DEVICE DESCRIPTION

Fig.1 General view - Crocodile fork and manure fork

The hydraulic driven fork is adapted to work with a vehicle which has power hydraulic system as a standard of the rear and front fastenings used in agricultural vehicles.

Basic tool fastening systems used in the case of forks are as follows:

• TUZ I, TUZ II, TUZ III, TUZ IV Hitch types

•  EURO hitch type

•  SMS type coupling

Crocodile fork is built of two articulated main construction elements. The first element – fork frame is made of thick steel plate made by laser cut method, bent, welded to form a stiff frame – box with forged teeth assembled. The second element – jaw is a movable part of the fork. It is made of steel elements welded together with forged teeth. In upper part It is connected to the fork frame with articulated joint and on the rear - to hydraulic actuators.

The hydraulic system which after being connected to the vehicle is controlled from the operator's cabin allows for smooth work of the jaw in the range of 60˚.

The jaws built in the fork have special construction due to which may be easy adapted to different fodders transported with the use of the fork. Well fitted teeth enable to increase the amount of transported materials (by clamping) and secure protection during transport.

Equipment and accessories

Basic

The basic equipment of the bucket consists of:

• Hydraulic control system with power hydraulic system piping and hoses

• Instruction Manual

• Warranty card

Hand-held warning-lighting device and triangle marking plate for slow-moving vehicles do not belong to the basic equipment of the bucket. You can buy them at the manufacturer and in the agricultural machines depot for additional cost. Every user of the bucket should have a warning-lighting device in good working order and a triangle marking plate for slow-moving vehicles. Ignoring their use during transport and work can result in accident. The machine user is responsible for damages resulting from an accident.

Auxiliary

• 1. Linch pin, cotter pin, clip ø 10.5

• 2. Central coupler to tractor

Note:

ALL ELEMENTS OF AUXILIARY EQUIPMENT OF THE BUCKET MAY BE BOUGHT AT THE MANUFACTURER FOR AN ADDITIONAL COST.