External iGuzzini lighting systems 2009-2010 - PART 2

Architectural Lighting

Photo: Giuseppe Saluzzi

iGuzzini

Gradara (PU) - Italy: Gradara historical district

261

ColourWoody design Mario Cucinella

iGuzzini

The product has been awarded the following prizes: - Intel Design 2003 - ADI Design Index 2003

Light directing, dynamic photometry and colour changing: the new light for architecture, towns and commercial spaces requires flexible and reliable systems that can be easily managed even with many light sources and fixtures. ColourWoody was designed to produce dynamic colour effects on large and small surfaces, stressing volumes and building elements. It has great potential applications thanks to the network diagnostic, programming and management system. The variable sequences in both dynamics and effect intensity, the simple management of the configuration and operation system, and the user-friendly programming interfaces are the features that characterise the network ColourWoody. Each ColourWoody fitting has an integrated electronic board with LonWorks速 interface.

All network-connected fittings are characterised by identification addresses. A new application standard has been developed for user-friendly (even provisional) programming and managing of light effects. From a simple colour sequence to the complex time-line programming based on rolling, looping and effect sequences, the ColourWoody System brings architectural lighting closer to the creation of moving scenarios. This makes it possible to interpret the most diverse languages according to time and emotions, adding value to volumes and surfaces. The variable interaction between architecture and environment as well as between meanings and intensity levels provides multiple landscapes where light is the tool used to produce new directions and possibilities.

ColourWoody spot

ColourPlayer: light control system

ColourWoody superspot

The ColourWoody technology with dichroic tubes has two major objectives: the variation of 6 main colours without the use of additional lenses, extremely high photometric yield that is simply not possible using traditional colour change systems.

263

ColourWoody design Mario Cucinella

iGuzzini

The two main optics of ColourWoody are: Superspot (SS) and Medium (M). Other photometric distributions can be obtained with the addition of accessories: Spot (S) and Flood (F). The refractor accessory, moreover, permits two distributions: Light Sliver (LS) and elliptical (E).

This particular operational flexibility makes it possible to highlight details or illuminate entire buildings; the refractor, for example, just one of the accessories available, designs blades of light that are ideal for chromatic highlighting of particular architectural devices.

Superspot Optic (SS) The use of this optic makes it possible to optimise definition of architectural features, eliminating stray light. It is ideal for long distance applications and highlighting features of reduced dimensions. • Highlighting of pilaster strips and columns by means of flat trajectory light. • Highlighting of architectural features by means of distanced positioning of projectors.

Spot Optic (S) This optic makes it possible to define architectural features, combating stray light. It is particularly suitable for applications spaced closely together and for highlighting of features of medium dimensions. • Highlighting of pilaster strips and columns by means of flat trajectory light. • Highlighting of architectural features by means of distanced positioning of projectors.

Light Sliver Optic (LL) The optic can be used to illuminate vertical architectural features. • Narrow lanes and streets. • Particularly high, narrow towers or bell towers. • Horizontal surfaces with accent lighting.

Medium Optic (M) The optic enables downward or upward illumination of facades of tall buildings, in addition it enables illumination of pedestrian areas from the top of adjacent buildings, with excellent distribution of lightflow over the surface • Highlighting of towers and bell towers. • Highlighting of town squares.

Flood Optic (F) The best use of this optic is for lighting of large outdoor spaces; in addition it is able to provide compensation lighting. • Facades and buildings. • Industrial buildings.

Elliptical Optic (E) This optic combines the characteristics of the light sliver optic with those of the medium optic, and is suitable for illuminating both horizontal and vertical surfaces. • Horizontal and vertical surfaces with soft lighting.

264

ColourWoody design Mario Cucinella

iGuzzini

ColourBasic ColourBasic is the software the permits the installation and configuration of a series of ColourWoody fittings on a LonWorks® network by assigning each device or group of projectors a network address that makes instruction routing and programming easy.

Dubai - United Arab Emirates: Hotel Gran Hyatt

Description of the features • Reading and resetting diagnostic data • Network analysis • Modifying and assigning addresses to projectors • Creation of groups • Execution of colour programs (show number) preset in electronic board • Setting starting show number (power ON) • Reading identification data of products • Password • Withdrawal of tubes for lamp replacement • Advancing supports for dichroic filter installation.

Diagnostic information on individual fittings can be accessed through ColourBasic. The application is multilingual and access to the software is password-protected. It must be used together with the PC interface code 9898.

ColourBasic cd Supplied with PC interface

ColourShow The software ColourShow makes it possible to create scenes, sequences and colour effects through a userfriendly PC interface (cod. 9898) that displays and assists in programming networked ColourWoody fittings. The application is multilingual and access is protected by a password and USB hardware key.

Colour effects • Single Colour: static display of one colour

Dubai - United Arab Emirates: Hotel Grand Hyat

• Cross Preset: linear transition from one colour to another • Free Roll: random colour projection at specific intervals • Basic Loop: soft transition from one colour to another according the continuous spectrum of dichroic cylinders. • Planned Loop: gradual transition from one colour to another through the colours selected by the user. ColourShow cd Double operating mode upon request.

Description of the features • It includes all network configuration functions belonging to ColourBasic • Live show (real-time sequence composition recalling basic colours) • Direct movement of dichroic filters • Making new colours • Daily/weekly programming • Group creation/modification • Show starting/execution • Making colour effects

• Insertion of map for synoptic view with interactive product icons • Show preview on map • Saving and loading programmed shows • Password • Further protection by USB hardware key.

265

ColourWoody design Mario Cucinella

System architecture Operation by means of protocol LonWorks®

iGuzzini

The ColourWoody System permits thoroughly controlling the products either by PC software (ColourBasic and ColourShow) through a table interface or by the wall-mounted panel "ColourPlayer". The same simultaneous show on all the products (by selecting the number of the pre-installed program on the electronic board) or different shows for each product can be set.

You can also work in live mode to change the colours on the devices either individually or in groups. Scenes and sequences modifiable over time can be programmed through PC software. Pre-developed scenes/sequences can be recalled (through database maintenance) and sequences/activations can be scheduled at the time specified.

System architecture with use of PC: • Large systems • Great programming flexibility • Possible generation of new shows/effects Interface PC + software ColourBasic code 9898 PC

network LonWorks

®

code 9901 software ColourShow

System architecture with ColourPlayer control panel: • Medium-sized systems • Medium frequency or calendar programming (188 shows)

Panel ColourPlayer code 9899

network LonWorks

®

Wall-mounted ColourPlayer panel Control panel plus thermoplasticmaterial box to be recessed into the wall. The DIN bar ballast is not included. An outlet for the network LonWorks®.

Weekly programming by means of ColourPlayer any colour program on any etworked fitting is turned on/off at the time specified.

266

PC interface: Desk device with external wallmounted 12V supply. It allows for connecting a PC to the network with ordinary USB. The software specified uses this interface and runs on any machine equipped with a Microsoft operating system (2000/XP/NT). The software takes advantage of all the features and new performances made available by the network system (software ColourBasic e ColourShow).

Features of ColourPlayer Calendar programming is the main function of the Colour Player panel, and is used to save a sequence of timed Show commands. The system can be turned on or off either manually or through the programme by using one command. ColourPlayer permits starting the shows memorised in the projectors. It is equipped with a large permanent memory and battery that maintain date/time also in the event of power failure.

ColourWoody design Mario Cucinella

iGuzzini

Operation with Dip Switch ColourWoody projectors can work in a network system but also in stand-alone mode. The individual fittings can execute the sequences pre-stored in the electronic board without connection to a LonWorks® network.

System architecture in stand-alone mode with dip switch • Small systems • Occasional programming

4

1

5 6

5

4

3

6

5

3

6

2

7

2

7

2

7

1

8

1

8

1

8

0

Manual programming of individual projectors by means of the dip-switch. By setting the switch to position 1 (Stand Alone) you can recall a colour program pre-stored in the electronic board of the fitting. The combination of the positions of the dip-switch selectors selects the pre-set show numbers in the range 1-188 and directs them based on the following variability type: 15 colour sequences, 4 colour permanence times, 3 colour change times.

4

3

9

0

9

0

9

Stand-alone synchronisation on ignition (Power ON) The board installed on the fittings has SYNCRHONIZED TIMING functions. It synchronises over time the show that was set and executed by several products in stand-alone mode - not networked.

Operation with DMX 512 The DMX interface is a table device with wall-mounted external ballast 12V. It is connected to devices such as light mixers and PC-software interfaces that use protocol DMX512. The converter translates the commands sent via DMX into commands on the LonWorks® network.

System architecture with device DMX512 • Interfaces with systems DMX Converter DMX512 code 9897 network LonWorks

Device DMX512

®

The converter only has the following addresses for conversion.

DMX addresses 1 9 17 25 33 41 49 57

4

5

4

3

0

6

5

4

3

6

65 73 81 89 97 105 113 121

2

7

2

7

1

8

1

8

1

8

0

9

257 265 273 281 289 297 305 313

321 329 337 345 353 361 369 377

385 393 401 409 417 425 433 441

449 457 465 473 481 489 497 505

6

7

9

193 201 209 217 225 233 241 249

5

3

2

0

129 137 145 153 161 169 177 185

0

9

Directing of individual projectors - manually by dip-switch. By setting the switch to position 0 (address) you can assign an address to the projectors connected to the network. • 0: Address NETWORK (MODE) • 1:ShowNumber STAND ALONE

267

ColourWoody design Mario Cucinella

PROFESSIONAL FITTINGS WITH DYNAMIC COLOUR CHANGES iGuzzini

Self-diagnostic

Roma - Italy: Casa del Jazz

268

Photo: Giuseppe Saluzzi

• Luminaire for dynamic lighting, for use with discharge and metal halide lamps that come equipped with the product. • The fixture is installed into the ground or wall-mounted (with a fisher). • The fixture has an optical assembly and its own support. • Tempered glass optical assembly; die-cast aluminium frame; steel retention cable; silicone gaskets; and captive screws. Double nickelplated (M24 x 1,5) ideal for cables with diameters from 7 to 16 mm. Motor-control circuit board with embedded microprocessor and nonerasable control-logic located in the lower portion of the spotlight chassis. Cast aluminium structure, painted with liquid paint, resistant to UV rays and atmospheric agents. Vertical orientation joint with support made of corrosion-resistant steel, painted with an acrylic liquid paint. 10° increment graduated scale with mechanical locking blocks made of galvanized and painted steel. Horizontal orientation joint with hot galvanized and painted plate. Multi-chromatic tubes, co-axial with the lamp, for the colour variation. The motion can be controlled by the motor-control circuit board via the LonWorks ® network that allows custom programming of the colour variation (ColourPlayer), via software (PC Interface), configured for network transmission protocol DMX512 (DMX Interface) or Dip-Switch (stand-alone). • 99,98 % ultrapure aluminium reflector, bright-finish with anodic treatment. • Galvanized and painted steel spill-ring or anti-glare shield, flap, visor, and other accessories. • Pull-out control gear plate made of galvanized steel; power supply with a non-explosive power factor correction capacitor, ballast, starter, and quick-connecting terminals. • All screws are A2 stainless steel. • Automatic diagnostic firmware for functionality check with display on small LED panel. • The technical characteristics of the fitting comply with EN60598-1 standard. • IP66 IK08 • F seal • IMQ-ENEC approval • Class of Insulation II

ColourWoody design Mario Cucinella

PROFESSIONAL FITTINGS WITH DYNAMIC COLOUR CHANGES iGuzzini

03

D4

optics ƒ

IP66 IK08 :

The products come complete with lamp and are designed to be connected to LonWorksÂŽ networks. For maximum visual perfection of the spectrum of intermediate colours it is however advisable to use diffuser lenses.

ƒ +,7 &'0 7 * D ƒ

,PD[ FG .OP ƒ

:

ƒ +,7 * ( (

D

G

(P

(PD[

/X[ .OP

ƒ

ƒ

K

ø 380

/X[ .OP ƒ

ƒ

618

,PD[ FG .OP

550

lamp

Floodlight complete with dip-switch 5742 150 W HIT (CDM-T) F 5748 250 W HIT (G.E.) F

487,5

code

ƒ

K

G

(P

(PD[

535

All photometric data refers to white light: 4200K (150 W), 3000K (250 W) Transmission index (K) Colour

K

White Magenta Cyan Red Green Blue Yellow

1 0,10 0,45 0,07 0,35 0,03 0,75

components code

code

Signal converter DMX512 with connection cables and ballast complete with plug 9897

Control panel ColourPlayer (12 Vdc) with wall-recessed box 9899

Available in colour 15

Available in colour 15 Without ballast

PC interface with connection cables and ballast complete with plug and software ColourBasic 9898

Signal amplifier (12 Vdc) for application on DIN guide 9900

Available in colour 15

Without ballast

Software Colourshow to program colour scenes 9901 para 9898

Ballast 12 Vdc for application on DIN guide (230V, 50/60 Hz) 9903 for 9899-9900

Available in colour 00

Available in colour 00

Available in colour 15

Net control cable L=50 m 9902 Available in colour 00

269

ColourWoody design Mario Cucinella

PROFESSIONAL FITTINGS WITH DYNAMIC COLOUR CHANGES iGuzzini

accessories code

optic ,PD[ FG .OP

Refractor for elliptical distribution of the light flow 1196 LL

ƒ

ƒ

& /X[ .OP ƒ

Available in colour 24 :

ƒ +,7 &0' 7 * D ƒ ƒ

,PD[ FG .OP

LL

ƒ

ƒ

ƒ

ƒ D

ƒ ƒ

,PD[ FG .OP

E

ƒ

:

ƒ +,7 &'0 7 * D ƒ ƒ

,PD[ FG .OP

E

ƒ

:

ƒ +,7 * ( (

Diffusing glass 1159

D

ƒ ƒ

,PD[ FG .OP ƒ

Available in colour 65 :

ƒ +,7 &'0 7 * D ƒ

,PD[ FG .OP

:

ƒ +,7 * ( (

ƒ

K

G

G (P (PD[

K

G

G (P (PD[

K

G

G (P (PD[

K

G

(P

(PD[

ƒ

K

G

(P

(PD[

Visor 5941

Ground anchoring plate 5951

Available in colour 15

Available in colour 15

Single directional flap 5938

Accessory retention cable 5949

Available in colour 04

Available in colour 00

Protection grid 5944 Available in colour 78

270

D

/X[ .OP ƒ

ƒ

/X[ .OP ƒ

ƒ

F

& /X[ .OP ƒ

ƒ

G (P (PD[

& /X[ .OP ƒ

ƒ

G

& /X[ .OP

: +,7 * ( (

K

ColourWoody superspot design Mario Cucinella

PROFESSIONAL FITTINGS WITH DYNAMIC COLOUR CHANGES

iGuzzini

E max

ø cone

α

0

60 m

120 m

180 m

240 m

ø cone Emed Emax ø cone Emed Emax ø cone Emed Emax ø cone Emed Emax (m) (lux) (lux) (m) (lux) (lux) (lux) (lux) (m) (lux) (lux) (m)

code

lamp

5758

150W HIT (CDM-T) α=3°

3,6

140

190

7,1

38

51

10,7

13

25

14,2

9

12

5760

250W HIT (G.E.) α=5°

4,4

169

232

8,9

44

58

13,4

20

26

17,8

11

15

• Luminaire for dynamic lighting, for use with discharge and metal halide lamps that come equipped with the product. • The fixture is installed into the ground or wall-mounted (with a fisher). • The fixture has an optical assembly and its own support. • Tempered glass optical assembly; die-cast aluminium frame; steel retention cable; silicone gaskets; and captive screws. Double nickelplated (M24 x 1,5) ideal for cables with diameters from 7 to 16 mm. Motor-control circuit board with embedded microprocessor and nonerasable control-logic located in the lower portion of the spotlight chassis. Cast aluminium structure, painted with liquid paint, resistant to UV rays and atmospheric agents. Vertical orientation joint with support made of corrosion-resistant steel, painted with an acrylic liquid paint. 10° increment graduated scale with mechanical locking blocks made of galvanized and painted steel. Horizontal orientation joint with hot galvanized and painted plate. Multi-chromatic tubes, co-axial with the lamp, for the colour variation. The motion can be controlled by the motor-control circuit board via the LonWorks® network that allows custom programming of the colour variation (ColourPlayer), via software (PC Interface), configured for network transmission protocol DMX512 (DMX Interface) or Dip-Switch (stand-alone). • 99,98 % ultrapure aluminium reflector, bright-finish with anodic treatment. • Galvanized and painted steel spill-ring or anti-glare shield, flap, visor, and other accessories. • Pull-out control gear plate made of galvanized steel; power supply with a non-explosive power factor correction capacitor, switch, reactor, and quick-connecting terminals. • All screws are A2 stainless steel. • Automatic diagnostic firmware for functionality check with display on small LED panel. • The technical characteristics of the fitting comply with EN60598-1 standard. • IP66 IK08 • F seal • IMQ-ENEC approval • Class of Insulatio II The ColourWoody Superspot optical system makes it possible to direct the light flow in such a way as to highlight far-away architectural details. Values refer to white light.

271

ColourWoody superspot design Mario Cucinella

PROFESSIONAL FITTINGS WITH DYNAMIC COLOUR CHANGES

iGuzzini 03

D4

lamp /X[ .OP

ƒ

ƒ

ƒ

IP66 IK08 :

ƒ

The products come complete with lamp and are designed to be connected to LonWorksÂŽ networks. For maximum visual perfection of the spectrum of intermediate colours it is however advisable to use diffuser lenses.

+,7 &'0 7 * D ƒ

,PD[ FG .OP ƒ

:

ƒ +,7 * ( (

D

G

(P

(PD[

/X[ .OP

ƒ

ƒ

K

ø 484

,PD[ FG .OP

Floodlight complete with dip-switch 5758 150 W HIT (CDM-T) 5760 250 W HIT (G.E.)

ƒ

K

G

(P

(PD[

553

All photometric data refers to white light: 4200K (150 W), 3000K (250 W) Transmission index (K) Colour

K

White Magenta Cyan Red Green Blue Yellow

1 0,10 0,45 0,07 0,35 0,03 0,75

components code

code

Signal converter DMX512 with connection cables and ballast complete with plug 9897

Control panel ColourPlayer (12 Vdc) with wall-recessed box 9899

Available in colour 15

Available in colour 15 Without ballast

PC interface with connection cables and ballast complete with plug and software ColourBasic 9898

Signal amplifier (12 Vdc) for application on DIN guide 9900

Available in colour 15

Without ballast

Software ColourShow to program colour scenes 9901 for 9898

Ballast 12 Vdc for application on DIN guide (230V, 50/60 Hz) 9903 for 9899-9900

Available in colour 00

Available in colour 00

Available in colour 15

Net control cable L=50 m 9902 Available in colour 00

272

670

code

ColourWoody superspot design Mario Cucinella

PROFESSIONAL FITTINGS WITH DYNAMIC COLOUR CHANGES

iGuzzini

accessories code

optic ,PD[ FG .OP

Refractor for elliptical distribution of the light flow 1197 LL

ƒ

ƒ

& /X[ .OP ƒ

Available in colour 24 :

ƒ +,7 &'0 7 * D ƒ ƒ

,PD[ FG .OP ƒ

ƒ

ƒ

ƒ

Diffusing glass 1162

D

ƒ ƒ

,PD[ FG .OP ƒ

ƒ

S

:

ƒ +,7 &'0 7 * D ƒ

,PD[ FG .OP ƒ

:

ƒ +,7 * ( (

D

ƒ

G (P (PD[

K

G

G (P (PD[

/X[ .OP ƒ

Available in colour 65

ƒ

G

& /X[ .OP

: +,7 * ( (

K

K

G

(P

(PD[

/X[ .OP ƒ

K

G

(P

(PD[

Visor 5942 Available in colour 15

Single directional flap 5939 Available in colour 04

Protection grid 5945 Available in colour 78

Ground anchoring plate 5951 Available in colour 15

Accessory retention cable 5949 Available in colour 00

273

Pole application

Ground installation

Large and small optical assembly

274

Wall-washer screen

Baffle

Lingotto design Renzo Piano

iGuzzini

Wall application

Wall application

The design project draws its inspiration from a basic geometric shape: an irregular truncated pyramid made of cast aluminium. All the elements comprising the lamp are highlighted without resorting to purely aesthetic means. In this sense, Lingotto optimises the

link of the image of the product with the various lighting engineering requirements. The fitting comprises two essential parts: the light source fitted with a special reflector and a bar on which the optical assembly can be rotated with a bolt.

Ground installation

275

Lingotto design Renzo Piano

iGuzzini

Installation outdoors is possible with two solutions: the floodlight, equipped with three different optics (asymmetrical, flood and medium) designed to adapt themselves to the most varied of spaces and the wall-mounted unit which only uses the flood optic.

A silicon sealing gasket ensures an IP 66 degree of protection. The luminous flux emitted upwards by the Lingotto luminaire pointing downwards with 0 angle is nil.

Asymmetrical optic (A) Emits its greatest intensity of light at 45째. It is suitable for lighting up urban areas because, in limiting direct glare, it enables large spaces to be illuminated without producing stray light striking the fronts of buildings.

HIT-DE 250 W Fc2 L2

ill. ab. L1xL2

Emax

Emed

4m

5 x 10 m

280 lux

160 lux

6m

7 x 14 m

120 lux

80 lux

8m

9 x 18 m

80 lux

40 lux

d

ill. ab. L1xL2

Emax

Emed

4m

3,5 x 8 m

340 lux

175 lux

6m

5 x 12 m

155 lux

77 lux

8m

7 x 16 m

88 lux

45 lux

d L1

d

Flood optic (F) Provides a broad, uniform light which is particularly suitable for illuminating squares, facades and large spaces

HIT-DE 250 W Fc2

L2

L1

d

Emed = average lighting in the area Emax = imax lighting in the area

276

Lingotto

FLOODLIGHTS iGuzzini

control gear box is connected to the optical assembly by a armoured braided steel cable. Polymeric grey plastic PG11 cable clamp and brass PG11 on the other end. • Pull-out aluminium control gear plate, subjected to a pre-anodizing and degreasing treatment; power supply with a non-explosive power factor correction capacitor, ballast, starter, and quick-connecting terminals. • There is no light dispersion into the upper hemisphere above this luminaire • All screws are A2 stainless steel. • Rod with wishbone end and grey-painted galvanized steel articulated joint. • The technical characteristics of the fitting comply with EN60598-1 standard. • IP66 IK07 • F seal • IMQ-ENEC approval • IMQ Performance • Class of Insulation II

Photo: Giuseppe Saluzzi

• Direct lighting luminaire for use with metal halide, sodium discharge and halogen lamps • The fixture is installed into the ground or wall-mounted. • Lingotto has an optical assembly, a control gear box (for models with discharge lamps), and an arm. • Optical assembly and aluminium glass-holding frame, especially designed for perfect coupling to the chassis, with dual phosphoruschromium plating of the base metal, followed by passivation heat treatment at 120° C, grey painting, curing at 150° C. Sodium-calcium tempered sealing glass, colourless and transparent. An articulated joint is used to adjust the vertical orientation of the cover with 180° range, and the horizontal orientation with 360° range. Steel retention cable, diameter of 1,6 mm, plasticcoated. 50 Shore silicone-coated black gasket; parabolic reflector made of aluminium sheet with a high-bright natural finish. An optional painted aluminium

Ascoli Piceno - Italy: Piazza del Popolo

design Renzo Piano

Adjustable product

277

Lingotto design Renzo Piano

FLOODLIGHTS iGuzzini

03

73

optic ,PD[ FG .OP

& J ƒ /X[ .OP ƒ

ƒ

ƒ

IP66 IK07 :

ƒ +,7 '( 5[ V

D

ƒ ƒ

K

G

G (P (PD[

500

lamp

Floodlight - Small optical assembly 7027 150 W HIT-DE F 150 W HST-DE F

260

code

147 180

ƒ

ƒ

:

ƒ ƒ ƒ

ƒ

IP66 IK07

:

ƒ +,7 '( )F

D

ƒ ƒ

ƒ

ƒ

ƒ D

ƒ ƒ

,PD[ FG .OP

Floodlight - Large optical assembly 7019 250 W HIT-DE A 250 W HST-DE 7020 400 W HIT-DE A

ƒ

IP66 IK07

:

ƒ +,7 '( )F

D

ƒ ƒ

,PD[ FG .OP

:

ƒ +,7 '( )F

278

D

ƒ ƒ

K

G

G (P (PD[

K

G

230 G (P (PD[

K

G

G (P (PD[

& J ƒ /X[ .OP ƒ

ƒ

& J ƒ /X[ .OP ƒ

ƒ

& J ƒ /X[ .OP

: +,7 '( )F

147

,PD[ FG .OP ƒ

& J ƒ /X[ .OP ƒ

ƒ

600

,PD[ FG .OP

Floodlight - Large optical assembly 7029 250 W HIT-DE F 250 W HST-DE 7030 400 W HIT-DE F

G (P (PD[

310

D

ƒ

K

G

G (P (PD[

350

+,7 '( 5[ V

G

120

IP66 IK07

K

270

& J ƒ /X[ .OP ƒ

120

,PD[ FG .OP

Floodlight - Small optical assembly 7017 150 W HIT-DE A 150 W HST-DE A

Lingotto design Renzo Piano

FLOODLIGHTS iGuzzini

accessories and installation systems code ,PD[ FG .OP

Baffle 1177 for 7017-7027 Available in colour 04 The photometric curve refers to the flood optic.

D

ƒ ƒ

,PD[ FG .OP

:

ƒ D

G

G (P (PD[

ƒ ƒ

& J ƒ /X[ .OP ƒ

ƒ

+,7 '( )F

K

ƒ

+,7 '( 5[ V

Available in colour 04

Wall-washer screen 1175 for 7019-7020-7029-7030 1176 for 7017-7027

ƒ

:

Baffle 1178 for 7019-7020-7029-7030

The photometric curve refers to the flood optic.

& J ƒ /X[ .OP ƒ

ƒ

ƒ

K

G

G (P (PD[

Steel plate for fixing to wall 1172 Available in colour 00

Available in colour 04 Steel flange for attaching to pole ø 40 ø 60 mm 1170 Steel flange for attaching to pole ø 60 ø 102 mm 1171

Cast-iron plate for fixing to ground and/or wall 1173 Available in colour 15

Available in colour 00 Bolts with plate for fixing to ground 0456 for 1173 Available in colour 00

279

Lingotto design Renzo Piano

FLOODLIGHTS iGuzzini

03

73

optic ,PD[ FG .OP

& J ƒ /X[ .OP ƒ

ƒ

ƒ

:

ƒ 47 '( 5[ V

D

ƒ ƒ

,PD[ FG .OP

Floodlight - Small optical assembly 7018 300 W QT-DE A

G (P (PD[

ƒ

:

ƒ 47 '( 5[ V

D

& J ƒ /X[ .OP ƒ

ƒ

IP66 IK07

Complete with electrical wire L=450 mm

G

IP66 IK07

Complete with electrical wire L=450 mm

K

ƒ ƒ

K

G

G (P (PD[

accessories code ,PD[ FG .OP

Baffle 1177

& J ƒ /X[ .OP ƒ

ƒ

Available in colour 04

The photometric curve refers to the flood optic Wall-washer screen 1176 Available in colour 04

ƒ D

K

G

G (P (PD[

: 47 '( 5[ V

ƒ

ƒ ƒ

Steel plate for fixing to ground and/or wall 1174 for 7018+1179-7028+1179 Available in colour 15

Fixing box with terminal board 1179

Bolts with plate for fixing to ground 0456 for 1174

Available in colour 15 Available in colour 00 Steel flange for attaching to pole ø 40 a ø 60 mm 1170 Steel flange for attaching to pole ø 60 a ø 102 mm 1171 for 7018+1179-7028+1179 Available in colour 00

280

240

lamp

Floodlight - Small optical assembly 7028 300 W QT-DE F

170 215

270

code

Lingotto design Renzo Piano

FLOODLIGHTS iGuzzini

03

73

optic ,PD[ FG .OP

& J ƒ /X[ .OP ƒ

ƒ

ƒ

IP66 IK07 :

The electrical connections between the control gear box and the floodlight are achieved through an armoured cable.

ƒ +,7 '( 5[ V

D

ƒ ƒ

G

G (P (PD[

695

,PD[ FG .OP

Floodlight - Small optical assembly 7013 300 W QT-DE F

& J ƒ /X[ .OP ƒ

ƒ

ƒ

K

G

G (P (PD[

IP66 IK07

Complete with electrical wire L=600 mm

K

680

lamp

Floodlight - Small optical assembly 7012 150 W HIT-DE F 150 W HST-DE

:

ƒ 47 '( 5[ V

D

ƒ ƒ

680

code

695

accessories code ,PD[ FG .OP

Baffle 1177

& J ƒ /X[ .OP ƒ

ƒ

ƒ

Available in colour 04

ƒ D

ƒ ƒ

,PD[ FG .OP

ƒ

ƒ ƒ ƒ

K

G

G (P (PD[

: D

G (P (PD[

& J ƒ /X[ .OP ƒ

ƒ

47 '( 5[ V

G

: +,7 '( 5[ V

K

Wall-washer screen 1176 Available in colour 04

Connection box 1180 for 7013 Available in colour 15

281

Lingotto design Renzo Piano

FLOODLIGHTS iGuzzini

7027

7027+1177

Lux h=5 m. α =0°

Lux h=5 m. α =0°

201 130 62 26 11

125 86 51 35 21 10

HIT-DE Rx7s 150W

HIT-DE Rx7s 150W

-10

-8

-6

-4

-2

0

2

4

6

8

10 m

-5

-4

-3

-2

-1

7029

0

1

2

3

4

5

m

7029+1178

Lux h=5 m. α =0°

Lux h=5 m. α =0°

284 183 88

HIT-DE Fc2 250W

-10

-8

-6

-4

-2

0

2

4

36 16

6

8

198 170143

HIT-DE Fc2 250W

10 m

-5

-4

-3

-2

-1

7030

0

1

93 70 49

2

3

4

31

5

m

7019

Lux h=5 m. α =0°

Lux h=5 m. α =0°

165 106 51

398 256 123 51 23

HIT-DE Fc2 400W

-10

-8

-6

-4

-2

0

2

4

6

8

21 10

HIT-DE Fc2 250W

10 m

-10

-8

-6

-4

-2

7020

0

2

4

6

8

10 m

7028

Lux h=5 m. α =0°

Lux h=5 m. α =0°

87 231 149 72

63

44

27 20 14

30 13

HIT-DE Fc2 400W

QT-DE 12 Rx7s 300W

-10

-8

-6

-4

-2

0

2

4

6

8

10 m

-5

-4

-3

-2

-1

7028+1177

0

1

2

3

4

5

m

8

10 m

8

10 m

7012

Lux h=5 m. α =0°

Lux h=5 m. α =0°

201 130 62 26 11 47

QT-DE 12 Rx7s 300W

-5

-4

-3

-2

-1

0

38 23

1

2

9

4

3

4

HIT-DE Rx7s 150W

5

m

-10

-8

-6

-4

-2

7012+1177

0

2

4

6

7013

Lux h=5 m. α =0°

Lux h=5 m. α =0°

90 68 37 19 11 5 106 86 51

HIT-DE Rx7s 150W

-5

-4

-3

-2

-1

0

1

2

21

10

3

4

QT-DE 12 Rx7s 300W

5

m

5

m

7013+1177 Lux h=5 m. α =0°

47

QT-DE 12 Rx7s 300W

-5

282

-4

-3

-2

-1

0

38 23

1

2

9

4

3

4

-10

-8

-6

-4

-2

0

2

4

6

Architectural Lighting

Photo: Matjaˇz Kaci ´ cnik ´

iGuzzini

Cairo - Egypt: Moschea Sultan Hassan & Rifai Lighting project: Arch. Simon Simos Laboratoire d’Eclairagisme Ecole d’Ingénieurs de Genève (HES-SO)

283

Woody page 288 (Pole application)

Woody page 288 (Ground installation)

Woody page 288 (Ground installation)

284

The Woody and Miniwoody series integrates a variety of sizes, optics, and accessories to design new perceptive settings, reduce consumption and increase accuracy and reliability. In addition to halogen and metal halide lamps, the range offers the innovative LED's light sources. Miniwoody is available with neutral and warm white colour temperature to valorise spaces with naturally warm emission while respecting the aesthetical values of green areas and architectural spaces, while Woody designs colourful perceptive sceneries with RGB LED's to illuminate trees, hedges, lawns in suggestive settings.

Woody - Miniwoody design Mario Cucinella

iGuzzini

Miniwoody page 294 (Above display application)

Miniwoody page 294 (Ground installation)

Woody and Miniwoody LED

Woody and Miniwoody discharge

Woody e Miniwoody electronic low voltage

Woody RGB

Light management systems

Miniwoody page 294 (Ground installation)

Refractor for elliptical distribution of the light flow

Wall-washer screen

285

Woody design Mario Cucinella

iGuzzini

Thanks to the excellent chromatic yield of its halogen lamp (QT12 and QT18), Woody is particularly ideal when lighting parks and gardens as well as residential areas. The light beam adjustment system helps with the lighting project’s light direction.

α

α

Spot Optic (S) QT12 α: adjustable from 4° to 10° QT18 α: 14°

Flood Optic (F) QT12 α: adjustable from 4° to 10° QT18 α: 43°

Light Sliver Optic (L) Spot +refractor

Light Sliver Optic (L) Spot +refractor

A light blade optic can be obtained adding a spot optic to the refractor to generate an elliptical distribution of the light beam. Quite useful when lighting vertical architectural elements.

The long life and high performance of the HIT lamp with flood optic allow to install Woody in architectural settings to illuminate façades and porticos.

α38°

Flood Optic (F)

The same light source with spot optic makes Woody especially suitable to exalt valuable architectural elements with accent light.

α16°

Spot Optic (S)

286

Miniwoody design Mario Cucinella

The new CDM Tm lamp is ideal for a fitting like Miniwoody. The fitting provides a great substitute for intrusive fittings of the past, for the lighting of building façades that are artistic and historic. Optimized energy consumption.

iGuzzini

α16°

α44°

Spot Optic (S)

The use of LEDs in the Miniwoody spotlight in recreational areas enhances the light scenery concept along with elevated energy consumption and less required maintenance

Flood Optic (F)

α10°

Spot Optic (S)

α18°

Medium Optic (M)

Cables are now electronic and no longer electromagnetic, and allow Miniwoody with halogen lamps to obtain the following advantages: longer lamp life and use of different power ranges. α

α

Flood Optic (F) α: adjustable from 24° to 56°

Spot Optic (S) α: adjustable from 6° to 24°

Light Sliver Optic (L) Spot + refractor

Elliptical Optic (E) Flood or Medium + refractor

Installation of an elliptical refractor combined with spot (hit, LED, and low voltage), medium (LED) and flood (hit and low voltage) optics allow lighting designers to have even more photometric distributions.

287

Woody

PROFESSIONAL FITTINGS WITH DYNAMIC COLOUR CHANGES FLOODLIGHTS IN-GROUND SPIKE LUMINAIRES WALL-MOUNTED LUMINAIRES

iGuzzini

S

A

ERG

Y

E

N

G

design Mario Cucinella

V I N

• Floodlights for use with halogen and discharge lamps, monochromatic and RGB LEDs • The fixture is installed in the ground, wall-mounted (with a fisher), pole-mounted, and branch-mounted. • Equipped with an optical assembly and base or a component box (discharge version). • Optical assembly, arms, base, frame, box, and caps made of aluminium alloy, with liquid acrylic paint that is highly resistant to UV rays and atmospheric agents. • Sodium-calcium tempered sealing glass, transparent and colourless, is 4 mm-thick, and secured with captive screws. • Silicone gaskets between the glass and outer frame. • Reflector made of 99,96 % ultrapure aluminium. • Vertical and horizontal orientation, with the possibility of blocking the aim. • Frame has slots for rainwater drainage. • All screws are A2 stainless steel. • The technical characteristics of the fitting comply with EN60598-1 standard. • IP66 IK07 • F seal • IMQ-ENEC approval • IMQ Performance • Class of Insulation II

Discharge version • Optical assembly tethered to the control gear box via a silicone multi-strand armoured steel protective cable • Power supply group with non-explosive power factor correction capacitor, ballast, starter. • PG11cable clamp in nickel-plated brass, ideal for cables with diameters between 6,5 and 11,5 mm. Halogen version • Electromagnetic transformer. • Rear screw regulates width of the light beam • PG11 cable clamp in nickel-plated brass, ideal for cables with diameters between 6,5 and 11,5 mm. Photo: Giuseppe Saluzzi

LED version • Monochromatic version with complete 12-LED circuit with Neutral White (4200K) and Warm White (3100K) colours.

• RGB version with complete 12-LED multicolour circuit and DALI 48÷56Vdc electronic control plate. • Double PG11 black polyamide cable clamp ideal for cables with diameters from 6.5 to 11mm (monochromatic version ready for pass-through wiring). • DALI RGB LED versions are provided with RGB DIRECT DIM for dimming with standard button with the following functions: Soft ON/OFF, colour change, last colour memory, default dynamic sequence. • Complete with terminal block for pass-through grounding cable (monochromatic LED version) • Monochromatic version with 100-240Vac 50/60Hz electronic power supply.

Sirolo (An) - Italy: Private villa

???

Direct dim (for RGB versions)

288

Low voltage version has light beam adjustment. Spot 4° - 10° Flood 14° - 50°

Woody LED design Mario Cucinella

15

lamp

optic

LED floodlight with base equipped with electronic power supply BA40 12x1 W neutral white BA41 12x1 W warm white BA42 12x1 W neutral white BA43 12x1 W warm white

,PD[ FG

S S F F

Neutral white = 4200K Warm white = 3100K

IP66 IK07

/X[ ƒ

ƒ

ƒ

[ : 1HXWUDO

ƒ /('

D

ƒ

,PD[ FG

Complete with lamp.

ƒ

[ : 1HXWUDO

ƒ /('

Floodlight with LED with dynamic colour changes RGB DALI BB24 24 W max 12 LED

D

ƒ

,PD[ FG .OP ƒ

F

IP66 IK07 : /(' 5*%

ƒ

Complete with lamp. On request available with LED red, green and amber.

Block diagram of Colour Quick system

/('

D

(P

100

(PD[

ø 100

K

G

(P

(PD[

K

G

(P

(PD[

Transmission index (K)

/X[ .OP

ƒ

ƒ

G

/X[ ƒ

ƒ

K

ø 85

code

205

04

PROFESSIONAL FITTINGS WITH DYNAMIC COLOUR CHANGES FLOODLIGHTS IN-GROUND SPIKE LUMINAIRES WALL-MOUNTED LUMINAIRES

iGuzzini

ƒ

Colour

K

White 6000K Cyan Orange Magenta Yellow Green Red Blue

1 0.38 1,01 0,81 1,15 0,95 0,95 0,15

Data refers to 6000K white light

Remote units

Main unit

Components

Colour Quick

Electronic power supply designed to mount on a DIN standard profile 220á240V 24Vdc

Luminaires

Woody LED RGB is also compatible with other light control systems of the iGuzzini range illustrated in this catalogue.

code 9730 available in colours 01 and 15

code 9908 max 64 (DALI loads) For the system definition, refer to the instructions.

Remote control code 9731 available in colour 01

Woody LED RGB (1 load/3 addresses DALI)

Electronic power supply 48á56Vdc designed to mount on a DIN standard profile code BZ14 100W code BZ15 240W code BZ16 480W

Parallel connection No. of products that can be connected / Cable cross section ballast code

BB24

lamp

section (mm2)

code BZ14 (100 W)

code BZ15 (240 W)

code BZ16 (480 W)

n.

L (m)

n.

L (m)

n.

L (m)

1,5

2

180

5

100

9

50

1

2

130

5

60

7

50

24 W max

Tension : 56 V Maximum length between the product and any box: 10 m

289

Woody LED design Mario Cucinella

PROFESSIONAL FITTINGS WITH DYNAMIC COLOUR CHANGES FLOODLIGHTS IN-GROUND SPIKE LUMINAIRES WALL-MOUNTED LUMINAIRES

iGuzzini

Compliance of LED products with standards is guaranteed only with the use of iGuzzini electronic components.

components code

power

dimensions

code

Electronic power supply designed to mount on a DIN standard profile BZ14 100 W 73x75x103h VIN=100-120/220-240Vac / 50-60 Hz VOUT= 48á56Vdc (SELV) for BB24 Available in colour 00

power

dimensions

Electronic power supply designed to mount on a DIN standard profile BZ16 480 W 82x124x127h VIN=100-240Vac¹15%/ 50-60 Hz VOUT= 48á56Vdc (SELV) for BB24 Available in colour 00

Electronic power supply designed to mount on a DIN standard profile BZ15 240 W 60x124x117h VIN=100-240Vac¹15%/ 50-60 Hz VOUT= 48á56Vdc (SELV) for BB24 Available in colour 00

accessories and installation systems code ,PD[ FG

Refractor for elliptical distribution of the light flow 1185

& /X[ ƒ

ƒ

ƒ

Available in colour 24 [ : 1HXWUDO

ƒ /('

D

ƒ ƒ

K

G

G (P (PD[

Light Sliver Optic (L)

BA40+1185 ,PD[ FG

& /X[ ƒ

ƒ

[ : 1HXWUDO

ƒ /('

D

ƒ ƒ

ƒ

K

G

G (P (PD[

Elliptical Optic (E)

BA42+1185

Wall-washer screen 1186

Support for attaching to pole Section = 40á80 mm 1190

Available in colours 04-15 Available in colours 04-15

Base for attaching to 90° angle 1189

Strap for attaching to branches Section = 40á120 mm 1187

Available in colours 04-15

Available in colour 00 For greater diameters it is possible to couple the belts together.

290

Base for attaching to 90° corner 1188

Stainless steel plate with spike for installation in gardens B989

Available in colours 04-15

Available in colour 00

Woody discharge design Mario Cucinella

FLOODLIGHTS WALL-MOUNTED LUMINAIRES

iGuzzini 03

15

lamp

Floodlight 7591 35 W 7593 70 W

optic ,PD[ FG .OP

HIT HIT

ƒ

ƒ

S S

/X[ .OP ƒ

IP66 IK07 :

ƒ +,7 &'0 7 * D ƒ

Floodlight 7592 35 W 7594 70 W

,PD[ FG .OP

HIT HIT

ƒ

ƒ

F F

G

(P

(PD[

K

G

(P

(PD[

165

/X[ .OP ƒ

IP66 IK07

K

ø 140

code

225

04

:

ƒ +,7 &'0 7 * D ƒ

ø 108

accessories and installation systems code ,PD[ FG .OP

Refractor for elliptical distribution of the light flow 1185 for 7591-7593

ƒ

ƒ

& /X[ .OP ƒ

Available in colour 24

:

ƒ +,7 &'0 7 * D ƒ ƒ

,PD[ FG .OP ƒ

ƒ

:

ƒ +,7 *

D

ƒ ƒ

K

G

G (P (PD[

& /X[ .OP ƒ

K

G

G (P (PD[

code

Wall-washer screen 1186

length *

Support for pole fastening 5929

100

On poles with diamete from 80 to 120 mm * Indicates the distance of the floodlight from the installation surface (pole or wall). Fastening plate for low wall application 5927

Support for wall fastening 5928

100

Support for double application on a pole 5930 2x100 On poles with diametre from 80 to 120 mm

291

Woody halogen design Mario Cucinella

FLOODLIGHTS WALL-MOUNTED LUMINAIRES

iGuzzini 03

15

optic ƒ

ƒ

/X[ .OP ƒ

S S :

IP66 IK07

ƒ 47 *<

D

ƒ

,PD[ FG .OP ƒ

ƒ

ƒ

Floodlight with incorporated base and transformer 7335 50 W 12 V QT 12 7337 75 W 12 V QT 12

D

ƒ

,PD[ FG .OP ƒ

ƒ

:

ƒ 47 *<

D

ƒ

,PD[ FG .OP ƒ

ƒ

ƒ

Floodlight with base 7338 100 W 7339 100 W

D

ƒ

,PD[ FG .OP

QT 18 QT 18

ƒ

ƒ

S F :

ƒ 47 % G

D

ƒ

,PD[ FG .OP ƒ

ƒ

ƒ

ƒ

Floodlight above display with incorporated transformer 7350 75 W 12 V QT 12

D

ƒ

ƒ

ƒ

ƒ

F :

ƒ 47 *<

D

ƒ

,PD[ FG .OP ƒ

ƒ

F

IP66 IK07 :

ƒ 47 % G

292

Minimum aperture of light cone

ø 100

K

G

(P

(PD[

K

G

(P

(PD[

K

G

(P

(PD[

K

G

(P

(PD[

Maximum aperture of light cone

Minimum aperture of light cone

Maximum aperture of light cone

K

G

G (P (PD[

,PD[ FG .OP & J ƒ /X[ .OP

IP66 IK07

Floodlight above display 7352 100 W QT 18

165

& /X[ .OP

: 47 % G

/X[ .OP ƒ

IP66 IK07

(PD[

/X[ .OP ƒ

: 47 *<

(P

/X[ .OP ƒ

F F

IP66 IK07

G

/X[ .OP ƒ

: 47 *<

K

ø 140

,PD[ FG .OP

230

lamp

Floodlight with incorporated base and transformer 7334 50 W 12 V QT 12 7336 75 W 12 V QT 12

D

ƒ

K

G

G (P (PD[

& /X[ .OP ƒ

K

G

G (P (PD[

165

code

125

04

ø 140 950

Woody halogen design Mario Cucinella

FLOODLIGHTS IN-GROUND SPIKE LUMINAIRES

iGuzzini 03

15

optic ,PD[ FG .OP ƒ

ƒ

S F S F

/X[ .OP ƒ

:

ƒ 47 *<

D

ƒ

K

G

(P

(PD[

K

G

(P

(PD[

K

G

(P

(PD[

165 ø 140

lamp

Floodlight with incorporated stake and transformer 7353 50 W 12 V QT 12 7354 50 W 12 V QT 12 7355 75 W 12 V QT 12 7356 75 W 12 V QT 12

Minimum aperture of light cone (Optic S)

IP66 IK07 ,PD[ FG .OP ƒ

ƒ

Completed with supply cable L = 3 m.

/X[ .OP ƒ

:

ƒ 47 *<

Floodlight with stake 7357 100 W 7358 100 W

D

ƒ

,PD[ FG .OP

QT 18 QT 18

ƒ

ƒ

S F :

ƒ

Completed with supply cable L = 3 m.

47 % G

D

ƒ

,PD[ FG .OP ƒ

ƒ

& /X[ .OP ƒ

:

ƒ 47 % G

D

Maximum aperture of light cone (Optic F)

/X[ .OP ƒ

IP66 IK07

340

code

270

04

ƒ

K

G

G (P (PD[

accessories and installation systems code ,PD[ FG .OP

Refractor for elliptical distribution of the light flow 1185

ƒ

ƒ

& /X[ .OP ƒ

Available in colour 24 :

ƒ 47 *<

D

ƒ ƒ

K

G

G (P (PD[

7334+1185 - 7353+1185 ,PD[ FG .OP ƒ

ƒ

:

ƒ 47 % G

D

ƒ ƒ

& /X[ .OP ƒ

K

G

G (P (PD[

7338+1185 - 7357+1185

Wall-washer screen 1186

Support for attaching to pole Section = 40á80 mm 1190 for 7334-7335-7336-7337-7338-7339

Base for attaching to 90° angle 1189 for 7334-7335-7336-7337-7338-7339

Strap for attaching to branches Section = 40á120 mm 1187 for 7334-7335-7336-7337-7338-7339 Available in colour 00

Base for attaching to 90° corner 1188 for 7334-7335-7336-7337-7338-7339

For greater diameters it is possible to couple the belts together.

293

Miniwoody

S

A

Discharge version

ERG

Y

E

N

LED version

FLOODLIGHTS IN-GROUND SPIKE LUMINAIRES WALL-MOUNTED LUMINAIRES

iGuzzini

G

design Mario Cucinella

V I N

• Floodlight for use with halogen, discharge lamps and LEDs. • The fixture is installed into the ground, wall-mounted (with a fisher) and on branches. • The fixture ha san optical assembly and base. • Optical assembly, arms, base, frame, box, and caps made of aluminium alloy, with liquid acrylic paint that is highly resistant to UV rays and atmospheric agents. • Sodium-calcium tempered sealing glass, transparent and colourless, is 4 mm-thick, and secured with captive screws. • Vertical and horizontal orientation, with the possibility of blocking the aim. • Frame has slots for rainwater drainage. • Available accessories: refractor, wall-washer screens, spikes for ground installation, and various installation accessories • All screws are A2 stainless steel. • The technical characteristics of the fitting comply with EN60598-1 standard. • IP66 IK08 • F seal • IMQ-ENEC approval • IMQ Performance • Class of Insulation I/II LED version • Personalised grey silk screen on the glass. • Optics with plastic lens (spot and medium); spill-ring for visual comfort. • plate for LED support made of anodized black aluminium. • Circuit equipped with three 6700 K white, “Warm White” 3250 K or blue LEDs (other colours available upon request). • Electronic power supply: 3W, 220÷240V 50÷60Hz.

Spill-ring for LED version

Low voltage electronic version

294

Adjustmen of beamspread Flood 15° - 50° Spot 5° - 15°

• Double PG11 cable clamp for pass-through cable, made of black polyamide. Ideal for cables with diameters between 6,5 and 11,5 mm. • Equipped with clamp for pass-through grounding cable. • Filters for white LEDs available (cyan, magenta, yellow, and orange). • Class of Insulation II Discharge version • Optical assembly connected to the control gear compartment via silicone fibre cables with fibres made of protection steel. • M14x1 nickel-plated brass cable gland for connection between the cable compartment and the lamp compartment. • 99.96% ultra pure aluminium sheet reflector. • PGJ5 lamp holder with cables • lamp-holder support made of galvanized steel. • PG11 cable clamp made of black polyamide. Ideal for cables with diameters between 6,5 and 11,5 mm. • Electronic power supply: 20W, 220÷240V 50÷60Hz. • Class of Insulation I Low voltage electronic version • Reflector made of 99,96% ultrapure aluminium steel sheet. • GY6.35 lamp holder with cables. • Lamp-holder support made of die-cast aluminium • Device that regulates light beam width located in the rear. • PG11 cable clamp made of black polyamide. Ideal for cables with diameters between 6,5 and 11,5 mm. • Electronic transformer: 50W, 220÷240V 50÷60Hz, dimmable with IGBT technology. • Class of Insulation II

Cascade connection and double PG versione LED

Powers 35 - 50 W Low voltage version

Electronic control gear Low voltage version

Electronic control gear Discharge version

Miniwoody LED design Mario Cucinella

15

lamp

optic

LED floodlight with base equipped with electronic power supply BB22 3x1 W neutral white B590 3x1 W warm white B587 3x1 W blu BB23 3x1 W neutral white B591 3x1 W warm white B589 3x1 W blu

,PD[ FG

S S S M M M

/X[ ƒ

ƒ

(P

(PD[

ƒ /('

Neutral white = 4200K Warm white = 3100K

Complete with lamp. On request available with LED cool white (6700K), red, green and amber.

G

[ : 1HXWUDO D

ƒ

,PD[ FG

IP66 IK08

K

ƒ

ƒ

[ : 1HXWUDO

ƒ /('

D

ø 100

/X[ ƒ

ƒ

100 ø 85

code

205

04

FLOODLIGHTS IN-GROUND SPIKE LUMINAIRES WALL-MOUNTED LUMINAIRES

iGuzzini

ƒ

K

G

(P

(PD[

Transmission coefficient LED blue 0,3

accessories and installation systems code ,PD[ FG

Refractor for elliptical distribution of the light flow 1181

& /X[ ƒ

ƒ

ƒ

Available in colour 24 [ : 1HXWUDO

ƒ /('

D

ƒ ƒ

K

G

G (P (PD[

Light Sliver Optic (L)

BB22+1181 ,PD[ FG

& /X[ ƒ

ƒ

[ : 1HXWUDO

ƒ /('

D

ƒ ƒ

ƒ

K

G

G (P (PD[

Elliptical Optic (E)

BB23+1181

Coloured filters B990 for BB22-BB23-B590-B591

Wall-washer screen 1182 Available in colours 04-15

Available in colours 02-06-26-D7

Base for attaching to 90° angle 1189

Support for attaching to pole Section = 40á80 mm 1190

Available in colours 04-15

Available in colours 04-15

Base for attaching to 90° corner 1188

Stainless steel plate with spike for installation in gardens B989

Available in colours 04-15

Available in colour 00

Strap for attaching to branches Section = 40á120 mm 1187 Available in colour 00 For greater diameters it is possible to couple the belts together.

295

Miniwoody discharge design Mario Cucinella

FLOODLIGHTS IN-GROUND SPIKE LUMINAIRES WALL-MOUNTED LUMINAIRES

iGuzzini 03

15

optic ƒ

ƒ

/X[ .OP ƒ

IP66 IK08

:

ƒ &'0 WP 3*-

D

ƒ

,PD[ FG .OP ƒ

:

ƒ &'0 WP 3*-

D

ƒ

,PD[ FG .OP

Floodlight with built-in electronic ballast for application above shop windows B592 20 W HIT (CDM-Tm) F

ƒ

IP66 IK08 :

ƒ &'0 WP 3*-

D

(P

100

(PD[

125

K

G

(P

(PD[

/X[ .OP ƒ

ƒ

G

/X[ .OP ƒ

ƒ

K

ø 85

,PD[ FG .OP

ƒ

K

G

(P

(PD[

ø 85 875

accessories and installation systems code ,PD[ FG .OP

Refractor for elliptical distribution of the light flow 1181

ƒ

ƒ

Available in colour 24 :

ƒ &'0 WP 3*-

Wall-washer screen 1182 Available in colour 04-15

D

ƒ ƒ

& /X[ .OP ƒ

K

G

G (P (PD[

Strap for attaching to branches Section = 40á120 mm 1183 for B582-B583 Available in colour 00 For greater diameters it is possible to couple the belts together.

Stainless steel plate with spike for installation in gardens B988 for B582-B583 Available in colour 00 Stainless-steel plate with anchoring bolts for application to the ground 1184 for B582-B583 Available in colour 00

296

205

lamp

Floodlight with base equipped with electronic power supply B582 20 W HIT (CDM-Tm) S B583 20 W HIT (CDM-Tm) F

100

code

125

04

Branch box for multiple connection B915 1m

IP68

Available in colour 04

Miniwoody electronic low voltage design Mario Cucinella

FLOODLIGHTS IN-GROUND SPIKE LUMINAIRES WALL-MOUNTED LUMINAIRES

iGuzzini 03

15

optic ƒ

ƒ

/X[ .OP ƒ

S

IP66 IK08 :

ƒ 47 *<

D

ƒ

,PD[ FG .OP ƒ

ƒ

ƒ

Floodlight with built-in electronic transformer and base B585 35/50 W 12 V QT 12

D

ƒ

,PD[ FG .OP ƒ

ƒ

:

ƒ 47 *<

D

ƒ

,PD[ FG .OP ƒ

:

ƒ 47 *<

D

ƒ

,PD[ FG .OP

Floodlight with built-in electronic transformer for application above shop windows B593 35/50 W 12 V QT 12 F

IP66 IK08 :

ƒ 47 *<

D

ƒ

100

Minimum aperture of light cone

125

K

G

(P

(PD[

Maximum aperture of light cone

K

G

(P

(PD[

Minimum aperture of light cone

K

G

(P

(PD[

Maximum aperture of light cone

/X[ .OP ƒ

ƒ

(PD[

/X[ .OP ƒ

ƒ

(P

/X[ .OP ƒ

F

IP66 IK08

G

/X[ .OP ƒ

: 47 *<

K

ø 85

,PD[ FG .OP

205

lamp

Floodlight with built-in electronic transformer and base B584 35/50 W 12 V QT 12

ƒ

K

G

(P

(PD[

100

code

125

04

ø 85 875

accessories and installation systems code

code

Refractor for elliptical distribution of the light flow 1181

Stainless steel plate with spike for installation in gardens B988 for B584-B585

Available in colour 24 Available in colour 00 Wall-washer screen 1182 Available in colours 04-15

Strap for attaching to branches Section = 40á120 mm 1183 for B584-B585 Available in colour 00 For greater diameters it is possible to couple the belts together.

Stainless-steel plate with anchoring bolts for application to the ground 1184 for B584-B585 Available in colour 00

Branch box for multiple connection B915 1m

IP68

Available in colour 04

297

RGB

298

Wall-mounting

Horizontal pendant

Double horizontal pendant

iSign design J.M. Duthilleul

iGuzzini

The product has been awarded the following prize: - iF Design Award 2008

Diameter 110 mm

Diameter 80 mm

Vertical pendant

Double vertical pendant

A polycarbonate exterior and an original and technological design makes these fluorescent T16 fittings stand out. IP67 certifies the elevated resistance to dust and water penetration, making the fittings ideal instruments for work spaces, industrial areas, stations and undergrounds, pedestrian areas, wellness and relaxation areas, parking areas or other spaces that have both interior as well as exterior components. Lighting is homogeneous and direct glare is reduced thanks to the stripes on the entire body of the fitting. Available in two diameters, 80 and 110 mm, in two lengths.

There is a single lamp or a two-lamp version as well as an RGB version with DALI control gear. The RGB versions can be controlled by the ‘Colour Equalizer’ system. These products are preconfigured for Plug&Play. A smart card is available upon request and can launch several customized programmes. Can be installed as wall-mountings or ceiling-mountings, and as horizontal or vertical pendants with single or double modules. An internal plate supports the lamps, and there are interior pass-through cables and quick connecting terminal boxes. No tools are required for installation of the end caps, which decreases installation and maintenance operations.

299

iSign design J.M. Duthilleul

PENDANT LUMINAIRES PROFESSIONAL FITTINGS WITH DYNAMIC COLOUR CHANGES CEILING MOUNTED FITTINGS

iGuzzini

M24 cable clamp with a small rubber clamp (for cables with max section of 15,5mm2)

Striped transparent polycarbonate end cap

Polycarbonate lamp cover

Quick-connecting terminal boxes Extractable group (composed of steel plate, lamps, and ballast)

Stainless steel fastening clip for end cap

Die-cast aluminium collar

• Fittings for use with T16 lamps • Polycarbonate with anti-UV exterior body and end caps; interior structure made of aluminium and steel sheet. • Body and end caps made of transparent striped polycarbonate with limited glare. •Double M24 cable clamp uses Dmax=15,5mm2 electric cables. • Versions ready for pass-through cables, complete with cables and quick-connecting terminals • End caps can bee unhooked via stainless steel clips; ordinary maintenance operations require no tools. Extractable plate for lamp changes. • Electric terminal boxes for quick connection to interrupt electrical connection in case an end cap is open. • Electronic fluorescent cables, electronic with emergency light and RGB.

• Emergency versions complete with inverter and batteries; emergency lighting permanent duration of 1 hour with terminals ready for REST MODE. • RGB versions have dimmable DALI ballasts. Plug&play connection to colour equalizer control system. • RGB versions complete with lamps (1xRED, 1xGREEN, 1xBLUE). • Pendants have precision adjustment system. • The technical characteristics of the fitting comply with EN60598-1 standard. • IP67 IK08 • F seal • IMQ-ENEC approval • Class of Insulation I/II

Versions CLASS I/CLASS II

Version with emergency lamp

Silicone gaskets

Pass-through cables Striped transparent polycarbonate tube

Aluminium interior structure

Easy installation and maintenance

300

Adjustability 360°

M24 cable clamp

Complete protection against dust and waves - IP 67

Pass-through cables

RGB Management. Plug and Play

iSign design J.M. Duthilleul

PENDANT LUMINAIRES CEILING MOUNTED FITTINGS

iGuzzini 03

24

code

lamp

Luminaire ø 80 mm with electronic control gear 6743 28 W T 16 6744 35 W T 16 6745 54 W T 16 6746 80 W T 16

length ,PD[ FG .OP

& J ƒ &,( ƒ

1460 1760 1460 1760

ƒ

:

87( + 7 ) ) ) ) ) ) &,%6( %=

7 *

Q/ 8*5 ',1

ƒ %

ƒ

IP67 IK08

ƒ

:

ƒ & J ƒ &,( ƒ ƒ

87( + 7 ) ) ) ) ) ) &,%6( %=

& J ƒ &,( ƒ

ƒ

87( + 7 ) ) ) ) ) ) &,%6( %=

ƒ ,PD[ FG .OP

& J ƒ &,( ƒ

ƒ

87( + 7 ) ) ) ) ) ) &,%6( %=

ƒ ,PD[ FG .OP

& J ƒ &,( ƒ

ƒ

7 *

& J ƒ &,( ƒ

ƒ

[ :

Q/ 8*5 ',1 ƒ % 87( + 7 ) ) ) ) ) ) &,%6( %=

ƒ ,PD[ FG .OP

7 *

Q/ 8*5 ',1

ƒ %

7 *

[ :

Q/ 8*5 ',1

ƒ %

7 *

:

80

ƒ ,PD[ FG .OP

:

Q/ 8*5 ',1

ƒ %

7 *

Luminaire ø 110 mm with electronic control gear for permanent emergency lighting 6747 2x35 W T16 1760 IP67 IK08

87( + 7 ) ) ) ) ) ) &,%6( %=

,PD[ FG .OP

:

Q/ 8*5 ',1

ƒ %

7 *

IP67 IK08

Dimmable DALI versions available upon request

& J ƒ &,( ƒ

L

,PD[ FG .OP

Luminaire ø 80 mm with electronic control gear complete with pass-through cables 6736 28 W T 16 1460 6737 35 W T 16 1760 6738 39 W T 16 1160 6739 54 W T 16 1460 6740 80 W T 16 1760 6741 2x28 W T 16 1460 6742 2x35 W T 16 1760

Q/ 8*5 ',1 ƒ % 87( + 7 ) ) ) ) ) ) &,%6( %=

ƒ

301

iSign design J.M. Duthilleul

PENDANT LUMINAIRES PROFESSIONAL FITTINGS WITH DYNAMIC COLOUR CHANGES CEILING MOUNTED FITTINGS

iGuzzini 03

24

lamp

Luminaire ø 110 mm with electronic control gear 6751 2x28 W T 16 6752 2x49 W T 16 6753 2x54 W T 16

length ,PD[ FG .OP

& J ƒ &,(

Q/ 8*5

ƒ ƒ

1575 1875 1575 [ :

IP67 IK08

ƒ ',1

% 87( + 7 ) ) ) ) ) ) &,%6( %= %=

7 *

Luminaire ø 110 mm with electronic control gear complete with pass-through cables 6748 2x28 W T 16 1575 6749 2x49 W T 16 1875 6750 2x54 W T 16 1575

ƒ ,PD[ FG .OP

& J ƒ &,(

Q/ 8*5

ƒ ƒ

[ :

L

code

ƒ ',1

% 87( + 7 ) ) ) ) ) ) &,%6( %= %=

7 *

ƒ

IP67 IK08 ,PD[ FG .OP

Dimmable DALI versions available upon request Luminaire ø 110 mm with electronic control gear for permanent emergency lighting 6754 2x28 W T 16 1575

& J ƒ &,(

Q/ 8*5

ƒ ƒ

[ :

ƒ ',1

% 87( + 7 ) ) ) ) ) ) &,%6( %= %=

7 *

110

ƒ

IP67 IK08

,PD[ FG .OP

Luminaire ø 110 mm with RGB dynamic colour change 6755 3x28 W T 16 1575 6756 3x35 W T 16 1875 [ :

Complete with: 1 Red tube 1 Green tube 1 Blue tube

7 *

Q/

ƒ 8*5

',1 % 87( * 7 ) ) ) ) ) ) &,%6( %=

ƒ

L

IP67 IK08

& &,( ƒ

ƒ

Occupies 3 DALI addresses Complete with lamp and pass-through cables

110

Block diagram of system Colour Quick

Components

Main unit and Remote units

Electronic power supply designed to mount on a DIN standard profile 220á240V 24Vdc

Colour Quick

Luminaires

iSign RGB is also compatible with other light control systems of the iGuzzini range illustrated in this catalogue.

code 9908

code 9730 main unit Available in colours 01 and 15

max 64 (DALI loads) iSign RGB (3 loads/ DALI addresses) max 21

Remote control For the system definition, refer to the instructions

302

code 9731 remote units Available in colours 01

iSign design J.M. Duthilleul

iGuzzini

PENDANT LUMINAIRES PROFESSIONAL FITTINGS WITH DYNAMIC COLOUR CHANGES CEILING MOUNTED FITTINGS

installation systems code

code

Two plastic brackets for ceiling/wall installation 9400 for 6736-6737-6738-6739-6740-6741 6742-6743-6744-6745-6746-6747 9412 for 6748-6749-6750-6751-6752-6753 6754-6755-6754

5-pole power base with cables for double horizontal suspension 9408 for 6736-6737-6738-6739-6740-6741 6742-6743-6744-6745-6746-6747 9422 for 6748-6749-6750-6751-6752-6753 6754-6755-6754

Available in colour 15

Available in colour 15

Two aluminium brackets for ceiling/wall installation 9499 for 6736-6737-6738-6739-6740-6741 6742-6743-6744-6745-6746-6747 9619 for 6748-6749-6750-6751-6752-6753 6754-6755-6754

Cable for double horizontal suspension 9409 for 6736-6737-6738-6739-6740-6741 6742-6743-6744-6745-6746-6747 9423 for 6748-6749-6750-6751-6752-6753 6754-6755-6754

Available in colour 15

Available in colour 00

5-pole power base with cables for single horizontal suspension 9402 for 6736-6737-6738-6739-6740-6741 6742-6743-6744-6745-6746-6747 9413 for 6748-6749-6750-6751-6752-6753 6754-6755-6754

5-pole power base with cables for single vertical suspension 9410 for 6736-6737-6738-6739-6740-6741 6742-6743-6744-6745-6746-6747 9431 for 6748-6749-6750-6751-6752-6753 6754-6755-6754

Available in colour 15

Available in colour 15

Cable for single horizontal suspension 9403 for 6736-6737-6738-6739-6740-6741 6742-6743-6744-6745-6746-6747 9421 for 6748-6749-6750-6751-6752-6753 6754-6755-6754

5-pole power base with cables for double vertical suspension 9411 for 6736-6737-6738-6739-6740-6741 6742-6743-6744-6745-6746-6747 9432 for 6748-6749-6750-6751-6752-6753 6754-6755-6754

Available in colour 00

Available in colour 15 5-pole power base 9401 Available in colour 15

303

Xenon wall-mounted/pendant

FL wall-mounted/pendant

DALI monochromatic LED wall-mounted/pendant

DALI RGB LED wall-mounted/pendant

LED version

304

RGB version

Linealuce design Jean Michel Wilmotte

iGuzzini

Xenon recessed

FL recessed

DALI monochromatic LED recessed

LED RGB DALI recessed

Light management systems

DALI light management

The “art� of light and scene design finds a new effective tool in Jean Michel Wilmotte's product, which can be integrated in settings with minimal visual impact thanks to the very compact dimensions. The dimming features and the new light sources dimmable LED, dimmable fluorescent and RGB LED - available both for wall-mounted/suspended and recessed versions, widen the

flexibility and versatility of Linealuce, while the new warm and natural white colour temperatures embrace the space with a warm pleasant emission. Linealuce finds its optimal application in exteriors of buildings and in interiors of high-vaulted churches and buildings, guarantees maximum energy saving and gives life to suggestive scenes taking advantage of the DALI protocol.

305

Linealuce wall-mounted/pendant design Jean Michel Wilmotte

luminaire

code

iGuzzini

optic

BB65

lamp

length

luminaire

code BB81

7x1 W LED neutral white

lamp

376

length

27 Wmax 21 LED neutral white SPOT

SPOT

B745

optic

BB82

942 27 Wmax 21 LED warm white

SPOT

7x1 W LED warm white

14x1 W LED neutral white SPOT

638 B747

14x1 W LED warm white SPOT

BB67

BB83

39 Wmax 30 LED neutral white SPOT

75

BB84

1303 39 Wmax 30 LED warm white

SPOT 76

BB66

LED monochromatic DALI

SPOT

BB87

27 Wmax 21 LED neutral white FLOOD

BB88

942 27 Wmax 21 LED warm white

FLOOD

21x1 W LED neutral white SPOT

BB89

942 B749

39 Wmax 30 LED neutral white FLOOD

21x1 W LED warm white

BB90

SPOT

1303 39 Wmax 30 LED warm white

FLOOD

BA76

B751

75

28x1 W LED warm white SPOT

688

BA77

27 Wmax 21 LED RGB

942

39 Wmax 30 LED RGB

1303

FLOOD

BA78

76

LED monochromatic

1238

21 Wmax 15 LED RGB FLOOD

75

76

28x1 W LED neutral white SPOT

LED RGB DALI

BB68

FLOOD

BB69

7x1 W LED neutral white

7862

FLOOD

75

B746

7863

7x1 W LED warm white

21 W T 16

942

28 W T 16

1238

35 W T 16

1538

21 W T 16

942

28 W T 16

1238

35 W T 16

1538

6x8,5 W XENON

539

10x8,5 W XENON

859

16x8,5 W XENON

1339

76

7864 BB70

688

FLOOD

FL

FLOOD

14 W T 16 FLOOD

376

FLOOD

14x1 W LED neutral white FLOOD

638

7865 FLOOD

B748

14x1 W LED warm white FLOOD

B857 FLOOD

21x1 W LED neutral white FLOOD

76

BB71

FL DALI

75

B858 FLOOD

942 B859 B750

21x1 W LED warm white

FLOOD

FLOOD

7867 28x1 W LED neutral white FLOOD

1238 B752

28x1 W LED warm white FLOOD

57

BB72

XENON

FLOOD

7869 FLOOD

75 116

7872 FLOOD

306

Linealuce recessed design Jean J.M. Wilmotte Michel Wilmotte

code

optic

BB73 5902*

lamp

length

luminaire

code semi-acid finished glass

luminaire

iGuzzini

14x1 W LED neutral white SPOT

668 BA53

5903*

SPOT

972 BA56 5903*

5904*

BZ12*

BA71 5903*

21x1 W LED warm white

28x1 W LED neutral white

BZ12*

1268 5904*

5901*

28x1 W LED warm white SPOT

5902*

117

BB76 5902*

14x1 W LED neutral white FLOOD

BA62

14x1 W LED warm white

5903*

21x1 W LED neutral white

5904* 117

BB77

101

FLOOD

972 BA65 5903*

5902*

FLOOD

5904*

BA68

5903*

SPOT

5904*

SPOT

101

SPOT

5905*

5903*

27 Wmax 21 LED neutral white

28 W T 16

1268

35 W T 16

1568

14 W T 16

668

21 W T 16

972

28 W T 16

1268

35 W T 16

1568

21 W T 16

972

28 W T 16

1268

35 W T 16

1568

21 W T 16

972

28 W T 16

1268

35 W T 16

1568

6x8,5 W XENON

610

10x8,5 W XENON

930

16x8,5 W XENON

1410

FLOOD

5905*

101

BC03

1334 39 Wmax 30 LED warm white

FLOOD

* Casing code

5907* 135

39 Wmax 30 LED neutral white FLOOD

FLOOD

7884

27 Wmax 21 LED warm white FLOOD

BC02

FLOOD

B867 972

XENON

anti-skid glass

972

W.W.

B866

FLOOD

BC01

BZ13*

21 W T 16

39 Wmax 30 LED warm white SPOT

BB99

BZ13*

668

W.W.

B865

5904*

5903*

14 W T 16

W.W.

B863 117

39 Wmax 30 LED neutral white

1334

5903*

414

FLOOD

B862

27 Wmax 21 LED warm white

BB96 BZ13*

8 W T 16

FLOOD

B861

FL DALI

semi-acid finished glass

5905*

27 Wmax 21 LED neutral white

BB95 BZ13*

1334

FLOOD

7893

972

117

LED monochromatic DALI

101

5904*

28x1 W LED warm white

BB94 5903*

39 Wmax 30 LED RGB

FLOOD

7892

FLOOD

BB93 5903*

972

28x1 W LED neutral white FLOOD

1268 5904*

27 Wmax 21 LED RGB

W.W.

7891 5903*

BB78

719

W.W.

7890

21x1 W LED warm white

21 Wmax 15 LED RGB

W.W.

7882 5905*

1334

W.W.

7881

FLOOD

FL

anti-skid glass

5902*

5903*

39 Wmax 30 LED RGB

W.W.

7880

668

972

FLOOD

7879

101

27 Wmax 21 LED RGB

FLOOD

7878

BA59

719

FLOOD

BA75 BZ13*

SPOT

21 Wmax 15 LED RGB

W.W.

BA74 5903*

length

W.W.

BA72 BZ13*

lamp

W.W.

BA73

SPOT

BB75 LED monochromatic

21x1 W LED neutral white

anti-skid glass

BB74

101

BA70

117

SPOT

LED RGB DALI

semi-acid finished glass

5902*

14x1 W LED warm white

optic

W.W.

7886 5909*

W.W.

7889 5912*

W.W.

* Casing code

307

Linealuce design Jean J.M. Wilmotte Michel Wilmotte

Linealuce LED with spot optic allows users to light windowsills, particularly those that are not easy to access and those that longer maintenance cycle times.

LED 7x1W (BB65) d (m) 5 4 3 2 1

iGuzzini

Spot Optic (S) LED version

Spot Optic (S) LED version

lux 5 10 20 45 105

Linealuce fluorescent fixtures with symmetric optics and Linealuce LEDs with flood optics, when installed as pendants with rods / or ceilingmountings, guarantee good lighting levels, lower maintenance costs and higher energy savings for public shelters, pedestrian underground passageways etc.

Flood Optic (F) Fluorescent version

Linealuce recessed fluorescent fixtures with asymmetric optics offer high lighting levels and uniform lighting because of the particular nature of the printed glass. The LED ceiling-mounted version with spot optics generate excellent wall lighting along with contained lighting levels.

Wall Washer Optic (WW) Fluorescent version

LED 28x1W (BB68) d (m) 8 7 6 5 4 3 2 1

lux 3 4 7 10 15 30 55 130

d= Distance from lighting fixture

308

Flood Optic (F) LED version

Spot Optic (S) LED version (Recommended distance from walls: 10-15 cm)

Linealuce wall-mounted/pendant J.M. Wilmotte design Jean Michel Wilmotte

PENDANT LUMINAIRES WALL-WASHER LUMINAIRES CEILING MOUNTED FITTINGS

iGuzzini ERG

Y

E

N

G

S

A

V I N

LED version page 310

FL version page 314 Xenon version page 313

Installed as a wall mounted fixture

Installed as a ceiling-mount fixture

Installed as a pendant

Direct dim (for RGB and DALI monochromatic versions)

Verona - Italy: Roman Theatre

Photo: Giuseppe Saluzzi

• Direct lighting luminaire, for use with fluorescent lamps, White XENON, Monochromatic and RGB LEDs. • Ceiling-mounted, wall-mounted, or installed as pendants. • Linealuce has a body and support elements (ordered separately). • Extruded aluminium structure, with die-cast aluminium end caps with silicone trim. • Optical compartment closed on top by a transparent glass screen fastened with silicone for the fluorescent version and monochromatic LED. • Optical compartment closed on top by a semi-acid-finished glass screen fastened with silicone for RGB LED Version and DALI dimmable monochromatic LED. • Fluorescent versions with ultrapure reflector. • Monochromatic LED versions complete with multi-LED power plate in Neutral White 4200K and warm white 3100K (other colours and cool white 6700K upon request); optics with lens made of plastic spot (S) and flood (F). Available dimmable version with DALI 48-56Vdc digital electronic control board. • RGB LED version with red, green and blue LED circuit, DALI 48÷56Vdc control card, and optics with plastic lenses (flood).

Switch dim (for FL DALI versions)

Temperature < 40° C for LED version

Low maintenance (long life of LED) for LED version

• DALI RGB LED versions are provided with RGB DIRECT DIM for dimming with standard button with the following functions: Soft ON/OFF, colour change, last colour memory, default dynamic sequence. • DALI monochromatic LED versions are provided with DIRECT DIM for dimming with standard button with the following functions: Soft ON/OFF, dimming, last intensity level memory. • DALI FL LED versions are provided with SWITCH DIM for dimming with standard button with the following functions: Soft ON/OFF, dimming, last intensity level memory. • Electronic power supply group contained inside the fitting (dimmable fluorescent and monochromatic LED version)); 48÷56Vdc power supply to be ordered separately for RGB LED version and DALI dimmable monochromatic LED. • Single cable entrance via PG11 nickel-plated brass cable clamps for ø 6.5÷11mm cables. • All external screws are A2 stainless steel. • The technical characteristics of the fitting comply with EN60598-1 standard. • IP66 IK05 • F seal • IMQ-ENEC approval (FL versions only) • Class of Insulation I/II

Double PG and pass-through cable for FL and Xenon versions

309

Linealuce wall-mounted/pendant LED J.M. Wilmotte design Jean Michel Wilmotte

PENDANT LUMINAIRES WALL-WASHER LUMINAIRES CEILING MOUNTED FITTINGS PROFESSIONAL FITTINGS WITH DYNAMIC COLOUR CHANGES

iGuzzini

15

lamp

length

Monochromatic LED module with power supply - spot optic BB65 7x1 W neutral white 376 B745 7x1 W warm white 376 BB66 14x1 W neutral white 638 B747 14x1 W warm white 638 BB67 21x1 W neutral white 942 B749 21x1 W warm white 942 BB68 28x1 W neutral white 1238 B751 28x1 W warm white 1238 IP66 IK05

,PD[ FG

/X[ ƒ

[ : 1HXWUDO /('

ƒ

ƒ

D

ƒ

ƒ

,PD[ FG

[ : 1HXWUDO /('

ƒ ƒ

ƒ

,PD[ FG

IP66 IK05

[ : 1HXWUDO /('

ƒ ƒ

ƒ

,PD[ FG

Neutral white = 4200K Warm white = 3100K

/('

ƒ

ƒ

D

ƒ

ƒ

,PD[ FG

/('

Monochromatic LED module with power supply - flood optic BB69 7x1 W neutral white 376 B746 7x1 W warm white 376 BB70 14x1 W neutral white 638 B748 14x1 W warm white 638 BB71 21x1 W neutral white 942 B750 21x1 W warm white 942 BB72 28x1 W neutral white 1238 B752 28x1 W warm white 1238 IP66 IK05

ƒ

D

ƒ

ƒ

,PD[ FG

/('

ƒ

ƒ

D

ƒ ƒ

,PD[ FG

Neutral white = 4200K Warm white = 3100K

Complete with lamp. On request available with LED cool white (6700K), blue, red, green and amber.

/('

ƒ

ƒ

D

ƒ

ƒ

,PD[ FG

[ : 1HXWUDO /('

ƒ

ƒ

D

ƒ

ƒ

,PD[ FG

IP66 IK05

*L=688mm 21Wmax 15 LED version available upon request

Power supply to be ordered separately. Occupies 1 DALI address

[ : 1HXWUDO /('

ƒ

ƒ

D

ƒ

ƒ

,PD[ FG

Installation systems are illustrated on page 315 310

/('

ƒ

ƒ

D

ƒ

G

(P

(PD[

G

(P

(PD[

G

(P

(PD[

G

(P

(PD[

(PD[

K

G

(P

K

G

(P

(PD[

K

G

(P

(PD[

K

G

(P

(PD[

/X[ ƒ

: /(' 1HXWUDO

/X[ ƒ

Neutral white = 4200K Warm white = 3100K

/X[ ƒ

Monochromatic LED module dimmable DALI - flood optic BB87* 27Wmax 21 neutral white 942 BB88* 27Wmax 21 warm white 942 BB89 39Wmax 30 neutral white 1303 BB90 39Wmax 30 warm white 1303

/X[ ƒ

[ : 1HXWUDO

/X[ .OP ƒ

[ : 1HXWUDO

K

ƒ

/X[ ƒ

: /(' 1HXWUDO

K

version available upon request [ : 1HXWUDO

/X[ ƒ

*L=688mm 21Wmax 15 LED Power supply to be ordered separately. Occupies 1 DALI address

K

ƒ

D

(PD[

/X[ ƒ

Monochromatic LED module dimmable DALI - spot optic BB81* 27Wmax 21 neutral white 942 BB82* 27Wmax 21 warm white 942 BB83 39Wmax 30 neutral white 1303 BB84 39Wmax 30 warm white 1303

(P

K

ƒ

D

G

/X[ ƒ

Neutral white = 4200K Warm white = 3100K

Complete with lamp. On request available with LED cool white (6700K), blue, red, green and amber.

K

ƒ

K

G

(P

(PD[

76

code

75

Linealuce wall-mounted/pendant LED J.M. Wilmotte design Jean Michel Wilmotte

PENDANT LUMINAIRES WALL-WASHER LUMINAIRES CEILING MOUNTED FITTINGS PROFESSIONAL FITTINGS WITH DYNAMIC COLOUR CHANGES

iGuzzini

15

lamp

length ,PD[ FG

LED module with RGB dynamic colour change - flood optic BA76 21Wmax 15 LED 48á56Vdc 688 BA77 27Wmax 21 LED 48á56Vdc 942 BA78 39Wmax 30 LED 48á56Vdc 1303

ƒ

: /(' 5*%

IP66 IK05

& J ƒ /X[ ƒ

ƒ

/('

D

Complete with lamp and electronic DALI control card. Power supply to be ordered separately. Occupies 3 DALI addresses

ƒ ƒ ƒ

,PD[ FG

ƒ

ƒ

/('

D

ƒ

ƒ ƒ

,PD[ FG

Installation systems are illustrated on page 315

ƒ

ƒ

/('

D

G (P (PD[

75

K

G

G (P (PD[

Transmission coefficient (K)

& J ƒ /X[ ƒ

: /(' 5*%

G

& J ƒ /X[ ƒ

: /(' 5*%

K

76

code

ƒ

ƒ ƒ

K

G

G (P (PD[

Colour

K

White 6000K Cyan Orange Magenta Yellow Green Red Blue

1 0,44 0,57 0,45 0,90 0,70 0,34 0,23

Data refers to 6000K white light

Block diagram of Colour Quick system for Linealuce LED RGB wall-mounted/pendant

Remote units

Main unit

Components

Colour Quick

Electronic power supply designed to mount on a DIN standard profile 220á240V 24Vdc

Luminaires

Linealuce is also compatible with other light control systems of the iGuzzini range illustrated in this catalogue.

code 9730 available in colours 01 and 15

code 9908 max 64 (DALI loads) For the system definition, refer to the instructions

Remote control code 9731

Linealuce LED RGB wall-mounted/pendant (1 load/3 addresses DALI)

Electronic power supply 48á56Vdc designed to mount on a DIN standard profile

available in colour 01

code BZ14 100W code BZ15 240W code BZ16 480W

Parallel connection No. of products that can be connected / Cable cross section ballast code

BA76

BA77-BB81-BB82-BB87-BB88

BA78-BB83-BB84-BB89-BB90

lamp

21 W max

27 W max

39 W max

section (mm2)

code BZ14 (100 W)

code BZ15 (240 W)

code BZ16 (480 W)

n.

L (m)

n.

L (m)

n.

L (m)

4

4

150

9

200

15

150

2,5

4

150

8

200

14

120

1

4

100

7

150

12

100

4

3

200

7

200

12

120

2,5

3

200

6

200

11

100

1

3

150

6

100

8

100

4

2

150

5

100

8

100

2,5

2

150

5

100

7

100

1

2

150

4

120

5

100

Tension : 56 V Maximum length between the product and any box: 10 m

311

Linealuce wall-mounted/pendant LED J.M. Wilmotte design Jean Michel Wilmotte

iGuzzini

PENDANT LUMINAIRES WALL-WASHER LUMINAIRES CEILING MOUNTED FITTINGS PROFESSIONAL FITTINGS WITH DYNAMIC COLOUR CHANGES

Compliance of LED products with standards is guaranteed only with the use of iGuzzini electronic components.

components code

power

dimensions

Electronic power supply designed to mount on a DIN standard profile BZ14 100 W 73x75x103h VIN=100-120/220-240Vac / 50-60 Hz VOUT= 48÷56Vdc (SELV) for BA76-BA77-BA78-BB81-BB82 BB83-BB84-BB87-BB88-BB89-BB90 Available in colour 00

code

power

dimensions

Electronic power supply designed to mount on a DIN standard profile BZ16 480 W 82x124x127h VIN=100-240Vac±15%/ 50-60 Hz VOUT= 48÷56Vdc (SELV) for BA76-BA77-BA78-BB81-BB82 BB83-BB84-BB87-BB88-BB89-BB90 Available in colour 00

Electronic power supply designed to mount on a DIN standard profile BZ15 240 W 60x124x117h VIN=100-240Vac±15%/ 50-60 Hz VOUT= 48÷56Vdc (SELV) for BA76-BA77-BA78-BB81-BB82 BB83-BB84-BB87-BB88-BB89-BB90 Available in colour 00

accessories code

length

Coloured filters 5592 335 for B745-B746-BB65-BB69 5504 575 for B747-B748-BB66-BB70 5505 879 for B749-B750-BB67-BB71-BB81 BB82-BB87-BB88 5506 1175 for B751-B752-BB68-BB72 Available in colours 02-06-26-D7

code

Available in colour 15

312

length

Antiglare screen 5594 375 for B745-B746-BB65-BB69 5508 636 for B747-B748-BB66-BB70 5554 685 for BA76 5509 940 for B749-B750-BA77-BB67-BB71 BB81-BB82-BB87-BB88 5510 1236 for B751-B752-BB68-BB72 5561 1300 for BA78-BB83-BB84-BB89-BB90

Linealuce wall-mounted J.M. Wilmotte design Jean Michel Wilmotte

WALL-WASHER LUMINAIRES CEILING MOUNTED FITTINGS

iGuzzini 03

15

lamp

Module complete with Xenon lamps and electronic transformer - flood optic 7867 6x8,5 W 12 V 7869 10x8,5 W 12 V 7872 16x8,5 W 12 V

length ,PD[ FG .OP & J ƒ /X[ .OP ƒ

539 859 1339

; : ;(121 7

ƒ

ƒ

D

ƒ ƒ ƒ

K

G

G (P (PD[

57

code

75 116

IP66 IK05

Other lenghts available on request (L min = 381 mm, L max = 1339 mm)

Installation systems are illustrated on page 315

accessories code

Coloured filters 5529 for 7867 5531 for 7869 5534 for 7872

length

520 840 1320

Available in colours 05-06-07-09-65

code

Longitudinal baffle cut-off 60° 5557 for 7867 5559 for 7869 5562 for 7872

length

480 800 1280

Available in colour 04 Antiglare screen 5536 for 7867 5538 for 7869 5541 for 7872

539 859 1339

Available in colour 15

Transverse baffle cut off 40° 5564 for 7867 5566 for 7869 5569 for 7872

480 800 1280

Available in colour 04 Longitudinal baffle cut-off 40° 5550 for 7867 5552 for 7869 5555 for 7872

480 800 1280

Available in colour 04

313

Linealuce wall-mounted/pendant J.M. Wilmotte design Jean Michel Wilmotte

PENDANT LUMINAIRES WALL-WASHER LUMINAIRES CEILING MOUNTED FITTINGS

iGuzzini 03

15

lamp

length

Fluorescent module with electronic control gear - flood optic 7862 14 W T 16 638 7863 21 W T 16 942 7864 28 W T 16 1238 7865 35 W T 16 1538

,PD[ FG .OP & J ƒ /X[ .OP ƒ

: 7 *

ƒ

ƒ

D

ƒ ƒ ƒ

K

G

G (P (PD[

76

code

75

IP66 IK05

Fluorescent module with digital dimmable electronic control gear (DALI) - flood optic B857 21 W T 16 942 B858 28 W T 16 1238 B859 35 W T 16 1538

,PD[ FG .OP & J ƒ /X[ .OP ƒ

: 7 *

ƒ

ƒ

D

ƒ ƒ ƒ

K

G

G (P (PD[

IP66 IK05

Single entrance for power cord 14 W (L=668 mm) version available upon request Occupies 1 DALI address Installation systems are illustrated on page 315

accessories code

Coloured filters 5504 for 7862 5505 for 7863-B857 5506 for 7864-B858 5507 for 7865-B859

length

575 879 1175 1472

Available in colours 05-06-07-09-65

code

Longitudinal baffle cut-off 60° 5520 for 7862 5521 for 7863-B857 5522 for 7864-B858 5523 for 7865-B859

length

560 880 1120 1440

Available in colour 04 Antiglare screen 5508 for 7862 5509 for 7863-B857 5510 for 7864-B858 5511 for 7865-B859 Available in colour 15

636 940 1236 1538

Transverse baffle cut off 40° 5524 for 7862 5525 for 7863-B857 5526 for 7864-B858 5527 for 7865-B859

565 867 1119 1443

Available in colour 04 Longitudinal baffle cut-off 40° 5516 for 7862 5517 for 7863-B857 5518 for 7864-B858 5519 for 7865-B859 Available in colour 04

314

560 880 1120 1440

Linealuce wall-mounted/pendant J.M. Wilmotte design Jean Michel Wilmotte

PENDANT LUMINAIRES WALL-WASHER LUMINAIRES CEILING MOUNTED FITTINGS

iGuzzini

installation systems code

code

Plate used for support or ceiling installation 5570 for 7862-7863-7867-7869-B745-B746 B747-B748-B749-B750-B857-BA76 BA77-BB65-BB66-BB67-BB69-BB70 BB71-BB79-BB80-BB81-BB82-BB85 BB86-BB87-BB88 5571 for 7864-7865-7872-B751-B752-B858 B859-BA78-BB68-BB72-BB83-BB84 BB89-BB90

Brackets for balustrade mounting L=297 mm 5578 5

1

Available in colour 15

Suspension cable with power supply L=2000 mm 5589* Suspension cable with power supply for FL DALI L=2000 mm cables BZ10 for B857-B858-B859 6

Available in colour 00 2 Wall mounting bracket 5572 for 7862-7863-B745-B746-B747-B748 B749-B750-B857-BA76-BA77-BB65 BB66-BB67-BB69-BB70-BB71-BB79 BB80-BB81-BB82-BB85-BB86 BB87-BB88 5573 for 7864-7865-B751-B752-B858 B859-BA78-BB68-BB72-BB83 BB84-BB89-BB90 5574 for 7867-7869 5575 for 7872

Available in colour 15 Suspension cable without power supply L=2000 mm 5588 Available in colour 00 * For RGB versions we recommend using 2 units (1 for the power line and 1 for the DALI line)

Available in colour 15 7 Rod with power supply L=565 mm 5591* Rods for power supply for FL DALI control gear L=565 mm BZ11 for B857-B858-B859 Rod without power supply L=565 mm 5590

3 Arms adjustable by +/- 90째 L=138 mm 5576

Available in colour 15

4

Arms extendable from 309 to 389 mm and adjustable by +/-90째 5577

Available in colour 15 * For RGB versions we recommend using 2 units (1 for the power line and 1 for the DALI line)

Available in colour 15

1

2

3

4

5

6

7

The vast range of installation systems designed for Linealuce enables a wide variety of applications designed to blend in with any architectural setting.

315

Linealuce recessed design Jean Michel Wilmotte

RECESSED FITTINGS FOR PEDESTRIAN AREAS RECESSED FITTINGS WALL-WASHER LUMINAIRES PROFESSIONAL FITTINGS WITH DYNAMIC COLOUR CHANGES

iGuzzini

G

S

A

ERG

Y

E

N

V I N

LED version page 317

FL version page 321

Xenon version page 320 Static load resistance 1000 Kg

Version with symmetrical optic equipped with no-skid glass

Direct dim (for RGB and DALI monochromatic versions)

Switch dim (for FL DALI versions)

• Fitting for direct lighting and wall washer, for use with fluorescent, XENON lamps, monochromatic LEDs and RGB LEDs. • Recessed installation for the floor, wall, and ceiling. • Fitting has a body and counterframe for installation (which can be ordered separately). • Extruded aluminium body, with die-cast aluminium end caps complete with silicone gaskets. • Optical compartment closed on the top with a semi-acid-finished or noskid glass screen (compliant with class R12 according to the DIN 51130 norm) fastened with silicone. • Fluorescent versions with ultrapure reflector Symmetric (S) and Asymmetric (A) optic. • Aluminium counterframe with techno polymer caps. • Monochromatic LED versions complete with multi-LED power plate in Neutral White 4200K and warm white 3100K other colours and cool white 6700K upon request); spot optics with plastic lens for wallwasher (WW) and flood (F) version. Complete with translucid plastic filter. Available dimmable version with DALI 48-56Vdc digital electronic control board. • RGB LED version complete with red, green and blue LED circuit, DALI 48÷56Vdc control card, and optics with plastic lenses (flood). • DALI RGB LED versions are provided with RGB DIRECT DIM for dimming Impact resistance: IK10

316

Low temperature

Low maintenance (long life of LED) for LED version

Feedthrough cabling

with standard button with the following functions: Soft ON/OFF, colour change, last colour memory, default dynamic sequence. • DALI monochromatic LED versions are provided with DIRECT DIM for dimming with standard button with the following functions: Soft ON/OFF, dimming, last intensity level memory. • DALI FL LED versions are provided with SWITCH DIM for dimming with standard button with the following functions: Soft ON/OFF, dimming, last intensity level memory. • Electronic power supply group contained inside the fitting (dimmable fluorescent and monochromatic LED version); 48÷56Vdc power supply to be ordered separately for RGB LED version and DALI dimmable monochromatic LED. • Ready for pass-through cables with two PG11 cable clamps in nickel-plated brass for cables with diameters between 6.5 and 11mm (except LED and FL dimmable version with single power cable entrance). • All external screws are A2 stainless steel. • The technical characteristics of the fitting comply with EN60598-1 standard. • IP67 IK10 • F seal • IMQ approval (solo versioni FL) • Class of Insulation I/II

Linealuce recessed LED design Jean Michel Wilmotte

RECESSED FITTINGS FOR PEDESTRIAN AREAS WALL-WASHER LUMINAIRES PROFESSIONAL FITTINGS WITH DYNAMIC COLOUR CHANGES

iGuzzini

15

lamp

length

Monochromatic LED recessed luminaire with electronic power supply and semi-acid-finished glass - wall washer optic BB73 14x1 W neutral white 668 BA53 14x1 W warm white 668 BB74 21x1 W neutral white 972 BA56 21x1 W warm white 972 BB75 28x1 W neutral white 1268 BA59 28x1 W warm white 1268 IP67 IK10

/X[ ƒ

[ : 1HXWUDO /('

ƒ

ƒ

D

K

ƒ

ƒ

,PD[ FG

Monochromatic LED recessed luminaire with dimmable DALI and semi-acid-finished glass - wall washer optic BB93* 27Wmax 21 neutral white 972 BB94* 27Wmax 21 warm white 972 BB95 39Wmax 30 neutral white 1334 BB96 39Wmax 30 warm white 1334

[ : 1HXWUDO /('

ƒ

ƒ

ƒ

/('

ƒ ƒ

ƒ

,PD[ FG

/('

ƒ ƒ

ƒ

,PD[ FG

/('

Monochromatic LED recessed luminaire with electronic power supply and no-skid glass - flood optic BB76 14x1 W neutral white 668 BA62 14x1 W warm white 668 BB77 21x1 W neutral white 972 BA65 21x1 W warm white 972 BB78 28x1 W neutral white 1268 BA68 28x1 W warm white 1268 IP67 IK10

ƒ

ƒ

ƒ

,PD[ FG

/('

ƒ

ƒ

D

ƒ ƒ

,PD[ FG

Monochromatic LED recessed luminaire with dimmable DALI and no-skid glass - flood optic BB99* 27Wmax 21 neutral white 972 BC01* 27Wmax 21 warm white 972 BC02 39Wmax 30 neutral white 1334 BC03 39Wmax 30 warm white 1334

/('

ƒ

ƒ ƒ

,PD[ FG

[ : 1HXWUDO /('

ƒ

ƒ

D

ƒ

ƒ

,PD[ FG

/('

ƒ

ƒ

D

ƒ ƒ

,PD[ FG

/('

ƒ

ƒ

D

ƒ

G

(P

(PD[

G

(P

(PD[

G

(P

(PD[

G

(P

(PD[

K

G

(P

(PD[

K

G

(P

(PD[

K

G

(P

(PD[

K

G

(P

(PD[

/X[ ƒ

: /(' 1HXWUDO

/X[ ƒ

: /(' 1HXWUDO

/X[ ƒ

Neutral white = 4200K Warm white = 3100K

*L=719mm 21Wmax 15 LED version available upon request Power supply to be ordered separately. Occupies 1 DALI address

ƒ

D

/X[ ƒ

[ : 1HXWUDO

/X[ ƒ

[ : 1HXWUDO

K

Neutral white = 4200K Warm white = 3100K

Complete with lamp . On request monochromatic LED cool white (6700K) and blue version

IP67 IK10

ƒ

D

/X[ ƒ

: /(' 1HXWUDO

K

ƒ

D

101

/X[ ƒ

: /(' 1HXWUDO

K

ƒ

D

G

/X[ ƒ

[ : 1HXWUDO

(PD[

K

,PD[ FG

Neutral white = 4200K Warm white = 3100K

*L=719mm 21Wmax 15 LED version available upon request Power supply to be ordered separately. Occupies 1 DALI address

ƒ

D

(P

/X[ ƒ

Neutral white = 4200K Warm white = 3100K

Complete with lamp . On request monochromatic LED cool white (6700K) and blue version

IP67 IK10

,PD[ FG

117

code

ƒ

K

G

(P

(PD[

317

Linealuce recessed LED design Jean Michel Wilmotte

RECESSED FITTINGS FOR PEDESTRIAN AREAS WALL-WASHER LUMINAIRES PROFESSIONAL FITTINGS WITH DYNAMIC COLOUR CHANGES

iGuzzini

15

lamp

length

LED recessed luminaire with RGB dynamic colour change DALI and semiacid-finished glass - wall washer optic BA70 21Wmax 15 LED 48á56Vdc 719 BA71 27Wmax 21 LED 48á56Vdc 972 BA72 39Wmax 30 LED 48á56Vdc 1334

,PD[ FG

& J ƒ /X[ ƒ

ƒ

: /(' 5*%

ƒ

/('

D

ƒ

ƒ ƒ

K

G

G (P (PD[

101

117

code

IP67 IK10 ,PD[ FG

& J ƒ /X[ ƒ

Complete with lamp and electronic DALI control card. Power supply to be ordered separately. Occupies 3 DALI addresses

ƒ

: /(' 5*%

ƒ

/('

D

ƒ

ƒ ƒ

,PD[ FG

ƒ

LED recessed luminaire with RGB dynamic colour change DALI and no-skid glass - flood optic BA73 21Wmax 15 LED 48á56Vdc 719 BA74 27Wmax 21 LED 48á56Vdc 972 BA75 39Wmax 30 LED 48á56Vdc 1334

ƒ

/('

D

ƒ

ƒ ƒ

,PD[ FG

ƒ

ƒ

/('

D

G (P (PD[

K

G

G (P (PD[

& J ƒ /X[ ƒ

: /(' 5*%

G

& J ƒ /X[ ƒ

: /(' 5*%

K

ƒ ƒ

K

G

G (P (PD[

IP67 IK10 ,PD[ FG

/X[ ƒ

Complete with lamp and electronic DALI control card. Power supply to be ordered separately. Occupies 3 DALI addresses

ƒ

: /(' 5*%

ƒ

/('

D

ƒ

ƒ

,PD[ FG

ƒ

ƒ

/('

D

G

(P

(PD[

K

G

(P

(PD[

Transmission coefficient (K)

/X[ ƒ

: /(' 5*%

K

ƒ

ƒ

Colour

K

White 6000K Cyan Orange Magenta Yellow Green Red Blue

1 0,44 0,57 0,45 0,90 0,70 0,34 0,23

Data refers to 6000K white light

Block diagram of Colour Quick system for Linealuce recessed LED RGB

Remote units

Main unit

Components

Colour Quick

Electronic power supply designed to mount on a DIN standard profile 220á240V 24Vdc

Luminaires

Linealuce is also compatible with other light control systems of the iGuzzini range illustrated in this catalogue.

code 9730 available in colours 01 and 15

code 9908 max 64 (DALI loads) For the system definition, refer to the instructions

Remote control code 9731 available in colour 01

Electronic power supply 48á56Vdc designed to mount on a DIN standard profile code BZ14 100W code BZ15 240W code BZ16 480W

318

Linealuce recessed LED RGB (1 load/3 addresses DALI)

Linealuce recessed LED design Jean Michel Wilmotte

RECESSED FITTINGS FOR PEDESTRIAN AREAS WALL-WASHER LUMINAIRES PROFESSIONAL FITTINGS WITH DYNAMIC COLOUR CHANGES

iGuzzini

Parallel connection No. of products that can be connected / Cable cross section ballast code

lamp

section (mm2)

21 W max

BA70-BA73

27 W max

BA71-BA74-BB93-BB94-BB99-BC01

39 W max

BA72-BA75-BB95-BB96-BC02-BC03

code BZ14 (100 W)

code BZ15 (240 W)

code BZ16 (480 W)

n.

L (m)

n.

L (m)

n.

4

4

150

9

200

15

150

2,5

4

150

8

200

14

120

1

4

100

7

150

12

100

4

3

200

7

200

12

120

2,5

3

200

6

200

11

100

1

3

150

6

100

8

100

4

2

150

5

100

8

100

2,5

2

150

5

100

7

100

1

2

150

4

120

5

100

L (m)

Tension : 56 V Maximum length between the product and any box: 10 m Compliance of LED products with standards is guaranteed only with the use of iGuzzini electronic components.

components code

power

dimensions

Electronic power supply designed to mount on a DIN standard profile BZ14 100 W 73x75x103h VIN=100-120/220-240Vac / 50-60 Hz VOUT= 48÷56Vdc (SELV) for BA70-BA71-BA72-BA73-BA74-BA75 BB93-BB94-BB95-BB96-BB99-BC01 BC02-BC03 Available in colour 00

code

power

dimensions

Electronic power supply designed to mount on a DIN standard profile BZ16 480 W 82x124x127h VIN=100-240Vac±15%/ 50-60 Hz VOUT= 48÷56Vdc (SELV) for BA70-BA71-BA72-BA73-BA74-BA75 BB93-BB94-BB95-BB96-BB99-BC01 BC02-BC03 Available in colour 00

Electronic power supply designed to mount on a DIN standard profile BZ15 240 W 60x124x117h VIN=100-240Vac±15%/ 50-60 Hz VOUT= 48÷56Vdc (SELV) for BA70-BA71-BA72-BA73-BA74-BA75 BB93-BB94-BB95-BB96-BB99-BC01 BC02-BC03 Available in colour 00

accessories and installation systems code

dimensions

length

Coloured filters 5504 575 for BA53-BA62-BB73-BB76 5505 879 for BA56-BA65-BB74-BB77-BB93 BB94-BB99-BC01 5506 1175 for BA59-BA68-BB75-BB78

code

Steel cable L = 570 mm 5926 For ceiling application Available in colour 00

Available in colours 02-06-26-D7 Casing 5902 132x122 648 for BA53-BA62-BB73-BB76 BZ12 132x122 698 for BA70-BA73 5903 132x122 953 for BA56-BA65-BA71-BA74-BB74-BB77 BB93-BB94-BB99-BC01 5904 132x122 1250 for BA59-BA68-BB75-BB78 BZ13 132x122 1313 for BA72-BA75-BB95-BB96-BC02-BC03

Steel cable L = 200 mm 5925 For wall application Available in colour 00

Available in colour 00 319

Linealuce recessed J.M. Wilmotte design Jean Michel Wilmotte

RECESSED FITTINGS FOR PEDESTRIAN AREAS WALL-WASHER LUMINAIRES

iGuzzini

15

lamp

length

Recessed luminaire complete with Xenon lamps and electronic transformer - wall washer optic 7884 6x8,5 W 12 V 610 7886 10x8,5 W 12 V 930 7889 16x8,5 W 12 V 1410

,PD[ FG .OP & J ƒ /X[ .OP ƒ

; : ;(121 7

ƒ

ƒ

D

ƒ ƒ ƒ

K

G

G (P (PD[

IP67 IK10

Other lenghts available on request (L min = 414 mm, L max = 1410 mm)

accessories and installation systems code

dimensions

Coloured filters 5529 for 7884 5531 for 7886 5534 for 7889

length

code

520

Steel cable L = 570 mm 5926

840

For ceiling application

1320

Available in colour 00

Available in colours 05-06-07-09-65 Micro-perforated screen 5919 for 7884 5921 for 7886 5924 for 7889

516

Steel cable L = 200 mm 5925

836

For wall application

1316

Available in colour 04 Casing 5907 for 7884 5909 for 7886 5912 for 7889

132x140

590

132x140

910

132x140

1392

Available in colour 00 320

Available in colour 00

101

135

code

Linealuce recessed J.M. Wilmotte design Jean Michel Wilmotte

RECESSED FITTINGS FOR PEDESTRIAN AREAS WALL-WASHER LUMINAIRES

iGuzzini

15

lamp

length

Fluorescent recessed luminaire with electronic control gear - wall washer optic 7878 8W T 16 414 7879 14 W T 16 668 7880 21 W T 16 972 7881 28 W T 16 1268 7882 35 W T 16 1568

,PD[ FG .OP & J ƒ /X[ .OP ƒ

: 7 *

ƒ

ƒ

D

ƒ

K

G

ƒ ƒ

101

G (P (PD[

117

code

IP67 IK10

Fluorescent recessed luminaire with digital dimmable electronic control gear (DALI) - wall washer optic B861 21 W T 16 972 B862 28 W T 16 1268 B863 35 W T 16 1568 IP67 IK10

Ready for pass-through cables 14W (L=668 mm) version available upon request Occupies 1 DALI address Fluorescent recessed luminaire with electronic control gear - flood optic 7890 14 W T 16 668 7891 21 W T 16 972 7892 28 W T 16 1268 7893 35 W T 16 1568

,PD[ FG .OP & J ƒ /X[ .OP ƒ

: 7 *

ƒ

ƒ

D

ƒ ƒ ƒ

K

G

G (P (PD[

IP67 IK10

Fluorescent recessed luminaire with digital dimmable electronic control gear (DALI) - flood optic B865 21 W T 16 972 B866 28 W T 16 1268 B867 35 W T 16 1568 IP67 IK10

Ready for pass-through cables 14W (L=668 mm) version available upon request Occupies 1 DALI address

accessories and installation systems code

Coloured filters 5501 for 7878 5504 for 7879-7890 5505 for 7880-7891-B861-B865 5506 for 7881-7892-B862-B866 5507 for 7882-7893-B863-B867

length

320 575 879 1175 1475

code

dimensions

Casing 5901 132x122 for 7878 5902 132x122 for 7879-7890 5903 132x122 for 7880-7891-B861-B865 5904 132x122 for 7881-7892-B862-B866 5905 132x122 for 7882-7893-B863-B867

Available in colours 05-06-07-09-65

Available in colour 00

Micro-perforated screen 5913 for 7878 5914 for 7879 5915 for 7880-B861 5916 for 7881-B862 5917 for 7882-B863

322

Steel cable L = 570 mm 5926

574

For ceiling application

878

Available in colour 00

Available in colour 04

length

394 648 953 1250 1550

1174 1474

Steel cable L = 200 mm 5925 For wall application Available in colour 00 321

Light Up Walk professional is the evolution of ground recessed luminaires. It is characterised by state-of-the-art design with on circular and square shapes and customised frames, high resistance to static load and large selection of optics for optimal use in multiple settings, including drive-over spaces.

322

Light up Walk Professional exalts the values of architecture and green areas. From small signs of light to diffused lighting, the ground becomes a surface that emits energy, shows paths and creates suggestions, also thanks to the use of RGB and white LED's with warm and neutral white colour temperatures.

Light Up Walk professional design Jean Michel Wilmotte

iGuzzini

The product has been awarded the following prize: - iF Design Award 2004

LED version

RGB version

Light management systems

Static load strength 5000 kg

Temperature < 75째

Visual comfort

Versions with antislip glass

323

Light Up Walk professional design Jean Michel Wilmotte

iGuzzini

A wide range of light sources, optics and accessories - associated to endless pointing and adjustment possibilities - permits meeting any photometric requirement.

Wall-washer optic low wattage Effectively illuminates horizontally extending elements that are not particularly high. • Highlights writing on horizontal surfaces of hotels • Low walls, hedges close to the floor. • Façades of not particularly tall buildings

TC-D 18 W (B003) OPTIMAL UNIFORMITY

E2

E1

D

I0

E1

E2

0,7m (min)

3,5 m

43 lux

10 lux

1,5m (max)

3,5 m

22 lux

20 lux

UNIFORMITY LIMIT 2m

D

IL

E1

E2

0,7m (min)

5,5 m

35 lux

3 lux

1,5m (max)

5,5 m

16 lux

6 lux

D =

= I

Wall-washer optic medium wattage A wide distribution with soft margins and a maximum intensity of about 70 degrees to the horizontal plane makes it excellent for illuminating façades in a uniform manner. • Office blocks • Multifunctional buildings • Hotels

HIT 35 W (B007) OPTIMAL UNIFORMITY

E2

E1

D

I0

E1

E2

0,7m (min)

3,5 m

75 lux

25 lux

1,5m (max)

3,5 m

50 lux

20 lux

UNIFORMITY LIMIT 2m

D

IL

E1

0,7m (min)

6m

90 lux

3 lux

1,5m (max)

6m

50 lux

15 lux

E2

D =

=

I

Wall-washer optic medium wattage A wide distribution with defined margins and a maximum intensity of about 60 degrees to the horizontal plane allows for the façade to be illuminated. • Modern office blocks • Multifunctional buildings • Hotels

TC-TEL 42 W (B028) OPTIMAL UNIFORMITY

E2

E1

D

I0

E1

E2

0,7m (min)

3,5 m

55 lux

32 lux

1,5m (max)

3,5 m

70 lux

50 lux

UNIFORMITY LIMIT 2m

D

IL

E1

0,7m (min)

5,5 m

50 lux

6 lux

1,5m (max)

5,5 m

65 lux

15 lux

E2

D =

=

I

Wall-washer optic high wattage A very wide distribution, with soft margins and maximum intensity of about 70 degrees to the horizontal plane allows for the façade to be illuminated in a uniform manner. • Façades of large buildings (e.g. apartment blocks, office blocks, sports halls, big hotels)

HIT 70 W (B020) OPTIMAL UNIFORMITY

E2

E1

D

I0

E1

E2

0,7m (min)

4m

500 lux

72 lux

1,5m (max)

4m

90 lux

55 lux

UNIFORMITY LIMIT 2m

D

IL

E1

0,7m (min)

7,5 m

360 lux

5 lux

1,5m (max)

7,5 m

85 lux

10 lux

E2

D =

= I

I0 = optimal interdistance IL = interdistance limit Dmin = Minimum distance from the wall to the centre of the recessed fitting Dmax = Maximum distance from the wall to the centre of the recessed fitting E1 = measured lighting on the wall, on an axis for each recessed fitting and 2 m from the ground E2 = measured lighting on the wall, on an axis for each recessed fitting and 2 m from the ground

324

Light Up Walk professional design Jean Michel Wilmotte

iGuzzini

Pathways, relief elements, volumes, architectural structures, monuments, parks, and whole surfaces are all possible fields of application.

Adjustable Flood optic, medium power The fluorescent lamp gives off soft lighting in confined exterior spaces. • Porches and balconies • Shelters and platform roofs

TC-TEL 42 W (B010)

L1

ill. ab L1xL2

Emax

Emed

2m

3x3m

72 lux

53 lux

3m

5x5m

32 lux

22 lux

4m

6x6m

18 lux

14 lux

5m

6,5x6,5m

11 lux

10 lux

h L2

h

Adjustable Spot optic medium wattage Highlights architectural details on vertical façades. • Columns, monuments • Accent lighting of façades and architectural reliefs

HIT 35 W (B009) L

α

C C1 C2 Co B

Adjustable Spot optic high wattage Highlights architectural details on high façades. • Vertical buildings • Hotels • Sports buildings and arenas

B L C E C1 E1 C2 E2 C0 E0

(m) (m) (m) lux (m) lux (m) lux (m) lux

0° 0,3 2 10 16 5 80 2,5 95 0,5 28

orientation 3° 0,7 2,2 10 50 5 68 2,5 22 0,5 <10

7° 1 2,8 10 70 5 150 2,5 15 0,5 <10

HIT 70 W (B022) L

α

C C1 C2 Co B

Adjustable Spot optic high wattage Highlights architectural details on high façades. • Bells and towers • Large hotels • Very tall Buildings

B L C E C1 E1 C2 E2 C0 E0

(m) (m) (m) lux (m) lux (m) lux (m) lux

0° 0,4 2,4 15 7 7,5 35 4 60 0,5 21

orientation 3° 1 3,6 15 25 7,5 36 4 18 0,5 <10

7° 1,5 3,4 15 35 7,5 80 4 10 0,5 <10

HIT 150 W (B023) L

α

C C1 C2 Co B

B L C E C1 E1 C2 E2 C0 E0

(m) (m) (m) lux (m) lux (m) lux (m) lux

orientation 0° 0,4 2,4 20 5 10 35 5 125 0,5 =

B = distance from the wall C = height of the illuminated area C0 = lower limit of the area Emed = average lighting in the area Emax = imax lighting in the area L = beam width α = orientation of the projector with respect to the vertical plane E = illuminance at height C E1 = illuminance at height C1 E2 = illuminance at height C2 E0 = illuminance at height C0

3° 1 3,6 20 12 10 80 5 55 1 <10

325

Light Up Walk professional design Jean Michel Wilmotte

iGuzzini

A very flexible line of ground recessed luminaires capable of being installed with discretion in multiple settings to exalt and underscore details and small elements. The innovative spot optic made of two individually adjustable Spot optic (S) α=10° double-adjustable The planar position of the optical assembly illuminates vertical surfaces with a very uniform luminous flow, close to wall-washing effect.

sections permits to direct the luminous flow according to objects and surfaces to be illuminated, without losing luminous intensity in each single part of the optical assembly.

LED 12x1W (BB33) h

ill. ab L1xL2

Emax

Emed

8m

1,5 m

170 lux

120 lux

12 m

2m

75 lux

55 lux

16 m

3m

40 lux

30 lux

h

ill. ab L1xL2

Emax

Emed

6m

2m

150 lux

110 lux

9m

3m

70 lux

50 lux

12 m

4m

40 lux

28 lux

h

ill. ab L1xL2

Emax

Emed

4m

0,7 m

500 lux

170 lux

8m

1,5 m

130 lux

40 lux

12 m

2m

60 lux

18 lux

h

ill. ab L1xL2

Emax

4m

3m

280 lux

85 lux

8m

7m

70 lux

20 lux

12 m

10 m

30 lux

10 lux

FLAT

Spot optic (S) α=20° double-adjustable The inclination of only one section of the optical assembly creates a luminous contrast that valorises both vertical and horizontal surfaces of arcades and vaults.

LED 12x1W (BB33)

SEMIFLAT

Spot optic (S) α=10° double-adjustable The oblique position in the same direction of both sections of the optical assembly permits to exalt statues, monuments and structural details.

LED 12x1W (BB33)

OBLIQUE

Spot optic (S) α=40° double-adjustable The flow distribution changes and the two sections of the optic with opposite orientation convert the spot light cone into medium and the flood emission into wideflood.

LED 12x1W (BB33)

DIVERGENT

Emed = average lighting in the area Emax = imax lighting in the area h= Installation height

326

Emed

Light Up Walk professional design Jean Michel Wilmotte

iGuzzini ERG

Y

E

N

Compact height

Adjustable product

Double-adjustability for LED versions

G

S

A

V I N

Direct dim (for RGB versions)

• Ground-recessed fitting, for use with halogen, XELOGEN, metal halide, fluorescent, sodium discharge, monochromatic and RGB LEDs. • Fittings installed as ground-recessed luminaires • Light Up Walk has a body (round or square, in three different sizes), chassis (tall or short) and exterior bezel. • Cast aluminium structure; stainless steel AISI 304 bezel; tempered sealing glass; silicone water tight gasket; antiglare screens designed for visual comfort. Nickel-plated brass M15x1 cable clamp (M11x1 for the small round model) for the connection between the lower compartment and the upper compartment. Load-bearing capability up to 5000 Kg; maximum external glass temperature rated up to 75° C (except as otherwise specifically indicated). Positioning and anchoring of the compartment relative to the chassis ensured by the blocking system. • Cast aluminium installation box can be ordered separately. • Multiplexing interconnection box where the cables can be connected in series. • 6 pole terminal block and double M24x1,5 cable clamp (twin terminals and PG11 for the small model).

118

Connector block

RECESSED FITTINGS FOR DRIVEWAYS PROFESSIONAL FITTINGS WITH DYNAMIC COLOUR CHANGES

Decompression box

Double PG

• Power supply with a non-explosive power factor correction capacitor, ballast and starter. • D=312mm monochromatic LED version with 12-LED circuit, orientable optics with plastic lenses, and equipped with electronic power supply. Ready for pass-through wiring. • D=312mm RGB LED version with 12-LED multicolour circuit, DALI 48÷56Vdc electronic control card, electronic power supply (ordered separately), orientable optics with plastic lenses. Single entrance for power supply cable and DALI control cable. • DALI RGB LED versions are provided with RGB DIRECT DIM for dimming with standard button with the following functions: Soft ON/OFF, colour change, last colour memory, default dynamic sequence. • All screws are A2 stainless steel. • The technical characteristics of the fitting comply with EN60598-1 standard. • IP67 IK10 • F seal • IMQ approval • Class of Insulation II/III

Easy installation

327

Light Up Walk professional design Jean Michel Wilmotte

RECESSED FITTINGS FOR DRIVEWAYS PROFESSIONAL FITTINGS WITH DYNAMIC COLOUR CHANGES

iGuzzini

A drainage channel needs to be made under the counterframe before installation. floor

ground or concrete

gravel layer for drainage or concrete

circular recessed luminaire

code

optic

lamp

B032

MEDIUM

10 W QT9/XELOGEN

B001

WALL WASHER

10 W QT9/XELOGEN

B002

ADJUSTABLE

20 W QR CBC 35

B183

SIGNALLING

drainage pipe

t°max glass

casing B900 118

ø 236 117

ø 130

B958 ø124

1 W LED cool white

medium-sized low body

90

30° C 1 W LED blue

B184

SIGNALLING

B004

FLOOD

18 W TC-D

50° C

B006

SPOT

20 W HIT (CDM-TC)

55° C

B008

SPOT

35 W HIT (CDM-T)

75° C

B003

WALL WASHER

18 W TC-D

50° C

B005

WALL WASHER

20 W HIT (CDM-TC)

55° C

B007

WALL WASHER

35 W HIT (CDM-T)

75° C

BB33

SPOT ADJUSTABLE

12x1 W LED neutral white

BB34

SPOT ADJUSTABLE

12x1 W LED warm white

BB35

FLOOD ADJUSTABLE

12x1 W LED neutral white

BB36

FLOOD ADJUSTABLE

12x1 W LED warm white

BB37

FLOOD ADJUSTABLE

B015

FLOOD

B017

FLOOD

26/32/42 W TC-TEL

45° C

B019

FLOOD

57 W TC-TEL

55° C

B021

SPOT

70 W HST-DE/HIT-DE

95° C

B014

WALL WASHER

26 W TC-D

45° C

B016

WALL WASHER

26/32/42 W TC-TEL

50° C

B018

WALL WASHER

57 W TC-TEL

60° C

B020

WALL WASHER

70 W HST-DE/HIT-DE

85° C

B009

SPOT ADJUSTABLE

35 W HIT (CDM-T)

60° C

B012

SPOT ADJUSTABLE

70 W HIT (CDM-T)

80° C

B010

SPOT ADJUSTABLE

B011

SPOT ADJUSTABLE

35 W HI-PAR 20

70° C

B013

SPOT ADJUSTABLE

50 W PAR 20

65° C

B022

SPOT ADJUSTABLE

70 W HIT

70° C

B023

SPOT ADJUSTABLE

150 W HIT

130° C

B024

SPOT ADJUSTABLE

100 W HST (SDW-T)

75° C

B025

SPOT ADJUSTABLE

150 W HIT

75° C

B026

SPOT ADJUSTABLE

140

small body

ø 124

70° C

333

B901

124

ø 410

medium-sized high body

ø 382

313

ø 312

ø 188

ø 410

125 ø 397

40° C

24 Wmax 12 LED RGB 26 W TC-D

40° C

B903 ø 385 126

large low body

ø 211

ø 289

ø 495

B902 ø 289

26/32/42 W TC-TEL

65° C 350

124

ø 312

ø 397

B004

ø 410

ø 255

260

70 W HIT (CDO-TT) /HST

350 ø 495

B005 ø 386 170 350

316 ø 255

137 316

large high body

ø 386

70° C 837

328

Light Up Walk professional design Jean Michel Wilmotte

square recessed luminaire

code

RECESSED FITTINGS FOR DRIVEWAYS PROFESSIONAL FITTINGS WITH DYNAMIC COLOUR CHANGES

iGuzzini

optic

t°max glass

lamp

B255

FLOOD

10 W QT9/XELOGEN

B254

WALL WASHER

10 W QT9/XELOGEN

B256

ADJUSTABLE

20 W QR CBC 35

B257

SIGNALLING

casing B962 118 239

117

130

B963 124

1 W LED cool white

medium body

SIGNALLING

B027

WALL WASHER

1 W LED blue

348

70 W HST-DE/HIT-DE

B906

70° C

324

B028

220

B029

55° C

26/32/42 W TC-TEL

380

WALL WASHER

150 W HST-DE/HIT-DE

B907

75° C

422

B030

319

57 W TC-TEL

262

50° C 477

B908 250 W HIT-DE

90° C

310 361

versions with antislip glass

422 170 262

236

B031

WALL WASHER

870

standard code

code with antislip glass

B003

B225

B004

B226

B007

B229

B008

B230

B020

B237

B021

B238

versions with antislip glass square body

319

round body

WALL WASHER

444 137

large body

236

444

WALL WASHER

262

240

346

B258

90

30° C

140

small body

124

70° C

standard code

code with antislip glass

B027

B239

B028

B240

B029

B241

The Light Up Walk Professional skidproof model complies with class R13 according to the DIN 51130 standard. The small circular or square models do not come equipped with skidproof glass. For other standard models not shown the listing, the skidproof glass versions are available upon request. With this type of glass, photometric distribution becomes wide-beam.

329

Light Up Walk professional LED design Jean Michel Wilmotte

RECESSED FITTINGS FOR DRIVEWAYS PROFESSIONAL FITTINGS WITH DYNAMIC COLOUR CHANGES

iGuzzini

13

The maximum temperatures were measured at a voltage of 1.06xVn (nominal voltage) at a room temperature of 25°C, in conformity with the European EN60598-1 standard and more specific regulations lamp

t °C

Small circular LED recessed luminaire with signalling B183 1 W cool white (6700K) B184 1 W blue IP67 IK10

ø130 117

code

30 30

5000 Kg

Complete with lamp and electronic power supply. On request available with LED red and green.

IP67 IK10

130 117

Small square LED recessed luminaire with signalling B257 1 W cool white (6700K) B258 1 W blue

30 30

5000 Kg

Complete with lamp and electronic power supply. On request available with LED red and green.

,PD[ FG

[ : 1HXWUDO /('

D

ƒ

ƒ

[ : 1HXWUDO

Complete with lamp and electronic DALI control card. Power supply to be ordered separately. Occupies 3 DALI addresses

ƒ

ƒ

ƒ

,PD[ FG

Medium-sized low circular LED recessed luminaires with RGB dynamic colour change - adjustable flood optic ¹15° BB37 24 W max 12 LED 48á56Vdc 40 5000 Kg

ƒ

D

/('

ƒ

ƒ

D

G

(P

(PD[

K

G

(P

(PD[

K

G

(P

(PD[

ø 312

ø 211

Transmission coefficient (K)

/X[ ƒ

: /(' 5*%

K

/X[ ƒ

/('

330

ƒ

5000 Kg

Complete with lamp and electronic power supply

IP67 IK10

ƒ

,PD[ FG

Neutral white = 4200K Warm white = 3100K IP67 IK10

/X[ ƒ

124

Medium-sized low circular LED recessed luminaires adjustable spot optic ¹15° BB33 12x1 W neutral white 40 BB34 12x1 W warm white 40 Medium-sized low circular LED recessed luminaires adjustable flood optic 0°-15° BB35 12x1 W neutral white 40 BB36 12x1 W warm white 40

ƒ

ƒ

Data refers to 6000K white light

Colour

K

White 6000K Cyan Orange Magenta Yellow Green Red Blue

1 0.44 1,12 0,72 1,22 1,11 1,22 0,18

Light Up Walk professional LED design Jean Michel Wilmotte

RECESSED FITTINGS FOR DRIVEWAYS PROFESSIONAL FITTINGS WITH DYNAMIC COLOUR CHANGES

iGuzzini

Block diagram of Colour Quick system

Remote units

Main unit

Components

Luminaires

Colour Quick

Electronic power supply designed to mount on a DIN standard profile 220÷240V 24Vdc

Light Up Walk LED RGB professional is also compatible with other light control systems of the iGuzzini range illustrated in this catalogue.

code 9730 available in colours 01 and 15

cod. 9908 max 64 (DALI loads) For the system definition, refer to the instructions

Remote control

Light Up w.p. LED RGB (1 load/3 addresses DALI)

code 9731 available in colour 01

Electronic power supply 48÷56Vdc designed to mount on a DIN standard profile code BZ14 100W code BZ15 240W code BZ16 480W

Parallel connection No. of products that can be connected / Cable cross section ballast code

lamp

BB37

24 W max

section (mm2)

code BZ14 (100 W)

code BZ15 (240 W)

code BZ16 (480 W)

n.

L (m)

n.

L (m)

n.

4

2

300

6

200

11

100

2,5

2

250

6

150

9

100

1,5

2

200

4

120

7

80

L (m)

Tension : 56 V Maximum length between the product and any box: 10 m

Compliance of LED products with standards is guaranteed only with the use of iGuzzini electronic components.

components code

power

dimensions

code

power

dimensions

Electronic power supply designed to mount on a DIN standard profile BZ14 100 W 73x75x103h VIN=100-120/220-240Vac / 50-60 Hz VOUT= 48÷56Vdc (SELV) for BB37 Available in colour 00

Electronic power supply designed to mount on a DIN standard profile BZ16 480 W 82x124x127h VIN=100-240Vac±15%/ 50-60 Hz VOUT= 48÷56Vdc (SELV) for BB37 Available in colour 00

Electronic power supply designed to mount on a DIN standard profile BZ15 240 W 60x124x117h VIN=100-240Vac±15%/ 50-60 Hz VOUT= 48÷56Vdc (SELV) for BB37 Available in colour 00

Connector block without transformer B915 for B183-B184-B257-B258 1m

IP68

Available in colour 04

331

Light Up Walk professional LED design Jean Michel Wilmotte

RECESSED FITTINGS FOR DRIVEWAYS PROFESSIONAL FITTINGS WITH DYNAMIC COLOUR CHANGES

iGuzzini

Measurements of the outer frames are shown in the table on page 328.

accessories and installation systems code ,PD[ FG

Refractor for elliptical distribution of the light flow B922 for BB33-BB34-BB35-BB36-BB37 Available in colour 24

& J ƒ /X[ ƒ

[ : 1HXWUDO /('

ƒ

ƒ

D

ƒ

ƒ ƒ

K

G

G (P (PD[

BB33+B922 ,PD[ FG

Diffusing glass B918 for BB33-BB34-BB35-BB36-BB37

/X[ ƒ

Available in colour 65 [ : 1HXWUDO /('

ƒ

ƒ

D

ƒ

ƒ

K

G

(P

(PD[

BB33+B918

Coloured filters for the version with cool white LED B950 for B183

Outer casing housing connector box B958 for B183-B184

Available in colours 02-06-26-D7

Available in colour 04

Coloured filters for the version with cool white LED B966 for B257

Casing B900 for B183-B184 Available in colour 04

Available in colours 02-06-26-D7 Coloured filters B918 for BB33-BB34-BB35-BB36

Casing B901 for BB33-BB34-BB35-BB36-BB37

Available in colours 05-06-09

Available in colour 04

Bar pictogram B951 for B183-B184 B967 for B257-B258

Cover plate B909 for B900-B958 B910 for B901

Available in colour 00

Available in colour 00

Restaurant pictogram B952 for B183-B184 B968 for B257-B258

Outer casing housing connector box B963 for B257-B258 Available in colour 04

Available in colour 00 Information pictogram B953 for B183-B184 B969 for B257-B258

Casing B962 for B257-B258 Available in colour 04

Available in colour 00 Arrow/Direction pictogram B954 for B183-B184 B970 for B257-B258

Cover plate B964 for B962-B963 Available in colour 00

Available in colour 00 Toilet pictogram B955 for B183-B184 B971 for B257-B258 Available in colour 00 332

Suction cup B916 Available in colour 00

Light Up Walk professional design Jean Michel Wilmotte

RECESSED FITTINGS FOR DRIVEWAYS

iGuzzini

13

The maximum temperatures were measured at a voltage of 1.06xVn (nominal voltage) at a room temperature of 25°C, in conformity with the European EN60598-1 standard and more specific regulations lamp

t °C ,PD[ FG .OP

Small circular recessed luminaires complete with transformer - symmetrical optic B032 10 W QT9/Xelogen 70 IP67 IK10

5000 Kg : 47 *

D

ƒ

(P

47 *

ƒ

ƒ

D

ƒ :

ƒ ƒ

45 &%& *8 D ƒ

,PD[ FG

ƒ

45 &%& *8 D ƒ

P

Data refers to fixtures placed at 0,5 m from the wall

K

G

(P

(PD[

K

G

(P

(PD[

/X[ ƒ

:

/X[ ƒ

5000 Kg

,PD[ FG

Small circular recessed luminaires adjustable optic ¹12° B002 20 W 12 V QR CBC 35 70

ƒ ƒ ƒ

ø130

(PD[

/X[

5000 Kg

Transformer to be ordered separately

ƒ ƒ

G

ƒ

:

IP67 IK10

ƒ

K

,PD[ FG .OP & J ƒ

Small circular recessed luminaires with transformer - wall-washer optic B001 10 W QT9/Xelogen 70 IP67 IK10

/X[ .OP ƒ

117

code

ƒ ƒ

Measurements of the outer frames are shown in the table on page 328.

accessories and installation systems code

code

Coloured filters B917

Cover plate B909 for B900-B958

Available in colours 05-06-09-65 Available in colour 00

Outer casing housing connector box B958

Suction cup B916 Available in colour 00

Available in colour 04

Casing B900 Available in colour 04

Connector block with electronic transformer 60W 12V B914 for B002 Connector block without transformer B915 for B001-B032 1m

IP68

333

Light Up Walk professional design Jean Michel Wilmotte

RECESSED FITTINGS FOR DRIVEWAYS

iGuzzini

13

The maximum temperatures were measured at a voltage of 1.06xVn (nominal voltage) at a room temperature of 25°C, in conformity with the European EN60598-1 standard and more specific regulations lamp

t °C ,PD[ FG .OP & J ƒ /X[ .OP

Medium-sized low circular recessed luminaires - symmetrical optic B004 18 W TC-D 50 IP67 IK10

ƒ

5000 Kg : 7& ' * G

5000 Kg

ƒ

D

ƒ ƒ ƒ

,PD[ FG .OP

Medium-sized low circular recessed luminaires - symmetrical optic B006* 20 W HIT (CDM-TC) 55 B008 35 W HIT 75 IP67 IK10

ƒ

ƒ

ƒ

G

ø 312

G (P (PD[

ø 211

/X[ .OP

ƒ

:

K

124

code

ƒ

+,7 &'0 7& * D ƒ

K

G

(P

(PD[

(PD[

* Complete with electronic control gear ,PD[ FG .OP

/X[ .OP

ƒ

:

ƒ

ƒ

ƒ

+,7 &'0 7 * D ƒ

,PD[ FG .OP

Medium-sized low circular recessed luminaires - wall washer optic B003 18 W TC-D 50 IP67 IK10

5000 Kg 7& ' * G

ƒ

ƒ

D

(P

/X[

ƒ

P

ƒ

ƒ

,PD[ FG .OP & J ƒ ƒ

+,7 &'0 7 *

334

ƒ

D

Data refers to fixtures placed at 0,5 m from the wall

ƒ ƒ ƒ

/X[

ƒ

P

:

Data refers to fixtures placed at 0,5 m from the wall

* Complete with electronic control gear

ƒ

+,7 &'0 7& * D ƒ ƒ

/X[

:

ƒ ƒ ƒ

,PD[ FG .OP & J ƒ

Medium-sized low circular recessed luminaires - wall washer optic B005* 20 W HIT (CDM-TC) 55 B007 35 W HIT 75 5000 Kg

G

:

IP67 IK10

& J ƒ ƒ

K

P

Data refers to fixtures placed at 1 m from the wall

Light Up Walk professional design Jean Michel Wilmotte

RECESSED FITTINGS FOR DRIVEWAYS

iGuzzini

13

The maximum temperatures were measured at a voltage of 1.06xVn (nominal voltage) at a room temperature of 25°C, in conformity with the European EN60598-1 standard and more specific regulations lamp

t °C ,PD[ FG .OP

Medium-sized high circular recessed luminaires - adjustable spot optic 0°-25° B009 35 W HIT 60 B012 70 W HIT 80 IP67 IK10

5000 Kg

/X[ .OP

ƒ

:

ƒ

ƒ

ƒ

+,7 &'0 7 * D ƒ

,PD[ FG .OP

ƒ

ƒ

ƒ

+,7 &'0 7 * D ƒ

,PD[ FG .OP

Medium-sized high circular recessed luminaires - adjustable optic 0°-25° B010 26 W TC-TEL 65 32 W TC-TEL 42 W TC-TEL IP67 IK10

5000 Kg

ƒ

ƒ

(P

(PD[

ø 312

ø 188

K

G

(P

(PD[

K

G

(P

(PD[

/X[ .OP ƒ

:

G

/X[ .OP

ƒ

:

K

313

code

ƒ

7& 7(/ *; T D ƒ

Complete with electronic control gear

,PD[ FG

Medium-sized high circular recessed luminaires - adjustable spot optic 0°-25° B011 35 W HI PAR 20 70 B013 50 W PAR 20 65

/X[ ƒ

ƒ

IP67 IK10

5000 Kg

: +, 3$5 (

ƒ

D

ƒ

ƒ

,PD[ FG

ƒ :

ƒ

D

ƒ

G

(P

(PD[

/X[ ƒ

3$5 (

K

ƒ

K

G

(P

(PD[

Measurements of the outer frames are shown in the table on page 328.

accessories and installation systems code

code

Refractor for elliptical distribution of the light flow B922 for B004-B006-B008-B009-B010 B011-B012-B013

Casing B901 for B003-B004-B005-B006-B007-B008 Available in colour 04

Available in colour 24 Coloured filters B918

Casing B902 for B009-B010-B011-B012-B013

Available in colours 05-06-09-65 Available in colour 04

Suction cup B916

Cover plate for round outer casing B910 for B901-B902

Available in colour 00 Available in colour 00

335

Light Up Walk professional design Jean Michel Wilmotte

RECESSED FITTINGS FOR DRIVEWAYS

iGuzzini

13

The maximum temperatures were measured at a voltage of 1.06xVn (nominal voltage) at a room temperature of 25°C, in conformity with the European EN60598-1 standard and more specific regulations lamp

t °C

Large low circular recessed luminaires - symmetrical optic B015 26 W TC-D B017* 26 W TC-TEL 32 W TC-TEL 42 W TC-TEL B019 57 W TC-TEL IP67 IK10

,PD[ FG .OP & J ƒ /X[ .OP ƒ

40 45 :

55

7& ' * G

ƒ

ƒ

D

ƒ ƒ ƒ

K

G

G (P (PD[

ø 410 124

code

ø 382

,PD[ FG .OP & J ƒ /X[ .OP

5000 Kg

ƒ

* Complete with electronic control gear :

ƒ

ƒ

ƒ

7& 7(/ *; T D ƒ ƒ

K

G

G (P (PD[

,PD[ FG .OP & J ƒ /X[ .OP ƒ

:

ƒ

ƒ

ƒ

7& 7(/ *; T D ƒ ƒ

Large low circular recessed luminaires - symmetrical optic B021 70 W HIT-DE 70 W HST-DE IP67 IK10

,PD[ FG .OP

95

5000 Kg

+,7 '( 5[ V

Large low circular recessed luminaires - wall washer optic B014 26 W TC-D B016* 26 W TC-TEL 32 W TC-TEL 42 W TC-TEL B018* 57 W TC-TEL IP67 IK10

ƒ

ƒ

D

ƒ

ƒ

,PD[ FG .OP

& J ƒ ƒ

45 50

7& ' * G

ƒ

ƒ

D

K

G

(P

(PD[

/X[

& J ƒ ƒ

* Complete with electronic control gear ƒ

ƒ

ƒ

ƒ

ƒ

5000 Kg

336

& J ƒ ƒ

85

ƒ

ƒ

Data refers to fixtures placed at 1 m from the wall

Data refers to fixtures placed at 1 m from the wall

/X[

Data refers to fixtures placed at 1 m from the wall

ƒ ƒ ƒ

P

D

/X[

,PD[ FG .OP

+,7 '( 5[ V

ƒ

7& 7(/ *; T D ƒ ƒ

IP67 IK10

P

:

/X[

,PD[ FG .OP & J ƒ

Large low circular recessed luminaires - wall washer optic B020 70 W HIT-DE 70 W HST-DE

ƒ

7& 7(/ *; T D ƒ ƒ

:

P

:

ƒ ƒ ƒ

,PD[ FG .OP

5000 Kg

G (P (PD[

:

60

G

/X[ .OP

ƒ

:

K

P

Data refers to fixtures placed at 1 m from the wall

Light Up Walk professional design Jean Michel Wilmotte

RECESSED FITTINGS FOR DRIVEWAYS

iGuzzini

13

The maximum temperatures were measured at a voltage of 1.06xVn (nominal voltage) at a room temperature of 25°C, in conformity with the European EN60598-1 standard and more specific regulations t °C

:

IP67 IK10

5000 Kg

/X[ .OP

ƒ

+,7 *

ƒ

ƒ

D

ƒ

ƒ

,PD[ FG .OP

+,7 *

ƒ

ƒ

D

ƒ

ƒ

,PD[ FG .OP

ƒ

ƒ ƒ

+67 3*

ƒ

ƒ

:

5000 Kg

(PD[

K

G

(P

(PD[

K

G

(P

(PD[

,PD[ FG .OP & J ƒ /X[ .OP

Large high circular recessed luminaires - adjustable optic 0°-25° B025 150 W HIT 75 B026 70 W HST 70 70 W HIT (CDO-TT) IP67 IK10

D

(P

+,7 *

ƒ

ƒ

D

ƒ

ƒ

,PD[ FG .OP

+67 (

ƒ

ƒ

D

ƒ

ƒ

ø 255

K

G

G (P (PD[

ø 410

ø 255

260

/X[ .OP

ƒ

:

ø 410

/X[ .OP

ƒ

:

G

/X[ .OP

ƒ

:

K

316

,PD[ FG .OP

316

lamp

Large high circular recessed luminaires - adjustable spot optic 0°-25° B022 70 W HIT 70 B023 150 W HIT 130 B024 100 W HST (SDW-T) 75

137

code

K

G

(P

(PD[

Measurements of the outer frames are shown in the table on page 328

accessories and installation systems code

code

Refractor for elliptical distribution of the light flow B923 for B022-B024-B025-B026

Casing B903 for B014-B015-B016-B017-B018 B019-B020-B021

Available in colour 24

Available in colour 04

Coloured filters B919 for B014-B015-B016-B017-B018-B019 B020-B021-B022-B024-B025-B026

Casing B904 for B022-B023-B024 Available in colour 04

Available in colours 05-06-09-65 Suction cup B916

Casing B905 for B025-B026

Available in colour 00 Available in colour 04

Cover plate for round outer casing B911 for B903-B904-B905 Available in colour 00

337

Light Up Walk professional design Jean Michel Wilmotte

RECESSED FITTINGS FOR DRIVEWAYS

iGuzzini

13

The maximum temperatures were measured at a voltage of 1.06xVn (nominal voltage) at a room temperature of 25°C, in conformity with the European EN60598-1 standard and more specific regulations lamp

t °C ,PD[ FG .OP & J ƒ /X[ .OP

Small square recessed luminaires complete with transformer - symmetrical optic B255 10 W QT9/Xelogen 70 IP67 IK10

ƒ

5000 Kg : 47 *

ƒ ƒ ƒ

G (P (PD[

& J ƒ

47 *

ƒ

ƒ

D

ƒ ƒ

45 &%& *8 D ƒ

,PD[ FG

ƒ :

P

Data refers to fixtures placed at 0,5 m from the wall

K

G

(P

(PD[

K

G

(P

(PD[

/X[ ƒ

45 &%& *8 D ƒ

/X[

ƒ :

ƒ

ƒ

5000 Kg

ƒ

,PD[ FG

Small square recessed luminaires adjustable optic ¹12° B256 20 W 12 V QR CBC 35 70

130

/X[

5000 Kg

Transformer to be ordered separately

D

G

ƒ

:

IP67 IK10

ƒ

,PD[ FG .OP

Small square recessed luminaires complete with transformer - wall washer optic B254 10 W QT9/Xelogen 70 IP67 IK10

ƒ

K

117

code

ƒ ƒ

Measurements of the outer frames are shown in the table on page 329

accessories and installation systems code

code

Coloured filters B965

Cover plate B964 for B962-B963

Available in colours 05-06-09-65 Available in colour 00

Outer casing housing connector box B963

Suction cup B916 Available in colour 00

Available in colour 04

Casing B962 Available in colour 04

Connector block with electronic transformer 60W 12V B914 for B256 Connector block without transformer B915 for B254-B255 1m

338

IP68

Light Up Walk professional design Jean Michel Wilmotte

RECESSED FITTINGS FOR DRIVEWAYS

iGuzzini

13

The maximum temperatures were measured at a voltage of 1.06xVn (nominal voltage) at a room temperature of 25°C, in conformity with the European EN60598-1 standard and more specific regulations lamp

t °C

Medium-sized square recessed luminaires - wall washer optic B027 70 W HIT-DE HST-DE IP67 IK10

,PD[ FG .OP

70

/X[

: +,7 '( 5[ V

ƒ

ƒ

346

D

ƒ ƒ

& J ƒ

55

P

7& 7(/ *; T D ƒ ƒ

ƒ

220

Data refers to fixtures placed at 1 m from the wall

ƒ

/X[

ƒ

ƒ

5000 Kg

ƒ

,PD[ FG .OP

:

IP67 IK10

5000 Kg

Medium-sized square recessed luminaires - wall washer optic B028 26 W TC-TEL 32 W TC-TEL 42 W TC-TEL

& J ƒ ƒ

240

code

P

Data refers to fixtures placed at 1 m from the wall

Complete with electronic control gear

Measurements of the outer frames are shown in the table on page 329

accessories and installation systems code

code

Coloured filters B920

Casing B906 for B027-B028

Available in colours 05-06-09-65 Available in colour 04

Suction cup B916

Cover plate for outer casing B912 for B906

Available in colour 00 Available in colour 00

339

Light Up Walk professional design Jean Michel Wilmotte

RECESSED FITTINGS FOR DRIVEWAYS

iGuzzini

13

The maximum temperatures were measured at a voltage of 1.06xVn (nominal voltage) at a room temperature of 25°C, in conformity with the European EN60598-1 standard and more specific regulations t °C

IP67 IK10

50

5000 Kg

Complete with electronic control gear

/X[

ƒ

& J ƒ ƒ

ƒ

ƒ

D

319

Data refers to fixtures placed at 1 m from the wall

/X[

ƒ

ƒ ƒ

,PD[ FG .OP

Large square recessed luminaires wall washer optic B031 250 W HIT-DE 90

P

:

444

ƒ

,PD[ FG .OP

+,7 '( 5[ V

IP67 IK10

ƒ

7& 7(/ *; T D ƒ ƒ

Large square recessed luminaires wall washer optic B029 150 W HIT-DE 75 HST-DE 5000 Kg

:

IP67 IK10

& J ƒ ƒ

236

,PD[ FG .OP

P

Data refers to fixtures placed at 1 m from the wall

/X[

& J ƒ

444

ƒ

5000 Kg : +,7 '( )F

ƒ

ƒ

D

ƒ ƒ ƒ

319

P

310 361

Data refers to fixtures placed at 1 m from the wall

Measurements of the outer frames are shown in the table on page 329

accessories and installation systems code

code

Coloured filters B921

Casing B907 for B029-B030

Available in colours 05-06-09-65 Available in colour 04

Suction cup B916

Casing B908 for B031

Available in colour 00 Available in colour 04

Cover plate for outer casing B913 for B907-B908 Available in colour 00

340

236

lamp

137

code

Large square recessed luminaires - wall washer optic B030 57 W TC-TEL

Light Up Walk professional design Jean Michel Wilmotte

RECESSED FITTINGS FOR DRIVEWAYS

iGuzzini

• Cast aluminium installation box can be ordered separately. • Multiplexing interconnection box where the cables can be connected in series. • 6 pole terminal block and double M24x1,5 cable clamp twin terminals and PG11 for the small model). • Power supply with a non-explosive power factor correction capacitor, ballast and starter. • All screws are A2 stainless steel. • The technical characteristics of the fitting comply with EN60598-1 standard. • IP67 IK10 • F seal • IMQ approval • Class of Insulation II

Simulation

• Ground-recessed fitting, for use with halogen, XELOGEN and LED lamps. • Fittings installed as recessed luminaires. • Light Up Walk has a body, chassis and exterior bezel (with two or three elements). • Cast aluminium structure; stainless steel AISI 304 bezel; tempered sealing glass; silicone water tight gasket; antiglare screens designed for vision comfort. Nickel-plated brass M15x1 cable clamp (M11x1 for the small round model) for the connection between the lower compartment and the upper compartment. Load-bearing capability up to 5000 Kg. Maximum external glass temperature rated up to 75° C (except as otherwise specifically indicated). Positioning and anchoring of the compartment relative to the chassis ensured by the blocking system.

Connector block

Pictograms

341

Light Up Walk professional design Jean Michel Wilmotte

iGuzzini

commercial order

Stainless steel AISI 304 bezel

Two-element frame - small body

Three-element frame - small body

Two-element outer casing - small body

Three-element outer casing small body

Small circular recessed luminaires

Small circular recessed luminaires with LED

Cast aluminium installation box

Round recessed luminaires

To obtain the desired multiple-shape Light Up walk professional, the order must be divided according to the elements that make it up: frame, luminaries, outer casing.

A drainage channel needs to be made under the counterframe before installation.

+

frame

frame

+

casing

code colour

luminaires

code colour

casing

luminaires

code colour

lamp

333

floor

B205

270 drainage pipe

1 W LED cool white

B191

04

10 W QT9/Xelogen (symmetrical optic)

B192

04

10 W QT9/Xelogen (wall-washer optic)

B193

04

20 W QR CBC 35 (adjustable optic spot)

04

B947 140

130

B206

410 522

342

04

396

13 326

gravel layer for drainage or concrete

B187 B946

140

130

ground or concrete

Light Up Walk professional design Jean Michel Wilmotte

RECESSED FITTINGS FOR DRIVEWAYS

iGuzzini

accessories and installation systems code

code

Coloured filters B917 for B191-B192-B193

Small-body two-element outer casing B946

Available in colours 05-06-09-65

Available in colour 04

Coloured filters for the version with cool white LED B950 for B187

Small-body three-element outer casing B947 Available in colour 04

Available in colours 02-06-26-D7 Bar pictogram B951 for B187

End cap for small-body two-element outer casing B959 for B946

Available in colour 00 Available in colour 00 Restaurant pictogram B952 for B187

End cap for small-body three-element outer casing B960 for B947

Available in colour 00 Available in colour 00 Information pictogram B953 for B187

Suction cup B916 Available in colour 00

Available in colour 00

Arrow/Direction pictogram B954 for B187 Available in colour 00

Toilet pictogram B955 for B187 Available in colour 00

Connector block with electronic transformer 60W 12V B914* for B256 Connector block without transformer B915 for B254-B255-B257-B258-B259-B260 1m

IP68

Available in colour 04 * This accessory enables up to 3 luminaires to be powered

343

Light Up light is a synthesis of the technological evolution applied to multiple project solutions. The adjustable optics and garden or floor application make Light Up light the ideal solution to create a good lighting direction. The introduction of the LED technology enriches the collection with

344

Light up light LED, which takes advantage of the RGB LED features and warm and neutral white colour temperatures. This recessed luminaire efficaciously exalts details and small elements, while adding colour to the projection of light and shadow: nature becomes scenography.

Light Up light design Jean Michel Wilmotte

LED version

RGB version

iGuzzini

Light management systems

Garden application

Floor application

Visual comfort

Static load bearing strength: 3500 Kg

345

Light Up light design Jean Michel Wilmotte

iGuzzini

A large range of fixed and adjustable optics combined with last-generation lamps permit an endless number of project solutions in the most diverse urban and residential settings.

Adjustable symmetrical Spot optic Light offers the user new alternatives in a multitude of up-lighting applications, where formal lines and low intrusiveness are key elements in a lighting project.

HIT 35 W (B620) L

α B L C E C1 E1 C2 E2 C0 E0

C C1 C2 Co B

Fixed Flood symmetric optic Low surface temperature (75°C) and reduced height allow Light Up to use 35W halide lamps. This is an excellent solution for parks and high-traffic pedestrian spaces that also need visual comfort

0° 0,3 1,2 6 9 3 25 1,5 45 0,5 15

(m) (m) (m) lux (m) lux (m) lux (m) lux

7° 0,6 1,5 6 36 3 90 1,5 25 0,5 <10

HIT 35 W (B621)

L1

ill. ab. L1xL2

Emax

Emed

3m

3x3m

70 lux

32 lux

4m

4x4m

38 lux

18 lux

5m

5x5m

25 lux

13 lux

h L2

h

Adjustable symmetrical Flood optic The versatility of the asymmetric and adjustable optic allows us to have uniform lighting for plants, hedges, bushes, etc., eliminating glare in the direction of pedestrian walkways nearby.

orientation 3° 0,3 1,3 6 20 3 75 1,5 95 0,5 20

TC-D 18 W (B619) L2

L1

B

α

ill. ab. L1xL2

0,5m

0°

3x2m

26 lux

19 lux

0,5m

5°

3x2m

33 lux

12 lux

0,5m

10°

3x2m

42 lux

14 lux

Emax

Emed

B

Fixed Wall-washer optic The innovative wall washer optic guarantees high levels of uniformity on large walls. the product can be installed both in paved walkways as well as rugged soil (soil that is regularly fertilized, for example) because it has a thermoplastic outer casing.

HIT 70 W (B625)

C Co B A

A = distance between luminaires B = distance from the wall C = height of the illuminated area C0 = lower limit of the area Emed = average lighting in the area Emax = imax lighting in the area g1 = illuminance uniformity

346

L = beam width α = orientation of the projector with respect to the vertical plane E = illuminance at height C E1 = illuminance at height C1 E2 = illuminance at height C2 E0 = illuminance at height C0

A (m)

2

3

4

B (m)

0,5

1

1,5

C (m)

2,5

4

6,5

C0 (m)

0,5

0,5

1

Emed lux

210

84

40

g1

0,2

0,2

0,2

Light Up light design Jean Michel Wilmotte

iGuzzini

The special double-adjustable optic further increases the excellent performance of Light Up light. The possibility to adjust the luminous flow by tilting and directing the two sections of the optical assembly allows for optimal customisation Spot optic (S) α=10° double-adjustable The very uniform emission given by the planar position of the optical assembly is the ideal solution to illuminate very tall trees, such as cypresses.

of the lighting direction. Ideal to provide a flexible answer to the lighting requirements of green spaces, these ground recessed luminaires can be efficaciously used to illuminate trees and shrubs in parks and gardens. LED 12x1W (BB38) h

ill. ab. L1xL2

Emax

Emed

16 m

3m

40 lux

30 lux

24 m

4m

20 lux

14 lux

32 m

6m

10 lux

8 lux

h

ill. ab. L1xL2

FLAT

Spot optic (S) α=20° double-adjustable By orientating a single section of the optical assembly, the luminaire is best used to illuminate plants with both vertical and horizontal development.

LED 12x1W (BB38) Emax

Emed

8m

3m

85 lux

60 lux

16 m

6m

20 lux

15 lux

24 m

9m

10 lux

7 lux

h

ill. ab. L1xL2

Emax

Emed

4m

1m

500 lux

150 lux

8m

1,5 m

130 lux

40 lux

12 m

2m

60 lux

18 lux

h

ill. ab. L1xL2

Emax

4m

3m

250 lux

85 lux

8m

6m

60 lux

20 lux

12 m

10 m

30 lux

10 lux

SEMIFLAT

Spot optic (S) α=10° double-adjustable The two sections of the optical assembly are oriented in the same oblique direction to underscore specific details of hedges and shrubs.

LED 12x1W (BB38)

OBLIQUE

Spot optic (S) α=40° double-adjustable The light cones is transformed when adjusting the sections of the optical assembly in opposite directions. Ideal to illuminate trees and plants with large crowns and structures.

LED 12x1W (BB38) Emed

DIVERGENT

347

Light Up light design Jean Michel Wilmotte

iGuzzini ERG

Y

E

N

Versions with adjustable optics

Low height

Double-adjustability for LED versions

348

V I N

Direct dim (for RGB versions)

• Light fitting for installation into the ground, for use with halogen (QR111), metal halide, fluorescent lamps, monochromatic and RGB LEDs. • Recessed installation into pavements and soil. • Circular body, outer casing,and frame • Aluminium alloy body, AISI 304 stainless steel frame; tempered glass for closure, water-tight silicone gasket, anti-glare screen for visual comfort, M15x1nickel-plated brass cable gland for connection between lower and upper compartments; positioning and anchoring of the compartment to the outer casing via 2 M6x25 UNI 5931 stainless steel screws. • Decompression box for cascade cables; 6 pole terminal block and double M24x1,5 cable gland made of stainless steel for pass-through cables; power supply with a nonexplosive power factor correction capacitor, ballast (for fluorescent version), automatic starter (HIT version), and electronic transformer (QR-111 version). • For installation, fitting has an outer casing made of black thermoplastic reinforced polypropylene (which can be ordered separately). Load resistance up to 3,500 Kg.

200

Decompression box

G

S

A

RECESSED FITTINGS FOR PEDESTRIAN AREAS PROFESSIONAL FITTINGS WITH DYNAMIC COLOUR CHANGES

Double PG Cascade connection

Device to avoid undesired luminous effects

• QR-111 version with mechanical system to clean the light beam . • D=312mm monochromatic LED version with 12-LED circuit, orientable optics with plastic lenses, and equipped with electronic power supply. Ready for pass-through wiring. • D=312mm RGB LED version with 12-LED multicolour circuit, DALI 48÷56Vdc electronic control card, electronic power supply (ordered separately), orientable optics with plastic lenses, and single entrance for power cable. Single entrance for power supply cable and DALI control cable. • DALI RGB LED versions are provided with RGB DIRECT DIM for dimming with standard button with the following functions: Soft ON/OFF, colour change, last colour memory, default dynamic sequence. • Adjustable optics (except where specified • All screws are A2 stainless steel • The technical characteristics of the fitting comply with EN60598-1 standard. • IP67 IK10 • F seal • IMQ approval • Class of Insulation I/II

Light Up light LED design Jean Michel Wilmotte

RECESSED FITTINGS FOR PEDESTRIAN AREAS PROFESSIONAL FITTINGS WITH DYNAMIC COLOUR CHANGES

iGuzzini

13

lamp

t °C

Circular LED recessed luminaire adjustable spot optic ¹15° BB38 12x1 W neutral white BB39 12x1 W warm white Circular LED recessed luminaire adjustable flood optic ¹15° BB40 12x1 W neutral white BB41 12x1 W warm white

,PD[ FG

40 40 ƒ

[ : 1HXWUDO

40 40

/('

D

ƒ

ƒ

,PD[ FG

ƒ

[ : 1HXWUDO

D

ƒ

Complete with lamp and electronic DALI control card. Power supply to be ordered separately. Occupies 3 DALI addresses

ƒ

/('

D

G

(P

(PD[

ø 312

ø 211

K

G

(P

(PD[

K

G

(P

(PD[

Transmission coefficient (K)

/X[ ƒ

: /(' 5*%

3500 Kg

ƒ

ƒ

,PD[ FG

Circular LED recessed luminaire with change RGB dynamic colour DALI - adjustable flood optic ¹15° BB42 24 W max 12 LED 48á56Vdc 40 IP67 IK10

ƒ

/('

K

/X[ ƒ

3500 Kg

Complete with lamp and electronic power supply

Block diagram of Colour Quick system

ƒ

Neutral white = 4200K Warm white = 3100K IP67 IK10

/X[ ƒ

124

code

ƒ

ƒ

Colour

K

White 6000K Cyan Orange Magenta Yellow Green Red Blue

1 0.44 1,12 0,72 1,22 1,11 1,22 0,18

Data refers to 6000K white light

Remote units

Main unit

Components

Luminaires

Colour Quick

Electronic power supply designed to mount on a DIN standard profile 220á240V 24Vdc

Light Up light LED RGB is also compatible with other light control systems of the iGuzzini range illustrated in this catalogue.

code 9730 available in colours 01 and 15

code 9908 max 64 (DALI loads) For the system definition, refer to the instructions

Remote control

Light Up light LED RGB (1 load/3 addresses DALI)

code 9731 available in colour 01