Ikon Catalogue by ikonnz

Sinks and appliances 23/24 Collection

100%

New Zealand Owned and Operated ww w.ikon.nz | 0800 83 83 84

Inspiring sinks and appliances Ikon is a New Zealand owned and operated leading supplier of inspirational sinks and appliances. Our goal is to provide innovative and solution based products that solve typical kitchen design struggles.

Cronin Kitchens | Auckland

Our Products

Tapware

Sinks

Ventilation

Cooking Appliances

ww w.ikon.nz | 0800 83 83 84

Table of

Contents

CONTENTS 6

Our Instant hot water taps

Our Tapware

Our Sinks

Our Sink accessories

Our Handles

Our Ventilation

Our Ducting

Our Terms and conditions

Pull out | 11 Single lever | 12

ww w.ikon.nz | 0800 83 83 84

Our

Instant hot water taps Enjoy filtered boiling and cold water as well as ‘normal’ hot and cold water from the one tap.

Instant hot water tap: Siena ww w.ikon.nz | 0800 83 83 84

Our Instant hot water taps

ENJOY FILTERED COLD AND BOILING WATER PLUS ‘NORMAL’ HOT AND COLD WATER FROM THE ONE TAP. “It can be tea-time anytime. Ready whenever you are.”

SAVE TIME With hot water available instantly, gone are the days of having to wait for the kettle to boil. Not only does this mean you can enjoy your cup of tea straight away, but having instant boiling water when cooking meals gets dinner on the table faster. SAFE FOR THE FAMILY The child lock keeps small hands from accidentally turning on the instant hot water. ENERGY EFFICIENT The stand by power usage is less than a 40W light bulb, and the insulated hot water tank reduces heating time and conserves water. HYGIENIC, CLEAN WATER The filter removes scale, magnesium, lead, protozone cysts and organic compound from your boiling hot water. CONCEALED DESIGN The 1.9 litre tank (approx. 11 cups of water) is concealed in a compact under sink system, saving you precious cupboard space. Only takes 3 minutes to heat up and can provide up to 38 litres of boiling water per hour. QUICK INSTALLATION Our system can be installed wherever there is mains water access. The initial set up should be done by a qualified plumber, who should have the unit installed and ready to use in under an hour.

Our Tapware

Our Instant hot water taps SATURNIA

code IKHWT702-2 Brushed finish

304 stainless steel

200 400

Suitable for mains water pressure

268

Max flow: 3.8 litre/min (hot water)

Max pressure: 2.5 mpa (hot water)

Supplied with fiter and cylinder

Easy to change micro filter,

with up to 12 month life span (depending on water quality) 2 year warranty

Cylinder dimensions (mm): 225 (W) x 315 (H) x 200 (D) Filter dimensions (mm): 275 (H) x 60 (D)

SIENA

code IKHWT944-2 210

Brushed finish

Max flow: 3.8 litre/min (hot water)

256

304 stainless steel

341

Suitable for mains water pressure

Max pressure: 2.5 mpa (hot water)

Supplied with fiter and cylinder

Easy to change micro filter,

with up to 12 month life span (depending on water quality) 2 year warranty

Cylinder dimensions (mm): 225 (W) x 315 (H) x 200 (D) Filter dimensions (mm): 275 (H) x 60 (D)

ww w.ikon.nz | 0800 83 83 84

Our

Tapware

Tap: Audrey

Our Tapware | Pull out

code IK7001 B

Pull out kitchen mixer

• Dual function brass spray with water saving aerator • 180cm flexible hose • Spout swivels 360˚ • Mains pressure

• Brushed finish • Brass material • SUS body & alloy handle • Ø25 ceramic cartridge

463

LANA

257

• Brushed finish • Brass material • SUS body & alloy handle • Ø25 ceramic cartridge

• Dual function brass spray with water saving aerator • 180cm flexible hose • Spout swivels 360˚ • Mains pressure

220

476

Pull out kitchen mixer

code IKT7005 B

270

VIVIEN

233

code IKT92 B/C

Pull out kitchen mixer

• Ø35 ceramic cartridge • Dual function brass spray with water saving aerator • 180cm flexible hose • Mains pressure

• Brushed or Chrome finish • Brass material • Copper faucet body • Zinc alloy handle

280

HEDY

392

276

VERONICA

code IKT02 B/C

Pull out kitchen mixer

• Ø35 ceramic cartridge • Dual function brass spray with water saving aerator • 180cm flexible hose • Mains pressure

• Brushed or Chrome finish • Brass material • Copper faucet body • Zinc alloy handle

352 243

284

285

code IKT5598

Pull out kitchen mixer

• Ø35 ceramic cartridge • Water saving aerator • Two PCS G1/2” 60cm flexible hoses • Mains pressure

• Brass material • Copper faucet body • Zinc alloy handle

ww w.ikon.nz | 0800 83 83 84

232

549

BETTY

224

• Brushed or Chrome finish • Brass material • Copper faucet body • Zinc alloy handle • Ø35 ceramic cartridge

• Dual function brass spray with water saving aerator • 180cm flexible hose • Mains pressure

407

Pull out kitchen mixer

210

code IKT01 B/C

300

AUDREY

Our Tapware | Single lever 206

• Brushed or Chrome finish • Brass material

• Copper faucet body • Zinc alloy handle • Ø35 ceramic cartridge • Water saving aerator • Mains pressure

RITA

code IKT5701 B/C

Single lever kitchen mixer with rotary spout • Brushed or Chrome finish • Brass material

• • • • •

MARLENE

code IKT5301 B/C

Single lever kitchen mixer with rotary spout • Brushed or Chrome finish • Brass material

• • • • •

MAE

code IKT581 B/C

Single lever kitchen mixer with rotary spout • Brushed or Chrome finish • Brass material

• Copper faucet body • Zinc alloy handle • Ø35 ceramic cartridge • Water saving aerator • Mains pressure

GRETA

code IKT751 C

Single lever kitchen mixer with rotary spout

• Copper faucet body • Zinc alloy handle • Ø35 ceramic cartridge • Water saving aerator • Mains pressure

330

Copper faucet body Zinc alloy handle Ø35 ceramic cartridge Water saving aerator Mains pressure

220

259.2

Copper faucet body Zinc alloy handle Ø35 ceramic cartridge Water saving aerator Mains pressure

185

245

306

282

196

230.9

189.2 312.5

• Chrome finish • Brass material

185 286

Single lever kitchen mixer with rotary spout

289

code IKT513 B/C

367.8

ELIZABETH

You’ll find these taps to be ideal for your kitchen environment and a perfect match for most Ikon and Reginox sinks. Before purchasing an Ikon tap, please ensure you have a mains pressure system. To do this, check the label on your water cylinder or check with your plumber.

Our Tapware

Our

Sinks

Sink: Sulphur

Fyfe Kitchens | Auckland

ww w.ikon.nz | 0800 83 83 84

Single bowls • Sorted by cabinet size then main bowl width

• If you would like to match multiple bowls in the

(smallest to largest)

same project, we recommend purchasing bowls

• All bowls are either Ikon or Reginox brands

• Suggested cabinet size: • Internal dimensions (mm): • Internal radius (mm): • Bowl Depth (mm): • Stainless steel thickness/grade: • Mounting (refer to fabricator): • Other considerations: • Brand / Collection:

40cm 250 x 400 x 230 10 230 1.2mm / 304 Top, under or flush Handmade / Satin Ikon / Sink Stations

MURCHISON

code IK3300

GALLIUM • Suggested cabinet size: • Internal dimensions (mm): • Internal radius (mm): • Bowl Depth (mm): • Stainless steel thickness/grade: • Mounting (refer to fabricator): • Other considerations: • Brand / Collection:

40cm 300 x 400 x 220 15 220 1.2mm / 304 Top, under or flush Handmade / Brushed Ikon / Tasman

300 250

350 300

code IK73041 40cm 300 x 400 x 220 10 220 1.2mm / 304 Top, under or flush Handmade / Satin Ikon / Las Vegas

Our Sinks

Recommended accessories • Designer colander • Drainer • Insert bowl

480 430 400

code IK8250

Recommended accessories • Designer colander • Drainer

450 400

40cm 200 x 400 x 180 10 180 1.2mm / 304 Top, under or flush Handmade / Satin Ikon / Las Vegas

MINI SINK STATION

250 200

Recommended accessories • Designer colander • Drainer • Insert bowl • Roller mat • Sink protection grill

450 400

code IK72021

350 300

450 400

HYDOROGEN

from the same collection (See pages 36-43)

Recommended accessories • Designer colander • Drainer • Insert bowl • Sink protection grill

Our Sinks | Single bowls

LITHIUM • Suggested cabinet size: • Internal dimensions (mm): • Internal radius (mm): • Bowl Depth (mm): • Stainless steel thickness/grade: • Mounting (refer to fabricator): • Other considerations: • Brand / Collection:

AMSTERDAM 40 • Suggested cabinet size: • Internal dimensions (mm): • Internal radius (mm): • Bowl Depth (mm): • Stainless steel thickness/grade: • Mounting (refer to fabricator): • Other considerations: • • Brand / Collection:

510 458

code IK1403 45cm 340 x 400 x 200 25 200 1mm / 304 Top, under or flush Pressed / Polished Ikon / Northland

code IK74041 50cm 400 x 400 x 220 10 220 1.2mm / 304 Top, under or flush Handmade / Satin Ikon / Las Vegas

380 340

Recommended accessories • Designer colander • Drainer • Insert bowl • Sink protection grill

* Optional discounted roller mat 450 400

Recommended accessories • Designer colander • Drainer • Insert bowl • Roller mat • Sink protection grill • Designer stainer

code R34637 50cm 400 x 400 x 200 10 200 Granite Top, under or flush Two colour options

Recommended accessories • Drainer • Roller mat

440 400

DARGAVILLE

45cm 329 x 458 x 220 10 220 1.2mm / 304 Top, under or flush Handmade / Satin Ikon / Las Vegas

381 329

450 400

code IK71520

460 400

Recommended accessories • Drainer • Regi-Clean Oil • Waste cover

460 400

BRONZE

(Charcoal & Pure Black)

Reginox / Regi-Granite

R32312 (Charcoal)

ww w.ikon.nz | 0800 83 83 84

Our Sinks | Single bowls

www.ikon.nz Model:

Dimension:

code IK3400

code IK404025

50cm 400 x 400 x 250 25 250 1mm / 304 Top, under or flush Pressed / Satin Ikon / Marlborough

WELLSFORD • Suggested cabinet size: • Internal dimensions (mm): • Internal radius (mm): • Bowl Depth (mm): • Stainless steel thickness/grade: • Mounting (refer to fabricator): • Other considerations: • Brand / Collection:

450 400 450 400

*Individually handcrafted, dimensions may vary to the line drawing

code IK9555 50cm 400 x 400 x 220 10 220 Brass / 1.3mm Top, under or flush Handmade Ikon / Otago

code IK1404 50cm 400 x 400 x 200 25 200 1mm / 304 Top, under or flush Pressed / Polished Ikon / Northland

Recommended accessories

*These accessories are not available in copper

450 400

• Designer colander • Drainer • Sink protection grill • Insert bowl • Roller mat

Recommended accessories

*These accessories are not available in brass 450 400

MILTON

50cm 400 x 400 x 220 10 220 Copper / 1.3mm Top, under or flush Handmade Ikon / Otago

• Designer colander • Designer stainer • Sink protection grill • Insert bowl • Roller mat

450 400

*Individually handcrafted, dimensions may vary to the line drawing 440 400

440 400

Recommended accessories

450 400

code IK9551

Recommended accessories • Designer colander • Drainer • Insert bowl • Roller mat • Sink protection grill • Designer stainer

120

5 R1

50cm 400 x 400 x 220 15 220 1.2mm / 304 Top, under or flush Handmade / Brushed Ikon / Tasman

PICTON

RANFURLY

450 400

220

450 400

MOTUEKA

MOTUEKA IK3400

Code:

• Designer colander • Drainer • Sink protection grill • Insert bowl • Roller mat

Recommended accessories • Drainer colander • Sink protection grill • Drainer • Insert bowl • Roller mat

* Optional discounted roller mat

Our Sinks

Our Sinks | Single bowls code R28124

40X40 ARCTIC WHITE

code IK730001

50cm 403 x 403 x 180 25 180 1mm / 304 Top, under or flush Laser edge Reginox / Ohio

OSMIUM

code IK3450 55cm 450 x 400 x 220 15 220 1.2mm / 304 Top, under or flush Handmade / Brushed Ikon / Tasman

500 450

code IK74501

55cm 450 x 400 x 220 10 220 1.2mm / 304 Top, under or flush Handmade / Satin Ikon / Las Vegas

JUNIOR SINK STATION

code IK8450

55cm 450 x 400 x 230 10 230 1.2mm / 304 Top, under or flush Handmade / Satin Ikon / Sink stations

Recommended accessories • Drainer • Inox care • Waste cover

Recommended accessories • Designer colander • Designer strainer • Drainer • Sink protection grill • Insert bowl • Roller mat

450 400

440 403

500 450

Recommended accessories • Designer colander • Designer strainer • Drainer • Sink protection grill • Insert bowl • Roller mat

450 400

COLLINGWOOD

Recommended accessories • Drainer • Inox care • Waste cover

440 403

50cm 403 x 403 x 180 10 180 304 Top, under or flush Laser edge Reginox / New York

440 403

500 450

480 430 400

NEW YORK 40X40

Recommended accessories • Designer colander • Chopping board • Drainer • Sink protection grill • Insert bowl • Roller mat

* Comes with FREE chopping board and roller mat

ww w.ikon.nz | 0800 83 83 84

Our Sinks | Single bowls code IK454025

55cm 450 x 400 x 250 25 250 1mm / 304 Top, under or flush Pressed / Satin Ikon / Marlborough

KAMO • Suggested cabinet size: • Internal dimensions (mm): • Internal radius (mm): • Bowl Depth (mm): • Stainless steel thickness/grade: • Mounting (refer to fabricator): • Other considerations: • Brand / Collection:

ZINC • Suggested cabinet size: • Internal dimensions (mm): • Internal radius (mm): • Bowl Depth (mm): • Stainless steel thickness/grade: • Mounting (refer to fabricator): • Other considerations: • Brand / Collection:

500 450

450 400

*Individually handcrafted, dimensions may vary to the line drawing

500 450

code IK72015 60cm 458 x 329 x 220 10 220 1.2mm / 304 Top, under or flush Handmade / Satin Ikon / Las Vegas

• Designer colander • Drainer • Sink protection grill • Insert bowl • Roller mat

Recommended accessories

*These accessories are not available in brass

*Individually handcrafted, dimensions may vary to the line drawing

code IK1454 55cm 450 x 400 x 200 25 200 1mm / 304 Top, under or flush Pressed / Polished Ikon / Northland

Recommended accessories

*These accessories are not available in copper

code IK9556 55cm 450 x 400 x 220 10 220 Brass / 1.3mm Top, under or flush Handmade Ikon / Otago

• Designer colander • Designer strainer • Sink protection grill • Drainer • Insert bowl • Roller mat

450 400

LAWRENCE

55cm 450 x 400 x 220 10 220 Copper / 1.3mm Top, under or flush Handmade Ikon / Otago

Recommended accessories

490 450

• Designer colander • Drainer • Sink protection grill • Insert bowl • Roller mat

Recommended accessories • Drainer colander • Sink protection grill • Drainer • Insert bowl

440 400

code IK9552

* Optional discounted roller mat 510 458

Recommended accessories • Drainer • Roller mat

381 329

ROXBURGH

500 450

450 400

BLENHEIM

Our Sinks

Our Sinks | Single bowls code IK73712

AMSTERDAM 50

code R30844

RICHMOND • Suggested cabinet size: • Internal dimensions (mm): • Internal radius (mm): • Bowl Depth (mm): • Stainless steel thickness/grade: • Mounting (refer to fabricator): • Other considerations: • Brand / Collection:

• Drainer • Regi-Clean Oil • Waste cover

R34644 (White)

code IK75041 60cm 500 x 400 x 220 10 220 1.2mm / 304 Top, under or flush Handmade / Satin Ikon / Las Vegas

ANAKIWA

code IK504025

60cm 500 x 400 x 250 25 250 1mm / 304 Top, under or flush Pressed / Satin Ikon / Malborough

R30837 (Pure black) 550 500

code IK3500 60cm 500 x 400 x 220 15 220 1.2mm / 304 Top, under or flush Handmade / Brushed Ikon / Tasman

Recommended accessories

560 500

550 500

Recommended accessories • Designer colander • Designer strainer • Drainer • Sink protection grill • Insert bowl • Roller mat

550 500

ww w.ikon.nz | 0800 83 83 84

Recommended accessories • Designer colander • Designer strainer • Drainer • Sink protection grill • Insert bowl • Roller mat

450 400

SELENIUM

60cm 500 x 400 x 200 10 200 Granite Top, under or flush Three colour options Reginox / Regi-Granite

Three colour options: Charcoal

450 400

• Drainer colander • Designer strainer • Sink protection grill • Drainer • Insert bowl • Roller mat

510 400

60cm 465 x 400 x 220 10 220 1.2mm / 304 Top, under or flush Handmade / Satin Ikon / Las Vegas

Recommended accessories

460 400

525 465

450 400

KRYTON

Recommended accessories • Designer colander • Chopping board • Drainer • Sink protection grill • Insert bowl • Roller mat

Our Sinks | Single bowls

RUSSELL • Suggested cabinet size: • Internal dimensions (mm): • Internal radius (mm): • Bowl Depth (mm): • Stainless steel thickness/grade: • Mounting (refer to fabricator): • Other considerations: • Brand / Collection:

NEW YORK 50X40 • Suggested cabinet size: • Internal dimensions (mm): • Internal radius (mm): • Bowl Depth (mm): • Stainless steel thickness/grade: • Mounting (refer to fabricator): • Other considerations: • Brand / Collection:

60cm 500 x 400 x 220 10 220 Copper / 1.3mm Top, under or flush Handmade Ikon / Otago

code IK1540 60cm 500 x 400 x 200 25 200 1mm / 304 Top, under or flush Pressed / Polished Ikon / Northland

60cm 503 x 403 x 200 10 200 1.2mm / 304 Top, under or flush Laser edge Reginox / New York

code IK710021

60cm 503 x 403 x 200 26.5 200 304 Top, under or flush Laser edge Reginox / Ohio

Recommended accessories

550 500

*These accessories are not available in copper

*Individually handcrafted, dimensions may vary to the line drawing 540 500

• Designer colander • Drainer • Sink protection grill • Insert bowl • Roller mat

Recommended accessories • Drainer colander • Sink protection grill • Drainer • Insert bowl

* Optional discounted roller mat

code R28131

OHIO 50X40

550 500

450 400

code IK9553

Recommended accessories • Designer colander • Sink protection grill • Drainer

440 400

WANAKA

60cm 500 x 500 x 300 10 300 1mm / 304 Top, under or flush Handmade / Satin Ikon / Waikato

550 500

540 503

Our Sinks

Recommended accessories • Drainer • Inox care • Waste cover

440 403

code IK3538

440 403

PUTARURU

Recommended accessories • Drainer • Inox care • Waste cover

Our Sinks | Single bowls code IK730003

60cm 503 x 403 x 180 25 200 1mm / 304 Top, under or flush Laser edge Reginox / Ohio

BARIUM

Dimension:

www.ikon.nz Model:

65cm 550 x 400 x 230 10 230 1.2mm / 304 Top, under or flush Handmade / Satin Ikon / Sink Stations

code IK3600

600 550

450 400

600 550

www.ikon.nz

650 600

120

5 R1

450 400

Recommended accessories

Recommended accessories • Designer colander • Chopping board • Drainer • Sink protection grill • Insert bowl • Roller mat

Model: BRIGHTWATER * Comes with board and roller mat Code: FREE chopping IK3600

650 600

70cm 600 x 400 x 220 15 220 1.2mm / 304 Top, under or flush Handmade / Brushed Ikon / Tasman

• Designer colander • Designer strainer • Drainer • Sink protection grill • Insert bowl • Roller mat

450 400

220

NELSON IK3550

Code:

480 430 400

code IK8550

Dimension:

Recommended accessories

120

450 400

5 R1

SMALL SINK STATION

600 550

65cm 550 x 400 x 220 15 220 1.2mm / 304 Top, under or flush Handmade / Brushed Ikon / Tasman

26 ,5

IK730004 (Midnight Sky)

Also available in:

code IK3550

220

BRIGHTWATER

450 400

65cm 550 x 400 x 220 10 220 1.2mm / 304 Top, under or flush Handmade / Satin Ikon / Las Vegas

Recommended accessories • Drainer • Inox care • Waste cover

code IK75501

NELSON

540 503

440 403

50X40 ARCTIC WHITE

ww w.ikon.nz | 0800 83 83 84

Recommended accessories • Designer colander • Designer strainer • Sink protection grill • Drainer • Insert bowl • Roller mat

Our Sinks | Single bowls

70cm 600 x 400 x 220 10 220 1.2mm / 304 Top, under or flush Handmade / Satin Ikon / Las Vegas

ARGON - BUTLER SINK

code IK3010

70cm 600 x 445 x 234 10 234 1.2mm / 304 Top, under or flush Handmade / Satin Ikon / Las Vegas

TIRAU

code IK8650

75cm 650 x 400 x 230 10 230 1.2mm / 304 Top, under or flush Handmade / Satin Ikon / Sink Stations

Dimension:

www.ikon.nz

450 400

Recommended accessories • Designer colander • Drainer • Sink protection grill • Insert bowl • Roller mat

Model: WAKEFIELD * Comes with FREE chopping board and roller mat Code: IK3650 700 650

700 650

Recommended accessories

120

75cm 650 x 400 x 220 15 220 1.2mm / 304 Top, under or flush Handmade / Brushed Ikon / Tasman

Recommended accessories • Sink protection grill • Drainer

700 650

450 400

220

5 R1

code IK3650

650 600

550 500

MEDIUM SINK STATION

Recommended accessories • Sink protection grill

480 430 400

70cm 600 x 500 x 300 10 300 1mm / 304 Top, under or flush Handmade / Satin Ikon / Waikato

Recommended accessories • Designer colander • Designer strainer • Drainer • Sink protection grill • Insert bowl • Roller mat

652 600

code IK3638

WAKEFEILD

650 600

450 400

code IK76040

523 445

IODINE

Our Sinks

• Designer colander • Designer strainer • Drainer • Sink protection grill • Insert bowl • Roller mat

Our Sinks | Single bowls code IK77040

80cm 700 x 400 x 220 10 220 1.2mm / 304 Top, under or flush Handmade / Satin Ikon / Las Vegas

AMSTERDAM 72

code R30882

SINK STATION LARGE • Suggested cabinet size: • Internal dimensions (mm): • Internal radius (mm): • Bowl Depth (mm): • Stainless steel thickness/grade: • Mounting (refer to fabricator): • Other considerations: • Brand / Collection:

• Designer colander • Designer strainer • Drainer • Sink protection grill • Insert bowl • Roller mat

(Charcoal)

• Drainer • Regi-Clean Oil • Waste cover

code IK8750 85cm 750 x 400 x 230 10 230 1.2mm / 304 Top, under or flush Handmade / Satin Ikon / Sink Stations

Recommended accessories

460 400

80cm 720 x 400 x 200 10 200 Granite Top, under or flush Silvery black colour Reginox / Regi-Granite

780 720

800 750

480 430 400

Recommended accessories

750 700

450 400

HELIUM

Recommended accessories • Designer colander • Chopping board • Drainer • Sink protection grill • Insert bowl • Roller mat

* Comes with FREE chopping board and roller mat

ww w.ikon.nz | 0800 83 83 84

Double bowls • Sorted by cabinet size then main bowl width

• If you would like to match multiple bowls in the

(smallest to largest)

same project, we recommend purchasing bowls

• All bowls are either Ikon or Reginox brands

from the same collection (See pages 36-43)

• L/R refers to largest bowl position

• Suggested cabinet size: • Internal dimensions (mm): • • Internal radius (mm): • Bowl Depth (mm): • Stainless steel thickness/grade: • Other considerations: • Brand / Collection:

65cm 340 x 400 x 200 180 x 400 x 150 25 200 / 150 1mm / 304 Pressed / Polished Ikon / Northland

OPONONI

code IK1510 L/R

• Suggested cabinet size: • Internal dimensions (mm): • • Internal radius (mm): • Bowl Depth (mm): • Stainless steel thickness/grade: • Other considerations: • Brand / Collection:

65cm 340 x 400 x 200 170 x 400 x 150 25 200 / 150 1mm / 304 Pressed / Polished Ikon / Northland

MAGNESIUM

580 20

340

• Designer colander • Drainer • Sink protection grill • Insert bowl • Roller mat

* Optional discounted roller mat 580 340

580

code IK8850 L/R

• Internal radius (mm): • Bowl Depth(mm): • Stainless steel thickness/grade: • Other considerations: • Brand / Collection:

75cm 400 x 400 x 220 200 x 400 x 220 10 220 1.2mm / 304 Handmade / Satin Ikon / Sink Stations

180

Recommended accessories • Designer colander • Designer Strainer • Drainer • Insert bowl • Roller mat

400

480 430 400

• Suggested cabinet size: • Internal dimensions (mm):

440 400

SINK STATION 400X200

Recommended accessories

* Optional discounted roller mat

340

65cm 340 x 400 x 200 180 x 400 x 150 10 200 / 150 1.2mm / 304 Handmade | Reversible Ikon / Las Vegas

170

• Drainer colander • Sink protection grill • Drainer • Insert bowl • Roller mat

code IK77750

• Suggested cabinet size: • Internal dimensions (mm): • • Internal radius (mm): • Bowl depth (mm): • Stainless steel thickness/grade: • Other considerations: • Brand / Collection:

Recommended accessories

180

440 400

code IK1515 L/R

440 400

WHANGAPAROA

668 618

200

Recommended accessories • Drainer colander • Sink protection grill • Drainer • Insert bowl • Roller mat • Chopping board

* Comes with FREE roller mat and chopping board

Our Sinks

Our Sinks | Double bowls

code IK1520 L/R 75cm 400 x 400 x 200 200 x 400 x 150 25 200 / 150 1mm / 304 Pressed / Polished Ikon / Northland

ERBIUM

code IK77760

• Suggested cabinet size: • Internal dimensions (mm): • • Internal radius (mm): • Bowl Depth (mm): • Stainless steel thickness/grade: • Other considerations: • Brand / Collection:

660

200

Recommended accessories

• Suggested cabinet size: • Internal dimensions (mm): • • Internal radius (mm): • Bowl Depth (mm): • Stainless steel thickness/grade: • Other considerations: • Brand / Collection:

75cm 403 x 403 x 180 183 x 403 x 145 26.5 180 / 145 304 Laser edge Reginox / Ohio

Recommended accessories • Designer colander • Sink protection gril • Drainer • Insert bowl • Roller mat

653 403

183

Recommended accessories • Elite Drainer • Inox Care • Waste cover

440 403

code IK720015

Please note: Main bowl on left only

code IK73755 L/R 75cm 450 x 400 x 220 200 x 400 x 220 10 220 1.2mm / 304 Handmade / Satin Ikon / Las Vegas

702.4 450

450 400

• Suggested cabinet size: • Internal dimensions (mm): • • Internal radius (mm): • Bowl Depth (mm): • Stainless steel thickness/grade: • Other considerations: • Brand / Collection:

200

* Optional discounted roller mat

OHIO 40X40 + 18X40

SULPHUR

• Designer colander • Sink protection grill • Drainer • Insert bowl

400

75cm 400 x 400 x 200 200 x 400 x 150 10 200 / 150 1.2mm / 304 Handmade | Reversible Ikon / Las Vegas

660

440 400

• Suggested cabinet size: • Internal dimensions (mm): • • Internal radius (mm): • Bowl Depth (mm): • Stainless steel thickness/grade: • Other considerations: • Brand / Collection:

400

440 400

KERIKERI

ww w.ikon.nz | 0800 83 83 84

2.4

200

Recommended accessories • Designer colander • Sink protection grill • Drainer • Insert bowl • Roller mat

Our Sinks | Double bowls WHANGAREI

code IK1525

740 20

340

80cm 340 x 400 x 200 340 x 400 x 200 25 200 1mm / 304 Pressed / Polished Ikon / Northland

• Designer colander • Drainer • Sink protection grill • Insert bowl • Roller mat * Optional discounted roller mat

code R31001 (Charcoal)

860 26

355

• Suggested cabinet size: • Internal dimensions (mm): • • Internal radius (mm): • Bowl Depth (mm): • thickness/grade: • Other considerations: • Brand / Collection:

• Internal radius (mm): • Bowl Depth (mm): • Stainless steel thickness/grade: • Other considerations: • Brand / Collection:

CENTURIO 20

90cm 360 x 420 x 180 360 x 420 x 180 80 180 304 Polished Reginox / Centurio

• Drainer • Regi-Clean Oil • Waste cover

Please note: one of the two wastes cannot hold water completely, this way one of the wastes is acting as an overflow

360

code IK720030L (Laser)

• Drainer • Inox care • Waste cover

code IK8860 L/R

• Suggested cabinet size: • Internal dimensions (mm): • Internal radius (mm): • Bowl Depth (mm): • Stainless steel thickness/grade: • Other considerations: • Brand / Collection:

80cm 400 x 400 x 220 300 x 400 x 220 10 220 1.2mm / 304 Handmade / Satin Ikon / Sink Stations

360

• Drainer • Inox care • Waste cover

490 420

SINK STATION 400X300

400

480 430 400

• Internal radius (mm): • Bowl depth (mm): • Stainless steel thickness/grade: • Other considerations: • Brand / Collection:

90cm 360 x 420 x 180 360 x 420 x 180 80 180 304 Polished Reginox / Centurio

Recommended accessories

850 360

• Suggested cabinet size: • Internal dimensions (mm):

Recommended accessories

850 360

120

code IK720030R (Rolled)

• Suggested cabinet size: • Internal dimensions (mm):

Recommended accessories

355

500 440

90cm 355 x 440 x 200 355 x 440 x 200 10 200 Granite Black silvery colour Reginox / Regi-Granite

490 420

CENTURIO 20

Recommended accessories

340

440 400

• Suggested cabinet size: • Internal dimensions (mm): • • Internal radius (mm): • Bowl Depth (mm): • Stainless steel thickness/grade: • Other considerations: • Brand / Collection:

AMSTERDAM 20

L/R refers to largest bowl position

768 718

300

Recommended accessories • Drainer colander • Sink protection grill • Drainer • Insert bowl • Chopping board • Roller mat

* Comes with FREE Roller Mat and Chopping Board

Our Sinks

Our Sinks | Double bowls HASSIUM

code IK77762

SINK STATION 450X200

code IK8880 L/R

• Suggested cabinet size: • Internal dimensions (mm): • Internal radius (mm): • Bowl Depth (mm): • Stainless steel thickness/grade: • Other considerations: • Brand / Collection:

717 665

Recommended accessories

200

• Drainer colander • Sink protection grill • Drainer • Insert bowl • Chopping board • Roller mat

* Comes with FREE Roller Mat and Chopping Board

KAITAIA

code IK1530 L/R

• Internal radius (mm): • Bowl Depth (mm): • Stainless steel thickness/grade: • Other considerations: • Brand / Collection:

80cm 450 x 400 x 200 200 x 400 x 150 25 200 / 150 1mm / 304 Pressed / Polished Ikon / Northland

200

code IK723021 R

• Suggested cabinet size: • Internal dimensions (mm):

80cm 503 x 403 x 200 183 x 403 x 145 26.5 200 / 145 304 Laser edge Reginox / Ohio

Recommended accessories

832 280

470

125

85cm 470 x 410 x 220 280 x 355 x 220 10 220 Granite Black silvery colour Reginox / Regi-Granite

OHIO 18×40 + 50×40

• Drainer • Regi-Clean Oil • Waste cover

Please note: one of the two wastes cannot hold water completely, this way one of the wastes is acting as an overflow

753 503

125

183

440 403

• Internal radius (mm): • Bowl Depth (mm): • Stainless steel thickness/grade: • Other considerations: • Brand / Collection:

• Designer colander • Sink protection gril • Drainer • Insert bowl • Roller mat

470 410

• Internal radius (mm): • Bowl Depth (mm): • Stainless steel thickness/grade: • Other considerations: • Brand / Collection:

Recommended accessories

450

* Optional discounted roller mat

code R31087 (Charcoal)

• Suggested cabinet size: • Internal dimensions (mm):

710

440 400

• Suggested cabinet size: • Internal dimensions (mm):

AMSTERDAM 25

• Drainer colander • Sink protection grill • Drainer • Insert bowl • Roller mat

450

80cm 450 x 400 x 220 200 x 400 x 220 10 220 1.2mm / 304 Handmade / Satin Ikon / Sink Stations

Recommended accessories

200

450 400

• Internal radius (mm): • Bowl Depth • Stainless steel thickness/grade: • Other considerations: • Brand / Collection:

80cm 450 x 400 x 220 200 x 400 x 220 10 220 1.2mm / 304 Handmade / Reversible Ikon / Las Vegas

480 430 400

• Suggested cabinet size: • Internal dimensions (mm):

725

450

Recommended accessories • Drainer • Regi-Clean Oil • Waste cover

Please note: Main bowl is on the right only

ww w.ikon.nz | 0800 83 83 84

Our Sinks | Double bowls

SODIUM • Suggested cabinet size: • Internal dimensions (mm):

code IK1535 L/R

• Suggested cabinet size: • Internal dimensions (mm): • Internal radius (mm): • Bowl Depth (mm): • Stainless steel thickness/grade: • Other considerations: • Brand / Collection:

85cm 500 x 400 x 200 200 x 400 x 150 25 200 / 150 1mm / 304 Pressed / Polished Ikon / Northland

ASTITINE

code IK73760

• Suggested cabinet size: • Internal dimensions (mm): • Internal radius (mm): • Bowl depth (mm): • Stainless steel thickness/grade: • Other considerations: • Brand / Collection:

90cm 400 x 400 x 220 400 x 400 x 220 10 220 1.2mm / 304 Handmade / Satin Ikon / Las Vegas

OXFORD

code IK2855 W

Recommended accessories

300

• Designer colander • Sink protection grill • Drainer • Insert bowl • Roller mat

Recommended accessories

760 20

500

• Drainer colander • Sink protection grill • Drainer • Insert bowl • Roller mat

440 400

120

200

* Optional discounted roller mat

400

852.4 2.4

400

Recommended accessories

450 400

• Drainer colander • Sink protection grill • Drainer • Insert bowl • Roller mat

345

90cm 400 x 420 x 205 345 x 355 x 205 10 205 Quartz / Granite 10 year warranty Ikon / Seattle

802.4 2.4

450 400

MANGAWHAI

• Designer colander • Sink protection grill • Drainer • Insert bowl • Roller mat

450

• Internal radius (mm): • Bowl Depth (mm): • thickness/grade: • Other considerations: • Brand / Collection:

• Internal radius (mm): • Bowl depth (mm): • Stainless steel thickness/grade: • Other considerations: • Brand / Collection:

200

code IK73759 L/R 85cm 450 x 400 x 220 300 x 400 x 220 10 220 1.2mm / 304 Handmade / Satin Ikon / Las Vegas

• Suggested cabinet size: • Internal dimensions (mm):

2.4

450 400

• Internal radius (mm): • Bowl Depth (mm): • Stainless steel thickness/grade: • Other considerations: • Brand / Collection:

80cm 500 x 400 x 220 200 x 400 x 220 10 220 1.2mm / 304 Handmade / Satin Ikon / Las Vegas

Recommended accessories

752.4 500

860 35

400

• Suggested cabinet size: • Internal dimensions (mm):

code IK73757 L/R

Recommended accessories • Roller mat • Regi-clean oil

500 355

FLUORINE

L/R refers to largest bowl position

Please note: Main bowl on right only

Our Sinks

*ON SPECIAL!

Our Sinks | Double bowls

• Brand / Collection:

SINK STATION 450X300 • Suggested cabinet size: • Internal dimensions (mm):

BISMUTH

code IK77764

• Internal radius (mm): • Bowl Depth (mm): • Stainless steel thickness/grade: • Other considerations: • Brand / Collection:

90cm 500 x 400 x 220 250 x 400 x 190 10 220 / 190 1.2mm / 304 Handmade / Reversible Ikon / Las Vegas

DOUBLE SINK STATION

code IK8870

818 450

300

Recommended accessories • Drainer colander • Sink protection grill • Drainer • Insert bowl • Chopping board • Roller mat

* Comes with FREE Roller mat and Chopping board

826 500

250

Recommended accessories • Drainer colander • Sink protection grill • Drainer • Insert bowl • Chopping board • Roller mat

400

868 18

400

Recommended accessories

95cm • Designer colander 400 x 400 x 220 • Sink protection gril 400 x 400 x 220 • Drainer 10 • Insert bowl 220 • Chopping board 1.2mm / 304 • Roller mat Handmade / Satin Ikon / Sink Stations * Comes with FREE Roller mat and Chopping board 480 430 400

• Internal radius (mm): • Bowl Depth (mm): • Stainless steel thickness/grade: • Other considerations: • Brand / Collection:

Recommended accessories • Drainer colander • Sink protection grill • Drainer • Insert bowl • Chopping board • Roller mat

code IK8890 L/R

• Internal radius (mm): • Bowl Depth • Stainless steel thickness/grade: • Other considerations: • Brand / Collection:

• Suggested cabinet size: • Internal dimensions (mm):

300

Handmade/Satin/Reversible

90cm 450 x 400 x 220 300 x 400 x 220 10 220 1.2mm / 304 Handmade / Satin Ikon / Las Vegas

• Suggested cabinet size: • Internal dimensions (mm):

450 400

• Internal radius (mm): • Bowl Depth (mm): • Stainless steel thickness/grade: • Other considerations:

90 cm 450 x 400 x 220 300 x 400 x 190 10 220/190 1.2mm / 304 Handmade / Reversible Ikon / Las Vegas

826 450

480 430 400

• Suggested cabinet size: • Internal dimensions (mm):

code IK77766

450 400

RADIUM

ww w.ikon.nz | 0800 83 83 84

Single bowl & drainers • Sorted by cabinet size then main bowl width

• If you would like to match multiple bowls in the

(smallest to largest)

same project, we recommend purchasing bowls

• All bowls are either Ikon or Reginox brands

from the same collection (See pages 36-43)

• All bowls are reversible

COMPACT 10

code IK710109

QUEEN R30

40cm 330 x 350 x 145 80 145 304 Rolled edge Reginox / Commercial

595 340

REGENT 10

code IK710127

• Suggested cabinet size: • Internal dimensions (mm): • Internal radius (mm): • Bowl Depth (mm): • Stainless steel thickness/grade: • Other considerations: • Brand / Collection:

45cm 340 x 400 x 170 80 170 304 Rolled edge Reginox / Comfort

• Inox care • Waste cover

805 340

480 400

850 360

Recommended accessories • Inox care • Waste cover

490 420

45cm 360 x 420 x 180 80 180 304 Polished Reginox / Centurio

Recommended accessories • Inox care • Waste cover

code IK710160I (Laser)

• Suggested cabinet size: • Internal dimensions (mm): • Internal radius (mm): • Bowl Depth • Stainless steel thickness/grade: • Other considerations: • Brand / Collection:

Recommended accessories

470 400

45cm 340 x 400 x 145 80 145 304 Bevelled edge Reginox / Comfort

• Inox care • Waste cover

code IK710121

• Suggested cabinet size: • Internal dimensions (mm): • Internal radius (mm): • Bowl depth (mm): • Stainless steel thickness/grade: • Other considerations: • Brand / Collection:

Recommended accessories

430 350

• Suggested cabinet size: • Internal dimensions (mm): • Internal radius (mm): • Bowl depth (mm): • Stainless steel thickness/grade: • Other considerations: • Brand / Collection:

CENTURIO 10

780 330

Our Sinks

Our Sinks | Single bowl & drainers

DIPLOMAT 10

code IK710115 360

FEILDING

45cm 360 x 420 x 160 80 160 304 Polished / Rolled edge Reginox / Comfort

• Inox care • Waste cover 500 420

• Suggested cabinet size: • Internal dimensions (mm): • Internal radius (mm): • Bowl Depth (mm): • Stainless steel thickness/grade: • Other considerations: • Brand / Collection:

code IK1350 400

code R30929 (Charcoal)

SHANNON • Suggested cabinet size: • Internal dimensions (mm): • Internal radius (mm): • Bowl Depth (mm): • Stainless steel thickness/grade: • Other considerations: • Brand / Collection:

50cm 400 x 440 x 200 10 200 Granite Black, silvery colour Reginox / Regi-Granite

860

400

code IK1355 55cm 450 x 400 x 200 25 200 1mm / 304 Handmade / Satin Ikon / Manawatu

Recommended accessories • Regi-Clean Oil • Waste cover

500 440

• Suggested cabinet size: • Internal dimensions (mm): • Internal radius (mm): • Bowl Depth (mm): • Stainless steel thickness/grade: • Other considerations: • Brand / Collection:

410

Recommended accessories • Designer colander • Insert bowl • Roller mat • Inox care

450

450 440

AMSTERDAM 10

50cm 400 x 400 x 200 25 200 1mm / 304 Handmade / Satin Ikon / Manawatu

860

450 400

• Suggested cabinet size: • Internal dimensions (mm): • Internal radius (mm): • Bowl Depth (mm): • Stainless steel thickness/grade: • Other considerations: • Brand / Collection:

Recommended accessories

860

ww w.ikon.nz | 0800 83 83 84

910

410

Recommended accessories • Designer colander • Insert bowl • Roller mat • Inox care

Our Sinks | Single bowl & drainers CHLORINE

code IK73710

FOXTON

60cm 450 x 400 x 200 10 200 1.2mm / 304 Handmade / Satin Ikon / Las Vegas

code IK710145

• Suggested cabinet size: • Internal dimensions (mm): • Internal radius (mm): • Bowl Depth (mm): • Stainless steel thickness/grade: • Other considerations: • Brand / Collection:

60cm 520 x 475 x 200 100 200 304 Polished / Rolled edge Reginox / Comfort

520

1000

540

1000

Recommended accessories • Regi-Clean Oil • Waste cover

500 440

60cm 400 x 440 x 200 10 200 Granite Black silvery colour Reginox / Regi-Granite

Recommended accessories • Inox care • Waste cover

code R30806 (Charcoal)

• Suggested cabinet size: • Internal dimensions (mm): • Internal radius (mm): • Bowl Depth (mm): • Stainless steel thickness/grade: • Other considerations: • Brand / Collection:

410

Recommended accessories • Designer colander • Insert bowl • Roller mat • Inox care

450 440

MINISTER 10

500

960

500 420

60cm 500 x 400 x 200 25 200 1mm / 304 Handmade / Satin Ikon / Manawatu

• Designer Colander • Roller Mat

code IK1365

• Suggested cabinet size: • Internal dimensions (mm): • Internal radius (mm): • Bowl Depth (mm): • Stainless steel thickness/grade: • Other considerations: • Brand / Collection:

AMSTERDAM 540

450

430 400

• Suggested cabinet size: • Internal dimensions (mm): • Internal radius (mm): • Bowl Depth (mm): • Stainless steel thickness/grade: • Other considerations: • Brand / Collection:

Recommended accessories

1000

Our Sinks

All bowls are reversible

Our Sinks | Double bowl & drainer

From our newest collection MAN AWAT U C O LLE C T IO N

Sink: Foxton

Lockwood Homes Sia Design | Paeroa

ww w.ikon.nz | 0800 83 83 84

Double bowl & drainers • Sorted by cabinet size then main bowl width

• If you would like to match multiple bowls in the

(smallest to largest)

same project, we recommend purchasing bowls

• All bowls are reversible

from the same collection (See pages 36-43)

• All bowls are either Ikon or Reginox brands

code IK723143I (Laser)

• Internal radius (mm): • Bowl depth (mm): • Stainless steel thickness/grade: • Other considerations: • Brand / Collection:

AMSTERDAM 15

• Inox care • Colander • Waste cover

code R30967 (Charcoal)

• Suggested cabinet size: • Internal dimensions (mm):

• Brand / Collection:

NITROGEN • Suggested cabinet size: • Internal dimensions (mm): • Internal radius (mm): • Bowl Depth (mm): • Stainless steel thickness/grade: • Other considerations: • Brand / Collection:

60cm 440 x 440 x 200 158 x300 x 140 10 200/ 140 Granite Black silvery colour Reginox / Regi-Granite

400

• Waste • Regi-Clean Oil • Waste cover

Please note: one of the two wastes cannot hold water completely, this way one of the wastes is acting as an overflow

code IK73750 65cm 350 x 400 x 200 190 x 400 x 200 10 200 1.2mm / 304 Satin / Bevelled edge Ikon / Las Vegas

Recommended accessories

1000 158

500 300

• Internal radius (mm): • Bowl depth (mm): • Stainless steel thickness/grade: • Other considerations:

60cm 360 x 420 x 180 160 x 420 x 130 80 180 / 130 304 Polished Reginox / Centurio

490 420

• Suggested cabinet size: • Internal dimensions (mm):

Recommended accessories

940 160

360

350

480 430 400

CENTURIO 1.5

1000 190

Recommended accessories • Designer Colander • Roller Mat

Our Sinks | Double bowl & drainers

• Internal radius (mm): • Bowl Depth • Stainless steel thickness/grade: • Other considerations: • Brand / Collection:

75cm 450 x 400 x 220 190 x 400 x 190 10 220 / 190 1.2mm / 304 Satin / Bevelled edge Ikon / Las Vegas

REGENT 25

code IK727105

• Suggested cabinet size: • Internal dimensions (mm): • Internal radius (mm): • Bowl Depth (mm): • Stainless steel thickness/grade: • Other considerations: • Brand / Collection:

80cm 400 x 400 x 170 280 x 400 x 131 80 170 / 131 304 Rolled edge Reginox / Comfort

450

1100 1050 25 190

Recommended accessories • Designer Colander • Roller Mat

480 430 400

• Suggested cabinet size: • Internal dimensions (mm):

code IK73748

400

1190 280

Recommended accessories • Inox care • Waste cover

480 400

RADON

ww w.ikon.nz | 0800 83 83 84

Our Sinks | Sinks by collection TASMAN COLLECTION

• Can be top mounted into all benchtop surfaces, under mounted or flush mounted only into solid surface (refer to your fabricator) • Produced using 1.2mm thick high grade 304 stainless steel • 15mm internal corner radius

• Handmade bowl with brushed finish • Built in overflow • Comes complete with clips (if top mounting) basket waste and overflow connection • Life time warranty

MURCHISON

MOTUEKA

code IK3300 Page: 14

code IK3400 Page: 16

COLLINGWOOD

300 x 400 x 220mm Cabinet size: 40cm

400 x 400 x 220mm Cabinet size: 50cm

450 x 400 x 220mm Cabinet size: 55cm

RICHMOND

NELSON

BRIGHTWATER

code IK3500 Page: 19

code IK3550 Page: 21

500 x 400 x 220mm Cabinet size: 60cm

550 x 400 x 220mm Cabinet size: 65cm

code IK3450 Page: 17

code IK3600 Page: 21

600 x 400 x 220mm Cabinet size: 70cm

WAKEFIELD code IK3650 Page: 22 650 x 400 x 220mm Cabinet size: 75cm

NORTHLAND COLLECTION

• Can be top mounted into all benchtop surfaces, under mounted or flush mounted only into solid surface (refer to your fabricator) • Produced using 1.0mm thick high grade 304 stainless steel • 25mm internal corner radius

waste and overflow connection Lifetime warranty

DARGAVILLE

WELLSFORD

KAMO

340 x 400 x 200mm Cabinet size: 45cm

400 x 400 x 200mm Cabinet size: 50cm

450 x 400 x 200mm Cabinet size: 55cm

RUSSELL

WHANGAPARAOA

500 x 400 x 200mm Cabinet size: 60cm

OPONONI code IK1510 L/R Page: 24 340 x 400 x 200mm 170 x 400 x 150mm Cabinet size: 65cm

KERIKERI

KAITAIA

MANGAWHAI

450 x 400 x 200mm 200 x 400 x 150 mm Cabinet size: 80cm

500 x 400 x 200mm 200 x 400 x 150mm Cabinet size: 85cm

code IK1403 Page: 15

code IK1540 Page: 20

code IK1520 L/R Page: 25 400 x 400 x 200mm 200 x 400 x 150mm Cabinet size: 75cm WHANGAREI code IK1525 Page: 25

340 x 400 x 200mm 340 x 400 x 200mm Cabinet size: 60cm

• Pressed bowl with polished satin finish • Built in overflow • Comes complete with clips (if top mounting) basket

code IK1404 Page: 16

code IK1530 L/R Page: 27

Optional Discounted ROLLER MAT code IKRM (Page 46)

Our Sinks

code IK1454 Page: 18

code IK1515 L/R Page: 26 340 x 400 x 200mm 180 x 400 x 150mm Cabinet size: 65cm code IK1535 L/R Page: 28

Our Sinks | Sinks by collection •

LAS VEGAS COLLECTION

• • •

Can be top mounted into all benchtop surfaces, under mounted or flush mounted only into solid surface (refer to your fabricator) Produced using 1.2mm thick high grade 304 stainless steel 5mm external & 10mm internal corner radius Hand made bowls with satin finish

• • • •

HYDROGEN

GALLIUM

200 x 400 x 220mm Cabinet size: 40cm

300 x 400 x 220mm Cabinet size: 45cm

code IK72021 Page: 14

LITHIUM

code IK74041 Page: 15 400 x 400 x 220mm Cabinet size: 50cm KRYTON

code IK73041 Page: 14

OSMIUM code IK74501 Page: 17 450 x 400 x 220mm Cabinet size: 55cm

Fully insulated to reduce noise and keep water warmer for longer Built in overflow

Comes complete with clips (if top mounting) basket waste and overflow connection Lifetime warranty

BRONZE

code IK71520 Page: 15 329 x 458 x 220mm Cabinet size: 45cm

ZINC

code IK72015 Page: 18 458 x 329 x 220mm Cabinet size: 60cm

code IK73712 Page: 19

code IK75041 Page: 19

SELENIUM

BARIUM

465 x 400 x 220mm Cabinet size: 60cm

500 x 400 x 220mm Cabinet size: 60cm

550 x 400 x 220mm Cabinet size: 65cm

IODINE

ARGON BUTLER SINK

HELIUM

code IK76040 Page: 22

code IK3010 Page: 22

600 x 400 x 220mm Cabinet size: 70cm

600 x 445 x 234mm Cabinet size: 70cm

code IK75501 Page: 21

code IK77040 Page: 23 700 x 400 x 220mm Cabinet size: 80cm

CHLORINE

NITROGEN

RADON

450 x 400 x 200mm Cabinet size: 60cm

350 x 400 x 200mm 190 x 400 x 200mm Cabinet size: 65cm

450 x 400 x 220mm 190 x 400 x 190mm Cabinet size: 75cm

MAGNESIUM

ASTITINE code IK73760 Page: 28 400 x 400 x 220mm 400 x 400 x 220mm Cabinet size: 90cm

ERBIUM

code IK73710 Page: 32

code IK77750 Page: 24 340 x 400 x 200mm 180 x 400 x 150mm Cabinet size: 65cm HASSIUM

code IK73750 Page: 34

code IK73748 Page: 35

code IK77760 Page: 25 400 x 400 x 200mm 200 x 400 x 150 mm Cabinet size: 75cm

RADIUM

SODIUM

code IK77766 Page: 29

code IK73759 L/R Page: 28

450 x 400 x 220mm 200 x 400 x 220mm Cabinet size: 80cm

450 x 400 x 220mm 300 x 400 x 220mm Cabinet size: 90cm

450 x 400 x 220mm 300 x 400 x 220mm Cabinet size: 85cm

SULPHUR

BISMUTH

FLUORINE

code IK77764 Page: 29

code IK73757 L/R Page: 28

500 x 400 x 220mm 250 x 400 x 190mm Cabinet size: 90cm

500 x 400 x 220mm 200 x 400 x 220mm Cabinet size: 80cm

code IK77762 Page: 27

code IK73755 L/R Page: 25 450 x 400 x 220mm 200 x 400 x 220mm Cabinet size: 75cm

ww w.ikon.nz | 0800 83 83 84

Our Sinks | Sinks by collection SINK STATIONS COLLECTION

• • • •

Can be top mounted into all benchtop surfaces. Under mounted or flush mounted only into solid surface. Refer to your fabricator Produced using 1.2mm thick high grade 304 stainless steel 10mm internal corner radius Hand made bowls with satin finish

• • • • •

Fully insulated to reduce noise, keep water warmer and ice colder for longer Sound proofing pads on all sides Built in overflow Comes complete with clips (if top mounting) basket waste and overflow connection Lifetime warranty

JUNIOR SINK STATION

SMALL SINK STATION

code IK8450 Page: 17

code IK8550 Page: 21

250 x 400 x 230mm Cabinet size: 40cm

450 x 400 x 230mm Cabinet size: 55cm

550 x 400 x 230mm Cabinet size: 65cm

MEDIUM SINK STATION

LARGE SINK STATION

SINK STATION 400×200

650 x 400 x 230mm Cabinet size: 75cm

750 x 400 x 230mm Cabinet size: 85cm

400 x 400 x 220mm 200 x 400 x 220mm Cabinet size: 75cm

SINK STATION 400×300

DOUBLE SINK STATION

SINK STATION 450×200

400 x 400 x 220mm 300 x 400 x 220mm Cabinet size: 80cm

400 x 400 x 220mm 400 x 400 x 220mm Cabinet size: 95cm

450 x 400 x 220mm 200 x 400 x 220mm Cabinet size: 80cm

MINI SINK STATION* code IK8250 Page: 14

code IK8650 Page: 22

code IK8860 L/R Page: 26

code IK8650 Page: 23

code IK8870 Page: 29

code IK8850 L/R Page: 24

code IK8880 L/R Page: 27

SINK STATION 450×300 code IK8890 L/R Page: 29

450 x 400 x 220mm 300 x 400 x 220mm Cabinet size: 90cm

All Sink Stations come with a FREE Chopping Board and Roller Mat this doesn’t apply to the Mini Sink Station*

SINK STATIONS ACCESSORIES CHOPPING BOARD

ROLLER MAT

INDIUM INSERT BOWL

CESIUM INSERT BOWL

DESIGNER DRAINER

DESIGNER COLANDER

code STEPCB (Page 46)

code IK77711 (Page 46)

code IK420 (Page 46)

code IKRM (Page 46)

code IK423 (Page 46)

code IK721 (Page 45)

Our Sinks

code IK77712 (Page 46)

code IK360 (Page 46) Doesn’t fit inside sink

code IK722 (Page 46)

Our Sinks | Sinks by collection MANAWATU COLLECTION

• • • •

Can be top mounted into all benchtop surfaces. Under mounted or flush mounted only into solid surface. Refer to your fabricator Produced using 1mm thick high grade 304 stainless steel 25mm internal corner radius Handmade bowls with satin finish

• • • • •

Fully insulated to keep your water warmer and ice colder for longer Sound proofing pads on two sides to reduce noise Built in designer overflow Comes with clips (if top mounting), basket waste and overflow connection Lifetime warranty

FEILDING

SHANNON

FOXTON

400 x 400 x 200mm Cabinet size: 50cm

450 x 400 x 200mm Cabinet size: 55cm

500 x 400 x 200mm Cabinet size: 60cm

code IK1350 Page: 31

MARLBOROUGH COLLECTION

code IK1355 Page: 31

• • • •

Can be top mounted into all benchtop surfaces. Under mounted or flush mounted only into solid surface. Refer to your fabricator Produced using 1mm thick high grade 304 stainless steel 8mm external & 25mm internal corner radius Single pressed bowls with satin finish

code IK1365 Page: 32

• • • •

Fully insulated to reduce noise & keep water warmer for longer Built in overflow Comes complete with clips (if top mounting) basket waste and overflow connection Lifetime warranty EXTRA DEEP SINKS 250mm depth

PICTON

BLENHEIM

code IK454025 Page: 18

code IK504025 Page: 19

400 x 400 x 250mm Cabinet size: 50cm

450 x 400 x 250mm Cabinet size: 55cm

500 x 400 x 250mm Cabinet size: 60cm

code IK404025 Page: 16

WAIKATO COLLECTION

PUTARURU

code IK3538 Page: 20 500 x 500 x 300mm Cabinet size: 60cm

• • • •

Can be top mounted into all benchtop surfaces. Under mounted or flush mounted only into solid surface. Refer to your fabricator Produced using 1mm thick high grade 304 stainless steel 5mm external & 1mm internal corner radius Hand made bowls with satin finish

ANAKIWA

• • • •

Insulated to reduce noise and keep water warmer for longer Built in overflow Comes complete with clips (if top mounting), basket waste and overflow connection Lifetime warranty

TIRAU

code IK3638 Page: 22

EXTRA DEEP SINKS 300mm depth

600 x 500 x 300mm Cabinet size: 70cm

ww w.ikon.nz | 0800 83 83 84

Our Sinks | Sinks by collection •

OTAGO COLLECTION

Can be top mounted into all benchtop surfaces. Under mounted or flush mounted only into solid surface. Refer to your fabricator 99.95% copper or brass material

• •

Can be top, under or flush mounted (under mounting into laminate is not recommended, refer to your fabricator)

• • • • • •

Produced using 1.3mm thick high grade copper or brass 5mm external & 10mm internal corner radius Handmade sinks Built in overflow Comes complete with copper or brass basket waste & overflow connection 5 year warranty

RANFURLY | COPPER

ROXBURGH | COPPER code IK9552 Page: 18

code IK9553 Page: 20

400 x 400 x 220mm Cabinet size: 50cm

450 x 400 x 220mm Cabinet size: 55cm

500 x 400 x 220mm Cabinet size: 60cm

MILTON | BRASS

LAWRENCE | BRASS

400 x 400 x 220mm Cabinet size: 50cm

450 x 400 x 220mm Cabinet size: 55cm

code IK9551 Page: 16

code IK9555 Page: 16

WANAKA | COPPER

code IK9556 Page: 18

PS. These are not PVD or coloured sinks, they are true copper and brass sinks to their cores. The advantages of copper & brass is the antibacterial nature, low stain quality and ease of maintainance. Copper sinks will form a patina finish over time, which will change the look of the sink. These sinks have a laquered finish which gives them their shine. Copper and brass as a metal react quickly to acids and hot utensils so make sure you take care of them appropriately.

•

SEATTLE COLLECTION

• • •

Can be top mounted into all benchtop surfaces. Under mounted or flush mounted only into solid surface. Refer to your fabricator 10mm internal corner radius Reduction in noise transfer through the sink Impact resistant (if you drop a pan within height of one meter - no deformation, cracking or crushing will occur)

• • • • • • •

Hard, durable surface Acid & Alkali resistant Antibacterial and extremely hygienic Pressure resistant (can withstand up to 300kgs) Oil stain resistant, easy to clean & odour free Heat proof up to 330C 10 year warranty

OXFORD WHITE code IK2855W Page: 28

*ON SPECIAL!

400 x 355 x 205mm 345 x 355 x 205mm Cabinet size: 50cm

*Please note: The main bowl is only on the right side

Quartz & Granite sinks are made from quartzite, a natural mineral resource which is stable on both physical and chemical properties. These sinks are made from top quartz material and PMMA (polymethyl methacrylate) for hardworking kitchens.

Our Sinks

Our Sinks | Sinks by collection •

OHIO COLLECTION

Can be top mounted into all benchtop surfaces. Under mounted or flush mounted only into solid surface. Refer to your fabricator 304 High grade Stainless Steel 26.5mm internal radius corners

• •

• • • •

Single press process with matte finish and laser edge Designer overflow Comes complete with clips (if top mounting), basket waste and overflow Lifetime warranty

OHIO 50×40

OHIO 40×40 + 18×40 code IK710021L Page: 25

OHIO 18×40 + 50×40 code IK723021R Page: 27

503 x 403 x 200mm Cabinet size: 60cm

183 x 403 x 180mm 403 x 403 x 180mm Cabinet size: 80cm

code IK710021 Page: 20

OHIO COLOURED COLLECTION

•

Can be top mounted into all benchtop surfaces. Under mounted or flush mounted only into solid surface. Refer to your fabricator 1.0mm thick stainless steel, 304 18/10 with Regicolour coating 15mm outside & 25mm internal radius corners

• •

• • • •

Laser edge Comes complete with clips (if top mounting) basket waste and overflow Designer overflow 5 year warranty

40×40 ARCTIC WHITE

50×40 ARCTIC WHITE

50×40 MIDNIGHT SKY

403 x 403 x 180mm Cabinet size: 50cm

503 x 403 x 200mm Cabinet size: 60cm

code IK730001 Page: 17

code IK730003 Page: 21

code IK730004 Page: 20

This unique and innovative sinkware allows the homeowner the durability, lightness and hygienic factors of stainless steel while providing the latest trend of having coloured sinks in your kitchen. They have passed independent tests for scratch resistance 150 1518-2, impact resistance 150 6272-1 and taber abrasion resistance ASTMD4060. These tests mean that the steel meets the requirements for use in kitchen and bathrooms.

COMFORT COLLECTION

• • •

QUEEN R30

code IK710121 Page: 30 340 x 400 x 145mm Cabinet size: 45cm

Can be top mounted into all benchtop surfaces. Under mounted or flush mounted only into solid surface. Refer to your fabricator 304 High grade Stainless Steel Polished finish

REGENT 10

code IK710127 Page: 30 340 x 400 x 145mm Cabinet size: 45cm

MINISTER 10

REGENT 25

code IK710145 Page: 32

code IK727105 Page: 35

520 x 475 x 200mm Cabinet size: 60cm

400 x 400 x 170mm 280 x 400 x 131mm Cabinet size: 80cm

ww w.ikon.nz | 0800 83 83 84

•

Standard Reginox overflow

•

Lifetime warranty

•

Comes complete with clips (if top mounting), basket waste and overflow

DIPLOMAT 10

code IK710115 Page: 31

360 x 420 x 160mm Cabinet size: 45cm

Our Sinks | Sinks by collection CENTURIO COLLECTION

• • •

Can be top mounted into all benchtop surfaces. Under mounted or flush mounted only into solid surface. Refer to your fabricator 304 High grade Stainless Steel Polished finish

CENTURIO 10

CENTURIO 1.5

360 x 420 x 180mm Cabinet size: 50cm

360 x 420 x 180mm 160 x 420 x 130mm Cabinet size: 60cm

code IK710160I Page: 30

Standard Reginox overflow Comes complete with clips (if top mounting), basket waste and overflow Lifetime warranty

•

CENTURIO 20

code IK720030I Laser or Rolled Page: 26

code IK723143I Page: 34

(Intergrated edge)

AMSTERDAM REGI-GRANITE COLLECTION

• •

360 x 420 x 180mm 360 x 420 x 108mm Cabinet size: 90cm

(Intergrated/Laser edge)

• • • • •

Can be top mounted into all benchtop surfaces. Under mounted or flush mounted only into solid surface. Refer to your fabricator 10mm internal corner radius Reduction in noise transfer through the sink Impact resistant (if you drop a pan within height of one metre - no deformation, cracking or crushing will occur) Hard, durable surface

• • • • • • •

Acid & Alkali resistant Antibacterial and extremely hygienic Pressure resistant (can withstand up to 300kgs) Oil stain resistant, easy to clean & odour free Heat proof up to 330C 5 year warranty Available: REGI-CLEAN DESCALER & REGI-CLEAN OIL COATING

Please note: For the Amsterdam 15, 20, 25, one of the two wastes cannot hold water completely. This way one of the wastes is acting as an overflow.

AMSTERDAM 40 code R34637 | Pure Black Page: 15 400 x 400 x 200mm Cabinet size: 50cm Also available in Charcoal code R32312 Page: 15

AMSTERDAM 50

code R34644 | Pure Black Page: 19 500 x 400 x 200mm Cabinet size: 60cm

code R30882 | Charcoal Page: 23 720 x 400 x 200mm Cabinet size: 80cm

Also available: Charcoal | code R30844 Page: 18

AMSTERDAM 20

Pure white | code R30837 Page: 18

355 x 440 x 200mm 355 x 440 x 200mm Cabinet size: 90cm

code R31001 | Charcoal Page: 26

AMSTERDAM 25

AMSTERDAM 15

AMSTERDAM 10

470 x 410 x 220mm 280 x 355 x 220mm Cabinet size: 85cm

400 x 440 x 200mm 158 x 300 x 140mm Cabinet size: 60cm

400 x 440 x 200mm Cabinet size: 50cm

code R31087 | Charcoal Page: 27

code R30967 | Charcoal Page: 34

AMSTERDAM 540

code R30806 | Charcoal Page: 32 540 x 440 x 200mm Cabinet size: 60cm

AMSTERDAM 72

Our Sinks

code R30929 | Charcoal Page: 31

Our Sinks | Sinks by collection COMMERCIAL COLLECTION

• • •

Can be top mounted into all benchtop surfaces. Under mounted or flush mounted only into solid surface. Refer to your fabricator Ideal for small spaces such as kitchenettes, boats & caravans Polished finish

• •

304 High grade Stainless Steel Comes complete with clips (if top mounting), basket waste and overflow 10 year warranty

•

COMPACT 10

code IK710109 Page: 30 330 x 350 x 145mm Cabinet size: 40cm

NEW YORK COLLECTION

• • •

NEW YORK 40×40 code R28124 Page: 17

403 x 403 x 180mm Cabinet size: 50cm Semi laser edge

Can be top mounted into all benchtop surfaces. Under mounted or flush mounted only into solid surface. Refer to your fabricator 304 High grade Stainless Steel 10mm internal radius corners

• • •

Single press process with either laser or semi laser edge Comes complete with clips, basket waste and overflow Lifetime warranty

NEW YORK 50×40

code R28131 Page: 20 503 x 403 x 200mm Cabinet size: 60cm Semi laser edge

ww w.ikon.nz | 0800 83 83 84

Our

Sink accessories

Reginox Colander: R37652

Our Sink accessories | Ikon collection WHITE / CHROME

AIR SWITCH

code ASC Cut out: 32-35mm Maximum bench thickness: 55mm Button: 50mm (external measururement) Comes with white & chrome

BLACK

code ASCB Cut out: 32-35mm Maximum bench thickness: 55mm

425 395

DESIGNER COLANDER

225 195

Code IK721 Depth: 98mm Fits most bowls

423 380

DESIGNER COLANDER

230 185

Code IK722 Depth: 98mm Fits Chlorine, Nitrogen and Sink Stations

365

DESIGNER STRAINER 425

DESIGNER STRAINER

SINK PROTECTION GRILL

Code IK941 Stainless steel grade: 1.2mm Fits most sinks

DESIGNER STRAINER

Code IKPG300 IKPG400 IKPG450 IKPG500

Internal dimensions (mm) 300 x 400 400 x 400 450 x 400 500 x 400

Designed to fit a bowl with 10-25 radius corners

ww w.ikon.nz | 0800 83 83 84

Our Sink accessories | Ikon collection

FLAT ROLLER MAT

ROUND ROLLER MAT

ROLLER MAT

Code IKFMAT 304 stainless steel rods Size: 440 x 400mm Silcone ends Dishwasher suitable

Code IKRM 304 stainless steel rods Size: 420 x 430mm Silcone ends Dishwasher suitable Comes free with any Sink Station purchased (excluding the Mini) 420 390

Code: Model:

405 385

IK420

DESIGNER DRAINER

330 360

www.ikon.nz

Code IK360 Handmade Size: 405 x 360mm *Doesn’t fit inside Sinks

Model:

WASTE

HOW IT WORKS

IK420

DESIGNER DRAINER

www.ikon.nz

Code IK270 Stainless Steel: 316

ON SPECIAL!

• Made for commercial sinks • Special filtering system • Complies with council regulations

327 295

INSERT BOWL

232 200

420

Code IK77712 Size: 200 x 327mm Depth: 130mm Fits into any 400mm wide sink (in the Ikon range)

419 387

Code IK77711 Size: 295 x 387mm Depth: 130mm Fits into any 400mm wide sink (in the Ikon range)

300

WA01

Non overflow waste for Dakota Collection

WA06

Shiny black waste for the Arizona Collection

WA04

Overflow for Las Vegas, Washington, Florida, Seattle & Sink Stations

WA14

Matt black overflow waste

WA05

Non overflow waste for Las Vegas, Washington, Florida, Seattle & Sink Stations

WA15

Matt black non overflow waste

STEPCB

Code STEPCB Bamboo chopping board to suit Ikon Sink Stations. Comes free with any Sink Station purchased (excluding the Mini)

• 420 x 300 x 20mm

INSERT BOWL

WASTE

CHOPPING BOARD

Code IK423 Handmade Size: 524 x 420mm

DESIGNER DRAINER

Code:

COMMERCIAL WASTE

DESIGNER DRAINER

Dimension:

345 325

Code IK420 Handmade Size: 420 x 345mm

524 500

DESIGNER DRAINER

Dimension:

DESIGNER DRAINER

420 390

Our Sink accessories

Our Sink accessories | Reginox collection

CLEANING

INOX CARE

REGI-CLEAN OIL COATING

Code A1999 Use this cream for cleaning any Reginox sinks

Code R34507 Use this to protect your sink from marks and stains

REGI-CLEAN DESCALER

Code R34491 Use this for cleaning of your Regi-Granite sinks, taps and worktops

WASTE COVER | BRUSHED

WASTE COVERS

WASTE COVER | CHROME

Code AW115 Fits all round 90mm waste Reginox Sinks

Code AW116 Fits all round 90mm waste Reginox Sinks

440

COMFORT DRAINER

ELITE DRAINER

Code R29657 440mm x 440mm

440

Code R29664 380mm x 442mm

442

DRAINERS & COLANDERS

380

PANAMA SPACE SAVING SYPHON

313 291

COLANDER

Code R37652 368mm x 135mm x 102mm

177 151

135

368

COLANDER

Code R01097 313mm x 177mm x 110mm

All threads 1 1/2 Max. 253

Code M2535

Ø40

170 - 360

More traditional shape

New shape means more storage room under your sink

Ø40

Integrated rubber valve

When water pushes through integrated rubber valve to one side to then be discharged into

Afterwards the rubber closes the trap again so that smells don’t linger and water doesn’t

Complete waste system with integrated rubber value which takes over the function from a standard trap. The Panama is suitable for both new and already installed sinks.

ww w.ikon.nz | 0800 83 83 84

Our

Handles

Our Handles | Minimal & decorative *ON SPECIAL!

MINIMAL HANDLES MINIMAL HANDLE

MINIMAL HANDLE

Length option 295mm 395mm

Code IKH1019 IKH1021

Length option 295mm 395mm

Code IKH1005 IKH1007

Finish: Anodized aluminum (matt) Material: Aluminum

MINIMAL HANDLE

Length option 295mm 395mm

Code IKH1023 IKH1025

Length option 295mm 395mm

Code IKH1027 IKH1029

Finish: Anodized aluminum (matt) Material: Aluminum

MINIMAL HANDLE

Length option 295mm 395mm

Code IKH1015 IKH1017

Finish: Anodized aluminum (matt) Material: Aluminum

Length option 295mm 395mm

Code IKH1061 IKH1063

Finish: Anodized aluminum (matt) Material: Aluminum

DECORATIVE HANDLES

*ON SPECIAL!

DECORATIVE HANDLE

Length option(mm) 180(L) | 170(C) 212(L) | 202(C)

Code IKH1057 IKH1051

Finish: Brushed nickel / Stainless steel Material: Aluminum

Code IKH1049 IKH1051

Finish: Brushed nickel / Stainless steel Material: Aluminum

DECORATIVE HANDLE Length option(mm) 180(L) | 170(C) 212(L) | 202(C)

Code IKH1045 IKH1047

Finish: Brushed nickel / Stainless steel Material: Aluminum

ww w.ikon.nz | 0800 83 83 84

Our Handles | Standard

STANDARD HANDLES

*ON SPECIAL!

STANDARD HANDLE Length option(mm) 170(L) | 160(C) 202(L) | 192(C)

STANDARD HANDLE Code IKH1031 IKH1033

Length option(mm) 135(L) | 128(C) 166(L) | 160(C) 198(L) | 192(C)

Finish: Brushed nickel / Stainless steel Material: Aluminum

STANDARD HANDLE Length option(mm) 183(L) | 160(C) 216(L) | 192(C)

STANDARD HANDLE Code IKH1041 IKH1043

Length option(mm) 180(L) | 160(C) 212(L) | 192(C)

Finish: Brushed nickel / Stainless steel Material: Aluminum

Code IKH1001 IKH1003

Finish: Brushed nickel / Stainless steel Material: Aluminum

Code IKH1053 IKH1055

Finish: Brushed nickel / Stainless steel Material: Aluminum

STANDARD HANDLE Length option(mm) 137(L) | 128(C) 166(L) | 160(C)

Code IKH1035 IKH1037 IKH1039

Our Handles

Our handles | Ikon Collection

Our

Ventilation

Ceiling unit: IK22

Steadfast Joinery | Dunedin

ww w.ikon.nz | 0800 83 83 84

Our Ventilation | Flow-In Not only for conventional kitchens but also island units, where it may not be possible to install a traditional extractor hood. Cooking odours are suctioned directly downwards from the hob into the extractor hood. Can be flushmounted into your worktop. The hood is easy to remove and provides direct access to the stainless steel filter which means easy cleaning.

FREE-FLOW 3416 Inox Extractor • • • •

• • • • •

Black tempered glass cooktop Touch and side controls 4 cooking induction hob surface Washable and easily cleanable internal chamber

Aluminium cassette filter (diswasher safe) 150mm outlet with 120mm converter Comes complete with remote motor Elegant and ergonomic design Benchtop cut out: 700 x 490mm 0 13 0 30

5 69

49 5 52 0

DOUBLE-FLOW 3417 Black & Inox Extractor

Black tempered glass cooktop Touch and side controls 4 cooking induction hob surface Washable and easily cleanable internal chamber

Aluminium cassette filter (diswasher safe) 150mm outlet with 120mm converter Comes complete with remote motor Elegant and ergonomic design Benchtop cut out: 700 x 490mm

FLOW-

FLOW-IN 3413.2

Diagr

Inox Extractor

• Black tempered glass cooktop • 4 speed • 4 zones • Surface induction • Touchscreen • Aluminium cassette filter (diswasher safe)

Cuttin

ams o

g size

f the

of the

counte

TECHN sides

rtop: 7

The ro ta helps tion of the e in xh the left guiding the aust air box air exh or the aust c right. onne

50 x 4

90 mm

• • • • • • •

IQUE

Timer function for all elements Cleaning indicator Plann Stainless steel filters ing an Can be recirculated d Mo unting Integrated flow-in extraction Can be flush mounted Benchtop cut out: 750 x 490mm

152

314 49

ction to

52 0

wards 38 2

Thank s the kit to the air fi lte c the ca hen, hence r, the purifi e binet or in th eliminating d air is red ire th e bas e, or d e risk of m cted into o amag es an isture in d mou ld. Base m (Solely otor for FLO Premiu W-IN In m tern Conne ): ction to of a ro th e m un oto of 150 d tube, with r by way m a with a m, exiting th diameter Our Ventilation flat du e moto ct of 2 The ro 22x89 r tation mm. of the directi mo on exhau s helps in pu tor in all st air. shing out

47 8

740

179

• • • •

• • • • •

0 73

Device

Op (Only in tional acce ss ulation Air circulatio ories nm to be m height: ounted ode 10cm), at the Con base Conne nection of th ction s e fl a t d izes = 222x8 uct 9mm

for lau

(Avera ge

nching

air circ

Our Ventilation | Flow-In INSTALLATION The hob and hood integrated in one body enables a practical installation. It can be ducted to the left or right from the exhaust air box.

PERFORMANCE The angled panels maximises the extraction

-TECHNIQUE

performance on both cooking zones and they hide the filter details to ensure minimal appearance.

Planning and Mounting

AND EASY TO CLEAN!

e sides Exhaust air box

op: 750 x 490 mm

Base motor

Naber ducting

Recirculating vent

Back of the cabinet

x onnection towards

7 21

5 38 2 25

Ø150

The exhaust air box connects to the ducting, this can be ducted either to the left or the right, depending on preference of cabinet layout.

Optional accessories 270mm (Only in Air circulation mode C at the Device for launching air circulation to be mounted base 19 35(Average height: 10cm), Connection of the flat duct 6 2 Connection sizes = 222x89mm

Ducting | Naber Ducting - Recommended | Page: 71

ay er 95

D 35 2

41,5

t the

Code: N404.3.003

Code: N404.3.004

Code: N404.3.001

Code: N404.3.006

Base motor

2 22 96 ,5

3,1

purified air is redirected into ng the risk of moisture in or damages and mould.

Exhaust air box

0,5 15

Connection to the motor by 150mm round ducting; exiting the motor with a flat duct of 222 x 89mm. The rotation of the motor fan helps push out the exhaust air through the flat duct.

be mounted flushmotor or laid on a stand. Base - Measurements ow the dimensions of the countertop:

Can be recirculated using Charcoal Filter Carbon Filter Bed

From the motor you can choose to either duct externally out or have a Charcoal Filter with Recirculating Vent. Device for launching air circulation to be mounted at the base

Code YM974.3413.03

with the charcoal filter, purified air is redirected into the kitchen, eliminating the risk of moisture damage and mould in the cabinet and base. Charcoal filters can be regenerated in the oven (200 °C/ 40min).

• Easy-clean induction cooktop • Horizontal touch control, LED display ssory mounting Cooktop- flush mounting • Safety lock • 9 Power levels - 4 times simultaneously usable • Bridge function for Left front and rear zones • Auto adapt | Auto stop | 4 residual heat indicators

• • • • •

Front left heating zone 210 x 177mm 1400/2000W (booster) Rear left heating zone 210 x 177mm 1400W (booster) Rear right heating zone 210 x 177mm Front right heating zone 210 x 177mm 1400W (booster) 7100W, total power consumption

ww w.ikon.nz | 0800 83 83 84

Our Ventilation Down drafts Downdraft extractors are a perfect solution for kitchen layouts where you can’t duct up. Ideal for those who have windows behind their cooking space. With a touch of a button, the extractor can be raised out of the bench top when needed and provides a powerful extraction solution while creating a modern and uncluttered look.

Down draft: IK63

Our Ventilation | Down drafts IK63 Code: 341185 Colour: Stainless Steel Downdraft

Considerations:

850mm Up to 900m3/hr 220-240v, 50Hz LED screen & remote control Four Varies on remote motor selected 150mm ducting required (not supplied) Stainless steel, dishwasher safe aluminium filters, cleaning Indicator, timer function, remote control • Instructions for installation, operation and maintenance, screws and brackets for mounting, remote control • Can be recirulated

REQUIRED | Remote motor | Page: 56

854

Can be ducted using Naber ducting from either side of the unit. Can be ducted using round ducting from the front and back

RECOMMENDED OPTION | Naber ducting | Page: 71

5 14

320 320

Supplied:

• • • • • • • • •

732

Size: Net capacity: Electicity supply & connection: Controls: Speeds: Illumination: Wattage: Ducting: Features:

780

IK56 Code: - 341080 - 80cm Colour: Stainless Steel & Black Glass Downdraft

Ducting: Supplied:

808

5 8. 11

0 25

320

800mm Up to 900m3/hr 220-240v, 50Hz LED screen & remote control Four 2x1.1 watt LED 250W Stainless steel, dishwasher safe aluminium filters, cleaning indicator, timer function • 150mm ducting required, can be recirculated using charcoal filters • Instructions for installation, operation and maintenance, screws and brackets for mounting, remote control

350

• • • • • • • • •

735

Size: Net capacity: Electicity supply & connection: Controls: Speeds: Illumination: Wattage: Features:

779

Naber ducting can be installed in the front, back or on the sides.

RECOMMENDED OPTION | Naber ducting | Page: 71

IK57 | Remote Motor Required 779

Supplied:

800mm Varies on remote motor selected 220-240v, 50Hz LED screen & remote control Four 2x1.1 watt LED Varies on remote motor selected 150mm ducting required Stainless steel, dishwasher safe aluminium filters, cleaning indicator, timer function • Installation instructions, operation and maintanace, screws and brackets for mounting and remote control

780 808

5 8. 11

320

• • • • • • • • •

735

Size: Net capacity: Electicity supply & connection: Controls: Speeds: Illumination: Wattage: Ducting: Features:

350

Code & Size: 341080WM - 80cm Colour: Stainless Steel & Black Glass Downdraft

320 91

Naber ducting can be installed in the front, back or on the sides.

REQUIRED | Remote motor | Page: 56

RECOMMENDED OPTION | Naber ducting | Page: 71

ww w.ikon.nz | 0800 83 83 84

Our Ventilation | Down drafts IK60 | Remote Motor Required Code & Size: 34110WM - 110cm Colour: Stainless Steel & Black Glass Downdraft

Supplied:

350

• • • • • • • • •

1100mm Varies on remote motor selected 220-240v, 50Hz LED screen & remote control Four 2x1.1 watt LED Varies on remote motor selected 150mm ducting required Stainless steel, dishwasher safe aluminium filters, cleaning indicator, timer function • Instructions for installation, operation and maintenance, screws and brackets for mounting, remote control

780 808

5 8. 11

320

735

Size: Net capacity: Electicity supply & connection: Controls: Speeds: Illumination: Wattage: Ducting: Features:

779

320 91

Naber ducting can be installed in the front, back or on the sides.

REQUIRED | Remote motor | Page: 56

RECOMMENDED OPTION | Naber ducting | Page: 71

REMOTE MOTOR Code: IK16 - 11250 Metal

Ducting:

Installation: Features:

• 266W x 521D x 335.5H • Up to 1400m3/hr • 42 (on lowest speed), 67 (on highest speed) dBA • 150mm ducting (in) and 200mm (out) required (not supplied) or 150mm with reducer • Roof cavity • Two motors, 4.5 metre cord

521

355.5

Size (mm): Net Capacity: Noise rating:

200

266

145 145

Can have 1 of 2 inward ducts (one can be blocked off)

Moving the motor away from the rangehood eliminates noise

1-2 metres

Ducted through external wall

IK16 Remote motor

Motor bracket

Our Ventilation

Naber Ducting

A unique feature in Naber ducing to gain better air flow and reduce noise

Ceiling unit

Our Ventilation Illumahoods

Illumahood Pure (Black)

ww w.ikon.nz | 0800 83 83 84

Our Ventilation Illumahoods

ALL THE BELLS AND WHISTLES Like all Ikon ranghoods, these units are packed with helpful features. These particular models come with a remote control, timer function (runs for 15 minutes) and they also tell you when the filters require cleaning.

STYLISH AND FUNCTIONAL With their powerful LED lighting, not only do they illuminate kitchens beautifully but they are also very efficient extraction units.

EASY INSTALLATION Just hang, plug in and they are ready to use. No ducting required, as they are reciculated.

IDEAL FOR ISLAND UNITS These extraction units are perfect for kitchen islands, or where you need some extra lighting. They do not require any ducting as they are recirulated, just run the discreet power cable up in to the ceiling cavity.

EASY TO CLEAN They have activated carbon filters that are easy to clean.

Illumahood: Pure (White) Windeatt 58Achitect | Waikato

Our Ventilation | Illumahoods Illumahood Neat (white)

ILLUMAHOOD NEAT Code: IK4385

470mm 650 min - 2000 max Up to 659m3/hr 220-240v, 50Hz

9 26

26 9 21 2

2 21

• • • • • • •

Touch control Four LED strip lighting (87 watt) 46-65 dBA 282W None. Recirculated using Charcoal Filters* Easy to clean charcoal filters, cleaning indicator, USB charging remote control, timer function • Instructions for installation, operation and maintenance, screws and brackets for mounting, remote control

4 35

35 4

502

Supplied:

• • • •

39.7

Size: Height: Net capacity: Electicity supply & connection: Controls: Speeds: Illumination: Noise rating: Wattage: Ducting: Features:

Illumahood Neat (black)

47 0

0 47

*Please note: Charcoal filters are a consumable item. They can be re-generated in the dishwasher without detergent (up to x10 times), but will eventually need to be replaced.

ILLUMAHOOD PURE

Illumahood Pure (Black)

Code: IK4386

Supplied:

502mm 650 min - 2000 max Up to 697m3/hr 220-240v, 50Hz

16 6.3

Ø220 166.3

• • • • • • •

Touch control Three x2 LED (2.5 watt) 46-65 dBA 282W None. Recirculated using Charcoal Filters* Easy to clean charcoal filters, cleaning indicator, USB charging remote control, timer function • Installation instructions , operation and maintenance, screws & brackets for mounting

30.9

• • • •

Ø332

380

Size: Height: Net capacity: Electicity supply & connection: Controls: Speeds: Illumination: Noise rating: Wattage: Ducting: Features:

Illumahood Pure (White)

2 Ø50

*Please note: Charcoal filters are a consumable item. They can be re-generated in the dishwasher without detergent (up to x10 times), but will eventually need to be replaced.

ww w.ikon.nz | 0800 83 83 84

Our Ventilation Ceiling units

INSTALLATION Installing your rangehood straight into your kitchen ceiling is a growing trend. With minimalism in mind, these types of rangehoods provide effective extraction power through targeted air extraction while taking up no additonal space.

NOISE CONTROL Some models can be used with a remote motor to minimise noise. Ceiling rangehoods are ideal for kitchen islands. These can be positioned up to three metres in height, however the higher from the cooking area, the less effective they are.

THE ONLY VIABLE OPTION Ceiling rangehoods are currently one of the only viable options when you want a freestanding oven and cooktop with a window behind but don’t have enough wall cavity space for a canopy/wall unit. Make sure to always discuss your extraction options with your kitchen designer before purchasing.

Ceiling unit: IK22

Steadfast Joinery | Dunedin

Our Ventilation | Ceiling units IK20W

Code: 14223W White tempered glass

Size: Height: Electicity supply & connection: Controls: Speeds: Illumination: Noise rating: Ducting: Features:

• • • • • •

LED indicators Three Four 3 watt LEDs Varies on remote motor selected 150mm ducting required (not supplied) Remote motor (required), remote control, split extraction - can be extracted throught top and sides, dishwasher safe aluminium filter • Instructions for installation, operation and maintenance, screws and brackets for mounting, remote control

700

0 120

180

Supplied:

• 1200mm • 180mm • 220-240v, 50Hz

6 115

654

REQUIRED | Remote motor | Page: 56 RECOMMENDED OPTION | Naber ducting | Page: 71

IK23B

Code: IK4386 Black tempered glass

Size: Height: Electicity supply & connection: Controls: Speeds: Illumination: Noise rating: Ducting: Features:

Supplied:

• 930mm • 115mm • 220-240v, 50Hz • • • • • •

LED indicators Four 20 x micro LEDs Varies on remote motor selected 150mm ducting required (not supplied) Remote control, remote motor (required), timer function, split extraction - can be extracted through top and sides, dishwasher safe aluminium filter • Instructions for installation, operation and maintenance, screws and brackets for mounting, remote control

486

890

115

930

REQUIRED | Remote motor | Page: 56 RECOMMENDED OPTION | Naber ducting | Page: 71

530

ww w.ikon.nz | 0800 83 83 84

Our Ventilation | Ceiling units

IK24 B/W

IK24B (black)

Code: 4229 B/W Tempered glass

Size: Height: Electicity supply & connection: Controls: Speeds: Illumination: Noise rating: Ducting: Features:

Supplied:

• 1000mm • 180mm • 220-240v, 50Hz • • • • • •

LED indicators Four Three 3 watt LEDs Varies on remote motor selected 150mm ducting (not supplied) Remote motor (required), remote control, timer function, split extraction - can be extracted through top and sides, timer function dishwasher safe aluminium filter • Instructions for installation, operation and maintenance, screws and brackets for mounting, remote control

IK24W (white)

Ø150

487,5 179 264

REQUIRED | Remote motor | Page: 56 RECOMMENDED OPTION | Naber ducting | Page: 71

165 165

179

1000

566

544

978

272

IK22 B/W

Code: 14227W Tempered glass

IK22W (white)

Supplied: Considerations:

• 1200mm - 1200W x 600D • 127mm • 220-240v, 50Hz • • • • •

LED indicators Three Varies on remote motor selected 150mm ducting required (not supplied) Remote motor (required), remote control, cleaning indicator, split extraction - can be extracted through top and sides, dishwasher safe aluminium filter • Instructions for installation, operation and maintenance, screws and brackets for mounting, remote control • No lights

58 8

8 118

127

REQUIRED | Remote motor | Page: 56 RECOMMENDED OPTION | Naber ducting | Page: 71

60 0

IK22B (black)

127

Size: Height: Electicity supply & connection: Controls: Speeds: Noise rating: Ducting: Features:

0 120

Our Ventilation

58 8

1188 1200

Our Ventilation | Ceiling units

IK25 B/W

IK25B (black)

Code: 4263 B/W Tempered glass

Size: Height: Electicity supply & connection: Net Capacity: Controls: Speeds: Noise rating: Illumination: Extraction: Features: Supplied: Considerations:

• 1000mm • 170mm • 220-240v, 50Hz • • • • • • •

Up to 750m3/hr (recirculating only) LED indicators Four 41 dBA (lowest speed). 5 dBA (highest speed) Strip LEDs Recirculating only - cannot be ducted Remote control, timer function, split charcoal extraction - can be extracted through sides, timer function dishwasher safe aluminium filter • Instructions for installation, operation and maintenance, screws and brackets for mounting, remote control • These units don’t sit flush against ceiling (170mm down)

IK25W (white)

4 15

0 20

5 14

16 0

700

8 27

5 16

5 14

100 0

17 0

8 23

170

4 19

8 23 5 16

00 10

70 0

IK21

Code: 14225 Stainless Steel

Size: Height: Electicity supply & connection: Net capacity: Controls: Speeds: Illumination: Noise rating: Ducting: Features:

• • • • • • •

Up to 850m3/hr LED screen Four Six 3 Watt LEDs 41 dBA (lowest speed). 57 dBA (highest speed) 150mm ducting required (not supplied) Remote control, N-RV system, dishwasher safe aluminium filter and timer function • Instructions for installation, operation and maintenance, screws & brackets for mounting, motor included

320

150

654 700

RECOMMENDED OPTION | Naber ducting | Page: 71

ww w.ikon.nz | 0800 83 83 84

320

250

Supplied:

• 1200mm • 400mm • 220-240v,50Hz

6 115 0 120

Our Ventilation Power packs

Power pack: IK48

Cube Dentro | Auckland

Our Ventilation | Power packs IK40 & IK41 Code: Stainless Steel

Speeds: Illumination: Noise rating: Wattage: Ducting: Features: Supplied:

IK40 | 117065 - 53cm

IK41 | 117095 - 79cm

24 5

238

Controls:

135

Cabnet size: Net capacity: Electicity supply & connection:

• (53cm) 530W x 310D x 238H | (79cm) 790W x 310D x 238H • (53cm) 60cm | (79cm) 90cm • 550m3/hr • 220-240v, 50Hz. Connected Power Cord with 3 pin plug suitable for standard 10 Amp G.P.O • Soft touch electric with digtal display screen • Three plus seperate ON/OFF button • Two 50 Watt 12V halogen • <54dBA - 59dBA • Motor: 220 Watt. Total Maximum: 320 Watts • 125mm ducting required (not supplied) | Can be recirculated using charcoal filters • Delay timer and cleaning indicator • Installation instructions, operation and maintenance, screws for mounting and a one way butterfly valve

Size:

9 19 75 0

8 25

790

0 31

MOTOR CONSIDERATIONS | Motor is supplied and can’t be placed remotely Naber ducting | Page: 71

IK77 & IK78

Code: IK77 & IK78 Stainless Steel Size: Cabnet size: Net capacity: Electicity supply & connection: Controls: Speeds: Illumination: Noise rating: Wattage (W): Ducting: Features: Supplied:

• (53cm) 530W x 310D x 252.5H | (79cm) 790W x 310D x 250H • (53cm) 60cm | (79cm) 90cm • Up to 750m3/hr • 220-240v,50Hz. Connected power cord with 3 pin plug suitable for standard 10 Amp G.P.O • Soft touch electronic with digital display screen • Five plus seperate ON/OFF button • 53cm - Two 1 Watt 12V LED | 79cm - Four 1 Watt 12V LED • 54dBA - 59dBA • Motor: 220 Watt Total Maximum: 53cm 230 Watts | 79cm - 240 Watt • 150mm ducting required (not supplied). Can be recirculated using charcoal filters • Delay timer , cleaning indicator, remote control • Installation instructions, operation and maintenance, screws for mounting and a one way butterfly valve

IK77 | 53cm

IK78 | 79cm

247

252

250 47

21 506 261

7 790 30

530 310

261

MOTOR CONSIDERATIONS | Motor is supplied and can’t be placed remotely REMOTE MOTOR | RECOMMENDED OPTION | Naber ducting | Page: 71

ww w.ikon.nz | 0800 83 83 84

310

Our Ventilation | Power Packs IK46 (black)

IK46 & IK47

Code: IK46 - 1176B60 | IK47 - 1176W60 Tempered glass

Features: Supplied:

• 530W x 287D x 400H • 60cm • 220-240v, 50Hz

IK47 (white)

• • • • • •

Up to 750m3/hr Touch control Four 54-59dBA 3 x 1W LED lighting 150mm ducting required (not supplied). Or can be recirculated using charcoal filters • Remote control, cleaning indicator, timer function, aluminium filters • Installlation instructions, operation and maintenance, screws, brackets for mounting and a one way butterfly valve

257

IK48 & IK49

• 790W x 287D x 400H • 90cm • 220-240v, 50Hz

IK49 (white)

Up to 750m3/hr Touch control Four 54-59dBA 3 x 1W LED lighting 150mm ducting required (not supplied. Or can be recirculated using charcoal filters • Remote control, cleaning indicator, timer function, aluminium filters • Installlation instructions, operation and maintenance, screws, brackets for mounting and a one way butterfly valve

• • • • • •

Our Ventilation

7 25

28 0

776 2 790

MOTOR CONSIDERATIONS | Motor is supplied and can be placed remotely but will require a conversion kit | code YM970.1176.01 RECOMMENDED OPTION | Naber ducting | Page: 71

76 5 2 0 2 79 053 0

400

Supplied:

0 26 87 2

IK48 (black)

Code: IK48 - 1176B90 | IK49 - 1176W90 Tempered glass

Features:

502 530

MOTOR CONSIDERATIONS | Motor is supplied and can be placed remotely but will require a conversion kit | code YM970.1176.01 RECOMMENDED OPTION | Naber ducting | Page: 71

Size (mm): Cabnet size: Electicity supply & connection: Net Capacity: Controls: Speeds: Noise rating: Illumination: Ducting:

280

400

Size (mm): Cabnet size: Electicity supply & connection: Net Capacity: Controls: Speeds: Noise rating: Illumination: Ducting:

0 26 87 2

Our Ventilation | Power packs IK79.6 & IK79.9

Code: IK79.6 - 11175 | IK79.9 - 11177 Stainless Steel & Black Tempered glass

Ducting: Supplied: Features:

400

• Up to 950m3/hr (Large extraction) • Soft touch electronic LED with digital display screen • Nine • 54-59dBA • 53cm - Two 2 Watt LED | 79cm - Four 3 Watt LED • 150mm ducting required (not supplied). Can be recirculated using charcoal filters • Installlation instructions, operation and maintenance, screws, brackets for mounting motor and a one way butterfly valve • EBM life-long motor, remote control, cleaning indication, split extraction, N-RV system, dishwasher safe filters, motor can be placed up to 6 metres away (cables supplied) • 224W / 232W

0 0

IK79.6 | 53cm

IK79.9 | 79cm

..55 225566

6.5

Wattage: Features:

IK73 | 53cm

IK74 | 79cm

24 7

247

252.5

Supplied:

Speeds: Illumination:

• (53cm) 530W x 310D x 252.5H | (79cm) 790W x 310D x 250H • (53cm) 60cm (79cm) 90cm • 220-240v, 50Hz. Connected power cord with 3 pin plug suitable for standard 10 Amp G.P.O • Soft touch electronic with digital display screen • Five plus separate ON/OFF button • (53cm) Two 5 watt 12V LED (79cm) Four 5 Watt 12V LED • Installlation instructions, operation and maintenance, screws, brackets for mounting motor and a one way butterfly valve • Refer to remote motor • Delay timer, remote control and cleaning indicator

Controls:

400

Code: IK73 | IK74 Stainless Steel

Cabinet size: Electicity supply & connection:

Size (mm):

MOTOR CONSIDERATIONS | Motor is supplied and can be placed remotely RECOMMENDED OPTION | Naber ducting | Page: 71

IK73 & IK74

Wattage:

400

Speeds: Noise rating: Illumination:

Cabnet size: Electicity supply & connection: Net Capacity: Controls:

• (53cm) 530W x 295D x 400H | (79cm) 790W x 295D x 400H • (53cm) 60cm | (79cm) 90cm • 220-240v, 50Hz

400 400

Size (mm):

6.5

5 53 06 0

261 0 31

73 790 0

261

MOTOR CONSIDERATIONS | Remote Motor Required | Page: 56 RECOMMENDED OPTION | Naber ducting | Page: 71

ww w.ikon.nz | 0800 83 83 84

310

Our Ventilation | Slide out IK35

Code: IK35 Stainless Steel & Black Glass

Net Capacity: Controls: Speeds: Noise rating: Illumination: Ducting: Supplied:

Wattage:

• 500W x 280D x 176H • 60cm • 220-240V, 50Hz. Connected power cord with 3 pin plug suitable for standard 10 amp G.P.O • Up to 500m3/hr • Touch control and remote control • Three • <54dBA (measured at the highest speed) • Two 25 Watt Halogen • 125mm ducting required (not supplied). Can be recirculated using charcoal filters • Installlation instructions, operation and maintenance, screws, motor, brackets for mounting and a one way butterfly valve • Total 270W

28 0

0 50

136

Size (mm): Cabnet size: Electicity supply & connection:

Mi n3 05 -

MOTOR CONSIDERATIONS | Motor is supplied and can’t be placed remotely RECOMMENDED OPTION | Naber ducting | Page: 71

Our Ventilation

0 60 Ma x4 75

Our Ventilation | Canopy units IK65

Code: 3170.9 Stainless Steel

2 26

25 0

400

800m3/hr Soft touch screen Five 54-63dBA Two 3 Watt LED 250W 150mm ducting required (not supplied). Can be recirculated using charcoal filters • Installlation instructions, operation and maintenance, screws, brackets for mounting and a one way butterfly valve • Dishwasher safe aluminium filters, cleaning indicator, NRV system, timer function Min 660 - Max 1060

Features:

• • • • • • •

80 20

Supplied:

• 898W x 500D x 660HMin - 1060HMax • 220-240v, 50Hz

600

Size (mm): Electicity supply & connection: Net Capacity: Controls: Speeds: Noise rating: Illumination: Wattage: Ducting:

8 89

50 0

IK52

Code: (53cm) 12120.6 | (90cm) 12120.9 Stainless Steel

60cm 165

250

500

Min 750 - Max 1250

165

500 80 20

0 20

500 80 20

0 20

90cm

500

Wattage: Fatures:

Up to 800m3/hr Soft touch control Five 54-63dBA Two 3 Watt LED (60cm) 125mm ducting required (90cm) 150mm ducting required (not supplied). Can be recirculated using charcoal filters • Installlation instructions, operation and maintenance, screws, brackets for mounting and a one way butterfly valve • 250W • Timer function, dishwasher safe aluminium filters, NRV system

Min 750 - Max 1250

Supplied:

• • • • • •

250

Electicity supply & connection: Net capacity: Controls: Speeds: Noise rating: Illumination: Ducting:

• (60cm) 598W x 500D x 750H -1250H | (90cm) 898W x 500D x 750H -1250H • 220-240v, 50Hz

Size (mm):

500

ww w.ikon.nz | 0800 83 83 84

8 59

550000

898 598

Our Ventilation | Canopy units IK82

Code: (60cm) 13155.6 | (90cm) 13155.9 Stainless Steel

60cm

90cm 2 26

25 0

20 500

Min 610 - Max 1010

500

Min 580 - Max 980

25 0

2 26

Features:

Up to 800m3/hr Soft touch control panel Five 47.4 dBA(lowest speed), 69.6 dBA(highest speed) Two 3 Watt LED 250W 150mm ducting required (not supplied). Can be recirculated using charcoal filters • Instructions for installation, operation and maintenance, screws and brackets for mounting • Tempered glass, NRV system, dishwasher safe filter, cleaning indicator, timer function

0 44 8 59

50 0

110

Supplied:

• • • • • • •

400 80

Electicity supply & connection: Net Capacity: Controls: Speeds: Noise rating: Illumination: Wattage: Ducting:

• (60cm) 598W x 500D x 580HMin - 980HMax (90cm) 898W x 500D x 610HMin - 1010HMax • 220-240v, 50Hz

400 80

Size (mm):

0 62 8 89

50 0

IK71

Code: (60cm) 13173.6 | (90cm) 13155.9 Stainless Steel

60cm

2 26

600

Min 660 - Max 1060 60

50 0

Our Ventilation

25 0

400

25 0

400

2 26

90cm

Wattage: Features:

Up to 800m3/hr Soft touch screen Five 54-63dBA Two 3 Watt LED 150mm ducting required (not supplied). Can be recirculated using charcoal filters • Installlation instructions, operation and maintenance, screws, brackets for mounting and a one way butterfly valve • 250W • Timer function, dishwasher safe aluminium filters, NRV system, cleaning indicator, timer function

Supplied:

• • • • • •

600

Electicity supply & connection: Net capacity: Controls: Speeds: Noise rating: Illumination: Ducting:

• (60cm) 598W x 500D x 660HMin-1060HMax | (90cm) 898W x 500D x 660HMin -1060HMax • 220-240v, 50Hz

Min 660 - Max 1060

Size (mm):

8 59

50 0

8 89

Our

Ducting

Ducting can make a significant impact to the performance of a Rangehood.

How far can I duct? The maximum from the unit to the motor is 2 metres and from the motor to the external exit we recommend no more than 7 metres (the less the better). For every bend reduce the overall distance by 1 metre (For example with 2 bends this would then change the recommended total to 5m ducting). If you have any questions about our ducting options, please contact us at 0800 83 83 84 - We would love to help.

TURBO 150 WALL CONDUCT

THERMOBOX 150

code N404.3.071

code: 404.3.064

• Hose/pipe connection Ø 150 o. mm • External blind Ø 180 mm • Installation depth 350–500 mm, nozzle depth 24 mm • Wall penetration Ø ca. 155 mm • Blower-Door certified (required opening pressure >65 Pa)

• Up to 20 times less heat loss (compared to standard backflow traps) • Efficient thermal insulation of the exhaust opening • Heat insulating reflective layer • U-value* of only 2,2 W/(m2K) • Can be retrofitted in existing Naber wall conducts

Ø147

ENERGY EFFICIENT EXHAUST SOLUTIONS IN THE KITCHEN Our Naber Thermobox has been approved for passive homes as they prevent flow and heat loss when the vents are closed. A little accessory with great benefits when it comes to this relatively new way of designing and building homes.

ww w.ikon.nz | 0800 83 83 84

Our Ducting | Naber ducting VENTS NABER VENT

NABER VENT

code N402.2.038 Stainless steel

code N402.2.012 Stainless steel

• Vent louvred SS for flow 150mm

• Vent louvred SS for round 150mm

Pairs with 150mm flat ducting

Pairs with 150mm round ducting

NABER VENT

code N404.4.044 Plastic

code N404.4.045 Plastic

• Vent louvred 150 brown for round

• Vent louvred 150 white round Pairs with 150mm round ducting

Pairs with 150mm round ducting

FLAT DUCTING -550 250

NABER DUCT

code N404.3.042 Pipe bend

NABER DUCT

code N404.3.001 Flat pipe

• Semi Rigid Rectangular to Rectangular 150mm pipe bend

• Flow 150 flat duct pipe 1000mm

NABER DUCT

code N404.3.004 Flat bend • Flow 150 flat pipe bend vertical 90 degree

Pairs with 150mm flat ducting

code N404.3.007 Flat bend • Flow 150 flat pipe bend horizontal 15 degree

NABER DUCT

MOUNTING BRACKET

code N402.3.005 White plastic

code N404.3.019 Mounting bracket

• Flow 150 flat pipe connector

• Flow 150 flat duct mounting bracket

Our Ducting

Our Ducting | Naber ducting & Ducting kits ROUND TO FLAT DUCTING *42

NABER DUCT

Fits outside flat ducting

code N404.3.058 Wall Plate

148

• Wall plate flow 150 flat duct

184

NABER DUCT

code N404.3.002 White plastic

• Flow 150 deflector 90 degree (bend round to flat)

NABER DUCT

code N404.3.006 Flat to round

code N404.3.043 Pipe bend

• Flow 150 flat-toround connector

• Semi Rigid Round to Rectangular 150mm pipe bend

ROUND DUCTING NABER DUCT

NABER DUCT

• Flow 1250 pipe round 1000mm long

• Flow 150 flat pipe connector

code N405.2.102 Round Pipe

code N405.2.015 Pipe bend

NABER DUCT

code N405.2.017 Connector • Flow round 150 pipe and hose connector

DUCTING KITS DUCTING KIT FOR EAVE Ducting kit for eave • Includes 3M of semi-rigid ducting, 2 clips and outlet

RHK125E | 125mm

RHK150E | 150mm

RHK200E | 200mm

DUCTING KIT FOR WALL Ducting kit for eave • Includes 3M of semi-rigid ducting, 2 clips and outlet

DUCTING KIT FOR ROOF Ducting kit for roof • Includes 3M of semi-rigid ducting, 2 clips and outlet

RHK150T | 150mm

RHK200T | 200mm

HOSE CLAMP

RHK125W | 125mm

code N402.1.133 Stainless steel

RHK200W | 200mm

• Hose clip for 150mm round pipe

RHK150W | 150mm

RHK125T | 125mm

ww w.ikon.nz | 0800 83 83 84

Our Terms and conditions | General warranty GENERAL INFORMATION: Supply of goods is subject to Ikon® Commercial Ltd terms of trade. Current Terms of Trade are available from the website or from contacting Ikon. All Flow-In products require payment before dispatch. For hassle free warranty on all appliances please supply customers name, phone number, address and email address with these orders. While every effort is made to check our products we recommend all products, measurements and colour matches be checked against the actual product to be installed. Colour swatches are used as a guide only and we will not be responsible for any colour changes from one batch to another. Please ensure your customer is happy before installing. Distributors, agents and retailers have no authority to bind Ikon to any decision regarding supply or warranty claim nor any products fitness for particular use. Title of goods will remain with Ikon® Commercial until paid for in full. FREIGHT POLICY: All products except accessories are shipped free of charge to anywhere in New Zealand. Allow 2-3 working days for delivery outside of central Auckland and Hamilton. Please ensure all product is checked before signature is given to the courier. To submit a claim, please ensure you notify us within 48 hours of receipt of product. RETURNS POLICY: All returns must be approved by customer services. Please contact us on 0800 83 83 84 for us to issue an RA number for return of The Product. Products returned without an RA number will not be accepted for credit and returned at your cost. There will be no returns for Kleenmaid and Ikon appliances unless special circumstances apply. In these cases a freight charge will apply on top of a restocking fee. No returns will be accepted after 3 months from order date. Any product modified for the customer, cannot be returned. Warranty starts from the date in which the product is invoiced. A copy of the invoice is required before warranty is undertaken. If you have a warranty enquiry for our products contact us directly on 0800 83 83 84, for greater efficiency and accuracy. If we can not find the invoice through our system, we may contact you to request it. For New Zealand customers: Please remember that the warranties on offer from Ikon are offered to you, the consumer, as a “manufacturers warranty”. You may still have rights or remedies under the Consumer Guarantees Act that are not defined in our “standard warranties”. Nothing in our warranty documentation or any other document can remove any rights you have under the CGA. For further information you can visit: www.consumerprotection.govt.nz

Ikon Commercial Limited (Ikon), as a New Zealand importer, hereby warrants (subject to the exclusions and conditions set out below) to the consumer (The Consumer) of the brands of sinkware supplied directly or indirectly by or from Ikon that the product (The Product) shall be free from manufacturing defects in materials or workmanship from the date of original purchase of The Product from Ikon or from the retailer (as the case may be). Subject to the below mentioned exclusion and conditions, the obligations of Ikon under this warranty shall be limited to either of the following (at Ikon’s sole option): 1. To without charge repair or replace the defective product (or the defective parts there of) and to reinstall the repaired or replaced product (or to pay reasonable costs of installation): or 2. To refund the Consumer the original purchase price for the defective products: AND such repair, replacement or refund shall costitute fulfilment of all of Ikon’s obligations under this warranty. To the extent permitted by law Ikon will not whether by virtue of this warranty or otherwise be liable for and hereby disclaim any liability for any incidental, economic or consequential loss, expenditure or damage, directly or indirectly suffered by the Consumer or any other person in respect to any defect in the Product. This warranty does not apply if: 1. The Product has been installed, used or cared for in any improper manner or otherwise contrary to any specifications, instructions or recommendations contained in any brochure or materials supplied on the original purchase of the product. Ikon will not be liable for replacement of a benchtop when products have been undermounted into laminate, as this goes against Ikon’s recommendations. 2. Any attempt is made to repair or modify the product in any way by any person without written authority of Ikon. 3. Installation of The Product has occurred without regard to the installation instruction provided and full consideration is given to all regulatory codes covering electrical, gas and plumbing installations. 4. That this warranty does not extend to: a) light globes and filters of any ages on rangehoods; b) transportation or travelling costs involved in the repair when The Product is installed outside in rural areas. c) damage to the ceramic glass caused by liquid or solid spillover, lack of maintenance or impact; d) damage to surface coatings caused by cleaning or maintenance, using products not recommended by the owners handbook; e) defects caused by normal wear and tear, accident, negligence, alteration or misuse, and “act of God”

Our Terms of trade

Our Terms and conditions | General warranty f) The Product is not in the possession of the original Consumer; g) The Product has been dismantled, repaired or serviced by anyone other than an authorised Ikon service person. 5. All stainless steel sinks must be bonded to the general mass of earth. In situations where it is not required for electrical compliance it must be done for the purpose of equipotential bonding. 6. A claim under this warranty is not notified in writing to Ikon within a reasonable period after the defect in the Product would have become apparent to a reasonable person. If a service call is required and it is not a result of either faulty materials or workmanship, then Ikon or the service agent will charge the customer directly for the service call out. All warranties must go through the approved warranty process. No warranty claims may be expressed or implied by any party other than the warranty claims handler from Ikon. Any claim under this warranty must be made in writing to Ikon (info@ikon.nz) and must be supported by reasonable evidence of the date of original purchase of The Product and suspected defects in The Product must be made available for inspection by Ikon or it’s authorised representatives.

Ikon sinks Stainless steel sinks Copper & brass sinks Quartz arcrylic granite

Warranty Lifetime (50 years) 5 years 10 years

Ikon appliances / Other Instant hot water taps Tapware (series 2) Handles Air switch Rangehoods / hobs Ducting

2 years 2 years 12 months 12 months 2 years 12 months

Kleenmaid All kleenmaid appliances

3 years

Reginox Stainless steel Amsterdam collection Commercial collection Coloured stainless steel

Lifetime (50 years) 5 years 10 years 5 years

Please refer to our website for the most up to date information around warranties and stock availablity. www.ikon.nz

Nothing in this product warranty shall override or negate any statutory right or remedy that may be available to The Consumer under the Consumer Guarantees Act 1993, except where The Consumer has acquired product for the purposes of business or commercial use. Official decisions will always be made in writing once a claim is fully investigated. Please refer to our website for latest updates and warranty conditions. 7. All Ikon products dispatched will have manuals and installation instructions included, please make sure these are read and retained. If these are missing from your product please contact your supplier/installer or download these from our website. Disclaimer Ikon Commercial Limited, is constantly seeking ways to improve the specifications, design and production of the Product. Alterations take place continually. Whilst every effort is made to produce up to date literature, brochures should not be regarded as an infallible guide to the current specifications, nor does it constitute an offer for the sale of any particular Product. Product cutouts indicated in our literature are indicative only. Actual examples of the Product should only be used to define cutout sizes. Distributors, agents and retailers have no authority to bind Ikon by any express or implied undertaking or representation.

ww w.ikon.nz | 0800 83 83 84

We are 100% New Zealand owned and operated and take pride in our customer service.

Our phone

0800 83 83 84

Our email

info@ikon.nz

Our showroom

18 West Street, Hamilton

Our website