PROGRAMMABLE LOGIC CONTROLLERS GRAPHIC OPERATION TERMINAL
A versatile range of graphic terminals that fit to a diverse range of applications, Colorful
Powerful
Simple
realizing affordability with basic functionality!
Introducing the5.7"& 4.7" Versions!
Unveiling the white frame model !
A versatile range of graphic terminals that fit to a diverse range of applications, realizing affordability with basic functionality!
5.7
GT1050 / GT1055 256 Colors or White/Blue 16 scales
A GOT that incorporates GT10 functionality on a GT11 size display Featuring: - Bright STN backlight - 2 model types: 256 color model and 2 color (White & blue) model
Debut! GT1050-QBBD White / Blue 16 scales
Memory board interface
Debut! USB interface
Debut!
Data transfer Memory board GT10-50FMB
Screen Type
5.7’’ 5.7’’
GT1055-QSBD 256 colors
Screen Resolution
Backlight
Touch Switch
320 dots
STN White/Blue 16 scales
16×16 dots Matrix 50 /Screen
STN 256 colors
16×16 dots Matrix 50 /Screen
×
240 dots 320 dots ×
240 dots
User Memory (Project Data)
Timer
Connection Port
Other functions
3 MB
USB
Built-in
RS-422
Transparent mode Multi-unit connection OS preinstalled Versatile Layout
3 MB
Built-in
RS-232 USB RS-422 RS-232
Transparent mode Multi-unit connection OS preinstalled Versatile Layout
GT1040 / GT1045 256 Colors or White/Blue 16 scales
Introducing the new 4.7" (320 x 240 dots) screen size Featuring: - Bright STN backlight - 2 model types: 256 color model and 2 color (White & blue) model
4.7
Debut! GT1040-QBBD White / Blue 16 scales
Memory board interface
Debut! GT1045-QSBD 256 colors USB interface
Debut!
Screen Type
4.7’’ 4.7’’
Screen Resolution
Backlight
Touch Switch
320 dots
STN White/Blue 16 scales
16×16 dots Matrix 50 /Screen
STN 256 colors
16×16 dots Matrix 50 /Screen
×
240 dots 320 dots ×
240 dots
User Memory (Project Data)
Data transfer Memory board GT10-50FMB
Timer
Connection Port
Other functions
3 MB
USB
Built-in
RS-422
Transparent mode Multi-unit connection OS preinstalled Versatile Layout
3 MB
Built-in
RS-232 USB RS-422 RS-232
Transparent mode Multi-unit connection OS preinstalled Versatile Layout
A versatile range of graphic terminals that fit to a diverse range of applications, realizing affordability with basic functionality!
4.5
G T 10 3 0 Green/Orange/Red Version or White/Pink/Red Version
Featuring: - 3-color LED backlight that offers a bright display even under external illumination - High resolution wide screen for intuitive screen designs
Black GT1030-LBD
Green Orange Red
White/Blue
White Orange Pink Red Red Green
256Color White/Blue
Red
256Color
White Pink
Green Orange Red
White/Blue
White Orange Pink Red Red Green
256Color White/Blue
Red
256Color
White Pink
frame
GT1030-LBDW
GT1030-LBD2
GT1030-LBDW2
White frame
Debut!! GT1030-LWD
Green Orange Red
White/Blue
Green Orange Red
White/Blue
White Orange Pink Red Green
256Color White/Blue
White Orange Pink Red Red Green
White/Blue
256Color
White Pink
Red
256Color
Red
256Color
White Pink
GT1030-LWDW GT1030-LWDW2
GT1030-LWD2
GT10-LDR Memory Loader
3-Color Backlight Screen for Vivid Data Visualization
The GT10-LDR
-Offering screen colors that show the
memory loader allows
operating status of the application.
simple transfer of OS
-Enabling specification of color and
and project data.
flashing of the backlight for each screen. -Backlight control via the connected PLC*.
* Color switching and backlight setting to ON, OFF or flashing
Screen Type
4.5’’ Main unit model name
Backlight LED-colors
288 dots
STN 3-colors
STN 3-colors
96 dots
Orange Green Red
Pink White Red
×
GT1030-
LCD L STN Monochrome
Screen Resolution
B W
L
Frame color Black White
B
D
W
Touch Switch
16×16dots Matrix 50/Screen
User Memory (Project Data)
Frame Color
Timer
1.5MB
White Frame Black Frame
Built-in
Connection Port
2
RS-422 RS-422
D
Power supply DC24V
Backlight color - Green / Orange / Red W White / Pink / Red
2
Communication type RS-422 RS-232
RS-232 RS-232
Other functions Transparent mode Multi-unit connection OS preinstalled Versatile Layout
3.7
G T 10 2 0 Green/Orange/Red Version or White/Pink/Red Version
Featuring: - Ultra compact 3.7" Graphic Operator Terminal - Analog touch screen for super flexible screen layout
Black frame
Green Orange Red
White/Blue
White Orange Pink Red Red Green
256Color White/Blue
GT1020-LBD
White Orange Pink Red Red Green
256Color White/Blue
GT1020-LBD2
White Pink
Red
256Color
Green Orange Red
White/Blue
White Orange Pink Red Red Green
256Color White/Blue
White Orange Pink Red Red Green
256Color White/Blue
Red
256Color
White Pink
GT1020-LBDW GT1020-LBDW2
GT1020-LBL
GT1020-LBLW
White frame
Debut!! Green Orange Red
White/Blue
Green Orange Red
White/Blue
White Orange Pink Red Red Green
256Color White/Blue
White Orange Pink Red Red Green
256Color White/Blue
GT1020-LWD
White Orange Pink Red Red Green
256Color White/Blue
White Orange Pink Red Red Green
256Color White/Blue
GT1020-LWD2
White Pink
Red
256Color
Red
256Color
White Pink
GT1020-LWDW GT1020-LWDW2
GT1020-LWL
GT1020-LWLW
GT10-LDR Memory Loader
3-Color Backlight Screen for Vivid Data Visualization
The GT10-LDR
-Offering screen colors that show the
memory loader allows
operating status of the application.
simple transfer of OS
-Enabling specification of color and
and project data.
flashing of the backlight for each screen. -Backlight control via the connected PLC*.
* Color switching and backlight setting to ON, OFF or flashing
Screen Type
Screen Resolution
3.7’’ Main unit model name
160dots
STN 3-colors
STN 3-colors
64 dots
Orange Green Red
Pink White Red
×
GT1020-
LCD L STN Monochrome
Backlight LED-colors
B W
L
Frame color Black White
B
D
W
Touch Switch
2×2dots Analog 50/Screen
User Memory (Project Data)
512KB
Frame Color
White Frame Black Frame
Connection Port
2
RS-422 RS-422
D
Power supply DC24V
Backlight color - Green / Orange / Red W White / Pink / Red
2
Communication type RS-422 RS-232
RS-232 RS-232
Timer
Refer to PLC
Other functions Transparent mode Multi-unit connection OS preinstalled Versatile Layout
Developed for the needs of industry !
A range of sizes,colors and connection methods to suit your needs. Reasons why GT10 series is becoming popular all over the world. Functionality -Multi-action switch replaces the need for overlay switches -Enhanced alarm functions for alarm display,
+
GT10 series
- Combining affordability with
history and scrolling
functionality
-Easy to use device monitor, recipe function and clock function
- Offering a range of screen colors
-Multi-language switching for display
- Pre-installed OS for immediate use
-Multi-unit connection (up to 2 units) -Firmware updates available from the Screen Design software, GT Designer2
3.7
4.5
Super-small display
-inch
-inch
GT1020-LBD
Green Orange Red
White/Blue
GT1020-LBD2
White Pink Red Green Orange Red
White/Blue
Red Red Red Red Red Red
256Color 256Color
NEW GT1020-LWD
Green Orange Red
White/Blue
NEW GT1020-LWD2
White Pink Red Green Orange Red
White/Blue
256Color
GT1020-LBDW
White Green Green White White Green
GT1020-LBDW2
White Pink Red Green Orange Red
256Color
White/Blue
NEW GT1020-LWDW2
White Pink Red Green Orange Red
White/Blue
256Color
White
GT1020-LBLW
White Pink
Red
256Color
NEW GT1020-LWLW
White Pink
Red
256Color
frame
GT1020-LBL
Pink Orange Orange Pink Pink Orange
Wide screen
White/Blue White/Blue
NEW GT1020-LWL
White/Blue
NEW GT1020-LWDW
256Color 256Color
White Green Green White White Green
Pink Orange Orange Pink Pink Orange
Red Red Red Red Red Red
256Color
White/Blue White/Blue
256Color 256Color
White/Blue
Debut!! GT1030-LBD GT1030-LBD2 GT1030-LBDW GT1030-LBDW2
Frame color
Connection method
(DC24V)
RS-232 (DC24V)
RS-422 (DC5V FX Series only)
Pink Orange Orange Pink Pink Orange
White Pink
Red Red Red Red Red Red Red
Green Orange Red
White/Blue
Red
256Color
White frame
Green Orange Red
White/Blue
Red
256Color
White Pink
Green Orange Red
White/Blue
Red
256Color
White Pink
GT1020-LBD
GT1020-LBDW
GT1020-LBD2
GT1020-LBDW2
GT1020-LBL
GT1020-LBLW
White/Blue
256Color
White/Blue White/Blue
256Color 256Color
White/Blue
256Color
4.5-inch
Black frame
White Pink
RS-422
White Green Green White White Green
3.7-inch
Size
Display colors
Green Orange Red
Black frame
Green Orange Red
White/Blue
Red
256Color
White Pink
Green Orange Red
Green Orange Red
White/Blue
Red
256Color
White Pink
GT1020-LWD
GT1020-LWDW
NEW
NEW
GT1020-LWD2
GT1020-LWDW2
NEW
NEW
GT1020-LWL
GT1020-LWLW
NEW
NEW
White Pink
Red
GT1030-LBD
GT1030-LBDW
GT1030-LBD2
GT1030-LBDW2
-
-
White/B
256C
GT11 & GT15 - Taking display solutions to the next level!
GT15 series
A mid-level HMI range that provides an array of easy-to-use functions for stand alone use
A progressive HMI range for a wide range of stand alone and networked applications
5.7
-inch
Flexible and easy to use
5.7-inch
Debut!! Green Orange Red
NEWGT1055-QSBD White Pink Red
Green Orange Red White/Blue 16 scales NEWGT1050-QBBD
Red
White Pink
Red
White Pink
display
White/Blue
256Color
256Color
Green Orange Red
Green Orange Red White/Blue 16 scales NEWGT1040-QBBD
NEWGT1045-QSBD White Pink Red
256Color
White/Blue
4.7-inch
256Color
4.7
Debut!!
-inch
Compact with vivid display
White frame NEW GT1030-LWD
Green Orange Red White Green Green White White Green
NEW GT1030-LWD2 NEW GT1030-LWDW NEW GT1030-LWDW2
Pink Orange Orange Pink Pink Orange
White Pink
Red Red Red Red Red Red Red
Debut!!
White/Blue
256Color
White/Blue White/Blue
256Color 256Color
SIZE
White/Blue
256Color
4.7-inch White frame Green Orange Red
White/Blue
Red
256Color
White Pink
5.7-inch
Black frame
Green Orange Red
/Blue
Color
GT11series
White Pink
Red
GT1030-LWD
GT1030-LWDW
NEW
NEW
GT1030-LWD2
GT1030-LWDW2
NEW
NEW
-
-
White/Blue
Green Orange Red 256Color White Pink Red
White/Blue
16256Color scales
Black frame
Green Orange Red
White/Blue
Red
256Color
White Pink
GT1040-QBBD
GT1045-QSBD
NEW
NEW
-
Green Orange Red White Pink
White/Blue
scales 256Color Red 16
Green Orange Red
White/Blue
Red
256Color
White Pink
GT1050-QBBD
GT1055-QSBD
NEW
NEW
-
GT10 MODEL
Common Hardware Functionality
GT10 MODEL
Common Software Functionality
WHY GT10?
1 GT10 MODEL
Enhanced screen size lineup, ranging from small to medium
From simple data transfer to screen design software
The GT10 Series now incorporates a new model featuring a larger 5.7" screen that enables improved screen design flexibility.
GT10 MODEL
Version upgrade
GT10 MODEL
Performance Specifications
5.7 4.7 4.5 3.7
inch QVGA 320×240dots Matrix touch panel Minimum unit of touch key size:16x16dots Maximum number of touch keys: 50/Screen
inch
inch
inch
5.7 4.7 4.5 3.7
inch inch QVGA 320×240dots Matrix touch panel Minimum unit of touch key size:16x16dots Maximum number of touch keys: 50/Screen
Black Frame
White frame
inch
WHY GT10?
inch
Black Frame
288×96 dots Matrix touch panel inch Minimum inch touch screen size: 16x16 dots inch Maximum number of touch keys: 50/Screen
5.7 4.7 4.5 3.7 inch
inch
White frame
160×64 dots Analog touch panel inch Minimum touch screen size: 2x2 dots Maximum number of touch keys: 50/Screen
5.7 4.7 4.5 3.7 inch
inch
Similar dimensions to F900 Series allows simple replacement without panel design changes *1
2
The GT1050/GT1055 has the same panel mounting dimensions as the
The GT1030 has the same panel mounting dimensions as the F930GOT yet
F940GOT.
with improved resolution*2 .
320 dots
240 dots
320 dots
F930GOT
GT1050/GT1055
240 dots
F940GOT
GT1030
240 x 80 dots resolution
288 x 96 dots resolution 288 dots 240 dots
QVGA 320 x 240 dots in each model 80 dots
F940GOT
GT1050/GT1055
96 dots
GT1030
+1 -0
Same panel cutting dimensions
66
121 +1 -0
F930GOT
57
56
49
153 +1 -0
Same connection direction for the communication connector
Unit : mm
29.5
Slim design
*1: When the F940GOT is replaced with the GT1050/GT1055 or when the F930GOT is replaced with the GT1030
Same panel cutting dimensions 137 +1 -0
Unit : mm *2: 1.44 times compared with the F930GOT
WHY GT10?
3
Transparent function connecting the PLC via the GOT
Through the personal computer communication connector at the rear of the GOT, users can debug, start and adjust sequence programs. Communication port: 3 channels
Connection cable RS-232 (PLC or PC connection)
GT01-C30R2-9S
RS-422 Memory board interface
Battery board iterface
FX/Q/QnACPU Connecting directly Q/QnACPU Serial communication unit connection Connection cable GT09-C30USB-5P (3m)
Transparent Function
GX Developer
Connected to the PLC via the GOT (USB or RS-232)
Communication port: 2 channels
Connection cable RS-232:GT01-C30R2-6P(3m)
RS-422(Removable type) or RS-232(Removable type)
or USB:GT10-RS2TUSB-5S +GT09-C30USB-5P(3m)
FX/Q/QnACPU Connecting directly Q/QnACPU Serial communication unit connection
Transparent Function
GX Developer
Connected to the PLC via the GOT (RS-232)
WHY GT10?
4
WHY GT10?
Multi-terminal connection*3
5
Versatile mounting
Up to two GT10 units can be connected to one PLC unit even if the screen
Both hor izont al and ver tic al
sizes differ. Thus enabling greater flexibility with terminal positioning.
mounting is available to the GT10 Series causing minimum impact to the application design.
When RS-422 is used to connect the 1st unit*4
FX,A,QnA FX,A,QnA
RS-422 RS-422 Maximum30m Maximum30m
RS-232 RS-232 Maximum15m Maximum15m
When RS-232 is used to connect the 1st unit*4
FX,Q FX,Q
RS-232 RS-232 Maximum15m Maximum15m
Cable Cable GT01-C30R2-9S GT01-C30R2-9S WHY GT10?
6
Power Supply & Communication
Applicable models Cable Cable Made Madeby bycustomer customer RS-422 RS-422 Maximum30m Maximum30m
The 5V DC type GOT draws power through the FX programming port communication cable. Additional power supply not required.
Power Supply and Communication
FX/Q/QnA/ACPU Connecting directly
RS-422 or RS-232 Connection type
RS-232 Connection type
GT1020-LBL GT1020-LBLW GT1020-LWL GT1020-LWLW
NEW NEW FX Series PLC
RS-422 Maximum30m
or
RS-232 Maximum15m
GT10-C30R2-6P
Maximum 3m
*3: The transparent function is not available when multiple units are connected. The USB interface is not available for connection of two units. *4: Refer to the connection manual for applicable models, required interface and compatibility with serial communication units (computer link units). The maximum length varies depending on the connected equipment. Refer to the connection manual for details.
GT10 MODEL
Common Hardware Functionality
GT10 MODEL
Common Software Functionality
GT10 MODEL
From simple data transfer to screen design software
WHY GT10?
8 GT10 MODEL
Alternative start-up screen
Version upgrade
WHY GT10?
Multi Action Switch
11
Alternative bitmap images can be displayed when the GOT starts. Images
Because one switch can determine multiple functions, it is not necessary to
may include photos, company logos etc.
overlay different switches types for each function.
GT10 MODEL
You can reduce loads on sequence programs by combining the settings of delay, Performance Specifications
(The logo label “GOT1000” can also be removed.)
repetition, interlock, etc. according to the operations within the PLC.
Screen switching Switch ON/OFF Data setting Interlock One-touch
WHY GT10?
9
WHY GT10?
Choose your font!
12
Security
Format String function
A variety of fonts are available including the standard type set and the
The GT10 c an display charac ter s (alphabets, number s, kanji and
windows type set. When windows fonts are selected, italic, underlined and
symbols) in the device value display
underlined italic are also available.
When the formatted character string in the basic settings is set as follows ##m ##cm When the device value is “1234” 12m 34cm
WHY GT10?
13
Simple set-up of language switching windows
Language switching windows can be easily created allowing one language to be switched to another, for example English to Japanese. Up to 10 languages can be switched per comment group. Window switching can take place not only for languages but also for different applications. WHY GT10?
10
Design unification using the parts library English
Japanese
Lamps and switches can be selected from the Screen Design Software's built in library. Alternatively new parts can be downloaded from the web. Library images can be displayed in all colors.
WHY GT10?
14
Characters from all over the world for people all over the world
The GOT1000 series can display a number of languages for a variety of countries and areas. Monochrome Soft AV Crystal Real
10
WHY GT10?
15
WHY GT10?
Device monitor function
18
Simple data setting using the recipe function
You can monitor the ON/OFF status of bit devices and values of word
The GOT has a built-in memory for up to 4,000 points (corresponding to
devices in FX/Q/QnA/A Series PLCs, as well as change the timer and
16-bit word devices). Using this memory the GOT can transfer a range of
counter values.
values to and from the PLC.
Recipe function Read Write
Recipe 1
Recipe 2
Cut size : large
Cut size : small
D0
2000
D0
1000
D1
5000
D1
2500
D2
6000
D2
3000
GT1055 WHY GT10?
16
Preinstalled OS to enable immediate use
WHY GT10?
19
Alarm function
Pre-installed OS
The GOT offers alarm display, alarm history and alarm scroll functions to
The OS of the GOT is installed before shipment from the factory.
enable display setting for each window. Language switching for alarms is also available.
You can set alarm scroll, color and display position.
Communication driver The communication driver mounted before shipment is provided for an FX Series PLC. To connect a Q/QnA/A Series PLC, microcomputer board or other supported PLC device you have to install the required communication driver available from GT Designer2.
When using a GOT together with a FX PLC, all that
PLC
is required is to download the project data.
WHY GT10?
17
GT1055 WHY GT10?
Sequence program edition
20
Screen save function
The backlight ON/OFF setting achieves energy-saving whilst enabling the GOT
Applicable models :
to function. The GOT screen can be controlled from the PLC, allowing backlight and alarm windows to be controlled in the event of an error. You can edit sequence programs in the list format of the FX PLC in the GOT. This function is convenient for simple program changes in the local site. WHY GT10?
21
Functionality • Screen : 1,024 base screens max + 512 windows max
Features • Screen switching function, screen call, language switching function, password protection, system information, connected equipment setting and startup logo
Figure drawing
Straight line, continuous straight line, rectangle, polygon, chamfered rectangle, circle, ellipse, circular arc, elliptical arc, circular sector, elliptical sector, scale display, painting and image type (BMP/DXF) Comment registration (basic comment and comment group), object registration, data calculation function, offset function, security function, lamp display, touch key, numerical display and input,
Object
ASCII display, clock display (linked to PLC clock), comment display, alarm list, alarm history, alarm scroll, object display, panel meter, trend graph, line graph, bar graph, state monitoring function, recipe function (4,000 points) and time action function, Device monitor function
GT1055
11
GT10 MODEL
Common Software Functionality
GT10 MODEL
From simple data transfer to screen design software
GT10 MODEL
Version upgrade
WHY GT10?
Data transfer for improved user-friendliness and flexibility
GT10 MODEL
22
Performance Specifications
Optional memory board and memory loader provide a convenient way to download project data and operating system to terminals without a PC. Furthermore when downloading to multiple units speed and efficiency is increased.
34.8
Data transfer memory board GT10-50FMB
Basic OS, communication driver
Debut!
and project data
Read/Write
36 Unit : mm
Illustration showing how the memory board is attached to the terminal
Data can be read or written as shown in the utility window above. Data is written at startup when two points are pressed on the screen.
Memory loader GT10-LDR -Has a compact design (70 Ă— 110 mm), where the GOT transfer cable can be accommodated inside the body. -Can write the basic OS, communication driver and project data. -Can read the project data and resource data. -Offers simple switch type operation, where the write-protect switch prevents erroneous reading. - Does not require power supply as power is supplied from the GOT or personal computer.
110
At the desk...
Standard monitor OS, communication driver project data, resource data*1 Read/Write 70
Unit : mm
USB cable (1 m) packed together PC (GT Designer2)
GT10-LDR
...on location
Standard monitor OS, communication driver project data, resource data*2 Read/Write RS-232 transfer cable (0.2 m) incorporated
GT1020/GT1030
*1: The basic OS and communication driver can be written only, and resource data can be only read. *2: Resource data can be only read. WHY GT10?
23
Intuitive screen design software
GT Designer2 is an intuitive screen design software that interfaces with the entire GOT1000 Series. The latest version of the software is more user friendly and features the latest functions.
Transfer
Version2 - Offers useful functions - Supports creative screen designs.
Work space A simple tree display that makes copying, deleting and registering of screens easy.
Property sheet Details screen object 's proper ties for quick parameter changes.
12
Screen creation
GOT
Parts library Image display of registered components that makes selecting components easy, and thus improves the efficiency in which screens are created.
Dialog box Object and figure setting screen that can be accessed by a simple double click of the screen objects.
GT10 MODEL
From simple data transfer to screen design software
GT10 MODEL
Version upgrade
By using the latest version screen design software, the GOT firmware can also be upgraded to the latest version.
GT10 MODEL
WHY GT10?
24
Performance Specifications
Device monitor function
WHY GT10?
Ver. 2.82L or later
Enhanced alarm functions
25
By specifying a device in the connected PLC, you can monitor and change it.
Ver. 2.73B or later
Comment groups are available in the alarm history function. Comments can be scrolled on an arbitrary window while the alarm history is displayed
GT1020 screen GT1030 screen
<Key functions> Bit device: Monitoring status and forcing bits ON/OFF Word device: Monitoring of the set value and current value, and setting new values. WHY GT10?
26
Enhanced window functions
WHY GT10?
Ver. 2.73B or later
WHY GT10?
28
Ver. 2.77F or later
Improved connectability
27
- 512 windows are available. - The window overlay function is available - The window superimpose function is provided
This window pops up on the base window.
GT1020 screen GT1030 screen
<Available connections> -The MELSEC QnU Series is connectable. -The transparent function is available for the serial communication unit QJ71C24N. -The CC-Link connection (via the G4) is supported.
This window is composed on the base window.
Ver. 2.73B or later
Connection to the Mitsubishi inverter series
Direct connection to the inverter facilitates direct control.
GT10 Series allows direct connection of inverters allowing enhanced control.
Operation command
Applicable models S500 A700 A500 F700 F500 E700 V500
Monitoring
Monitoring and changing of inverter parameters from the GOT improves operability and reduces setup time.
WHY GT10?
29
Connection to the bar code reader
Ver. 2.77F or later
The RS-232 connection port for personal computer can be connected to a bar code reader.
1234 Bar code reader
DataRegister D1000
RS-232
GT1020 or GT1030 image
1234
PLC
GT10-C02H-6PT9P
13
GT10 MODEL
Version upgrade
GT10 MODEL
Performance Specifications
GT10 common specifications General Specifications Specification
Item Ambient operating temperature
Excluding display area: 0 to +55ºC (horizontal layout) or 0 to +50ºC (vertical layout)
Intermittent vibration Continuous vibration
Vibration resistance
500 VAC, 1 min (between all power terminals and ground) 10 MΩ or more by 500 VDC insulation resistance tester (between all power terminals and ground)
Insulation resistance*5
-20 to +60ºC (Ambient operating/storage humidity*1 : 10 to 90% RH, no dew condensation)
Ambient storage temperature
Specification
Item Maximum voltage*5
Display area: 0 to +50ºC
Frequency Acceleration Amplitude Vibration testing 5 to 9 Hz 3.5mm repeated 10-times 9 to 150Hz 9.8m/s2 in the X, Y and Z 5 to 9Hz 1.75mm planes. 9 to 150Hz 4.9m/s2
Ambient atmosphere
Free from soot, corrosive gas, flammable gas, and high levels of conductive dusts
Protective structure against environment
Equivalent to IP67f (JEM 1030) (front face) (This structure does not provide protection against all environmental conditions in your site.) Class D grounding (insulation resistance: 100Ω or less When grounding is disabled, perform grounding to the panel.)
Grounding*5
Operating height above sea level*2 : 2,000 m or less, Installation location: Inside control panel, Over-voltage category*3 : II or lower, Pollution level*4 : II or lower, Cooling Method: Self-cooling
Others
In conformance to IEC 61131-2 Impact resistance
In conformance to IEC 61131-2 (147 m/s , application period: 11ms, sine half-wave pulse, 3 times in each of X, Y and Z directions)
Noise resistance
Noise voltage: 1,000 Vp-p, noise width: 1μs (Testing via a noise simulator whose noise frequency (range 30 to 100 Hz)
2
*1 Wet bulb temperature: 39ºC or less *2 Never use the GOT in an environment that is pressurized to an atmospheric pressure above the height of sea level as the GOT may mulfunction. *3 The over-voltage category indicates the equipment is connected to a power distribution area between the public power distribution network and the machine site. Category II is applied to equipment supplied by a fixed power source where the resistance voltage is 2,500 V in equipment whose rating is 300V or less. *4 This index indicates the level of conductive substances in the environment where the equipment is used. Level 2 is applied to environments where only non-conductive pollution is generated but temporary conductive states can occur through condensation of the environment. *5 This cable cannot be used for GT1020-LBL(W).
GT1050/GT1055,GT1040/GT1045 specifications Performance specification Item
GT1050-QBBD STN monochrome (white and blue) liquid crystal
Type Screen size/resolution Display size (mm)
Display area
Number of displayed characters
For 16-dot font For 12-dot font
View angle(in horizontal display mode)
GT1055-QSBD
GT1040-QBBD
GT1045-QSBD
STN color liquid crystal
STN monochrome (white and blue) liquid crystal
STN color liquid crystal
5.7-inch/QVGA:320W×240H dots
4.7-inch/QVGA:320W×240H dots
115(W)×86(H) (5.7-inch) horizontal display mode
96(W)×72(H) (4.7-inch) horizontal display mode
40 half-width characters x 15 lines or 20 full-width characters x 15 lines when horizontal mounting 53 half-width characters x 20 lines or 26 full-width characters x 20 lines when horizontal mounting Right/Left:45°
Right/Left:55°
Right/Left:45°
Right/Left:50°
UP:20°,Down:40°
UP:65°,Down:70°
UP:20°,Down:40°
UP:40°,Down:70°
monochrome 16 scales
256 colors
monochrome 16 scales
256 colors
260[cd/m2]
380[cd/m2]
300[cd/m2]
150[cd/m2]
Contrast adjustment Display colors Intensity
16 step adjustment
Life
Approx.50,000hours (operating ambient temperature 25°C) Cold-cathode fluorescent tube (not replaceable)
Type Backlight (no replacement required)
Backlight off time and screen save time can be set. Approx.75,000 hours (Time for display intensity reaches 50% at
Life
Touch panel
Backlight off time and screen save time can be set. —
operating ambient temperature of 25°C)
Maximum number of touch keys
50 keys/screen (matrix consisting of 15 lines × 20 columns)
Minimum unit of touch key size
Min. 16 × 16 [dots] (per key)
No. of simultaneous touch points
Max. 2 points
Life
1,000,000 times or more Single tone (Long sound, short sound or no sound can be selected.)
Buzzer output (buzzer sound issued when a touch key is pressed) Memory
White LED (not needed)
With backlight OFF detection function.
Function
Built-in flash ROM [To store project data (3 MB or less), OS, alarm history and recipe data]
User memory Life (number of times of writing)
100,000 times GT11-50BAT lithium type battery
Battery
Backed up data Life Type RS-422
Clock data, alarm history and recipe data Replacement cycle: 5 years (at ambient operating temperature of 25ºC) RS-422, 1ch, Transmission speed: 115200/57600/38400/19200/9600/4800 bps
Connector shape
ReceptacleD-sub 9-pin (female)
Application Type Built-in interface
RS-232
Communication with connected devices RS-232, 1ch, Transmission speed: 115200/57600/38400/19200/9600/4800 bps
Connector shape Application
D-sub 9-pin (male) Communication with connected devices,connection to personal computer (project data upload/download, OS installation, transparent function)
Type USB
USB (full speed: 12 Mbps), device 1ch
Connector shape Application
Mini-B(receptacle) Connection to personal computer (project data upload/download, OS installation, transparent function)
Memory board interface Weight
GT10-50FMB (option)slot, Application:Data transfer 0.7 [kg] (excl. fittings)
Applicable software package Supply voltage
DC24V(+10% to -15%),ripple voltage of 200mV or less
Fuze (not replaceable) Power consumption [ ]:with backlight off
1.0A 9.36W or less (390mA/DC24V)
9.84W or less (410mA/DC24V)
3.6W or less (150mA/DC24V)
[4.32W or less (180mA/DC24V)]
[4.32W or less (180mA/DC24V)]
[2.9W or less (120mA/DC24V)]
Inrush current Permissible instantaneous failure time About the accessible machinery (sequencer, a bar-code reader), please refer to a GOT1000 series connection manual.
14
0.45 [kg] (excl. fittings) GT Designer 2 Version 2.90U or later
15A or less (2ms, at max. load) Up to 5ms
GT1030/GT1020 specifications Performance specification Item Type Screen size/Resolution Display size (mm) For 16-dot Number of font displayed Display area For 12-dot haracters font
GT1020- ®®®®® LBDW2 LBD LBD2 LBL LBDW LBDW2 LWDW2 LWD LWD2 LWL LWDW LWDW2 STN monochrome (black and white) liquid crystal 4.5-inch/288 (W) x 96 (H) dots 3.7-inch/160 (W) x 64 (H) dots 109.42 (W) x 35.98 (H) (4.5-inch) in horizontal mounting 86.4 (W) x 34.5 (H) (3.7-inch) in horizontal mounting LBD LWD
GT1030- ®®®®® LBD2 LBDW LWD2 LWDW
LBLW LWLW
36 half-width characters x 6 lines or 18 full-width characters x 6 lines when horizontal mounting
20 half-width characters x 4 lines or 10 full-width characters x 4 lines when horizontal mounting
48 half-width characters x 8 lines or 24 full-width characters x 8 lines when horizontal mounting
—
View angle 30 degrees leftward, 30 degrees rightward, 20 degrees upward and 30 degrees downward when horizontal mounting Contrast adjustment 16 steps 2 300[cd/m2] 200[cd/m2] 300[cd/m2] Intensity 200[cd/m ] Life Approx. 50,000 hours (Ambient operating temperature: 25ºC), Guarantee: 1 year (time when contrast becomes 1/5 at ambient operating temperature of 25ºC) Color 3-color LED (green, orange and red) 3-color LED (white, pink and red) 3-color LED (green, orange and red) 3-color LED (white, pink and red) Backlight (not requiring Brightness adjustment 8 steps — replacement) Function Status (color and ON/flickering/OFF) can be controlled, and screen saving time can be set. Color and status of backlight can be controlled from PLC. Maximum number of 50/screen (matrix resistive film type, 18 x 6) 50/screen (analog resistive film type) touch keys Minimum unit of touch 16 x 16 dots (per key) 2 x 2 dots (per key) Touch panel key size Simultaneous pressing Permitted Not permitted*1 (2 touch keys) Life 1,000,000 times or more (pressing force: 0.98 N or less) Buzzer output (buzzer sound issued Single tone (Long sound, short sound or no sound.) when a touch key is pressed) Built-in flash ROM Built-in flash ROM User memory [To store project data (1.5 MB or less) and OS] [To store project data (512 kB or less), OS, alarm history and recipe data] Memory Life (number of times of 100,000 times writing) Built-in lithium battery GT11-50BAT to store clock data, Battery alarm history and recipe data, replacement cycle: 5 years — (at ambient operating temperature of 25ºC) Serial Serial Serial Serial Serial Serial Serial Serial Serial Serial RS-422 RS-232 RS-422 RS-232 RS-422 RS-232 RS-422 RS-422 RS-232 RS-422 For communication with PLC In conformance to standard (insulation type), 1 channel, transmission speed: 115,200/57,600/38,400/19,200/9,600/4,800 bps, Built-in interface connector shape: 9-pin type connector terminal board In conformance to serial RS-232 standard (insulation type), 1 channel, transmission speed: For communication with personal computer 115,200/57,600/38,400/19,200/9,600/4,800 bps, connector shape: 6-pin type mini DIN (female) Applicable software package GT Designer2 Version 2.90U or later 5 VDC (±5%) 5 VDC (±5%) 24 VDC (+10%, -15%) 24 VDC (+10%, -15%) 24 VDC (+10%, -15%) Supply voltage (24 V type has built-in Supplied from Supplied from fuse, and cannot be replaced.) [Ripple voltage: 200 mV or less] [Ripple voltage: 200 mV or less] [Ripple voltage: 200 mV or less] PLC PLC 1.1W or less 1.1W or less Power consumption [ ]:With backlight off
2.2W or less (90mA/DC24V),
1.9W or less (80mA/DC24V),
(220mA/DC5V),
1.9W or less (80mA/DC24V),
[1.7W or less (70mA/DC24V)]
[1.2W or less (50mA/DC24V)]
[0.6W or less
[1.2W or less (50mA/DC24V)]
(120mA/DC5V)] Inrush current Permissible instantaneous failure time
(220mA/DC5V), [0.6W or less (120mA/DC5V)]
18A or less (DC26.4V) 1ms
13A or less (DC26.4V) 1ms
—
13A or less (DC26.4V) 1ms
—
Up to 5ms
Up to 5ms
—
Up to 5ms
—
*1 If there is a key around the center of the pressed area when two or more keys are pressed, the key in the center may be activated.
15
Function list Functions
GT10
GT11
GT15
OS Pre-install
Boot OS installation
l
—
—
OS installation
l
—
—
Communication driver
l
—
functions Object setting
Main unit functions
—
(onlyFX)*1
Japanese Font Pre-install
Chinese (Simplified)
l —
GT11
GT15
—
—
Alarm list display
l
l
l*2 l
Alarm history display
l l
l*2 l
l*2
Floating alarm display Parts display
l
l
l*2
—
—
—
Parts movement
—
l
—
—
Panel meter display
l
l
l*2 l
Level display
—
l
l
l
l
l
—
—
l l
English
l
—
—
Korean
—
—
—
Trend graph
—
l
l
Historical trend graph*
Boot OS installation
5
OS installation
l
l
l
Line graph,Bar graph
l
l
Start from CF card
—
—
l
Statistical graph
l
l
l
Scatter graph
—
l
l
Graph
Project data download/upload
Usable also on memory board
l
—
—
Usable also on CF card
—
l
l
Status observation function
l
l
l
Resource data upload
Usable also on CF card
—
l
l
Extended recipe function
—
—
l*2
Transparent function
l
l
l
Recipe function
l
Multi-channel function(Max 4ch)
—
—
l
Time action function
l
l*2 l
l*2 l
Gateway function
—
—
l*2
Report function
File saving in CF card
—
—
l
MES interface function(Option function board is required)
—
—
l*2
File saving in CF card
—
—
l
l
l
Print out
—
—
l*6 l
Multi-unit connection
Hardcopy function
—
MAX 2 unit MAX 2 unit
Other
Screen design Specifications
Barcode function
l
l
RFID function
—
l
l
Vertical display
l
l
—
—
—
l
—
—
l
—
—
l
Sound output function*
7
Base screen
l
l
l
External input/output function*
Superimposed window display
l
l
l
Operation panel function*
Overlap window display
l
l
l
Screen call function
l
l
l
Dialog window display
—
l
l
Operation log function File saving in CF card
—
—
l
Supported image data format
Fonts
8
8
BMP image display
l
l
l
JPEG image display
—
—
l
Document display function (Option function board and CF card required)
—
—
l
Logging function
DXF data
l
l
l
IGES data
—
l
l
Standard fonts(basic)*3
l
l
l
Standard fonts(optional)*4
—
—
l
High-quality font
l
l
l
True Type font
l
l
l
Script function
—
—
l
Project script
—
l
l
Screen script
—
l
l
Object script
—
—
l
—
—
l
Device data transfer function
Windows® font
l
l
l
Maintenance functions
Stroke basic font (extended)
—
—
l
Device monitor function
l
l
l
Stroke font (optional)
—
—
l
System monitor function
—
l
l
Common settings
Japanese
l
l
l
List editor for A
Chinese (Simplified)
—
l
l
List editor for FX
German
—
l
l
English
l
l
Korean
—
Chinese (Traditional)
—
Parts (object + figure) layer function
—
Screen switching
Object setting
—
l*9
l
l*10
l*11
l
Ladder monitor function
—
—
l
l
Intelligent unit monitor function
—
—
l
l
Q motion monitor function
—
—
l*12 l
—
—
Servo amplifier monitor function
—
—
l
l
l
Network monitor function
—
—
l
l
l
l
Backup/restoration function
—
—
l
Station No. switching
—
—
l
Maintenance time notification function*
—
—
l
Multilingual support function
l
l
l
Password
l
l
l
System information
l
l
l
Connected device setting
l
l
l
Boot logo
l
l
l
Comment registration
l
l
l
Parts registration
l
l
l
Data operation function
l
l
l
Offset function
l
l
l
*9:The GT115o-QoBDQis not applicable
Security level authentication
l
l
l
Operator authentication
—
—
l
Lamp display
l
l
l
*10:Supported only by GT105o *11:Only serial communication type *12:Supported only by GT1555-VTBD *13:Battery is required
Touch switch
l
l
l
Numeric display/input
l
l
l
Data list display
—
l
l
System language switcing
Security function
16
GT10
Extended alarm monitoring/display
ASCII display/input
l
l
l
Kana-Kanji conversion function
—
—
l
Clock display
l
l
l
Comment display
l
l
l
13
*1:You have to install the required communication driver available from GTD2 *2:CF cards are necessary conditions maybe *3:Suported GT10:European(Japanese),GT11,GT15:European(Japanese,Chinese) *4:Chinese (Simplified),Chinese (Traditional),Japanese *5:Combination of logging function *6:Printer unit is required *7:Sound output unit is required *8:External I/O unit is required
For further details on using these features please refer to the manual.
Dimensions 6
120
121
GT1050/GT1055 panelcut outsize same as F940 GOT
USB
135
RS-422
+2 -0
RS-232
Panelcut
164
153 +2 -0
56 Unit: mm Outer color: Black
Weight: 0.7kg(excluding metal fixtures) Accessories: Metal fixtures for mounting to panel packing
5
+1
103 -0
102
USB
RS-422
112
RS-232
Panelcut
139
130 +1 -0
41 Unit: mm Outer color: Black
(RS-422) (RS-232)
145
Panelcut
(common)
SD RD ER DR SG RS CS NC NC
+ INPUT
+1
- 24VDC (FG)
66 -0
76
65
SDA SDB RDA RDB SG RSA RSB CSA CSB
Weight: 0.45kg(excluding metal fixtures) Accessories: Metal fixtures for mounting to panel,packing
GT1030 panelcut outsize same as F930 GOT 137
29.5
+1 -0
Unit: mm Weight: 0.3kg(excluding metal fixtures) Outer color: Black Frame or White Frame Accessories: Connector for communication with PLC Metal fixtures for mounting to panel
DC5V
27
SD RD ER DR SG RS CS NC NC
+ INPUT - 24VDC (FG)
SDA SDB RDA RDB SG RSA RSB
Panelcut
+1 -0
65
74 113
SDA SDB RDA RDB SG RSA RSB CSA CSB
RS-422
( RS-422)
(RS-422) ( RS-232) (common)
66
DC24V
-- INPUT + 5VDC
5 VDC is supplied from PLC by way of dedicated cable.
+1
105 -0
Unit: mm Weight: 0.2kg(excluding metal fixtures) Outer color: Black Frame or White Frame Accessories: Connector for communication with PLC Metal fixtures for mounting to panel
17
System Configuration
RS-422 (24 V DC Power supply)
RS-422 (24 V DC Power supply) GT1050-QBBD GT1055-QSBD
RS-232
NEW NEW
24 VDC Power supply
RS-422
RS-422 24 VDC Power supply
Connection Cables GT01-C10R4-8P GT01-C30R4-8P GT01-C100R4-8P GT01-C200R4-8P GT01-C300R4-8P
Connectable PLCs
(1m) (3m) (10m) (20m) (30m)
•Built-in port in FX1S, FX1N, FX 2N, FX 2NC or FX3U Series PLC or RS-422 type function extension board
Prepared by customer *1 GT01-C30R4-25P GT01-C100R4-25P GT01-C200R4-25P GT01-C300R4-25P
•Q (Q mode)/QnA CPU serial communication unit 1,200 m maximum
•Built-in port in QnA/A Series PLC
(3m) (10m) (20m) (30m)
•Built-in port in Q CPU Conversion cables (recommended products manufactured by Mitsubishi Electric Engineering Company Limited) : FA-CNV2402CBL(0.2m)/ FA-NV2405CBL(0.5m)
Prepared by customer *1
RS-422
Prepared by customer *1
Prepared by customer *1 GT10-C30R4-25P GT10-C100R4-25P GT10-C200R4-25P GT10-C300R4-25P
•Inverter *1 S500,A500,F500, V500,A700,F700,E700
•Microcomputer*1 • OMRON*1
CQM1H,CJ1,CP1,C200HS,C200H,C200H α,CS1, C1000H,C2000H,CV500,CV1000,CV2000,CVM1
RS-232 (24 V DC Power supply)
GT1050-QBBD GT1055-QSBD
NEW NEW
24 VDC Power supply
Connection Cables
Connectable PLCs •Built-in port in Q CPU •RS-232 type function extension board or special adapter for communication connected to FX1S, FX1N, FX 2N, FX 2NC or FX3U Series PLC
24 VDC Power supply
GT1030-LBD2 GT1030-LWD2 GT1030-LBDW2 GT1030-LWDW2 GT1020-LWD2 GT1020-LBD2 GT1020-LBDW2 GT1020-LWDW2
RS-232 Connection Cables GT10-C30R2-6P(3m)
Prepared by customer
•Q (Q mode)/QnA (S) CPU serial communication unit
•RS-232 type function extension board or special adapter for communication connected to FX1S, FX1N, FX 2N, FX 2NC or FX3U Series PLC 15 m maximum
Prepared by customer *1
•Q (Q mode)/QnA (S) CPU serial communication unit 15 m maximum
Prepared by customer
*1
• Barcode reader*1 • OMRON*1 • Matsushita Electric *1 • TOSHIBA MACHINE*1 • Yasukawa Electric*1 • KEYENCE*1 • Allen-Bradley*1 • SIEMENS*1
NEW NEW
•Built-in port in Q CPU *1
15 m maximum
•Microcomputer*1
NEW NEW
Connectable PLCs
15 m maximum
Prepared by customer *1
1,200 m maximum
Prepared by customer *1
• OMRON*1
RS-232
Prepared by customer
•Q (Q mode)/QnA CPU serial communication unit
•Built-in port in Q CPU Conversion cables (recommended products manufactured by Mitsubishi Electric Engineering Company Limited) : FA-CNV2402CBL(0.2m)/ FA-NV2405CBL(0.5m)
•Microcomputer*1
RS-232
*1
NEW NEW
•Built-in port in QnA/A Series PLC
(3m) (10m) (20m) (30m)
RS-422
GT09-C30R2-9P(3m)
GT1020-LWD GT1020-LWDW
Prepared by customer *1
RS-232 (24 V DC Power supply)
GT01-C30R2-9S(3m)
GT1020-LBD GT1020-LBDW
•Built-in port in FX1S, FX1N, FX 2N, FX 2NC or FX3U Series PLC or RS-422 type function extension board
CQM1H,CJ1,CP1,C200HS,C200H,C200H α,CS1, C1000H,C2000H,CV500,CV1000,CV2000,CVM1
GT01-C30R2-6P(3m)
NEW NEW
Connectable PLCs
(1m) (3m) (10m) (20m) (30m)
S500,A500,F500, V500,A700,F700,E700
Prepared by customer *1
GT1030-LWD GT1030-LWDW
Connection Cables GT10-C10R4-8P GT10-C30R4-8P GT10-C100R4-8P GT10-C200R4-8P GT10-C300R4-8P
Prepared by customer *1
•Inverter *1
GT1030-LBD GT1030-LBDW
•Microcomputer*1 • Barcode reader*1
Prepared by customer *1
• OMRON*1 • Matsushita Electric*1 • TOSHIBA MACHINE*1 • Yasukawa Electric*1 • KEYENCE*1 • Allen-Bradley*1 • SIEMENS*1
GT1020-LBL, GT1020-LBLW, GT1020-LWL, GT1020-LWLW (5V DC Power supply by PLC) RS-422 5 V DC Power supply by PLC RS-422
Connection Cables GT10-C10R4-8P(1m) GT10-C30R4-8P(3m) *1: Please refer to the connection manual for details.
18
GT1020-LBL GT1020-LBLW GT1020-LWL GT1020-LWLW
NEW NEW
Connectable PLCs •Built-in port in FX1S, FX1N, FX 2N, FX 2NC or FX3U Series PLC or RS-422 type function extension board
Main unit & Option parts Division
Specifications
Model name Type
Frame color
GT1050/GT1055
GT1055-QSBD
NEW
main unit
GT1050-QBBD
NEW
GT1040/GT1045
GT1045-QSBD
NEW
main unit
GT1040-QBBD
NEW
Memory board
GT10-50FMB
NEW
Display
CE Power supply
PLC connection/PC
EMC
LVD
UL/cUL
RS-422/RS-232/USB
°
—
—
RS-422/RS-232/USB
°
—
—
RS-422/RS-232/USB
°
—
—
RS-422/RS-232/USB
°
—
—
For GT1050/GT1055,GT1040/GT1045
°
—
—
GT01-C10R4-8P
FXCPU (MINI-DIN 8 pin) direct connection RS-422 cable [1m]
—
—
—
GT01-C30R4-8P
FXCPU (MINI-DIN 8 pin) direct connection RS-422 cable [3m]
—
—
—
GT01-C100R4-8P
FXCPU (MINI-DIN 8 pin) direct connection RS-422 cable [10m]
—
—
—
GT01-C200R4-8P
FXCPU (MINI-DIN 8 pin) direct connection RS-422 cable [20m]
—
—
—
GT01-C300R4-8P
FXCPU (MINI-DIN 8 pin) direct connection RS-422 cable [30m]
—
—
—
GT01-C30R4-25P
QnA/ACPU (D-SUB25 pin) direct connection RS-422 cable [3m]
—
—
—
GT01-C100R4-25P
QnA/ACPU (D-SUB25 pin) direct connection RS-422 cable [10m]
—
—
—
GT01-C200R4-25P
QnA/ACPU (D-SUB25 pin) direct connection RS-422 cable [20m]
—
—
—
GT01-C300R4-25P
QnA/ACPU (D-SUB25 pin) direct connection RS-422 cable [30m]
—
—
—
GT01-C30R2-6P
QCPU (MINI-DIN 6 pin) direct connection RS-232 cable [3m]
—
—
—
GT01-C30R2-9S
FXCPUcommunication boards(D-SUB 9 pin) connection RS-232 cable [3m]
—
—
—
GT01-C30R2-9S
PC (D-SUB 9 pin: female)<=>GOT (D-SUB 9 pin: female) connection RS-232 cable [3m]
—
—
—
PC (USB-Atype)<=>GOT (USB-MINI-Btype) connection USB cable [3m]
—
—
—
5.7-inch (256 color) 5.7-inch (16 scales)
Black
DC24V
4.7-inch (256 color) 4.7-inch (16 scales)
-RS-422 for PLC connection (Common with GT11)
Connection cable
-RS-232 for PLC connection (Common with GT11)
Data Transfer cable
Division
GT09-C30USB-5P
Specifications
Model name Type
Frame color
GT1030-LBD
Display
LED Backlight
Black
GT1030-LBDW
Monochrome (black/white)
GT1030
GT1030-LBDW2
main unit
GT1030-LWD
NEW
GT1030-LWD2
NEW
GT1030-LWDW
NEW
GT1030-LWDW2
NEW
4.5-inch
EMC
LVD
RS-422/RS-232
°
—
°
RS-232/RS-232
°
—
°
RS-422/RS-232
°
—
°
(white/pink/red)
RS-232/RS-232
°
—
°
3-colors
RS-422/RS-232
°
—
—
(green/orange/red) 3-colors
DC24V
RS-232/RS-232
°
—
—
RS-422/RS-232
°
—
—
RS-232/RS-232
°
—
—
RS-422/RS-232
°
—
°
RS-232/RS-232
°
—
°
RS-422/RS-232
°
—
°
RS-422/RS-232
°
—
°
RS-232/RS-232
°
—
°
RS-422/RS-232
°
—
°
RS-422/RS-232
°
—
—
RS-232/RS-232
°
—
—
RS-422/RS-232
°
—
—
RS-422/RS-232
°
—
—
RS-232/RS-232
°
—
—
RS-422/RS-232
°
—
—
For GT1030,GT1020 (Power supply not needed)
—
—
—
GT10-C10R4-8P
FXCPU (MINI-DIN 8 pin) direct connectionRS-422 cable [1m]
—
—
—
GT10-C30R4-8P
FXCPU (MINI-DIN 8 pin) direct connection RS-422 cable [3m]
—
—
—
GT10-C100R4-8P
FXCPU (MINI-DIN 8 pin) direct connection RS-422 cable [10m]
—
—
—
GT10-C200R4-8P
FXCPU (MINI-DIN 8 pin) direct connection RS-422 cable [20m]
—
—
—
GT10-C300R4-8P
FXCPU (MINI-DIN 8 pin) direct connection RS-422 cable [30m]
—
—
—
GT10-C30R4-25P
QnA/ACPU (D-SUB 25 pin) direct connection RS-422 cable [3m]
—
—
—
GT10-C100R4-25P
QnA/ACPU (D-SUB 25 pin) direct connection RS-422 cable [10m]
—
—
—
GT10-C200R4-25P
QnA/ACPU (D-SUB 25 pin) direct connection RS-422 cable [20m]
—
—
—
GT10-C300R4-25P
QnA/ACPU (D-SUB 25 pin) direct connection RS-422 cable [30m]
—
—
—
GT10-C30R2-6P
QCPU (MINI-DIN 6 pin) direct connection RS-232 cable [3m]
—
—
—
GT01-C30R2-6P
PC (D-SUB 9 pin: female)<=>GOT (MINI-DIN 6 pin: female) connection RS-232 cable [3m]
—
—
—
—
—
—
—
—
—
White
Monochrome (black/white)
GT1020-LBD
(green/orange/red) 3-colors
DC24V
(green/orange/red)
3.7-inch
GT1020-LBL
Black
GT1020-LBDW
Monochrome (black/white)
GT1020-LBDW2 GT1020-LBLW
main unit
GT1020-LWD
NEW
GT1020-LWD2
NEW
GT1020-LWL
NEW
GT1020-LWDW
NEW
GT1020-LWDW2
NEW
GT1020-LWLW
NEW
GT10-LDR
DC5V DC24V
3-colors (green/orange/red)
3.7-inch White
Monochrome (black/white)
DC5V DC24V
3-colors (white/pink/red)
GT1020
DC24V
(white/pink/red) 3-colors
GT1020-LBD2
Memory loader
UL/cUL
PLC connection/PC
3-colors
4.5-inch
GT1030-LBD2
CE Power supply
DC5V DC24V
3-colors (white/pink/red)
DC5V
-RS-422 for PLC connection
Connection cable
-RS-232 for PLC connection
Data Transfer cable
RS-232/USB adapter
For GT1020,GT1030 (software:GT Designer2,GX Developer)
GT10-RS2TUSB-5S
Sold separately USB cable:GT09-C30USB-5P [3m] (Mistubishi Electric System Sarvis CO.LTD)
Connection cable for Bar code GT10-CO2H-6PT9P
Barcode reader (D-SUB 9 pin: female) GOT (MINI-DIN 6 pin: female) connection RS-232 cable [0.3m]
Options Division
Specifications
Model name -GT1050/GT1055 GT10-50PSGB
NEW
GT10-50PSCB
NEW
Antiglare, 5 sheets Clear, 5 sheets
GT10-50PSGW
NEW
Antiglare (frame: white), 5 sheets
GT10-50PSCW
NEW
Clear (frame: white), 5 sheets
GT10-40PSGB
NEW
Antiglare, 5 sheets
GT10-40PSCB
NEW
Clear, 5 sheets
GT10-40PSGW
NEW
Antiglare (frame: white), 5 sheets
GT10-40PSCW
NEW
Clear (frame: white), 5 sheets
-GT1040/GT1045
Protective sheet
-GT1030 GT10-30PSGB
Antiglare, 5 sheets
GT10-30PSCB
Clear, 5 sheets
GT10-30PSGW
Antiglare (frame: white), 5 sheets
GT10-30PSCW
Clear (frame: white), 5 sheets
-GT1020 GT10-20PSGB
Antiglare, 5 sheets
GT10-20PSCB
Clear, 5 sheets
GT10-20PSGW
Antiglare (frame: white), 5 sheets
GT10-20PSCW
Clear (frame: white), 5 sheets
Manuals
GT10-U-E
Battery
GT11-50BAT
GT10 User's Manual Battery for backup of clock data,(Apare parts for GT1050,GT1055,GT1030)
19
HEAD OFFICE: TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN
Note: The screens shown in this brochure are for presentation purposes only.
HIME-L025-A0809(MEE)
New publication, effective Sep.2008 Specifications subject to change without notice.