AUDIO FOR EVERYONE
www.brooke-products.com
Audio for everyone
INH
AUDIO FOR EVERYONE
INSTALL ‘N’ HIRE SPEAKERS AND SUBWOOFERS Install ‘N’ Hire speakers meet and exceed the needs for both professional Fixed Installations and Audio Equipment Hire. Whilst lightweight & robust enough for the Hire market, INH Plywood cabinets offer superb audio peformance and the wide range of fixing options to suit Installations especially well.
Flexibility & Strength
Installation speakers need to be flexible enough install to a wide range of surfaces, but at the same time strong enough to cope with these different fixing methods. Cabinets are fully compatible with industry standard Powerdrive™ wall or ceiling brackets, and can be easily “flown” with wires. The internal strength of the cabinets must be uncompromising both in these situations. The INH Plywood
range work equally well as frontof-stage monitors or in a ground mounted floor stack. Finally, each cabinet comes complete with a 35mm top-hat on the base for use with subwoofers or tripod stands.
Top Sound
No matter how well speakers are made, they must deliver superb sound. These INH speakers are made from high quality plywood, rather than cheaper chipboard
or MDF. Each driver is optimised for the best possible sound and efficiency then crossovers and cabinet volumes are fine-tuned to give breathtaking performance. This can all be achived without breaking the bank.
Professional Speaker Cabinets
Speakers have to look great, but remain unobtrusive. Most installations require speakers
INH-8 8” Speaker
INH-10 10” Speaker
INH-12 12” Speaker
INH-15 15” Speaker
Frequency
70Hz - 20KHz
65Hz - 20KHz
65Hz - 18KHz
55Hz - 18KHz
Impedance
8Ω
8Ω
8Ω
8Ω
Power RMS
200W
250W
300W
600W
Sensitivity
93dB
95dB
97dB
101dB
Max SPL
116dB One 8” Bass with One 1” Tweeter
120dB One 10” Bass with One 1” Tweeter
125dB One 12” Bass with One 1” Tweeter
130dB One 15” Bass with One 1” Tweeter
Driver(s) Inputs
2 x Neutrik Speakon®
Mounting
Floor, 35mm top-hat
Enclosure Dimensions mm
Easy to Connect
Neutrik Speakon® sockets on the rear of the units ensure compatibility with standard connections from external amplifiers.
High Density 18mm Black Ply 455 x 295 x 270
530 x 355 x 320
575 x 400 x 370
700 x 470 x 445
14.0kg
17.0kg
21.0kg
32.0kg
INH-15S 15” Subwoofer
INH-18S 18” Subwoofer
18” No Grille Subwoofer
Frequency
50Hz - 250Hz
45Hz - 250Hz
45Hz - 250Hz
Impedance
8Ω
8Ω
8Ω
Power RMS
500W
600W
600W
Sensitivity
98dB
100dB
100dB
Max SPL
112dB
116dB
116dB
Driver(s)
15” Bass
18” Bass
18” Bass
Weight
that blend into the background using them to simply deliver high quality sound - not be the focus of attention. However, cabinets will still be visible to the public, so they must look the part.
SUBWOOFER SPECIFICATIONS
Inputs
INH-18SNG
2 x Neutrik Speakon®
Mounting
Floor, 35mm top-hat
Enclosure
High Density 18mm Black Ply
Dimensions (mm) Weight (kg)
445 x 670 x 570
530 x 600 x 780
530 x 600 x 780
23.0
43.0
43.0
www.brooke-products.com
TM
Audio for everyone
XPRO
2
AUDIO FOR EVERYONE
PASSIVE / ACTIVE SPEAKERS & SUB WOOFERS The Brooke X-Pro™ series of amplifiers and loudspeakers became our best selling range when we launched them in 2008. They are installed in hundreds of venues throughout the UK and are a firm favourite among installers and retailers nationwide. During this time we spoke to many of our customers and asked them for suggestions for a new range. We are now delighted to announce the brand new 2015 X-PRO2™ range, the latest version. All the key X-PRO™ values are preserved, clear crisp sound, high reliability and robust cabinets made from slow growing plywood – all at a super price. The 2015 range comprises of 10”, 12” 15” top boxes along with our 15”, 18” and 2x18” X-PRO2™ subs. They can be used
Frequency Directivity Angle
as a front of house PA, localised in-fill reinforcement and portable applications for bands, discos, entertainers etc.
amplifier modules, stock levels and inventory costs are kept low, whilst being able to offer your customers a range of passive and active options. Hire companies too can add or remove amplifiers as required, ensuring an extensive hire list with low stock costs.
The most exciting feature of X-PRO2™ is the upgrade path that takes a passive top box and converts it into an active speaker. This is a superb option for installers and retailers alike. By stocking the standard passive speakers and holding a few
Speakers can be ordered as active or passive and amplifier modules can be ordered separately for
those wishing to carry out the rapid upgrade as required. We call this exclusive feature “BROOKE ACTIVATE™” and will carry the “ACTIVATE THE POWER™” logo. Originall launched at BPM & PRO AUDIO show, a full selection of stock is now available. Please contact Impact products, exclusive UK distributor for Brooke Pro Audio on 01604 664571
X-PRO²-10 10” Speaker
X-PRO²-12 12” Speaker
X-PRO²-15 15” Speaker
X-PRO²-15S 15” Subwoofer
XPRO²-18S 18” Subwoofer
XPRO²- Twin 18S 18” Twin Subwoofer
58Hz - 18KHz
57Hz - 18KHz
45Hz - 18KHz
40Hz - 250Hz
35Hz - 250Hz
32Hz - 250Hz
H90° x V50°
H90° x V80°
H90° x V50°
-
-
-
Impedance
8Ω
8Ω
8Ω
8Ω
8Ω
4Ω
Power RMS
250W
350W
700W
700W
700W
1400W
Power Peak
500W
700W
1400W
1400W
1400W
1400W
Sensitivity
97dB
98dB
102dB
98dB
99dB
104dB
Max SPL
97dB One 10” Bass with One 1” Tweeter
99dB One 12” Bass with One 1” Tweeter
104dB One 15” Bass with One 2” Tweeter
123dB
125dB
132dB
1 x 15” Bass
1 x 18” Bass
2 x 18” Bass
Driver(s) Inputs
2 x Neutrik Speakon
Mounting
Floor, 35mm top-hat
®
Enclosure Dimensions (mm) Weight (kg)
High Density 18mm Black Ply 489 x 300 x 261
580 x 375 x 325
675 x 435 x 390
690 x 460 x 465
690 x 560 x 571
1066 x 560 x 750
16.0
22.0
31.0
34.0
44.0
71.0
AMPLIFIER SPECIFICATIONS X-PRO 10 AMP Fits 10” Speaker Output Power THD @ 1KHz & 1dB below clipping Hum & Noise
300W @ 8Ω 0.50%
X-PRO 12/15 AMP Fits 12” & 15” Speaker 600W @ 8Ω 800W @ 4Ω 0.70%
90dB
92dB
35V / uS
35V / uS
Damping Factor
200
200
Input Connector
XLR Combo
XLR Combo
XLR Male
XLR Male
Slew Rate
Loop Thru Connector Limit & Clip Indictator
Red LED
Red LED
Power ON indictator
Green LED
Green LED
Treble / Bass EQ
YES
YES
Mic / Line Switch
YES
YES
240V / 50Hz
240V / 50Hz
YES
YES
235 x 120m
320 x 150
0.95
2.05
Operating Voltage Soft Start Dimensions (mm) Weight (kg)
www.brooke-products.com
Audio for everyone
B-MAX
AUDIO FOR EVERYONE
VERSION 2 ANALOG PROFESSIONAL AMPLIFIERS The Brooke X-Pro™ series of amplifiers and loudspeakers became our best selling range when we launched them back in 2008. They are installed in hundreds of venues throughout the UK and are a firm favourite among installers and retailers nationwide. Brooke Xpro amplifier models are all 480mm deep and are available in the two popular versions: the XPRO 1800 delivering up to 1800 watts and the XPRO 3000 delivering up to 3000 watts, both housed in a 3U high rackmount case and feature: recessed variable gain twin front panel controls; 8 LED status indicators; selectable
High Power Amplifiers
input sensitivity; XLR balanced line inputs and line outputs; terminal post and locking connectors for loudspeaker connection; stereo, mono and bridge mode operation; switchable audio filters; ergonomic handles and metal case with rackmount ears.
generating this massive energy the instant it is needed would require unfeasibly large supplies of mains power. So our engineers have taken a tried and trusted method of holding massive quantities of energy without the need for industrial sized mains supplies.
Many venues demand earthquake-like bass, delivered cleanly and repeatedly, hour after hour, night after night. Many of today’s large sub-bass loudspeakers are capable of this performance, but only if they are driven by an amplifier with massive instantaneous power delivery. But
B-MAX 1060 2 x 530W Amplifier
B-MAX 1680 2 x 840W Amplifier
B-MAX 2300 2 x 1150W Amplifier
B-MAX 4000 2 x 2000W Amplifier
8Ω, 1KHz, RMs, Stereo
2 x 350W
2 x 550W
2 x 750W
2 x 1200W
4Ω, 1KHz, RMs, Stereo
Output Power 2 x 530W
2 x 840W
2 x 1150W
2 x 2000W
Bridged mono 8Ω
1060W
1680W
2800W
4000W
Parallel 2Ω
1060W
1680W
2800W
4000W
Output Connections
2 Speakon for Stereo Bridge Output
Input Impedance
20kΩ / Balanced, 10kΩ / Un-balanced
Input sensitivity
>20kΩ
0.77V
Crosstalk
62dB
<-80dB
THD
<0.03%
>0.1% / 450W
SN Ratio Crosstalk @ Rated Output 8Ω/1KHz
>98dB
>100dB 62dB
Slew Rate Damping Factor Frequency Response
15V / uS
>60V / uS
>230
>300
20Hz-20kHz, ±1dB
20Hz-30kHz
Cooling System
TWO steps speed fan
Power Supply
AC : 220V / 240V 50Hz / 60Hz
Dimension (mm) Net Weight (kg)
(2U) 482 x 460.5 x 88 13.7
16
(3U) 484 x 555 x 132 18.3
38
www.brooke-products.com
AUDIO FOR EVERYONE
Reliable, Desirable, Affordable Brooke™ has gained an enviable reputation for performance, quality and reliability in its amplifier and loudspeaker systems. The UK design team have achieved a striking balance between rugged products and competitive prices. From our entry level ABS speakers right up to our stadium line array, Brooke™ offers a unique range for almost any venue. Best of all, Brooke™ also matches your budget at a time where value for money is everything. Our range includes updated drivers in many models, offering improved response and better overall performance. The lightweight amplifier range is extended to offer more new models and our active loudspeakers are proving a great success with our demanding customers. The legendary Brooke™ INH range, developed specifically for the Install and Hire market is packed with features, making INH our best selling range. Whatever your requirement, whatever your venue, you can rely on Brooke for the answer - at a price you and your clients can afford.
Distributed by:
www.brooke-products.com www.facebook.com/BrookeProducts ©2015 Brooke Products (Europe) Ltd. We have a policy of continual product development and the information contained herein may not reflect the latest version available for sale. This information and specification should be used as an indication only and it is the buyer’s sole responsibility to ensure any product offered for sale will properly meet the buyer’s requirements before making a purchase. E&OE.
28/08/15