Incorporating
Large Direct Acting Solenoid Valves for Process on/off control
Key Features and Benefits » Direct Acting – no air/hydraulic pilot required » SIL 2 with proven in use data » Solenoid operated, all in one solution No separate actuator required » Fast Acting » Light, compact and low powered compared to MOVs » Long service life » Compliant to PED directive The SOV series gives users optimum safety, reliability and performance whilst offering the lowest cost of ownership Energy
SOV Series Our globally certified and SIL rated direct acting SOV valves have been installed in energy applications since the 1950’s. The simple design means there is no requirement for external pilot or vent lines giving huge benefits over actuated packages and force lift valves. The valves are simply installed in the process line and connected to the control system for both ease of installation and a reduced installation cost.
SIL 2/3 certified (SIL 3 in redundancy)
Response time <100ms
Certified for: ATEX, IECEx, CRN, TR CU, IN-METRO and CCOE
Find out more norgren.com
Its simple design ensures high reliability, long service intervals and with optimised magnetics, very quick reaction times. The durability of construction means that they can control a wide variety of media including sweet & sour gas, corrosion inhibitors, liquid fuels, lubricants and oil.
Integrated switches for proof of open/closure
Up to 449 bar (6,512 psi) pressure
Dual coil for reduced power consumption
-40°C to +150°C (-40°F to +201°F) Temperature Rating Wide range of material choice including exotic alloys ½” to 4” threaded and flanged connections with up to 165 Cv Automatic, manual reset and override options available
Large direct acting SOV’s are used in many direct process line applications such as Critical ESD, HIPPS, Chemical Injection, Fire Systems as well as pilot valves to actuators on larger gas and steam turbine applications such as steam turbine trip valves.