Disclaimer. Due to variations in the photographic and printing process, colours shown in this brochure may vary from the actual product. It is advisable to refer to a product sample before making your purchase. We reserve the right to change the specification of these products without prior notification.
V2.06.14
splashpanel.co.uk
waterproof wall panelling
splashpanel waterproof wall panelling for showers, bathrooms and wet rooms
splashpanel décors
accessory guide
1 END U CAP To start or end the assembly of the panels.
2. EXTERNAL CORNER To make an outside corner.
3. INTERNAL CORNER To make an inside corner.
4. H JOINT AND DÉCOR STRIP To make an H join décor strip BATTENor / WALL betweenADHESIVE 2 panels.
BATTEN / WALL
10mm trims available in 2.4m lengths
End U cap
Bright Silver •
•
External corner
•
•
Internal corner
•
H joint & décor strip
•
ADHESIVE ON BACK OF SPLASHPANEL
ON BACK OF SPLASHPANEL
White
SILICONE AT JOINT
Black
FILL WITH SEALANT END U CAP OR SCOTIA TRIM
• •
•
•
•
•
installation guide White
White Crystal
Pearlescent White
Installation instructions are available from your SplashPanel PVC Waterproof Panelling supplier and are also included within the product packaging.
Light Grey Marble
BATTEN / WALL BATTEN / WALL ADHESIVE BEADS ON BACK OF PANEL ADHESIVE BEADS ON BACK OF PANEL
ADHESIVE ON BACK OF / WALL BATTEN SPLASHPANEL
BATTEN / WALL
ADHESIVE ON BACK OF SPLASHPANEL FILL WITH SEALANT
BATTEN / WALL ADHESIVE ON BACK OF SPLASHPANEL
END U CAP OR SCOTIA TRIM FILL WITH SEALANT
ADHESIVE ON BACK OF SPLASHPANEL SILICONE AT JOINT
BACK OF SPLASHPANEL
END U CAP OR SCOTIA TRIM
BATTEN / WALL
BATTEN / WALL
ADHESIVE OR MECHANICAL FIXING ADHESIVE ON BACK OF SPLASHPANEL
ADHESIVE ON BACK OF SPLASHPANEL
FILL WITH SEALANT ADHESIVE BEADS ON BACK OF SPLASHPANEL
END U CAP OR SCOTIA TRIM FILL WITH SEALANT
SILICONE AT JOINT H JOINT STRIP
BACK OF SPLASHPANEL
SILICONE AT JOINT
2. Apply a continuous thick bead of adhesive around the periphery edge of the panel (50mm in from the panel edge), followed by further horizontal beads of adhesive spaced at 450mm centres across the back of the panel. Angle the panel edge fully into the previously fixed starting profile trim and firmly locate the panel onto the wall so that the adhesive on the back of the panel makes full contact with the wall at all points. Where a timber batten frame system has been fixed to the walls apply the beads of adhesive to the battens first rather than the back panel and then locate the panel in the same manner onto the adhesive / battens.
1. Start by fitting an End U Cap or Scotia Trim as required to the wall.
BATTEN / WALL ADHESIVE OR MECHANICAL BATTEN / WALL FIXING
Pergamon Marble
Suitable for wet and dry areas
A cost-effective alternative to tiling
Travertine
Pearlescent Black
Black Crystal
Non-porous and mould free
Tongue & groove panels
Full range of accessories available
Virtually maintenance free
Easy to clean and hygienic - simply wipe clean
Suitable for domestic installations
fixing options
Material
Height x width*
Thickness*
White
PVC
2400mm x 1000mm
10mm
White Crystal
PVC
2400mm x 1000mm
10mm
Pearlescent White
PVC
2400mm x 1000mm
10mm
Light Grey Marble
PVC
2400mm x 1000mm
10mm
Pergamon Marble
PVC
2400mm x 1000mm
10mm
Travertine
PVC
2400mm x 1000mm
10mm
Pearlescent Black
PVC
2400mm x 1000mm
10mm
Black Crystal
PVC
2400mm x 1000mm
10mm
*All dimensions are nominal
FILL WITH SEALANT
ADHESIVE BEADS ON BACK OF SPLASHPANEL
product dimensions
Simple and quick to fit - no wet trades required
ADHESIVE OR MECHANICAL FIXING ADHESIVE BEADS ON BACK OF SPLASHPANEL
FILL WITH H JOINT SEALANT STRIP
SplashPanel PVC Waterproof Panelling is fixed by adhering the panels to an appropriately sound, flat and plumb sub surface. If the sub surface is uneven then a timber batten frame system should be installed to give a suitable sub surface to adhere to. The full product installation instructions are supplied with every panel, and are also available via your SplashPanel supplier. Alternatively the fitting instructions can be downloaded from www.splashpanel.co.uk H JOINT STRIP
3. Apply panel adhesive to the reverse of the next panel and fully insert the panel’s tongue into the previous panel’s groove adding a small silicone bead at the joint.
4. If H type mid-joint trims are being used to cover panel joints the H joint profiles adhere using panel adhesive.
BATTEN / WALL ADHESIVE OR MECHANICAL FIXING
ADHESIVE BEADS ON BACK OF SPLASHPANEL FILL WITH SEALANT
care & maintenance SplashPanel PVC Waterproof Panelling is more hygienic and easier to maintain than tiles. The non-porous surface provides excellent protection against bacteria and stains. SplashPanel PVC anti-bacterial cleaner kills germs and keeps hard surfaces clean without scratching. Abrasive cleaners and bleaches MUST NOT be used on SplashPanel PVC Panelling.
warranty SplashPanel PVC Waterproof Panelling has a 5 year residential / domestic use warranty against manufacturing defects. A copy of the warranty is available via your SplashPanel supplier and as a download from the SplashPanel website - www.splashpanel.co.uk Installation of your SplashPanel PVC Waterproof Panelling must be as per the instructions supplied, as incorrect installation will void the warranty.
splashpanel.co.uk
H JOINT STRIP