MAINTENANCE (also do this before initial operation) • • • • • • • • • •
•
•
6
Grease all points regularly. These are: 4x main shaft bearings (do not over grease). 2x drive couplings All friction surfaces of mechanical latch mechanism Inside the hook latch contact surface Keep the 2 drive chains oiled. Use non-tacky black or brown chain lube monthly. After the first 10 hours of operation check all bolts and grub screws are tight. During routine servicing check that the grub screws and bolts are tight. Ensure the chain tension is checked regular. It can be tightened by adjusting the four tensioners evenly. See adjustments section for more Check the linkage mounting bolts are tight at all times. Depending on the mounting bracket this may be three point linkage brackets or loader /telehandler mounting brackets. Ensure bale tyne tightness is regularly checked. Tynes should be tightened to 700 Newton meters. This is equal to applying 70 KGs to a one-meter bar.
