Fpdproductguide 2015 web

2015

product

GUIDE

KERCKHAERT | LIBERTY | RANGER | FOOTPRO™ FARRIERPRODUCTS™ | VECTOR | BELLOTA BLOOM FORGE | GIBBINS | MERCURY HOT IRON PRODUCTIONS | FDICK NORDIC FORGE | KNIPEX | VETTEC | HAWTHORNE

TABLE OF CONTENTS KERCKHAERT RANGER SERIES

Ranger Lite ......................................

Ranger Lite Rim ................................

Ranger Plain ....................................

Ranger Shoe Measurements ..............

1 1 1 2

KERCKHAERT AMERICAN SERIES STEEL SHOES

Standard .......................................... 3 Standard Lite .................................... 3 Standard Pony .................................. 3 Standard Extra .................................. 3 Standard Rim .................................... 4 Standard Lite Rim ............................ 4 Dura Plain ........................................ 4 SX-7 Unclipped ................................ 5 SX-7 Clipped .................................... 5 SX-8 Unclipped ................................ 6 SX-8 Clipped .................................... 6 Steel Triumph Unclipped .................... 7 Steel Triumph Clipped ........................ 7 Steel Triumph Lite Unclipped .............. 8 SX Roller Unclipped .......................... 8 Pride Sliding Plates 1/4" x 1" ............ 9 Pride Sliding Plates 1/4" x 1-1/4" ...... 9 Pride Sliding Plates 1/4" x 7/8" .......... 9 Pride Fine Sliding Plates 1/4" x 1" ...... 9 Pride 1/4" x 3/4" .............................. 9 Draft Series 28 x 10 Unclipped .......... 10 Draft Series 28 x 10 Clipped .............. 10 Draft Series 28 x 12 Clipped .............. 10 Draft Series 32 x 12 Clipped .............. 10 American Steel Shoe Measurements ........................ 11 - 12

KERCKHAERT EUROPEAN STEEL SHOES

DF ................................................

DF Quarter Clipped ..........................

DF Select ........................................

DF Grand Prix ..................................

DF Quarter Motion ..........................

Steel Comfort ..................................

Classic Roller Clipped ......................

Classic Fast Break (Roller) Unclipped Concave Clipped ..............................

Century Big Foot ............................

SSP Unclipped ................................

Meister Hufeisen ............................

European Steel Shoe Measurements ..............................

KERCKHAERT STANDARDBRED SHOES

Outer Rim Front ..............................

Outer Rim Hind ..............................

Full & Half Swedge Unclipped ............

Full & Half Swedge Hind Toe Clipped ..

9/16” & 5/8” Half Round Front ..........

TDR (Half Round) Front ......................

TNC Flat ..........................................

Standardbred Shoe Measurements ....

KERCKHAERT ALUMINUM RIDING SHOES

Aluminum Century Unclipped ............

Aluminum Century Degree Unclipped ..

Aluminum Century Clipped ................

Aluminum Comfort ..........................

Triumph Aluminum Unclipped ..........

Triumph Aluminum Clipped ..............

Triumph Aluminum Degree ................

Triumph Aluminum Eggbar ................

Aluminum Riding Shoe Measurements ..............................

13 13 13 14 14 14 15 15 16 16 17 17 18

19 19 20 20 21 21 21 22

23 23 23 24 24 24 25 25 25

KERCKHAERT RACING SHOES

Kings Plates - Flush Toe, XT, Low Toe and Regular Toe .................................. 26 Kings Degree Hind XT and Regular Toe .................................. 27 Kings Outer Rim XT .......................... 27 Kings Extra Sound Clipped ................ 27 Synergy XT .................................... 28 Syntra Regular Toe .......................... 28 Fast Break and Fast Break XT ............ 28 Tradition - XT, Low Toe, Regular Toe and Quarter Horse Toe .................. 29 Tradition Regular Toe and XT Clipped 30 Legendary XT .................................. 30 Steel Training ................................ 30 Blue Bond ...................................... 31 Smart Bond .................................... 31 No Vibe .......................................... 31 Racing Shoe Measurements ............ 32 Toe Grab Measurements .................. 32

FARRIERPRODUCTS™ BAR SHOES SX-7 and SX-8 Egg Bar, Heart Bar and Straight Bar ............................

Steel Triumph Egg Bar ......................

Standard Egg Bar ............................

DF Egg Bar ....................................

Half Round Egg Bar ........................

Classic Roller Egg Bar ......................

SSP Egg Bar ....................................

33 33 34 34 34 34 34

HORSESHOE NAILS

Liberty Horseshoe Nails .................... 35 Vector Horseshoe Nails .................... 36 Vector V-Trak .................................. 36

RASPS AND FILES

Bellota Top Sharp, Classic and Razor Rasps ............................

Bellota Raptor Rasp, Mini Rasp and Files ......................................

Bellota Tools ..................................

Mercury Hoof Rasps ........................

TOOLS, HOOF CARE AND EDUCATIONAL PRODUCTS

37 38 39 39

FootPro™ Tools ............................ 40-41 FootPro™, farrierproducts™ and Gibbins Aprons.................. 42 - 43 farrierproducts™ Tools ................ 44 - 45 FDick Hammers.................................. 45 Bloom Forge, fp™, FDick, Victorinox and Frost Hoof Knives .............. 46 - 47 Miscellaneous Tools .................. 48 - 49 Grinders and Abrasives .............. 50 - 51 Traction Products ............................ 52 Bloom Forge Tools .................... 53 - 54 Nordic Forge Tools .......................... 55 Hoof Care Products .......................... 56 Books ............................................ 57 Hot Iron Productions Videos ............ 58 Hoof Pads ................................ 59 - 60 FPD Field Guide .............................. 60

KERCKHAERT HORSESHOES

RANGER SERIES

Ranger Lite The Ranger Lite by Kerckhaert has been designed for everyday use in both work and pleasure. It is easily shaped, hot or cold, and has a generic shape for front or hind. With a higher grade of steel for better wear and v-crease for better fit, this shoe provides the perfect solution for farriers who want the best results at the best price.

NEW!

Punched for City or Slim.

One Shape - Unclipped - 000, 00, 0, 1, 2, 3

Ranger Lite Rim The Ranger Lite Rim is an excellent shoe for activities that require more traction than a flat shoe. A very popular style for rodeo event horses and general COMING IN trail use. With a higher grade of 2015! steel for better wear and v-crease for better fit, this shoe provides the perfect solution for farriers who want the best results at the best price. This shoe features sole relief.

Punched for City or Slim.

One Shape - Unclipped - 000, 00, 0, 1, 2, 3

Ranger Plain The Ranger Plain is a versatile shoe with extra thickness to provide additional wear, especially in rugged terrain. With a higher grade of steel for better wear and v-crease for better fit, this shoe provides the perfect solution for farriers who want the best results at the best price.

NEW!

Punched for City or Slim.

One Shape - Unclipped - 00, 0, 1, 2, 3

1

KERCKHAERT HORSESHOES

RANGER SERIES Width Inches

Length Inches

FIA Inches

RANGER LITE, LITE RIM AND PLAIN 000 00 0 1 2 3

4-1/4 4-1/2 4-3/4 5 5-5/16 5-3/4

4-1/2 4-3/4 5 5-5/16 5-5/8 6

11-3/4 12-3/8 13-1/8 13-7/8 14-3/4 15-11/16

t Horseshoe Line

Wears Longer and Plays Harder than all the rest

■

■ ■ ■ ■ ■ ■

Made in Holland for the North American market Easily shaped, hot or cold Punched for City or Slim nails High quality steel for better wear V-crease Generic shape for front or hind Best price

2

KERCKHAERT HORSESHOES

AMERICAN SERIES Âť STEEL

Standard Quality in a one shape pattern (no front or hind). The placement of the nails in a V-shaped crease allows you to nail with confidence, knowing the integrity of the hoof will not be compromised. Fuller toe, inside bevel, sole relief and slight taper to heel area. The pricing of the Standard is very competitive, the quality is unsurpassed. Shoes are symmetrical.

Punched for 5 City or 5 Slim.

One Shape - Unclipped - 00 (18x8), 0 (19x8), 1 (19x8), 2 (20x8), 3 (20x8)

Standard Lite Same quality as the well-known Standard Series shoe, the Standard Lite is a lighter version with 18x7 steel size.

This shoe has the same features as the Standard: one shape pattern and V-shaped crease. Fuller toe, inside bevel and slight taper to heel area. This is an attractive, economical series for horses that require a lighter shoe. Shoes are symmetrical.

Punched for 4-1/2 Regular, 5 Race, 5 City or 5 Slim, depending on size.

One Shape - Unclipped - 000, 00, 0, 1 (all 18x7)

Standard Pony The Standard Pony shoes have a very nice shape for ponies and even fit some miniatures.

Shoes are symmetrical.

Punched for 3-1/2 Race, 4-1/2 Race or 4-1/2 Slim.

One Shape - Unclipped - 8x0, 6x0, 4x0 (all 16x6)

Standard Extra A wide-web pattern designed to give protection and support - especially in rough terrain. Features include bevel on ground side, sole relief and slight tapering of heels. V-crease allows for better nail fit. Shoes are symmetrical.

Punched for 5 City or 5 Slim.

One Shape - Unclipped - 00, 0, 1, 2, 3

3

KERCKHAERT HORSESHOES

AMERICAN SERIES Âť STEEL

Standard Rim The Standard Rim is a one-shape pattern (no front or hind). This shoe is versatile and easily shaped to fit front or hind, without the pointed toe shape of other brands that makes it difficult to fit. The bevels on the inside and outside offer good breakover, as well as excellent grip in arena surfaces, trails and cross-country terrain. The full crease from heel to heel offers maximum traction. V-Crease ensures better nail fit. Shoes are symmetrical.

Punched for 5 City, 5 Race or 5 Slim.

One Shape - Unclipped - 0, 1, 2

Standard Lite Rim A one shape pattern with the same weight as the popular SX-7 series, this is an ideal shoe for the Quarter Horse in various disciplines, including roping, barrels and other timed events. The shoes are easily fit to front or hind and the punching helps maintain the integrity of the hoof. V-Crease ensures better nail fit. Fuller toe, inside bevel, and slight taper to heel area. Shoes are symmetrical.

Punched for 4-1/2 Regular, 5 Race, 5 City or 5 Slim, depending on size.

One Shape - Unclipped - 000, 00, 0, 1 (all 18x7)

Dura Plain This 3/8" thick generic shape shoe uses a high grade steel and good carbon content for extended wear. The Dura Plain meets the needs of horses working in rough and abrasive terrains. The shoe is available in a symmetrical shape with no front and hind.

Punched for city and slim blade nails.

One Shape - Unclipped - 00, 0, 1, 2 & 3

4

KERCKHAERT HORSESHOES

AMERICAN SERIES » STEEL

SX-7 Unclipped The first Kerckhaert shoe designed specifically for the North American market. These light, strong shoes are among the most popular in the line. Used for a wide variety of disciplines, these 1/4" shoes allow good nailing and fit without adding excess weight. Shoes are symmetrical. Sole relief on fronts.

Punched for 4-1/2 Regular, 5 Race or 5 Slim, depending on size.

Front – Unclipped – 4x0, 000, 00, 0, 1, 2 (all 18x7)

(Hind)

(Front)

Hind – Unclipped - 4x0, 000, 00, 0, 1, 2 (all 18x7)

SX-7 Clipped The best light, clipped shoe on the market. The front pattern is quarter clipped and the hinds come with side clips. Because light shoes are often the most difficult to clip, you’ll find these are an excellent option. Strong clips on well made shoes with sole relief.

Toe area is slightly wider to provide strength and wear. Shoes are symmetrical.

Punched for 4-1/2 Regular, 5 Race or 5 Slim, depending on size.

Front - Quarter Clipped - 000, 00, 0 and 1 (all 18x7), 2 (19x7) Hind - Side Clipped - 000, 00, 0 and 1 (all 18x7), 2 (19x7)

5

KERCKHAERT HORSESHOES

AMERICAN SERIES Âť STEEL

SX-8 Unclipped Demand for shoes punched for City head nails brought forth the SX Series. The SX-8 is a 5/16" thick shoe with graduated widths.

These shoes are used for trail, jumping, dressage and ranch work.

Shoes are symmetrical. Sole relief on fronts.

Punched for 5 City, 5 Slim or 5 Combo.

Front - Unclipped - 00 (19x8), 0 (19x8), 1(20x8), 2 (20x8), 3 (22x8)

(Hind)

(Front)

Hind - Unclipped - 00 (19x8), 0 (19x8), 1(20x8), 2 (20x8), 3 (22x8)

SX-8 Clipped Efficiency is the name of the game. These shoes have a strong clip from top to bottom; quarter clip fronts, side clips behind. Because the clip is not drawn from the web of the shoe, the integrity of the nail holes and shoe strength is protected. Toe area is slightly wider to provide strength and wear. Front shoes have sole relief. Shoes are symmetrical.

Punched for 5 City, 5 Slim or 5 Combo.

Front - Quarter Clipped - 00 (19x8), 0 (19x8), 1 (20x8), 2 (21x8), 3 (22x8), 4 (22x8) Hind - Side Clipped - 00 (19x8), 0 (19x8), 1 (20x8), 2 (21x8), 3 (22x8), 4 (22x8)

6

KERCKHAERT HORSESHOES

AMERICAN SERIES Âť STEEL

Steel Triumph Unclipped The Triumph steel series is considered the premier shoe for a variety of disciplines, including event horses, cross-country and various rodeo applications. Kerckhaert has added additional thickness in sizes 0 - 3. Excellent front and hind shape and steeper bevel in toe provides good breakover and less chance of slipping. Sole relief and good heel support Shoes are symmetrical.

Punched for 5 City or 5 Slim.

Front - Unclipped - 00, 0, 1, 2, 3 Hind - Unclipped - 00, 0, 1, 2

Steel Triumph Clipped The clipped version of Kerckhaert's popular Steel Triumph offers all of the great features you’ve come to love about the Steel Triumph - and the clips provide additional security and less stress on the nails. Quarter clipped fronts; side clipped hinds. Kerckhaert has added additional thickness in sizes 0 - 3. This change is especially beneficial if you use clipped shoes on event horses with larger feet. Shoes are symmetrical.

Punched for 5 City or 5 Slim.

Front - Quarter Clipped - 00, 0, 1, 2, 3 Hind - Side Clipped - 00, 0, 1, 2, 3

7

KERCKHAERT HORSESHOES

AMERICAN SERIES Âť STEEL

Steel Triumph Lite Unclipped This series is designed specifically for the Quarter Horse and other breeds that don’t require heavy steel for good performance. The front shape is slightly narrower than the regular Triumph series and makes fitting of the shoe much easier. With the lighter section of steel, this series has quickly become a favorite of performance horses in the ring and out. Boxed heels and sole relief. Shoes are symmetrical.

Punched for 4-1/2 Regular, 5 Race, 5 City or 5 Slim, depending on size.

Front - Unclipped - 000, 00, 0, 1 Hind - Unclipped - 000, 00, 0, 1

SX Roller Unclipped With features similar to the Classic Roller, this shoe is an excellent choice for horses needing additional ease of breakover, whether for movement in performance, or simply more comfort because of injuries or chronic ailments. While this half round style boasts more ground surface than a true half round, it allows the ease of breakover half round shoes are noted for. The crease gives traction while not taking away from the rollover effect of the shoe.

Punched for 5 City, 5 Slim or 5 Combo.

Front - Unclipped - 00, 0, 1, 2

8

KERCKHAERT HORSESHOES

AMERICAN SERIES Âť STEEL

Pride Sliding Plates Kerckhaert has introduced a new level of quality to the reining and roping horse market with the Pride series of sliding plates. There is an excellent heel finish on all models. All Pride Series shoes are punched precisely for 4-1/2 Race, 4-1/2 Race XS, 4-1/2 Slim or 5 Special and require little filing to reduce the head of the nail. All Pride Series shoes are symmetrical.

1/4" x 1" This is the most popular style in the line. Good all-around performance choice. This style is made with higher carbon steel for better wear and has a slight taper to 7/8" in the heel area. 6 nail hole pattern on all sizes.

Hind - 11, 11.5, 12, 13

1/4" x 1-1/4" A slightly wider version of the Pride Sliding Plates. Also tapered to 7/8".

Hind - 11, 12, 13

1/4" x 7/8" Excellent option for reining and roping horses, especially younger horses. High quality steel provides durability and strength.

Hind - 10, 11, 12

Pride Fine Sliding Plates 1/4" x 1" The Pride Fine series of sliding plates offers a choice for the farrier that prefers a finer punching pattern. The series is available in a 1/4" x 1" stock size, with a very slight taper in the heel area. The nail pattern works best for a shoe fit that is very close to a perimeter fit, where the shoe is not set forward.

Hind - 10, 11, 12

Pride 1/4" x 3/4" Versatility in a one shape pattern (no front or hind) best describes this flat shoe from Kerckhaert. Ideal for use with young roping horses and training for sliding horses. Also useful for other disciplines where a light, plain stamped shoe is required. No crease.

One Shape - 00, 0, 1, 2

9

KERCKHAERT HORSESHOES

AMERICAN SERIES » STEEL

Draft Series 28x10 Unclipped Responding to the North American market’s demand for lighter shoes without clips, Kerckhaert produced the unclipped 3/8" x 1-1/8" series. The shapes correspond to the natural shape of the draft horse. Shoes are symmetrical.

Punched for 7 or 8 Regular head.

Front and Hind - Unclipped - 5, 6, 7, 8

Draft Series 28x10 Clipped It’s a tradition to toe clip front and hind shoes for the workhorse to prevent the shoes from being driven back during work in the fields or on the streets. Kerckhaert provides a strong clip to make sure the job is done well. 3/8" x 1-1/8". Shoes are symmetrical.

Punched for 7 or 8 Regular head.

Front and Hind - Toe Clipped - 5, 6, 7, 8

Draft Series 28x12 Clipped These smaller draft shoes are often used on Haflingers, carriage horses and even Friesians in North America. This is a strong shoe that gives good wear.

1/2" x 1-1/8".

Punched for E-8, E-9 or E-10, depending on size.

Front and Hind - Toe Clipped - 3, 4

Draft Series 32x12 Clipped The most demanding of environments won’t overwork these shoes. Anytime the work your horses are asked to do involves rough terrain, this is your most likely choice. Logging, packing, or whatever you are doing, these shoes have the strength to hold up and protect the hoof. 1/2" x 1-1/4" Punched for E-8, E-9 or E-10, depending on size.

Front and Hind - Toe Clipped - 5, 6, 7, 8

10

KERCKHAERT HORSESHOES

AMERICAN SERIES » STEEL Width Inches

Length Inches

FIA Inches

3-1/2 3-3/4 4-1/8 4-3/8 4-5/8 4-7/8 5 5-1/4 5-1/2

3-1/2 3-7/8 4-1/8 4-1/2 4-3/4 5 5-1/8 5-3/8 5-3/4

9-1/2 10-1/4 11 11-7/8 12-1/2 13-1/4 13-5/8 14-3/8 15-1/4

4-3/8 4-5/8 4-7/8 5 5-1/4 5-1/2 6 6-1/8

4-3/8 4-1/2 4-3/4 5-1/8 5-1/4 5-3/8 5-7/8 6-1/8

11-3/4 12-1/4 12-7/8 13-1/2 14-1/8 14-5/8 15-7/8 16-5/8

4-1/4 4-3/8 4-5/8 4-7/8 5 5-1/4 5-5/8 6

4-3/8 4-1/2 4-3/4 5 5-1/8 5-3/8 5-3/4 6-1/8

11-3/4 12 12-1/2 13-1/8 13-3/4 14-3/8 15-3/8 16-1/4

3-7/8 4-1/8 4-1/4 4-3/4

4-3/4 5-1/4 5-3/4 6-1/4

12 13 14-1/4 15

STANDARD 8x0 6x0 4x0 000 00 0 1 2 3

SX-7, SX-8 & SX ROLLER Front 4x0 000 00 0 1 2 3 4 Hind 4x0 000 00 0 1 2 3 4

SLIDING PLATES 10 11 12 13

11

KERCKHAERT HORSESHOES

AMERICAN SERIES » STEEL Width Inches

Length Inches

FIA Inches

6-1/8 6-3/8 6-7/8 7-1/8 7-1/2 7-7/8

5-7/8 6-1/4 6-5/8 7-1/8 7-3/8 7-5/8

16-1/4 17 18-1/2 19-1/8 20 21

5-7/8 6-1/8 6-5/8 7 7-1/4 7-1/2

5-7/8 6-1/4 6-1/2 7 7-3/8 7-5/8

15-1/2 16-1/2 17-7/8 18-3/4 19-5/8 20-1/2

DRAFT Front 3 4 5 6 7 8 Hind 3 4 5 6 7 8

STEEL TRIUMPH AND TRIUMPH LITE 4-5/8 4-7/8 5 5-1/4 5-1/2 5-3/4

4-5/8 4-7/8 5 5-1/4 5-5/8 5-3/4

12-1/2 13 13-3/4 14-1/2 15 15-3/4

4-3/8 4-5/8 4-7/8 5-1/8 5-3/8 5-5/8

4-1/2 4-3/4 5 5-1/4 5-1/2 5-3/4

12 12-5/8 13-1/4 14-3/8 14-7/8 15-1/2

FIA NUMBER MEASUREMENT HEEL TO HEEL

< Length >

Front 000 00 0 1 2 3 Hind 000 00 0 1 2 3

< Width >

12

KERCKHAERT HORSESHOES

EUROPEAN SERIES » STEEL

DF

The DF series of shoes is a European line of shoes. This line has become very popular in recent years. Made for the discerning farrier who requires finesse and attention to detail in his work. The DF line offers the broadest selection in features such as fronts and hinds, left and right foot patterns, different web sizes, clip positioning and nail hole sizing according to the size of the shoe.

Punched for E-head.

8 mm - Front Toe Clipped - 5x0 (20x8), 4x0 (20x8), 000 (20x8), 00 (20x8), 0 (20x8 & 22x8), 1(20x8, 22x8), 2 (22x8 & 25x8), 3 (22x8 & 25x8), 4 (25x8) 8 mm - Hind Side Clipped - 4x0 (20x8), 000 (20x8), 00 (20x8), 0 (20x8 & 22x8), 1 (20x8, 22x8 & 25x8), 2 (22x8 & 25x8), 3 (22x8 & 25x8), 4 (25x8), 5 (25x8) 10 mm - Front Toe Clipped - 1 (22x10), 2 (22x10), 3 (22x10 & 25x10), 4 (22x10 & 25x10), 5 (25x10) 10 mm - Hind Side Clipped - 0 (20x10), 1 (22x10), 2 (22x10), 3 (22x10 & 25x10), 4 (22x10 & 25x10), 5 (25x10)

DF Quarter Clipped The front shape DF shoes with quarter clips are the fastest growing style in the A class Jumper circuit. The variety of steel sizes, combined with the excellent clip style and punching, has helped lead Kerckhaert to the top in this segment of the market. Available in 8 mm and 10 mm thickness. Shoes are symmetrical.

Punched for E-head.

8 mm - Front Quarter Clipped - 00 (19x8), 0 (20x8), 1 (22x8), 2 (22x8), 3 (24x8), 4 (25x8), 5 (25x8) 10 mm - Front Quarter Clipped - 1 (22x10), 2 (22x10), 3 (22x10), 4 (22x10 & 25x10), 5 (25x10), 6 (25x10)

DF Select

Specifically designed for the hunter jumper market where additional support is required.

Heels are elongated and tapered. Widest part of shoe is moved forward, allowing an “extended" heel fit.

Punched for E-head.

8 mm - Hind Side Clipped - 0 & 1 (20x8), 2, 3 (22x8) 10 mm – Hind Side Clipped – 1 (21x10), 2, 3, 4 (25x10), 5 (25x10)

13

KERCKHAERT HORSESHOES

EUROPEAN SERIES Âť STEEL

DF Grand Prix This is a special hind shoe with a wider outside branch to give additional support in the heel area.

Especially designed for the hunter jumper market.

Punched for E-head.

8 mm - Hind Side Clipped - 0 (20x8), 1 (22x8), 2 (22x8), 3 (24x8), 4 (25x8)

DF Quarter Motion The DF Quarter Motion is designed with a beveled toe on the ground surface which allows the hoof and limb to breakover with less stress and strain. The bevel continues around the branches of the shoes, a feature that allows for more comfortable lateral movement as well. The great Kerckhaert shape means the shoes are easy to fit and the quarter clips allow the shoe to be positioned to maximize performance. The shoes also have built-in sole relief. Shoes are symmetrical.

Punched for E-head nails. Front only.

Front - 0, 1, 2 (22x8), 3 (24x8), 4 (25x8)

Steel Comfort The Steel Comfort meets the demands of farriers looking for a high quality shoe that aids in breakover. Key design features include rolled toe and branches, better breakover that improves coordination of movement and optimized balance with less pressure on the tendons. Built-in sole relief.

Punched for Liberty E-4 Slim and 5 Combo.

Front - Side Clipped - 00, 0, 1, 2, 3, 4

14

KERCKHAERT HORSESHOES

EUROPEAN SERIES Âť STEEL

Classic Roller Clipped This half round style actually boasts more ground surface than a true half round but you get the full benefit of ease of break-over that half round shoes are noted for. The full shape of the front pattern allows for easy fitting. The width of the sections gives a great base of support. Available in quarter clipped or toe clipped front, side clipped hind. Classic Roller Fronts are symmetrical.

Punched for E-head.

Front - Quarter Clipped - 00 (20x8), 0 (20x8), 1 (22x8), 2 (22x8), 3 (22x8 & 24x8), 4 (24x8) Front - Toe Clipped - 1 (22x8), 2 (22x8), 3 (24x8) Hind - Side Clipped - 0, 1, 2 (all 22x8), 3 (24x8)

Classic Fast Break (Roller) Unclipped Many horses in the market have strong walls and donâ&#x20AC;&#x2122;t require the use of clips. The unclipped Classic Fast Break complements the clipped series with the same great breakover features. The wider overall shape of this shoe is an excellent choice for horses that need additional ease of breakover for either movement in performance or simply for more comfort because of injuries or chronic ailments.

Punched for E-head.

Front - Unclipped - 0 (22x8), 1 (22x8), 2 (24x8)

15

KERCKHAERT HORSESHOES

EUROPEAN SERIES Âť STEEL

Concave Clipped Kerckhaert offers an excellent selection of concave shoes; their shapes and punching result in a premium product. The Concave series also boasts the innovative radius clips found on many of the other Kerckhaert series. Quarter and toe clipped fronts and side clipped hinds.

Punched for E-head.

Front Quarter Clipped â&#x20AC;&#x201C; 0 (20x10), 1 (20x10 & 22x10), 2 (22x10), 3 (22x10) Front Toe Clipped - 00 (20x10), 0 (20x10), 1 (20x10 & 22x10), 2 (22x10), 3 (22x10), 4 (23x11) Hind Side Clipped - 00 (20x10), 0 (20x10), 1 (20x10 & 22x10), 2 (22x10), 3 (22x10), 4 (23x11)

Century Big Foot Kerckhaert has addressed the problem many farriers run into with the warm blood influence in the market. Sizes 6 & 7 fill a much needed gap in shoe size selection in the market. Creased through the toe, with an inner bevel and solid heels, this shoe series provides an excellent choice for larger riding or carriage horses. Century Big Foot Fronts are symmetrical.

Punched for E-head.

11 mm - Front Toe Clipped - 4, 5 (all 25x11) 11 mm - Hind Side Clipped - 4, 5 (all 25x11) 12 mm - Front Toe Clipped - 6, 7 (all 28x12) 12 mm - Hind Side Clipped - 6, 7 (all 28x12)

16

KERCKHAERT HORSESHOES

EUROPEAN SERIES » STEEL

SSP Unclipped The original unclipped style, most popular on the hunter jumper circuit.

A broad choice of steel sizes, made in front and hind patterns - left and right, makes this an extremely versatile series.

Punched for E-head.

8 mm - Front Unclipped - 4x0 (18x8), 000 (18x8), 00 (19x8), 0 (20x8), 1(20x8 & 22x8), 2 (22x8), 3 (22x8) 8 mm - Hind Unclipped - 4x0 (18x8), 000 (18x8), 00 (19x8), 0 (19x8 & 20x8), 1 (20x8 & 22x8), 2 (20x8 & 22x8), 3 (22x8) 10 mm - Front Unclipped - 1, 2, 3, 4, 5 (all 22x10) 10 mm - Hind Unclipped - 1, 2, 3, 4, 5 (all 22x10)

Meister Hufeisen The Meister is wider at the toe and in the heel area where the foot needs the most support, the branches are narrower so that they are more easily modified. The Kerckhaert Meister is a series designed and made for the German market; therefore, the sizing is different. The number on the Meister shoe is two sizes larger than normal Kerckhaert sizing for riding shoes. In addition, the mark on the Meister shoe is a "D" instead of the "K" you find on the regular Kerckhaert shoe. Meister Fronts are symmetrical.

Punched for E-head.

Meister Sizing »

0

1

Kerckhaert Sizing » 000 00

2

3

4

5

6

7

0

1

2

3

4

5

8 mm - Front Quarter Clipped - 0 (19x8), 1 (19x8), 2 (20x8), 3 (21x8), 4 (21x8), 5 (22x8), 6 (22x8), 7 (22x8) 8 mm - Front Toe Clipped - 3 (21x8), 4 (21x8), 5 (22x8), 6 (22x8) 8 mm - Hind Side Clipped - 0 (19x8), 1 (19x8), 2 (20x8), 3 (21x8), 4 (21x8), 5 (22x8), 6 (22x8), 7 (22x8) 10 mm - Front Quarter Clipped - 3 (21x10), 4 (21x10), 5 (22x10), 6 (22x10) 10 mm - Hind Side Clipped - 3 (21x10), 4 (21x10), 5 (22x10), 6 (22x10), 7 (22x10)

17

KERCKHAERT HORSESHOES

EUROPEAN SERIES » STEEL Width Inches

Length Inches

FIA Inches

4-1/4 4-3/8 4-5/8 5 5-1/4 5-3/8 5-5/8 6 6-1/4 6-5/8 7-1/8 7-3/8

4-1/8 4-3/8 4-1/2 4-3/4 5 5-1/4 5-1/2 6 6-1/4 6-3/8 7 7-1/4

11-3/8 11-3/4 12-3/8 13 13-5/8 14-1/4 15-1/4 16-1/4 16-7/8 17-3/4 18-1/4 20

4-1/8 4-1/4 4-1/2 4-3/4 5 5-1/8 5-1/2 5-3/4 6-1/8 6-3/8 6-7/8 7-1/8

4-1/8 4-3/8 4-1/2 4-3/4 5 5-1/4 5-1/2 5-7/8 6-1/4 6-1/2 7 7-3/8

11-1/4 11-1/2 11-7/8 12-1/2 13-1/4 13-3/4 14-3/4 15-1/2 16-1/4 17-1/4 18-3/4 19-1/2

EUROPEAN Front 5x0 4x0 000 00 0 1 2 3 4 5 6 7 Hind 5x0 4x0 000 00 0 1 2 3 4 5 6 7

INCHES TO MILLIMETER COMPARISON CHART Scale 3 times actual size Inch 0

1/16 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

Millimeter

18

KERCKHAERT HORSESHOES

STANDARDBRED

Outer Rim Front We refer to this shape as the Standardbred because of its narrower, longer shape that is very typical of the Standardbred front foot.

This aluminum shoe is proving to be a tough, good wearing shoe for the Standardbred surfaces, but can also be used successfully with Thoroughbreds. The punching is also slightly deeper to help get good nailing. Available unclipped or toe clipped with a 2 mm toe grab. Shoes are symmetrical.

Punched for 4-1/2 Race or 4-1/2 Slim.

Unclipped - 4, 5, 6, 7, 8, 9 Toe Clipped - 4, 5, 6, 7, 8, 9, 10

Outer Rim Hind While Kerckhaertâ&#x20AC;&#x2122;s Outer Rim Hind is an ideal shape for Standardbreds, this aluminum shoe can also be used successfully on Thoroughbreds. It has a strong toe clip, unique surface finish with sole relief and a 2 mm toe grab. Shoes are symmetrical.

Punched for 4-1/2 Race or 4-1/2 Slim.

Toe Clipped - 4, 5, 6, 7, 8

19

KERCKHAERT HORSESHOES

STANDARDBRED

Full & Half Swedge Unclipped For years the market had no choice in the Standardbred shoe market. The introduction of the Kerckhaert Swedges, made with a tough, durable steel is a dream come true for many. The shapes of the shoes are a significant improvement and the careful consideration seen in the nail placement and support in the heels are noticeable features.

Punched for 4-1/2 Race, 4-1/2 Slim or 5 Race.

Front - Full Swedge - 1, 1.5, 2, 2.5, 3, 3.5, 4, 6 Hind - Half Swedge - 1, 1.5, 2, 2.5, 3, 3.5, 4

Full & Half Swedge Hind Toe Clipped The clipped version of the Kerckhaert Full and Half Swedge offer additional security for the shoeing cycle. The strong toe clip of these shoes will help avoid the problems of shoes sliding back while in performance or in the stall. The support in the heel area, with a slightly wider lateral heel will increase the chances of keeping your horses sound. Excellent shape minimizes time spent on fitting shoes.

Punched for 4-1/2 Race, 4-1/2 Slim or 5 Race.

Full Swedge Hind Toe Clipped - 1, 1.5, 2, 2.5, 3, 3.5, 4 Half Swedge Hind Toe Clipped - 1.5, 2, 2.5, 3, 3.5, 4

20

KERCKHAERT HORSESHOES

STANDARDBRED

9/16" & 5/8" Half Round Front The Standardbred market has long relied on the half round style to train and race. The Kerckhaert design gives better heel support and a much more realistic nail pattern to help with the performance of the horse. The shape of the shoes minimizes the amount of work needed to get a good fit. A high quality steel provides excellent wear and support for the foot. Shoes are symmetrical.

Punched for 4-1/2 Race, 4-1/2 Slim or 5 Race.

9/16" Unclipped - 1.5, 2, 2,5, 3, 3.5, 4 5/8" Unclipped - 2, 3, 4

TDR (Half Round) Front The TDR is creased, giving good traction as well as the breakover it's famous for. There are three choices of stock size - 1/2", 5/8" & 3/4".

1/2" (14x6) - Unclipped - 00, 0, 1, 2 5/8" (16x8) - Unclipped - 000, 00, 0, 1, 2 3/4" (18x9) - Unclipped - 00, 0, 1, 2

TNC Flat The Kerckhaert TNC series has been used for many years in the trotting market in Europe. Made with a very tough material, this flat shoe has creases that are easily fit and used for the typical Standardbred race horse. This series helps with the challenge of gaiting the young horse, as well as fitting the needs of aged horses.

Hind (14x5) - Unclipped - 000, 00, 0, 1, 2 Hind (16x6) - Unclipped - 1, 2 Front (18x6) - Unclipped - 1, 2

21

KERCKHAERT HORSESHOES

STANDARDBRED Width Inches

Length Inches

FIA Inches

4-1/2 4-3/4 5 5-1/8 5-1/4 5-1/2 5-9/16

4-1/2 4-3/4 5 5-1/8 5-3/8 5-7/8 6-3/16

12-1/2 12-3/4 13-3/8 13-7/8 14-1/2 15-1/2 16

4-1/4 4-1/2 4-7/8 5 5-1/4

4-1/4 4-1/2 5-1/8 5-1/2 5-3/4

11-7/8 12-1/2 13-1/2 14-3/8 15-1/8

4-1/2 4-3/4 5 5-1/8 5-3/8 5-1/2 5-3/4 6-3/4

11-7/8 12-1/2 13 13-1/2 14-1/8 14-5/8 15 17-3/8

4-3/4 5 5-1/4 5-1/2 5-5/8 5-7/8

12-5/8 13-1/8 13-3/4 14-1/8 14-5/8 15

OUTER RIM Front 4 5 6 7 8 9 10 Hind 4 5 6 7 8

FULL & HALF SWEDGE 1 1.5 2 2.5 3 3.5 4 6

4 4-1/4 4-3/8 4-5/8 4-7/8 5 5-1/8 5-1/4

9/16" & 5/8" HALF ROUND 1.5 2 2.5 3 3.5 4

4-3/8 4-1/2 4-5/8 4-7/8 5 5-1/8

22

KERCKHAERT HORSESHOES

ALUMINUM Âť RIDING

Aluminum Century Unclipped The Aluminum Century Unclipped series provides farriers who prefer the Sole Kerckhaert Triumph Relief Aluminum an option for smaller feet. This shoe is a good fit for feet that require a narrower shape, with less width in the toe. Shoes are symmetrical.

Punched for 4-1/2 Regular, 5 Race or 5 Slim.

Front - Unclipped - 000, 00, 0, 1, 2

Aluminum Century Degree Unclipped Kerckhaert has produced the Aluminum Century Degree to complement the Aluminum Century Unclipped shoe. Farriers will find a wedge platform on this shoe, with many of the features of the unclipped series.

Shoes are symmetrical.

Sole Relief

Punched for 4-1/2 Regular, 5 Race or 5 Slim.

Front - Unclipped - 000, 00, 0, 1

Aluminum Century Clipped The Century Support front pattern is a more traditional round shape.

Thicker than Triumph for additional strength and without the broad toe.

Sole Relief The shoes have a slightly finer punch. Designed with support in the toe and heel area similar to the Meister steel shoes. Available in front and hind patterns. Quarter clipped front, side clipped hind. Shoes are symmetrical.

Punched for 4-1/2 Regular, 5 Race or 5 Slim.

Front - Quarter Clipped - 00, 0, 1, 2, 3 Hind - Side Clipped - 00, 0, 1, 2, 3

23

KERCKHAERT HORSESHOES

ALUMINUM » RIDING

Aluminum Comfort An addition to the Comfort series that offers a lighter weight option. Key design features include - rolled toe and branches, better breakover improves coordination of movement, optimizes balance, less pressure on the tendons. Adequate thickness to provide strength and durability. Toe insert to increase wear. Built-in sole relief.

Punched for E-head and 5 Combo. 0 & 1 – E-4 Slim; 2 & 3 – E-5 Slim.

Front - Side Clipped - 00, 0, 1, 2, 3

Triumph Aluminum Unclipped The Triumph is a drop forged aluminum shoe that has an optimum front shape. These shoes are commonly used by the Western Pleasure market as well as the Hunter and Thoroughbred shoer. Wellplaced nail holes allow for good nailing and choices when the wall is less than perfect. The sole relief is built in - saving you time. The material is a high grade aluminum that provides good wear and strength. Shoes are symmetrical.

Punched for 4-1/2 Regular, 5 Race or 5 Slim.

Front - Unclipped - 4x0, 000, 00, 0, 1, 2, 3

Triumph Aluminum Clipped The Triumph Clipped shoes have all the same features as the unclipped version, while offering the strength of quarter clips. Shoes are symmetrical.

Punched for 4-1/2 Regular, 5 Race or 5 Slim.

Front - Quarter Clipped - 000, 00, 0, 1, 2, 3, 4

24

KERCKHAERT HORSESHOES

ALUMINUM Âť RIDING

Triumph Aluminum Degree Triumph Degree has the same features of the Triumph Aluminum flat shoes - with added lift for improved performance.

Shoes are symmetrical.

Punched for 4-1/2 Regular, 5 Race or 5 Slim.

Front - Unclipped - 000, 00, 0, 1, 2, 3

Triumph Aluminum Egg Bar Triumph aluminum egg bars offer all of the popular features of the Triumph series - with the additional support that is characteristic of barshoes.

Shoes are symmetrical.

Punched for 4-1/2 Regular, 5 Race or 5 Slim.

Front - Quarter Clipped - 000, 00, 0, 1, 2, 3

Width Inches

Length Inches

FIA Inches

ALUMINUM TRIUMPH, CENTURY AND COMFORT 4x0 000 00 0 1 2 3 4

4-3/8 4-1/2 4-3/4 5 5-1/4 5-1/2 5-5/8 6-1/8

25

4-1/4 4-1/2 4-7/8 5 5-1/4 5-1/2 5-3/4 6-1/8

11-3/4 12-1/2 13-1/8 13-3/4 14-1/4 15-1/8 15-7/8 16-5/8

KERCKHAERT HORSESHOES

ALUMINUM Âť RACING

Kings Plate (Flush Toe) The Kings Plate is used in turf racing and is often used in the early training stages of the race horse. It is also a very good shoe for the western pleasure show horse and smaller hunters.

The features of this shoe include a flush toe insert, sole relief, good nail placement with plenty of options, and a heel taper that saves time. The web of the shoe is slightly wider providing a good base of support and strength to prevent spreading.

Front or Hind - Unclipped - 2, 3, 4, 5, 6, 7, 8

Kings XT (2 mm) The XT version of the Kings Plate is also allowed on many turf tracks. Commonly used by trainers when horses may race either on turf or dirt. Toe grab is 3/32" (2 mm) above the surface of shoe.

Front - Unclipped - 2, 3, 4, 5, 6, 7, 8 Hind - Unclipped - 4, 5, 6, 7, 8

Kings Low Toe (3.9 mm) The Kings Low Toe style offers another option for dirt tracks. The toe grab is 3/16" (3.9 mm) above the surface of the shoe.

Front - Unclipped - 3, 4, 5, 6, 7, 8

Kings Regular Toe (5.5 mm) The Regular Toe is used primarily on dirt tracks. The toe grab is 1/4" (5.5 mm) above the surface of the shoe. The hind pattern is often used in conjunction with other styles of front shoes. The web of the shoe is slightly wider providing a good base of support and strength to prevent spreading, especially on "stall kickers."

Front or Hind - Unclipped - 3, 4, 5, 6, 7, 8

All Kings Plates are symmetrical and are punched for 3-1/2 Race, 3-1/2 Race XL, 4-1/2 Race or 4-1/2 Slim.

26

KERCKHAERT HORSESHOES

ALUMINUM Âť RACING

Kings Degree Hind XT (2mm) and Regular Toe (5.5 mm) This is a hind pattern shoe used most often to raise the heels on a horse that has a tendency to run down behind. Available in hind pattern only, it comes with two toe grab styles; XT and Regular toe. The Regular toe is also available with toe clips.

XT Hind - Unclipped - 4, 6, 7 RT Hind - Unclipped - 4, 5, 6, 7 RT Hind - Toe Clipped - 4, 5, 6, 7

Kings Outer Rim XT (2 mm) This outer rim style has the classic Kings shape, rounder in the toe and quarters. Used primarily on Thoroughbred racehorses, the Outer Rim offers a lot of traction.

Front only.

Front - Unclipped - 4, 5, 6

Kings Extra Sound Clipped Racing markets in various parts of the world have found clips to be extremely useful in keeping shoes secure. The North American racing market has also been moving in this direction. The side clipped Kings plates are available in a flush toe style with wider web for additional support.

Hind - Side Clipped - 4, 5, 6, 7, 8

All Kings Plates are are punched for 3-1/2 Race, 3-1/2 Race XL, 4-1/2 Race or 4-1/2 Slim.

27

KERCKHAERT HORSESHOES

ALUMINUM Âť RACING

Synergy XT (2 mm) The Synergy shoe is available with an XT insert only (2 mm). This shoe eases problems that occur on synthetic surfaces as a result of too much traction using beveled aluminum that comes to the top of the insert in front of the toe. Synergy XT Fronts and Hinds can be used on any track surface, including those requiring a toe grab of no more than 2mm. Hinds are also available with toe clips.

Front and Hind - Unclipped - 3, 4, 5, 6, 7 Hind - Toe Clipped - 4, 5, 6, 7

Syntra Regular Toe The Syntra series is a unique Kerckhaert design, excellent for training and racing on dirt tracks; allowing easier breakover while still providing the traction needed for coming out of the gate. With beveled aluminum coming to the top of the insert in front of the toe grab and a rolled toe, this versatile shoe is also a good choice for racing on synthetic surfaces where a regular toe is allowed (5.5mm).

This is a hind pattern with toe clip only.

Hind - Toe Clipped - 4, 5, 6

Fast Break & Fast Break XT The Fast Break series is available with a flush toe insert or XT toe grab (2mm). The narrower pattern, with a slight radius already in the toe has met with accolades. Top trainers are finding this to be a dream, especially on younger horses. Less stress on the upper limb, and better hoof condition as well, make it an excellent option on the racetrack.

Front - Unclipped - 4, 5, 6, 7 XT Front - Unclipped - 4, 5, 6, 7

Synergy, Syntra, Fast Break and Fast Break XT are symmetrical and are punched for 3-1/2 Race, 3-1/2 Race XL, 4-1/2 Race or 4-1/2 Slim.

28

KERCKHAERT HORSESHOES

ALUMINUM Âť RACING

Tradition Series The Tradition series racing plates from Kerckhaert offer the North American market an option for shoeing styles and feet that require a narrower pattern than the Kings. The main design differences are the shape, a slight taper in the width from toe to heel, a nail pattern that is spread and punched slightly finer. This has met with a good response from farriers in the market. They are finding that the Tradition and the Kings shape have a place in their trucks due to the wider variations of front shaped feet.

Tradition XT Toe (2 mm) 2 mm toe grab, allowed on turf and synthetic tracks throughout North America. Front and hind patterns.

Front - Unclipped - 3, 4, 5, 6, 7, 8 Hind - Unclipped - 3, 4, 5, 6, 7

Tradition Low Toe (3.9 mm) 3.9 mm toe grab, allowed on all dirt tracks and some synthetic surfaces in North America. Available unclipped and front pattern only.

Front - Unclipped - 4, 5, 6

Tradition Regular Toe (5.5 mm) 5.5 mm toe grab, allowed on most dirt tracks. Commonly used on front feet of racing Quarter Horses. Front and hind patterns.

Front - Unclipped - 3, 5, 6 Hind - Unclipped - 3, 4, 5, 6, 7

Tradition Quarter Horse Toe (8mm) 8 mm toe grab, used behind on some Thoroughbreds on dirt tracks and many racing Quarter Horses.

Hind - Unclipped - 3, 4, 5, 6, 7

All Tradition Series shoes are symmetrical and are punched for 3-1/2 Race, 3-1/2 Race XL, 4-1/2 Race or 4-1/2 Slim.

29

KERCKHAERT HORSESHOES

ALUMINUM » RACING

Tradition Regular Toe and XT Clipped The Tradition clipped shoes have hit the market at a full gallop. They are excellent in stall situations where concrete or cement block is the construction type. The clips of the Kerckhaert shoes are recognized for their strength and appropriate size.

XT - Hind - Toe Clipped - 4, 5, 6, 7 Regular Toe - Hind - Toe Clipped - 4, 5, 6, 7

Legendary XT (2mm) The Legendary shoe is a front only pattern that provides additional thickness for strength and wear with high grade aluminum. It features wide Sole Relief and beveled heels with toe nail position that allows use of a nail puller. Sand blasted foot surface.

XT - Front - 4, 5, 6, 7

Steel Training Light and Heavy. Whether you’re shoeing for the Keeneland select sale or putting the first shoes on the “runner" down the road, the DR 15x7 or Kings DR 16x8 will fit the bill. The shoe shapes, combined with excellent nail placement and fit, make shoeing the yearling or two year old a lot easier.

Front - DR 15x7 - Unclipped - 24, 25, 26, 27, 28, 29, 30 Front - Kings DR 16x8 - Unclipped - 27, 28, 29, 30, 32

Race Size »

24

25

26

27

28

29

30

32

0

1

2

3

4

5

6

7

Tradition, Legendary and Steel Training shoes are symmetrical and are punched for 3-1/2 Race, 3-1/2 Race XL, 4-1/2 Race or 4-1/2 Slim.

30

KERCKHAERT HORSESHOES

ALUMINUM » RACING

Blue Bond The material of the Blue Bond withstands the punishment of the track. The nail holes are already punched through the material and a sole relief is built-in, saving time.

Kings XT - Front - 3, 4, 5, 6, 7 Outer Rim - Front - 6, 7, 8 Tradition XT - Front - 4, 5, 6, 7

Smart Bond™ A race plate designed to allow for absorption of pressure from the heels and bars.

These specially designed plates feature the Blue Bond material in a “drop-down" design which adds very little weight to the shoe.

Tradition XT – Front – Unclipped - 4, 5, 6, 7

No-Vibe Applied by No-Vibe, this bonded shoe is known throughout the market for the success it’s seen. The Yellow Pads are available on Kerckhaert, the finest race plates in the market.

Kings XT - Front - Unclipped - 3, 4, 5, 6, 7, 8 Kings Low Toe - Front - 4, 5, 6 Kings Outer Rim XT - Front - Unclipped - 4, 5, 6 Tradition XT - Front - Unclipped - 4, 5, 6, 7 Tradition XT - Front - Toe Clipped - 4, 5, 6

Blue Bond, Smart Bond™ and No-Vibe are symmetrical and are punched for 3-1/2 Race, 3-1/2 Race XL, 4-1/2 Race or 4-1/2 Slim.

31

KERCKHAERT HORSESHOES

ALUMINUM » RACING Width Inches

Length Inches

FIA Inches

4-1/8 4-3/8 4-1/2 4-5/8 4-7/8 5 5-1/2 5-3/4

11-3/8 11-3/4 12-1/2 12-3/4 13-1/2 13-7/8 15 15-1/4

KINGS RACE PLATES Front 2 3 4 5 6 7 8 9

4-3/8 4-5/8 4-7/8 5 5-1/4 5-3/8 5-5/8 5-1/2

KINGS, TRADITION, SYNERGY & SYNTRA RACE PLATES

Hind 2 3 4 5 6 7 8

4-1/4 4-1/2 4-5/8 4-3/4 5 5-1/4 5-1/2

4-1/8 4-3/8 4-1/2 4-3/4 5 5-1/8 5-1/4

11-1/8 11-5/8 12 12-5/8 13-1/4 13-7/8 14-1/4

4-3/8 4-1/2 4-3/4 4-7/8 5-1/8 5-1/2

11-3/4 12-1/4 12-5/8 13-1/4 14 15-1/8

TRADITION, SYNERGY & LEGENDARY

Front 3 4 5 6 7 8

4-1/2 4-5/8 4-3/4 5 5-1/8 5-5/8

Toe Grab Measurements

Quarter Horse Toe: 8 mm Regular Toe: 5.5 mm Low Toe: 3.9 mm XT: 2 mm Flush: 0 mm

32

farrierproductsâ&#x201E;˘

BAR SHOES

SX-7 and SX-8 Egg Bar Our bar shoes are carefully fabricated using the Kerckhaert shoes and the same steel for the bars. Available in a variety of styles, these bar shoes have become the most popular brand in North America. The SX-7 are the lighter shoes in the series. Commonly used in the quarter horse and light horse market. The SX-8 is used in a variety of disciplines, especially where strength and good support are required. SX-7 and SX-8 Bar Shoes are symmetrical.

SX-7 are punched for 4-1/2 Regular, 5 Race or 5 Slim, depending on size. SX-8 are punched for 5 City, 5 Slim or 5 Combo.

SX-7 - Front - Unclipped - 00, 0, 1, 2 SX-7 - Front - Quarter Clipped - 000, 00, 0, 1, 2 SX-8 - Front - Quarter Clipped - 00, 0, 1, 2, 3, 4 SX-8 - Hind - Side Clipped - 00, 0, 1, 2, 3, 4

SX-7 & SX-8 Heart Bar SX-7 - Front - Quarter Clipped - 000, 00, 0, 1, 2 SX-8 - Front - Quarter Clipped - 00, 0, 1, 2, 3, 4

SX-7 & SX-8 Straight Bar SX-7 - Front - Quarter Clipped - 00, 0, 1, 2, 3 SX-8 - Front - Quarter Clipped - 0, 1, 2, 3, 4, 5

Steel Triumph Egg Bar Excellent shoe for event horses.

Punched for 5 City, 5 Race and 5 Slim.

Front - Quarter Clipped - 00, 0, 1, 2, 3

33

farrierproductsâ&#x201E;˘

BAR SHOES

Standard Egg Bar The Standard is the most basic bar shoe in the farrierproductsâ&#x201E;˘ line. It is available in a one shape pattern without clips. A versatile shoe, this series can be shaped for front or hind feet. Shoes are symmetrical.

Size 000 punched for 5 Race or 5 Slim. Sizes 00, 0, 1 and 2 punched for 5 City or 5 Slim.

One Shape - Unclipped - 000, 00, 0, 1, 2

DF Egg Bar This is a clipped shoe that has similar steel sizes to the SX-8.

Punched for E-head.

Front - Quarter Clipped - 0, 1, 2, 3, 4 Hind - Side Clipped - 0, 1, 2, 3

Half Round Egg Bar The TDR is made with approximately 3/4" half-round stock. This gives additional help with breakover while giving plenty of support.

3/4" (18x9) - Unclipped - 0, 1, 2

Classic Roller Egg Bar This clipped shoe features greater ground surface than a true half round to ease breakover.

Punched for E-4 Slim and E-5 Slim.

Front - Clipped - 00, 0, 1, 2, 3 (22x8), 3 and 4 (24x8)

SSP Egg Bar Providing an option for the very large foot, this 22x10 mm shoe is available unclipped only.

Punched for E-head.

Front - Unclipped - 5

34

6 REGULAR (54.0mm) Ú

E-3 SLIM (47.5mm) Ú

35

E-8 (63.0mm) Ú

E-7 SLIM (61.0mm) Ú

E-6 SLIM (57.5mm) Ú

E-5 SLIM (54.0mm) Ú

LX-65 (57.0mm) Ú

LX-60 (55.0mm) Ú

LX-55 (53.5mm) Ú

LX-50 (50.0mm) Ú

8 REGULAR (63.0mm) Ú

7 REGULAR (59.0mm) Ú

5 REGULAR (50.0mm) Ú

E-2 SLIM (45.5mm) Ú

E-4 SLIM (51.0mm) Ú

6 SLIM (54.0mm) Ú

LX-70 (59.0mm) Ú

6 CITY (53.0mm) Ú

5 COMBO SLIM (52.5mm) Ú

5 COMBO (49.5mm) Ú

5 SLIM XL (52.5mm) Ú

5 SLIM (50.0mm) Ú

5 CITY (50.0mm) Ú

5 RACE (47.0mm) Ú

4-1/2 RACE (44.0mm) Ú

3-1/2 RACE XL (41.0mm) Ú

3-1/2 RACE (38.5mm) Ú

LIBERTY

HORSESHOE NAILS High quality nail designed by Kerckhaert Horseshoe Company with precise and consistent specifications that provide consistent driving, excellent points and outstanding finish.

Available in 2015: 10 Combo.

VECTOR

HORSESHOE NAILS A wide range of nails produced for superior quality and performance.

Vector nails are packaged in durable plastic containers with color coded labels indicating the different nail styles. All boxes contain 250 nails. 5 Race, 5 City and 5 Slim are also available in boxes containing 100 nails. Many nail sizes are available in Farrier Packs - containing 1,250 nails.

E-6 SLIM Ú

REGULAR HEAD 6 Ú

E-5 SLIM Ú

REGULAR HEAD 5 Ú

E-4 SLIM Ú

REGULAR HEAD 4-1/2 Ú

E-3 SLIM Ú SPECIAL 5 Ú VX-60 Ú SPECIAL 4-1/2 Ú VX-50 Ú RACE 5 Ú 6 CITY Ú

RACE 4 1/2 XS Ú 5 CITY Ú RACE 4-1/2 Ú

5 SLIM XS Ú

RACE 3-1/2 XS Ú

5 SLIM Ú

RACE 3-1/2 Ú

4-1/2 SLIM Ú

Vector V-Trak The consistency of the hard facing combined with the high tensile strength of the Vector nails has produced a traction product that has met the demands of the professional farrier. Prices are very competitive.

Available in sizes 4-1/2 Race, 5 City, 6 City and E-4 Slim. Packed in 100 piece plastic boxes.

36

BELLOTA

RASPS

Bellota Rasps, Files and Tools The Bellota brand has been a leader in the North American market since the early 80â&#x20AC;&#x2122;s. We are pleased to offer these products through our farrierproductsâ&#x201E;˘ dealers.

Top Sharp Rasp The aggressive design of the file side on the Top Sharp lets you get in and get out with maximum results.

Classic Rasp The smooth cut of the classic file side is the best choice for a smooth finish.

Razor Rasp Like its name implies, the rasp side of the Razor offers an extreme cut when compared to other Bellota rasps, while the file side is also coarser. This 14" rasp incorporates a tooth design to reduce clogging and to retain its sharpness.

37

BELLOTA

RASPS AND FILES

Raptor Rasp The extra width of this rasp â&#x20AC;&#x201C; 1/2" wider than other Bellota Rasps â&#x20AC;&#x201C; provides a greater cutting surface. The 14" Raptor features a maximum cut on the rasp side; with a coarse cut on the file side.

Mini Rasp Like the Top Sharp, the aggressive design of the file side on the new Bellota Mini Rasp lets you get in and get out with maximum results - but has an overall length of 13" - making it very handy for working on foals, ponies and miniature horses. Handle is included.

Top Finish File

Farriers looking for a finish flat file have agreed that the 14" Top Finish File exceeds their expectations. One side is coarse, with the other being fine.

Pipeliner and Half Round Files

This is the tool preferred by many competitors when finishing the shoes and foot. The 14" Pipeliner File offers a single cut as opposed to the double cut design of the 14" Half Round File.

6" and 8" Knife Files Mill bastard with 2 round edges. Each file is checked, one by one, to ensure quality and provide perfect filing. All Bellota files are protected by a rust proofing treatment.

38

BELLOTA

TOOLS

Hammers

• 6 oz. Driving Hammer • Hammer Handle Replacements • Cross Pein Hammer (1.25, 1.61, 2 lb.)

Other Tools from Bellota • • • • • • •

9" Nail Cutter Wood Rasp Handles (Clear) Half Round 14" File Center Punch Wire Hoof Brush Drive-On Handle for Rasps and 14" Files Drive-On File Handle for 6" & 8" Files

MERCURY

RASPS

Mercury Rasps • Produced according to the highest standards • Position of the teeth on the rasp side and the unique composition of steel ensures the rasp will stay sharp longer • Excellent reviews from farriers

39

FootPro™

TOOLS

FootPro™ FootPro™ is a brand developed by FPD based on years of feedback from professional farriers. The detailed finish by skilled craftsmen is a trademark for the FootPro™ line that focuses on engineering using the highest quality of steel and heat treatment. All FootPro™ tools are fully polished for additional comfort.

FootPro™ Nippers A new 12" nipper has been added to the FootPro™ line, featuring a larger head than the existing FootPro™ 12" nipper and the reins are rounded in the same fashion as the 14" nipper. This tool works well for farriers that prefer a larger head but don't want the length of a 14" nipper. Nippers in the FootPro™ line are 12" Regular, 12" Race Track, 14", 15" and 14" Race Track. These tools are competitively priced and are backed by our quality service and standard warranty.

FootPro™ Angled Clincher The angled, ergonomic design of the FootPro™ Clincher allows easier clinching with less stress on your wrists. The teeth of this tool have proven to be extremely durable under the most trying of circumstances.

FootPro™ Saddlehorse Clincher A traditional style saddle horse clincher has been added to the FootPro™ tool line. Made of high grade tool steel, this clincher is fully polished, providing comfort and reliability.

40

™

FootPro™

TOOLS

FootPro™ Nail Puller The FootPro™ Crease Nail Puller is designed for higher leverage with less effort. This tool is 11-1/2" long, made using high-grade tool steel and is fully polished for handling comfort. Used properly, this tool will provide long-term service and make the pulling of nails a much easier task.

FootPro™ Rounding Hammers The design of the FootPro™ 1-3/4 lb. and 2 lb. hammers draw on ideas provided by professional farriers regarding the balance and details of a well performing forging hammer. All details of forging, machining, tempering and finishing were carefully scrutinized by respected tradesmen.

Hammers are forged with high quality steel, are 16" in overall length, fully polished and feature a 1-5/8" diameter face.

FootPro™ Silicone Wrap for Tool Handles The FootPro™ handle wrap is a versatile tape that works well as a handle wrap. The tape will fuse onto itself after two minutes and will not allow repositioning. It has a very high tensile strength, will not melt up to 500 Fº, stays flexible to -60 Fº and will stretch up to 300%.

This tape resists UV rays and weathering and is better than duct tape and other wraps. The tape is available in 10 ft. rolls.

41

APRONS FootPro™ Aprons A design similar to our Model K aprons but with improved fit, material quality and design. Outside of leg is wider, with knife pockets dropped lower so they are out of the way when working.

FootPro™ Aprons are manufactured in the USA and are a light-weight material with leather pads.

MEASUREMENTS FootPro™ Short Length - 26"

FootPro™ Long Length - 31"

fp™ Aprons - Light and Leather The Model K Light Apron is made with Proban fire retardant material that is light but tough. It is reinforced in the crotch area and the leather pads give good coverage. It has two knife pockets and the belt snaps at the hip and has an adjustable buckle as well.

The Model K Leather has two knife pockets and the belt snaps at the hip and has an adjustable buckle as well.

MEASUREMENTS Model K Light Short

Model K Light Long

Model K Leather Short

Model K Leather Long

Length - 26" Length - 26"

Length - 30" Length - 30"

Gibbins Tear-Away and Hipster Flamemaster Excellent cover to inside of legs with velcro fastenings at thigh and waist.

Waist adjustment with 2" buckle and pocket on each leg.

Combines state of the art technology in flame retardant finishing with the hardwearing and aesthetic properties of cotton rich polyester blends.

MEASUREMENTS Tear-Away Hipster Flamemaster Short - Length - 22" Long - Length - 28"

Tear-Away Flamemaster

Short - Length - 26" Long - Length - 32"

42

APRONS Gibbins Tear-Away Superthistle Excellent cover to inside of legs with velcro fastenings at thigh and waist. Waist adjustment with 2" buckle and pocket on each leg. Specially designed for use by farriers, it retains its moisture and tends to leather-up with use. Strong and supple without excess weight.

MEASUREMENTS Tear-Away Tear-Away Superthistle Long Superthistle Short Length - 26"

Length - 34"

Gibbins Closed Front Wrap-Round Superthistle Hipster Long Apron Excellent cover to inside of legs with velcro fastenings at thigh and waist.

Waist adjustment with 1.5" buckle and pocket on each leg. Specially designed for farriers, it is constructed from top of the range suede, it retains its moisture and tends to leather-up with use. Strong and supple without excess weight.

MEASUREMENTS Closed Front Wrap-Round Hipster Superthistle Long Length - 30"

Gibbins Back Pads These supportive, fleece-lined back pads fit any Gibbins apron and are designed to distribute pressure across the back, creating a more comfortable fit. The pad is washable and available in medium and large. The approximate dimensions are: Medium 10"x5" and Large 15"x6.75".

43

farrierproducts™

TOOLS

fp™ Saddlehorse Clincher Forged from high quality tool steel, precision machined, and heat treated for strength and durability. Fully polished.

fp™ Outer Rim Clincher The custom design of fpTM's new Outer Rim Clincher allows the jaw to reach the nail head even when below the outer rim. The clincher is polished, forged from high quality tool steel, precision machined and heat treated for strength and durability. Excellent tool for race track farriers.

fp™ 12" Pull Off Polished

They are used in removal of shoes and can also be used to cut nails without damage to the blades. Fully polished.

fp™ Nail Puller Black

Get in there and get the nails out, without hurting the hoof wall.

Perfect for creased and fullered shoes.

44

farrierproducts™

TOOLS

fp™ Rasp Handles Our aluminum rasp handles have two sets of hex head set screws to securely hold rasp in place. Available in 3 sizes: 1-1/4", 1-1/2", and 1-3/4". Comes with L shaped hex wrench.

fp™ Knife Sharpener High quality knife sharpener is made of diamond coated solid steel with plastic handle.

fp™ Brass Ruler 24" brass ruler - folds in the middle; inches on one side, millimeters on the other.

Typically used in measuring steel when forging shoes.

fp™ Brass Hoof Balance Ruler 12" brass ruler - inches on one side, millimeters on the other. Can be used to check the medial/lateral balance of the foot.

FDick Nylon Hammers

35mm head diameter has a shorter handle than FDick 40mm Nylon Hammer.

Handy size for use with an undercut or cutting clinches.

40mm head diameter is particularly useful when used with a toeing knife and blocking and cutting clinches. FDick Nylon Hammers extend the life of the tool being struck and creates less concussion for the horse.

45

HOOF KNIVES

Bloom Forge Regular & Offset Blade • Made of knife-grade, hardened carbon steel • Unique diamond wood handle

• Right or left handed • Blade length: 2-1/2" • Handle length: 5-1/2"

Bloom Knife Comfort Grip • Slimmer diamond wood handle • Offset blade

• Right or left handed • Blade length - 2-5/8" • Handle length - 5-1/2"

Bloom Forge Loop • Made of knife-grade, hardened carbon steel • Unique diamond wood handle

• Blade length: 2-1/4" • Handle length: 5-1/2"

Bloom Forge Special Knife • Made of knife-grade, hardened carbon steel • Curved blade • Narrower and longer wooden handle

• Right or left handed • Blade length: 2-1/2" • Handle length: 5-7/8"

fp™ Wide & Narrow Blade • Made in Germany • Made of high quality steel blade • Right or left handed

• Blade length: 2-1/2" • Handle length: 5-7/8"

fp™ Double Edge Right • Made in Germany • Made of high quality steel blade

• Blade length: 3" • Handle length: 5-3/4"

46

HOOF KNIVES

FDick Wide & Narrow • Made in Germany • Right or left handed

• Blade length: 3" • Handle length: 5-3/8"

FDick Gripmaster • Made in Germany • Special contoured handle • Right or left handed

• Blade length: 2-1/2" • Handle length: 5-1/2"

FDick Ascot • Made in Germany • Right or left handed

• Blade length: 2-1/2" • Handle length: 5-3/8"

FDick Double Edge Right • Made in Germany

• Blade length: 3" • Handle length: 5-3/8"

Victorinox Regular & Double Edge • Made in Switzerland • Right or left handed and Double Edge Right

• Blade length: 3-1/8" • Handle length: 5-1/8"

Frost (Mora) Wide, Narrow and Double Edge • Made in Sweden • Right or left handed

• Blade length: 2-7/8" • Handle length: 5-1/8"

47

MISCELLANEOUS

ITEMS

Knipex Tools Farriers recognize the tough, durable construction of this brand of cutters. You can count on these cutters to hold up to the daily demands of cutting horseshoe nails.

KNIPEX 8" ULTRA CUT

KNIPEX 8" NAIL CUTTER

KNIPEX 12" POWER CUT

KNIPEX 12" CUTTER WITH CLINCH BLOCK

Magnets • • • • •

2" Round Magnet 2 5/8" Round Magnet 3 1/8" Round Magnet Hammer Handle Magnet Liberty Wrist Magnet

Jumbo Butcher Block Brush Jumbo Flat Wire Block Brush with a wood handle. 9-1/4" x 3-3/4". Wire trim length 1-1/4". A great tool for cleaning scale during forging.

48

MISCELLANEOUS

ITEMS

Bellota Wire Hoof Brush Used for cleaning the foot before beginning the trimming process.

Rasp and File Handles • Twist-On Plastic (Orange & Green) • Twist-On Wood (Long & Short) • Drive-On Wood • fp™ Aluminum Rasp Handles • Bellota Wood Rasp Handles • Drive-On Wood 6" and 8" File Handles • Bellota Drive-On Rasp Handle for Rasps and 14" Files • Bellota Drive-On File Handle for 6" Files • Bellota Drive-On File Handle for 8" Files

Replacement Handles • • • • • • •

Bloom Forge - 13-1/2" and 14-1/2" Driving Hammer Handle Bloom Forge - 18" Rounding Hammer Handle Bloom Forge - Punch and Creaser Handle fp™ - 16" Wide Grip Hammer Handle (fits Bloom and FootPro™) FootPro™ - 16" Hammer Handle Diamond - 36 oz. Rounding Hammer Handle Horsehead - 8 oz. and 12 oz. Hammer Handle

Kerckhaert Tool Bag • Canvas tool bag is 2'x1' when zipped shut • Adjustable, removable shoulder strap included • Multiple pockets for better organization of tools • Black with Kerckhaert logo

49

GRINDERS AND ABRASIVES

1/4 HP Buffer 1/2 HP Grinder

Baldor Buffers and Grinders • 1/4 HP Buffer (1800 RPM) • 1/2 HP Grinder and 3/4 HP Grinder (3600 RPM)

Heel Finish Disc

Expander Wheel

Attachments for 1/2 HP & 3/4 HP Grinders • 7" Aluminum Heel Finish Disc with Spacer • 6" and 10" Expander Wheel with Guard

FootPro™ 2"x36" & 2"x48" Grinding Attachments • FootPro™ 2"x36" and 2"x48" grinder attachments • The 8" contact wheel makes the attachment more compact and produces a significantly higher belt speed, in the same way the Expander wheels do • Fits any 1/2 hp or larger grinder with a shaft at least 2-1/2" long and 5/8" in diameter • Wide range of both 2"x36" and 2"x48" belts that fit these units

50

GRINDERS AND ABRASIVES Natural Rubber Belt Cleaning Stick • Used to clean and extend the life of grinding belts • Especially useful before and after grinding aluminum • Size: 8" x 1-1/2"

Knife Sharpening Products • • • • • • •

6" Buffing/Sharpening Wheel 6" Felt Wheel with Groove Buffing Compounds 6" Cotton Wheel 6" and 8" Sisal Wheel 8" Muslin Wheel 6" Blending Wheel - Used for the initial sharpening of hoof knives and blending the edge of the knife blade.

• FootPro™ 6" Economy Wheel - New!

Sisal Wheel

Cotton Wheel

Blending Wheel

NEW!

FootPro™ 6" Economy Wheel

Hoof Finishing Products Hoof Buffer Attachment Replacement Sleeves (40, 60 and 100 grit) & Bladders

Abrasive Belts and Discs We offer a wide range of abrasive belts and discs specifically selected for the farrier’s use. VSM and 3M are the high quality brand names that we feature.

• Blue Zirconia - 2x36", 2x48", 6" & 10" Expander Wheels • Ceramic - 2x36", 2x48", 6" & 10" Expander Wheels • 3M - 6" & 10" Expander Wheels • 4-1/2" and 7" Flap Discs • 3M Cubitron - 2x36", 2x48", 10" Expander Wheels

3M Cubitron Belt

51

TUNGSTEN AND fpâ&#x201E;˘

TRACTION PRODUCTS Tungsten Pins

V-Trak Nails

Drive-In Studs

Drive-In Studs and Tungsten Carbide Pins For those situations when you need only enough traction to prevent sliding or slipping on hard surfaces, Tungsten Carbide Pins, Drive-In Studs and Vector V-Trak nails are very simple to apply.

Simply drill with a bit and seat the tapered shaft of the stud into the hole. Itâ&#x20AC;&#x2122;s amazing how much confidence your horses will gain when on blacktop or concrete. The studs should also give good traction for trail riding in terrain with large rocky footing. 50 pieces per pack.

As with the Drive-In Studs, you seat the tapered shaft of the pin into the hole. Holes may be drilled in toe or heel of the shoe.

Installation requires the use of a drill bit - included with every package of 100 pins.

Traction Nails

Vector V-Trak are available in sizes 4-1/2 Race, 5 City, 6 City and E-4 Slim.

Packed in 100 piece plastic boxes.

Liberty E-Slim non-slip tungsten nails are available in sizes E-3 Slim, E-4 Slim and E-5 Slim.

Countersink Drill Bit This German-made Countersink Drill Bit is receiving very positive comments from farriers who are using it. The overall length of the bit is 3-1/4". With the shorter bit there is less chance of breakage compared to longer bits. For use with a 3/8" tap. Excellent for both 8 mm and 10 mm shoes.

52

BLOOM FORGE

TOOLS

Roy Bloom is recognized throughout the industry for the attention to detail and performance of the products he manufactures. Tools made by Bloom Forge come to you ready to work in your application.

As a farrier, Roy understands the use of the tools. As a blacksmith, he understands the unique characteristics of the materials and stresses they endure in use. Bloom Forge offers the most extensive line of commercially available forging and shoeing tools in the North American market.

CROSS PEIN

ROUNDING HAMMER

Bloom Forge Hammers • Rounding Hammer (1-3/4, 2, 2-1/2 lb.)

• 1-3/4 Clipping Hammer

• Cross Pein Hammer (2 lb.)

• Replacement Hammer Handles

CITY FOREPUNCH

Bloom Forge Straight Tools • Long Pritchel • H-13 Pritchel • City Forepunch

• Small Bob Punch • Stud Punch (5/16" Round)

FIRE TONGS

Bloom Forge Tongs • Fire Tongs (1/4", 5/16", 3/8", 1/2") • Hot Fit Tongs

• Specialty Tongs (Rat Tail, Rose) • Replacement Tong Rivets

Bloom Forge Nail Layout T-Square • Used when forging handmade shoes to establish the location of the toe nail holes

53

BLOOM FORGE

TOOLS

CREASER DRIFT

REGULAR HEAD

CITY HEAD

Bloom Forge Steel Handle Tools • • • • • • • • • • • • •

City Forepunch Regular Head Forepunch E-Head Forepunch City Drift Small Bob Punch Large Bob Punch Creaser (Right & Left) Combo Cut (Right & Left) Foot Stand Combo Cut (Right) Clinch Undercut (Right & Left) Clinch Cutter (Right & Left) Clinch Block Forepunch Gauge

FOOT STAND COMBO CUT RIGHT

CREASER

STUD

HOT CUT

E-HEAD

Bloom Forge Wood Handle Tools • • • • • •

City Forepunch Regular Head Forepunch E-Head Forepunch City Drift Small Bob Punch Creaser

• • • • •

54

Creaser - Draft Center Punch Stud Punch (5/16" Round) Hot Cut Replacement Wood Handles

NORDIC FORGE

TOOLS

Nordic Forge Nordic has taken huge steps forward in manufacturing a high quality, mid-range price tool line under the â&#x20AC;&#x153;Viking" brand. The effort has been noticed throughout the world. They have a range of nippers, clinchers, hammers, and other farrier tools.

Nordic Nippers 12" 14" 14" 15"

Nipper (Polished & Semi-Polished) Nipper (Polished & Semi-Polished) Race Track Nipper (Polished & Semi-Polished) Nipper (Polished & Semi-Polished)

Nordic Clinchers Angled Clincher (Semi-Polished) Straight Clincher (Semi-Polished)

Nordic Hammers 10 oz. Driving Hammer 12 oz. Driving Hammer 14 oz. Driving Hammer 1-1/2 lb. Rounding Hammer 2 lb. Rounding Hammer

55

VETTEC AND HAWTHORNE

HOOFCARE PRODUCTS

Vettec Products Equi-Pak Equi-Pak CS Equi-Pak Soft Adhere Equi-Build Sil-Pak SoleGuard Super Fast

Hawthorne Products Pine Tar Venice Turpentine Ichthammol Liquid Sole Pak Sole Pak (Individual Patties, 4 & 8 lb. buckets)

Allen's Products

Blue Powder - A medicated thrush preventative, developed by farrier Todd Allen. The active ingredient is copper sulfate and the powder is sprinkled on the frog and sole area of the foot as a preventative measure. Also used as a treatment for thrush. 9 oz. bottles.

Super Mesh - A heavy-duty mesh material that can be used in conjunction with Vettec products. This mesh provides extra strength for times when the mesh offered by Vettec is not quite strong enough; for instance very rough terrain or larger feet. Each piece is approximately 7" x 6-1/2" and packed 6 pairs to a pack.

Welding Flux Iron Mountain - general use Red Mountain - brazing White Mountain - coal

56

EDUCATIONAL ITEMS Books Since its founding in 1990, FPD has actively engaged in providing programs and resources that encourage and promote educational excellence throughout the farrier industry. FPD is unique and progressive in their commitment to hoof care education for all farriers, veterinarians and others involved in the equine world.

Hoof Problems

by Rob van Nassau

The Principles of Horseshoeing III

by Dr. Doug Butler & Jacob Butler

The Complete Horseshoeing Guide

by Robert F. Wiseman

Hickmanâ&#x20AC;&#x2122;s Farriery

by John Hickman & Martin Humphrey

Horse Gaits, Balance & Movement

by Susan E. Harris

The Blacksmith: Ironworker & Farrier

by Aldren Watson

Understanding the Horseâ&#x20AC;&#x2122;s Feet

by John Stewart

Elements of Farrier Science

by Don Confield

Bloom Forge Book of Shoes Roy Bloom has produced a new version of the popular Book of Shoes. Including 150 shoe diagrams and forging specifications, the latest version is printed on a heavy, coated paper guaranteed to hold up well to the rigors of use in the field. Because it is bound in a three-ring binder, you can move through the book with ease.

57

HOT IRON PRODUCTIONS

EDUCATIONAL VIDEOS

Videos

(DVD ONLY)

Hot Iron Productions (HIP Inc.) was founded in the mid-90’s to produce high quality video footage for the farrier market. Roy Bloom CJF and Dave Farley CF were ahead of the curve in the industry, conducting clinics throughout the US and Canada, using video to help attendees get all the details that were a part of their presentations. Bloom and Farley have each been shoeing horses for over 40 years and are recognized among their peers as leading educators and craftsmen in the trade.

Balancing the Equine Hoof: Understanding the 12 Reference Points with Roy Bloom & Dave Farley Shoeing the Jumper with Roy Bloom & Dave Farley Fundamentals of Forging # 1 – The Hammer, Tongs & Anvil with Roy Bloom Fundamentals of Forging # 2 – Basic Shoemaking with Roy Bloom Fundamentals of Forging # 3 – Forge Welding Steel & Aluminum with Roy Bloom & Dave Farley Fundamentals of Forging # 4 – Cowpies & Clips with Roy Bloom & Dave Farley Tool Maintenance with Roy Bloom Basic Shoe Modifications with Roy Bloom & Dave Farley

58

HOOF PADS TEP Pads FPD is the exclusive distributor of Dura-Shock Pads. We offer a full range of flat, wedge and rim pads. We also distribute the Lily Pad. Once taped on for immediate emergency support it creates an instant heartbar effect without trauma to the foot.

• • • •

1/8" Flat Pad 5/32" Flat Pad 1/8" Rim Pad Lily Pad

• 3/16" Flat Pad • 11/32" Wedge Pad • 1/8" Double Rim Pad

Kerckhaert Snow Rim Pads Kerckhaert Snow Rim Pads in two different materials - rubber (black) and polyurethane (clear) - are now available. Each pair is in an individually wrapped package.

• • • •

Kerckhaert Kerckhaert Kerckhaert Kerckhaert

Rubber Snow Rim Pad - Large and Medium Front Rubber Snow Rim Pad - Large and Medium Hind Urethane Snow Rim Pad - Large and Medium Front Urethane Snow Rim Pad - Large and Medium Hind

59

HOOF PADS Castle Plastics We are pleased to be a distributor for Castle Plastics â&#x20AC;&#x201C; a leading manufacturer of hoof pads. Castle takes pride in the innovation and quality of products that they produce, including bar wedge pads, 2 and 3 degree oval pads, snow ball pads, impak pads, pour pads, and wedges with frog support.

60

ANATOMY OF A SMART TOOLBOX: VECTOR NAILS

LIBERTY NAILS

Kerckhaert

aluminum SHOES BLOOM FORGE TOOLS

FOOTPRO™ TOOLS

farrierproducts™ TOOLS

farrierproducts™ BARSHOES

Kerckhaert

STEEL SHOES

BELLOTA RASPS

RANGER HORSESHOES

PRODUCTS DESIGNED TO WORK WELL TOGETHER. While every product in the farrierproducts™ group has a unique purpose, they have been designed to provide optimum results when teamed together. Only the highest quality products are included in this group. We know, as a professional farrier, you won't settle for less.

HORSESHOES AND NAILS

TOOLS

To find a farrierproducts™ dealer near you and to view the full line of products available, visit www.farrierproducts.com, or call toll free at 1-800-468-2879.

JOIN THE CONVERSATION Like FPD on Facebook at www.facebook.com/FarrierProductDistribution Visit The HoofWall™ blog at www.farrierproducts.com/blog FPD Field Guide for Farriers at www.farrierproducts.com/fieldguide

Scan this code with your smart phone to learn more about FPD, Inc.

P.O. Box 1328 Shelbyville, KY 40066 1-800-468-2879 www.farrierproducts.com facebook.com/FarrierProductDistribution The HoofWall™ • www.farrierproducts.com/blog