International Journal for Research in Applied Science & Engineering Technology (IJRASET)

ISSN: 2321-9653; IC Value: 45.98; SJ Impact Factor: 7.538

Volume 11 Issue IV Apr 2023- Available at www.ijraset.com combination with flax, hemp and glass fibres manufactured by vacuum infusion,” Mater Des, vol. 49, pp. 728–735, 2013, doi: 10.1016/j.matdes.2013.02.014.

[69] F. Sarasini et al., “Drop-weight impact behaviour of woven hybrid basalt-carbon/epoxy composites,” Compos B Eng, vol. 59, pp. 204–220, Mar. 2014, doi: 10.1016/j.compositesb.2013.12.006.

[70] S. Kucieland P. Romańska,“Hybrid composites ofpolylactide withbasalt and carbon fibersand theirthermaltreatment,” Materials, vol. 12, no. 1, Dec. 2018, doi: 10.3390/ma12010095.

[71] M. Bulut, “Mechanical characterization of Basalt/epoxy composite laminates containing graphene nanopellets,” Compos B Eng, vol. 122, pp. 71–78, Aug. 2017, doi: 10.1016/j.compositesb.2017.04.013.

[72] T. Scalici, G. Pitarresi, D. Badagliacco, V. Fiore, and A. Valenza, “Mechanical properties of basalt fiber reinforced composites manufactured with different vacuumassisted impregnation techniques,” Compos B Eng, vol. 104, pp. 35–43, Nov. 2016, doi: 10.1016/j.compositesb.2016.08.021.

[73] M. Bulut, “Mechanical characterization of Basalt/epoxy composite laminates containing graphene nanopellets,” Compos B Eng, vol. 122, pp. 71–78, Aug. 2017, doi: 10.1016/j.compositesb.2017.04.013.

[74] S. Sfarra et al., “Falling weight impacted glass and basalt fibre woven composites inspected using non-destructive techniques,” Compos B Eng, vol. 45, no. 1, pp. 601–608, Feb. 2013, doi:10.1016/j.compositesb.2012.09.078.

[75] F. A. Shishevan, H. Akbulut, and M. A. Mohtadi-Bonab, “Low Velocity Impact Behavior of Basalt Fiber-Reinforced Polymer Composites,” J Mater Eng Perform, vol. 26, no. 6, pp. 2890–2900, Jun. 2017, doi:10.1007/s11665-017-2728-1.

[76] H. dong Fu, X. ya Feng, J. xu Liu, Z. ming Yang, C. He, and S. kui Li, “An investigation on anti-impact and penetration performance of basalt fiber composites with different weave and lay-up modes,” Defence Technology, vol. 16, no. 4, pp. 787–801, Aug. 2020, doi: 10.1016/j.dt.2019.09.005.

[77] V. Sánchez-Gálvez, R. Sancho, F. Gálvez, D. Cendón, and V. Rey-de-Pedraza, “High speed impact performance of basalt fiber reinforced vinylester composites at room and low temperatures,” International Journal of Lightweight Materials and Manufacture, vol. 3, no. 4, pp. 416–425, Dec. 2020, doi: 10.1016/j.ijlmm.2020.05.006.

[78] H. N. Dhakal, E. le Méner, M. Feldner, C. Jiang, and Z. Zhang, “Falling weight impact damage characterisation of flax and flax basalt vinyl ester hybrid composites,” Polymers (Basel), vol. 12, no. 4, Apr. 2020, doi: 10.3390/POLYM12040806.

[79] B. Zuccarello, F. Bongiorno, and C. Militello, “Basalt Fiber Hybridization Effects on High-Performance Sisal-Reinforced Biocomposites,” Polymers (Basel), vol. 14, no. 7, Apr. 2022, doi:10.3390/polym14071457.

[80] A. Saleem, L. Medina, and M. Skrifvars, “Mechanical performance of hybrid bast and basalt fibers reinforced polymer composites,” Journal of Polymer Research, vol. 27, no. 3, Mar. 2020, doi:10.1007/s10965-020-2028-6.

[81] P. de La Rosa García, A. C. Escamilla, and M. Nieves González García, “Bending reinforcement of timber beams with composite carbon fiber and basalt fiber materials,” Compos B Eng, vol. 55, pp. 528–536, 2013, doi: 10.1016/j.compositesb.2013.07.016.

[82] P. Davies and W. Verbouwe, “Evaluation of Basalt Fibre Composites for Marine Applications,” Applied Composite Materials, vol. 25, no. 2, pp. 299– 308, Apr. 2018, doi:10.1007/s10443-017-9619-3.

[83] I. M. de Rosa et al., “Post-impact mechanical characterisation of glass and basalt woven fabric laminates,” Applied Composite Materials, vol. 19, no. 3–4, pp. 475–490, Jun. 2012, doi: 10.1007/s10443-011-9209-8.

[84] R. K. Gideon, H. Hu, P. Wambua, and B. Gu, “Characterizations of basalt unsaturated polyester laminates under static three-point bending and low-velocity impact loadings,” Polym Compos, vol. 35, no. 11, pp. 2203–2213, Nov. 2014, doi: 10.1002/pc.22885.

[85] I. Martin, D. Saenz Del Castillo, A. Fernandez, and A. Güemes, “Advanced thermoplastic composite manufacturing by in-situ consolidation:A review,” Journal of Composites Science, vol. 4, no. 4. MDPI AG, 2020. doi: 10.3390/jcs4040149.

[86] U. K. Vaidya and K. K. Chawla, “Processing of fibre reinforced thermoplastic composites,” International Materials Reviews, vol. 53, no. 4. pp. 185– 218, Jul. 2008. doi: 10.1179/174328008X325223.

[87] J. P. Reis, M. de Moura, and S. Samborski, “Thermoplastic composites and their promising applications in joining and repair composites structures: A review,” Materials, vol. 13, no. 24. MDPI AG, pp. 1–33, Dec. 02, 2020. doi: 10.3390/ma13245832.

[88] A. Kufel, S. Para, and S. Kuciel, “Basalt/glass fiber polypropylene hybrid composites: Mechanical properties at different temperatures and under cyclic loading and micromechanical modelling,” Materials, vol. 14, no. 19, Oct. 2021, doi: 10.3390/ma14195574.

[89] A. Akinci and A. Akinci, “Mechanical and morphological properties of basalt filled polymer matrix composites,” 2009. [Online]. Available: https://www.researchgate.net/publication/40804756

[90] A. Akinci, S. Yilmaz, and U. Sen, “Wear behavior of basalt filled low density polyethylene composites,” Applied Composite Materials, vol. 19, no. 3–4, pp. 499–511, Jun. 2012, doi: 10.1007/s10443-011-9208-9.

[91] X. Zhang, X. Pei, and Q. Wang, “Friction and wear properties of basalt fiber reinforced/ solid lubricants filled polyimide composites under different sliding conditions,” J Appl Polym Sci, vol. 114, no. 3, pp. 1746–1752, Nov. 2009, doi: 10.1002/app.30517.

[92] L. Mészáros, T. Deák, G. Balogh, T. Czvikovszky, and T. Czigány, “Preparation and mechanical properties of injection moulded polyamide 6 matrix hybrid nanocomposite,” Compos Sci Technol, vol. 75, pp. 22–27, Feb. 2013, doi:10.1016/j.compscitech.2012.11.013.

[93] X. Deng, M. S. Hoo, Y. W. Cheah, and L. Q. N. Tran, “Processing and Mechanical Properties of Basalt Fibre-Reinforced Thermoplastic Composites,” Polymers (Basel), vol. 14, no. 6, Mar. 2022, doi: 10.3390/polym14061220.

[94] I. M. Daniel and Ori. Ishai, Engineering mechanics of composite materials. Oxford University Press,2006.

[95] C. S. Lopes, C. González, O. Falcó, F. Naya, J. LLorca, and B. Tijs, “Multiscale virtual testing: the roadmap to efficient design of composites for damage resistance and tolerance,” CEAS Aeronaut J, vol. 7, no. 4, pp. 607–619, Dec. 2016, doi: 10.1007/s13272-016-0210-7.

[96] F. O. Aguele, C. I. Madufor, and K. F. Adekunle, “Comparative Study of Physical Properties of Polymer Composites Reinforced with Uncarbonised and Carbonised Coir,” Open Journal of Polymer Chemistry, vol. 04, no. 03, pp. 73–82, 2014, doi: 10.4236/ojpchem.2014.43009.

[97] D. J. Mortell, D. A. Tanner, and C. T. McCarthy, “An experimental investigation into multi-scale damage progression in laminated composites in bending,” Compos Struct, vol. 149, pp. 33–40, Aug. 2016, doi: 10.1016/j.compstruct.2016.03.054.

[98] Y. Swolfs, R. M. McMeeking, I. Verpoest, and L. Gorbatikh, “Matrix cracks around fibre breaks and their effect on stress redistribution and failure development in unidirectional composites,” Compos Sci Technol, vol. 108, pp. 16–22, Feb. 2015, doi: 10.1016/j.compscitech.2015.01.002.

[99] A. Arteiro, G. Catalanotti, A. R. Melro, P. Linde, and P. P. Camanho, “Micro-mechanical analysis of the in situ effect in polymer composite laminates,”