Himes machinery offer OTC/Daihen 6-axis robotic welding cell new: 8 / 2007 with below mentioned specification: Model - AXMV4AP1-NEFU Condition: Excellent Price - $79,900
Specifications of OTC / Daihen robot control are: • Serial - L9672YZ5661410, Model - AXCAN1-U000 Specifications of OTC/Daihen digital inverter are: Serial - P10500YDK127871007, Model - DP500 Robot Reach: 55.5" ROBOT SPECIFICATIONS: Arm Revolving J1: +/- 170° Lower Arm J2: -155° to +90° Upper Arm J3: -170° to +180° Wrist Swing J4: +/- 155° Wrist Bending J5: -45° to +225°
Wrist Swing J6: +/- 205° Max. Velocity Arm Revolving J2: 2.62 RAD/S (150°/S) Max. Velocity Lower Arm J2: 2.79 RAD/S (160°/S) Max. Velocity Upper Arm J3: 2.97 RAD/S (170°/S) Max. Velocity Wrist Swing J4: 5.93 RAD/S (340°/S) Max. Velocity Wrist Bending J5: 5.93 RAD/S (340°/S) Max. Velocity Wrist Twist J6: 9.08 RAD/S (520°/S) Robot has 12' of Travel on Arc worker Robot Track Via AC Servo Rack & Pinion - Drive on Linear Guide Ways Robot Servo Motor with Brake & RV Gearbox, 1 Arc Min. Backlash ARCWORKER HSTS HEADSTOCK & TAILSTOCK POSITIONER: Headstock is AC Servo Driven Continuous Torque 32,745 In.-Lbs. at 10.8 RPM
Distance Between the Blanchard Ground 22" Dia. Face Plates: 176" Max. Swing: 60“ Weight Capacity: 5,456 Lbs. at 6" Offset Rotation: 1420° Max. with Infinite Position Selection Control & Programming is Thru the Robot Teach Pendant Weld Ground Capacity: 500 Amps at 100% Duty Cycle Welding Grounds at the Headstock & Tailstock 5716308 New 8/2007 Model - AXMV4AP1-NEFU EQUIPPED WITH OTC/Daihen Wire Feeder, Model - AF-4001 System Control Teach Pendant Miller Coolmate 4 Chiller Tough gun Torch Tender
(2) Regulator Flow Meters Full Set of Manuals & CD Controlled Magnetics 18 KVA Transformer
The Base the Robot Travels on is attached to the Positioner. Base with (2) 17" Long Connecting A Positioner: 18' L x 38" W x 48" H Robot on Base: 200" L x 41" W x 102" H Overall Size of Rack with Robot Control, Digital Inverter, 18 KVA Transformer & Disconnects: 87" L x 28" W x 62" H NOTE from Himes Machinery USA: There is NO Safety Cage with this System. Article Source - http://www.himesmachinery.com/welding-cells.html