IMP Issue 5-2-24

Decimal Inch Tape Measures; 25 ft/300in steel, $19.95 165 ft/1980 in steel, $135.00 120 in steel, $14.00

5 ft/60 in fabric, $5.00 lines for even hundredths of an inch, black numbers for tenths of an inch and inches, red numbers for feet and inches, magnetic three rivet hook, belt clip. Used by NASA for accuracy; Preschool to teach numbers, counting and measuring.

info@impmagazine.com

Bob Olsen x209

Dave Ernst x213

Jon Schneider x214 Dan Tepperman x223

Vince Merced x216

Bob Olsen x209

Henry J. Wineberg (1906 - 1983) PUBLISHER Joel Wineberg x204

Jeremy Solomon x202

Ashur Mikael x216

Ashley Chrzan x218

Contact:Steven Reyenga:sreyenga@pmi-pump.com or Randy Garner: jgarner@pmi-pump.com

ENM’s PT33A1 Series Compact Meter with Various Functions and Alert Systems is Ideal for Customers to get the most Relevant Information from their Battery Systems. The Unit has a Built in Hour Meter and Service Timer, a Battery Level Monitor and a Voltage Monitor all Designed to Gather Relevant Information about Your Battery in an Intuitive Manner.

NEW, USED & RENTALS

• Screw Machine Capacity from

Diameter

• CNC Turning with Bar Feed Capability

• CNC Drilling, Tapping & Vertical Machining

• Horizontal & Vertical Milling

• Most Post-Machining Treatments: Heat Treating,Plating, Grinding,Etc.

• Component Assembly

sales@rcmachining.com

The Char-Lynn motor range consists of three major types based on the valving used to distribute fluid through the Orbit gear set (geroler or gerotor), Spool Valve, Disc Valve and VIS (Valve-in-Star). A variety of displacement sizes are available in each of the three motor types to provide a wide range of speeds and torques.

STEERING CONTROL UNITS

Char-Lynn power steering control units offer these advantages.

• Minimal steering linkage reduces cost, provides design flexibility.

• Complete isolation of load forces from the control station.

• Continuous, unlimited control action with low output torque.

• Wide selection of control circuits and meter sizes.

• Works with many kinds of power steering pumps or fluid supply

GEAR PUMPS

Eaton Series 26 gear pumps with 13-tooth gears minimizes flow ripple to reduce noise and vibration. Bearing lubrication system uses inlet oil rather than high pressure oil, improving volumetric efficiency and power output. The 13 available displacements and many mounting configurations provide for an easy retrofit. Other Series available.

STANDARD 4 WAY ENTRY:

FOR OVER 40 YEARS, RABBIT TOOL’S ROTARY CUT-OFF MACHINES HAVE SERVED FABRICATORS OF ALL SIZES; OFFERING FAST, CLEAN CUTS ON ROUND PIPE AND TUBE. CONTINENTAL IS NOW GEARING UP TO PRODUCE AND SUPPORT THESE EFFICIENT, ECONOMICAL MACHINES. CONTINENTAL HAVE BEEN EXPERTS IN ROTARY CUT-OFF SINCE 1919 AND WE’RE EXCITED TO BE ADDING THESE BIRKESTRAND DESIGNED MACHINES TO OUR OFFERING

SUPERCUTTER TUBE CUT-OFF MACHINES

CUT ROUND PIPE OR TUBE

DB-SERIES TUBE END DEBURRING

CHAMFER AND DEBURR PIPE

PR-SERIES TUBE END PINCH

UPCOMING AUCTIONS 2

•

•

• (2) Forklifts

• Lathe

•

• (4) Surface Grinders

• Bridge Crane

• Acorn Welding Table

• (13) Kurt Vises

• (2) Scrap Hoppers

• Marvel Spartan Saw

• Peerless Vertical Saw

• Huge Assortment of Cat 40 Tool, Shop supplies, Inspection Tooling and so much.

• Do not miss this Auction!

LIVE WEBCAST

Siding Table; Job Smart Sand Blaster; Milwaukee 12” Saw on Gravity Stand; Bosh 10” Portable Table Saw on Gravity Stand; De Walt; Double Tank Air Compressor; Air Tank; Tool Cleaning Cabinet; Wood Stove; Grizzly 5 Hp. Elec. Motor w/Switch; Z Series Table Saw; 3 Hp. Planer; 24” Drum Sander Shaper; Shop Box; Craftsman 6” Joiner; Milwaukee - Right Angle Drill, 12 Volt Impact, Saw Z All, Hole Saw Kit); Routers & Bits; Porter Cable Belt Sander; De Walt Laser Levels; Asst’d De Walt Drills; Skil Saws; (4) Bostitch Nailers; Air Stapler; Cap Nailer; Senko Finish Nailer & Battery Finish Nailer; David White Laser Level; Roto Zip; 12 Volt Multi Tool; Makita Saw; Asst’d Shop Vacs; Porta Nailer; Atro Nailer; Felker Tile Master; Tap Co. Universal Break Buddy; Masonry Tools; Work Platform; Stainless Sink; Collection of Asst’d Saw Blades; Asst’d Wood Clamps; 14” Circular Saw; Submersible Pump; Barn Fans; Meat Slicer; Meat Grinder; (5) Climbing Tree Stands; Ladder Stand; 21’ pc. Hand Rail; PVC Pipe Collection; Asst’d Shingles; Asst’d Tin; Ceramic Tile; Asst’d Exterior & Interior Doors; Lighting; Trac Lighting; Electrical Items; Plumbing; Metal Cabinets; Coil Nails; Stick Nails; Galvanized Nails; Staples; Screen; Synthetic Felt; Oak Flooring; Ext. Jams; Black Formica; Door Locks; Lock Sets; Post Bases; Vinyl Stair Treads; 130 ft. of 6” Drain Tile; Asst’d Hangers & Plates; 6” Seam Tape; Collection of Siding; Roofing Materials; Pex O2 Barrier for Concrete Flooring; Rubber Roofing.

LIQUIDATION AUCTION

-JUKI Commercial Sewing Machines; 2 Needle Sewing machine; 220 Sewing Machine; Custom Made Soft Brush Rolls; 12 Ft. Metal Factory Carts; Metal Rolling Carts; Factory Storage Bins; Factory Racking; Other Brush Items.

-(2) Quincy 1-Phase (230) Air Compressors; Milling Machine; Bearing Press; Table Saw; WELLS Metal Cutting Saw w/Roller Guides; Several Floor Model Drill Presses; Large Metal Lathe; Double Grinder; ARCO Welder; Shop Blowers; Shop Fans; Craftsman Drill Press; Cement Mixer; Delta Model-20 Band Saw; Toledo 1000 Scale; Box Stapler; Glue Gun; Parts Rack; Step Ladders; Banding Machine; Wells Band Saw; Port -A Trace; Loading Dock Plate; Some Scrap Metals; Floor Model Drill Presses; Shop Tools; Nut and Bolt Supplies; Work Table; Small Band Saw; Shop Tools; Plus Much More Found Around Commercial/Industrial Site for Over 50 Years!!!

Asking $50,000 with Patent: U.S. Reg. No. 2462762

Lot-A) 7 Ft. Wide HAIRE “Cloth Cutting Machine” Includes an Assortment of DIES.

LOT A & B TERMS: Selling subject to sellers approval. Asking price located above, will be taking offers day of auction.

Asking $25,000

Lot-B) CARLSON “Tire Brush Machine”

LAB AUCTION

Beckman Biomek 4000 Lab Workstations, Powerex Air Compressor, Rotary Air Compressors, 5) Kinney KT1500 New and Used Vacuum Pumps, New and Used Motors, Pumps, Bar Coders, Inkjet Marking Machines, Vacuum Pumps, Mitsubishi and Allen

THOMAS METAL SUPPLY – CLEVELAND, TN • ONLINE ONLY BIDDING AUCTION

LOTS WILL START ENDING ON THURSDAY, MAY 2 @ 7:00PM EDT – SOFT CLOSE

5546 Waterlevel Highway – Cleveland, TN 37323

Over 500 Lots to bid on!!! This is the remaining inventory and office furnishings of the Thomas Metal Supply Inc. business in Cleveland, TN. There is a 2007 Ford F-250 Gas Pickup Truck w/ladder rack, 2002 GMC C6500 26 Ft. Box Truck w/Side entry door and lift gate, 12,000 lb. Hyster Forklift (both vehicles and forklift do run), There are several rooms of Big Game Trophy Mounts (lots of condition issues, please attend preview and inspect for yourself) Antlers and Skins, office furniture, Artwork and collectibles, Gutter Machinery: Elbow Forming Machines, Coiler/Uncoilers, Slitters, Technobend Long Length Folder, Brake, Gutter Machines, Standing Seam Machine and others; Gutter Elbows, Vinyl Siding, Downspouts, End Caps, Inserts, Vinyl Railing Parts, Vinyl Roof and Shutter Parts and Lots, Lots more!!!

You seriously need to preview this auction!!!! We understand Cleveland is a ways from Knoxville but to truely know what you are bidding on and what you are getting and the condition of these items, you need to see them for yourself!!! We just can’t stress the importance enough of inspection for this auction!!!

conducts car auctions with both live and online bidding. Our auto auctions are open to both the general public and dealers. YOU DO

Hammers, Drill Bits up to 2″, HTC Hydraulic Press, Sheel Metal Form Rollers, Bench Grinders, Gas Powered Truck Mount Miller Welder, Aluminum Stock, Precision Drill Press, 190 lb. Anvil, Wire and Stick Welding Feed, Air Compressor and Lots More!!! Must see to appreciate!!! RABY COLLISION CENTER • ONLINE ONLY BIDDING AUCTION FRIDAY, MAY 17 AT 12PM NOON EDT 4863 Highway 411, Cleveland, TN 37323

Several Miller Welders, Plazma Torches, Metal Lathe, Die Machine, Rockwell Angle Grinder, B&D Industrial Rotoary Hammers, Drill Bits up to 2″, HTC Hydraulic Press, Sheel Metal Form Rollers, Bench Grinders, Gas Powered Truck Mount Miller Welder, Aluminum Stock, Precision Drill Press, 190 lb. Anvil, Wire and Stick Welding Feed, Air Compressor and Lots More!!! Must see to appreciate!!!

AUTO AUCTION • BID LIVE OR ONLINE SATURDAY, MAY 18 2024 AT 9:00AM (ET) 6723 Pleasant Ridge Road, Knoxville, TN 37921

Buy like the dealers do the 1st & 3rd Saturdays of each month, Powell Auto Auction conducts car auctions with both live and online bidding. Our auto auctions are open to both the general public and dealers. YOU DO NOT NEED A DEALER LICENSE TO ATTEND OR BID IN OUR AUCTIONS!

FOR 74 YEARS, INDUSTRIAL MARKET PLACE HAS HELPED THESE AUCTIONEERS – AND HUNDREDS MORE – REACH BIDDERS AND BUYERS!

CONTRACT MANUFACTURER OF 3D METAL PARTS FOR THE AEROSPACE AND DEFENSE INDUSTRY

3D PRINTING EQUIPMENT &

ACCESSORIES

3D PRINTING EQUIPMENT & ACCESSORIES

 12 lasers, 1000 watts each

 12 lasers, 1000 watts each

SLM NXG XII 6OO

SAPPHIRE XC

 5 times faster than a printer with 4 lasers

 5 times faster than a printer with 4 lasers

 Build Chamber 23.625”sq. x 23.625”h

 Build Chamber 23.625”sq. x 23.625”h

 Multiple redundancies in the build area

 Multiple redundancies in the build area

 Programmed to print parts with Inconel 718

 Programmed to print parts with Inconel 718

In early 2024 the SLM 600 will be upgraded to a SLM 600E. The Build Chamber will increase to 23.625”sq. x 59.0625”h.

Metal 3D printing can have a transformative impact on a number of key parts. Some tried and true applications for AM metal parts have been:

In early 2024 the SLM 600 will be upgraded to a SLM 600E. The Build Chamber will increase to 23.625”sq. x 59.0625”h.

 Build Chamber 36”w x 24”h x 36”d



 Available Materials:

 Available Materials:

The F900 uses Stratasys ProtectAM technology to provide a variety of secure connectivity solutions, including STIG compliance that satisfies U.S. government DOD requirements.

ALLOWS FOR COMPLEX DESIGN

The F900 uses Stratasys ProtectAM technology to provide a variety of secure connectivity solutions, including STIG compliance that satisfies U.S. government DOD requirements.

 8 lasers,1000 watts each

 8 lasers,1000 watts each

 Build Chamber 23.62”dia. x 21.65”h

DESIGN CHANGES ARE EASIER  NO TOOLING COST  SHORTER LEAD TIMES FOR PROTOTYPES  MINIMAL WASTE; MATERIAL USED  WEIGHT REDUCTIONS POSSIBLE  LESS DEPENDENT ON

Metal 3D printing can have a transformative impact on a number of key parts. Some applications for AM metal parts have been:

 Build Chamber 23.62”dia. x 21.65”h

 Programmed to print parts with Inconel 718

 Programmed to print parts with Inconel 718

 Software enables SupportFree Geometries

 Software enables SupportFree Geometries

 Features ASSURE quality control verification

 Features ASSURE quality control verification

The Sapphire XC will soon be upgraded to a Sapphire XC 1MZ. The Build Chamber will be increased to 23.625” dia. x 39.375” in height.

The Sapphire XC will soon be upgraded to a Sapphire XC 1MZ. The Build Chamber will be increased to 23.625” dia. x 39.375” in height.

ADVANTAGES OF 3D METAL PRINTING:

ALLOWS FOR COMPLEX DESIGN GEOMETRIES

DESIGN CHANGES ARE EASIER NO TOOLING COST

SHORTER LEAD TIMES FOR PROTOTYPES

MINIMAL WASTE; MATERIAL USED EFFICIENTLY

POST PROCESSING: EDM Cutting, CNC Milling, Lathe Turning, Ultrasonic Cleaning,

SLM NXG XII 6OO

POST PROCESSING: EDM Cutting, CNC Milling, Lathe Turning, Ultrasonic Cleaning, Depowdering

ULTRA PRECISION LATHE AND MILL MODELS

• The Highest Level of Quality and Precision in a Bench Top Mill available anywhere on the marke

• Extra-size column for unmatched rigidity

• Super-accurate hand-scraped ways and gibs

• Precision-ground spindle, cool-running triple bearings

• Quiet belt driven spindle - no gearsvariable speeds to 4000 rpm

• Worm drive for easy head tramming, 100% Made in Taiwan

• One shot lube pump for ways, extends machine life and saves time

• Generous X, Y and Z-axis travels

• Quill DRO included

• Ultra High Quality Milling Machine, 100% Made in Taiwan. Top Of The Line Machine Without Question

• Built For Those Users Who Do Not Want To Sacrifice Quality

• Full Featured Head, With Power Feed On Quill For Boring Operations, Etc.

• Turcite B Way Coating, Provides Very Smooth Movements In Table and Longer Life

• High Grade Meehanite Castings Used Throughout Machine

• Industry Leading 5 YEAR WARRANTY

• Extremely High Quality Lathe, meant for very high precision work, and suitable for every day use. Perfect for the professional user who is looking for the best available

• 100% Made in Taiwan, no shortcuts taken, built to a very high level of quality

• Available in either Single or 3 Phase Power, to match the user’s needs

• Priced very, very reasonably when compared with other similar high quality models – and no one out there has the 2″ Spindle bore in a machine from Taiwan. Compare Carefully...

• Extremely High Quality Lathe, meant for very high precision work, and suitable for every day use. Perfect for the professional user who is looking for the best available machine

• 100% Made in Taiwan, no shortcuts taken, built to a very high level of quality

• Very heavy duty machine, almost 2 tons of iron in these models

• Priced very, very reasonably when compared with other similar high quality models – and no one out there has the 2.55 inch Spindle Bore Compare Carefully

– $19,999.00