Implementing Advanced Knowledge
bits
4.4.2 Pylos
IaaC Research / Sofoklis Giannakopoulos
Pylos - 3D printing with soil and natural materials “Ironically, most public housing in the world today is done without the cooperation of either the architect or the society. It is a bureaucratic decision built by contractors, wherever is horizontal or vertical, it almost immediately becomes a slum. It is perhaps the final irony of our age. It costs more to produce this form of ugliness and that we will be driven toward better, more beautiful housing simply because we cannot afford any other kind” Hassan Fathy The Institute for Advanced Architecture of Catalonia (IAAC), based in Barcelona, has been, for some time now, exploring and investigating the potentials of additive manufacturing (3D Printing) applied to the architectural field, therefore implemented on a larger scale (eg. Minibuilders). With the interest of further developing the potentials of this technique on the large scale, and in view of the environmental and economic crisis, IAAC has been investigating the possibility of on site additive manufacturing and fabrication with local and 100% natural materials. The objective was to develop a technique that went beyond the robot – relying only on its mechanical properties – and allowing a design research based exclusively on the material properties and behaviour. This research process included the optimisation of material mix, using only natural additives, as well as optimizing fabrication times. The Pylos research project develops 3D printing as a large scale construction method, moreover developed with natural, biodegradable, recyclable and locally found materials, an undeniable interest particularly in this time of economic and environmental crisis. This material can not be other than soil. The project focuses on the natural properties of soil. Earth, or Soil, as a construction material has been used since Neolithic times. The advantages of an earth – soil structure are primarily related to both the environment and economy, being secure and friendly to our environment. Soil also offers the benefits of natural insulation, fire protection, air circulation, low first cost, 100% recyclable structures, stiffness, great strength, thermal flywheel effect, low greenhouse emissions,
Cover - Pylos, Sofoklis Giannakopoulos Figure 1 - Raw soil Joint, Sofoklis Giannakopoulos Figure 2 - Process, Sofoklis Giannakopoulos 2
4
regulating the climate and providing a healthy Indoor environment. The project focuses on the behavior of the soil for 3D printing when mixed with other ingredients, towards a better understanding of the material, and potential composites. The material results obtained through the development of the first phase of this research project are extremely promising a new, more than 96% based in soil, material that has 3 times higher tensile strength from industrial hard clay. The importance of the material chosen for this additive manufacturing research is not related only to the unlimited existing quantity but also to decrease the emerging degree of embodied energy within the fabrication process, transportation hazards and production independent of electricity, fuel availability and greenhouses effects. The project is also inspired by one of unbaked soil properties. Soil can be recycled an indefinite number of times over an extremely long period. Old dry loam can be reused after soaking in water, so loam never becomes a waste material that harms the environment.
Figure 3 - Pylos, Sofoklis Giannakopoulos Figure 4 - Process of locally extracted material, Sofoklis Giannakopoulos Figure 5 - BCN exhibition Construmat, Sofoklis Giannakopoulos Figure 5 - Pylos, Sofoklis Giannakopoulos
6
In a moment in which there is a boom in global population growth and urbanization, with a high percentage of this population living in low quality housing conditions, it becomes imperative to push for affordable architecture and housing: low cost quality solutions for developed and developing countries. Pylos has proven significant possibilities in terms of design variations, ensuring a sound structural quality, low energy consumption, and undeniable affordability (0.50â‚Ź/kg). This project provides sustainable, lowcost, large scale solutions for the architectural scale through the digitalization and advancements of vernacular architecture and traditional techniques, creating a new vision for the future of the construction sector, architecture and the city. See all the prints and more on the official PYLOS site: pylos.iaac.net
Figure 2 - Arduino Project, IaaC Archive 8
Project credits:
Researcher : Sofoklis Giannakopoulos Research advisor : Areti Markopoulou Extensive support : Robotic expert : Alexandre Dubor , Computational expert : Rodrigo Aguirre Research project initiated in IAAC Open Thesis Fabrication 2013 program with the support of Enrico Dini (D-Shape).
Copyright Š 2014 Institute for Advanced Architecture of Catalonia All rights Reserved.
IAAC BITS
IAAC
DIRECTOR:
IAAC SCIENTIFIC COMMITTEE:
Manuel Gausa, IaaC Dean
EDITORIAL COORDINATOR Jordi Vivaldi, IaaC bits Editorial Coordinator
EDITORIAL TEAM Manuel Gausa, IaaC Dean Mathilde Marengo, Communication & Publication Jordi Vivaldi, IaaC bits Editorial Coordinator
ADVISORY BOARD: Areti Markopoulou, IaaC Academic Director Tomas Diez, Fab Lab Bcn Director Silvia Brandi, Academic Coordinator Ricardo Devesa, Advanced Theory Concepts Maite Bravo, Advanced Theory Concepts
DESIGN: Ramon Prat, ACTAR Editions
IAAC BIT FIELDS: 1. Theory for Advanced Knowledge 2. Advanced Cities and Territories 3. Advanced Architecture 4. Digital Design and Fabrication 5. Interactive Societies and Technologies 6. Self-Sufficient Lands
Nader Tehrani, Architect, Director MIT School Architecture, Boston Juan Herreros, Architect, Professor ETSAM, Madrid Neil Gershenfeld, Physic, Director CBA MIT, Boston Hanif Kara, Engineer, Director AKT, London Vicente Guallart, Architect, Chief City Arquitect of Barcelona Willy Muller, Director of Barcelona Regional Aaron Betsky, Architect & Art Critic, Director Cincinnati Art Museum, Cincinnati Hugh Whitehead, Engineer, Director Foster+ Partners technology, London Nikos A. Salingaros, Professor at the University of Texas, San Antonio Salvador Rueda, Ecologist, Director Agencia Ecologia Urbana, Barcelona Artur Serra, Anthropologist, Director I2CAT, Barcelona
PUBLISHED BY: Institute for Advanced Architecture of Catalonia ISSN 2339 - 8647 CONTACT COMMUNICATIONS & PUBLICATIONS OFFICE: communication@iaac.net
Institut for Advanced Architecture of Catalonia Barcelona
10
Pujades 102 08005 Barcelona, Spain T +34 933 209 520 F +34 933 004 333 ana.martinez@coac.net www.iaac.net