Residential Solutions

RESIDENTIAL

SOLUTIONS

YOUR GUIDE TO RESIDENTIAL SOLUTIONS & PRODUCTS

GIVING BACK TO NEW ZEALAND COMMUNITIES

2022 PRODUCTS SUPPORTING THE IDEAL FOUNDATION

SUPPLIER PRODUCT DESCRIPTION

BIZLINE ALL BIZLINE PRODUCTS.

PHILIPS KING DOWNLIGHT RANGE, OYSTER (TBC).

HAGER RCBO SINGLE MOD 16A & 20A TYPE A 1P 6KA 30MA C-CURVE.

MARLEY FLEXIBLE CONDUIT 20MM, 25MM. EASI, SUPA POLYPROPYLENE AND SOLA RANGE.

LEGRAND 630 SERIES RANGE. MOTION SENSORS RECESSED AND SURFACE RANGES, NETATMO SMART OUTDOOR CAMERA.

MILWAUKEE FISH STICKS, FISH TAPE, LARGE PACKOUT TOOLBOX, TAPE MEASURES, MULTI TOOL AND HYDRAULIC M12 DRIVER.

COMPUTER DYNAMICS

EZVIZ SECURITY KITS, HILOOK 5MP SURVEILLANCE SYSTEM.

SIMX

MANROSE QUIET 125MM & 150MM - WALL/CEILING BATHROOM FANS & KITCHEN FANS WITH TIMER & HUMIDITY SENSOR OPTIONS, SMARTVENT EVOLVE HOME VENTILATION.

THORN JEWEL 2 LED BULKHEAD, PANTHER 1500 LED

Iconic ® Outdoor

Range overview

PDL Sockets

Available in different options:

PDLO394-XW

Single switched socket horizontal 10A 250V

PDLO395-XW

Double switched socket horizontal 10A 250V

PDLO394-BK

different options:

PDLO394-XW

Single switched socket horizontal 10A 250V

Single switched socket horizontal 10A 250V

PDLO395-BK

PDLO395-XW

Double switched socket horizontal 10A 250V

Double switched socket horizontal 10A 250V

PDLO394-BK

PDL Switches

Single switched socket horizontal 10A 250V

PDLO381-XW

1 gang horizontal switch 20A/16AX 250V

PDLO395-BK

Double switched socket horizontal 10A 250V

PDLO381-BK

1 gang horizontal switch 20A/16AX 250V

PDL Switches

PDLO381-XW

1 gang horizontal switch 20A/16AX 250V

PDLO381-BK

1 gang horizontal switch 20A/16AX 250V

Hager e-cat app Information on the go!

Access all product information on Hager products: product catalogue, technical data and specifications, brochures, videos and more... at your fingertips.

Scan QR Code to find out more.

silhouette simple, elegant.

Hager’s silhouette range has a simple but elegant form based on the serene balance of proportions and the reduction to the object essentials, giving the product the right tone of voice in order to fit within its environment.

silhouette features:

UV Stabilised – Strong impact resistant polycarbonate material will not ‘yellow’ over time.

Roto-loc Mechanism – The patented Roto-loc system eliminates the possibility of the mechanism being pushed back into the cavity.

Child safety shutters – A spring loaded shutter protects little fingers from live parts inside sockets.

Multiple finishes – Available in Gloss White, Matt Black, Matt White, Stainless Steel and Aluminium.

Added value – A full range of accessories including new press switches, HDMI mechanisms and USB A+C chargers.

allure

honest, authentic

Continuing on with Hager’s design philosophy, the allure range is serenely balanced and can elevate any modern interior with its simplistic yet contemporary design. The translucent edge that surrounds allure, accentuates its elegant profile – creating a unique floating effect.

allure features:

UV Stabilised – Strong impact resistant polycarbonate material will not ‘yellow’ over time.

Roto-loc Mechanism – The patented Roto-loc system eliminates the possibility of the mechanism being pushed back into the cavity.

Child safety shutters – A spring loaded shutter protects little fingers from live parts inside sockets.

Multiple finishes – Available in Gloss White, Matt Black and Matt White.

Added value – A full range of accessories including new press switches, HDMI mechanisms and USB A+C chargers.

IP2X compliance – Provided with a retained hinged cap in allure.

finesse minimal, sleek.

Hager’s architecturally inspired finesse range is sure to impress audiences with its minimalistic and precise design, and is considered to be ingeniously simplistic. Its remarkable slim profile and refine translucent edge perfectly complements the sharp and clean lines of a surrounding modern interior.

finesse features:

UV Stabilised – Strong impact resistant polycarbonate material will not ‘yellow’ over time.

Roto-loc Mechanism – The patented Roto-loc system eliminates the possibility of the mechanism being pushed back into the cavity.

Child safety shutters – A spring loaded shutter protects little fingers from live parts inside sockets.

Multiple finishes – Available in Gloss White, Matt Black and Matt White.

Added value – A full range of accessories including new press switches, HDMI mechanisms and USB A+C chargers.

IP2X compliance – Deep screw receptor in finesse.

PDL Iconic® Collection

Future-proof ‘skinability’

Iconic is based around a unique, electrically safe grid plate, with a choice of three different skin designs that simply clip on top. Once the grids have been installed by an electrician, it’s safe for anyone to change the skins at any time. Simply clip off the standard skins and clip on the new design.

Iconic®. Irresistibly future-proof.

With four colours that complement any décor, Iconic’s translucent edges allow the cover plates to pick up background colours for a design that blends in with any wall colour.

Anthacite

Solid Black

Solid White

Cool Grey Vivid White

Iconic® Styl. Irresistibly modern.

Iconic Styl adds elegance, texture and modern simplicity with three metallic finishes to complement a broad range of décor styles.

These slim, stylish skins are designed to clip directly onto standard Iconic grids and are sure to make a statement in any home.

Iconic Styl is an irresistibly beautiful design made from durable aluminium material with a high quality anodised finish. The surface is sandblasted for a modern ‘satin’ appearance and the rounded edge plays with light creating beautiful reflections.

Crowne

Silver Shadow Silver

Iconic® Essence. Irresistibly elegant.

With smooth round wooden edges, Iconic Essence brings a hint of nature to the home. Inspired by classic comfort and elegance, the natural real timber craftsmanship utilises high quality, sustainable materials to complement the room.Iconic Essence has been designed and made using durable ABS colourfast and a UV stabilised plastic surface and birch real timber edge with matt lacquer for protection.Designed to clip on to the Iconic platform – upgrading has never been easier.

Ash Grey Arctic White

Compared with other wall switches on the market, the Saturn Collection is unique; providing silky-smooth operation and architecturally designed fascias that look great and are a breeze to clean.

4062PB-HS

Saturn Switch LED Options

Z4062PBL-ZW

Too often when we need to turn a light on in the middle of the night, we’re left scrambling in the dark trying to find the wall switch.

Whether you require an LED indicator light to find a wall switch in the dark or to know which switch is in operation – Saturn Switches have it covered. All Saturn ranges are available with or without LED options; the choice is yours.

Saturn Labelling

Saturn Switches are also available with the option of handy labelling, making it easy to know what each button does.*

Labelled Button Cap Pack Options

2

1

Saturn Horizon

4062PB-OM

8 PDL by Schneider Electric

Saturn Collection Wall Switches

Saturn Zen

Saturn Collection Switched Sockets

Twin Switched Sockets

The stunning Saturn Collection is the ideal addition to any kitchen, complementing and enhancing this busy social hub in the home.

Saturn Switched Sockets provide power for all 250V electrical appliances. Although they work the same as a standard power outlet, the eye-catching architectural design is far from standard.

Quad Switched Sockets

If you require multiple power outlets, Saturn Quad Switched Sockets are your perfect option, combining Saturn’s stylish look with the convenience of a quad power outlet.

Saturn Quad Switched Sockets are ideal for providing power to a home entertainment system, kitchen appliances, or anywhere you require multiple power outlets. The benefit of extra spacing between the centre outlets makes it perfect for large plug chargers.

Saturn Collection Cooker Switches

Increase your home safety in style with the Saturn Push-Button Cooker Switch. It’s the ideal option for isolating power to your electric bench-top cooker and is also a safety requirement throughout New Zealand.

Saturn Collection Fan Controllers

Saturn Fan Controllers give you complete airflow control without compromise, when combined with ceiling sweep fans.

Saturn Collection Dimmers

The living room is one part of the house that can create many moods. Whether you require soft light while relaxing and watching a movie, or full light while playing with the kids – Saturn Dimmers will set the right mood any time of the day or night.

Saturn Dimmers give you complete lighting control without compromising your home’s style. You’ll also benefit from using less energy, saving you money on power bills, while helping to save the planet.

Clever Dimmer Design

Designed to reduce visual clutter on the wall, the Saturn Push-Button Universal Dimmer incorporates on/off switching and dimming control into one mechanism.*

The dimming performance has been optimised to ensure smooth dimming control. They can be used to control loads such as incandescent lamps, 240V halogen lamps, dichroic lamps and low voltage lighting that uses iron-core or electronic transformers.

*Only available with standard Saturn and Saturn Horizon range.

Put your customers in control with a PDL Wiser smart home

From blinds that close to keep the warmth in, a heat pump that clicks on before it cools down, and lights that dim as you drift off, a Wiser Smart Home can be easily adjusted to fit your customer’s lifestyle.

After it is installed by an approved Wiser installer, PDL Wiser is a flexible, automated smart home solution that lets the homeowner control their home with the intuitive Wiser by SE app, setting up their own automations and moments as they decide to add them over time.

Wiser Smar t Home Hub

The Wiser systemcommunicationinterface The hub allowsyou to control the home from a remote location.

PDL501902

Wiser Table Stand forHub

Optional stand for placing the WiserHub on a table

PDL5019020 0 01

Wiser MicroModule Switch

Tr ansforms a conventional push-buttonswitch into a connected device you can control from the switch orthrough the Wiser byS E app.

PDL5011WSZ

Wiser Micro Module Dimmer

Tr ansforms a conventional push-buttonswitch into a connected device you can control and dim from the switch orthrough the WiserbyS E app.

PDL5010WDZ

Wiser Micro Module Blind Controller

Tr ansforms a conventionaldouble push-button switch into a connected device you can control blindsfromthe switch orthrough the Wiser bySE app.

PDL5015 WBZ

WiserWindow/Door Sensor

Detectsopened and closed windowsand doors, and reportsthe statusto the WiserHub It consists of two separ ate parts: a sensorand magnet.

PDL591011

WiserMotionSensor

Detectsmovement and measures luminance in a room and reports the statusto the WiserHub.

PDL595011

Wiser Temperature/HumiditySensor

Helps to maintain a comfortable environment in the home by detecting changesin temperature and humidity and reporting climate data to the WiserHub.

PDL593011

Wiser Water LeakageSensor

Detectsthe presence of waterand alertsvia an connected to the WiserHub and detectswateron event to the Wiser Hub

PDL592011

IndoorIP Camera

Provides day/night HD recording, with 340° panning, motion tracking/detection alerts, intercom and event or continuous recording. Simple control via the Wiser by SE App from anywhere. Use standalone or integrate into the Wiser smart home system and Automations.

PDL723419

WiserIR Converter

ControlsTVs, heat pumps and HiFisystems via the WiserbyS E app using infrared (IR) technology.

PDL501401

WiserIconicSwitch,2AX

Idealfor controlling LED lighting loadsand exhaust fans The smallhousing wit h integr ated terminals allows quickinstallation into 6-gang plates and standard wall- boxes.

PDL356PB2MBTZ-VW

WiserIconicDimmer

Suitable for controlling a wide varietyof loads. The housing wit h integr ated terminalsallows quick installation into 3-gang platesand deep wall-boxes.

PDL354PBDMBTZ-VW

WiserIconicSwitch,10AX

Suitable for controlling a wide varietyof loads. The housing wit h integr ated terminalsallows quick installation into 3-gang platesand deep wall-boxes.

PDL356PB10MBTZVW

Wiser Iconic TwinSocket Grid, 10A

The Iconic Connected Socket has two independent 10 A rated socket outlets The subtle Iconic status LED indicatorcan be customised using the Wiser by SE app Skin code isPDL395CSC.

PDL395CSGZ

WiserIconicSwitch,2AX

Idealfor controlling LED lighting loadsand exhaust fans The smallhousing wit h integr ated terminals allows quickinstallation into 6-gang plates and standard wall- boxes.

PDL356PB2MBTW-VW

WiserIconicDimmer

Suitable for controlling a wide varietyof loads. The housing wit h integr ated terminalsallows quick installation into 3-gang platesand deep wall-boxes.

PDL354PBDMBTW-VW

WiserIconicSwitch,10AX

Suitable for controlling a wide varietyof loads. The housing wit h integr ated terminalsallows quick installation into 3-gang platesand deep wall-boxes.

PDL356PB10MBTW-VW

Wiser Iconic TwinSocket Grid, 10A

The Iconic Connected Socket has two independent 10 A rated socket outlets The subtle Iconic status LED indicatorcan be customised using the Wiser by SE app Skin code isPDL395CSC.

PDL395CSG

OutdoorIP Camera

With allthe featuresof the Wiser Indoor IP Camera (excluding motion tracking and panning), the Outdoor camera position and IP56 protection, it can be

PDL724419

WHERE DESIGN MEETS STYLE

Performance and aesthetic combine to create the Excel Life Matt range of wiring devices. Featuring a luxurious matt texture, they not only look striking, but the matt finish makes them easier to clean and maintain.

Complement matt surfaces, tapware or appliances to create a designer finish, or be bold and add contrast.

Outshine with Matt!

DISCOVER THE EXCEL LIFE MATT COLLECTION

EM400A2PMW

EM883MB

ED770/6MB

ED770/3MW

ED787MW

ED777USB2IMB

LARGE SELECTION OF SWITCHES

ILLUMINATED LED

Illuminated LED rings add a contemporary tech feel. They can be wired so they are always illuminated, or only when the switch is either in the ON or OFF position

To create rockers with the illuminated LED rings, add the EM770LEDWE mechanism to any standard 16A or 20A EM770 rocker switch.

SUPER SMOOTH DIMMING

Enjoy the 2 & 3 wire, flicker-resistant all load dimmers. They’re LED friendly and feature overload protection. They work bril liantly with slave switches for multi-way dimming in large rooms, stairwells and hallways.

Use with HPM DLI or LDL Tri-colour series LED downlights for smooth dimming.

Program LEDs red or blue Easy programming to set minimum and maximum brightness levels

3 x EM770LEDWE

ED770/3WE + 3 x EM770LEDWE

ED770/3WE

ED770/4GPLWE + 4 x EM400A2PWE + ED770/4PLDI

ED770/3WE + 3 x EM770LEDWE

FASTEST USB POWERPOINTS

INNOVATIVE CHARGING SOLUTIONS

Charge without cords

Convenient charging without the hassle of cords. Simply place your device* on the cradle to charge the battery *Qi compatible devices only. For full list of compatible devices visit www.wirelesspowerconsortium.com

Moving toward USB-C

USB Type-C has been adopted by all the major tech companies. Boasting faster charging and ease of use, USB-C is compatible with all the latest devices including iPad Pro, iPad 8G, iPhone 12 and MacBook Pro.

In this modern world, speed counts. Our USB powerpoints super charge at 2 x 2.4A, the fastest on the market! They have been designed to charge devices at their maximum speed including the latest products.

Future-proof your charging

Our Hybrid Type A+C charger allows the use of Type-A USB charging which is currently the standard. It also includes a Type-C port for newer electronics such as Apple & Samsung devices

Make a mega usb charging station

Add to kitchen pantries, nooks and studies for a tidier charging solution

Easy retrofit

This double powerpoint with Integrated USB makes wall boxes and masonry applications a breeze.Available in dual Type A or Type A+C

EDWCWEMS

ED770/3GPLWE + 3 x EMUSB2PSAWE

ED777USB2ACWE ED777USB2IWE

SIMPLIFY DAILY LIFE MAKE IT SMART

Introducing Excel Life Smart - a collection of smart wiring devices second to none. Combining local design and engineering with world-class smart home technology by Netatmo, this collection of switches and powerpoints blends seamlessly with existing Excel Life installations with the added convenience of full home control using a wall switch, smart phone or voice via a digital assistant.

Enjoy convenience, security and greater energy efficiency without the need to replace existing lighting or appliances.

Smarter than your average switch!

EASY TO INSTALL

INTEGRATED SMART TECHNOLOGY

FUTURE - PROOF TECHNOLOGY

COMPATIBLE WITH ALL DIGITAL ASSISTANTS

DATA SAFETY

HIGH - LEVEL ENCRYPTION

“RELOCATE ME ANYWHERE”

LEGRAND OWNED CLOUD

EXCEL LIFE DESIGN BASED ON 240 V a.c. WIRING

SINGLE GPO EWN787MB

WIRELESS SWITCH EWNWSW1MW

2 GANG SWITCH EWN770/2WE

Connecting my home

Shutters/Blinds

Wellbeing

Outdoor elegance

Built to last

Hager‘s weatherproof switches and sockets are designed to withstand harsh environments that the Australian weather can demand. UV stabilised with an elegant and unintrusive aesthetic, they will never age.

hagerelectro.com.au

WBWS116

Switch IP66 1 gang 16A

WBWS216

Switch IP66 2 gang 16A

WBWP1S

Socket IP53 single horizontal 10A

WBWP115S

Socket IP53 single horizontal 15A

WBWP2S

Socket IP53 twin horizontal 10A

WBWP2SH

Socket IP53 Twin horizontal 10A Shallow mount

Range overview

PDL Sockets

Available in different options:

PDLO394-XW

Single switched socket horizontal 10A 250V

PDLO395-XW

Double switched socket horizontal 10A 250V

PDLO394CS-XW

Single switched socket with timer 10A 250V

PDLO394-BK

Single switched socket horizontal 10A 250V

PDLO395-BK

Double switched socket horizontal 10A 250V

PDLO394CS-BK

Single switched socket with timer 10A 250V

PDL Switches

PDLO381-XW

1 gang horizontal switch 20A/16AX 250V

PDLO381-BK

1 gang horizontal switch 20A/16AX 250V

THE GLOBAL SPECIALIST IN ELECTRICAL AND DIGITAL BUILDING INFRASTRUCTURES

SLEEK & ROBUST

WLC787CG

WL787USBLG

WL787LG

WL777/54CG

WL777LG

WL770/1LG

WL770/2CG

WLFAR920CG

Beautifully Simple Golf enclosures

Everything in the system

The golf enclosure is the perfect solution for all residential and multi-residential installations. The enclosure is swiftly and easily mounted and offers space for a large number of modular devices.

The advantages for you

• Flush or Surface mount, opaque or transparent door options available

• 1 to 4 rows from 4 to 72 modules

• Ample wiring space between the modular devices and terminals as well as behind the DIN rails

• Clean and convenient wiring thanks to patented integrated cable management system

Perfect compact solution

Hager’s single module onekombo RCBO’s are compact in size and fit perfectly into any installation. They feature a neutral-in one metre long fly lead, and two line side connection terminals (cage and busbar slot), creating the most versatile device on the market.

Wiring rules: RCD Selection What you need to know

Based on the voltage type, frequency and current.

eGeneral purpose use

Type AC

RCD can detect and respond to AC sinusoidal waves only.

Equipment with frequency inverters

Type F

RCD can detect and respond as for Type A, PLUS mixed frequency

zEquipment incorporating electronic components

Type A

RCD can detect and respond as for type AC, PLUS pulsating DC components.

Variable speed drives, induction motors

Type B

aRCD can detect and respond for Type F, PLUS smooth DC residual current.

Example of a Type A RCD: Our Reduced Height RCBO

RCD Examples of type of equipment / load

Leads with electronic components, typically:

Type A

- Class I appliances: IT and Multimedia equipment, washing machines

- Single phase Solar inverter where any smooth DC fault current is less than 6mA

- Electric vehicle (EV) charging where any smooth DC fault current is less than 6mA

Type I is a special Type A, 10mA, with a tripping time less than 40ms:

- Patient areas: medical equipment of Class I permanently wired or plugged in socket-outlets

Type A is also suitable for Type AC applications.

Hager offers a comprehensive range of Type A products which includes single module RCBO (ADC9...), 4P RCBO and RCCBs.

Frequency controlled equipment / appliances including Single phase inverters, typically:

Type F

Type B

- Some air conditioning systems featuring power inverter technology

- Some heat pump hot water systems where any smooth DC fault current is less than 10mA

- Some motor driven machinery

Type F is also suitable for Type AC and Type A applications. Hager offers 2P and 4P Type F RCCBs.

Electronic equipment including multi-phase inverters, typically:

- Variable speed drive

- UPS

- Electric Vehicle charging where any smooth DC fault current is greater than 6mA

- Solar inverter where any smooth DC fault current is greater than 6mA

- Industrial machines

- Cranes and lifts

Type B is also suitable for Type AC, Type A and Type F applications. Hager offers 2P and 4P Type B RCCBs.

Keeping people and property safe

Surge Protection Devices

Every electrical and electronic device has a specific dielectric strength against voltage fluctuations. If the voltage exceeds this strength, malfunctions and damage will occur.

Surge Protection Devices (SPDs) are designed to reduce the risk to people, property, electrical installations and connected devices from damage caused by surges, transients and lightning.

SPDs are inactive until a certain abnormal electrical energy threshold is crossed. Once the energy threshold is reached, SPDs temporarily divert damaging surge energy away from people and property.

one range, one busbar

one solution

Our onekonekt system offers one of the most versatile and flexible solutions to electricians on the market today. The use of busbar in our industry is not a new concept whereas providing a full range of residential protection devices for both single phase and three phase installations that connect to the same busbar, definitely is.

hager.com/nz

A SAFER HOME WITH AFDD

ARC FAULT DETECTION DEVICE

AFDD: THE ULTIMATE HOME ELECTRICAL PROTECTION

When Christchurch homeowner Paul Griggs decided to sell his family’s newly renovated home, he was dismayed to discover he might need to completely replace its assortment of wiring in order to assure buyers of its electrical safety. But a new solution for home electricity security from PDL by Schneider Electric solved the potentially costly problem quickly and easily.

The answer was Arc Fault Detection RCBO – all-in-one devices combining arc fault detection with overload short circuit breakers and residual current protection. Including these in a new switchboard at the property took care of electrical compliance, was less expensive than full rewiring, and provided the new homeowners with peace of mind, while keeping their insurance company happy too.

WIRING THROUGH THE YEARS

The Woolston house contains what Paul Griggs describes as a “mixed bag” of wiring. Built in 1920, it was extended in the 1960s to double its size. Griggs and his family have lived there since the 1990s, adding a garage and two sleepouts over that time, and then spending the last two years renovating the entire property for sale.

He says the home’s electrics are a mixture of newer, brand new and original wires, some encased in metal conduit. “It would be fair to say we were maximising the old wiring for the modern home’s necessities and the additional outbuilding.”

While the family hadn’t experienced any significant problems,

Griggs wanted to ensure the home’s electrical system couldn’t cause insurance issues for potential buyers and impact the sale price. But in order for an

Electrical Inspector to sign off on the property’s electrical compliance, he found that the age of the house meant he could be facing a bill for complete rewiring.

Not keen on paying thousands of dollars on top of the recent renovation costs, Griggs did some more research and discovered the newly launched Arc Fault Detection RCBOs from PDL by Schneider Electric.

ULTIMATE HOME ELECTRICAL PROTECTION

AFDD-RCBOs are the ultimate solution for electricity malfunction detection and are an investment in protecting a home and its occupants from the risk of electrical fire. They are combination devices that detect arc faults (one of the most common causes of electrical fires) and also feature miniature circuit breakers (MCBs) and residual current devices (RCDs) to protect against short circuits, overloads and fatal electric shocks.

While RCDs and circuit breakers are standard additions to switchboards in New Zealand, arc fault detection devices (AFDDs) are still a relatively new concept here, despite having been mandatory in Canada and the USA for several years.

Arc faults can occur when cables become damaged, often when squashed underneath or behind furniture, or simply through poor connections or old wiring. The insulation inside the damaged cable lets current leak out, generating heat and carbonising the material around it, which then becomes more conductive and generates a bigger arc that is invisible to those in the home until the cable or socket catch fire.

An AFDD installed in a switchboard monitors the electrical arcs that occur as part of daily electricity usage on the circuits throughout a home. If it finds any abnormal or dangerous arcs it will trip to isolate and disconnect the faulty circuit before it can ignite and cause a fire.

AFDDs’ ability to detect these arcs before a fire starts means they have been approved by many insurance companies as a way of mitigating risk. They’re particularly useful for older or wooden homes, properties where the occupants have limited mobility, or in rentals where landlords have no control over how many appliances or devices tenants are plugging in.

The new AFDD-RCBO from PDL by Schneider Electric updates its original AFDD that launched in New Zealand in 2016, now combining the circuit breaker and RCD elements with the early warning system of arc fault detection.

COST-EFFECTIVE ALTERNATIVE TO REWIRING

After discussions with his electrician and insurance company, Griggs was assured that his compliance would be signed off if he installed a new mains board with the AFDD-RCBOs as part of it – a very welcome alternative to full rewiring.

“This installation was what we decided to go for, as the AFDD system would identify any issues in any one electrical line, meaning rewiring was always then limited to only problem areas,” he says.

“Further to this, we had the peace of mind that with installing the AFDDs we would have full insurance on the building and that any issues within the electrics would be immediately isolated by the AFDD closing off that individual line.”

Peter Matthews of PPM Electrical Services in Christchurch (an electrician and Electrical Inspector) carried out the installation and says the combination device is a useful tool for homes.

“Arc fault detection is still a relatively new concept for New Zealanders and it’s a good one. They [arc faults]

can happen in a newer site too, so it’s a very good idea.”

Peter Matthews was also impressed by how easy the AFDDRCBOs were to install and the fact they detected an issue straight away. “It ‘red flagged’ it, so as soon as I turned it on it wouldn’t set,” he explains. “Through more investigation I found that particular circuit hadn’t been rewired as I’d been led to believe, and it was tripping on the residual function of the AFDD.”

SIMPLE SOLUTION FOR A SUCCESSFUL SALE

Paul Griggs says he was delighted with the result the AFDDRCBO installation provided. “Once this work was completed we had a robust and sound electrical system. If any issues arise in future they’ll be immediately identifiable and repairable.”

The property sold for its asking price and Griggs says the installation of the AFDD-RCBOs gave everyone involved peace of mind and saved his family the significant expense of a full rewire.

“We had a better deal from the electrician due to ease of install, easy compliance sign off and easier dealings with our insurance plus the new owners’ insurance,” he says. “We can all sleep a lot better at night too, knowing this house should never burn down due to old or faulty wiring.”

PDL Switchboards

DBF & DBS series

Distribution Board

100A Flush Mount, Plastic

Distribution Board

100A Surface Mount, Plastic

DISTRIBUTION BOARDS

METAL DISTRIBUTION BOARD, FLUSH MOUNTED, PLAIN FRONT

PLASTIC DISTRIBUTION BOARD, FLUSH MOUNTED

Solar for summer!

The perfect summer project!

ASK ABOUT OUR SOLAR SOLUTIONS TODAY!

*For homes up to 350m2

*For homes up to 350m2

SmartVent Tempra is a single room heat recovery unit suitable for residential retrofi t and new builds, elderly care facilities, student accommodation, military barracks and apartments.

SmartVent Tempra meets the performance requirements for continuous ventilation under the NZ Building Regulations. With a 100mm diameter heat recovery outlet, these units have low energy consumption and low noise levels. Based on a 2.4m stud and 0.35 ACH (as per NZS4303.1990), SmartVent Tempra can be set to run continuously at 6 l/s (for rooms up to 25m2) or 9 l/s (for rooms up to 37m2), boosting up to 13 l/s, recovering energy from the extracted air and returning it to the dwelling.

*For houses bigger than 350m2 contact Smartvent’s support team for assistance

HEALTHY HOMES STANDARDS

WHAT ARE THE HEALTHY HOMES STANDARDS?

The Healthy Homes Standards became law on 1 July, 2019.

The Healthy Homes Standards introduce specific and minimum standards for heating, ventilation, moisture ingress and drainage, and draught-stopping in rental properties.

• All private rentals must comply within 90 days of any new or renewed tenancy after 1 July, 2021, with all private rentals complying by 1 July, 2024.

• All boarding houses must comply by 1 July, 2021.

• All houses rented by Kainga Ora (formerly Housing New Zealand) and registered Community Housing Providers must comply by 1 July, 2023

Landlords are responsible for maintaining and improving the quality of their rental properties. These standards will help ensure landlords have healthier, safer properties and lower maintenance costs for their investments.

The standards will also make it easier for tenants to keep their homes warm and dry.

MECHANICAL VENTILATION REQUIREMENTS TO MEET THE HEALTHY HOMES STANDARD

All kitchens and bathrooms must have an extractor fan vented to the outside. It is important that these fans work and there are some minimum performance standards:

KITCHENS

• In any room with a cook top, new fans or rangehoods installed after 1 July, 2019 must have a minimum diameter (including ducting) of 150mm or an exhaust capacity of at least 50 litres per second.

BATHROOMS

• In any room with a shower or bath, new fans installed after 1 July, 2019 must have a minimum diameter (including ducting) of 120mm or an exhaust capacity of at least 25 litres per second.

Landlords should ask installers for the details of the fan diameters, ducting and flowrate in writing, so they can show they are compliant with the Healthy Homes ventilation standard.

IF YOU HAVE AN EXISTING FAN

If you have an existing fan fitted before 1 July, 2019, it does not need to meet these standards and can be left in place. However, if it breaks and needs replacing, it will need to be upgraded to meet the new standards.

Many fans in New Zealand have historically been 100mm in diameter. These do not meet the standard and so do not meet the new standard. Simx would recommend that these fans are replaced with a fan that meets the new standard.

HOW DO I SELECT A FAN?

The first consideration is where you want the fan to go. The best option is using ceiling mounted centrifugal fan systems that are mounted in the roof cavity. Other options available include inline fans, ceiling fans, through the wall fans or window fans. If a fan is near the bath or shower, Simx would also recommend that consideration is given to a safety extra low voltage fan which is only 12 volts. Details of compliant fans based on the different mounting options are detailed below.

HEATING & VENTILATION

MILAN HEAT-FAN-LIGHT SYSTEM

• Ultra modern, high performance bathroom unit with integrated fan heat, LED light and exhaust function

• Energy efficient self-regulating heater

• Dedicated high performance air extraction ideal for control of steam and moisture

• Premium LED light panel with high lumen output

HEAT-LIGHT SYSTEM WHITE

• 100mm Heat-Light System - White Fascia Standard Profile, 2-Way Wall Switch (supplied)

• Heat Lamps: 2 x 275W

• Total Watts: 650W

• Cut-out Size: 390mm x 220mm

• Fascia Size: 450 x 250mm

• Ceiling Depth: 195mm

SATIN LED HEAT-FAN-LIGHT SYSTEM

• 125mm Satin Heat-Fan-Light System - White Fascia

• Low Profile, 3-Way Wall Switch (supplied)

• Centrifugal Fan: 588W, 75 l/s

• 270 m3/hr

• Heat Lamps: 2 x 275W

• LED Light: 10W 4000K

• Cut-out Size: 375 x 202mm, Fascia Size: 419 x 244mm

• Ceiling Depth: 198mm

• 125mm Satin Heat-Fan-Light System - White Fascia

• Low Profile, 4-Way Wall Switch (supplied)

• Centrifugal Fan: 1138W, 84 l/s

• 303 m3/hr

• Heat Lamps: 4 x 275W

• LED Light: 10W 4000K

• Cut-out Size: 320 x 320mm, Fascia Size: 370 x 370mm

• Ceiling Depth: 210mm

Continuous Ventilation with Genius Compliant to New Healthy Homes Regulations

The new provision to the Healthy Homes Standards allowing for continuous ventilation in bathroom and kitchen installations in modern consented rental properties comes into effect on the 12th of May 2022.

The Manrose Genius (MANFAN6844) is not only designed with multi-sensor automation, ultra-quiet and energy-efficient operation but also complies with the new Healthy Homes regulations. The award winning fan exceeds the minimum airflow requirements of 10 l/s for bathrooms and 12 l/s for kitchens when set to high continuous mode.

Genius features intelligent programming options to meet the demands of a wide range of domestic installations. The intuitive app provides the homeowner fully flexible ventilation control allowing the option to easily customise any settings to best suit their desired indoor air control requirements at any time.

HEALTHY HOMES SOLUTIONS

Serene Living is proud to be a partner to rental property owners and provide them with solutions to ensure compliance with the Healthy Homes legislation heating requirements.

We offer a wide range of effective and reliable solutions to meet the heating standards outlined in the new legislation.

The new Serenity line of panel heaters have been specifically engineered to provide property owners with straight-forward and easy compliance.

If you’re renting out your property, Serene has you covered. Don’t hesitate to ask an Ideal Electrical wholesaler about a Serenity panel or an Optima heater. For more information on Serene panels, visit www.serene-ind.com

HEALTHY HOMES HEATING STANDARD - INFORMATION S HEET

The New Zealand Healthy Homes Guarantees Act 2017 mandates for increased standards of heating and dryness in residential tenancies. The new standard mandates that living rooms in rental properties must have fixed heating devices capable of achieving a minimum of 18 degrees Celsius.

To calculate the required heating output for your property, use the heating requirement calculator on the Tenancy Services website.

COMPLIANCE TIME FRAMES

• 1 July 2021 – Private landlords must ensure that their rental properties are compliant with healthy homes standards within 90 days of any new tenancy.

• 1 July 2021 – All boarding houses must be compliant with healthy home standards

• 1 July 2024 – All rental properties must be compliant with healthy homes standards

TOP UP EXISTING HEATING

If you are adding additional heating to a room, each individual heating device must meet the standards outlined in the act unless you meet all of the following conditions for additional ‘top-up’ heating.

• The existing heating was installed prior to 1 July 2019 and

• The total required heating capacity for the room exceeds 2.4kW and

• The ‘top up’ you need for the room to meet the standard is 1.5kW or less

In some cases, there may be exemptions to meeting the standard, please view the Tenancy Services website for more information www.tenancy.govt.nz

HEATING & VENTILATION

CONTOUR FAN SYSTEMS - KITCHEN LAUNDRY

• Meets Healthy Homes Standards and complies with G4 Building Code

• Free Air Performance: 49 l/s, 175 m3/hr Sound: 38 dB(A)

• Selection of ready-to-fit fascia options available

IDEAL CODE

DESCRIPTION

MANFAN7032 CONTOUR 150MM NO FASCIA

MANDCT4510 ROUND FASCIA WHITE

MANDCT4511 ROUND FASCIA BLACK

MANDCT4512 SQUARE FASCIA WHITE

MANDCT4513 SQUARE FASCIA BLACK

HYPER150 EC INLINE FANS

• Metric Size: 150mm

• Watts: 18W

• Fan Performance: 105 l/s

• 380m3/hr

• Specific Fan Power: 0.17 W/l/s

• IP Rating: IP44

• Specific Fan Power: 0.82 W/l/s

• Sound: 52 dB(A)

IDEAL CODE DESCRIPTION

MANDCT4514 ROUND FASCIA WITH LED WHITE

MANDCT4515 ROUND FASCIA WITH LED BLACK

MANDCT4516 SQUARE FASCIA WITH LED WHITE

MANDCT4517 SQUARE FASCIA WITH LED BLACK

IDEAL CODE

MANFAN0085

125MM QUIET WALL/CEILING BATHROOM FAN

• Humidity control operation

• Setting the new standard in high performance bathroom air extraction

• Meets Healthy Homes Standards and complies with G4 Building Code

• Free Air Performance: 54 l/s, 194 m3/hr

• Sound: 38 dB(A)

MANFAN7182

HEATING & VENTILATION

SERENITY CONVECTION PANELS

TECHNICAL DETAILS:

• IP24 Splash-Proof

• All-Metal Body

• Simple Top-Mounted Manual Controls

• Adjustable Thermostat

• Hi - Low Heat Controls

• French White Finish

• 2 Year Full Replacement Warranty

IDEAL CODE

SRLS2020 (1 KW)

SRLS2210 (1.5 KW)

SRLS2021 (2 KW)

SRLS2220 (2.4 KW)

OPTIMA WALL FAN HEATER

TECHNICAL DETAILS:

• 2.4 kW

• Electronic Touch Controls

• Quiet Tangential Fan

• 3000 Rpm Brushless Motor

• Can Heat Large Spaces

• Easy Wall Mount

• 10 Year Full Replacement Warranty

IDEAL CODE

SRLS2055

SRLS2020

SRLS2210, SRLS2021, SRLS2220

OPTIMA SPACE HEATER

FEATURES:

• 10 speeds & heats

• Touch Electronic controls

• Quiet tangential fan Brushless 3000 rpm Motor

• Can heat large spaces

• Easy wall mount

SERENITY CONVECTION PANEL

FEATURES:

• IP24 Splash-proof

• All metal body

• Simple top mounted manual controls

• Adjustable thermostat

• Hi - low heat control

• French White

DIGITAL CONVECTION HEATER

FEATURES:

• Digital Electronic thermostat

• Intelligent heat management programs

• Blue back-lit LCD screen

• Splashproof IP24

SCIOLTO RECESSED WALL MOUNTED HEATER

FEATURES:

• All metal

• Adjustable Thermostat

• Quiet Tangential Fan

• Splash-proof IP24

• White

• Fits most Skope space heater cavities

LE MINUTEUR POWER SAVING BATHROOM HEATER

Le Minuteur S207T will heat efficiently even the largest bathrooms. This classic has been updated and refined to feature a new low noise fan, optional 30 minute runback timer and efficient 2kw heating element.

Le Minuteur S207T is available in 304-polished Stainless steel or French White and features two safety cut-outs.

FEATURES

• 2.0 kW

• New low noise fan

• Two safety cut outs

• EU ErP directive compliant

• 30 minute countback timer option

• 5 year full replacement warranty

SPECIFICATIONS

• W: 375mm H: 220mm x D: 140mm

• Wattage: 2.0kW

• IP Rating: 20

• Installation: Wall mount – High

• Construction: All-metal body and fan

IDEAL CODE COLOUR

SRLS207TSS Polished Stainless Steel

SRLS207TW French White

SRLS207TW

SRLS207TSS

HEATING & VENTILATION

PROFESSIONAL S2088 BATHROOM HEATER

Stainless steel fan heater with step-down thermostat

FEATURES

• Powerful 2.4kW fan heater

• Fully adjustable thermostat

• Quickly heats even the largest bathrooms

• Elegant and modern design

• Airslip technology minimises dust build-up

• Die-cast metal grill

• 10 year full replacement warranty

SPECIFICATIONS

• Sizes: W: 350mm | H: 214mm | D: 108mm

• Wattage: 2400w

• IP Rating: 20 wet areas

• Installation: Wall mount – High

• Construction: All-metal body, fan, wall mount and grill

PROFESSIONAL S2088 BATHROOM HEATER COVER OPTIONS

SRLS2088SS

SRLS2088W

SRLS2088SS

SRLS2088A

Heated Towel Rails

EVOKE SL125 HEATED TOWEL RAIL

• 70W, IP45, 230-240V

• 201 Grade Stainless Steel

• Polished Stainless Steel

• Multi-connect Wiring Options

• Wiring kits included

• Dimensions: 530mm H x 800mm W x 122mm D

QUADRO ST75 HEATED TOWEL RAIL

• 82W, IP45, 230-240V

• 201 Grade Stainless Steel (Chrome & Matte Black), 304 Grade Stainless Steel (Brushed Nickel)

• Colour Finishes: Chrome, Matte Black, Brushed Nickel and Gunmetal finishes

• Multi-connect Wiring Options

• Wiring kits included

• Dimensions: 800mm H x 600mm W x 120mm D

QUADRO ST65 HEATED TOWEL RAIL

• IP45, 230-240V

• 201 Grade Stainless Steel (Chrome & Matte Black), 304 Grade Stainless Steel (Brushed Nickel)

• Colour Finishes: Chrome (58W), Matte Black (68W), Brushed Nickel (58W), Gunmetal (58W), Brushed Brass (58W), Brushed Copper (58W) and Matte White (68W)

• Multi-connect Wiring Options

• Wiring kits included

• Dimensions: 530mm H x 600mm W x 120mm D

EVOKE SL115 HEATED TOWEL RAIL

• IP45, 230-240V

• 201 Grade Stainless Steel (Chrome & Matte Black), 304 Grade Stainless Steel (Brushed Nickel)

• Colour Finishes: Chrome (55W), Matte Black (66W), Brushed Nickel (55W), Gunmetal (55W), Brushed Brass (55W), Brushed Copper (55W) and Matte White (66W)

• Multi-connect Wiring Options

• Wiring kits included

• Dimensions: 530mm H x 600mm W x 120mm D

EVOKE SL130 HEATED TOWEL RAIL

• IP45, 230-240V

• 201 Grade Stainless Steel (Chrome & Matte Black), 304 Grade Stainless Steel (Brushed Nickel)

• Colour Finishes: Chrome (60W), Matte Black (73W), Brushed Nickel (60W), Gunmetal (60W), Brushed Brass (60W), Brushed Copper (60W) and Matte White (73W)

• Multi-connect Wiring Options

• Wiring kits included

• Dimensions: 800mm H x 450mm W x 122mm D

EVOKE CL100 HEATED TOWEL RAIL

• IP45, 230-240V

• 201 Grade Stainless Steel (Chrome & Matte Black) 304 Grade Stainless Steel (Brushed Nickel)

• Colour Finishes: Chrome (77W), Matte Black (93W), Brushed Nickel (77W), Gunmetal (77W), Brushed Brass (77W), Brushed Copper (77W) and Matte White (93W)

• Wiring kits included

• Dimensions: 800mm H x 600mm W x 122mm D

Matt White

True Spin Technology™ is a unique motor housing design that helps minimise vibration and reduce the need for balancing upon install.

True Spin Technology™ is a unique motor housing design that helps minimise vibration and reduce the need for balancing upon install.

New Glass fibre Composite Blades for increased strength and durability

Durable corrosion proof components and UV protection allows the Spinika to be safely used for both indoor/covered outdoor and commercial applications

Low noise output makes the Spinika an ideal fan for bedrooms

Highest Quality Japanese bearings create a smooth running long life fan that is guaranteed to give years of trouble free operation

Fully integrated 20 watt LED Light with high lumen output

New aerodynamic blade design for highest levels of air movement

ECO Switch Setting. A pre selected speed setting allows the fan to run at a reduced running cost whilst maintaining adequate air circulation

Reversible airflow option for summer or winter

Installation friendly quick connect wiring and quick fix assembly

Three light colour options: cool, natural or warm white to suit your preference

Unique dimming function allows 25%, 50%, 75% or 100% light output

Hi-Tec UV coating for exceptional durability and protection against harsh Australian conditions

TWO SIZES:

ENERGY SAVING DC Skyfan

The Future in fans has arrived

A Beautifully crafted range of fans uses ultra-silent DC motor technology and aerodynamic blade design to create exceptional levels of both energy efficiency, and performance.

Intelligent energy saving DC technology

Up to 75% less power consumption

High airflow capacity

Extremely quiet - ideal for bedrooms

In-built anti-vibration system

Glass fibre composite blades for added strength and durability

WITH LIGHT MODELS

Slimline 5-Step dimmable 20W LED (1800 lumen)

Quick click blade assembly

Indoor and covered outdoor

6 speed LCD multifunction remote

Eco, Sleep and Timer functions

Summer / winter reversible

Android and IOS app control option (sold separately) Compatible with Google Home and Alexa.

Tri colour changeable (warm, natural and cool light)

GREEN FACTS

•Amazing running costs of approximately 1 cent per fan per night*

•Reduce your carbon footprint, and save hundreds by reducing air conditioning usage

*Based on 8 hours usage, ECO speed (5.4w) and electricity cost of $0.30 per kWh.

LCD Remote Control Included:

•6 speed reversible

• Eco mode - the most energy efficient setting.

•Sleep mode - reduces 1 speed every 30 mins until speed 1

•1 - 12 hour run-on timer

ZEPHYR II WITH REMOTE WALL MOUNT FAN

40cm White Three Speed Oscillating Wall Mounted Fan with remote control included

• Wall mounted

• Three speed function

• Oscillating and tilt adjustable head helps cool the whole room

• AC plug and lead makes installing easy

• 1hr-12hr Timer

• Wind/Breeze/Sleep Mode

• Remote control included

• Black or White

1300mm

1500mm

Product appearance may slightly vary.

Product appearance may slightly vary.

DOWNLIGHTS

DOWNLIGHTS

• 8W 740-840lm

• Colour Selectable - 3000k/4000k/5700k

• IC-F Rated

• Lifetime L70 50,000 hrs

• 90mm cutout

• Recessed or flush lens option

RX DOWNLIGHT

• 7W, 10W, 13W & 15W versions available

• 527-1480lm

• Colour Selectable - 3000k/4000k/5700k

• IC-F Rated

• Lifetime L70 40,000 hrs

• 72mm/90mm/100mm/120mm cutout options

• Recessed or flush lens option

• For low glare and accurate beam control

• Recessed for low glare

• Suitable for indoor and exterior (soffits)

• Excellent beam designs

• IP65 front

• Insulation coverable (ic-f / ic-4) <220ma driver

• Fully adjustable 360° gimbal

• Suitable for indoor and exterior (soffits)

• Recessed for low glare

• Excellent beam designs

• IP65 front

THE KING DOWNLIGHT

• 7.5W & 10.5W versions available

• 750-1000lm

• Colour Selectable - 3000k/4000k/6500k

• IC-F Rated

• Lifetime 30,000 hrs

• 90mm/120mm cutout options

• Dimmable

• IP44

INTERIOR LIGHTING

RX MIRROR LIGHT

• The RX Mirror light elegant design is perfect to add a touch of style.

• With a high lumen output as well as interchangable CCT by slide switch.

• Available in brushed nickel, chrome plated & matt black on an indent basis.

RX LILLY UP-DOWN WALL LIGHT

• RX Lilly Wall Light is designed as an architectural up down wall light that being made of gypsum can be painted.

• It comes in two models - one with a rounded edge and one with a square edge

BLADE/SLIM BATHROOM LIGHT

• 50,000 hour lifespan

• 180° beam angle

• S501, S502, S503 tilt angle 350°

vertical and horizontal orientations

INTERIOR LIGHTING

• IP54 Suitable for use in Bathrooms. For indoor use only

• Colour correctable changeable (3000K, 4000K, 6000K)

• Lumen Output: 1,620lm - 2,900lm

RX SELENE OYSTER RX

• The RX Lighting Luna is a new family of surface mounted or cable drop suspended downlights.

3W SQUARE AMBIENT EFFECT WALL/STAIR

• Classification: IC

• CRI: 90

• Material: Aluminium

• 50,000 hour lifespan

• Dimmable

• Driver sold separately, 700mA

BRICK LIGHT UP/DOWN

• CRI 80

• Lifespan 36,000 hours

• Beam angle 110°

• Driver incorporated in base, dimmable

• L250 x D100 x H80mm

INTERIOR LIGHTING

STAIR TREAD RECTANGLE

• IC rated, Dimmable

• Driver sold separately, 350mA

• 50,000 hour lifespan

• CRI: 90

• Material: Die Cast Aluminium

ROUND EYELID WALL / STAIR LIGHT

• 1.2W. 90 lumens.

• Driver sold separately, 350mA

• 50000hr lifespan.

• IC Rated, Dimmable

• D80 x H35mm

IDEAL CODE COLOUR CUTOUT

HALR914BAL Brushed Aluminium 60mm

HALR914BL Black 60mm

SQUARE EYELID WALL/STAIR LIGHT

• 1.2W. 90 lumens.

• Driver sold separately, 350mA

• L80 x W80 x D35mm.

• 50000hr lifespan.

IDEAL CODE COLOUR CUTOUT

HALR915BAL Brushed Aluminium 60mm

HALR915BL Black 60mm

DIMMABLE SINGLE SPOT TUBULAR

• 8W.

• 570 lumens

• 50° beam angle. CRI97.

• 90° tilt. 350° rotate.

• 50,000 hour lifespan

IDEAL CODE WATTAGE COLOUR

HALS381B3 8W Black

HALS381W3 8W White

IDEAL CODE COLOUR CUTOUT

HALR914SL Silver 60mm

HALR914WL White 60mm

IDEAL CODE COLOUR CUTOUT

HALR915SL Silver 60mm

HALR915WL White 60mm

LED STRIP LIGHTING

LED STRIP OR LED RIBBON HAS BECOME A MAINSTREAM LINEAR LIGHTING OPTION IN MOST NEW BUILDS AND RENOVATIONS. TO MEET THIS DEMAND TASK LIGHTING OFFERS A WIDE RANGE LED STRIPS, PROFILES AND DRIVERS CARRIED AS STOCK IN MOST IDEAL ELECTRICAL STORES THROUGHOUT NEW ZEALAND.

WHERE TO USE PROFILES & LED STRIPS

• Kitchens, laundries, bathrooms, bedrooms, lounges, etc.

• Under toe kicks… use surface mount profile DSCHAN100OL with a 4.8W/m LED strip which is usually warm white (3000K) in residential projects

• Under cabinets /over benches… use recessed profiles DSCHAN120OL or DSCHAN140OL

• If recessing isn’t possible then surface mount profiles DSCHAN110OL or DSCHAN130OL

• Usually under cabinets 9.6W/m or 15W/m would be used to light up the working surface underneath.

• In bathrooms… Task Lighting Vanity packs can be used under wall hung vanity’s or vanity toe kicks in DSCHAN110OL profile as a night light. The Vanity packs come in 3 sizes, 500mm, 800mm & 1100mm in IP66 with pre-wired clear tails to suit most vanities.

• All strip packs, profiles, profile endcaps & drivers are all labelled on the TASK product stand. Strips are labelled by colour, W/m and length making selection easy.

CHOOSING DRIVERS & CONTROLLERS

Once a strip is chosen TASK’s free strip load calculator can be used to determine the load and current. Follow the link below which can be setup on phones and tablets or work directly on a desk top PC. Http://apps.tasklighting.co.nz/

Once the load is calculated add 10% and then choose the next largest driver. Drivers options include mains dimmable. Drivers need ventilation and should not be covered with insulation or located in wall cavities etc. The strip load calculator also determines the current for choosing control items such as low voltage dimmers & colour changing controllers which have a max current rating.

CUSTOMISED SOLUTIONS

Where longer, continuous profile lengths are required 4m lengths are available and can be cut to size. Larger profiles and high power strips are also available for general lighting projects. Talk to the Ideal team for advice on how Task Lighting can support you with all your LED strip lighting projects both large and small.

EXTERIOR & LANDSCAPE LIGHTING

RX BASIC BULKHEAD OVAL & ROUND

• 3000K/4000K/5000K

• Non dimmable

• Black or White

TYPHOON BULKHEAD ROUND FLUSH

• Lifetime: 25,000hrs

• Colour temperature: 4000K

• Microwave Sensor (REXBHR19W4KMG model only)

• 350mm diameter

• Wall & ceiling mount

• 50,000 hour lifespan

• 50° beam angle

• 90° tilt angle, 350° rotate

• Thermal and Daylight sensor incorporated

EXTERIOR & LANDSCAPE LIGHTING

CONO

• Up & down wall pillar light

• Aluminium poly powder coated black

• Tempered glass

• IP rating: IP54

• Input voltage: 240v AC

• TRI Colour

• 2 x 3w Built-in LED

• 2 years replacement warranty

PURHV3651TBLK 3000k 4000k 5500k

SELECT LOW GLARE WALL ROUND & SQUARE EYELID

• Driver incorporated, 500mA (240V) (Excluding EX912 B34DC)

• Select 3000K/4000K

• Exterior surface mount

• 50,000hr lifespan

• 90° beam angle

• D270mm x H75mm

• Exterior surface mount

• 50,000hr lifespan

• 120° beam angle

• IK10

• Salt spray tested 500 hours

A.

EXTERIOR & LANDSCAPE LIGHTING

ROUND & SQUARE DARKLIGHT / RECESSED WALL/CONCRETE

• 3W. 160 lumens.

• 24V Constant Voltage.

• 2700K Ultra Warm White. 40000hr lifespan.

• 120° beam angle. IP65. IC Rated.

• Driver not included, Current draw 0.13A per fitting.

• Interior / Exterior recessed wall, comes complete with plastic housing accessory for concrete installation.

ROUND & SQUARE LOW GLARE DARKLIGHT WALL / STAIR TREAD

• 3W. 95 lumens.

• 700mA Constant Current.

• Ø65mm cut out.

• 3000K Warm White. 30000hr lifespan

• Interior / Exterior recessed wall/stair lighting

SUNSYNK ECLIPSE ALL-IN-ONE SOLAR LED LIGHTS

• Battery Management System to deliver efficient operation

• Courtesy light activated all night

• Full output PIR movement activated

• Secondary (remote) solar panel included if aiming of the light restricts optimum charging

EXTERIOR & LANDSCAPE LIGHTING

CONNECT OPTIONS

• Beam Angle: 18°

• Lifespan: 35,000hrs

• Dimensions: 60mmØ x 84.5mm high, Ø50mm cut out

• IC rated

• Driver sold separately (Constant Voltage 24V)

IDEAL

• Lifespan: 35,000hrs

• Dimensions: 60mm Ø x 97mm high, Cut out: 50mm

• IC rated

• Driver sold separately (Constant Voltage 24V)

• Wiring accessories available

• Copper / 316 STS

IDEAL CODE

EXTERIOR & LANDSCAPE LIGHTING

24V DRIVERS

• Universal AC Input / Full range

• Constant Voltage [Parallel Circuit]

• Operating temp range -20 +50°C

BLOKK

• Aluminium poly powder coated black

• Input voltage: 240v AC

• TRI Colour

• 2 x 4.5w Built-in LED

DECK LIGHT 8 PACK

• Dimensions: 35mmØ x 29mm high

• Cut out: 30mm

• Beam Angle: 120°

• IC rated

• Colour Temp: 3000k Warm White

• Lumen: 2x 985lm

• CRI: 90

• IK06

• Lifespan: >90,000hrs (L80)

EXTERIOR & LANDSCAPE LIGHTING

MARINER II COLUMN SPOT DOUBLE

• Colour Temp: 2700k Super Warm White

• Lumen: 840lm

• CRI: 80

• IP65

• Lifespan: 50,000hrs (L70)

ECOSPOT SELECT PIR 2X10W 3CCT

• 150° detection, 10m diagonal range, 4m head on range

• 2x10W Selectable LED colours: 3000K/4000K/5000K - 2000 lm

• Wall or ceiling mount, Pan/tilt, Class II, IP54

BOLLARD LIGHTS

• garden / path / driveway lighting

• solid untreated hardwood

• easy installation

• low maintenance

• FSC Certified

• IP67

SLBL100F Copper

ELITA - LED BOLLARD

• The Elita bollard range has been developed for residential or commercial environments.

• Designed to be able to run on either a 12V system or 230V system.

• The IP65 weather protection rating and marine grade powder coating offers maximum resilience in exterior environments.

EXTERIOR & LANDSCAPE LIGHTING

B-SIDE BOLLARD

• B-Side LED is a family of bollards designed to light public and private areas, thanks to its self-illumination, can act as an ambient light and a space-structuring element.

• It is specifically designed for LED light sources

• 2700k Super Warm White, CRI: 80, IP67

• Lifespan: 50,000hrs

• Beam Angle: 25° Tilt Angle: 90°

TIVAH TRI COLOUR LED GARDEN SPIKE LIGHT

• Single Adjustable Garden Spike Spotlight

• 90° Tilt & 270° Swivel

• TRI Colour

• IP rating: IP65

• 2 Years Replacement Warranty

• 7W. 470lm. 2700K. Dimmable.

• Spot Diameter: D56mm. Height: H122mm.

• Spike: L200mm.

• CRI80. 50,000 hour lifespan.

MOUNTING BLOCKS

FOR WEATHERBOARD / CORRUGATED IRON

The Sureset Mounting Block range is made of high quality UV stabilized material to withstand New Zealand conditions. Note: These items must be fastened through the mounting block – not simply to the mounting block. Scan the QR Code to find out more about Sureset bounding blocks.

HORIZONTAL & VERTICAL CORRUGATED MOUNTING BLOCKS

CORRUGATED MOUNTING BLOCKS - MULTI PURPOSE

MOUNTING BLOCK FOR WEATHERBOARD

MOUNTING BLOCK FOR MINI ORB

IDEAL CODE DESCRIPTION

A. SSTHCMBBK Sureset Mounting Block 84x114 Horizontal BLK For Corrugated Iron

B. SSTHCMBLG Sureset Mounting Block 84x114 Horizontal Light Grey For Corrugated Iron

C. SSTVCMBBK Sureset Mounting Block 84x114 Vert BLK For Corrugated Iron Vertical

D. SSTVCMBLG Sureset Mounting Block 84x114 Vert Light Grey For Corrugated Iron

E. SSTCMBBK Sureset Mounting Block 122mm2 BLK For Corrugated Iron

F. SSTCMBDG Sureset Mounting Block 122mm2 Dark Grey For Corrugated Iron

G. SSTCMBLG Sureset Mounting Block 122mm2 Light Grey For Corrugated Iron

H. SSTCMBWH Sureset Mounting Block 122mm2 WHT For Corrugated Iron

I. SSTWBMB Sureset Mounting Block 84x114 Vert Light Grey For Weatherboard

J. SSTMOMB Sureset Mounting Block 122mm2 MINI Light Grey For Mini Orb Corrugated Iron

• A.

• B.

• E.

• F.

• G.

• H.

• D.

• C.

• J.

• I.

MOVEMENT SENSOR RECESSED 6M, 8M

• Weatherproof PIR IP66 motion sensor to be installed outdoors near entry ways

• 180° head swivel, Ideal for driveway lights

• 2400W, 110°scan - 18m range detection

IDEAL CODE COLOUR

HPM63093W Ivory

LIGHT PATROL SEC SENSOR

• 450-1200W, auto 180deg scan

• 12m range, 180° Field of view

• Energy Saving, Adjustable Lux And Time Setting

• For Outdoor or Indoor Lights, Ideal for hallways, walk-in wardrobes & garages

IDEAL CODE COLOUR

HPM6303A (Auto only) White

AQUASCAN 3 WIRE SENSOR 44 IP

HPM6303 White

SENSOR OVERRIDE SURF

• PIR movement sensor

• 12m range detection maximum, low power consumption, Ideal for hallways, walk-in wardrobes & garages

IDEAL CODE COLOUR

HPM630SM01WE White

HPM630SM01BL Black

HPM63093W

GIVING BACK TO OUR KIWI COMMUNITIES

SENSOR SURF MOUNT 8M

• 360° PIR Movement Sensor

• 6m and 8m range detection maximum

• IP20, 230-240V a.c. 50Hz

• Ideal for hallways, walk-in wardrobes & garages, Adjustable Lux Sensitivity - Daylight to dark

HPM630S02WE 8M White

HPM630S01BL 6M Black

HPM630S01WE 6M White

SENSOR RECESSED

• Recessed 360° PIR Movement Sensor ideal for hallways, walkin wardrobes and garages.

• Base Unit Dimensions: 78mm W x 61mm H x 71mm D, flush mounted

HPM630R01WE

HPM630R02WE

HPM630R01WE 6M White

HPM630R02WE 8M White