▲
PRODUCTS
exteriors EDITORS’ CHOICE
Patterned roofing FiberTite Brite: • Custom-printed roofing patterns • Kynar fluoropolymer top finish • Create a 3D façade
FiberTite Brite roofing features custom-printed patterns with a Kynar fluoropolymer top finish, allowing roof design that complements overall building design. Using advanced and proprietary coating technology, the roofing uses multiple colors and complex patterns that create a 3D façade. It can reportedly fit even the most intricate roof. Seaman Corp., Wooster, OH Circle 99
Low-slope roof repair
Foil-faced foam sheathing
AP (All Purpose) foil-faced foam sheathing board is a closed-cell polyisocyanurate foam core bonded on each side to a foil facer. One side has a printed foil reflective facer and the other side has a printed non-reflective foil facer. Used where high thermal efficiency is required in new and retrofit construction, applications include interior insulation behind gypsum board, exterior insulation, masonry cavity wall insulation, and behind exterior stucco or lath systems. The product is lightweight and noncorrosive.
SmartFlash EZ Patch is a single-component, high-performance, self-terminating cold liquid applied membrane that patches leaks and cracks on flat and sloping surfaces. The UV-stable, pre-saturated self-adhering product contains one part urethane and is fleece reinforced. A package contains latex gloves and a fleece patch approximately 16 x 10 1/2 in. that can be used on bitumen, single-ply membranes, concrete, wood, and metal roofing surfaces. The patch cures in 48 hr.
Flashing and sealant
Liquidarmor CM flashing and sealant is said to provide advanced moisture and air-sealing protection. The elastomeric spray forms a tight, seamless barrier along the rough openings of windows and doors while helping to reduce labor time. Hard-to-reach gaps as wide as 1/4 in. can be sealed. The water-based coatings can be used on a range of surfaces including foam boards, steel studs, concrete masonry units, and wraps.
CertainTeed Corp., Valley Forge, PA Circle 102
Dow Building Solutions, Midland, MI Circle 101
Johns Manville, Denver Circle 100
Insulated wall system
StoTherm ci XPS is a high-performance insulated wall system that uses StoGuard liquid-applied air and moisture barrier and Dow Styrofoam panel core 20 insulation. Said to lower energy costs and reduce a building’s carbon footprint, the system has a wide range of decorative and protective finishes available in a variety of colors. Sto TurboStick foam adhesive attaches the insulation board and prevents thermal bridging from mechanical fasteners.
Self-leveling joint sealant
Sto Corp., Atlanta Circle 103
26
COMMERCI A L BUIL DING P RODUC T S
JAN/FEB 2015
cbpmagazine.com
Pourthane SL is an elastic, one-component, self-leveling polyurethane sealant for use as a multi-purpose horizontal joint sealant. Said to be resistant to aging and weathering, it seals expansion joints in concrete and cementitious slabs including sidewalks, balconies, plazas, and runways. W.R. Meadows, Hampshire, IL Circle 104
