE ONLY. 2. ALL DIMENSIONS ARE IN MILLIMETERS. 2

CHECKED

DATE

APPROVED

DATE

D. PHILLIPS

1/7/2011

CAD FILE

SIZE

QTY REMARKS

THIS DRAWING CONTAINS CONFIDENTIAL INFORMATION PROPRIETARY TO SMC CORPORATION OF AMERICA. IT MUST NOT BE REPRODUCED OR DISCLOSED TO OTHERS OR USED IN ANY OTHER WAY, IN PART OR IN WHOLE, EXCEPT AS AUTHORIZED IN WRITING BY SMC CORPORATION OF AMERICA.

DATE

12/15/2010

4 2 4 2

SMC Corporation of America

2:3

M. MCFALL

VV71-DUO03615

69 1

SCALE

DESCRIPTION

PERFECT SPACER W/ RESIDUAL PRESSURE RELEASE VALVE DRAWING/PART No.

SHEET 1 OF 1

VV71-DUO03615

REFERENCE NUMBER: US91506

REVISION

www.hhbarnum.com 800.695.3055

Balluff Cylinder Switches

BMF 235K-PS-C-2A-SA2-S4-00,3 Balluff Magnetic Prox, Rectangular Dia, N.O, DC PNP 10-36V, Flush, Micro QD 3 wire, 1.5 mm Range, Cylinder Switch Long, Plastic Housing, Plastic Face BMF 235K-PS-C-2A-SA2-S49-00,3 Balluff Magnetic Prox, Rectangular Dia, N.O., DC PNP 10-36V, Flush, Pigtail Pico 3-pin, 3 wire, 1.5 mm Range, Cylinder Switch Long, Plastic Face BMF 204K-PS-C-2A-SA2-S49-00,3 Balluff Cylinder Switch, C-3.8mm C-Slot Mounting, N.O., DC PNP 10-36V, Flush, Pigtail Pico 3-pin BMF 214K-PS-C-2A-SA2-S49-00,3 Balluff Cylinder Sensor, 2.9x16.8x4.5, N.O., PNP output, 4mm C-Slot, cable with Pico QD BMF 307-HW-86 Balluff bracket for tie rod mounting using BMF235K series BMF 307-HW-96 Balluff Mounting Bracket for round cylinder-use with BMF235 and band mount below SCHLAUCHSCHELLE BMF GR. 0 Balluff, Mounting Bracket, band mount, stainless steel, for a cylinder with 7-11mm bore SCHLAUCHSCHELLE BMF GR. 1 Balluff, Mounting Bracket, band mount, stainless steel, for a cylinder with 8...16mm bore SCHLAUCHSCHELLE BMF GR. 2 Balluff, Mounting Bracket, band mount, stainless steel, for a cylinder with 20-25 mm bore SCHLAUCHSCHELLE BMF GR. 3 Balluff, Mounting Bracket, band mount, stainless steel, for a cylinder - 28 -39mm diameter SCHLAUCHSCHELLE BMF GR. 4 Balluff, Mounting Bracket, band mount, stainless steel, for a cylinder with 40mm bore SCHLAUCHSCHELLE BMF GR. 5 Balluff, Mounting Bracket, band mount, stainless steel, for a cylinder with 50mm bore SCHLAUCHSCHELLE BMF GR. 6 Balluff, Mounting Bracket, band mount, stainless steel, for a cylinder with 63mm bore SCHLAUCHSCHELLE BMF GR. 7 Balluff, Mounting Bracket, band mount, stainless steel, for a cylinder with 80mm bore SCHLAUCHSCHELLE BMF GR. 8 Balluff, Mounting Bracket, band mount, stainless steel, for a cylinder larger than 80mm Bore 70

Balluff Cylinder Switches

www.hhbarnum.com 800.695.3055

BMF0005 BMF 204K-PS-2A-SA95-S4-00,3 Balluff Cylinder Switch, V Twin Series, C-Slot Mounting, N.O., DC PNP 10-36V, for 3.8mm C-Slot, M12 4-Pin BMF0006 BMF 204K-PS-C-2A-SA95-S75-00,3 Balluff Cylinder Switch, V-Twin Series, C-Slot Mounting, N.O., PNP, 10-36V for 3.8mm C-Slot, M8 4-Pin BMF00A4 BMF 214K-PS-C-2A-SA95-S4-00,3 Balluff Cylinder Switch, V Twin Series, C-Slot, N.O., PNP 10-30V for 4mm C- Slot SMC, M12 4-Pin BMF00A5 BMF 214K-PS-C-2A-SA95-S75-00,3 Balluff Cylinder Switch, V Twin Series, C-Slot, N.O., PNP 10-30V, for 4mm C-Slot SMC, M8 4-Pin BMF00C9 BMF 235K-PS-C-2A-SA95-S4-00,3 Balluff Cylinder Switch, V Twin Series, N.O., PNP 10-36V, for TSlots, M12 4-pin BMF00CA BMF 235-PS-C-2A-SA95-S75-00,3 Balluff Cylinder Switch, V Twin Series, N.O., PNP 10-36V, for TSlots, M8 4-pin

800.695.3055

Theoretical Cylinder Force The force exerted by a linear actuator can be calculated by using the following formula: Force = Pressure x Piston Surface Area

F=PxA

- and A = (cylinder diameter) 2 x .7854

Valve Sizing Find the Volume of the actuator: Volume = Piston Surface Area x Piston Stroke Find the Compression Ratio (CR): P I + 14.7 14.7 where P I represents the supply pressure to the valve Find the Standard Cubic Feet per Minute flow rate (SCFM): (cylinder volume, in 3) x (compression ratio) (time, in seconds, to fill volume) x (28.8) Note: this formula assumes that the application exists at sea level, 68째F, 36% relative humidity. Find the Coefficient of Velocity (Cv): SCFM x 1.024 Square root function

( Where

P x (P I + 14.7) P equals 10% of P I

5 72

Auto Switches 800.695.3055

Reed Switches: A thin metal contact is drawn closed by the magnetic field of the piston magnet. Since this is a a mechanical switch it will wear out over time and is suspecptible to vibration and shock. The advantage is that they are inexpesnsive and can be used with AC voltage. Solid State Switches: the magnetic field generated by the piston magnet causes a current flow inside the switch. Since there are no moving parts, the switch life is much longer than a reed switch and they are less prone to vibration and shock.They are more expensive, can only be used with DC voltages and you need to know whether you need a sinking or sourcing switch.

NPN 2 Wire Sensor Wiring

NPN 3 Wire Sensor Wiring

+24VDC Black

Sensor

Brown Load

Sensor

Blue

+24VDC Black Load

Blue -24VDC

-24VDC

PNP 3 Wire Sensor Wiring

PNP 2 Wire Sensor Wiring

+24VDC

+24VDC Brown

Brown Black

Sensor

Load

Black

Load

Blue

-24VDC

Three wire DC sensors include one wire that provides current to the sensor, an output signal wire and a ground wire. Most electro-mechanical loads (relays, counters, solenoids etc.) can use either a sink or source type switch provided it is wired properly.The proper sensor type must be chosen when used with solid-state loads and programmable controllers due to the fact that some of these loads must be grounded. Wire Colors: SMC has changed the wire colors on all of our switch products. This was done to conform to European standards that are being adopted worldwide.

Positive

Red

Negative

Black

Output

White

Brown (old colors)

Blue

(new colors)

Black

5 73

800.695.3055

Pipe Thread Quick Reference

Tapered pipe threads seal at the points where the crests of the threads meet the roots of the mating threads. Standard pipe threads , NPT, PT, and BSPt require sealant to prevent the development of a spiral leak path. NPTF threads are designed to crush the points of the crests into the roots of the mating threads to achieve the same purpose. however, use of a lubricant or sealant to prevent galling of the threads is preferred where not functionally prohibited. BSPt - British Standard Taper Pipe Threads PT - Japanese Industrial Standard Taper Pipe Threads {R (PT) - Taper external threads} {Rc (PT) - Taper internal threads} NPT - American National Standard Taper Pipe Threads * All of the above are designed to be used with sealant to provide a pressure tight joint. NPTF - American National Standard Dryseal Pipe Threads * Designed to provide a pressure tight joint without the use of sealant. PF - Japanese Industrial Standard Paralle Pipe Threads *Straight threads use a gasket or O-ring to produce a pressure tight joint. NPT and NPTF interchange, PT and BSPt interchange. Althought PT male will fit into an NPT female thread from 1/8" & Up, it is not recommended. No other interchanges are possible. Miniature threads, M5x0.8 and 10/32 UNF, will only mate as follows: 10/32 male will fit into an M5 female, M5 male will NOT fit into a 10/32 female. Both of these threads use a gasket to produce a pressure tight fit.

Basic Dimensions PT & BSPt Port Threads Major Thread Size Per In Pitch Dia. Form Angle 1/16 28 .03571 .304 55˚

NPT & NPTF Threads Major Thread Pitch Per In Dia. Form Angle 27 .030704 .313 60˚

1/8

.03571 .383

55˚

.030704 .404

60˚

1/4

.05262 .518

55˚

.05556

.540

60˚

3/8

.05262 .656

55˚

.05556

.675

60˚

1/2

.07142 .825

55˚

.07143

.840

60˚

3/4

.07142 1.041

55˚

.07143 1.050

60˚

* NE Ohio only

2/14

Controls for Factory Automation

hhbarnum.com H.H. Barnum Company 7915 Lochlin Drive, Brighton MI 48116 800.695.3055

ATC - timers and counters

Mencom - panel interface connectors, cable glands

Balluff - proximity, photoelectric and cylinder sensors, industrial RFID, remote power systems, linear position transducers, connectivity products

Mersen - fuses, fuse blocks, disconnects, power distribution blocks Metaphase - specialty vision lighting

Banner - photoelectric and vision sensors, safety light curtains, interlocks, cycle start buttons, controllers, EZ-lights, stacklights, LED lighting, wireless products

Murrplastik - flexible conduit, cable entry systems, cable drag chain, ACS plotter style labeling system

Brady - labeling and identification systems

NSK - ball screws, slides and linear actuators

Cablofil - cable tray

Nematron - industrial computers, HMIs, remote I/O

Carlo Gavazzi - SSRs and sensors

Niedax - cable tray, metal wire duct, ladder tray

Dalsa - industrial machine vision systems

Patlite - stacklights, horns, LED lighting

eWON - industrial VPN routers for remote access to machine networks

Pro-face - HMIs, operator interface with PLC Recognition Robotics - vision software and sensors that make complex solutions simple

Exlar - electric linear actuators, servo motors

Hirschmann - industrial Ethernet and networking products

Red Lion - data acquisition, data logging, message displays, panel meters, counters, HMIs, protocol converters, temperature controllers

Iboco - plastic wiring duct, cable ties

Rittal - enclosures and air conditioners

ICG - levelers, handles, knobs, wheels

RTD Company - RTDs, thermocouples, transmitters

Ilme - multi-pole rectangular connectors

Schmersal/Elan - safety interlocks and relays

Indusoft - automation and process control software

SMC - pneumatic valves, actuators, air preparation, fittings/tubing, vacuum products and grippers

+GF+ Signet - flow and analytical sensors

Jenatec - linear rails and carriages, ball screws, spindles, linear actuators

SoftNoze USA Inc. - sensor mounting and protection products

JVL - integrated servo motors, smart motors Kabelschlepp - cable and hose carriers

Swivel-Link - mounting hardware for vision cameras, lighting, sensors and more

Larco - safety mats

T-Slots - aluminum extrusion guarding and framing

Lenze/AC Tech - drives, servo controllers and motors

VIPA - IP20 I/O modules, profibus connectors with diagnostics

Lumberg - molded watertight connectors, distribution boxes, industrial networks, ethernet connectors

VSE - positive displacement flow meters Weidmuller - terminal blocks, power supplies, cable entry systems, ethernet products, circuit protection, wiring ferrules, wireless systems

Lutze - control cable, power supplies, cable fittings Magswitch - magnetic grippers and clamps

Michigan

Ohio

Indiana

Windsor, Canada

Value Added

Custom Air Preparation Panels

Control Panels

Manifold Assemblies

Vendor Managed Invenetory