AC C E S S O R I E S
The new F’NLITE neoprene is made with more air cells to increase warmth and decrease weight. Its lighter weight, absorbs less water, and provides superior warmth and durability. Warmth just got lighter.
RED SEAL SEAM
A thin, ultralight seam sealant that gives a water tight reinforcement without sacrificing flexibility and weight.
HYDROLOCK SEAM SEAL
PERFORMANCE FEATURES
FLEXIBILITY FEATURES
F’N LITE
FRONT ZIP ENTRY SYSTEM 1
CHEST ZIP ENTRY SYSTEM 2
ZIPPERLESS ENTRY SYSTEM 3
The front zip system assure you the waterproofing on the move.
The chest zip system increases waterproofing and flexibility.
This nifty zipperless design eliminates the weight and bulk of a sewn-in zip closure while increasing your freedom to move.
HYDROWRAP ADJUSTABLE NECK CLOSURE
WATER-BLOCK SEMIDRY ZIP
ECTO-FLEX KNEE PADS
SEMI-DRY ZIP
A completely adjustable neck closure system that creates a secure & watertight seal.
Free floating zipper technology. Off Set teet are coated to minimise water entry to keep you dry.
A durable, lightweight and flexible outer knee pad that protects you and your board.
GLIDE SKIN NECK SEAL
F-LOCK STITCHED SEAMS
DRAINAGE HOLE SYSTEM
An ultra-smooth neoprene liner for superior comfort and a watertight seal.
Free floating zipper technology that keeps you dry. Easy to get into and effortless to get out of.
Drainage ports to allow water out.
HYDROLOCK
SEAM S EA L
A thin bead of liquid tape used on GBS to prevent leaks. Making it the thinnest, lightest, and most flexible seal available.
BACK ZIP ENTRY SYSTEM 4
STITCHLESS HEAT BONDED
Glued bonded panels with interior stitching only, covered with the RED SEAL SEAM to remove exterior needle holes making the seams water tight, light and flexible for the best performance.
WARMTH FEATURES
Free floating zipper technology that will keeps you dry. Spend more time in the water, not getting into a suit. Easy to get into and effortless to get out of.
WARM FLIGHT FAR INFRARED
PLIO-TECH THERMAL AIR
GBS
FLUSH LOCK 2.0 SEALS
GBS
SEAM
Its unique construction helps to expel water, so you stay warmer and your suit stays lighter. Making it the warmest and fastest drying lining.
Plio-Tech Air Chambers is a closed cell neoprene technology that has engineered air chambers that trap and retain body heat providing a much better insulation on your chest and back.
Glued & Blindstitched construction is triple glued and single blind stitched seams. Reducing water entry to keep you warmer.
Elastic wrist, strategically placed seals to prevent water flushing through wrists and ankles.
HYDROSHIELD WATER BARRIER
LFS LIQUID FLEX SEAL
THERMAL SMOOTHIE
FUSED EDGES
Prevents water from entering the suit through the zipper, which will keep you warmer longer.
A stretchy, flexible liquid tape that seals GBS stitched seams. LFS refuses to leak and is extremely comfortable.
Maximum stretch mesh with superior heat inulation. The open air celll structure acts as a wind and water repellant to keep you warm when the water is not.
Engineered to create an incredibly low pro le at the end of the cuff providing an ergonomic fitting that prevents fushing through the neck, wrist and ankles.
VAPOR STRETCH MESH
NEOGOO
HYDROLOCK ANKLE SEAL
B-LOCK
Maximum stretch with high heat insulation. Wind & water repellent to keep you warmer.
Dipped in liquid neoprene, providing a perfect sealing that avoid leaking for better insulation.
An ultra-smooth neoprene liner to prevent leaks.
The evolution of warm water seam construction. Coil bound stitch provides greater stretch for increased performance and flexibility. Inner seam lays flat for ultimate comfort.
HIGHLINE NEOGOO BOOT GLIDESKIN NECK SEAL
FLUSH LOCK 2.0 SEALS
FUSED EDGES
An ultra-smooth neoprene liner for superior comfort and a watertight seal.
Elastic wrist, strategically placed seals to prevent water flushing through wrists and ankles.
Engineered to create an incredibly low profile at the end of the cuff providing an ergonomic fitting that prevents flushing through the neck, wrist and ankles.
Available in 5.0 & 3.0mm
ECTO-FLEX KNEE PADS
HYDROSHIELD WATER BARRIER (BZ ONLY)
HYDROWRAP ADJUSTABLE
The thinnest, lightest, and most flexible seal available. 60% thinner & lighter than our LFS seal. A thin bead of liquid tape used on GBS to prevent leaks.
A strechy, flexible liquid tape that seals GBS stitched seams. LFS refuses to leak and is extremely comfortable.
A thin, ultralight seam sealant that gives a water tight reinforcement without sacrificing flexibility and weight.
Back heel A durable, lightweight and flexible reinforcement outer to kneeput pad that protects you and your board. it on easier!
Split NECK Toe CLOSURE Prevents water from entering the suit A completely construction with adjustable neck clothrough the zipper, which will keep sure system that creates a secure & leash stop toe seal. you warmer longer. watertight guard.
SEAM TECHNOLOGY Glued and Blind Stitched seams
The seams are the skeleton of a wetsuit. They determine the strength, flexibility and watertightness of its construction, so it’s an important factor when selecting the right suit for you.
Glued & Blindstitched construction is triple glued and single blind stitched seams. The stitching on Triple Glued and Blind Stitched seams only partially penetrates the neoprene, which reduces water entry, keeping you warmer, longer.
Dipped in liquid neoprene, providing a perfect sealing and better insulation
Flat stitch construction across the neoprene panel. From 4 needles and 6 threads, it’s built by overlapping neoprene panels and sewing them together, not sealing them. This provides the perfect cooling system for your summer sessions.
The evolution of warm water seam construction. Coil bound stitch provides greater stretch for increased performance and flexibility. Inner seam lays flat for ultimate comfort.
Warmflight inside sole to retain heat longer
Textured soft sole for better grip & optimized board feel
HIGHLINE LITE BOOT Available in 3.0mm for men
Rubber suspension for better fit
Liquid Flex Seam sealing for no leak
Donut cuff pannel, ultra-smooth neoprene liner to prevent leaks
Warmflight inside sole to retain heat longer
Split Toe construction with leash stop toe guard.
Textured soft sole for better grip & optimized board feel
HIGHLINE LITE BOOT BOY Available in 5.0 & 3.0mm
Split Toe construction with leash stop toe guard. Liquid Flex Seam sealing for no leak
Rubber suspension for better fit
Warmflight inside sole to retain heat longer
Textured soft sole for better grip & optimized board feel
SYNCRO SPLIT TOE BOOTS Available in 3.0mm
Glued & Blindstitched construction is triple glued and single blind stitched seams. The stitching on Triple Glued and Blind Stitched seams only partially penetrates the neoprene, which reduces water entry, keeping you warmer, longer.
Velcro with silicone logo
Split Toe construction with leash stop toe guard.
Back heel SEAM TECHNOLOGY reinforcement to put The seamsGlued are the skeleton of a wetsuit. They determine the strength, flexibility and watertightness and Blind it on easier! of its construction, so it’s an important factor when selecting the right suit for you. Stitched seams
Flat stitch construction across the neoprene panel. From 4 needles and 6 threads, it’s built by overlapping neoprene panels and sewing them together, not sealing them. This provides the perfect cooling system for your summer sessions.
The evolution of warm water seam construction. Coil bound stitch provides greater stretch for increased performance and flexibility. Inner seam lays flat for ultimate comfort.
The thinnest, lightest, and most flexible seal available. 60% thinner & lighter than our LFS seal. A thin bead of liquid tape used on GBS to prevent leaks.
A strechy, flexible liquid tape that seals GBS stitched seams. LFS refuses to leak and is extremely comfortable.
Textured soft sole for better grip & optimized board feel
A thin, ultralight seam gives a water tight re without sacrificing fle weight.
SYNCRO ROUND TOE BOOTS Available in 3.0, 5.0 & 7.0mm
SEAM TECHNOLOGY
prevents flushing through the neck, wrist and ankles.
Back heel reinforcement to put it on easier!
Round Toe construction
Glued and Blind Stitched seams
The seams are the skeleton of a wetsuit. They determine the strength, flexibility and watertightness of its construction, so it’s an important factor when selecting the right suit for you.
Glued & Blindstitched construction is triple glued and single blind stitched seams. The stitching on Triple Glued and Blind Stitched seams only partially penetrates the neoprene, which reduces water entry, keeping you warmer, longer.
Velcro with silicone logo
Flat stitch construction across the neoprene panel. From 4 needles and 6 threads, it’s built by overlapping neoprene panels and sewing them together, not sealing them. This provides the perfect cooling system for your summer sessions.
The evolution of warm water seam construction. Coil bound stitch provides greater stretch for increased performance and flexibility. Inner seam lays flat for ultimate comfort.
The thinnest, lightest, and most flexible seal available. 60% thinner & lighter than our LFS seal. A thin bead of liquid tape used on GBS to prevent leaks.
A strechy, flexible liquid tape that seals GBS stitched seams. LFS refuses to leak and is extremely comfortable.
Textured soft sole for better grip & optimized board feel
A thin, ultralight seam sealant that gives a water tight reinforcement without sacrificing flexibility and weight.
An ultra-smooth neoprene liner for superior comfort and a watertight seal.
Elastic wrist, strategically placed seals to prevent water flushing through wrists and ankles.
Engineered to create an incredibly low profile at the end of the cuff providing an ergonomic fitting that prevents flushing through the neck, wrist and ankles.
HIGHLINE NEOGOO 3FG GLOVES Available in 5.0mm
A durable, lightweight and flexible outer knee pad that protects you and your board.
BARRIER (BZ ONLY)
NECK CLOSURE
Prevents water from entering the suit through the zipper, which will keep you warmer longer.
A completely adjustable neck closure system that creates a secure & watertight seal.
Natural feel grip
SEAM TECHNOLOGY Glued and Blind Stitched seams
The seams are the skeleton of a wetsuit. They determine the strength, flexibility and watertightness of its construction, so it’s an important factor when selecting the right suit for you.
Glued & Blindstitched construction is triple glued and single blind stitched seams. The stitching on Triple Glued and Blind Stitched seams only partially penetrates the neoprene, which reduces water entry, keeping you warmer, longer.
Flat stitch construction across the neoprene panel. From 4 needles and 6 threads, it’s built by overlapping neoprene panels and sewing them together, not sealing them. This provides the perfect cooling system for your summer sessions.
The evolution of warm water seam construction. Coil bound stitch provides greater stretch for increased performance and flexibility. Inner seam lays flat for ultimate comfort.
The thinnest, lightest, and most flexible seal available. 60% thinner & lighter than our LFS seal. A thin bead of liquid tape used on GBS to prevent leaks.
A strechy, flexible liquid tape that seals GBS stitched seams. LFS refuses to leak and is extremely comfortable.
A thin, ultralight seam sealant that gives a water tight reinforcement without sacrificing flexibility and weight.
TECH FEATURES NEOPRENE
All wetsuits are made of neoprene. Great wetsuits are made of great The higher the quality, the lighter, warmer and more flexible your wet
Dipped in liquid neoprene, providing a perfect sealing and better insulation FN’lite neoprene
High performance neoprene made from limestone derivatives. The benchmark when it comes to light-
THERMAL SMOOTHIE
Maximum stretch mesh with s heat inulation. The open a structure acts as a wind and
HIGHLINE NEOGOO 5FG GLOVES
SEAM TECHNOLOGY
Available in 2.0 & 4.0mm
Glued and Blind Stitched seams
The seams are the skeleton of a wetsuit. They determine the streng of its construction, so it’s an important factor when selecting the rig
Natural feel grip
Glued & Blindstitched construction is triple glued and single blind stitched seams. The stitching on Triple Glued and Blind Stitched seams only partially penetrates the neoprene, which reduces water entry, keeping you warmer, longer.
Flat stitch construction ac neoprene panel. From 4 nee 6 threads, it’s built by ove neoprene panels and sew together, not sealing them. vides the perfect cooling sy your summer sessions.
TECH FEATURES NEOPRENE
INNER LINING
All wetsuits are made of neoprene. Great wetsuits are made of great neoprene. The higher the quality, the lighter, warmer and more flexible your wetsuit will be.
FN’lite neoprene High performance neoprene made from limestone derivatives. The benchmark when it comes to lightweight flexibility.(16% lighter than Hyperstretch 3.0 neoprene)
THERMAL SMOOTHIE Maximum stretch mesh with superior heat inulation. The open air celll structure acts as a wind and water repellant to keep you warm when the water is not.
When combined with neoprene, the lining drastically reduces heat loss. Its unique construction helps to expel water, so you stay warmer and your suit stays lighter.
Dipped in liquid neoprene, providing a perfect sealing and better insulation
SYNCRO+ 5FG GLOVES Available in 2.0 & 4.0mm Tacky grip
TECH FEATURES NEOPRENE
INNER LINING
All wetsuits are made of neoprene. Great wetsuits are made of great neoprene. The higher the quality, the lighter, warmer and more flexible your wetsuit will be.
When combined with neoprene, the lining drastically reduces heat loss. Its unique construction helps to expel water, so you stay warmer and your suit stays lighter.
Liquid Flex Seam sealing for no leak Freemax neoprene High performance neoprene made from limestone derivatives. The benchmark when it comes to lightweight flexibility.(16% lighter than Hyperstretch 3.0 neoprene)
THERMAL SMOOTHIE Maximum stretch mesh with superior heat inulation. The open air celll structure acts as a wind and water repellant to keep you warm when the water is not.
ROXY PERFORMANCE BOOT Available in 3.0mm
Liquid Flex Seam sealing for no leak
Donut cuff pannel, ultra-smooth neoprene liner to prevent leaks
Split Toe construction with leash stop toe guard.
Velcro padding for increased comfort
Velcro rubber coating & printed Highline badge
Heel pull tab
Warmflight inside sole to retain heat longer
Textured soft sole for better grip & optimized board feel
SYNCRO ROUND TOE BOOTS Available in 5.0mm
SEAM TECHNOLOGY
prevents flushing through the neck, wrist and ankles.
Back heel reinforcement to put it on easier!
Round Toe construction
Glued and Blind Stitched seams
The seams are the skeleton of a wetsuit. They determine the strength, flexibility and watertightness of its construction, so it’s an important factor when selecting the right suit for you.
Glued & Blindstitched construction is triple glued and single blind stitched seams. The stitching on Triple Glued and Blind Stitched seams only partially penetrates the neoprene, which reduces water entry, keeping you warmer, longer.
Velcro with silicone logo
Flat stitch construction across the neoprene panel. From 4 needles and 6 threads, it’s built by overlapping neoprene panels and sewing them together, not sealing them. This provides the perfect cooling system for your summer sessions.
The evolution of warm water seam construction. Coil bound stitch provides greater stretch for increased performance and flexibility. Inner seam lays flat for ultimate comfort.
The thinnest, lightest, and most flexible seal available. 60% thinner & lighter than our LFS seal. A thin bead of liquid tape used on GBS to prevent leaks.
A strechy, flexible liquid tape that seals GBS stitched seams. LFS refuses to leak and is extremely comfortable.
Textured soft sole for better grip & optimized board feel
A thin, ultralight seam sealant that gives a water tight reinforcement without sacrificing flexibility and weight.