F ire-rated Downlights AESTHETIC LUXURY CANLESS integral-LED.com
Inspirational lighting ideas
Inspirational lighting ideas
The Evofire Fire-rated downlight range gives a luxurious and attractive designer look with a choice of finishes and light appearance to enhance any room.
For a great ambience
WarmTone
For the full specification go to www.integral-LED.com 2
Dimmer the light, the warmer the colour
For the full specification go to www.integral-LED.com 3 Recessed with High CRI High Lumens Evofire Satin Nickel Round Recessed with High CRI GU10 lamp (dimmable option) Low CRI Medium CRI Integral High CRI Luxury downlight with low glare and vibrant real colours For a bright light with a dimmable option See Real Colour with high CRI
Inspirational lighting ideas
Insulation rolls are easily laid Canless design for good airflow
Insulation guard option
Evofire White Round (with insulation guard) and Classic Warm White dimmable GU10
Ideal for a spread of light with fewer downlights
Wide Beam angle
For the full specification go to www.integral-LED.com 4
55° 36°
Wider beam angle
Ideal for replacing old downlights with a range of cut-outs
Evofire 70-100mm Cut Out
Reduces the need for redecoration
For an attractive and discreet look (small 45mm cut-out and bright 390 lumens)
Evofire Mini
For the full specification go to www.integral-LED.com 5
Small and discreet
Take advantage of the benefits of Evofire downlights
Ultra-thin 1mm “blend-in” bezel with a premium finish for an attractive look in any room
Low profile, lightweight and durable
provides a barrier below the ceiling with a compliant fire-rated design
1. Open the protective cover
2. Prepare the incoming solid wires (0.75 to 2.5mm2 are recommended)
Patented design
3. Strip enough insulation to expose 8-10mm of solid copper
4. Push the wires into the connector sockets
Traditional can design
5. Push the incoming wires into the slot to ensure a rm grip
6. Tug slightly on the incoming wires to check if they are secured
Check out the full range
Complies to BS476 Part 21:1987
Complies to building regulations: Parts B, C, E and L
For the full specification go to www.integral-LED.com 6
30 min Fire Rated 60 min Fire Rated 90 min Fire Rated Fire rated compliance by UKAS Warringtonfire Ideal for bathrooms Via a push fit loop in/out connector with optional insulation guard
due to
with an open design that is easy to install and remove and delivers an extended lamp life
decent heat dissipation
and patented in the UK
Integral LED with a 3 year warranty
Engineered
by
Available in a range of finishes, sizes and shapes including recessed versions for low glare
7. Re t the protective cover Easily add insulation rolls IP65 Rated Fast and efficient installation
A fire-resistant glass and steel body
1mm bezel
Evofire Fire-rated downlights
A modern and practical innovation for an attractive look
With over one million units sold and counting. The Evofire range from Integral LED has become the go-to product for many contractors and consumers for domestic and commercial use.
The revolutionary canless, patented and compliant fire-rated design offers practical benefits for installation and appearance with an extended lamp life.
With many 5 star reviews and great feedback on the key benefits, we continuously receive repeat purchases.
CONSUMERS
“A modern look for my kitchen, replacing tired and dated spotlights.”
• Looks great in any ceiling
• Long-term durability with steel construction
• Very cost-effective with an extended lamp life
• Sustainable with lamp replacement
• Energy-saving – with a choice of efficient LED lamps
ELECTRICAL CONTRACTORS
“Top quality fitting, great design and easy to fit.”
• Effortless to install and remove and avoids ceiling damage
• Low profile for tight spaces
• Fast wiring via a push-fit, loop-in/out connector
• Conveniently placed loft insulation (insulation guard version)
• Suitable for bathrooms (IP65 rated)
• Good flexibility for refurb projects (70-100mm cut-out version)
ARCHITECTS, LIGHTING DESIGNERS & SPECIFIERS
• An attractive designer look from a 1mm “blend-in” bezel
• A range of premium finishes for an array of interior designs
• UK compliance (Fire-rated)
• A low glare presence (recessed version)
• Choose from a variety of GU10 lamps with colour, brightness, high CRI and dimmable options
• Great quality and price
For the full specification go to www.integral-LED.com 7
MR11
Bright lumen output up to 380lm
Great value and performance
Classic look and feel
FIRE-RATED MINI DOWNLIGHT WITH A DISCREET APPEARANCE
• For MR11 12V GU4 or MR11 240V GU10 lamps
• A small 45mm cut-out - ideal for new builds
38.5mm
• Choose from a selection of lamps including a brightness of up to 390 lm
• Low profile
• 30/60/90 mins Fire-rated
• Aesthetic - ultra-thin 1mm “blend-in” bezel
• Easy to install - canless design with loop-in/out key connector
• Durable steel construction
• IP65, suitable for bathrooms
Choose from a selection of Integral LED lamps including a brightness of up to 390 lm
MR11
Great value and performance
Dimmable and non dimmable option
Classic look and feel
Product Code Watts Temp K Lumens Beam Angle Pic. MR11 - NON-DIMMABLE 12V ILMR11NC009 3.7 2700K 380lm 36° 1 ILMR11NE010 3.7 4000K 390lm 36° 1 MR11 - NON-DIMMABLE 240V ILMR11NC007 3.4 2700K 300lm 36° 2 ILMR11NE008 2.8 4000K 300lm 36° 2 MR11 - DIMMABLE 240V ILMR11DC011 3.2 2700K 330lm 36° 2 ILMR11DE012 3.2 4000K 330lm 36° 2
12V GU4
240V GU10
1 2
ACTUAL SIZE Product Code Cut-out mm Finish Insulation Guard MR11 Holder Loop-in/out connector Diameter x Depth Pic. White ILDLFR45D037 45mm White - - Yes 64 x 38.5mm 1 Satin Nickel ILDLFR45D038 45mm Satin Nickel - - Yes 64 x 38.5mm 2 Polished Chrome ILDLFR45D039 45mm Polished Chrome - - Yes 64 x 38.5mm 3 Antique brass ILDLFR45D041 45mm Antique Brass - - Yes 64 x 38.5mm 4 Copper ILDLFR45D043 45mm Copper - - Yes 64 x 38.5mm 5 Black ILDLFR45D040 45mm Black - - Yes 64 x 38.5mm 6 Black Chrome ILDLFR45D051 45mm Black Chrome - - Yes 64 x 38.5mm 7 3 year warranty 1 2 4 6 3 5 7 (Lamp and holder not included) 65 IP Rating 30 min Fire Rated 60 min Fire Rated 90 min Fire Rated Fire rated compliance by UKAS Warringtonfire For the full specification go to www.integral-LED.com 8
70mm cut-out Round
For the full specification go to www.integral-LED.com 9 3 9
White Round ILDLFR70D001 70mm White - - Yes Yes 85 x 39mm 1 ILDLFR70D001-4 70mm White 4 Pack - Yes Yes 85 x 39mm 1 ILDLFR70D011 70mm White - Yes 85 x 39mm 1 ILDLFR70D012 70mm White Yes - Yes 85 x 83mm 2 ILDLFR70D003 70mm White - Yes Yes Yes 85 x 83mm 2 ILDLFR70D003-3 70mm White 3 Pack Yes Yes Yes 85 x 83mm 2 Satin Nickel Round ILDLFR70D002 70mm Satin Nickel - - Yes Yes 85 x 39mm 3 ILDLFR70D002-4 70mm Satin Nickel 4 Pack - Yes Yes 85 x 39mm 3 ILDLFR70D004 70mm Satin Nickel - Yes Yes Yes 85 x 83mm 4 ILDLFR70D004-3 70mm Satin Nickel 3 Pack Yes Yes Yes 85 x 83mm 4 Polished Chrome Round ILDLFR70D017 70mm Polished Chrome - - Yes Yes 85 x 39mm 5 ILDLFR70D018 70mm Polished Chrome - Yes Yes Yes 85 x 83mm 6 Black Round ILDLFR70D028 70mm Black - - Yes Yes 85 x 39mm 7 ILDLFR70D029 70mm Black - Yes Yes Yes 85 x 83mm 8 Antique Brass Round ILDLFR70D045 70mm Antique Brass - - Yes Yes 85 x 39mm 9 ILDLFR70D046 70mm Antique Brass - Yes Yes Yes 85 x 83mm 10 Copper Round ILDLFR70D047 70mm Copper - - Yes Yes 85 x 39mm 11 ILDLFR70D048 70mm Copper - Yes Yes Yes 85 x 83mm 12 7 8 Lamp not included. Choose a suitable light from a variety of high-quality GU10 lamps (Page 14) Evolight fitted in a downlight Example: Use ILDLFR70D001 + ILMDC001 to achieve a profile as low as 38.5mm Evolight for Perfect for installing downlights in low-profile areas. 38.5mm + =
Multi Pack Insulation Guard GU10 Holder
70mm cut-out Recessed
EVOFIRE RECESSED FOR LOW GLARE
Make your space attractive at a reasonable cost. Architects and lighting designers recommend recessed downlights where the lamp is held higher in the ceiling for low glare and softer light. The ultra-thin bezel adds to a smart appearance when the light is on or off in any room. You can choose from a range of GU10 lamps to give the most appropriate lighting effect and brightness.
70-100mm Evofire adapters
For the full specification go to www.integral-LED.com 10
Holder connector Diameter x Depth Pic. Round Recessed ILDLFR70E001 70mm White - - Yes Yes 85 x 38mm 1 ILDLFR70E003 70mm White - Yes Yes Yes 85 x 109mm 2 Satin Nickel Round Recessed ILDLFR70E002 70mm Satin Nickel - - Yes Yes 85 x 38mm 3 ILDLFR70E004 70mm Satin Nickel - Yes Yes Yes 85 x 109mm 4 3 year warranty 1 2 4
Lamp not included. Choose a suitable light from a variety of high-quality GU10 lamps (Page 14) Product Code Cut-out mm Finish Pic. Round Evofire Adapters ILDLFR70D005 70-100mm White 1 ILDLFR70D006 70-100mm Satin Nickel 2 ILDLFR70D019 70-100mm Polished Chrome 3 ILDLFR70D030 70-100mm Black 4 ILDLFR70D049 70-100mm Antique Brass 5 ILDLFR70D050 70-100mm Copper 6 3 year warranty 1 2 3 5 4 6
An add-on bezel for refurbs and replacing old downlights with a range of cut-outs - reduces the need for ceiling redecoration.
70-100mm cut-out Round
EVOFIRE 70-100MM CUT-OUTS FOR FLEXIBILITY
Ideal for new builds, refurbs and replacing old downlights where a range of cut-outs are needed - also reduces the need for ceiling redecoration. The ultra-thin bezel adds to a smart appearance when the light is on or off in any room.
For the full specification go to www.integral-LED.com 11
Product Code Cut-out mm Finish Insulation Guard GU10 Holder Loop-in/out connector Diameter x Depth Pic. White Round ILDLFR70D015 70-100mm White - Yes Yes 110 x 38mm 1 ILDLFR70D013 70-100mm White Yes Yes Yes 110 x 83mm 2 Satin Nickel Round ILDLFR70D016 70-100mm Satin Nickel - Yes Yes 110 x 38mm 3 ILDLFR70D014 70-100mm Satin Nickel Yes Yes Yes 110 x 83mm 4 Polished Chrome Round ILDLFR70D021 70-100mm Polished Chrome - Yes Yes 110 x 38mm 5 ILDLFR70D020 70-100mm Polished Chrome Yes Yes Yes 110 x 83mm 6 3 year warranty 5 6 Lamp not included. Choose a suitable light from a variety of high-quality GU10 lamps (Page 14)
70mm cut-out Square
Get the full benefit of Evofire downlights from a varied selection of Integral LED GU10 lamps.
REAL COLOUR GU10
• High colour rendering (CRI 95) - bring out the colours in your room
• Closest lamp to halogen (CRI 100)
• Glass GU10 bulb great for open fittings
• Premium light at an affordable price
WARMTONE GU10
• The light gets warmer as you dim
• Create a cosy atmosphere in your home & hospitality environment
CLASSIC GU10
• Great value and performance
• Equivalent light to a 50W halogen
• Classic look and feel
CLASSIC HIGH LUMEN GU10
• Our brightest GU10
• Classic look and feel
• 55° Beam angle option
GLASS GU10
• Attractive glass body, similar to Halogen look
• Reflects light from rear of the lamp
• Ideal for fittings where the lamp is exposed
For the full specification go to www.integral-LED.com 12 PREMIUM RANGE 1 3 4 5
PREMIUM RANGE 2 Product Code Watts Temp K Lumens Dim Beam Angle Pic. REAL COLOUR GU10 CRI > 95 ILGU10DD112 5 3000 400lm Yes 36° 1 ILGU10DE113 5 4000 420lm Yes 36° 1 WARMTONE GU10 ILGU10DC121 3.6W 1800-2700 400lm Yes 36° 2 CLASSIC GU10 ILGU10NC102 3.6 2700 400lm - 36° 3 ILGU10NE103 3.6 4000 400lm - 36° 3 ILGU10NG104 4.0 6500 390lm - 36° 3 ILGU10DC109 3.6 2700 400lm Yes 36° 3 ILGU10DE110 3.6 4000 400lm Yes 36° 3 ILGU10DG111 3.6 6500 400lm Yes 36° 3 CLASSIC HIGH LUMEN GU10 ILGU10NC114 4.9 2700 590lm - 36° 4 ILGU10NE115 4.9 4000 590lm - 36° 4 ILGU10NG116 4.9 6500 590lm - 36° 4 ILGU10DC117 5.7 2700 600lm Yes 36° 4 ILGU10DD120 5.7 3000 600lm Yes 36° 4 ILGU10DE118 6.0 4000 640lm Yes 36° 4 ILGU10DG119 6.0 6500 640lm Yes 36° 4 ILGU10DC100 4.9 2700 520lm Yes 55° 4 ILGU10DE101 4.9 4000 520lm Yes 55° 4 GLASS GU10 ILGU10NC083 3.6 2700 400lm - 36° 5 ILGU10NE084 3.6 4000 400lm - 36° 5 ILGU10NG085 3.6 6500 400lm - 36° 5 ILGU10DC086 3.6W 2700 400lm Yes 36° 5 ILGU10DE087 5.6W 4000 450lm Yes 36° 5 ILGU10DG088 5.6W 6500 450lm Yes 36° 5
Holder connector ILDLFR70D007 70mm White - - Yes Yes 85 x 40mm 1 ILDLFR70D009 70mm White - Yes Yes Yes 85 x 83mm 2 Satin Nickel Square ILDLFR70D008 70mm Satin Nickel - - Yes Yes 85 x 40mm 3 ILDLFR70D010 70mm Satin Nickel - Yes Yes Yes 85 x 83mm 4 3 year warranty Lamp not included. Choose a suitable light from a variety of high-quality GU10 lamps (Page 14)
Evolight
INTRODUCING THE QUICK AND EASY ALTERNATIVE FOR MR16 INSTALLATIONS
All in one solution - easy to install in a downlight No need for a lamp holder or transformer
29mm
50mm diameter (same as GU10/MR16 lamps)
• Low profile - only 29mm high
• No need for a separate driver –direct power connection
• Easy fit with 28cm cable and loop-in/out connector
• Compatible with dimmable and non-dimmable circuits
Includes Fast-Fit screwless - push-fit junction box for tool-free assembly
LOW PROFILE - MR16 REPLACEMENT REPLACES GU10 GU10 Lamp GU10 Holder MR16 Lamp MR16 Holder MR16 Transformer REPLACES MR16 WITHOUT JUNCTION BOX Product Code Watts Temp K Lumens Dim Beam Junction Box ILMDC001 3.8W 2700 410lm Yes 36°ILMDE002 3.8W 4000 420lm Yes 36°WITH JUNCTION BOX ILMDC003 3.8W 2700 410lm Yes 36° Yes ILMDE004 3.8W 4000 420lm Yes 36° Yes Evolight fitted in a downlight Example: Use ILDLFR70D001 + ILMDC001 to achieve a profile as low as 38.5mm Evolight for
for installing downlights in low-profile areas. 38.5mm + = For the full specification go to www.integral-LED.com 13
Perfect
UK Head Office
Unit 6 Iron Bridge Close
Iron Bridge Business Park
London, NW10 0UF United Kingdom
London North/Herts/Bucks/Beds
Carl Davey
Key Account Manager
Tel: 07827 352469 carl.davey@integral-led.com
London South/Essex/Surrey/Berkshire
Dean Davey
Key Account Manager
Tel: 07827 352466 dean.davey@integral-led.com
East Midlands/East Anglia/ Cambridgeshire
Jamie Reece
Key Account Manager
Tel: 07966 999588 james.reece@integral-led.com
Devon/Cornwall/Somerset/Wilts/ Oxfordshire/Glos/South Wales/ Channel Islands
Pete Lawrence
Key Account Manager
Tel: 07966 999543 peter.lawrence@integral-led.com
IN-STORE DISPLAY AVAILABLE PLEASE CONTACT US
Tel: +44(0)208 451 8700
Fax: +44(0)208 459 6301 ledsales@integral-led.com www.integral-LED.com
Integral LED is a division of Integral Memory plc.
North West England/North Wales
Lesley Moorhouse
Key Account Manager
Tel: 07827 352460 lesley.moorhouse@integral-led.com
West Midland/Northants/Worcs/ Herefordshire/Staffs/Shrops/Mid Wales
Neil Chopra - Key Account Manager Tel: 07949 712293 neil.chopra@integral-led.com
Kent (outside M25)/E&W Sussex/ Hampshire/I.O.W/Dorset
Jon Nixon
Key Account Manager
Tel: 07769 142847 jon.nixon@integral-led.com
North East England
Graham Mason
Key Account Manager
Tel: 07966 999544 graham.mason@integral-led.com
Scotland & Northern Ireland
Barry Ferguson
Key Account Manager Tel: 07827 352462 barry.ferguson@integral-led.com
integralLED integral-LED @integral_led @integralLED All Trademarks Acknowledged. E&OE Product specifications subject to change without notice.
the QR code to watch our Evofire video
Scan
