LIVE WEBCAST AUCTION
KERN LASER SYSTEMS •
•
WITH FUME EXHAUST
• GANTRY ARM FUME EXHAUST
• S-FOCUS 2.5″ FL LENS ASSEMBLY WITH AIR ASSIST
• K-VISION JOB I.D. CAMERA PAGE FRAME
• S&A CW6000 CHILLER
• (2) 3 HP BLOWERS
• VIDEOS AVAILABLE FOR ALL MACHINES
info@impmagazine.com
Bob Olsen x209
Dave Ernst x213
Jon Schneider x214 Dan Tepperman x223
Vince Merced x216
Bob Olsen x209
Henry J. Wineberg (1906 - 1983) PUBLISHER Joel Wineberg x204 ART/PRODUCTION
Jeremy Solomon x202
Ashur Mikael x216
Ashley Chrzan x218
Contact:Steven Reyenga:sreyenga@pmi-pump.com or Randy Garner: jgarner@pmi-pump.com
Weir Enterprises, LLC
• Screw Machine Capacity from 1/8” to 2-5/8” Diameter
• CNC Turning with Bar Feed Capability
• CNC Drilling, Tapping & Vertical Machining
• Horizontal & Vertical Milling
• Most Post-Machining Treatments: Heat Treating,Plating, Grinding,Etc.
PUMPS
FILTRATION
The Range of Filter Solutions Implemented at Argo-Hytos Extends From Fixed-Position Industrial Plants to Highly Mobile Applications, Primarily Tailored to Individual Customer Requirements..
•Suction Filters
•Return and ReturnSuction Filters
•Pressure/High Pressure Filters
•Filling and Ventilating Filters
•Filter Accessories
•Sensor Technology
ARGO-HYTOS HYDRAULIC PRODUCTS
A Strong Brand in Fluid Technology
Argo-Hytos Combines the Strengths of Two Major European Hydraulic Manufacturers.
DIRECTIONAL CONTROL VALVES
D02/D03/D05/D07/D08
Argo-Hytos DC and Dual Frequency AC Coils Can to be Rotated to Locate Connectors to Your Needs. DIN, Deutsch Flying Leads and Wire Box Connections are Available as Standard Manual Override. Full Line of Sandwich Controls.
GEAR PUMPS
Argo-Hytos Gear Pumps Provide High Reliability, High Volumetric Efficiency, and Low Noise Levels over the Entire Operating Range.
• Component Assembly
THREE SERIES:
BATTERY INDICATORPT33 SER
ENM’s PT33A1 Series Compact Meter with Various Functions and Alert Systems is Ideal for Customers to get the most Relevant Information from their Battery Systems. The Unit has a Built in Hour Meter and Service Timer, a Battery Level Monitor and a Voltage Monitor all Designed to Gather Relevant Information about Your Battery in an Intuitive Manner.
STANDARD 4 WAY ENTRY:
LATHES - MILLS - DRILLS - GRINDERS ALL GUARANTEED
21”/29” X 80” / WHACHEON GEARED HEAD GAP BED ENGINE LATHE, MODEL. 20 1/2G X 80 WITH 28-1850 RPM’S, 16” 4-JAW, INCH/METRIC THREADING, LIVE CENTER, QC TOOLPOST, STEADY, FOOT BRAKE.
BRIDGEPORT SERIES 1 VERTICAL MILL W/2HP VARIABLE SPEED, 2J HEAD, 9 X 42 TABLE, ACU-RITE III DIGITAL READOUT, BRIDGEPORT POWER DRAW BAR, POWER FEED, CHROME WAYS. (STOCK # 1733)
SOLBERGA 22” GEARED HEAD DRILL PRESS MODEL SE NR7
19” X 80” SUMMIT MODEL 19-3X80 GAP BED ENGINE LATHE W/TAPER, NEWALL DIGITAL READ-OUT, SWINGS 27” IN GAP, WITH BISON 12” 3-JAW, COOLANT SYSTEM, STEADY, TAPER, QC TOOLPOST, INCH/METRIC THREADING.
17” X 85” NARDINI-CLAUSING ENGINE LATHE MODEL1785E W/ 25-2000
RPM’S, TRAK 1 AXIS DRO, INCH/METRIC THREADING, 10” 3-JAW CHUCK
BRIDGEPORT SERIES 1 VERTICAL MILL W/2HP VS 2J HEAD, 9 X 42 TABLE, SONY MILLMAN DIGITAL READOUT, NEW POWER FEED, CHROME WAYS. (STOCK # 1655) ACER E-MILL MODEL EVS3VKH 3 HP VERTICAL MILLING MACHINE WITH VECTOR TYPE AC FREQUENCY INVERTER DRIVE. (STOCK # 1543)
20” WILTON GEARED HEAD ROUND COLUMN DRILL PRESS MODEL 20720, DRILLING CAPACITY MILD STEEL 1
13” COLUMN X 4’ ARM OOYA MODEL RE2-1300A RADIAL DRILL. DRILLING CAPACITY –MILD STEEL: 2-1/4
UPCOMING AUCTIONS
FEATURING: (33) WATERBURY FARREL, ASAHI-SEIKI, & MAGNUM Transfer Presses, (7) NATIONAL & MANVILLE WATERBURY Cold Headers, (14) COILMATE Pallet Decoilers, 200 Ton Wire Extruder, 2009 SODICK AQ327L Wire EDM, Complete Machine Shop, Forklifts, MRO, Support Equipment, and Brand Assets Incl. Montana Gold Bullet™ Name, Logo, Domain, and Customer List
FEATURING: (3) MAZAK INTEGREX Mill/Turn Machines, Various Models, New as 2008; (4) HAAS VF-4SS & VF3SS 5 Axis VMC’s, New as 2011; 2011 TSUGAMI S206 Swiss Turn Machine; (2) SODICK Wire EDM’s, (2) MTS 858 Mini Bionix II Test Systems, MITUTOYO PH-A14 Optical Comparator, Laser Marking Systems; Extensive QA Department; Factory Support Equipment, and More
FEATURING: 2017 SNK RB-5M CNC Bridge Mill, 2011 Kuraki KBT-13A CNC HBM, 2011 Mazak VCN 510C/50-II VMC, 2008 Mazak Integrex 200-IV ST CNC Multi-Tasking Machine, 2008 Mazak QTN 200-II MY Turning Center, (6) OKK HMC’s & VMC’s, 2010 Zeiss Accura 12/18/10 CMM, Amada 220 Ton CNC Press Brakes, (35+) Welders, Workholding Fixtures, Tooling, Support and more!
FEATURING: MILLER / PerformArc Robotic Welding Cell, MINSTER E2-200 Hevistamper S.S. Press, MINSTER S1-125 S.S. Press, (12) MINSTER, BLISS, SOUTH BEND, PRECISION INDUSTRIES, & ROUSSELLE OBI Presses, Multiple ROUSSELLE 15-25 Ton OBI Punch Presses, Coil Handling, Shear, Mills, Grinders, Welders, CHMER CW430S EDM, Forklifts, Tool Room, & Support Equipment
FEATURING: 2013 HAAS MDC500 VMC, 2013 HAAS VF-3SSYT VMC, 2006 HAAS VF-3B VMC, 2004 DAEWOO Puma V400 VTL, MORI SEIKI VL-25 VTL, MAKINO & MORI SEIKI HMC’s, (4) TAKAMAZ XC-100 Automated Turning Centers as New as 2012, 2005 HARDINGE Quest 8/51 Turning Center, 2002 HAAS SL10T Turning Center, Tooling, Workholding & Plant Support
FEATURING: CHEVALIER & HARIG Surface Grinders, MYFORD & NORTON Cylindrical Grinder, HEALD ID Grinder, Pedestal Grinders, Tool Grinders, BRIDGEPORT & CHEVALIER Vertical Mills, CINCINNATI Horizontal Mill, LEBLOND & HERCULES AJAX Engine Lathes, WELLSAW & DOALL Bandsaws, INGERSOLL RAND Air Compressor, KURT Vises, Tooling, Power Tools & Support Equipment
• TRAILERS • MOWERS
• CHAIN SAWS & PARTS
• GENERATORS • AIR COMPRESSORS
• HEATERS • POLARIS ENGINES
Everlite 14’ dual axle all aluminum flatbed trailer; dual axle 12’ power dump trailer, 10,000 lbs. GVW, power jack; single 7’ single axle power dump trailer power jack; Simplicity Citation Commercial zero-turn mower, 23 hp, 52” deck; Pulsar 150cc OHV Push Mower; Trac Vac pull-behind collection system, complete; Onan Pro 5000E Generator, elec. start; Reddy Heater 35,000 BTU; Master MH-135T-KFA 135,000 BTU Heater; Husqvarna 346 XP Chainsaw, needs bar; Husqvarna 335 XP Chainsaw; Husqvarna 460 Chainsaw, needs bar; Husqvarna T540XP Chainsaw; Husqvarna 346 XP Chainsaw; Husqvarna Chainsaw incompletes, parts; Many Woodland Pro Chains Complete and New/Used; Quincy QT Pro 7.5 hp 80-Gallon Two-Stage Air Compressor (460V 3-Phase); Ridgid 10.3 SCFM 9-Gallon 135 psi Gas Air Compressor; Polaris Model #EC65PL-01, 848CC Engine; Polaris Model #EC65PL-01, 648CC Motor INDUSTRIAL TOOLS • WELDERS • RAW METAL • PRESSES
LaGun Republic FTV-2 Vertical Milling Machine w/MiniWizard Motherboard; Clausing Model #7229 Lathe; Jet Horizontal Miter Band Saw Model #MBS-10M, 2 hp 3 Phase; Atlas Lathe; Craftsman 20” Drill Press; Miller Econotig Welder; Miller Millermatic 250 Welder; Lincoln AC 225 Arc Welder; Welding Rods, Masks, Equipment; Acetylene Torches, Tanks, Equipment; (2) 1-Ton Ceiling Lifts w/chains; Aluminum Sheets; Metal Welding Pieces; Scrap Metal; Metal Piping; Hydraulic Cylinders; 12-Ton Shop Press Model #928; Pipe Bender; 32-Ton Hydraulic Jack Press; WOOD SHOP TOOLS • TOOLS • POWER EQUIPMENT CHARGERS • MISCELLANEOUS TOOLS & PARTS
Many DeWalt Power Drills, Grinders, Hand Power Tools, Batteries, Chargers; Delta 15 amp Compound Miter Saw; Craftsman 3 hp Table Saw; Air Compressor Hoses, Parts; Log Chains; Fast Charger 40/200 Charger; Solar 450 Booster Charger; Schumacher 10 amp charger; Battery Tender; Many Trailer Hitches, Parts, Pumps, Jacks; Caster Wheels; Skid Loader Pallet Forks Only; Bottle Jacks; 5th Wheel; Gooseneck Hitches; Multiple Ladders; Multiple Crank and Grip Vises; INCREDIBLE amount of tool chests and drawers; Airlift Tables; Mityvac Model MV8500 Plasma Guide; Stant ST 270 Cooling System Pressure Tester; Hydraulic Wire Crimping Tool; ES 328 EZ-Tach+; Auto Link Code Reader; Lincoln Power Greaser; Proto J6125F Dial Torque Wrench; Milwaukee 11/4” Drill Motor FURNITURE • ANTIQUES
Dining Room Table w/leaves and 4 chairs; 3-seat sofa recliner; 2-seat sofa recliner w/cup holders; large sectional; Pabst Blue Ribbon Hanging Ceiling Light; Pabst Blue Ribbon Clock Light; Pepsi Cola Wall Hanger; Pabst Blue Ribbon Light Box
FOR 74 YEARS, INDUSTRIAL MARKET PLACE HAS HELPED THESE AUCTIONEERS – AND HUNDREDS MORE – REACH BIDDERS AND BUYERS!
ULTRA PRECISION LATHE AND MILL MODELS
• The Highest Level of Quality and Precision in a Bench Top Mill available anywhere on the marke
• Extra-size column for unmatched rigidity
• Super-accurate hand-scraped ways and gibs
• Precision-ground spindle, cool-running triple bearings
• Quiet belt driven spindle - no gearsvariable speeds to 4000 rpm
• Worm drive for easy head tramming, 100% Made in Taiwan
• One shot lube pump for ways, extends machine life and saves time
• Generous X, Y and Z-axis travels
• Quill DRO included
• Ultra High Quality Milling Machine, 100% Made in Taiwan. Top Of The Line Machine Without Question
• Built For Those Users Who Do Not Want To Sacrifice Quality
• Full Featured Head, With Power Feed On Quill For Boring Operations, Etc.
• Turcite B Way Coating, Provides Very Smooth Movements In Table and Longer Life
• High Grade Meehanite Castings Used Throughout Machine
• Industry Leading 5 YEAR WARRANTY
• Extremely High Quality Lathe, meant for very high precision work, and suitable for every day use. Perfect for the professional user who is
•
• Available in either Single or 3 Phase Power, to match the user’s needs
• Priced very, very reasonably when compared with other similar high quality models – and no one out there has the 2″ Spindle bore in a machine from Taiwan. Compare Carefully...
• Extremely High Quality Lathe, meant for very high precision work, and suitable for every day use. Perfect for the professional user who is looking for the best available machine
• 100% Made in Taiwan, no shortcuts taken, built to a very high level of quality
• Very heavy duty machine, almost 2 tons of iron in these models
• Priced very, very reasonably when compared with other similar high quality models – and no one out there has the 2.55 inch Spindle Bore Compare Carefully
$16,999.00 – $19,999.00 $11,599.99
• Ingersoll Rand Compressor S/N 678384253789
• 20 Ton Press
• Bridgeport Radial Drill
• Toolbox of Tools
• Metal Shelf
• Bar Cooler
• Metal Shelf
• Yellow Parts Car
• Wood Shelf
• Inventory Steel Bars, Steel Rods
• Hyd-Mech S-20 Horizontal Band Saw Series II
• KB-45 Metal Band Saw
• Sharpe 1440F Metal Lathe S/N 23654
• Old Forklift Propane Powered
• ML-17 x 60 Metal Lathe
• Metal Shelf
• Metal Storage Cabinet
• Bridgeport EZ Path Vertical Turning Lathe S/N 002-080498-325
• Benches
• Delta Drill Press
• Metal Storage Cabinet
• Shop Vac
• Desk
• Grey Toolbox of Tools
• Craftsman Toolbox of Tools
• All Office Equipment
• Shelving
• Grey Toolbox of Bits
• Hand Tools and Misc.
• Red Toolbox of Tools
• Large Assortment of Drill Bits
• Parts Bins and Hand Tools
• Wood Cabinets of Parts for Machinery
• Top Well Vertical Drill Milling Machine
• 2 Bench Grinders
• Dollie
• Table Top Drill Press
• Chop Saw
• Counter with Mounted Drill Press
• Zeks Air Compressor Head
• Parts Cleaner
• Set of Tires
• Pallet Jack
• Metal Benches
• Golf Clubs
• Fridge
• Air Hose
• Snow Blower and Vacuum and Misc.
• Metal Shelf
• Bit Storage Cabinet
• Glass Showcase
