horticultural products 2018–19 CATALOGUE
Table of Contents Propagation Supplies FlexiPlugs.......................................................1 Flexi Trays- Pre filled.........................................6 EllePot - PaperTec ..........................................8 EllePot Paper.................................................10 Horticubes...................................................12 InVitro express.............................................13 Rootcube wedge.........................................14 Plug Trays.....................................................15 Felt..............................................................18 Felt retail kits..............................................20
Propagation is the essence of the nursery industry for without this important 1st phase of all plant production, there would not be an industry. Whether from seed, cutting division or tissue culture, every plant has specific needs for this process to occur in an efficient manner. Some segments of the industry have been fortunate to be able to embrace mechanization, by way of Transplanter, mainly by way of plug production from seed derived species. Vegetative propagation, due to the variable nature of this process, has taken longer to move to Transplanter technology. This needn’t be the case, with improved propagation systems now available after being proven in Europe and America for many years.
Soiless media and substrates Coir...............................................................21 Perlite..........................................................23 Peat.............................................................24 Fertiliser......................................................25
Crop protection
PropTec™ was born from the experiences gained through the use of propagation systems in Highsun Express. Production processes were formed to bring those systems to the Australian market. PropTec™ specializes in the supply of propagation and substrate supplies and systems used in young plant production through to transplant stage.
Natural crop protection................................26 Index............................................................ 28 Terms and Conditions.................................. 29
Best Regards - The Proptec Team P 1300 137 584 E info@proptec.com.au
F 1800 644 015 www.proptec.com.au
Power your plants Disclaimer: Any information, advice, images, recommendations, assistance or service provided by Highsun Express is intended as a general guide only.
FlexiPlugs®
Stabilised Peat Plugs for the Professional Grower Grow-Tech Manufactures Stabilised Growing Media to Give Young Plants a Stronger Start. Grow-Tech’s Cellular Rooting Sponge® Technology. What makes Grow-Tech’s rooting sponge technology unique is the manufacturing process. Blending high quality peat and other organics with a hydrophilic foam binder. The result is a stabilised growing media that produces faster rooting for cuttings and seedlings by providing superior aeration and water retention. Commercial growers all over the world rely on Grow-Tech’s Flexi range of products to give their plants a stronger start. This optimal environment is a result of the FlexiPlug’s aeration and water retention capabilities. Our pH balanced plug also contains micronutrients and active biologicals so it has all the elements needed to promote healthy root growth and young plant vigour. FlexiPlugs are an ideal growing medium for traditional greenhouse and hydroponic growers. Plugs remain stable in hydroponic production and won’t clog filters.
To use 1. FlexiPlugs arrive pre-moistened, add water if needed. 2. Mist seed/water in cuttings. Plugs should be moist to the touch, not wet. 3. Watering requirements will change based on type of plant and the growing environment. Monitor as needed. FlexiPlugs have excellent water retention characteristics so be sure not to overwater. Before transplanting out of trays, dry plugs down for easy removal. Storage and handling instructions: store out of direct sunlight in a cool dry location.
Grower benefits • Earlier and easier transplanting • Faster rooting • Improved aeration • Custom formulations • pH balanced to 5.5-6.0 • Uniformity in the greenhouse • High water holding capacity • Even dry down • EC 0.6-1.0
1
FlexiPlugs®
Stabilised Peat Plugs for the Professional Grower DIBBLE
TRAY TYPE
PER CARTON/ CARTON PER PALLET
20mm x 40mm
4mm
209
Standard tray
5,000/32ctn
162
Standard tray
23mm x 50mm
4mm
162pt20
Root trainer
128
Standard tray Root trainer
PROPTEC CODE
SIZE
Gro-FP-2040-A4
225
Gro-FP-2350-A4
169
Gro-FP-2535-A4
25 x 35
25mm x 35mm
4mm
128pt 105J
Root trainer
Gro-FP-3565-A6
35 x 65
35mm x 65mm
6mm
105J
Root trainer
72pt25
Root trainer
72pt35
Root trainer
50T
Root trainer
72 & 50S
Standard tray
Gro-FP-3535-A7 Gro-FP-3545-A6
35 x 35 72B
35mm x 35mm 35mm x 45mm
7mm 6mm
Gro-FP-3545-C
CatEyePlug
35mm x 45mm
Open
50S & 72
Root trainer
Gro-FP-4044-Z
ZenPlug
40mm x 44mm
Split
50S
Root trainer
60C
Orchid tray
6mm
50SD
Root trainer
Split
32D
Root trainer
6mm
32D
Gro-FP-5075-A6 Gro-FP – 5050
2
PACKAGING
TRAY OPTIONS See Plug Trays page
GROW TECH CODE
72R
50mm x 75mm 52mm x 48mm
3,000/32ctn 3,500/32ctn 1,400/32ctn 1,700/32ctn 1,400/32ctn 750/32ctn 250/32ctn 500/ ctn32ctn
ZenPlug™
Stabilised Peat Plugs for the Professional Grower ZenPlug from Grow-tech for tissue culture. When transplanting delicate tissue cultures, protection of the roots and callus is critical. Balancing this with speed and efficiency can be tricky and stressful. With this in mind, Grow-Tech created the ZenPlug for tissue culture starts. An open plug shape allows for the precise and rapid placement of large callused plants such as orchids and trees in the centre of the plug. With a single hand motion, the ZenPlug easily folds around the fragile roots. The s-shaped interior holds the roots firmly but gently in place and gives young plants the optimal environment for root growth. Let the ZenPlug reduce the stress of planting your tissue culture production. When used in conjunction with clear plug trays, they are ideal for starting orchids. PACKAGING
PROPTEC CODE
GROW TECH CODE
SIZE
DIBBLE
TRAY OPTIONS
TRAY TYPE
PER CARTON/ CARTON PER PALLET
Gro-FP-4044-Z
ZenPlug
40mm x 44mm
Split
50S
Root trainer
750/32ctn
60C
Orchid tray
To use 1. ZenPlugs arrive pre-moistened, Add water if needed. 2. Lay tissue culture in centre of the plug. Gently close plug around plant and place in tray. 3. Mist as required. Plugs should be moist to the touch, not wet. 4. Watering requirements will change based on type of plant and the growing environment. Monitor as needed. ZenPlugs have excellent water retention characteristics so be sure not to over-water. Before transplanting out of trays, dry plugs down for easy removal. Storage and handling instructions: store out of direct sunlight in a cool dry location.
Grower benefits • Easier and faster planting of tissue culture plants • Shorter rooting period • Optimal aeration • pH balanced 5.5-6.0 • Even dry down
3
CatEyePlug
For Tissue Culture
The CatEyePlug for easy transplanting of tissue culture starts and pre-rooted cuttings. The “eye” of the plug allows for the precise and rapid placement of small and delicate plant material, such as tissue culture, micro cuttings and other hard to start plants.
Grower benefits • Easier and faster planting of tissue culture plants • Shorter rooting period
The plug’s unique eye-shaped dibble makes it possible to open the plug with one hand. Once squeezed, the CatEyePlug opens and creates the perfect spot for the placement of your young plant. When you let go of the plug, it closes and holds the tissue culture plant perfectly in position.
• Optimal aeration • pH balanced • Even dry down
4
PACKAGING
PROPTEC CODE
GROW TECH CODE
SIZE
DIBBLE
TRAY OPTIONS
TRAY TYPE
PER CARTON/ CARTON PER PALLET
Gro-FP-3545-C
CatEyePlug
35mm x 45mm
Open
50S & 72
Root trainer
1400/32
FlexiPlugs®
Stabilised Peat Plugs for the Professional Grower IMAGE
PROPTEC CODE FLEXIPLUGS
SIZE
DIBBLE
PACKAGING CARTON/PALLET
FlexiPlug20mmx40mm4m
20mm x 40mm
4mm
5,000/32ctn
FlexiPlug23mmx50mm4m
23mm x 50mm
4mm
3,000/32ctn
FlexiPlug25mmx35mm4m
25mm x 35mm
4mm
3,500/32ctn
FlexiPlug35mmx65mm6m
35mm x 65mm
6mm
1,400/32ctn
FlexiPlug35mmx35mm7m
35mm x 35mm
7mm
1,700/32ctn
FlexiPlug35mmx45mm6m
35mm x 45mm
6mm
1,400/32ctn
FlexiPlug35mmx45mmCatEye
35mm x 45mm
Open
1,400/32ctn
FlexiPlug40mmx44mmZen
40mm x 44mm
Split
750/32ctn
FlexiPlug50mmx75mm6m
50mm x 75mm
6mm
250/32ctn
Split
FlexiPlug50mmx50mm6mm
50mm x 48mm
6mm
500/32ctn
5
Pre Filled - FlexiTray®
The Optimal Growing Environment for Cuttings and Seeds FlexiTrays consist of stabilised plugs made of peat, other organics and a foam binder. The plugs’ consistent moisture control and high aeration reduce rooting times which means a faster crop turnaround for you. This ready-to-use system increases the efficiency of your greenhouse by allowing for earlier transplanting, better crop timing and full automation. Commercial greenhouse growers trust Flexitrays for rooting cuttings and seed germination. The production process we use can fill most North American and European configurations. We will also work with you to develop a custom formula to meet the needs of specialty crops. FlexiTrays can be dribbled to foster the optimal environment for seed germination or to allow for maximum stem to soil contact for un-rooted cuttings. The growing medium remains stable in hydroponic production and won’t clog filters.
6
Grower benefits • Earlier & easier transplanting • Faster rooting • Improved aeration • Custom formulations • PH Balanced 5.5-6 • Uniformity in the greenhouse • Higher water holding capacity • Even dry down
Pre Filled - FlexiTray®
The Optimal Growing Environment for Cuttings and Seeds PROPTEC CODE
COUNT CELL TYPE
WIDTH LENGTH CELL SIZE
VOLUME
FlexiTray 288
288
Square
28cm
53cm
20mmx25mm
6 cu cm
FlexiTray 128
128
Square
28cm
53cm
30mmx50mm
FlexiTray 105
105
Square
28cm
53cm
FlexiTray 105H
105
Hex
28cm
53cm
DIBBLE
PACKAGING PALLET
CARTON
Seed
304
20
23 cu cm
6mm
240
10
34mmx50mm
29 cu cm
4mm
240
10
32mmx38mm
23 cu cm
4mm
304
12
7
Ellepot - Papertec
The eco-friendly growing system
Grower benefits • Faster and healthier root development • Higher yield per plant • Faster transplanting and handling • All natural paper and fully sustainable solution
The Ellepot The Ellepot is made of all natural eco friendly & fully degradable paper filled with your choice of growing media. The Ellepot System is a unique propagation system suitable for propagation of cuttings and seeds for young plants, potted plants, cut flowers, nursery stock, forest plants, and vegetables A unique propagation method
Freight • Prices are FOB Ormiston QLD • PropTec can ship to any Australian destination • Allow 3-4 weeks for delivery depending on season • Shipped on pallets or cartons
8
Storage
Ellepot is an eco-friendly growing system, which helps to grow larger and healthier roots, creating highquality plants and eliminating the need for plastic. Ellepots are root, air, and water permeable and made from all natural and environmental friendly paper which degrades naturally and will not harm the environment. This ensures natural and fast root development resulting in the highest quality plants. Finally, the Ellepot system helps reducing logistics and labour costs through easier and faster transplanting, eliminates transplant shock, and increases plant quality, health and structure.
• Ellepots are made to order and need to be used soon after their arrive • Storage is not recommended beyond 8 weeks • Certain conditions may warrant shorter or longer storage times
Mixes Standard: Peat, Perlite-30%, Starter charge, Wetting Agent and TRI-D25. High Porosity: Peat, Perlite- 60%, Starter charge, Wetting Agent and TRI-D25. TRI-D25 is a biological inoculum of beneficial bacteria. This additive is optional and can be omitted. Without TRI-D25 – reduce the price by 2% An MSDS is available on request. PH ranges: 5.4- 6.0 EC ranges: 0.5-1.0 *We recommend you always test PH & EC prior to sticking and monitor as crop progresses. *All Purchase Orders must specify which Mix and Paper are to be used in your order. Note: Degradability is dependent on growing and is not guaranteed. Fungicide coating does not eliminate mould risk. Peat moulds are naturally occurring in any peat mix.
Ellepot - Papertec
The eco-friendly growing system SIZES
CUBIC cm
TRAY OPTIONS See Plug trays page for Tray Species
TRAY TYPE
PACKAGING TRAYS/ELLEPOTS PALLET
CARTON
20mm x 30mm
9.42 cu cm
209
Standard tray
400/83,600
16/3,344
25mm x 35mm
17.17 cu cm
2x51
Root trainer
360/36,720
12/1,224
105J
Root trainer
320/33,600
12/1,260
128pt
Root trainer
360/46,080
12/1,536
25mm x 45mm
22.08 cu cm
105
Standard tray
320/33,600
12/1,260
30mm x 40mm
28.27 cu cm
2x36
Root trainer
360/25,920
11/792
30mm x 45mm
31.81 cu cm
72
Standard tray
320/23,040
12/864
45mm x 45mm
1.53 cu cm
50
Standard tray
320/16,000
12/600
*Larger sized Ellepot-PaperTec trays are available on request.
9
Ellepot - Paper
The eco-friendly growing system From raw material to ellepot propagation paper EllePot purchase all raw materials from selected partners and suppliers under long-term and exclusive contracts based on the special features that give our products their special required characteristics. All raw materials being used are all natural, environmental friendly and fully degradable. The fine wood fibres used in the Ellepot papers are sourced from responsibly harvested FSC-certified forests. For our assortment for Ellepot Membranes’ the fibres come from 100% bio-based and renewable resources, and are certified 100% Biodegradable according to the international standards.
Paper Supply • Prices are FOB Ormiston QLD • We stock four shown below
10
• Allow 1-2 weeks for delivery depending on season • Packed in cartons
VEGE SHORT
LANDSCAPE
Our fastest degrading paper at 1-2 months Black, same perforations as landscape
Standard paper for all sizes 3-5 month degradability Treated with fungicide to reduce mould risk Brown
UNIVERSAL
EP
For longer crops on the bench More perforations than Landscape 6-9 months degradability Brown
Most perforated paper 12-24 month degradability White
Ellepot
A wide assortment A paper for every crop We are proud to offer more than 14 different types of specially developed Ellepot papers for forestry, flowers, landscape, vegetables, fruit and nuts. All types developed with features that give our products their special characteristics and meet the requirements of our customers. We are confident that we can provide the product you need - whether this is for perfect root development or ensuring that the paper decomposes and disappears especially in connection with plant out or that the product applies to special environmental industry standards.
IMAGE
CODE
NAMES
DECOMPOSE
COLOUR
FUNGICIDE
COMPOSITION
STOCK
SAMPLES
Vege Short
1-2 Mths
Black
No
Wood, Poly Rio
Yes
Yes
Organic
1-2 Mths
White
Yes
Wood, Poly Rio
No
Yes
Landscape
3-5 Mths
Brown
Yes
Wood, Poly Rio
Yes
Yes
AP
4-6 Mths
Brown
Yes
Wood, Poly Rio
No
Yes
Universal
6-9 Mths
Brown
No
Wood, Poly Rio
Yes
Yes
Yes
EP
Fruit, Forestry
12-24 Mths
White
No
Wood, Poly Rio
Yes
VP
Fruit 12+, Forestry 12+
12-24 Mths
Brown
No
Wood, Poly Rio
No
12-24 Mths
Brown
Yes
Wood, Viscose, Poly Rio
No
Yes
12-24 Mths
White
No
PLA (6 mth indust No compost)
Yes
Never
White
No
Synthetic
FP
Hydroponic
Membrane
Membrane Bio
No
11
Oasis Horticubes
Oasis Grower Solutions Foam Medium Engineered media for increased rooting success. Horticubes growing medium is an engineered hydroponic foam specifically designed for optimal callus and rapid root development. This cutting propagation medium was designed specifically with the perfect balance of air and water to encourage plant growth and get unrooted cuttings off to a strong start. With a low cation exchange capacity Horticubes allows for rapid nutrient availability without danger of salt accumulation. It is pathogen free, providing an environment which helps reduce disease and insect problems. Horticubes growing medium is manufactured in sheet form, with individual cells shaped like cubes. Perfect for a wide variety of crop, Horticubes media is available in sheets of various configurations that fit conveniently into the Horticube carrier tray. Best for crops: Unrooted cuttings such as poinsettias, geraniums, hibiscus, New Guinea impatiens, fuchsia, foliage, perennials and woody ornamentals.
12
PROPTEC CODE
OASIS #
DESCRIPTION
CONFIGURATION
UNITS/CTN
Oas-HC-25162
5225
Horticube 25mm
162 units per sheet - 20 sheets per ctn
3240
Oas-HC-25276
5231
Horticube 20mm
276 units per sheet - 20 sheets per ctn
5520
Oas-HC-32104
5440
Horticube 32mm
104 units per sheet - 20 sheets per ctn
2080
Oas-HC-4050
5245
Horticube 40mm
50 units per sheet - 20 sheets per ctn
1000
Oas-HC-tray
BM8055
Horticube Carrier Tray
Grower benefits • Ready to use in numerous configurations right out of the box • The consistency of the media creates more uniform rooting success • Provides ideal air to water ratio • Superior cutting hydration: Less need for misting simplifies growing process • Low Cation exchange properties: Improves the speed, precision and availability of nutrients • Sterile media arrives pathogen-free, to help reduce disease and insect problems • Roots remain undisturbed during transplant, eliminating plant shock • Easy to separate cubes
100
Oasis InVitro Express Foam medium tissue Culture
Breakthrough technology from OASIS® Grower Solutions can replace agar with cellular foam and allow plantlets to root in liquid medium while maintaining optimal aeration. Grower Solutions Foam Medium Tissue Culture medium for Invitro root development, rapid handling at transplant, and faster greenhouse growth. Best for (crops): tissue culture
Grower benefits • Cellular foam, and is free of biotic pests and autoclavable • Both liquid culture or semi-solid culture. The foam matrix is inert and does not bind water or nutrients • With liquid culture, water and nutrients are readily available and can promote superior plantlet growth • Star dibble hole design allows for easy insertion • Ideal air to water ratio for optimal rooting success
Rigid Vessel Highly purified polycarbonate, which offers excellent light transmission Autoclavable and reusable Adjustable vent (0-1.06 cm2) with a PTFE filter membrane (pore size: 0.2μm) Stackable base and lid Rectangular construction for 25% more growth area Dimensions: 10.8 cm L x 9 cm W x 9.9 cm H
• The specialized media density and strength allow development of strong and vigourous root system • Sugar containing media in the foam rinses off quickly • Microplants are separated with roots protected and intact in the foam cubes • Minimal root damage at transplant • Rigid vessels available
Why OASIS® InVitro Express is the right choice The OASIS® cellular foam creates an ideal environment for uniform rooting and protects roots through transplanting. The culture medium can be held in a liquid state or semi-solid state. Prior to transplant, the media is easily rinsed away without damaging the young roots. When ready for transplant, the cubes are separated with roots and foam intact, simplifying the transplanting process and increasing success rates in the greenhouse.
PROPTEC CODE
OASIS #
DESCRIPTION
CONFIGURATION
UNITS/CTN
Ive35CT
87-70350
35 cell sheet
7.62cm x 11.43cm x 2.54cm 750
750 sheets / 26,250 units/ctn
13
Oasis Rootcube Wedge
Propagation of challenging and hard-toroot crops.
Grower benefits • Sterile media arrives pathogen-free to help reduce disease and insects • Ready to use media: available in many shapes and configurations for maximum flexibility • Engineered media designed with the ideal air to water holding ratio for uniform and consistent rooting • “Universal” star dibble holes make sticking cuttings fast and easy • Superior cutting hydration reduces the need for excessive misting • Low cation exchange capacity for rapid nutrient availability
14
• Easy to hydrate and allows for simple water management during the course of propagation
Rootcubes® Wedge® is an engineered foam medium with a distinctive design that tapers in shape from top to bottom, for cutting propagation. Along with optimal air to water ratios for fast, uniform rooting, this unique shape aids in directing roots downward for a more rapid development, resulting in greater crop turnover and overall productivity for the grower. Each cell is singulated, therefore, there is no tangling of the fibrous root systems. Best for (crops): poinsettias, mandevilla, hibiscus, roses, clematis, and other woody ornamentals. Wedge propagation – vegetative The special shape of Oasis Wedge growing medium encourages roots to grow downward to develop stronger and faster. Because more developed roots lead to healthier, more productive roots. Wedges give you more flexibility at the growing bench.
• Early and rapid transplant with minimal shock to the young plant
PROPTEC CODE
OASIS #
DESCRIPTION
CONFIGURATION
UNITS/CTN
Oas-WE-102-med
5615
Wedge medium only for 102
17 units/strip 120 strips/ctn
2040
Oas-WE-102-tray
5641
Wedge tray only
102 units/tray 40 trays/ctn
4080
Oas-WE-13-tray
5600
Wedge 13 Carrier tray
75 trays/ctn
75
Oas-WE-13-strip
5656
Wedge 13 Strip
13 units/strip 280strips/ctn
3640
Horticulture Plug Trays Growing trays
Supplier of plastic horticulture growing trays for propagation on in varied cell sizes, depth, volume. Semi-rigid plug trays allow you to easily separate Species, in one tray, easing transplanting. Huge Range of Specialty Trays in various tray sizes. Use: Flowers, vegetable, herbs, landscape and many other more. Horticulture Plug tray benefits Growing a plant as a plug helps to strengthen its root system while encouraging faster plant development when transplanted into the final container. IMAGE
CODE
COUNT CELL TYPE
Each cell size has its own unique advantages. Smaller cell sizes offer several benefits, including helping to strengthen a weaker root system, while maximising space in your greenhouse area. The larger cell size allows the plug to remain in the tray longer before transplanting, allowing the plant to retain both moisture level and nutrients longer. Before choosing that final cell size, consider your production schedule, the species-growing pattern, including root development and the available propagation space.
WIDTH LENGTH CELL SIZE
VOLUME
PACKAGING* PALLET
CARTON
512C
512
Square
28cm
53cm
13mmx21mm
3 cu cm
1760
100
288XCE
288
Square
28cm
53cm
20mmx25mm
6 cu cm
2880
80
288A
288
Star Deep
28cm
53cm
20mmx50mm
9.4 cu cm
1440 1600
90 Loose packed on pallet
209
209
Square
28cm
53cm
22mmx32mm
14 cu cm
1600
100
200A
200
Star Deep
28cm
53cm
21mmx55mm
20 cu cm
1280 1440
80 Loose packed on pallet
162
162
Square
28cm
53cm
26mmx45mm
17 cu cm
3600
100
162PT20
162
Ellepot
28cm
53cm
28mmx43mm
20 cu cm
1280
80
128
128
Square
28cm
53cm
30mmx50mm
23 cu cm
3600
100
*Subject to supplier packaging changes
15
Horticulture Plug Trays
Growing trays IMAGE
CODE
COUNT CELL TYPE
WIDTH LENGTH CELL SIZE
VOLUME
PACKAGING* PALLET
CARTON
128PT
128
Ellepot
28cm
53cm
30mmx43mm
24 cu cm
1600
100
105PT
105
Square
28cm
53cm
34mmx50mm
29 cu cm
3600
100
105J
105
Ellepot
28cm
53cm
32mmx38mm
23 cu cm
1600 1760
100 Loose packed on pallet
2x51
102
Ellepot
28cm
53cm
32mmx38mm
23 cu cm
1440
90
2x36
72
Ellepot
28cm
53cm
35mmx40mm
35 cu cm
1440
90
72
72
Square
28cm
53cm
40mmx50mm
39 cu cm
3600
100
72PT25
72
Ellepot
28cm
53cm
38mmx40mm
35 cu cm
1600
100
72PT35
72
Ellepot
28cm
53cm
42mmx40mm
50 cu cm
1600
100
50
50
Square
28cm
53cm
47mmx50mm
61 cu cm
3600
100
60C
60
Clear Orchid
31cm
53cm
47mmx70mm
90 cu cm
1600
TBA
50S
50
Ellepot
28cm
53cm
40mmx45mm
50 cu cm
1600
100
16
*Subject to supplier packaging changes
Horticulture Plug Trays Growing trays IMAGE
CODE
COUNT CELL TYPE
WIDTH LENGTH CELL SIZE
VOLUME
PACKAGING* PALLET
CARTON
50SD
50
Star Deep
28cm
53cm
40mmx60mm
70 cu cm
1440
90
50T
50
Ellepot
28cm
53cm
48mmx40mm
46 cu cm
1600 1800
100 Loose packed on pallet
50SQ
50
Square
28cm
53cm
50mmx55mm
96 cu cm
1600
100
32D
32
Ellepot
28cm
53cm
60mmx60mm
1600
100
*Subject to supplier packaging changes
17
BioStrate
A Microgreen Propagation Felt
Grower benefits • Holds the optimal amount of water • Ready to plant, no pretreatment required • Custom widths available • Lightweight • Easy to use • Roots are stabilised • pH balanced
This lightweight biobased textile is designed for the hydroponic production of microgreens, salad greens and wheatgrass. BioStrate absorbs and retains water while providing an optimal environment for dense healthy root development. Our blend of biopolymers and natural fibers is designed to manage water efficiently for optimal growth in a variety of hydroponic systems. BioStrate 185gsm is certified compostable*. However, it will maintain its structural integrity for the entire crop cycle and won’t clog filters. Custom widths and pre-cut shapes are available. BioStrate® Technical Data Sheet Description: BioStrate is a biobased non-woven felt made from a biopolymer and natural fiber blend.
To use
18
1. Moisten BioStrate® Felt with mist or a quick dip in a water bath. Let excess water drain. 2. Sprinkle seeds to the desired density, then mist. BioStrate can support tightly packed seedlings. 3. Place in germinating area for 48 hours or as needed.
Application: BioStrate is a growing medium designed for hydroponic microgreen, salad greens and wheatgrass production. Physical Properties: Weight: 185 gsm | Thickness: .14” (4mm) Weight: 300 gsm | Thickness: .4” (10mm) *This product meets ASTMD 6400 and is intended for commercial composting. Not suitable for backyard composting.
4. BioStrate performs best when not overwatered. The amount of water will vary depending on the system used. The felt should be kept moist, not saturated. Water level should not be higher than the top of the medium. If water pools in the felt, reduce water flow.
PROPTEC CODE
DESCRIPTION
UNITS/CTN
UNITS/PALLET
THICKNESS
Gro-BS-22.5-185
BioStrate 22.5cm x 36m roll 185gsm
4
72
4mm
Gro-BS-22.5-300
BioStrate 22.5cm x 36m roll 300gsm
4
72
10mm
Gro-BS-91.5-185
BioStrate 91.5cm x 36m roll 185gsm
1
18
4mm
Gro-BS-91.5-300
BioStrate 91.5cm x 36m roll 300gsm
1
18
10mm
Gro-BS-23x49-185
BioStrate 23cm x 49cm sheet 185gsm
240
4800
4mm
Gro-BS-23x49-300
BioStrate 23cm x 49cm sheet 300gsm
200
4000
10mm
PUREGrown™
Hemp-felt, a growing medium for greens PUREgrown™ hemp-felt is designed for the production of micro-greens, salad greens and wheatgrass.
Grower benefits • Made from natural fibers
This OMRI listed 100% hemp product is made from fibers grown without the use of pesticides, herbicides or synthetic fertilisers. PUREgrown hemp-felt is designed to transport water evenly throughout the entire medium and maintain a perfect ratio of water and air for the development of healthy root systems. Consistent growing conditions allow for consistent production of young plants.
• Ready to plant, no pre-treatment required • Lightweight • Easy to use • OMRI listed • Holds the optimal amount of water & air
Benefits for the Environment:
• Roots are stabilised
Made from hemp grown without the use of pesticides, herbicides or synthetic fertilisers.
To use
PUREgrown standard sizes:
1. Moisten PureGrown Felt with mist or a quick dip in a water bath. Let excess water drain.
• 450gsm, 3.5mm thick for micro-greens and wheatgrass • 750gsm mat, 5mm thick for micro-greens and wheatgrass
2. Sprinkle seeds to the desired density, then mist. PureGrown can support tightly packed seedlings.
• 1300gsm mat, 10mm thick for micro-greens and baby greens
3. Place in germinating area for 48 hours or as needed.
• Custom sizes available in all densities
4. PUREgrown hemp felt performs best when not overwatered. The amount of water will vary depending on the system used. The felt should be kept moist, not saturated. Water level should not be higher than the top of the medium. If water pools in the felt, reduce water flow.
PROPTEC CODE
DESCRIPTION
UNITS/CTN
UNITS/PALLET
THICKNESS
Gro-PG-23x49-450
PureGrown 23cm x 49cm sheet 450gsm
200
3200
450gsm
Gro-PG-23x49-750
PureGrown 23cm x 49cm sheet 750gsm
180
2880
750gsm
Gro-PG-23x49-1300
PureGrown 23cm x 49cm sheet 1300gsm
140
2240
1300gsm
Gro-PG-22.5-450
PureGrown 22.5cm x 43m roll 450gsm
4
72
450gsm
Gro-PG-22.5-750
PureGrown 22.5cm x 55m roll 750gsm
4
32
750gsm
Gro-PG-91.5-450
PureGrown 91.5cm x 43m roll 450gsm
1
18
450gsm
19
PUREGrown™
Retail kits PUREgrown is designed for microgreen, leafy green and wheatgrass production. This OMRI Listed 100% hemp product is made from fibers grown without the use of pesticides, herbicides or synthetic fertilisers. PUREgrown hemp-felt is designed to transport water evenly throughout the entire medium and maintain a perfect ratio of water and air for the development of healthy root systems. Consistent growing conditions allow for consistent production of young plants.
• Holds the optimal amount of water & air • Roots are supported
Grower benefits • OMRI Listed
Directions for Use
• Made from natural fibers
Moisten PUREgrown hemp-felt with mist or a quick dip in a water bath. Let excess water drain.
• Ready to plant, no pre-treatment required
Sprinkle seeds to the desired density, then mist. PUREgrown can support tightly packed seedlings.
• Lightweight
Place in germinating area for 48 hours or as needed.
20
Benefits for Plants:
PUREgrown performs best when not overwatered. The amount of water will vary depending on the system used. The felt should be kept moist, not saturated. Water level should not be higher than the top of the medium. If water pools in the felt, reduce flow.
• Easy to use • Benefits for the Environment: • Made from hemp grown without the use of pesticides, herbicides or synthetic fertilisers
PROPTEC CODE
DESCRIPTION
PER CARTON
PER PALLET
THICKNESS
Gro-PGR-23x49-750
PureGrown Retail Pack 750gsm - 6 sheets per pack
20 Packs
20 cartons
750 GSM
Gro-PGR-23x49-Kit
PureGrown Retail Complete Kit - 6 sheets per pack, 2 reservoir trays, 1 clear dome
12 Kits
20 cartons
750 GSM
Coir Blocks Jiffy Coco Products
Coco substrate has a variety of uses, depending on the way the coconut husk is processed. Divided into forms: Husk Chips (HC), Coco Pith (CP) and Crush. Husk chips are produced by cutting fresh green husk into sleeves and chipped afterwards. Coco pith is fine material combed off the coconut fibres. Crush is the whole husk ground to form a combination of chip and pith. Products and RHP After treatment that includes ongoing washing and buffering the raw material gains RHP certification that is necessary for it to be considered for use in Holland. It is free of weed seed and is monitored throughout the entire process. EC is typically < 0.05mms 1:15 dilution. Unbuffered Coir Some coir products can be washed but unbuffered which can result in the release of Na and K from the coir at a later stage in your production. This has EC raising effect in your potting mix and can be problematic for salt sensitive crops.
Unwashed Coir Coir is available in an unwashed and unbuffered form with only the aging process being carried out to ensure the correct physical characteristics. This coir is best used only if it is mixed into potting mixed at relatively low percentages. EC is typically > 2-3mms at 1:1.5 dilution.
TYPE
VOLUME
TREATMENT
THICKNESS
RHP 10mm Husk Chip
55-60L (5kg)
Washed and buffered
<0.5
OMRI 10mm Husk Chip
55-60L (4.5kg)
Washed
<1.5
OMRI 10mm Husk Chip
55-60L (4.5kg)
RHP Coco Pith
60-65L (5kg)
Washed and buffered
<0.5
OMRI Coco Pith
60-65L (5kg)
Washed
<1.5
RHP 60% Pith 40% Chip
60-65L (5kg)
Washed and buffered
<0.5
*Special orders only - not in stock Unwashed
<2-3
*Special orders only - not in stock
*EC measurements taken using 1:1.5 Dilution
NAME
PROPTEC CODE
UNITS/CTN
UNITS/PALLET
Coir Block
CB-100c-RHP
5kg block 100% chip-RHP
224
Coir Block
CB-100p-RHP
5kg block 100% pith < 8mm- RHP
220
Coir Block
CB-100p-OMRI
5kg block 100% pith -OMRI
220
Coir Block
CB-40p60c-RHP
5kg block 40% pth 60% ch-RHP
224
Coir Block
CB-60p40c-RHP
5kg block 60% pth 40% ch-RHP
224
21
Coir Discs
Jiffy Coco Products Jiffy offers the Hydroponic industry a line of products that is geared towards changing the industry into sustainable vegetable growing.
Gerbera can be grown in 100% coir, or mixes of coir and perlite. The Jiffy CD will, just like all coarse coir, contain about 75% water and 25% air.
Jiffy CD
As coir substrates can vary widely in quality due to the need of proper treatment of the media, Jiffy guarantees the quality of the Jiffy CD to confirm to the need of the horticultural industry.
The Jiffy Coir Disc is specially designed for the cultivation of Gerbera, providing maximum structure stability and an optimal air/water ratio. The Jiffy treated media guarantees against high Na and K values, avoids excessive conductivity while at the same time having Ca and Mg readily available through the fertiliser added to the substrate.
22
This means that Sodium (Na), Potassium (k) and Chloride (Cl) levels are as low as possible to avoid problems related to Calcium (Ca), Magnesium (Mg) and other useful fertiliser components binding to the media.
The disc concept is to utilize the maximum fibre content in the substrate to obtain the maximum structure stability and optimal air/ water ratio. The handling volume is reduced making for easy handling of the material and lower transportation costs. By using the Jiffy CD, no extra pot filling equipment is required and no bulky substrate needs to be handled.
PROPTEC CODE
ITEM NUMBER
PALLET QUANTITY
MIN QTY PER CARTON
CDG-160-ctn
JiffyCoirDiscOz160mm
1680
40
Jif-CDG-135-3.3L
Jiffy Coir Disc Euro 135mm
2688
56
Coir Disc Orchid 105mm
Jif-CDO-105
5670
135
Jiffy Coir Disc Orchid 80mm
Jif-CDO-80
12 768
304
Perlite
Horticultural perlite
PropTec Horticultural
PERLITE
Producing Process
Grower benefits GRADE MEDIUM
Perlite is 100% natural siliceous volcanic mineral (amorphous volcanic glass), formed by the sudden cooling and solidification of volcanic ash, which traps crystalline water into its mass.
• Improves aeration & drainage(2-4MM)
• Makes moisture & nutrients readily available to plants
100 Litre
Expanded perlite is a lightweight soil conditioner, loosens clay soil, reduces caking, improves drainage and aeration. Blend peat moss and perlite for custom soilless mix. Can be used to start seeds, propagate cuttings and store bulbs.
Approx. Volume
• Is inorganic & doesn’t deteriorate
HIGHSUN EXPRESS • Has essentially neutral PH of 6.5 to 128 DUNDAS ST WEST ORMISTON 4160 7.5 Ph: 07 3821 8555 Web: www.highsun.com.au
• Serves as an insulator to reduce extreme soil temperature fluctuations • Sterile and free of weeds & diseases • Clean, odourless, lightweight and safe to handle. • Non-toxic, flavourless etc.
23
1-3mm
2-4mm PROPTEC CODE
GRADE
SIZE
BAG/VOLUME
RP Perlite 500
500 Fine
1- 3mm
100L/bag
RP Perlite 400
P400 Medium
2- 4mm
100L/bag
Peat
Power your plants
Baltic Peat
Baltic peat is widely known for its physical, biological, and chemical properties. The climate and geological conditions in these latitudes foster the development of the valuable properties of peat. The most important component of soil is organic substances, which make up the structure of soil and are an essential growth stimulant. Peat ensures high moisture absorbability, air circulation around the plant roots, and low heat conductivity, thus creating optimum conditions for cultivating plants and stimulating development of the root system. Baltic peat ensures the best possible environment for plant development and the formation of a root system.
Substrate Peat Block peat Pre formulated substrates - 250 litre bags Pre formulated Terracult substrates are produced in modern mixing facilities where the peatâ&#x20AC;&#x2122;s texture is maintained. Besides the large selection of various peats (block peat, milled peat, structure and level of decomposition), Terracult also offers many aggregates such as clay granulate, perlite, fertilisers, such as micronutrient fertiliser and patterned release fertiliser, and other materials. * Order Lead time 4-5 months. Container or pallet orders.
You can use the peat that we offer as a raw material for producing substrates, as well as to improve the soil in horticulture and agriculture.
24
Raw Peat White Block Peat - 300 litre bags Standard peat: 0-10 - texture peat The fine texture ensures a very high level of water retention, which protects the plants from drying out. It is often used as soil to foster sprouting (frequently for automatic sowing lines). Suitable for the reproduction of seed vegetables, trees, decorative plants, as well as for improving other types of soil. Coarse fraction peat: 10-30mm Coarse texture peat This peat is intended for perennial potted plants (trees and shrubs), because they ensure high air capacity. Coarse fraction peat ensures air exchange and drainage of the same level as that which can be achieved with the presence of perlite and vermiculite. Fine
Medium
Course
PROPTEC CODE
DESCRIPTION
GRADE
VOLUME/BALE
BALES/PALLET
Peat-10-300L
Peat 0-10 mm - 300L
0 - 10mm
300 litres
18
Peat-10-30-300L
Peat 10-30mm bale - 300L
10 - 30mm
300 litres
18
TC10-250L
Substrate TC10 - fine0-10+perl
0 - 10mm + 10% Perlite
250 litres
18
TC5-250L
Substrate TC5 - med 0-20mm
0 - 20mm
250 litres
18
Oriand
Liquid organic fertiliser Oriand is an organic leaf fertiliser based on several plant extracts. It contains several nutrients that are needed for a more balanced and healthy growth of the crop. Oriand ensures faster and better absorption of nutrients, and thereby increases the natural resistance of the plant. This increases especially the resistance to insects and pests (with regular use). For the best results of Oriand, it is important that the treatment is repeated at regular intervals. Only then all the leaves are actually covered. Due to the growth of the crop, it is necessary to repeat the treatment every week. During periods of rapid growth, it is necessary to spray Oriand every five days.
Dosage 1 litre per 1000 m2. Repeat every 5 â&#x20AC;&#x201C; 7 days. In times of rapid growth: repeat every 5 days. * Always apply a test spray in sensitive crops. Storage Oriand can be kept for two months after opening, providing the bottle is securely closed and stored in a cool, dark place.
Application When using Oriand, ensure good leaf coverage. Oriand can be applied with all the usual spraying techniques. The most reliable result is obtained by beginning early in the spring and continuing so that the crop is clean at the end of the season.
25
NAME
PROPTEC CODE
DESCRIPTION
VOLUME
Oriand
Der-ORI-10L
Deruned Oriand 10 litre
10 litre
Alsa
Natural crop protection Application
Alsa repels thrips and other insects and makes insect control more effective. Alsa is a natural crop protection product based on the odour and taste compounds derived from garlic. These compounds, which can be effective in influencing the behaviour of harmful insects such as thrips, are present in garlic where they are dissolved in oil. DeruNed has succeeded in extracting these oil-soluble odour and taste compounds from garlic using a special process. This has resulted in Alsa: a unique liquid product that can be effectively used for the control of thrips and other insects.
26
Alsa increases the effect of chemical and biological control. When Alsa is applied the odour and taste of the plant change in such a way that the insects no longer find the plant attractive. The insects become restless and leave their hiding places. Chemicals and natural enemies can now be used much more effectively in the fight against insects. In fact the insects become more accessible. Moreover, preventative use of Alsa means that you need to spray with chemicals less frequently, which ensures that your crop remains in better condition.
You can use Alsa in all seasons to support the chemical and biological control of insects. However DeruNed advises that Alsa should be applied preventatively, which means beginning early in the spring. In fact, the earlier the insects come in contact with Alsa, the fewer insects can develop in your crop. Alsa does not stimulate resistance. If possible, administer Alsa using a dosing pump. If this is not possible, you should administer a one-week dose of Alsa in one day along with the nutrients. Do not use Alsa simultaneously with hydrogen peroxide products. Dosage Thrips: 400 – 800 ml per acre. (1- 2 lt./ ha.) repeat weekly. Other insects: 800 ml per acre. ( 2lt./ha.) Alsa remains active for 7 to 10 days. Storage Alsa can be kept for two months after opening. 
Alsa works systemically in the plant, which means that it can be administered with the nutrients. Alsa remains active in the plant for about 7 to 10 days. After this active period, the compounds are transformed in the plant into elements that are then used for normal metabolisation in the cells.
NAME
PROPTEC CODE
DESCRIPTION
VOLUME
Alsa
Der-ALS-5L
Deruned Alsa 5 litre
5 litre
Saponin
Natural wetting agent Saponin is a natural wetting agent based on extracts from the Yucca Schidigera. This plant contains exceptional sugar derivatives that enable it to survive under the extreme conditions of the desert. These sugar derivatives are isolated from the plant extract using a special process. Saponin gives a strengthened, multi-functional effect, which means that Saponin can be used as a wetting agent. Saponin improves the effectiveness of crop protection products, reduces the amount of visible residue, and ensures that the crop dries more quickly. Saponin is a 100% natural product. Saponin is based on natural plant extracts, and is therefore very safe for your crop. It is completely biologically degradable and does not cause leaf burn. Saponin is easily mixed with (cold) water and chemical crop protection products. Lowering the surface tension Saponin works in a similar way to other wetting agents. Lowering the surface tension of the fluid means that the fluid (and thus also crop protection products) spreads better over the crop. This means that the crop protection products work better, and it prevents residues. Moreover the fluid layer on the crop is thinner and therefore dries more quickly.
Application Saponin can be used throughout the year in both vegetables and flowers, on both substrate and natural soil. Saponin can be combined with all common products (integrated pest management). Dosage As a wetting agent: 1 to 2 litres per 1000 litres of water. As a crop dryer: Depending on crop and weather conditions, 1 to 2 litres per hectare is mixed in with the wash-down cycle. (the last few minutes of the irrigation time) Note: The product can foam up a little when being mixed, so it should be added last.
Fungal diseases have less chance
Storage
Saponin can not only be used as a wetting agent when spraying crops with crop protection products, but also as a crop dryer after rain or sprayed irrigation. A crop that dries more quickly has less risk of fungal diseases.
Saponin can be kept for two months after opening, providing the bottle is securely closed and stored in a cool, dark place. Once dissolved in water, Saponin breaks down after about 36 hours.
NAME
PROPTEC CODE
DESCRIPTION
VOLUME
Sapinon
Der-SAP-5L
Deruned Saponin 5 litre
5 litre
27
INDEX A Aeration.......................1, 3, 4, 6, 13, 23 Air Circulation....................................24 Air to Water Ratio............12, 13, 14, 22 Alsa...................................................26 Amorphous Volcanic Glass...............23 Automation.........................................6 B Baltic Peat.........................................24 Bio-Based Fibre.................................10 Bio-Based Non-Woven Felt ................18 Biodegradable...................................10 Biopolymer.......................................18 Biostrate...........................................18
28
C Caking................................................23 CatEyePlug .........................................4 Cation Exchange Capacity............12, 14 Cellular Foam....................................13 Cellular Rooting Sponge......................1 Coco Pith (CP)...................................21 Coconut Fibres..................................21 Chip (Husk)........................................21 Coir....................................................21 Crop Dryer..........................................27 Cut Flowers..........................................8 Cuttings and Seeds..........................6, 8 D Degradability.....................................10 Delicate Tissue Cultures......................3 Deruned............................................26 E Ellepot................................................8 Ellepot - Papertec...............................8 F Fiber............................................18, 19 Flowers.......................................11, 15 Foam Binder....................................1, 6 Foliage...............................................12 Forest Plants.......................................8 Forestry.............................................11 Fruit...................................................11 FSC-certified Forests..........................10 G Garlic.................................................26 Geraniums.........................................12 Gerbera.............................................22 Greenhouse...............................1, 6, 13 GreenTerra........................................24 Grow-Tech FlexiPlugs...........................1 Growth Stimulant..............................24 H Hemp Product..................................19 Herbicides.........................................19
Herbs................................................15 Hibiscus.......................................12, 14 Horticubes........................................24 Hydration...................................12, 14 I Insect..........................................12, 26 Invitro Express................................... 13 Thrips...............................................26 Insulator...........................................23 J JiffyCD...............................................22 Coir Blocks..........................21 Coir Discs............................22 Unwashed Coir...................21 L Landscape.............................10, 11, 15 Light Transmission.............................13 Liquid Culture...................................13 Liquid Organic Fertiliser....................25 M Magnesium (Mg)..............................22 Mandevilla ........................................14 Micro Cuttings..................................... 4 Micro-Greens..................................19 Microgreen Propagation ...................18 Micronutrients.............................1 Moisture.....................................1, 3, 23 Moisture Control................................. 6 N Natural Plant Extracts.................26, 27 Nutrient.....................12, 13, 23, 25, 26 Nuts..................................................11 O Oasis....................................12, 13, 14 OMRI................................................19 Orchids...............................................3 Organic Leaf Fertiliser.......................25 Organic Substance...........................24 Oriand...............................................25 Overwatering......................................3 P Paper Decomposition.......................11 Paper Life..........................................10 Paper Plug Root................................15 Pathogen.....................................12, 14 Peat............................................1, 6, 8 Perennials.........................................12 Perforation.......................................10 Perlite.....................................8, 22, 24 Permeability.......................................8 Pesticides.........................................19 pH................................1, 3, 4, 8, 18, 23 Plant Resistance................................25 Plant Shock................................12, 14
Plant Vigour.........................................1 Plant Yield...........................................8 Potted Plants................................8, 24 Pre Filled - FlexiTray.............................6 Pre-Rooted Cuttings............................4 PUREGrown................................19, 20 R RHP Certification...............................21 Rigid Vessel.......................................13 Rootcube Wedge..............................14 Rooting Cuttings.................................6 Root Development..............................8 Root Growth...................................1, 3 Root System..........................13, 14, 24 Rooting Period................................3, 4 Roses................................................14 S Salad Green................................18, 19 Salt Sensitive Crops...........................21 Saponin.............................................27 Seedlings..........................................19 Specialty Crops...................................6 Stabilised Growing Media...................1 Sterility..................................12, 14, 23 Stick Cuttings....................................14 Substrates.........................................24 Sugar Derivative................................27 Synthetic Fertiliser.............................19 T Tissue Culture.....................3, 4, 13, 15 Toxicity..............................................23 Transplant Shock................................8 Transplanting ......................6, 8, 12, 13 Trees...................................................3 U Un-Rooted Cuttings......................6, 12 Unbuffered Coir................................21 Unwashed Coir..................................21 V Vegetable................................8, 11, 15 Vermiculite.......................................24 Volcanic Ash......................................23 W Water....................................12, 13, 18 Wetting Agent...............................8, 27 Wheatgrass.................................18, 19 Wood Fibres......................................10 Woody Ornamentals...................12, 14 Y Young Plants.......................................8 Yucca Schidigera................................27
Terms & Conditions Terms of Payment and Credit Policy for Propagation Supplies Terms are strictly 30 days from on statement. The company will reserve the right at all times to suspend the supply of further goods on credit to the customer if account is overdue and credit limit exceeded. When noninventory items are ordered, a 20% deposit is required. Interest may be charged on accounts over 90 days at 1.25% per month. All orders for a new customer are to be prepaid before the goods leave PropTec’s premises. A payment form will be faxed to the customer prior to dispatch. Payment can be made by: • Direct Deposit to our Bank account for which the customer is requested to fax the receipt of bank deposit, if possible
Customers Responsibilities: The customer is to respond within 24 hours to the call from the transport company to pick up the goods. It is a good precaution to contact the transport company if not heard from them within 48 hours of stock having left PropTec . In the event of a missing consignment, the customer should first contact his receiving depot, advising them of the consignment note number and date the goods left PropTec. Upon its receipt the shipment is to be signed for after the shipment is inspected in the carrier’s presence. If damage is evident PropTec is to be contacted within 24 hours. PropTec Responsibilities: The propagation order will be packaged to the best of PropTec’s ability to withstand handling and movements on regular transport routes to all major centres in Australia.
• Credit Card – Visa, Mastercard, American Express
Property & Risk:
• Cheques or Cash
Property in and title to the goods shall remain with PropTec and PropTec reserves the right to dispose of the goods until such time that all moneys owing by the Buyer to PropTec have been paid in full. The risk in the goods purchased shall, unless otherwise agreed in writing, pass to the Buyer immediately upon the goods leaving PropTec premises.
Payment is to be received by PropTec by 12 noon the day before dispatch. Customers will remain on prepaid trading terms for at least 3 purchases and until their Credit Application has been approved and a credit account is opened. Ordering Propagation Supplies (PS): All orders are to be placed in writing, where possible by email to
Pick Up:
info@proptec.com.au or free fax 1800 644 015, stating quantities, product items, description and date required.
Orders may be picked up from PropTec under a 48 hours leadtime.
Limit of Liability:
Pick up hours are from 9am – 4pm Monday to Thursday and 9am – 12 noon on Friday. Weekends & public holidays PropTec is closed.
PropTec states and the Buyer acknowledges that any product item or descriptive information furnished in relation to the goods is based on information received from the product item manufacturer and is provided as a guide only. No liability will be accepted by PropTec or its Directors for any inaccuracy in the information provided. PropTec gives no further warranty, express or implied and all other or further warranties including any warranties of merchantability or fitness for a particular purpose are excluded. We shall not be responsible for loss of any product, profit or any other indirect special or consequential damages. Any mislabelled product is subject to our limit of liability, i.e. to the extent of the purchase price. Cancellation: All changes / cancellations must be in writing. Orders for goods received by PropTec are accepted with the understanding that they are not subject to cancellation once the goods are ordered from the manufacturer or manufacturing has commenced. Substitutions: Substitution could occur in the event of product item supply problems, unless we are advised otherwise. Propagation Supplies Freight Liability: PropTec accepts no responsibility for damage or delay following delivery to the original carrier. PropTec will however claim the cost value of the damaged goods on the customers’ behalf, provided Insurance has been taken out.
Product Claims: PropTec’s Customer Service must be called within 48 hours of receipt if a claim is to be honoured by PropTec. If the customer is not satisfied with the product/s and would like to request a credit, photos of the product/s must be emailed to info@ proptec.com.au or posted Attn: Customer Service, together with complete details of the claim. Short count claims must be made within 48 hours of receipt of orders. Before calling however the following is to be checked: *That the received number of items correspond with the invoice *The time that the order left the PropTec premises and the time of receipt. Prices: Prices shown in the PropTec catalogue may be varied without notice at any time. PropTec reserves the right to correct errors on invoices. Prices quoted in the PropTec Catalogue Price List do not include GST. Indent Propagation Supplies: Indent items require an additional 6 - 8 weeks lead time to allow for propagation supplies to be sourced out for availability.
29
horticultural products Proptec P 1300 137 584 F 1800 644 015 E info@proptec.com.au www.proptec.com.au
Michael Doensen VIC/TAS/SA/WA M 0400 737 783 E michaeld@highsun.com.au
Steph Geronimos Qld/Nthâ&#x20AC;&#x2122;n NSW M 0417 647 697 E stephanieg@highsun.com.au
Ron Sheldrick NSW/ACT/NT M 0419 843 885 E rons@highsun.com.au