CMR4 – CLOSE MEDIUM RANGE 1X-4X
W
seconds can be the deciding factor between success and failure.
62 grain 5.56 NATO BDC A to shoot distances up to 800 meters at 4X. The BDC marks can be used to frame a 1/2 meter target from end to end. The center opening of the BDC mark can be used to frame a 1/4 meter target. The 5 and 8 by the BDC holdovers correspond to the 10mph wind hold at 500m and
HD Low Dispersion Glass
H
fringing), allowing the shooter to see a sharper sight picture.
CMR4 Series Features: MRad Adjustment designed specifically for trajectory of standard 5.56mm (.223 Remington) & 7.62mm NATO (.308 Winchester) service ammo up to 600 meters.
Turret Covers Covers over the windage and erector unit stays uniform.
Perma-Coat S applied to the body of the scope. Ensures coat is resistant and protects exterior from scratches.
“ZRO-LOK” System The zero-locking system allows the scope’s alignment to be locked in place the scope is sighted in. Once the scope is locked in, this system offers minimal adjustment for slight tweaking of shot placement.
- Illuminated circle and center dot
Lenses All exterior air-glass lenses are treated transmission for more visibility in low
SPECIFICATIONS:
One click equals 0.1 MIL adjustment
Nitrogen Gas Purged - All scopes are purged with nitrogen gas to ensure they remain fogproof for range of temperatures.
to avoid interfering with the charging handle or bolt.
Waterproof Rubber O-ring prevents moisture,