1 minute read
Read Device Information (RDDEVINFO)
The SETFLAG Command (Operation Code 04)
This operation code has been preceded by SET_FLAGA(operation code 27).
The SETFLAG serial command can be used to turn on a specified input, output or to set a specified user flag.
Packet sent to the ESC:
[Header][Flag Type][Flag Number][Checksum]
Flag Type: A 2-byte value indicating the Flag Type to be set.
Flag Number: A 2-byte value indicating the logical Flag Number to be set.
The Packet Body Length is 4 bytes.
Packet returned by the ESC:
