Wet Dust Collectors
• Whirl/Wet system uses very little water.
• 99% efficient over a wide range of micron sizes.
• Dust collector will not clog under severe operating conditions.
• Best technology for soluble and insoluble particulate.
Scrubbers
• NOx, SO2, HCl, Cl2, H2SO4
• Ideal for gas streams with high loadings or high chemical reactivity.
• Systems can incorporate particulate control.
• Used for odor control, adaptable to NOx with the multi-stage Tri-NOx system
Process Tanks
•
• Tanks
•
Contact:Steven Reyenga:sreyenga@pmi-pump.com or Randy Garner: jgarner@pmi-pump.com
• Screw Machine Capacity from 1/8” to 2-5/8” Diameter
• CNC Turning with Bar Feed Capability
• CNC Drilling, Tapping & Vertical Machining
• Horizontal & Vertical Milling
• Most Post-Machining Treatments: Heat Treating,Plating, Grinding,Etc.
• Component Assembly
The Char-Lynn motor range consists of three major types based on the valving used to distribute fluid through the Orbit gear set (geroler or gerotor), Spool Valve, Disc Valve and VIS (Valve-in-Star). A variety of displacement sizes are available in each of the three motor types to provide a wide range of speeds and torques.
power steering control units offer
• Minimal steering linkage reduces cost, provides design flexibility.
• Complete isolation of load forces from the control station.
• Continuous, unlimited control action with low output torque.
• Wide selection of control circuits and meter sizes.
• Works with many kinds of power steering pumps or fluid supply
Eaton Series 26 gear pumps with 13-tooth gears minimizes flow ripple to reduce noise and vibration. Bearing lubrication system uses inlet oil rather than high pressure oil, improving volumetric efficiency and power output. The 13 available displacements and many mounting configurations provide for an easy retrofit. Other Series available.
NUWAY THREAD PROTECTOR RECYCLING
VEGREVILLE, ALBERTA, CANADA
STARTS -THURSDAY, OCTOBER 17TH, 2024 - ENDS -TUESDAY, OCTOBER 22ND, 2024
• Franklin Miller Taskmaster TM3042 Shredder S/N 9210 (Tested), 50 HP., Belted infeed and outfeed conveyors, (See video)
• Grinder Dimensions (as supplied to auction company, purchaser responsible for their own inspection), (not including infeed and discharge conveyors): Input Width 29.75 (756 mm) * Input Length 42.25 * Height 18 (457 mm) * Overall Width 62.5 62.5 (1587.5 mm)
* Overall Length 134 (3404 mm) * Overall Height (Typical) 102 (2591 mm) Hopper Opening 56” x 42” (1422 mm x 1067 mm) * Shaft Size 5.5” Hex (140 mm) * Cutter Diameter 16” (406 mm) *
• Imported Pelletizer/shredder NVSN (Tested), 37 KW., Belted infeed conveyor, Screw discharge conveyor to bagger
• Whisperwatt Model DCA-300SSCU Diesel AC Generator 300 KVA, 3 Phase, 240/480 Volt, Cummins diesel power, S/N 9100253, mounted on a MQ T/A Trailer with unitized fuel tank Trailer S/N 1E9GF1520BR153067 * 18,000 hours on meter
• Whisperwatt Model DCA-70USJ, S/N 8300091, Three- and single-phase AC Diesel Generator, Trailer mounted with unitized fuel tank. 3 phase 70 KVA, 240/480 V, 1 phase 40 KW 120/240 V. John Deere diesel power. Trailer S/N 5SLBG2023BL006730, 1061 Hours on meter (low hours as reported to us as being a backup emergency generator)
• 2006 Selleck Model JCB 35D Telehandler S/N SLPTLT3D6E1174550, 9955 hours, (See Video)
• 2006 Genie Model GTH 5519 Telehandler, S/N 14354, 5537 hours on meter
• Hyster Model W25ZA2, 2500 lb electric pallet truck, S/N B495N02537P
• Daewoo G25S 5,000 lb. LPG Forklift, SN 12-05631 not operational
• Blue Giant model P130-25, 2500 lb. capacity pallet stacker, 130” lift, S/N 023-0557
• 2 other nonoperational pallet stackers
• 2020 Peterbilt 389 T/A Sleeper truck tractor, S/N 1XPXDP9X2LD635602, 748,000 km
• 2012 Dodge 5500 Flat deck truck, Toolboxes, Headache Rack S/N 3C7WDNFL9CG295793, 272,000 km
• 2000 Dodge 3500 Flat deck truck, 20 km on recently installed rebuilt engine with new starter and batteries, S/N 1FDAW57F4YEA49142, 632,740 km
• 2013 PJ 40’ T/A Dual Wheel Flat Deck Gooseneck Trailer with removeable side panels, 40’ Deck Length, S/N 4P5FD4021D1190954,
• 2014 Lamar 36’ T/A, Dual Wheel Flat Deck Gooseneck Trailer with removeable metal mesh side panels, 36’ deck length, 20,000 GVWR, S/N 5RVGN3623EM019187
• 1997 Norberts 30’ T/A Flat Deck Gooseneck Trailer with removeable side panels, 30’ Deck Length, S/N 2N9F7SC29VG017328
• 2016 Double A model GHD-208-18, 18’ T/A Dual Wheel Gooseneck Dump Trailer (Hydraulics Tested), S/N 2DAGC520XGT018279
• Maxey Trailers Model 83 WIDE GOOSENECK DUMP, 16’ T/A Gooseneck Dump Trailer, (Hydraulics Tested), S/N 2ATH05168AM016842
• Renegade Model 8000 Stretch Parts Washer (used once), S/N AW80275
• TMG GAC-40 40 Gallon Gas Driven Air Compressor, 1 hour usage, (see video), Note Battery not included
