WARNINGS • Take EXTREME CARE when connecting the bale feeder to the three-point linkage of a tractor or carrier frame of a telehandler. Ensure the tractor/telehandler handbrake is applied before leaving the cab. • The main frame MUST be correctly latched onto the three-point linkage frame before lifting the bale feeder off the ground. • ALL persons and animals must be keep WELL CLEAR of the machine in operation and when traveling. • Shut off the tractor BEFORE trying to clear feed material or cut strings/ net from anywhere around the machine. • Watch CAREFULL when driving for over-width and tail-swing when travelling through gateways or near objects or people. • When feeder is not being used, ensure children CANNOT play on or near the machine. • BEFORE attempting maintenance or any work, ensure the tractor engine is shut off and no one is near the hydraulic controls. • DO NOT allow any person(s) to ride on the machine at ANY time. • Take EXTREME CARE when lifting the feeder on a front loader, telehandler or skid steer loader as this changes the balance point and could tip the vehicle over. • NO alteration or modification is to be done on this machine unless undertaken by Hustler or its authorised dealer. This will void the warranty. • Vehicle MUST be operated at low speed when bale feeder is attached. Must be kept low the ground when traveling on a front loader or telehandler. • DO NOT use for transporting anything other than a bale
4
