www.hwk-skiwax.eu
LowFluor WAX
hwk skiwax app >> www.hwk-skiwax.eu <<
A1 allround is a universal paraffin wax for all types of snow. Use mainly for training, as well as racing under dry snow conditions. (Also for prep of new skis) (A1 all-round does not contain fluorine)
ÖSV-LF is a new service wax containing fluorine it is also suitable as a racing wax. Fulfils the highest demands of Alpine, as well as Nordic racing sports.
F1 is a proven wax containing fluorine. Suitable for training on moist to very wet snow.
Air temperature: +10°C to -10°C Humidity: all levels Ironing temperature: approx. 120°C
Air temperature: +10°C to -10°C Humidity: all levels Ironing temperature: approx. 120°C
Air temperature: +10°C to -2°C Humidity: all levels Ironing temperature: approx. 90°C
K1 is an optimal wax containing fluorine with a balanced composition especially for this temperature and varying types of snow. K1 is the most commonly used Alpine wax! K1 nero is therefore suitable for dirty and varying types of snow.
P1 is used for very cold and dry conditions and to build up freshly polished or new skis, which are intended for use in the cold.
Sp7 is a special wax for extremely cold and dry conditions. Super hard wax, also suitable for ski jumping.
P1 Nero is like P1, for extremely aggressive, transitioning, cold snow.
(Sp7 contains no fluorine)
Air temperature: +2°C to -8°C Humidity: all levels Ironing temperature: approx. 120°C
Air temperature: -4°C to -20°C Humidity: all levels Ironing temperature: approx. 140°C
Air temperature: -8°C to -30°C Humidity: all levels Ironing temperature: approx. 150°C
Polar Extreme for all dry new and artificial types of snow. Can also be used as a carburizing powder for the prevention of burning during Alpine skiing
Polar Extreme silver for all dry transitioning types of snow. Can also be used as a carburizing powder for the prevention of burning during Alpine skiing
Polar extreme does not contain fluorine!
Polar extreme silver does not contain fluorine!
Air temperature: -5°C to -30°C Humidity: dry Ironing temperature: approx. 150°C
Air temperature: -5°C to -30°C Humidity: dry Ironing temperature: approx. 150°C
HighFluor WAX hwk skiwax app >> www.hwk-skiwax.eu <<
HFW1 has a wide range of applications: coarsegrained snow, artificial snow, marble-like snow, in damp and wet snow.
HFW1 nero for dirty, transitioning moist to wet snow.
Particularly proven for Alpine runs. Air temperature: +10°C to -2°C Humidity: > 60% Ironing temperature: approx. 90°C
Air temperature: +10°C to -2°C Humidity: > 60% Ironing temperature: approx. 90°C
HFW2 is used for all transitioning snow conditions, especially for fine and coarse-grained old or artificial snow.
HFW2 nero for dirty, transitioning snow, from dry (humidity 50 to 70% as a race wax, otherwise as a base wax) to moist conditions.
Air temperature: +2°C to -6°C Humidity: > 60% Ironing temperature: approx. 120°C
Air temperature: +2°C to -6°C Humidity: > 60% Ironing temperature: approx. 120°C
HFW3 for all types of snow at an average humidity. Not suitable for very dry conditions. (Crackling snow)
HFW3 nero for transitioning snow. At a humidity of 50 to 70% as a race wax, otherwise as a base wax.
Air temperature: -4°C to -12°C Humidity: > 60% Ironing temperature: approx. 140°C
Air temperature: -4°C to -12°C Humidity: > 60% Ironing temperature: approx. 140°C
SpecialFluor WAX hwk skiwax app >> www.hwk-skiwax.eu <<
HWK-Fluorstick warm is used for all types of snow - from slightly frozen over to firm and wet snows, as well as sleet and wet new snow.
HG wet - excellent lubricating properties for fine grained, dirty, wet and smeary snow conditions.
VP 128 - for dirty, transitioning, grainy wet, moist and wet snow.
Air temperature: +15°C to -3°C Humidity: > 70% Ironing temperature: approx. 120°C
Air temperature: +15°C to +7°C Humidity: > 70% Ironing temperature: approx. 90°C
Air temperature: +8°C to -2°C Humidity: > 70% Ironing temperature: approx. 100°C
9Mo50 - for wet new snow to sleet, slushy to coarse-grained, frozen over snow.
50G 05 - coarse-grained, dirty old snow, low dirt absorption. Excellent lubricating properties during transition from dry to wet snow conditions.
Air temperature: +4°C to -4°C Humidity: > 70% Ironing temperature: approx. 120°C
Air temperature: +4°C to -4°C Humidity: > 70% Ironing temperature: approx. 120°C
HWK-Fluorstick cold is used for all types of snow in the minus temperature range at high humidity.
9Mo70 - transitioning types of snow at high humidity.
M-Silber Stick is ideal for short distances in all cold conditions. (Cork only)
Air temperature: -3°C to -15°C Humidity: > 70% Ironing temperature: approx. 120°C
Air temperature: -2°C to -8°C Humidity: > 70% Ironing temperature: approx. 120°C
Air temperature: -7°C to -20°C Humidity: > 70%
SpecialFluor-WAX
hwk skiwax app >> www.hwk-skiwax.eu <<
Fluorpowder warm Durable, abrasion-resistant fluorine powder for slightly frozen over to wet snow. Very good properties even during snowfall and sleet.
Fluorpowder extreme For all types of snow, independent of temperature.
Air temperature: +15°C to -4°C Humidity: > 70% Ironing temperature: approx. 165°C
Air temperature: independent of temp. Humidity: independent Ironing temperature: approx. 170°C
Fluorpowder middle 2010 For new snow and finely grained types snow at high humidity
Fluorpowder middle 2010 silver Best properties for all transitioning types of snow.
Neuschnee Fluorpowder For snowfall in dry areas and new snow at a humidity of 60% (Doser (measure metre for snow) 14% and higher).
Air temperature: 0°C to -8°C Humidity: > 60% Ironing temperature: approx. 145°C
Air temperature: 0°C to -8°C Humidity: > 60% Ironing temperature: approx. 145°C
Air temperature: -1°C to -20°C Humidity: > 60% Ironing temperature: approx. 145°C
Fluorpowder cold 2010 Optimal range for cold and dry new and artificial types of snow. (Fine grained!)
Fluorpowder cold 2010 silver Optimal range for cold and dry transitioning types of snow. (Coarse-grained old snow!)
Air temperature: -2°C to -16°C Humidity: > 60% Ironing temperature: approx. 155°C
Air temperature: -2°C to -16°C Humidity: > 60% Ironing temperature: approx. 155°C
Important! Wet (Doser 30% or higher) or dry snow (Doser 14% or less)
FluidFluor-WAX
hwk skiwax app >> www.hwk-skiwax.eu <<
Liquo racing For new, artificial and old snow. Very good properties even when snowing and at high humidity. (Doser (moisture metre for snow) 15% to 30%)
Liquo extreme For extremely dry snow (Doser (moisture metre for snow) 15% and less) or extremely wet snow or for sleet. (Doser (moisture metre for snow) 30% and more)
Air temperature: 0°C to -10°C Humidity: > 70% Ironing temperature:
Air temperature: independent of temp. Humidity: independent Ironing temperature:
FX1 A high fluorine paste for wet and changing snow conditions at high humidity, optimal durability.
KX1 A fluorine paste for various types of snow at an average humidity and in the specified temperature range.
Air temperature: +15°C to -2°C Humidity: > 70% Ironing temperature:
Air temperature: -2°C to -8°C Humidity: 50-70% Ironing temperature:
Waxing like a pro! Find all videos on www.hwk-skiwax.eu!
www.hwk-skiwax.eu