Ideal Livewire 52: Sept - Oct 2021 by Ideal Electrical Suppliers NZ

IDEAL lighting SOLUTIONS

NHP SHEDS LIGHT ON HAZARDS PAGE 58-60

LED STRIP LIGHTING PAGE 68

PLUS NEWS, PRODUCT RANGES & INFORMATION GUIDES FROM IDEAL ELECTRICAL SUPPLIERS

SEPT 2021

INCLUDING BONUS

IDEAL LIGHTING SOLUTIONS GUIDE PG. 43

NE WS, PRODUCT RANGES & INFORMATION GUIDES FROM IDEAL ELECTRICAL SUPPLIERS

ISSUE 52 | VOLUME 04 | SEPTEMBER - OCTOBER 2021

CONTENTS 03 A WORD FROM IDEAL

24 BIZLINE SOLUTIONS

04 PLUGGED IN

29 BIZLINE PLUGGED IN PREWIRE

05 PLUGGED IN WITH HAGER

31 SUBCIRCUIT PROTECTION

10 SCHNEIDER - WISER

32 BARRIER GLANDS

12 EZVIZ HOME SECURITY

34 MILWAUKEE LASERS

16 SERENE HEATING

38 WILD SOLAR DEALS!

18 MATCHMASTER - THE PREWIRE

43 IDEAL LIGHTING SOLUTIONS

22 HAMER - KPA VS PSI

ELECTRICITY EXPLAINED... CAN YOU FIND VOLT HIDING IN 5 SPOTS IN THIS LIVEWIRE? ENJOY!

2 | LIVEWIRE

Since August 18 we have all been reminded of the impact lockdowns have on our respective businesses. On behalf of Ideal we want to thank you for your patience and support. th

Although we were all aware of the international effects of COVID, the sudden restrictions put in place on us here in NZ have allowed us to prove our resilience and ability to adapt. One thing is certain, we should never take anything for granted like the values and importance in life of family, work colleagues and friends. Times like these can present extremely stressful situations for many and some will have challenges over and above the current COVID ones. Ideal are here to support you as we all work towards a united approach on the current landscape. Please take the time to consider others and know we’re all in this together for a stronger outcome for all. During such times our business will adapt to service your everyday requirements whilst focusing on the safety and wellbeing of our customers and employees. Our Ideal Webstore www.ideal.co.nz is always online for your safety and convenience. I am encouraged about the buoyant economy ahead that will support future growth opportunities. Thank you again for your ongoing support.

Roger Edgar

Managing Director Ideal Electrical Suppliers

SEPTEMBER - OCTOBER 2021 | 3

TREAT YOURSELF! REDEEM OVER 5000 REWARDS, ASK INSTORE TODAY

Earn PLUGGED IN POINTS when you purchase with Ideal and you could be reaping some serious rewards. Spend your PLUGGED IN POINTS on the things that matter to you.

invicta panelboard invicta panelboard

Optimised solution Optimised solution More possibilities

BONUS!

Purchase an invicta panelboard and receive 1500 plugged in points*!

More possibilities

Available from 24 to 72 Pole chassis, our invicta panelboard range is designed to suittolarge light commercial or retail applications. Now extended 60 orhome, 72 Pole chassis, our invicta panelboard range is designed to suit large home, light commercial or retail applications. The invicta range comes fitted with 2 x 8 poles of DIN space, split neutral and range earth links forfitted easy with cabling, door, and the option The invicta comes 2 x 8reversible poles of DIN space, split neutral for MCB incomer linkcabling, kit... making it the door, benchmark multi-usage andan earth links for easy reversible and theforoption for an MCB panelboards. incomer link kit... making it the benchmark for multi-usage panelboards. hagerelectro.co.nz hagerelectro.com.au

*T&Cs Apply. Promotion period 13 September - 31 October 2021. Applies to Plugged IN Members only. While stocks last.

GIVING OUR KIWI 2021 PRODUCTS SUPPORTING

ALL BIZLINE PRODUCTS purchased support the Ideal Foundation. See pages 34-37 for some of the BizLine range.

37-70 INCH FULL MOTION BRACKET CDYLPA36466

See pages 6-7 for Legrand lighting and sensor range in support of the Ideal Foundation.

CONDUIT FLEX EASI 20/25MM MAR3020G, MAR3025G

CONDUIT FLEX SOLA 20/25MM HD MAR3020GHDSOL50, MAR3025GHDSOL50

PATCH PANEL 24PORT CAT6 UTP TYPEA CDYPPC624

PIR SENSOR SURFACE MOUNT AUTO / MAN BLK KEYSTONE JACK RJ45 CAT6 180 DEG T568A/ T568B

HPM630SM01BL

CDYFPC6007

37”-75” TV WALL MOUNT CDYLP4646T

IDEAL FOUNDATION IS PROUDLY SUPPORTED BY:

CONDUIT FLEXIBLE 20MM SUPA MAR3020PPG

M12 FUEL SURGE QUARTER HEX HYDRAULIC DRIVER MLW48227608

BACK TO COMMUNITIES THE IDEAL FOUNDATION

FISH STICK 6 X 1.5 RODS 9PC KIT TAPE MEASURE 8M

MLW48224155

MLW48227608

MANROSE QUIET WALL/ CEILING FAN MANFAN7180, MANFAN7181, MANFAN7182, MANFAN7183, MANFAN7184, MANFAN7185

PACKOUT ROLLING TOOL BOX

RCBO SINGLE MOD 20A TYPE A 1P 6KA 30MA HAGADC920T

MLW48228426

MANROSE QUIET THROUGH WALL KIT

MANFAN7187, MANFAN7188, MANFAN7189, MANFAN7190, MANFAN7191, MANFAN71892

THE KING DOWNLIGHT 7W 90MM PHIDN021B7D90

10W 120MM

PHIDN021B10D120

LEONIE LED FL IP65 10W/20W/30W/50W 840

THO96630335, THO96630336, THO96630337, THO96630338

LEONIE PLUG & PLAY MWS THO96630339

Te-na- koutou katoa The cry I often hear is when will AS/ NZS 3000:2018, Electrical Installations, known as the Australia/New Zealand Wiring Rules, be cited? I consider we are lucky or wise in New Zealand, in a short space of time we have seen two amendments to these rules take place, in Australia these amendments have been adopted. A further alteration is already in the pipeline and going on past experience will likely take a while! For New Zealand there is some perceived light somewhere in the tunnel. In April MBIE released for public comment a document “Updating the references to standards in the electricity and gas safety regulations”, one of the proposals is to jointly cite AS/NZS 3000:2018 and AS/NZS 3000:2007 with modifications! The outcome of this document will be interesting! New Zealand, electricity legislation has evolved into multiple layers much like an “onion”. An “outer layer” the overarching Electricity Act (1992) covers most of the electrical industry from generation to end user and areas such as the operation and powers of the EWRB. The next “layer” is the Electricity (Safety) Regulations (2010) which sit under the Act. We then have multiple standards “Cited” by the Regulations. For better or worse the standards are referred to by number, date, and title, necessitating a change to the Regulations to allow the adaption of a redated standard, this has been the stumbling block in

allowing the use of revised standards. Adding to the myriad are the terms used in the various parts of the legislation, “Interpretations” in the Act and Regulations “Definitions” in the Standards often have a different meaning to the other legislative documents. In August 1888 Reefton had the first official supply of electricity available to the public. In November 1888 a set of rules were produced. The rules or legislation of today follow the same principle as 1888, the use, generation and conveyance of electricity shall not hurt people or damage property and shall be safe. Since 1888 we have had several refinements to “Wiring Rules” from what have at times been prescriptive to where we are now that allow for innovation. As an electrical worker have things really changed in what we do since 1888? The basics are still the same, make sure your work is safe. What you do, and leave completed, is not going to hurt anyone or cause damage. Since before 1888 technology has changed at a rate faster than any set of rules ever can and will continue to do so. Our greatest challenge is to remain technically competent in what we do and ensure electrically safety. Legislation requires what we do to be “electrically safe” this will, as in 1888, be a judgement call by the electrical worker and one of the reasons we hold registration and a licence and need understand what we do and stay competent.

Is a document that has a different date on it going to make what we do any safer or us more competent? Like most rules we can follow them and still cause problems for ourselves and others. We need to be compliant with the legislation and at the same time we need to be continually thinking about and reviewing what we do. Just because “we have always done it that way” does not mean it is still fit for purpose. Would you still use a rewireable fuse rather than a MCB or HRC fuse? Will AS/NZS 3000:2018 solve the problem? Then again what is the problem if we remain understanding and technically competent in our work and can justify the decisions we make as a registered and licenced electrical worker! John Hutton Technical Services Manager Master Electricians

Are You Ready?

We Are.

CUCINA Kitchen Fan

QUIET Fan Kit

TH BA

COMPLIANT

HEALTHY HOMES M S & KIT

Contour Fan

Hyper150 EC Axial Fan

Contour Inline Fan Kit and Contour Fascias

Contact your Simx representative for more information on a winning solution for you

www.manrose.co.nz

Wiser by SE App

360Degree ZB/IR Converter

Switch Motion Sensor

Imagine making every home a smart home with PDL Wiser.

Dimmer

Temperature/ Humidity Sensor

Wiser hub Internet

Be at the forefront of your next smart home installation with PDL Wiser™, a solution that combines local know-how with Schneider Electric’s unrivalled global R&D and extensive smart home expertise. Best of all, a Wiser Smart Home solution can be upgraded with modular components as your customer’s needs change. Plus your customers can integrate products from the Iconic range, so their Wiser Smart Home can grow with them.

pdl.co.nz/wiser-installer 10 | LIVEWIRE

Blind Switch Window/Door Sensor Water Leakage Sensor

Connected Socket Switch

PDL Wiser Smart Home components. Wiser Smart Home Hub

Wiser IR Converter

The Wiser system communication interface. The hub allows you to control the home from a remote location.

Controls TVs, heat pumps and HiFi systems via the Wiser by SE app using infrared (IR) technology. PDL501401

PDL501902

Wiser Table Stand for Hub

Wiser Iconic Switch, 2AX

Optional stand for placing the Wiser Hub on a table or other flat surface.

Ideal for controlling LED lighting loads and exhaust fans. The small housing with integrated terminals allows quick installation into 6-gang plates and standard wall-boxes.

PDL5019020001

PDL356PB2MBTZVW

Wiser Micro Module Switch

Wiser Iconic Dimmer

Transforms a conventional push-button switch into a connected device you can control from the switch or through the Wiser by SE app.

Suitable for controlling a wide variety of loads. The housing with integrated terminals allows quick installation into 3-gang plates and deep wall-boxes.

PDL5011WSZ

PDL354PBDMBTZVW

Wiser Micro Module Dimmer

Wiser Iconic Switch, 10AX

Transforms a conventional push-button switch into a connected device you can control from the switch or through the Wiser by SE app.

Suitable for controlling a wide variety of loads. The housing with integrated terminals allows quick installation into 3-gang plates and deep wall-boxes.

PDL5010WDZ

PDL356PB10MBTZVW

Wiser Micro Module Blind Controller

Wiser Iconic Twin Socket Grid, 10A

Transforms a conventional double push-button switch into a connected device you can control blinds from the switch or through the Wiser by SE app.

The Iconic Connected Socket has two independent 10 A rated socket outlets. The subtle Iconic status LED indicator can be customised using the Wiser by SE app. Skin code is PDL395CSC.

PDL5015WBZ

PDL395CSGZ

Wiser Window/Door Sensor

Wiser Iconic Switch, 2AX

Detects opened and closed windows and doors, and reports the status to the Wiser Hub. It consists of two separate parts: a sensor and magnet.

Ideal for controlling LED lighting loads and exhaust fans. The small housing with integrated terminals allows quick installation into 6-gang plates and standard wall-boxes.

PDL591011

PDL356PB2MBTWVW

Wiser Motion Sensor

Wiser Iconic Dimmer

Detects movement and measures luminance in a room, and reports the status to the Wiser Hub.

Suitable for controlling a wide variety of loads. The housing with integrated terminals allows quick installation into 3-gang plates and deep wall-boxes.

PDL595011

PDL354PBDMBTW

Wiser Temperature/Humidity Sensor

Wiser Iconic Switch, 10AX

Helps to maintain a comfortable environment in the home by detecting changes in temperature and humidity and reporting climate data to the Wiser Hub.

Suitable for controlling a wide variety of loads. The housing with integrated terminals allows quick installation into 3-gang plates and deep wall-boxes. PDL356PB10MBTW

PDL593011

Wiser Water Leakage Sensor

Wiser Iconic Twin Socket Grid, 10A

Detects the presence of water and alerts via an alarm and/or notification. When the sensor is connected to the Wiser Hub and detects water on the floor, it sends out a sound alarm and reports the event to the Wiser Hub.

The Iconic Connected Socket has two independent 10 A rated socket outlets. The subtle Iconic status LED indicator can be customised using the Wiser by SE app. Skin code is PDL395CSC.

PDL592011

Zigbee connectivity

Bluetooth connectivity

pdl.co.nz/wiser-installer

PDL395CSG

NEW BC1 Battery-Powered Wireless Camera Kit

Longer Lasting Battery BC1 Kit Options: 1 Base Station + 1/2/3 BC1 Cameras

1 Base Station + 1 BC1 Camera

1080p Video

12,900 mAh Rechargeable Lithium Battery

Color Night Vision

Accurate Human Motion Detection

Active Defense

Customizable Voice Alerts

Two-Way Talk

IP66 Dust and Water Protection

Supports 2.4 GHz Wi-Fi

H.265 Video Compression

Base Station Included (Supports MicroSD Cards up to 256 GB) 1 Base Station + 2 BC1 Camera

1 Base Station + 3 BC1 Camera

IDEAL CODE

EZVBC1B1

EZVBC1B2

EZVBC1B3

12 | LIVEWIRE

DISTRIBUTED BY

OUTDOOR SECURITY 2-IN-1 OUTDOOR SMART SECURITY CAMERA & LIGHT The EZVIZ LC1C is a security camera and outdoor floodlight in one product, meeting your need for both security and night-time illumination in the yard, driveway, and more. More active than just blasting a combined 2,000 lumens of brightness, the LC1C Camera monitors your surroundings with active defence and real-time motion notifications. KEY FEATURES • Power Supply: Hardwired (100v - 240v) • Power Consumption: ≤35W • Ingress Protection Grade IP65 on camera • Product Dimensions: 268mm (H) x 186mm (W) x 185mm (D) Light Parameters • Lamp: 2 • LED: SMD LED • Brightness: 2000LM (+/-10%) • CRI80 • Color Temperature: 3000K • PIR Sensor Detection • Detection Distance: 10 meters (33 feet) • Detection Range: 270-degree Camera Parameters • Resolution: 1920 × 1080 • Field of View: Horizontal angle: 103°; Vertical angle: 57°; Diagonal angle: 121° • Night Vision: Up to 25 m (82 ft.) Audio Parameters • Audio Input: Built-in Omni-direction microphone • Audio Output: Built-in loudspeaker • Audio Quality: Noise suppression

IDEAL CODE

COLOUR

EZVLC1CWHT

WHITE

EZVLC1CBLK

BLACK

MICRO SD MEMORY CARDS • 128GB Micro SD High-Speed Certified Flash Card with Adapter Class 10 • 256GB Micro SD High-Speed Certified Flash Card with Adapter Class 10

IDEAL CODE

CAPACITY

CDYSDMICRO128G

128GB

CDYSDMICRO256G

256GB

SEPTEMBER - OCTOBER 2021 | 13

ELITE CONTROL ALARM KITS NZ Designed & manufactured security and control full alarm kit, perfect for residential installations. 1 x Additional Optex OPT-RXC-ST included in every kit! KIT INCLUDES: • • • • •

ESL-2 control panel 2 x OPT-RXC-ST Optex Detectors KP-ICON-OEM Keypad Flush Internal Sounder External Siren with Strobe (Charcoal option available) • 7.5amp 12V back-up Battery • 4C2-100-CU Security Cable IDEAL CODE ARHESL2KIT7

NEW! SIREN FEATURES: • • • • • • • • • • •

Slim design 114dB siren 2 year warranty 10 - 15VDC siren, strobe & LED Max current - 250mA Inbuilt front/rear tamper High bright LED strobe Optional status LED UV stabilised housing Available in charcoal (EC-SIREN B) Compatible with ESX, ESL-2, Other control panels or products with 12VDC supply

NEW LOW PROFILE LOOK! Dimensions: 150mm W x 250mm H x 39mm D

Note: ESL2KIT7 added value differ between publications.

BE IN TO

WIN! 14 | LIVEWIRE

BE IN TO WIN 1 OF 3 DYSON BLACK NICKLE HEATERS! Purchase the ESL2KIT7 and you’ll go into the draw to win 1 of 3 Dyson black nicklel heaters!*

*T&CS: Promotion Period 13 September - 31st October 2021. Spend must be from single invoice only. One per account holder. Trade account holders only.

ALARM KIT ACCESSORIES IDEAL CODE

WIRELESS 433MHZ ACCESS KEYPAD

ARHBBECODE

This keypad is used to control your gate without the need for wiring. Up to 254 different codes can be used within the keypad.

IDEAL CODE

STAINLESS STEEL IP INTERCOM

ARHDBD101S

See your visitors, speak with them & open the door by smartphone or tablet from almost anywhere in the world. DoorGird combines innovative technology with exclusive design to keep you in touch with your home or business. Thanks to the integrated high-end motion sensor you always know what happens in front of your home. The 180° infrared motion sensor (if desired} can set off an alarm without the visitor having rung the doorbell.

COMPLETE SWING GATE 24V GATE SYSTEM

IDEAL CODE ARHBBOB3024EP

Quality Italian made gate automation. 24V/DC dual swing gate automation kit with capacity to add battery back-up facility (sold separately). Suitable for gates up to 3m per leaf. KIT INCLUDES:

2 x BOB3024E.ANZ 1 x Brainy 24 1 x Pupilla 2 x TO.GO2A 2 x B-BSR

SEPTEMBER - OCTOBER 2021 | 15

LE MINUTEUR POWER SAVING BATHROOM HEATER Le Minuteur S207T will heat efficiently even the largest bathrooms. This classic has been updated and refined to feature a new low noise fan, optional 30 minute runback timer and efficient 2kw heating element. Le Minuteur S207T is available in 304-polished Stainless steel or French White and features two safety cut-outs. FEATURES • 2.0 kW • New low noise fan • Two safety cut outs • EU ErP directive compliant • 30 minute countback timer option • 5 year full replacement warranty

SRLS207TW

SPECIFICATIONS • W: 375mm H: 220mm x D: 140mm • Wattage: 2.0kW • IP Rating: 20 • Installation: Wall mount – High • Construction: All-metal body and fan

IDEAL CODE

COLOUR

SRLS207TSS

Polished Stainless Steel

SRLS207TW

French White

16 | LIVEWIRE

SRLS207TSS

INTERIOR HEATING

S2068 CLASSIC BATHROOM HEATER High performance, economical and simple to install. FEATURES • White, Stainless Steel, and colour cover options available. • Wall mounting – high level. • Built-in safety cutout and fusible link. • Blue power indicator. • Metal fan blade. • Step-down thermostat that cuts the heater element setting down to half power. SPECIFICATIONS • W: 300mm H: 210mm x D: 110mm • Wattage: 2200–2400W • IP Rating: 20 • Installation: Wall mount – High • Construction: All-metal body and fan • 220-240 volt A.C. • 5 Year Warranty

SRLS2068W

S2068 CLASSIC BATHROOM HEATER COVER OPTIONS

SRLC2068EG

SRLC2068MB

SRLC2068SR

IDEAL CODE

COLOUR

SRLS2068W

Classic Bathroom Heater

SRLC2068TB

Matt Black Cover

SRLC2068SY

Sunshine Yellow Cover

SRLC2068EG

Egyptian Gold Cover

SRLC2068SR

Serene Red Cover

SRLC2068TB

Typhoon blue Cover

SRLC2068SY

SRLC2068TB

SEPTEMBER - OCTOBER 2021 | 17

THE PREWIRE The Domestic Prewire can be a contentious subject as everyone seems to have a point of view so here we will discuss a few of the principles and trade-offs involved and hopefully simplify the process a little for the installer. The challenge is to accommodate all of the viewing habits the home owner has at present and then to also balance this against any future habits of, not only a growing family, but also any possible future owners of the home when the original family decide to move on. Often the rush towards the finish line when building can make the prewire seem like a low priority but the reality is once the wall lining is on, any future considerations for AV become much more difficult. Anyone contemplating a wireless future should consider the likely age of any immediate or future occupants of the home as there is no substitute for copper in the wall for reliability and ease of use.

relatively inexpensive nature of the cable. It normally also has the advantage of returning the IR signal back to the AV source, (in the opposite direction the picture and sound are travelling) simplifying remote control from all locations back to the AV source. It is recommended to avoid patch panels and faceplates when choosing CAT6 distribution, and cable directly between transmitter and receiver using brush plates (see 05MM-WP64). This is to avoid the loss associated with too many intersections leading to drop out and picture instability and this means wiring directly from the equipment area to a TV location rather than through the CAT6 hub. REST OF HOUSE

HDMI DISTRIBUTION VIA CAT5/6 34MM-2K50-3

RG6 We would recommend every current, or possible future, TV or Sky decoder location, be wired with 1 x RG6 each back to the distribution point (typically a recessed box in the garage or a nominated equipment area in the house). If modulation for distributing SKY around the home is being considered, then you also need a second RG6 to transmit the newly created Sky DVB-T channel back to the RG6 distribution point from that SKY decoder location. In addition to this you also need to make the RG6 connections from the roof mounted Aerial or Satellite dish to feed the same distribution point. If you have both mounted on the roof then run a separate cable for each but if left with no choice you can combine the Satellite and Terrestrial signals into one cable with an outdoor diplexer. TYPICAL SKY AND/OR FREEVIEW TERRESTRIAL RG6 WIRING DIAGRAM 13MM-R65P

10MM-DDA24

HDMI SOURCE

LOCAL TV

Another reason to prewire with CAT6 is to give each TV location a hardwired connection to the internet for the online content available in smart TVs . This is to avoid WIFI congestion and improve reliability and capacity as our connection speeds improve into the future. If you intend to run HDMI leads to distribute an AV source to all TV locations, then you also need to consider running a CAT6 lead for returning the IR commands back to the source. Whilst there are kits available to run a remote control signal over an HDMI lead there is nothing that takes into account more than one location. These IR signals can be run through a patch panel and/or faceplates as the signal is very robust once captured into a copper connection.

02MM-MDU50

HDMI 10MM-MT67

CAT6 Whole house distribution of an AV signal over CAT6 is now very popular due to the ease of the prewire and

18 | LIVEWIRE

Prewiring with HDMI is normally a performance option when picture and sound performance are a priority. HDMI also currently happens to be the most cost effective way into 4K capacity, as 4K extenders continue to be relatively expensive compared to their 1080p cousins and modulation has an upper limit of 1080p. Whilst early, or low-cost, HDMI cables have a reputation for failing over

10m, Matchmaster’s current range of HDMI leads are fully tested and rated to work up to 20m with a 4K signal. Simply add an HDMI splitter to the AV source and match the outputs to the number of TV’s. If you have a request for more than one HDMI source, consider an HDMI Matrix switcher. These are designed to allow switching between HDMI sources from any connected TV, independently of what the other TV’s may be set to. For the prewire, whether using an HDMI Splitter or Matrix Switcher, each TV location only needs one HDMI lead back to the equipment area. 34MM-HDS4 CONNECTION DIAGRAM

ALL TV’S

HDMI SOURCE

ARC (AUDIO RETURN CHANNEL) Often overlooked in the prewire is consideration for transmitting the TV’s digital sound output back to an AV Amp or Soundbar location. As the drive towards thinner TV’s continues, TV manufacturers are struggling to keep sound quality advances on a par with an increasingly better picture performance. ARC is normally bundled with CEC code transfer and source on/off as well, which can be either an installer nightmare (if not handled well by the TV or HDMI source manufacturer), or a very helpful feature for the end user. Most HDMI cables have this feature as standard however it is rare to find a reliable extender that supports ARC, CEC, and IR all in one (see our 34MM-4K70-ARC). 34MM-4K70-ARC

HDMI Picture & Sound ARC, CEC and IR

If ARC over an HDMI lead or extender is not an option, consider installing an Optical Toslink lead back to the equipment area. Common to almost all TV’s, Soundbars and AV Amps, this connection doesn’t carry any remote control signals but does have the same ability to transmit

digital audio as the ARC connection. (see 04MMTOS1 to 04MM-TOS20). If the install is complete and the wall lining is on, there is the option of transmitting the optical signal over yet another CAT5/6 cable using a Digital Audio Extender (see 34MM-DAE1). EARC (ENHANCED AUDIO RETURN CHANNEL) eARc has the potential to reshape the prewire for hometheatre. Claimed to much improve the connection and unpredictable sync ailments sometimes associated with standard ARC, this new format also increases capacity from 1Mbps to 37Mbps, which, unlike standard ARC, should allow all current sound formats to pass without the need of any further compression. Potentially this means all HDMI sources can be connected directly to the TV and an HDMI cable can be used to transmit the maximum bandwidth of the source’s audio signal intact to an eARC compatible Soundbar or AV Amp. Potentially we may even see cheaper AV amps without any video switching onboard coming onto the market as the TV becomes the HDMI hub. This also has the benefit of simplifying the user experience. POSSIBLE eARC SETUP

FUTURE PROOFING AND DAMAGE MITIGATION In an ideal world we would likely have floor to ceiling conduit installed to every current, or likely, TV position in a home. Given the constraints of budget, time, building regulations and the available options, what is realistic and achievable for future proofing, and for providing some options for when things do get damaged onsite. With 4K sources being slow to mature in NZ, the market has been relatively happy to stick with 1080p for domestic distribution in general. England and Australia have both had their mainstream Satellite Pay TV providers delivering 4K for some years and if rumours are true, we may see some development in this area mid 2022…now might be the perfect time to start thinking SEPTEMBER - OCTOBER 2021 | 19

about offering an option to increase that installation capacity to 4K.

MODULATION Each Active TV location: 1 x RG6 (Freeview/AV) 3 x CAT6 (IR, Internet, and Damage/Future)

Damage on work sites is inevitable and HDMI leads, whilst delivering the highest quality picture and sound, have the greatest potential for damage due to the larger 19pin head shells and generally larger cable gauges when compared with CAT6 or RG6, so running a relatively cheap length of CAT6 with each installed HDMI lead is highly recommended. Damage to CAT6 or RG6 is less likely but common enough to warrant consideration as well but once equipment locations are known Matchmaster has the following recommendations as a guide:

Each possible future TV location: 1 x RG6 (Freeview/AV) 2 x CAT6 (Internet, IR)

(All wiring suggestions assume distribution of one AV source (typically Sky) to many TV’s and wall mounting all TV’s with no line of sight to any AV components)

2. No consideration has been given for any speaker arrangements

HDMI DISTRIBUTION Each Active TV location: 1 x RG6 (Freeview) 1 x HDMI lead 3 x CAT6 (IR, Internet, and Damage/Future) Each possible future TV location: 1 x RG6 (Freeview) 2 x CAT6 (AV, Internet) Each Sky decoder location: 1 x RG6 CAT6 DISTRIBUTION Each Active TV location: 1 x RG6 (Freeview) 3 x CAT6 (AV, Internet, and Damage/Future) Each possible future TV location: 1 x RG6 (Freeview) 2 x CAT6 (AV, Internet) Each Sky decoder location: 1 x RG6

20 | LIVEWIRE

Each Sky decoder location: 2 x RG6 PREWIRE NOTES: 1.

No provision in the prewire suggestions above has been made for ARC/eARC for either a Soundbar or an AV Amp

3. The suggestions made are concentrated on the AV needs of the home and no provision has been made for hardwiring the internet to the wider demands of the house eg CCTV, wireless access points or household computers and printers etc. 4. No provision has been made for hardwiring the internet to any AV sources or Amplifiers. 5. Please remember the CAT6 for AV, is run back to the equipment area, where as CAT6 for the internet, is run back to the CAT6 distribution point. This may or may not be the same area. SUMMARY The prewire is remarkably similar across all three distribution methods and this is very convenient if a final decision on method of distribution, seating/TV positions, or number and type of AV sources, has been delayed. If the final details on equipment, seating, type of viewing etc are hard to come by, then with RG6 and CAT6 being relatively inexpensive, covering more than one option can be considered. At the end of the day the prewire will come down to taking an educated guess at the viewing habits of not only the current homeowners’ family but any future owners, and then incorporating as much future proofing and damage mitigation as budget and tolerance allow. Remember cabling is never cheaper than when the wall lining is off.

SPLITTERS & LEADS HDMI 2.0 SPLITTER WITH BUILT IN DOWNSCALER • Our HDMI splitters have all been engineered to work with the longest cable runs, passing full capacity (18Gbps) from all outputs simultaneously. • 2 & 4 Way splitter options MTM04HDS2

FRONT

BACK

FRONT

BACK

MTM04HDS4

IDEAL CODE

DESCRIPTION

MTM34HDS2

2 WAY HDMI 2.0 SPLITTER

MTM34HDS4

4 WAY HDMI 2.0 SPLITTER

TOSLINK MALE TO MALE LEADS • For connecting your TV digital sound output to your Sound Bar or AV Amp • 1m, 3m, 5m, 15m, 20m lengths available • Includes right angle angle adaptor

MTM04TOS1

IDEAL CODE

DESCRIPTION

MTM04TOS1

1m with Right Angle Adaptor

MTM04TOS3

3m with Right Angle Adaptor

MTM04TOS5

5m with Right Angle Adaptor

MTM04TOS15

15m with Right Angle Adaptor

MTM04TOS20

20m with Right Angle Adaptor

MTM04TOS15

SEPTEMBER - OCTOBER 2021 | 21

kPa vs PSI

in Pressure Controls When it comes to pressure measurements, there are two universal options, kPa and PSI. So what are they, what is the difference and how do you move from one to the other? kPa (kilopascal) is defined as the pressure equalling 1 Newton per square meter. Developed by the Frenchman Blaise Pascal, this became the metric measurement for pressure as adopted by the majority of the world. Conversely, PSI is the imperial measure for pressure, defined as 1 pound-force per square inch, which has been adopted by the United States as their standard measurement for pressure. There are some exceptions to the geographical rules. Such as universally kPa is used for many science applications, whereas PSI is often used in the automotive industry. So why is this important? Because both kPa and PSI are measurements of pressure, you can find both present across your day to day life.

22 | LIVEWIRE

In insolation, this isn’t a problem, but when you come across two parts of a system with different units of measurement, it’s important to understand firstly how they differ, and secondly how to convert between the two. kPa and PSI are measuring effectively the same thing, just on a different scale to on another. This is where you need to convert one to the other to ensure you are setting pressure controls to the right level. 1 PSI = 6.895 kPa If you are needing to convert PSI to kPa, use the following formula: (PSI number) / 6.895

If you are needing to convert kPa to PSI, use the following formula: (kPa number) x 6.895 If you were working with a pressure control that doesn’t match the pressure measure of your equipment, converting one way or the other will allow you to select the correct high event and differential range appropriate for that unit. Saginomiya are a leading brand is pressure controls and Hamer is proud to be delivering these to the New Zealand electrical market. To view the full range of products, visit www.hamer.co.nz.

PRESSURE CONTROLS SAGINOMIYA SINGLE PRESSURE CONTROL - SPECIAL VARIANT FEATURES: • New compact size - these are now the smallest and lightest in the industry • New design - new cover design has a larger and significantly clearer pressure scale plate & window and also covers the top • Single pressure control with auto reset • Allowable fluid temp -20°C to +120°C • Supplied without bracket and with female 1/4” BSPT • Note: 100KPa = 1 Bar - CE and UL available on request CONTACT ELECTRICAL RATING - SPDT • Inductive: 12A 250VAC • Locked Rotor: 72A 250VAC

IDEAL CODE

PRESSURE RANGE

DIFFERENTIAL RANGE

SGNSG302

-60 to 600KPa (-8.7 to 87 PSI)

60-400KPa (8.7 to 58 PSI)

SGNSG401

100 to 1000KPa (14.5 to 145 PSI)

100 to 300KPa (14.5 to 43.5 PSI)

SAGINOMIYA DYS-D306X3A DUAL PRESSURE CONTROLS - (AUTOMATIC RESET) FEATURES: • Dual pressure control with automatic reset and adjustable differential • For use with fluorinated refrigerants as well as with air and water • Allowable fluid temp: -20°C to +120°C • Flare nut, 1/4” 7/16-20 UNF thread • Note: 100KPa = 1 Bar • Supplied with mounting bracket • CE and UL available on request LOW SIDE: • Range: -60 to 600KPa (-8.7 to 87 PSI) • Differential Range: 60-400KPa (8.7 to 58 PSI) HIGH SIDE: • Range 800 to 3000KPa (116 to 435.1 PSI) • Differential fixed: Approx 400KPa (58 PSI) • Complete with independant contacts on high and low side CONTACT ELECTRICAL RATING - SPDT • Inductive: 12A 250VAC • Locked Rotor: 72A 250VAC

IDEAL CODE SGNSG101

BIZLINE ACCESORIES ELECTRICIAN WOVEN BAG HIGH CAPACITY! FEATURES: • Tool bag with large central pocket. • Reinforced floor and zip fastening. • Supplied with shoulder strap. SPECIFICATIONS: • Length (mm) : 440 • Width (mm) : 230 • Height (mm) : 320

IDEAL CODE BIZ700226

LEVEL 3 ANTI-CUT GLOVES SIZE 9 FUNCTIONS: • Composition: HPPE and spandex, PU coating. • Category II. • Abrasion reHandling of metal sheets, profiles, or any other sharp-edged parts. • Perfect for safe and precise cutting part handling operations in dry environments. • Resistance to cuts by slicing 3/5. • Tearing resistance 4/4. • Perforation resistance 2/4. • Cutting resistance according to TDM (ISO 13997) D.

IDEAL CODE BIZ730144

24 | LIVEWIRE

DIGITAL MULTIMETER 600 V FUNCTIONS: • This device measures AC / DC voltages, AC / DC current, resistance, frequency (electrical and electronic), performs diode and continuity tests. • Robust and waterproof, it is designed for intensive use.

IDEAL CODE BIZ780312

NON-CONTACT VOLTAGE TESTER 1000V FEATURES: • Security norm : CAT IV 1000 V. • Measuring range : 12 à 1000 VAC. • Voltage range : 50 VAC à 1000 VAC (50/60 Hz). • Red LED rouge blinks and beeping sounds.

IDEAL CODE BIZ780310

APRIL - MAY 2021 | 25

BIZLINE SOLUTIONS ADJUSTABLE RATCHET SPANNER 250 MM FEATURES: • Tighten/Loosen more easily! • Chrome molybdenum steel • Multi-component grip • Jaw opening 32mm

IDEAL CODE BIZ700598

CABLE SHEARS CROCO FEATURES: • 42 mm toothed polished stainless steel blade. • For cutting electrical cables (type H07), tubes, wiring ducts and retainers, cardboard, etc. • Light and easy to use thanks to return spring. • Safety clips into closed position.

IDEAL CODE BIZ700524

26 | LIVEWIRE

SQUARE TERMINAL CRIMPING PLIERS FEATURES: • To crimp insulated and non insulated lugs from 0.08 to 16 mm². • A single die to crimp lugs from 0.08 to 16 mm². • The die adjusts automatically to the lug crimped. • Lift and turn the thumb wheel to crimp up to 16 mm². IDEAL CODE BIZ790011

MULTI-DIAMETER HOLE SAW Ø 48-305 MM FEATURES: • To cut holes from 48 to 305 mm Ø. • Maximum depth 30 mm. • To cut through plywood, plasterboard, acrylic, fibrocement boards, etc. • Caution: not suitable for metal. • Adjustable blade positions. • Supplied with two carbide blades and two HSS blades.

IDEAL CODE BIZ700197

MAGNETIC SCREW BIT FEATURES: • In steel S2. • 1/4 “hexagon socket. • Philips and Square head options

IDEAL CODE

LENGTH

TYPE

BIZ781036

100mm

PH2

BIZ781037

150mm

SQ2

BIZ781038

100mm

PH2

BIZ781039

150mm

SQ2

IT’S MAGNETIC! VERY HANDY!

APRIL - MAY 2021 | 27

BIZLINE SOLUTIONS CONDUIT CUTTER 42MM FEATURES: • For cutting conduits suitable for PVC rigid or flexible conduit pipes and similar materials (PP,PE and PB). • Max. cutting capacity 42 mm (tubes and conduits) and 40 x 12.5 (mini truncking). • Reinforced structure with 2 material handles • Stainless steel blade • Safety clips in closed position • Ratchet, 470g • Lifetime warranty

IDEAL CODE BIZ790037

MULTI POWER BOARDS FEATURES: • 4 ways powerboard 10 A type I individual switchs on/off length 1.80m 3 x 1.0 mm² (BIZ390584) • 6 ways powerboard 10 A type I individual switchs on/off length 1.80m 3 x 1.0 mm² (BIZ390585) • 4 ways powerboard 10 A type I individual switchs on/off + USB type A x 2 + USB type C x 1 length 1.80 m 3 x 1.0 mm² (BIZ390582) • Individual Switch On/Off. • Surge protection. • Electrical specifications : 240 V AC - 10 A. • USB sockets specifications (for model with): USB A = 5 V - 2.4 A max / USB C = 5 V - 3 A max / Total = 5V - 3.4 A max. • Max output : 2400 W

IDEAL CODE

DESCRIPTION

BIZ390584

4 ways powerboard

BIZ390585

6 ways powerboard

BIZ390582

4 ways powerboard + USB type A x 2 + USB type C

28 | LIVEWIRE

BIZ390584

BIZ390585

BIZ390582

E E N I N L I L Z I Z I B B H T H IIT W W E E R I R I W W E E R R P P N I N I D D E E G G G G U P PLLU

S E X O B H S U FL

BIZ500910

serts n i d a e r h t l a with met

100

P LU G G E D IN P O I N TS ! PURCHASE

OXES B H S U L F E IN L x100 BIZ AND RECEIVE

INTS!*

IN PO x100 PLUGGED SLOTS FOR

SCREW FIXING

LENGTH : 94 mm. WIDTH : 65mm. DEPTH: 45mm. MATERIAL: polycarbonate. BOX OF x

EXTRA OPEN SPACE FOR EASE OF WIRE CONNECTIONS

2021. ber - 31 October rs only. o Period 13 Septem ugged IN membe om Pl Pr ly. y: on pl fy Ap ali s qu &C *T 00 x1 of ts lo x s each. Bo Limited to 10 boxe

BRADY Industrial & Portable Label Printers and Makers Ease of use, speed and efficiency guaranteed on every Brady printer Printers aren’t just about putting ink on a label. With the right printer, you can improve safety and efficiency throughout your facility. From materials to software and everything in between, Brady provides the expert tools you need for a complete identification solution.

ASK FOR A DEAL INSTORE!

IDEAL CODE BRD115158

BRADY Lockout Tagout designed for the way you work

Keeping your machines running keeps your business moving. But required maintenance means lockout tagout procedures must be followed to keep your employees safe. Whether you’re starting your lockout tagout program from scratch or taking your program to best in class, Brady can help every step of the way.

30 | LIVEWIRE

VERIFYING THE SUB-CIRCUIT PROTECTION RATINGS This test determines if the sub-circuit protection will operate in under 0.4 seconds if there is Phase – Earth fault of negligible impedance. This test must be done to verify each overcurrent device (fuse/MCB) on the M.E.N and other switchboards. First, we connect the standard lead (with 3-pin plug) to an outlet at the end of the sub-circuit being tested – this being the worst place to have such a fault, as it is here that the loop resistance is highest, and thus where over-current device will take the longest time to “blow”. This result should now be verified against the protection ratings Table 8.1 of AS/NZS 3000:2007 In this case, assume the overcurrent device is a Type-C miniature circuit breaker (MCB) rated at 16 Amps. As the reading of 0.23 Ohms is less than the maximum value allowed (as shown in the table), we can be certain that the device will operate in under 0.4 seconds if there is a phase to earth fault anywhere on this circuit. NOTE: Table 1 lists values for “fuses” - please be aware that the figures refer to HRC fuses only (i.e made to AS2005.21.1 - equivalent to BS 88). If you are checking the safety of any existing circuits protected by re-wireable fuses, then the table of maximum loop resistances on the below should be used. However, it’s advisable to replace rewireable fuses wherever practicable.

UP-RATING INSTALLED PROTECTIONS Should a situation arise where it is considered necessary to increase the rating of an existing over-current protection device, the procedure we have just followed may be used to determine the options available so as to still maintain an installation safety. CAUTION: The prodcedure outlined only relates to loop resistance and protection ratings. It takes no account of the ratings of the sub-circuit wiring concerned or the fittings connected to it. ensure each of these will also allow the safe up-rating to the intended over-current rating. Plug the loop tester in at the end of the sub-circuit needing up-rating. Perform a P-E loop test.

Consult Table 8.1 of AS/NZS 3000:2007; ensure the installed protection is safe (i.e that the max. loop value allowed is under that from the above test) WWW.AVO.CO.NZ

Use the table to see if the next higher rating (or the one that you wish to upgrade to) will still preserve installation safety

BARRIER GLANDS WITH INJECTION RESIN

PROBLEMS WITH CABLE CONSTRUCTION In order to comply with the installation codes of practice for hazardous areas, cable glands using elastomeric sealing rings should only be used on cables that are substantially round, compact with an extruded bedding and have nonhygroscopic fillers such as Figure 1. However, this cable construction is not always possible especially when it comes to multi-core cables. Figures 2 and 3 show cables that should not be used with glands with elastomeric sealing rings.

WHEN TO USE BARRIER GLANDS IEC 60079-14: Explosive atmospheres; Electrical Installation, Design, Selection and Erection Prescribes the selection of electrical equipment in hazardous areas. Knowledge of this Standard is imperative when selecting cables and cable glands for use in hazardous areas and merely referring to the product certification is not enough. IEC 60079-14 Section 9.3.2. States that: Cables for fixed installations – shall be: a) sheathed with thermoplastic, thermosetting, or elastomeric material. They shall be circular and compact. Any bedding or sheath shall be extruded. Fillers, if any, shall be non-hygroscopic; If cables do not pass one of these criteria and such cables link between a hazardous and non-hazardous area the result may be flammable gas, liquid or vapour migration through the interstices of unfilled cables to the inside of; for example, control room equipment. The situation is likely to be most acute with equipment installed in Zone 0 or Zone 1 locations (where the presence of a hazardous atmosphere has a greater likelihood and duration). If these conditions are likely to occur a barrier gland should be used.

TYPES OF BARRIER GLANDS Two Part Epoxy Based Putty For many years this was the only solution, it’s time consuming and reliant on accurate mixing and installation to get an effective seal to stop explosive gases and liquids diffusing down unfilled cables. If the putty isn’t mixed properly it can’t do its job and if it’s mixed properly but not accurately installed to fills all the voids properly again it won’t maintain a gas and liquid seal in case of an explosion. 32 | LIVEWIRE

Sachet Mix Liquid Pour Resin Although much faster than the putty option, this still takes almost twice as long as the CCG solution. The sachet mix pour resin has its on set of limitations, not least of which being the dependance on the installer to mix it properly before application into the gland. If the two part resin is not mixed properly, it can either go off too quickly or not set at all. CCG VORTex™ Injection Resin™ This instant mixing, injecting resin has all but eliminated the hassles surrounding the preparation, mixing and applying of compounds/resins in Barrier Glands. The VORTEx® Injection Resin® system is instantly and 100% accurately mixed whilst being simultaneously injected into the barrier gland in one single action. This reduces the installation time and gives an increased confidence in the installation compared to the epoxy putty or sachet mix liquid pour resins. The Injection resin flows into all the cable voids and interstices, completely filling the cable end. This forms a 100% barrier to any migration of explosive gases or fluids down the inside of an unfilled hygroscopic cable. VORTEx® Injection Resin® barrier glands are tested and fully comply with the latest IECEx standards and installation codes of practice. EX D EQUIPMENT: IEC 60079-14 Section 10.6.2 – requires the use of Barrier Glands for Ex d installations. Conventional flameproof Ex d cable glands with seals are designed primarily to retain the explosive pressure within an Ex d enclosure and prevent the passage of hot gasses through the cable entry to the surrounding atmosphere. The design of such cable glands relies on elastomeric seals sealing around the bedding of filled cable to perform this function. It has

Zone 1 Gas

been established that if cables are not effectively filled, substantially round and are hygroscopic, hot gasses and pressure produced by an explosion within an Ex d enclosure can bypass the protective elastomeric seals of a conventional Ex d Gland. These hot gases can be forced down the interstices of unfilled cable resulting in the potential damage to the cable and/or non-Ex d equipment. The use of barrier glands effectively blocks these explosive gases from migrating down interstices of unfilled cable.

IDEAL CODE CCG056001

Safe Area

BARRIER GLANDS ARE ALSO REQUIRED FOR THE FOLLOWING EQUIPMENT: Ex p Pressurized Equipment may also necessitate the use of Barrier Glands. Where necessary, to prevent the drop in pressure, the ingress of combustible gas or vapour by diffusion, or to prevent leakage of protective gas, wiring systems shall be sealed. If cables are not compact and filled barrier glands should be used. Ex nR IEC 60079-14 Section -10.8 states; “The sealing of restricted-breathing enclosures shall be such as to maintain the restricted breathing properties of the enclosure. Where the cable used is not part of the certificate and/or instruction manual and is not effectively filled, it may be necessary to use a cable gland or other method (e.g. epoxy joint, shrinking tube) which seals around the individual conductors of the cable to prevent leakage from the enclosure”.

LASERS MAXIMUM RUNTIME. UNCOMPROMISED VISIBILITY.

NEW

POWER & VISIBILITY 34 | LIVEWIRE

FAST SETUP

SUPERIOR CONTROL

HEAVY DUTY

DURABILITY

GREEN LASER TECHNOLOGY M12™ 3 Plane Laser

MLWM123PLA0C (Tool Only) • 15 hours of runtime on a single charge using M12™ REDLITHIUM™-ION 3.0Ah battery. • Visibility range of up to 38m. • High intensity green beams provide up to 4x the brightness compared to red lasers. • IP54 rating. • Pendulum Lock Mode. • 1/4" and 5/8" tripod thread and hang holes.

M12™ Cross Line + 2 Plumb Laser

REDLITHIUM™ USB Rechargeable Cross Line Laser Kit

REDLITHIUM™ USB Rechargeable 3 Point Laser Kit

REDLITHIUM™ USB Rechargeable Cross + 2 Plumb Laser Kit

MLWM12CPL0C (Tool Only) • 15 hours of runtime on a single charge using M12™ REDLITHIUM™-ION 3.0Ah battery. • Visibility range of up to 38m. • High intensity green beams provide up to 4x the brightness compared to red lasers. • IP54 rating. • 360° rotation that pivots on plumb point.

MLWL43PL301C

• 15 hours of runtime on a single charge using REDLITHIUM™ USB 3.0Ah battery. • Visibility range of up to 45m. • High intensity green beams provide up to 4x the brightness compared to red lasers. • IP54 rating. • Integrated magnetic bracket.

Laser Target

MLW48351111 • High visibility illumination. • Wide magnetic base suitable for floors and ferrous surfaces. • High contrast reflective surface for use with Milwaukee® lasers. • Responsive centering alignment. • Hang hole. • 1/4" and 1cm increments.

50m (165') Laser Detector MLW48351211 • Long distance alignment LED feedback. • Adaptable placement two magnetic sides. • IP54 Rating. • 1m impact resistance. • Adjustable audio: high, low, off. • Compatible with Milwaukee® Cross Line and Plane lasers.

MLWL4CLL301C • 8 hours of runtime on a single charge using REDLITHIUM™ USB 3.0Ah battery. • Visibility range of up to 30m. • High intensity green beams provide up to 4x the brightness compared to red lasers. • 1m drop rating. • IP54 rating. • Integrated magnetic bracket.

MLWL4CPL301C

• 8 hours of runtime on a single charge using REDLITHIUM™ USB 3.0Ah battery. • Visibility range of up to 30m. • High intensity green beams provide up to 4x the brightness compared to red lasers. • Manual Mode for use at any angle, Self-Levelling and Pendulum Lock Mode. • 1m drop rating. • IP54 rating.

360° Laser Bracket with Quick Connect MLW48351311 • Multi-plane rotational adjustment. • Maximum strength amplified rare earth magnets. • Adjustment lock. • Non-marring rubber pads. • Micro control: precise vertical alignment. • 1/4-20 and 5/8 - 11 thread mount. • Integrated screw and nail hang hole. • Compatible with Milwaukee® Cross Line and Plane lasers.

Laser Track Clip with Quick Connect MLW48351313 • Easy laser alignment, centering groove. • Low profile design. • Strong, secure grip. • Integrated screw and nail hang holes. • Rubber teeth. • Zip tie loops. • SAE and metric quick reference marks. • Compatible with Milwaukee® lasers.

All prices shown are inclusive of GST.

ARN-1782

RACKING NEW

PACKOUT™ Racking Shelf

MLW48228481 • E-Track is a standard anchoring system commonly used by many suppliers and brands to develop accessories and modular systems for material tie down and storage. • E-Track mounting rails will be able to mount horizontal and vertical. • Shelf holds up to 22.5kg.

PACKOUT™ Racking Kit

MLW48228480 • E-track is a standard anchoring system commonly used by many suppliers and brands to develop accessories and modular systems for material tie down and storage. • E-Track mounting rails will be able to mount horizontal and vertical. • Shelf holds up to 22.5kg.

PACKOUT™ Storage and Racking sold separately. Image for illustrative purposes only.

PACKOUT™ Customisable Work Top MLW48228488 • • • •

22.5kg weight capacity. Marine grade plywood. Clear coat finish provides smooth work surface. Impact resistant polymer construction to ensure durability.

PACKOUT™ 2-Wheel Cart

MLW48228415 • 181kg weight capacity. • Durable flat free wheels. • Tall tool storage. • Impact resistant polymer construction.

30+

SOLUTIONS ON ONE STORAGE SYSTEM

PACKOUT™ Dolly

PACKOUT™ Rolling Tool Box

PACKOUT™ Large Tool Box

PACKOUT™ Tool Box

PACKOUT™ Organiser

PACKOUT™ Compact Organiser

PACKOUT™ Low-Profile Organiser

PACKOUT™ Low-Profile Compact Organiser

PACKOUT™ Compact Tool Box

PACKOUT™ Hard Sided Cooler

PACKOUT™ Tote 381mm (15")

PACKOUT™ Backpack

MLW48228410 • 113kg weight capacity. • QUICKSTOP™ loading lever holds dolly securely during stacking. • Smooth roll wheels. • Impact resistant polymer construction. • Locking casters.

MLW48228425 • Impact resistant polymer construction. • Metal top handle: 45kg weight capacity. • IP65 rated seal: helps prevent damage from water and job site debris. • Internal organisation tray.

MLW48228430 • No travel bin seals: seals each bin. • IP65 rated seal: helps prevents damage. from water and job site debris. • Removable and mountable bins. • Impact resistant polymer construction.

MLW48228431 • Slim design for organisation of small items. • No-travel bins seal prevent small part migration between bins. • Reinforced hinge includes 8 small and 2 large bins. • IP65 rated weather seal. • Clear top for easy identification of contents.

MLW48228422 • Impact resistant polymer construction. • Interior storage tray. • IP65 rated seal. • Reinforced hinge. • 22kg weight capacity. • Internal organisation dividers. • Metal reinforced locking point heavy duty latches. • Mounting location inside lid for the ONE-KEY™ TICK™.

MLW48228315 • Impact resistant molded base. • Constructed with 1680D ballistic material for maximum durability. • Heavy duty zippers. • 28 total pockets. • Durable overmolded handle.

MLW48228426 • Metal through-axle for ultimate durability. • Industrial grade extension handle: supports up to 113kg. • 9" all terrain wheels. • Impact resistant polymer construction • IP65 rated seal: helps prevent damage from water and job site debris. • Metal reinforced corners.

MLW48228424 • Impact resistant polymer construction. • 34kgs weight capacity. • Internal organisation trays. • IP65 rated seal: helps prevent damage from water and job site debris.

MLW48228435 • No travel bin seals: seals each bin. • IP65 rated seal: helps prevents damage from water and job site debris. • Removable and mountable bins. • Impact resistant polymer construction.

MLW48228436 • Slim design for organisation of small items. • No-travel bins seal prevent small part migration between bins. • Includes 4 small and 1 large bin. • IP65 rated weather seal. • Heavy duty latches.

MLW48228460 • Impact resistant polymer construction. • Holds ice for up to 30 hours. • Interior storage tray. • Heavy duty latches. • Integrated top handle.

MLW48228301 • Tear-resistant 1680D ballistic material. • Impact resistant polymer base. • Hardshell electronics and equipment pocket. • 48 total pockets. • Reinforced side walls. • Daisy chains for additional storage. • Plastic reinforced jab saw pocket.

All prices shown are inclusive of GST.

ARN-1782

MONO-FACIAL ALL BLACK

100

390 WATT - N TYPE Tiling Ribbon (TR) Technology Positive power tolerance of 0~+3% • • • • • •

All-Black design blends aesthetically with modern roofs Industry leading 25 year product warranty N-Type cells feature lower degradation over time and better yield at high temperatures Tiling Ribbon (TR) technology improves efficiency 9BB (bus-bar) design minimises internal losses 2x 66 (132) cell design minimises losses from shading

LINEAR PERFORMANCE WARRANTY • 25 Year Product Warranty • 30 Year Linear Power Warranty • 0.4% Annual Degradation Over 30 years

IDEAL CODE

JNKJKM390N6RL3B

Learn More Here:

38 | LIVEWIRE

100

JINKO ALL BLACK SOLAR PANEL KIT DEALS! 6KW GRIDTIE KIT

6KW HYBRID KIT WITH 4KW BATTERY

PACK INCLUDES

IDEAL CODE

DESCRIPTION

IDEAL CODE

DESCRIPTION

JNKJKM390N6RL3B

Jinko 390W all-black solar panel x 16

JNKJKM390N6RL3B

Jinko 390W all-black solar panel 35mm x 16

SGWSG5KDP

Sungrow PREMIUM 5kW inverter

SGWSH5K30

SGWS100

Sungrow energy meter

Sungrow hybrid 5kW 2-MPPT 1ph with EPS includes S100

MLC320712320713

MC4 plug & socket

BYDLVS4.0

IESKNS03

Gridtie warning label kit

BYD low voltage 4.0kWh battery module IP55

CLNERRECO4400BA

Clenergy 4.4m rail - black

BYDLVSPDU

BYD low voltage Power Distribution Unit for LVS

CLNKSRECO05430B

Tin roof kit 4 panels 35mm - black

BYDLVSBMU

BYD low voltage Battery Management Unit & Base IP55

MLC320712320713

MC4 plug socket pair

IESKNS03

Warning label kit - gridtie

IESKLIB01

Warning label kit - lithium hybrid

CLNERRECO4400BA

Clenergy 4.4m rail - black

CLNKSRECO05430B

Tin roof kit 4 panels 35mm - Black

FROM

5999

ADD CATCHPOWER HOTWATER DIVERSION CONTROLLER

499

100

FROM CPGCATCHGREEN

11,399

T&CS; Promo period 13 Sept - 31 October 2021. Does not include AC or DC cable or Conduit and sundries such as Saddles, Screws, Cable Ties, Glue, Sealant, Glands, etc. AC isolator required if inverter is not installed adjacent MSB. Lines approval + Installation + COC + Inspector ROI + Meter change by client. Customer to connect inverter to Router for monitoring. Subject to stock availability at time of order.

I choose the Marley ARMA ® Rigid Conduit system because it ticks all the boxes for durability, compliance and craftmanship-like finish. It helps me be proud of each and every job I complete. Cameron Shailer, Registered Electrician

HIGH GLOSS FINISH

COLOUR MATCH

EXTENSIVE FITTINGS RANGE

QUALITY OF CUT

MARLEY POWER DUCT SERIES Why Heavy Duty Ducting is Best Practice For underground installations where there is no surface covering, Category A underground wiring systems will deliver significant labour, time and cost savings with simplified installation compared to Category B. Shallower and narrower trench, faster backfilling and no additional mechanical protection required. Critically, the longer the trench the greater the savings.

Marker Tape

Mechanical protection system - must overlap the wiring system by at least 40mm either side, and not less than 150mm wide

CATEGORY A SYSTEM Marley Power Duct System (Heavy Duty) where NO ADDITIONAL mechanical protection is required

CATEGORY B SYSTEM Marley Power Duct System (Medium Duty) where ADDITIONAL mechanical protection is required

Timers and contactors

Large choice Our time switches and delay timers cover all your applications from simple controls to advanced processes such as irrigation that may require devices with software pre-programming, several programming steps (up to 300) and multiple channels control. In association with modular contactors, it ensures long life span with consideration of the operating temperature, the type of loads to control and the expected number of operations. hagerelectro.com.au

IDEAL lighting SOLUTIONS

NHP SHEDS LIGHT ON HAZARDS PAGE 58-60

LED STRIP LIGHTING

PAGE 68

PLUS NEWS, PRODUCT RANGES & INFORMATION GUIDES FROM IDEAL ELECTRICAL SUPPLIERS

SEPT 2021

IDEAL Lighting Solutions

Contents p46-47

p48-49

p49-51

BULKHEADS & HIGHBAYS

OYSTERS & PENDANTS

UP & DOWN WALL LIGHTS

p52-57

p58-60

p61-64

BATTENS & EMERGENCY

NHP SHEDS LIGHT ON HAZARDS

LANDSCAPE LIGHTING

p65-67

p68-69

p70-71

BATHROOM & STAIR LIGHTING

LED STRIP LIGHTING

RAYTECH EMERGENCY LIGHTING

ARTICLE

TRANSFORM EXISTING DIMMABLE LIGHT FITTINGS TO WI-FI CONTROLLABLE WITH THE

ROBUS RX CONNECT WI-FI DIMMER 3

YRS

NOW IN STOCK ROBUS BY LED GROUP

NEW ZEALAND OFFICE THE LED GROUP NEW ZEALAND LTD T. +64 3 668 5285 E. NZ_PURCHASES@ROBUS.COM

44 |

IDEAL Lighting Solutions 2021

AUSTRALIA OFFICE SUITE B, 2 PITTWIN ROAD CAPALABA QLD 4157 AUSTRALIA T. +61 7 3890 5444 E. PURCHASES@ROBUS.COM

HEAD OFFICE NANGOR ROAD, DUBLIN 12, D12 E7VP, IRELAND T. +353 1 709 9000 F. +353 1 709 9060

IP44

splash proof

10.5W

1,000 lumens

120mm cut out

Tri Colour

3K/4K/ 6K

THE KING DOWNLIGHT 10W D120 LED10 COLOUR PHIDN021B10D120 IP44

splash proof

7.5W

800

lumens

90mm cut out

Tri Colour

3K/4K/ 6K

THE KING DOWNLIGHT 7W 90 LED8 COLOUR PHIDN021B7D90

“Whether we like it or not, our children are aware their mates are having problems, some of which are very serious. Currently, 80% of kids in crisis don’t ask for professional help. This is an Ideal opportunity for you to shine a light on a dark place for our kids” - Mike King

Bulkheads

RX BASIC BULKHEAD OVAL & ROUND

• 3000K/4000K/5000K • Non dimmable • Black or White

REXBHD12RDCCT

IDEAL CODE

WATTAGE

DIMENSIONS

LUMEN O/P

REXBHD12OVCCT

12W

230mm x 105mm x 60mm

950lm

REXBHD12RDCCT

12W

211mm x 211mm x 63mm

950lm

REXBHD8OVCCT

200mm x 100mm x 60mm

650lm

REXBHD12OVCCT

RX TYPHOON BULKHEAD ROUND FLUSH & TRIMS

• • • • • • • •

19W 4000K 1600lm Microwave Sensor Non dimmable Grey Trim Covers available in Grey Diameter: 350mm

REXBHR19W4KG

IDEAL CODE REXBHR19W4KG REXBHR19W4KMG REXBHREYETRM (Trim Cover Only) REXBHRGRLTRM (Trim Cover Only)

46 |

IDEAL Lighting Solutions 2021

REXBHREYETRM

REXBHRGRLTRM

Highbays

KAI HIGH BAY 150W

• Food Grade • Non dimmable

REXHB06150W

IDEAL CODE

WATTAGE

COLOUR

DIMENSIONS

LUMEN O/P

REXHB06150W

150W

Gloss Grey

489mm diameter

19362lm

HIPRO HIGHBAY & ACCESSORIES

• 0-10v • Non dimmable

90 Degree Ali Reflector

PC Reflector with Diffuser

REXHB90ALIREF

REXHBPCREFDIF

Adjustable Bracket for HB12 Daylight and Occupancy Remote Control Sensor REXHBADJBKTHB12 REXHBSENSOR2

65 IDEAL CODE

WATTAGE

COLOUR

DIMENSIONS

LUMEN O/P

REXHB12150W

150W

Black

292mm diameter

22500lm

REXHB12200W

200W

Black

292mm diameter

30000lm

Hipro Highbay Safety Chain only 1.5m REXHBSCHAIN1.5M

IDEAL Lighting Solutions 2021

| 47

Oysters

SELENE OYSTER LED

• • • • • • • • • • •

Slim Profile from only 40mm deep IP54 Suitable for use in Bathrooms For indoor use only Dimmable and available in three wattages 12W, 18W, and 30W Sensor versions available in 12W Colour Temp: 3000K/4000K/5700K available in 18W & 30W Triac dimmable Uniform light on the surface Up to 70% savings in energy compared to traditional lamps sources Easy Fix Bracket system allows for quick installation Lifetime: 40,000hrs

• ROUND DIMENSIONS: 300mmx 40mm 300 mm x 48 mm (CCT changeable version) • SQUARE DIMENSIONS: 12W - 250mm x 250mm x 40 mm 18W - 300mm x 300mm x 40 mm 30W - 400mm x 400mm x 51 mm

48 |

IDEAL CODE

SHAPE

WATTAGE

COLOUR TEMP

REXSEL18WCCTDIM

Round

18W

3000K, 4000K, 5700K

REXSEL30WCCTDIM

Round

30W

3000K, 4000K, 5700K

REXSEL12WWWSQ

Square

12W

3000K

REXSEL12WCWSQ

Square

12W

4000K

REXSEL18CCTSQ

Square

18W

3000K, 4000K, 5700K

REXSEL30CCTSQ

Square

30W

3000K, 4000K, 5700K

IDEAL Lighting Solutions 2021

Pendant & Up/Down Wall Lights

PD02 CYLINDRICAL PENDANT

• • • •

Non-dimmable Lifetime: 40,000hrs Lumen Output: 860-1840lm Diameter: 80mm

IDEAL CODE

COLOUR

SIZE

VOLTAGE

WATTAGE

COLOUR TEMP

REXPD218W364KBK

Black

80mm x 136mm

230V

18W

4000K (Cool White)

REXPD210W364KWH

White

80mm x 136mm

230V

10W

4000K (Cool White)

REXPD210W364KBK

Black

80mm x 130mm

230V

10W

4000K (Cool White)

REXPD210W363KWH

White

80mm x 130mm

230V

10W

3000K (Warm White)

REXPD210W363KBK

Black

80mm x 130mm

230V

10W

3000K (Warm White)

LILLY LED UP-DOWN WALL LIGHT

• • • •

Lumen Output: 400lm Non-dimmable Lifetime: 25,000 hrs 7W, 230V

IDEAL CODE

COLOUR TEMP

EDGE

REXUDGL27WWHCW

4000K (Cool White)

Square Edge

REXUDGL27WWHWW

3000K (Warm White)

Square Edge

REXUDGL37WWHWW

3000K (Warm White)

Round Edge

REXUDGL37WWHCW

4000K (Cool White)

Round Edge

IDEAL Lighting Solutions 2021

| 49

Up/Down Wall Lights

RX WALL WASHER

• • • •

Non dimmable White Lifetime: 30,000hr Beam Angle: 45°

20 IDEAL CODE

WATTAGE

DIMENSIONS

LUMEN O/P

REXWL21LED

35W

595mm x 226mm

4140lm

CARA

• • • • • • •

Surface mounted 3000K, 4000K, 5500K 2x 4.5w Built in LED 240v AC Non Dimmable Dimensions (mm): 200(W) 110(H) 53(D) Beam Angle: 120°

50 |

IDEAL CODE

COLOUR TEMP

LUMEN O/P

HAV35022TWHT

3000k 4000k 5500k

2x 250lm 2x 300lm 2x 280lm

HAV35022TBLK

3000k 4000k 5500k

2x 250lm 2x 300lm 2x 280lm

IDEAL Lighting Solutions 2021

Up/Down Wall Lights

SAVANNAH

• • • • • • •

Surface mounted 3000K, 4000K, 5500K 2x 4.5w Built in LED 240v AC Non Dimmable Dimensions (mm): 180(H) 102(D) ∅90 Beam Angle: 60°

3K IDEAL CODE

COLOUR TEMP

LUMEN O/P

HAV3635TWHT

3000k 4000k 5500k

2x 225lm 2x 230lm 2x 235lm

HAV3635TBLK

3000k 4000k 5500k

2x 225lm 2x 230lm 2x 235lm

LISSE

• • • • • • •

Surface mounted 3000K, 4000K, 5500K 2x 3w Built in LED 240v AC Non Dimmable Dimensions (mm): 115(W) 90(H) 28(D) Beam Angle: 120°

3K IDEAL CODE

COLOUR TEMP

LUMEN O/P

HAV3642TWHT240V

3000k 4000k 5500k

2x 240lm 2x 250lm 2x 260lm

HAV3642TBLK240V

3000k 4000k 5500k

2x 240lm 2x 250lm 2x 260lm

IDEAL Lighting Solutions 2021

| 51

Battens

FASTSET BATTEN

• One luminaire which is suitable for standalone or line configuration • Good light quality and comfort thanks to its wide distibution • With three push-in terminal blocks to choose from and two different mounting methods it’s a breeze to install • IP44 rating makes the FastSet resilient against moisture and dust • Three year warranty

IDEAL CODE

WATTAGE

LENGTH

DIMENSIONS (MM)

LUMEN O/P

PHISM150484FT

45W

4ft

160 (W) 61 (H)

4800lm

PHISM150485FT

55W

5ft

160 (W) 61 (H)

6000lm

LED CORELINE BATTEN

• Surface mount with no visible brackets • Included joiner plate for economical continous lighting applications for two or more battens • Excellent replacement for T8 and older battens • IK03 • 4ft & 5ft options • Interior use only

52 |

IDEAL CODE

WATTAGE

LENGTH

DIMENSIONS (MM)

LUMEN O/P

PHIBN12641L8404

40w

4ft

65 (W) 65 (H)

4100lm

PHIBN12641L8654

40w

4ft

65 (W) 65 (H)

4100lm

PHIBN12660L8405

60w

5ft

65 (W) 65 (H)

6000lm

PHIBN12660L8655

60w

5ft

65 (W) 65 (H)

6000lm

IDEAL Lighting Solutions 2021

CoreLine Batten Innovative Easy to install High quality

Lower standards or raise the bar? CoreLine Slim batten deliver superior performance, output and energy efficiency in an affordable package. It is the perfect retrofit solution for conventional battens. With a Slim base and no visible mounting brackets, replacement of an existing batten has never been so easy. The Range Excellent replacement for T8 and older battens Available in 5ft,4ft & 2ft lengths in both 4000K & 6500K Surface mount with no visible brackets Emergency options available (AS2293 compliant)

Unique Ease of use features Toolless, pop on/pop off cover for fast installation Hooked front cover for easy removal & re-installation Push out tabs for suspended mounting End plates pre-punched for glanded entry Unique concatenate plate for simple continuous linear lighting installation

IDEAL Lighting Solutions 2021

| 53

EASY TO INSTALL

COST EFFECTIVE

LED EDGELIGHT EXIT

3 3 YEAR WARRANTY

LED EXIT

DESIGNED IN AUSTRALIA

50,000 HRS LED LIFE

LED SATELLITE

LED SURFACE SATELLITE

IDEAL CODE

LEG659624LI

LEG685100LI

LEG685102LI

LEG659630LI

LED TWINSPOT

LED WEATHERPROOF BATTENS

IDEAL CODE

DESCRIPTION

IDEAL CODE

DESCRIPTION

IDEAL CODE

LEG659610

4 FOOT MAINS

LEG659608

2 FOOT MAINS

LEG659623LI

LEG659528LI

4 FOOT EMERGENCY

LEG659526LI

4 FOOT EMERGENCY

www.legrand.co.nz

INTRODUCING LEGRAND’S ECONOMY EMERGENCY LIGHTING:

A SIMPLE, COSTEFFECTIVE SOLUTION FOR SAFETY AND COMPLIANCE. Capitalizing on more than 45 years’ experience in delivering innovative emergency lighting solutions to the New Zealand market, Legrand has recently introduced its new Emergency Lighting – Economy Series, a range of economy products designed for everyday applications including smaller new installations, and replacement/maintenance of existing projects. James Oloi, Legrand NZ, National Business Development Manager and Lighting Council New Zealand Representative comments, “Legrand’s Economy Series is a simple, cost effective solution for achieving safety and compliance. It’s perfect for wholesalers to hold in stock so Electrical Contractors can drop in to their local Ideal Electrical and pick up the right emergency light fitting off the shelf, at the same time as you pick up your switches, sockets and cable supplies for the job”. James adds, “As a part of the offer, Legrand has also created a universal one-box solution that includes all of the Exit sign decals so you can create a single or a double Exit sign with all the directional variations covered. Plus, the satellite has a large ring to cover the existing hole to reduce or eliminate damage to paintwork. This means that Contractors are able to minimize the stock that they’re holding in their van”. Backed by Legrand’s inhouse team of lighting experts and qualified lighting design engineers, Ideal Electrical’s specialist lighting team is able to assist you with selecting the right economy solutions to ensure your project complies with New Zealand standards.

ECONOMY WITHOUT COMPROMISE Manufactured with the same Industry leading LED technology that you’ll find in Legrand’s premium range of Emergency Lighting, the Economy Series offers a three-year warranty, 50,000 hours of LED life and Lithium batteries designed to lengthen the life of the emergency light and reduce maintenance costs. Legrand’s Economy Series is locally designed and manufactured in Australia

to meet our local standards, is environmentally friendly and energy efficient with 1-3W energy consumption. The range includes: 1. LED Edge light Exit Sign This can be single or double sided with drop in decals. It has been designed for walls or ceilings and recessed or surface mounted with a 24-meter viewing distance making it ideal for general office applications. There is a large terminal box and a slide bracket for easy installation. Accessories include a wire suspension kit, a rod suspension kit and a weatherproof enclosure for outdoor installations. 2. Economy LED Satellite. Designed for recess installation it has a D40 classification, spring clips and comes complete with flex and plug and a large trim. . 3. Surface LED Satellite. Suitable for walls or ceilings with a D40 classification, robust steel construction and a large terminal block, energy efficient. 4. LED Twinspot. For surface mount installation with 2x180LM light output, Ip65 ingress protection, IK07 impact rating, adjustable spotlight head, wire guard accessory available. 5. Weatherproof LED Battens. Designed for use as mains or emergency lighting with an optional on/off sensor the weatherproof LED Battens can be installed on wall or ceilings. The battens come in three lengths (2-foot, 4-foot and 5-foot), 400K LED, colour temperature, IP65 ingress protection, IK08 impact rating and an optional on/off sensor.

SEPTEMBER - OCTOBER 2021 | 55

Emergency

ECONOMY LED EDGELIGHT EXIT SIGN

• Complete with running man decals • Lithium battery • Lifetime: 50,000 hrs

IDEAL CODE

WATTAGE

COLOUR

LEG659624LI

White Finish

LEG659624LI

ECONOMY LED EXIT SIGN

• Complete with running man decals • Lithium battery • Lifetime: 50,000 hrs

LEG685100LI

IDEAL CODE

WATTAGE

COLOUR

LEG685100LI

3.5W

White Finish

ECONOMY LED SATELLITE ECONOMY LED

• D40 flex & plug • Lithium battery • Lifetime: 50,000 hrs

56 |

IDEAL CODE

WATTAGE

COLOUR

LEG685102LI

White Finish

IDEAL Lighting Solutions 2021

LEG685102LI

Emergency

ECONOMY LED TWINSPOT ECONOMY LED

• Adjustable heads • Lithium battery • Lifetime: 50,000 hrs

LEG659623LI

IDEAL CODE

WATTAGE

COLOUR

LEG659623LI

3.5W

White Finish

MAINS & EMERGENCY ECO WEATHERPROOF LED BATTEN

• Water resistant • Lithium battery • 2 Foot & 4 Foot

LEG659608

IDEAL CODE

WATTAGE

DIMENSIONS

LUMEN O/P

LEG659608

23W

2ft

2100lm

LEG659526LI

23W / 3W EM

2ft

470lm EM Mode

LEG659610

47W

4ft

4600lm

LEG659528LI

47W / 7W EM

4ft

1220lm EM Mode

FEATURE

Emergency model switched maintained

IDEAL Lighting Solutions 2021

| 57

NHP PAINTS A CLEAR PICTURE FOR LIGHTING NEEDS Introduction In line with their commitment to continuous improvement, a global leader in the coatings industry recently undertook a lighting upgrade that brought together the local expertise and quality product offering from NHP and contractor, CJ Pearce. The facility forms one of the End User’s two paint factories in Australia, with another located in New Zealand, all strategically located to service the Australasian market. This particular site is used to manufacture water-based and solvent-based paints for both household and industrial applications and as such, the facility houses a number of flammable raw materials that are used throughout the production process.

Project Overview With this in mind, the facility is classified as a Zone 1 hazardous environment so when it came to a lighting upgrade for the production and filling floors at the facility towards the end of 2016, there were a number of factors to consider for the End User when choosing a supplier for the project with local contractor CJ Pearce.

This sample proved to be very beneficial for the Engineering Manager and upon delivery of the lighting design, which included 48 of the Cortem EVL100 hazardous area floodlights (down from 70 general purpose lights that were currently in use), NHP were also able to offer a 5 year warranty. “Having the product sample was a great advantage for us when it came to making the decision on a supplier. Having already used other Cortem products in different areas of the site we already trusted the brand and when it was backed by the warranty and NHP’s local support, our decision was made easy,” he said. Once the decision was made, NHP were able to deliver all 48 lights in one single delivery which enabled CJ Pearce to install them inside three days during the Christmas shutdown, which minimised production disruption and downtime. “As well as now being compliant with standards, since the new lights have been installed we’ve experienced greater light output that as well as being safer, has greatly benefitted our equipment operators,” he continued.

“The lighting that was previously used was general purpose lighting and as well as not complying with hazardous requirements, it also presented output and performance issues that led to the requirement of ongoing maintenance that was that was not only costly and inefficient but also presented safety concerns,” - said the Engineering Manager for the End User. “Working with CJ Pearce who we have a long-standing relationship with, we chose NHP to deliver a lighting solution using their Cortem range of hazardous area lighting after a detailed tendering process,” he continued. During this tendering process NHP were contacted by CJ Pearce and asked to visit the facility to assess the needs and propose a suitable solution. As part of this visit, NHP performed a number of tests using a lux level tester and from there, were able to prepare a detailed lighting design that featured the Cortem range of EVL100 hazardous area lighting fixtures.

The Solution Complementing the completed lighting design, NHP also provided a sample of the product for the End User to familiarise with and asses before making their decision.

Above: The cortem EVL100 Hazardous Area floodlights used in the project.

Case studies

58 |

IDEAL Lighting Solutions 2021

Case studies

Project Fact File Project: Hazardous Area Lighting Upgrade Location: Melbourne, Victoria Details: The End User’s manufacturing facility recently undertook a lighting upgrade that brought together the local expertise and quality product offering from NHP and contractor, CJ Pearce. NHP Products/Services: • • •

Cortem EVL100 hazardous area floodlights Lighting Design Local service and support

IDEAL Lighting Solutions 2021

| 59

Hazardous Area Led Lighting certified to AS2293.3

In accordance with the Australian National Construction Code (NCC) - Volume One, Part E4, and the New Zealand Building Code, Clause F6, where a Deemed-to-Satisfy Solution is proposed, every required emergency lighting system must comply with AS 2293.1.

This means that emergency luminaires which comply to AS 2293.3 and are used as part of an AS 2293.1 system, will satisfy the respective performance requirements of the NCC.

EXEL-L LED LINEAR EMERGENCY LIGHTING • Comes with dual terminal blocks and dual brass earthing plates for through wiring • 4 x M20 entries included, 3 with prefitted certified plugs

EXEL230LEF4AU

EXEL215LEF4AU

INDENT ITEM

WATTAGE

DISCHARGE TIME

LUMEN O/P

EX ZONES

EXEL230LEF4AU

56W

120’

5637

1,2,21,22

EXEL215LEF4AU

29W

180’

2850

1,2,21,22

1 | IDEAL Lighting Solutions 2021 60 | IDEAL Lighting Solutions 2021

IDEAL Lighting Solutions 2021

| 1

Landscape Lighting

CONNECT OPTIONS

• • • • • •

Beam Angle: 18° Lifespan: 35,000hrs Dimensions: 60mmØ x 84.5mm high, Ø50mm cut out IC rated Driver sold separately (Constant Voltage 24V) Wiring accessories available

HALEX143COL

HALEX143STSL

HALEX143PH

HALEX143AH

3K IDEAL CODE

WATTAGE

COLOUR

LUMEN O/P

HALEX143STSL

3.6W

S/Steel

305lm

HALEX143COL

3.6W

Copper

305lm

IDEAL CODE

HOUSING FOR

MATERIAL

HALEX143PH

EX143/144/145/146/147

Plastic - Blk

HALEX143AH

EX143/144/145/146/147

Plastic - Blk

DECK LIGHT 8 PACK

• • • • • •

Dimensions: 35mmØ x 29mm high Cut out: 30mm Beam Angle: 120° IC rated For recessed installation into decking/roofing only Driver included, pre-wired with 2 pin plug and IP65 quick connect secondary • Non-dimmable

IDEAL CODE

WATTAGE

LIFESPAN

HALR895STS8K

0.5W

30,000hrs

IDEAL CODE

DESCRIPTION

HALR895LC1.5M

1.5m Loop/Extension Cable

HALR895LC3M

3m Loop/Extension Cable

ALR895STS8K

IDEAL Lighting Solutions 2021

| 61

Landscape Lighting

EXTERIOR SURFACE MOUNT SENSOR SPOT DESIGN SERIES 8W/2X 8W

• • • • • • • •

50,000 hour lifespan 50° beam angle 90° tilt angle 350° tilt angle Driver incorporated, dimmable Adjustable Passive Infrared Motion Thermal and Daylight sensor incorporated 15°, 24° and 36° lens accessories also available

HALEX260B3

HALEX260W3

HALEX261B3

3K IDEAL CODE

WATTAGE

COLOUR

DIMENSIONS

LUMEN O/P

HALEX260B3

Black

Base: L110 x W90 x D35mm, Spot: D55 x L110mm

570lm

HALEX260W3

White

Base: L110 x W90 x D35mm, Spot: D55 x L110mm

570lm

HALEX261B3

2x 8W

Black

Base: L100 x W130 x D35mm, Spot: D55 x L110mm

2 x 570lm

HALEX261W3

2x 8W

White

Base: L100 x W130 x D35mm, Spot: D55 x L110mm.

2 x 570lm

HALEX260W3

SUNSYNK ECLIPSE ALL-IN-ONE SOLAR LED LIGHTS

• Uses renewable and free solar power • Illumination of up to 10 hours depending on the amount of triggers • Battery Management System to deliver efficient operation • Courtesy light activated all night • Full output PIR movement activated • Aluminium alloy shell structure is lightweight, corrosion resistant and weatherproof • Secondary (remote) solar panel included if aiming of the light restricts optimum charging

62 |

IDEAL CODE

NTEGRAL/SECONDARY SOLAR PANEL

WATTAGE

LUMEN O/P

RUN TIME

SMXLHT2001

4W, 11.5V / 6W, 13V

470lm

10 hrs

SMXLHT2002

5.5W, 12V / 6W, 13V

12W

470lm

11 hrs

SMXLHT2003

6.5W, 12V / 6W, 13V

24W

470lm

11 hrs

SMXLHT2004

10W, 17.5V / 6W, 18V

36W

470lm

10 hrs

IDEAL Lighting Solutions 2021

Landscape Lighting

HAVIT DAVID SQUARE/ROUND LED BOLLARD LIGHT 12W/24W

• 3000K, 4000K, 5500K • Built in 24W driver

3K IDEAL CODE

WATTAGE

VOLTAGE

DIMENSIONS

SHAPE

LUMEN O/P

HAV1628TBLK240S

12W

240V

600mm

Square

960-1080lm

HAV1629TBLK240S

12W

240V

1000mm

Square

960-1080lm

HAV1628TBLK24R

12W

24V DC

600mm

Round

960-1080lm

HAV1629TBLK24R

12W

24V DC

1000mm

Round

960-1080lm

HAV1629TBLK24R

HAV1629TBLK240S

HAVIT HIGHLITE

• 3000K, 4000K, 5500K • Built in 24W driver

3K IDEAL CODE

WATTAGE

VOLTAGE

DIMENSIONS

SHAPE

LUMEN O/P

HAV1625TBLK240V

24W

240V

600mm

Round

1900-2040lm

HAV1626TBLK240V

24W

240V

1000mm

Round

1900-2040lm

HAV1629TBLK240S

IDEAL Lighting Solutions 2021

| 63

Landscape Lighting

LED EXTERIOR DECK / INGROUND UPLIGHT

• • • • • •

Lifespan: 35,000hrs Dimensions: 60mm Ø x 97mm high, Cut out: 50mm IC rated Driver sold separately (Constant Voltage 24V) Wiring accessories available Copper / 316 STS HALEX144STSL

IDEAL CODE

WATTAGE

COLOUR

BEAM

LUMEN O/P

HALEX144STSL

3.6W

S/Steel

Single

30lm

HALEX144COL

3.6W

Copper

Single

30lm

HALEX145STSL

3.6W

S/Steel

Twin

30lm

HALEX145COL

3.6W

Copper

Twin

30lm

HALEX146STSL

3.6W

S/Steel

Triple

30lm

HALEX146COL

3.6W

Copper

Triple

30lm

HALEX147STSL

3.6W

S/Steel

Quad

30lm

HALEX147COL

3.6W

Copper

Quad

30lm

HALEX145COL

HALEX146STSL

HALEX147COL

HALEX143PH

HALEX143AH

3K IDEAL CODE

HOUSING FOR

MATERIAL

HALEX143PH

EX143/144/145/146/147

Plastic - Black

HALEX143AH

EX143/144/145/146/147

Aluminium

24V DRIVERS

• Universal AC Input / Full range • Captured terminal screws • Constant Voltage [Parallel Circuit]

64 |

• SELV Equivalent • Operating temp range -20 +50°C

IDEAL CODE

WATTAGE

AMPS

HALDRIPCV2440W

0-40W

0-1.67A

HALDRIPCV2475W

0-75W

0-3.15A

HALDRACV24150W

0-150W

0-6.25A

HALDRACV24200W

0-200W

0-8.34A

HALDRACV24320W

0-320W

0-13.3A

IDEAL Lighting Solutions 2021

HALDRIPCV2440W

Bathroom Lighting

BLADE/SLIM BATHROOM LIGHT 18W/24W/27W/36W

• • • • •

50,000 hour lifespa 180° beam angle 350° tilt angle Driver incorporated Non-dimmable

HALS501B3K*

HALS501W3K*

HALS506B3K

3K IDEAL CODE

WATTAGE

COLOUR

DIMENSIONS

LUMEN O/P

HALS501B3K*

18W

Black

L600 x D100 x H42mm

1700lm

HALS501W3K*

18W

White

L600 x D100 x H42mm

1700lm

HALS502B3K*

24W

Black

L600 x D100 x H42mm

2150lm

HALS502W3K*

24W

White

L600 x D100 x H42mm

2150lm

HALS503B3K*

36W

Black

L1200 x D100 x H42mm

3220lm

HALS503W3K*

36W

White

L1200 x D100 x H42mm

3220lm

HALS506B3K

18W

Black

L600 x D115 x H40mm

1600lm

HALS506W3K

18W

White

L600 x D115 x H40mm

1600lm

HALS507B3K

27W

Black

L600 x D115 x H40mm

2550lm

HALS507W3K

27W

White

L600 x D115 x H40mm

2550lm

HALS508B3K

36W

Black

L1200 x D115 x H40mm

3000lm

HALS508W3K

36W

White

L1200 x D115 x H40mm

3000lm

HALS506W3K

* Suitable for both vertical and horizontal orientations

IDEAL Lighting Solutions 2021

| 65

Stair Lighting

ROUND & SQUARE DARKLIGHT / RECESSED WALL/CONCRETE

• 3W. 160 lumens. • 24V Constant Voltage. • Round (EX900) - D90 x H36mm. Concrete housing: D76 x H66mm. Ø72mm cut out (Ø 76mm if using housing). • Square (EX901) – L90 x W90 x D36mm. Concrete housing: L83 x W83 x D66mm 72 x 72mm cut out (83 x 83mm if using housing) • 2700K Ultra Warm White. 40000hr lifespan. • 120° beam angle. IP65. IC Rated. • Driver not included, Current draw 0.13A per fitting. • Interior / Exterior recessed wall, comes complete with plastic housing accessory for concrete installation. • 5 Year Warranty

IDEAL CODE

DESCRIPTION

COLOUR

HALEX900B3

Round

Matte Textured Black

HALEX900W3

Round

White

HALEX901B3

Square

Matte Textured Black

HALEX901W3

Square

White

ROUND & SQUARE LOW GLARE DARKLIGHT WALL / STAIR TREAD

• • • • • • • • •

3W. 95 lumens. 700mA Constant Current. Round - D78 x H38mm Square - L78 x W78 x D38mm Ø65mm cut out. 3000K Warm White. 30000hr lifespan. 60° beam angle. IP65. IC Rated. Driver not included. Concrete installation plastic housing also available (sold separately). • Interior / Exterior recessed wall/stair lighting • Suitable for zero clearance installs. Shallow profile. • 5 Year Warranty.

IDEAL CODE

66 |

DESCRIPTION

COLOUR

HALR935BSL3

Round

Brushed 316 Stainless Steel

HALR935WL3

Round

White Aluminium

HALR936BSL3

Square

Brushed 316 Stainless Steel

HALR936WL3

Square

White Aluminium

IDEAL Lighting Solutions 2021

65mm

Stair Lighting

ROUND EYELID WALL / STAIR LIGHT

• • • • • • • • • •

1.2W. 90 lumens. 350mA Constant Current. D80 x H35mm. Ø60mm cut out. 3000K Warm White. 50000hr lifespan. IC Rated. Driver sold separately. Interior wall, stair and effect lighting. Suitable for zero clearance installs. Shallow profile. 5 Year Warranty.

IDEAL CODE

COLOUR

HALR914BAL

Brushed Aluminium

HALR914BL

Black

HALR914SL

Silver

HALR914WL

White

3000K

60mm

SQUARE EYELID WALL/STAIR LIGHT

• • • • • • • • • •

1.2W. 90 lumens. 350mA Constant Current. L80 x W80 x D35mm. Ø60mm cut out. 3000K Warm White. 50000hr lifespan. IC Rated. Driver sold separately. Interior wall, stair and effect lighting. Suitable for zero clearance installs. Shallow profile. 5 Year Warranty.

IDEAL CODE

COLOUR

HALR915BAL

Brushed Aluminium

HALR915BL

Black

HALR915SL

Silver

HALR915WL

White

3000K

60mm

IDEAL Lighting Solutions 2021

| 67

LED Strip Lighting

LED STRIP OR LED RIBBON HAS BECOME A MAINSTREAM LINEAR LIGHTING OPTION IN MOST NEW BUILDS AND RENOVATIONS. TO MEET THIS DEMAND TASK LIGHTING OFFERS A WIDE RANGE LED STRIPS, PROFILES AND DRIVERS CARRIED AS STOCK IN MOST IDEAL ELECTRICAL STORES THROUGHOUT NEW ZEALAND.

Where To Use Profiles & LED strips

Choosing Drivers & Controllers

Kitchens, laundries, bathrooms, bedrooms, lounges, etc.

Once a strip is chosen TASK’s free strip load calculator can be used to determine the load and current. Follow the link below which can be setup on phones and tablets or work directly on a desk top PC. Http://apps.tasklighting.co.nz/

Under toe kicks… use surface mount profile DSCHAN100OL with a 4.8W/m LED strip which is usually warm white (3000K) in residential projects Under cabinets /over benches… use recessed profiles DSCHAN120OL or DSCHAN140OL If recessing isn’t possible then surface mount profiles DSCHAN110OL or DSCHAN130OL Usually under cabinets 9.6W/m or 15W/m would be used to light up the working surface underneath. In bathrooms… Task Lighting Vanity packs can be used under wall hung vanity’s or vanity toe kicks in DSCHAN110OL profile as a night light. The Vanity packs come in 3 sizes, 500mm, 800mm & 1100mm in IP66 with pre-wired clear tails to suit most vanities. All strip packs, profiles, profile endcaps & drivers are all labelled on the TASK product stand. Strips are labelled by colour, W/m and length making selection easy.

68 |

LOCATION

W/M

Toe Kicks

Once the load is calculated add 10% and then choose the next largest driver. Drivers options include mains dimmable. Drivers need ventilation and should not be covered with insulation or located in wall cavities etc. The strip load calculator also determines the current for choosing control items such as low voltage dimmers & colour changing controllers which have a max current rating.

Customised Solutions Where longer, continuous profile lengths are required 4m lengths are available and can be cut to size. Larger profiles and high power strips are also available for general lighting projects. Talk to the Ideal team for advice on how Task Lighting can support you with all your LED strip lighting projects both large and small.

PROFILES OPTIONS SURFACE MOUNT

RECESSED

4.8

DSCHAN110OL DSCHAN200OL

DSCHAN120OL

Under Cabinets & Over Benches

9.6 14.4

DSCHAN110OL DSCHAN130OL

DSCHAN120OL DSCHAN140OL

Under Vanities **

4.8

DSCHAN110OL DSCHAN200OL

DSCHAN120OL

Coves

9.6 14.4

DSCHAN110OL DSCHAN200OL

------

Bordering Mirrors

9.6

DSCHAN210OL

------

Back Lighting Mirrors

4.8

DSCHAN110OL

------

IDEAL Lighting Solutions 2021

8.6

LEDCHAN110

12.4 17.1

LEDCHAN120 23

12 17.1

15.2

LEDCHAN130

12.2 17.1

LEDCHAN140

15.2

13.5

24.5

12.2 17.1

LEDCHAN200 10

10.5

19.2

LEDCHAN210

16.9 19.5

WWW.TASKLIGHTING.CO.NZ

IDEAL Lighting Solutions 2021

| 69

Raytec Intelligent Emergency Lighting RAYTEC ARE WORLD LEADERS IN LED LIGHTING FOR HAZARDOUS AREA ENVIRONMENTS. SPARTAN IS OUR RANGE OF GLOBALLY CERTIFIED EX LED LUMINAIRES, DELIVERING CLASS-LEADING PERFORMANCE AND RELIABILITY.

In this article, we look at Ex lighting requirements for ports and terminals and identify some of the key features to consider when specifying luminaires for these environments.

WHY EX LIGHTING IS NEEDED FOR PORTS The nature of port applications, and their coastal location, provides a challenging environment when specifying lighting. A luminaire capable of withstanding the elements is essential, given that it will commonly be exposed to marine conditions (often not too dissimilar to that of an offshore application). Furthermore, major ports that act as a hub for imports and exports will likely have a significant amount of hazardous substances (such as oil and gas products, but also bulk grains which carry an explosion risk) passing through on a daily basis, or being held in storage facilities on-site. Port owners must therefore ensure the site is compliant by having the necessary equipment on-site to safely handle and store these substances; this is where hazardous area lighting becomes so important.

Easy Maintenance The way an LED luminaire has been designed can also have a large impact on how easy maintenance is to carry out, and how long the port will be left without light should a problem arise. MAKING EASIER ACCESS • Choosing an LED luminaire with a removable PSU (Power Supply Unit) can help to make

RAYTECH INTELLIGENT EMERGENCY LIGHTING

• access for maintenance much easier. • Luminaire’s such as the SPARTAN High-Power Flood & High-Power Bay, allow the PSU to be • removed from the main body of the luminaire, so all wiring and serviceable parts can be positioned in an easy-toaccess locations.

Emergency Lighting Ports and terminals are high-risk environments and rely on the use of emergency lighting to ensure the safety of everybody on-site should a power failure occur. DURATION & OUTPUT • Fully Retrofitable • Self Tests Emergency Battery • UK Designed & Manufactured • 5yr Warranty • Tri-colour LED indicator • ATEX & IEC Ex Rated - Zone 1

• It’s important to check the emergency duration of a luminaire to ensure it provides back-up • illumination for a sufficient length of time, but you should also consider the percentage light output of the luminaire in emergency mode. It is common for output to drop significantly when switching to emergency mode. • Most SPARTAN emergency luminaires provide 25% light output for 3 hours as standard, but if required can run at up

L O N G L I F E – F U L LY R E T R O F I TA B L E

to 100% light output for shorter durations. This provides the ultimate performance and flexibility for emergency lighting in hazardous areas. • Prior to installation, it’s recommended to complete a lighting design scheme based on both normal and emergency conditions. This will ensure sufficient light levels are being achieved and the correct number of luminaire’s have been specified. AUTOMATED TESTING • Modern emergency luminaires, such as SPARTAN Intelligent Emergency, are helping to make emergency systems more reliable. Designed to ensure optimum battery performance, they provide a self-testing function which automatically cycles the battery to ensure its health and to measure its capacity.

Withstanding the Elements Ports and terminals often represent an unforgiving environment for the lighting installed on-site. The conditions in some areas of a port will be very similar to what would be expected in offshore applications, and lighting must be specified accordingly. There are three major environmental issues that companies face when installing hardware for a port application; Corrosion – exposure to sea spray and salty air means a greater risk of corrosion. The risk is greater in locations like docking areas, where exposure to sea spray is greater, but all areas around ports provide a higher risk of corrosion than inland applications. The hardware installed must therefore be specified to withstand these conditions. At Raytec, our SPARTAN range is designed for offshore use in-mind; made with marine grade aluminium, stainless steel fixings and ABS-approved to marine standards. Extreme weather – with high wind and rain levels, extreme weather conditions at ports is a regular occurrence. A luminaire with a high IP rating is essential to prevent water ingress which could damage internal components. While the majority of hazardous area fittings will be rated to at least IP65, we would recommend specifying to IP66 or IP67 for port applications. Sun – depending on where the port is located, prolonged exposure to ultraviolet rays (UV) can cause issues with

luminaires with a GRP housing (glass reinforced plastic). Over time the GRP can degrade and become brittle, which could invalidate the luminaires hazardous area certification, rendering it useless.

Other Considerations Dust-Only Certification Protecting against dust is a key factor for any area of a port where bulk grain is being handled or stored. If the only explosion risk in these areas comes from dust, i.e. grain, a smart specification can save costs by specifying an Ex luminaire certified for protection against dust only (unlike most luminaires which are certified for gas and dust). A number of SPARTAN Ex products are available as a dedicated Zone 21 variant for exactly these kinds of applications, providing a cost-effective solution in areas where there is no explosion risk from gas, only dust.

Features • Emergency function: Self testing intelligent emergency • Certification: ATEX and IEC Ex rated for Zone 1 and 2 Gas and Dust, and UL/CSA inc. C1D2 • Input: Mains Voltage 110-254V 50/60 Hz AC only • LED Type: PLATINUM SMT LEDs • IP Rating: IP66 and IP67 • Temperature Range: -20° to +50° • Battery: Ni/Cd 12V • Battery Duration: Up to 3hrs @25% power other options available • System health indicator: Tri- colour LED indicator

– HIGH PERFORMANCE IDEAL Lighting Solutions 2021

| 71

PROTECT YOUR BIGGEST PRIVILEGE - YOUR FAMILY KIDDE SMOKE V DETECTOR PHOTOELECTRIC 10YR LITHIUM BATTERY CHU10Y29

ASK FOR A DEAL INSTORE!

Tamper Proof: Yes Sensor Technology: Photoelectric Sensing Technology Temperature Range: 0˚C to 40˚C Humidity Range: Up to 93% relative humidity (RH) non-condensing Approvals: Certified by BSI to EN14604: 2005 / VDS Q Certification * / CE certified • Life of Alarm: 10-year alarm life • End of Life Notification: Yes – audible and visual signal after 10-years

DISPOSABLE SURGICAL FACE MASK BOX OF 50 CEZ25124246 • Box of 50 • 3 Layer Protection • PP, Non-woven Fabric + Meltblown Fabric • Elastic ear-loops with no pressure to ears

CHEMZ SURFACE & EQUIPMENT SANITISER 500ML

CHEMZ HAND SANITISER 150ML & 400ML

CMZ7185

CMZ9232 150ml, CMZ9234 400ml

• Chemz Surface & Equipment Sanitiser is a highly evaporative, no rinse ethanol-based sanitiser for use on soft and hard surfaces. Kills a range of bacteria, enveloped viruses, fungi and yeast. Kills 99.99% of germs. Effective against a wide range of pathogens. (Including COVID-19) • Rapidly evaporates without leaving an odour, QAC free • Suitable for Food Processing Areas, Equipment, Dairy, Bench and hands • Tops, Quality Control Equipment, Tools and other non-porous surfaces.

• Chemz Hand Sanitiser is a highly effective alcohol-based sanitiser which also contains Benzalkonium Chloride (BAC) disinfectant to give additional sanitising power • Quick acting and highly effective alcohol-based hand sanitiser • Kills a range of bacteria, enveloped viruses, fungi and yeast • Kills 99.99% of germs. Effective against a wide range of pathogens (Including COVID-19)

CMZ7185 500ml BUY 2+ FOR

$7.95 each

• • • • •

CMZ9232 150ml BUY 2+ FOR

$2.50 $3.25 each

each

Ideal Livewire 52: Sept - Oct 2021

Articles inside

MATCHMASTER - THE PREWIRE

HAMER - KPA VS PSI

MILWAUKEE LASERS

A WORD FROM IDEAL

SUBCIRCUIT PROTECTION