Selection 3 by Super Industrial Online

CPA Info #185

May 3, 2011

Implications of the 2011 FDA Food Safety Modernization Act on Direct Farm Marketers and Value-Added Producers Megan L. Bruch, Marketing Specialist, and Matthew D. Ernst, Independent Writer Center for Profitable Agriculture Disclaimer This publication is for educational purposes only and does not constitute legal advice nor is it intended to be a substitute for the services of a competent legal professional. Changes in legislation and regulations can be common. The implications summarized here reflect an understanding of the legislation at the time of this publication’s preparation. Additional details of this legislation will be forthcoming as regulations for the act are developed. Introduction The FDA Food Safety Modernization Act (FSMA) was signed into law on January 4, 2011 with the intent to modernize an outdated U.S. food safety system and issue a call for the government to improve its ability to decrease food-borne illness outbreaks. It pursues a food safety system that “is based on science and addresses hazards from farm to table.” i The law provides the Food and Drug Administration (FDA) and the Secretary of Health and Human Services greater regulatory authority. ii The FSMA will likely impact all players in the U.S. food industry, including farmers who market directly to consumers and value-added agriculture producers in various ways. This fact sheet provides a brief overview of some major points of the FSMA and their potential implications for direct farm marketers and value-added agriculture producers as understood based on information available at the time of publication. A complete understanding of implications of the law is not known at this time. There are still steps that must be taken within the FDA before the FSMA can or will be implemented. Forthcoming regulations from the FDA will determine the specific guidelines by which food industry players will be required to meet the mandates of this new legislation. These regulations will be issued within two years after the act’s passage, with some being issued in as soon as 180 days from passage. After the regulations are 1

written, there will be an additional period of time for food businesses to reach compliance. iii Another area of uncertainty for the FSMA is the current U.S. federal budget situation. As of this publication, the budget for fiscal year 2011, including funding of the FSMA, was still being negotiated by Congress. Regulations are often developed through a rulemaking process called “notice and comment.” This process allows for those stakeholders, including producers, who could be directly affected by a law to participate in public hearings and submit written comments relating to the law’s final regulations. Information and news about the comment period and public hearings may be obtained by monitoring the related FDA websites listed below.

The FDA maintains a website dedicated to the FSMA at http://www.fda.gov/Food/FoodSafety/FSMA/default.htm The full text of the act is available at http://www.gpo.gov/fdsys/pkg/PLAW-111publ353/pdf/PLAW-111publ353.pdf

Some Major Points of the FSMA and Implications for Direct Farm Marketers and Value-Added Agriculture Producers Direct farm marketers and value-added agriculture entrepreneurs are involved in the production, handling and distribution of food, and could thus be subject to the FSMA. This is largely due to these producers selling raw produce and/or food intended for consumption. With some exceptions, such as imported foods and seafood, the FSMA is not anticipated to have significant, direct effects on producers of commodity crops and meat animals for live sale. 1. Who will be affected by FSMA? Most players in the U.S. food industry, including food manufacturers, processors and retailers, will be affected by the Food Safety Modernization Act. The act includes language that: • • • •

Establishes mandatory preventive controls for food facilities and mandatory produce safety standards determined by science-based methodology iv Addresses food safety issues for imported foods Increases the authority of the FDA to regulate food safety Improves collaboration across various government agencies for regulating and responding to food safety issues

Potential Implications for Farms and Direct Farm Marketers Under the FSMA, food facilities (including some farms) could be subject to requirements to evaluate food safety hazards, implement and monitor possible sources of contamination, and establish a plan for corrective action. v The act also gives the FDA the authority to: 2

• •

Establish standards regulating the safe production and harvest of fruits and vegetables Inspect food facilities for compliance to new regulations

“Food facilities” are referred within the act as those facilities manufacturing, processing, packing, receiving or holding food. vi Although this definition could apply to many direct farm marketers, such as those manufacturing food products in on-farm kitchens, the language of the act also exempts many such producers from fulfilling the requirements of the act. It is currently unclear how rigorously this definition of food facilities will be applied to farms that may not meet the exception language. 2. Who may be exempted? The FSMA provides for some exemptions to its requirements, including exemptions for some fruit and vegetable growers and value-added producers. Fruit and Vegetable Growers The Tester Amendment of the FSMA contains an “Exemption for Direct Farm Marketing” of produce crops. vii Farms growing fruits and vegetables may be exempted from the FSMA if the farm meets each of these two conditions: 1. The majority of the farm’s entire income from food over a three-year period comes from direct marketing activities to qualified end-users; and 2. The average monetary value of all food sold is less than $500,000 annually “Qualified end-users” are defined as: 1. The food consumer, OR 2. A restaurant or retail food establishment that is a. Located in the same state, or within 275 miles, of the farm or food facility and b. Purchasing food for direct sale to the consumer Value-Added Producers “Value-added” producers are those who change or transform their farm products into a more valuable state. When applied to food crops, many value-added activities can result in producers operating a “food facility” that could fall under the regulation of the FDA as the result of the FSMA. However, there are also exemptions in the act that will apply to some value-added producers. These include: •

•

Facilities that are already in compliance with a HACCP (Hazard Analysis Critical Control Points) program. Facilities operating with a HACCP program often include those making juice/cider, lowacid foods and seafood products. Firms that are “Very Small Businesses.” The act specifies that small entities will be defined by the FDA within 180 days of the signing of the FSMA.

•

A firm meeting the “Limited Annual Monetary Value of Sales.” Similar to the exemption language for fruit and vegetable growers, this exemption stipulates that the average annual sales during a three-year period prior to the calendar year must be: o greater for direct-marketed food products than for wholesale food products, and o less than $500,000

Value-added producers who are “exempt” must still meet some minimum requirements of the act. Refer to question 4, “What will the FSMA require?” for details. 3. Who will not be exempted? All fruit and vegetable farms and value-added producers failing to meet the exemptions of the FSMA will be responsible for meeting the requirements of the law. Two examples of operations that apparently will not meet the exemption language are: 1. Farms generating over $500,000 in annual income from food (by definition, this includes animal food) 2. Farms selling produce to wholesale intermediaries (brokers, produce auctions, etc.) This would seem to indicate that a farm selling more than $500,000 in food crops (including row crops such as corn, soybeans and wheat) that is also direct marketing produce would be need to follow the requirements of the FSMA. Produce auctions, or other wholesale intermediaries, also appear to fail to meet the requirements of a “qualified end user.” Farms selling to such wholesale markets will apparently be required to meet the stipulations of the FSMA. 4. What will the FSMA require? The FSMA will require food producers and/or manufacturers to develop food safety plans and provide written documentation of all potential hazards in their farms and/or facilities. These requirements include, but are not limited, to: • • • • • •

Developing a written analysis of safety hazards in a food facility Identifying and implementing critical controls as defined by FDA Monitoring the food safety plan’s effectiveness Undertaking corrective actions in cases of safety failures Verifying that these measures have been taken through inspections including independent audits and/or testing by accredited laboratories Maintaining written records of all safety for a two-year period

The forthcoming regulations will provide specific guidelines for how all written records should be prepared. Recordkeeping requirements will be phased in over a period of time to ease the transition burden on food producers with special attention given to ease the burden on small food producers and 4

manufacturers. A specific compliance manual for small businesses will be made available six months after the FDA issues a final rule for recordkeeping requirements. Requirements for “Exempt” Value-Added Producers Although the FSMA language appears to exempt many value-added producers, those exempted producers must still provide one of two sets of documentation. Value-added producers must provide either: viii • •

Documents verifying that the facility is in compliance with all State, local, country, or other nonFederal food safety laws, OR Written documentation demonstrating that the “owner, operator, or agent in charge of the facility has identified potential hazards associated with the food being produced, is implementing preventive controls to address the hazards, and is monitoring the preventive controls to ensure that such controls are effective” ix

Furthermore, the manufacturer/producer is required to provide an adequate label (including the name and business address where the food was manufactured and processed). x Current Recommendations for Direct Farm Marketers Regulations will be published within the next two years that will stipulate exactly how the FSMA will affect farm marketers, value-added producers and others in the food industry. Some producers may decide to participate in the public notice and comment rulemaking process that occurs as the FSMA regulations are written. All producers may start proactive management decisions in preparation for the phase-in of this legislation. These decisions may include the following: 1.

Review Operation’s Current Regulatory Compliance Direct marketers and value-added producers are already subject to a range of licensing and regulatory requirements from local and state agencies. Producers should periodically review existing licenses to ensure that they continue to meet local and state requirements for their enterprise. Submission of such licenses and other documentation will apparently be required for exempted firms under the FSMA.

2. Incorporate Management Practices with Food Safety in Mind All firms, including those meeting the exceptions of the legislation, should always keep food safety in the forefront as they make management, production and handling decisions. These decisions can help protect consumers from unsafe food and producers from potential liability. 3. Firms at Upper End of Sales Thresholds May Consider Compliance A farm or food manufacturer whose business levels may currently be exempted under the various $500,000 thresholds, but whose sales are growing, may wish to develop or begin developing the written documentation required by the FSMA. This could prove especially useful should the business grow to exceed the income threshold for exemption. 5

Summary The Food Safety and Modernization Act (FSMA) is far-reaching legislation that will impact all stakeholders, including producers, in the U.S. food industry. Although certain parts of the act may exempt some direct farm marketers and value-added producers from meeting the act’s requirements, the exact effects upon farms remain unknown until the regulations are written and the legislation is phased in when and if implementation is funded in the federal budget. In the meantime, producers should remain diligent about using practices that promote food safety while monitoring the ongoing developments of this legislation. Additional Resources The resources listed below provide additional information about the FSMA and food safety. The FDA websites provide information directly from the government about the FSMA and forthcoming regulations. Other websites provide information about food safety for producers from respected sources. Producers should always verify that guidelines or recommendations are appropriate for their situation and local regulatory environment. Complete Text of Food Safety Modernization Act http://www.fda.gov/Food/FoodSafety/FSMA/default.htm FDA Food Safety FSMA Website http://www.fda.gov/Food/FoodSafety/FSMA/default.htm. The Ohio State University Produce Safety http://www.producesafety.osu.edu/ Iowa State Food Safety Website http://www.extension.iastate.edu/foodsafety/

“Food Bill Aims to Improve Safety.” FDA Consumer Health Information / U.S. Food and Drug Administration. http://www.fda.gov/downloads/ForConsumers/ConsumerUpdates/UCM238166.pdf, p. 1. Viewed March 7, 2011. ii th FDA Food Safety Modernization Act, Public Law 111-353, H.R. Res. 2751, 111 Cong. (January 4, 2011). Viewed March 7, 2011 at http://www.gpo.gov/fdsys/pkg/PLAW-111publ353/pdf/PLAW-111publ353.pdf. iii FDA Food Safety Modernization Act, “Flexibility for Small Businesses,” 204(i), 124 STAT. 3937. iv FDA, http://www.fda.gov/Food/FoodSafety/FSMA/ucm239907.htm, “Prevention.” Viewed April 30, 2011. v FDA, http://www.fda.gov/Food/FoodSafety/FSMA/ucm237934.htm. vi FDA Food Safety Modernization Act, “Registration of Food Facilities,” Sec. 102, 124 STAT. 3887. vii FDA Food Safety Modernization Act, “Standards for Produce Safety,” Sec. 419, 124 STAT. 3903. viii FDA Food Safety Modernization Act, “Hazard Analysis and Risk Based Preventative Controls,” Sec. 418(l)(2), 124 STAT. 3892. ix FDA Food Safety Modernization Act, Sec. 418(l)(2)(B)(i), 124 STAT. 3893.

Super Industrial On the web at www.edanaro.com www.superindustrialonline.com Call 678 221 4162

Wide Selection of Fasteners & Hardware Available In Inch/Imperial & Metric Sizes, Made In USA & Import, Small Pack & Bulk Pack

Popular Items & Brands In Stock

Helping Equip Your Business A Million Different Ways Over 1 Million Products Available Online

Grade Markings For Steel Bolts & Screws Mechanical Requirements Grade Designation

ASTM A307 Gr. A

Nominal Size of Product in.

1/4 to 4

SAE Gr. 1

1/4 to 1-1/2

SAE Gr. 2

1/4 to 3/4

SAE Gr. 5

1/4 to 1 1-1/8 to 1-1/2

ASTM A449 Type 1

1/4 to 1 1-1/8 to 1-1/2 1-3/4 to 3

ASTM A325 Type 1

1/2 to 1 1-1/8 to 1-1/2

SAE Gr. 5.2

1/4 to 1

ASTM A449 Type 2

1/4 to 1

SAE Gr. 8

ASTM A354 Gr. BD

Proof Load Stress ksi

Yield Strength ksi Min

Tensile Strength ksi Min

––

1/2 to 1 1-1/8 to 1-1/2

2-3/4 to 4

Core Max

––

B69

B100

307A

––

60 min 100 max

––

B69

B95

307B

––

B70

B100

None specified

––

B80

B100

None specified

85 74

92 81

120 105

30N54 30N50

C25 C19

C34 C30

92 81 58

120 105 90

––

C25 C19 B91

C34 C30 B100

85 74

92 81

120 105

––

C24 C19

C35 C31

low carbon boron steel; the product is quenched and tempered

120

30N56

C26

C36

120

––

C25

C34

atmospheric corrosion resistant steel; the product is quenched and tempered

120

––

C24

C35

105

––

C19

C31

120

130

150

30N58.6

C33

C39

120

130

150

––

C33

C39

105

115

140

––

C31

C38

120

130

150 min 170 max

––

C33

C38

low or medium carbon steel

low of medium carbon steel, cold worked

medium carbon steel; the product is quenched and tempered

medium carbon alloy steel; the product is quenched and tempered

74 55

ASTM A490 Type 1

1/2 to 1-1/2

SAE Gr. 8.2

1/4 to 1

low carbon boron steel; the product is quenched and tempered

120

130

150

30N58.6

C33

C39

ASTM A490 Type 3

1/2 to 1-1/2

atmospheric corrosion resistant steel; the product is quenched and tempered

120

130

150 min 170 max

––

C33

C38

140

––

180

––

C39

C45

135

––

170

––

C37

CC45

ASTM A574

0.060 to 1/2 Over 1/2

Grade Identification Marking

Min

1/4 to 1-1/2

1/4 to 2-1/2

Product, Hardness, Rockwell Surface Max

1/4 to 4

ASTM A307 Gr. B

ASTM A325 Type 3

Material and Treatment

fine grain alloy steel product is quenched and tempered

A325

BD A490

A490

None Specified

Information presented is for general reference and informational purposes only. Information presented is believed to be accurate at the time of document creation. However Global Industrial is not responsible for any claim traceable to any errors (typo or otherwise) as contained herein. Global Industrial makes no warranties as to the accuracy of this information found in public circulation.

Super Industrial On the web at www.edanaro.com www.superindustrialonline.com Call 678 221 4162

ANCHORS

BOLTS

SCREWS

NUTS

Adhesive Anchors Drive Anchors Drop In Anchors Expansion Anchors Machine Screw Anchors Nail Anchors Plastic Anchors Pre-Expanded Anchors Roofing Anchors Screw Anchors Sleeve Anchors Split Drive Anchors T-Anchors Toggle Anchors Wall Anchors Wedge Anchors

Carriage Bolts Elevator Bolts Eye Bolts Flange Bolts Hanger Bolts Hex Bolts & Cap Screws & Square Head Bolts Plow Bolts Step Bolts Structural Bolts T-Slot Bolts Tap Bolts

Cap Screws Deck Screws Dowel Screws Drywall Screws Floorboard Screws Lag Screws Machine Screws Self Drilling Screws Self Piercing Screws Self Tapping Screws SEMS Screws Tamper Resistant Screws/ Security Screws Thread Cutting Screws Thread Forming/Rolling Screws Thumb Screws U-Drive Screws Weld Screws Wing Screws Wood Screws

Acorn Nuts / Cap Nuts Cage Nuts Castle Nuts Conduit & Panel Nuts Eye Nuts Flat Head Nuts Hex Nuts Lock Nuts Pipe Plugs Self Clinching Nuts Square Nuts Stover Equivalent Lock Nuts Tamper Resistant Nuts/ Security Nuts Tee Nuts Type J Steel Spring Nuts Type U Steel Spring Nuts U Clips Wheel Nuts Wing Nuts

THREADED INSERTS

MACHINERY HARDWARE

Brass Finserts Coil Thread Repair Kits Concrete Inserts Drive Tools for Threaded Inserts Helical Threaded Inserts Press Inserts Screw Threaded Inserts Thread Repair Kits Threaded Insert Kits Threaded Inserts For Metal - Carbon Steel Threaded Inserts For Metal - Stainless Steel Threaded Inserts For Wood Ultrasonic Straight & Tapered Threaded Inserts

Adjustable Levers Cam Units and Levers Control Levers Grippers Handwheels Hoist Rings Indexing, Spring, & Ball Plungers Knobs & Handles Leveling & Toggle Pads Magnets Pull Handles Screws & Bolts Toggle Shoe Clamps

MILITARY FASTENERS

Phillips Flat Head Military Fasteners Military Hex Head Cap & Machine Screws Military Washers Phillips Pan Head Military Fasteners Military Socket Head Cap Screws

HI LOWS

Flat Head Flat Undercut Head Indented Hex Washer Pan Head Truss Head

RETAINING RINGS

E Rings External & Internal Retaining Rings

ROD ENDS

SHIMS

Blank Rod Ends Machined & Black Oxided Rod Ends Machined - Stainless Steel Rod Ends

Arbor Shims & Spacers Die Button Shims Slotted Shims Standard Shims

Super Industrial On the web at www.edanaro.com www.superindustrialonline.com Call 678 221 4162

SOCKET SCREWS

WASHERS

Button Head Socket Cap Screws Cone Point Socket Set Screws Cup Point Socket Set Screws Flat Head Socket Cap Screws Flat Point Socket Set Screws Half Dog Point Socket Set Screws Low Head Socket Cap Screws Oval Point Socket Set Screws Socket Head Cap Screws Socket Head Shoulder Screws Socket Pipe Plugs

Countersunk Finishing Washers Dock Washers Fender Washers Flat Washers Lock Washers Machine Screw Washers Shoulder Washers Nylon Split Lock Washers Spring Washers Square Beveled Washers Structural Washers

VIBRATION ISOLATION

PANEL FASTENERS

Retractable Captive Panel Fastener Press In Style Retractable Captive Panel Fastener Flare In Style

FASTENER KITS & ASSORTMENTS

Blind Rivets Drive Rivets Rivet Kits Rivet Tools & Parts Structural Rivets

Anchor Kits Bolt Kits Bushing Kits Screw Kits Nut & Washer Kits Pin Kits Retaining Ring Kits Rivet Kits Thread Repair Kits Threaded Rod Kits Washer Kits Woodruff Key Kits

PINS

NAILS & STAPLES

Cotter Pins Dowel Pins Hitch Pin Clips Spring Pins Slotted

Steel Staples Stainless Steel Staples Straight Finish Nails Straight Finish Brads

RIVETS

SPRINGS

Compression Springs Extension Springs

Compression & Shear Mounts Hanger Mounts Machine Leveling Mounts Spring Floor Mounts Vibration Pads

VENDOR LISTING Blue-Jay Fasteners Brighton Best International Buckeye Fasteners Chrislynn Threaded Inserts Earnest E-Z Lok G.L. Huyett Gardner Spring, Inc. Greenlee Holo-Krome ITW Brands J.W. Winco, Inc. Kanebridge Ken Forging Mason Industries MKT Fastening Nord-Lock

Nova Fasteners Nucor Precision Brand Peerless Hardware Powers Fasteners Prebena PrimeSource Building Products Prospect Fastener Screw Products Star Stainless Screw Co. Tamper Proof Screw Co. Tamper Pruf Screws The Stanlok Group Titan Fastener Products, Inc. Unbrako Wej-it And Many More...

Super Industrial On the web at www.edanaro.com www.superindustrialonline.com Call 678 221 4162

HYDRAULIC FORK-MOUNT DRUM LIFT - HYDRA GRIP

MATERIAL HANDLING

• Functions: Clamp, Rotate • Rotation: 360 • Includes: pressure gauge, battery gauge, battery pack, charger, hour meter, clock

Sku: B1300752

$00.00 > DIRECT SHIP

DESCRIPTION: All functions of the VALLEY CRAFT Hydraulic Fork-Mount Drum Lift are fully hydraulic for smooth, precise operation. Infinitely variable speed ensures complete control of the load. Jaws automatically adjust to fit 18-28" dia. drums. Ergonomic hand-held pendant control allows operator to remain seated. 6-1/2 x2-1/2" fork pockets, 19-3/8" between forks. Equipped with 12V battery operated Power-Pak that includes (2) 12-volt deep-cycle batteries and built-in battery charger. Also includes: system pressure gauge and battery gauge.

MORE PRODUCTS

Ezy-Rol 4-Wheel Drum Trucks

Vari-Tuff High-Capacity 48"W Bin Cabinet

Steel Hopper Truck

Heavy-Duty Powered Hand Truck

Super Industrial On the web at www.edanaro.com www.sup Call 678 221 4162

Super Industrial On the web at www.edanaro.com www.superindustrialonline.com Call 678 221 4162

Super Industrial On the web at www.edanaro.com www.sup Super Industrial On the web at www.edanaro.com www.superindustrialonline.com Call Call 678678 221 4162221 4162

OFFICE LADDERS Built with 100% square tube framework for a clean look, Office Ladders come in four standard colors to match your office decor. 300 lbs capacity. Rigid 1” square tubing. Spring loaded 3” casters provide mobility while rubber tipped legs add traction while in use. 16” and 24” wide steps available. Steps are 7” deep with deeper 14” top step. Solid treads covered with nonslip adhesive runner. Meets OSHA standards. Item B1893231

Item B2144624

Model

# of Steps Platform Height

B2144625

B2144624

B1893231

B1893196

B2144626

B2124098 5

20”

30”

40”

50”

Platform Width

17”

Platform Depth

14”

O/A Height

44”

30”

54”

64”

80”

O/A Width

22”

23”

O/A Length

23”

27”

36”

50”

Assembled

Brand

EGA Products

Capacity

450 lbs

Color Finish

Gray

Almond

Gray

Black

Almond

Construction

Steel

Incline Angle

60°

Super Industrial On the web at www.edanaro.com www.superindustrialonline.com Call 678 221 4162

$00.00

Super Industrial On the web at www.edanaro.com www.sup Super Industrial On the web at Call www.edanaro.com www.superindustrialonline.com 678 221 4162 Call 678 221 4162

Super Industrial On the web at www.edanaro.com www.sup Super Industrial On the web at www.edanaro.com www.superindustrialonline.com Call 678 Call 678 221 4162 221 4162

$00.00

Super Industrial On the web at www.edanaro.com www.sup Super678 Industrial Call 221 4162 On the web at www.edanaro.com www.superindustrialonline.com Call 678 221 4162

Super Industrial On the web at www.edanaro.com www.superindustrialonline.co Super Industrial Call 678 221 4162 On the web at www.edanaro.com www.superindustrialonline.com Call 678 221 4162

COMMERCIAL AIR CIRCULATOR NON-OSCILLATING FAN HEAD

HVAC/R & FANS

• Two Speeds • Air Flow CFM: 8200/6200 • Motor HP: 1/3 • Fan Diameter: 30" • Mount Type: Non-Oscillating Pedestal-Mount Sku: 795712 These quality fans include an enclosed permanently lubricated, PSC-type ball bearing singlephase motor for long life and optimum performance. 3 quiet aluminum blades are enclosed in double locking steel wire guards for safety. Pivot-action fan head allows vertical tilt angle adjustments. Meets OSHA standards, UL listed. Replace or upgrade fan heads with industrial quality air circulator heads. Includes 12'L SJT type, 3-conductor power cord. 120V. Horsepower rating based upon maximum speed/load.

PEDESTAL FAN MOUNT

• 52–82"H Adjustable Center Height • 27" Dia. Steel Base Sku: 795965 Combine with Replacement Fan Heads to create your own fans or replaces old, worn out or broken fan mounts. Made with durable steel. Allows easily installation to non-oscillating fan heads. Pedestal Mounts allow installation of oscillating fan heads. Cannot install mount to fans with Yellow Powder Coat Finish. UL listed.

MORE PRODUCTS

Workstation Fan

Dock Lights

Ceiling Fans

Belt Drive Blower

Super Industrial On the web at www.edanaro.com www.sup Super Industrial On the web at www.edanaro.com www.superindustrialonline.com Call 678 221 4162 Call 678 221 4162

Super Industrial On the web at www.edanaro.com www.superindu Super Industrial Call 678 221 4162 On the web at www.edanaro.com www.superindustrialonline.com Call 678 221 4162

$00.00

Super Industrial On the web at www.edanaro.com www.sup Super Industrial On the webCall at www.edanaro.com www.superindustrialonline.com 678 221 4162 Call 678 221 4162

Super Industrial On the webSuper atIndustrial www.edanaro.com www.sup On the web at www.edanaro.com www.superindustrialonline.com Call 678 221 4162 Call 678 221 4162

VERTICAL LADDERS NOW AVAILABLE THRU EGA

Side Step B2196912

High Access Caged Ladders B2196915

Walk-Thru B2196946

Corrosion Resistant Aluminum B2196942

Vertical Wall Mount B2196936

Super Industrial Super Industrial On the web at www.edanaro.com www.superindustrialonline.com On the web at www.edanaro.com www.superindustrialonline. Call 678 221 4162 Call 678 221 4162

MOBILE WORK PLATFORMS Platforms provide a secure movable work space at a variety of heights above floor level. 800 lbs capacity. Rigid 1” square tubing. 4” rear casters provide mobility and rubber tipped legs add traction while in use. Steps are 7” deep. Perforated or Grip Strut Tread for slip-resistant footing. Meets OSHA standards.

ALUMINUM WORK PLATFORMS Lightweight platform provides a stable and solid work surface that is both weather and corrosion resistant. 300 lbs Item B1893215 capacity. Rigid 1” square tubing. 4” rear tilt-back casters provide mobility and rubber tipped legs add traction while in use. Solid ribbed extruded step or Grip Strut Tread for slip-resistant footing. Meets OSHA standards. Item B1893213

Aluminum Models

Model

B2131362

B1893212

B2131641

B1893213

B1893215

B2131518

# of Steps

Tread Type

Perforated

Grip-Strut

Perforated

Ribbed

Platform Height

30”

40”

50”

20”

30”

20”

Platform Width

30”

24”

30”

24”

Platform Depth

35”

49”

35”

42”

35”

O/A Height

30”

40”

82”

20”

30”

52”

O/A Width

32”

27”

32”

27”

O/A Length

50”

49”

69”

61”

47”

60”

47”

Assembled

Brand

EGA Products

Capacity

800lbs

300lbs

Color Finish

Gray

Mill

Construction

Steel

Aluminum

Incline Angle

Hand Rails

EGA Products EGA Products EGA Products

B1893217

EGA Products EGA Products 300lbs

Super Industrial On the web at www.edanaro.com www.superindustrialonline.com Call 678 221 4162

TRUCK/DOCK LADDER Truck/Dock Ladders with 50-Degree Safety Angle are designed to promote safety and productivity. 50-degree ladder angle enables user to turn and descend facing forward while carrying bulky load. The large platform and each step feature serrated tread for slipresistant footing. Removable back and side chain enable front or side loading from trailer. Large rear wheels roll smoothly over rough terrain. Meets OSHA Standards.

Item B1893202

Model

# of Steps Platform Height

B1893200

B1893201

B1893202

B1893199

B1893206

B1893203 6

40”

50”

60”

Platform Width

36”

Platform Depth

48”

O/A Height

70”

80”

90”

O/A Width

46”

O/A Length

77”

86”

94”

Assembled

Unassembled

Assembled

Unassembled

Assembled

Brand

EGA Products

Capacity

800 lbs.

Color Finish

Blue

Construction

Steel

Incline Angle

50°

Super Industrial On the web at www.edanaro.com www.superindustrialonline.com Call 678 221 4162

$00.00

Super Industrial On the web at www.edanaro.com www.sup Super Industrial 678 221 4162 On the web atCall www.edanaro.com www.superindustrialonline.com Call 678 221 4162

Super Industrial On the web at www.edanaro.com www.sup Call 678 221 4162 Super Industrial On the web at www.edanaro.com www.superindustrialonline.com Call 678 221 4162

Super Industrial On the webSuperatIndustrial www.edanaro.com www.sup On the web at www.edanaro.com www.superindustrialonline.com Call 678 221 4162 Call 678 221 4162

Loading Dock Essentials Keep your loading dock area running smoothly OUTSIDE THE DOCK SELF-STORING DOCK ACCESS

o Model No. 986635

Edge of Dock Leveler

SECURE THE TRAILER

o Model No. 132050

Trailer Stabilizer Jack

SEAL THE DOCK

o Model No. 251916 Rigid Dock Door Shelter

RAISE THE TRAILER

o Model No. 247360

Aluminum Wheel Riser

SAFE GUARD THE TRAILER

o Model No. 241741

Rubber Wheel Chock

INSIDE THE TRUCK

SECURE THE LOAD

ACCESS THE LOAD

Folding Cargo Bar

Pallet & Skid Puller

o Model No. 241300

o Model No. 132600

BRIDGE THE DOCK BAY

o Model No. 241742

Aluminum Dock Plate

Super Industrial On the web at www.edanaro.com www.superindustrialonline.com Call 678 221 4162

$00.00

Super Industrial On the web at www.edanaro.com www.sup Super Industrial On the web at www.edanaro.com Call 678 www.superindustrialonline.com 221 4162 Call 678 221 4162

Super Industrial On the web at www.edanaro.com www.sup Super Industrial Call 678 www.superindustrialonline.com 221 4162 On the web at www.edanaro.com Call 678 221 4162

Super Industrial On the webSuper atIndustrial www.edanaro.com www.sup On the web at www.edanaro.com www.superindustrialonline.com Call 678 221 4162 Call 678 221 4162

Super Industrial On the web at www.edanaro.com www.superindustrialonline.com Call 678 221 4162

Welcome to how work gets done. For 50 years Safco has built office product solutions for every work environment to help get work done and make the workday easier. That’s why we offer a wide range of products that can be used together to create the optimal work area that supports the work that goes on day in and day out.

ZENERGY™ BALL CHAIR

EVOS™ SERIES WASTE RECEPTACLES • Steel frame with perforated galvanized steel panels • Durable for indoor or outdoor needs • No assembly required • Includes rigid plastic liner • 15 gallon capacities

• Anti-burst 17½” exercise ball covered in mesh • Fully inflated seat height is 23”, height will lower when occupied • May help support better posture and balance • Four powder coated legs and stationary glides for stability • Pump included • Designed by Thomas Walser • Assembly required

PART NO. WBB1318374

PART NO. WBB1022186

ONYX™ WHITE MESH DESK ORGANIZER

POWERED ONYX™ ORGANIZER

• Six 2” wide vertical sections • Two horizontal letter-size trays • Steel mesh design • Durable, powder coat finish

• USB port • Three drawers • One horizontal letter tray • One vertical section

PART NO. 3255WH

PART NO. 3234BL

TASK MASTER ® ADJUSTABLE FOOTREST • May relieve pressure points in workers who stand most of the day • Nine positions and height range of 5½” to 15” • Textured, anti-slip platform that mounts at 8° angle • Heavy gauge black tubular steel construction • Locks together easily with button tabs • Assembly required

PART NO. WBB900102

Super Industrial On the web at www.edanaro.com www.sup Super Industrial On the web at www.edanaro.com www.superindustrialonline.com Call 678 Call 678 221 4162 221 4162

$00.00

Super Industrial On the web at www.edanaro.com www.sup Call 678 221 4162

Super Industrial On the web at www.edanaro.com www.superindustrialonline.com Call 678 221 4162